| Age | Commit message (Collapse) | Author |
|---|
|
irdma_check_mem_contiguous() and irdma_check_mr_contiguous() verify that
PBL entries describe physically contiguous memory ranges.
Both functions calculate byte offsets using 32-bit operands. For example,
with 4 KiB pages, pg_size * pg_idx overflows 32-bit arithmetic when
pg_idx reaches 1048576. In the level-2 check, PBLE_PER_PAGE is 512, so
i * pg_size * PBLE_PER_PAGE overflows when i reaches 2048.
These values are reachable in the driver. For MRs, palloc->total_cnt
comes from iwmr->page_cnt, which is calculated by
ib_umem_num_dma_blocks(). The MR size is limited by IRDMA_MAX_MR_SIZE,
so a 4 GiB MR with 4 KiB pages can reach page_cnt of 1048576. PBLE
resources do not exclude this value either: for gen3, the limit is based
on avail_sds * MAX_PBLE_PER_SD, and MAX_PBLE_PER_SD is 0x40000, so 4 SDs
are enough for 1048576 PBLEs.
Cast one operand to u64 before the multiplications so that the offset
calculations are performed in 64-bit arithmetic.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Aleksandrova Alyona <aga@itb.spb.ru>
Link: https://patch.msgid.link/20260624144846.61242-1-aga@itb.spb.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list.
Fixes: f29dd55b0236 ("rdma/siw: queue pair methods")
Link: https://patch.msgid.link/r/20260630060040.966461-1-ruoyuw560@gmail.com
Suggested-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In hns_roce_cleanup_mhop_hem_table(), the expression:
obj = i * buf_chunk_size / table->obj_size;
is evaluated using 32-bit unsigned arithmetic because
'buf_chunk_size' is u32 and the usual arithmetic conversions convert
'i' to unsigned int. The result is assigned to a u64 variable, but the
multiplication may overflow before the assignment.
For sufficiently large HEM tables, this produces an incorrect object
index passed to hns_roce_table_mhop_put().
Cast 'i' to u64 before the multiplication so that the intermediate
calculation is performed with 64-bit arithmetic.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a25d13cbe816 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08")
Link: https://patch.msgid.link/r/20260627095951.51378-1-listdansp@mail.ru
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move the zero CQE validation before rdma_zalloc_drv_obj() to avoid
leaking the CQ object when returning -EINVAL.
Fixes: a2917582887a ("RDMA/core: Reject zero CQE count")
Link: https://patch.msgid.link/r/20260625020148.224537-1-zhaochenguang@kylinos.cn
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
mana_ib_post_send() returns err after walking the send work request list.
If the caller passes an empty list, the loop is skipped and err is not
assigned.
Initialize err to 0 so an empty send work request list returns success
instead of stack data.
Fixes: c8017f5b4856 ("RDMA/mana_ib: UD/GSI work requests")
Link: https://patch.msgid.link/r/20260618041752.481193-2-ruoyuw560@gmail.com
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
erdma_post_recv() returns ret after walking the receive work request list.
If the caller passes an empty list, the loop is skipped and ret is not
assigned.
Initialize ret to 0 so an empty receive work request list returns success
instead of stack data.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Link: https://patch.msgid.link/r/20260618041752.481193-1-ruoyuw560@gmail.com
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://patch.msgid.link/r/20260617164013.280790-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Reviewed-by: David Hu <xuehaohu@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When a QP/CQ/SRQ is created, a two step process is used
where the buffer is allocated in userspace and explicitly
registered with the normal reg_mr mechanism prior to creating
the actual QP/CQ/SRQ object.
These special registrations are indicated via an ABI field
so the driver knows that they do not have a valid mkey and
to skip the actual CQP command submission.
Since these are real MR objects from the core's perspective,
it is possible for a user application to invoke rereg_mr on them
and cause a real CQP op to be emitted with the zero-initialized
mkey value of 0.
Fix this by preventing rereg_mr on these special regions.
Fixes: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Reviewed-by: David Hu <xuehaohu@google.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The cited commit hardcoded the hardware address comparison len to ETH_ALEN.
This breaks IPoIB, which uses 20-byte addresses. By truncating the
memcmp, the CMA may incorrectly assume the target address is
unchanged and fails to abort the stalled connection.
Fix this by replacing ETH_ALEN with the dynamic neigh->dev->addr_len
to correctly evaluate the full address regardless of the link layer.
Fixes: 925d046e7e52 ("RDMA/core: Add a netevent notifier to cma")
Signed-off-by: Or Gerlitz <ogerlitz@ddn.com>
Link: https://patch.msgid.link/20260617-fix-cma-ipoib-v1-1-03f869344304@ddn.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Building mlx5 on s390 shows a rather high stack usage that can exceed
the warning limit when that is set to a lower but still reasonable value:
drivers/infiniband/hw/mlx5/wr.c:1051:5: error: stack frame size (1328) exceeds limit (1280) in 'mlx5_ib_post_send' [-Werror,-Wframe-larger-than]
The problem here is 'struct ib_reg_wr' on the stack of
handle_reg_mr_integrity(), which gets inlined into mlx5_ib_post_send()
along with a number of smaller functions.
Keeping the inner function out of line like gcc does avoids the
warning and reduces the total stack usage in other functions called
from mlx5_ib_post_send(), though handle_reg_mr_integrity() itself
still has the same problem as before.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260612201611.4127750-1-arnd@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Kernel-handled RMPP receive processing starts reassembly for active
DATA responses before the response is matched to an outstanding send.
The normal match happens later, after ib_process_rmpp_recv_wc() has
either assembled a complete message or consumed the segment.
That ordering lets an unsolicited response that routes to a kernel
RMPP agent by the high TID bits allocate or extend RMPP receive state
before the full TID and source address are checked against a real
request. A reordered burst can therefore reach the receive-side
insertion path even though the response would not match any send.
For kernel-handled RMPP DATA responses, require the existing
ib_find_send_mad() match before entering RMPP reassembly. The matcher
already checks the full TID, management class and source address/GID
against the agent wait, backlog and in-flight send lists. If there is
no match, drop the response without creating RMPP state.
This leaves the RMPP window behavior unchanged and only rejects
responses that have no corresponding request.
Fixes: fa619a77046b ("[PATCH] IB: Add RMPP implementation")
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/3170ff3bc389a930bb1641f2caa394a0b2241579.1780774907.git.michael.bommarito@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Many AI driven bug fixes, and several big driver API cleanups
- Driver bug fixes and minor cleanups in mlx5, hns, rxe, efa, siw,
rtrs, mana, irdma, mlx4. Commonly error path flows, integer
arithmetic overflows on unsafe data, out of bounds access, and use
after free issues under races.
- Second half of the new udata API for drivers focusing on uAPI
response
- bnxt_re supports more options for QP creation that will allow a dv
path in rdma-core
- Untangle the module dependencies so drivers don't link to
ib_uverbs.ko as was originall intended
- Provide a new way to handle umems with a consistent simplified uAPI
and update several drivers to use it. This brings dmabuf support to
more places and more drivers
- Support for mlx5 rate limit and packet pacing for UD and UC
- A batch of fixes for the new shared FRMR pools infrastructure"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (148 commits)
RDMA/irdma: Replace waitqueue and flag with completion
RDMA/hns: Fix memory leak of bonding resources
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
docs: infiniband: correct name of option to enable the ib_uverbs module
RDMA/bnxt_re: Reject GET_TOGGLE_MEM when toggle page was not allocated
RDMA/bnxt_re: Fail DBR related page allocation UAPIs if the feature is disabled
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
RDMA/bnxt_re: Proper rollback if the ioremap fails
RDMA/bnxt_re: Add a max slot check for SQ
RDMA/bnxt_re: Avoid displaying the kernel pointer
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
RDMA/bnxt_re: Initialize dpi variable to zero
ABI: sysfs-class-infiniband: minor cleanup
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
RDMA/mlx5: Fix undefined shift of user RQ WQE size
RDMA/mlx5: Remove raw RSS QP restrack tracking
RDMA/mlx5: Remove DCT restrack tracking
RDMA/mlx5: Drop FRMR pool handle on UMR revoke failure
RDMA/core: Add ib_frmr_pool_drop for unrecoverable handles
...
|
|
The driver previously used a waitqueue along with an explicit
request_done flag, but without proper barriers around request_done.
An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted
to fix this by adding the missing memory barriers. Rather than
adding the barriers, this patch replaces the waitqueue+flag with
a completion, which is designed for this exact purpose.
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Link: https://patch.msgid.link/r/20260616155601.1081448-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In a corner case of concurrent driver removal and driver reset,
bonding resource is first released in hns_roce_hw_v2_exit() during
driver removal, and then is allocated again in hns_roce_register_device()
during driver reset. This leads to memory leak because the release
timing has already passed. This may also lead to a kernel panic
as below because of the leaked notifier callback:
Call trace:
0xffffa20fccc04978 (P)
raw_notifier_call_chain+0x20/0x38
call_netdevice_notifiers_info+0x60/0xb8
netdev_lower_state_changed+0x4c/0xb8
As Sashiko suggested, the teardown order of bonding resources should
be inverted to make sure the resources are released when the driver
is removed.
Fixes: b37ad2e290fc ("RDMA/hns: Initialize bonding resources")
Link: https://patch.msgid.link/r/20260613102045.811623-1-huangjunxian6@hisilicon.com
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When the server answers an RTRS READ, rdma_write_sg() builds the source
scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the
peer. Its length is taken directly from the wire descriptor:
plist->length = le32_to_cpu(id->rd_msg->desc[0].len);
rd_msg points into the chunk buffer that the remote peer filled via
RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->
process_read()), so desc[0].len is attacker-controlled and, before this
change, was only rejected when zero. The source address is the fixed
chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide
local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs
layer does not constrain the transfer length to max_chunk_size. msg_id
and off are bounded against queue_depth and max_chunk_size in
rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not
checked against the chunk size.
A peer that advertises desc[0].len larger than max_chunk_size can make
the posted RDMA write read past the chunk's mapped region. The resulting
behaviour depends on the IOMMU configuration: with no IOMMU or in
passthrough mode the read may extend into memory adjacent to the chunk
and be returned to the peer, which can disclose host memory; with a
translating IOMMU the out-of-range access is expected to fault and abort
the connection. In either case the transfer exceeds what the protocol
permits and is driven by a remote peer.
Reject a descriptor length above max_chunk_size, mirroring the existing
off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients
do not exceed it: the client sets desc[0].len to its MR length, which is
capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE).
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://patch.msgid.link/r/20260612-master-v1-1-70cde5c6fdc9@gmail.com
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
If a user calls BNXT_RE_METHOD_GET_TOGGLE_MEM on a device that does not
support the CQ/SRQ toggle feature, uctx_cq_page or uctx_srq_page will
be NULL.
Add an explicit -EOPNOTSUPP return after capturing the address from
uctx_cq_page / uctx_srq_page if the address is zero.
Fixes: e275919d9669 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace")
Fixes: 181028a0d84c ("RDMA/bnxt_re: Share a page to expose per SRQ info with userspace")
Link: https://patch.msgid.link/r/20260615224751.232802-16-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
No need to support the DBR related page allocations if the pacing feature
is disabled. Fail the request if pacing is disabled.
Fixes: ea2224857882 ("RDMA/bnxt_re: Update alloc_page uapi for pacing")
Link: https://patch.msgid.link/r/20260615224751.232802-15-selvin.xavier@broadcom.com
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Applications can request multiple WC pages for the same ucontext.
As of now, only 1 WC page per ucontext is supported. Add a lock to
avoid concurrent access and a check to fail repeated requests.
Also, if the mmap entry insert fails for the WC, free the Doorbell
page index mapped for the WC page.
Fixes: eee6268421a2 ("RDMA/bnxt_re: Move the UAPI methods to a dedicated file")
Fixes: 360da60d6c6e ("RDMA/bnxt_re: Enable low latency push")
Link: https://patch.msgid.link/r/20260615224751.232802-12-selvin.xavier@broadcom.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
bnxt_qplib_alloc_dpi returns success even if ioremap fails.
Add the proper rollback when the ioremap fails and return
-ENOMEM status.
Fixes: 0ac20faf5d83 ("RDMA/bnxt_re: Reorg the bar mapping")
Fixes: 360da60d6c6e ("RDMA/bnxt_re: Enable low latency push")
Link: https://patch.msgid.link/r/20260615224751.232802-11-selvin.xavier@broadcom.com
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The variable WQE mode must be validated against
the maximum slots supported by HW. The max supported
value is 64K. Adding a max and min check and fail if user
supplied value is more than the max supported and zero.
Fixes: d8ea645d6984 ("RDMA/bnxt_re: Handle variable WQE support for user applications")
Link: https://patch.msgid.link/r/20260615224751.232802-10-selvin.xavier@broadcom.com
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
While dumping the info on MR using the rdma tool, we
dump the mr_hwq which is a kernel pointer. There is
no need to expose this value for end user. So avoid
it.
Fixes: 7363eb76b7f3 ("RDMA/bnxt_re: Support driver specific data collection using rdma tool")
Link: https://patch.msgid.link/r/20260615224751.232802-9-selvin.xavier@broadcom.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write
the toggle value to an already-freed page. Move free_page() after
bnxt_qplib_destroy_cq.
Fixes: e275919d9669 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace")
Link: https://patch.msgid.link/r/20260615224751.232802-4-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write
the toggle values to an already-freed page. Move free_page() after
bnxt_qplib_destroy_srq().
Fixes: 181028a0d84c ("RDMA/bnxt_re: Share a page to expose per SRQ info with userspace")
Link: https://patch.msgid.link/r/20260615224751.232802-3-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied
for all the cases. So initialize the dpi to 0.
Fixes: eee6268421a2 ("RDMA/bnxt_re: Move the UAPI methods to a dedicated file")
Fixes: 360da60d6c6e ("RDMA/bnxt_re: Enable low latency push")
Link: https://patch.msgid.link/r/20260615224751.232802-2-selvin.xavier@broadcom.com
Reviewed-by: Anantha Prabhu <anantha.prabhu@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e85 ("net: txgbe: rework service event handling")
57d39faed4c9 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b73 ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2a6 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b727 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d5e ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Free the UAR index returned by the hardware.
Fixes: 4ed131d0bb15 ("IB/mlx5: Expose dynamic mmap allocation")
Link: https://patch.msgid.link/r/20260611-fix-uar-release-v1-1-f5464d845dbf@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on
the user-provided rq_wqe_shift, which is only checked to be greater than
32, so shifts of 32 are still accepted. A shift of 31 also overflows a
signed integer, leading to undefined behavior.
Use check_shl_overflow() to compute the RQ WQE size and reject any
invalid values.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://patch.msgid.link/r/20260611-maher-sec-fixes-v1-1-cd8eb2542869@nvidia.com
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Raw RSS QP restrack tracking wasn't working to begin with as it was
only tracking the first raw RSS QP which was added, since at creation
the raw RSS QP number is reserved so the QP number for this qp type
was always zero.
The following raw RSS QP additions were always failing silently.
Since the fix isn't trivial and there were no users that required or
complained about this issue we are dropping this for now instead of fixing.
Fixes: 968f0b6f9c01 ("RDMA/mlx5: Consolidate into special function all create QP calls")
Link: https://patch.msgid.link/r/20260607-restrack-uaf-fix-v1-2-d72e45eb76c2@nvidia.com
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
DCT restrack tracking wasn't working to begin with as it was only
tracking the first DCT which was added, since at creation the DCT number
isn't yet initialized because the DCT FW object is only created during
modify. The following DCT additions were failing silently.
Since the fix isn't trivial and there were no users that required or
complained about this issue we are dropping this for now instead of fixing.
Fixes: fd3af5e21866 ("RDMA/mlx5: Track DCT, DCI and REG_UMR QPs as diver_detail resources.")
Link: https://patch.msgid.link/r/20260607-restrack-uaf-fix-v1-1-d72e45eb76c2@nvidia.com
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When UMR revoke fails during MR cleanup, the handle is left in an
unknown state and cannot be returned to the pool. The driver already
destroys the mkey via the fallback path, but the pool's in_use counter
is never decremented, drifting upward over time.
Call ib_frmr_pool_drop on the revoke-failure path so the pool's
accounting stays consistent with the handles it has handed out.
Fixes: 36680ef7bceb ("RDMA/mlx5: Switch from MR cache to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-10-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A driver that has popped a handle from an FRMR pool can hit failures
that leave the handle in a state where it can't safely be returned
for reuse. The driver destroys the handle itself, but the pool has
no way to learn about it, so the in_use counter drifts upward.
Add ib_frmr_pool_drop to balance the pool's accounting in this case.
Every pop is now balanced by exactly one push or drop.
Fixes: 36680ef7bceb ("RDMA/mlx5: Switch from MR cache to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-9-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Failure to push a handle to the pool, caused by ENOMEM on queue page
allocation, will trigger missing in_use counter update, skewing pool
state indefinitely.
Fix that by moving the handling of handle destruction in such case
into the FRMR code, ensuring the handle is either pushed to the pool
or destroyed inside the same function.
Adjust mlx5_ib call site accordingly.
Fixes: ce5df0b891ed ("IB/core: Introduce FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-8-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In case a driver calls FRMR pop operation without a successful init,
return after triggering a warning to avoid the NULL dereference.
Fixes: ce5df0b891ed ("IB/core: Introduce FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-7-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add destruction of FRMR handles in case the push to the pool fails.
This prevents resources leak in case pool page allocation fails.
Fixes: 020d189d16a6 ("RDMA/core: Add pinned handles to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-6-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Aging pools with pinned handles requires moving handles from the
active queue to a non-empty inactive queue that might fail on new page
allocation, we are currently not handling the fault and leaking any mkey
that fails the push.
Fix by Introducing push_queue_to_queue_locked() that fills the
destination's partial tail page from the source and then splices the
remaining source pages onto the destination, performing no allocation.
Replace the per-handle move loop in age_pinned_pool() and the
open-coded splice in pool_aging_work() with calls to the helper.
As the helper cannot fail under memory pressure, removing a class of
GFP_ATOMIC allocations under the pool lock and simplifying the error
flow.
Fixes: 020d189d16a6 ("RDMA/core: Add pinned handles to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-5-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When creating FRMR handles following a netlink command to pin handles,
use the key after driver callback instead of using the key passed directly
from user.
Fixes: 020d189d16a6 ("RDMA/core: Add pinned handles to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-4-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix reading the PH value from the FRMR pool key by shifting the pool key
to the relevant bits.
Fixes: 36680ef7bceb ("RDMA/mlx5: Switch from MR cache to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-3-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix the indices of mkeys destroyed in case of an error in batch mkey
creation.
Fixes: 36680ef7bceb ("RDMA/mlx5: Switch from MR cache to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-2-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove IB_QP_RATE_LIMIT from the qp_state_table and instead
pass it through ib_modify_qp_is_ok() unconditionally. This
delegates rate limit attribute validation to the individual
drivers that support it.
As rate limit support expands to additional QP types and transitions
across different vendors, centralizing this policy in the core becomes
impractical. Each driver is better positioned to enforce its own
supported QP types and transitions over non-standard attributes.
Future support for non-standard attributes will be handled per vendor
driver instead of in generic IB core qp_state_table.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-8-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Rate limit transition validation for RC QPs currently relies on
the IB core qp_state_table. Add a driver-level helper to validate
the rate limit attribute directly during QP modify, ensuring it
is only accepted for RC QPs in INIT->RTR, RTR->RTS and RTS->RTS
transitions.
This makes the driver responsible for rate limit validation
and prepares for a follow-up IB core change that delegates
IB_QP_RATE_LIMIT and all future non-standard modify attributes
handling to individual vendor drivers.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-7-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Rate limit transition validation for RC QPs currently relies on
the IB core qp_state_table. Add a driver-level helper to validate
the rate limit attribute directly during QP modify, ensuring it
is only accepted for RC QPs in INIT->RTR, RTR->RTS and RTS->RTS
transitions.
This makes the driver responsible for rate limit validation
and prepares for a follow-up IB core change that delegates
IB_QP_RATE_LIMIT and all future non-standard modify attributes
handling to individual vendor drivers.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-6-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When querying device, report packet pacing capabilities for UD and
UC QPs when device supports it.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-5-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Allow passing a rate limit attribute in modify QP flows even when the
QP is in a state that does not support packet pacing programming in
the lower layers.
When the user sets a rate limit during a QP transition that is not to
RTS, store the value in the mlx5 QP struct and program it to FW when
the QP later transitions to RTS, which is the state that allows
configuring the rate limit index in the QP context.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-4-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Rate limiting is currently supported only for raw packet QPs, where
the packet pacing index is programmed into the SQC during SQ modify.
Extend rate limit support to UD and UC QPs by setting the pacing
index in the QPC during RTR2RTS and RTS2RTS transitions.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-3-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Refactor the raw packet QP modify path to extract rate limit
configuration into a qp_rl_parse() helper that parses user attributes,
and a qp_rl_prepare() helper that handles FW rate limit table
adjustments before the SQ modify itself.
Use qp_rl_commit() to commit changes to QP once FW call
succeeds, and qp_rl_rollback() to rollback changes done to
the FW rate limit table in the prepare stage, in case the
modify operation fails.
These helpers will be reused for extending rate limit support to
additional QP types in the following patch.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-2-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When rdma_resolve_addr() is invoked with a broadcast destination on an
IPoIB interface, is_dst_local() inspects the resolved route and
incorrectly concludes that the address is local. As a result, the
resolution fails with -ENODEV.
The issue stems from using '&' to compare rt_type with RTN_LOCAL. The
RTN_* values form a sequential enum, not a bitmask (RTN_LOCAL=2,
RTN_BROADCAST=3). Thus, "rt_type & RTN_LOCAL" yields a non-zero result
for a broadcast route as well.
Replace '&' with '==' when comparing rt_type against RTN_LOCAL.
Link: https://patch.msgid.link/r/20260609-fix-rdma-resolve-addr-v1-1-449b8b4e6c09@nvidia.com
Cc: stable@vger.kernel.org
Fixes: c31e4038c97f ("RDMA/core: Use route entry flag to decide on loopback traffic")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
bnxt_re_debugfs_add_pdev() allocates per-file private data for the CC
configuration debugfs entries. The loop that initializes those entries
uses rdev->cc_config_params immediately, so allocation failure would lead
to NULL pointer dereferences while setting up debugfs.
Debugfs is best-effort. If the CC configuration private data cannot be
allocated just stop.
Link: https://patch.msgid.link/r/20260606040644.13-1-ruoyuw560@gmail.com
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Change the return type of ndo_set_rx_mode_async from void to int to
allow drivers to report failures back to the core stack. This is a
prerequisite for adding retry logic in the core when drivers fail to
program RX filters (e.g. bnxt VF when PF is unavailable).
All existing implementations return 0 for now, maintaining current
behavior.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260608154014.227538-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the GIC functions to allocate interrupt contexts for RDMA EQs. These
interrupt contexts may be shared with Ethernet EQs when MSI-X vectors
are limited.
The driver now supports allocating dedicated MSI-X for each EQ. Indicate
this capability through driver capability bits. The RDMA EQs pass
use_msi_bitmap=false to share MSI-X vectors with Ethernet, while the
capability flag advertises that the driver supports per-vPort EQ
separation when hardware has sufficient vectors.
Populate eq.irq on all RDMA EQs for consistency with the Ethernet path.
Also relocate the GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE define to its
numeric BIT(6) position among the other capability flags.
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/20260605005717.2059954-7-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To prepare for assigning vPorts to dedicated MSI-X vectors, remove EQ
sharing among the vPorts and create dedicated EQs for each vPort.
Move the EQ definition from struct mana_context to struct mana_port_context
and update related support functions. Export mana_create_eq() and
mana_destroy_eq() for use by the MANA RDMA driver.
RSS QPs now take a vport reference via pd->vport_use_count to ensure
EQs outlive all QP consumers. The vport must already be configured by
a raw QP before an RSS QP can be created. EQs are only destroyed when
the last QP (raw or RSS) on the PD releases its reference.
Restrict each vport to a single RSS QP. The hardware only supports one
steering configuration (indirection table / hash key) per vport, and
mana_disable_vport_rx() on QP destroy disables RX globally for the
vport. Previously, creating a second RSS QP would silently overwrite
the first QP's steering config and destroy would blackhole all traffic.
This is now explicitly rejected with -EBUSY. Existing applications
(DPDK being the primary RDMA consumer) always create one RSS QP per
vport, so no real-world flows are affected.
Reject cross-port PD sharing for both raw and RSS QPs. Since EQs and
vport configuration are per-port, a PD is bound to the port used by
its first raw QP. Subsequent QPs on the same PD must use the same
port or the creation fails with -EINVAL. Previously this was silently
broken: with shared EQs it appeared to work, but with per-vPort EQs
a cross-port PD would cause wrong-port EQ teardown and corruption.
DPDK creates one PD per port so no existing flows are affected.
Serialize mana_set_channels() and the async per-port queue reset
handler against RDMA vport configuration to prevent RDMA from claiming
the vport during the detach/attach window. A channel_changing flag is
set under apc->vport_mutex before detach and checked by
mana_cfg_vport() when called from the RDMA path, blocking RDMA from
grabbing the vport during the entire window. When the port is down
and RDMA already holds the vport, the channel change is rejected with
-EBUSY.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-2-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
