arm64: dts: qcom: lemans-evk: Enable secondary USB controller in host mode

Enable secondary USB controller in host mode on lemans EVK Platform.

Secondary USB controller is connected to a Genesys Logic USB HUB GL3590
having 4 ports. The ports of hub that are present on lemans EVK standalone
board are used as follows:-
1) port-1 is connected to HD3SS3220 Type-C port controller.
2) port-4 is used for the M.2 E key on corekit. Standard core kit uses UART
for Bluetooth. This port is to be used only if user optionally replaces the
WiFi card with the NFA765 chip which uses USB for Bluetooth.

Remaining 2 ports will become functional when the interface plus mezzanine
board is stacked on top of corekit:

3) port-2 is connected to another hub which is present on the mezz through
which 4 type-A ports are connected.
4) port-3 is used for the M.2 B key for a 5G card when the mezz is
connected.

Secondary USB Controller
          ↓
GL3590 USB Hub (4 ports)
    |
    |-- Port 1 → HD3SS3220 Type‑C Port Controller → USB‑C Connector
    |
    |-- Port 2 → Mezzanine USB Hub (when mezz attached)
    |
    |-- Port 3 → M.2 B‑Key Slot (when mezz attached)
    |
    |-- Port 4 → M.2 E‑Key Slot
                         (Default: BT via UART;
                          USB only if NFA765 module is installed)

Mark the second USB controller as host only capable and add the HD3SS3220
Type-C port controller along with Type-C connector for controlling vbus
supply.

Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406110113.1709886-3-swati.agarwal@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

1 files changed, 168 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index c8c54ad01223..0b01be78a737 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -69,6 +69,37 @@
 		};
 	};
 
+	connector-1 {
+		compatible = "usb-c-connector";
+		label = "USB1-Type-C";
+		data-role = "host";
+		power-role = "source";
+
+		vbus-supply = <&usb1_vbus>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				usb1_con_hs_ep: endpoint {
+					remote-endpoint = <&usb_hub_2_1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				usb1_con_ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_1_in_ep>;
+				};
+
+			};
+		};
+	};
+
 	connector-2 {
 		compatible = "gpio-usb-b-connector", "usb-b-connector";
 		label = "micro-USB";
@@ -161,6 +192,15 @@
 		enable-active-high;
 	};
 
+	usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		gpio = <&expander1 3 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
 	usb2_vbus: regulator-usb2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb2_vbus";
@@ -565,6 +605,39 @@
 			};
 		};
 	};
+
+	usb-typec@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+
+		interrupts-extended = <&pmm8654au_2_gpios 6 IRQ_TYPE_EDGE_FALLING>;
+
+		id-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb1_id>, <&usb1_intr>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_1_in_ep: endpoint {
+					remote-endpoint = <&usb1_con_ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_1_out_ep: endpoint {
+					remote-endpoint = <&usb_hub_3_1>;
+				};
+			};
+		};
+	};
 };
 
 &i2c18 {
@@ -756,6 +829,14 @@
 		power-source = <0>;
 	};
 
+	usb1_intr: usb1-intr-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+	};
+
 	usb2_id: usb2-id-state {
 		pins = "gpio11";
 		function = "normal";
@@ -956,6 +1037,12 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	usb1_id: usb1-id-state {
+		pins = "gpio51";
+		function = "gpio";
+		bias-pull-up;
+	};
 };
 
 &uart0 {
@@ -1014,6 +1101,87 @@
 	status = "okay";
 };
 
+&usb_1 {
+	dr_mode = "host";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	usb_hub_2_x: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+
+		peer-hub = <&usb_hub_3_x>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_2_1: endpoint {
+					remote-endpoint = <&usb1_con_hs_ep>;
+				};
+			};
+
+			/*
+			 * Port-4 is connected to M.2 E key connector on corekit.
+			 */
+			port@4 {
+				reg = <4>;
+
+				usb_hub_2_4: endpoint {
+				};
+			};
+		};
+	};
+
+	usb_hub_3_x: hub@2 {
+		compatible = "usb5e3,625";
+		reg = <2>;
+
+		peer-hub = <&usb_hub_2_x>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_3_1: endpoint {
+					remote-endpoint = <&hd3ss3220_1_out_ep>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+
+				usb_hub_3_4: endpoint {
+				};
+			};
+		};
+	};
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
 &usb_2 {
 	status = "okay";
 };