| Age | Commit message (Collapse) | Author |
|---|
|
info->var, a framebuffer's current mode, is expected to have a matching
entry in info->modelist. var_to_display() relies on this and treats a
failed fb_match_mode() as "This should not happen". fb_set_var() keeps it
true by adding the mode to the list on every change, and
do_register_framebuffer() does the same at registration.
store_modes() replaces the modelist from userspace. fb_new_modelist()
validates the new modes but does not check that info->var still has a
match. It relies on fbcon_new_modelist() to re-point consoles, but that
only handles consoles mapped to the framebuffer. With fbcon unbound there
are none, so info->var is left describing a mode that is no longer in the
list.
A later console takeover runs var_to_display(), where fb_match_mode()
returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it
to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode.
Keep the current mode in the list in fb_new_modelist(), the same way
fb_set_var() does.
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
fbcon_new_modelist() runs when a framebuffer's modelist changes. For each
console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and
passes the vc_num to fbcon_set_disp(). This assumes a console with a mode
set has a vc_data, but it can be NULL. fbcon_set_disp() sets
fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the
mode set after the vc_data is freed. fbcon_new_modelist() then dereferences
the NULL vc_data.
Keep fb_display[i].mode set only while the console has a vc_data. Check
vc_data before setting the mode in fbcon_set_disp(), and clear the mode in
fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips
such consoles.
Reported-by: syzbot+42525d636f430fd5d983@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42525d636f430fd5d983
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
store_modes() replaces a framebuffer's modelist with modes from userspace.
On success it frees the old modelist with fb_destroy_modelist(). Two
fields still point into that freed list.
One pointer is fb_display[i].mode, the mode a console is using.
fbcon_new_modelist() moves these pointers to the new list. It only does so
for consoles still mapped to the framebuffer. An unmapped console is
skipped and keeps its stale pointer. Unbinding fbcon, for example, sets
con2fb_map[i] to -1 but leaves fb_display[i].mode set. An
FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches
fbcon_mode_deleted(). That function reads the stale fb_display[i].mode
through fb_mode_is_equal(). The read is a use-after-free.
The other pointer is fb_info->mode, the current mode. It is set through
the mode sysfs attribute. store_modes() does not update fb_info->mode, so
it is left pointing into the freed list. show_mode(), the attribute's read
handler, dereferences the stale fb_info->mode through mode_string(). The
read is a use-after-free.
Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon:
Set fb_display[i]->mode to NULL when the mode is released") added the
helper fbcon_delete_modelist(). It clears every fb_display[i].mode that
points into a given list. So far it is called only from the unregister
path. Call it from store_modes() too, and set fb_info->mode to NULL.
Reported-by: syzbot+81c7c6b52649fd07299d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=81c7c6b52649fd07299d
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ajjoDhAi2y4ArSlz@dev/
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When fbcon_do_set_font() fails (e.g., due to a memory allocation failure
inside vc_resize() under heavy memory pressure), it jumps to the `err_out`
label to roll back the console state. However, the current rollback logic
forgets to restore the `hi_font` state, leading to a severe state machine
corruption.
Earlier in the function, `set_vc_hi_font()` might be called to change
`vc->vc_hi_font_mask` and mutate the screen buffer. If `vc_resize()`
subsequently fails, the `err_out` path restores `vc_font.charcount`
but entirely skips rolling back the `vc_hi_font_mask` and the screen
buffer.
This mismatch leaves the terminal in a desynchronized state. Because
`vc_hi_font_mask` remains set, the VT subsystem will still accept
character indices greater than 255 from userspace and write them to the
screen buffer. Subsequent rendering calls (e.g., `fbcon_putcs()`) will
then use these inflated indices to access the reverted, 256-character
font array, leading to a deterministic out-of-bounds read and potential
kernel memory disclosure.
Fix this by adding the missing rollback logic for the `hi_font` mask
and screen buffer in the error path.
Fixes: a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed")
Cc: stable@vger.kernel.org
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The 1920x1080@60 modedb entry has one too many initializers before
its sync field: a stray "0" occupies the sync slot, which shifts the
remaining values by one field. The entry therefore decodes as
sync = 0, vmode = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT (0x3,
i.e. FB_VMODE_INTERLACED | FB_VMODE_DOUBLE), and flag =
FB_VMODE_NONINTERLACED, instead of the intended sync = positive H/V,
vmode = non-interlaced.
fb_find_mode() then returns a 1920x1080 mode flagged as interlaced +
doublescan with active-low syncs. Drivers that honour var->vmode and
var->sync when programming display timing enable doublescan and the
wrong sync polarity, corrupting the output.
Drop the stray initializer so sync and vmode hold their intended
values (positive H/V sync, non-interlaced), matching the adjacent
1920x1200 entry.
Fixes: c8902258b2b8 ("fbdev: modedb: Add 1920x1080 at 60 Hz video mode")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If mode_option is NULL, it is assigned from mode_option_buf:
if (!mode_option) {
fb_get_options(NULL, &mode_option_buf);
mode_option = mode_option_buf;
}
Later, name is assigned from mode_option:
const char *name = mode_option;
However, mode_option_buf is freed before name is no longer used:
kfree(mode_option_buf);
while name is still accessed by:
if ((name_matches(db[i], name, namelen) ||
Since name aliases mode_option_buf, this may result in a
use-after-free.
Fix this by extending the lifetime of mode_option_buf until the end of the
function by using scope-based resource management for cleanup.
Signed-off-by: Tuo Li <islituo@gmail.com>
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
A comment in drivers/video/fbdev/core/fbcon.c incorrectly refers to
CONFIG_MISC_TILEBLITTING instead of CONFIG_FB_TILEBLITTING. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There are no callers of fbcon outside fbdev. Move the declarations
into the internal header.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Handle console remapping in fbcon in fb_switch_output(). Vga-switcheroo
invokes this functionality before switching physical outputs to a new
graphics device. Open-coding fbcon state in vga-switcheroo exposed fbdev
implementation details.
Vga-switcheroo is used for switching physical outputs among graphics
hardware. This functionality is only supported by DRM drivers. A later
update will further move fb_switch_output() into DRM's fbdev emulation;
thus fully decoupling vga-switcheroo from fbdev.
v3:
- remove Kconfig dependency related to fbcon (Geert)
v2:
- use '#if defined' (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Handle fbcon during blanking in fb_blank_from_user(). First blank the
hardware, then blank fbcon. Same for unblanking. Update all callers and
resolve the duplicated logic.
With the new helper, fbdev's sysfb code no longer maintains fbcon state
by itself.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Handle fbcon during display updates in fb_set_var_from_user(). Check
with fbcon if the mode change is possible, update hardware state and
finally update fbcon. Update all callers.
Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other
mode-changes callers in sysfs and driver code are missing fbcon-related
steps.
With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain
fbcon state themselves.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Don't need to do suspend/resume for fbcon in graphic mode.
Doing this may cause error, eg:
At the beginning, starting the Xorg with single screen and then an
external screen was plugged in. After logging out in Xorg, fbdev
info may using screen which is connected later on for info always
using first connected connector in list in func 'drm_setup_crtcs_fb'.
Then, S3 executed, fbcon found that the information did not match
and do atomic to switch fb. However, Xorg will not re-bind the crtc
fb but continues doing ioctl. At this time, the fb is incorrect.
With some modifications by Helge Deller.
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The return value of vc_resize() is int, but fbcon_set_disp() stores it
in an unsigned long variable. While the !ret check happens to work
correctly by coincidence (negative values become large positive values),
the types should match. Use int instead.
Eliminates the following W=3 warning:
drivers/video/fbdev/core/fbcon.c: In function 'fbcon_set_disp':
drivers/video/fbdev/core/fbcon.c:1494:14: warning: implicit conversion from 'int' to 'unsigned long' [-Wconversion]
Fixes: af0db3c1f898 ("fbdev: Fix vmalloc out-of-bounds write in fast_imageblit")
Cc: stable@vger.kernel.org # v6.17+
Signed-off-by: Jiacheng Yu <yujiacheng3@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Remove duplicate inclusion of linux/module.h in fb_defio.c to clean up
redundant code.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Move all temporary state of the font-rotation code into the struct
rotated in struct fbcon_par. Protect it with the Kconfig symbol
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION. Avoids mixing it up with fbcon's
regular state.
v2:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fbcon creates a cursor shape on the fly from the user-configured
settings. The logic to create a glyph with the cursor's bitmap mask
is duplicated in four places. In the cases that involve console
rotation, the implementation further rotates the cursor glyph for
displaying.
Consolidate all cursor-mask creation in a single helper. Update the
callers accordingly. For console rotation, use the glyph helpers to
rotate the created cursor glyph to the correct orientation.
v2:
- fix sparse truncated-bits warning
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Move the core of fbcon's font-rotation code to the font library as
the new helper font_data_rotate(). The code can rotate in steps of
90°. For completeness, it also copies the glyph data for multiples
of 360°.
Bring back the memset optimization. A memset to 0 again clears the
whole glyph output buffer. Then use the internal rotation helpers on
the cleared output. Fbcon's original implementation worked like this,
but lost it during refactoring.
Replace fbcon's font-rotation code with the new implementations.
All that's left to do for fbcon is to maintain its internal fbcon
state.
v2:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Move the glyph rotation helpers from fbcon to the font library. Wrap them
behind clean interfaces. Also clear the output memory to zero. Previously,
the implementation relied on the caller to do that.
Go through the fbcon code and callers of the glyph-rotation helpers. In
addition to the font rotation, there's also the cursor code, which uses
the rotation helpers.
The font-rotation relied on a single memset to zero for the whole font.
This is now multiple memsets on each glyph. This will be sorted out when
the font library also implements font rotation.
Building glyph rotation in the font library still depends on
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y. If we get more users of the code,
we can still add a dedicated Kconfig symbol to the font library.
No changes have been made to the actual implementation of the rotate_*()
and pattern_*() functions. These will be refactored as separate changes.
v2:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Implement pitch and size calculation for a single font glyph in the
new helpers font_glyph_pitch() and font_glyph_size(). Replace the
instances where the calculations are open-coded.
Note that in the case of fbcon console rotation, the parameters for
a glyph's width and height might be reversed. This is intentional.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Clear the font buffer if the reallocation during console rotation fails
in fbcon_rotate_font(). The putcs implementations for the rotated buffer
will return early in this case. See [1] for an example.
Currently, fbcon_rotate_font() keeps the old buffer, which is too small
for the rotated font. Printing to the rotated console with a high-enough
character code will overflow the font buffer.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6cc50e1c5b57 ("[PATCH] fbcon: Console Rotation - Add support to rotate font bitmap")
Cc: stable@vger.kernel.org # v2.6.15+
Link: https://elixir.bootlin.com/linux/v6.19/source/drivers/video/fbdev/core/fbcon_ccw.c#L144 # [1]
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add font_data_export() and update consoles to use it.
The helper font_data_export() is based on code in fbcon_get_font().
It extends the size of a single glyph to match the requested vpitch,
which us usually 32 bytes for fonts from user space. Internal fonts
have a pitch according to the glyph's height.
The implementation of font_data_export() differs in several ways from
the original code. The original implementation distinguished between
different pitches of the font data. This is not necessary as the pitch
is a parameter in the copying.
There was also special handling for a font pitch of 3 bytes, which got
expanded to 4 bytes (with trailing bits on each scanline). The logic
originated from long before git history exists even in the historical
tree. So it is not clear why this was implemented. It is not what user
space expects. The setfont utitlity loads font with 3-bytes pitches and
expects to read such fonts with a 3-byte pitch. For any font width, the
font pitch is always the width extended to the next multiple of 8. See
[1] for the user-space font-reading code.
With the changes to handling the font pitches, font_data_export() replaces
the original code's various special cases with a single copying logic.
v3:
- fix typos (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://github.com/legionus/kbd/blob/v2.9.0/src/libkfont/kdfontop.c#L73 # [1]
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add font_data_import() and update consoles to use it.
The implementation of font_data_import() is based on code from fbcon,
which supports overflow checks and crc32 checksums. Fbcon uses the crc32
checksum.
Newport_con now implements the same overflow checks as fbcon. As before,
this console does not support checksums, which are optional. Newport_con
can now also handle input font data with a vertical pitch other than 32
bytes. (The vertical pitch is the offset between two glyphs in the font
data.)
As an internal change, remove the const qualifier from the data field
if struct font_data. This allows font_data_import() to write the data
without type casting. For all users of the font data via font_data_t,
the stored data is still read only.
v3:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add font_data_is_equal() and update consoles to use it.
Font data is equal if it has the same size and contains the same values
on all bytes. Only fbcon uses a crc32 checksum. If set in both operands
the checksums have to be equal.
The new helper also guarantees to not compare internal fonts against
fonts from user space. Internal fonts cannot be ref-counted, so making
them equal to user-space fonts with the same byte sequence results in
undefined behavior.
The test only compares data buffers. Their interpretation is up each
console. Therefore remove a width test in fbcon_set_font().
v3:
- rebase onto font_data_{get,put}()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add font_data_get() and font_data_put(). Update consoles to use them
over REFCOUNT() and plain kfree().
Newly allocated font data starts with a reference count of 1. Loading
the font puts the previously loaded font. If the reference count reaches
zero, font_data_put() frees the font data.
The kernel stores a refcount of zero for internal font data. Invoking
font_data_get() and font_data_put() tests this internally and returns
success without further operation. From the caller's perspective,
getting and putting works the same for all font data.
Fbcon used the userfont flag distinguish between internal fonts and
fonts loaded by user space. Only the latter where refcounted. With the
new helper's automatic handling of internal font data, remove the
userfont flag from fbcon.
Newport_con uses a default font, FONT_DATA, until user space loads
custom font data. Remove all special cases for FONT_DATA, as the get
and put calls' read-only handling also covers this case.
v3:
- fix module linker error wrt font symbols (Nathan, Arnd)
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add font_data_size() and update consoles to use it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Store font data as pointer to font_data_t instead of unsigned char.
Update consoles.
Pointers to font data refer to the raw data. There is a hidden header
before the data that contains additional state. Document the existing
layout and semantics of font_data_t.
The data field in struct vc_font can be used by any console. Therefore
it still points to plain data without the additional header. Fbcon sets
its value from struct fbcon_display.fontdata. Hence, update the size
test in fbcon_resize() to use struct fbcon_display.fontdata instead of
struct vc_font.data.
v3:
- fix typos (Helge)
v2:
- 'Font lookup' -> 'Font description' in <linux/font.h>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
In fbcon, fbcon_resize() computes the size of the font buffer from the
values stored in vc_font. Move these calculations to the dedicated helpers
vc_font_pitch() and vc_font_size().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Replace struct console_font with struct vc_font for the type of the
vc_font field of struct vc_data. Struct console_font is UAPI, which
prevents further changes. Hence a new data type is required.
Struct console_font has a documented vertical pitch of 32 bytes. This
is not the case after the font data has been loaded into the kernel.
Changing the type of vc_font addresses this inconsistency.
The font data is now declared as constant, as it might come from the
kernel's read-only section. There's some fallout throughout the console
code where non-const variables refer to it. Fix them. A later update
will declare the font data to a dedicated data type.
v3:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fbdev's padding helpers do not modify the source buffer. Declare the
parameter as 'const'.
Fbcon's font-rendering code calls these helpers with the font data.
Declaring src as const will allow for making the font data constant
as well.
While at it, also remove the extern qualifier from the function
declarations in the header file.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The pageref array stores all pageref structures for a device's defio
helpers. Move it into struct fb_deferred_io_state to not expose it to
drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Move variable fields from struct fb_deferred_io into struct
fb_deferred_io_state. These fields are internal to the defio code
and should not be exposed to drivers. At some later point, struct
fb_defered_io might become const in all defio code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Acquire a module reference on each mmap and VMA open; hold it until
the kernel closes the VMA. Protects against unloading the module
while user space still has a mapping of the graphics memory. The
VMA page-fault handling would then call into undefined code.
This situation can happen if the underlying device has been unplugged
and the driver has been unloaded. It would then be possible to trigger
the bug by unloading the fbdev core module.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 60b59beafba8 ("fbdev: mm: Deferred IO support")
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v2.6.22+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The field inverse in struct fbcon_display is unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
do_con_write(), fbcon_redraw.*() invoke console_conditional_schedule()
which is a conditional scheduling point based on printk's internal
variables console_may_schedule. It may only be used if the console lock
is acquired for instance via console_lock() or console_trylock().
Prinkt sets the internal variable to 1 (and allows to schedule)
if the console lock has been acquired via console_lock(). The trylock
does not allow it.
The console_conditional_schedule() invocation in do_con_write() is
invoked shortly before console_unlock().
The console_conditional_schedule() invocation in fbcon_redraw.*()
original from fbcon_scroll() / vt's con_scroll() which originate from a
line feed.
In console_unlock() the variable is set to 0 (forbids to schedule) and
it tries to schedule while making progress printing. This is brand new
compared to when console_conditional_schedule() was added in v2.4.9.11.
In v2.6.38-rc3, console_unlock() (started its existence) iterated over
all consoles and flushed them with disabled interrupts. A scheduling
attempt here was not possible, it relied that a long print scheduled
before console_unlock().
Since commit 8d91f8b15361d ("printk: do cond_resched() between lines
while outputting to consoles"), which appeared in v4.5-rc1,
console_unlock() attempts to schedule if it was allowed to schedule
while during console_lock(). Each record is idealy one line so after
every line feed.
This console_conditional_schedule() is also only relevant on
PREEMPT_NONE and PREEMPT_VOLUNTARY builds. In other configurations
cond_resched() becomes a nop and has no impact.
I'm bringing this all up just proof that it is not required anymore. It
becomes a problem on a PREEMPT_RT build with debug code enabled because
that might_sleep() in cond_resched() remains and triggers a warnings.
This is due to
legacy_kthread_func-> console_flush_one_record -> vt_console_print-> lf
-> con_scroll -> fbcon_scroll
and vt_console_print() acquires a spinlock_t which does not allow a
voluntary schedule. There is no need to fb_scroll() to schedule since
console_flush_one_record() attempts to schedule after each line.
!PREEMPT_RT is not affected because the legacy printing thread is only
enabled on PREEMPT_RT builds.
Therefore I suggest to remove console_conditional_schedule().
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Fixes: 5f53ca3ff83b4 ("printk: Implement legacy printer kthread for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com> # from printk() POV
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
mask is u8, so it should use 0xff instead of 0xfff
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If fbcon_open() fails when called from con2fb_acquire_newinfo() then
info->fbcon_par pointer remains NULL which is later dereferenced.
Add check for return value of the function con2fb_acquire_newinfo() to
avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d1baa4ffa677 ("fbcon: set_con2fb_map fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The fbdev sysfs attributes are registered after sending the uevent for
the device creation, leaving a race window where e.g. udev rules may
not be able to access the sysfs attributes because the registration is
not done yet.
Fix this by switching to device_create_with_groups(). This also results in
a nice cleanup. After switching to device_create_with_groups() all that
is left of fb_init_device() is setting the drvdata and that can be passed
to device_create[_with_groups]() too. After which fb_init_device() can
be completely removed.
Dropping fb_init_device() + fb_cleanup_device() in turn allows removing
fb_info.class_flag as they were the only user of this field.
Fixes: 5fc830d6aca1 ("fbdev: Register sysfs groups through device_add_group")
Cc: stable@vger.kernel.org
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.19:
UAPI Changes:
- panfrost: Add PANFROST_BO_SYNC ioctl
- panthor: Add PANTHOR_BO_SYNC ioctl
Core Changes:
- atomic: Add drm_device pointer to drm_private_obj
- bridge: Introduce drm_bridge_unplug, drm_bridge_enter, and
drm_bridge_exit
- dma-buf: Improve sg_table debugging
- dma-fence: Add new helpers, and use them when needed
- dp_mst: Avoid out-of-bounds access with VCPI==0
- gem: Reduce page table overhead with transparent huge pages
- panic: Report invalid panic modes
- sched: Add TODO entries
- ttm: Various cleanups
- vblank: Various refactoring and cleanups
- Kconfig cleanups
- Removed support for kdb
Driver Changes:
- amdxdna: Fix race conditions at suspend, Improve handling of zero
tail pointers, Fix cu_idx being overwritten during command setup
- ast: Support imported cursor buffers
-
- panthor: Enable timestamp propagation, Multiple improvements and
fixes to improve the overall robustness, notably of the scheduler.
- panels:
- panel-edp: Support for CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fix mm conflict]
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20251212-spectacular-agama-of-abracadabra-aaef32@penduick
|
|
Move x86's edid_info into sysfb_primary_display as a new field named
edid. Adapt all users.
An instance of edid_info has only been defined on x86. With the move
into sysfb_primary_display, it becomes available on all architectures.
Therefore remove this contraint from CONFIG_FIRMWARE_EDID.
x86 fills the EDID data from boot_params.edid_info. DRM drivers pick
up the raw data and make it available to DRM clients. Replace the
drivers' references to edid_info and instead use the sysfb_display_info
as passed from sysfb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
|
There are no implementations of fb_debug_enter and fb_debug_leave.
Remove the callbacks from struct fb_ops and clean up the caller.
The field save_graphics in fbcon_par is also no longer required.
Remove it as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-6-tzimmermann@suse.de
|
|
Protect vga_switcheroo_client_fb_set() with console lock. Avoids OOB
access in fbcon_remap_all(). Without holding the console lock the call
races with switching outputs.
VGA switcheroo calls fbcon_remap_all() when switching clients. The fbcon
function uses struct fb_info.node, which is set by register_framebuffer().
As the fb-helper code currently sets up VGA switcheroo before registering
the framebuffer, the value of node is -1 and therefore not a legal value.
For example, fbcon uses the value within set_con2fb_map() [1] as an index
into an array.
Moving vga_switcheroo_client_fb_set() after register_framebuffer() can
result in VGA switching that does not switch fbcon correctly.
Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(),
which already holds the console lock. Fbdev calls fbcon_fb_registered()
from within register_framebuffer(). Serializes the helper with VGA
switcheroo's call to fbcon_remap_all().
Although vga_switcheroo_client_fb_set() takes an instance of struct fb_info
as parameter, it really only needs the contained fbcon state. Moving the
call to fbcon initialization is therefore cleaner than before. Only amdgpu,
i915, nouveau and radeon support vga_switcheroo. For all other drivers,
this change does nothing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.17/source/drivers/video/fbdev/core/fbcon.c#L2942 # [1]
Fixes: 6a9ee8af344e ("vga_switcheroo: initial implementation (v15)")
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: <stable@vger.kernel.org> # v2.6.34+
Link: https://patch.msgid.link/20251105161549.98836-1-tzimmermann@suse.de
|
|
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL.
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
|
|
bit_putcs_aligned()/unaligned() derived the glyph pointer from the
character value masked by 0xff/0x1ff, which may exceed the actual font's
glyph count and read past the end of the built-in font array.
Clamp the index to the actual glyph count before computing the address.
This fixes a global out-of-bounds read reported by syzbot.
Reported-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=793cf822d213be1a74f2
Tested-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
|
