| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
- Add a trailing comma for initializers unless the closing brace is on
the same line and for the list terminator;
- Use a single space in the list terminator;
- A space after an opening { and before a closing };
- Use the PCI_DEVICE* macro in two drivers for pci_device_id entry
which is usual for these arrays
- No explicit zeros in the list terminator;
None of these changes introduces changes to the compiled result.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://patch.msgid.link/583653bc7b9ae19707bc28be69a20e66b8c3720a.1784299069.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
platform_device_id that replaces .driver_data by an anonymous union (though
this driver doesn't use .driver_data, so this patch isn't strictly
necessary for the plan, but still ok for consistency).
This patch doesn't modify the compiled array, only its representation
in source form benefits.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/9c4a5a5b086d4ce913e84dfa7d140a8b492d557b.1784299069.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
While touching this array, add a space to the list terminator to make it
match the most common usage.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/c189ce8aeae288e9d8bcdfff150957c6f3e6e37d.1784299069.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The read buffer allocation was changed from kmalloc() to kvmalloc().
This buffer is part of mei_cl_cb structure that can be queued in
rd_complete queue protected by spinlock.
Releasing the structure leads to errors like below when freeing buffer
that allocated non-contiguous:
BUG: sleeping function called from invalid context at mm/vmalloc.c:3448
Separate mei_cl_cb structure dequeue and release to
perform only dequeue under spinlock and push release out of spinlock.
Cc: stable <stable@kernel.org>
Fixes: 4adf613e01bf ("mei: use kvmalloc for read buffer")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16359
Reviewed-by: Menachem Adin <menachem.adin@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260719-kvfree_out_of_spinlock-v1-1-e07d6333bea7@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char/misc fixes AND this resolves two merge conflicts in:
drivers/android/binder/thread.rs
drivers/misc/nsm.c
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260717100533.601899-4-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the mix between __le32 and integer by casting
the MEI_LB2_CMD constant as __le32 while using it.
Fixes sparse waring:
drivers/misc/mei/mei_lb.c:284:32: sparse: sparse: restricted __le32 degrades to integer
drivers/misc/mei/mei_lb.c:330:40: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] command_id @@ got int @@
drivers/misc/mei/mei_lb.c:330:40: sparse: expected restricted __le32 [usertype] command_id
drivers/misc/mei/mei_lb.c:330:40: sparse: got int
Fixes: 773a43b8627f ("mei: lb: add late binding version 2")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605091533.79Zcv3CX-lkp@intel.com/
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260709-fix_type_le-v3-1-478761151e05@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix couple of problems in mei_cl_bus_dev_release():
mei_cl_flush_queues() is running without lock.
bus->file_list access after mei_dev_bus_put(bus) can become a
use-after-free if this was the last reference to bus.
Protect queues cleanup and WARN traversal by device lock there
to avoid the concurrent access problems.
Move WARN traversal before mei_dev_bus_put(bus).
This file uses bus variable name for mei_device, adjust
code of mei_cl_bus_dev_release() to use bus variable too.
Cc: stable <stable@kernel.org>
Fixes: 35e8a426b16a ("mei: bus: Check for still connected devices in mei_cl_bus_dev_release()")
Reviewed-by: Menachem Adin <menachem.adin@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260705151259.3054795-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adhere to termnator line rule and remove comma from
sentinel in enum mei_cfg_idx.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260409125524.111530-4-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Detect IO extender device and set appropriate kind.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Reuven Abliyev <reuvenab@gmail.com>
Signed-off-by: Reuven Abliyev <reuvenab@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260409125524.111530-3-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify flows and prepare for future flexibility by
storing kind as enum and converting to string only in sysfs.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Reuven Abliyev <reuvenab@gmail.com>
Signed-off-by: Reuven Abliyev <reuvenab@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260409125524.111530-2-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Nova Lake H device id.
Cc: stable <stable@kernel.org>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260405141758.1634556-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The second Late Binding version allows to send payload bigger
than client MTU by splitting it to chunks and uses separate
firmware client for transfer.
The component interface is unchanged and driver doing all splitting.
Only one Late Binding version is supported by firmware.
When Late binding version 2 is supported, the new client is advertised
by firmware and existing MKHI will have version 2.
This helps driver to select the right mode of work.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260405112326.1535208-3-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add mei_cldev_uuid API on mei bus to allow client
to query what UUID it bound to.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260405112326.1535208-2-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char/misc/iio/comedi fixes in here as well for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The CSC has firmware status registers in MMIO and they may be
unaccessible while device is suspended.
Wake device while reading firmware status via sysfs.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-8-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel PCI driver for chassis controller embedded in Intel graphics
devices.
An MEI device here called CSC can be embedded in discrete
Intel graphics devices having separate PCI device, to support a range
of chassis tasks such as graphics card firmware update and security tasks.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-7-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ensure that callers receive only < 0 return value on error.
Convert PCI error returned by pci_read_config_dword()
to common errno before returning from function.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-6-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend debug capabilities.
Add return value print in the trace_mei_pci_cfg_read().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-5-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move register trace near it actual read in the firmware status callback
and make it adhere to the actual read type.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-4-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
%01d is equal to %d, simplify the format.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-3-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop old local MEI_PCI_DEVICE macro and use common
PCI_DEVICE_DATA instead.
Update defines to adhere to current naming convention.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-2-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Intel Management Engine Interface is only present on x86 platforms
and Intel Xe graphics cards. Hence add a dependency on X86 or DRM_XE,
to prevent asking the user about this driver when configuring a kernel
for a non-x86 architecture and without Xe graphics support.
Fixes: 25f9b0d35155 ("misc/mei: Allow building Intel ME interface on non-x86")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/8e2646fb71b148b3d38beb13f19b14e3634a1e1a.1769541024.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected")
some devices started to show long resume times (5-7 seconds).
This happens as mei falsely detects unready hardware,
starts parallel link reset flow and triggers link reset timeouts
in the resume callback.
Address it by performing detection of unready hardware only
when driver is in the MEI_DEV_ENABLED state instead of blacklisting
states as done in the original patch.
This eliminates active waitqueue check as in MEI_DEV_ENABLED state
there will be no active waitqueue.
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221023
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260330083830.536056-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
We need the char/misc/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit
afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format")
forbids to emit event with a plain char* without a wrapper.
The reg parameter always passed as static string and wrapper
is not strictly required, contrary to dev parameter.
Use the string wrapper anyway to check sanity of the reg parameters,
store it value independently and prevent internal kernel data leaks.
Since some code refactoring has taken place, explicit backporting may
be needed for kernels older than 6.10.
Cc: stable@vger.kernel.org # v6.11+
Fixes: a0a927d06d79 ("mei: me: add io register tracing")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260111145125.1754912-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver is useful if at least one DRM driver registers an auxiliary device
for the ME interface. With the addition of Xe, this is no longer just i915.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-5-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While this is not a particularly useful configuration, the MEI code should
compile even when no drivers for a GPU containing a management engine are
built.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-4-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These are enumerated via an auxiliary bus, so there is no functional
dependency between these drivers, therefore allow compiling MEI as builtin
even when i915/xe are built as modules.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-3-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The xe driver supports dGPUs which can be plugged into non-x86 machines,
and exposes a MEI GSC interface, so this driver is no longer x86 only.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-2-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Nova Lake S device id.
Cc: stable <stable@kernel.org>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251215105915.1672659-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
mei_register() fails to release the device reference in error paths
after device_initialize(). During normal device registration, the
reference is properly handled through mei_deregister() which calls
device_destroy(). However, in error handling paths (such as cdev_alloc
failure, cdev_add failure, etc.), missing put_device() calls cause
reference count leaks, preventing the device's release function
(mei_device_release) from being called and resulting in memory leaks
of mei_device.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251104020133.5017-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
INTEL_MEI_GSC depends on either i915 or Xe
and can be present when either of above is present.
Cc: stable <stable@kernel.org>
Fixes: 87a4c85d3a3e ("drm/xe/gsc: add gsc device support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251109153533.3179787-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251027114118.390775-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Dismantle class device last in probe error flow to avoid accessing
freed memory like:
[ 87.926774] WARNING: CPU: 9 PID: 518 at kernel/workqueue.c:4234
__flush_work+0x340/0x390
...
[ 87.926912] Workqueue: async async_run_entry_fn
[ 87.926918] RIP: e030:__flush_work+0x340/0x390
[ 87.926923] Code: 26 9d 05 00 65 48 8b 15 26 3c ca 02 48 85 db 48 8b
04 24 48 89 54 24 58 0f 85 de fe ff ff e9 f6 fd ff ff 0f 0b e9 77 ff ff
ff <0f> 0b e9 70 ff ff ff 0f 0b e9 19 ff ff ff e8 7d 8b 0e 01 48 89 de
[ 87.926931] RSP: e02b:ffffc900412ebc00 EFLAGS: 00010246
[ 87.926936] RAX: 0000000000000000 RBX: ffff888103e55090 RCX: 0000000000000000
[ 87.926941] RDX: 000fffffffe00000 RSI: 0000000000000001 RDI: ffffc900412ebc60
[ 87.926945] RBP: ffff888103e55090 R08: ffffffffc1266ec8 R09: ffff8881109076e8
[ 87.926949] R10: 0000000080040003 R11: 0000000000000000 R12: ffff888103e54000
[ 87.926953] R13: ffffc900412ebc18 R14: 0000000000000001 R15: 0000000000000000
[ 87.926962] FS: 0000000000000000(0000) GS:ffff888233238000(0000) knlGS:0000000000000000
[ 87.926967] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 87.926971] CR2: 00007e7923b32708 CR3: 00000001088df000 CR4: 0000000000050660
[ 87.926977] Call Trace:
[ 87.926981] <TASK>
[ 87.926987] ? __call_rcu_common.constprop.0+0x11e/0x310
[ 87.926993] cancel_work_sync+0x5e/0x80
[ 87.926999] mei_cancel_work+0x19/0x40 [mei]
[ 87.927051] mei_me_probe+0x273/0x2b0 [mei_me]
[ 87.927060] local_pci_probe+0x45/0x90
[ 87.927066] pci_call_probe+0x5b/0x180
[ 87.927070] pci_device_probe+0x95/0x140
[ 87.927074] ? driver_sysfs_add+0x57/0xc0
[ 87.927079] really_probe+0xde/0x340
[ 87.927083] ? pm_runtime_barrier+0x54/0x90
[ 87.927087] __driver_probe_device+0x78/0x110
[ 87.927092] driver_probe_device+0x1f/0xa0
[ 87.927095] __driver_attach_async_helper+0x5e/0xe0
[ 87.927100] async_run_entry_fn+0x34/0x130
[ 87.927104] process_one_work+0x18d/0x340
[ 87.927108] worker_thread+0x256/0x3a0
[ 87.927111] ? __pfx_worker_thread+0x10/0x10
[ 87.927115] kthread+0xfc/0x240
[ 87.927120] ? __pfx_kthread+0x10/0x10
[ 87.927124] ? __pfx_kthread+0x10/0x10
[ 87.927127] ret_from_fork+0xf5/0x110
[ 87.927132] ? __pfx_kthread+0x10/0x10
[ 87.927136] ret_from_fork_asm+0x1a/0x30
[ 87.927141] </TASK>
Tested-by: Guenter Roeck <groeck@google.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Closes: https://lore.kernel.org/lkml/aQbYAXPADqfiXUYO@mail-itl/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/8deef7c4-ac75-4db8-91b7-02cf0e39e371@roeck-us.net/
Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Link: https://patch.msgid.link/20251102180836.1203314-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mei_register() should move before the mei_start() for hook
on class device to work.
Same change was implemented in mei-me, missed from mei-txe.
Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251019073659.2646791-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance in the new mei late binding code
originating from the type parameter of mei_lb_push_payload():
drivers/misc/mei/mei_lb.c:211:18: error: incompatible function pointer types initializing 'int (*)(struct device *, u32, u32, const void *, size_t)' (aka 'int (*)(struct device *, unsigned int, unsigned int, const void *, unsigned long)') with an expression of type 'int (struct device *, enum intel_lb_type, u32, const void *, size_t)' (aka 'int (struct device *, enum intel_lb_type, unsigned int, const void *, unsigned long)') [-Werror,-Wincompatible-function-pointer-types-strict]
211 | .push_payload = mei_lb_push_payload,
| ^~~~~~~~~~~~~~~~~~~
While 'unsigned int' and 'enum intel_lb_type' are ABI compatible, hence
no regular warning from -Wincompatible-function-pointer-types, the
mismatch will trigger a kCFI violation when mei_lb_push_payload() is
called indirectly.
Update the type parameter of mei_lb_push_payload() to be 'u32' to match
the prototype in 'struct intel_lb_component_ops', clearing up the
warning and kCFI violation.
Fixes: 741eeabb7c78 ("mei: late_bind: add late binding component driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250920-drm-xe-fix-wifpts-v1-1-c89b5357c7ba@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Wildcat Lake P device id.
Cc: stable@vger.kernel.org
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251016125912.2146136-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
Introduce a new MEI client driver to support Late Binding firmware
upload/update for Intel discrete graphics platforms.
Late Binding is a runtime firmware upload/update mechanism that allows
payloads, such as fan control and voltage regulator, to be securely
delivered and applied without requiring SPI flash updates or
system reboots. This driver enables the Xe graphics driver and other
user-space tools to push such firmware blobs to the authentication
firmware via the MEI interface.
The driver handles authentication, versioning, and communication
with the authentication firmware, which in turn coordinates with
the PUnit/PCODE to apply the payload.
This is a foundational component for enabling dynamic, secure,
and re-entrant configuration updates on platforms like Battlemage.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250905154953.3974335-3-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add a new helper function that allows MEI client drivers
to query the maximum transmission unit (MTU) for a connected
MEI client.
This is useful for clients that need to transmit large payloads,
such as firmware blobs, allowing them to determine the maximum
message size that can be safely sent before starting transmission and
size of the buffer to allocate when receiving data.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250905154953.3974335-2-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Alexander Usyskin <alexander.usyskin@intel.com> says:
When discrete graphic card enters D3cold th CSC engine is powered down.
On wakeup from the D3cold full HECI link reset is required. The driver
should detect that firmware requests link reset and initiate the link
reset flow.
In the usual flow the connect IOCTL will trigger the wake from D3cold
and corresponding link reset. The MEI driver invalidates all open
handles on link reset including the one that triggered the wake
rendering this connection unusable. To break this loop make connect
detect that it is interrupted by link reset and retry connect attempt
after reset was completed.
Link: https://lore.kernel.org/r/20250918130435.3327400-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Discrete graphic card can go to D3cold.
On the exit from D3cold the link reset is performed.
Driver did not expect such link reset and print warning.
Print debug message for unexpected reset in discrete graphic
case and remove infrastructure to print warning is some cases.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250918130435.3327400-6-alexander.usyskin@intel.com
|
|
There are flows, like exit from D3cold where connect via bus can fail.
Demote error print to debug level to unclutter dmesg.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250918130435.3327400-5-alexander.usyskin@intel.com
|
|
When device is in D3cold the connect message will wake device
and cause link reset.
Link reset flow cleans all queues and wakes all waiters.
Retry the connect flow if connect is failed and link reset is detected.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250918130435.3327400-4-alexander.usyskin@intel.com
|
