arm64: dts: qcom: add apq8096sg-db820c, AP8096SG variant of DB820c

There has been a (rare) variant of Dragonboard 820c, utilizing Pro
version of the SoC, with the major difference being CPU and GPU clock
tables. Add a DT file representing this version of the board.

01:13:26.275: B -    417880 - 8996 Pro v1.x detected, Max frequency = 1.8 GHz

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111-db820c-pro-v1-2-6eece16c5c23@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

4 files changed, 1150 insertions, 1125 deletions

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 317af937d038..3ca581061236 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-schneider-hmibsc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8039-t2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8096sg-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= glymur-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-iot-evk.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 9fa70ff6887b..47b4568e4039 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -6,1133 +6,9 @@
 /dts-v1/;
 
 #include "msm8996.dtsi"
-#include "pm8994.dtsi"
-#include "pmi8994.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-#include <dt-bindings/sound/qcom,wcd9335.h>
-
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- *         NC      = not connected (pin out but not routed from the chip to
- *                   anything the board)
- *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
- *         LSEC    = Low Speed External Connector
- *         P HSEC  = Primary High Speed External Connector
- *         S HSEC  = Secondary High Speed External Connector
- *         J14     = Camera Connector
- *         TP      = Test Points
- *
- * Line names are taken from the schematic "DragonBoard 820c",
- * drawing no: LM25-P2751-1
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
+#include "apq8096-db820c.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. DB820c";
 	compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
-
-	aliases {
-		serial0 = &blsp2_uart2;
-		serial1 = &blsp2_uart3;
-		serial2 = &blsp1_uart2;
-		i2c0 = &blsp1_i2c3;
-		i2c1 = &blsp2_i2c1;
-		i2c2 = &blsp2_i2c1;
-		spi0 = &blsp1_spi1;
-		spi1 = &blsp2_spi6;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	div1_mclk: divclk1 {
-		compatible = "gpio-gate-clock";
-		pinctrl-0 = <&audio_mclk>;
-		pinctrl-names = "default";
-		clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
-		#clock-cells = <0>;
-		enable-gpios = <&pm8994_gpios 15 0>;
-	};
-
-	divclk4: divclk4 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "divclk4";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&divclk4_pin_a>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&volume_up_gpio>;
-
-		button {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	usb2_id: usb2-id {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_det_gpio>;
-	};
-
-	usb3_id: usb3-id {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_det_gpio>;
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-always-on;
-		regulator-boot-on;
-
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-	};
-
-	wlan_en: wlan-en-1-8v {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_en_gpios>;
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&pm8994_gpios 8 0>;
-
-		/* WLAN card specific delay */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&blsp1_i2c3 {
-	/* On Low speed expansion: LS-I2C0 */
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	/* On Low speed expansion */
-	status = "okay";
-};
-
-&blsp1_uart2 {
-	label = "BT-UART";
-	status = "okay";
-
-	bluetooth {
-		compatible = "qcom,qca6174-bt";
-
-		/* bt_disable_n gpio */
-		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
-
-		clocks = <&divclk4>;
-	};
-};
-
-&adsp_pil {
-	status = "okay";
-	firmware-name = "qcom/apq8096/adsp.mbn";
-};
-
-&blsp2_i2c1 {
-	/* On High speed expansion: HS-I2C2 */
-	status = "okay";
-};
-
-&blsp2_i2c1 {
-	/* On Low speed expansion: LS-I2C1 */
-	status = "okay";
-};
-
-&blsp2_spi6 {
-	/* On High speed expansion */
-	status = "okay";
-};
-
-&blsp2_uart2 {
-	label = "LS-UART1";
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart2_2pins_default>;
-	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
-};
-
-&blsp2_uart3 {
-	label = "LS-UART0";
-	status = "disabled";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart3_4pins_default>;
-	pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
-};
-
-&camss {
-	vdda-supply = <&vreg_l2a_1p25>;
-};
-
-&gpu {
-	status = "okay";
-};
-
-&gpu_zap_shader {
-	firmware-name = "qcom/apq8096/a530_zap.mbn";
-};
-
-&hsusb_phy1 {
-	status = "okay";
-
-	vdd-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&hsusb_phy2 {
-	status = "okay";
-
-	vdd-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&mdp {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_hdmi {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
-	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
-
-	core-vdda-supply = <&vreg_l12a_1p8>;
-	core-vcc-supply = <&vreg_s4a_1p8>;
-};
-
-&mdss_hdmi_phy {
-	status = "okay";
-
-	vddio-supply = <&vreg_l12a_1p8>;
-	vcca-supply = <&vreg_l28a_0p925>;
-	#phy-cells = <0>;
-};
-
-&mmcc {
-	vdd-gfx-supply = <&vdd_gfx>;
-};
-
-&mss_pil {
-	status = "okay";
-	pll-supply = <&vreg_l12a_1p8>;
-	firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn";
-};
-
-&pm8994_resin {
-	status = "okay";
-	linux,code = <KEY_VOLUMEDOWN>;
-};
-
-&tlmm {
-	gpio-line-names =
-		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
-		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
-		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
-		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
-		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
-		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
-		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
-		"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
-		"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
-		"TP93", /* GPIO_9 */
-		"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
-		"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
-		"NC", /* GPIO_12 */
-		"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
-		"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
-		"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
-		"TP99", /* GPIO_16 */
-		"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
-		"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
-		"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
-		"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
-		"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
-		"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
-		"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
-		"GPIO-D", /* GPIO_24, LSEC pin 26 */
-		"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
-		"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
-		"BLSP6_I2C_SDA", /* GPIO_27 */
-		"BLSP6_I2C_SCL", /* GPIO_28 */
-		"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
-		"GPIO30", /* GPIO_30, S HSEC pin 4 */
-		"HDMI_CEC", /* GPIO_31 */
-		"HDMI_DDC_CLOCK", /* GPIO_32 */
-		"HDMI_DDC_DATA", /* GPIO_33 */
-		"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
-		"PCIE0_RST_N", /* GPIO_35 */
-		"PCIE0_CLKREQ_N", /* GPIO_36 */
-		"PCIE0_WAKE", /* GPIO_37 */
-		"SD_CARD_DET_N", /* GPIO_38 */
-		"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
-		"W_DISABLE_N", /* GPIO_40 */
-		"[BLSP9_UART_TX]", /* GPIO_41 */
-		"[BLSP9_UART_RX]", /* GPIO_42 */
-		"[BLSP2_UART_CTS_N]", /* GPIO_43 */
-		"[BLSP2_UART_RFR_N]", /* GPIO_44 */
-		"[BLSP3_UART_TX]", /* GPIO_45 */
-		"[BLSP3_UART_RX]", /* GPIO_46 */
-		"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
-		"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
-		"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
-		"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
-		"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
-		"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
-		"[CODEC_INT1_N]", /* GPIO_53 */
-		"[CODEC_INT2_N]", /* GPIO_54 */
-		"[BLSP7_I2C_SDA]", /* GPIO_55 */
-		"[BLSP7_I2C_SCL]", /* GPIO_56 */
-		"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
-		"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
-		"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
-		"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
-		"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
-		"GPIO-E", /* GPIO_62, LSEC pin 27 */
-		"TP87", /* GPIO_63 */
-		"[CODEC_RST_N]", /* GPIO_64 */
-		"[PCM1_CLK]", /* GPIO_65 */
-		"[PCM1_SYNC]", /* GPIO_66 */
-		"[PCM1_DIN]", /* GPIO_67 */
-		"[PCM1_DOUT]", /* GPIO_68 */
-		"AUDIO_REF_CLK", /* GPIO_69 */
-		"SLIMBUS_CLK", /* GPIO_70 */
-		"SLIMBUS_DATA0", /* GPIO_71 */
-		"SLIMBUS_DATA1", /* GPIO_72 */
-		"NC", /* GPIO_73 */
-		"NC", /* GPIO_74 */
-		"NC", /* GPIO_75 */
-		"NC", /* GPIO_76 */
-		"TP94", /* GPIO_77 */
-		"NC", /* GPIO_78 */
-		"TP95", /* GPIO_79 */
-		"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
-		"TP88", /* GPIO_81 */
-		"TP89", /* GPIO_82 */
-		"TP90", /* GPIO_83 */
-		"TP91", /* GPIO_84 */
-		"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
-		"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
-		"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
-		"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
-		"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
-		"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
-		"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
-		"NC", /* GPIO_92 */
-		"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
-		"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
-		"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
-		"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
-		"NC", /* GPIO_97 */
-		"CAM1_STANDBY_N", /* GPIO_98 */
-		"NC", /* GPIO_99 */
-		"NC", /* GPIO_100 */
-		"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
-		"BOOT_CONFIG1", /* GPIO_102 */
-		"USB_HUB_RESET", /* GPIO_103 */
-		"CAM1_RST_N", /* GPIO_104 */
-		"NC", /* GPIO_105 */
-		"NC", /* GPIO_106 */
-		"NC", /* GPIO_107 */
-		"NC", /* GPIO_108 */
-		"NC", /* GPIO_109 */
-		"NC", /* GPIO_110 */
-		"NC", /* GPIO_111 */
-		"NC", /* GPIO_112 */
-		"PMI8994_BUA", /* GPIO_113 */
-		"PCIE2_RST_N", /* GPIO_114 */
-		"PCIE2_CLKREQ_N", /* GPIO_115 */
-		"PCIE2_WAKE", /* GPIO_116 */
-		"SSC_IRQ_0", /* GPIO_117 */
-		"SSC_IRQ_1", /* GPIO_118 */
-		"SSC_IRQ_2", /* GPIO_119 */
-		"NC", /* GPIO_120 */
-		"GPIO121", /* GPIO_121, S HSEC pin 2 */
-		"NC", /* GPIO_122 */
-		"SSC_IRQ_6", /* GPIO_123 */
-		"SSC_IRQ_7", /* GPIO_124 */
-		"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
-		"BOOT_CONFIG5", /* GPIO_126 */
-		"NC", /* GPIO_127 */
-		"NC", /* GPIO_128 */
-		"BOOT_CONFIG7", /* GPIO_129 */
-		"PCIE1_RST_N", /* GPIO_130 */
-		"PCIE1_CLKREQ_N", /* GPIO_131 */
-		"PCIE1_WAKE", /* GPIO_132 */
-		"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
-		"NC", /* GPIO_134 */
-		"NC", /* GPIO_135 */
-		"BOOT_CONFIG8", /* GPIO_136 */
-		"NC", /* GPIO_137 */
-		"NC", /* GPIO_138 */
-		"GPS_SSBI2", /* GPIO_139 */
-		"GPS_SSBI1", /* GPIO_140 */
-		"NC", /* GPIO_141 */
-		"NC", /* GPIO_142 */
-		"NC", /* GPIO_143 */
-		"BOOT_CONFIG6", /* GPIO_144 */
-		"NC", /* GPIO_145 */
-		"NC", /* GPIO_146 */
-		"NC", /* GPIO_147 */
-		"NC", /* GPIO_148 */
-		"NC"; /* GPIO_149 */
-
-	sdc2_cd_on: sdc2-cd-on-state {
-		pins = "gpio38";
-		function = "gpio";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sdc2_cd_off: sdc2-cd-off-state {
-		pins = "gpio38";
-		function = "gpio";
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
-	hdmi_hpd_active: hdmi-hpd-active-state {
-		pins = "gpio34";
-		function = "hdmi_hot";
-		bias-pull-down;
-		drive-strength = <16>;
-	};
-
-	hdmi_hpd_suspend: hdmi-hpd-suspend-state {
-		pins = "gpio34";
-		function = "hdmi_hot";
-		bias-pull-down;
-		drive-strength = <2>;
-	};
-
-	hdmi_ddc_active: hdmi-ddc-active-state {
-		pins = "gpio32", "gpio33";
-		function = "hdmi_ddc";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	hdmi_ddc_suspend: hdmi-ddc-suspend-state {
-		pins = "gpio32", "gpio33";
-		function = "hdmi_ddc";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	vddpe-3v3-supply = <&wlan_en>;
-	vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie1 {
-	status = "okay";
-	perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
-	vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie2 {
-	status = "okay";
-	perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
-	vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&pm8994_gpios {
-	gpio-line-names =
-		"NC",
-		"KEY_VOLP_N",
-		"NC",
-		"BL1_PWM",
-		"GPIO-F", /* BL0_PWM, LSEC pin 28 */
-		"BL1_EN",
-		"NC",
-		"WLAN_EN",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"DIVCLK1",
-		"DIVCLK2",
-		"DIVCLK3",
-		"DIVCLK4",
-		"BT_EN",
-		"PMIC_SLB",
-		"PMIC_BUA",
-		"USB_VBUS_DET";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
-	ls_exp_gpio_f: pm8994-gpio5-state {
-		pinconf {
-			pins = "gpio5";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-
-	bt_en_gpios: bt-en-pios-state {
-		pinconf {
-			pins = "gpio19";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	wlan_en_gpios: wlan-en-gpios-state {
-		pinconf {
-			pins = "gpio8";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	audio_mclk: clk-div1-state {
-		pinconf {
-			pins = "gpio15";
-			function = "func1";
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-
-	volume_up_gpio: pm8996-gpio2-state {
-		pinconf {
-			pins = "gpio2";
-			function = "normal";
-			input-enable;
-			drive-push-pull;
-			bias-pull-up;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-
-	divclk4_pin_a: divclk4-state {
-		pinconf {
-			pins = "gpio18";
-			function = PMIC_GPIO_FUNC_FUNC2;
-
-			bias-disable;
-			power-source = <PM8994_GPIO_S4>;
-		};
-	};
-
-	usb3_vbus_det_gpio: pm8996-gpio22-state {
-		pinconf {
-			pins = "gpio22";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-};
-
-&pm8994_mpps {
-	gpio-line-names =
-		"VDDPX_BIAS",
-		"WIFI_LED",
-		"NC",
-		"BT_LED",
-		"PM_MPP05",
-		"PM_MPP06",
-		"PM_MPP07",
-		"NC";
-};
-
-&pm8994_spmi_regulators {
-	qcom,saw-reg = <&saw3>;
-	vdd_s11-supply = <&vph_pwr>;
-
-	s9 {
-		qcom,saw-slave;
-	};
-	s10 {
-		qcom,saw-slave;
-	};
-	s11 {
-		qcom,saw-leader;
-		regulator-name = "VDD_APCC";
-		regulator-always-on;
-		regulator-min-microvolt = <980000>;
-		regulator-max-microvolt = <980000>;
-	};
-};
-
-&pmi8994_gpios {
-	gpio-line-names =
-		"NC",
-		"SPKR_AMP_EN1",
-		"SPKR_AMP_EN2",
-		"TP61",
-		"NC",
-		"USB2_VBUS_DET",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-
-	usb2_vbus_det_gpio: pmi8996-gpio6-state {
-		pinconf {
-			pins = "gpio6";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-};
-
-&pmi8994_lpg {
-	qcom,power-source = <1>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmi8994_mpp2_userled4>;
-
-	qcom,dtest = <0 0>,
-		     <0 0>,
-		     <0 0>,
-		     <4 1>;
-
-	status = "okay";
-
-	led@1 {
-		reg = <1>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <1>;
-
-		linux,default-trigger = "heartbeat";
-		default-state = "on";
-	};
-
-	led@2 {
-		reg = <2>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <0>;
-	};
-
-	led@3 {
-		reg = <3>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <2>;
-	};
-
-	led@4 {
-		reg = <4>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <3>;
-	};
-};
-
-&pmi8994_mpps {
-	pmi8994_mpp2_userled4: mpp2-userled4-state {
-		pins = "mpp2";
-		function = "sink";
-
-		output-low;
-		qcom,dtest = <4>;
-	};
-};
-
-&pmi8994_spmi_regulators {
-	vdd_s2-supply = <&vph_pwr>;
-
-	vdd_gfx: s2 {
-		regulator-name = "VDD_GFX";
-		regulator-min-microvolt = <980000>;
-		regulator-max-microvolt = <980000>;
-	};
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8994-regulators";
-
-		vdd_s1-supply = <&vph_pwr>;
-		vdd_s2-supply = <&vph_pwr>;
-		vdd_s3-supply = <&vph_pwr>;
-		vdd_s4-supply = <&vph_pwr>;
-		vdd_s5-supply = <&vph_pwr>;
-		vdd_s6-supply = <&vph_pwr>;
-		vdd_s7-supply = <&vph_pwr>;
-		vdd_s8-supply = <&vph_pwr>;
-		vdd_s9-supply = <&vph_pwr>;
-		vdd_s10-supply = <&vph_pwr>;
-		vdd_s11-supply = <&vph_pwr>;
-		vdd_s12-supply = <&vph_pwr>;
-		vdd_l1-supply = <&vreg_s1b_1p025>;
-		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
-		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
-		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
-		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
-		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
-		vdd_l8_l16_l30-supply = <&vph_pwr>;
-		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
-		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
-		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
-		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
-		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
-		vdd_l25-supply = <&vreg_s3a_1p3>;
-		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
-
-		vreg_s3a_1p3: s3 {
-			regulator-name = "vreg_s3a_1p3";
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		/**
-		 * 1.8v required on LS expansion
-		 * for mezzanine boards
-		 */
-		vreg_s4a_1p8: s4 {
-			regulator-name = "vreg_s4a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-		vreg_s5a_2p15: s5 {
-			regulator-name = "vreg_s5a_2p15";
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-		};
-		vreg_s7a_1p0: s7 {
-			regulator-name = "vreg_s7a_1p0";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-		};
-
-		vreg_l1a_1p0: l1 {
-			regulator-name = "vreg_l1a_1p0";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-		vreg_l2a_1p25: l2 {
-			regulator-name = "vreg_l2a_1p25";
-			regulator-min-microvolt = <1250000>;
-			regulator-max-microvolt = <1250000>;
-		};
-		vreg_l3a_0p875: l3 {
-			regulator-name = "vreg_l3a_0p875";
-			regulator-min-microvolt = <850000>;
-			regulator-max-microvolt = <850000>;
-		};
-		vreg_l4a_1p225: l4 {
-			regulator-name = "vreg_l4a_1p225";
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-		vreg_l6a_1p2: l6 {
-			regulator-name = "vreg_l6a_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		vreg_l8a_1p8: l8 {
-			regulator-name = "vreg_l8a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l9a_1p8: l9 {
-			regulator-name = "vreg_l9a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l10a_1p8: l10 {
-			regulator-name = "vreg_l10a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l11a_1p15: l11 {
-			regulator-name = "vreg_l11a_1p15";
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-		};
-		vreg_l12a_1p8: l12 {
-			regulator-name = "vreg_l12a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l13a_2p95: l13 {
-			regulator-name = "vreg_l13a_2p95";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		vreg_l14a_1p8: l14 {
-			regulator-name = "vreg_l14a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l15a_1p8: l15 {
-			regulator-name = "vreg_l15a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l16a_2p7: l16 {
-			regulator-name = "vreg_l16a_2p7";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		vreg_l17a_2p8: l17 {
-			regulator-name = "vreg_l17a_2p8";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-		vreg_l18a_2p85: l18 {
-			regulator-name = "vreg_l18a_2p85";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2900000>;
-		};
-		vreg_l19a_2p8: l19 {
-			regulator-name = "vreg_l19a_2p8";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-		vreg_l20a_2p95: l20 {
-			regulator-name = "vreg_l20a_2p95";
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-allow-set-load;
-		};
-		vreg_l21a_2p95: l21 {
-			regulator-name = "vreg_l21a_2p95";
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-allow-set-load;
-			regulator-system-load = <200000>;
-		};
-		vreg_l22a_3p0: l22 {
-			regulator-name = "vreg_l22a_3p0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-		vreg_l23a_2p8: l23 {
-			regulator-name = "vreg_l23a_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-		vreg_l24a_3p075: l24 {
-			regulator-name = "vreg_l24a_3p075";
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-		vreg_l25a_1p2: l25 {
-			regulator-name = "vreg_l25a_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-allow-set-load;
-		};
-		vreg_l26a_0p8: l27 {
-			regulator-name = "vreg_l26a_0p8";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-		vreg_l28a_0p925: l28 {
-			regulator-name = "vreg_l28a_0p925";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <925000>;
-			regulator-allow-set-load;
-		};
-		vreg_l29a_2p8: l29 {
-			regulator-name = "vreg_l29a_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-		vreg_l30a_1p8: l30 {
-			regulator-name = "vreg_l30a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l32a_1p8: l32 {
-			regulator-name = "vreg_l32a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		vreg_lvs1a_1p8: lvs1 {
-			regulator-name = "vreg_lvs1a_1p8";
-		};
-
-		vreg_lvs2a_1p8: lvs2 {
-			regulator-name = "vreg_lvs2a_1p8";
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,rpm-pmi8994-regulators";
-
-		vdd_s1-supply = <&vph_pwr>;
-		vdd_s2-supply = <&vph_pwr>;
-		vdd_s3-supply = <&vph_pwr>;
-		vdd_bst_byp-supply = <&vph_pwr>;
-
-		vph_pwr_bbyp: boost-bypass {
-			regulator-name = "vph_pwr_bbyp";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		vreg_s1b_1p025: s1 {
-			regulator-name = "vreg_s1b_1p025";
-			regulator-min-microvolt = <1025000>;
-			regulator-max-microvolt = <1025000>;
-		};
-	};
-};
-
-&sdhc2 {
-	/* External SD card */
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
-	pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
-	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vreg_l21a_2p95>;
-	vqmmc-supply = <&vreg_l13a_2p95>;
-	status = "okay";
-};
-
-&q6asmdai {
-	dai@0 {
-		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
-	};
-
-	dai@1 {
-		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
-	};
-
-	dai@2 {
-		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
-	};
-};
-
-&slim_msm {
-	status = "okay";
-
-	slim@1 {
-		reg = <1>;
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		tasha_ifd: tas-ifd@0,0 {
-			compatible = "slim217,1a0";
-			reg = <0 0>;
-		};
-
-		wcd9335: codec@1,0 {
-			compatible = "slim217,1a0";
-			reg = <1 0>;
-
-			clock-names = "mclk", "slimbus";
-			clocks = <&div1_mclk>,
-				 <&rpmcc RPM_SMD_BB_CLK1>;
-			interrupt-parent = <&tlmm>;
-			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
-				     <53 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "intr1", "intr2";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
-			pinctrl-names = "default";
-
-			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
-			slim-ifc-dev = <&tasha_ifd>;
-
-			#sound-dai-cells = <1>;
-
-			vdd-buck-supply = <&vreg_s4a_1p8>;
-			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
-			vdd-tx-supply = <&vreg_s4a_1p8>;
-			vdd-rx-supply = <&vreg_s4a_1p8>;
-			vdd-io-supply = <&vreg_s4a_1p8>;
-		};
-	};
-};
-
-&sound {
-	compatible = "qcom,apq8096-sndcard";
-	model = "DB820c";
-	audio-routing = "RX_BIAS", "MCLK";
-
-	mm1-dai-link {
-		link-name = "MultiMedia1";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
-		};
-	};
-
-	mm2-dai-link {
-		link-name = "MultiMedia2";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
-		};
-	};
-
-	mm3-dai-link {
-		link-name = "MultiMedia3";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
-		};
-	};
-
-	hdmi-dai-link {
-		link-name = "HDMI";
-		cpu {
-			sound-dai = <&q6afedai HDMI_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&mdss_hdmi 0>;
-		};
-	};
-
-	slim-dai-link {
-		link-name = "SLIM Playback";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_6_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&wcd9335 AIF4_PB>;
-		};
-	};
-
-	slimcap-dai-link {
-		link-name = "SLIM Capture";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_0_TX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&wcd9335 AIF1_CAP>;
-		};
-	};
-};
-
-&ufsphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&ufshc {
-	status = "okay";
-
-	vcc-supply = <&vreg_l20a_2p95>;
-	vccq-supply = <&vreg_l25a_1p2>;
-	vccq2-supply = <&vreg_s4a_1p8>;
-	vdd-hba-supply = <&vreg_l25a_1p2>;
-
-	vcc-max-microamp = <600000>;
-	vccq-max-microamp = <450000>;
-	vccq2-max-microamp = <450000>;
-};
-
-&usb2 {
-	status = "okay";
-	extcon = <&usb2_id>;
-};
-
-&usb2_dwc3 {
-	extcon = <&usb2_id>;
-	dr_mode = "otg";
-	maximum-speed = "high-speed";
-};
-
-&usb3 {
-	status = "okay";
-	extcon = <&usb3_id>;
-};
-
-&usb3_dwc3 {
-	extcon = <&usb3_id>;
-	dr_mode = "otg";
-};
-
-&usb3phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&venus {
-	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
new file mode 100644
index 000000000000..0c076852b494
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -0,0 +1,1133 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ */
+
+
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC      = not connected (pin out but not routed from the chip to
+ *                   anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC    = Low Speed External Connector
+ *         P HSEC  = Primary High Speed External Connector
+ *         S HSEC  = Secondary High Speed External Connector
+ *         J14     = Camera Connector
+ *         TP      = Test Points
+ *
+ * Line names are taken from the schematic "DragonBoard 820c",
+ * drawing no: LM25-P2751-1
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
+/ {
+	aliases {
+		serial0 = &blsp2_uart2;
+		serial1 = &blsp2_uart3;
+		serial2 = &blsp1_uart2;
+		i2c0 = &blsp1_i2c3;
+		i2c1 = &blsp2_i2c1;
+		i2c2 = &blsp2_i2c1;
+		spi0 = &blsp1_spi1;
+		spi1 = &blsp2_spi6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	div1_mclk: divclk1 {
+		compatible = "gpio-gate-clock";
+		pinctrl-0 = <&audio_mclk>;
+		pinctrl-names = "default";
+		clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+		#clock-cells = <0>;
+		enable-gpios = <&pm8994_gpios 15 0>;
+	};
+
+	divclk4: divclk4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "divclk4";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&divclk4_pin_a>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		button {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb2_id: usb2-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_det_gpio>;
+	};
+
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_det_gpio>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c3 {
+	/* On Low speed expansion: LS-I2C0 */
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	/* On Low speed expansion */
+	status = "okay";
+};
+
+&blsp1_uart2 {
+	label = "BT-UART";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		/* bt_disable_n gpio */
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		clocks = <&divclk4>;
+	};
+};
+
+&adsp_pil {
+	status = "okay";
+	firmware-name = "qcom/apq8096/adsp.mbn";
+};
+
+&blsp2_i2c1 {
+	/* On High speed expansion: HS-I2C2 */
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	/* On Low speed expansion: LS-I2C1 */
+	status = "okay";
+};
+
+&blsp2_spi6 {
+	/* On High speed expansion */
+	status = "okay";
+};
+
+&blsp2_uart2 {
+	label = "LS-UART1";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+};
+
+&blsp2_uart3 {
+	label = "LS-UART0";
+	status = "disabled";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart3_4pins_default>;
+	pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/apq8096/a530_zap.mbn";
+};
+
+&hsusb_phy1 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&hsusb_phy2 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_hdmi {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+	core-vdda-supply = <&vreg_l12a_1p8>;
+	core-vcc-supply = <&vreg_s4a_1p8>;
+};
+
+&mdss_hdmi_phy {
+	status = "okay";
+
+	vddio-supply = <&vreg_l12a_1p8>;
+	vcca-supply = <&vreg_l28a_0p925>;
+	#phy-cells = <0>;
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+	status = "okay";
+	pll-supply = <&vreg_l12a_1p8>;
+	firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn";
+};
+
+&pm8994_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&tlmm {
+	gpio-line-names =
+		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+		"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+		"TP93", /* GPIO_9 */
+		"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+		"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+		"NC", /* GPIO_12 */
+		"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+		"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+		"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+		"TP99", /* GPIO_16 */
+		"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+		"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+		"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+		"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+		"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+		"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+		"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+		"GPIO-D", /* GPIO_24, LSEC pin 26 */
+		"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+		"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+		"BLSP6_I2C_SDA", /* GPIO_27 */
+		"BLSP6_I2C_SCL", /* GPIO_28 */
+		"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+		"GPIO30", /* GPIO_30, S HSEC pin 4 */
+		"HDMI_CEC", /* GPIO_31 */
+		"HDMI_DDC_CLOCK", /* GPIO_32 */
+		"HDMI_DDC_DATA", /* GPIO_33 */
+		"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+		"PCIE0_RST_N", /* GPIO_35 */
+		"PCIE0_CLKREQ_N", /* GPIO_36 */
+		"PCIE0_WAKE", /* GPIO_37 */
+		"SD_CARD_DET_N", /* GPIO_38 */
+		"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+		"W_DISABLE_N", /* GPIO_40 */
+		"[BLSP9_UART_TX]", /* GPIO_41 */
+		"[BLSP9_UART_RX]", /* GPIO_42 */
+		"[BLSP2_UART_CTS_N]", /* GPIO_43 */
+		"[BLSP2_UART_RFR_N]", /* GPIO_44 */
+		"[BLSP3_UART_TX]", /* GPIO_45 */
+		"[BLSP3_UART_RX]", /* GPIO_46 */
+		"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+		"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+		"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+		"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+		"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+		"[CODEC_INT1_N]", /* GPIO_53 */
+		"[CODEC_INT2_N]", /* GPIO_54 */
+		"[BLSP7_I2C_SDA]", /* GPIO_55 */
+		"[BLSP7_I2C_SCL]", /* GPIO_56 */
+		"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+		"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+		"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+		"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+		"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+		"GPIO-E", /* GPIO_62, LSEC pin 27 */
+		"TP87", /* GPIO_63 */
+		"[CODEC_RST_N]", /* GPIO_64 */
+		"[PCM1_CLK]", /* GPIO_65 */
+		"[PCM1_SYNC]", /* GPIO_66 */
+		"[PCM1_DIN]", /* GPIO_67 */
+		"[PCM1_DOUT]", /* GPIO_68 */
+		"AUDIO_REF_CLK", /* GPIO_69 */
+		"SLIMBUS_CLK", /* GPIO_70 */
+		"SLIMBUS_DATA0", /* GPIO_71 */
+		"SLIMBUS_DATA1", /* GPIO_72 */
+		"NC", /* GPIO_73 */
+		"NC", /* GPIO_74 */
+		"NC", /* GPIO_75 */
+		"NC", /* GPIO_76 */
+		"TP94", /* GPIO_77 */
+		"NC", /* GPIO_78 */
+		"TP95", /* GPIO_79 */
+		"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+		"TP88", /* GPIO_81 */
+		"TP89", /* GPIO_82 */
+		"TP90", /* GPIO_83 */
+		"TP91", /* GPIO_84 */
+		"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+		"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+		"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+		"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+		"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+		"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+		"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+		"NC", /* GPIO_92 */
+		"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+		"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+		"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+		"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+		"NC", /* GPIO_97 */
+		"CAM1_STANDBY_N", /* GPIO_98 */
+		"NC", /* GPIO_99 */
+		"NC", /* GPIO_100 */
+		"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+		"BOOT_CONFIG1", /* GPIO_102 */
+		"USB_HUB_RESET", /* GPIO_103 */
+		"CAM1_RST_N", /* GPIO_104 */
+		"NC", /* GPIO_105 */
+		"NC", /* GPIO_106 */
+		"NC", /* GPIO_107 */
+		"NC", /* GPIO_108 */
+		"NC", /* GPIO_109 */
+		"NC", /* GPIO_110 */
+		"NC", /* GPIO_111 */
+		"NC", /* GPIO_112 */
+		"PMI8994_BUA", /* GPIO_113 */
+		"PCIE2_RST_N", /* GPIO_114 */
+		"PCIE2_CLKREQ_N", /* GPIO_115 */
+		"PCIE2_WAKE", /* GPIO_116 */
+		"SSC_IRQ_0", /* GPIO_117 */
+		"SSC_IRQ_1", /* GPIO_118 */
+		"SSC_IRQ_2", /* GPIO_119 */
+		"NC", /* GPIO_120 */
+		"GPIO121", /* GPIO_121, S HSEC pin 2 */
+		"NC", /* GPIO_122 */
+		"SSC_IRQ_6", /* GPIO_123 */
+		"SSC_IRQ_7", /* GPIO_124 */
+		"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+		"BOOT_CONFIG5", /* GPIO_126 */
+		"NC", /* GPIO_127 */
+		"NC", /* GPIO_128 */
+		"BOOT_CONFIG7", /* GPIO_129 */
+		"PCIE1_RST_N", /* GPIO_130 */
+		"PCIE1_CLKREQ_N", /* GPIO_131 */
+		"PCIE1_WAKE", /* GPIO_132 */
+		"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+		"NC", /* GPIO_134 */
+		"NC", /* GPIO_135 */
+		"BOOT_CONFIG8", /* GPIO_136 */
+		"NC", /* GPIO_137 */
+		"NC", /* GPIO_138 */
+		"GPS_SSBI2", /* GPIO_139 */
+		"GPS_SSBI1", /* GPIO_140 */
+		"NC", /* GPIO_141 */
+		"NC", /* GPIO_142 */
+		"NC", /* GPIO_143 */
+		"BOOT_CONFIG6", /* GPIO_144 */
+		"NC", /* GPIO_145 */
+		"NC", /* GPIO_146 */
+		"NC", /* GPIO_147 */
+		"NC", /* GPIO_148 */
+		"NC"; /* GPIO_149 */
+
+	sdc2_cd_on: sdc2-cd-on-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_cd_off: sdc2-cd-off-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	hdmi_hpd_active: hdmi-hpd-active-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <16>;
+	};
+
+	hdmi_hpd_suspend: hdmi-hpd-suspend-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	hdmi_ddc_active: hdmi-ddc-active-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	hdmi_ddc_suspend: hdmi-ddc-suspend-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie2 {
+	status = "okay";
+	perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"BL1_PWM",
+		"GPIO-F", /* BL0_PWM, LSEC pin 28 */
+		"BL1_EN",
+		"NC",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"DIVCLK1",
+		"DIVCLK2",
+		"DIVCLK3",
+		"DIVCLK4",
+		"BT_EN",
+		"PMIC_SLB",
+		"PMIC_BUA",
+		"USB_VBUS_DET";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
+
+	ls_exp_gpio_f: pm8994-gpio5-state {
+		pinconf {
+			pins = "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+
+	bt_en_gpios: bt-en-pios-state {
+		pinconf {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	wlan_en_gpios: wlan-en-gpios-state {
+		pinconf {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	audio_mclk: clk-div1-state {
+		pinconf {
+			pins = "gpio15";
+			function = "func1";
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+
+	volume_up_gpio: pm8996-gpio2-state {
+		pinconf {
+			pins = "gpio2";
+			function = "normal";
+			input-enable;
+			drive-push-pull;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pinconf {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+
+			bias-disable;
+			power-source = <PM8994_GPIO_S4>;
+		};
+	};
+
+	usb3_vbus_det_gpio: pm8996-gpio22-state {
+		pinconf {
+			pins = "gpio22";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"VDDPX_BIAS",
+		"WIFI_LED",
+		"NC",
+		"BT_LED",
+		"PM_MPP05",
+		"PM_MPP06",
+		"PM_MPP07",
+		"NC";
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+	vdd_s11-supply = <&vph_pwr>;
+
+	s9 {
+		qcom,saw-slave;
+	};
+	s10 {
+		qcom,saw-slave;
+	};
+	s11 {
+		qcom,saw-leader;
+		regulator-name = "VDD_APCC";
+		regulator-always-on;
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",
+		"SPKR_AMP_EN1",
+		"SPKR_AMP_EN2",
+		"TP61",
+		"NC",
+		"USB2_VBUS_DET",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+
+	usb2_vbus_det_gpio: pmi8996-gpio6-state {
+		pinconf {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+};
+
+&pmi8994_lpg {
+	qcom,power-source = <1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmi8994_mpp2_userled4>;
+
+	qcom,dtest = <0 0>,
+		     <0 0>,
+		     <0 0>,
+		     <4 1>;
+
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <1>;
+
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+
+	led@2 {
+		reg = <2>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <0>;
+	};
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <2>;
+	};
+
+	led@4 {
+		reg = <4>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <3>;
+	};
+};
+
+&pmi8994_mpps {
+	pmi8994_mpp2_userled4: mpp2-userled4-state {
+		pins = "mpp2";
+		function = "sink";
+
+		output-low;
+		qcom,dtest = <4>;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+
+	vdd_gfx: s2 {
+		regulator-name = "VDD_GFX";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&vreg_s1b_1p025>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		/**
+		 * 1.8v required on LS expansion
+		 * for mezzanine boards
+		 */
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		vph_pwr_bbyp: boost-bypass {
+			regulator-name = "vph_pwr_bbyp";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_s1b_1p025: s1 {
+			regulator-name = "vreg_s1b_1p025";
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+	};
+};
+
+&sdhc2 {
+	/* External SD card */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+	};
+
+	dai@1 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+	};
+
+	dai@2 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+	};
+};
+
+&slim_msm {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&div1_mclk>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "DB820c";
+	audio-routing = "RX_BIAS", "MCLK";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI";
+		cpu {
+			sound-dai = <&q6afedai HDMI_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&mdss_hdmi 0>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vdd-hba-supply = <&vreg_l25a_1p2>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&usb2 {
+	status = "okay";
+	extcon = <&usb2_id>;
+};
+
+&usb2_dwc3 {
+	extcon = <&usb2_id>;
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&usb3 {
+	status = "okay";
+	extcon = <&usb3_id>;
+};
+
+&usb3_dwc3 {
+	extcon = <&usb3_id>;
+	dr_mode = "otg";
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&venus {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096sg-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096sg-db820c.dts
new file mode 100644
index 000000000000..f3ab5a7c6e53
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096sg-db820c.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include "msm8996pro.dtsi"
+#include "apq8096-db820c.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. DB820c";
+	compatible = "arrow,apq8096sg-db820c", "arrow,apq8096-db820c",
+		"qcom,apq8096-sbc", "qcom,apq8096sg", "qcom,apq8096";
+};