Merge tag 'usb-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and new device ids for 6.19-rc6

  Included in here are:

   - new usb-serial device ids

   - dwc3-apple driver fixes to get things working properly on that
     hardware platform

   - ohci/uhci platfrom driver module soft-deps with ehci to remove a
     runtime warning that sometimes shows up on some platforms.

   - quirk for broken devices that can not handle reading the BOS
     descriptor from them without going crazy.

   - usb-serial driver fixes

   - xhci driver fixes

   - usb gadget driver fixes

  All of these except for the last xhci fix has been in linux-next for a
  while. The xhci fix has been reported by others to solve the issue for
  them, so should be ok"

* tag 'usb-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: sideband: don't dereference freed ring when removing sideband endpoint
  usb: gadget: uvc: retry vb2_reqbufs() with vb_vmalloc_memops if use_sg fail
  usb: gadget: uvc: return error from uvcg_queue_init()
  usb: gadget: uvc: fix interval_duration calculation
  usb: gadget: uvc: fix req_payload_size calculation
  usb: dwc3: apple: Ignore USB role switches to the active role
  usb: host: xhci-tegra: Use platform_get_irq_optional() for wake IRQs
  USB: OHCI/UHCI: Add soft dependencies on ehci_platform
  usb: dwc3: apple: Set USB2 PHY mode before dwc3 init
  USB: serial: f81232: fix incomplete serial port generation
  USB: serial: ftdi_sio: add support for PICAXE AXE027 cable
  USB: serial: option: add Telit LE910 MBIM composition
  usb: core: add USB_QUIRK_NO_BOS for devices that hang on BOS descriptor
  dt-bindings: usb: qcom,dwc3: Correct MSM8994 interrupts
  dt-bindings: usb: qcom,dwc3: Correct IPQ5018 interrupts
  tcpm: allow looking for role_sw device in the main node
  usb: dwc3: Check for USB4 IP_NAME

22 files changed, 166 insertions, 67 deletions

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index a792434c59db..a7f58114c02e 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -406,7 +406,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,ipq5018-dwc3
               - qcom,ipq6018-dwc3
               - qcom,ipq8074-dwc3
               - qcom,msm8953-dwc3
@@ -428,6 +427,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8994-dwc3
               - qcom,msm8996-dwc3
               - qcom,qcs404-dwc3
               - qcom,sdm660-dwc3
@@ -451,6 +451,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5018-dwc3
               - qcom,ipq5332-dwc3
     then:
       properties:
@@ -488,7 +489,6 @@ allOf:
             enum:
               - qcom,ipq4019-dwc3
               - qcom,ipq8064-dwc3
-              - qcom,msm8994-dwc3
               - qcom,qcs615-dwc3
               - qcom,qcs8300-dwc3
               - qcom,qdu1000-dwc3
diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
index 8cee7c5582f2..7d784a648b7d 100644
--- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -420,7 +420,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,ipq5018-dwc3
               - qcom,ipq6018-dwc3
               - qcom,ipq8074-dwc3
               - qcom,msm8953-dwc3
@@ -443,6 +442,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8994-dwc3
               - qcom,msm8996-dwc3
               - qcom,qcs404-dwc3
               - qcom,sdm660-dwc3
@@ -467,6 +467,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5018-dwc3
               - qcom,ipq5332-dwc3
     then:
       properties:
@@ -509,7 +510,6 @@ allOf:
               - qcom,ipq4019-dwc3
               - qcom,ipq8064-dwc3
               - qcom,kaanapali-dwc3
-              - qcom,msm8994-dwc3
               - qcom,qcs615-dwc3
               - qcom,qcs8300-dwc3
               - qcom,qdu1000-dwc3
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index baf5bc844b6f..2bb1ceb9d621 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -1040,6 +1040,11 @@ int usb_get_bos_descriptor(struct usb_device *dev)
 	__u8 cap_type;
 	int ret;
 
+	if (dev->quirks & USB_QUIRK_NO_BOS) {
+		dev_dbg(ddev, "skipping BOS descriptor\n");
+		return -ENOMSG;
+	}
+
 	bos = kzalloc(sizeof(*bos), GFP_KERNEL);
 	if (!bos)
 		return -ENOMEM;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 47f589c4104a..c4d85089d19b 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -450,6 +450,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x0c45, 0x7056), .driver_info =
 			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
 
+	/* Elgato 4K X - BOS descriptor fetch hangs at SuperSpeed Plus */
+	{ USB_DEVICE(0x0fd9, 0x009b), .driver_info = USB_QUIRK_NO_BOS },
+
 	/* Sony Xperia XZ1 Compact (lilac) smartphone in fastboot mode */
 	{ USB_DEVICE(0x0fce, 0x0dde), .driver_info = USB_QUIRK_NO_LPM },
 
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index ec8407972b9d..93fd5fdf95cb 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -993,6 +993,8 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
 	dwc->ip = DWC3_GSNPS_ID(reg);
+	if (dwc->ip == DWC4_IP)
+		dwc->ip = DWC32_IP;
 
 	/* This should read as U3 followed by revision number */
 	if (DWC3_IP_IS(DWC3)) {
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index a5fc92c4ffa3..45757169b672 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1265,6 +1265,7 @@ struct dwc3 {
 #define DWC3_IP			0x5533
 #define DWC31_IP		0x3331
 #define DWC32_IP		0x3332
+#define DWC4_IP			0x3430
 
 	u32			revision;
 
diff --git a/drivers/usb/dwc3/dwc3-apple.c b/drivers/usb/dwc3/dwc3-apple.c
index cc47cad232e3..40c3ccfddb67 100644
--- a/drivers/usb/dwc3/dwc3-apple.c
+++ b/drivers/usb/dwc3/dwc3-apple.c
@@ -218,25 +218,31 @@ static int dwc3_apple_core_init(struct dwc3_apple *appledwc)
 	return ret;
 }
 
-static void dwc3_apple_phy_set_mode(struct dwc3_apple *appledwc, enum phy_mode mode)
-{
-	lockdep_assert_held(&appledwc->lock);
-
-	/*
-	 * This platform requires SUSPHY to be enabled here already in order to properly configure
-	 * the PHY and switch dwc3's PIPE interface to USB3 PHY.
-	 */
-	dwc3_enable_susphy(&appledwc->dwc, true);
-	phy_set_mode(appledwc->dwc.usb2_generic_phy[0], mode);
-	phy_set_mode(appledwc->dwc.usb3_generic_phy[0], mode);
-}
-
 static int dwc3_apple_init(struct dwc3_apple *appledwc, enum dwc3_apple_state state)
 {
 	int ret, ret_reset;
 
 	lockdep_assert_held(&appledwc->lock);
 
+	/*
+	 * The USB2 PHY on this platform must be configured for host or device mode while it is
+	 * still powered off and before dwc3 tries to access it. Otherwise, the new configuration
+	 * will sometimes only take affect after the *next* time dwc3 is brought up which causes
+	 * the connected device to just not work.
+	 * The USB3 PHY must be configured later after dwc3 has already been initialized.
+	 */
+	switch (state) {
+	case DWC3_APPLE_HOST:
+		phy_set_mode(appledwc->dwc.usb2_generic_phy[0], PHY_MODE_USB_HOST);
+		break;
+	case DWC3_APPLE_DEVICE:
+		phy_set_mode(appledwc->dwc.usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
+		break;
+	default:
+		/* Unreachable unless there's a bug in this driver */
+		return -EINVAL;
+	}
+
 	ret = reset_control_deassert(appledwc->reset);
 	if (ret) {
 		dev_err(appledwc->dev, "Failed to deassert reset, err=%d\n", ret);
@@ -257,7 +263,13 @@ static int dwc3_apple_init(struct dwc3_apple *appledwc, enum dwc3_apple_state st
 	case DWC3_APPLE_HOST:
 		appledwc->dwc.dr_mode = USB_DR_MODE_HOST;
 		dwc3_apple_set_ptrcap(appledwc, DWC3_GCTL_PRTCAP_HOST);
-		dwc3_apple_phy_set_mode(appledwc, PHY_MODE_USB_HOST);
+		/*
+		 * This platform requires SUSPHY to be enabled here already in order to properly
+		 * configure the PHY and switch dwc3's PIPE interface to USB3 PHY. The USB2 PHY
+		 * has already been configured to the correct mode earlier.
+		 */
+		dwc3_enable_susphy(&appledwc->dwc, true);
+		phy_set_mode(appledwc->dwc.usb3_generic_phy[0], PHY_MODE_USB_HOST);
 		ret = dwc3_host_init(&appledwc->dwc);
 		if (ret) {
 			dev_err(appledwc->dev, "Failed to initialize host, ret=%d\n", ret);
@@ -268,7 +280,13 @@ static int dwc3_apple_init(struct dwc3_apple *appledwc, enum dwc3_apple_state st
 	case DWC3_APPLE_DEVICE:
 		appledwc->dwc.dr_mode = USB_DR_MODE_PERIPHERAL;
 		dwc3_apple_set_ptrcap(appledwc, DWC3_GCTL_PRTCAP_DEVICE);
-		dwc3_apple_phy_set_mode(appledwc, PHY_MODE_USB_DEVICE);
+		/*
+		 * This platform requires SUSPHY to be enabled here already in order to properly
+		 * configure the PHY and switch dwc3's PIPE interface to USB3 PHY. The USB2 PHY
+		 * has already been configured to the correct mode earlier.
+		 */
+		dwc3_enable_susphy(&appledwc->dwc, true);
+		phy_set_mode(appledwc->dwc.usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
 		ret = dwc3_gadget_init(&appledwc->dwc);
 		if (ret) {
 			dev_err(appledwc->dev, "Failed to initialize gadget, ret=%d\n", ret);
@@ -340,6 +358,22 @@ static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, enum usb_role ro
 	guard(mutex)(&appledwc->lock);
 
 	/*
+	 * Skip role switches if appledwc is already in the desired state. The
+	 * USB-C port controller on M2 and M1/M2 Pro/Max/Ultra devices issues
+	 * additional interrupts which results in usb_role_switch_set_role()
+	 * calls with the current role.
+	 * Ignore those calls here to ensure the USB-C port controller and
+	 * appledwc are in a consistent state.
+	 * This matches the behaviour in __dwc3_set_mode().
+	 * Do no handle USB_ROLE_NONE for DWC3_APPLE_NO_CABLE and
+	 * DWC3_APPLE_PROBE_PENDING since that is no-op anyway.
+	 */
+	if (appledwc->state == DWC3_APPLE_HOST && role == USB_ROLE_HOST)
+		return 0;
+	if (appledwc->state == DWC3_APPLE_DEVICE && role == USB_ROLE_DEVICE)
+		return 0;
+
+	/*
 	 * We need to tear all of dwc3 down and re-initialize it every time a cable is
 	 * connected or disconnected or when the mode changes. See the documentation for enum
 	 * dwc3_apple_state for details.
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index aa6ab666741a..a96476507d2f 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -362,6 +362,10 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 			return ret;
 		usb_ep_enable(uvc->video.ep);
 
+		uvc->video.max_req_size = uvc->video.ep->maxpacket
+			* max_t(unsigned int, uvc->video.ep->maxburst, 1)
+			* (uvc->video.ep->mult);
+
 		memset(&v4l2_event, 0, sizeof(v4l2_event));
 		v4l2_event.type = UVC_EVENT_STREAMON;
 		v4l2_event_queue(&uvc->vdev, &v4l2_event);
diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
index 9e79cbe50715..676419a04976 100644
--- a/drivers/usb/gadget/function/uvc.h
+++ b/drivers/usb/gadget/function/uvc.h
@@ -107,7 +107,7 @@ struct uvc_video {
 	unsigned int width;
 	unsigned int height;
 	unsigned int imagesize;
-	unsigned int interval;
+	unsigned int interval;	/* in 100ns units */
 	struct mutex mutex;	/* protects frame parameters */
 
 	unsigned int uvc_num_requests;
@@ -117,6 +117,7 @@ struct uvc_video {
 	/* Requests */
 	bool is_enabled; /* tracks whether video stream is enabled */
 	unsigned int req_size;
+	unsigned int max_req_size;
 	struct list_head ureqs; /* all uvc_requests allocated by uvc_video */
 
 	/* USB requests that the video pump thread can encode into */
diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c
index 9a1bbd79ff5a..586e5524c171 100644
--- a/drivers/usb/gadget/function/uvc_queue.c
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -86,10 +86,17 @@ static int uvc_buffer_prepare(struct vb2_buffer *vb)
 		buf->bytesused = 0;
 	} else {
 		buf->bytesused = vb2_get_plane_payload(vb, 0);
-		buf->req_payload_size =
-			  DIV_ROUND_UP(buf->bytesused +
-				       (video->reqs_per_frame * UVCG_REQUEST_HEADER_LEN),
-				       video->reqs_per_frame);
+
+		if (video->reqs_per_frame != 0)	{
+			buf->req_payload_size =
+				DIV_ROUND_UP(buf->bytesused +
+					(video->reqs_per_frame * UVCG_REQUEST_HEADER_LEN),
+					video->reqs_per_frame);
+			if (buf->req_payload_size > video->req_size)
+				buf->req_payload_size = video->req_size;
+		} else {
+			buf->req_payload_size = video->max_req_size;
+		}
 	}
 
 	return 0;
@@ -175,7 +182,15 @@ int uvcg_alloc_buffers(struct uvc_video_queue *queue,
 {
 	int ret;
 
+retry:
 	ret = vb2_reqbufs(&queue->queue, rb);
+	if (ret < 0 && queue->use_sg) {
+		uvc_trace(UVC_TRACE_IOCTL,
+			  "failed to alloc buffer with sg enabled, try non-sg mode\n");
+		queue->use_sg = 0;
+		queue->queue.mem_ops = &vb2_vmalloc_memops;
+		goto retry;
+	}
 
 	return ret ? ret : rb->count;
 }
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index fb77b0b21790..f568dee08b3b 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -499,13 +499,11 @@ uvc_video_prep_requests(struct uvc_video *video)
 {
 	struct uvc_device *uvc = container_of(video, struct uvc_device, video);
 	struct usb_composite_dev *cdev = uvc->func.config->cdev;
-	unsigned int interval_duration = video->ep->desc->bInterval * 1250;
+	unsigned int interval_duration;
 	unsigned int max_req_size, req_size, header_size;
 	unsigned int nreq;
 
-	max_req_size = video->ep->maxpacket
-		 * max_t(unsigned int, video->ep->maxburst, 1)
-		 * (video->ep->mult);
+	max_req_size = video->max_req_size;
 
 	if (!usb_endpoint_xfer_isoc(video->ep->desc)) {
 		video->req_size = max_req_size;
@@ -515,8 +513,11 @@ uvc_video_prep_requests(struct uvc_video *video)
 		return;
 	}
 
+	interval_duration = 2 << (video->ep->desc->bInterval - 1);
 	if (cdev->gadget->speed < USB_SPEED_HIGH)
-		interval_duration = video->ep->desc->bInterval * 10000;
+		interval_duration *= 10000;
+	else
+		interval_duration *= 1250;
 
 	nreq = DIV_ROUND_UP(video->interval, interval_duration);
 
@@ -837,7 +838,6 @@ int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc)
 	video->interval = 666666;
 
 	/* Initialize the video buffers queue. */
-	uvcg_queue_init(&video->queue, uvc->v4l2_dev.dev->parent,
+	return uvcg_queue_init(&video->queue, uvc->v4l2_dev.dev->parent,
 			V4L2_BUF_TYPE_VIDEO_OUTPUT, &video->mutex);
-	return 0;
 }
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 2e4bb5cc2165..c801527d5bd2 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -392,3 +392,4 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Hauke Mehrtens");
 MODULE_AUTHOR("Alan Stern");
 MODULE_LICENSE("GPL");
+MODULE_SOFTDEP("pre: ehci_platform");
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 5e02f2ceafb6..f4419d4526c4 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -211,3 +211,4 @@ static struct platform_driver uhci_platform_driver = {
 		.of_match_table = platform_uhci_ids,
 	},
 };
+MODULE_SOFTDEP("pre: ehci_platform");
diff --git a/drivers/usb/host/xhci-sideband.c b/drivers/usb/host/xhci-sideband.c
index a85f62a73313..2bd77255032b 100644
--- a/drivers/usb/host/xhci-sideband.c
+++ b/drivers/usb/host/xhci-sideband.c
@@ -210,7 +210,6 @@ xhci_sideband_remove_endpoint(struct xhci_sideband *sb,
 		return -ENODEV;
 
 	__xhci_sideband_remove_endpoint(sb, ep);
-	xhci_initialize_ring_info(ep->ring);
 
 	return 0;
 }
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 31ccced5125e..8b492871d21d 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1563,7 +1563,7 @@ static int tegra_xusb_setup_wakeup(struct platform_device *pdev, struct tegra_xu
 	for (i = 0; i < tegra->soc->max_num_wakes; i++) {
 		struct irq_data *data;
 
-		tegra->wake_irqs[i] = platform_get_irq(pdev, i + WAKE_IRQ_START_INDEX);
+		tegra->wake_irqs[i] = platform_get_irq_optional(pdev, i + WAKE_IRQ_START_INDEX);
 		if (tegra->wake_irqs[i] < 0)
 			break;
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 02c9bfe21ae2..b3ba16b9718c 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2898,16 +2898,25 @@ int xhci_stop_endpoint_sync(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, int
 			    gfp_t gfp_flags)
 {
 	struct xhci_command *command;
+	struct xhci_ep_ctx *ep_ctx;
 	unsigned long flags;
-	int ret;
+	int ret = -ENODEV;
 
 	command = xhci_alloc_command(xhci, true, gfp_flags);
 	if (!command)
 		return -ENOMEM;
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	ret = xhci_queue_stop_endpoint(xhci, command, ep->vdev->slot_id,
-				       ep->ep_index, suspend);
+
+	/* make sure endpoint exists and is running before stopping it */
+	if (ep->ring) {
+		ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
+		if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_RUNNING)
+			ret = xhci_queue_stop_endpoint(xhci, command,
+						       ep->vdev->slot_id,
+						       ep->ep_index, suspend);
+	}
+
 	if (ret < 0) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		goto out;
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 530b77fc2f78..9262a2ac97f5 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -70,7 +70,6 @@ MODULE_DEVICE_TABLE(usb, combined_id_table);
 #define F81232_REGISTER_REQUEST		0xa0
 #define F81232_GET_REGISTER		0xc0
 #define F81232_SET_REGISTER		0x40
-#define F81534A_ACCESS_REG_RETRY	2
 
 #define SERIAL_BASE_ADDRESS		0x0120
 #define RECEIVE_BUFFER_REGISTER		(0x00 + SERIAL_BASE_ADDRESS)
@@ -824,36 +823,31 @@ static void f81232_lsr_worker(struct work_struct *work)
 static int f81534a_ctrl_set_register(struct usb_interface *intf, u16 reg,
 					u16 size, void *val)
 {
-	struct usb_device *dev = interface_to_usbdev(intf);
-	int retry = F81534A_ACCESS_REG_RETRY;
-	int status;
-
-	while (retry--) {
-		status = usb_control_msg_send(dev,
-					      0,
-					      F81232_REGISTER_REQUEST,
-					      F81232_SET_REGISTER,
-					      reg,
-					      0,
-					      val,
-					      size,
-					      USB_CTRL_SET_TIMEOUT,
-					      GFP_KERNEL);
-		if (status) {
-			status = usb_translate_errors(status);
-			if (status == -EIO)
-				continue;
-		}
-
-		break;
-	}
-
-	if (status) {
-		dev_err(&intf->dev, "failed to set register 0x%x: %d\n",
-				reg, status);
-	}
+	return usb_control_msg_send(interface_to_usbdev(intf),
+						0,
+						F81232_REGISTER_REQUEST,
+						F81232_SET_REGISTER,
+						reg,
+						0,
+						val,
+						size,
+						USB_CTRL_SET_TIMEOUT,
+						GFP_KERNEL);
+}
 
-	return status;
+static int f81534a_ctrl_get_register(struct usb_interface *intf, u16 reg,
+					u16 size, void *val)
+{
+	return usb_control_msg_recv(interface_to_usbdev(intf),
+						0,
+						F81232_REGISTER_REQUEST,
+						F81232_GET_REGISTER,
+						reg,
+						0,
+						val,
+						size,
+						USB_CTRL_GET_TIMEOUT,
+						GFP_KERNEL);
 }
 
 static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf, bool en)
@@ -869,6 +863,29 @@ static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf, bool en)
 	 * bit 0~11	: Serial port enable bit.
 	 */
 	if (en) {
+		/*
+		 * The Fintek F81532A/534A/535/536 family relies on the
+		 * F81534A_CTRL_CMD_ENABLE_PORT (116h) register during
+		 * initialization to both determine serial port status and
+		 * control port creation.
+		 *
+		 * If the driver experiences fast load/unload cycles, the
+		 * device state may becomes unstable, resulting in the
+		 * incomplete generation of serial ports.
+		 *
+		 * Performing a dummy read operation on the register prior
+		 * to the initial write command resolves the issue.
+		 *
+		 * This clears the device's stale internal state. Subsequent
+		 * write operations will correctly generate all serial ports.
+		 */
+		status = f81534a_ctrl_get_register(intf,
+						F81534A_CTRL_CMD_ENABLE_PORT,
+						sizeof(enable),
+						enable);
+		if (status)
+			return status;
+
 		enable[0] = 0xff;
 		enable[1] = 0x8f;
 	}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index fe2f21d85737..acb48b1c83f7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -848,6 +848,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID, 1) },
+	{ USB_DEVICE(FTDI_VID, FTDI_AXE027_PID) },
 	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_TURTELIZER_PID, 1) },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 2539b9e2f712..6c76cfebfd0e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -96,6 +96,8 @@
 #define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
 #define LMI_LM3S_ICDI_BOARD_PID		0xbcda
 
+#define FTDI_AXE027_PID		0xBD90 /* PICAXE AXE027 USB download cable */
+
 #define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
 
 /* OpenDCC (www.opendcc.de) product id */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 4c0e5a3ab557..9f2cc5fb9f45 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1505,6 +1505,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1231, 0xff),	/* Telit LE910Cx (RNDIS) */
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x1250, 0xff, 0x00, 0x00) },	/* Telit LE910Cx (rmnet) */
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1252, 0xff) },	/* Telit LE910Cx (MBIM) */
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1260),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1261),
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 4ca2746ce16b..be49a976428f 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -7890,7 +7890,7 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc)
 	port->partner_desc.identity = &port->partner_ident;
 
 	port->role_sw = fwnode_usb_role_switch_get(tcpc->fwnode);
-	if (!port->role_sw)
+	if (IS_ERR_OR_NULL(port->role_sw))
 		port->role_sw = usb_role_switch_get(port->dev);
 	if (IS_ERR(port->role_sw)) {
 		err = PTR_ERR(port->role_sw);
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 59409c1fc3de..2f7bd2fdc616 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -75,4 +75,7 @@
 /* short SET_ADDRESS request timeout */
 #define USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT	BIT(16)
 
+/* skip BOS descriptor request */
+#define USB_QUIRK_NO_BOS			BIT(17)
+
 #endif /* __LINUX_USB_QUIRKS_H */