| Age | Commit message (Collapse) | Author |
|
[Why]
Debugging underflow issues frequently requires knowing the
HW state at the time of underflow. To enable capturing this
HW state information, interface functions are needed for the
various DC HW blocks.
[How]
This change adds the interface functions to read HW state for
the following DC HW blocks:
- HUBBUB
- HUBP
- DPP
- MPC
- OPP
- DSC
- OPTC
- DCCG
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Karen Chen <Karen.Chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
dml2 folder contains all logic for all versions of DML2
This is currently DML2.0 and DML2.1.
Rename dml2 to dml2_0 folder to reflect this better (dml2_0
for DML2.0).
[How]
Rename dml2 to dml2_0 folder and update dml2 references to
use dml2_0 folder.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: waynelin <Wayne.Lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
It was placed after the early return and the notification is never sent.
[How]
Place it after .set_drr and before the return.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Payloads are ignored because the wrong index is written as part of the
pipe update implementation for DCN401.
[How]
Align it to the DCN35 implementation and ensure the + 1 is added.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Newer asics can have mismatching dpp and opp counts and
dml needs to account for this.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Backport reset sequence fixes implemented on DCN401 to DCN32 to address
stability issues when resetting the DMUB.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The bigger of CONFIG_FRAME_WARN and frame_warn_limit is used to
trigger warnings about large stack frames. The dml_core_mode_support()
stack frame has grown to 2056.
[How]
Update frame_warn_limit to 2056 so that CONFIG_FRAME_WARN of 2048 doesn't
cause a failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4609
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit 0887054d14ae ("drm/amd: Drop abm_level property") dropped the
abm level property in favor of sysfs control. Since then there have
been discussions that compositors showed an interest in modifying
a vendor specific property instead.
So re-introduce the abm level property, but with different semantics.
Rather than being an integer it's now an enum. One of the enum options
is 'sysfs', and that is because there is still a sysfs file for use by
userspace when the compositor doesn't support this property.
If usespace has not modified this property, the default value will
be for sysfs to control it. Once userspace has set the property stop
allowing sysfs control.
The property is only attached to non-OLED eDP panels.
Cc: Xaver Hugl <xaver.hugl@kde.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function amdgpu_virt_get_dynamic_data_info() writes a 64-bit size
value. In two places (amdgpu_bios.c and amdgpu_discovery.c), the code
passed the address of a smaller variable by casting it to u64 *, which
is unsafe.
This could make the function write more bytes than the smaller variable
can hold, possibly overwriting nearby memory. Reported by static
analysis tools.
v2: Dynamic region size comes from the host (SR-IOV setup) and is always
fixed to 5 MB. (Lijo/Ellen)
5 MB easily fits inside a 32-bit value, so using a 64-bit type is not
needed. It also avoids extra type casts
Fixes: b4a8fcc7826a ("drm/amdgpu: Add logic for VF ipd and VF bios to init from dynamic crit_region offsets")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Ellen Pan <yunru.pan@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Due to low memory or when num of pages is too big to be
accomodated, allocation could fail for pfn's.
Chekc hmm_pfns for NULL before calling the kvfree for the it.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch extends the VCN_RESET capability check to include pgm 7 when the firmware version is 0x07551400 or newer.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function amdgpu_virt_init_critical_region() contained an invalid
check for a negative init_hdr_offset value:
if (init_hdr_offset < 0)
Since init_hdr_offset is an unsigned 32-bit integer, this condition can
never be true and triggers a Smatch warning:
warn: unsigned 'init_hdr_offset' is never less than zero
In addition, the subsequent bounds check: if ((init_hdr_offset +
init_hdr_size) > vram_size) was vulnerable to integer overflow when
adding the two unsigned values. Thus, by promoting offset and size to
64-bit and using check_add_overflow() to safely validate the sum against
VRAM size.
Fixes: 07009df6494d ("drm/amdgpu: Introduce SRIOV critical regions v2 during VF init")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Ellen Pan <yunru.pan@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: e8529dbc75ca ("drm/amdgpu: add ip offset support for cyan skillfish")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: d1bb64651095 ("drm/amdgpu: add irq source ids for VCN5_0/JPEG5_0")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: 523b69c65445 ("drm/amd/include: Add amd cper header")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These should be MIT. The driver in general is MIT and
the license text at the top of the files is MIT so fix
it.
Fixes: 92d5d2a09de1 ("drm/amdgpu: Introduce funcs for populating CPER")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_userq_buffer_vas_list_cleanup()
The amdgpu_userq_buffer_va_list_del() function frees "va_cursor" but it
is dereferenced on the next line when we print the debug message. Print
the debug message first and then free it.
Fixes: 2a28f9665dca ("drm/amdgpu: track the userq bo va for its obj management")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18aafc59b106 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18edef19ea44 ("drm/amd/powerplay: implement fw image related smu interface for Fiji.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'table_index' is a variable defined by the smu driver (kmd)
'table_id' is a variable defined by the hw smu (pmfw)
This code should use table_index as a bounds check.
Fixes: caad2613dc4bd ("drm/amd/powerplay: move table setting common code to smu_cmn.c")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
disabled on DCN30
Before commit 33056a97ae5e ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
checked the low-power debug flag before calling
dpp3_power_on_blnd_lut(false).
After commit 33056a97ae5e ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
unconditionally calls dpp3_power_on_blnd_lut(false). The BLNDGAM power
helper writes BLNDGAM_MEM_PWR_FORCE when CM low-power is disabled, causing
immediate SRAM power toggles instead of deferring at vupdate. This can
disrupt atomic color/LUT sequencing during transitions between
direct scanout and composition within gamescope's DRM backend on
Steam Deck OLED.
To fix this, leave the BLNDGAM power state unchanged when low-power is
disabled, matching dpp3_power_on_hdr3dlut and dpp3_power_on_shaper.
Fixes: 33056a97ae5e ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Display uniras version in sysfs version interface
when uniras enable.
v2: display ras version detail info
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Query the sub-revision field in the IP Discovery table for the VFs
to obtain their revision ID.
Meanwhile, read the revision ID from the strap register for the PF.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clear bad page info of ras module.
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1:
Pause the workload setting in dm when doinn idle optimization
v2:
Rebase patch to latest kernel code base (kernel 6.16)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Newer VPE microcode has functionality that will decrease DPM level
only when a workload has run for 2 or more seconds. If VPE is turned
off before this DPM decrease and the PMFW doesn't reset it when
power gating VPE, the SOC can get stuck with a higher DPM level.
This can happen from amdgpu's ring buffer test because it's a short
quick workload for VPE and VPE is turned off after 1s.
[How]
In idle handler besides checking fences are drained check PMFW version
to determine if it will reset DPM when power gating VPE. If PMFW will
not do this, then check VPE DPM level. If it is not DPM0 reschedule
delayed work again until it is.
v2: squash in return fix (Alex)
Cc: Peyton.Lee@amd.com
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
amdxdna:
- Support reading last hardware error
Cross-subsystem Changes:
dma-buf:
- heaps: Create heap per CMA reserved location; Improve user-space documentation
Core Changes:
atomic:
- Clean up and improve state-handling interfaces, update drivers
bridge:
- Improve ref counting
buddy:
- Optimize block management
Driver Changes:
amdxdna:
- Fix runtime power management
- Support firmware debug output
ast:
- Set quirks for each chip model
atmel-hlcdc:
- Set LCDC_ATTRE register in plane disable
- Set correct values for plane scaler
bochs:
- Use vblank timer
bridge:
- synopsis: Support CEC; Init timer with correct frequency
cirrus-qemu:
- Use vblank timer
imx:
- Clean up
ivu:
- Update JSM API to 3.33.0
- Reset engine on more job errors
- Return correct error codes for jobs
komeda:
- Use drm_ logging functions
panel:
- edp: Support AUO B116XAN02.0
panfrost:
- Embed struct drm_driver in Panfrost device
- Improve error handling
- Clean up job handling
panthor:
- Support custom ASN_HASH for mt8196
renesas:
- rz-du: Fix dependencies
rockchip:
- dsi: Add support for RK3368
- Fix LUT size for RK3386
sitronix:
- Fix output position when clearing screens
qaic:
- Support dma-buf exports
- Support new firmware's READ_DATA implementation
- Replace kcalloc with memdup
- Replace snprintf() with sysfs_emit()
- Avoid overflows in arithmetics
- Clean up
- Fixes
qxl:
- Use vblank timer
rockchip:
- Clean up mode-setting code
vgem:
- Fix fence timer deadlock
virtgpu:
- Use vblank timer
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20251021111837.GA40643@linux.fritz.box
|
|
schedule_dc_vmin_vmax() is called by dm_crtc_high_irq(). Hence, we
cannot have the former sleep. Use GFP_NOWAIT for allocation in this
function.
Fixes: c210b757b400 ("drm/amd/display: fix dmub access race condition")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c04812cbe2f247a1c1e53a9b6c5e659963fe4065)
Cc: stable@vger.kernel.org
|
|
[why]
1.) dc->links[MAX_LINKS] array size smaller than actual requested.
max_connector + max_dpia + 4 virtual = 14.
increase from 12 to 14.
2.) hw_init() access null LINK_ENC for dpia non display_endpoint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d7f5a61e1b04ed87b008c8d327649d184dc5bb45)
Cc: stable@vger.kernel.org
|
|
[Why]
On a mst branch with multi display setup, dc context is obselete
after updating the first stream. Referencing the same dc context
for the next stream update to fetch dc pointer leads to NULL
pointer dereference.
[How]
Get the dc pointer from the link rather than context.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc69b48988b171d6ccb3a083607e4dff015e2c0d)
Cc: stable@vger.kernel.org
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
|
|
Discovery related members are now part of amdgpu_discovery_info.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Query block error count of ras module.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
crit_region offsets
1. Added VF logic to init data exchange region using the offsets from dynamic(v2) critical regions;
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
crit_region offsets
1. Added VF logic in amdgpu_virt to init IP discovery using the offsets from dynamic(v2) critical regions;
2. Added VF logic in amdgpu_virt to init bios image using the offsets from dynamic(v2) critical regions;
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- During guest driver init, asa VFs receive PF msg to
init dynamic critical region(v2), VFs reuse fw_vram_usage_*
from ttm to store critical region tables in a 5MB chunk.
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Introduced amdgpu_virt_init_critical_region during VF init.
- VFs use init_data_header_offset and init_data_header_size_kb
transmitted via PF2VF mailbox to fetch the offset of
critical regions' offsets/sizes in VRAM and save to
adev->virt.crit_region_offsets and adev->virt.crit_region_sizes_kb.
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Added enum amd_sriov_crit_region_version to support multi versions
2. Added logic in SRIOV mailbox to regonize crit_region version during
req_gpu_init_data
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
suffix
- This change prepares the later patches to intro _v2 suffix to SRIOV critical regions
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Query bad page info of ras module.
V2:
Update code to reuse bad page output code.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ras module supports error injection.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update function and remove redundant code:
1. Update function to prepare for internal use.
2. Remove unused function code previously prepared
for ioctl.
V2:
Update commit message content.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
According to the actual usage of this structure,
it is more appropriate to call it context, the
structure name with ioctl is easy to cause
misunderstanding.
V2:
Update commit message content.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along following update:
-Fix GFP_ATOMIC abuse
-Fix several checkpatch issues
-Set DCN32 to use update planes and stream version 3
-Write segment pointer with mot enabled for MST
-Control BW allocation in FW side
-Change clean dsc blocks condition in accelerated mode
-Check disable_fec flag before enabling FEC
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some mst branches NAK's segment pointer writes with mot disabled.
So reset of segment pointer to 0 should be performed with mot enabled.
[How]
Write segment pointer of mst branch devices with mot enabled.
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The BW allocation feature should be controlled in FW side.
[How]
Pass the control bit to FW boot option.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
Addresses various checkpatch issues related to the HWSS block sequence
function change.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
On system resume from S4 with the lid closed,
DSC was not cleared because DPMS was already off.
[How]
In accelerated mode, to clean up DSC blocks if eDP dpms off is true
to align the DSC and dpms state when we are not in fast boot and
seamless boot.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Old minimal transition does not always wait for updates to complete
before proceeding, which can lead to corruption in multi display
scenarios for DCN32.
[How]
Set DCN32 to use update_planes_and_stream_v3 for better pipe transition
handling.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Carbones <Nicholas.Carbones@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
dc debug option disable_fec was not working.
[How]
Check dc debug option disable_fec flag before
enabling fec in dp_should_enable_fec().
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|