diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2026-04-03 00:08:34 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2026-04-03 00:08:34 +0200 |
| commit | 8366b60cbea2fbf4263e68da39dc848ea1793568 (patch) | |
| tree | 210426eb61f36fc82df68793db33113b68dd66ba | |
| parent | 197da801f1f5f91e15d282a919288348a11fedb0 (diff) | |
| parent | b683730e27ba4f91986c4c92f5cb7297f1e01a6d (diff) | |
Merge tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v7.1
Introduce the Eliza, Glymur, Mahua, and IPQ5210 Qualcomm SoCs.
Introduce the Redmi 4A, Redmi Go, Arduino Monza (VENTUNO Q), Redmi Note
8T, Purwa EVK, ECS Liva QCS710, additional variants of the DB820c,
Ayaneo Pocket S2, Thundercomm AI Mini PC G1, Samsung Galaxy Core Prime
LTE Verizon Wireless, Wiko Pulp 4G, the Purwa-variant of ASUS Vivobook
S15, the Eliza MTP, and the Glymur and Mahua CRDs.
Introduce UFS support and flatten the DWC3 node on Hamoa. Enable UFS,
SDC, DisplayPort audio playback, and an EL2 overlay for the Hamoa IoT
EVK. Enable DisplayPort audio on the Hamoa CRD and add HDMI support on
the ASUS Zenbook A14. Reduce the duplication of thermal sensors across
Purwa and Hamoa.
Add the QPIC SPI NAND controller on IPQ5332 and IPQ9574. Describe and
enable the eMMC controller on IPQ9574.
Add display, audio/compute remoteprocs, QUP devices, thermal sensors,
display, and CoreSight on the Kaanapali platform. Enable audio, compute
display, PMIC, Bluetooth, and WiFi on the MTP. Describe PMIC, audio and
compute remoteprocs on QRD.
Add role-switching support for the tertiary USB controller on Lemans.
Enable the tertiary USB controller and the GPIO expander on the Lemans
EVK, and add an overlay for the IFP Mezzanine.
Add UFS, camera control interface, audio GPR, and FastRPC support on
Milos. Enable UFS, camera EEPROMs, and hall effect sensor on the
Fairphone FP6.
Add camera control interface and fix a variety of things on the Monaco
platform, add missing FastRPC compute banks. Add eMMC support, describe
the DisplayPort bridge and GPIO expander on the Monaco EVK. Add overlay
for EVK camera and the IFP mezzanine.
Add touchscreen to the Xiaomi Redmi 4A, 5A, and Go, and fix the board-id
on the 4A.
Add the ambient light and proximity sensor on the Asus ZenFone 2
Laser/Selfie.
On Kodiak-based boards, enable the ethernet and USB Type-A ports on the
Rb3Gen2, correct the LT9611 routing on the RubikPi3, add Bluetooth on
the IDP, and add front camera support on the Fairphone FP5.
Introduce an overlay for the Rb3Gen2 Industrial Mezzanine.
Describe DSI on the Monaco SoC and enable Bluetooth, WiFi and DSI/DP
bridge on the Ride board.
Describe the WiFi/BT combo chip properly on the QRB2210 RB1 and QRB4210.
The describe the DSI/DP bringde on the Arduino UnoQ.
01022af2d218 arm64: dts: qcom: sc7280-chrome-common: disable Venus
Introduce DSI display support on SC8280XP.
Add LLCC on SDM670 and another SPI controller on SDM630.
Properly describe the WiFi/BT chip on a variety of SDM845-based
devices. Introduce the "alert slider" on the OnePlus 6 and OnePlus 6T
devices.
Introduce the PRNG, describe the debug UART, and add the MDSS core reset
on SM6125. Enable the debug UART and fix various issues on the Xiaomi
Redmi Note 8. Describe the touchscreen on the Xiaomi Mi A3.
Properly describe the WiFi/BT combo chip in SM8150 HDK.
Improve the EAS properties on SM8550, in addition to various other
fixes. Introduce a new overlay for the HDK display card.
Introduce various smaller fixes across SM8450 and SM8650.
Add display support on SM8750 and enable DSI and DisplayPort on the MTP.
Also add tsens and thermal-zones.
Add ETR devices, flatten the USB controller node, and mark USB
controllers as wakeup-capable devices, on Talos.
Properly describe the IPA IMEM slice on a variety of platforms.
Drop redundant non-controllable regulator definitions from a variety of
boards.
Drop redundant VSYNC pin state definition from various platforms.
* tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (254 commits)
arm64: dts: qcom: sm8250: Add missing CPU7 3.09GHz OPP
arm64: dts: qcom: sm8550-hdk: add support for the Display Card overlay
arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree
dt-bindings: qcom: Document samsung,coreprimeltevzw
arm64: dts: qcom: msm8916-samsung-fortuna: Move SM5504 from rossa and refactor MUIC
arm64: dts: qcom: sdm670: add llcc
arm64: dts: qcom: qcm6490-fairphone-fp5: Add front camera support
arm64: dts: qcom: qcm6490-fairphone-fp5: Sort pinctrl nodes by pins
arm64: dts: qcom: milos-fairphone-fp6: Add camera EEPROMs on CCI busses
arm64: dts: qcom: milos: Add CCI busses
arm64: dts: qcom: purwa-iot-evk: Enable UFS
arm64: dts: qcom: eliza: Add thermal sensors
arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP
arm64: dts: qcom: sdm845-oneplus: Describe Wi-Fi/BT properly
arm64: dts: qcom: sdm845-google: Describe Wi-Fi/BT properly
arm64: dts: qcom: drop redundant zap-shader memory-region
arm64: dts: qcom: fix remaining gpu_zap_shader labels
arm64: dts: qcom: msm8996: fix indentation in sdhc2 node
arm64: dts: qcom: monaco-evk: enable UART6 for robot expansion board
arm64: dts: qcom: lemans-evk: enable UART0 for robot expansion board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
178 files changed, 37150 insertions, 4984 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 736b7ab1bd0a..07f3c6a52554 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -218,6 +218,13 @@ properties: - qcom,kryo685 - qcom,kryo780 - qcom,oryon + - qcom,oryon-1-1 + - qcom,oryon-1-2 + - qcom,oryon-1-3 + - qcom,oryon-1-4 + - qcom,oryon-2-1 + - qcom,oryon-2-2 + - qcom,oryon-2-3 - qcom,scorpion - samsung,mongoose-m2 - samsung,mongoose-m3 diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index d48c625d3fc4..63eff1e9ecad 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -63,6 +63,21 @@ properties: - items: - enum: + - qcom,eliza-mtp + - const: qcom,eliza + + - items: + - enum: + - qcom,glymur-crd + - const: qcom,glymur + + - items: + - enum: + - qcom,mahua-crd + - const: qcom,mahua + + - items: + - enum: - fairphone,fp6 - const: qcom,milos @@ -171,6 +186,7 @@ properties: - qcom,msm8916-mtp - samsung,a3u-eur - samsung,a5u-eur + - samsung,coreprimeltevzw - samsung,e5 - samsung,e7 - samsung,fortuna3g @@ -186,6 +202,7 @@ properties: - samsung,serranove - thwc,uf896 - thwc,ufi001c + - wiko,chuppito - wingtech,wt86518 - wingtech,wt86528 - wingtech,wt88047 @@ -195,6 +212,8 @@ properties: - items: - enum: - xiaomi,riva + - xiaomi,rolex + - xiaomi,tiare - const: qcom,msm8917 - items: @@ -244,6 +263,13 @@ properties: - const: qcom,apq8096 - items: + - const: arrow,apq8096sg-db820c + - const: arrow,apq8096-db820c + - const: qcom,apq8096-sbc + - const: qcom,apq8096sg + - const: qcom,apq8096 + + - items: - enum: - oneplus,oneplus3 - oneplus,oneplus3t @@ -299,6 +325,11 @@ properties: - items: - enum: + - qcom,ipq5210-rdp504 + - const: qcom,ipq5210 + + - items: + - enum: - qcom,ipq5332-ap-mi01.2 - qcom,ipq5332-ap-mi01.3 - qcom,ipq5332-ap-mi01.6 @@ -326,8 +357,10 @@ properties: - items: - enum: - qcom,ipq9574-ap-al02-c2 + - qcom,ipq9574-ap-al02-c2-emmc - qcom,ipq9574-ap-al02-c6 - qcom,ipq9574-ap-al02-c7 + - qcom,ipq9574-ap-al02-c7-emmc - qcom,ipq9574-ap-al02-c8 - qcom,ipq9574-ap-al02-c9 - const: qcom,ipq9574 @@ -360,6 +393,7 @@ properties: - qcom,qcs6490-rb3gen2 - radxa,dragon-q6a - shift,otter + - thundercomm,minipc-g1iot - thundercomm,rubikpi3 - const: qcom,qcm6490 @@ -385,6 +419,7 @@ properties: - items: - enum: - acer,aspire1 + - ecs,liva-qc710 - qcom,sc7180-idp - const: qcom,sc7180 @@ -876,6 +911,7 @@ properties: - items: - enum: + - arduino,monza - qcom,monaco-evk - qcom,qcs8300-ride - const: qcom,qcs8300 @@ -966,6 +1002,7 @@ properties: - sony,pdx201 - xiaomi,ginkgo - xiaomi,laurel-sprout + - xiaomi,willow - const: qcom,sm6125 - items: @@ -1057,6 +1094,7 @@ properties: - items: - enum: + - ayaneo,pocket-s2 - qcom,sm8650-hdk - qcom,sm8650-mtp - qcom,sm8650-qrd @@ -1124,6 +1162,12 @@ properties: - items: - enum: + - qcom,purwa-iot-evk + - const: qcom,purwa-iot-som + - const: qcom,x1p42100 + + - items: + - enum: - asus,zenbook-a14-ux3407qa-lcd - asus,zenbook-a14-ux3407qa-oled - const: asus,zenbook-a14-ux3407qa @@ -1131,6 +1175,7 @@ properties: - items: - enum: + - asus,vivobook-s15-x1p4 - hp,omnibook-x14-fe1 - lenovo,thinkbook-16 - qcom,x1p42100-crd diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5210-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5210-gcc.yaml new file mode 100644 index 000000000000..f1cc3fc19085 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,ipq5210-gcc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,ipq5210-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on IPQ5210 + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on IPQ5210 + + See also: + include/dt-bindings/clock/qcom,ipq5210-gcc.h + include/dt-bindings/reset/qcom,ipq5210-gcc.h + +properties: + compatible: + const: qcom,ipq5210-gcc + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PCIE30 PHY0 pipe clock source + - description: PCIE30 PHY1 pipe clock source + - description: USB3 PHY pipe clock source + - description: NSS common clock source + + '#power-domain-cells': false + + '#interconnect-cells': + const: 1 + +required: + - compatible + - clocks + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + clock-controller@1800000 { + compatible = "qcom,ipq5210-gcc"; + reg = <0x01800000 0x40000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&pcie30_phy0_pipe_clk>, + <&pcie30_phy1_pipe_clk>, + <&usb3phy_0_cc_pipe_clk>, + <&nss_cmn_clk>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,milos-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,milos-gcc.yaml index cf244c155f9a..60f1c8ca2c13 100644 --- a/Documentation/devicetree/bindings/clock/qcom,milos-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,milos-gcc.yaml @@ -8,16 +8,21 @@ title: Qualcomm Global Clock & Reset Controller on Milos maintainers: - Luca Weiss <luca.weiss@fairphone.com> + - Taniya Das <taniya.das@oss.qualcomm.com> description: | Qualcomm global clock control module provides the clocks, resets and power domains on Milos. - See also: include/dt-bindings/clock/qcom,milos-gcc.h + See also: + - include/dt-bindings/clock/qcom,eliza-gcc.h + - include/dt-bindings/clock/qcom,milos-gcc.h properties: compatible: - const: qcom,milos-gcc + enum: + - qcom,eliza-gcc + - qcom,milos-gcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index 3f5f1336262e..9690169baa46 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -17,6 +17,7 @@ description: | properties: compatible: enum: + - qcom,eliza-rpmh-clk - qcom,glymur-rpmh-clk - qcom,kaanapali-rpmh-clk - qcom,milos-rpmh-clk diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml index 784fef830681..ae9aef0e54e8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml @@ -15,6 +15,7 @@ description: | power domains on SM8550 See also: + - include/dt-bindings/clock/qcom,eliza-tcsr.h - include/dt-bindings/clock/qcom,glymur-tcsr.h - include/dt-bindings/clock/qcom,sm8550-tcsr.h - include/dt-bindings/clock/qcom,sm8650-tcsr.h @@ -24,6 +25,7 @@ properties: compatible: items: - enum: + - qcom,eliza-tcsr - qcom,glymur-tcsr - qcom,kaanapali-tcsr - qcom,milos-tcsr diff --git a/Documentation/devicetree/bindings/interconnect/qcom,eliza-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,eliza-rpmh.yaml new file mode 100644 index 000000000000..9a926a97e7bf --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,eliza-rpmh.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,eliza-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on Eliza SoC + +maintainers: + - Odelu Kukatla <odelu.kukatla@oss.qualcomm.com> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + + See also: include/dt-bindings/interconnect/qcom,eliza-rpmh.h + +properties: + compatible: + enum: + - qcom,eliza-aggre1-noc + - qcom,eliza-aggre2-noc + - qcom,eliza-clk-virt + - qcom,eliza-cnoc-cfg + - qcom,eliza-cnoc-main + - qcom,eliza-gem-noc + - qcom,eliza-lpass-ag-noc + - qcom,eliza-lpass-lpiaon-noc + - qcom,eliza-lpass-lpicx-noc + - qcom,eliza-mc-virt + - qcom,eliza-mmss-noc + - qcom,eliza-nsp-noc + - qcom,eliza-pcie-anoc + - qcom,eliza-system-noc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,eliza-clk-virt + - qcom,eliza-mc-virt + then: + properties: + reg: false + else: + required: + - reg + + - if: + properties: + compatible: + contains: + enum: + - qcom,eliza-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + - description: aggre USB3 PRIM AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,eliza-aggre2-noc + then: + properties: + clocks: + items: + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,eliza-pcie-anoc + then: + properties: + clocks: + items: + - description: aggre-NOC PCIe AXI clock + - description: cfg-NOC PCIe a-NOC AHB clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,eliza-aggre1-noc + - qcom,eliza-aggre2-noc + - qcom,eliza-pcie-anoc + then: + required: + - clocks + else: + properties: + clocks: false + +unevaluatedProperties: false + +examples: + - | + gem_noc: interconnect@24100000 { + compatible = "qcom,eliza-gem-noc"; + reg = <0x24100000 0x163080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-2 { + compatible = "qcom,eliza-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,eliza-aggre1-noc"; + reg = <0x16e0000 0x16400>; + #interconnect-cells = <2>; + clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml index 4b9b98fbe8f2..6182599eb3c1 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml @@ -28,6 +28,7 @@ properties: - const: qcom,osm-l3 - items: - enum: + - qcom,eliza-epss-l3 - qcom,sa8775p-epss-l3 - qcom,sc7280-epss-l3 - qcom,sc8280xp-epss-l3 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 0317fdfd6bc3..44d2c0898365 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -221,6 +221,8 @@ patternProperties: description: Axiado Corporation "^axis,.*": description: Axis Communications AB + "^ayaneo,.*": + description: Anyun Intelligent Technology (Hong Kong) Co., Ltd "^azoteq,.*": description: Azoteq (Pty) Ltd "^azw,.*": @@ -1827,6 +1829,8 @@ patternProperties: description: Wi2Wi, Inc. "^widora,.*": description: Beijing Widora Technology Co., Ltd. + "^wiko,.*": + description: Wiko SAS "^wiligear,.*": description: Wiligear, Ltd. "^willsemi,.*": diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f80b5d9cf1e8..91b7236a2190 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -12,10 +12,18 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-schneider-hmibsc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8096sg-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += eliza-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += glymur-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk.dtb + +hamoa-iot-evk-el2-dtbs := hamoa-iot-evk.dtb x1-el2.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp432-c2.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5018-tplink-archer-ax55-v1.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5210-rdp504.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb @@ -25,8 +33,8 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb -dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb -dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb ipq9574-rdp418-emmc.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb ipq9574-rdp433-emmc.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb @@ -43,8 +51,21 @@ dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera.dtb lemans-evk-el2-dtbs := lemans-evk.dtb lemans-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-el2.dtb +lemans-evk-ifp-mezzanine-dtbs := lemans-evk.dtb lemans-evk-ifp-mezzanine.dtbo +dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-ifp-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += mahua-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += milos-fairphone-fp6.dtb +dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb + +monaco-evk-camera-imx577-dtbs := monaco-evk.dtb monaco-evk-camera-imx577.dtbo +dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-camera-imx577.dtb + +monaco-evk-el2-dtbs := monaco-evk.dtb monaco-el2.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-el2.dtb +monaco-evk-ifp-mezzanine-dtbs := monaco-evk.dtb monaco-evk-ifp-mezzanine.dtbo +dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-ifp-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb @@ -61,6 +82,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-surnia.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-coreprimeltevzw.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gprimeltecan.dtb @@ -75,11 +97,14 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-rossa.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-wiko-chuppito.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-rolex.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-tiare.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8937-xiaomi-land.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-asus-z00t.dtb @@ -130,6 +155,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb +dtb-$(CONFIG_ARCH_QCOM) += purwa-iot-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-particle-tachyon.dtb @@ -145,8 +171,13 @@ qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2 dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-industrial-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-thundercomm-minipc-g1iot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-thundercomm-rubikpi3.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride.dtb + +qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb @@ -178,6 +209,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride-r3.dtb sc7180-acer-aspire1-el2-dtbs := sc7180-acer-aspire1.dtb sc7180-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += sc7180-acer-aspire1.dtb sc7180-acer-aspire1-el2.dtb +sc7180-ecs-liva-qc710-el2-dtbs := sc7180-ecs-liva-qc710.dtb sc7180-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += sc7180-ecs-liva-qc710.dtb sc7180-ecs-liva-qc710-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb @@ -294,8 +327,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sm4450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb -dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-ginkgo.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-ginkgo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-willow.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-curtana.dtb @@ -327,14 +361,19 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-samsung-r0q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb +sm8550-hdk-display-card-dtbs := sm8550-hdk.dtb sm8550-hdk-display-card.dtbo +sm8550-hdk-display-card-rear-camera-card-dtbs := sm8550-hdk.dtb sm8550-hdk-display-card.dtbo sm8550-hdk-rear-camera-card.dtbo sm8550-hdk-rear-camera-card-dtbs := sm8550-hdk.dtb sm8550-hdk-rear-camera-card.dtbo +dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk-display-card-rear-camera-card.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk-display-card.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk-rear-camera-card.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-samsung-q5q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-ayaneo-pocket-s2.dtb sm8650-hdk-display-card-dtbs := sm8650-hdk.dtb sm8650-hdk-display-card.dtbo sm8650-hdk-display-card-rear-camera-card-dtbs := sm8650-hdk.dtb sm8650-hdk-display-card.dtbo sm8650-hdk-rear-camera-card.dtbo @@ -374,12 +413,16 @@ x1e80100-lenovo-yoga-slim7x-el2-dtbs := x1e80100-lenovo-yoga-slim7x.dtb x1-el2.d dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb x1e80100-lenovo-yoga-slim7x-el2.dtb x1e80100-medion-sprchrgd-14-s1-el2-dtbs := x1e80100-medion-sprchrgd-14-s1.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-medion-sprchrgd-14-s1.dtb x1e80100-medion-sprchrgd-14-s1-el2.dtb +x1e80100-microsoft-denali-oled-el2-dtbs := x1e80100-microsoft-denali-oled.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-denali-oled.dtb x1e80100-microsoft-denali-oled-el2.dtb x1e80100-microsoft-romulus13-el2-dtbs := x1e80100-microsoft-romulus13.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb x1e80100-microsoft-romulus13-el2.dtb x1e80100-microsoft-romulus15-el2-dtbs := x1e80100-microsoft-romulus15.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb x1e80100-qcp-el2-dtbs := x1e80100-qcp.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb x1e80100-qcp-el2.dtb +x1p42100-asus-vivobook-s15-el2-dtbs := x1p42100-asus-vivobook-s15.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-vivobook-s15.dtb x1p42100-asus-vivobook-s15-el2.dtb x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb x1p42100-asus-zenbook-a14-lcd-el2-dtbs := x1p42100-asus-zenbook-a14-lcd.dtb x1-el2.dtbo diff --git a/arch/arm64/boot/dts/qcom/agatti.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi index 76b93b7bd50f..6ee71c3895a9 100644 --- a/arch/arm64/boot/dts/qcom/agatti.dtsi +++ b/arch/arm64/boot/dts/qcom/agatti.dtsi @@ -2839,9 +2839,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 9fa70ff6887b..47b4568e4039 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -6,1133 +6,9 @@ /dts-v1/; #include "msm8996.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/sound/qcom,q6afe.h> -#include <dt-bindings/sound/qcom,q6asm.h> -#include <dt-bindings/sound/qcom,wcd9335.h> - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * P HSEC = Primary High Speed External Connector - * S HSEC = Secondary High Speed External Connector - * J14 = Camera Connector - * TP = Test Points - * - * Line names are taken from the schematic "DragonBoard 820c", - * drawing no: LM25-P2751-1 - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ +#include "apq8096-db820c.dtsi" / { model = "Qualcomm Technologies, Inc. DB820c"; compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; - - aliases { - serial0 = &blsp2_uart2; - serial1 = &blsp2_uart3; - serial2 = &blsp1_uart2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c1; - spi0 = &blsp1_spi1; - spi1 = &blsp2_spi6; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - div1_mclk: divclk1 { - compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk>; - pinctrl-names = "default"; - clocks = <&rpmcc RPM_SMD_DIV_CLK1>; - #clock-cells = <0>; - enable-gpios = <&pm8994_gpios 15 0>; - }; - - divclk4: divclk4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "divclk4"; - - pinctrl-names = "default"; - pinctrl-0 = <&divclk4_pin_a>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&volume_up_gpio>; - - button { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; - }; - }; - - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; - }; - - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm8994_gpios 8 0>; - - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; -}; - -&blsp1_i2c3 { - /* On Low speed expansion: LS-I2C0 */ - status = "okay"; -}; - -&blsp1_spi1 { - /* On Low speed expansion */ - status = "okay"; -}; - -&blsp1_uart2 { - label = "BT-UART"; - status = "okay"; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - - clocks = <&divclk4>; - }; -}; - -&adsp_pil { - status = "okay"; - firmware-name = "qcom/apq8096/adsp.mbn"; -}; - -&blsp2_i2c1 { - /* On High speed expansion: HS-I2C2 */ - status = "okay"; -}; - -&blsp2_i2c1 { - /* On Low speed expansion: LS-I2C1 */ - status = "okay"; -}; - -&blsp2_spi6 { - /* On High speed expansion */ - status = "okay"; -}; - -&blsp2_uart2 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_2pins_default>; - pinctrl-1 = <&blsp2_uart2_2pins_sleep>; -}; - -&blsp2_uart3 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart3_4pins_default>; - pinctrl-1 = <&blsp2_uart3_4pins_sleep>; -}; - -&camss { - vdda-supply = <&vreg_l2a_1p25>; -}; - -&gpu { - status = "okay"; -}; - -&gpu_zap_shader { - firmware-name = "qcom/apq8096/a530_zap.mbn"; -}; - -&hsusb_phy1 { - status = "okay"; - - vdd-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&hsusb_phy2 { - status = "okay"; - - vdd-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&mdp { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mdss_hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&mdss_hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - -&mmcc { - vdd-gfx-supply = <&vdd_gfx>; -}; - -&mss_pil { - status = "okay"; - pll-supply = <&vreg_l12a_1p8>; - firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn"; -}; - -&pm8994_resin { - status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; -}; - -&tlmm { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - - sdc2_cd_on: sdc2-cd-on-state { - pins = "gpio38"; - function = "gpio"; - bias-pull-up; - drive-strength = <16>; - }; - - sdc2_cd_off: sdc2-cd-off-state { - pins = "gpio38"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; - - hdmi_hpd_active: hdmi-hpd-active-state { - pins = "gpio34"; - function = "hdmi_hot"; - bias-pull-down; - drive-strength = <16>; - }; - - hdmi_hpd_suspend: hdmi-hpd-suspend-state { - pins = "gpio34"; - function = "hdmi_hot"; - bias-pull-down; - drive-strength = <2>; - }; - - hdmi_ddc_active: hdmi-ddc-active-state { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - drive-strength = <2>; - bias-pull-up; - }; - - hdmi_ddc_suspend: hdmi-ddc-suspend-state { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - drive-strength = <2>; - bias-pull-down; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie1 { - status = "okay"; - perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie2 { - status = "okay"; - perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&pm8994_gpios { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - - ls_exp_gpio_f: pm8994-gpio5-state { - pinconf { - pins = "gpio5"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; /* 1.8V */ - }; - }; - - bt_en_gpios: bt-en-pios-state { - pinconf { - pins = "gpio19"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; /* 1.8V */ - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - wlan_en_gpios: wlan-en-gpios-state { - pinconf { - pins = "gpio8"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; /* 1.8V */ - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - audio_mclk: clk-div1-state { - pinconf { - pins = "gpio15"; - function = "func1"; - power-source = <PM8994_GPIO_S4>; /* 1.8V */ - }; - }; - - volume_up_gpio: pm8996-gpio2-state { - pinconf { - pins = "gpio2"; - function = "normal"; - input-enable; - drive-push-pull; - bias-pull-up; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; /* 1.8V */ - }; - }; - - divclk4_pin_a: divclk4-state { - pinconf { - pins = "gpio18"; - function = PMIC_GPIO_FUNC_FUNC2; - - bias-disable; - power-source = <PM8994_GPIO_S4>; - }; - }; - - usb3_vbus_det_gpio: pm8996-gpio22-state { - pinconf { - pins = "gpio22"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; /* 1.8V */ - }; - }; -}; - -&pm8994_mpps { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; -}; - -&pm8994_spmi_regulators { - qcom,saw-reg = <&saw3>; - vdd_s11-supply = <&vph_pwr>; - - s9 { - qcom,saw-slave; - }; - s10 { - qcom,saw-slave; - }; - s11 { - qcom,saw-leader; - regulator-name = "VDD_APCC"; - regulator-always-on; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&pmi8994_gpios { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - - usb2_vbus_det_gpio: pmi8996-gpio6-state { - pinconf { - pins = "gpio6"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; /* 1.8V */ - }; - }; -}; - -&pmi8994_lpg { - qcom,power-source = <1>; - - pinctrl-names = "default"; - pinctrl-0 = <&pmi8994_mpp2_userled4>; - - qcom,dtest = <0 0>, - <0 0>, - <0 0>, - <4 1>; - - status = "okay"; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <1>; - - linux,default-trigger = "heartbeat"; - default-state = "on"; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <0>; - }; - - led@3 { - reg = <3>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <2>; - }; - - led@4 { - reg = <4>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <3>; - }; -}; - -&pmi8994_mpps { - pmi8994_mpp2_userled4: mpp2-userled4-state { - pins = "mpp2"; - function = "sink"; - - output-low; - qcom,dtest = <4>; - }; -}; - -&pmi8994_spmi_regulators { - vdd_s2-supply = <&vph_pwr>; - - vdd_gfx: s2 { - regulator-name = "VDD_GFX"; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&rpm_requests { - regulators-0 { - compatible = "qcom,rpm-pm8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_l1-supply = <&vreg_s1b_1p025>; - vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; - vdd_l3_l11-supply = <&vreg_s3a_1p3>; - vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; - vdd_l5_l7-supply = <&vreg_s5a_2p15>; - vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; - vdd_l8_l16_l30-supply = <&vph_pwr>; - vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; - vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; - vdd_l14_l15-supply = <&vreg_s5a_2p15>; - vdd_l17_l29-supply = <&vph_pwr_bbyp>; - vdd_l20_l21-supply = <&vph_pwr_bbyp>; - vdd_l25-supply = <&vreg_s3a_1p3>; - vdd_lvs1_2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p3: s3 { - regulator-name = "vreg_s3a_1p3"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - vreg_s4a_1p8: s4 { - regulator-name = "vreg_s4a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - vreg_s5a_2p15: s5 { - regulator-name = "vreg_s5a_2p15"; - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - vreg_s7a_1p0: s7 { - regulator-name = "vreg_s7a_1p0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - vreg_l1a_1p0: l1 { - regulator-name = "vreg_l1a_1p0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l2a_1p25: l2 { - regulator-name = "vreg_l2a_1p25"; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - vreg_l3a_0p875: l3 { - regulator-name = "vreg_l3a_0p875"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - }; - vreg_l4a_1p225: l4 { - regulator-name = "vreg_l4a_1p225"; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - vreg_l6a_1p2: l6 { - regulator-name = "vreg_l6a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l8a_1p8: l8 { - regulator-name = "vreg_l8a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l9a_1p8: l9 { - regulator-name = "vreg_l9a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l10a_1p8: l10 { - regulator-name = "vreg_l10a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l11a_1p15: l11 { - regulator-name = "vreg_l11a_1p15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - vreg_l12a_1p8: l12 { - regulator-name = "vreg_l12a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-name = "vreg_l13a_2p95"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - vreg_l14a_1p8: l14 { - regulator-name = "vreg_l14a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l15a_1p8: l15 { - regulator-name = "vreg_l15a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-name = "vreg_l16a_2p7"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - vreg_l17a_2p8: l17 { - regulator-name = "vreg_l17a_2p8"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - vreg_l18a_2p85: l18 { - regulator-name = "vreg_l18a_2p85"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2900000>; - }; - vreg_l19a_2p8: l19 { - regulator-name = "vreg_l19a_2p8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - vreg_l20a_2p95: l20 { - regulator-name = "vreg_l20a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-name = "vreg_l21a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - vreg_l22a_3p0: l22 { - regulator-name = "vreg_l22a_3p0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - vreg_l23a_2p8: l23 { - regulator-name = "vreg_l23a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l24a_3p075: l24 { - regulator-name = "vreg_l24a_3p075"; - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - vreg_l25a_1p2: l25 { - regulator-name = "vreg_l25a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l26a_0p8: l27 { - regulator-name = "vreg_l26a_0p8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l28a_0p925: l28 { - regulator-name = "vreg_l28a_0p925"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-allow-set-load; - }; - vreg_l29a_2p8: l29 { - regulator-name = "vreg_l29a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l30a_1p8: l30 { - regulator-name = "vreg_l30a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l32a_1p8: l32 { - regulator-name = "vreg_l32a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-name = "vreg_lvs1a_1p8"; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-name = "vreg_lvs2a_1p8"; - }; - }; - - regulators-1 { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - vph_pwr_bbyp: boost-bypass { - regulator-name = "vph_pwr_bbyp"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vreg_s1b_1p025: s1 { - regulator-name = "vreg_s1b_1p025"; - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; - }; - }; -}; - -&sdhc2 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; - cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - status = "okay"; -}; - -&q6asmdai { - dai@0 { - reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - - dai@1 { - reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - - dai@2 { - reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; - }; -}; - -&slim_msm { - status = "okay"; - - slim@1 { - reg = <1>; - #address-cells = <2>; - #size-cells = <0>; - - tasha_ifd: tas-ifd@0,0 { - compatible = "slim217,1a0"; - reg = <0 0>; - }; - - wcd9335: codec@1,0 { - compatible = "slim217,1a0"; - reg = <1 0>; - - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr1", "intr2"; - interrupt-controller; - #interrupt-cells = <1>; - - pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; - pinctrl-names = "default"; - - reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; - slim-ifc-dev = <&tasha_ifd>; - - #sound-dai-cells = <1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; - }; - }; -}; - -&sound { - compatible = "qcom,apq8096-sndcard"; - model = "DB820c"; - audio-routing = "RX_BIAS", "MCLK"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - mm2-dai-link { - link-name = "MultiMedia2"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - }; - - mm3-dai-link { - link-name = "MultiMedia3"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; - }; - }; - - hdmi-dai-link { - link-name = "HDMI"; - cpu { - sound-dai = <&q6afedai HDMI_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&mdss_hdmi 0>; - }; - }; - - slim-dai-link { - link-name = "SLIM Playback"; - cpu { - sound-dai = <&q6afedai SLIMBUS_6_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 AIF4_PB>; - }; - }; - - slimcap-dai-link { - link-name = "SLIM Capture"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_TX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 AIF1_CAP>; - }; - }; -}; - -&ufsphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&ufshc { - status = "okay"; - - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l25a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - vdd-hba-supply = <&vreg_l25a_1p2>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; -}; - -&usb2 { - status = "okay"; - extcon = <&usb2_id>; -}; - -&usb2_dwc3 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; -}; - -&usb3 { - status = "okay"; - extcon = <&usb3_id>; -}; - -&usb3_dwc3 { - extcon = <&usb3_id>; - dr_mode = "otg"; -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&venus { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi new file mode 100644 index 000000000000..0c076852b494 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -0,0 +1,1133 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. + */ + + +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + +/ { + aliases { + serial0 = &blsp2_uart2; + serial1 = &blsp2_uart3; + serial2 = &blsp1_uart2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + button { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + /* On Low speed expansion: LS-I2C0 */ + status = "okay"; +}; + +&blsp1_spi1 { + /* On Low speed expansion */ + status = "okay"; +}; + +&blsp1_uart2 { + label = "BT-UART"; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + + clocks = <&divclk4>; + }; +}; + +&adsp_pil { + status = "okay"; + firmware-name = "qcom/apq8096/adsp.mbn"; +}; + +&blsp2_i2c1 { + /* On High speed expansion: HS-I2C2 */ + status = "okay"; +}; + +&blsp2_i2c1 { + /* On Low speed expansion: LS-I2C1 */ + status = "okay"; +}; + +&blsp2_spi6 { + /* On High speed expansion */ + status = "okay"; +}; + +&blsp2_uart2 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; +}; + +&blsp2_uart3 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart3_4pins_default>; + pinctrl-1 = <&blsp2_uart3_4pins_sleep>; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/apq8096/a530_zap.mbn"; +}; + +&hsusb_phy1 { + status = "okay"; + + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&hsusb_phy2 { + status = "okay"; + + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&mdss_hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&mss_pil { + status = "okay"; + pll-supply = <&vreg_l12a_1p8>; + firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn"; +}; + +&pm8994_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&tlmm { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + + sdc2_cd_on: sdc2-cd-on-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + + sdc2_cd_off: sdc2-cd-off-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + hdmi_hpd_active: hdmi-hpd-active-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <16>; + }; + + hdmi_hpd_suspend: hdmi-hpd-suspend-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <2>; + }; + + hdmi_ddc_active: hdmi-ddc-active-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-up; + }; + + hdmi_ddc_suspend: hdmi-ddc-suspend-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie1 { + status = "okay"; + perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie2 { + status = "okay"; + perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; + + ls_exp_gpio_f: pm8994-gpio5-state { + pinconf { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; /* 1.8V */ + }; + }; + + bt_en_gpios: bt-en-pios-state { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; /* 1.8V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + wlan_en_gpios: wlan-en-gpios-state { + pinconf { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; /* 1.8V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + audio_mclk: clk-div1-state { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = <PM8994_GPIO_S4>; /* 1.8V */ + }; + }; + + volume_up_gpio: pm8996-gpio2-state { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; /* 1.8V */ + }; + }; + + divclk4_pin_a: divclk4-state { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; + }; + + usb3_vbus_det_gpio: pm8996-gpio22-state { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; /* 1.8V */ + }; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + vdd_s11-supply = <&vph_pwr>; + + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + s11 { + qcom,saw-leader; + regulator-name = "VDD_APCC"; + regulator-always-on; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + + usb2_vbus_det_gpio: pmi8996-gpio6-state { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; /* 1.8V */ + }; + }; +}; + +&pmi8994_lpg { + qcom,power-source = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmi8994_mpp2_userled4>; + + qcom,dtest = <0 0>, + <0 0>, + <0 0>, + <4 1>; + + status = "okay"; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <1>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <2>; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + }; +}; + +&pmi8994_mpps { + pmi8994_mpp2_userled4: mpp2-userled4-state { + pins = "mpp2"; + function = "sink"; + + output-low; + qcom,dtest = <4>; + }; +}; + +&pmi8994_spmi_regulators { + vdd_s2-supply = <&vph_pwr>; + + vdd_gfx: s2 { + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + }; +}; + +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + + dai@1 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + + dai@2 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; +}; + +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "DB820c"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI"; + cpu { + sound-dai = <&q6afedai HDMI_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&mdss_hdmi 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF4_PB>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF1_CAP>; + }; + }; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l25a_1p2>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&usb2 { + status = "okay"; + extcon = <&usb2_id>; +}; + +&usb2_dwc3 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; + +&usb3 { + status = "okay"; + extcon = <&usb3_id>; +}; + +&usb3_dwc3 { + extcon = <&usb3_id>; + dr_mode = "otg"; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&venus { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096sg-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096sg-db820c.dts new file mode 100644 index 000000000000..f3ab5a7c6e53 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096sg-db820c.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include "msm8996pro.dtsi" +#include "apq8096-db820c.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. DB820c"; + compatible = "arrow,apq8096sg-db820c", "arrow,apq8096-db820c", + "qcom,apq8096-sbc", "qcom,apq8096sg", "qcom,apq8096"; +}; diff --git a/arch/arm64/boot/dts/qcom/eliza-mtp.dts b/arch/arm64/boot/dts/qcom/eliza-mtp.dts new file mode 100644 index 000000000000..90f629800cb0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/eliza-mtp.dts @@ -0,0 +1,407 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "eliza.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Eliza MTP"; + compatible = "qcom,eliza-mtp", "qcom,eliza"; + chassis-type = "handset"; + + aliases { + serial0 = &uart14; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7550-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3b>; + vdd-l2-l3-supply = <&vreg_s3b>; + vdd-l4-l5-supply = <&vreg_s2b>; + vdd-l6-supply = <&vreg_s2b>; + vdd-l7-supply = <&vreg_s1b>; + vdd-l8-supply = <&vreg_s1b>; + vdd-l9-l10-supply = <&vreg_s1b>; + vdd-l11-supply = <&vreg_s1b>; + vdd-l12-l14-supply = <&vreg_bob>; + vdd-l13-l16-supply = <&vreg_bob>; + vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-bob-supply = <&vph_pwr>; + + qcom,pmic-id = "b"; + + vreg_s1b: smps1 { + regulator-name = "vreg_s1b"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2b: smps2 { + regulator-name = "vreg_s2b"; + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <2744000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3b: smps3 { + regulator-name = "vreg_s3b"; + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <2744000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4b: smps4 { + regulator-name = "vreg_s4b"; + regulator-min-microvolt = <2156000>; + regulator-max-microvolt = <2400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b: ldo2 { + regulator-name = "vreg_l2b"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <866000>; + regulator-max-microvolt = <958000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b: ldo7 { + regulator-name = "vreg_l7b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b: ldo8 { + regulator-name = "vreg_l8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b: ldo9 { + regulator-name = "vreg_l9b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b: ldo10 { + regulator-name = "vreg_l10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b: ldo11 { + regulator-name = "vreg_l11b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b: ldo12 { + regulator-name = "vreg_l12b"; + /* Voltage range for UFS 3.x and above */ + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b: ldo13 { + regulator-name = "vreg_l13b"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b: ldo14 { + regulator-name = "vreg_l14b"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b: ldo15 { + regulator-name = "vreg_l15b"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b: ldo16 { + regulator-name = "vreg_l16b"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b: ldo17 { + regulator-name = "vreg_l17b"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b: ldo18 { + regulator-name = "vreg_l18b"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b: ldo19 { + regulator-name = "vreg_l19b"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20b: ldo20 { + regulator-name = "vreg_l20b"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21b: ldo21 { + regulator-name = "vreg_l21b"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22b: ldo22 { + regulator-name = "vreg_l22b"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23b: ldo23 { + regulator-name = "vreg_l23b"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s2b>; + + qcom,pmic-id = "d"; + + vreg_l1d: ldo1 { + regulator-name = "vreg_l1d"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s2b>; + vdd-l3-supply = <&vreg_s2b>; + + qcom,pmic-id = "g"; + + vreg_l1g: ldo1 { + regulator-name = "vreg_l1g"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g: ldo3 { + regulator-name = "vreg_l3g"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + }; + + regulators-3 { + compatible = "qcom,pmr735d-rpmh-regulators"; + + vdd-l1-l2-l5-supply = <&vreg_s3b>; + vdd-l3-l4-supply = <&vreg_s2b>; + vdd-l6-supply = <&vreg_s1b>; + vdd-l7-supply = <&vreg_s3b>; + + qcom,pmic-id = "k"; + + vreg_l1k: ldo1 { + regulator-name = "vreg_l1k"; + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2k: ldo2 { + regulator-name = "vreg_l2k"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <969000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3k: ldo3 { + regulator-name = "vreg_l3k"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4k: ldo4 { + regulator-name = "vreg_l4k"; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5k: ldo5 { + regulator-name = "vreg_l5k"; + regulator-min-microvolt = <866000>; + regulator-max-microvolt = <931000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6k: ldo6 { + regulator-name = "vreg_l6k"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7k: ldo7 { + regulator-name = "vreg_l7k"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <958000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <20 4>, /* NFC SPI */ + <111 2>, /* WCN UART1 */ + <118 1>; /* NFC Secure I/O */ +}; + +&uart14 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l12b>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1d>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l4b>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi new file mode 100644 index 000000000000..4a7a0ac40ce6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi @@ -0,0 +1,1885 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/clock/qcom,eliza-gcc.h> +#include <dt-bindings/clock/qcom,eliza-tcsr.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,eliza-rpmh.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom,rpmhpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0x0 0x0>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&cpu_pd0>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3>; + + l3: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0x0 0x100>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&cpu_pd1>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0x0 0x200>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&cpu_pd2>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_2>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + l2_2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3>; + }; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0x0 0x300>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&cpu_pd3>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_3>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + l2_3: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3>; + }; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0x0 0x400>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&cpu_pd4>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_4>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + l2_4: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3>; + }; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0x0 0x500>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&cpu_pd5>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_5>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + l2_5: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3>; + }; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0x0 0x600>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&cpu_pd6>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_6>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + l2_6: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3>; + }; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x3"; + reg = <0x0 0x700>; + + clocks = <&cpufreq_hw 2>; + + power-domains = <&cpu_pd7>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_7>; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <588>; + + qcom,freq-domain = <&cpufreq_hw 2>; + + l2_7: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + + core6 { + cpu = <&cpu6>; + }; + + core7 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + cluster0_c4: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <550>; + exit-latency-us = <750>; + min-residency-us = <6700>; + }; + + cluster1_c4: cpu-sleep-1 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <550>; + exit-latency-us = <1050>; + min-residency-us = <7951>; + }; + + cluster2_c4: cpu-sleep-2 { + compatible = "arm,idle-state"; + idle-state-name = "gold-plus-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <500>; + exit-latency-us = <1350>; + min-residency-us = <7480>; + }; + }; + + domain-idle-states { + cluster_sleep_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <750>; + exit-latency-us = <2350>; + min-residency-us = <9144>; + }; + + cluster_sleep_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b344>; + entry-latency-us = <2800>; + exit-latency-us = <4400>; + min-residency-us = <10150>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-eliza", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + qcom,dload-mode = <&tcsr 0x1a000>; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,eliza-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,eliza-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0xa0000000 0x0 0x0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster0_c4>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster0_c4>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster0_c4>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster1_c4>; + }; + + cpu_pd4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster1_c4>; + }; + + cpu_pd5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster1_c4>; + }; + + cpu_pd6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster1_c4>; + }; + + cpu_pd7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster2_c4>; + }; + + cluster_pd: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_sleep_0>, + <&cluster_sleep_1>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gunyah_hyp_mem: gunyah-hyp@80000000 { + reg = <0x0 0x80000000 0x0 0xe00000>; + no-map; + }; + + cpusys_vm_mem: cpusys-vm-mem@80e00000 { + reg = <0x0 0x80e00000 0x0 0x40000>; + no-map; + }; + + cpucp_mem: cpucp@81200000 { + reg = <0x0 0x81200000 0x0 0x200000>; + no-map; + }; + + xbl_dtlog_mem: xbl-dtlog@81a00000 { + reg = <0x0 0x81a00000 0x0 0x40000>; + no-map; + }; + + aop_image_mem: aop-image@81c00000 { + reg = <0x0 0x81c00000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + /* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */ + aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 { + reg = <0x0 0x81c80000 0x0 0x74000>; + no-map; + }; + + /* Secdata region can be reused by apps */ + smem_mem: smem@81d00000 { + compatible = "qcom,smem"; + reg = <0x0 0x81d00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + cpucp_scandump_mem: cpucp-scandump@82000000 { + reg = <0x0 0x82200000 0x0 0x180000>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi@82380000 { + reg = <0x0 0x82380000 0x0 0x20000>; + no-map; + }; + + soccp_sdi_mem: soccp-sdi@823a0000 { + reg = <0x0 0x823a0000 0x0 0x40000>; + no-map; + }; + + pmic_minii_dump_mem: pmic-minii-dump@823e0000 { + reg = <0x0 0x823e0000 0x0 0x80000>; + no-map; + }; + + pvmfw_mem: pvmfw@824a0000 { + reg = <0x0 0x824a0000 0x0 0x100000>; + no-map; + }; + + hyp_db_mem: hyp-db@825a0000 { + reg = <0x0 0x825a0000 0x0 0x60000>; + no-map; + }; + + global_sync_mem: global-sync@82600000 { + reg = <0x0 0x82600000 0x0 0x100000>; + no-map; + }; + + tz_stat_mem: tz-stat@82700000 { + reg = <0x0 0x82700000 0x0 0x100000>; + no-map; + }; + + qdss_mem: qdss@82800000 { + reg = <0x0 0x82800000 0x0 0x2000000>; + no-map; + }; + + dsm_partition_1_mem: dsm-partition-1@84a00000 { + reg = <0x0 0x84a00000 0x0 0x3700000>; + no-map; + }; + + mpss_mem: mpss@88100000 { + reg = <0x0 0x88100000 0x0 0xcd00000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@94e00000 { + reg = <0x0 0x94e00000 0x0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@94e80000 { + reg = <0x0 0x94e80000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@94e90000 { + reg = <0x0 0x94e90000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: gpu-micro-code@94e9a000 { + reg = <0x0 0x94e9a000 0x0 0x2000>; + no-map; + }; + + camera_mem: camera@94f00000 { + reg = <0x0 0x94f00000 0x0 0x800000>; + no-map; + }; + + camera_2_mem: camera-2@95700000 { + reg = <0x0 0x95700000 0x0 0x800000>; + no-map; + }; + + video_mem: video@95f00000 { + reg = <0x0 0x95f00000 0x0 0x800000>; + no-map; + }; + + soccp_mem: soccp@96700000 { + reg = <0x0 0x96700000 0x0 0x180000>; + no-map; + }; + + wpss_mem: wpss@97000000 { + reg = <0x0 0x97000000 0x0 0x1900000>; + no-map; + }; + + cdsp_mem: cdsp@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb@99d00000 { + reg = <0x0 0x99d00000 0x0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@99d80000 { + reg = <0x0 0x99d80000 0x0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi@99e00000 { + reg = <0x0 0x99e00000 0x0 0x2a00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@a6400000 { + reg = <0x0 0xa6400000 0x0 0xc00000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump@b8000000 { + reg = <0x0 0xb8000000 0x0 0x1c0000>; + no-map; + }; + + /* Merged tz_reserved, xbl_sc, and qtee regions */ + tz_merged_mem: tz-merged@d8000000 { + reg = <0x0 0xd8000000 0x0 0x600000>; + no-map; + }; + + trust_ui_vm_mem: trust-ui-vm@f3800000 { + reg = <0x0 0xf3800000 0x0 0x4400000>; + no-map; + }; + + oem_vm_mem: oem-vm@f7c00000 { + reg = <0x0 0xf7c00000 0x0 0x4c00000>; + no-map; + }; + + llcc_lpi_mem: llcc-lpi@ff800000 { + reg = <0x0 0xff800000 0x0 0x180000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>; + ranges = <0x0 0x0 0x0 0x0 0x10 0x0>; + + gcc: clock-controller@100000 { + compatible = "qcom,eliza-gcc"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + + clocks = <&bi_tcxo_div2>, + <&sleep_clk>, + <0>, + <0>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <0>; + + power-domains = <&rpmhpd RPMHPD_CX>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qupv3_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x423 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart14: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00894000 0x0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart14_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,eliza-cnoc-cfg"; + reg = <0x0 0x01600000 0x0 0x5200>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,eliza-cnoc-main"; + reg = <0x0 0x01500000 0x0 0x16080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,eliza-system-noc"; + reg = <0x0 0x01680000 0x0 0x40000>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,eliza-pcie-anoc"; + reg = <0x0 0x016c0000 0x0 0x11400>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + #interconnect-cells = <2>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,eliza-aggre1-noc"; + reg = <0x0 0x016e0000 0x0 0x16400>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,eliza-aggre2-noc"; + reg = <0x0 0x01700000 0x0 0x1f400>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_IPA_CLK>; + #interconnect-cells = <2>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,eliza-mmss-noc"; + reg = <0x0 0x01780000 0x0 0x7d800>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,eliza-qmp-ufs-phy", + "qcom,sm8650-qmp-ufs-phy"; + reg = <0x0 0x01d80000 0x0 0x2000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,eliza-ufshc", + "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>, + <0x0 0x01da0000 0x0 0x15000>; + reg-names = "std", + "mcq"; + + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_LN_BB_CLK3>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + + operating-points-v2 = <&ufs_opp_table>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0x0>; + dma-coherent; + + msi-parent = <&gic_its 0x60>; + + lanes-per-direction = <2>; + qcom,ice = <&ice>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-201500000 { + opp-hz = /bits/ 64 <201500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <201500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-403000000 { + opp-hz = /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + ice: crypto@1d88000 { + compatible = "qcom,eliza-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x0 0x01d88000 0x0 0x18000>; + + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fbf000 { + compatible = "qcom,eliza-tcsr", "syscon"; + reg = <0x0 0x01fbf000 0x0 0x21000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,eliza-lpass-ag-noc"; + reg = <0x0 0x07e40000 0x0 0xe080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,eliza-lpass-lpiaon-noc"; + reg = <0x0 0x07400000 0x0 0x19080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + lpass_lpicx_noc: interconnect@7420000 { + compatible = "qcom,eliza-lpass-lpicx-noc"; + reg = <0x0 0x07420000 0x0 0x44080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,eliza-pdc", "qcom,pdc"; + reg = <0x0 0x0b220000 0x0 0x40000>, + <0x0 0x174000f0 0x0 0x64>; + + qcom,pdc-ranges = <0 480 8>, <8 719 1>, <9 718 1>, + <10 230 1>, <11 724 1>, <12 716 1>, + <13 727 1>, <14 720 1>, <15 726 1>, + <16 721 1>, <17 262 1>, <18 70 1>, + <19 723 1>, <20 234 1>, <22 725 1>, + <23 231 1>, <24 504 5>, <30 510 8>, + <40 520 6>, <51 531 4>, <58 538 2>, + <61 541 5>, <66 92 1>, <67 547 13>, + <80 240 1>, <81 235 1>, <82 310 2>, + <84 248 1>, <85 241 1>, <86 238 2>, + <88 254 1>, <89 509 1>, <90 563 1>, + <91 259 2>, <93 201 1>, <94 246 1>, + <95 93 1>, <96 611 29>, <125 63 1>, + <126 366 2>, <128 374 1>, <129 377 1>, + <130 428 1>, <131 434 2>, <133 437 1>, + <134 452 2>, <136 458 2>, <138 464 11>, + <149 671 1>, <150 688 1>, <151 714 2>, + <153 722 1>, <154 255 1>, <155 269 2>, + <157 276 1>, <158 287 1>, <159 306 4>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c228000 { + compatible = "qcom,eliza-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c228000 0x0 0x1000>, + <0x0 0x0c222000 0x0 0x1000>; + + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c229000 { + compatible = "qcom,eliza-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c229000 0x0 0x1000>, + <0x0 0x0c223000 0x0 0x1000>; + + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <14>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c22a000 { + compatible = "qcom,eliza-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22a000 0x0 0x1000>, + <0x0 0x0c224000 0x0 0x1000>; + + interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <5>; + + #thermal-sensor-cells = <1>; + }; + + spmi: arbiter@c400000 { + compatible = "qcom,eliza-spmi-pmic-arb", + "qcom,x1e80100-spmi-pmic-arb"; + reg = <0x0 0x0c400000 0x0 0x3000>, + <0x0 0x0c500000 0x0 0x400000>, + <0x0 0x0c440000 0x0 0x80000>; + reg-names = "core", + "chnls", + "obsrvr"; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + spmi_bus0: spmi@c42d000 { + reg = <0x0 0x0c42d000 0x0 0x4000>, + <0x0 0x0c4c0000 0x0 0x10000>; + reg-names = "cnfg", + "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + spmi_bus1: spmi@c432000 { + reg = <0x0 0x0c432000 0x0 0x4000>, + <0x0 0x0c4d0000 0x0 0x10000>; + reg-names = "cnfg", + "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,eliza-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 493 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <2>; + #global-interrupts = <1>; + + dma-coherent; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17100000 0x0 0x10000>, + <0x0 0x17180000 0x0 0x200000>; + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <3>; + interrupt-controller; + + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x17140000 0x0 0x40000>; + + msi-controller; + #msi-cells = <1>; + }; + }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&cluster_pd>; + label = "apps_rsc"; + + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, + <SLEEP_TCS 2>, + <WAKE_TCS 2>, + <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,eliza-rpmh-clk"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmhpd: power-controller { + compatible = "qcom,eliza-rpmhpd"; + + operating-points-v2 = <&rpmhpd_opp_table>; + + #power-domain-cells = <1>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-48 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs_d3: opp-50 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D3>; + }; + + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_svs_l2: opp-224 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-336 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + rpmhpd_opp_turbo_l2: opp-432 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>; + }; + + rpmhpd_opp_turbo_l3: opp-448 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>; + }; + + rpmhpd_opp_turbo_l4: opp-452 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>; + }; + + rpmhpd_opp_super_turbo_no_cpr: opp-480 { + opp-level = <RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR>; + }; + }; + }; + }; + + epss_l3: interconnect@17d90000 { + compatible = "qcom,eliza-epss-l3", "qcom,epss-l3"; + reg = <0x0 0x17d90000 0x0 0x1000>; + + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,eliza-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0x0 0x17d91000 0x0 0x1000>, + <0x0 0x17d92000 0x0 0x1000>, + <0x0 0x17d93000 0x0 0x1000>; + reg-names = "freq-domain0", + "freq-domain1", + "freq-domain2"; + + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1", + "dcvsh-irq-2"; + + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,eliza-tlmm"; + reg = <0x0 0x0f100000 0x0 0xf00000>; + + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 184>; + wakeup-parent = <&pdc>; + + qup_uart14_default: qup-uart14-default-state { + /* TX, RX */ + pins = "gpio18", "gpio19"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + gem_noc: interconnect@24100000 { + compatible = "qcom,eliza-gem-noc"; + reg = <0x0 0x24100000 0x0 0x163080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,eliza-nsp-noc"; + reg = <0x0 0x320c0000 0x0 0xe080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + }; + + thermal-zones { + aoss0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + aoss-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + aoss-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + aoss-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + aoss-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + aoss-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + aoss-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens1 12>; + + trips { + camera-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + camera-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + thermal-sensors = <&tsens1 13>; + + trips { + camera-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + camera-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + thermal-sensors = <&tsens1 1>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + thermal-sensors = <&tsens1 2>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-top-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-bottom-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-top-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + thermal-sensors = <&tsens0 12>; + + trips { + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + cpuss-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + cpuss-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + cpuss-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + cpuss-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + thermal-sensors = <&tsens1 11>; + + trips { + ddr-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + ddr-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens1 8>; + + trips { + gpu-alert { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens1 9>; + + trips { + gpu-alert { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem0-thermal { + thermal-sensors = <&tsens2 1>; + + trips { + modem-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + modem-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + thermal-sensors = <&tsens2 2>; + + trips { + modem-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + modem-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem2-thermal { + thermal-sensors = <&tsens2 3>; + + trips { + modem-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + modem-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem3-thermal { + thermal-sensors = <&tsens2 4>; + + trips { + modem-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + modem-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx0-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + nsphmx-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + nsphmx-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx1-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + nsphmx-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + nsphmx-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx0-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + nsphvx-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + nsphvx-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx1-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + nsphvx-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + nsphvx-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens1 10>; + + trips { + video-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + video-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts new file mode 100644 index 000000000000..51ea23a49b9e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include "glymur.dtsi" +#include "glymur-crd.dtsi" + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Qualcomm Technologies, Inc. Glymur CRD"; + compatible = "qcom,glymur-crd", "qcom,glymur"; + + pmic-glink { + compatible = "qcom,glymur-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_0_qmpphy_out>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in1: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in1: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmh0110_f_e0_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_e0_1p8>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_e0_1p8>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@38 { + compatible = "hid-over-i2c"; + reg = <0x38>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_e0_1p8>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + ptn3222_0: redriver@43 { + compatible = "nxp,ptn3222"; + reg = <0x43>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd3v3-supply = <&vreg_l8b_e0_1p50>; + vdd1v8-supply = <&vreg_l15b_e0_1p8>; + + #phy-cells = <0>; + }; + + ptn3222_1: redriver@47 { + compatible = "nxp,ptn3222"; + reg = <0x47>; + + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; + + vdd3v3-supply = <&vreg_l8b_e0_1p50>; + vdd1v8-supply = <&vreg_l15b_e0_1p8>; + + #phy-cells = <0>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "samsung,atna60cl08", "samsung,atna33xc20"; + enable-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_3p3>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; +}; + +&mdss_dp3_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l2f_e1_0p83>; + vdda-pll-supply = <&vreg_l4f_e1_1p08>; + + status = "okay"; +}; + +&pmh0110_f_e0_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-disable; + output-enable; + drive-push-pull; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + +&smb2370_j_e2_eusb2_repeater { + vdd18-supply = <&vreg_l15b_e0_1p8>; + vdd3-supply = <&vreg_l7b_e0_2p79>; +}; + +&smb2370_k_e2_eusb2_repeater { + vdd18-supply = <&vreg_l15b_e0_1p8>; + vdd3-supply = <&vreg_l7b_e0_2p79>; +}; + +&tlmm { + edp_bl_en: edp-bl-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; +}; + +&usb_0 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_0_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_0_hsphy { + vdd-supply = <&vreg_l3f_e0_0p72>; + vdda12-supply = <&vreg_l4h_e0_1p2>; + + phys = <&smb2370_j_e2_eusb2_repeater>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l4h_e0_1p2>; + vdda-pll-supply = <&vreg_l3f_e0_0p72>; + refgen-supply = <&vreg_l2f_e0_0p82>; + + status = "okay"; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in1>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l3f_e0_0p72>; + vdda12-supply = <&vreg_l4h_e0_1p2>; + + phys = <&smb2370_k_e2_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4h_e0_1p2>; + vdda-pll-supply = <&vreg_l1h_e0_0p89>; + refgen-supply = <&vreg_l2f_e0_0p82>; + + status = "okay"; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in1>; +}; + +&usb_hs { + status = "okay"; +}; + +&usb_hs_phy { + vdd-supply = <&vreg_l2h_e0_0p72>; + vdda12-supply = <&vreg_l4h_e0_1p2>; + + phys = <&ptn3222_1>; + + status = "okay"; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2h_e0_0p72>; + vdda12-supply = <&vreg_l4h_e0_1p2>; + + phys = <&ptn3222_0>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2h_e0_0p72>; + vdda12-supply = <&vreg_l4h_e0_1p2>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l4h_e0_1p2>; + vdda-pll-supply = <&vreg_l2h_e0_0p72>; + refgen-supply = <&vreg_l4f_e1_1p08>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l4h_e0_1p2>; + vdda-pll-supply = <&vreg_l2h_e0_0p72>; + refgen-supply = <&vreg_l4f_e1_1p08>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi new file mode 100644 index 000000000000..2852d257ac8c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi @@ -0,0 +1,697 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include "pmcx0102.dtsi" /* SPMI0: SID-2/3 SPMI1: SID-2/3 */ +#include "pmh0101.dtsi" /* SPMI0: SID-1 */ +#include "pmh0110-glymur.dtsi" /* SPMI0: SID-5/7 SPMI1: SID-5 */ +#include "pmh0104-glymur.dtsi" /* SPMI0: SID-8/9 SPMI1: SID-11 */ +#include "pmk8850.dtsi" /* SPMI0: SID-0 */ +#include "smb2370.dtsi" /* SPMI2: SID-9/10/11 */ + +/ { + model = "Qualcomm Technologies, Inc. Glymur CRD"; + compatible = "qcom,glymur-crd", "qcom,glymur"; + + aliases { + serial0 = &uart21; + serial1 = &uart14; + i2c0 = &i2c0; + i2c1 = &i2c4; + i2c2 = &i2c5; + spi0 = &spi18; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <38400000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&key_vol_up_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pmh0101_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmh0101_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvmesec: regulator-nvmesec { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_SEC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmh0110_f_e1_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_sec_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 94 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WWAN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 246 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wwan_reg_en>; + pinctrl-names = "default"; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_e0_1p8>; + vddaon-supply = <&vreg_l15b_e0_1p8>; + vdddig-supply = <&vreg_l15b_e0_1p8>; + vddrfa1p2-supply = <&vreg_l15b_e0_1p8>; + vddrfa1p8-supply = <&vreg_l15b_e0_1p8>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmh0101-rpmh-regulators"; + qcom,pmic-id = "B_E0"; + + vreg_bob1_e0: bob1 { + regulator-name = "vreg_bob1_e0"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <4224000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_bob2_e0: bob2 { + regulator-name = "vreg_bob2_e0"; + regulator-min-microvolt = <2540000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1b_e0_1p8: ldo1 { + regulator-name = "vreg_l1b_e0_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_e0_2p9: ldo2 { + regulator-name = "vreg_l2b_e0_2p9"; + regulator-min-microvolt = <2904000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_e0_2p79: ldo7 { + regulator-name = "vreg_l7b_e0_2p79"; + regulator-min-microvolt = <2790000>; + regulator-max-microvolt = <2792000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_e0_1p50: ldo8 { + regulator-name = "vreg_l8b_e0_1p50"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_e0_2p7: ldo9 { + regulator-name = "vreg_l9b_e0_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_e0_1p8: ldo10 { + regulator-name = "vreg_l10b_e0_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_e0_1p2: ldo11 { + regulator-name = "vreg_l11b_e0_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_e0_1p14: ldo12 { + regulator-name = "vreg_l12b_e0_1p14"; + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1144000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_e0_1p8: ldo15 { + regulator-name = "vreg_l15b_e0_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_e0_2p4: ldo17 { + regulator-name = "vreg_l17b_e0_2p4"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_e0_1p2: ldo18 { + regulator-name = "vreg_l18b_e0_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmcx0102-rpmh-regulators"; + qcom,pmic-id = "C_E1"; + + vreg_l1c_e1_0p82: ldo1 { + regulator-name = "vreg_l1c_e1_0p82"; + regulator-min-microvolt = <832000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_e1_1p14: ldo2 { + regulator-name = "vreg_l2c_e1_1p14"; + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1144000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_e1_0p89: ldo3 { + regulator-name = "vreg_l3c_e1_0p89"; + regulator-min-microvolt = <890000>; + regulator-max-microvolt = <980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_e1_0p72: ldo4 { + regulator-name = "vreg_l4c_e1_0p72"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <720000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "F_E0"; + + vreg_s7f_e0_1p32: smps7 { + regulator-name = "vreg_s7f_e0_1p32"; + regulator-min-microvolt = <1320000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8f_e0_0p95: smps8 { + regulator-name = "vreg_s8f_e0_0p95"; + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9f_e0_1p9: smps9 { + regulator-name = "vreg_s9f_e0_1p9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_e0_0p82: ldo2 { + regulator-name = "vreg_l2f_e0_0p82"; + regulator-min-microvolt = <832000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_e0_0p72: ldo3 { + regulator-name = "vreg_l3f_e0_0p72"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <720000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4f_e0_0p3: ldo4 { + regulator-name = "vreg_l4f_e0_0p3"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "F_E1"; + + vreg_s7f_e1_0p3: smps7 { + regulator-name = "vreg_s7f_e1_0p3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_e1_0p82: ldo1 { + regulator-name = "vreg_l1f_e1_0p82"; + regulator-min-microvolt = <832000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_e1_0p83: ldo2 { + regulator-name = "vreg_l2f_e1_0p83"; + regulator-min-microvolt = <832000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4f_e1_1p08: ldo4 { + regulator-name = "vreg_l4f_e1_1p08"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "H_E0"; + + vreg_l1h_e0_0p89: ldo1 { + regulator-name = "vreg_l1h_e0_0p89"; + regulator-min-microvolt = <832000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2h_e0_0p72: ldo2 { + regulator-name = "vreg_l2h_e0_0p72"; + regulator-min-microvolt = <832000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3h_e0_0p32: ldo3 { + regulator-name = "vreg_l3h_e0_0p32"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4h_e0_1p2: ldo4 { + regulator-name = "vreg_l4h_e0_1p2"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&pcie3b { + vddpe-3v3-supply = <&vreg_nvmesec>; + + pinctrl-0 = <&pcie3b_default>; + pinctrl-names = "default"; +}; + +&pcie3b_phy { + vdda-phy-supply = <&vreg_l3c_e1_0p89>; + vdda-pll-supply = <&vreg_l2c_e1_1p14>; +}; + +&pcie3b_port0 { + reset-gpios = <&tlmm 155 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 157 GPIO_ACTIVE_LOW>; +}; + +&pcie4 { + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l1c_e1_0p82>; + vdda-pll-supply = <&vreg_l4f_e1_1p08>; + + status = "okay"; +}; + +&pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie5 { + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie5_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie5_phy { + vdda-phy-supply = <&vreg_l2f_e0_0p82>; + vdda-pll-supply = <&vreg_l4h_e0_1p2>; + + status = "okay"; +}; + +&pcie5_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + +&pcie6 { + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-0 = <&pcie6_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6_phy { + vdda-phy-supply = <&vreg_l1c_e1_0p82>; + vdda-pll-supply = <&vreg_l4f_e1_1p08>; + + status = "okay"; +}; + +&pcie6_port0 { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; +}; + +&pmh0101_gpios { + nvme_reg_en: nvme-reg-en-state { + pins = "gpio14"; + function = "normal"; + bias-disable; + }; +}; + +&pmh0110_f_e1_gpios { + nvme_sec_reg_en: nvme-reg-en-state { + pins = "gpio14"; + function = "normal"; + bias-disable; + }; +}; + +&pmh0101_gpios { + key_vol_up_default: key-vol-up-default-state { + pins = "gpio6"; + function = "normal"; + output-disable; + bias-pull-up; + }; +}; + +&pmk8850_rtc { + qcom,no-alarm; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */ + <10 2>, /* OOB UART */ + <44 4>; /* Security SPI (TPM) */ + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie5_default: pcie5-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie5_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6_default: pcie6-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie6_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio149"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3b_default: pcie3b-default-state { + clkreq-n-pins { + pins = "gpio156"; + function = "pcie3b_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio155"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio157"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wwan_reg_en: wwan-reg-en-state { + pins = "gpio246"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi new file mode 100644 index 000000000000..f23cf81ddb77 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/glymur.dtsi @@ -0,0 +1,7135 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/clock/qcom,glymur-dispcc.h> +#include <dt-bindings/clock/qcom,glymur-gcc.h> +#include <dt-bindings/clock/qcom,glymur-tcsr.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,glymur-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> +#include <dt-bindings/power/qcom,rpmhpd.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/spmi/spmi.h> + +#include "glymur-ipcc.h" + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,oryon-2-2"; + reg = <0x0 0x0>; + enable-method = "psci"; + power-domains = <&cpu_pd0>, <&scmi_perf 0>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_0>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,oryon-2-2"; + reg = <0x0 0x100>; + enable-method = "psci"; + power-domains = <&cpu_pd1>, <&scmi_perf 0>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_0>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,oryon-2-2"; + reg = <0x0 0x200>; + enable-method = "psci"; + power-domains = <&cpu_pd2>, <&scmi_perf 0>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_0>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,oryon-2-2"; + reg = <0x0 0x300>; + enable-method = "psci"; + power-domains = <&cpu_pd3>, <&scmi_perf 0>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_0>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,oryon-2-2"; + reg = <0x0 0x400>; + enable-method = "psci"; + power-domains = <&cpu_pd4>, <&scmi_perf 0>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_0>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,oryon-2-2"; + reg = <0x0 0x500>; + enable-method = "psci"; + power-domains = <&cpu_pd5>, <&scmi_perf 0>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_0>; + }; + + cpu6: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x10000>; + enable-method = "psci"; + power-domains = <&cpu_pd6>, <&scmi_perf 1>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_1>; + + l2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + cpu7: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x10100>; + enable-method = "psci"; + power-domains = <&cpu_pd7>, <&scmi_perf 1>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_1>; + }; + + cpu8: cpu@10200 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x10200>; + enable-method = "psci"; + power-domains = <&cpu_pd8>, <&scmi_perf 1>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_1>; + }; + + cpu9: cpu@10300 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x10300>; + enable-method = "psci"; + power-domains = <&cpu_pd9>, <&scmi_perf 1>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_1>; + }; + + cpu10: cpu@10400 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x10400>; + enable-method = "psci"; + power-domains = <&cpu_pd10>, <&scmi_perf 1>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_1>; + }; + + cpu11: cpu@10500 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x10500>; + enable-method = "psci"; + power-domains = <&cpu_pd11>, <&scmi_perf 1>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_1>; + }; + + cpu12: cpu@20000 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x20000>; + enable-method = "psci"; + power-domains = <&cpu_pd12>, <&scmi_perf 2>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_2>; + + l2_2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + cpu13: cpu@20100 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x20100>; + enable-method = "psci"; + power-domains = <&cpu_pd13>, <&scmi_perf 2>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_2>; + }; + + cpu14: cpu@20200 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x20200>; + enable-method = "psci"; + power-domains = <&cpu_pd14>, <&scmi_perf 2>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_2>; + }; + + cpu15: cpu@20300 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x20300>; + enable-method = "psci"; + power-domains = <&cpu_pd15>, <&scmi_perf 2>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_2>; + }; + + cpu16: cpu@20400 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x20400>; + enable-method = "psci"; + power-domains = <&cpu_pd16>, <&scmi_perf 2>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_2>; + }; + + cpu17: cpu@20500 { + device_type = "cpu"; + compatible = "qcom,oryon-2-1"; + reg = <0x0 0x20500>; + enable-method = "psci"; + power-domains = <&cpu_pd17>, <&scmi_perf 2>; + power-domain-names = "psci", "perf"; + next-level-cache = <&l2_2>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu6>; + }; + + core1 { + cpu = <&cpu7>; + }; + + core2 { + cpu = <&cpu8>; + }; + + core3 { + cpu = <&cpu9>; + }; + + core4 { + cpu = <&cpu10>; + }; + + core5 { + cpu = <&cpu11>; + }; + }; + + cpu_map_cluster2: cluster2 { + core0 { + cpu = <&cpu12>; + }; + + core1 { + cpu = <&cpu13>; + }; + + core2 { + cpu = <&cpu14>; + }; + + core3 { + cpu = <&cpu15>; + }; + + core4 { + cpu = <&cpu16>; + }; + + core5 { + cpu = <&cpu17>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + cpu_c4: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "ret"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <180>; + exit-latency-us = <320>; + min-residency-us = <1000>; + }; + }; + + domain-idle-states { + cluster_cl5: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x01000054>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <9000>; + }; + + domain_ss3: domain-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x0200c354>; + entry-latency-us = <2800>; + exit-latency-us = <4400>; + min-residency-us = <10150>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-glymur", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x4000>; + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + }; + + scmi { + compatible = "arm,scmi"; + mboxes = <&pdp0_mbox 0>, <&pdp0_mbox 1>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri1>, <&cpu_scp_lpri0>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_perf: protocol@13 { + reg = <0x13>; + #power-domain-cells = <1>; + }; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,glymur-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,glymur-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster0_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster0_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster0_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster0_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&cluster0_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&cluster0_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&cluster1_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&cluster1_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd8: power-domain-cpu8 { + #power-domain-cells = <0>; + power-domains = <&cluster1_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd9: power-domain-cpu9 { + #power-domain-cells = <0>; + power-domains = <&cluster1_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd10: power-domain-cpu10 { + #power-domain-cells = <0>; + power-domains = <&cluster1_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd11: power-domain-cpu11 { + #power-domain-cells = <0>; + power-domains = <&cluster1_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd12: power-domain-cpu12 { + #power-domain-cells = <0>; + power-domains = <&cluster2_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd13: power-domain-cpu13 { + #power-domain-cells = <0>; + power-domains = <&cluster2_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd14: power-domain-cpu14 { + #power-domain-cells = <0>; + power-domains = <&cluster2_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd15: power-domain-cpu15 { + #power-domain-cells = <0>; + power-domains = <&cluster2_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd16: power-domain-cpu16 { + #power-domain-cells = <0>; + power-domains = <&cluster2_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cpu_pd17: power-domain-cpu17 { + #power-domain-cells = <0>; + power-domains = <&cluster2_pd>; + domain-idle-states = <&cpu_c4>; + }; + + cluster0_pd: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + power-domains = <&system_pd>; + domain-idle-states = <&cluster_cl5>; + }; + + cluster1_pd: power-domain-cpu-cluster1 { + #power-domain-cells = <0>; + power-domains = <&system_pd>; + domain-idle-states = <&cluster_cl5>; + }; + + cluster2_pd: power-domain-cpu-cluster2 { + #power-domain-cells = <0>; + power-domains = <&system_pd>; + domain-idle-states = <&cluster_cl5>; + }; + + system_pd: power-domain-system { + #power-domain-cells = <0>; + domain-idle-states = <&domain_ss3>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + pdp_mem: pdp@81400000 { + reg = <0x0 0x81400000 0x0 0x100000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + pdp_ns_shared_mem: pdp-ns-shared@81e00000 { + reg = <0x0 0x81e00000 0x0 0x200000>; + no-map; + }; + + oobdaretag_mem: oobdaretag@86e10000 { + reg = <0x0 0x86e10000 0x0 0x360000>; + no-map; + }; + + oob_secure_mem: oob-secure@87170000 { + reg = <0x0 0x87170000 0x0 0xbc0000>; + no-map; + }; + + oobdtbqc_mem: oobdtbqc@87d30000 { + reg = <0x0 0x87d30000 0x0 0x20000>; + no-map; + }; + + oobdtboem_mem: oobdtboem@87d50000 { + reg = <0x0 0x87d50000 0x0 0x20000>; + no-map; + }; + + oob_nonsecure_mem: oob-nonsecure@87e00000 { + reg = <0x0 0x87e00000 0x0 0xc00000>; + no-map; + }; + + spss_region_mem: spss@88a00000 { + reg = <0x0 0x88a00000 0x0 0x400000>; + no-map; + }; + + soccpdtb_mem: soccpdtb@892e0000 { + reg = <0x0 0x892e0000 0x0 0x20000>; + no-map; + }; + + soccp_mem: soccp@89300000 { + reg = <0x0 0x89300000 0x0 0x400000>; + no-map; + }; + + cvp_mem: cvp@89700000 { + reg = <0x0 0x89700000 0x0 0x700000>; + no-map; + }; + + adspslpi_mem: adspslpi@89e00000 { + reg = <0x0 0x89e00000 0x0 0x3a00000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@8d800000 { + reg = <0x0 0x8d800000 0x0 0x80000>; + no-map; + }; + + cdsp_mem: cdsp@8d900000 { + reg = <0x0 0x8d900000 0x0 0x4000000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb@91900000 { + reg = <0x0 0x91900000 0x0 0x80000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@919fe000 { + reg = <0x0 0x919fe000 0x0 0x2000>; + no-map; + }; + + camera_mem: camera@91a00000 { + reg = <0x0 0x91a00000 0x0 0x800000>; + no-map; + }; + + av1_encoder_mem: av1-encoder@92200000 { + reg = <0x0 0x92200000 0x0 0x700000>; + no-map; + }; + + video_mem: video@92900000 { + reg = <0x0 0x92900000 0x0 0xc00000>; + no-map; + }; + + smem_mem: smem@ffe00000 { + compatible = "qcom,smem"; + reg = <0x0 0xffe00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_MPROC_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_MPROC_LPASS IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_MPROC_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_MPROC_CDSP IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-soccp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_MPROC_SOCCP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_MPROC_SOCCP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <617>, <616>; + qcom,local-pid = <0>; + qcom,remote-pid = <19>; + + soccp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + soccp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + + gcc: clock-controller@100000 { + compatible = "qcom,glymur-gcc"; + reg = <0x0 0x00100000 0x0 0x1f9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, /* Board XO source */ + <&rpmhcc RPMH_CXO_CLK_A>, /* Board XO_A source */ + <&sleep_clk>, /* Sleep */ + <0>, /* USB 0 Phy DP0 GMUX */ + <0>, /* USB 0 Phy DP1 GMUX */ + <0>, /* USB 0 Phy PCIE PIPEGMUX */ + <0>, /* USB 0 Phy PIPEGMUX */ + <0>, /* USB 0 Phy SYS PCIE PIPEGMUX */ + <0>, /* USB 1 Phy DP0 GMUX 2 */ + <0>, /* USB 1 Phy DP1 GMUX 2 */ + <0>, /* USB 1 Phy PCIE PIPEGMUX */ + <0>, /* USB 1 Phy PIPEGMUX */ + <0>, /* USB 1 Phy SYS PCIE PIPEGMUX */ + <0>, /* USB 2 Phy DP0 GMUX 2 */ + <0>, /* USB 2 Phy DP1 GMUX 2 */ + <0>, /* USB 2 Phy PCIE PIPEGMUX */ + <0>, /* USB 2 Phy PIPEGMUX */ + <0>, /* USB 2 Phy SYS PCIE PIPEGMUX */ + <0>, /* PCIe 3a */ + <&pcie3b_phy>, /* PCIe 3b */ + <&pcie4_phy>, /* PCIe 4 */ + <&pcie5_phy>, /* PCIe 5 */ + <&pcie6_phy>, /* PCIe 6 */ + <0>, /* QUSB4 0 PHY RX 0 */ + <0>, /* QUSB4 0 PHY RX 1 */ + <0>, /* QUSB4 1 PHY RX 0 */ + <0>, /* QUSB4 1 PHY RX 1 */ + <0>, /* QUSB4 2 PHY RX 0 */ + <0>, /* QUSB4 2 PHY RX 1 */ + <0>, /* UFS PHY RX Symbol 0 */ + <0>, /* UFS PHY RX Symbol 1 */ + <0>, /* UFS PHY TX Symbol 0 */ + <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_mp_qmpphy0 QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_mp_qmpphy1 QMP_USB43DP_USB3_PIPE_CLK>, + <0>, /* USB4 PHY 0 pcie pipe */ + <0>, /* USB4 PHY 0 Max pipe */ + <0>, /* USB4 PHY 1 pcie pipe */ + <0>, /* USB4 PHY 1 Max pipe */ + <0>, /* USB4 PHY 2 pcie */ + <0>; /* USB4 PHY 2 Max */ + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,glymur-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00800000 0x0 0x60000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 132 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <16>; + dma-channel-mask = <0x3f>; + #dma-cells = <3>; + iommus = <&apps_smmu 0xd76 0x0>; + }; + + qupv3_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x3000>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + iommus = <&apps_smmu 0xd63 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c16: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00880000 0x0 0x4000>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c16_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi16: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00880000 0x0 0x4000>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c17: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00884000 0x0 0x4000>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c17_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi17: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00884000 0x0 0x4000>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c18: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c18_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi18: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c19: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0088c000 0x0 0x4000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c19_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi19: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0088c000 0x0 0x4000>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart19: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x0088c000 0x0 0x4000>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + pinctrl-0 = <&qup_uart19_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c20: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c20_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi20: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00890000 0x0 0x4000>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c21: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00894000 0x0 0x4000>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c21_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi21: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00894000 0x0 0x4000>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart21: serial@894000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00894000 0x0 0x4000>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + pinctrl-0 = <&qup_uart21_default>; + pinctrl-names = "default"; + }; + + i2c22: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00898000 0x0 0x4000>; + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, + <&gpi_dma2 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c22_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi22: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00898000 0x0 0x4000>; + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart22: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00898000 0x0 0x4000>; + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + pinctrl-0 = <&qup_uart22_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c23: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0089c000 0x0 0x4000>; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>, + <&gpi_dma2 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c23_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi23: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0089c000 0x0 0x4000>; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>, + <&gpi_dma2 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,glymur-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00a00000 0x0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 127 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <16>; + dma-channel-mask = <0x3f>; + #dma-cells = <3>; + iommus = <&apps_smmu 0xcb6 0x0>; + }; + + qupv3_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x3000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + iommus = <&apps_smmu 0xca3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a80000 0x0 0x4000>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c8_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a80000 0x0 0x4000>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a84000 0x0 0x4000>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a84000 0x0 0x4000>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a88000 0x0 0x4000>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a88000 0x0 0x4000>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a90000 0x0 0x4000>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a90000 0x0 0x4000>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a94000 0x0 0x4000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a94000 0x0 0x4000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a98000 0x0 0x4000>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c14_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a98000 0x0 0x4000>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a98000 0x0 0x4000>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + pinctrl-0 = <&qup_uart14_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a9c000 0x0 0x4000>; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c15_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a9c000 0x0 0x4000>; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@b00000 { + compatible = "qcom,glymur-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00b00000 0x0 0x60000>; + interrupts = <GIC_ESPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_ESPI 91 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <16>; + dma-channel-mask = <0x3f>; + #dma-cells = <3>; + iommus = <&apps_smmu 0xd36 0x0>; + }; + + qupv3_0: geniqup@bc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00bc0000 0x0 0x3000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + iommus = <&apps_smmu 0xd23 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c0: i2c@b80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00b80000 0x0 0x4000>; + interrupts = <GIC_ESPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@b80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00b80000 0x0 0x4000>; + interrupts = <GIC_SPI 1052 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@b84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00b84000 0x0 0x4000>; + interrupts = <GIC_SPI 1053 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@b84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00b84000 0x0 0x4000>; + interrupts = <GIC_SPI 1053 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@b88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00b88000 0x0 0x4000>; + interrupts = <GIC_SPI 1054 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi2: spi@b88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00b88000 0x0 0x4000>; + interrupts = <GIC_SPI 1054 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart2: serial@b88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00b88000 0x0 0x4000>; + interrupts = <GIC_SPI 1054 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + pinctrl-0 = <&qup_uart2_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c3: i2c@b8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00b8c000 0x0 0x4000>; + interrupts = <GIC_ESPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@b8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00b8c000 0x0 0x4000>; + interrupts = <GIC_SPI 1055 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@b90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00b90000 0x0 0x4000>; + interrupts = <GIC_ESPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@b90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00b90000 0x0 0x4000>; + interrupts = <GIC_SPI 1056 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c5: i2c@b94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00b94000 0x0 0x4000>; + interrupts = <GIC_ESPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi5: spi@b94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00b94000 0x0 0x4000>; + interrupts = <GIC_SPI 1057 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c6: i2c@b98000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00b98000 0x0 0x4000>; + interrupts = <GIC_SPI 1058 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi6: spi@b98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00b98000 0x0 0x4000>; + interrupts = <GIC_SPI 1058 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c7: i2c@b9c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00b9c000 0x0 0x4000>; + interrupts = <GIC_SPI 1059 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi7: spi@b9c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00b9c000 0x0 0x4000>; + interrupts = <GIC_SPI 1059 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + usb_hs_phy: phy@fa0000 { + compatible = "qcom,glymur-m31-eusb2-phy", + "qcom,sm8750-m31-eusb2-phy"; + reg = <0x0 0x00fa0000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_USB20_HS_BCR>; + + status = "disabled"; + }; + + usb_mp_hsphy0: phy@fa1000 { + compatible = "qcom,glymur-m31-eusb2-phy", + "qcom,sm8750-m31-eusb2-phy"; + + reg = <0x0 0x00fa1000 0x0 0x29c>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; + + status = "disabled"; + }; + + usb_mp_hsphy1: phy@fa2000 { + compatible = "qcom,glymur-m31-eusb2-phy", + "qcom,sm8750-m31-eusb2-phy"; + + reg = <0x0 0x00fa2000 0x0 0x29c>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; + + status = "disabled"; + }; + + usb_mp_qmpphy0: phy@fa3000 { + compatible = "qcom,glymur-qmp-usb3-uni-phy"; + reg = <0x0 0x00fa3000 0x0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&tcsr TCSR_USB3_0_CLKREF_EN>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", + "clkref", + "ref", + "com_aux", + "pipe"; + + power-domains = <&gcc GCC_USB3_MP_SS0_PHY_GDSC>; + + resets = <&gcc GCC_USB3_MP_SS0_PHY_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", + "phy_phy"; + + clock-output-names = "usb3_uni_phy_0_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_mp_qmpphy1: phy@fa5000 { + compatible = "qcom,glymur-qmp-usb3-uni-phy"; + reg = <0x0 0x00fa5000 0x0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&tcsr TCSR_USB3_1_CLKREF_EN>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "aux", + "clkref", + "ref", + "com_aux", + "pipe"; + + power-domains = <&gcc GCC_USB3_MP_SS1_PHY_GDSC>; + + resets = <&gcc GCC_USB3_MP_SS1_PHY_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", + "phy_phy"; + + clock-output-names = "usb3_uni_phy_1_pipe_clk_src"; + + #clock-cells = <0>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp3_phy: phy@faac00 { + compatible = "qcom,glymur-dp-phy"; + reg = <0x0 0x00faac00 0x0 0x1d0>, + <0x0 0x00faa400 0x0 0x128>, + <0x0 0x00faa800 0x0 0x128>, + <0x0 0x00faa000 0x0 0x358>; + + clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&tcsr TCSR_EDP_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb", + "ref"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_0_hsphy: phy@fd3000 { + compatible = "qcom,glymur-m31-eusb2-phy", + "qcom,sm8750-m31-eusb2-phy"; + + reg = <0x0 0x00fd3000 0x0 0x29c>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_0_qmpphy: phy@fd5000 { + compatible = "qcom,glymur-qmp-usb3-dp-phy"; + reg = <0x0 0x00fd5000 0x0 0x8000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; + + reset-names = "phy", + "common"; + + power-domains = <&gcc GCC_USB_0_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + mode-switch; + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_0_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_0_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_0_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + }; + }; + + usb_1_hsphy: phy@fdd000 { + compatible = "qcom,glymur-m31-eusb2-phy", + "qcom,sm8750-m31-eusb2-phy"; + + reg = <0x0 0x00fdd000 0x0 0x29c>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy@fde000 { + compatible = "qcom,glymur-qmp-usb3-dp-phy"; + reg = <0x0 0x00fde000 0x0 0x8000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>, + <&tcsr TCSR_USB4_1_CLKREF_EN>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe", + "clkref"; + + power-domains = <&gcc GCC_USB_1_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + mode-switch; + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp1_out>; + }; + }; + }; + }; + + + /* cluster0 */ + bwmon_cluster0: pmu@100c400 { + compatible = "qcom,glymur-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x0100c400 0x0 0x600>; + + interrupts = <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + + opp-1 { + opp-peak-kBps = <2188800>; + }; + + opp-2 { + opp-peak-kBps = <5414400>; + }; + + opp-3 { + opp-peak-kBps = <6220800>; + }; + + opp-4 { + opp-peak-kBps = <6835200>; + }; + + opp-5 { + opp-peak-kBps = <8371200>; + }; + + opp-6 { + opp-peak-kBps = <10944000>; + }; + + opp-7 { + opp-peak-kBps = <12748800>; + }; + + opp-8 { + opp-peak-kBps = <14745600>; + }; + + opp-9 { + opp-peak-kBps = <16896000>; + }; + + opp-10 { + opp-peak-kBps = <19046400>; + }; + + opp-11 { + opp-peak-kBps = <21332000>; + }; + }; + }; + + /* cluster1 */ + bwmon_cluster1: pmu@100d400 { + compatible = "qcom,glymur-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x0100d400 0x0 0x600>; + + interrupts = <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + + /* cluster2 */ + bwmon_cluster2: pmu@100e400 { + compatible = "qcom,glymur-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x0100e400 0x0 0x600>; + + interrupts = <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + cnoc_main: interconnect@1500000 { + compatible = "qcom,glymur-cnoc-main"; + reg = <0x0 0x01500000 0x0 0x17080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,glymur-cnoc-cfg"; + reg = <0x0 0x01600000 0x0 0x6600>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,glymur-system-noc"; + reg = <0x0 0x01680000 0x0 0x1c080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + pcie_west_anoc: interconnect@16c0000 { + compatible = "qcom,glymur-pcie-west-anoc"; + reg = <0x0 0x016c0000 0x0 0xf580>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_3A_WEST_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_3B_WEST_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_WEST_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_6_WEST_SF_AXI_CLK>; + }; + + pcie_east_anoc: interconnect@16d0000 { + compatible = "qcom,glymur-pcie-east-anoc"; + reg = <0x0 0x016d0000 0x0 0xf300>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_5_EAST_SF_AXI_CLK>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,glymur-aggre1-noc"; + reg = <0x0 0x016e0000 0x0 0x14400>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1720000 { + compatible = "qcom,glymur-aggre2-noc"; + reg = <0x0 0x01720000 0x0 0x14400>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>, + <&gcc GCC_AGGRE_USB4_2_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; + }; + + aggre3_noc: interconnect@1700000 { + compatible = "qcom,glymur-aggre3-noc"; + reg = <0x0 0x01700000 0x0 0x1d400>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + aggre4_noc: interconnect@1740000 { + compatible = "qcom,glymur-aggre4-noc"; + reg = <0x0 0x01740000 0x0 0x14400>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_AGGRE_USB4_0_AXI_CLK>, + <&gcc GCC_AGGRE_USB4_1_AXI_CLK>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,glymur-mmss-noc"; + reg = <0x0 0x01780000 0x0 0x5b800>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + pcie_east_slv_noc: interconnect@1900000 { + compatible = "qcom,glymur-pcie-east-slv-noc"; + reg = <0x0 0x01900000 0x0 0xe080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + pcie_west_slv_noc: interconnect@1920000 { + compatible = "qcom,glymur-pcie-west-slv-noc"; + reg = <0x0 0x01920000 0x0 0xf180>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + pcie4: pci@1bf0000 { + device_type = "pci"; + compatible = "qcom,glymur-pcie", "qcom,pcie-x1e80100"; + reg = <0x0 0x01bf0000 0x0 0x3000>, + <0x0 0x78000000 0x0 0xf20>, + <0x0 0x78000f40 0x0 0xa8>, + <0x0 0x78001000 0x0 0x4000>, + <0x0 0x78005000 0x0 0x100000>, + <0x0 0x01bf3000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x78105000 0x0 0x100000>, + <0x02000000 0x0 0x78205000 0x0 0x78205000 0x0 0x1dfb000>, + <0x03000000 0x7 0x80000000 0x7 0x80000000 0x0 0x20000000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <4>; + num-lanes = <2>; + + operating-points-v2 = <&pcie4_opp_table>; + + msi-map = <0x0 &gic_its 0xc0000 0x10000>; + iommu-map = <0x0 &pcie_smmu 0x40000 0x10000>; + + interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 944 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 513 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 514 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 515 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 516 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_WEST_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr"; + + assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_west_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &pcie_west_slv_noc SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_4_BCR>, + <&gcc GCC_PCIE_4_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_4_GDSC>; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55>; + + status = "disabled"; + + pcie4_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000-1 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + opp-level = <1>; + }; + + /* GEN 1 x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; + }; + + /* GEN 2 x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* GEN 2 x2 */ + opp-10000000-2 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <2>; + }; + + /* GEN 3 x1 */ + opp-8000000-3 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* GEN 3 x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; + }; + + /* GEN 4 x1 */ + opp-16000000-4 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <4>; + }; + + /* GEN 4 x2 */ + opp-32000000-4 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <4>; + }; + + }; + + pcie4_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + phys = <&pcie4_phy>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie4_phy: phy@1bf6000 { + compatible = "qcom,glymur-qmp-gen4x2-pcie-phy"; + reg = <0x0 0x01bf6000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_PHY_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_2_CLKREF_EN>, + <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_4_PIPE_CLK>, + <&gcc GCC_PCIE_4_PIPE_DIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_4_PHY_BCR>, + <&gcc GCC_PCIE_4_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_4_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie4_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie5: pci@1b40000 { + device_type = "pci"; + compatible = "qcom,glymur-pcie", "qcom,pcie-x1e80100"; + reg = <0x0 0x01b40000 0x0 0x3000>, + <0x0 0x7a000000 0x0 0xf20>, + <0x0 0x7a000f40 0x0 0xa8>, + <0x0 0x7a001000 0x0 0x4000>, + <0x0 0x7a100000 0x0 0x100000>, + <0x0 0x01b43000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x7a200000 0x0 0x100000>, + <0x02000000 0x0 0x7a300000 0x0 0x7a300000 0x0 0x3d00000>, + <0x03000000 0x7 0xa0000000 0x7 0xa0000000 0x0 0x40000000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <5>; + num-lanes = <4>; + + operating-points-v2 = <&pcie5_opp_table>; + + msi-map = <0x0 &gic_its 0xd0000 0x10000>; + iommu-map = <0x0 &pcie_smmu 0x50000 0x10000>; + + interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 522 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 526 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 428 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 429 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_5_AUX_CLK>, + <&gcc GCC_PCIE_5_CFG_AHB_CLK>, + <&gcc GCC_PCIE_5_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_5_SLV_AXI_CLK>, + <&gcc GCC_PCIE_5_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_5_EAST_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr"; + + assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_east_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &pcie_east_slv_noc SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_5_BCR>, + <&gcc GCC_PCIE_5_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_5_GDSC>; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; + eq-presets-32gts = /bits/ 8 <0x55 0x55 0x55 0x55>; + + status = "disabled"; + + pcie5_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000-1 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + opp-level = <1>; + }; + + /* GEN 1 x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; + }; + + /* GEN 1 x4 */ + opp-10000000-1 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <1>; + }; + + /* GEN 2 x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* GEN 2 x2 */ + opp-10000000-2 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <2>; + }; + + /* GEN 2 x4 */ + opp-20000000-2 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <2000000 1>; + opp-level = <2>; + }; + + /* GEN 3 x1 */ + opp-8000000-3 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* GEN 3 x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; + }; + + /* GEN 3 x4 */ + opp-32000000-3 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <3>; + }; + + /* GEN 4 x1 */ + opp-16000000-4 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <4>; + }; + + /* GEN 4 x2 */ + opp-32000000-4 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <4>; + }; + + /* GEN 4 x4 */ + opp-64000000-4 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <7876000 1>; + opp-level = <4>; + }; + + /* GEN 5 x1 */ + opp-32000000-5 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + opp-level = <5>; + }; + + /* GEN 5 x2 */ + opp-64000000-5 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <7876000 1>; + opp-level = <5>; + }; + + /* GEN 5 x4 */ + opp-128000000-5 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <15753000 1>; + opp-level = <5>; + }; + }; + + pcie5_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + phys = <&pcie5_phy>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie5_phy: phy@1b50000 { + compatible = "qcom,glymur-qmp-gen5x4-pcie-phy"; + reg = <0x0 0x01b50000 0x0 0x10000>; + + clocks = <&gcc GCC_PCIE_PHY_5_AUX_CLK>, + <&gcc GCC_PCIE_5_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_5_PIPE_CLK>, + <&gcc GCC_PCIE_5_PIPE_DIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_5_PHY_BCR>, + <&gcc GCC_PCIE_5_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_5_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie5_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie6: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,glymur-pcie", "qcom,pcie-x1e80100"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x7e000000 0x0 0xf20>, + <0x0 0x7e000f40 0x0 0xa8>, + <0x0 0x7e001000 0x0 0x4000>, + <0x0 0x7e100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x7e200000 0x0 0x100000>, + <0x02000000 0x0 0x7e300000 0x0 0x7e300000 0x0 0x1d00000>, + <0x03000000 0x7 0xe0000000 0x7 0xe0000000 0x0 0x20000000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <6>; + num-lanes = <2>; + + operating-points-v2 = <&pcie6_opp_table>; + + msi-map = <0x0 &gic_its 0xe0000 0x10000>; + iommu-map = <0x0 &pcie_smmu 0x60000 0x10000>; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 472 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 473 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 474 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 475 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_6_AUX_CLK>, + <&gcc GCC_PCIE_6_CFG_AHB_CLK>, + <&gcc GCC_PCIE_6_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_6_SLV_AXI_CLK>, + <&gcc GCC_PCIE_6_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_6_WEST_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr"; + + assigned-clocks = <&gcc GCC_PCIE_6_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_west_anoc MASTER_PCIE_6 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &pcie_west_slv_noc SLAVE_PCIE_6 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_6_BCR>, + <&gcc GCC_PCIE_6_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_6_GDSC>; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55>; + + status = "disabled"; + + pcie6_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000-1 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + opp-level = <1>; + }; + + /* GEN 1 x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; + }; + + /* GEN 2 x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* GEN 2 x2 */ + opp-10000000-2 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <2>; + }; + + /* GEN 3 x1 */ + opp-8000000-3 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* GEN 3 x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; + }; + + /* GEN 4 x1 */ + opp-16000000-4 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <4>; + }; + + /* GEN 4 x2 */ + opp-32000000-4 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <4>; + }; + + }; + + pcie6_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + phys = <&pcie6_phy>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie6_phy: phy@1c06000 { + compatible = "qcom,glymur-qmp-gen4x2-pcie-phy"; + reg = <0x0 0x01c06000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_PHY_6_AUX_CLK>, + <&gcc GCC_PCIE_6_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_4_CLKREF_EN>, + <&gcc GCC_PCIE_6_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_6_PIPE_CLK>, + <&gcc GCC_PCIE_6_PIPE_DIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_6_PHY_BCR>, + <&gcc GCC_PCIE_6_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_6_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie6_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie3b: pci@1b80000 { + device_type = "pci"; + compatible = "qcom,glymur-pcie", "qcom,pcie-x1e80100"; + reg = <0x0 0x01b80000 0x0 0x3000>, + <0x0 0x74000000 0x0 0xf20>, + <0x0 0x74000f40 0x0 0xa8>, + <0x0 0x74001000 0x0 0x4000>, + <0x0 0x74100000 0x0 0x100000>, + <0x0 0x01b83000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x74200000 0x0 0x100000>, + <0x02000000 0x0 0x74300000 0x0 0x74300000 0x0 0x3d00000>, + <0x03000000 0x7 0x40000000 0x7 0x40000000 0x0 0x40000000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <7>; + num-lanes = <4>; + + operating-points-v2 = <&pcie3b_opp_table>; + + msi-map = <0x0 &gic_its 0xf0000 0x10000>; + iommu-map = <0x0 &pcie_smmu 0x70000 0x10000>; + + interrupts = <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 943 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 831 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 832 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 833 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 834 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, + <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3B_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_3B_WEST_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr"; + + assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_west_anoc MASTER_PCIE_3B QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &pcie_west_slv_noc SLAVE_PCIE_3B QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_3B_BCR>, + <&gcc GCC_PCIE_3B_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_3B_GDSC>; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; + eq-presets-32gts = /bits/ 8 <0x55 0x55 0x55 0x55>; + + status = "disabled"; + + pcie3b_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000-1 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + opp-level = <1>; + }; + + /* GEN 1 x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; + }; + + /* GEN 1 x4 */ + opp-10000000-1 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <1>; + }; + + /* GEN 2 x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* GEN 2 x2 */ + opp-10000000-2 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <2>; + }; + + /* GEN 2 x4 */ + opp-20000000-2 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <2000000 1>; + opp-level = <2>; + }; + + /* GEN 3 x1 */ + opp-8000000-3 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* GEN 3 x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; + }; + + /* GEN 3 x4 */ + opp-32000000-3 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <3>; + }; + + /* GEN 4 x1 */ + opp-16000000-4 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <4>; + }; + + /* GEN 4 x2 */ + opp-32000000-4 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <4>; + }; + + /* GEN 4 x4 */ + opp-64000000-4 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <7876000 1>; + opp-level = <4>; + }; + + /* GEN 5 x1 */ + opp-32000000-5 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + opp-level = <5>; + }; + + /* GEN 5 x2 */ + opp-64000000-5 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <7876000 1>; + opp-level = <5>; + }; + + /* GEN 5 x4 */ + opp-128000000-5 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <15753000 1>; + opp-level = <5>; + }; + }; + + pcie3b_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + phys = <&pcie3b_phy>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie3b_phy: phy@f10000 { + compatible = "qcom,glymur-qmp-gen5x4-pcie-phy"; + reg = <0x0 0x00f10000 0x0 0x10000>; + + clocks = <&gcc GCC_PCIE_PHY_3B_AUX_CLK>, + <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_3_CLKREF_EN>, + <&gcc GCC_PCIE_3B_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3B_PIPE_CLK>, + <&gcc GCC_PCIE_3B_PIPE_DIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_3B_PHY_BCR>, + <&gcc GCC_PCIE_3B_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_3B_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_3B_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie3b_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fd5000 { + compatible = "qcom,glymur-tcsr", + "syscon"; + reg = <0x0 0x1fd5000 0x0 0x21000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + hsc_noc: interconnect@2000000 { + compatible = "qcom,glymur-hscnoc"; + reg = <0x0 0x02000000 0x0 0x93a080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + ipcc: mailbox@3e04000 { + compatible = "qcom,glymur-ipcc", "qcom,ipcc"; + reg = <0x0 0x03e04000 0x0 0x1000>; + + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,glymur-lpass-lpiaon-noc"; + reg = <0x0 0x07400000 0x0 0x19080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + lpass_lpicx_noc: interconnect@7420000 { + compatible = "qcom,glymur-lpass-lpicx-noc"; + reg = <0x0 0x07420000 0x0 0x44080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,glymur-lpass-ag-noc"; + reg = <0x0 0x07e40000 0x0 0xe080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + usb_2_hsphy: phy@88e0000 { + compatible = "qcom,glymur-m31-eusb2-phy", + "qcom,sm8750-m31-eusb2-phy"; + + reg = <0x0 0x088e0000 0x0 0x29c>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_4_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_TERT_BCR>; + + status = "disabled"; + }; + + usb_2_qmpphy: phy@88e1000 { + compatible = "qcom,glymur-qmp-usb3-dp-phy"; + reg = <0x0 0x088e1000 0x0 0x8000>; + + clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>, + <&tcsr TCSR_USB4_2_CLKREF_EN>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe", + "clkref"; + + power-domains = <&gcc GCC_USB_2_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_TERT_BCR>, + <&gcc GCC_USB3PHY_PHY_TERT_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + mode-switch; + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_2_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_2_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_2_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_2_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp2_out>; + }; + }; + }; + }; + + usb_0: usb@a600000 { + compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr_north", + "noc_aggr_south"; + + interrupts-extended = <&intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 90 IRQ_TYPE_EDGE_BOTH>, + <&pdc 60 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + resets = <&gcc GCC_USB30_PRIM_BCR>; + + iommus = <&apps_smmu 0x1420 0x0>; + phys = <&usb_0_hsphy>, + <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,has-lpm-erratum; + tx-fifo-resize; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + usb-role-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_0_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_0_dwc3_ss: endpoint { + remote-endpoint = <&usb_0_qmpphy_usb_ss_in>; + }; + }; + }; + }; + + usb_1: usb@a800000 { + compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a800000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr_north", + "noc_aggr_south"; + + interrupts-extended = <&intc GIC_SPI 875 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 88 IRQ_TYPE_EDGE_BOTH>, + <&pdc 87 IRQ_TYPE_EDGE_BOTH>, + <&pdc 76 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + resets = <&gcc GCC_USB30_SEC_BCR>; + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + + iommus = <&apps_smmu 0x1460 0x0>; + + phys = <&usb_1_hsphy>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,has-lpm-erratum; + tx-fifo-resize; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; + }; + }; + }; + + usb_2: usb@a000000 { + compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a000000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_SLEEP_CLK>, + <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr_north", + "noc_aggr_south"; + + interrupts-extended = <&intc GIC_SPI 871 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 89 IRQ_TYPE_EDGE_BOTH>, + <&pdc 81 IRQ_TYPE_EDGE_BOTH>, + <&pdc 75 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + resets = <&gcc GCC_USB30_TERT_BCR>; + power-domains = <&gcc GCC_USB30_TERT_GDSC>; + + iommus = <&apps_smmu 0x420 0x0>; + + phys = <&usb_2_hsphy>, + <&usb_2_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,has-lpm-erratum; + tx-fifo-resize; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_2_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_2_dwc3_ss: endpoint { + remote-endpoint = <&usb_2_qmpphy_usb_ss_in>; + }; + }; + }; + }; + + usb_hs: usb@a2f8800 { + compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a200000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr_north", + "noc_aggr_south"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 92 IRQ_TYPE_EDGE_BOTH>, + <&pdc 57 IRQ_TYPE_EDGE_BOTH>, + <&intc GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "hs_phy_irq"; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + power-domains = <&gcc GCC_USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x0ce0 0x0>; + + interconnects = <&aggre3_noc MASTER_USB2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", + "apps-usb"; + + phys = <&usb_hs_phy>; + phy-names = "usb2-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,has-lpm-erratum; + tx-fifo-resize; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + dr_mode = "host"; + + maximum-speed = "high-speed"; + + status = "disabled"; + }; + + usb_mp: usb@a400000 { + compatible = "qcom,glymur-dwc3-mp", "qcom,snps-dwc3"; + reg = <0x0 0x0a400000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr_north", + "noc_aggr_south"; + + interrupts-extended = <&intc GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 11 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 13 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 78 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event_1", + "pwr_event_2", + "hs_phy_1", + "hs_phy_2", + "dp_hs_phy_1", + "dm_hs_phy_1", + "dp_hs_phy_2", + "dm_hs_phy_2", + "ss_phy_1", + "ss_phy_2"; + + resets = <&gcc GCC_USB30_MP_BCR>; + power-domains = <&gcc GCC_USB30_MP_GDSC>; + + iommus = <&apps_smmu 0xda0 0x0>; + + phys = <&usb_mp_hsphy0>, + <&usb_mp_qmpphy0>, + <&usb_mp_hsphy1>, + <&usb_mp_qmpphy1>; + phy-names = "usb2-0", + "usb3-0", + "usb2-1", + "usb3-1"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,has-lpm-erratum; + tx-fifo-resize; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + dr_mode = "host"; + + status = "disabled"; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,glymur-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + iommus = <&apps_smmu 0x1de0 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,glymur-dpu"; + reg = <0x0 0x0ae01000 0x0 0x93000>, + <0x0 0x0aeb0000 0x0 0x3000>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + + mdss_intf4_out: endpoint { + remote-endpoint = <&mdss_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + + mdss_intf5_out: endpoint { + remote-endpoint = <&mdss_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + + mdss_intf6_out: endpoint { + remote-endpoint = <&mdss_dp2_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-156000000 { + opp-hz = /bits/ 64 <156000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-205000000 { + opp-hz = /bits/ 64 <205000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-337000000 { + opp-hz = /bits/ 64 <337000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-417000000 { + opp-hz = /bits/ 64 <417000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-532000000 { + opp-hz = /bits/ 64 <532000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + + opp-660000000 { + opp-hz = /bits/ 64 <660000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-717000000 { + opp-hz = /bits/ 64 <717000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss_dp0: displayport-controller@af54000 { + compatible = "qcom,glymur-dp"; + reg = <0x0 0xaf54000 0x0 0x200>, + <0x0 0xaf54200 0x0 0x200>, + <0x0 0xaf55000 0x0 0xc00>, + <0x0 0xaf56000 0x0 0x400>, + <0x0 0xaf57000 0x0 0x400>, + <0x0 0xaf58000 0x0 0x400>, + <0x0 0xaf59000 0x0 0x400>, + <0x0 0xaf5a000 0x0 0x600>, + <0x0 0xaf5b000 0x0 0x600>; + + interrupts-extended = <&mdss 12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + remote-endpoint = <&usb_dp_qmpphy_dp_in>; + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp1: displayport-controller@af5c000 { + compatible = "qcom,glymur-dp"; + reg = <0x0 0xaf5c000 0x0 0x200>, + <0x0 0xaf5c200 0x0 0x200>, + <0x0 0xaf5d000 0x0 0xc00>, + <0x0 0xaf5e000 0x0 0x400>, + <0x0 0xaf5f000 0x0 0x400>, + <0x0 0xaf60000 0x0 0x400>, + <0x0 0xaf61000 0x0 0x400>, + <0x0 0xaf62000 0x0 0x600>, + <0x0 0xaf63000 0x0 0x600>; + + interrupts-extended = <&mdss 13>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp1_in: endpoint { + remote-endpoint = <&mdss_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp1_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; + }; + }; + + mdss_dp2: displayport-controller@af64000 { + compatible = "qcom,glymur-dp"; + reg = <0x0 0x0af64000 0x0 0x200>, + <0x0 0x0af64200 0x0 0x200>, + <0x0 0x0af65000 0x0 0xc00>, + <0x0 0x0af66000 0x0 0x400>, + <0x0 0x0af67000 0x0 0x400>, + <0x0 0x0af68000 0x0 0x400>, + <0x0 0x0af69000 0x0 0x400>, + <0x0 0x0af6a000 0x0 0x600>, + <0x0 0x0af6b000 0x0 0x600>; + + interrupts-extended = <&mdss 14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&usb_2_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_2_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp2_in: endpoint { + remote-endpoint = <&mdss_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp2_out: endpoint { + remote-endpoint = <&usb_2_qmpphy_dp_in>; + }; + }; + }; + }; + + mdss_dp3: displayport-controller@af6c000 { + compatible = "qcom,glymur-dp"; + reg = <0x0 0x0af6c000 0x0 0x200>, + <0x0 0x0af6c200 0x0 0x200>, + <0x0 0x0af6d000 0x0 0xc00>, + <0x0 0x0af6e000 0x0 0x400>, + <0x0 0x0af6f000 0x0 0x400>, + <0x0 0x0af70000 0x0 0x400>, + <0x0 0x0af71000 0x0 0x400>, + <0x0 0x0af72000 0x0 0x600>, + <0x0 0x0af73000 0x0 0x600>; + + interrupts-extended = <&mdss 15>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss_dp3_phy 0>, + <&mdss_dp3_phy 1>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dp3_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp3_in: endpoint { + remote-endpoint = <&mdss_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + }; + }; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,glymur-dispcc"; + reg = <0x0 0x0af00000 0x0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */ + <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */ + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_2_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp2 */ + <&usb_2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&mdss_dp3_phy 0>, /* dp3 */ + <&mdss_dp3_phy 1>, + <0>, /* dsi0 */ + <0>, + <0>, /* dsi1 */ + <0>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,glymur-pdc", "qcom,pdc"; + reg = <0x0 0x0b220000 0x0 0x10000>; + qcom,pdc-ranges = <0 745 51>, + <51 527 47>, + <98 609 32>, + <130 717 12>, + <142 251 5>, + <147 796 16>, + <171 4104 36>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c22c000 { + compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22c000 0x0 0x1000>, + <0x0 0x0c222000 0x0 0x1000>; + + interrupts = <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c22d000 { + compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22d000 0x0 0x1000>, + <0x0 0x0c223000 0x0 0x1000>; + + interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 862 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <9>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c22e000 { + compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22e000 0x0 0x1000>, + <0x0 0x0c224000 0x0 0x1000>; + + interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 863 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c22f000 { + compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22f000 0x0 0x1000>, + <0x0 0x0c225000 0x0 0x1000>; + + interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <8>; + + #thermal-sensor-cells = <1>; + }; + + tsens4: thermal-sensor@c230000 { + compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c230000 0x0 0x1000>, + <0x0 0x0c226000 0x0 0x1000>; + + interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + tsens5: thermal-sensor@c231000 { + compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c231000 0x0 0x1000>, + <0x0 0x0c227000 0x0 0x1000>; + + interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <8>; + + #thermal-sensor-cells = <1>; + }; + + tsens6: thermal-sensor@c232000 { + compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c232000 0x0 0x1000>, + <0x0 0x0c228000 0x0 0x1000>; + + interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 815 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + tsens7: thermal-sensor@c233000 { + compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c233000 0x0 0x1000>, + <0x0 0x0c229000 0x0 0x1000>; + + interrupts = <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <15>; + + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,glymur-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_MPROC_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_MPROC_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c30f000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0 0x0c30f000 0x0 0x400>; + }; + + arbiter@c400000 { + compatible = "qcom,glymur-spmi-pmic-arb"; + reg = <0x0 0x0c400000 0x0 0x3000>, + <0x0 0x0c900000 0x0 0x400000>, + <0x0 0x0c4c0000 0x0 0x400000>, + <0x0 0x0c403000 0x0 0x8000>; + reg-names = "core", + "chnls", + "obsrvr", + "chnl_map"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + qcom,channel = <0>; + qcom,ee = <0>; + + spmi_bus0: spmi@c426000 { + reg = <0x0 0x0c426000 0x0 0x4000>, + <0x0 0x0c8c0000 0x0 0x10000>, + <0x0 0x0c42a000 0x0 0x8000>; + reg-names = "cnfg", + "intr", + "chnl_owner"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + spmi_bus1: spmi@c437000 { + reg = <0x0 0x0c437000 0x0 0x4000>, + <0x0 0x0c8d0000 0x0 0x10000>, + <0x0 0x0c43b000 0x0 0x8000>; + reg-names = "cnfg", + "intr", + "chnl_owner"; + interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + spmi_bus2: spmi@c48000 { + reg = <0x0 0x0c448000 0x0 0x4000>, + <0x0 0x0c8e0000 0x0 0x10000>, + <0x0 0x0c44c000 0x0 0x8000>; + reg-names = "cnfg", + "intr", + "chnl_owner"; + interrupts-extended = <&pdc 72 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,glymur-tlmm"; + reg = <0x0 0x0f100000 0x0 0xf00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 249>; + wakeup-parent = <&pdc>; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio0", "gpio1"; + function = "qup0_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup0_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup0_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio12", "gpio13"; + function = "qup0_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "qup0_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "qup0_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio6", "gpio7"; + function = "qup0_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio14", "gpio15"; + function = "qup0_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + /* SDA, SCL */ + pins = "gpio56", "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + /* SDA, SCL */ + pins = "gpio54", "gpio55"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c17_data_clk: qup-i2c17-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c18_data_clk: qup-i2c18-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio73"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c19_data_clk: qup-i2c19-data-clk-state { + /* SDA, SCL */ + pins = "gpio76", "gpio77"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c20_data_clk: qup-i2c20-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c21_data_clk: qup-i2c21-data-clk-state { + /* SDA, SCL */ + pins = "gpio84", "gpio85"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c22_data_clk: qup-i2c22-data-clk-state { + /* SDA, SCL */ + pins = "gpio88", "gpio89"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c23_data_clk: qup-i2c23-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "qup2_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio3"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio7"; + function = "qup0_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio4", "gpio5", "gpio6"; + function = "qup0_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio11"; + function = "qup0_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup0_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio15"; + function = "qup0_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio12", "gpio13", "gpio14"; + function = "qup0_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio19"; + function = "qup0_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio16", "gpio17", "gpio18"; + function = "qup0_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio23"; + function = "qup0_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup0_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio5"; + function = "qup0_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio6", "gpio7", "gpio4"; + function = "qup0_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio13"; + function = "qup0_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio14", "gpio15", "gpio12"; + function = "qup0_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio35"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio39"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio43"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio51"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio53"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio54", "gpio55", "gpio52"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_cs: qup-spi16-cs-state { + pins = "gpio67"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_data_clk: qup-spi16-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio64", "gpio65", "gpio66"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_cs: qup-spi17-cs-state { + pins = "gpio71"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_data_clk: qup-spi17-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio68", "gpio69", "gpio70"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_cs: qup-spi18-cs-state { + pins = "gpio75"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_data_clk: qup-spi18-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio72", "gpio73", "gpio74"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_cs: qup-spi19-cs-state { + pins = "gpio79"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_data_clk: qup-spi19-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio76", "gpio77", "gpio78"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_cs: qup-spi20-cs-state { + pins = "gpio83"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_data_clk: qup-spi20-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio80", "gpio81", "gpio82"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_cs: qup-spi21-cs-state { + pins = "gpio87"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_data_clk: qup-spi21-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio84", "gpio85", "gpio86"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi22_cs: qup-spi22-cs-state { + pins = "gpio91"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi22_data_clk: qup-spi22-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio88", "gpio89", "gpio90"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi23_cs: qup-spi23-cs-state { + pins = "gpio83"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi23_data_clk: qup-spi23-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio80", "gpio81", "gpio82"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart2_default: qup-uart2-default-state { + tx-pins { + pins = "gpio10"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio11"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_uart14_default: qup-uart14-default-state { + cts-pins { + pins = "gpio56"; + function = "qup1_se6"; + drive-strength = <2>; + bias-disable; + }; + + rts-pins { + pins = "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio58"; + function = "qup1_se6"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_uart19_default: qup-uart19-default-state { + cts-pins { + pins = "gpio76"; + function = "qup2_se3"; + drive-strength = <2>; + bias-disable; + }; + + rts-pins { + pins = "gpio77"; + function = "qup2_se3"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio78"; + function = "qup2_se3"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio79"; + function = "qup2_se3"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_uart21_default: qup-uart21-default-state { + tx-pins { + pins = "gpio86"; + function = "qup2_se5"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio87"; + function = "qup2_se5"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_uart22_default: qup-uart22-default-state { + tx-pins { + pins = "gpio90"; + function = "qup2_se6"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio91"; + function = "qup2_se6"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,glymur-smmu-500", + "qcom,smmu-500", + "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 493 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>; + + dma-coherent; + }; + + pcie_smmu: iommu@15480000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x15480000 0x0 0x20000>; + interrupts = <GIC_SPI 964 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 962 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 960 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eventq", "cmdq-sync", "gerror"; + dma-coherent; + #iommu-cells = <1>; + }; + + intc: interrupt-controller@17000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17000000 0x0 0x10000>, + <0x0 0x17080000 0x0 0x480000>; + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <3>; + interrupt-controller; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17040000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x17040000 0x0 0x40000>; + + msi-controller; + #msi-cells = <1>; + }; + }; + + watchdog@17600000 { + compatible = "qcom,apss-wdt-glymur", "qcom,kpss-wdt"; + reg = <0x0 0x17600000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; + }; + + pdp0_mbox: mailbox@17610000 { + compatible = "qcom,glymur-cpucp-mbox", "qcom,x1e80100-cpucp-mbox"; + reg = <0x0 0x17610000 0 0x8000>, <0 0x19980000 0 0x8000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + + timer@17810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17810000 0x0 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x0 0x20000000>; + + frame@17811000 { + reg = <0x0 0x17811000 0x1000>, + <0x0 0x17812000 0x1000>; + + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <0>; + }; + + frame@17813000 { + reg = <0x0 0x17813000 0x1000>; + + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <1>; + + status = "disabled"; + }; + + frame@17815000 { + reg = <0x0 0x17815000 0x1000>; + + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <2>; + + status = "disabled"; + }; + + frame@17817000 { + reg = <0x0 0x17817000 0x1000>; + + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <3>; + + status = "disabled"; + }; + + frame@17819000 { + reg = <0x0 0x17819000 0x1000>; + + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <4>; + + status = "disabled"; + }; + + frame@1781b000 { + reg = <0x0 0x1781b000 0x1000>; + + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <5>; + + status = "disabled"; + }; + + frame@1781d000 { + reg = <0x0 0x1781d000 0x1000>; + + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <6>; + + status = "disabled"; + }; + }; + + apps_rsc: rsc@18900000 { + compatible = "qcom,rpmh-rsc"; + label = "apps_rsc"; + reg = <0x0 0x18900000 0x0 0x10000>, + <0x0 0x18910000 0x0 0x10000>, + <0x0 0x18920000 0x0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + power-domains = <&system_pd>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,glymur-rpmh-clk"; + + clocks = <&xo_board>; + clock-names = "xo"; + + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,glymur-rpmhpd"; + + operating-points-v2 = <&rpmhpd_opp_table>; + + #power-domain-cells = <1>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-48 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-336 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + nsi_noc: interconnect@1d600000 { + compatible = "qcom,glymur-nsinoc"; + reg = <0x0 0x1d600000 0x0 0x14080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + oobm_ss_noc: interconnect@1f300000 { + compatible = "qcom,glymur-oobm-ss-noc"; + reg = <0x0 0x1f300000 0x0 0x49a00>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + system-cache-controller@20400000 { + compatible = "qcom,glymur-llcc"; + reg = <0x0 0x21800000 0x0 0x100000>, + <0x0 0x21a00000 0x0 0x100000>, + <0x0 0x21c00000 0x0 0x100000>, + <0x0 0x21e00000 0x0 0x100000>, + <0x0 0x22800000 0x0 0x100000>, + <0x0 0x22a00000 0x0 0x100000>, + <0x0 0x22c00000 0x0 0x100000>, + <0x0 0x22e00000 0x0 0x100000>, + <0x0 0x23800000 0x0 0x100000>, + <0x0 0x23a00000 0x0 0x100000>, + <0x0 0x23c00000 0x0 0x100000>, + <0x0 0x23e00000 0x0 0x100000>, + <0x0 0x20400000 0x0 0x100000>, + <0x0 0x20600000 0x0 0x100000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc4_base", + "llcc5_base", + "llcc6_base", + "llcc7_base", + "llcc8_base", + "llcc9_base", + "llcc10_base", + "llcc11_base", + "llcc_broadcast_base", + "llcc_broadcast_and_base"; + + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,glymur-nsp-noc"; + reg = <0x0 0x320c0000 0x0 0x21280>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + imem: sram@81e08000 { + compatible = "mmio-sram"; + reg = <0x0 0x81e08600 0x0 0x300>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81e08600 0x300>; + + cpu_scp_lpri0: scp-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x180>; + }; + + cpu_scp_lpri1: scp-sram-section@180 { + compatible = "arm,scmi-shmem"; + reg = <0x180 0x180>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + }; + + thermal_zones: thermal-zones { + aoss-0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + aoss-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-0-0-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + cpu-0-0-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-0-1-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + cpu-0-0-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-1-0-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + cpu-0-1-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-1-1-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + cpu-0-1-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-2-0-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + cpu-0-2-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-2-1-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + cpu-0-2-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-3-0-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + cpu-0-3-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-3-1-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + cpu-0-3-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-4-0-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + cpu-0-4-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-4-1-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + cpu-0-4-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-5-0-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + cpu-0-5-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-5-1-thermal { + thermal-sensors = <&tsens0 12>; + + trips { + cpu-0-5-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss-1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + aoss-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpullc-0-0-thermal { + thermal-sensors = <&tsens1 1>; + + trips { + cpullc-0-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpullc-0-1-thermal { + thermal-sensors = <&tsens1 2>; + + trips { + cpullc-0-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + qmx-0-0-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + qmx-0-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + qmx-0-1-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + qmx-0-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + qmx-0-2-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + qmx-0-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ddr-0-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + ddr-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_video_0: video-0-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + video-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_video_1: video-1-thermal { + thermal-sensors = <&tsens1 8>; + + trips { + video-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss-2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + aoss-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-0-0-thermal { + thermal-sensors = <&tsens2 1>; + + trips { + cpu-1-0-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-0-1-thermal { + thermal-sensors = <&tsens2 2>; + + trips { + cpu-1-0-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-1-0-thermal { + thermal-sensors = <&tsens2 3>; + + trips { + cpu-1-1-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-1-1-thermal { + thermal-sensors = <&tsens2 4>; + + trips { + cpu-1-1-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-2-0-thermal { + thermal-sensors = <&tsens2 5>; + + trips { + cpu-1-2-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-2-1-thermal { + thermal-sensors = <&tsens2 6>; + + trips { + cpu-1-2-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-3-0-thermal { + thermal-sensors = <&tsens2 7>; + + trips { + cpu-1-3-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-3-1-thermal { + thermal-sensors = <&tsens2 8>; + + trips { + cpu-1-3-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-4-0-thermal { + thermal-sensors = <&tsens2 9>; + + trips { + cpu-1-4-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-4-1-thermal { + thermal-sensors = <&tsens2 10>; + + trips { + cpu-1-4-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-5-0-thermal { + thermal-sensors = <&tsens2 11>; + + trips { + cpu-1-5-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-5-1-thermal { + thermal-sensors = <&tsens2 12>; + + trips { + cpu-1-5-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss-3-thermal { + thermal-sensors = <&tsens3 0>; + + trips { + aoss-3-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpullc-1-0-thermal { + thermal-sensors = <&tsens3 1>; + + trips { + cpullc-1-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpullc-1-1-thermal { + thermal-sensors = <&tsens3 2>; + + trips { + cpullc-1-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + qmx-1-0-thermal { + thermal-sensors = <&tsens3 3>; + + trips { + qmx-1-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + qmx-1-1-thermal { + thermal-sensors = <&tsens3 4>; + + trips { + qmx-1-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + qmx-1-2-thermal { + thermal-sensors = <&tsens3 5>; + + trips { + qmx-1-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + qmx-1-3-thermal { + thermal-sensors = <&tsens3 6>; + + trips { + qmx-1-3-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + qmx-1-4-thermal { + thermal-sensors = <&tsens3 7>; + + trips { + qmx-1-4-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss-4-thermal { + thermal-sensors = <&tsens4 0>; + + trips { + aoss-4-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_0_0: cpu-2-0-0-thermal { + thermal-sensors = <&tsens4 1>; + + trips { + cpu-2-0-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_0_1: cpu-2-0-1-thermal { + thermal-sensors = <&tsens4 2>; + + trips { + cpu-2-0-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_1_0: cpu-2-1-0-thermal { + thermal-sensors = <&tsens4 3>; + + trips { + cpu-2-1-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_1_1: cpu-2-1-1-thermal { + thermal-sensors = <&tsens4 4>; + + trips { + cpu-2-1-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_2_0: cpu-2-2-0-thermal { + thermal-sensors = <&tsens4 5>; + + trips { + cpu-2-2-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_2_1: cpu-2-2-1-thermal { + thermal-sensors = <&tsens4 6>; + + trips { + cpu-2-2-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_3_0: cpu-2-3-0-thermal { + thermal-sensors = <&tsens4 7>; + + trips { + cpu-2-3-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_3_1: cpu-2-3-1-thermal { + thermal-sensors = <&tsens4 8>; + + trips { + cpu-2-3-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_4_0: cpu-2-4-0-thermal { + thermal-sensors = <&tsens4 9>; + + trips { + cpu-2-4-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_4_1: cpu-2-4-1-thermal { + thermal-sensors = <&tsens4 10>; + + trips { + cpu-2-4-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_5_0: cpu-2-5-0-thermal { + thermal-sensors = <&tsens4 11>; + + trips { + cpu-2-5-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpu_2_5_1: cpu-2-5-1-thermal { + thermal-sensors = <&tsens4 12>; + + trips { + cpu-2-5-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss-5-thermal { + thermal-sensors = <&tsens5 0>; + + trips { + aoss-5-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpullc_2_0: cpullc-2-0-thermal { + thermal-sensors = <&tsens5 1>; + + trips { + cpullc-2-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_cpuillc_2_1: cpuillc-2-1-thermal { + thermal-sensors = <&tsens5 2>; + + trips { + cpullc-2-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_qmx_2_0: qmx-2-0-thermal { + thermal-sensors = <&tsens5 3>; + + trips { + qmx-2-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_qmx_2_1: qmx-2-1-thermal { + thermal-sensors = <&tsens5 4>; + + trips { + qmx-2-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_qmx_2_2: qmx-2-2-thermal { + thermal-sensors = <&tsens5 5>; + + trips { + qmx-2-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_qmx_2_3: qmx-2-3-thermal { + thermal-sensors = <&tsens5 6>; + + trips { + qmx-2-3-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_qmx_2_4: qmx-2-4-thermal { + thermal-sensors = <&tsens5 7>; + + trips { + qmx-2-4-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_aoss_6: aoss-6-thermal { + thermal-sensors = <&tsens6 0>; + + trips { + aoss-6-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_nsphvx_0: nsphvx-0-thermal { + thermal-sensors = <&tsens6 1>; + + trips { + nsphvx-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_nsphvx_1: nsphvx-1-thermal { + thermal-sensors = <&tsens6 2>; + + trips { + nsphvx-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_nsphvx_2: nsphvx-2-thermal { + thermal-sensors = <&tsens6 3>; + + trips { + nsphvx-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_nsphvx_3: nsphvx-3-thermal { + thermal-sensors = <&tsens6 4>; + + trips { + nsphvx-3-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_nsphmx_0: nsphmx-0-thermal { + thermal-sensors = <&tsens6 5>; + + trips { + nsphmx-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_nsphmx_1: nsphmx-1-thermal { + thermal-sensors = <&tsens6 6>; + + trips { + nsphmx-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_nsphmx_2: nsphmx-2-thermal { + thermal-sensors = <&tsens6 7>; + + trips { + nsphmx-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_nsphmx_3: nsphmx-3-thermal { + thermal-sensors = <&tsens6 8>; + + trips { + nsphmx-3-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_camera_0: camera-0-thermal { + thermal-sensors = <&tsens6 9>; + + trips { + camera-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_camera_1: camera-1-thermal { + thermal-sensors = <&tsens6 10>; + + trips { + camera-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_ddr_1: ddr-1-thermal { + thermal-sensors = <&tsens6 11>; + + trips { + ddr-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_ddr_2: ddr-2-thermal { + thermal-sensors = <&tsens6 12>; + + trips { + ddr-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_aoss_7: aoss-7-thermal { + thermal-sensors = <&tsens7 0>; + + trips { + aoss-7-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_0_0: gpu-0-0-thermal { + thermal-sensors = <&tsens7 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-0-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_0_1: gpu-0-1-thermal { + thermal-sensors = <&tsens7 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-0-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_0_2: gpu-0-2-thermal { + thermal-sensors = <&tsens7 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-0-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_1_0: gpu-1-0-thermal { + thermal-sensors = <&tsens7 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-1-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_1_1: gpu-1-1-thermal { + thermal-sensors = <&tsens7 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-1-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_1_2: gpu-1-2-thermal { + thermal-sensors = <&tsens7 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-1-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_2_0: gpu-2-0-thermal { + thermal-sensors = <&tsens7 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-2-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_2_1: gpu-2-1-thermal { + thermal-sensors = <&tsens7 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-2-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_2_2: gpu-2-2-thermal { + thermal-sensors = <&tsens7 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-2-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_3_0: gpu-3-0-thermal { + thermal-sensors = <&tsens7 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-3-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_3_1: gpu-3-1-thermal { + thermal-sensors = <&tsens7 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-3-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpu_3_2: gpu-3-2-thermal { + thermal-sensors = <&tsens7 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpu-3-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpuss_0: gpuss-0-thermal { + thermal-sensors = <&tsens7 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal_gpuss_1: gpuss-1-thermal { + thermal-sensors = <&tsens7 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts index 2390648a248f..460f27dcd6f6 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts @@ -616,6 +616,38 @@ sound-dai = <&q6apm>; }; }; + + dp0-dai-link { + link-name = "DP0 Playback"; + + codec { + sound-dai = <&mdss_dp0>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + dp1-dai-link { + link-name = "DP1 Playback"; + + codec { + sound-dai = <&mdss_dp1>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_1>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; }; usb-1-ss0-sbu-mux { @@ -1102,9 +1134,7 @@ pins = "gpio10"; function = "normal"; }; -}; -&pmc8380_3_gpios { pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state { pins = "gpio8"; function = "normal"; @@ -1144,6 +1174,22 @@ status = "okay"; }; +&sdhc_2 { + cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l6b_1p8>; + + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + &smb2360_0 { status = "okay"; }; @@ -1326,6 +1372,13 @@ bias-disable; }; + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio71"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { pins = "gpio188"; function = "gpio"; @@ -1461,6 +1514,24 @@ status = "okay"; }; +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l2i_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + &usb_1_ss0_dwc3_hs { remote-endpoint = <&pmic_glink_ss0_hs_in>; }; @@ -1511,3 +1582,69 @@ &usb_mp_hsphy1 { phys = <&eusb6_repeater>; }; + +&thermal_zones { + gpuss-0-thermal { + trips { + trip-point0 { + temperature = <105000>; + }; + }; + }; + + gpuss-1-thermal { + trips { + trip-point0 { + temperature = <105000>; + }; + }; + }; + + gpuss-2-thermal { + trips { + trip-point0 { + temperature = <105000>; + }; + }; + }; + + gpuss-3-thermal { + trips { + trip-point0 { + temperature = <105000>; + }; + }; + }; + + gpuss-4-thermal { + trips { + trip-point0 { + temperature = <105000>; + }; + }; + }; + + gpuss-5-thermal { + trips { + trip-point0 { + temperature = <105000>; + }; + }; + }; + + gpuss-6-thermal { + trips { + trip-point0 { + temperature = <105000>; + }; + }; + }; + + gpuss-7-thermal { + trips { + trip-point0 { + temperature = <105000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi index b8e3e04a6fbd..9c5e77df0054 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi @@ -447,14 +447,20 @@ }; &qupv3_0 { + firmware-name = "qcom/x1e80100/qupv3fw.elf"; + status = "okay"; }; &qupv3_1 { + firmware-name = "qcom/x1e80100/qupv3fw.elf"; + status = "okay"; }; &qupv3_2 { + firmware-name = "qcom/x1e80100/qupv3fw.elf"; + status = "okay"; }; @@ -570,12 +576,10 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "otg"; usb-role-switch; + + status = "okay"; }; &usb_1_ss0_hsphy { @@ -593,12 +597,10 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "otg"; usb-role-switch; + + status = "okay"; }; &usb_1_ss1_hsphy { @@ -616,12 +618,10 @@ }; &usb_1_ss2 { - status = "okay"; -}; - -&usb_1_ss2_dwc3 { dr_mode = "otg"; usb-role-switch; + + status = "okay"; }; &usb_1_ss2_hsphy { @@ -639,11 +639,9 @@ }; &usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_2_hsphy { diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi index db65c392e618..177b06af4db6 100644 --- a/arch/arm64/boot/dts/qcom/hamoa.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi @@ -75,6 +75,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd0>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; l2_0: l2-cache { compatible = "cache"; @@ -91,6 +92,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd1>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu2: cpu@200 { @@ -101,6 +103,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd2>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu3: cpu@300 { @@ -111,6 +114,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd3>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu4: cpu@10000 { @@ -121,6 +125,7 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd4>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; l2_1: l2-cache { compatible = "cache"; @@ -137,6 +142,7 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd5>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu6: cpu@10200 { @@ -147,6 +153,7 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd6>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu7: cpu@10300 { @@ -157,6 +164,7 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd7>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu8: cpu@20000 { @@ -167,6 +175,7 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd8>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; l2_2: l2-cache { compatible = "cache"; @@ -183,6 +192,7 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd9>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu10: cpu@20200 { @@ -193,6 +203,7 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd10>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu11: cpu@20300 { @@ -203,6 +214,7 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd11>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu-map { @@ -835,9 +847,9 @@ <0>, <0>, <0>, - <0>, - <0>, - <0>; + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>; power-domains = <&rpmhpd RPMHPD_CX>; #clock-cells = <1>; @@ -3869,6 +3881,122 @@ status = "disabled"; }; + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,x1e80100-qmp-ufs-phy", + "qcom,sm8550-qmp-ufs-phy"; + reg = <0x0 0x01d80000 0x0 0x2000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_PHY_CLKREF_EN>; + + clock-names = "ref", + "ref_aux", + "qref"; + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,x1e80100-ufshc", + "qcom,sm8550-ufshc", + "qcom,ufshc"; + reg = <0x0 0x01d84000 0x0 0x3000>; + + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_LN_BB_CLK3>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + + operating-points-v2 = <&ufs_opp_table>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x1a0 0>; + dma-coherent; + + lanes-per-direction = <2>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + cryptobam: dma-controller@1dc4000 { compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0x0 0x01dc4000 0x0 0x28000>; @@ -4714,7 +4842,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&bi_tcxo_div2>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x520 0>; qcom,dll-config = <0x0007642c>; @@ -4767,7 +4895,7 @@ clocks = <&gcc GCC_SDCC4_AHB_CLK>, <&gcc GCC_SDCC4_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&bi_tcxo_div2>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x160 0>; qcom,dll-config = <0x0007642c>; @@ -4908,9 +5036,9 @@ status = "disabled"; }; - usb_1_ss2: usb@a0f8800 { - compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; - reg = <0 0x0a0f8800 0 0x400>; + usb_1_ss2: usb@a000000 { + compatible = "qcom,x1e80100-dwc3", "qcom,snps-dwc3"; + reg = <0 0x0a000000 0 0xfc100>; clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>, <&gcc GCC_USB30_TERT_MASTER_CLK>, @@ -4936,11 +5064,13 @@ assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, <&pdc 58 IRQ_TYPE_EDGE_BOTH>, <&pdc 57 IRQ_TYPE_EDGE_BOTH>, <&pdc 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event", + interrupt-names = "dwc_usb3", + "pwr_event", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -4959,61 +5089,47 @@ wakeup-source; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - usb_1_ss2_dwc3: usb@a000000 { - compatible = "snps,dwc3"; - reg = <0 0x0a000000 0 0xcd00>; - - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x14a0 0x0>; - iommus = <&apps_smmu 0x14a0 0x0>; + phys = <&usb_1_ss2_hsphy>, + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; - phys = <&usb_1_ss2_hsphy>, - <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>; - phy-names = "usb2-phy", - "usb3-phy"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,usb3_lpm_capable; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; + dma-coherent; - dma-coherent; + status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - port@0 { - reg = <0>; + port@0 { + reg = <0>; - usb_1_ss2_dwc3_hs: endpoint { - }; + usb_1_ss2_dwc3_hs: endpoint { }; + }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - usb_1_ss2_dwc3_ss: endpoint { - remote-endpoint = <&usb_1_ss2_qmpphy_usb_ss_in>; - }; + usb_1_ss2_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_usb_ss_in>; }; }; }; }; - usb_2: usb@a2f8800 { - compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; - reg = <0 0x0a2f8800 0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_2: usb@a200000 { + compatible = "qcom,x1e80100-dwc3", "qcom,snps-dwc3"; + reg = <0 0x0a200000 0 0xfc100>; clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, <&gcc GCC_USB20_MASTER_CLK>, @@ -5038,10 +5154,12 @@ <&gcc GCC_USB20_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, <&pdc 50 IRQ_TYPE_EDGE_BOTH>, <&pdc 49 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "pwr_event", + interrupt-names = "dwc_usb3", + "pwr_event", "dp_hs_phy_irq", "dm_hs_phy_irq"; @@ -5060,31 +5178,26 @@ qcom,select-utmi-as-pipe-clk; wakeup-source; - status = "disabled"; + iommus = <&apps_smmu 0x14e0 0x0>; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; - usb_2_dwc3: usb@a200000 { - compatible = "snps,dwc3"; - reg = <0 0x0a200000 0 0xcd00>; - interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x14e0 0x0>; - phys = <&usb_2_hsphy>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; + dma-coherent; - dma-coherent; + status = "disabled"; - port { - usb_2_dwc3_hs: endpoint { - }; + port { + usb_2_dwc3_hs: endpoint { }; }; }; - usb_mp: usb@a4f8800 { - compatible = "qcom,x1e80100-dwc3-mp", "qcom,dwc3"; - reg = <0 0x0a4f8800 0 0x400>; + usb_mp: usb@a400000 { + compatible = "qcom,x1e80100-dwc3-mp", "qcom,snps-dwc3"; + reg = <0 0x0a400000 0 0xfc100>; clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, <&gcc GCC_USB30_MP_MASTER_CLK>, @@ -5110,7 +5223,8 @@ assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, @@ -5120,7 +5234,8 @@ <&pdc 53 IRQ_TYPE_EDGE_BOTH>, <&pdc 55 IRQ_TYPE_LEVEL_HIGH>, <&pdc 56 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event_1", "pwr_event_2", + interrupt-names = "dwc_usb3", + "pwr_event_1", "pwr_event_2", "hs_phy_1", "hs_phy_2", "dp_hs_phy_1", "dm_hs_phy_1", "dp_hs_phy_2", "dm_hs_phy_2", @@ -5140,39 +5255,28 @@ wakeup-source; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - usb_mp_dwc3: usb@a400000 { - compatible = "snps,dwc3"; - reg = <0 0x0a400000 0 0xcd00>; + iommus = <&apps_smmu 0x1400 0x0>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>, + <&usb_mp_hsphy1>, <&usb_mp_qmpphy1>; + phy-names = "usb2-0", "usb3-0", + "usb2-1", "usb3-1"; + dr_mode = "host"; - iommus = <&apps_smmu 0x1400 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; - phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>, - <&usb_mp_hsphy1>, <&usb_mp_qmpphy1>; - phy-names = "usb2-0", "usb3-0", - "usb2-1", "usb3-1"; - dr_mode = "host"; - - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,usb3_lpm_capable; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; + dma-coherent; - dma-coherent; - }; + status = "disabled"; }; - usb_1_ss0: usb@a6f8800 { - compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; - reg = <0 0x0a6f8800 0 0x400>; + usb_1_ss0: usb@a600000 { + compatible = "qcom,x1e80100-dwc3", "qcom,snps-dwc3"; + reg = <0 0x0a600000 0 0xfc100>; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, @@ -5198,11 +5302,13 @@ assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, <&pdc 61 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event", + interrupt-names = "dwc_usb3", + "pwr_event", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -5214,58 +5320,47 @@ wakeup-source; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; + iommus = <&apps_smmu 0x1420 0x0>; - usb_1_ss0_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0 0x0a600000 0 0xcd00>; + phys = <&usb_1_ss0_hsphy>, + <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; - iommus = <&apps_smmu 0x1420 0x0>; - - phys = <&usb_1_ss0_hsphy>, - <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>; - phy-names = "usb2-phy", - "usb3-phy"; - - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,usb3_lpm_capable; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; + dma-coherent; - dma-coherent; + status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - port@0 { - reg = <0>; + port@0 { + reg = <0>; - usb_1_ss0_dwc3_hs: endpoint { - }; + usb_1_ss0_dwc3_hs: endpoint { }; + }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - usb_1_ss0_dwc3_ss: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_usb_ss_in>; - }; + usb_1_ss0_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_usb_ss_in>; }; }; }; }; - usb_1_ss1: usb@a8f8800 { - compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; - reg = <0 0x0a8f8800 0 0x400>; + usb_1_ss1: usb@a800000 { + compatible = "qcom,x1e80100-dwc3", "qcom,snps-dwc3"; + reg = <0 0x0a800000 0 0xfc100>; clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, @@ -5291,11 +5386,13 @@ assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, <&pdc 60 IRQ_TYPE_EDGE_BOTH>, <&pdc 11 IRQ_TYPE_EDGE_BOTH>, <&pdc 47 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event", + interrupt-names = "dwc_usb3", + "pwr_event", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -5314,50 +5411,39 @@ wakeup-source; - #address-cells = <2>; - #size-cells = <2>; - ranges; + iommus = <&apps_smmu 0x1460 0x0>; - status = "disabled"; - - usb_1_ss1_dwc3: usb@a800000 { - compatible = "snps,dwc3"; - reg = <0 0x0a800000 0 0xcd00>; - - interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_1_ss1_hsphy>, + <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; - iommus = <&apps_smmu 0x1460 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; - phys = <&usb_1_ss1_hsphy>, - <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>; - phy-names = "usb2-phy", - "usb3-phy"; - - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,usb3_lpm_capable; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; + dma-coherent; - dma-coherent; + status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - port@0 { - reg = <0>; + port@0 { + reg = <0>; - usb_1_ss1_dwc3_hs: endpoint { - }; + usb_1_ss1_dwc3_hs: endpoint { }; + }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - usb_1_ss1_dwc3_ss: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_usb_ss_in>; - }; + usb_1_ss1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_usb_ss_in>; }; }; }; @@ -5432,19 +5518,19 @@ opp-366000000 { opp-hz = /bits/ 64 <366000000>; - required-opps = <&rpmhpd_opp_svs_l1>, + required-opps = <&rpmhpd_opp_svs>, <&rpmhpd_opp_svs_l1>; }; opp-444000000 { opp-hz = /bits/ 64 <444000000>; - required-opps = <&rpmhpd_opp_nom>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_nom>; }; opp-481000000 { opp-hz = /bits/ 64 <481000000>; - required-opps = <&rpmhpd_opp_turbo>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_turbo>; }; }; @@ -5658,8 +5744,8 @@ mdss_dp0_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5747,8 +5833,8 @@ mdss_dp1_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5835,8 +5921,8 @@ mdss_dp2_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5918,8 +6004,8 @@ mdss_dp3_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -9230,7 +9316,7 @@ }; }; - cpu2-0-top-thermal { + thermal_cpu2_0_top: cpu2-0-top-thermal { thermal-sensors = <&tsens2 1>; trips { @@ -9242,7 +9328,7 @@ }; }; - cpu2-0-btm-thermal { + thermal_cpu2_0_btm: cpu2-0-btm-thermal { thermal-sensors = <&tsens2 2>; trips { @@ -9254,7 +9340,7 @@ }; }; - cpu2-1-top-thermal { + thermal_cpu2_1_top: cpu2-1-top-thermal { thermal-sensors = <&tsens2 3>; trips { @@ -9266,7 +9352,7 @@ }; }; - cpu2-1-btm-thermal { + thermal_cpu2_1_btm: cpu2-1-btm-thermal { thermal-sensors = <&tsens2 4>; trips { @@ -9278,7 +9364,7 @@ }; }; - cpu2-2-top-thermal { + thermal_cpu2_2_top: cpu2-2-top-thermal { thermal-sensors = <&tsens2 5>; trips { @@ -9290,7 +9376,7 @@ }; }; - cpu2-2-btm-thermal { + thermal_cpu2_2_btm: cpu2-2-btm-thermal { thermal-sensors = <&tsens2 6>; trips { @@ -9302,7 +9388,7 @@ }; }; - cpu2-3-top-thermal { + thermal_cpu2_3_top: cpu2-3-top-thermal { thermal-sensors = <&tsens2 7>; trips { @@ -9314,7 +9400,7 @@ }; }; - cpu2-3-btm-thermal { + thermal_cpu2_3_btm: cpu2-3-btm-thermal { thermal-sensors = <&tsens2 8>; trips { @@ -9326,7 +9412,7 @@ }; }; - cpuss2-top-thermal { + thermal_cpuss2_top: cpuss2-top-thermal { thermal-sensors = <&tsens2 9>; trips { @@ -9338,7 +9424,7 @@ }; }; - cpuss2-btm-thermal { + thermal_cpuss2_btm: cpuss2-btm-thermal { thermal-sensors = <&tsens2 10>; trips { @@ -9350,7 +9436,7 @@ }; }; - aoss3-thermal { + thermal_aoss3: aoss3-thermal { thermal-sensors = <&tsens3 0>; trips { @@ -9368,7 +9454,7 @@ }; }; - nsp0-thermal { + thermal_nsp0: nsp0-thermal { thermal-sensors = <&tsens3 1>; trips { @@ -9386,7 +9472,7 @@ }; }; - nsp1-thermal { + thermal_nsp1: nsp1-thermal { thermal-sensors = <&tsens3 2>; trips { @@ -9404,7 +9490,7 @@ }; }; - nsp2-thermal { + thermal_nsp2: nsp2-thermal { thermal-sensors = <&tsens3 3>; trips { @@ -9422,7 +9508,7 @@ }; }; - nsp3-thermal { + thermal_nsp3: nsp3-thermal { thermal-sensors = <&tsens3 4>; trips { @@ -9440,7 +9526,7 @@ }; }; - gpuss-0-thermal { + thermal_gpuss_0: gpuss-0-thermal { polling-delay-passive = <200>; thermal-sensors = <&tsens3 5>; @@ -9467,7 +9553,7 @@ }; }; - gpuss-1-thermal { + thermal_gpuss_1: gpuss-1-thermal { polling-delay-passive = <200>; thermal-sensors = <&tsens3 6>; @@ -9494,7 +9580,7 @@ }; }; - gpuss-2-thermal { + thermal_gpuss_2: gpuss-2-thermal { polling-delay-passive = <200>; thermal-sensors = <&tsens3 7>; @@ -9521,7 +9607,7 @@ }; }; - gpuss-3-thermal { + thermal_gpuss_3: gpuss-3-thermal { polling-delay-passive = <200>; thermal-sensors = <&tsens3 8>; @@ -9548,7 +9634,7 @@ }; }; - gpuss-4-thermal { + thermal_gpuss_4: gpuss-4-thermal { polling-delay-passive = <200>; thermal-sensors = <&tsens3 9>; @@ -9575,7 +9661,7 @@ }; }; - gpuss-5-thermal { + thermal_gpuss_5: gpuss-5-thermal { polling-delay-passive = <200>; thermal-sensors = <&tsens3 10>; @@ -9602,7 +9688,7 @@ }; }; - gpuss-6-thermal { + thermal_gpuss_6: gpuss-6-thermal { polling-delay-passive = <200>; thermal-sensors = <&tsens3 11>; @@ -9629,7 +9715,7 @@ }; }; - gpuss-7-thermal { + thermal_gpuss_7: gpuss-7-thermal { polling-delay-passive = <200>; thermal-sensors = <&tsens3 12>; @@ -9656,7 +9742,7 @@ }; }; - camera0-thermal { + thermal_camera0: camera0-thermal { thermal-sensors = <&tsens3 13>; trips { @@ -9674,7 +9760,7 @@ }; }; - camera1-thermal { + thermal_camera1: camera1-thermal { thermal-sensors = <&tsens3 14>; trips { diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts new file mode 100644 index 000000000000..941f866ecfe9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include "ipq5210.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5210 RDP504"; + compatible = "qcom,ipq5210-rdp504", "qcom,ipq5210"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&sdhc { + max-frequency = <192000000>; + bus-width = <4>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + pinctrl-0 = <&sdhc_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + qup_uart1_default_state: qup-uart1-default-state { + pins = "gpio38", "gpio39"; + function = "qup_se1"; + drive-strength = <6>; + bias-pull-down; + }; + + sdhc_default_state: sdhc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; + +&uart1 { + pinctrl-0 = <&qup_uart1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5210.dtsi b/arch/arm64/boot/dts/qcom/ipq5210.dtsi new file mode 100644 index 000000000000..3761eb03ab24 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5210.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,ipq5210-gcc.h> +#include <dt-bindings/reset/qcom,ipq5210-gcc.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + }; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + scm { + compatible = "qcom,scm-ipq5210", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bootloader@87800000 { + reg = <0x0 0x87800000 0x0 0x400000>; + no-map; + }; + + smem@87c00000 { + compatible = "qcom,smem"; + reg = <0x0 0x87c00000 0x0 0x40000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + }; + + tfa@87d00000 { + reg = <0x0 0x87d00000 0x0 0x80000>; + no-map; + }; + + optee@87d80000 { + reg = <0x0 0x87d80000 0x0 0x280000>; + no-map; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0 0 0 0 0x10 0>; + ranges = <0 0 0 0 0x10 0>; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5210-tlmm"; + reg = <0x0 0x01000000 0x0 0x300000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 54>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq5210-gcc"; + reg = <0x0 0x01800000 0x0 0x40000>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01905000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + qupv3: geniqup@1ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x01ac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>, + <&gcc GCC_QUPV3_AHB_SLV_CLK>; + clock-names = "m-ahb", "s-ahb"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + uart1: serial@1a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x01a84000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP_SE1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + }; + + sdhc: mmc@7804000 { + compatible = "qcom,ipq5210-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x07804000 0x0 0x1000>, + <0x0 0x07805000 0x0 0x1000>; + reg-names = "hc", + "cqhci"; + + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", + "core", + "xo"; + non-removable; + + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0xb000000 0x0 0x1000>, + <0x0 0xb002000 0x0 0x1000>, + <0x0 0xb001000 0x0 0x1000>, + <0x0 0xb004000 0x0 0x1000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0x0b00c000 0 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0x0 0x0 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0x00001000 0x0 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0x00002000 0x0 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0b120000 0x0 0x1000>; + ranges = <0 0 0 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@b121000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b123000 0x1000>; + + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b124000 0x1000>; + + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b125000 0x1000>; + + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b126000 0x1000>; + + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b127000 0x1000>; + + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b128000 0x1000>; + + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi index b37ae7749083..8967861be5fd 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi @@ -78,4 +78,48 @@ drive-strength = <8>; bias-pull-down; }; + + qpic_snand_default_state: qpic-snand-default-state { + clock-pins { + pins = "gpio13"; + function = "qspi_clk"; + drive-strength = <8>; + bias-disable; + }; + + cs-pins { + pins = "gpio12"; + function = "qspi_cs"; + drive-strength = <8>; + bias-disable; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qspi_data"; + drive-strength = <8>; + bias-disable; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + pinctrl-0 = <&qpic_snand_default_state>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-engine = <&qpic_nand>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts index ed8a54eb95c0..6e2abde9ed89 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts @@ -35,17 +35,6 @@ }; }; -&sdhc { - bus-width = <4>; - max-frequency = <192000000>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - non-removable; - pinctrl-0 = <&sdc_default_state>; - pinctrl-names = "default"; - status = "okay"; -}; - &tlmm { i2c_1_pins: i2c-1-state { pins = "gpio29", "gpio30"; @@ -54,29 +43,6 @@ bias-pull-up; }; - sdc_default_state: sdc-default-state { - clk-pins { - pins = "gpio13"; - function = "sdc_clk"; - drive-strength = <8>; - bias-disable; - }; - - cmd-pins { - pins = "gpio12"; - function = "sdc_cmd"; - drive-strength = <8>; - bias-pull-up; - }; - - data-pins { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "sdc_data"; - drive-strength = <8>; - bias-pull-up; - }; - }; - spi_0_data_clk_pins: spi-0-data-clk-state { pins = "gpio14", "gpio15", "gpio16"; function = "blsp0_spi"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 45fc512a3bab..e227730d99a6 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -423,6 +423,39 @@ status = "disabled"; }; + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x07984000 0x1c000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: spi@79b0000 { + compatible = "qcom,ipq5332-snand", "qcom,ipq9574-snand"; + reg = <0x079b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>, + <&gcc GCC_QPIC_IO_MACRO_CLK>; + clock-names = "core", + "aon", + "iom"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", + "rx", + "cmd"; + + status = "disabled"; + }; + usb: usb@8af8800 { compatible = "qcom,ipq5332-dwc3", "qcom,dwc3"; reg = <0x08af8800 0x400>; diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts index 738618551203..de71b72ae6dc 100644 --- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts +++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts @@ -124,13 +124,6 @@ status = "okay"; }; -&sdhc { - pinctrl-0 = <&sdc_default_state>; - pinctrl-names = "default"; - - status = "okay"; -}; - &sleep_clk { clock-frequency = <32000>; }; @@ -201,26 +194,26 @@ }; }; - sdc_default_state: sdc-default-state { - clk-pins { + qpic_snand_default_state: qpic-snand-default-state { + clock-pins { pins = "gpio5"; - function = "sdc_clk"; + function = "qspi_clk"; drive-strength = <8>; - bias-disable; + bias-pull-down; }; - cmd-pins { + cs-pins { pins = "gpio4"; - function = "sdc_cmd"; + function = "qspi_cs"; drive-strength = <8>; bias-pull-up; }; data-pins { pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "sdc_data"; + function = "qspi_data"; drive-strength = <8>; - bias-pull-up; + bias-pull-down; }; }; @@ -246,6 +239,27 @@ }; }; +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + pinctrl-0 = <&qpic_snand_default_state>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-engine = <&qpic_nand>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + }; +}; + &uart0 { pinctrl-0 = <&uart0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi index eb393f3fd728..f20cda429094 100644 --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi @@ -572,6 +572,39 @@ status = "disabled"; }; + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x07984000 0x0 0x1c000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: spi@79b0000 { + compatible = "qcom,ipq5424-snand", "qcom,ipq9574-snand"; + reg = <0x0 0x079b0000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>, + <&gcc GCC_QPIC_IO_MACRO_CLK>; + clock-names = "core", + "aon", + "iom"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", + "rx", + "cmd"; + + status = "disabled"; + }; + intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; reg = <0 0xf200000 0 0x10000>, /* GICD */ diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi index bdb396afb992..62877b46f9b3 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi @@ -22,6 +22,15 @@ stdout-path = "serial0:115200n8"; }; + regulator_fixed_1p8: s1800 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "fixed_1p8"; + }; + regulator_fixed_3p3: s3300 { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; @@ -88,11 +97,27 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&mp5496_s1>; +}; + +&cpu1 { + cpu-supply = <&mp5496_s1>; +}; + +&cpu2 { + cpu-supply = <&mp5496_s1>; +}; + +&cpu3 { + cpu-supply = <&mp5496_s1>; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-mp5496-regulators"; - ipq9574_s1: s1 { + mp5496_s1: s1 { /* * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. * During regulator registration, kernel not knowing the initial voltage, @@ -121,6 +146,11 @@ }; }; +&sdhc_1 { + vmmc-supply = <®ulator_fixed_3p3>; + vqmmc-supply = <®ulator_fixed_1p8>; +}; + &sleep_clk { clock-frequency = <32000>; }; @@ -169,6 +199,38 @@ bias-disable; }; }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; }; &qpic_bam { @@ -179,8 +241,6 @@ pinctrl-0 = <&qpic_snand_default_state>; pinctrl-names = "default"; - status = "okay"; - flash@0 { compatible = "spi-nand"; reg = <0>; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418-emmc.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418-emmc.dts new file mode 100644 index 000000000000..2cf35c717411 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418-emmc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause-Clear +/* + * IPQ9574 RDP418 (eMMC variant) board device tree source + * + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include "ipq9574-rdp-common.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2 (eMMC)"; + compatible = "qcom,ipq9574-ap-al02-c2-emmc", "qcom,ipq9574"; + +}; + +&sdhc_1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts index f4f9199d4ab1..23d4cba7c6b6 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts @@ -16,48 +16,6 @@ }; -&sdhc_1 { - pinctrl-0 = <&sdc_default_state>; - pinctrl-names = "default"; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - max-frequency = <384000000>; - bus-width = <8>; +&qpic_nand { status = "okay"; }; - -&tlmm { - sdc_default_state: sdc-default-state { - clk-pins { - pins = "gpio5"; - function = "sdc_clk"; - drive-strength = <8>; - bias-disable; - }; - - cmd-pins { - pins = "gpio4"; - function = "sdc_cmd"; - drive-strength = <8>; - bias-pull-up; - }; - - data-pins { - pins = "gpio0", "gpio1", "gpio2", - "gpio3", "gpio6", "gpio7", - "gpio8", "gpio9"; - function = "sdc_data"; - drive-strength = <8>; - bias-pull-up; - }; - - rclk-pins { - pins = "gpio10"; - function = "sdc_rclk"; - drive-strength = <8>; - bias-pull-down; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp433-common.dtsi new file mode 100644 index 000000000000..3422058ac480 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433-common.dtsi @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ9574 RDP433 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +&pcie1_phy { + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pcie1_default>; + pinctrl-names = "default"; + + perst-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie2_phy { + status = "okay"; +}; + +&pcie2 { + pinctrl-0 = <&pcie2_default>; + pinctrl-names = "default"; + + perst-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie3_phy { + status = "okay"; +}; + +&pcie3 { + pinctrl-0 = <&pcie3_default>; + pinctrl-names = "default"; + + perst-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&tlmm { + + pcie1_default: pcie1-default-state { + clkreq-n-pins { + pins = "gpio25"; + function = "pcie1_clk"; + drive-strength = <6>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + output-low; + }; + + wake-n-pins { + pins = "gpio27"; + function = "pcie1_wake"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + pcie2_default: pcie2-default-state { + clkreq-n-pins { + pins = "gpio28"; + function = "pcie2_clk"; + drive-strength = <6>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio29"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + output-low; + }; + + wake-n-pins { + pins = "gpio30"; + function = "pcie2_wake"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + pcie3_default: pcie3-default-state { + clkreq-n-pins { + pins = "gpio31"; + function = "pcie3_clk"; + drive-strength = <6>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio32"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-low; + }; + + wake-n-pins { + pins = "gpio33"; + function = "pcie3_wake"; + drive-strength = <6>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433-emmc.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433-emmc.dts new file mode 100644 index 000000000000..44884231499f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433-emmc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause-Clear +/* + * IPQ9574 RDP433 (eMMC variant) board device tree source + * + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include "ipq9574-rdp-common.dtsi" +#include "ipq9574-rdp433-common.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7 (eMMC)"; + compatible = "qcom,ipq9574-ap-al02-c7-emmc", "qcom,ipq9574"; +}; + +&sdhc_1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 5a546a14998b..88439697c074 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -8,124 +8,14 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include "ipq9574-rdp-common.dtsi" +#include "ipq9574-rdp433-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; }; -&pcie1_phy { +&qpic_nand { status = "okay"; }; - -&pcie1 { - pinctrl-0 = <&pcie1_default>; - pinctrl-names = "default"; - - perst-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pcie2_phy { - status = "okay"; -}; - -&pcie2 { - pinctrl-0 = <&pcie2_default>; - pinctrl-names = "default"; - - perst-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pcie3_phy { - status = "okay"; -}; - -&pcie3 { - pinctrl-0 = <&pcie3_default>; - pinctrl-names = "default"; - - perst-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&tlmm { - - pcie1_default: pcie1-default-state { - clkreq-n-pins { - pins = "gpio25"; - function = "pcie1_clk"; - drive-strength = <6>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio26"; - function = "gpio"; - drive-strength = <8>; - bias-pull-down; - output-low; - }; - - wake-n-pins { - pins = "gpio27"; - function = "pcie1_wake"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - pcie2_default: pcie2-default-state { - clkreq-n-pins { - pins = "gpio28"; - function = "pcie2_clk"; - drive-strength = <6>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio29"; - function = "gpio"; - drive-strength = <8>; - bias-pull-down; - output-low; - }; - - wake-n-pins { - pins = "gpio30"; - function = "pcie2_wake"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - pcie3_default: pcie3-default-state { - clkreq-n-pins { - pins = "gpio31"; - function = "pcie3_clk"; - drive-strength = <6>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio32"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - output-low; - }; - - wake-n-pins { - pins = "gpio33"; - function = "pcie3_wake"; - drive-strength = <6>; - bias-pull-up; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts index d36d1078763e..cbc9047cfe92 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts @@ -15,3 +15,7 @@ compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574"; }; + +&qpic_nand { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts index c30c9fbedf26..d233ec530cc3 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts @@ -15,3 +15,7 @@ compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; }; + +&qpic_nand { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts index 0dc382f5d5ec..f2334b9e0ed4 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts @@ -14,3 +14,7 @@ model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9"; compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574"; }; + +&qpic_nand { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index d7278f2137ac..622cfa96ed2b 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -56,7 +56,6 @@ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; - cpu-supply = <&ipq9574_s1>; #cooling-cells = <2>; }; @@ -69,7 +68,6 @@ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; - cpu-supply = <&ipq9574_s1>; #cooling-cells = <2>; }; @@ -82,7 +80,6 @@ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; - cpu-supply = <&ipq9574_s1>; #cooling-cells = <2>; }; @@ -95,7 +92,6 @@ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; - cpu-supply = <&ipq9574_s1>; #cooling-cells = <2>; }; @@ -467,6 +463,15 @@ clock-names = "iface", "core", "xo", "ice"; non-removable; supports-cqe; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts index 32a082598434..07247dc98b70 100644 --- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts +++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts @@ -5,9 +5,21 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "kaanapali.dtsi" +#include "pm8010-kaanapali.dtsi" /* SPMI1: SID-12/13 */ +#include "pmd8028-kaanapali.dtsi" /* SPMI1: SID-4 */ +#include "pmh0101.dtsi" /* SPMI0: SID-1 */ +#include "pmh0104-kaanapali.dtsi" /* SPMI1: SID-9 */ +#include "pmh0110-kaanapali.dtsi" /* SPMI0: SID-3/5/6/8 */ +#include "pmih0108-kaanapali.dtsi" /* SPMI1: SID-7 */ +#include "pmk8850.dtsi" /* SPMI0: SID-0 */ +#include "pmr735d-kaanapali.dtsi" /* SPMI1: SID-10 */ + / { model = "Qualcomm Technologies, Inc. Kaanapali MTP"; compatible = "qcom,kaanapali-mtp", "qcom,kaanapali"; @@ -15,6 +27,7 @@ aliases { serial0 = &uart7; + serial1 = &uart18; }; chosen { @@ -52,6 +65,193 @@ clock-div = <2>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&key_vol_up_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + sound { + compatible = "qcom,kaanapali-sndcard", "qcom,sm8450-sndcard"; + model = "Kaanapali-MTP"; + + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, + <&lpass_wsamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 + 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + vdd-px-supply = <&vreg_l1g_1p2>; + + #sound-dai-cells = <1>; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-0 = <&bt_default>, <&sw_ctrl_default>, <&wlan_en>; + pinctrl-names = "default"; + + bt-enable-gpios = <&pmh0104_j_e1_gpios 5 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_s2j_0p8>; + vddio-supply = <&vreg_l2g_1p8>; + vddio1p2-supply = <&vreg_l3g_1p2>; + vddaon-supply = <&vreg_s7g_0p9>; + vdddig-supply = <&vreg_s1j_0p8>; + vddrfa1p2-supply = <&vreg_s7f_1p2>; + vddrfa1p8-supply = <&vreg_s8f_1p8>; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -175,7 +375,7 @@ vreg_l12b_1p8: ldo12 { regulator-name = "vreg_l12b_1p8"; - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; regulator-allow-set-load; @@ -665,6 +865,59 @@ }; }; +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l10b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l1d_1p2>; + status = "okay"; + + panel@0 { + compatible = "novatek,nt37801"; + reg = <0>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active &sde_esync0_suspend + &sde_mdp_vsync_p_1p2_active &sde_mdp_vsync_p_1p8_active + &sde_disp0_rst_1p2_active &sde_disp0_rst_1p8_active>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend &sde_esync0_suspend + &sde_mdp_vsync_p_1p2_active &sde_mdp_vsync_p_1p8_active + &sde_disp0_rst_1p2_active &sde_disp0_rst_1p8_active>; + pinctrl-names = "default", "sleep"; + + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p0>; + vddio-supply = <&vreg_l12b_1p8>; + + reset-gpios = <&tlmm 98 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l3d_0p8>; + + status = "okay"; +}; + &pcie0 { pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; @@ -682,6 +935,140 @@ &pcie_port0 { wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; + + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pmh0101_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + function-enumerator = <0>; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + function-enumerator = <1>; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pmh0101_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pmh0104_j_e1_gpios { + bt_default: bt-default-state { + pins = "gpio5"; + function = "normal"; + input-disable; + output-enable; + output-low; + bias-disable; + power-source = <1>; + }; +}; + +&pmh0110_d_e0_gpios { + sde_mdp_vsync_p_1p2_active: sde-mdp-vsync-p-1p2-active-state { + pins = "gpio9"; + function = "paired"; + input-disable; + output-enable; + power-source = <2>; /* 1.2v */ + }; + + sde_mdp_vsync_p_1p8_active: sde-mdp-vsync-p-1p8-active-state { + pins = "gpio10"; + function = "paired"; + input-enable; + output-disable; + power-source = <1>; /* 1.8v */ + }; +}; + +&pmh0110_f_e0_gpios { + sde_disp0_rst_1p2_active: sde-disp0-rst-1p2-active-state { + pins = "gpio9"; + function = "paired"; + input-enable; + output-disable; + power-source = <2>; /* 1.2v */ + }; + + sde_disp0_rst_1p8_active: sde-disp0-rst-1p8-active-state { + pins = "gpio10"; + function = "paired"; + input-disable; + output-enable; + power-source = <1>; /* 1.8v */ + }; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/kaanapali/adsp.mbn", + "qcom/kaanapali/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/kaanapali/cdsp.mbn", + "qcom/kaanapali/cdsp_dtb.mbn"; + + status = "okay"; }; &sdhc_2 { @@ -701,12 +1088,169 @@ status = "okay"; }; +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_0_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 76 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l2i_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l2i_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { gpio-reserved-ranges = <36 4>, /* NFC eSE SPI */ <74 1>, /* eSE */ <119 2>, /* SoCCP */ <144 4>; /* CXM UART */ + wlan_en: wlan-en-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio18"; + function = "gpio"; + bias-pull-down; + }; + + spkr_0_sd_n_active: spkr-0-sd-n-active-state { + pins = "gpio76"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sde_te_active: sde-te-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_suspend: sde-te-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_esync0_suspend: sde-esync0-suspend-state { + pins = "gpio88"; + function = "mdp_esync0_out"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_suspend: sde-dsi-suspend-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + key_vol_up_default: key-vol-up-default-state { + pins = "gpio101"; + function = "gpio"; + output-disable; + bias-pull-up; + }; + pcie0_default_state: pcie0-default-state { perst-n-pins { pins = "gpio102"; @@ -729,12 +1273,37 @@ bias-pull-up; }; }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio161"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; }; &uart7 { status = "okay"; }; +&uart18 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + + max-speed = <3200000>; + }; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 217 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts index 66b423a497b3..da0e8f9091c3 100644 --- a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts +++ b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts @@ -5,9 +5,21 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "kaanapali.dtsi" +#include "pm8010-kaanapali.dtsi" /* SPMI1: SID-12/13 */ +#include "pmd8028-kaanapali.dtsi" /* SPMI1: SID-4 */ +#include "pmh0101.dtsi" /* SPMI0: SID-1 */ +#include "pmh0104-kaanapali.dtsi" /* SPMI1: SID-9 */ +#include "pmh0110-kaanapali.dtsi" /* SPMI0: SID-3/5/6/8 */ +#include "pmih0108-kaanapali.dtsi" /* SPMI1: SID-7 */ +#include "pmk8850.dtsi" /* SPMI0: SID-0 */ +#include "pmr735d-kaanapali.dtsi" /* SPMI1: SID-10 */ + / { model = "Qualcomm Technologies, Inc. Kaanapali QRD"; compatible = "qcom,kaanapali-qrd", "qcom,kaanapali"; @@ -52,6 +64,22 @@ clock-div = <2>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&key_vol_up_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; }; &apps_rsc { @@ -665,6 +693,63 @@ }; }; +&pmh0101_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + function-enumerator = <0>; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + function-enumerator = <1>; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pmh0101_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + &sdhc_2 { cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; @@ -682,11 +767,32 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/kaanapali/adsp.mbn", + "qcom/kaanapali/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/kaanapali/cdsp.mbn", + "qcom/kaanapali/cdsp_dtb.mbn"; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <36 4>, /* NFC eSE SPI */ <74 1>, /* eSE */ <119 2>, /* SoCCP */ <144 4>; /* CXM UART */ + + key_vol_up_default: key-vol-up-default-state { + pins = "gpio101"; + function = "gpio"; + output-disable; + bias-pull-up; + }; }; &uart7 { diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi index 9ef57ad0ca71..7cc326aa1a1a 100644 --- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi +++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi @@ -3,9 +3,17 @@ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> +#include <dt-bindings/clock/qcom,kaanapali-cambistmclkcc.h> +#include <dt-bindings/clock/qcom,kaanapali-camcc.h> +#include <dt-bindings/clock/qcom,kaanapali-dispcc.h> #include <dt-bindings/clock/qcom,kaanapali-gcc.h> +#include <dt-bindings/clock/qcom,kaanapali-gpucc.h> +#include <dt-bindings/clock/qcom,kaanapali-gxclkctl.h> +#include <dt-bindings/clock/qcom,kaanapali-videocc.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8750-tcsr.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,icc.h> @@ -15,7 +23,9 @@ #include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include "kaanapali-ipcc.h" @@ -442,6 +452,58 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_MPROC_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_MPROC_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_MPROC_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_MPROC_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; @@ -468,6 +530,508 @@ #power-domain-cells = <1>; }; + gpi_dma2: dma-controller@800000 { + compatible = "qcom,kaanapali-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00800000 0x0 0x60000>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 851 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x1f>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x436 0x0>; + dma-coherent; + }; + + qupv3_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x423 0x0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c8: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00880000 0x0 0x4000>; + + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi8: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00880000 0x0 0x4000>; + + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c9: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00884000 0x0 0x4000>; + + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi9: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00884000 0x0 0x4000>; + + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c10: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00888000 0x0 0x4000>; + + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi10: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c11: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0088c000 0x0 0x4000>; + + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi11: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0088c000 0x0 0x4000>; + + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c12: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + i2c_master_hub: geniqup@9c0000 { + compatible = "qcom,geni-se-i2c-master-hub"; + reg = <0x0 0x009c0000 0x0 0x2000>; + + clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>; + clock-names = "s-ahb"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c_hub_0: i2c@980000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00980000 0x0 0x4000>; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_1: i2c@984000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00984000 0x0 0x4000>; + + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_2: i2c@988000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00988000 0x0 0x4000>; + + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_3: i2c@98c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x0098c000 0x0 0x4000>; + + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_4: i2c@990000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00990000 0x0 0x4000>; + + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,kaanapali-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00a00000 0x0 0x60000>; + + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x1f>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0xb6 0x0>; + dma-coherent; + }; + qupv3_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x2000>; @@ -485,6 +1049,447 @@ #size-cells = <2>; ranges; + i2c0: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a80000 0x0 0x4000>; + + interrupts = <GIC_SPI 828 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a80000 0x0 0x4000>; + + interrupts = <GIC_SPI 828 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a84000 0x0 0x4000>; + + interrupts = <GIC_SPI 829 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a84000 0x0 0x4000>; + + interrupts = <GIC_SPI 829 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a88000 0x0 0x4000>; + + interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi2: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a88000 0x0 0x4000>; + + interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + + interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + + interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a90000 0x0 0x4000>; + + interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a90000 0x0 0x4000>; + + interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c5: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a94000 0x0 0x4000>; + + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi5: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a94000 0x0 0x4000>; + + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c6: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a98000 0x0 0x4000>; + + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi6: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a98000 0x0 0x4000>; + + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + uart7: serial@a9c000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a9c000 0x0 0x4000>; @@ -559,6 +1564,24 @@ <&rpmhcc RPMH_IPA_CLK>; }; + cambistmclkcc: clock-controller@1760000 { + compatible = "qcom,kaanapali-cambistmclkcc"; + reg = <0x0 0x01760000 0x0 0x8000>; + + clocks = <&gcc GCC_CAM_BIST_MCLK_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + + power-domains = <&rpmhpd RPMHPD_MMCX>, + <&rpmhpd RPMHPD_MX>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + mmss_noc: interconnect@1780000 { compatible = "qcom,kaanapali-mmss-noc"; reg = <0x0 0x01780000 0x0 0x5b800>; @@ -566,6 +1589,653 @@ #interconnect-cells = <2>; }; + gpi_dma3: dma-controller@1900000 { + compatible = "qcom,kaanapali-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x01900000 0x0 0x60000>; + + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x1e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x4d6 0x0>; + dma-coherent; + }; + + qupv3_3: geniqup@19c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x019c0000 0x0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x4c3 0x0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c13: i2c@1980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x01980000 0x0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma3 0 0 QCOM_GPI_I2C>, + <&gpi_dma3 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c14: i2c@1984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x01984000 0x0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma3 0 1 QCOM_GPI_I2C>, + <&gpi_dma3 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c14_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi14: spi@1984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x01984000 0x0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma3 0 1 QCOM_GPI_SPI>, + <&gpi_dma3 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c15: i2c@1988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x01988000 0x0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma3 0 2 QCOM_GPI_I2C>, + <&gpi_dma3 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c15_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi15: spi@1988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x01988000 0x0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma3 0 2 QCOM_GPI_SPI>, + <&gpi_dma3 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c16: i2c@198c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0198c000 0x0 0x4000>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma3 0 3 QCOM_GPI_I2C>, + <&gpi_dma3 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c16_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi16: spi@198c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x198c000 0x0 0x4000>; + + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma3 0 3 QCOM_GPI_SPI>, + <&gpi_dma3 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c17: i2c@1990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x01990000 0x0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma3 0 4 QCOM_GPI_I2C>, + <&gpi_dma3 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c17_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi17: spi@1990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x01990000 0x0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma3 0 4 QCOM_GPI_SPI>, + <&gpi_dma3 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart18: serial@1994000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x01994000 0x0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP3_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart18_default>, <&qup_uart18_cts_rts>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + gpi_dma4: dma-controller@1a00000 { + compatible = "qcom,kaanapali-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x01a00000 0x0 0x60000>; + + interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x1e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x536 0x0>; + dma-coherent; + }; + + qupv3_4: geniqup@1ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x01ac0000 0x0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_4_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_4_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x523 0x0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c19: i2c@1a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x01a80000 0x0 0x4000>; + + interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP4_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_4 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma4 0 0 QCOM_GPI_I2C>, + <&gpi_dma4 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c19_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi19: spi@1a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x01a80000 0x0 0x4000>; + + interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP4_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_4 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma4 0 0 QCOM_GPI_SPI>, + <&gpi_dma4 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c20: i2c@1a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x01a84000 0x0 0x4000>; + + interrupts = <GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP4_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_4 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma4 0 1 QCOM_GPI_I2C>, + <&gpi_dma4 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c20_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi20: spi@1a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x01a84000 0x0 0x4000>; + + interrupts = <GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP4_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_4 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma4 0 1 QCOM_GPI_SPI>, + <&gpi_dma4 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c21: i2c@1a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x01a88000 0x0 0x4000>; + + interrupts = <GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP4_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_4 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma4 0 2 QCOM_GPI_I2C>, + <&gpi_dma4 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c21_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi21: spi@1a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x01a88000 0x0 0x4000>; + + interrupts = <GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP4_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_4 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + dmas = <&gpi_dma4 0 2 QCOM_GPI_SPI>, + <&gpi_dma4 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c22: i2c@1a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x01a8c000 0x0 0x4000>; + + interrupts = <GIC_SPI 859 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP4_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_4 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma4 0 3 QCOM_GPI_I2C>, + <&gpi_dma4 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c22_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c23: i2c@1a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x01a90000 0x0 0x4000>; + + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP4_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_4 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_4 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre_noc MASTER_QUP_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma4 0 4 QCOM_GPI_I2C>, + <&gpi_dma4 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c23_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + pcie0: pcie@1c00000 { device_type = "pci"; compatible = "qcom,kaanapali-pcie", "qcom,pcie-sm8550"; @@ -887,6 +2557,354 @@ #reset-cells = <1>; }; + videocc: clock-controller@20f0000 { + compatible = "qcom,kaanapali-videocc"; + reg = <0x0 0x020f0000 0x0 0x10000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_VIDEO_AHB_CLK>; + + power-domains = <&rpmhpd RPMHPD_MMCX>, + <&rpmhpd RPMHPD_MXC>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gxclkctl: clock-controller@3d64000 { + compatible = "qcom,kaanapali-gxclkctl"; + reg = <0x0 0x03d64000 0x0 0x6000>; + + power-domains = <&rpmhpd RPMHPD_GFX>, + <&rpmhpd RPMHPD_GMXC>, + <&gpucc GPU_CC_CX_GDSC>; + + #power-domain-cells = <1>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,kaanapali-gpucc"; + reg = <0x0 0x03d90000 0x0 0x9800>; + + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + remoteproc_adsp: remoteproc@6800000 { + compatible = "qcom,kaanapali-adsp-pas", "qcom,sm8550-adsp-pas"; + reg = <0x0 0x06800000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_MPROC_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_MPROC_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <2>; + + label = "lpass"; + + fastrpc { + compatible = "qcom,kaanapali-fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1043 0x20>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1044 0x20>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1045 0x20>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1046 0x20>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + + iommus = <&apps_smmu 0x1007 0x40>, + <&apps_smmu 0x1067 0x0>, + <&apps_smmu 0x1087 0x0>; + dma-coherent; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1041 0x20>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,kaanapali-lpass-wsa-macro", + "qcom,sm8550-lpass-wsa-macro"; + reg = <0x0 0x06aa0000 0x0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK + LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + #sound-dai-cells = <1>; + }; + + swr3: soundwire@6ab0000 { + compatible = "qcom,soundwire-v2.2.0", "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,kaanapali-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro"; + reg = <0x0 0x06ac0000 0x0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK + LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr1: soundwire@6ad0000 { + compatible = "qcom,soundwire-v2.2.0", "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <1>; + qcom,dout-ports = <11>; + + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,kaanapali-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro"; + reg = <0x0 0x06ae0000 0x0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,kaanapali-lpass-wsa-macro", + "qcom,sm8550-lpass-wsa-macro"; + reg = <0x0 0x06b00000 0x0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK + LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr0: soundwire@6b10000 { + compatible = "qcom,soundwire-v2.2.0", "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_lpiaon_noc: interconnect@7400000 { compatible = "qcom,kaanapali-lpass-lpiaon-noc"; reg = <0x0 0x07400000 0x0 0x19080>; @@ -901,6 +2919,168 @@ #interconnect-cells = <2>; }; + swr2: soundwire@7630000 { + compatible = "qcom,soundwire-v2.2.0", "qcom,soundwire-v2.0.0"; + reg = <0 0x07630000 0 0x10000>; + interrupts-extended = <&intc GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_txmacro>; + clock-names = "iface"; + label = "TX"; + + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@7660000 { + compatible = "qcom,kaanapali-lpass-va-macro", "qcom,sm8550-lpass-va-macro"; + reg = <0 0x07660000 0 0x2000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec"; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + lpass_tlmm: pinctrl@7760000 { + compatible = "qcom,sm8750-lpass-lpi-pinctrl", + "qcom,sm8650-lpass-lpi-pinctrl"; + reg = <0 0x07760000 0 0x20000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic23_default: dmic23-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + lpass_ag_noc: interconnect@7f40000 { compatible = "qcom,kaanapali-lpass-ag-noc"; reg = <0x0 0x07f40000 0x0 0xe080>; @@ -958,6 +3138,290 @@ }; }; + camcc: clock-controller@956d000 { + compatible = "qcom,kaanapali-camcc"; + reg = <0x0 0x0956d000 0x0 0x80000>; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + + power-domains = <&rpmhpd RPMHPD_MMCX>, + <&rpmhpd RPMHPD_MXC>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + mdss: display-subsystem@9800000 { + compatible = "qcom,kaanapali-mdss"; + reg = <0x0 0x09800000 0x0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_AHB_SWI_CLK>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + iommus = <&apps_smmu 0x800 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@9801000 { + compatible = "qcom,kaanapali-dpu"; + reg = <0x0 0x09801000 0x0 0x1c8000>, + <0x0 0x09b16000 0x0 0x3000>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpu_intf2_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + + dpu_intf0_out: endpoint { + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-156000000 { + opp-hz = /bits/ 64 <156000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-207000000 { + opp-hz = /bits/ 64 <207000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-337000000 { + opp-hz = /bits/ 64 <337000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-417000000 { + opp-hz = /bits/ 64 <417000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-532000000 { + opp-hz = /bits/ 64 <532000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + mdss_dsi0: dsi@9ac0000 { + compatible = "qcom,kaanapali-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x09ac0000 0x0 0x1000>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&dispcc DISP_CC_ESYNC0_CLK>, + <&dispcc DISP_CC_OSC_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus", + "dsi_pll_pixel", + "dsi_pll_byte", + "esync", + "osc", + "byte_src", + "pixel_src"; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-312500000 { + opp-hz = /bits/ 64 <312500000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@9ac1000 { + compatible = "qcom,kaanapali-dsi-phy-3nm"; + reg = <0x0 0x09ac1000 0x0 0x1cc>, + <0x0 0x09ac1200 0x0 0x280>, + <0x0 0x09ac1500 0x0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@9ba2000 { + compatible = "qcom,kaanapali-dispcc"; + reg = <0x0 0x09ba2000 0x0 0x20000>; + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <0>, + <0>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,kaanapali-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x10000>, @@ -992,6 +3456,90 @@ interrupt-controller; }; + tsens0: thermal-sensor@c229000 { + compatible = "qcom,kaanapali-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c229000 0x0 0x1000>, + <0x0 0x0c222000 0x0 0x1000>; + interrupts = <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 484 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c22a000 { + compatible = "qcom,kaanapali-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22a000 0x0 0x1000>, + <0x0 0x0c223000 0x0 0x1000>; + interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <12>; + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c22b000 { + compatible = "qcom,kaanapali-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22b000 0x0 0x1000>, + <0x0 0x0c224000 0x0 0x1000>; + interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <7>; + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c22c000 { + compatible = "qcom,kaanapali-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22c000 0x0 0x1000>, + <0x0 0x0c225000 0x0 0x1000>; + interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <4>; + #thermal-sensor-cells = <1>; + }; + + tsens4: thermal-sensor@c22d000 { + compatible = "qcom,kaanapali-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22d000 0x0 0x1000>, + <0x0 0x0c226000 0x0 0x1000>; + interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + + tsens5: thermal-sensor@c22e000 { + compatible = "qcom,kaanapali-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22e000 0x0 0x1000>, + <0x0 0x0c227000 0x0 0x1000>; + interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <12>; + #thermal-sensor-cells = <1>; + }; + + tsens6: thermal-sensor@c22f000 { + compatible = "qcom,kaanapali-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22f000 0x0 0x1000>, + <0x0 0x0c228000 0x0 0x1000>; + interrupts = <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <7>; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-management@c300000 { compatible = "qcom,kaanapali-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; @@ -1006,6 +3554,53 @@ #clock-cells = <0>; }; + arbiter@c400000 { + compatible = "qcom,kaanapali-spmi-pmic-arb", "qcom,glymur-spmi-pmic-arb"; + reg = <0x0 0x0c400000 0x0 0x3000>, + <0x0 0x0c900000 0x0 0x400000>, + <0x0 0x0c4c0000 0x0 0x400000>, + <0x0 0x0c403000 0x0 0x8000>; + reg-names = "core", + "chnls", + "obsrvr", + "chnl_map"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + qcom,channel = <0>; + qcom,ee = <0>; + + spmi_bus0: spmi@c426000 { + reg = <0x0 0x0c426000 0x0 0x4000>, + <0x0 0x0c8c0000 0x0 0x10000>, + <0x0 0x0c42a000 0x0 0x8000>; + reg-names = "cnfg", + "intr", + "chnl_owner"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + spmi_bus1: spmi@c437000 { + reg = <0x0 0x0c437000 0x0 0x4000>, + <0x0 0x0c8d0000 0x0 0x10000>, + <0x0 0x0c43b000 0x0 0x8000>; + reg-names = "cnfg", + "intr", + "chnl_owner"; + interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; + tlmm: pinctrl@f100000 { compatible = "qcom,kaanapali-tlmm"; reg = <0x0 0x0f100000 0x0 0x300000>; @@ -1017,6 +3612,491 @@ #interrupt-cells = <2>; wakeup-parent = <&pdc>; + hub_i2c0_data_clk: hub-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio66", "gpio67"; + function = "i2chub0_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c1_data_clk: hub-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio78", "gpio79"; + function = "i2chub0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c2_data_clk: hub-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "i2chub0_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c3_data_clk: hub-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio70", "gpio71"; + function = "i2chub0_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c4_data_clk: hub-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio73"; + function = "i2chub0_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio83"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio74", "gpio75"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio56", "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio0", "gpio1"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio117", "gpio118"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio122", "gpio123"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio208", "gpio209"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "qup3_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup3_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + /* SDA, SCL */ + pins = "gpio12", "gpio13"; + function = "qup3_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "qup3_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c17_data_clk: qup-i2c17-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "qup3_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c19_data_clk: qup-i2c19-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup4_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c20_data_clk: qup-i2c20-data-clk-state { + /* SDA, SCL */ + pins = "gpio28", "gpio29"; + function = "qup4_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c21_data_clk: qup-i2c21-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup4_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c22_data_clk: qup-i2c22-data-clk-state { + /* SDA, SCL */ + pins = "gpio121", "gpio84"; + function = "qup4_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c23_data_clk: qup-i2c23-data-clk-state { + /* SDA, SCL */ + pins = "gpio161", "gpio162"; + function = "qup4_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio81"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio80", "gpio83", "gpio82"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio77"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio74", "gpio75", "gpio76"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio43"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio39"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio3"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */pins = "gpio0", "gpio1", "gpio2"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio7"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio4", "gpio5", "gpio6"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio120"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio117", "gpio118", "gpio119"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio125"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio122", "gpio123", "gpio124"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio11"; + function = "qup3_se1"; + drive-strength = <6>; + bias-pull-up; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup3_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio15"; + function = "qup3_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio12", "gpio13", "gpio14"; + function = "qup3_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_cs: qup-spi16-cs-state { + pins = "gpio19"; + function = "qup3_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_data_clk: qup-spi16-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio16", "gpio17", "gpio18"; + function = "qup3_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_cs: qup-spi17-cs-state { + pins = "gpio23"; + function = "qup3_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_data_clk: qup-spi17-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup3_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_cs: qup-spi19-cs-state { + pins = "gpio51"; + function = "qup4_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_data_clk: qup-spi19-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup4_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_cs: qup-spi20-cs-state { + pins = "gpio31"; + function = "qup4_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_data_clk: qup-spi20-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio28", "gpio29", "gpio30"; + function = "qup4_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_cs: qup-spi21-cs-state { + pins = "gpio35"; + function = "qup4_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_data_clk: qup-spi21-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup4_se2"; + drive-strength = <6>; + bias-disable; + }; + qup_uart7_default: qup-uart7-state { /* TX, RX */ pins = "gpio62", "gpio63"; @@ -1025,6 +4105,22 @@ bias-disable; }; + qup_uart18_default: qup-uart18-default-state { + /* TX, RX */ + pins = "gpio26", "gpio27"; + function = "qup3_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart18_cts_rts: qup-uart18-cts-rts-state { + /* CTS, RTS */ + pins = "gpio24", "gpio25"; + function = "qup3_se5"; + drive-strength = <2>; + bias-pull-down; + }; + sdc2_default: sdc2-default-state { clk-pins { pins = "sdc2_clk"; @@ -1080,6 +4176,1114 @@ }; }; + stm@10002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x10002000 0x0 0x1000>, + <0x0 0x16280000 0x0 0x180000>; + reg-names = "stm-base", + "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel_in0_in7>; + }; + }; + }; + }; + + tpdm@10003000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10003000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + + out-ports { + port { + tpdm_dcc_out: endpoint { + remote-endpoint = <&tpda_qdss_in0>; + }; + }; + }; + }; + + tpda@10004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpda_qdss_in0: endpoint { + remote-endpoint = <&tpdm_dcc_out>; + }; + }; + + port@1 { + reg = <1>; + + tpda_qdss_in1: endpoint { + remote-endpoint = <&tpdm_spdm_out>; + }; + }; + }; + + out-ports { + port { + tpda_qdss_out: endpoint { + remote-endpoint = <&funnel_in0_in6>; + }; + }; + }; + }; + + tpdm@1000f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1000f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + + out-ports { + port { + tpdm_spdm_out: endpoint { + remote-endpoint = <&tpda_qdss_in1>; + }; + }; + }; + }; + + funnel@10041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10041000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + funnel_in0_in0: endpoint { + remote-endpoint = <&tn_ag_out>; + }; + }; + + port@6 { + reg = <6>; + + funnel_in0_in6: endpoint { + remote-endpoint = <&tpda_qdss_out>; + }; + }; + + port@7 { + reg = <7>; + + funnel_in0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel_in0_out: endpoint { + remote-endpoint = <&funnel_aoss_in6>; + }; + }; + }; + }; + + tpdm@11000000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11000000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_modem0_out: endpoint { + remote-endpoint = <&tpda_modem_in0>; + }; + }; + }; + }; + + tpda@11004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x11004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpda_modem_in0: endpoint { + remote-endpoint = <&tpdm_modem0_out>; + }; + }; + + port@1 { + reg = <1>; + + tpda_modem_in1: endpoint { + remote-endpoint = <&tpdm_modem1_out>; + }; + }; + + port@2 { + reg = <2>; + + tpda_modem_in2: endpoint { + remote-endpoint = <&tpdm_modem2_out>; + }; + }; + }; + + out-ports { + port { + tpda_modem_out: endpoint { + remote-endpoint = <&funnel_modem_dl_in0>; + }; + }; + }; + }; + + funnel@11005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x11005000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + funnel_modem_dl_in0: endpoint { + remote-endpoint = <&tpda_modem_out>; + }; + }; + }; + + out-ports { + port { + funnel_modem_dl_out: endpoint { + remote-endpoint = <&tn_ag_in13>; + }; + }; + }; + }; + + tpdm@1102c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1102c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_gcc_out: endpoint { + remote-endpoint = <&tn_ag_in17>; + }; + }; + }; + }; + + tpdm@11180000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11180000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_cdsp_out: endpoint { + remote-endpoint = <&tpda_cdsp_in0>; + }; + }; + }; + }; + + tpdm@11183000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11183000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,cmb-element-bits = <32>; + + out-ports { + port { + tpdm_cdsp_cmsr1_out: endpoint { + remote-endpoint = <&tpda_cdsp_in3>; + }; + }; + }; + }; + + tpdm@11184000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11184000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,cmb-element-bits = <32>; + + out-ports { + port { + tpdm_cdsp_cmsr2_out: endpoint { + remote-endpoint = <&tpda_cdsp_in4>; + }; + }; + }; + }; + + tpdm@11185000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11185000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + + out-ports { + port { + tpdm_cdsp_dpm1_out: endpoint { + remote-endpoint = <&tpda_cdsp_in5>; + }; + }; + }; + }; + + tpdm@11186000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11186000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + + out-ports { + port { + tpdm_cdsp_dpm2_out: endpoint { + remote-endpoint = <&tpda_cdsp_in6>; + }; + }; + }; + }; + + tpda@11188000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x11188000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpda_cdsp_in0: endpoint { + remote-endpoint = <&tpdm_cdsp_out>; + }; + }; + + port@1 { + reg = <1>; + + tpda_cdsp_in1: endpoint { + remote-endpoint = <&tpdm_cdsp_llm_out>; + }; + }; + + port@2 { + reg = <2>; + + tpda_cdsp_in2: endpoint { + remote-endpoint = <&tpdm_cdsp_llm2_out>; + }; + }; + + port@3 { + reg = <3>; + + tpda_cdsp_in3: endpoint { + remote-endpoint = <&tpdm_cdsp_cmsr1_out>; + }; + }; + + port@4 { + reg = <4>; + + tpda_cdsp_in4: endpoint { + remote-endpoint = <&tpdm_cdsp_cmsr2_out>; + }; + }; + + port@5 { + reg = <5>; + + tpda_cdsp_in5: endpoint { + remote-endpoint = <&tpdm_cdsp_dpm1_out>; + }; + }; + + port@6 { + reg = <6>; + + tpda_cdsp_in6: endpoint { + remote-endpoint = <&tpdm_cdsp_dpm2_out>; + }; + }; + }; + + out-ports { + port { + tpda_cdsp_out: endpoint { + remote-endpoint = <&funnel_cdsp_in0>; + }; + }; + }; + }; + + funnel@11189000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x11189000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + funnel_cdsp_in0: endpoint { + remote-endpoint = <&tpda_cdsp_out>; + }; + }; + }; + + out-ports { + port { + funnel_cdsp_out: endpoint { + remote-endpoint = <&tn_ag_in16>; + }; + }; + }; + }; + + tpdm@111a3000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111a3000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_pmu_out: endpoint { + remote-endpoint = <&tn_ag_in29>; + }; + }; + }; + }; + + tpdm@111a4000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111a4000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_qrng_out: endpoint { + remote-endpoint = <&tn_ag_in18>; + }; + }; + }; + }; + + tpdm@111a5000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111a5000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_dlmm_out: endpoint { + remote-endpoint = <&tn_ag_in25>; + }; + }; + }; + }; + + tpdm@111a6000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111a6000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_north_dsb_out: endpoint { + remote-endpoint = <&tn_ag_in26>; + }; + }; + }; + }; + + tpdm@111a7000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111a7000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_south_dsb_out: endpoint { + remote-endpoint = <&tn_ag_in27>; + }; + }; + }; + }; + + tpdm@111a8000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111a8000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_rdpm_cmb0_out: endpoint { + remote-endpoint = <&tn_ag_in30>; + }; + }; + }; + }; + + tpdm@111a9000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111a9000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_rdpm_cmb1_out: endpoint { + remote-endpoint = <&tn_ag_in31>; + }; + }; + }; + }; + + tpdm@111aa000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111aa000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_rdpm_cmb2_out: endpoint { + remote-endpoint = <&tn_ag_in32>; + }; + }; + }; + }; + + tpdm@111ab000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111ab000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_ipcc_cmb0_out: endpoint { + remote-endpoint = <&tn_ag_in36>; + }; + }; + }; + }; + + tpdm@111ac000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111ac000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_ipcc_cmb1_out: endpoint { + remote-endpoint = <&tn_ag_in28>; + }; + }; + }; + }; + + tpdm@111ad000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111ad000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_ipcc_cmb2_out: endpoint { + remote-endpoint = <&tn_ag_in34>; + }; + }; + }; + }; + + tpdm@111ae000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111ae000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_ipcc_cmb3_out: endpoint { + remote-endpoint = <&tn_ag_in37>; + }; + }; + }; + }; + + tpdm@111af000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111af000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_ipcc_cmb4_out: endpoint { + remote-endpoint = <&tn_ag_in35>; + }; + }; + }; + }; + + tpdm@111b3000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111b3000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_pcie_rscc_out: endpoint { + remote-endpoint = <&tn_ag_in8>; + }; + }; + }; + }; + + tn@111b8000 { + compatible = "qcom,coresight-tnoc", "arm,primecell"; + reg = <0x0 0x111b8000 0x0 0x4200>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@8 { + reg = <8>; + + tn_ag_in8: endpoint { + remote-endpoint = <&tpdm_pcie_rscc_out>; + }; + }; + + port@d { + reg = <0xd>; + + tn_ag_in13: endpoint { + remote-endpoint = <&funnel_modem_dl_out>; + }; + }; + + port@10 { + reg = <0x10>; + + tn_ag_in16: endpoint { + remote-endpoint = <&funnel_cdsp_out>; + }; + }; + + port@11 { + reg = <0x11>; + + tn_ag_in17: endpoint { + remote-endpoint = <&tpdm_gcc_out>; + }; + }; + + port@12 { + reg = <0x12>; + + tn_ag_in18: endpoint { + remote-endpoint = <&tpdm_qrng_out>; + }; + }; + + port@13 { + reg = <0x13>; + + tn_ag_in19: endpoint { + remote-endpoint = <&tpdm_qm_out>; + }; + }; + + port@15 { + reg = <0x15>; + + tn_ag_in21: endpoint { + remote-endpoint = <&tpdm_ipa_out>; + }; + }; + + port@19 { + reg = <0x19>; + + tn_ag_in25: endpoint { + remote-endpoint = <&tpdm_dlmm_out>; + }; + }; + + port@1a { + reg = <0x1a>; + + tn_ag_in26: endpoint { + remote-endpoint = <&tpdm_north_dsb_out>; + }; + }; + + port@1b { + reg = <0x1b>; + + tn_ag_in27: endpoint { + remote-endpoint = <&tpdm_south_dsb_out>; + }; + }; + + port@1c { + reg = <0x1c>; + + tn_ag_in28: endpoint { + remote-endpoint = <&tpdm_ipcc_cmb1_out>; + }; + }; + + port@1d { + reg = <0x1d>; + + tn_ag_in29: endpoint { + remote-endpoint = <&tpdm_pmu_out>; + }; + }; + + port@1e { + reg = <0x1e>; + + tn_ag_in30: endpoint { + remote-endpoint = <&tpdm_rdpm_cmb0_out>; + }; + }; + + port@1f { + reg = <0x1f>; + + tn_ag_in31: endpoint { + remote-endpoint = <&tpdm_rdpm_cmb1_out>; + }; + }; + + port@20 { + reg = <0x20>; + + tn_ag_in32: endpoint { + remote-endpoint = <&tpdm_rdpm_cmb2_out>; + }; + }; + + port@22 { + reg = <0x22>; + + tn_ag_in34: endpoint { + remote-endpoint = <&tpdm_ipcc_cmb2_out>; + }; + }; + + port@23 { + reg = <0x23>; + + tn_ag_in35: endpoint { + remote-endpoint = <&tpdm_ipcc_cmb4_out>; + }; + }; + + port@24 { + reg = <0x24>; + + tn_ag_in36: endpoint { + remote-endpoint = <&tpdm_ipcc_cmb0_out>; + }; + }; + + port@25 { + reg = <37>; + + tn_ag_in37: endpoint { + remote-endpoint = <&tpdm_ipcc_cmb3_out>; + }; + }; + }; + + out-ports { + port { + tn_ag_out: endpoint { + remote-endpoint = <&funnel_in0_in0>; + }; + }; + }; + }; + + tpdm@111d0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111d0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_qm_out: endpoint { + remote-endpoint = <&tn_ag_in19>; + }; + }; + }; + }; + + tpdm@11303000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11303000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + + out-ports { + port { + tpdm_swao_prio4_out: endpoint { + remote-endpoint = <&tpda_aoss_in4>; + }; + }; + }; + }; + + funnel@11304000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x11304000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@5 { + reg = <5>; + + funnel_aoss_in5: endpoint { + remote-endpoint = <&tpda_aoss_out>; + }; + }; + + port@6 { + reg = <6>; + + funnel_aoss_in6: endpoint { + remote-endpoint = <&funnel_in0_out>; + }; + }; + + }; + + out-ports { + port { + funnel_aoss_out: endpoint { + remote-endpoint = <&tmc_etf_in>; + }; + }; + }; + }; + + tmc@11305000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x11305000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + tmc_etf_in: endpoint { + remote-endpoint = <&funnel_aoss_out>; + }; + }; + }; + }; + + tpda@11308000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x11308000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpda_aoss_in0: endpoint { + remote-endpoint = <&tpdm_swao_prio0_out>; + }; + }; + + port@1 { + reg = <1>; + + tpda_aoss_in1: endpoint { + remote-endpoint = <&tpdm_swao_prio1_out>; + }; + }; + + port@2 { + reg = <2>; + + tpda_aoss_in2: endpoint { + remote-endpoint = <&tpdm_swao_prio2_out>; + }; + }; + + port@3 { + reg = <3>; + + tpda_aoss_in3: endpoint { + remote-endpoint = <&tpdm_swao_prio3_out>; + }; + }; + + port@4 { + reg = <4>; + + tpda_aoss_in4: endpoint { + remote-endpoint = <&tpdm_swao_prio4_out>; + }; + }; + + port@5 { + reg = <5>; + + tpda_aoss_in5: endpoint { + remote-endpoint = <&tpdm_swao_out>; + }; + }; + }; + + out-ports { + port { + tpda_aoss_out: endpoint { + remote-endpoint = <&funnel_aoss_in5>; + }; + }; + }; + }; + + tpdm@11309000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11309000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + + out-ports { + port { + tpdm_swao_prio0_out: endpoint { + remote-endpoint = <&tpda_aoss_in0>; + }; + }; + }; + }; + + tpdm@1130a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1130a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + + out-ports { + port { + tpdm_swao_prio1_out: endpoint { + remote-endpoint = <&tpda_aoss_in1>; + }; + }; + }; + }; + + tpdm@1130b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1130b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + + out-ports { + port { + tpdm_swao_prio2_out: endpoint { + remote-endpoint = <&tpda_aoss_in2>; + }; + }; + }; + }; + + tpdm@1130c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1130c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + + out-ports { + port { + tpdm_swao_prio3_out: endpoint { + remote-endpoint = <&tpda_aoss_in3>; + }; + }; + }; + }; + + tpdm@1130d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1130d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_swao_out: endpoint { + remote-endpoint = <&tpda_aoss_in5>; + }; + }; + }; + }; + + tpdm@11422000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11422000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_ipa_out: endpoint { + remote-endpoint = <&tn_ag_in21>; + }; + }; + }; + }; + sram@14680000 { compatible = "qcom,kaanapali-imem", "mmio-sram"; reg = <0x0 0x14680000 0x0 0x1000>; @@ -1239,7 +5443,7 @@ gic_its: msi-controller@17040000 { compatible = "arm,gic-v3-its"; - reg = <0x0 0x17040000 0x0 0x20000>; + reg = <0x0 0x17040000 0x0 0x40000>; msi-controller; #msi-cells = <1>; @@ -1476,8 +5680,165 @@ #interconnect-cells = <2>; }; + remoteproc_cdsp: remoteproc@26300000 { + compatible = "qcom,kaanapali-cdsp-pas", "qcom,sm8550-cdsp-pas"; + reg = <0x0 0x26300000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", + "mxc", + "nsp"; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_MPROC_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_MPROC_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + qcom,remote-pid = <5>; + label = "cdsp"; + + fastrpc { + compatible = "qcom,kaanapali-fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x19c1 0x0>, + <&apps_smmu 0x1961 0x0>, + <&apps_smmu 0x0c21 0x0>, + <&apps_smmu 0x0c01 0x40>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1962 0x0>, + <&apps_smmu 0x0c02 0x20>, + <&apps_smmu 0x0c42 0x0>, + <&apps_smmu 0x19c2 0x0>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1963 0x0>, + <&apps_smmu 0x0c23 0x0>, + <&apps_smmu 0x0c03 0x40>, + <&apps_smmu 0x19c3 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1964 0x0>, + <&apps_smmu 0x0c44 0x0>, + <&apps_smmu 0x0c04 0x20>, + <&apps_smmu 0x19c4 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1965 0x0>, + <&apps_smmu 0x0c45 0x0>, + <&apps_smmu 0x0c05 0x20>, + <&apps_smmu 0x19c5 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1966 0x0>, + <&apps_smmu 0x0c06 0x20>, + <&apps_smmu 0x0c46 0x0>, + <&apps_smmu 0x19c6 0x0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1967 0x0>, + <&apps_smmu 0x0c27 0x0>, + <&apps_smmu 0x0c07 0x40>, + <&apps_smmu 0x19c7 0x0>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1968 0x0>, + <&apps_smmu 0x0c08 0x20>, + <&apps_smmu 0x0c48 0x0>, + <&apps_smmu 0x19c8 0x0>; + dma-coherent; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x196c 0x0>, + <&apps_smmu 0x0c2c 0x00>, + <&apps_smmu 0x0c0c 0x40>, + <&apps_smmu 0x19cc 0x0>; + dma-coherent; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x196d 0x0>, + <&apps_smmu 0x0c0d 0x40>, + <&apps_smmu 0x0c2e 0x0>, + <&apps_smmu 0x0c2d 0x0>, + <&apps_smmu 0x19cd 0x0>; + dma-coherent; + }; + }; + }; + }; + /* Cluster 0 */ - pmu@310b3400 { + pmu@310b3400 { compatible = "qcom,kaanapali-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0x0 0x310b3400 0x0 0x600>; @@ -1538,7 +5899,7 @@ }; /* Cluster 1 */ - pmu@310b7400 { + pmu@310b7400 { compatible = "qcom,kaanapali-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0x0 0x310b7400 0x0 0x600>; @@ -1595,6 +5956,997 @@ }; }; + thermal-zones { + cpullc-0-0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + cpullc-0-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpullc-0-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpullc-0-1-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + cpullc-0-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpullc-0-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + qmx-0-0-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + qmx-0-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + qmx-0-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + qmx-0-1-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + qmx-0-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + qmx-0-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + qmx-0-2-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + qmx-0-2-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + qmx-0-2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-0-0-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + cpu-0-0-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-0-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-0-1-thermal { + thermal-sensors = <&tsens1 1>; + + trips { + cpu-0-0-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-0-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-1-0-thermal { + thermal-sensors = <&tsens1 2>; + + trips { + cpu-0-1-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-1-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-1-1-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + cpu-0-1-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-1-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-2-0-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + cpu-0-2-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-2-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-2-1-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + cpu-0-2-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-2-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-3-0-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + cpu-0-3-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-3-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-3-1-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + cpu-0-3-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-3-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-4-0-thermal { + thermal-sensors = <&tsens1 8>; + + trips { + cpu-0-4-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-4-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-4-1-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + cpu-0-4-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-4-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-5-0-thermal { + thermal-sensors = <&tsens1 10>; + + trips { + cpu-0-5-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-5-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-5-1-thermal { + thermal-sensors = <&tsens1 11>; + + trips { + cpu-0-5-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-5-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpullc-1-0-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + cpullc-1-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpullc-1-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpullc-1-1-thermal { + thermal-sensors = <&tsens2 1>; + + trips { + cpullc-1-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpullc-1-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + qmx-1-0-thermal { + thermal-sensors = <&tsens2 2>; + + trips { + qmx-1-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + qmx-1-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + qmx-1-1-thermal { + thermal-sensors = <&tsens2 3>; + + trips { + qmx-1-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + qmx-1-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + qmx-1-2-thermal { + thermal-sensors = <&tsens2 4>; + + trips { + qmx-1-2-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + qmx-1-2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + qmx-1-3-thermal { + thermal-sensors = <&tsens2 5>; + + trips { + qmx-1-3-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + qmx-1-3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + qmx-1-4-thermal { + thermal-sensors = <&tsens2 6>; + + trips { + qmx-1-4-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + qmx-1-4-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-1-0-0-thermal { + thermal-sensors = <&tsens3 0>; + + trips { + cpu-1-0-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-1-0-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-1-0-1-thermal { + thermal-sensors = <&tsens3 1>; + + trips { + cpu-1-0-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-1-0-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-1-1-0-thermal { + thermal-sensors = <&tsens3 2>; + + trips { + cpu-1-1-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-1-1-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-1-1-1-thermal { + thermal-sensors = <&tsens3 3>; + + trips { + cpu-1-1-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-1-1-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx-0-thermal { + thermal-sensors = <&tsens4 0>; + + trips { + nsphvx-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphvx-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx-1-thermal { + thermal-sensors = <&tsens4 1>; + + trips { + nsphvx-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphvx-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx-2-thermal { + thermal-sensors = <&tsens4 2>; + + trips { + nsphvx-2-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphvx-2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx-3-thermal { + thermal-sensors = <&tsens4 3>; + + trips { + nsphvx-3-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphvx-3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx-0-thermal { + thermal-sensors = <&tsens4 4>; + + trips { + nsphmx-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphmx-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx-1-thermal { + thermal-sensors = <&tsens4 5>; + + trips { + nsphmx-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphmx-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx-2-thermal { + thermal-sensors = <&tsens4 6>; + + trips { + nsphmx-2-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphmx-2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx-3-thermal { + thermal-sensors = <&tsens4 7>; + + trips { + nsphmx-3-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphmx-3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-0-thermal { + thermal-sensors = <&tsens5 0>; + + trips { + gpuss-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-1-thermal { + thermal-sensors = <&tsens5 1>; + + trips { + gpuss-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-2-thermal { + thermal-sensors = <&tsens5 2>; + + trips { + gpuss-2-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-3-thermal { + thermal-sensors = <&tsens5 3>; + + trips { + gpuss-3-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-4-thermal { + thermal-sensors = <&tsens5 4>; + + trips { + gpuss-4-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-4-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-5-thermal { + thermal-sensors = <&tsens5 5>; + + trips { + gpuss-5-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-5-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-6-thermal { + thermal-sensors = <&tsens5 6>; + + trips { + gpuss-6-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-6-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-7-thermal { + thermal-sensors = <&tsens5 7>; + + trips { + gpuss-7-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-7-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-8-thermal { + thermal-sensors = <&tsens5 8>; + + trips { + gpuss-8-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-8-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-9-thermal { + thermal-sensors = <&tsens5 9>; + + trips { + gpuss-9-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-9-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-10-thermal { + thermal-sensors = <&tsens5 10>; + + trips { + gpuss-10-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-10-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + thermal-sensors = <&tsens5 11>; + + trips { + ddr-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + ddr-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss-0-thermal { + thermal-sensors = <&tsens6 0>; + + trips { + mdmss-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + mdmss-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss-1-thermal { + thermal-sensors = <&tsens6 1>; + trips { + mdmss-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + mdmss-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss-2-thermal { + thermal-sensors = <&tsens6 2>; + + trips { + mdmss-2-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + mdmss-2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss-3-thermal { + thermal-sensors = <&tsens6 3>; + + trips { + mdmss-3-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + mdmss-3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera-0-thermal { + thermal-sensors = <&tsens6 4>; + + trips { + camera-0-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + camera-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera-1-thermal { + thermal-sensors = <&tsens6 5>; + + trips { + camera-1-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + camera-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens6 6>; + + trips { + video-hot { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + video-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; @@ -1603,4 +6955,56 @@ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; + + tpdm-cdsp-llm { + compatible = "qcom,coresight-static-tpdm"; + qcom,cmb-element-bits = <32>; + + out-ports { + port { + tpdm_cdsp_llm_out: endpoint { + remote-endpoint = <&tpda_cdsp_in1>; + }; + }; + }; + }; + + tpdm-cdsp-llm2 { + compatible = "qcom,coresight-static-tpdm"; + qcom,cmb-element-bits = <32>; + + out-ports { + port { + tpdm_cdsp_llm2_out: endpoint { + remote-endpoint = <&tpda_cdsp_in2>; + }; + }; + }; + }; + + tpdm-modem1 { + compatible = "qcom,coresight-static-tpdm"; + qcom,cmb-element-bits = <32>; + + out-ports { + port { + tpdm_modem1_out: endpoint { + remote-endpoint = <&tpda_modem_in1>; + }; + }; + }; + }; + + tpdm-modem2 { + compatible = "qcom,coresight-static-tpdm"; + qcom,cmb-element-bits = <64>; + + out-ports { + port { + tpdm_modem2_out: endpoint { + remote-endpoint = <&tpda_modem_in2>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi index 6079e67ea829..988ca5f7c8a0 100644 --- a/arch/arm64/boot/dts/qcom/kodiak.dtsi +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi @@ -2445,7 +2445,7 @@ reg = <0 0x01c0e000 0 0x1000>; clocks = <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_EN>, + <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE1_PHY_RCHNG_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "aux", @@ -2642,6 +2642,8 @@ qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; + sram = <&ipa_modem_tables>; + status = "disabled"; }; @@ -3036,6 +3038,110 @@ bias-pull-down; }; + lpass_i2s1_active: i2s1-active-state { + clk-pins { + pins = "gpio6"; + function = "i2s1_clk"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + ws-pins { + pins = "gpio7"; + function = "i2s1_ws"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + data-pins { + pins = "gpio8", "gpio9"; + function = "i2s1_data"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + + lpass_i2s1_sleep: i2s1-sleep-state { + clk-pins { + pins = "gpio6"; + function = "i2s1_clk"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + ws-pins { + pins = "gpio7"; + function = "i2s1_ws"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + data-pins { + pins = "gpio8", "gpio9"; + function = "i2s1_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + lpass_i2s2_active: i2s2-active-state { + clk-pins { + pins = "gpio10"; + function = "i2s2_clk"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + ws-pins { + pins = "gpio11"; + function = "i2s2_ws"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + data-pins { + pins = "gpio12", "gpio13"; + function = "i2s2_data"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + + lpass_i2s2_sleep: i2s2-sleep-state { + clk-pins { + pins = "gpio10"; + function = "i2s2_clk"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + ws-pins { + pins = "gpio11"; + function = "i2s2_ws"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + data-pins { + pins = "gpio12", "gpio13"; + function = "i2s2_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + lpass_rx_swr_clk: rx-swr-clk-state { pins = "gpio3"; function = "swr_rx_clk"; @@ -4849,6 +4955,7 @@ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; + usb-role-switch; ports { #address-cells = <1>; @@ -5505,8 +5612,8 @@ edp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5604,8 +5711,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5721,6 +5828,13 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; + cam_mclk3_default: cam-mclk3-default-state { + pins = "gpio67"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + cci0_default: cci0-default-state { pins = "gpio69", "gpio70"; function = "cci_i2c"; @@ -6577,6 +6691,10 @@ ranges = <0 0 0x146a5000 0x6000>; + ipa_modem_tables: modem-tables@3000 { + reg = <0x3000 0x2000>; + }; + pil-reloc@594c { compatible = "qcom,pil-reloc-info"; reg = <0x594c 0xc8>; diff --git a/arch/arm64/boot/dts/qcom/lemans-el2.dtso b/arch/arm64/boot/dts/qcom/lemans-el2.dtso index ed615dce6c78..621ad930cf54 100644 --- a/arch/arm64/boot/dts/qcom/lemans-el2.dtso +++ b/arch/arm64/boot/dts/qcom/lemans-el2.dtso @@ -10,6 +10,10 @@ /dts-v1/; /plugin/; +&gpu_zap_shader { + status = "disabled"; +}; + &iris { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso new file mode 100644 index 000000000000..268fc6b05d4b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + model = "Qualcomm Technologies, Inc. Lemans-evk IFP Mezzanine"; + + vreg_0p9: regulator-0v9 { + compatible = "regulator-fixed"; + regulator-name = "VREG_0P9"; + + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_1p8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +ðernet1 { + phy-handle = <&hsgmii_phy1>; + phy-mode = "2500base-x"; + + pinctrl-0 = <ðernet1_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + + nvmem-cells = <&mac_addr1>; + nvmem-cell-names = "mac-address"; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + hsgmii_phy1: ethernet-phy@18 { + compatible = "ethernet-phy-id004d.d101"; + reg = <0x18>; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&i2c18 { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "giantec,gt24c256c", "atmel,24c256"; + reg = <0x52>; + pagesize = <64>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mac_addr1: mac-addr@0 { + reg = <0x0 0x6>; + }; + }; + }; +}; + +&pcie0 { + iommu-map = <0x0 &pcie_smmu 0x0 0x1>, + <0x100 &pcie_smmu 0x1 0x1>, + <0x208 &pcie_smmu 0x2 0x1>, + <0x210 &pcie_smmu 0x3 0x1>, + <0x218 &pcie_smmu 0x4 0x1>, + <0x300 &pcie_smmu 0x5 0x1>, + <0x400 &pcie_smmu 0x6 0x1>, + <0x500 &pcie_smmu 0x7 0x1>, + <0x501 &pcie_smmu 0x8 0x1>; +}; + +&pcieport0 { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0,0 { + compatible = "pci1179,0623"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x2 0xff>; + + vddc-supply = <&vreg_0p9>; + vdd18-supply = <&vreg_1p8>; + vdd09-supply = <&vreg_0p9>; + vddio1-supply = <&vreg_1p8>; + vddio2-supply = <&vreg_1p8>; + vddio18-supply = <&vreg_1p8>; + + i2c-parent = <&i2c18 0x77>; + + resx-gpios = <&tlmm 140 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&tc9563_resx_n>; + pinctrl-names = "default"; + + pcie@1,0 { + reg = <0x20800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x3 0xff>; + }; + + pcie@2,0 { + reg = <0x21000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x4 0xff>; + }; + + pcie@3,0 { + reg = <0x21800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x5 0xff>; + + pci@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + + pci@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + }; + }; +}; + +&serdes1 { + phy-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&tlmm { + ethernet1_default: ethernet1-default-state { + ethernet1-mdc-pins { + pins = "gpio20"; + function = "emac1_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet1-mdio-pins { + pins = "gpio21"; + function = "emac1_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + tc9563_resx_n: tc9563-resx-state { + pins = "gpio140"; + function = "gpio"; + bias-disable; + /* Reset pin of tc9563 is active low hence set default + * state of this pin to output-high. + */ + output-high; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts index 90fce947ca7e..c665db6a4595 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts @@ -21,6 +21,7 @@ ethernet0 = ðernet0; mmc1 = &sdhc; serial0 = &uart10; + serial2 = &uart0; }; dmic: audio-codec-0 { @@ -44,7 +45,7 @@ data-role = "dual"; power-role = "dual"; - vbus-supply = <&vbus_supply_regulator_0>; + vbus-supply = <&usb0_vbus>; ports { #address-cells = <1>; @@ -68,6 +69,25 @@ }; }; + connector-2 { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + id-gpios = <&pmm8654au_2_gpios 11 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&expander3 3 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb2_vbus>; + + pinctrl-0 = <&usb2_id>; + pinctrl-names = "default"; + + port { + usb2_con_hs_ep: endpoint { + remote-endpoint = <&usb_2_dwc3_hs>; + }; + }; + }; + edp0-connector { compatible = "dp-connector"; label = "EDP0"; @@ -132,15 +152,24 @@ }; }; - vbus_supply_regulator_0: regulator-vbus-supply-0 { + usb0_vbus: regulator-usb0-vbus { compatible = "regulator-fixed"; - regulator-name = "vbus_supply_0"; + regulator-name = "usb0_vbus"; gpio = <&expander1 2 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; }; + usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + gpio = <&pmm8654au_1_gpios 9 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + vmmc_sdc: regulator-vmmc-sdc { compatible = "regulator-fixed"; @@ -546,6 +575,11 @@ reg = <0x38>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 138 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander0_int>; + pinctrl-names = "default"; }; expander1: gpio@39 { @@ -553,6 +587,11 @@ reg = <0x39>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 19 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander1_int>; + pinctrl-names = "default"; }; expander2: gpio@3a { @@ -560,6 +599,11 @@ reg = <0x3a>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 139 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander2_int>; + pinctrl-names = "default"; }; expander3: gpio@3b { @@ -567,6 +611,11 @@ reg = <0x3b>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander3_int>; + pinctrl-names = "default"; }; eeprom@50 { @@ -699,6 +748,14 @@ bias-pull-up; power-source = <0>; }; + + usb2_id: usb2-id-state { + pins = "gpio11"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; }; &qup_i2c19_default { @@ -804,6 +861,30 @@ }; }; + expander0_int: expander0-int-state { + pins = "gpio138"; + function = "gpio"; + bias-pull-up; + }; + + expander1_int: expander1-int-state { + pins = "gpio19"; + function = "gpio"; + bias-pull-up; + }; + + expander2_int: expander2-int-state { + pins = "gpio139"; + function = "gpio"; + bias-pull-up; + }; + + expander3_int: expander3-int-state { + pins = "gpio39"; + function = "gpio"; + bias-pull-up; + }; + pcie0_default_state: pcie0-default-state { clkreq-pins { pins = "gpio1"; @@ -870,6 +951,10 @@ }; }; +&uart0 { + status = "okay"; +}; + &uart10 { compatible = "qcom,geni-debug-uart"; pinctrl-0 = <&qup_uart10_default>; @@ -922,6 +1007,22 @@ status = "okay"; }; +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3_hs { + remote-endpoint = <&usb2_con_hs_ep>; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + &xo_board_clk { clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi index 8fb7d1fc6d56..31bd00546d55 100644 --- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi @@ -21,28 +21,6 @@ stdout-path = "serial0:115200n8"; }; - vreg_12p0: vreg-12p0-regulator { - compatible = "regulator-fixed"; - regulator-name = "VREG_12P0"; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vreg_5p0: vreg-5p0-regulator { - compatible = "regulator-fixed"; - regulator-name = "VREG_5P0"; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - vin-supply = <&vreg_12p0>; - }; - vreg_1p8: vreg-1p8-regulator { compatible = "regulator-fixed"; regulator-name = "VREG_1P8"; @@ -51,8 +29,6 @@ regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - - vin-supply = <&vreg_5p0>; }; vreg_1p0: vreg-1p0-regulator { @@ -75,8 +51,6 @@ regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - - vin-supply = <&vreg_12p0>; }; vreg_conn_1p8: vreg_conn_1p8 { diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi index 808827b83553..fe6e76351823 100644 --- a/arch/arm64/boot/dts/qcom/lemans.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi @@ -1512,7 +1512,7 @@ reg = <0x0 0x898000 0x0 0x4000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c20_default>; @@ -1539,7 +1539,7 @@ reg = <0x0 0x898000 0x0 0x4000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; clock-names = "se"; pinctrl-0 = <&qup_spi20_default>; @@ -1564,7 +1564,7 @@ uart20: serial@898000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00898000 0x0 0x4000>; - interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; clock-names = "se"; pinctrl-0 = <&qup_uart20_default>; @@ -2510,7 +2510,7 @@ reg = <0x0 0xa98000 0x0 0x4000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c13_default>; @@ -4270,7 +4270,14 @@ snps,dis-u1-entry-quirk; snps,dis-u2-entry-quirk; + usb-role-switch; + status = "disabled"; + + port { + usb_2_dwc3_hs: endpoint { + }; + }; }; tcsr_mutex: hwlock@1f40000 { @@ -4625,19 +4632,19 @@ opp-444000000 { opp-hz = /bits/ 64 <444000000>; - required-opps = <&rpmhpd_opp_nom>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_nom>; }; opp-533000000 { opp-hz = /bits/ 64 <533000000>; - required-opps = <&rpmhpd_opp_turbo>, + required-opps = <&rpmhpd_opp_nom>, <&rpmhpd_opp_turbo>; }; opp-560000000 { opp-hz = /bits/ 64 <560000000>; - required-opps = <&rpmhpd_opp_turbo_l1>, + required-opps = <&rpmhpd_opp_nom>, <&rpmhpd_opp_turbo_l1>; }; }; @@ -5404,8 +5411,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5492,8 +5499,8 @@ dp1_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -8575,10 +8582,10 @@ arch_timer: timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; turing-llm-tpdm { diff --git a/arch/arm64/boot/dts/qcom/mahua-crd.dts b/arch/arm64/boot/dts/qcom/mahua-crd.dts new file mode 100644 index 000000000000..9c8244e892dd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/mahua-crd.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include "mahua.dtsi" +#include "glymur-crd.dtsi" + +/delete-node/ &pmcx0102_d_e0; +/delete-node/ &pmcx0102_d0_thermal; +/delete-node/ &pmh0104_i_e0; +/delete-node/ &pmh0104_i0_thermal; +/delete-node/ &pmh0104_j_e0; +/delete-node/ &pmh0104_j0_thermal; + +/ { + model = "Qualcomm Technologies, Inc. Mahua CRD"; + compatible = "qcom,mahua-crd", "qcom,mahua"; +}; diff --git a/arch/arm64/boot/dts/qcom/mahua.dtsi b/arch/arm64/boot/dts/qcom/mahua.dtsi new file mode 100644 index 000000000000..990a02c6afc1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/mahua.dtsi @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/* Mahua is heavily based on Glymur, with some meaningful differences */ +#include "glymur.dtsi" + +/delete-node/ &bwmon_cluster2; +/delete-node/ &cluster2_pd; +/delete-node/ &cpu_map_cluster2; +/delete-node/ &cpu12; +/delete-node/ &cpu13; +/delete-node/ &cpu14; +/delete-node/ &cpu15; +/delete-node/ &cpu16; +/delete-node/ &cpu17; +/delete-node/ &cpu_pd12; +/delete-node/ &cpu_pd13; +/delete-node/ &cpu_pd14; +/delete-node/ &cpu_pd15; +/delete-node/ &cpu_pd16; +/delete-node/ &cpu_pd17; +/delete-node/ &thermal_aoss_6; +/delete-node/ &thermal_aoss_7; +/delete-node/ &thermal_cpu_2_0_0; +/delete-node/ &thermal_cpu_2_0_1; +/delete-node/ &thermal_cpu_2_1_0; +/delete-node/ &thermal_cpu_2_1_1; +/delete-node/ &thermal_cpu_2_2_0; +/delete-node/ &thermal_cpu_2_2_1; +/delete-node/ &thermal_cpu_2_3_0; +/delete-node/ &thermal_cpu_2_3_1; +/delete-node/ &thermal_cpu_2_4_0; +/delete-node/ &thermal_cpu_2_4_1; +/delete-node/ &thermal_cpu_2_5_0; +/delete-node/ &thermal_cpu_2_5_1; +/delete-node/ &thermal_cpuillc_2_1; +/delete-node/ &thermal_cpullc_2_0; +/delete-node/ &thermal_ddr_2; +/delete-node/ &thermal_gpu_3_0; +/delete-node/ &thermal_gpu_3_1; +/delete-node/ &thermal_gpu_3_2; +/delete-node/ &thermal_qmx_2_0; +/delete-node/ &thermal_qmx_2_1; +/delete-node/ &thermal_qmx_2_2; +/delete-node/ &thermal_qmx_2_3; +/delete-node/ &thermal_qmx_2_4; +/delete-node/ &thermal_video_1; +/delete-node/ &tsens6; +/delete-node/ &tsens7; + +&aggre1_noc { + compatible = "qcom,mahua-aggre1-noc", "qcom,glymur-aggre1-noc"; +}; + +&aggre2_noc { + compatible = "qcom,mahua-aggre2-noc", "qcom,glymur-aggre2-noc"; +}; + +&aggre3_noc { + compatible = "qcom,mahua-aggre3-noc", "qcom,glymur-aggre3-noc"; +}; + +&aggre4_noc { + compatible = "qcom,mahua-aggre4-noc", "qcom,glymur-aggre4-noc"; +}; + +&clk_virt { + compatible = "qcom,mahua-clk-virt", "qcom,glymur-clk-virt"; +}; + +&cnoc_main { + compatible = "qcom,mahua-cnoc-main", "qcom,glymur-cnoc-main"; +}; + +&config_noc { + compatible = "qcom,mahua-cnoc-cfg"; +}; + +&hsc_noc { + compatible = "qcom,mahua-hscnoc"; +}; + +&lpass_ag_noc { + compatible = "qcom,mahua-lpass-ag-noc", "qcom,glymur-lpass-ag-noc"; +}; + +&lpass_lpiaon_noc { + compatible = "qcom,mahua-lpass-lpiaon-noc", "qcom,glymur-lpass-lpiaon-noc"; +}; + +&lpass_lpicx_noc { + compatible = "qcom,mahua-lpass-lpicx-noc", "qcom,glymur-lpass-lpicx-noc"; +}; + +&mc_virt { + compatible = "qcom,mahua-mc-virt"; +}; + +&mmss_noc { + compatible = "qcom,mahua-mmss-noc", "qcom,glymur-mmss-noc"; +}; + +&nsi_noc { + compatible = "qcom,mahua-nsinoc", "qcom,glymur-nsinoc"; +}; + +&nsp_noc { + compatible = "qcom,mahua-nsp-noc", "qcom,glymur-nsp-noc"; +}; + +&oobm_ss_noc { + compatible = "qcom,mahua-oobm-ss-noc", "qcom,glymur-oobm-ss-noc"; +}; + +&pcie_east_anoc { + compatible = "qcom,mahua-pcie-east-anoc", "qcom,glymur-pcie-east-anoc"; +}; + +&pcie_east_slv_noc { + compatible = "qcom,mahua-pcie-east-slv-noc", "qcom,glymur-pcie-east-slv-noc"; +}; + +&pcie_west_anoc { + compatible = "qcom,mahua-pcie-west-anoc"; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_3B_WEST_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_WEST_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_6_WEST_SF_AXI_CLK>; +}; + +&pcie_west_slv_noc { + compatible = "qcom,mahua-pcie-west-slv-noc"; +}; + +&system_noc { + compatible = "qcom,mahua-system-noc", "qcom,glymur-system-noc"; +}; + +&thermal_camera_0 { + thermal-sensors = <&tsens4 9>; +}; + +&thermal_camera_1 { + thermal-sensors = <&tsens4 10>; +}; + +&thermal_ddr_1 { + thermal-sensors = <&tsens1 7>; +}; + +&thermal_gpu_0_0 { + thermal-sensors = <&tsens5 1>; +}; + +&thermal_gpu_0_1 { + thermal-sensors = <&tsens5 2>; +}; + +&thermal_gpu_0_2 { + thermal-sensors = <&tsens5 3>; +}; + +&thermal_gpu_1_0 { + thermal-sensors = <&tsens5 4>; +}; + +&thermal_gpu_1_1 { + thermal-sensors = <&tsens5 5>; +}; + +&thermal_gpu_1_2 { + thermal-sensors = <&tsens5 6>; +}; + +&thermal_gpu_2_0 { + thermal-sensors = <&tsens5 7>; +}; + +&thermal_gpu_2_1 { + thermal-sensors = <&tsens5 8>; +}; + +&thermal_gpu_2_2 { + thermal-sensors = <&tsens5 9>; +}; + +&thermal_gpuss_0 { + thermal-sensors = <&tsens5 10>; +}; + +&thermal_gpuss_1 { + thermal-sensors = <&tsens5 11>; +}; + +&thermal_nsphmx_0 { + thermal-sensors = <&tsens4 5>; +}; + +&thermal_nsphmx_1 { + thermal-sensors = <&tsens4 6>; +}; + +&thermal_nsphmx_2 { + thermal-sensors = <&tsens4 7>; +}; + +&thermal_nsphmx_3 { + thermal-sensors = <&tsens4 8>; +}; + +&thermal_nsphvx_0 { + thermal-sensors = <&tsens4 1>; +}; + +&thermal_nsphvx_1 { + thermal-sensors = <&tsens4 2>; +}; + +&thermal_nsphvx_2 { + thermal-sensors = <&tsens4 3>; +}; + +&thermal_nsphvx_3 { + thermal-sensors = <&tsens4 4>; +}; + +&thermal_video_0 { + thermal-sensors = <&tsens1 8>; +}; + +&thermal_zones { + gpuss-2-thermal { + thermal-sensors = <&tsens5 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-3-thermal { + thermal-sensors = <&tsens5 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-3-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-4-thermal { + thermal-sensors = <&tsens5 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss-4-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; +}; + +&tlmm { + compatible = "qcom,mahua-tlmm"; +}; + +&tsens4 { + #qcom,sensors = <11>; +}; + +&tsens5 { + #qcom,sensors = <15>; +}; + diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts index 52895dd9e4fa..c1899db46e71 100644 --- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts @@ -29,9 +29,19 @@ gpio-keys { compatible = "gpio-keys"; - pinctrl-0 = <&volume_up_default>; + pinctrl-0 = <&volume_up_default>, <&hall_sensor_default>; pinctrl-names = "default"; + /* Powered by the always-on vreg_l10b */ + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 70 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + key-volume-up { label = "Volume Up"; gpios = <&pm7550_gpios 6 GPIO_ACTIVE_LOW>; @@ -316,6 +326,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* Hall sensor VDD */ + regulator-always-on; }; vreg_l11b: ldo11 { @@ -529,6 +541,56 @@ }; }; +&cci0 { + status = "okay"; +}; + +&cci0_i2c0 { + /* Main cam: Sony IMX896 @ 0x1a */ + + eeprom@50 { + compatible = "puya,p24c128f", "atmel,24c128"; + reg = <0x50>; + vcc-supply = <&vreg_l6p>; + read-only; + }; + + /* Dongwoon DW9784 VCM/OIS @ 0x72 */ +}; + + +&cci0_i2c1 { + /* Awinic AW86017 VCM @ 0x0c */ + /* UW cam: OmniVision OV13B10 @ 0x36 */ + + eeprom@52 { + compatible = "puya,p24c128f", "atmel,24c128"; + reg = <0x52>; + vcc-supply = <&vreg_l6p>; + read-only; + }; +}; + +&cci1 { + /* cci1_i2c0 is not used for CCI */ + pinctrl-0 = <&cci1_1_default>; + pinctrl-1 = <&cci1_1_sleep>; + + status = "okay"; +}; + +&cci1_i2c1 { + /* Awinic AW86016 VCM @ 0x0c */ + /* Front cam: Samsung S5KKD1 @ 0x3d */ + + eeprom@51 { + compatible = "puya,p24c128f", "atmel,24c128"; + reg = <0x51>; + vcc-supply = <&vreg_l6p>; + read-only; + }; +}; + &gcc { protected-clocks = <GCC_PCIE_1_AUX_CLK>, <GCC_PCIE_1_AUX_CLK_SRC>, <GCC_PCIE_1_CFG_AHB_CLK>, <GCC_PCIE_1_MSTR_AXI_CLK>, @@ -755,6 +817,13 @@ bias-pull-up; }; + hall_sensor_default: hall-sensor-default-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + pm8008_int_default: pm8008-int-default-state { pins = "gpio125"; function = "gpio"; @@ -767,6 +836,24 @@ status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l12b>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l5f>; + vccq-max-microamp = <750000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l2b>; + vdda-pll-supply = <&vreg_l4b>; + + status = "okay"; +}; + &usb_1 { dr_mode = "otg"; diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi index e1a51d43943f..4a64a98a434b 100644 --- a/arch/arm64/boot/dts/qcom/milos.dtsi +++ b/arch/arm64/boot/dts/qcom/milos.dtsi @@ -18,7 +18,9 @@ #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> / { interrupt-parent = <&intc>; @@ -797,11 +799,13 @@ <&sleep_clk>, <0>, /* pcie_0_pipe_clk */ <0>, /* pcie_1_pipe_clk */ - <0>, /* ufs_phy_rx_symbol_0_clk */ - <0>, /* ufs_phy_rx_symbol_1_clk */ - <0>, /* ufs_phy_tx_symbol_0_clk */ + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, <0>; /* usb3_phy_wrapper_gcc_usb30_pipe_clk */ + power-domains = <&rpmhpd RPMHPD_CX>; + #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -1151,6 +1155,129 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,milos-qmp-ufs-phy"; + reg = <0x0 0x01d80000 0x0 0x2000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,milos-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&tcsr TCSR_UFS_PAD_CLKREF_EN>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_cfg SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + operating-points-v2 = <&ufs_opp_table>; + + iommus = <&apps_smmu 0x60 0>; + + dma-coherent; + + lanes-per-direction = <2>; + qcom,ice = <&ice>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + ice: crypto@1d88000 { + compatible = "qcom,milos-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x0 0x01d88000 0x0 0x18000>; + + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; @@ -1214,6 +1341,197 @@ label = "lpass"; qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0>, + <&apps_smmu 0x1063 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0>, + <&apps_smmu 0x1064 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0>, + <&apps_smmu 0x1065 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x0>, + <&apps_smmu 0x1066 0x0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x0>, + <&apps_smmu 0x1067 0x0>; + dma-coherent; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x0>, + <&apps_smmu 0x1061 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + lpass_tlmm: pinctrl@3440000 { + compatible = "qcom,milos-lpass-lpi-pinctrl"; + reg = <0x0 0x03440000 0x0 0x20000>, + <0x0 0x034d0000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", + "audio"; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <4>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <4>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + lpi_i2s2_active: lpi-i2s2-active-state { + clk-pins { + pins = "gpio10"; + function = "i2s2_clk"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + ws-pins { + pins = "gpio11"; + function = "i2s2_ws"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + data-pins { + pins = "gpio12", "gpio13"; + function = "i2s2_data"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + + lpi_i2s2_sleep: lpi-i2s2-sleep-state { + clk-pins { + pins = "gpio10"; + function = "i2s2_clk"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + ws-pins { + pins = "gpio11"; + function = "i2s2_ws"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + data-pins { + pins = "gpio12", "gpio13"; + function = "i2s2_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; }; }; @@ -1531,6 +1849,72 @@ #power-domain-cells = <1>; }; + cci0: cci@ac15000 { + compatible = "qcom,milos-cci", "qcom,msm8996-cci"; + reg = <0x0 0x0ac15000 0x0 0x1000>; + interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING 0>; + power-domains = <&camcc CAM_CC_CAMSS_TOP_GDSC>; + clocks = <&camcc CAM_CC_SOC_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>; + clock-names = "soc_ahb", + "cpas_ahb", + "cci"; + pinctrl-0 = <&cci0_0_default &cci0_1_default>; + pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac16000 { + compatible = "qcom,milos-cci", "qcom,msm8996-cci"; + reg = <0x0 0x0ac16000 0x0 0x1000>; + interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING 0>; + power-domains = <&camcc CAM_CC_CAMSS_TOP_GDSC>; + clocks = <&camcc CAM_CC_SOC_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>; + clock-names = "soc_ahb", + "cpas_ahb", + "cci"; + pinctrl-0 = <&cci1_0_default &cci1_1_default>; + pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camcc: clock-controller@adb0000 { compatible = "qcom,milos-camcc"; reg = <0x0 0x0adb0000 0x0 0x40000>; @@ -1667,6 +2051,21 @@ wakeup-parent = <&pdc>; + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio3"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c1_data_clk: qup-i2c1-data-clk-state { /* SDA, SCL */ pins = "gpio4", "gpio5"; @@ -1683,29 +2082,6 @@ bias-pull-up = <2200>; }; - qup_i2c7_data_clk: qup-i2c7-data-clk-state { - /* SDA, SCL */ - pins = "gpio32", "gpio33"; - function = "qup1_se0"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_spi0_cs: qup-spi0-cs-state { - pins = "gpio3"; - function = "qup0_se0"; - drive-strength = <6>; - bias-disable; - }; - - qup_spi0_data_clk: qup-spi0-data-clk-state { - /* MISO, MOSI, CLK */ - pins = "gpio0", "gpio1", "gpio2"; - function = "qup0_se0"; - drive-strength = <6>; - bias-disable; - }; - qup_uart5_default: qup-uart5-default-state { /* TX, RX */ pins = "gpio25", "gpio26"; @@ -1714,10 +2090,10 @@ bias-disable; }; - qup_uart11_default: qup-uart11-default-state { - /* TX, RX */ - pins = "gpio50", "gpio51"; - function = "qup1_se4"; + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; drive-strength = <2>; bias-pull-up; }; @@ -1730,6 +2106,14 @@ bias-pull-down; }; + qup_uart11_default: qup-uart11-default-state { + /* TX, RX */ + pins = "gpio50", "gpio51"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + sdc2_default: sdc2-default-state { clk-pins { pins = "gpio62"; @@ -1775,6 +2159,134 @@ bias-pull-up; }; }; + + cci0_0_default: cci0-0-default-state { + sda-pins { + pins = "gpio88"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio89"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci0_0_sleep: cci0-0-sleep-state { + sda-pins { + pins = "gpio88"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio89"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci0_1_default: cci0-1-default-state { + sda-pins { + pins = "gpio90"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio91"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci0_1_sleep: cci0-1-sleep-state { + sda-pins { + pins = "gpio90"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio91"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci1_0_default: cci1-0-default-state { + sda-pins { + pins = "gpio92"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio93"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci1_0_sleep: cci1-0-sleep-state { + sda-pins { + pins = "gpio92"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio93"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci1_1_default: cci1-1-default-state { + sda-pins { + pins = "gpio94"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio95"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci1_1_sleep: cci1-1-sleep-state { + sda-pins { + pins = "gpio94"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio95"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; }; apps_smmu: iommu@15000000 { @@ -1911,7 +2423,7 @@ gic_its: msi-controller@17140000 { compatible = "arm,gic-v3-its"; - reg = <0x0 0x17140000 0x0 0x20000>; + reg = <0x0 0x17140000 0x0 0x40000>; msi-controller; #msi-cells = <1>; @@ -2164,6 +2676,101 @@ label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0c01 0x0>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0c02 0x0>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x0c06 0x0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x0c07 0x0>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x0c08 0x0>; + dma-coherent; + }; + + /* note: secure cb9 in downstream */ + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x0c0c 0x0>; + dma-coherent; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x0c0d 0x0>; + dma-coherent; + }; + + compute-cb@14 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + iommus = <&apps_smmu 0x0c0e 0x0>; + dma-coherent; + }; + + compute-cb@15 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <15>; + iommus = <&apps_smmu 0x0c0f 0x0>; + dma-coherent; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts new file mode 100644 index 000000000000..ca14f0ea4dae --- /dev/null +++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts @@ -0,0 +1,466 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> + +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" +#include "monaco-monza-som.dtsi" + +/ { + model = "Arduino VENTUNO Q"; + compatible = "arduino,monza", "qcom,qcs8300"; + + aliases { + ethernet0 = ðernet0; + i2c1 = &i2c1; + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + button-home { + label = "Home Key"; + linux,code = <KEY_HOMEPAGE>; + gpios = <&tlmm 79 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&adv7535_out>; + }; + }; + }; + + sound { + compatible = "qcom,qcs8275-sndcard"; + model = "arduino-monza"; + audio-routing = "IN12", "Headset Mic12", + "Headset Mic12", "MICBIAS", + "IN56", "Headset Mic56", + "Headset Mic56", "MICBIAS", + "MIC1", "MICBIAS", + "Headphone", "HPL", + "Headphone", "HPR", + "Receiver", "RCVL", + "Receiver", "RCVR", + "Speaker", "SPKL", + "Speaker", "SPKR"; + + pinctrl-0 = <&quad_mi2s_active>, <&quad_mclk_active>, <&lpi_i2s4_active>; + pinctrl-names = "default"; + + pri-i2s-playback-dai-link { + link-name = "Analog Playback"; + + codec { + sound-dai = <&max98091>; + }; + + cpu { + sound-dai = <&q6apmbedai 137>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + pri-i2s-capture-dai-link { + link-name = "Analog Capture"; + + codec { + sound-dai = <&max98091>; + }; + + cpu { + sound-dai = <&q6apmbedai 138>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + hdmi-mi2s-playback-dai-link { + link-name = "HDMI Playback"; + + codec { + sound-dai = <&adv7535>; + }; + + cpu { + sound-dai = <&q6apmbedai 145>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vdc_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vdc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdc_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vdc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vdc_5v: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "vdc_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + startup-delay-us = <20000>; + }; + + vreg_nvme: regulator-3p3-m2 { + compatible = "regulator-fixed"; + regulator-name = "vreg_m2_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <20000>; + }; +}; + +ðernet0 { + phy-mode = "2500base-x"; + phy-handle = <&hsgmii_phy0>; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + hsgmii_phy0: ethernet-phy@1c { + compatible = "ethernet-phy-id004d.d101"; + reg = <0x1c>; + reset-gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&i2c12 { + clock-frequency = <400000>; + + status = "okay"; + + max98091: audio-codec@10 { + compatible = "maxim,max98091"; + reg = <0x10>; + pinctrl-0 = <&max98091_default>; + pinctrl-names = "default"; + interrupts-extended = <&tlmm 16 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_16 */ + clocks = <&q6prmcc LPASS_CLK_ID_MCLK_3 LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; + + adv7535: bridge@3d { + compatible = "adi,adv7535"; + reg = <0x3d>; + pinctrl-0 = <&adv7535_default>; + pinctrl-names = "default"; + interrupts-extended = <&tlmm 93 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&vdc_1v8>; + dvdd-supply = <&vdc_1v8>; + pvdd-supply = <&vdc_1v8>; + a2vdd-supply = <&vdc_1v8>; + v3p3-supply = <&vdc_3v3>; + v1p2-supply = <&vdc_1v8>; + adi,dsi-lanes = <4>; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7535_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7535_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp0_phy { + status = "okay"; +}; + +&mdss_dsi0 { + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&adv7535_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pcie0 { + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + vddpe-3v3-supply = <&vdc_3v3>; +}; + +&pcie1 { + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + vddpe-3v3-supply = <&vreg_nvme>; +}; + +&pcieport0 { + reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + + pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x01 0xff>; + ranges; + reg = <0x010000 0x00 0x00 0x00 0x00>; + + pci@2,0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges; + reg = <0x021000 0x00 0x00 0x00 0x00>; + + usb@0 { + compatible = "pci104c,8241"; + reg = <0 0 0 0 0>; + ti,pwron-active-high; + }; + }; + }; +}; + +&pcieport1 { + reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; +}; + +&tlmm { + pcie0_default_state: pcie0-default-state { + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio5"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio6"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + max98091_default: max98091-default-state { + pins = "gpio16"; + function = "gpio"; + bias-pull-up; + }; + + pcie1_default_state: pcie1-default-state { + wake-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio22"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio79"; + function = "gpio"; + bias-disable; + }; + + adv7535_default: adv7535-default-state { + pins = "gpio93"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +/* Internally connected to the MCU (e.g. for DFU). */ +&usb_2 { + dr_mode = "host"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/monaco-el2.dtso b/arch/arm64/boot/dts/qcom/monaco-el2.dtso new file mode 100644 index 000000000000..a7e3270f8609 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/monaco-el2.dtso @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + * + * Monaco specific modifications required to boot in EL2. + */ + +/dts-v1/; +/plugin/; + +&gpu_zap_shader { + status = "disabled"; +}; + +&iris { + status = "disabled"; +}; + +&remoteproc_adsp { + iommus = <&apps_smmu 0x2000 0x0>; +}; + +&remoteproc_cdsp { + iommus = <&apps_smmu 0x19c0 0x0400>; +}; + +&remoteproc_gpdsp { + iommus = <&apps_smmu 0x28a0 0x0>; +}; diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-camera-imx577.dtso b/arch/arm64/boot/dts/qcom/monaco-evk-camera-imx577.dtso new file mode 100644 index 000000000000..0d5ccd020e6e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/monaco-evk-camera-imx577.dtso @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/qcom,sa8775p-camcc.h> +#include <dt-bindings/gpio/gpio.h> + +&camss { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csiphy1_ep: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&imx577_ep1>; + }; + }; + }; +}; + +&cci1 { + pinctrl-0 = <&cci1_0_default>; + pinctrl-1 = <&cci1_0_sleep>; + + status = "okay"; +}; + +&cci1_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx577"; + reg = <0x1a>; + + reset-gpios = <&expander2 1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam1_default>; + pinctrl-names = "default"; + + clocks = <&camcc CAM_CC_MCLK1_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>; + assigned-clock-rates = <24000000>; + + avdd-supply = <&vreg_cam1_2p8>; + + port { + imx577_ep1: endpoint { + link-frequencies = /bits/ 64 <600000000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csiphy1_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso b/arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso new file mode 100644 index 000000000000..e6beb4393430 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + model = "Qualcomm Technologies, Inc. Monaco-EVK IFP Mezzanine"; + + vreg_0p9: regulator-0v9 { + compatible = "regulator-fixed"; + regulator-name = "VREG_0P9"; + + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_1p8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2c15 { + #address-cells = <1>; + #size-cells = <0>; + + eeprom1: eeprom@52 { + compatible = "giantec,gt24c256c", "atmel,24c256"; + reg = <0x52>; + pagesize = <64>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&pcie0 { + iommu-map = <0x0 &pcie_smmu 0x0 0x1>, + <0x100 &pcie_smmu 0x1 0x1>, + <0x208 &pcie_smmu 0x2 0x1>, + <0x210 &pcie_smmu 0x3 0x1>, + <0x218 &pcie_smmu 0x4 0x1>, + <0x300 &pcie_smmu 0x5 0x1>, + <0x400 &pcie_smmu 0x6 0x1>, + <0x500 &pcie_smmu 0x7 0x1>, + <0x501 &pcie_smmu 0x8 0x1>; +}; + +&pcieport0 { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0,0 { + compatible = "pci1179,0623"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x2 0xff>; + + vddc-supply = <&vreg_0p9>; + vdd18-supply = <&vreg_1p8>; + vdd09-supply = <&vreg_0p9>; + vddio1-supply = <&vreg_1p8>; + vddio2-supply = <&vreg_1p8>; + vddio18-supply = <&vreg_1p8>; + + i2c-parent = <&i2c15 0x77>; + + resx-gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&tc9563_resx_n>; + pinctrl-names = "default"; + + pcie@1,0 { + reg = <0x20800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x3 0xff>; + }; + + pcie@2,0 { + reg = <0x21000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x4 0xff>; + }; + + pcie@3,0 { + reg = <0x21800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x5 0xff>; + + pci@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + + pci@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + }; + }; +}; + +&tlmm { + tc9563_resx_n: tc9563-resx-state { + pins = "gpio124"; + function = "gpio"; + bias-disable; + /* Reset pin of tc9563 is active low hence set default + * state of this pin to output-high. + */ + output-high; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts index 565418b86b2a..9d17ef7d2caf 100644 --- a/arch/arm64/boot/dts/qcom/monaco-evk.dts +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts @@ -21,12 +21,32 @@ ethernet0 = ðernet0; i2c1 = &i2c1; serial0 = &uart7; + serial2 = &uart6; }; chosen { stdout-path = "serial0:115200n8"; }; + connector-2 { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + id-gpios = <&pmm8620au_0_gpios 9 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&expander6 7 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb2_vbus>; + + pinctrl-0 = <&usb2_id>; + pinctrl-names = "default"; + + port { + usb2_con_hs_ep: endpoint { + remote-endpoint = <&usb_2_dwc3_hs>; + }; + }; + }; + dmic: audio-codec-0 { compatible = "dmic-codec"; #sound-dai-cells = <0>; @@ -38,6 +58,39 @@ #sound-dai-cells = <0>; }; + dp-connector-0 { + compatible = "dp-connector"; + label = "DP0"; + type = "mini"; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <<8713sx_dp0_out>; + }; + }; + }; + + dp-connector-1 { + compatible = "dp-connector"; + label = "DP1"; + type = "mini"; + + port { + dp1_connector_in: endpoint { + remote-endpoint = <<8713sx_dp1_out>; + }; + }; + }; + + usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + gpio = <&pmm8650au_1_gpios 7 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + sound { compatible = "qcom,qcs8275-sndcard"; model = "MONACO-EVK"; @@ -77,6 +130,57 @@ }; }; }; + + vreg_cam0_2p8: vreg-cam0-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam0_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam0_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + vreg_cam1_2p8: vreg-cam1-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam1_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam1_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + vreg_cam2_2p8: vreg-cam2-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam2_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 75 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam2_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + /* This comes from a PMIC handled within the SAIL domain */ + vreg_s2s: vreg-s2s { + compatible = "regulator-fixed"; + regulator-name = "vreg_s2s"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; &apps_rsc { @@ -318,6 +422,45 @@ firmware-name = "qcom/qcs8300/a623_zap.mbn"; }; +&i2c0 { + status = "okay"; + + bridge@4f { + compatible = "lontium,lt8713sx"; + reg = <0x4f>; + reset-gpios = <&expander5 6 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt8713sx_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt8713sx_dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; + + port@2 { + reg = <2>; + + lt8713sx_dp1_out: endpoint { + remote-endpoint = <&dp1_connector_in>; + }; + }; + }; + }; +}; + &i2c1 { pinctrl-0 = <&qup_i2c1_default>; pinctrl-names = "default"; @@ -362,6 +505,11 @@ reg = <0x38>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 56 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander0_int>; + pinctrl-names = "default"; }; expander1: gpio@39 { @@ -369,6 +517,11 @@ reg = <0x39>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 16 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander1_int>; + pinctrl-names = "default"; }; expander2: gpio@3a { @@ -376,6 +529,11 @@ reg = <0x3a>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander2_int>; + pinctrl-names = "default"; }; expander3: gpio@3b { @@ -383,6 +541,11 @@ reg = <0x3b>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander3_int>; + pinctrl-names = "default"; }; expander4: gpio@3c { @@ -390,6 +553,11 @@ reg = <0x3c>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 96 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander4_int>; + pinctrl-names = "default"; }; expander5: gpio@3d { @@ -397,6 +565,11 @@ reg = <0x3d>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander5_int>; + pinctrl-names = "default"; }; expander6: gpio@3e { @@ -404,6 +577,11 @@ reg = <0x3e>; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 52 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander6_int>; + pinctrl-names = "default"; }; }; @@ -411,6 +589,30 @@ status = "okay"; }; +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <<8713sx_dp_in>; +}; + +&mdss_dp0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l4a>; + + status = "okay"; +}; + &pcie0 { pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; @@ -449,6 +651,21 @@ wake-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; }; +&pmm8620au_0_gpios { + usb2_id: usb2-id-state { + pins = "gpio9"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + +&qup_i2c0_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + &qupv3_id_0 { firmware-name = "qcom/qcs8300/qupv3fw.elf"; status = "okay"; @@ -477,6 +694,17 @@ status = "okay"; }; +&sdhc_1 { + vmmc-supply = <&vreg_l8a>; + vqmmc-supply = <&vreg_s2s>; + + no-sd; + no-sdio; + non-removable; + + status = "okay"; +}; + &serdes0 { phy-supply = <&vreg_l4a>; @@ -494,7 +722,6 @@ }; &tlmm { - pcie0_default_state: pcie0-default-state { wake-pins { pins = "gpio0"; @@ -534,6 +761,18 @@ }; }; + expander5_int: expander5-int-state { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + expander1_int: expander1-int-state { + pins = "gpio16"; + function = "gpio"; + bias-pull-up; + }; + qup_i2c1_default: qup-i2c1-state { pins = "gpio19", "gpio20"; function = "qup0_se1"; @@ -564,12 +803,67 @@ }; }; + expander3_int: expander3-int-state { + pins = "gpio24"; + function = "gpio"; + bias-pull-up; + }; + + expander6_int: expander6-int-state { + pins = "gpio52"; + function = "gpio"; + bias-pull-up; + }; + + expander0_int: expander0-int-state { + pins = "gpio56"; + function = "gpio"; + bias-pull-up; + }; + + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam1_avdd_2v8_en_default: cam1-avdd-2v8-en-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam2_avdd_2v8_en_default: cam2-avdd-2v8-en-state { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + qup_i2c15_default: qup-i2c15-state { pins = "gpio91", "gpio92"; function = "qup1_se7"; drive-strength = <2>; bias-pull-up; }; + + expander2_int: expander2-int-state { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + }; + + expander4_int: expander4-int-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; }; &uart7 { @@ -613,3 +907,19 @@ status = "okay"; }; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3_hs { + remote-endpoint = <&usb2_con_hs_ep>; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi b/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi new file mode 100644 index 000000000000..9b5ed55939b8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi @@ -0,0 +1,323 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" + +/ { + /* This comes from a PMIC handled within the SAIL domain */ + vreg_s2s: vreg-s2s { + compatible = "regulator-fixed"; + regulator-name = "vreg_s2s"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s5c: smps5 { /* LPDDR VDD2H */ + regulator-name = "vreg_s5c"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c: ldo1 { /* LPDDR VDDQ */ + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <512000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { /* LPDDR VDD2L */ + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { /* LPDDR VDD1 */ + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { /* QFPROM */ + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&mdss_dp0 { + pinctrl-0 = <&dp_hpd>; + pinctrl-names = "default"; +}; + +&mdss_dp0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l4a>; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l5a>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l4a>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs8300/a623_zap.mbn"; +}; + +&iris { + status = "okay"; +}; + +/* PCIe0 Gen4 x2 */ +&pcie0 { + iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, + <0x100 &pcie_smmu 0x0001 0x1>, + <0x200 &pcie_smmu 0x0007 0x1>, + <0x208 &pcie_smmu 0x0002 0x1>, + <0x210 &pcie_smmu 0x0003 0x1>, + <0x218 &pcie_smmu 0x0004 0x1>, + <0x300 &pcie_smmu 0x0005 0x1>, + <0x400 &pcie_smmu 0x0006 0x1>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +/* PCIe1 Gen4 x4 */ +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&qupv3_id_0 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; + + status = "okay"; +}; + +&qupv3_id_1 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; + status = "okay"; +}; + +/* There is a HW/FW issue preventing proper REFGEN hardware voting + * for the USB2 HS PHY. As a workaround, we force REFGEN to stay + * always‑on in software, matching initial bootloader config. + */ +&refgen { + regulator-always-on; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs8300/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs8300/cdsp0.mbn"; + + status = "okay"; +}; + +&remoteproc_gpdsp { + firmware-name = "qcom/qcs8300/gpdsp0.mbn"; + + status = "okay"; +}; + +/* OnSom eMMC */ +&sdhc_1 { + vmmc-supply = <&vreg_l8a>; + vqmmc-supply = <&vreg_s2s>; + + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + no-sd; + no-sdio; + non-removable; + + status = "okay"; +}; + +/* Ethernet/SGMII */ +&serdes0 { + phy-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&tlmm { + dp_hpd: dp-hpd-state { + pins = "gpio94"; + function = "edp0_hot"; + bias-disable; + }; +}; + +/* USB0 HS + SS */ +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +/* USB1 HS */ +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi index 5d2df4305d1c..a56b574d77e5 100644 --- a/arch/arm64/boot/dts/qcom/monaco.dtsi +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,qcs8300-gcc.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sa8775p-camcc.h> @@ -20,6 +21,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include <dt-bindings/thermal/thermal.h> / { @@ -2234,6 +2236,10 @@ reg = <0x0 0x016c0000 0x0 0x17080>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; }; aggre2_noc: interconnect@1700000 { @@ -2241,6 +2247,7 @@ reg = <0x0 0x01700000 0x0 0x1a080>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_IPA_CLK>; }; pcie_anoc: interconnect@1760000 { @@ -2866,6 +2873,75 @@ }; }; + lpass_tlmm: pinctrl@3440000 { + compatible = "qcom,qcs8300-lpass-lpi-pinctrl", "qcom,sm8450-lpass-lpi-pinctrl"; + reg = <0x0 0x03440000 0x0 0x20000>, + <0x0 0x034d0000 0x0 0x10000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + quad_mclk_active: quad-mclk-state { + clk-pins { + pins = "gpio5"; + function = "ext_mclk1_c"; + drive-strength = <8>; + bias-disable; + }; + }; + + quad_mi2s_active: quad-active-state { + data-pins { + pins = "gpio2", "gpio3"; + function = "qua_mi2s_data"; + drive-strength = <8>; + bias-disable; + }; + + sclk-pins { + pins = "gpio0"; + function = "qua_mi2s_sclk"; + drive-strength = <8>; + bias-disable; + }; + + ws-pins { + pins = "gpio1"; + function = "qua_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; + }; + + lpi_i2s4_active: lpi_i2s4-active-state { + data0-pins { + pins = "gpio17"; + function = "i2s4_data"; + drive-strength = <8>; + bias-disable; + }; + + clk-pins { + pins = "gpio12"; + function = "i2s4_clk"; + drive-strength = <8>; + bias-disable; + }; + + ws-pins { + pins = "gpio13"; + function = "i2s4_ws"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + lpass_ag_noc: interconnect@3c40000 { compatible = "qcom,qcs8300-lpass-ag-noc"; reg = <0x0 0x03c40000 0x0 0x17200>; @@ -4740,11 +4816,21 @@ interconnect-names = "sdhc-ddr", "cpu-sdhc"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + qcom,dll-config = <0x000f64ee>; qcom,ddr-config = <0x80040868>; + bus-width = <8>; supports-cqe; dma-coherent; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "disabled"; sdhc1_opp_table: opp-table { @@ -5103,6 +5189,7 @@ reg = <0x0 0x9100000 0x0 0xf7080>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_DDRSS_GPU_AXI_CLK>; }; llcc: system-cache-controller@9200000 { @@ -5171,9 +5258,29 @@ snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; + usb-role-switch; wakeup-source; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; usb_2: usb@a400000 { @@ -5232,7 +5339,14 @@ qcom,select-utmi-as-pipe-clk; wakeup-source; + usb-role-switch; + status = "disabled"; + + port { + usb_2_dwc3_hs: endpoint { + }; + }; }; iris: video-codec@aa00000 { @@ -5288,19 +5402,19 @@ opp-444000000 { opp-hz = /bits/ 64 <444000000>; - required-opps = <&rpmhpd_opp_nom>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_nom>; }; opp-533000000 { opp-hz = /bits/ 64 <533000000>; - required-opps = <&rpmhpd_opp_turbo>, + required-opps = <&rpmhpd_opp_nom>, <&rpmhpd_opp_turbo>; }; opp-560000000 { opp-hz = /bits/ 64 <560000000>; - required-opps = <&rpmhpd_opp_turbo_l1>, + required-opps = <&rpmhpd_opp_nom>, <&rpmhpd_opp_turbo_l1>; }; }; @@ -5319,6 +5433,117 @@ #power-domain-cells = <1>; }; + cci0: cci@ac13000 { + compatible = "qcom,qcs8300-cci", "qcom,msm8996-cci"; + reg = <0x0 0x0ac13000 0x0 0x1000>; + + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>; + clock-names = "ahb", + "cci"; + + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci0_0_default &cci0_1_default>; + pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac14000 { + compatible = "qcom,qcs8300-cci", "qcom,msm8996-cci"; + reg = <0x0 0x0ac14000 0x0 0x1000>; + + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>; + clock-names = "ahb", + "cci"; + + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci1_0_default &cci1_1_default>; + pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci2: cci@ac15000 { + compatible = "qcom,qcs8300-cci", "qcom,msm8996-cci"; + reg = <0x0 0x0ac15000 0x0 0x1000>; + + interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_2_CLK>; + clock-names = "ahb", + "cci"; + + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci2_0_default &cci2_1_default>; + pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci2_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci2_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camss: isp@ac78000 { compatible = "qcom,qcs8300-camss"; @@ -5573,9 +5798,19 @@ reg = <0>; dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; }; }; + + port@1 { + reg = <1>; + + dpu_intf1_out: endpoint { + + remote-endpoint = <&mdss_dsi0_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -5603,6 +5838,98 @@ }; }; + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,qcs8300-dsi-ctrl", + "qcom,sa8775p-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc MDSS_DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_ESC0_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + phys = <&mdss_dsi0_phy>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + refgen-supply = <&refgen>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,qcs8300-dsi-phy-5nm", + "qcom,sa8775p-dsi-phy-5nm"; + reg = <0x0 0x0ae94400 0x0 0x200>, + <0x0 0x0ae94600 0x0 0x280>, + <0x0 0x0ae94900 0x0 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + mdss_dp0_phy: phy@aec2a00 { compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy"; @@ -5697,8 +6024,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5730,7 +6057,9 @@ <&mdss_dp0_phy 0>, <&mdss_dp0_phy 1>, <0>, <0>, - <0>, <0>, <0>, <0>; + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <0>, <0>; power-domains = <&rpmhpd RPMHPD_MMCX>; #clock-cells = <1>; #reset-cells = <1>; @@ -5876,6 +6205,225 @@ #interrupt-cells = <2>; wakeup-parent = <&pdc>; + cam0_default: cam0-default-state { + pins = "gpio67"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam1_default: cam1-default-state { + pins = "gpio68"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam2_default: cam2-default-state { + pins = "gpio69"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cci0_0_default: cci0-0-default-state { + sda-pins { + pins = "gpio57"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio58"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci0_0_sleep: cci0-0-sleep-state { + sda-pins { + pins = "gpio57"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio58"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci0_1_default: cci0-1-default-state { + sda-pins { + pins = "gpio29"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio30"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci0_1_sleep: cci0-1-sleep-state { + sda-pins { + pins = "gpio29"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio30"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci1_0_default: cci1-0-default-state { + sda-pins { + pins = "gpio59"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio60"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci1_0_sleep: cci1-0-sleep-state { + sda-pins { + pins = "gpio59"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio60"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci1_1_default: cci1-1-default-state { + sda-pins { + pins = "gpio31"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio32"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci1_1_sleep: cci1-1-sleep-state { + sda-pins { + pins = "gpio31"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio32"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci2_0_default: cci2-0-default-state { + sda-pins { + pins = "gpio61"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio62"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci2_0_sleep: cci2-0-sleep-state { + sda-pins { + pins = "gpio61"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio62"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci2_1_default: cci2-1-default-state { + sda-pins { + pins = "gpio54"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio55"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci2_1_sleep: cci2-1-sleep-state { + sda-pins { + pins = "gpio54"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio55"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio94"; + function = "edp0_hot"; + bias-disable; + }; + hs0_mi2s_active: hs0-mi2s-active-state { pins = "gpio106", "gpio107", "gpio108", "gpio109"; function = "hs0_mi2s"; @@ -7192,6 +7740,55 @@ <&apps_smmu 0x1964 0x0400>; dma-coherent; }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x19c5 0x0400>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x19c6 0x0400>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x19c7 0x0400>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x19c8 0x0400>; + dma-coherent; + }; + + compute-cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&apps_smmu 0x19c9 0x0400>; + dma-coherent; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <0xb>; + iommus = <&apps_smmu 0x19cb 0x0400>; + dma-coherent; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <0xc>; + iommus = <&apps_smmu 0x19cc 0x000>; + dma-coherent; + }; }; }; }; @@ -7707,9 +8304,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts index fba68bf8bf79..aed90c8089aa 100644 --- a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts +++ b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts @@ -16,6 +16,15 @@ constant-charge-voltage-max-microvolt = <4350000>; }; +&charger { + richtek,usb-connector = <&usb_con_sm5502>; + status = "okay"; +}; + +&muic_sm5502 { + status = "okay"; +}; + &st_accel { status = "okay"; }; @@ -23,3 +32,12 @@ &st_magn { status = "okay"; }; + +&usb { + extcon = <&muic_sm5502>, <&muic_sm5502>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic_sm5502>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-coreprimeltevzw.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-coreprimeltevzw.dts new file mode 100644 index 000000000000..40415b5635ef --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-coreprimeltevzw.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-rossa-common.dtsi" + +/ { + model = "Samsung Galaxy Core Prime LTE Verizon Wireless"; + compatible = "samsung,coreprimeltevzw", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <700000>; + constant-charge-voltage-max-microvolt = <4400000>; +}; + +&charger { + richtek,usb-connector = <&usb_con_sm5502>; + status = "okay"; +}; + +&mpss_mem { + /* Firmware for coreprimeltevzw needs more space */ + reg = <0x0 0x86800000 0x0 0x5400000>; +}; + +&muic_sm5502 { + status = "okay"; +}; + +&s3fwrn5_nfc { + status = "disabled"; +}; + +&usb { + extcon = <&muic_sm5502>, <&muic_sm5502>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic_sm5502>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi index fb790b02736a..fd62e82075c4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi @@ -144,14 +144,31 @@ &blsp_i2c1 { status = "okay"; - muic: extcon@25 { + /* MUIC/extcon varies depending on model variant */ + muic_sm5504: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&muic_int_default>; + pinctrl-names = "default"; + status = "disabled"; + + usb_con_sm5504: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + + muic_sm5502: extcon@25 { compatible = "siliconmitus,sm5502-muic"; reg = <0x25>; interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&muic_int_default>; pinctrl-names = "default"; + status = "disabled"; - usb_con: connector { + usb_con_sm5502: connector { compatible = "usb-b-connector"; label = "micro-USB"; type = "micro"; @@ -298,7 +315,7 @@ charger: charger { compatible = "richtek,rt5033-charger"; monitored-battery = <&battery>; - richtek,usb-connector = <&usb_con>; + status = "disabled"; }; }; }; @@ -348,15 +365,6 @@ "AMIC3", "MIC BIAS External1"; }; -&usb { - extcon = <&muic>, <&muic>; - status = "okay"; -}; - -&usb_hs_phy { - extcon = <&muic>; -}; - &venus { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts index 677e4e286ac0..15dcfe8234d9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts @@ -86,7 +86,7 @@ charger: charger { compatible = "richtek,rt5033-charger"; monitored-battery = <&battery>; - richtek,usb-connector = <&usb_con>; + richtek,usb-connector = <&usb_con_sm5502>; }; }; }; @@ -95,3 +95,16 @@ /* Firmware for gprimeltecan needs more space */ reg = <0x0 0x86800000 0x0 0x5400000>; }; + +&muic_sm5502 { + status = "okay"; +}; + +&usb { + extcon = <&muic_sm5502>, <&muic_sm5502>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic_sm5502>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts index 582bfcb09684..268277c1caf4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts @@ -24,7 +24,25 @@ status = "okay"; }; +&charger { + richtek,usb-connector = <&usb_con_sm5502>; + status = "okay"; +}; + &mpss_mem { /* Firmware for grandprimelte needs more space */ reg = <0x0 0x86800000 0x0 0x5400000>; }; + +&muic_sm5502 { + status = "okay"; +}; + +&usb { + extcon = <&muic_sm5502>, <&muic_sm5502>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic_sm5502>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi index e33453c3e51e..5b08f0e11105 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi @@ -2,28 +2,9 @@ #include "msm8916-samsung-fortuna-common.dtsi" -/* SM5504 MUIC instead of SM5502 */ -/delete-node/ &muic; - /* IST3038 instead of Zinitix BT541 */ /delete-node/ &touchscreen; -&blsp_i2c1 { - muic: extcon@14 { - compatible = "siliconmitus,sm5504-muic"; - reg = <0x14>; - interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; - pinctrl-0 = <&muic_int_default>; - pinctrl-names = "default"; - - usb_con: connector { - compatible = "usb-b-connector"; - label = "micro-USB"; - type = "micro"; - }; - }; -}; - &blsp_i2c5 { touchscreen: touchscreen@50 { compatible = "imagis,ist3038"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts index 1981bb71f6a9..a5106afc3c59 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts @@ -16,7 +16,25 @@ constant-charge-voltage-max-microvolt = <4400000>; }; +&charger { + richtek,usb-connector = <&usb_con_sm5504>; + status = "okay"; +}; + &mpss_mem { /* Firmware for rossa needs more space */ reg = <0x0 0x86800000 0x0 0x5800000>; }; + +&muic_sm5504 { + status = "okay"; +}; + +&usb { + extcon = <&muic_sm5504>, <&muic_sm5504>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic_sm5504>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts b/arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts new file mode 100644 index 000000000000..262d9a959e6a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> + +/ { + model = "Wiko Pulp 4G"; + compatible = "wiko,chuppito", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + enable-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&button_backlight_default>; + pinctrl-names = "default"; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + label = "Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + label = "Buttons"; + + button-volume-up { + label = "Volume up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + reset-gpios = <&tlmm 120 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&mag_reset_default>; + pinctrl-names = "default"; + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + }; + + proximity@48 { + compatible = "sensortek,stk3310"; + reg = <0x48>; + interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&proximity_int_default>; + pinctrl-names = "default"; + }; + + imu@68 { + compatible = "invensense,mpu6880"; + reg = <0x68>; + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + pinctrl-0 = <&imu_int_default>; + pinctrl-names = "default"; + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "-1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@39 { + compatible = "syna,rmi4-i2c"; + reg = <0x39>; + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + syna,startup-delay-ms = <100>; + syna,reset-delay-ms = <160>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5600000>; +}; + +&pm8916_codec { + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_mpps { + pwm_out: mpp4-state { + pins = "mpp4"; + function = "digital"; + power-source = <PM8916_MPP_VPH>; + output-low; + qcom,dtest = <1>; + }; +}; + +&pm8916_pwm { + pinctrl-0 = <&pwm_out>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&sound { + audio-routing = "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2"; +}; + +&tlmm { + button_backlight_default: button-backlight-default-state { + pins = "gpio119"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio117"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + imu_int_default: imu-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio120"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + proximity_int_default: proximity-int-default-state { + pins = "gpio113"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts index 9db503e21888..4ea4fbdb5ce7 100644 --- a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts +++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts @@ -5,28 +5,13 @@ /dts-v1/; -#include <dt-bindings/arm/qcom,ids.h> -#include <dt-bindings/gpio/gpio.h> -#include "msm8917.dtsi" -#include "pm8937.dtsi" - -/delete-node/ &qseecom_mem; +#include "msm8917-xiaomi-wingtech.dtsi" / { model = "Xiaomi Redmi 5A (riva)"; compatible = "xiaomi,riva", "qcom,msm8917"; - chassis-type = "handset"; - - qcom,msm-id = <QCOM_ID_MSM8917 0>; - qcom,board-id = <0x1000b 2>, <0x2000b 2>; - pwm_backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pm8937_pwm 0 100000>; - brightness-levels = <0 255>; - num-interpolated-steps = <255>; - default-brightness-level = <128>; - }; + qcom,board-id = <0x1000b 1>, <0x1000b 2>; battery: battery { compatible = "simple-battery"; @@ -38,96 +23,18 @@ charge-term-current-microamp = <60000>; voltage-min-design-microvolt = <3400000>; }; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - stdout-path = "framebuffer0"; - - framebuffer0: framebuffer@90001000 { - compatible = "simple-framebuffer"; - reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>; - width = <720>; - height = <1280>; - stride = <(720 * 3)>; - format = "r8g8b8"; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>, - <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_BYTE0_CLK>, - <&gcc GCC_MDSS_PCLK0_CLK>, - <&gcc GCC_MDSS_ESC0_CLK>; - power-domains = <&gcc MDSS_GDSC>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&gpio_keys_default>; - pinctrl-names = "default"; - - key-volup { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; - debounce-interval = <15>; - }; - }; - - vph_pwr: regulator-vph-pwr { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - regulator-boot-on; - }; - - reserved-memory { - qseecom_mem: qseecom@84a00000 { - reg = <0x0 0x84a00000 0x0 0x1900000>; - no-map; - }; - - framebuffer_mem: memory@90001000 { - reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>; - no-map; - }; - }; -}; - -&blsp1_i2c3 { - status = "okay"; - - touchscreen@38 { - compatible = "edt,edt-ft5306"; - reg = <0x38>; - interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&tsp_int_rst_default>; - pinctrl-names = "default"; - vcc-supply = <&pm8937_l10>; - iovcc-supply = <&pm8937_l5>; - touchscreen-size-x = <720>; - touchscreen-size-y = <1280>; - }; }; &blsp2_i2c1 { status = "okay"; - bq27426@55 { + power-monitor@55 { compatible = "ti,bq27426"; reg = <0x55>; monitored-battery = <&battery>; }; - bq25601@6b { + charger@6b { compatible = "ti,bq25601"; reg = <0x6b>; interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; @@ -139,172 +46,6 @@ }; }; -&pm8937_gpios { - pwm_enable_default: pwm-enable-default-state { - pins = "gpio8"; - function = "dtest2"; - output-low; - bias-disable; - qcom,drive-strength = <2>; - }; -}; - -&pm8937_pwm { - pinctrl-0 = <&pwm_enable_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pm8937_resin { - linux,code = <KEY_VOLUMEDOWN>; - - status = "okay"; -}; - -&rpm_requests { - regulators-0 { - compatible = "qcom,rpm-pm8937-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - - vdd_l1_l19-supply = <&pm8937_s3>; - vdd_l2_l23-supply = <&pm8937_s3>; - vdd_l3-supply = <&pm8937_s3>; - vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>; - vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; - vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>; - - pm8937_s1: s1 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1225000>; - }; - - pm8937_s3: s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pm8937_s4: s4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pm8937_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8937_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8937_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8937_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8937_l8: l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - pm8937_l9: l9 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pm8937_l10: l10 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3000000>; - }; - - pm8937_l11: l11 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pm8937_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pm8937_l13: l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pm8937_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8937_l15: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8937_l16: l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8937_l17: l17 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2900000>; - }; - - pm8937_l19: l19 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1350000>; - }; - - pm8937_l22: l22 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - pm8937_l23: l23 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - }; - -}; - -&sdhc_1 { - vmmc-supply = <&pm8937_l8>; - vqmmc-supply = <&pm8937_l5>; - - status = "okay"; -}; - -&sdhc_2 { - cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>; - vmmc-supply = <&pm8937_l11>; - vqmmc-supply = <&pm8937_l12>; - pinctrl-0 = <&sdc2_default &sdc2_cd_default>; - pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - pinctrl-names = "default", "sleep"; - - status = "okay"; -}; - -&sleep_clk { - clock-frequency = <32768>; -}; - &tlmm { bq25601_int_default: bq25601-int-default-state { pins = "gpio61"; @@ -312,47 +53,4 @@ drive-strength = <2>; bias-pull-up; }; - - gpio_keys_default: gpio-keys-default-state { - pins = "gpio91"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - sdc2_cd_default: sdc2-cd-default-state { - pins = "gpio67"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - tsp_int_rst_default: tsp-int-rst-default-state { - pins = "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; -}; - -&wcnss { - vddpx-supply = <&pm8937_l5>; - - status = "okay"; -}; - -&wcnss_iris { - compatible = "qcom,wcn3620"; - vddxo-supply = <&pm8937_l7>; - vddrfa-supply = <&pm8937_l19>; - vddpa-supply = <&pm8937_l9>; - vdddig-supply = <&pm8937_l5>; -}; - -&wcnss_mem { - status = "okay"; -}; - -&xo_board { - clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-rolex.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-rolex.dts new file mode 100644 index 000000000000..f0b72d9878c4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-rolex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2026, Barnabas Czeman + */ + +/dts-v1/; + +#include "msm8917-xiaomi-wingtech.dtsi" + +/ { + model = "Xiaomi Redmi 4A (rolex)"; + compatible = "xiaomi,rolex", "qcom,msm8917"; + + qcom,board-id = <0x1000b 1>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts new file mode 100644 index 000000000000..fe844230030f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2026, Barnabas Czeman + */ + +/dts-v1/; + +#include "msm8917-xiaomi-wingtech.dtsi" + +/ { + model = "Xiaomi Redmi Go (tiare)"; + compatible = "xiaomi,tiare", "qcom,msm8917"; + + qcom,board-id = <0x1000b 1>; +}; + +&pm8937_l22 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi new file mode 100644 index 000000000000..69eda5f42c06 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023, Barnabas Czeman + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include "msm8917.dtsi" +#include "pm8937.dtsi" + +/delete-node/ &qseecom_mem; + +/ { + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_MSM8917 0>; + + pwm_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8937_pwm 0 100000>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <128>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer { + compatible = "simple-framebuffer"; + memory-region = <&framebuffer_mem>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + power-domains = <&gcc MDSS_GDSC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + key-volup { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + framebuffer_mem: memory@90001000 { + reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>; + no-map; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + edt_ft5306: touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&tsp_int_rst_default>; + pinctrl-names = "default"; + vcc-supply = <&pm8937_l10>; + iovcc-supply = <&pm8937_l5>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + status = "disabled"; + }; + + goodix_gt911: touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&tlmm 65 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&tsp_int_rst_default>; + pinctrl-names = "default"; + AVDD28-supply = <&pm8937_l10>; + VDDIO-supply = <&pm8937_l5>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + status = "disabled"; + }; +}; + +&pm8937_gpios { + pwm_enable_default: pwm-enable-default-state { + pins = "gpio8"; + function = "dtest2"; + output-low; + bias-disable; + qcom,drive-strength = <2>; + }; +}; + +&pm8937_pwm { + pinctrl-0 = <&pwm_enable_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pm8937_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8937-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + + vdd_l1_l19-supply = <&pm8937_s3>; + vdd_l2_l23-supply = <&pm8937_s3>; + vdd_l3-supply = <&pm8937_s3>; + vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>; + vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; + vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>; + + pm8937_s1: s1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pm8937_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8937_s4: s4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8937_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8937_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8937_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8937_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8937_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8937_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l19: l19 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8937_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8937_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8937_l8>; + vqmmc-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>; + vmmc-supply = <&pm8937_l11>; + vqmmc-supply = <&pm8937_l12>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32768>; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default: tsp-int-rst-default-state { + pins = "gpio64", "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&wcnss { + vddpx-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; + vddxo-supply = <&pm8937_l7>; + vddrfa-supply = <&pm8937_l19>; + vddpa-supply = <&pm8937_l9>; + vdddig-supply = <&pm8937_l5>; +}; + +&wcnss_mem { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts index 91837ff940f1..4f301e7c6517 100644 --- a/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts +++ b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts @@ -178,7 +178,7 @@ qcom,num-strings = <2>; qcom,external-pfet; qcom,current-limit-microamp = <20000>; - qcom,ovp-millivolt = <29600>; + qcom,ovp-millivolt = <29500>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts index ea90b00a2c8a..90e966242720 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts @@ -147,6 +147,20 @@ pinctrl-names = "default"; }; + light-sensor@60 { + compatible = "capella,cm36686", "vishay,vcnl4040"; + reg = <0x60>; + + interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>; + proximity-near-level = <30>; + + vdd-supply = <&pm8916_l8>; + vio-supply = <&pm8916_l6>; + + pinctrl-0 = <&light_int_default>; + pinctrl-names = "default"; + }; + imu@68 { compatible = "invensense,mpu6515"; reg = <0x68>; @@ -330,4 +344,11 @@ drive-strength = <2>; bias-disable; }; + + light_int_default: light-int-default-state { + pins = "gpio113"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts index ddd7af616794..59f873a06e4d 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts @@ -157,7 +157,7 @@ &pmi8950_wled { qcom,current-limit-microamp = <20000>; - qcom,num-strings = <2>; + qcom,num-strings = <3>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts index d46325e79917..c2a290bf493c 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts @@ -169,7 +169,7 @@ &pmi8950_wled { qcom,current-limit-microamp = <20000>; - qcom,ovp-millivolt = <29600>; + qcom,ovp-millivolt = <29500>; qcom,num-strings = <2>; qcom,external-pfet; qcom,cabc; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index 63ab564655bc..a4dcc88bb01f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -745,14 +745,7 @@ bias-pull-down; }; - mdss_te_active: mdss-te-active-state { - pins = "gpio10"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - - mdss_te_suspend: mdss-te-suspend-state { + mdss_te: mdss-te-state { pins = "gpio10"; function = "mdp_vsync"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi deleted file mode 100644 index 929bdcd45d02..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> - */ - -#include "msm8996.dtsi" - -/ { - qcom,msm-id = <246 0x30000>; -}; - - /* - * This revision seems to have differ GPU CPR - * parameters, GPU frequencies and some differences - * when it comes to voltage delivery to.. once again - * the GPU. Funnily enough, it's simpler to make it an - * overlay on top of 3.1 (the final one) than vice versa. - * The differences will show here as more and more - * features get enabled upstream. - */ - -gpu_opp_table_3_0: opp-table-gpu30 { - compatible = "operating-points-v2"; - - opp-624000000 { - opp-hz = /bits/ 64 <624000000>; - opp-level = <7>; - }; - - opp-560000000 { - opp-hz = /bits/ 64 <560000000>; - opp-level = <6>; - }; - - opp-510000000 { - opp-hz = /bits/ 64 <510000000>; - opp-level = <5>; - }; - - opp-401800000 { - opp-hz = /bits/ 64 <401800000>; - opp-level = <4>; - }; - - opp-315000000 { - opp-hz = /bits/ 64 <315000000>; - opp-level = <3>; - }; - - opp-214000000 { - opp-hz = /bits/ 64 <214000000>; - opp-level = <3>; - }; - - opp-133000000 { - opp-hz = /bits/ 64 <133000000>; - opp-level = <3>; - }; -}; - -&gpu { - operating-points-v2 = <&gpu_opp_table_3_0>; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 0386636a29f0..77ad613590a3 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -247,7 +247,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; - pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_default>; }; &mdss_dsi0_out { @@ -730,14 +730,7 @@ bias-pull-down; }; - mdss_te_default: mdss-te-default-state { - pins = "gpio10"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - - mdss_te_sleep: mdss-te-sleep-state { + mdss_te_default: mdss-te-state { pins = "gpio10"; function = "mdp_vsync"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 3c6a40212a8d..fd3a2121465b 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -104,7 +104,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; - pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_default>; panel: panel@0 { compatible = "jdi,fhd-r63452"; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 9d4ce47578fb..2f67e665996f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -3255,7 +3255,7 @@ bus-width = <4>; status = "disabled"; - }; + }; blsp1_dma: dma-controller@7544000 { compatible = "qcom,bam-v1.7.0"; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts index f8ab03f106a1..7e2ee9a4e9f0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts @@ -51,7 +51,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; - pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_default>; panel: panel@0 { compatible = "jdi,fhd-r63452"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts index 0cac06f25a77..30222f6608da 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -543,14 +543,7 @@ bias-pull-down; }; - mdss_te_active_state: mdss-te-active-state { - pins = "gpio10"; - function = "mdp_vsync_a"; - drive-strength = <2>; - bias-pull-down; - }; - - mdss_te_suspend_state: mdss-te-suspend-state { + mdss_te_state: mdss-te-state { pins = "gpio10"; function = "mdp_vsync_a"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi index d0db28336fa9..cb067adb7d17 100644 --- a/arch/arm64/boot/dts/qcom/pm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi @@ -138,7 +138,6 @@ reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; }; pm6125_gpios: gpio@c000 { diff --git a/arch/arm64/boot/dts/qcom/pm8010-kaanapali.dtsi b/arch/arm64/boot/dts/qcom/pm8010-kaanapali.dtsi new file mode 100644 index 000000000000..bfc58a6589d3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8010-kaanapali.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8010-m-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8010_m_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pm8010-n-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8010_n_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus1 { + pm8010_m_e1: pmic@c { + compatible = "qcom,pm8010", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8010_m_e1_temp_alarm: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; + + pm8010_n_e1: pmic@d { + compatible = "qcom,pm8010", "qcom,spmi-pmic"; + reg = <0xd SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8010_n_e1_temp_alarm: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmcx0102.dtsi b/arch/arm64/boot/dts/qcom/pmcx0102.dtsi new file mode 100644 index 000000000000..db2da9ef4f01 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmcx0102.dtsi @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmcx0102-c0-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmcx0102_c_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmcx0102-c1-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmcx0102_c_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmcx0102_d0_thermal: pmcx0102-d0-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmcx0102_d_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmcx0102-d1-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmcx0102_d_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + pmcx0102_c_e0: pmic@2 { + compatible = "qcom,pmcx0102", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmcx0102_c_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmcx0102_c_e0_gpios: gpio@8800 { + compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmcx0102_c_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmcx0102_d_e0: pmic@3 { + compatible = "qcom,pmcx0102", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmcx0102_d_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmcx0102_d_e0_gpios: gpio@8800 { + compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmcx0102_d_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&spmi_bus1 { + pmcx0102_c_e1: pmic@2 { + compatible = "qcom,pmcx0102", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmcx0102_c_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmcx0102_c_e1_gpios: gpio@8800 { + compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmcx0102_c_e1_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmcx0102_d_e1: pmic@3 { + compatible = "qcom,pmcx0102", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmcx0102_d_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmcx0102_d_e1_gpios: gpio@8800 { + compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmcx0102_d_e1_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmd8028-kaanapali.dtsi b/arch/arm64/boot/dts/qcom/pmd8028-kaanapali.dtsi new file mode 100644 index 000000000000..db4dc16a66e7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmd8028-kaanapali.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmd8028-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmd8028_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus1 { + pmd8028_e1: pmic@4 { + compatible = "qcom,pmd8028", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmd8028_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmd8028_e1_gpios: gpio@8800 { + compatible = "qcom,pmd8028-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmd8028_e1_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmh0101.dtsi b/arch/arm64/boot/dts/qcom/pmh0101.dtsi new file mode 100644 index 000000000000..b1ec41325958 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmh0101.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmh0101-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmh0101_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + pmic@1 { + compatible = "qcom,pmh0101", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0101_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0101_gpios: gpio@8800 { + compatible = "qcom,pmh0101-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0101_gpios 0 0 18>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmh0101_flash: led-controller@ee00 { + compatible = "qcom,pmh0101-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; + + pmh0101_pwm: pwm { + compatible = "qcom,pmh0101-pwm", "qcom,pm8350c-pwm"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi b/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi new file mode 100644 index 000000000000..7a1e5f355c17 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/{ + thermal_zones { + pmh0104_i0_thermal: pmh0104-i0-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmh0104_i_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmh0104_j0_thermal: pmh0104-j0-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmh0104_j_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmh0104-l1-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmh0104_l_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + pmh0104_i_e0: pmic@8 { + compatible = "qcom,pmh0104", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0104_i_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0104_i_e0_gpios: gpio@8800 { + compatible = "qcom,pmh0104-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0104_i_e0_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmh0104_j_e0: pmic@9 { + compatible = "qcom,pmh0104", "qcom,spmi-pmic"; + reg = <0x9 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0104_j_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0104_j_e0_gpios: gpio@8800 { + compatible = "qcom,pmh0104-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0104_j_e0_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&spmi_bus1 { + pmh0104_l_e1: pmic@b { + compatible = "qcom,pmh0104", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0104_l_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0104_l_e1_gpios: gpio@8800 { + compatible = "qcom,pmh0104-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0104_l_e1_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmh0104-kaanapali.dtsi b/arch/arm64/boot/dts/qcom/pmh0104-kaanapali.dtsi new file mode 100644 index 000000000000..d009c9a9f59e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmh0104-kaanapali.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmh0104-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmh0104_j_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus1 { + pmh0104_j_e1: pmic@9 { + compatible = "qcom,pmh0104", "qcom,spmi-pmic"; + reg = <0x9 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0104_j_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0104_j_e1_gpios: gpio@8800 { + compatible = "qcom,pmh0104-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0104_j_e1_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmh0110-glymur.dtsi b/arch/arm64/boot/dts/qcom/pmh0110-glymur.dtsi new file mode 100644 index 000000000000..7655bc030348 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmh0110-glymur.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmh0110-f0-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmh0110_f_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmh0110-f1-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmh0110_f_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmh0110-h0-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmh0110_h_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + pmh0110_f_e0: pmic@5 { + compatible = "qcom,pmh0110", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0110_f_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0110_f_e0_gpios: gpio@8800 { + compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0110_f_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmh0110_h_e0: pmic@7 { + compatible = "qcom,pmh0110", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0110_h_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0110_h_e0_gpios: gpio@8800 { + compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0110_h_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&spmi_bus1 { + pmh0110_f_e1: pmic@5 { + compatible = "qcom,pmh0110", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0110_f_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0110_f_e1_gpios: gpio@8800 { + compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0110_f_e1_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmh0110-kaanapali.dtsi b/arch/arm64/boot/dts/qcom/pmh0110-kaanapali.dtsi new file mode 100644 index 000000000000..15d9cff246b3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmh0110-kaanapali.dtsi @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: BSD-3-Clause-Clear +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmh0110-d-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmh0110_d_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmh0110-f-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmh0110_f_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmh0110-g-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmh0110_g_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmh0110-i-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmh0110_i_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + pmh0110_d_e0: pmic@3 { + compatible = "qcom,pmh0110", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0110_d_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0110_d_e0_gpios: gpio@8800 { + compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0110_d_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmh0110_f_e0: pmic@5 { + compatible = "qcom,pmh0110", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0110_f_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0110_f_e0_gpios: gpio@8800 { + compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0110_f_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmh0110_g_e0: pmic@6 { + compatible = "qcom,pmh0110", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0110_g_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0110_g_e0_gpios: gpio@8800 { + compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0110_g_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmh0110_i_e0: pmic@8 { + compatible = "qcom,pmh0110", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmh0110_i_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmh0110_i_e0_gpios: gpio@8800 { + compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmh0110_i_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmih0108-kaanapali.dtsi b/arch/arm64/boot/dts/qcom/pmih0108-kaanapali.dtsi new file mode 100644 index 000000000000..b73b0e82c3d3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmih0108-kaanapali.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmih0108-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmih0108_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus1 { + pmih0108_e1: pmic@7 { + compatible = "qcom,pmih0108", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmih0108_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmih0108_e1_gpios: gpio@8800 { + compatible = "qcom,pmih0108-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmih0108_e1_gpios 0 0 18>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmih0108_e1_eusb2_repeater: phy@fd00 { + compatible = "qcom,pm8550b-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi index 583f61fc16ad..3049eb6b46d7 100644 --- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi @@ -73,5 +73,15 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pmk8550_pwm: pwm { + compatible = "qcom,pmk8550-pwm"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmk8850.dtsi b/arch/arm64/boot/dts/qcom/pmk8850.dtsi new file mode 100644 index 000000000000..c7ba72fd48bc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmk8850.dtsi @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus0 { + pmic@0 { + compatible = "qcom,pmk8850", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8850_pon: pon@1300 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, + <0x800>; + reg-names = "hlos", + "pbs"; + + pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + }; + + pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8850_gpios: gpio@b800 { + compatible = "qcom,pmk8850-gpio", "qcom,spmi-gpio"; + reg = <0xb800>; + gpio-controller; + gpio-ranges = <&pmk8850_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmk8850_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, + <0x6200>; + reg-names = "rtc", + "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pmk8850_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmr735d-kaanapali.dtsi b/arch/arm64/boot/dts/qcom/pmr735d-kaanapali.dtsi new file mode 100644 index 000000000000..d0dd5e078cdc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmr735d-kaanapali.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmr735d-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmr735d_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus1 { + pmr735d_e1: pmic@a { + compatible = "qcom,pmr735d", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735d_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735d_e1_gpios: gpio@8800 { + compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735d_e1_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts b/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts new file mode 100644 index 000000000000..ad503beec1d3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts @@ -0,0 +1,1590 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "purwa-iot-som.dtsi" +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Qualcomm Technologies, Inc. Purwa IoT EVK"; + compatible = "qcom,purwa-iot-evk", "qcom,purwa-iot-som", "qcom,x1p42100"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart21; + serial1 = &uart14; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 5000000>; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 + 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector3 { + compatible = "usb-a-connector"; + label = "USB-3-Type-A"; + power-role = "source"; + + vbus-supply = <®ulator_usb3_vbus>; + + port { + connector_3_in: endpoint { + }; + }; + }; + + connector6 { + compatible = "usb-a-connector"; + label = "USB-6-Type-A"; + power-role = "source"; + + vbus-supply = <®ulator_usb6_vbus>; + + port { + connector_4_in: endpoint { + }; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + + connector@2 { + compatible = "usb-c-connector"; + reg = <2>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint = <&retimer_ss2_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss2_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss2_con_sbu_out>; + }; + }; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_bl_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_pcie_12v: regulator-pcie-12v { + compatible = "regulator-fixed"; + + regulator-name = "VREG_PCIE_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + + gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&pcie_x8_12v>; + pinctrl-names = "default"; + }; + + vreg_pcie_3v3: regulator-pcie-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_PCIE_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&pm_sde7_main_3p3_en>; + pinctrl-names = "default"; + }; + + vreg_pcie_3v3_aux: regulator-pcie-3v3-aux { + compatible = "regulator-fixed"; + + regulator-name = "VREG_PCIE_3P3_AUX"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&pm_sde7_aux_3p3_en>; + pinctrl-names = "default"; + }; + + /* Left unused as the retimer is not used on this board. */ + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p15: regulator-rtmr2-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p8: regulator-rtmr2-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_3p3: regulator-rtmr2-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + regulator_usb3_vbus: regulator-usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB3_VBUS"; + gpio = <&pm8550ve_9_gpios 4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb3_en>; + pinctrl-names = "default"; + enable-active-high; + regulator-always-on; + }; + + regulator_usb6_vbus: regulator-usb6-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB6_VBUS"; + gpio = <&pm8550ve_9_gpios 5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb6_en>; + pinctrl-names = "default"; + enable-active-high; + regulator-always-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the EVK mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "SDX_VPH_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wwan_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-EVK"; + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&left_woofer>, + <&left_tweeter>, + <&swr0 0>, + <&lpass_wsamacro 0>, + <&right_woofer>, + <&right_tweeter>, + <&swr3 0>, + <&lpass_wsa2macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK5>; + + vdd-supply = <&vreg_rtmr2_1p15>; + vdd33-supply = <&vreg_rtmr2_3p3>; + vdd33-cap-supply = <&vreg_rtmr2_3p3>; + vddar-supply = <&vreg_rtmr2_1p15>; + vddat-supply = <&vreg_rtmr2_1p15>; + vddio-supply = <&vreg_rtmr2_1p8>; + + reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr2_default>; + pinctrl-names = "default"; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss2_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss2_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss2_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss2_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + eusb3_repeater: redriver@47 { + compatible = "nxp,ptn3222"; + reg = <0x47>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb3_reset_n>; + pinctrl-names = "default"; + }; + + eusb5_repeater: redriver@43 { + compatible = "nxp,ptn3222"; + reg = <0x43>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb5_reset_n>; + pinctrl-names = "default"; + }; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&lpass_tlmm { + spkr_0_sd_n_active: spkr-0-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + spkr_3_sd_n_active: spkr-3-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp2 { + status = "okay"; +}; + +&mdss_dp2_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + pinctrl-0 = <&edp0_hpd_default>; + pinctrl-names = "default"; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + + backlight = <&backlight>; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; +}; + +&mdss_dp3_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie3_port0 { + vpcie12v-supply = <&vreg_pcie_12v>; + vpcie3v3-supply = <&vreg_pcie_3v3>; + vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>; + + reset-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; +}; + +&pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie5 { + vddpe-3v3-supply = <&vreg_wwan>; +}; + +&pcie5_port0 { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; +}; + +&pcie6a { + vddpe-3v3-supply = <&vreg_nvme>; +}; + +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_8_gpios { + pcie_x8_12v: pcie-12v-default-state { + pins = "gpio8"; + function = "normal"; + output-enable; + output-high; + bias-pull-down; + power-source = <0>; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb3_en: usb3-en-state { + pins = "gpio4"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-enable; + power-source = <0>; + }; + + usb6_en: usb6-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-enable; + power-source = <0>; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; + input-disable; + output-enable; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio10"; + function = "normal"; + }; + + pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state { + pins = "gpio8"; + function = "normal"; + output-enable; + bias-pull-down; + power-source = <0>; + }; + + pm_sde7_main_3p3_en: pcie-main-3p3-default-state { + pins = "gpio6"; + function = "normal"; + output-enable; + bias-pull-down; + power-source = <0>; + }; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l6b_1p8>; + + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2 { + status = "okay"; +}; + +&smb2360_2_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l8b_3p0>; +}; + +&spi11 { + status = "okay"; + + tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_0_sd_n_active>; + pinctrl-names = "default"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&swr3 { + status = "okay"; + + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_3_sd_n_active>; + pinctrl-names = "default"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&tlmm { + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + eusb3_reset_n: eusb3-reset-n-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + eusb5_reset_n: eusb5-reset-n-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr2_default: rtmr2-reset-n-active-state { + pins = "gpio185"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio71"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state { + pins = "gpio189"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state { + pins = "gpio126"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state { + pins = "gpio187"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb_1_ss0_sbu_default: usb-1-ss0-sbu-state { + mode-pins { + pins = "gpio166"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; + }; + + oe-n-pins { + pins = "gpio168"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + sel-pins { + pins = "gpio167"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcn_bt_en: wcn-bt-en-state { + pins = "gpio116"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_en: wcn-wlan-en-state { + pins = "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wwan_sw_en: wwan-sw-en-state { + pins = "gpio221"; + function = "gpio"; + drive-strength = <4>; + bias-disable; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + /* Switches USB signal routing between the USB connector and the Wi-Fi card. */ + wcn_usb_sw_n: wcn-usb-sw-n-state { + pins = "gpio225"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l2i_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_hsphy { + phys = <&smb2360_0_eusb2_repeater>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_hsphy { + phys = <&smb2360_1_eusb2_repeater>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint = <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_hsphy { + phys = <&smb2360_2_eusb2_repeater>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&retimer_ss2_ss_in>; +}; + +&usb_2_hsphy { + phys = <&eusb5_repeater>; + + pinctrl-0 = <&wcn_usb_sw_n>; + pinctrl-names = "default"; +}; + +&usb_mp_hsphy0 { + phys = <&eusb3_repeater>; +}; + +&usb_mp_hsphy1 { + phys = <&eusb6_repeater>; +}; diff --git a/arch/arm64/boot/dts/qcom/purwa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/purwa-iot-som.dtsi new file mode 100644 index 000000000000..394e65518ac5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/purwa-iot-som.dtsi @@ -0,0 +1,677 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include "purwa.dtsi" +#include "hamoa-pmics.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; +}; + +&apps_rsc { + /* PMC8380C_B */ + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p0: ldo5 { + regulator-name = "vreg_l5b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l16b_2p9: ldo16 { + regulator-name = "vreg_l16b_2p9"; + regulator-min-microvolt = <2912000>; + regulator-max-microvolt = <2912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380VE_C */ + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380_D */ + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380_E */ + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380_F */ + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380VE_I */ + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380VE_J */ + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1p42100/gen71500_zap.mbn"; +}; + +&pcie3 { + pinctrl-0 = <&pcie3_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie3_phy { + vdda-phy-supply = <&vreg_l3c_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie4 { + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie5 { + pinctrl-0 = <&pcie5_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie5_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/adsp.mbn", + "qcom/x1e80100/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/cdsp.mbn", + "qcom/x1e80100/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>; /* TPM LP & INT */ + + pcie3_default: pcie3-default-state { + clkreq-n-pins { + pins = "gpio144"; + function = "pcie3_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie5_default: pcie5-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie5_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio149"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + + }; + }; +}; + +&usb_1_ss0 { + dr_mode = "otg"; + usb-role-switch; + + status = "okay"; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss1 { + dr_mode = "otg"; + usb-role-switch; + + status = "okay"; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss2 { + dr_mode = "otg"; + usb-role-switch; + + status = "okay"; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_2 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/purwa.dtsi b/arch/arm64/boot/dts/qcom/purwa.dtsi index 2cecd2dd0de8..9ab4f26b35f2 100644 --- a/arch/arm64/boot/dts/qcom/purwa.dtsi +++ b/arch/arm64/boot/dts/qcom/purwa.dtsi @@ -20,7 +20,21 @@ /delete-node/ &gpu_opp_table; /delete-node/ &gpu_speed_bin; /delete-node/ &pcie3_phy; -/delete-node/ &thermal_zones; +/delete-node/ &thermal_aoss3; +/delete-node/ &thermal_cpu2_0_btm; +/delete-node/ &thermal_cpu2_0_top; +/delete-node/ &thermal_cpu2_1_btm; +/delete-node/ &thermal_cpu2_1_top; +/delete-node/ &thermal_cpu2_2_btm; +/delete-node/ &thermal_cpu2_2_top; +/delete-node/ &thermal_cpu2_3_btm; +/delete-node/ &thermal_cpu2_3_top; +/delete-node/ &thermal_cpuss2_btm; +/delete-node/ &thermal_cpuss2_top; +/delete-node/ &thermal_gpuss_4; +/delete-node/ &thermal_gpuss_5; +/delete-node/ &thermal_gpuss_6; +/delete-node/ &thermal_gpuss_7; &gcc { compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc"; @@ -198,557 +212,47 @@ }; }; -/* While physically present, this controller is left unconfigured and unused */ -&tsens3 { - status = "disabled"; +&thermal_camera0 { + thermal-sensors = <&tsens2 9>; }; -/ { - thermal-zones { - aoss0-thermal { - thermal-sensors = <&tsens0 0>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu0-0-top-thermal { - thermal-sensors = <&tsens0 1>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu0-0-btm-thermal { - thermal-sensors = <&tsens0 2>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu0-1-top-thermal { - thermal-sensors = <&tsens0 3>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu0-1-btm-thermal { - thermal-sensors = <&tsens0 4>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu0-2-top-thermal { - thermal-sensors = <&tsens0 5>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu0-2-btm-thermal { - thermal-sensors = <&tsens0 6>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu0-3-top-thermal { - thermal-sensors = <&tsens0 7>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu0-3-btm-thermal { - thermal-sensors = <&tsens0 8>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss0-top-thermal { - thermal-sensors = <&tsens0 9>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss0-btm-thermal { - thermal-sensors = <&tsens0 10>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - mem-thermal { - thermal-sensors = <&tsens0 11>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - video-thermal { - thermal-sensors = <&tsens0 12>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - aoss1-thermal { - thermal-sensors = <&tsens1 0>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu1-0-top-thermal { - thermal-sensors = <&tsens1 1>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu1-0-btm-thermal { - thermal-sensors = <&tsens1 2>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu1-1-top-thermal { - thermal-sensors = <&tsens1 3>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu1-1-btm-thermal { - thermal-sensors = <&tsens1 4>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu1-2-top-thermal { - thermal-sensors = <&tsens1 5>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu1-2-btm-thermal { - thermal-sensors = <&tsens1 6>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu1-3-top-thermal { - thermal-sensors = <&tsens1 7>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu1-3-btm-thermal { - thermal-sensors = <&tsens1 8>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss1-top-thermal { - thermal-sensors = <&tsens1 9>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss1-btm-thermal { - thermal-sensors = <&tsens1 10>; - - trips { - trip-point0 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - aoss2-thermal { - thermal-sensors = <&tsens2 0>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - nsp0-thermal { - thermal-sensors = <&tsens2 1>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; +&thermal_camera1 { + thermal-sensors = <&tsens2 10>; +}; - nsp1-thermal { - thermal-sensors = <&tsens2 2>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; +&thermal_gpuss_0 { + thermal-sensors = <&tsens2 5>; +}; - nsp2-thermal { - thermal-sensors = <&tsens2 3>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; +&thermal_gpuss_1 { + thermal-sensors = <&tsens2 6>; +}; - nsp3-thermal { - thermal-sensors = <&tsens2 4>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; +&thermal_gpuss_2 { + thermal-sensors = <&tsens2 7>; +}; - gpuss-0-thermal { - polling-delay-passive = <200>; - - thermal-sensors = <&tsens2 5>; - - cooling-maps { - map0 { - trip = <&gpuss0_alert0>; - cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - - trips { - gpuss0_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; +&thermal_gpuss_3 { + thermal-sensors = <&tsens2 8>; +}; - gpuss-1-thermal { - polling-delay-passive = <200>; - - thermal-sensors = <&tsens2 6>; - - cooling-maps { - map0 { - trip = <&gpuss1_alert0>; - cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - - trips { - gpuss1_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; +&thermal_nsp0 { + thermal-sensors = <&tsens2 1>; +}; - gpuss-2-thermal { - polling-delay-passive = <200>; - - thermal-sensors = <&tsens2 7>; - - cooling-maps { - map0 { - trip = <&gpuss2_alert0>; - cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - - trips { - gpuss2_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; +&thermal_nsp1 { + thermal-sensors = <&tsens2 2>; +}; - gpuss-3-thermal { - polling-delay-passive = <200>; - - thermal-sensors = <&tsens2 8>; - - cooling-maps { - map0 { - trip = <&gpuss3_alert0>; - cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - - trips { - gpuss3_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; +&thermal_nsp2 { + thermal-sensors = <&tsens2 3>; +}; - camera0-thermal { - thermal-sensors = <&tsens2 9>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; +&thermal_nsp3 { + thermal-sensors = <&tsens2 4>; +}; - camera1-thermal { - thermal-sensors = <&tsens2 10>; - - trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - trip-point1 { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - }; +/* While physically present, this controller is left unconfigured and unused */ +&tsens3 { + status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index 455e5c9bb072..04cb9230d29f 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -12,6 +12,7 @@ #include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -626,6 +627,23 @@ }; }; +&camss { + vdda-phy-supply = <&vreg_l10c>; + vdda-pll-supply = <&vreg_l6b>; + + status = "okay"; + + ports { + port@3 { + csiphy3_ep: endpoint { + data-lanes = <0 1 2 3>; + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + remote-endpoint = <&camera_s5kjn1_ep>; + }; + }; + }; +}; + &cci0 { status = "okay"; }; @@ -666,7 +684,34 @@ }; &cci1_i2c1 { - /* S5KJN1SQ03 @ 10 */ + camera@10 { + compatible = "samsung,s5kjn1"; + reg = <0x10>; + + vdda-supply = <&vreg_l3p>; + vddd-supply = <&vreg_l2p>; + vddio-supply = <&vreg_l6p>; + + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&cam_mclk3_default>; + pinctrl-names = "default"; + + orientation = <0>; /* Front facing */ + rotation = <270>; + + port { + camera_s5kjn1_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <700000000>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; eeprom@51 { compatible = "giantec,gt24p128f", "atmel,24c128"; @@ -1257,41 +1302,6 @@ */ gpio-reserved-ranges = <32 2>, <56 4>; - bluetooth_enable_default: bluetooth-enable-default-state { - pins = "gpio85"; - function = "gpio"; - output-low; - bias-disable; - }; - - disp_reset_n_active: disp-reset-n-active-state { - pins = "gpio44"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - - disp_reset_n_suspend: disp-reset-n-suspend-state { - pins = "gpio44"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - hall_sensor_default: hall-sensor-default-state { - pins = "gpio155"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - mdp_vsync: mdp-vsync-state { - pins = "gpio80"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - pm8008_int_default: pm8008-int-default-state { pins = "gpio25"; function = "gpio"; @@ -1345,9 +1355,17 @@ bias-pull-up; }; - sw_ctrl_default: sw-ctrl-default-state { - pins = "gpio86"; + disp_reset_n_active: disp-reset-n-active-state { + pins = "gpio44"; function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp_reset_n_suspend: disp-reset-n-suspend-state { + pins = "gpio44"; + function = "gpio"; + drive-strength = <2>; bias-pull-down; }; @@ -1359,12 +1377,39 @@ output-high; }; + mdp_vsync: mdp-vsync-state { + pins = "gpio80"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + bluetooth_enable_default: bluetooth-enable-default-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; + }; + aw86927_int_default: aw86927-int-default-state { pins = "gpio101"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; + + hall_sensor_default: hall-sensor-default-state { + pins = "gpio155"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart5 { diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 089a027c57d5..4c9f16cc2e4d 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -36,6 +36,7 @@ aliases { serial0 = &uart5; + serial1 = &uart7; }; pm8350c_pwm_backlight: backlight { @@ -194,6 +195,63 @@ #sound-dai-cells = <1>; }; + + wcn6750-pmu { + compatible = "qcom,wcn6750-pmu"; + pinctrl-0 = <&bt_en>; + pinctrl-names = "default"; + vddaon-supply = <&vreg_s7b_0p972>; + vddasd-supply = <&vreg_l11c_2p8>; + vddpmu-supply = <&vreg_s7b_0p972>; + vddrfa0p8-supply = <&vreg_s7b_0p972>; + vddrfa1p2-supply = <&vreg_s8b_1p272>; + vddrfa1p7-supply = <&vreg_s1b_1p872>; + vddrfa2p2-supply = <&vreg_s1c_2p19>; + + bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -695,6 +753,39 @@ status = "okay"; }; +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + &qupv3_id_0 { status = "okay"; }; @@ -920,6 +1011,59 @@ gpio-reserved-ranges = <32 2>, /* ADSP */ <48 4>; /* NFC */ + bt_en: bt-en-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + sd_cd: sd-cd-state { pins = "gpio91"; function = "gpio"; @@ -938,6 +1082,31 @@ status = "okay"; }; +&uart7 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-1 = <&qup_uart7_sleep_cts>, + <&qup_uart7_sleep_rts>, + <&qup_uart7_sleep_tx>, + <&qup_uart7_sleep_rx>; + pinctrl-names = "default", + "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + max-speed = <3200000>; + }; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l7b_2p952>; diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index 5a24c19c415e..5064ca4f1158 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -91,16 +91,6 @@ regulator-always-on; }; - vreg_12p0: regulator-vreg-12p0 { - compatible = "regulator-fixed"; - regulator-name = "VREG_12P0"; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - vreg_1p0: regulator-vreg-1p0 { compatible = "regulator-fixed"; regulator-name = "VREG_1P0"; @@ -121,8 +111,6 @@ regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - - vin-supply = <&vreg_5p0>; }; vreg_3p0: regulator-vreg-3p0 { @@ -133,20 +121,6 @@ regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - - vin-supply = <&vreg_12p0>; - }; - - vreg_5p0: regulator-vreg-5p0 { - compatible = "regulator-fixed"; - regulator-name = "VREG_5P0"; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - vin-supply = <&vreg_12p0>; }; wcn6855-pmu { @@ -655,11 +629,9 @@ }; &usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { dr_mode = "peripheral"; + + status = "okay"; }; &usb_hsphy_2 { @@ -671,11 +643,9 @@ }; &usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &ufs_mem_hc { diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso index 619a42b5ef48..83908db335af 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso @@ -5,9 +5,37 @@ /dts-v1/; /plugin/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/qcom,gcc-sc7280.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +&{/} { + + vreg_0p9: regulator-0v9 { + compatible = "regulator-fixed"; + regulator-name = "VREG_0P9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_1p8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&remoteproc_wpss { + status = "disabled"; +}; + &spi11 { #address-cells = <1>; #size-cells = <0>; @@ -19,3 +47,244 @@ spi-max-frequency = <20000000>; }; }; + +&pcie0 { + perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_reset_n>, <&pcie0_wake_n>, <&pcie0_clkreq_n>; + pinctrl-names = "default"; + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>, + <0x208 &apps_smmu 0x1c04 0x1>, + <0x210 &apps_smmu 0x1c05 0x1>, + <0x218 &apps_smmu 0x1c06 0x1>, + <0x300 &apps_smmu 0x1c07 0x1>, + <0x400 &apps_smmu 0x1c08 0x1>, + <0x500 &apps_smmu 0x1c09 0x1>, + <0x501 &apps_smmu 0x1c10 0x1>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie0_port { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0,0 { + compatible = "pci1179,0623"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x2 0xff>; + + vddc-supply = <&vreg_0p9>; + vdd18-supply = <&vreg_1p8>; + vdd09-supply = <&vreg_0p9>; + vddio1-supply = <&vreg_1p8>; + vddio2-supply = <&vreg_1p8>; + vddio18-supply = <&vreg_1p8>; + + i2c-parent = <&i2c1 0x33>; + + resx-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_tc9563_resx_n>; + pinctrl-names = "default"; + + pcie@1,0 { + reg = <0x20800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x3 0xff>; + }; + + pcie@2,0 { + reg = <0x21000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x4 0xff>; + }; + + pcie@3,0 { + reg = <0x21800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x5 0xff>; + + pci@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + + pci@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + }; + + }; +}; + +&pcie1 { + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>, + <0x208 &apps_smmu 0x1c84 0x1>, + <0x210 &apps_smmu 0x1c85 0x1>, + <0x218 &apps_smmu 0x1c86 0x1>, + <0x300 &apps_smmu 0x1c87 0x1>, + <0x408 &apps_smmu 0x1c90 0x1>, + <0x410 &apps_smmu 0x1c91 0x1>, + <0x418 &apps_smmu 0x1c92 0x1>, + <0x500 &apps_smmu 0x1c93 0x1>, + <0x600 &apps_smmu 0x1c94 0x1>, + <0x700 &apps_smmu 0x1c95 0x1>, + <0x701 &apps_smmu 0x1c96 0x1>, + <0x800 &apps_smmu 0x1c97 0x1>, + <0x900 &apps_smmu 0x1c98 0x1>, + <0x901 &apps_smmu 0x1c99 0x1>; +}; + +&pcie1_switch0_dsp1 { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0,0 { + compatible = "pci1179,0623"; + reg = <0x30000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x2 0xff>; + + vddc-supply = <&vdd_ntn_0p9>; + vdd18-supply = <&vdd_ntn_1p8>; + vdd09-supply = <&vdd_ntn_0p9>; + vddio1-supply = <&vdd_ntn_1p8>; + vddio2-supply = <&vdd_ntn_1p8>; + vddio18-supply = <&vdd_ntn_1p8>; + + i2c-parent = <&i2c1 0x77>; + + resx-gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_tc9563_resx_n>; + pinctrl-names = "default"; + + pcie@1,0 { + reg = <0x40800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x3 0xff>; + }; + + pcie@2,0 { + reg = <0x41000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x4 0xff>; + }; + + pcie@3,0 { + reg = <0x41800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x5 0xff>; + + pci@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + + pci@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + }; + }; +}; + +&tlmm { + pcie0_tc9563_resx_n: pcie0-tc9563-resx-state { + pins = "gpio78"; + function = "gpio"; + bias-disable; + input-disable; + output-enable; + }; + + pcie0_reset_n: pcie0-reset-n-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-disable; + }; + + pcie0_clkreq_n: pcie0-clkreq-n-state { + pins = "gpio88"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie0_wake_n: pcie0-wake-n-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie1_tc9563_resx_n: pcie1-tc9563-resx-state { + pins = "gpio124"; + function = "gpio"; + bias-disable; + input-disable; + output-enable; + }; + +}; + +&wifi { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index e3d2f01881ae..e393ccf1884a 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -262,6 +262,28 @@ }; }; + vreg_pcie0_1p05: regulator-pcie0-1p05v { + compatible = "regulator-fixed"; + regulator-name = "PCIE0_1.05V"; + gpio = <&pm7250b_gpios 4 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + enable-active-high; + pinctrl-0 = <&upd_pwr_en2_state>; + pinctrl-names = "default"; + }; + + vreg_pcie0_3p3: regulator-pcie0-3p3v-dual { + compatible = "regulator-fixed"; + regulator-name = "PCIE0_3.3V_Dual"; + gpio = <&pm7250b_gpios 1 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + pinctrl-0 = <&upd_pwr_en1_state>; + pinctrl-names = "default"; + }; + vdd_ntn_0p9: regulator-vdd-ntn-0p9 { compatible = "regulator-fixed"; regulator-name = "VDD_NTN_0P9"; @@ -852,7 +874,7 @@ pinctrl-0 = <&tc9563_resx_n>; pinctrl-names = "default"; - pcie@1,0 { + pcie1_switch0_dsp1: pcie@1,0 { reg = <0x20800 0x0 0x0 0x0 0x0>; #address-cells = <3>; #size-cells = <2>; @@ -870,6 +892,41 @@ device_type = "pci"; ranges; bus-range = <0x4 0xff>; + + /* Renesas μPD720201 PCIe USB3.0 Host Controller */ + usb-controller@0,0 { + compatible = "pci1912,0014"; + reg = <0x40000 0x0 0x0 0x0 0x0>; + + avdd33-supply = <&vreg_pcie0_3p3>; + vdd10-supply = <&vreg_pcie0_1p05>; + vdd33-supply = <&vreg_pcie0_3p3>; + + pinctrl-0 = <&upd_hub_rst_state>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + /* Genesys Logic GL3590 USB Hub Controller */ + gl3590_2_0: hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + reset-gpios = <&tlmm 162 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&usb_hub_reset_state>; + pinctrl-names = "default"; + + peer-hub = <&gl3590_3_0>; + }; + + gl3590_3_0: hub@2 { + compatible = "usb5e3,625"; + reg = <2>; + + peer-hub = <&gl3590_2_0>; + }; + }; }; pcie@3,0 { @@ -1198,6 +1255,17 @@ power-source = <0>; }; + upd_hub_rst_state: upd-hub-rst-state { + pins = "gpio4"; + function = "normal"; + + bias-disable; + input-disable; + output-enable; + output-high; + power-source = <0>; + }; + tc9563_resx_n: tc9563-resx-state { pins = "gpio1"; function = "normal"; @@ -1378,6 +1446,15 @@ }; &pm7250b_gpios { + upd_pwr_en1_state: upd-pwr-en1-state { + pins = "gpio1"; + function = "normal"; + + output-enable; + input-disable; + power-source = <0>; + }; + lt9611_rst_pin: lt9611-rst-state { pins = "gpio2"; function = "normal"; @@ -1386,6 +1463,15 @@ input-disable; power-source = <0>; }; + + upd_pwr_en2_state: upd-pwr-en2-state { + pins = "gpio4"; + function = "normal"; + + output-enable; + input-disable; + power-source = <0>; + }; }; &sdc2_clk { @@ -1431,6 +1517,13 @@ function = "gpio"; bias-pull-up; }; + + usb_hub_reset_state: usb-hub-reset-state { + pins = "gpio162"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; &lpass_audiocc { diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts new file mode 100644 index 000000000000..a5ad796cb65d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts @@ -0,0 +1,1093 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2026, Roger Shimizu <rosh@debian.org> + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "kodiak.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mpss_mem; +/delete-node/ &remoteproc_mpss; +/delete-node/ &remoteproc_wpss; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; +/delete-node/ &wifi; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wlan_fw_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Thundercomm AI Mini PC G1 IoT"; + compatible = "thundercomm,minipc-g1iot", "qcom,qcm6490"; + chassis-type = "desktop"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + pmic-glink { + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&redriver_usb_con_ss>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu_in: endpoint { + remote-endpoint = <&redriver_usb_con_sbu>; + }; + }; + }; + }; + }; + + lt9611_1v2: regulator-lt9611-vdd12 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + adsp_mem: adsp@86100000 { + reg = <0x0 0x86100000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88900000 { + reg = <0x0 0x88900000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@8a700000 { + reg = <0x0 0x8a700000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@8ae00000 { + reg = <0x0 0x8ae00000 0x0 0x500000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8b31a000 { + reg = <0x0 0x8b31a000 0x0 0x2000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + vdd_ntn_0p9: regulator-vdd-ntn-0p9 { + compatible = "regulator-fixed"; + regulator-name = "VDD_NTN_0P9"; + gpio = <&pm8350c_gpios 2 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <899400>; + regulator-max-microvolt = <899400>; + enable-active-high; + pinctrl-0 = <&ntn_0p9_en>; + pinctrl-names = "default"; + regulator-enable-ramp-delay = <4300>; + }; + + vdd_ntn_1p8: regulator-vdd-ntn-1p8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_NTN_1P8"; + gpio = <&pm8350c_gpios 3 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + pinctrl-0 = <&ntn_1p8_en>; + pinctrl-names = "default"; + regulator-enable-ramp-delay = <10000>; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + thermal-zones { + sdm-skin-thermal { + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; + vdd-l8-supply = <&vreg_s7b_0p972>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; + vdd-l13-supply = <&vreg_s7b_0p972>; + vdd-l14-l16-supply = <&vreg_s8b_1p272>; + + vreg_s1b_1p872: smps1 { + regulator-name = "vreg_s1b_1p872"; + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b_0p972: smps7 { + regulator-name = "vreg_s7b_0p972"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p272: smps8 { + regulator-name = "vreg_s8b_1p272"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p504: ldo3 { + regulator-name = "vreg_l3b_0p504"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p952: ldo7 { + regulator-name = "vreg_l7b_2p952"; + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_0p904: ldo8 { + regulator-name = "vreg_l8b_0p904"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p504: ldo11 { + regulator-name = "vreg_l11b_1p504"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_0p751: ldo12 { + regulator-name = "vreg_l12b_0p751"; + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_0p53: ldo13 { + regulator-name = "vreg_l13b_0p53"; + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_1p08: ldo14 { + regulator-name = "vreg_l14b_1p08"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_0p765: ldo15 { + regulator-name = "vreg_l15b_0p765"; + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_1p1: ldo16 { + regulator-name = "vreg_l16b_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p7: ldo17 { + regulator-name = "vreg_l17b_1p7"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p872>; + vdd-l2-l8-supply = <&vreg_s1b_1p872>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p972>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_2p19: smps1 { + regulator-name = "vreg_s1c_2p19"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2208000>; + }; + + vreg_s9c_1p084: smps9 { + regulator-name = "vreg_s9c_1p084"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p62: ldo2 { + regulator-name = "vreg_l2c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_2p8: ldo3 { + regulator-name = "vreg_l3c_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p62: ldo4 { + regulator-name = "vreg_l4c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p62: ldo5 { + regulator-name = "vreg_l5c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p62: ldo8 { + regulator-name = "vreg_l8c_1p62"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-name = "vreg_l11c_2p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p65: ldo12 { + regulator-name = "vreg_l12c_1p65"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p7: ldo13 { + regulator-name = "vreg_l13c_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob_3p296: bob { + regulator-name = "vreg_bob_3p296"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs6490/a660_zap.mbn"; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <&vreg_l11c_2p8>; + + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l18b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_usb_con_ss: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_phy_con_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + data-lanes = <0 1 2 3>; + }; + }; + + port@2 { + reg = <2>; + + redriver_usb_con_sbu: endpoint { + remote-endpoint = <&pmic_glink_sbu_in>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dsi { + vdda-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi_phy { + vdds-supply = <&vreg_l10c_0p88>; + + status = "okay"; +}; + +&pcie0 { + perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie0_clkreq_n>, + <&pcie0_reset_n>, + <&pcie0_wake_n>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie1_clkreq_n>, + <&pcie1_reset_n>, + <&pcie1_wake_n>; + pinctrl-names = "default"; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>, + <0x208 &apps_smmu 0x1c84 0x1>, + <0x210 &apps_smmu 0x1c85 0x1>, + <0x218 &apps_smmu 0x1c86 0x1>, + <0x300 &apps_smmu 0x1c87 0x1>, + <0x400 &apps_smmu 0x1c88 0x1>, + <0x500 &apps_smmu 0x1c89 0x1>, + <0x501 &apps_smmu 0x1c90 0x1>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie1_port0 { + pcie@0,0 { + compatible = "pci1179,0623"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x2 0xff>; + + vddc-supply = <&vdd_ntn_0p9>; + vdd18-supply = <&vdd_ntn_1p8>; + vdd09-supply = <&vdd_ntn_0p9>; + vddio1-supply = <&vdd_ntn_1p8>; + vddio2-supply = <&vdd_ntn_1p8>; + vddio18-supply = <&vdd_ntn_1p8>; + + i2c-parent = <&i2c0 0x77>; + + resx-gpios = <&pm8350c_gpios 1 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&tc9563_resx_n>; + pinctrl-names = "default"; + + pcie@1,0 { + reg = <0x20800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x3 0xff>; + }; + + pcie@2,0 { + reg = <0x21000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x4 0xff>; + }; + + pcie@3,0 { + reg = <0x21800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x5 0xff>; + + pci@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + + pci@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + }; + }; +}; + +&pm7250b_gpios { + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio2"; + function = "normal"; + + output-high; + input-disable; + power-source = <0>; + }; +}; + +&pm7325_temp_alarm { + io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>; + io-channel-names = "thermal"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + sdm-skin-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8350c_gpios { + ntn_0p9_en: ntn-0p9-en-state { + pins = "gpio2"; + function = "normal"; + + bias-disable; + input-disable; + output-enable; + power-source = <0>; + }; + + ntn_1p8_en: ntn-1p8-en-state { + pins = "gpio3"; + function = "normal"; + + bias-disable; + input-disable; + output-enable; + power-source = <0>; + }; + + tc9563_resx_n: tc9563-resx-state { + pins = "gpio1"; + function = "normal"; + + bias-disable; + input-disable; + output-enable; + power-source = <0>; + }; +}; + +&pm8350c_pwm { + nvmem = <&pmk8350_sdam_21>, + <&pmk8350_sdam_22>; + nvmem-names = "lpg_chan_sdam", + "lut_sdam"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pmk8350_vadc { + channel@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + label = "xo_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@103 { + reg = <PM7325_ADC7_DIE_TEMP>; + label = "pm7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@144 { + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_quiet_therm"; + }; + + channel@146 { + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_sdm_skin_therm"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + firmware-name = "qcom/qcs6490/qupv3fw.elf"; + + status = "okay"; +}; + +&qupv3_id_1 { + firmware-name = "qcom/qcs6490/qupv3fw.elf"; + + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs6490/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs6490/cdsp.mbn"; + + status = "okay"; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <32 2>, /* ADSP */ + <48 4>; /* NFC */ + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie0_reset_n: pcie0-reset-n-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie0_wake_n: pcie0-wake-n-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie1_reset_n: pcie1-reset-n-state { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-disable; + }; + + pcie1_wake_n: pcie1-wake-n-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_cd: sd-cd-state { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart5 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p912>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_phy_con_ss>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p952>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vccq2-supply = <&vreg_l9b_1p2>; + vccq2-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&venus { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts index 0b64a0b91202..f47efca42d48 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts @@ -755,10 +755,10 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; + port@1 { + reg = <1>; - lt9611_a: endpoint { + lt9611_b: endpoint { remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -801,7 +801,7 @@ }; &mdss_dsi0_out { - remote-endpoint = <<9611_a>; + remote-endpoint = <<9611_b>; data-lanes = <0 1 2 3>; }; diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts index c04e0ad53eec..e9a8553a8d82 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts @@ -18,12 +18,76 @@ aliases { serial0 = &uart7; mmc0 = &sdhc_1; + serial1 = &uart2; }; chosen { stdout-path = "serial0:115200n8"; }; + vreg_1p0: regulator-vreg-1p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P0"; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + vin-supply = <&vreg_1p8>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_1p8: regulator-vreg-1p8 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_5p0>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_3p0: regulator-vreg-3p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_3P0"; + + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&vreg_12p0>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_5p0: regulator-vreg-5p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_5P0"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vreg_12p0>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_12p0: regulator-vreg-12p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_12P0"; + + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + + regulator-always-on; + regulator-boot-on; + }; + dp0-connector { compatible = "dp-connector"; label = "DP0"; @@ -36,6 +100,62 @@ }; }; + dp-dsi0-connector { + compatible = "dp-connector"; + label = "DSI0"; + type = "full-size"; + + port { + dp_dsi0_connector_in: endpoint { + remote-endpoint = <&dsi2dp_bridge_out>; + }; + }; + }; + + vreg_conn_1p05: regulator-conn-1p05 { + compatible = "regulator-fixed"; + regulator-name = "vreg_conn_1p05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + vin-supply = <&vreg_conn_1p8>; + }; + + vreg_conn_1p35: regulator-conn-1p35 { + compatible = "regulator-fixed"; + regulator-name = "vreg_conn_1p35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + vin-supply = <&vreg_conn_1p8>; + }; + + vreg_conn_1p8: regulator-conn-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_conn_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <4000>; + enable-active-high; + gpio = <&pmm8650au_1_gpios 4 GPIO_ACTIVE_HIGH>; + }; + + vreg_conn_1p95: regulator-conn-1p95 { + compatible = "regulator-fixed"; + regulator-name = "vreg_conn_1p95"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + vin-supply = <&vreg_conn_1p8>; + }; + + vreg_conn_pa: regulator-conn-pa { + compatible = "regulator-fixed"; + regulator-name = "vreg_conn_pa"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <4000>; + enable-active-high; + gpio = <&pmm8650au_1_gpios 6 GPIO_ACTIVE_HIGH>; + }; + regulator-usb2-vbus { compatible = "regulator-fixed"; regulator-name = "USB2_VBUS"; @@ -45,6 +165,70 @@ enable-active-high; regulator-always-on; }; + + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + pinctrl-0 = <&wlan_en_state>; + pinctrl-names = "default"; + + vddio-supply = <&vreg_conn_pa>; + vddaon-supply = <&vreg_conn_1p8>; + vddpmu-supply = <&vreg_conn_pa>; + vddpmumx-supply = <&vreg_conn_1p8>; + vddpmucx-supply = <&vreg_conn_pa>; + /* WLAN rails: 1.05/1.35/1.95V (nominal 0.95/1.30/1.90V) */ + vddrfa0p95-supply = <&vreg_conn_1p05>; + vddrfa1p3-supply = <&vreg_conn_1p35>; + vddrfa1p9-supply = <&vreg_conn_1p95>; + vddpcie1p3-supply = <&vreg_conn_1p35>; + vddpcie1p9-supply = <&vreg_conn_1p95>; + + bt-enable-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -316,6 +500,75 @@ firmware-name = "qcom/qcs8300/a623_zap.mbn"; }; +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + io_expander: gpio@74 { + compatible = "ti,tca9539"; + reg = <0x74>; + interrupts-extended = <&tlmm 93 IRQ_TYPE_EDGE_BOTH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&tlmm 66 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&io_expander_intr_active>, + <&io_expander_reset_active>; + pinctrl-names = "default"; + }; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + bridge@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&io_expander 2 IRQ_TYPE_EDGE_FALLING>; + enable-gpios = <&io_expander 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&vreg_1p0>; + vdd18-supply = <&vreg_1p8>; + vdd33-supply = <&vreg_3p0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_bridge_in: endpoint { + + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_bridge_out: endpoint { + + remote-endpoint = <&dp_dsi0_connector_in>; + }; + }; + }; + }; + }; + }; +}; + &pmm8650au_1_gpios { usb2_en: usb2-en-state { pins = "gpio7"; @@ -363,6 +616,23 @@ &pcieport0 { reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + + qcom,calibration-variant = "QC_QCS8300_Ride"; + }; }; &pcie0_phy { @@ -391,10 +661,31 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&dsi2dp_bridge_in>; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/qcs8300/adsp.mbn"; status = "okay"; @@ -436,6 +727,12 @@ }; &tlmm { + bt_en_state: bt-en-state { + pins = "gpio55"; + function = "gpio"; + bias-pull-down; + }; + pcie0_default_state: pcie0-default-state { wake-pins { pins = "gpio0"; @@ -498,11 +795,50 @@ }; }; + io_expander_reset_active: io-expander-reset-active-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + io_expander_intr_active: io-expander-intr-active-state { + pins = "gpio93"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + dp_hot_plug_det: dp-hot-plug-det-state { pins = "gpio94"; function = "edp0_hot"; bias-disable; }; + + wlan_en_state: wlan-en-state { + pins = "gpio54"; + function = "gpio"; + bias-pull-down; + }; +}; + +&uart2 { + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6855-bt"; + firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; + max-speed = <3200000>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + }; }; &uart7 { diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index cdfe40da5d33..952d4270d118 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -1638,10 +1638,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts index 197ab6eb1666..bf088fa9807f 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> #include "agatti.dtsi" #include "pm4125.dtsi" @@ -109,6 +110,15 @@ leds = <&ledr>, <&ledg>, <&ledb>; }; + vreg_anx_30: regulator-anx-30 { + compatible = "regulator-fixed"; + regulator-name = "anx30"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + /* PM4125 charger out, supplied by VBAT */ vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -142,6 +152,86 @@ clock-frequency = <100000>; status = "okay"; + + anx7625: encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&tlmm 81 IRQ_TYPE_EDGE_FALLING>; + vdd10-supply = <&pm4125_l11>; + vdd18-supply = <&pm4125_l15>; + vdd33-supply = <&vreg_anx_30>; + analogix,audio-enable; + analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + + pinctrl-0 = <&anx7625_int_pin>, <&anx7625_cable_det_pin>; + + connector { + compatible = "usb-c-connector"; + power-role = "sink"; + data-role = "dual"; + try-power-role = "sink"; + + pd-revision = /bits/ 8 <0x03 0x00 0x00 0x00>; + op-sink-microwatt = <15000000>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + anx_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + anx_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + anx_dsi0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm4125_l5>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&anx_dsi0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; }; &pm4125_vbus { @@ -325,21 +415,13 @@ &spi5 { status = "okay"; - spidev@0 { - reg = <0>; + mcu@0 { compatible = "arduino,unoq-mcu"; - pinctrl-0 = <&spidev_cs>; - pinctrl-names = "default"; + reg = <0>; }; }; &tlmm { - spidev_cs: spidev-cs-state { - pins = "gpio17"; - function = "gpio"; - drive-strength = <16>; - }; - jmisc_gpio18: jmisc-gpio18-state { pins = "gpio18"; function = "gpio"; @@ -361,6 +443,22 @@ output-disable; }; + anx7625_cable_det_pin: anx7625-cable-det-pins-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <16>; + output-disable; + bias-pull-up; + }; + + anx7625_int_pin: anx7625-int-pins-state { + pins = "gpio81"; + function = "gpio"; + drive-strength = <16>; + output-disable; + bias-pull-up; + }; + key_volp_n: key-volp-n-state { pins = "gpio96"; function = "gpio"; @@ -428,6 +526,10 @@ status = "okay"; }; +&usb_dwc3_hs { + remote-endpoint = <&anx_hs_in>; +}; + &usb_hsphy { vdd-supply = <&pm4125_l12>; vdda-pll-supply = <&pm4125_l13>; @@ -443,6 +545,10 @@ status = "okay"; }; +&usb_qmpphy_out { + remote-endpoint = <&anx_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&pm4125_l7>; vdd-1.8-xo-supply = <&pm4125_l13>; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 9814ac4896c5..da46e9d65528 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -109,7 +109,6 @@ regulator-name = "VREG_HDMI_OUT_1P2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - vin-supply = <&vdc_1v2>; regulator-always-on; regulator-boot-on; }; @@ -119,39 +118,6 @@ regulator-name = "LT9611_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vdc_3v3>; - regulator-always-on; - regulator-boot-on; - }; - - /* Main barrel jack input */ - vdc_12v: regulator-vdc-12v { - compatible = "regulator-fixed"; - regulator-name = "DC_12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - /* 1.2V supply stepped down from the barrel jack input */ - vdc_1v2: regulator-vdc-1v2 { - compatible = "regulator-fixed"; - regulator-name = "VDC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - vin-supply = <&vdc_12v>; - regulator-always-on; - regulator-boot-on; - }; - - /* 3.3V supply stepped down from the barrel jack input */ - vdc_3v3: regulator-vdc-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdc_12v>; regulator-always-on; regulator-boot-on; }; @@ -167,23 +133,12 @@ regulator-boot-on; }; - /* "Battery" voltage for the SoM, stepped down from the barrel jack input */ - vdc_vbat_som: regulator-vdc-vbat { - compatible = "regulator-fixed"; - regulator-name = "VBAT_SOM"; - regulator-min-microvolt = <4200000>; - regulator-max-microvolt = <4200000>; - regulator-always-on; - regulator-boot-on; - }; - /* PM2250 charger out, supplied by VBAT */ vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; - vin-supply = <&vdc_vbat_som>; regulator-always-on; regulator-boot-on; @@ -235,6 +190,42 @@ }; }; }; + + wcn3950-pmu { + compatible = "qcom,wcn3950-pmu"; + + pinctrl-0 = <&sw_ctrl_default>; + pinctrl-names = "default"; + + vddio-supply = <&pm4125_l15>; + vddxo-supply = <&pm4125_l13>; + vddrf-supply = <&pm4125_l10>; + vddch0-supply = <&pm4125_l22>; + + swctrl-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_io: ldo0 { + regulator-name = "vreg_pmu_io"; + }; + + vreg_pmu_xo: ldo1 { + regulator-name = "vreg_pmu_xo"; + }; + + vreg_pmu_rf: ldo2 { + regulator-name = "vreg_pmu_rf"; + }; + + vreg_pmu_ch0: ldo3 { + regulator-name = "vreg_pmu_ch0"; + }; + + vreg_pmu_ch1: ldo4 { + regulator-name = "vreg_pmu_ch1"; + }; + }; + }; }; &cpu_pd0 { @@ -754,6 +745,12 @@ bias-disable; }; + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio87"; + function = "gpio"; + bias-pull-down; + }; + sd_det_in_on: sd-det-in-on-state { pins = "gpio88"; function = "gpio"; @@ -789,11 +786,10 @@ bluetooth { compatible = "qcom,wcn3950-bt"; - vddio-supply = <&pm4125_l15>; - vddxo-supply = <&pm4125_l13>; - vddrf-supply = <&pm4125_l10>; - vddch0-supply = <&pm4125_l22>; - enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + vddio-supply = <&vreg_pmu_io>; + vddxo-supply = <&vreg_pmu_xo>; + vddrf-supply = <&vreg_pmu_rf>; + vddch0-supply = <&vreg_pmu_ch0>; max-speed = <3200000>; }; }; @@ -834,10 +830,13 @@ }; &wifi { + /* SoC */ vdd-0.8-cx-mx-supply = <&pm4125_l7>; - vdd-1.8-xo-supply = <&pm4125_l13>; - vdd-1.3-rfa-supply = <&pm4125_l10>; - vdd-3.3-ch0-supply = <&pm4125_l22>; + + /* WiFi / BT PMU */ + vdd-1.8-xo-supply = <&vreg_pmu_xo>; + vdd-1.3-rfa-supply = <&vreg_pmu_rf>; + vdd-3.3-ch0-supply = <&vreg_pmu_ch0>; qcom,calibration-variant = "Thundercomm_RB1"; firmware-name = "qcm2290"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 5f8613150bdd..1203172729fa 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -158,7 +158,6 @@ regulator-name = "VREG_HDMI_OUT_1P2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - vin-supply = <&vdc_1v2>; regulator-always-on; regulator-boot-on; }; @@ -168,39 +167,6 @@ regulator-name = "LT9611_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vdc_3v3>; - regulator-always-on; - regulator-boot-on; - }; - - /* Main barrel jack input */ - vdc_12v: regulator-vdc-12v { - compatible = "regulator-fixed"; - regulator-name = "DC_12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - /* 1.2V supply stepped down from the barrel jack input */ - vdc_1v2: regulator-vdc-1v2 { - compatible = "regulator-fixed"; - regulator-name = "VDC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - vin-supply = <&vdc_12v>; - regulator-always-on; - regulator-boot-on; - }; - - /* 3.3V supply stepped down from the barrel jack input */ - vdc_3v3: regulator-vdc-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdc_12v>; regulator-always-on; regulator-boot-on; }; @@ -216,27 +182,52 @@ regulator-boot-on; }; - /* "Battery" voltage for the SoM, stepped down from the barrel jack input */ - vdc_vbat_som: regulator-vdc-vbat { - compatible = "regulator-fixed"; - regulator-name = "VBAT_SOM"; - regulator-min-microvolt = <4200000>; - regulator-max-microvolt = <4200000>; - regulator-always-on; - regulator-boot-on; - }; - /* PMI632 charger out, supplied by VBAT */ vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; - vin-supply = <&vdc_vbat_som>; regulator-always-on; regulator-boot-on; }; + + wcn3988-pmu { + compatible = "qcom,wcn3988-pmu"; + + pinctrl-0 = <&sw_ctrl_default>; + pinctrl-names = "default"; + + vddio-supply = <&vreg_l9a_1p8>; + vddxo-supply = <&vreg_l16a_1p3>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l23a_3p3>; + + swctrl-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_io: ldo0 { + regulator-name = "vreg_pmu_io"; + }; + + vreg_pmu_xo: ldo1 { + regulator-name = "vreg_pmu_xo"; + }; + + vreg_pmu_rf: ldo2 { + regulator-name = "vreg_pmu_rf"; + }; + + vreg_pmu_ch0: ldo3 { + regulator-name = "vreg_pmu_ch0"; + }; + + vreg_pmu_ch1: ldo4 { + regulator-name = "vreg_pmu_ch1"; + }; + }; + }; }; &gpi_dma0 { @@ -684,6 +675,12 @@ bias-disable; }; + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio87"; + function = "gpio"; + bias-pull-down; + }; + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio88"; function = "gpio"; @@ -703,11 +700,10 @@ bluetooth { compatible = "qcom,wcn3988-bt"; - vddio-supply = <&vreg_l9a_1p8>; - vddxo-supply = <&vreg_l16a_1p3>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l23a_3p3>; - enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + vddio-supply = <&vreg_pmu_io>; + vddxo-supply = <&vreg_pmu_xo>; + vddrf-supply = <&vreg_pmu_rf>; + vddch0-supply = <&vreg_pmu_ch0>; max-speed = <3200000>; }; }; @@ -744,10 +740,13 @@ }; &wifi { + /* SoC */ vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>; - vdd-1.8-xo-supply = <&vreg_l16a_1p3>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l23a_3p3>; + + /* WiFi / BT PMU */ + vdd-1.8-xo-supply = <&vreg_pmu_xo>; + vdd-1.3-rfa-supply = <&vreg_pmu_rf>; + vdd-3.3-ch0-supply = <&vreg_pmu_ch0>; qcom,calibration-variant = "Thundercomm_RB2"; firmware-name = "qrb4210"; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 71b42e76f03d..54da0d759a67 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -38,14 +38,6 @@ clock-frequency = <40000000>; }; - dc12v: dc12v-regulator { - compatible = "regulator-fixed"; - regulator-name = "DC12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -92,7 +84,7 @@ compatible = "regulator-fixed"; regulator-name = "LT9611_1V2"; - vin-supply = <&vdc_3v3>; + vin-supply = <&vreg_l11c_3p3>; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; @@ -101,7 +93,7 @@ compatible = "regulator-fixed"; regulator-name = "LT9611_3V3"; - vin-supply = <&vdc_3v3>; + vin-supply = <&vreg_l11c_3p3>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -231,33 +223,6 @@ }; }; - vbat: vbat-regulator { - compatible = "regulator-fixed"; - regulator-name = "VBAT"; - vin-supply = <&vreg_l11c_3p3>; - regulator-min-microvolt = <4200000>; - regulator-max-microvolt = <4200000>; - regulator-always-on; - }; - - vbat_som: vbat-som-regulator { - compatible = "regulator-fixed"; - regulator-name = "VBAT_SOM"; - vin-supply = <&dc12v>; - regulator-min-microvolt = <4200000>; - regulator-max-microvolt = <4200000>; - regulator-always-on; - }; - - vdc_3v3: vdc-3v3-regulator { - compatible = "regulator-fixed"; - regulator-name = "VDC_3V3"; - vin-supply = <&vreg_l11c_3p3>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - vdc_5v: vdc-5v-regulator { compatible = "regulator-fixed"; regulator-name = "VDC_5V"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts b/arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file mode 100644 index 000000000000..b84da371581b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts @@ -0,0 +1,616 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc7180.dtsi" + +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &tz_mem; +/delete-node/ &ipa_fw_mem; + +/ { + model = "ECS LIVA QC710"; + compatible = "ecs,liva-qc710", "qcom,sc7180"; + chassis-type = "desktop"; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + wifi0 = &wifi; + }; + + hdmi-bridge { + compatible = "algoltek,ag6311"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_bridge_dp_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_out>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_bridge_tmds_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_bridge_tmds_out>; + }; + }; + }; + + reserved-memory { + gpu_mem: zap-shader@80840000 { + reg = <0x0 0x80840000 0 0x2000>; + no-map; + }; + + venus_mem: venus@85b00000 { + reg = <0x0 0x85b00000 0 0x500000>; + no-map; + }; + + mpss_mem: mpss@86000000 { + reg = <0x0 0x86000000 0x0 0x2000000>; + no-map; + }; + + adsp_mem: adsp@8e400000 { + reg = <0x0 0x8e400000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: wlan@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + }; + + usb_a_connector: usb-a-connector { + compatible = "usb-a-connector"; + + port { + usb_a_connector_ss_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_out>; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l4a_0p8: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_0p6: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p8: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_2p9: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sc7180/ecs/liva-qc710/qcdxkmsuc7180.mbn"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; +}; + +&pm6150_rtc { + qcom,uefi-rtc-info; + + status = "okay"; +}; + +&qfprom { + vcc-supply = <&vreg_l11a_1p8>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc7180/ecs/liva-qc710/qcadsp7180.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sc7180/ecs/liva-qc710/qcmpss7180_nm.mbn"; + + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l19a_2p9>; + vqmmc-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + + cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&tlmm { + /* + * The TZ seem to protect those because some boards can have + * fingerprint sensor connected to this range. Not connected + * on this board + */ + gpio-reserved-ranges = <58 5>; + + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + function = "gpio"; + bias-pull-down; + }; + + rts-pins { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + function = "gpio"; + bias-pull-down; + }; + + tx-pins { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + function = "gpio"; + bias-pull-up; + }; + + rx-pins { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + function = "gpio"; + bias-pull-up; + }; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <16>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; +&uart3 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + }; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb5e3,608"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* @1: 3.0 Type-A port on the back + * @2: 2.0 Type-A port the side + * @3: 2.0 Type-C port on the back + */ + + ethernet@4 { + compatible = "usbbda,8152"; + reg = <4>; + }; + }; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p8>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l4a_0p8>; + + /delete-property/ mode-switch; + /delete-property/ orientation-switch; + + status = "okay"; + + ports { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + /delete-node/ endpoint; + + usb_1_qmpphy_dp_out: endpoint@0 { + reg = <0>; + + data-lanes = <3 2>; + remote-endpoint = <&hdmi_bridge_dp_in>; + }; + + usb_1_qmpphy_usb_ss_out: endpoint@1 { + reg = <1>; + + data-lanes = <1 0>; + remote-endpoint = <&usb_a_connector_ss_in>; + }; + }; + }; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp_out>; +}; + +&venus { + firmware-name = "qcom/sc7180/ecs/liva-qc710/qcvss7180.mbn"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; + vdd-1.8-xo-supply = <&vreg_l1c_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; + + qcom,calibration-variant = "ECS_QC710"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 45b9864e3304..a4b17564469e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1646,6 +1646,8 @@ qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; + sram = <&ipa_modem_tables>; + status = "disabled"; }; @@ -3460,8 +3462,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -3587,6 +3589,10 @@ ranges = <0 0 0x14680000 0x2e000>; + ipa_modem_tables: modem-tables@28000 { + reg = <0x28000 0x2000>; + }; + pil-reloc@2a94c { compatible = "qcom,pil-reloc-info"; reg = <0x2a94c 0xc8>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 617a39d32488..debf62baec9b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -140,17 +140,6 @@ dma-coherent; }; -&venus { - iommus = <&apps_smmu 0x2180 0x20>, - <&apps_smmu 0x2184 0x20>; - - status = "okay"; - - video-firmware { - iommus = <&apps_smmu 0x21a2 0x0>; - }; -}; - &watchdog { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 8319d892c6e4..f45deb188c6c 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -3322,8 +3322,8 @@ dp0_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -3404,8 +3404,8 @@ dp1_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -3480,8 +3480,8 @@ edp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 706eb1309d3f..761f229e8f47 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> @@ -4652,13 +4653,31 @@ port@0 { reg = <0>; + mdss0_intf0_out: endpoint { remote-endpoint = <&mdss0_dp0_in>; }; }; + port@1 { + reg = <1>; + + mdss0_intf1_out: endpoint { + remote-endpoint = <&mdss0_dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + + mdss0_intf2_out: endpoint { + remote-endpoint = <&mdss0_dsi1_in>; + }; + }; + port@4 { reg = <4>; + mdss0_intf4_out: endpoint { remote-endpoint = <&mdss0_dp1_in>; }; @@ -4666,6 +4685,7 @@ port@5 { reg = <5>; + mdss0_intf5_out: endpoint { remote-endpoint = <&mdss0_dp3_in>; }; @@ -4673,6 +4693,7 @@ port@6 { reg = <6>; + mdss0_intf6_out: endpoint { remote-endpoint = <&mdss0_dp2_in>; }; @@ -4769,8 +4790,8 @@ mdss0_dp0_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -4791,6 +4812,189 @@ }; }; + mdss0_dsi0: dsi@ae94000 { + compatible = "qcom,sc8280xp-dsi-ctrl", + "qcom,sa8775p-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss0>; + interrupts = <4>; + + clocks = <&dispcc0 DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc0 DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc0 DISP_CC_MDSS_ESC0_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + refgen-supply = <&refgen>; + + phys = <&mdss0_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dsi0_in: endpoint { + remote-endpoint = <&mdss0_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss0_dsi0_phy: phy@ae94400 { + compatible = "qcom,sc8280xp-dsi-phy-5nm", + "qcom,sa8775p-dsi-phy-5nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss0_dsi1: dsi@ae96000 { + compatible = "qcom,sc8280xp-dsi-ctrl", + "qcom,sa8775p-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss0>; + interrupts = <5>; + + clocks = <&dispcc0 DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc0 DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc0 DISP_CC_MDSS_ESC1_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + refgen-supply = <&refgen>; + + phys = <&mdss0_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dsi1_in: endpoint { + remote-endpoint = <&mdss0_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss0_dsi1_phy: phy@ae96400 { + compatible = "qcom,sc8280xp-dsi-phy-5nm", + "qcom,sa8775p-dsi-phy-5nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + mdss0_dp1: displayport-controller@ae98000 { compatible = "qcom,sc8280xp-dp"; reg = <0 0xae98000 0 0x200>, @@ -4851,8 +5055,8 @@ mdss0_dp1_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -4931,8 +5135,8 @@ mdss0_dp2_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5006,8 +5210,8 @@ mdss0_dp3_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5080,10 +5284,10 @@ <&mdss0_dp2_phy 1>, <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>, - <0>, - <0>, - <0>, - <0>; + <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>; power-domains = <&rpmhpd SC8280XP_MMCX>; #clock-cells = <1>; @@ -6011,13 +6215,31 @@ port@0 { reg = <0>; + mdss1_intf0_out: endpoint { remote-endpoint = <&mdss1_dp0_in>; }; }; + port@1 { + reg = <1>; + + mdss1_intf1_out: endpoint { + remote-endpoint = <&mdss1_dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + + mdss1_intf2_out: endpoint { + remote-endpoint = <&mdss1_dsi1_in>; + }; + }; + port@4 { reg = <4>; + mdss1_intf4_out: endpoint { remote-endpoint = <&mdss1_dp1_in>; }; @@ -6025,6 +6247,7 @@ port@5 { reg = <5>; + mdss1_intf5_out: endpoint { remote-endpoint = <&mdss1_dp3_in>; }; @@ -6032,6 +6255,7 @@ port@6 { reg = <6>; + mdss1_intf6_out: endpoint { remote-endpoint = <&mdss1_dp2_in>; }; @@ -6125,8 +6349,8 @@ mdss1_dp0_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -6147,6 +6371,170 @@ }; }; + mdss1_dsi0: dsi@22094000 { + compatible = "qcom,sc8280xp-dsi-ctrl", + "qcom,sa8775p-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x22094000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss1>; + interrupts = <4>; + + clocks = <&dispcc1 DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc1 DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc1 DISP_CC_MDSS_ESC0_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss1_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + refgen-supply = <&refgen>; + + phys = <&mdss1_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss1_dsi0_in: endpoint { + remote-endpoint = <&mdss1_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss1_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss1_dsi0_phy: phy@22094400 { + compatible = "qcom,sc8280xp-dsi-phy-5nm", + "qcom,sa8775p-dsi-phy-5nm"; + reg = <0 0x22094400 0 0x200>, + <0 0x22094600 0 0x280>, + <0 0x22094900 0 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss1_dsi1: dsi@22096000 { + compatible = "qcom,sc8280xp-dsi-ctrl", + "qcom,sa8775p-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x22096000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss1>; + interrupts = <5>; + + clocks = <&dispcc1 DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc1 DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc1 DISP_CC_MDSS_ESC1_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss1_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss1_dsi1_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + refgen-supply = <&refgen>; + + phys = <&mdss1_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss1_dsi1_in: endpoint { + remote-endpoint = <&mdss1_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss1_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss1_dsi1_phy: phy@22096400 { + compatible = "qcom,sc8280xp-dsi-phy-5nm", + "qcom,sa8775p-dsi-phy-5nm"; + reg = <0 0x22096400 0 0x200>, + <0 0x22096600 0 0x280>, + <0 0x22096900 0 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + mdss1_dp1: displayport-controller@22098000 { compatible = "qcom,sc8280xp-dp"; reg = <0 0x22098000 0 0x200>, @@ -6205,8 +6593,8 @@ mdss1_dp1_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -6285,8 +6673,8 @@ mdss1_dp2_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -6360,8 +6748,8 @@ mdss1_dp3_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -6434,10 +6822,10 @@ <&mdss1_dp2_phy 1>, <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>, - <0>, - <0>, - <0>, - <0>; + <&mdss1_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss1_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss1_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss1_dsi1_phy DSI_PIXEL_PLL_CLK>; power-domains = <&rpmhpd SC8280XP_MMCX>; #clock-cells = <1>; @@ -6652,9 +7040,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 74cb29cb7f1a..9e14f53b552e 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -108,6 +108,43 @@ regulator-always-on; regulator-boot-on; }; + + wcn3990-pmu { + compatible = "qcom,wcn3990-pmu"; + + pinctrl-0 = <&sw_ctrl_default>; + pinctrl-names = "default"; + + vddio-supply = <&vreg_l13a_1p8>; + vddxo-supply = <&vreg_l9a_1p8>; + vddrf-supply = <&vreg_l6a_1p3>; + vddch0-supply = <&vreg_l19a_3p3>; + vddch1-supply = <&vreg_l8b_3p3>; + + swctrl-gpios = <&pm660_gpios 5 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_io: ldo0 { + regulator-name = "vreg_pmu_io"; + }; + + vreg_pmu_xo: ldo1 { + regulator-name = "vreg_pmu_xo"; + }; + + vreg_pmu_rf: ldo2 { + regulator-name = "vreg_pmu_rf"; + }; + + vreg_pmu_ch0: ldo3 { + regulator-name = "vreg_pmu_ch0"; + }; + + vreg_pmu_ch1: ldo4 { + regulator-name = "vreg_pmu_ch1"; + }; + }; + }; }; &adreno_gpu { @@ -197,10 +234,10 @@ bluetooth { compatible = "qcom,wcn3990-bt"; - vddio-supply = <&vreg_l13a_1p8>; - vddxo-supply = <&vreg_l9a_1p8>; - vddrf-supply = <&vreg_l6a_1p3>; - vddch0-supply = <&vreg_l19a_3p3>; + vddio-supply = <&vreg_pmu_io>; + vddxo-supply = <&vreg_pmu_xo>; + vddrf-supply = <&vreg_pmu_rf>; + vddch0-supply = <&vreg_pmu_ch0>; max-speed = <3200000>; }; }; @@ -238,6 +275,16 @@ linux,code = <KEY_VOLUMEUP>; }; +&pm660_gpios { + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio5"; + function = "normal"; + + input-enable; + bias-pull-down; + }; +}; + &qusb2phy0 { status = "okay"; @@ -503,11 +550,14 @@ }; &wifi { + /* SoC */ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l9a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l6a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l19a_3p3>; - vdd-3.3-ch1-supply = <&vreg_l8b_3p3>; + + /* WiFi / BT PMU */ + vdd-1.8-xo-supply = <&vreg_pmu_xo>; + vdd-1.3-rfa-supply = <&vreg_pmu_rf>; + vdd-3.3-ch0-supply = <&vreg_pmu_ch0>; + vdd-3.3-ch1-supply = <&vreg_pmu_ch1>; qcom,calibration-variant = "Inforce_IFC6560"; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index f4b8e8f468f2..bef3213165d6 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1013,6 +1013,20 @@ drive-strength = <2>; }; }; + + spi7_default: spi7-default-state { + pins = "gpio24", "gpio25", "gpio26", "gpio27"; + function = "blsp_spi7"; + drive-strength = <6>; + bias-disable; + }; + + spi7_sleep: spi7-sleep-state { + pins = "gpio24", "gpio25", "gpio26", "gpio27"; + function = "blsp_spi7"; + drive-strength = <6>; + bias-disable; + }; }; remoteproc_mss: remoteproc@4080000 { @@ -1950,6 +1964,26 @@ status = "disabled"; }; + blsp_spi7: spi@c1b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi7_default>; + pinctrl-1 = <&spi7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp_i2c8: i2c@c1b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b8000 0x600>; @@ -2755,10 +2789,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index 746e9deba526..c195c79c1c85 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -1130,6 +1130,17 @@ reg = <0x0 0x00ff1000 0x0 0x60>; }; + llcc: system-cache-controller@1100000 { + compatible = "qcom,sdm670-llcc"; + reg = <0 0x01100000 0 0x50000>, + <0 0x01180000 0 0x50000>, + <0 0x01300000 0 0x50000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + mem_noc: interconnect@1380000 { compatible = "qcom,sdm670-mem-noc"; reg = <0 0x01380000 0 0x27200>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 5118b776a9bb..02416812b6a7 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -276,6 +276,43 @@ vin-supply = <&vbat_som>; }; + + wcn3990-pmu { + compatible = "qcom,wcn3990-pmu"; + + pinctrl-0 = <&sw_ctrl_default>; + pinctrl-names = "default"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + + swctrl-gpios = <&pm8998_gpios 3 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_io: ldo0 { + regulator-name = "vreg_pmu_io"; + }; + + vreg_pmu_xo: ldo1 { + regulator-name = "vreg_pmu_xo"; + }; + + vreg_pmu_rf: ldo2 { + regulator-name = "vreg_pmu_rf"; + }; + + vreg_pmu_ch0: ldo3 { + regulator-name = "vreg_pmu_ch0"; + }; + + vreg_pmu_ch1: ldo4 { + regulator-name = "vreg_pmu_ch1"; + }; + }; + }; }; &adsp_pas { @@ -659,6 +696,14 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio3"; + function = "normal"; + + input-enable; + bias-pull-down; + }; + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; @@ -1038,10 +1083,11 @@ bluetooth { compatible = "qcom,wcn3990-bt"; - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; + vddio-supply = <&vreg_pmu_io>; + vddxo-supply = <&vreg_pmu_xo>; + vddrf-supply = <&vreg_pmu_rf>; + vddch0-supply = <&vreg_pmu_ch0>; + max-speed = <3200000>; }; }; @@ -1155,16 +1201,19 @@ }; &wifi { - status = "okay"; - + /* SoC */ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + /* WiFi / BT PMU */ + vdd-1.8-xo-supply = <&vreg_pmu_xo>; + vdd-1.3-rfa-supply = <&vreg_pmu_rf>; + vdd-3.3-ch0-supply = <&vreg_pmu_ch0>; + vdd-3.3-ch1-supply = <&vreg_pmu_ch1>; qcom,snoc-host-cap-8bit-quirk; qcom,calibration-variant = "Thundercomm_DB845C"; + + status = "okay"; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi index fd9788d5c3f5..693006685776 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi @@ -131,6 +131,33 @@ vin-supply = <&vph_pwr>; }; + + wcn3990-pmu { + compatible = "qcom,wcn3990-pmu"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + + regulators { + vreg_pmu_io: ldo0 { + regulator-name = "vreg_pmu_io"; + }; + + vreg_pmu_xo: ldo1 { + regulator-name = "vreg_pmu_xo"; + }; + + vreg_pmu_rf: ldo2 { + regulator-name = "vreg_pmu_rf"; + }; + + vreg_pmu_ch0: ldo3 { + regulator-name = "vreg_pmu_ch0"; + }; + }; + }; }; &adsp_pas { @@ -462,10 +489,11 @@ bluetooth { compatible = "qcom,wcn3990-bt"; - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; + vddio-supply = <&vreg_pmu_io>; + vddxo-supply = <&vreg_pmu_xo>; + vddrf-supply = <&vreg_pmu_rf>; + vddch0-supply = <&vreg_pmu_ch0>; + max-speed = <3200000>; }; }; @@ -526,9 +554,9 @@ &wifi { vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-1.8-xo-supply = <&vreg_pmu_xo>; + vdd-1.3-rfa-supply = <&vreg_pmu_rf>; + vdd-3.3-ch0-supply = <&vreg_pmu_ch0>; qcom,snoc-host-cap-8bit-quirk; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 5b121ea5520f..6b7378cf4d49 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -25,6 +25,41 @@ chassis-type = "handset"; qcom,msm-id = <QCOM_ID_SDM845 0x20001>; + alert-slider { + compatible = "gpio-keys"; + label = "Alert slider"; + + pinctrl-0 = <&alert_slider_default>; + pinctrl-names = "default"; + + switch-top { + label = "Silent"; + linux,input-type = <EV_ABS>; + linux,code = <ABS_SND_PROFILE>; + linux,input-value = <SND_PROFILE_SILENT>; + gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + linux,can-disable; + }; + + switch-middle { + label = "Vibrate"; + linux,input-type = <EV_ABS>; + linux,code = <ABS_SND_PROFILE>; + linux,input-value = <SND_PROFILE_VIBRATE>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; + linux,can-disable; + }; + + switch-bottom { + label = "Ring"; + linux,input-type = <EV_ABS>; + linux,code = <ABS_SND_PROFILE>; + linux,input-value = <SND_PROFILE_RING>; + gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + linux,can-disable; + }; + }; + aliases { serial0 = &uart9; serial1 = &uart6; @@ -195,6 +230,43 @@ pinctrl-names = "default"; regulator-boot-on; }; + + wcn3990-pmu { + compatible = "qcom,wcn3990-pmu"; + + pinctrl-0 = <&sw_ctrl_default>; + pinctrl-names = "default"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + + swctrl-gpios = <&pm8998_gpios 3 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_io: ldo0 { + regulator-name = "vreg_pmu_io"; + }; + + vreg_pmu_xo: ldo1 { + regulator-name = "vreg_pmu_xo"; + }; + + vreg_pmu_rf: ldo2 { + regulator-name = "vreg_pmu_rf"; + }; + + vreg_pmu_ch0: ldo3 { + regulator-name = "vreg_pmu_ch0"; + }; + + vreg_pmu_ch1: ldo4 { + regulator-name = "vreg_pmu_ch1"; + }; + }; + }; }; &adsp_pas { @@ -501,6 +573,14 @@ }; &pm8998_gpios { + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio3"; + function = "normal"; + + input-enable; + bias-pull-down; + }; + volume_down_gpio: pm8998-gpio5-state { pinconf { pins = "gpio5"; @@ -769,10 +849,11 @@ */ firmware-name = "OnePlus/enchilada/crnv21.bin"; - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; + vddio-supply = <&vreg_pmu_io>; + vddxo-supply = <&vreg_pmu_xo>; + vddrf-supply = <&vreg_pmu_rf>; + vddch0-supply = <&vreg_pmu_ch0>; + max-speed = <3200000>; }; }; @@ -946,13 +1027,14 @@ }; &wifi { - status = "okay"; vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + vdd-1.8-xo-supply = <&vreg_pmu_xo>; + vdd-1.3-rfa-supply = <&vreg_pmu_rf>; + vdd-3.3-ch0-supply = <&vreg_pmu_ch0>; + vdd-3.3-ch1-supply = <&vreg_pmu_ch1>; qcom,calibration-variant = "oneplus_sdm845"; qcom,snoc-host-cap-8bit-quirk; + + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 51b041f91d3e..740eb2255072 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -483,8 +483,8 @@ reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sde_dsi_active &sde_te_active>; - pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; + pinctrl-0 = <&sde_dsi_active &sde_te>; + pinctrl-1 = <&sde_dsi_suspend &sde_te>; port { panel_in_0: endpoint { @@ -623,14 +623,7 @@ bias-pull-down; }; - sde_te_active: sde-te-active-state { - pins = "gpio10"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - - sde_te_suspend: sde-te-suspend-state { + sde_te: sde-te-state { pins = "gpio10"; function = "mdp_vsync"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 7dc9349eedfd..4c63286d8b04 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -17,8 +17,8 @@ qcom,board-id = <8 0>; aliases { - serial0 = &uart6; - serial1 = &uart9; + serial0 = &uart9; + serial1 = &uart6; }; chosen { @@ -755,6 +755,19 @@ &uart6 { status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + firmware-name = "Sony/tama/crnv21.bin"; + + vddio-supply = <&vreg_s3a_1p3>; + vddxo-supply = <&vreg_s5a_1p9>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p0>; + + max-speed = <3200000>; + }; }; &uart9 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 01b570d0880d..1298485c4214 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -148,6 +148,7 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; }; vreg_l5a_0p8: ldo5 { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index bf2f9c04adba..4ae8627d6dbc 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2780,6 +2780,8 @@ qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; + sram = <&ipa_modem_tables>; + status = "disabled"; }; @@ -2805,6 +2807,62 @@ gpio-ranges = <&tlmm 0 0 151>; wakeup-parent = <&pdc_intc>; + cam_mclk0_default: cam-mclk0-default-state { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk0_sleep: cam-mclk0-sleep-state { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam_mclk1_default: cam-mclk1-default-state { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk1_sleep: cam-mclk1-sleep-state { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam_mclk2_default: cam-mclk2-default-state { + pins = "gpio15"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk2_sleep: cam-mclk2-sleep-state { + pins = "gpio15"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam_mclk3_default: cam-mclk3-default-state { + pins = "gpio16"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk3_sleep: cam-mclk3-sleep-state { + pins = "gpio16"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + cci0_default: cci0-default-state { /* SDA, SCL */ pins = "gpio17", "gpio18"; @@ -5134,6 +5192,10 @@ ranges = <0 0 0x14680000 0x40000>; + ipa_modem_tables: modem-tables@3d000 { + reg = <0x3d000 0x2000>; + }; + pil-reloc@3f94c { compatible = "qcom,pil-reloc-info"; reg = <0x3f94c 0xc8>; diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index eff4c9055d66..d1b61530b562 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -1580,9 +1580,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index d217d922811e..696e2e0841ad 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -678,9 +678,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index e9336adbc391..bd94eb87d6f9 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1864,6 +1864,8 @@ <&gcc GCC_DISP_HF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -3460,9 +3462,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi new file mode 100644 index 000000000000..7eecd9dc3028 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org> + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "sm6125.dtsi" +#include "pm6125.dtsi" + +/delete-node/ &adsp_pil_mem; +/delete-node/ &cont_splash_mem; +/delete-node/ &gpu_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; + +/ { + model = "Xiaomi Redmi Note 8"; + compatible = "xiaomi,ginkgo", "qcom,sm6125"; + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_SM6125 0x10000>; + + aliases { + serial0 = &uart4; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer { + compatible = "simple-framebuffer"; + memory-region = <&framebuffer_mem>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + adsp_pil_mem: adsp_pil_mem@55300000 { + reg = <0x0 0x55300000 0x0 0x2200000>; + no-map; + }; + + ipa_fw_mem: ipa_fw_mem@57500000 { + reg = <0x0 0x57500000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa_gsi_mem@57510000 { + reg = <0x0 0x57510000 0x0 0x5000>; + no-map; + }; + + gpu_mem: gpu_mem@57515000 { + reg = <0x0 0x57515000 0x0 0x2000>; + no-map; + }; + + framebuffer_mem: framebuffer@5c000000 { + reg = <0x0 0x5c000000 0x0 (2340 * 1080 * 4)>; + no-map; + }; + + /* Matching with recovery values to be able to get the results. */ + ramoops@61600000 { + compatible = "ramoops"; + reg = <0x0 0x61600000 0x0 0x400000>; + record-size = <0x80000>; + pmsg-size = <0x200000>; + console-size = <0x100000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l2a: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + vreg_l3a: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + regulator-allow-set-load; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-allow-set-load; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + regulator-allow-set-load; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l24a>; + vqmmc-supply = <&vreg_l11a>; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <30 4>; +}; + +&uart4 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts index 6b68e391cf3e..496f33e9d73c 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts @@ -2,294 +2,11 @@ /* * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org> */ - /dts-v1/; -#include <dt-bindings/arm/qcom,ids.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/input/gpio-keys.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include "sm6125.dtsi" -#include "pm6125.dtsi" +#include "sm6125-xiaomi-ginkgo-common.dtsi" / { model = "Xiaomi Redmi Note 8"; compatible = "xiaomi,ginkgo", "qcom,sm6125"; - chassis-type = "handset"; - - /* required for bootloader to select correct board */ - qcom,msm-id = <QCOM_ID_SM6125 0x10000>; - qcom,board-id = <22 0>; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - framebuffer0: framebuffer@5c000000 { - compatible = "simple-framebuffer"; - reg = <0 0x5c000000 0 (2340 * 1080 * 4)>; - width = <1080>; - height = <2340>; - stride = <(1080 * 4)>; - format = "a8r8g8b8"; - }; - }; - - reserved-memory { - debug_mem: debug@ffb00000 { - reg = <0x0 0xffb00000 0x0 0xc0000>; - no-map; - }; - - last_log_mem: lastlog@ffbc0000 { - reg = <0x0 0xffbc0000 0x0 0x80000>; - no-map; - }; - - pstore_mem: ramoops@ffc00000 { - compatible = "ramoops"; - reg = <0x0 0xffc40000 0x0 0xc0000>; - record-size = <0x1000>; - console-size = <0x40000>; - pmsg-size = <0x20000>; - }; - - cmdline_mem: memory@ffd00000 { - reg = <0x0 0xffd40000 0x0 0x1000>; - no-map; - }; - }; - - extcon_usb: extcon-usb { - compatible = "linux,extcon-usb-gpio"; - id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&vol_up_n>; - pinctrl-names = "default"; - - key-volume-up { - label = "Volume Up"; - gpios = <&pm6125_gpios 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <15>; - linux,can-disable; - wakeup-source; - }; - }; -}; - -&pm6125_gpios { - vol_up_n: vol-up-n-state { - pins = "gpio6"; - function = "normal"; - power-source = <1>; - bias-pull-up; - input-enable; - }; -}; - -&hsusb_phy1 { - vdd-supply = <&vreg_l7a>; - vdda-pll-supply = <&vreg_l10a>; - vdda-phy-dpdm-supply = <&vreg_l15a>; - status = "okay"; -}; - -&pon_pwrkey { - status = "okay"; -}; - -&pon_resin { - linux,code = <KEY_VOLUMEDOWN>; - status = "okay"; -}; - -&rpm_requests { - regulators-0 { - compatible = "qcom,rpm-pm6125-regulators"; - - vreg_s6a: s6 { - regulator-min-microvolt = <936000>; - regulator-max-microvolt = <1422000>; - }; - - vreg_l1a: l1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1256000>; - }; - - vreg_l2a: l2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1056000>; - }; - - vreg_l3a: l3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1064000>; - }; - - vreg_l4a: l4 { - regulator-min-microvolt = <872000>; - regulator-max-microvolt = <976000>; - regulator-allow-set-load; - }; - - vreg_l5a: l5 { - regulator-min-microvolt = <1648000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - - vreg_l6a: l6 { - regulator-min-microvolt = <576000>; - regulator-max-microvolt = <656000>; - }; - - vreg_l7a: l7 { - regulator-min-microvolt = <872000>; - regulator-max-microvolt = <976000>; - }; - - vreg_l8a: l8 { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <728000>; - }; - - vreg_l9a: l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1896000>; - }; - - vreg_l10a: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1896000>; - regulator-allow-set-load; - }; - - vreg_l11a: l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1952000>; - regulator-allow-set-load; - }; - - vreg_l12a: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1996000>; - }; - - vreg_l13a: l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1832000>; - }; - - vreg_l14a: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1904000>; - }; - - vreg_l15a: l15 { - regulator-min-microvolt = <3104000>; - regulator-max-microvolt = <3232000>; - }; - - vreg_l16a: l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1904000>; - }; - - vreg_l17a: l17 { - regulator-min-microvolt = <1248000>; - regulator-max-microvolt = <1304000>; - }; - - vreg_l18a: l18 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1264000>; - regulator-allow-set-load; - }; - - vreg_l19a: l19 { - regulator-min-microvolt = <1648000>; - regulator-max-microvolt = <2952000>; - }; - - vreg_l20a: l20 { - regulator-min-microvolt = <1648000>; - regulator-max-microvolt = <2952000>; - }; - - vreg_l21a: l21 { - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <2856000>; - }; - - vreg_l22a: l22 { - regulator-min-microvolt = <2944000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - - vreg_l23a: l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3400000>; - }; - - vreg_l24a: l24 { - regulator-min-microvolt = <2944000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - - }; -}; - -&sdc2_off_state { - sd-cd-pins { - pins = "gpio98"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; - -&sdc2_on_state { - sd-cd-pins { - pins = "gpio98"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -&sdhc_1 { - vmmc-supply = <&vreg_l24a>; - vqmmc-supply = <&vreg_l11a>; - status = "okay"; -}; - -&sdhc_2 { - cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; - vmmc-supply = <&vreg_l22a>; - vqmmc-supply = <&vreg_l5a>; - no-sdio; - no-mmc; - status = "okay"; -}; - -&tlmm { - gpio-reserved-ranges = <22 2>, <28 6>; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_dwc3 { - extcon = <&extcon_usb>; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index 994fb0412fcb..97f64cb5d570 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -82,6 +82,19 @@ }; }; + ts_vdd_supply: regulator-ts-vdd { + compatible = "regulator-fixed"; + regulator-name = "ts_vdd_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <70000>; + + enable-active-high; + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&ts_vdd_en>; + pinctrl-names = "default"; + }; + thermal-zones { rf-pa0-thermal { thermal-sensors = <&pm6125_adc_tm 0>; @@ -128,6 +141,27 @@ status = "okay"; }; +&i2c2 { + status = "okay"; + + touchscreen@38 { + compatible = "focaltech,ft3518"; + reg = <0x38>; + interrupts-extended = <&tlmm 88 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&ts_vdd_supply>; + + pinctrl-0 = <&ts_int_active &ts_reset_active>; + pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; + pinctrl-names = "default","sleep"; + + reset-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1560>; + }; +}; + &pm6125_adc { pinctrl-names = "default"; pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; @@ -220,6 +254,10 @@ status = "okay"; }; +&qupv3_id_0 { + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; @@ -387,6 +425,41 @@ &tlmm { gpio-reserved-ranges = <22 2>, <28 6>; + + ts_vdd_en: ts-vdd-default-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_reset_active: pmx-ts-reset-active-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_suspend: pmx-ts-reset-suspend-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_int_active: pmx-ts-int-active-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_suspend: pmx-ts-int-suspend-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; }; &ufs_mem_hc { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dts new file mode 100644 index 000000000000..1231e440ba2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2026, Barnabas Czeman + */ +/dts-v1/; + +#include "sm6125-xiaomi-ginkgo-common.dtsi" + +/ { + model = "Xiaomi Redmi Note 8T"; + compatible = "xiaomi,willow", "qcom,sm6125"; + +}; + +/* Difference from Redmi Note 8 it have NFC */ diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 80c42dff5399..6e84c226948c 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -661,6 +661,13 @@ drive-strength = <6>; bias-disable; }; + + qup_uart4_default: qup-uart4-default-state { + pins = "gpio16", "gpio17"; + function = "qup04"; + drive-strength = <2>; + bias-disable; + }; }; gcc: clock-controller@1400000 { @@ -686,6 +693,13 @@ status = "disabled"; }; + rng: rng@1b53000 { + compatible = "qcom,prng-ee"; + reg = <0x01b53000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x01c40000 0x1100>, @@ -978,6 +992,17 @@ #size-cells = <0>; status = "disabled"; }; + + uart4: serial@4a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x04a90000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_uart4_default>; + pinctrl-names = "default"; + status = "disabled"; + }; }; gpi_dma1: dma-controller@4c00000 { @@ -1238,6 +1263,8 @@ "ahb", "core"; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + power-domains = <&dispcc MDSS_GDSC>; iommus = <&apps_smmu 0x400 0x0>; @@ -1437,6 +1464,7 @@ power-domains = <&rpmpd RPMPD_VDDCX>; #clock-cells = <1>; + #reset-cells = <1>; #power-domain-cells = <1>; }; @@ -1592,10 +1620,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; clock-frequency = <19200000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 9f9b9f9af0da..034545d2af2d 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1307,6 +1307,8 @@ qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; + sram = <&ipa_modem_tables>; + status = "disabled"; }; @@ -2346,8 +2348,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -2731,6 +2733,20 @@ }; }; + sram@14680000 { + compatible = "qcom,sm6350-imem", "syscon", "simple-mfd"; + reg = <0 0x14680000 0 0x2e000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x14680000 0x2e000>; + + ipa_modem_tables: modem-tables@28000 { + reg = <0x28000 0x2000>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sm6350-smmu-500", "arm,mmu-500"; reg = <0x0 0x15000000 0x0 0x100000>; @@ -3509,9 +3525,9 @@ timer { compatible = "arm,armv8-timer"; clock-frequency = <19200000>; - interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 87d6600ccbd9..ccf572bb1549 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -2469,9 +2469,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index a3c2b26736f4..3964aae47fd4 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -1019,12 +1019,14 @@ * the Bluetooth module drives the pin in either * direction or leaves the pin fully unpowered. */ + /delete-property/ bias-disable; bias-bus-hold; }; &qup_uart1_rts { /* We'll drive RTS, so no pull */ drive-strength = <2>; + /delete-property/ bias-pull-down; bias-disable; }; @@ -1035,12 +1037,14 @@ * in tri-state (module powered off or not driving the * signal yet). */ + /delete-property/ bias-disable; bias-pull-up; }; &qup_uart1_tx { /* We'll drive TX, so no pull */ drive-strength = <2>; + /delete-property/ bias-pull-up; bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 1eea9c5c6684..6ae6e07c37df 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -20,6 +20,7 @@ aliases { serial0 = &uart2; + serial1 = &uart13; }; chosen { @@ -66,6 +67,43 @@ }; }; }; + + wcn3998-pmu { + compatible = "qcom,wcn3998-pmu"; + + pinctrl-0 = <&sw_ctrl_default>; + pinctrl-names = "default"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + vddch1-supply = <&vreg_l10c_3p3>; + + swctrl-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_io: ldo0 { + regulator-name = "vreg_pmu_io"; + }; + + vreg_pmu_xo: ldo1 { + regulator-name = "vreg_pmu_xo"; + }; + + vreg_pmu_rf: ldo2 { + regulator-name = "vreg_pmu_rf"; + }; + + vreg_pmu_ch0: ldo3 { + regulator-name = "vreg_pmu_ch0"; + }; + + vreg_pmu_ch1: ldo4 { + regulator-name = "vreg_pmu_ch1"; + }; + }; + }; }; &apps_rsc { @@ -598,6 +636,10 @@ status = "okay"; }; +&qupv3_id_2 { + status = "okay"; +}; + &remoteproc_adsp { status = "okay"; @@ -630,12 +672,97 @@ bias-disable; }; + qup_uart13_default: qup-uart13-default-state { + cts-pins { + pins = "gpio43"; + function = "qup13"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio44"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio46"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_uart13_sleep: qup-uart13-sleep-state { + cts-pins { + pins = "gpio43"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + tx-pins { + pins = "gpio45"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rx-pins { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio50"; + function = "gpio"; + bias-pull-down; + }; }; &uart2 { status = "okay"; }; +&uart13 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&qup_uart13_default>; + pinctrl-1 = <&qup_uart13_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_pmu_io>; + vddxo-supply = <&vreg_pmu_xo>; + vddrf-supply = <&vreg_pmu_rf>; + vddch0-supply = <&vreg_pmu_ch0>; + }; +}; + &ufs_mem_hc { status = "okay"; @@ -709,12 +836,16 @@ }; &wifi { - status = "okay"; - + /* SoC */ vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; - vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + + /* WiFi / BT PMU */ + vdd-1.8-xo-supply = <&vreg_pmu_xo>; + vdd-1.3-rfa-supply = <&vreg_pmu_rf>; + vdd-3.3-ch0-supply = <&vreg_pmu_ch0>; + vdd-3.3-ch1-supply = <&vreg_pmu_ch1>; qcom,calibration-variant = "Qualcomm_sm8150hdk"; + + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 97ca5275d740..0e101096209a 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -3954,8 +3954,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index c7dffa440074..7076720413ab 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -665,6 +665,11 @@ opp-hz = /bits/ 64 <2841600000>; opp-peak-kBps = <8368000 51609600>; }; + + cpu7_opp21: opp-3091200000 { + opp-hz = /bits/ 64 <3091200000>; + opp-peak-kBps = <8368000 51609600>; + }; }; firmware { @@ -4826,8 +4831,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -6285,14 +6290,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 5c8fe213f5e4..c830953156ec 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1866,6 +1866,8 @@ qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; + sram = <&ipa_modem_tables>; + status = "disabled"; }; @@ -2925,8 +2927,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -3440,6 +3442,20 @@ }; }; + sram@14680000 { + compatible = "qcom,sm8350-imem", "syscon", "simple-mfd"; + reg = <0 0x14680000 0 0x40000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x14680000 0x40000>; + + ipa_modem_tables: modem-tables@3d000 { + reg = <0x3d000 0x2000>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sm8350-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -4523,9 +4539,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 920a2d1c04d0..03bf30b53f28 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -3508,8 +3508,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -5104,7 +5104,7 @@ gic_its: msi-controller@17140000 { compatible = "arm,gic-v3-its"; - reg = <0x0 0x17140000 0x0 0x20000>; + reg = <0x0 0x17140000 0x0 0x40000>; msi-controller; #msi-cells = <1>; }; @@ -5429,9 +5429,6 @@ bus-width = <4>; dma-coherent; - /* Forbid SDR104/SDR50 - broken hw! */ - sdhci-caps-mask = <0x3 0x0>; - status = "disabled"; sdhc2_opp_table: opp-table { @@ -6327,10 +6324,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; clock-frequency = <19200000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk-display-card.dtso b/arch/arm64/boot/dts/qcom/sm8550-hdk-display-card.dtso new file mode 100644 index 000000000000..7b54b084b8bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk-display-card.dtso @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024-2026, Linaro Limited + */ + +/* + * Display Card kit overlay + * This requires S5702 Switch 7 to be turned to OFF to route DSI0 to the display panel + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; +/plugin/; + +/* Disable HDMI bridge related nodes (mutually exclusive with the display card) */ + +&i2c0 { + status = "disabled"; +}; + +<9611_1v2 { + status = "disabled"; +}; + +<9611_3v3 { + status = "disabled"; +}; + +&vreg_bob_3v3 { + status = "disabled"; +}; + +<9611_codec { + status = "disabled"; +}; + +&mdss_dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; +}; + +&spi4 { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-0 = <&ts_irq>, <&ts_reset>; + pinctrl-names = "default"; + }; +}; + +&tlmm { + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync: mdp-vsync-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_irq: ts-irq-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-disable; + }; + + ts_reset: ts-reset-state { + pins = "gpio24"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 94ed1c221856..5769be83cfbd 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -707,8 +707,8 @@ reg = <0>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; - pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; + pinctrl-0 = <&sde_dsi_active>, <&sde_te>; + pinctrl-1 = <&sde_dsi_suspend>, <&sde_te>; vddio-supply = <&vreg_l12b_1p8>; vci-supply = <&vreg_l13b_3p0>; @@ -915,14 +915,7 @@ bias-pull-down; }; - sde_te_active: sde-te-active-state { - pins = "gpio86"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - - sde_te_suspend: sde-te-suspend-state { + sde_te: sde-te-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index c35d4737a412..2fb2e0be5e4c 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -870,8 +870,8 @@ compatible = "visionox,vtdr6130"; reg = <0>; - pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; - pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; + pinctrl-0 = <&sde_dsi_active>, <&sde_te>; + pinctrl-1 = <&sde_dsi_suspend>, <&sde_te>; pinctrl-names = "default", "sleep"; vci-supply = <&vreg_l13b_3p0>; @@ -1179,14 +1179,7 @@ bias-pull-down; }; - sde_te_active: sde-te-active-state { - pins = "gpio86"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - - sde_te_suspend: sde-te-suspend-state { + sde_te: sde-te-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index e3f93f4f412d..912525e9bca6 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -76,8 +76,8 @@ power-domains = <&cpu_pd0>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <326>; + dynamic-power-coefficient = <251>; #cooling-cells = <2>; l2_0: l2-cache { compatible = "cache"; @@ -102,8 +102,8 @@ power-domains = <&cpu_pd1>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <326>; + dynamic-power-coefficient = <251>; #cooling-cells = <2>; l2_100: l2-cache { compatible = "cache"; @@ -123,8 +123,8 @@ power-domains = <&cpu_pd2>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <326>; + dynamic-power-coefficient = <251>; #cooling-cells = <2>; l2_200: l2-cache { compatible = "cache"; @@ -144,8 +144,8 @@ power-domains = <&cpu_pd3>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; - capacity-dmips-mhz = <1792>; - dynamic-power-coefficient = <270>; + capacity-dmips-mhz = <693>; + dynamic-power-coefficient = <447>; #cooling-cells = <2>; l2_300: l2-cache { compatible = "cache"; @@ -165,8 +165,8 @@ power-domains = <&cpu_pd4>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; - capacity-dmips-mhz = <1792>; - dynamic-power-coefficient = <270>; + capacity-dmips-mhz = <693>; + dynamic-power-coefficient = <447>; #cooling-cells = <2>; l2_400: l2-cache { compatible = "cache"; @@ -186,8 +186,8 @@ power-domains = <&cpu_pd5>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; - capacity-dmips-mhz = <1792>; - dynamic-power-coefficient = <270>; + capacity-dmips-mhz = <693>; + dynamic-power-coefficient = <447>; #cooling-cells = <2>; l2_500: l2-cache { compatible = "cache"; @@ -207,8 +207,8 @@ power-domains = <&cpu_pd6>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; - capacity-dmips-mhz = <1792>; - dynamic-power-coefficient = <270>; + capacity-dmips-mhz = <693>; + dynamic-power-coefficient = <447>; #cooling-cells = <2>; l2_600: l2-cache { compatible = "cache"; @@ -228,8 +228,8 @@ power-domains = <&cpu_pd7>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; - capacity-dmips-mhz = <1894>; - dynamic-power-coefficient = <588>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <1057>; #cooling-cells = <2>; l2_700: l2-cache { compatible = "cache"; @@ -1251,6 +1251,22 @@ #size-cells = <0>; status = "disabled"; }; + + uart15: serial@89c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_default>; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; }; i2c_master_hub_0: geniqup@9c0000 { @@ -2503,48 +2519,56 @@ opp-hz = /bits/ 64 <680000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0x882e5ffd>; }; opp-615000000 { opp-hz = /bits/ 64 <615000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; opp-peak-kBps = <12449218>; + qcom,opp-acd-level = <0xa82f5ffd>; }; opp-550000000 { opp-hz = /bits/ 64 <550000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; opp-peak-kBps = <10687500>; + qcom,opp-acd-level = <0xe0285ffd>; }; opp-475000000 { opp-hz = /bits/ 64 <475000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; opp-peak-kBps = <6074218>; + qcom,opp-acd-level = <0xe0285ffd>; }; opp-401000000 { opp-hz = /bits/ 64 <401000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; opp-peak-kBps = <6074218>; + qcom,opp-acd-level = <0xc02a5ffd>; }; opp-348000000 { opp-hz = /bits/ 64 <348000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; opp-peak-kBps = <6074218>; + qcom,opp-acd-level = <0xe02b5ffd>; }; opp-295000000 { opp-hz = /bits/ 64 <295000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; opp-peak-kBps = <6074218>; + qcom,opp-acd-level = <0xe02d5ffd>; }; opp-220000000 { opp-hz = /bits/ 64 <220000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; opp-peak-kBps = <2136718>; + qcom,opp-acd-level = <0xc02f5ffd>; }; }; }; @@ -2694,6 +2718,8 @@ qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; + sram = <&ipa_modem_tables>; + status = "disabled"; }; @@ -3210,7 +3236,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&bi_tcxo_div2>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x540 0>; qcom,dll-config = <0x0007642c>; @@ -3227,9 +3253,6 @@ max-sd-hs-hz = <37500000>; dma-coherent; - /* Forbid SDR104/SDR50 - broken hw! */ - sdhci-caps-mask = <0x3 0>; - status = "disabled"; sdhc2_opp_table: opp-table { @@ -3320,19 +3343,19 @@ opp-366000000 { opp-hz = /bits/ 64 <366000000>; - required-opps = <&rpmhpd_opp_svs_l1>, + required-opps = <&rpmhpd_opp_svs>, <&rpmhpd_opp_svs_l1>; }; opp-444000000 { opp-hz = /bits/ 64 <444000000>; - required-opps = <&rpmhpd_opp_nom>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_nom>; }; opp-533333334 { opp-hz = /bits/ 64 <533333334>; - required-opps = <&rpmhpd_opp_turbo>, + required-opps = <&rpmhpd_opp_nom>, <&rpmhpd_opp_turbo>; }; }; @@ -5095,6 +5118,14 @@ bias-pull-down; }; + qup_uart15_default: qup-uart15-default-state { + /* TX, RX */ + pins = "gpio74", "gpio75"; + function = "qup2_se7"; + drive-strength = <2>; + bias-pull-up; + }; + sdc2_sleep: sdc2-sleep-state { clk-pins { pins = "sdc2_clk"; @@ -5136,6 +5167,20 @@ }; }; + sram@14680000 { + compatible = "qcom,sm8550-imem", "syscon", "simple-mfd"; + reg = <0 0x14680000 0 0x2c000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x14680000 0x2c000>; + + ipa_modem_tables: modem-tables@8000 { + reg = <0x8000 0x2000>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -5274,7 +5319,7 @@ gic_its: msi-controller@17140000 { compatible = "arm,gic-v3-its"; - reg = <0 0x17140000 0 0x20000>; + reg = <0 0x17140000 0 0x40000>; msi-controller; #msi-cells = <1>; }; @@ -6758,9 +6803,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts b/arch/arm64/boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts new file mode 100644 index 000000000000..0dc994f4e48d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts @@ -0,0 +1,1551 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + * Copyright (c) 2025, Kancy Joe <kancy2333@outlook.com> + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8650.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" + +/delete-node/ &rmtfs_mem; +/delete-node/ &hwfence_shbuf; + +/ { + model = "AYANEO Pocket S2 (Pro)"; + compatible = "ayaneo,pocket-s2", "qcom,sm8650"; + chassis-type = "handset"; + + aliases { + serial0 = &uart15; + serial1 = &uart14; + }; + + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + fan: fan { + compatible = "pwm-fan"; + + interrupts-extended = <&tlmm 14 IRQ_TYPE_EDGE_FALLING>; + + pwms = <&pm8550_pwm 3 50000>; + + fan-supply = <&fan_pwr>; + + #cooling-cells = <2>; + cooling-levels = <0 16 32 45 60 80 105 130 155 180 205 230 255>; + + pinctrl-0 = <&fan_int>, <&pwm_fan_ctrl_active>; + pinctrl-1 = <&pwm_fan_ctrl_sleep>; + pinctrl-names = "default", "sleep"; + }; + + fan_pwr: fan-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "fan_pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpios = <&tlmm 125 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&fan_vdd>; + + pinctrl-0 = <&fan_pwr_pins>; + pinctrl-names = "default"; + }; + + fan_vdd: fan-vdd-regulator { + compatible = "regulator-fixed"; + + regulator-name = "fan_vdd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + + pinctrl-0 = <&fan_vdd_pins>; + pinctrl-names = "default"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&redriver_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&wcd_usbss_sbu_mux>; + }; + }; + }; + }; + }; + + upd720201_avdd33_reg: upd720201-avdd33-regulator { + compatible = "regulator-fixed"; + + regulator-name = "upd720201_avdd33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpios = <&tlmm 123 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + + pinctrl-0 = <&upd720201_avdd33>; + pinctrl-names = "default"; + }; + + upd720201_vdd10_reg: upd720201-vdd10-regulator { + compatible = "regulator-fixed"; + + regulator-name = "upd720201_vdd10"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + + pinctrl-0 = <&upd720201_vdd10>; + pinctrl-names = "default"; + }; + + upd720201_vdd33_reg: upd720201-vdd33-regulator { + compatible = "regulator-fixed"; + + regulator-name = "upd720201_vdd33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + + pinctrl-0 = <&upd720201_vdd33>; + pinctrl-names = "default"; + }; + + sound { + compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; + model = "SM8650-APS2"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT7", "DMIC1_OUTPUT", + "TX SWR_INPUT8", "DMIC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd939x 0>, + <&swr1 0>, + <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + codec { + sound-dai = <&wcd939x 1>, + <&swr2 0>, + <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&right_spkr>, + <&left_spkr>, + <&swr3 0>, + <&lpass_wsa2macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + dp-dai-link { + link-name = "DisplayPort Playback"; + + codec { + sound-dai = <&mdss_dp0>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>, <&bt_default>; + + wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_s4i_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddio1p2-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_s2c_0p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p8-supply = <&vreg_s6c_1p8>; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&cpu2_top_thermal { + trips { + cpu2_active: cpu2-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu2_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu3_top_thermal { + trips { + cpu3_active: cpu3-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu3_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu4_top_thermal { + trips { + cpu4_active: cpu4-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu4_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu5_top_thermal { + trips { + cpu5_active: cpu5-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu5_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu6_top_thermal { + trips { + cpu6_active: cpu6-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu6_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu7_top_thermal { + trips { + cpu7_active: cpu7-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu7_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&gpu0_cooling_maps { + map1 { + trip = <&gpu0_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&gpu1_cooling_maps { + map1 { + trip = <&gpu1_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&gpu2_cooling_maps { + map1 { + trip = <&gpu2_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&gpu3_cooling_maps { + map1 { + trip = <&gpu3_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&gpu4_cooling_maps { + map1 { + trip = <&gpu4_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&gpu5_cooling_maps { + map1 { + trip = <&gpu5_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&gpu6_cooling_maps { + map1 { + trip = <&gpu6_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&gpu7_cooling_maps { + map1 { + trip = <&gpu7_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&gpu0_trips { + gpu0_active: trip-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; +}; + +&gpu1_trips { + gpu1_active: trip-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; +}; + +&gpu2_trips { + gpu2_active: trip-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; +}; + +&gpu3_trips { + gpu3_active: trip-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; +}; + +&gpu4_trips { + gpu4_active: trip-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; +}; + +&gpu5_trips { + gpu5_active: trip-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; +}; + +&gpu6_trips { + gpu6_active: trip-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; + +}; + +&gpu7_trips { + gpu7_active: trip-active { + temperature = <38000>; + hysteresis = <2000>; + type = "active"; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + status = "okay"; + + wcd_usbss: typec-mux@e { + compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; + reg = <0xe>; + + vdd-supply = <&vreg_l15b_1p8>; + reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wcd_usbss_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + }; +}; + +&i2c6 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l15b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; +}; + +&iris { + status = "okay"; +}; + +&lpass_wsa2macro { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + status = "okay"; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_port0 { + /* Renesas μPD720201 PCIe USB3.0 HOST CONTROLLER */ + usb-controller@0 { + compatible = "pci1912,0014"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + avdd33-supply = <&upd720201_avdd33_reg>; + vdd10-supply = <&upd720201_vdd10_reg>; + vdd33-supply = <&upd720201_vdd33_reg>; + + pinctrl-0 = <&gamepad_pwr_en>; + pinctrl-names = "default"; + }; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3e_0p9>; + vdda-pll-supply = <&vreg_l3i_1p2>; + vdda-qref-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + power-source = <1>; + }; + + pwm_fan_ctrl_active: pwm-fan-ctrl-active-state { + pins = "gpio9"; + function = "func1"; + bias-disable; + power-source = <0>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + pwm_fan_ctrl_sleep: pwm-fan-ctrl-sleep-state { + pins = "gpio9"; + function = "normal"; + output-high; + bias-disable; + power-source = <0>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + bias-pull-up; + input-enable; + output-disable; + power-source = <1>; /* 1.8 V */ + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + label = "Power Status"; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&qup_i2c3_data_clk { + /* Use internal I2C pull-up */ + bias-pull-up = <2200>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8650/ayaneo/ps2/adsp.mbn", + "qcom/sm8650/ayaneo/ps2/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/ayaneo/ps2/cdsp.mbn", + "qcom/sm8650/ayaneo/ps2/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&reserved_memory { + lost_reg_mem: lost-reg-mem { + reg = <0 0x9b09c000 0 0x4000>; + no-map; + }; + + hwfence_shbuf: hwfence-shbuf@d4e23000 { + reg = <0 0xd4e23000 0 0x2dd000>; + no-map; + }; + + splash_region: splash-region { + label = "cont_splash_region"; + reg = <0 0xd5100000 0 0x2b00000>; + no-map; + }; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&swr3 { + status = "okay"; + + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Speaker Left */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + #sound-dai-cells = <0>; + reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR3 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR3 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR3 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR3 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR3 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR3 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Speaker Right */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + #sound-dai-cells = <0>; + reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR3 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR3 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR3 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR3 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR3 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR3 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 4>, <36 1>, <38 6>, <74 1>; + + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio18"; + function = "gpio"; + bias-pull-down; + }; + }; + + fan_pwr_pins: fan-pwr-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + fan_vdd_pins: fan-vdd-state { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + fan_int: fan-int-state { + pins = "gpio14"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + upd720201_avdd33: upd720201-avdd33-state { + pins = "gpio123"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + upd720201_vdd10: pd720201-vdd10-state { + pins = "gpio122"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + upd720201_vdd33: upd720201-vdd33-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gamepad_pwr_en: gamepad-pwr-en-active-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + wlan_en: wlan-en-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + + max-speed = <3200000>; + }; +}; + +&uart15 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C + * USB SS -> NB7VPQ904MMUTWG -> USB-C + */ + +&usb_1 { + dr_mode = "otg"; + usb-role-switch; + + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_ss_in>; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index bb688a5d21c2..dd6e33d2dc5d 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -618,8 +618,8 @@ vci-supply = <&vreg_l13b_3p0>; vdd-supply = <&vreg_l11b_1p2>; - pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; - pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync>; pinctrl-names = "default", "sleep"; port { @@ -821,14 +821,7 @@ bias-pull-down; }; - mdp_vsync_active: mdp-vsync-active-state { - pins = "gpio86"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - - mdp_vsync_suspend: mdp-vsync-suspend-state { + mdp_vsync: mdp-vsync-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 087828c60692..a3982ae22929 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -908,8 +908,8 @@ vci-supply = <&vreg_l13b_3p0>; vdd-supply = <&vreg_l11b_1p2>; - pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; - pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync>; pinctrl-names = "default", "sleep"; port { @@ -1244,14 +1244,7 @@ bias-pull-down; }; - mdp_vsync_active: mdp-vsync-active-state { - pins = "gpio86"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - - mdp_vsync_suspend: mdp-vsync-suspend-state { + mdp_vsync: mdp-vsync-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 357e43b90740..1604bc8cff37 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -3917,7 +3917,7 @@ }; }; - pcie@0 { + pcie1_port0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; @@ -4393,6 +4393,8 @@ qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; + sram = <&ipa_modem_tables>; + status = "disabled"; }; @@ -4957,7 +4959,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&bi_tcxo_div2>; clock-names = "iface", "core", "xo"; @@ -4976,9 +4978,6 @@ bus-width = <4>; - /* Forbid SDR104/SDR50 - broken hw! */ - sdhci-caps-mask = <0x3 0>; - qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; @@ -5236,13 +5235,13 @@ opp-300000000 { opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_low_svs>, + required-opps = <&rpmhpd_opp_svs>, <&rpmhpd_opp_low_svs>; }; opp-380000000 { opp-hz = /bits/ 64 <380000000>; - required-opps = <&rpmhpd_opp_svs>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_svs>; }; @@ -5254,13 +5253,13 @@ opp-480000000 { opp-hz = /bits/ 64 <480000000>; - required-opps = <&rpmhpd_opp_nom>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_nom>; }; opp-533333334 { opp-hz = /bits/ 64 <533333334>; - required-opps = <&rpmhpd_opp_turbo>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_turbo>; }; }; @@ -5905,6 +5904,7 @@ phy-names = "dp"; #sound-dai-cells = <0>; + sound-name-prefix = "DisplayPort0"; status = "disabled"; @@ -7078,6 +7078,20 @@ }; }; + sram@14680000 { + compatible = "qcom,sm8650-imem", "syscon", "simple-mfd"; + reg = <0 0x14680000 0 0x2c000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x14680000 0x2c000>; + + ipa_modem_tables: modem-tables@8000 { + reg = <0x8000 0x2000>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -7219,7 +7233,7 @@ gic_its: msi-controller@17140000 { compatible = "arm,gic-v3-its"; - reg = <0 0x17140000 0 0x20000>; + reg = <0 0x17140000 0 0x40000>; msi-controller; #msi-cells = <1>; @@ -7846,7 +7860,7 @@ }; }; - cpu2-top-thermal { + cpu2_top_thermal: cpu2-top-thermal { thermal-sensors = <&tsens0 5>; trips { @@ -7870,7 +7884,7 @@ }; }; - cpu3-top-thermal { + cpu3_top_thermal: cpu3-top-thermal { thermal-sensors = <&tsens0 7>; trips { @@ -7894,7 +7908,7 @@ }; }; - cpu4-top-thermal { + cpu4_top_thermal: cpu4-top-thermal { thermal-sensors = <&tsens0 9>; trips { @@ -7918,7 +7932,7 @@ }; }; - cpu5-top-thermal { + cpu5_top_thermal: cpu5-top-thermal { thermal-sensors = <&tsens0 11>; trips { @@ -7942,7 +7956,7 @@ }; }; - cpu6-top-thermal { + cpu6_top_thermal: cpu6-top-thermal { thermal-sensors = <&tsens0 13>; trips { @@ -7984,7 +7998,7 @@ }; }; - cpu7-top-thermal { + cpu7_top_thermal: cpu7-top-thermal { thermal-sensors = <&tsens1 1>; trips { @@ -8247,14 +8261,14 @@ thermal-sensors = <&tsens2 1>; - cooling-maps { + gpu0_cooling_maps: cooling-maps { map0 { trip = <&gpu0_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; - trips { + gpu0_trips: trips { gpu0_alert0: trip-point0 { temperature = <95000>; hysteresis = <1000>; @@ -8280,14 +8294,14 @@ thermal-sensors = <&tsens2 2>; - cooling-maps { + gpu1_cooling_maps: cooling-maps { map0 { trip = <&gpu1_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; - trips { + gpu1_trips: trips { gpu1_alert0: trip-point0 { temperature = <95000>; hysteresis = <1000>; @@ -8313,14 +8327,14 @@ thermal-sensors = <&tsens2 3>; - cooling-maps { + gpu2_cooling_maps: cooling-maps { map0 { trip = <&gpu2_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; - trips { + gpu2_trips: trips { gpu2_alert0: trip-point0 { temperature = <95000>; hysteresis = <1000>; @@ -8346,14 +8360,14 @@ thermal-sensors = <&tsens2 4>; - cooling-maps { + gpu3_cooling_maps: cooling-maps { map0 { trip = <&gpu3_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; - trips { + gpu3_trips: trips { gpu3_alert0: trip-point0 { temperature = <95000>; hysteresis = <1000>; @@ -8379,14 +8393,14 @@ thermal-sensors = <&tsens2 5>; - cooling-maps { + gpu4_cooling_maps: cooling-maps { map0 { trip = <&gpu4_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; - trips { + gpu4_trips: trips { gpu4_alert0: trip-point0 { temperature = <95000>; hysteresis = <1000>; @@ -8412,14 +8426,14 @@ thermal-sensors = <&tsens2 6>; - cooling-maps { + gpu5_cooling_maps: cooling-maps { map0 { trip = <&gpu5_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; - trips { + gpu5_trips: trips { gpu5_alert0: trip-point0 { temperature = <95000>; hysteresis = <1000>; @@ -8445,14 +8459,14 @@ thermal-sensors = <&tsens2 7>; - cooling-maps { + gpu6_cooling_maps: cooling-maps { map0 { trip = <&gpu6_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; - trips { + gpu6_trips: trips { gpu6_alert0: trip-point0 { temperature = <95000>; hysteresis = <1000>; @@ -8478,14 +8492,14 @@ thermal-sensors = <&tsens2 8>; - cooling-maps { + gpu7_cooling_maps: cooling-maps { map0 { trip = <&gpu7_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; - trips { + gpu7_trips: trips { gpu7_alert0: trip-point0 { temperature = <95000>; hysteresis = <1000>; diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts index cb718331496e..3837f6785320 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts @@ -54,6 +54,15 @@ vdd-px-supply = <&vreg_l2i_1p2>; #sound-dai-cells = <1>; + + mode-switch; + orientation-switch; + + port { + wcd_codec_headset_in: endpoint { + remote-endpoint = <&wcd_usbss_headset_out>; + }; + }; }; chosen { @@ -230,6 +239,7 @@ reg = <2>; pmic_glink_sbu: endpoint { + remote-endpoint = <&wcd_usbss_sbu_mux>; }; }; }; @@ -925,6 +935,42 @@ }; }; +&i2c3 { + status = "okay"; + + wcd_usbss: typec-mux@e { + compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; + reg = <0xe>; + + vdd-supply = <&vreg_l15b_1p8>; + reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wcd_usbss_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + + port@1 { + reg = <1>; + + wcd_usbss_headset_out: endpoint { + remote-endpoint = <&wcd_codec_headset_in>; + }; + }; + }; + }; +}; + &iris { status = "okay"; }; @@ -937,6 +983,56 @@ qcom,dmic-sample-rate = <4800000>; }; +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3g_1p2>; + + status = "okay"; + + panel@0 { + compatible = "novatek,nt37801"; + reg = <0>; + + reset-gpios = <&tlmm 98 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p0>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l3i_0p88>; + + status = "okay"; +}; + &pm8550_flash { status = "okay"; @@ -1053,6 +1149,11 @@ status = "okay"; }; +&qup_i2c3_data_clk { + /* Use internal I2C pull-up */ + bias-pull-up = <2200>; +}; + &qupv3_1 { status = "okay"; }; @@ -1225,6 +1326,27 @@ bias-pull-up; }; + mdp_vsync: mdp-vsync-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio101"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi index f56b1f889b85..18fb52c14acd 100644 --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi @@ -3,7 +3,9 @@ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8750-dispcc.h> #include <dt-bindings/clock/qcom,sm8750-gcc.h> #include <dt-bindings/clock/qcom,sm8750-tcsr.h> #include <dt-bindings/clock/qcom,sm8750-videocc.h> @@ -20,6 +22,7 @@ #include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -2787,6 +2790,7 @@ reg = <2>; usb_dp_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; }; }; }; @@ -2945,19 +2949,19 @@ opp-240000000 { opp-hz = /bits/ 64 <240000000>; - required-opps = <&rpmhpd_opp_low_svs_d1>, + required-opps = <&rpmhpd_opp_svs>, <&rpmhpd_opp_low_svs_d1>; }; opp-338000000 { opp-hz = /bits/ 64 <338000000>; - required-opps = <&rpmhpd_opp_low_svs>, + required-opps = <&rpmhpd_opp_svs>, <&rpmhpd_opp_low_svs>; }; opp-420000000 { opp-hz = /bits/ 64 <420000000>; - required-opps = <&rpmhpd_opp_svs>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_svs>; }; @@ -2969,19 +2973,19 @@ opp-533333334 { opp-hz = /bits/ 64 <533333334>; - required-opps = <&rpmhpd_opp_nom>, + required-opps = <&rpmhpd_opp_svs_l1>, <&rpmhpd_opp_nom>; }; opp-570000000 { opp-hz = /bits/ 64 <570000000>; - required-opps = <&rpmhpd_opp_nom_l1>, + required-opps = <&rpmhpd_opp_nom>, <&rpmhpd_opp_nom_l1>; }; opp-630000000 { opp-hz = /bits/ 64 <630000000>; - required-opps = <&rpmhpd_opp_turbo>, + required-opps = <&rpmhpd_opp_nom>, <&rpmhpd_opp_turbo>; }; }; @@ -3001,6 +3005,437 @@ #power-domain-cells = <1>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8750-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x800 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8750-dpu"; + reg = <0x0 0x0ae01000 0x0 0x93000>, + <0x0 0x0aeb0000 0x0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-156000000 { + opp-hz = /bits/ 64 <156000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-207000000 { + opp-hz = /bits/ 64 <207000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-337000000 { + opp-hz = /bits/ 64 <337000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-417000000 { + opp-hz = /bits/ 64 <417000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-532000000 { + opp-hz = /bits/ 64 <532000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&dispcc DISP_CC_ESYNC0_CLK>, + <&dispcc DISP_CC_OSC_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus", + "dsi_pll_pixel", + "dsi_pll_byte", + "esync", + "osc", + "byte_src", + "pixel_src"; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-140630000 { + opp-hz = /bits/ 64 <140630000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,sm8750-dsi-phy-3nm"; + reg = <0x0 0x0ae95000 0x0 0x200>, + <0x0 0x0ae95200 0x0 0x280>, + <0x0 0x0ae95500 0x0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&bi_tcxo_div2>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae96000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&dispcc DISP_CC_ESYNC1_CLK>, + <&dispcc DISP_CC_OSC_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus", + "dsi_pll_pixel", + "dsi_pll_byte", + "esync", + "osc", + "byte_src", + "pixel_src"; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae97000 { + compatible = "qcom,sm8750-dsi-phy-3nm"; + reg = <0x0 0x0ae97000 0x0 0x200>, + <0x0 0x0ae97200 0x0 0x280>, + <0x0 0x0ae97500 0x0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp0: displayport-controller@af54000 { + compatible = "qcom,sm8750-dp", "qcom,sm8650-dp"; + reg = <0x0 0xaf54000 0x0 0x104>, + <0x0 0xaf54200 0x0 0xc0>, + <0x0 0xaf55000 0x0 0x770>, + <0x0 0xaf56000 0x0 0x9c>, + <0x0 0xaf57000 0x0 0x9c>; + + interrupts-extended = <&mdss 12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&dp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&usb_dp_qmpphy_dp_in>; + }; + }; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8750-dispcc"; + reg = <0x0 0x0af00000 0x0 0x20000>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8750-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>; @@ -3013,6 +3448,54 @@ interrupt-controller; }; + tsens0: thermal-sensor@c228000 { + compatible = "qcom,sm8750-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c228000 0x0 0x1000>, + <0x0 0x0c222000 0x0 0x1000>; + interrupts = <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 484 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <15>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c229000 { + compatible = "qcom,sm8750-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c229000 0x0 0x1000>, + <0x0 0x0c223000 0x0 0x1000>; + interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <7>; + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c22a000 { + compatible = "qcom,sm8750-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22a000 0x0 0x1000>, + <0x0 0x0c224000 0x0 0x1000>; + interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c22b000 { + compatible = "qcom,sm8750-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c22b000 0x0 0x1000>, + <0x0 0x0c225000 0x0 0x1000>; + interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + #qcom,sensors = <9>; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-management@c300000 { compatible = "qcom,sm8750-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; @@ -4658,7 +5141,7 @@ gic_its: msi-controller@16040000 { compatible = "arm,gic-v3-its"; - reg = <0x0 0x16040000 0x0 0x20000>; + reg = <0x0 0x16040000 0x0 0x40000>; msi-controller; #msi-cells = <1>; @@ -5459,6 +5942,854 @@ }; }; + thermal-zones { + aoss0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-0-0-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-0-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-0-1-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-0-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-1-0-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-1-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-1-1-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-1-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-2-0-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-2-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-2-1-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-2-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-3-0-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-3-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-3-1-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-3-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-4-0-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-4-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-4-1-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-4-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-5-0-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-5-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-0-5-1-thermal { + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-0-5-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss-0-0-thermal { + thermal-sensors = <&tsens0 13>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpuss-0-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss-0-1-thermal { + thermal-sensors = <&tsens0 14>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpuss-0-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + aoss1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-1-0-0-thermal { + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-1-0-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-1-0-1-thermal { + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-1-0-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-1-1-0-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-1-1-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu-1-1-1-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpu-1-1-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss-1-0-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpuss-1-0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss-1-1-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + cpuss-1-1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + aoss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss2-thermal { + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss3-thermal { + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss4-thermal { + thermal-sensors = <&tsens2 5>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss4-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss5-thermal { + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss5-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss6-thermal { + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss6-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss7-thermal { + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + gpuss7-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem0-thermal { + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + modem0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + modem1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem2-thermal { + thermal-sensors = <&tsens2 11>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + modem2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem3-thermal { + thermal-sensors = <&tsens2 12>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + modem3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens2 13>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + camera0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + thermal-sensors = <&tsens2 14>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + camera1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens2 15>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + video-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss3-thermal { + thermal-sensors = <&tsens3 0>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + aoss3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx0-thermal { + thermal-sensors = <&tsens3 1>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphvx0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx1-thermal { + thermal-sensors = <&tsens3 2>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphvx1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx2-thermal { + thermal-sensors = <&tsens3 3>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphvx2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx0-thermal { + thermal-sensors = <&tsens3 4>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphmx0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx1-thermal { + thermal-sensors = <&tsens3 5>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphmx1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx2-thermal { + thermal-sensors = <&tsens3 6>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphmx2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx3-thermal { + thermal-sensors = <&tsens3 7>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <5000>; + type = "hot"; + }; + + nsphmx3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + thermal-sensors = <&tsens3 8>; + + trips { + trip-point0 { + temperature = <120000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; diff --git a/arch/arm64/boot/dts/qcom/smb2370.dtsi b/arch/arm64/boot/dts/qcom/smb2370.dtsi new file mode 100644 index 000000000000..80f3fdae5705 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/smb2370.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +&spmi_bus2 { + smb2370_j_e2: pmic@9 { + compatible = "qcom,smb2370", "qcom,spmi-pmic"; + reg = <0x9 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2370_j_e2_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2370-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2370_k_e2: pmic@a { + compatible = "qcom,smb2370", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2370_k_e2_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2370-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2370_l_e2: pmic@b { + compatible = "qcom,smb2370", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2370_l_e2_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2370-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi index 75716b4a58d6..9be1e523e9ce 100644 --- a/arch/arm64/boot/dts/qcom/talos.dtsi +++ b/arch/arm64/boot/dts/qcom/talos.dtsi @@ -666,6 +666,9 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; #clock-cells = <1>; #reset-cells = <1>; @@ -2253,6 +2256,14 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + + replicator0_out0: endpoint { + remote-endpoint = <&tmc_etr_in>; + }; + }; + port@1 { reg = <1>; @@ -2287,6 +2298,25 @@ }; }; + tmc@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x06048000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + iommus = <&apps_smmu 0x01e0 0x0>; + arm,scatter-gather; + + in-ports { + port { + tmc_etr_in: endpoint { + remote-endpoint = <&replicator0_out0>; + }; + }; + }; + }; + replicator@604a000 { compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0x0 0x0604a000 0x0 0x1000>; @@ -3958,8 +3988,8 @@ dp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; required-opps = <&rpmhpd_opp_low_svs>; }; @@ -4486,9 +4516,9 @@ status = "disabled"; }; - usb_1: usb@a6f8800 { - compatible = "qcom,qcs615-dwc3", "qcom,dwc3"; - reg = <0x0 0x0a6f8800 0x0 0x400>; + usb_1: usb@a600000 { + compatible = "qcom,qcs615-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, @@ -4507,52 +4537,46 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>, + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>, <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>, <&pdc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event", + interrupt-names = "dwc_usb3", + "pwr_event", "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; + iommus = <&apps_smmu 0x140 0x0>; + + phys = <&usb_1_hsphy>, <&usb_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + power-domains = <&gcc USB30_PRIM_GDSC>; required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_PRIM_BCR>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - usb_1_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0x0 0x0a600000 0x0 0xcd00>; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; - iommus = <&apps_smmu 0x140 0x0>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>; + wakeup-source; - phys = <&usb_1_hsphy>, <&usb_qmpphy>; - phy-names = "usb2-phy", "usb3-phy"; - - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,has-lpm-erratum; - snps,hird-threshold = /bits/ 8 <0x10>; - snps,usb3_lpm_capable; - }; + status = "disabled"; }; - usb_2: usb@a8f8800 { - compatible = "qcom,qcs615-dwc3", "qcom,dwc3"; - reg = <0x0 0x0a8f8800 0x0 0x400>; + usb_2: usb@a800000 { + compatible = "qcom,qcs615-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a800000 0x0 0xfc100>; clocks = <&gcc GCC_CFG_NOC_USB2_SEC_AXI_CLK>, <&gcc GCC_USB20_SEC_MASTER_CLK>, @@ -4571,15 +4595,22 @@ <&gcc GCC_USB20_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH 0>, + interrupts-extended = <&intc GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>, + <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH 0>, <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH 0>, <&pdc 11 IRQ_TYPE_EDGE_BOTH>, <&pdc 10 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "pwr_event", + interrupt-names = "dwc_usb3", + "pwr_event", "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq"; + iommus = <&apps_smmu 0xe0 0x0>; + + phys = <&usb_hsphy_2>; + phy-names = "usb2-phy"; + power-domains = <&gcc USB20_SEC_GDSC>; required-opps = <&rpmhpd_opp_nom>; @@ -4587,30 +4618,16 @@ qcom,select-utmi-as-pipe-clk; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; - usb_2_dwc3: usb@a800000 { - compatible = "snps,dwc3"; - reg = <0x0 0x0a800000 0x0 0xcd00>; + maximum-speed = "high-speed"; + wakeup-source; - iommus = <&apps_smmu 0xe0 0x0>; - interrupts = <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>; - - phys = <&usb_hsphy_2>; - phy-names = "usb2-phy"; - - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,has-lpm-erratum; - snps,hird-threshold = /bits/ 8 <0x10>; - - maximum-speed = "high-speed"; - }; + status = "disabled"; }; tsens0: thermal-sensor@c263000 { @@ -4714,10 +4731,10 @@ arch_timer: timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, - <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, - <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW 0>; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/x1-asus-vivobook-s15.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-vivobook-s15.dtsi new file mode 100644 index 000000000000..48c4ad648354 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1-asus-vivobook-s15.dtsi @@ -0,0 +1,1356 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "hamoa-pmics.dtsi" + +/ { + chassis-type = "laptop"; + + aliases { + serial1 = &uart14; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + hdmi-bridge { + compatible = "parade,ps185hdm"; + + pinctrl-0 = <&hdmi_hpd_default>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_bridge_dp_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_bridge_tmds_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_bridge_tmds_out>; + }; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Left-side port, closer to the screen */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + + /* Left-side port, farther from the screen */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the CRD mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_en>, <&wcn_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + eusb5_repeater: redriver@43 { + compatible = "nxp,ptn3222"; + reg = <0x43>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb5_reset_n>; + pinctrl-names = "default"; + }; + + eusb3_repeater: redriver@47 { + compatible = "nxp,ptn3222"; + reg = <0x47>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb3_reset_n>; + pinctrl-names = "default"; + }; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; + + /* EC @ 0x76 */ +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp2 { + status = "okay"; +}; + +&mdss_dp2_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + pinctrl-0 = <&edp0_hpd_default>; + pinctrl-names = "default"; + + status = "okay"; + + aux-bus { + panel { + compatible = "samsung,atna56ac03", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_3p3>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; +}; + +&mdss_dp3_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie6a { + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>; + bias-pull-down; + input-disable; + output-enable; + }; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + eusb3_reset_n: eusb3-reset-n-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + + eusb5_reset_n: eusb5-reset-n-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + + hdmi_hpd_default: hdmi-hpd-default-state { + pins = "gpio126"; + function = "usb2_dp"; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + wcn_bt_en: wcn-bt-en-state { + pins = "gpio116"; + function = "gpio"; + drive-strength = <16>; + bias-pull-down; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + wcn_wlan_en: wcn-wlan-en-state { + pins = "gpio117"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss0 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + /delete-property/ mode-switch; + /delete-property/ orientation-switch; + + status = "okay"; + + ports { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + /delete-node/ endpoint; + + usb_1_ss2_qmpphy_out_dp: endpoint@0 { + reg = <0>; + + data-lanes = <3 2 1 0>; + remote-endpoint = <&hdmi_bridge_dp_in>; + }; + + /* No USB3 lanes connected */ + }; + }; +}; + +&usb_2 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb5_repeater>; + + status = "okay"; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb3_repeater>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi index 8e5c5575a532..cd062f844b2d 100644 --- a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi @@ -63,6 +63,45 @@ }; }; + hdmi-bridge { + compatible = "parade,ps185hdm"; + + pinctrl-0 = <&hdmi_hpd_default>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_bridge_dp_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_bridge_tmds_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_bridge_tmds_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -995,6 +1034,14 @@ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; +&mdss_dp2 { + status = "okay"; +}; + +&mdss_dp2_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + &mdss_dp3 { /delete-property/ #sound-dai-cells; @@ -1253,6 +1300,12 @@ bias-disable; }; + hdmi_hpd_default: hdmi-hpd-default-state { + pins = "gpio126"; + function = "usb2_dp"; + bias-disable; + }; + hdtl_default: hdtl-default-state { pins = "gpio95"; function = "gpio"; @@ -1404,11 +1457,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1436,11 +1487,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { @@ -1451,6 +1500,32 @@ remote-endpoint = <&retimer_ss1_ss_in>; }; +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + /delete-property/ mode-switch; + /delete-property/ orientation-switch; + + status = "okay"; + + ports { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + /delete-node/ endpoint; + + usb_1_ss2_qmpphy_out_dp: endpoint@0 { + reg = <0>; + + data-lanes = <3 2 1 0>; + remote-endpoint = <&hdmi_bridge_dp_in>; + }; + }; + }; +}; + &usb_mp { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi index ded96fb43489..485dcd946757 100644 --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -226,6 +226,38 @@ "VA DMIC3", "MIC BIAS1", "TX SWR_INPUT1", "ADC2_OUTPUT"; + displayport-0-dai-link { + link-name = "DisplayPort0 Playback"; + + codec { + sound-dai = <&mdss_dp0>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + displayport-1-dai-link { + link-name = "DisplayPort1 Playback"; + + codec { + sound-dai = <&mdss_dp1>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_1>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + wcd-playback-dai-link { link-name = "WCD Playback"; @@ -1703,11 +1735,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1735,11 +1765,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { @@ -1767,11 +1795,9 @@ }; &usb_1_ss2 { - status = "okay"; -}; - -&usb_1_ss2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss2_dwc3_hs { diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi index bf04a12b16bc..343844cc62f2 100644 --- a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi @@ -1552,11 +1552,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1584,11 +1582,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { @@ -1616,11 +1612,9 @@ }; &usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_2_hsphy { diff --git a/arch/arm64/boot/dts/qcom/x1-el2.dtso b/arch/arm64/boot/dts/qcom/x1-el2.dtso index 175679be01eb..ee006742d6f3 100644 --- a/arch/arm64/boot/dts/qcom/x1-el2.dtso +++ b/arch/arm64/boot/dts/qcom/x1-el2.dtso @@ -52,6 +52,14 @@ status = "okay"; }; +&remoteproc_adsp { + iommus = <&apps_smmu 0x1000 0x80>; +}; + +&remoteproc_cdsp { + iommus = <&apps_smmu 0x0c00 0x0>; +}; + /* * The "SBSA watchdog" is implemented in software in Gunyah * and can't be used when running in EL2. diff --git a/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi index a4075434162a..16437139d336 100644 --- a/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi @@ -1471,11 +1471,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1503,11 +1501,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { @@ -1519,12 +1515,10 @@ }; &usb_mp { - status = "okay"; -}; - -&usb_mp_dwc3 { phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>; phy-names = "usb2-0", "usb3-0"; + + status = "okay"; }; &usb_mp_hsphy0 { diff --git a/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi b/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi index d77be02848b5..1341fa140d69 100644 --- a/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi @@ -718,11 +718,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_microcode_mem>; - firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; }; &i2c0 { @@ -1274,11 +1273,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1306,11 +1303,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts index d5a60671a383..2e38402e2c14 100644 --- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -1389,12 +1389,10 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "otg"; usb-role-switch; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1422,11 +1420,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { @@ -1454,11 +1450,9 @@ }; &usb_1_ss2 { - status = "okay"; -}; - -&usb_1_ss2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss2_dwc3_hs { diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 4d7fd51f370b..5d49df41be02 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -1608,11 +1608,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1640,11 +1638,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { @@ -1684,11 +1680,9 @@ }; &usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_2_hsphy { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts index 17269eb0638a..519bcbc98985 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -6,1024 +6,22 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/gpio-keys.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - #include "hamoa.dtsi" -#include "hamoa-pmics.dtsi" +#include "x1-asus-vivobook-s15.dtsi" / { model = "ASUS Vivobook S 15"; compatible = "asus,vivobook-s15", "qcom,x1e80100"; chassis-type = "laptop"; - - aliases { - serial1 = &uart14; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&hall_int_n_default>; - pinctrl-names = "default"; - - switch-lid { - gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_SW>; - linux,code = <SW_LID>; - wakeup-source; - wakeup-event-action = <EV_ACT_DEASSERTED>; - }; - }; - - hdmi-bridge { - compatible = "parade,ps185hdm"; - - pinctrl-0 = <&hdmi_hpd_default>; - pinctrl-names = "default"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - hdmi_bridge_dp_in: endpoint { - remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_bridge_tmds_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&hdmi_bridge_tmds_out>; - }; - }; - }; - - pmic-glink { - compatible = "qcom,x1e80100-pmic-glink", - "qcom,sm8550-pmic-glink", - "qcom,pmic-glink"; - orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, - <&tlmm 123 GPIO_ACTIVE_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - /* Left-side port, closer to the screen */ - connector@0 { - compatible = "usb-c-connector"; - reg = <0>; - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_ss0_hs_in: endpoint { - remote-endpoint = <&usb_1_ss0_dwc3_hs>; - }; - }; - - port@1 { - reg = <1>; - - pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&retimer_ss0_ss_out>; - }; - }; - - port@2 { - reg = <2>; - - pmic_glink_ss0_con_sbu_in: endpoint { - remote-endpoint = <&retimer_ss0_con_sbu_out>; - }; - }; - }; - }; - - /* Left-side port, farther from the screen */ - connector@1 { - compatible = "usb-c-connector"; - reg = <1>; - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_ss1_hs_in: endpoint { - remote-endpoint = <&usb_1_ss1_dwc3_hs>; - }; - }; - - port@1 { - reg = <1>; - - pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&retimer_ss1_ss_out>; - }; - }; - - port@2 { - reg = <2>; - - pmic_glink_ss1_con_sbu_in: endpoint { - remote-endpoint = <&retimer_ss1_con_sbu_out>; - }; - }; - }; - }; - }; - - reserved-memory { - linux,cma { - compatible = "shared-dma-pool"; - size = <0x0 0x8000000>; - reusable; - linux,cma-default; - }; - }; - - vreg_edp_3p3: regulator-edp-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_EDP_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&edp_reg_en>; - pinctrl-names = "default"; - - regulator-always-on; - regulator-boot-on; - }; - - vreg_nvme: regulator-nvme { - compatible = "regulator-fixed"; - - regulator-name = "VREG_NVME_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&nvme_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_1p15: regulator-rtmr0-1p15 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR0_1P15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - - gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb0_pwr_1p15_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_1p8: regulator-rtmr0-1p8 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR0_1P8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb0_1p8_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_3p3: regulator-rtmr0-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR0_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb0_3p3_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr1_1p15: regulator-rtmr1-1p15 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR1_1P15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - - gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb1_pwr_1p15_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr1_1p8: regulator-rtmr1-1p8 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR1_1P8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb1_pwr_1p8_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr1_3p3: regulator-rtmr1-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR1_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb1_pwr_3p3_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vph_pwr: regulator-vph-pwr { - compatible = "regulator-fixed"; - - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - - regulator-always-on; - regulator-boot-on; - }; - - /* - * TODO: These two regulators are actually part of the removable M.2 - * card and not the CRD mainboard. Need to describe this differently. - * Functionally it works correctly, because all we need to do is to - * turn on the actual 3.3V supply above. - */ - vreg_wcn_0p95: regulator-wcn-0p95 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_WCN_0P95"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - - vin-supply = <&vreg_wcn_3p3>; - }; - - vreg_wcn_1p9: regulator-wcn-1p9 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_WCN_1P9"; - regulator-min-microvolt = <1900000>; - regulator-max-microvolt = <1900000>; - - vin-supply = <&vreg_wcn_3p3>; - }; - - vreg_wcn_3p3: regulator-wcn-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_WCN_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&wcn_sw_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - wcn7850-pmu { - compatible = "qcom,wcn7850-pmu"; - - vdd-supply = <&vreg_wcn_0p95>; - vddio-supply = <&vreg_l15b_1p8>; - vddaon-supply = <&vreg_wcn_0p95>; - vdddig-supply = <&vreg_wcn_0p95>; - vddrfa1p2-supply = <&vreg_wcn_1p9>; - vddrfa1p8-supply = <&vreg_wcn_1p9>; - - wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; - bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&wcn_wlan_en>, <&wcn_bt_en>; - pinctrl-names = "default"; - - regulators { - vreg_pmu_rfa_cmn: ldo0 { - regulator-name = "vreg_pmu_rfa_cmn"; - }; - - vreg_pmu_aon_0p59: ldo1 { - regulator-name = "vreg_pmu_aon_0p59"; - }; - - vreg_pmu_wlcx_0p8: ldo2 { - regulator-name = "vreg_pmu_wlcx_0p8"; - }; - - vreg_pmu_wlmx_0p85: ldo3 { - regulator-name = "vreg_pmu_wlmx_0p85"; - }; - - vreg_pmu_btcmx_0p85: ldo4 { - regulator-name = "vreg_pmu_btcmx_0p85"; - }; - - vreg_pmu_rfa_0p8: ldo5 { - regulator-name = "vreg_pmu_rfa_0p8"; - }; - - vreg_pmu_rfa_1p2: ldo6 { - regulator-name = "vreg_pmu_rfa_1p2"; - }; - - vreg_pmu_rfa_1p8: ldo7 { - regulator-name = "vreg_pmu_rfa_1p8"; - }; - - vreg_pmu_pcie_0p9: ldo8 { - regulator-name = "vreg_pmu_pcie_0p9"; - }; - - vreg_pmu_pcie_1p8: ldo9 { - regulator-name = "vreg_pmu_pcie_1p8"; - }; - }; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pm8550-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-bob1-supply = <&vph_pwr>; - vdd-bob2-supply = <&vph_pwr>; - vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; - vdd-l2-l13-l14-supply = <&vreg_bob1>; - vdd-l5-l16-supply = <&vreg_bob1>; - vdd-l6-l7-supply = <&vreg_bob2>; - vdd-l8-l9-supply = <&vreg_bob1>; - vdd-l12-supply = <&vreg_s5j_1p2>; - vdd-l15-supply = <&vreg_s4c_1p8>; - vdd-l17-supply = <&vreg_bob2>; - - vreg_bob1: bob1 { - regulator-name = "vreg_bob1"; - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_bob2: bob2 { - regulator-name = "vreg_bob2"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <3008000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2b_3p0: ldo2 { - regulator-name = "vreg_l2b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4b_1p8: ldo4 { - regulator-name = "vreg_l4b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l13b_3p0: ldo13 { - regulator-name = "vreg_l13b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l14b_3p0: ldo14 { - regulator-name = "vreg_l14b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l15b_1p8: ldo15 { - regulator-name = "vreg_l15b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-1 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-l1-supply = <&vreg_s5j_1p2>; - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s4-supply = <&vph_pwr>; - - vreg_l3c_0p8: ldo3 { - regulator-name = "vreg_l3c_0p8"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s4c_1p8: smps4 { - regulator-name = "vreg_s4c_1p8"; - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-2 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "d"; - - vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s4c_1p8>; - vdd-s1-supply = <&vph_pwr>; - - vreg_l1d_0p8: ldo1 { - regulator-name = "vreg_l1d_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2d_0p9: ldo2 { - regulator-name = "vreg_l2d_0p9"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3d_1p8: ldo3 { - regulator-name = "vreg_l3d_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-3 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "e"; - - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s5j_1p2>; - - vreg_l2e_0p8: ldo2 { - regulator-name = "vreg_l2e_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3e_1p2: ldo3 { - regulator-name = "vreg_l3e_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-4 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "f"; - - vdd-l1-supply = <&vreg_s5j_1p2>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s5j_1p2>; - vdd-s1-supply = <&vph_pwr>; - - vreg_s1f_0p7: smps1 { - regulator-name = "vreg_s1f_0p7"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-6 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "i"; - - vdd-l1-supply = <&vreg_s4c_1p8>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - - vreg_l3i_0p8: ldo3 { - regulator-name = "vreg_l3i_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-7 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "j"; - - vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s5-supply = <&vph_pwr>; - - vreg_s5j_1p2: smps5 { - regulator-name = "vreg_s5j_1p2"; - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1j_0p8: ldo1 { - regulator-name = "vreg_l1j_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2j_1p2: ldo2 { - regulator-name = "vreg_l2j_1p2"; - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1256000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3j_0p8: ldo3 { - regulator-name = "vreg_l3j_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; -}; - -&gpu { - status = "okay"; }; &gpu_zap_shader { firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; }; -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - touchpad@15 { - compatible = "hid-over-i2c"; - reg = <0x15>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-0 = <&tpad_default>; - pinctrl-names = "default"; - - wakeup-source; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - status = "okay"; -}; - -&i2c3 { - clock-frequency = <400000>; - status = "okay"; - - typec-mux@8 { - compatible = "parade,ps8830"; - reg = <0x08>; - - clocks = <&rpmhcc RPMH_RF_CLK3>; - - vdd-supply = <&vreg_rtmr0_1p15>; - vdd33-supply = <&vreg_rtmr0_3p3>; - vdd33-cap-supply = <&vreg_rtmr0_3p3>; - vddar-supply = <&vreg_rtmr0_1p15>; - vddat-supply = <&vreg_rtmr0_1p15>; - vddio-supply = <&vreg_rtmr0_1p8>; - - reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&rtmr0_default>; - pinctrl-names = "default"; - - orientation-switch; - retimer-switch; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - retimer_ss0_ss_out: endpoint { - remote-endpoint = <&pmic_glink_ss0_ss_in>; - }; - }; - - port@1 { - reg = <1>; - - retimer_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; - }; - }; - - port@2 { - reg = <2>; - - retimer_ss0_con_sbu_out: endpoint { - remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; - }; - }; - }; - }; -}; - -&i2c5 { - clock-frequency = <400000>; - status = "okay"; - - keyboard@3a { - compatible = "hid-over-i2c"; - reg = <0x3a>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-0 = <&kybd_default>; - pinctrl-names = "default"; - - wakeup-source; - }; - - eusb5_repeater: redriver@43 { - compatible = "nxp,ptn3222"; - reg = <0x43>; - #phy-cells = <0>; - - vdd3v3-supply = <&vreg_l13b_3p0>; - vdd1v8-supply = <&vreg_l4b_1p8>; - - reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&eusb5_reset_n>; - pinctrl-names = "default"; - }; - - eusb3_repeater: redriver@47 { - compatible = "nxp,ptn3222"; - reg = <0x47>; - #phy-cells = <0>; - - vdd3v3-supply = <&vreg_l13b_3p0>; - vdd1v8-supply = <&vreg_l4b_1p8>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&eusb3_reset_n>; - pinctrl-names = "default"; - }; - - eusb6_repeater: redriver@4f { - compatible = "nxp,ptn3222"; - reg = <0x4f>; - #phy-cells = <0>; - - vdd3v3-supply = <&vreg_l13b_3p0>; - vdd1v8-supply = <&vreg_l4b_1p8>; - - reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&eusb6_reset_n>; - pinctrl-names = "default"; - }; - - /* EC @ 0x76 */ -}; - -&i2c7 { - clock-frequency = <400000>; - status = "okay"; - - typec-mux@8 { - compatible = "parade,ps8830"; - reg = <0x8>; - - clocks = <&rpmhcc RPMH_RF_CLK4>; - - vdd-supply = <&vreg_rtmr1_1p15>; - vdd33-supply = <&vreg_rtmr1_3p3>; - vdd33-cap-supply = <&vreg_rtmr1_3p3>; - vddar-supply = <&vreg_rtmr1_1p15>; - vddat-supply = <&vreg_rtmr1_1p15>; - vddio-supply = <&vreg_rtmr1_1p8>; - - reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&rtmr1_default>; - pinctrl-names = "default"; - - retimer-switch; - orientation-switch; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - retimer_ss1_ss_out: endpoint { - remote-endpoint = <&pmic_glink_ss1_ss_in>; - }; - }; - - port@1 { - reg = <1>; - - retimer_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; - }; - }; - - port@2 { - reg = <2>; - - retimer_ss1_con_sbu_out: endpoint { - remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; - }; - }; - }; - }; -}; - &iris { firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn"; - status = "okay"; -}; -&mdss { - status = "okay"; -}; - -&mdss_dp0 { - status = "okay"; -}; - -&mdss_dp0_out { - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; -}; - -&mdss_dp1 { - status = "okay"; -}; - -&mdss_dp1_out { - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; -}; - -&mdss_dp2 { - status = "okay"; -}; - -&mdss_dp2_out { - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; -}; - -&mdss_dp3 { - /delete-property/ #sound-dai-cells; - - pinctrl-0 = <&edp0_hpd_default>; - pinctrl-names = "default"; - - status = "okay"; - - aux-bus { - panel { - compatible = "samsung,atna56ac03", "samsung,atna33xc20"; - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; - power-supply = <&vreg_edp_3p3>; - - pinctrl-0 = <&edp_bl_en>; - pinctrl-names = "default"; - - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss_dp3_out>; - }; - }; - }; - }; -}; - -&mdss_dp3_out { - data-lanes = <0 1 2 3>; - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; - - remote-endpoint = <&edp_panel_in>; -}; - -&mdss_dp3_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; - vdda-pll-supply = <&vreg_l2j_1p2>; - - status = "okay"; -}; - -&pcie4 { - pinctrl-0 = <&pcie4_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie4_phy { - vdda-phy-supply = <&vreg_l3i_0p8>; - vdda-pll-supply = <&vreg_l3e_1p2>; - - status = "okay"; -}; - -&pcie4_port0 { - reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - - wifi@0 { - compatible = "pci17cb,1107"; - reg = <0x10000 0x0 0x0 0x0 0x0>; - - vddaon-supply = <&vreg_pmu_aon_0p59>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; - vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; - vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; - }; -}; - -&pcie6a { - vddpe-3v3-supply = <&vreg_nvme>; - - pinctrl-0 = <&pcie6a_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie6a_phy { - vdda-phy-supply = <&vreg_l1d_0p8>; - vdda-pll-supply = <&vreg_l2j_1p2>; - - status = "okay"; -}; - -&pcie6a_port0 { - reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; -}; - -&pm8550_gpios { - rtmr0_default: rtmr0-reset-n-active-state { - pins = "gpio10"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; - - usb0_3p3_reg_en: usb0-3p3-reg-en-state { - pins = "gpio11"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&pm8550ve_9_gpios { - usb0_1p8_reg_en: usb0-1p8-reg-en-state { - pins = "gpio8"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&pmc8380_3_gpios { - edp_bl_en: edp-bl-en-state { - pins = "gpio4"; - function = "normal"; - power-source = <1>; /* 1.8 V */ - qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>; - bias-pull-down; - input-disable; - output-enable; - }; -}; - -&pmc8380_5_gpios { - usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { - pins = "gpio8"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&qupv3_0 { - status = "okay"; -}; - -&qupv3_1 { - status = "okay"; -}; - -&qupv3_2 { status = "okay"; }; @@ -1041,345 +39,3 @@ status = "okay"; }; -&smb2360_0 { - status = "okay"; -}; - -&smb2360_0_eusb2_repeater { - vdd18-supply = <&vreg_l3d_1p8>; - vdd3-supply = <&vreg_l2b_3p0>; -}; - -&smb2360_1 { - status = "okay"; -}; - -&smb2360_1_eusb2_repeater { - vdd18-supply = <&vreg_l3d_1p8>; - vdd3-supply = <&vreg_l14b_3p0>; -}; - -&tlmm { - gpio-reserved-ranges = <34 2>, /* Unused */ - <44 4>, /* SPI (TPM) */ - <238 1>; /* UFS Reset */ - - edp_reg_en: edp-reg-en-state { - pins = "gpio70"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - eusb3_reset_n: eusb3-reset-n-state { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - output-low; - }; - - eusb5_reset_n: eusb5-reset-n-state { - pins = "gpio7"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - output-low; - }; - - eusb6_reset_n: eusb6-reset-n-state { - pins = "gpio184"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - output-low; - }; - - hall_int_n_default: hall-int-n-state { - pins = "gpio92"; - function = "gpio"; - bias-disable; - }; - - hdmi_hpd_default: hdmi-hpd-default-state { - pins = "gpio126"; - function = "usb2_dp"; - bias-disable; - }; - - kybd_default: kybd-default-state { - pins = "gpio67"; - function = "gpio"; - bias-disable; - }; - - nvme_reg_en: nvme-reg-en-state { - pins = "gpio18"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - pcie4_default: pcie4-default-state { - clkreq-n-pins { - pins = "gpio147"; - function = "pcie4_clk"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio146"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-n-pins { - pins = "gpio148"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie6a_default: pcie6a-default-state { - clkreq-n-pins { - pins = "gpio153"; - function = "pcie6a_clk"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio152"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-n-pins { - pins = "gpio154"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - rtmr1_default: rtmr1-reset-n-active-state { - pins = "gpio176"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - tpad_default: tpad-default-state { - pins = "gpio3"; - function = "gpio"; - bias-disable; - }; - - usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { - pins = "gpio188"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { - pins = "gpio175"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { - pins = "gpio186"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - wcn_bt_en: wcn-bt-en-state { - pins = "gpio116"; - function = "gpio"; - drive-strength = <16>; - bias-pull-down; - }; - - wcn_sw_en: wcn-sw-en-state { - pins = "gpio214"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - wcn_wlan_en: wcn-wlan-en-state { - pins = "gpio117"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; -}; - -&uart14 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn7850-bt"; - max-speed = <3200000>; - - vddaon-supply = <&vreg_pmu_aon_0p59>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; - }; -}; - -&usb_1_ss0_hsphy { - vdd-supply = <&vreg_l3j_0p8>; - vdda12-supply = <&vreg_l2j_1p2>; - - phys = <&smb2360_0_eusb2_repeater>; - - status = "okay"; -}; - -&usb_1_ss0_qmpphy { - vdda-phy-supply = <&vreg_l2j_1p2>; - vdda-pll-supply = <&vreg_l1j_0p8>; - - status = "okay"; -}; - -&usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { - dr_mode = "host"; -}; - -&usb_1_ss0_dwc3_hs { - remote-endpoint = <&pmic_glink_ss0_hs_in>; -}; - -&usb_1_ss0_qmpphy_out { - remote-endpoint = <&retimer_ss0_ss_in>; -}; - -&usb_1_ss1_hsphy { - vdd-supply = <&vreg_l3j_0p8>; - vdda12-supply = <&vreg_l2j_1p2>; - - phys = <&smb2360_1_eusb2_repeater>; - - status = "okay"; -}; - -&usb_1_ss1_qmpphy { - vdda-phy-supply = <&vreg_l2j_1p2>; - vdda-pll-supply = <&vreg_l2d_0p9>; - - status = "okay"; -}; - -&usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_ss1_dwc3_hs { - remote-endpoint = <&pmic_glink_ss1_hs_in>; -}; - -&usb_1_ss1_qmpphy_out { - remote-endpoint = <&retimer_ss1_ss_in>; -}; - -&usb_1_ss2_qmpphy { - vdda-phy-supply = <&vreg_l2j_1p2>; - vdda-pll-supply = <&vreg_l2d_0p9>; - - /delete-property/ mode-switch; - /delete-property/ orientation-switch; - - status = "okay"; - - ports { - port@0 { - #address-cells = <1>; - #size-cells = <0>; - - /delete-node/ endpoint; - - usb_1_ss2_qmpphy_out_dp: endpoint@0 { - reg = <0>; - - data-lanes = <3 2 1 0>; - remote-endpoint = <&hdmi_bridge_dp_in>; - }; - - /* No USB3 lanes connected */ - }; - }; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; - - phys = <&eusb5_repeater>; - - status = "okay"; -}; - -&usb_mp { - status = "okay"; -}; - -&usb_mp_hsphy0 { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; - - phys = <&eusb3_repeater>; - - status = "okay"; -}; - -&usb_mp_hsphy1 { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; - - phys = <&eusb6_repeater>; - - status = "okay"; -}; - -&usb_mp_qmpphy0 { - vdda-phy-supply = <&vreg_l3e_1p2>; - vdda-pll-supply = <&vreg_l3c_0p8>; - - status = "okay"; -}; - -&usb_mp_qmpphy1 { - vdda-phy-supply = <&vreg_l3e_1p2>; - vdda-pll-supply = <&vreg_l3c_0p8>; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts index 4c95b1af2c64..ce7b10ea89b6 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -1293,11 +1293,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1325,11 +1323,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index d6472e5a3f9f..bd0e3009fb41 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -1571,11 +1571,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1603,11 +1601,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { @@ -1635,11 +1631,9 @@ }; &usb_1_ss2 { - status = "okay"; -}; - -&usb_1_ss2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss2_dwc3_hs { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts b/arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts index 20a33e6f27ee..3724d15c1fd0 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts @@ -791,10 +791,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/Medion/sprchrgd-14-s1/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/Medion/sprchrgd-14-s1/qcdxkmsuc8380.mbn"; }; &i2c0 { @@ -1413,11 +1413,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1458,11 +1456,9 @@ /* Camera */ &usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_2_hsphy { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi index 37539a09b76e..28342cb84ded 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi @@ -864,7 +864,6 @@ }; &gpu_zap_shader { - memory-region = <&gpu_microcode_mem>; firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; }; @@ -1499,11 +1498,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1531,11 +1528,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 1d402ef86512..8afbac349cc9 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -1423,11 +1423,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1455,11 +1453,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { @@ -1487,11 +1483,9 @@ }; &usb_1_ss2 { - status = "okay"; -}; - -&usb_1_ss2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss2_dwc3_hs { diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-vivobook-s15.dts new file mode 100644 index 000000000000..63e29d2cc4ab --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-vivobook-s15.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com> + */ + +/dts-v1/; + +#include "purwa.dtsi" +#include "x1-asus-vivobook-s15.dtsi" + +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + model = "ASUS Vivobook S 15 X1P-42-100"; + compatible = "asus,vivobook-s15-x1p4", "qcom,x1p42100"; + chassis-type = "laptop"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1p42100/ASUSTeK/vivobook-s15/qcdxkmsucpurwa.mbn"; +}; + +&iris { + firmware-name = "qcom/x1p42100/ASUSTeK/vivobook-s15/qcvss8380.mbn"; + + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1p42100/ASUSTeK/vivobook-s15/qcadsp8380.mbn", + "qcom/x1p42100/ASUSTeK/vivobook-s15/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1p42100/ASUSTeK/vivobook-s15/qccdsp8380.mbn", + "qcom/x1p42100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts index 1e5eb8c5dc98..ab309d547ed5 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts @@ -1566,11 +1566,9 @@ }; &usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss0_dwc3_hs { @@ -1598,11 +1596,9 @@ }; &usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_1_ss1_dwc3_hs { @@ -1614,15 +1610,12 @@ }; &usb_1_ss2 { - status = "okay"; -}; - -&usb_1_ss2_dwc3 { dr_mode = "host"; maximum-speed = "high-speed"; phys = <&usb_1_ss2_hsphy>; phy-names = "usb2-phy"; + status = "okay"; /delete-property/ port@1; }; @@ -1662,11 +1655,9 @@ }; &usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { dr_mode = "host"; + + status = "okay"; }; &usb_2_hsphy { diff --git a/include/dt-bindings/clock/qcom,dispcc-sm6125.h b/include/dt-bindings/clock/qcom,dispcc-sm6125.h index 4ff974f4fcc3..f58b85d2c814 100644 --- a/include/dt-bindings/clock/qcom,dispcc-sm6125.h +++ b/include/dt-bindings/clock/qcom,dispcc-sm6125.h @@ -6,6 +6,7 @@ #ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6125_H #define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6125_H +/* Clocks */ #define DISP_CC_PLL0 0 #define DISP_CC_MDSS_AHB_CLK 1 #define DISP_CC_MDSS_AHB_CLK_SRC 2 @@ -35,7 +36,10 @@ #define DISP_CC_MDSS_VSYNC_CLK_SRC 26 #define DISP_CC_XO_CLK 27 -/* DISP_CC GDSCR */ +/* Resets */ +#define DISP_CC_MDSS_CORE_BCR 0 + +/* GDSCs */ #define MDSS_GDSC 0 #endif diff --git a/include/dt-bindings/clock/qcom,eliza-gcc.h b/include/dt-bindings/clock/qcom,eliza-gcc.h new file mode 100644 index 000000000000..4d27b329ae99 --- /dev/null +++ b/include/dt-bindings/clock/qcom,eliza-gcc.h @@ -0,0 +1,210 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_ELIZA_H +#define _DT_BINDINGS_CLK_QCOM_GCC_ELIZA_H + +/* GCC clocks */ +#define GCC_AGGRE_NOC_PCIE_AXI_CLK 0 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 1 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 2 +#define GCC_BOOT_ROM_AHB_CLK 3 +#define GCC_CAM_BIST_MCLK_AHB_CLK 4 +#define GCC_CAMERA_AHB_CLK 5 +#define GCC_CAMERA_HF_AXI_CLK 6 +#define GCC_CAMERA_SF_AXI_CLK 7 +#define GCC_CAMERA_XO_CLK 8 +#define GCC_CFG_NOC_PCIE_ANOC_AHB_CLK 9 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 10 +#define GCC_CNOC_PCIE_SF_AXI_CLK 11 +#define GCC_DDRSS_GPU_AXI_CLK 12 +#define GCC_DDRSS_PCIE_SF_QTB_CLK 13 +#define GCC_DISP_AHB_CLK 14 +#define GCC_DISP_HF_AXI_CLK 15 +#define GCC_GP1_CLK 16 +#define GCC_GP1_CLK_SRC 17 +#define GCC_GP2_CLK 18 +#define GCC_GP2_CLK_SRC 19 +#define GCC_GP3_CLK 20 +#define GCC_GP3_CLK_SRC 21 +#define GCC_GPLL0 22 +#define GCC_GPLL0_OUT_EVEN 23 +#define GCC_GPLL4 24 +#define GCC_GPLL7 25 +#define GCC_GPLL8 26 +#define GCC_GPLL9 27 +#define GCC_GPU_CFG_AHB_CLK 28 +#define GCC_GPU_GEMNOC_GFX_CLK 29 +#define GCC_GPU_GPLL0_CPH_CLK_SRC 30 +#define GCC_GPU_GPLL0_DIV_CPH_CLK_SRC 31 +#define GCC_GPU_SMMU_VOTE_CLK 32 +#define GCC_MMU_TCU_VOTE_CLK 33 +#define GCC_PCIE_0_AUX_CLK 34 +#define GCC_PCIE_0_AUX_CLK_SRC 35 +#define GCC_PCIE_0_CFG_AHB_CLK 36 +#define GCC_PCIE_0_MSTR_AXI_CLK 37 +#define GCC_PCIE_0_PHY_RCHNG_CLK 38 +#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 39 +#define GCC_PCIE_0_PIPE_CLK 40 +#define GCC_PCIE_0_PIPE_CLK_SRC 41 +#define GCC_PCIE_0_PIPE_DIV2_CLK 42 +#define GCC_PCIE_0_PIPE_DIV2_CLK_SRC 43 +#define GCC_PCIE_0_SLV_AXI_CLK 44 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 45 +#define GCC_PCIE_1_AUX_CLK 46 +#define GCC_PCIE_1_AUX_CLK_SRC 47 +#define GCC_PCIE_1_CFG_AHB_CLK 48 +#define GCC_PCIE_1_MSTR_AXI_CLK 49 +#define GCC_PCIE_1_PHY_RCHNG_CLK 50 +#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 51 +#define GCC_PCIE_1_PIPE_CLK 52 +#define GCC_PCIE_1_PIPE_CLK_SRC 53 +#define GCC_PCIE_1_PIPE_DIV2_CLK 54 +#define GCC_PCIE_1_PIPE_DIV2_CLK_SRC 55 +#define GCC_PCIE_1_SLV_AXI_CLK 56 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 57 +#define GCC_PCIE_RSCC_CFG_AHB_CLK 58 +#define GCC_PCIE_RSCC_XO_CLK 59 +#define GCC_PDM2_CLK 60 +#define GCC_PDM2_CLK_SRC 61 +#define GCC_PDM_AHB_CLK 62 +#define GCC_PDM_XO4_CLK 63 +#define GCC_QMIP_CAMERA_CMD_AHB_CLK 64 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 65 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 66 +#define GCC_QMIP_GPU_AHB_CLK 67 +#define GCC_QMIP_PCIE_AHB_CLK 68 +#define GCC_QMIP_VIDEO_V_CPU_AHB_CLK 69 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 70 +#define GCC_QUPV3_WRAP1_CORE_2X_CLK 71 +#define GCC_QUPV3_WRAP1_CORE_CLK 72 +#define GCC_QUPV3_WRAP1_QSPI_REF_CLK 73 +#define GCC_QUPV3_WRAP1_QSPI_REF_CLK_SRC 74 +#define GCC_QUPV3_WRAP1_S0_CLK 75 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 76 +#define GCC_QUPV3_WRAP1_S1_CLK 77 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 78 +#define GCC_QUPV3_WRAP1_S2_CLK 79 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 80 +#define GCC_QUPV3_WRAP1_S3_CLK 81 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 82 +#define GCC_QUPV3_WRAP1_S4_CLK 83 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 84 +#define GCC_QUPV3_WRAP1_S5_CLK 85 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 86 +#define GCC_QUPV3_WRAP1_S6_CLK 87 +#define GCC_QUPV3_WRAP1_S6_CLK_SRC 88 +#define GCC_QUPV3_WRAP1_S7_CLK 89 +#define GCC_QUPV3_WRAP1_S7_CLK_SRC 90 +#define GCC_QUPV3_WRAP2_CORE_2X_CLK 91 +#define GCC_QUPV3_WRAP2_CORE_CLK 92 +#define GCC_QUPV3_WRAP2_S0_CLK 93 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 94 +#define GCC_QUPV3_WRAP2_S1_CLK 95 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 96 +#define GCC_QUPV3_WRAP2_S2_CLK 97 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 98 +#define GCC_QUPV3_WRAP2_S3_CLK 99 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 100 +#define GCC_QUPV3_WRAP2_S4_CLK 101 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 102 +#define GCC_QUPV3_WRAP2_S5_CLK 103 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 104 +#define GCC_QUPV3_WRAP2_S6_CLK 105 +#define GCC_QUPV3_WRAP2_S6_CLK_SRC 106 +#define GCC_QUPV3_WRAP2_S7_CLK 107 +#define GCC_QUPV3_WRAP2_S7_CLK_SRC 108 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 109 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 110 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 111 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 112 +#define GCC_SDCC1_AHB_CLK 113 +#define GCC_SDCC1_APPS_CLK 114 +#define GCC_SDCC1_APPS_CLK_SRC 115 +#define GCC_SDCC1_ICE_CORE_CLK 116 +#define GCC_SDCC1_ICE_CORE_CLK_SRC 117 +#define GCC_SDCC2_AHB_CLK 118 +#define GCC_SDCC2_APPS_CLK 119 +#define GCC_SDCC2_APPS_CLK_SRC 120 +#define GCC_UFS_PHY_AHB_CLK 121 +#define GCC_UFS_PHY_AXI_CLK 122 +#define GCC_UFS_PHY_AXI_CLK_SRC 123 +#define GCC_UFS_PHY_ICE_CORE_CLK 124 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 125 +#define GCC_UFS_PHY_PHY_AUX_CLK 126 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 127 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 128 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC 129 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 130 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC 131 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 132 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC 133 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 134 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 135 +#define GCC_USB30_PRIM_ATB_CLK 136 +#define GCC_USB30_PRIM_MASTER_CLK 137 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 138 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 139 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 140 +#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 141 +#define GCC_USB30_PRIM_SLEEP_CLK 142 +#define GCC_USB3_PRIM_PHY_AUX_CLK 143 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 144 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 145 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 146 +#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 147 +#define GCC_VIDEO_AHB_CLK 148 +#define GCC_VIDEO_AXI0_CLK 149 +#define GCC_VIDEO_AXI1_CLK 150 +#define GCC_VIDEO_XO_CLK 151 + +/* GCC power domains */ +#define GCC_PCIE_0_GDSC 0 +#define GCC_PCIE_0_PHY_GDSC 1 +#define GCC_PCIE_1_GDSC 2 +#define GCC_PCIE_1_PHY_GDSC 3 +#define GCC_UFS_MEM_PHY_GDSC 4 +#define GCC_UFS_PHY_GDSC 5 +#define GCC_USB30_PRIM_GDSC 6 +#define GCC_USB3_PHY_GDSC 7 + +/* GCC resets */ +#define GCC_CAMERA_BCR 0 +#define GCC_DISPLAY_BCR 1 +#define GCC_GPU_BCR 2 +#define GCC_PCIE_0_BCR 3 +#define GCC_PCIE_0_LINK_DOWN_BCR 4 +#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 5 +#define GCC_PCIE_0_PHY_BCR 6 +#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 7 +#define GCC_PCIE_1_BCR 8 +#define GCC_PCIE_1_LINK_DOWN_BCR 9 +#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 10 +#define GCC_PCIE_1_PHY_BCR 11 +#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 12 +#define GCC_PCIE_PHY_BCR 13 +#define GCC_PCIE_PHY_CFG_AHB_BCR 14 +#define GCC_PCIE_PHY_COM_BCR 15 +#define GCC_PCIE_RSCC_BCR 16 +#define GCC_PDM_BCR 17 +#define GCC_QUPV3_WRAPPER_1_BCR 18 +#define GCC_QUPV3_WRAPPER_2_BCR 19 +#define GCC_QUSB2PHY_PRIM_BCR 20 +#define GCC_QUSB2PHY_SEC_BCR 21 +#define GCC_SDCC1_BCR 22 +#define GCC_SDCC2_BCR 23 +#define GCC_UFS_PHY_BCR 24 +#define GCC_USB30_PRIM_BCR 25 +#define GCC_USB3_DP_PHY_PRIM_BCR 26 +#define GCC_USB3_DP_PHY_SEC_BCR 27 +#define GCC_USB3_PHY_PRIM_BCR 28 +#define GCC_USB3_PHY_SEC_BCR 29 +#define GCC_USB3PHY_PHY_PRIM_BCR 30 +#define GCC_USB3PHY_PHY_SEC_BCR 31 +#define GCC_VIDEO_AXI0_CLK_ARES 32 +#define GCC_VIDEO_AXI1_CLK_ARES 33 +#define GCC_VIDEO_BCR 34 + +#endif diff --git a/include/dt-bindings/clock/qcom,eliza-tcsr.h b/include/dt-bindings/clock/qcom,eliza-tcsr.h new file mode 100644 index 000000000000..aeb5e2b1a47b --- /dev/null +++ b/include/dt-bindings/clock/qcom,eliza-tcsr.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_TCSR_CC_ELIZA_H +#define _DT_BINDINGS_CLK_QCOM_TCSR_CC_ELIZA_H + +/* TCSR_CC clocks */ +#define TCSR_HDMI_CLKREF_EN 0 +#define TCSR_PCIE_0_CLKREF_EN 1 +#define TCSR_PCIE_1_CLKREF_EN 2 +#define TCSR_UFS_CLKREF_EN 3 +#define TCSR_USB2_CLKREF_EN 4 +#define TCSR_USB3_CLKREF_EN 5 + +#endif diff --git a/include/dt-bindings/clock/qcom,ipq5210-gcc.h b/include/dt-bindings/clock/qcom,ipq5210-gcc.h new file mode 100644 index 000000000000..84116f34ee4d --- /dev/null +++ b/include/dt-bindings/clock/qcom,ipq5210-gcc.h @@ -0,0 +1,126 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_IPQ5210_H +#define _DT_BINDINGS_CLOCK_IPQ_GCC_IPQ5210_H + +#define GCC_ADSS_PWM_CLK 0 +#define GCC_ADSS_PWM_CLK_SRC 1 +#define GCC_CMN_12GPLL_AHB_CLK 2 +#define GCC_CMN_12GPLL_SYS_CLK 3 +#define GCC_CNOC_LPASS_CFG_CLK 4 +#define GCC_CNOC_PCIE0_1LANE_S_CLK 5 +#define GCC_CNOC_PCIE1_2LANE_S_CLK 6 +#define GCC_CNOC_USB_CLK 7 +#define GCC_GEPHY_SYS_CLK 8 +#define GCC_LPASS_AXIM_CLK_SRC 9 +#define GCC_LPASS_CORE_AXIM_CLK 10 +#define GCC_LPASS_SWAY_CLK 11 +#define GCC_LPASS_SWAY_CLK_SRC 12 +#define GCC_MDIO_AHB_CLK 13 +#define GCC_MDIO_GEPHY_AHB_CLK 14 +#define GCC_NSS_TS_CLK 15 +#define GCC_NSS_TS_CLK_SRC 16 +#define GCC_NSSCC_CLK 17 +#define GCC_NSSCFG_CLK 18 +#define GCC_NSSNOC_ATB_CLK 19 +#define GCC_NSSNOC_MEMNOC_1_CLK 20 +#define GCC_NSSNOC_MEMNOC_BFDCD_CLK_SRC 21 +#define GCC_NSSNOC_MEMNOC_CLK 22 +#define GCC_NSSNOC_MEMNOC_DIV_CLK_SRC 23 +#define GCC_NSSNOC_NSSCC_CLK 24 +#define GCC_NSSNOC_PCNOC_1_CLK 25 +#define GCC_NSSNOC_QOSGEN_REF_CLK 26 +#define GCC_NSSNOC_SNOC_1_CLK 27 +#define GCC_NSSNOC_SNOC_CLK 28 +#define GCC_NSSNOC_TIMEOUT_REF_CLK 29 +#define GCC_NSSNOC_XO_DCD_CLK 30 +#define GCC_PCIE0_AHB_CLK 31 +#define GCC_PCIE0_AUX_CLK 32 +#define GCC_PCIE0_AXI_M_CLK 33 +#define GCC_PCIE0_AXI_M_CLK_SRC 34 +#define GCC_PCIE0_AXI_S_BRIDGE_CLK 35 +#define GCC_PCIE0_AXI_S_CLK 36 +#define GCC_PCIE0_AXI_S_CLK_SRC 37 +#define GCC_PCIE0_PIPE_CLK 38 +#define GCC_PCIE0_PIPE_CLK_SRC 39 +#define GCC_PCIE0_RCHNG_CLK 40 +#define GCC_PCIE0_RCHNG_CLK_SRC 41 +#define GCC_PCIE1_AHB_CLK 42 +#define GCC_PCIE1_AUX_CLK 43 +#define GCC_PCIE1_AXI_M_CLK 44 +#define GCC_PCIE1_AXI_M_CLK_SRC 45 +#define GCC_PCIE1_AXI_S_BRIDGE_CLK 46 +#define GCC_PCIE1_AXI_S_CLK 47 +#define GCC_PCIE1_AXI_S_CLK_SRC 48 +#define GCC_PCIE1_PIPE_CLK 49 +#define GCC_PCIE1_PIPE_CLK_SRC 50 +#define GCC_PCIE1_RCHNG_CLK 51 +#define GCC_PCIE1_RCHNG_CLK_SRC 52 +#define GCC_PCIE_AUX_CLK_SRC 53 +#define GCC_PCNOC_BFDCD_CLK_SRC 54 +#define GCC_PON_APB_CLK 55 +#define GCC_PON_TM_CLK 56 +#define GCC_PON_TM2X_CLK 57 +#define GCC_PON_TM2X_CLK_SRC 58 +#define GCC_QDSS_AT_CLK 59 +#define GCC_QDSS_AT_CLK_SRC 60 +#define GCC_QDSS_DAP_CLK 61 +#define GCC_QDSS_TSCTR_CLK_SRC 62 +#define GCC_QPIC_AHB_CLK 63 +#define GCC_QPIC_CLK 64 +#define GCC_QPIC_CLK_SRC 65 +#define GCC_QPIC_IO_MACRO_CLK 66 +#define GCC_QPIC_IO_MACRO_CLK_SRC 67 +#define GCC_QRNG_AHB_CLK 68 +#define GCC_QUPV3_AHB_MST_CLK 69 +#define GCC_QUPV3_AHB_SLV_CLK 70 +#define GCC_QUPV3_WRAP_SE0_CLK 71 +#define GCC_QUPV3_WRAP_SE0_CLK_SRC 72 +#define GCC_QUPV3_WRAP_SE1_CLK 73 +#define GCC_QUPV3_WRAP_SE1_CLK_SRC 74 +#define GCC_QUPV3_WRAP_SE2_CLK 75 +#define GCC_QUPV3_WRAP_SE2_CLK_SRC 76 +#define GCC_QUPV3_WRAP_SE3_CLK 77 +#define GCC_QUPV3_WRAP_SE3_CLK_SRC 78 +#define GCC_QUPV3_WRAP_SE4_CLK 79 +#define GCC_QUPV3_WRAP_SE4_CLK_SRC 80 +#define GCC_QUPV3_WRAP_SE5_CLK 81 +#define GCC_QUPV3_WRAP_SE5_CLK_SRC 82 +#define GCC_SDCC1_AHB_CLK 83 +#define GCC_SDCC1_APPS_CLK 84 +#define GCC_SDCC1_APPS_CLK_SRC 85 +#define GCC_SDCC1_ICE_CORE_CLK 86 +#define GCC_SDCC1_ICE_CORE_CLK_SRC 87 +#define GCC_SLEEP_CLK_SRC 88 +#define GCC_SNOC_LPASS_CLK 89 +#define GCC_SNOC_PCIE0_AXI_M_CLK 90 +#define GCC_SNOC_PCIE1_AXI_M_CLK 91 +#define GCC_SYSTEM_NOC_BFDCD_CLK_SRC 92 +#define GCC_UNIPHY0_AHB_CLK 93 +#define GCC_UNIPHY0_SYS_CLK 94 +#define GCC_UNIPHY1_AHB_CLK 95 +#define GCC_UNIPHY1_SYS_CLK 96 +#define GCC_UNIPHY2_AHB_CLK 97 +#define GCC_UNIPHY2_SYS_CLK 98 +#define GCC_UNIPHY_SYS_CLK_SRC 99 +#define GCC_USB0_AUX_CLK 100 +#define GCC_USB0_AUX_CLK_SRC 101 +#define GCC_USB0_MASTER_CLK 102 +#define GCC_USB0_MASTER_CLK_SRC 103 +#define GCC_USB0_MOCK_UTMI_CLK 104 +#define GCC_USB0_MOCK_UTMI_CLK_SRC 105 +#define GCC_USB0_MOCK_UTMI_DIV_CLK_SRC 106 +#define GCC_USB0_PHY_CFG_AHB_CLK 107 +#define GCC_USB0_PIPE_CLK 108 +#define GCC_USB0_PIPE_CLK_SRC 109 +#define GCC_USB0_SLEEP_CLK 110 +#define GCC_XO_CLK_SRC 111 +#define GPLL0_MAIN 112 +#define GPLL0 113 +#define GPLL2_MAIN 114 +#define GPLL2 115 +#define GPLL4_MAIN 116 +#endif diff --git a/include/dt-bindings/clock/qcom,sm6115-dispcc.h b/include/dt-bindings/clock/qcom,sm6115-dispcc.h index d1a6c45b5029..ab8d312ade37 100644 --- a/include/dt-bindings/clock/qcom,sm6115-dispcc.h +++ b/include/dt-bindings/clock/qcom,sm6115-dispcc.h @@ -6,7 +6,7 @@ #ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H #define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H -/* DISP_CC clocks */ +/* Clocks */ #define DISP_CC_PLL0 0 #define DISP_CC_PLL0_OUT_MAIN 1 #define DISP_CC_MDSS_AHB_CLK 2 @@ -30,7 +30,10 @@ #define DISP_CC_SLEEP_CLK 20 #define DISP_CC_SLEEP_CLK_SRC 21 -/* DISP_CC GDSCR */ +/* Resets */ +#define DISP_CC_MDSS_CORE_BCR 0 + +/* GDSCs */ #define MDSS_GDSC 0 #endif diff --git a/include/dt-bindings/interconnect/qcom,eliza-rpmh.h b/include/dt-bindings/interconnect/qcom,eliza-rpmh.h new file mode 100644 index 000000000000..95db2fe647de --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,eliza-rpmh.h @@ -0,0 +1,136 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_ELIZA_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_ELIZA_H + +#define MASTER_QSPI_0 0 +#define MASTER_QUP_1 1 +#define MASTER_UFS_MEM 2 +#define MASTER_USB3_0 3 +#define SLAVE_A1NOC_SNOC 4 + +#define MASTER_QUP_2 0 +#define MASTER_CRYPTO 1 +#define MASTER_IPA 2 +#define MASTER_SOCCP_AGGR_NOC 3 +#define MASTER_QDSS_ETR 4 +#define MASTER_QDSS_ETR_1 5 +#define MASTER_SDCC_1 6 +#define MASTER_SDCC_2 7 +#define SLAVE_A2NOC_SNOC 8 + +#define MASTER_QUP_CORE_1 0 +#define MASTER_QUP_CORE_2 1 +#define SLAVE_QUP_CORE_1 2 +#define SLAVE_QUP_CORE_2 3 + +#define MASTER_CNOC_CFG 0 +#define SLAVE_AHB2PHY_SOUTH 1 +#define SLAVE_AHB2PHY_NORTH 2 +#define SLAVE_CAMERA_CFG 3 +#define SLAVE_CLK_CTL 4 +#define SLAVE_CRYPTO_0_CFG 5 +#define SLAVE_DISPLAY_CFG 6 +#define SLAVE_GFX3D_CFG 7 +#define SLAVE_I3C_IBI0_CFG 8 +#define SLAVE_I3C_IBI1_CFG 9 +#define SLAVE_IMEM_CFG 10 +#define SLAVE_CNOC_MSS 11 +#define SLAVE_PCIE_0_CFG 12 +#define SLAVE_PRNG 13 +#define SLAVE_QDSS_CFG 14 +#define SLAVE_QSPI_0 15 +#define SLAVE_QUP_1 16 +#define SLAVE_QUP_2 17 +#define SLAVE_SDCC_2 18 +#define SLAVE_TCSR 19 +#define SLAVE_TLMM 20 +#define SLAVE_UFS_MEM_CFG 21 +#define SLAVE_USB3_0 22 +#define SLAVE_VENUS_CFG 23 +#define SLAVE_VSENSE_CTRL_CFG 24 +#define SLAVE_CNOC_MNOC_HF_CFG 25 +#define SLAVE_CNOC_MNOC_SF_CFG 26 +#define SLAVE_PCIE_ANOC_CFG 27 +#define SLAVE_QDSS_STM 28 +#define SLAVE_TCU 29 + +#define MASTER_GEM_NOC_CNOC 0 +#define MASTER_GEM_NOC_PCIE_SNOC 1 +#define SLAVE_AOSS 2 +#define SLAVE_IPA_CFG 3 +#define SLAVE_IPC_ROUTER_CFG 4 +#define SLAVE_SOCCP 5 +#define SLAVE_TME_CFG 6 +#define SLAVE_APPSS 7 +#define SLAVE_CNOC_CFG 8 +#define SLAVE_DDRSS_CFG 9 +#define SLAVE_BOOT_IMEM 10 +#define SLAVE_IMEM 11 +#define SLAVE_BOOT_IMEM_2 12 +#define SLAVE_SERVICE_CNOC 13 +#define SLAVE_PCIE_0 14 +#define SLAVE_PCIE_1 15 + +#define MASTER_GPU_TCU 0 +#define MASTER_SYS_TCU 1 +#define MASTER_APPSS_PROC 2 +#define MASTER_GFX3D 3 +#define MASTER_LPASS_GEM_NOC 4 +#define MASTER_MSS_PROC 5 +#define MASTER_MNOC_HF_MEM_NOC 6 +#define MASTER_MNOC_SF_MEM_NOC 7 +#define MASTER_COMPUTE_NOC 8 +#define MASTER_ANOC_PCIE_GEM_NOC 9 +#define MASTER_SNOC_SF_MEM_NOC 10 +#define MASTER_WLAN_Q6 11 +#define MASTER_GIC 12 +#define SLAVE_GEM_NOC_CNOC 13 +#define SLAVE_LLCC 14 +#define SLAVE_MEM_NOC_PCIE_SNOC 15 + +#define MASTER_LPIAON_NOC 0 +#define SLAVE_LPASS_GEM_NOC 1 + +#define MASTER_LPASS_LPINOC 0 +#define SLAVE_LPIAON_NOC_LPASS_AG_NOC 1 + +#define MASTER_LPASS_PROC 0 +#define SLAVE_LPICX_NOC_LPIAON_NOC 1 + +#define MASTER_LLCC 0 +#define SLAVE_EBI1 1 + +#define MASTER_CAMNOC_NRT_ICP_SF 0 +#define MASTER_CAMNOC_RT_CDM_SF 1 +#define MASTER_CAMNOC_SF 2 +#define MASTER_VIDEO_MVP 3 +#define MASTER_VIDEO_V_PROC 4 +#define MASTER_CNOC_MNOC_SF_CFG 5 +#define MASTER_CAMNOC_HF 6 +#define MASTER_MDP 7 +#define MASTER_CNOC_MNOC_HF_CFG 8 +#define SLAVE_MNOC_SF_MEM_NOC 9 +#define SLAVE_SERVICE_MNOC_SF 10 +#define SLAVE_MNOC_HF_MEM_NOC 11 +#define SLAVE_SERVICE_MNOC_HF 12 + +#define MASTER_CDSP_PROC 0 +#define SLAVE_CDSP_MEM_NOC 1 + +#define MASTER_PCIE_ANOC_CFG 0 +#define MASTER_PCIE_0 1 +#define MASTER_PCIE_1 2 +#define SLAVE_ANOC_PCIE_GEM_NOC 3 +#define SLAVE_SERVICE_PCIE_ANOC 4 + +#define MASTER_A1NOC_SNOC 0 +#define MASTER_A2NOC_SNOC 1 +#define MASTER_CNOC_SNOC 2 +#define MASTER_NSINOC_SNOC 3 +#define SLAVE_SNOC_GEM_NOC_SF 4 + +#endif diff --git a/include/dt-bindings/reset/qcom,ipq5210-gcc.h b/include/dt-bindings/reset/qcom,ipq5210-gcc.h new file mode 100644 index 000000000000..09890a09087c --- /dev/null +++ b/include/dt-bindings/reset/qcom,ipq5210-gcc.h @@ -0,0 +1,127 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef _DT_BINDINGS_RESET_IPQ_GCC_IPQ5210_H +#define _DT_BINDINGS_RESET_IPQ_GCC_IPQ5210_H + +#define GCC_ADSS_BCR 0 +#define GCC_ADSS_PWM_ARES 1 +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 2 +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_GPLL0_ARES 3 +#define GCC_APSS_AHB_ARES 4 +#define GCC_APSS_ATB_ARES 5 +#define GCC_APSS_AXI_ARES 6 +#define GCC_APSS_TS_ARES 7 +#define GCC_BOOT_ROM_AHB_ARES 8 +#define GCC_BOOT_ROM_BCR 9 +#define GCC_GEPHY_BCR 10 +#define GCC_GEPHY_SYS_ARES 11 +#define GCC_GP1_ARES 12 +#define GCC_GP2_ARES 13 +#define GCC_GP3_ARES 14 +#define GCC_MDIO_AHB_ARES 15 +#define GCC_MDIO_BCR 16 +#define GCC_MDIO_GEPHY_AHB_ARES 17 +#define GCC_NSS_BCR 18 +#define GCC_NSS_TS_ARES 19 +#define GCC_NSSCC_ARES 20 +#define GCC_NSSCFG_ARES 21 +#define GCC_NSSNOC_ATB_ARES 22 +#define GCC_NSSNOC_MEMNOC_1_ARES 23 +#define GCC_NSSNOC_MEMNOC_ARES 24 +#define GCC_NSSNOC_NSSCC_ARES 25 +#define GCC_NSSNOC_PCNOC_1_ARES 26 +#define GCC_NSSNOC_QOSGEN_REF_ARES 27 +#define GCC_NSSNOC_SNOC_1_ARES 28 +#define GCC_NSSNOC_SNOC_ARES 29 +#define GCC_NSSNOC_TIMEOUT_REF_ARES 30 +#define GCC_NSSNOC_XO_DCD_ARES 31 +#define GCC_PCIE0_AHB_ARES 32 +#define GCC_PCIE0_AUX_ARES 33 +#define GCC_PCIE0_AXI_M_ARES 34 +#define GCC_PCIE0_AXI_S_BRIDGE_ARES 35 +#define GCC_PCIE0_AXI_S_ARES 36 +#define GCC_PCIE0_BCR 37 +#define GCC_PCIE0_LINK_DOWN_BCR 38 +#define GCC_PCIE0_PHY_BCR 39 +#define GCC_PCIE0_PIPE_ARES 40 +#define GCC_PCIE0PHY_PHY_BCR 41 +#define GCC_PCIE1_AHB_ARES 42 +#define GCC_PCIE1_AUX_ARES 43 +#define GCC_PCIE1_AXI_M_ARES 44 +#define GCC_PCIE1_AXI_S_BRIDGE_ARES 45 +#define GCC_PCIE1_AXI_S_ARES 46 +#define GCC_PCIE1_BCR 47 +#define GCC_PCIE1_LINK_DOWN_BCR 48 +#define GCC_PCIE1_PHY_BCR 49 +#define GCC_PCIE1_PIPE_ARES 50 +#define GCC_PCIE1PHY_PHY_BCR 51 +#define GCC_QRNG_AHB_ARES 52 +#define GCC_QRNG_BCR 53 +#define GCC_QUPV3_2X_CORE_ARES 54 +#define GCC_QUPV3_AHB_MST_ARES 55 +#define GCC_QUPV3_AHB_SLV_ARES 56 +#define GCC_QUPV3_BCR 57 +#define GCC_QUPV3_CORE_ARES 58 +#define GCC_QUPV3_WRAP_SE0_ARES 59 +#define GCC_QUPV3_WRAP_SE0_BCR 60 +#define GCC_QUPV3_WRAP_SE1_ARES 61 +#define GCC_QUPV3_WRAP_SE1_BCR 62 +#define GCC_QUPV3_WRAP_SE2_ARES 63 +#define GCC_QUPV3_WRAP_SE2_BCR 64 +#define GCC_QUPV3_WRAP_SE3_ARES 65 +#define GCC_QUPV3_WRAP_SE3_BCR 66 +#define GCC_QUPV3_WRAP_SE4_ARES 67 +#define GCC_QUPV3_WRAP_SE4_BCR 68 +#define GCC_QUPV3_WRAP_SE5_ARES 69 +#define GCC_QUPV3_WRAP_SE5_BCR 70 +#define GCC_QUSB2_0_PHY_BCR 71 +#define GCC_SDCC1_AHB_ARES 72 +#define GCC_SDCC1_APPS_ARES 73 +#define GCC_SDCC1_ICE_CORE_ARES 74 +#define GCC_SDCC_BCR 75 +#define GCC_TLMM_AHB_ARES 76 +#define GCC_TLMM_ARES 77 +#define GCC_TLMM_BCR 78 +#define GCC_UNIPHY0_AHB_ARES 79 +#define GCC_UNIPHY0_BCR 80 +#define GCC_UNIPHY0_SYS_ARES 81 +#define GCC_UNIPHY1_AHB_ARES 82 +#define GCC_UNIPHY1_BCR 83 +#define GCC_UNIPHY1_SYS_ARES 84 +#define GCC_UNIPHY2_AHB_ARES 85 +#define GCC_UNIPHY2_BCR 86 +#define GCC_UNIPHY2_SYS_ARES 87 +#define GCC_USB0_AUX_ARES 88 +#define GCC_USB0_MASTER_ARES 89 +#define GCC_USB0_MOCK_UTMI_ARES 90 +#define GCC_USB0_PHY_BCR 91 +#define GCC_USB0_PHY_CFG_AHB_ARES 92 +#define GCC_USB0_PIPE_ARES 93 +#define GCC_USB0_SLEEP_ARES 94 +#define GCC_USB3PHY_0_PHY_BCR 95 +#define GCC_USB_BCR 96 +#define GCC_PCIE0_PIPE_RESET 97 +#define GCC_PCIE0_CORE_STICKY_RESET 98 +#define GCC_PCIE0_AXI_S_STICKY_RESET 99 +#define GCC_PCIE0_AXI_S_RESET 100 +#define GCC_PCIE0_AXI_M_STICKY_RESET 101 +#define GCC_PCIE0_AXI_M_RESET 102 +#define GCC_PCIE0_AUX_RESET 103 +#define GCC_PCIE0_AHB_RESET 104 +#define GCC_PCIE1_PIPE_RESET 105 +#define GCC_PCIE1_CORE_STICKY_RESET 106 +#define GCC_PCIE1_AXI_S_STICKY_RESET 107 +#define GCC_PCIE1_AXI_S_RESET 108 +#define GCC_PCIE1_AXI_M_STICKY_RESET 109 +#define GCC_PCIE1_AXI_M_RESET 110 +#define GCC_PCIE1_AUX_RESET 111 +#define GCC_PCIE1_AHB_RESET 112 +#define GCC_UNIPHY0_XPCS_ARES 113 +#define GCC_UNIPHY1_XPCS_ARES 114 +#define GCC_UNIPHY2_XPCS_ARES 115 +#define GCC_QDSS_BCR 116 + +#endif |