arm64: dts: qcom: lemans-evk: Describe the PCIe M.2 Key E connector

The lemans EVK has the PCIe M.2 Mechanical Key E connector to connect
wireless connectivity cards over PCIe and UART interfaces. Hence,
describe the connector node and link it with the PCIe 0 Root Port and
UART17 nodes through graph port/endpoint.

The M.2 Key E connector is powered by a 3.3V fixed regulator
(vreg_wcn_3p3) which is sourced from the board's 12V DC input rail
(vreg_dcin_12v). Both regulators are always-on and are required by the
pcie-m2-e-connector binding.

Also add the serial1 = &uart17 alias, which is required for the
Bluetooth serdev device to be enumerated on the UART17 interface.

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Wei Deng <wei.deng@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260622-v3-lemans-split-v3-2-d26bb22594e3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

1 files changed, 75 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index 0b01be78a737..0c53640c42a6 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -21,6 +21,7 @@
 		ethernet0 = &ethernet0;
 		mmc1 = &sdhc;
 		serial0 = &uart10;
+		serial1 = &uart17;
 		serial2 = &uart0;
 	};
 
@@ -119,6 +120,38 @@
 		};
 	};
 
+	connector-3 {
+		compatible = "pcie-m2-e-connector";
+		vpcie3v3-supply = <&vreg_wcn_3p3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				m2_e_pcie_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&pcieport0_ep>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				m2_e_uart_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&uart17_ep>;
+				};
+			};
+		};
+	};
+
 	edp0-connector {
 		compatible = "dp-connector";
 		label = "EDP0";
@@ -218,6 +251,17 @@
 		regulator-max-microvolt = <2950000>;
 	};
 
+	vreg_dcin_12v: regulator-dcin-12v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_DCIN_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vreg_sdc: regulator-vreg-sdc {
 		compatible = "regulator-gpio";
 
@@ -231,6 +275,19 @@
 
 		startup-delay-us = <100>;
 	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vreg_dcin_12v>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &apps_rsc {
@@ -815,6 +872,14 @@
 	status = "okay";
 };
 
+&pcieport0 {
+	port {
+		pcieport0_ep: endpoint {
+			remote-endpoint = <&m2_e_pcie_ep>;
+		};
+	};
+};
+
 &pmm8654au_0_pon_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -1057,6 +1122,16 @@
 	status = "okay";
 };
 
+&uart17 {
+	status = "okay";
+
+	port {
+		uart17_ep: endpoint {
+			remote-endpoint = <&m2_e_uart_ep>;
+		};
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l8a>;