| Age | Commit message (Collapse) | Author |
|---|
|
Commit d7a6797e0bc1 ("powerpc: add exit_flags field in pt_regs") added
the exit_flags field to struct pt_regs to pass internal exit control
flags (e.g. _TIF_RESTOREALL) from syscall_exit_prepare() to the
low-level assembly exit path.
However, the field was placed in a way that was visible to userspace
tools such as strace via PTRACE_GETREGS, or caused a struct layout or
size regression observable through ptrace. The field is purely
kernel-internal and must not be exposed beyond the user_pt_regs
boundary.
Move exit_flags into struct thread_info where it is only accessible to
the kernel, and keep it out of the ptrace-visible register window
entirely.
Fixes: d7a6797e0bc1 ("powerpc: add exit_flags field in pt_regs")
Reported-by: Dmitry V. Levin <ldv@strace.io>
Closes: https://lore.kernel.org/all/20260722070155.GA11808@strace.io/
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260723194809.4046600-1-mkchauras@gmail.com
|
|
When using device tree CPU features (dt-cpu-ftrs), the kernel bypasses
the traditional cputable-based CPU identification and instead derives
CPU features from the device tree's "ibm,powerpc-cpu-features" node
provided by firmware.
However, CPU_FTR_P11_PVR is a kernel-internal feature flag used to
identify Power11 and later processors, and is not represented in the
device tree's ISA feature set. While ISA v3.1 support (indicated by
CPU_FTR_ARCH_31) is present on both Power10 and Power11, the
CPU_FTR_P11_PVR flag is specifically needed by code that must
distinguish between Power10 and Power11 processors.
Without this flag set, code that checks for Power11 using
cpu_has_feature(CPU_FTR_P11_PVR) will incorrectly return false on
Power11+ systems using dt-cpu-ftrs, leading to incorrect behavior.
This issue manifests specifically in powernv environments (bare-metal
or QEMU TCG with powernv machine type), where skiboot/OPAL firmware
provides the "ibm,powerpc-cpu-features" node, causing the kernel to
use dt-cpu-ftrs. The issue does not affect pseries guests, where SLOF
firmware does not provide this node, causing the kernel to fall back
to the traditional cputable path (identify_cpu) which correctly sets
CPU_FTR_P11_PVR during PVR-based CPU identification.
In powernv TCG guests, the missing flag causes KVM code to trigger
warnings when attempting to create KVM guests, as cpu_features shows
0x000c00eb8f4fb187 (missing bit 53) instead of the correct
0x002c00eb8f4fb187 (with bit 53 set).
Fix this by setting CPU_FTR_P11_PVR for all processors with
PVR >= PVR_POWER11 when ISA v3.1 support is detected in
cpufeatures_setup_start(). This approach ensures forward
compatibility with future processor generations.
Fixes: 96e266e3bcd6 ("KVM: PPC: Book3S HV: Add Power11 capability support for Nested PAPR guests")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260614173437.26352-1-amachhiw@linux.ibm.com
|
|
It was observed that /proc/stat had very large value for one ore more
CPUs. It was more visible after recent code simplifications around
cpustats.
System has 240 CPUs.
cat /proc/uptime;
194.18 46500.55
cat /proc/stat
cpu 5966 39 837032887 4650070 164 185 100 0 0 0
cpu0 108 0 837030890 19109 24 4 23 0 0 0
Since uptime is 194s, system time of each CPU can't be more than 19400.
Sum of system time of all CPUs can't be more than 19400*240 4656000.
In fact huge value is close to mftb(). Note mftb doesn't reset on powerVM
when the LPAR restart. It only resets when whole system resets. The same
issue exists for kexec too.
This happens since starttime is not setup at init time. Once it is set
then subsequent vtime_delta will return the right delta.
Fix it by initializing the starttime during CPU initialization. This
fixes the large times seen.
cat /proc/uptime; cat /proc/stat
15.78 3694.63
cpu 6035 35 1347 369479 23 144 49 0 0 0
cpu0 19 0 38 1508 0 1 14 0 0 0
Now, system time is reported as expected.
Fixes: cf9efce0ce31 ("powerpc: Account time using timebase rather than PURR")
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260605124329.377533-1-sshegde@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
|
|
pci_sriov_resource_alignment() inputs struct pci_dev which it should not
need to alter to calculate alignment.
Make pci_dev pci_sriov_resource_alignment() inputs const. It requires
making pci_iov_resource_size() input const as well.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-8-ilpo.jarvinen@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Enable GENERIC_ENTRY feature
- Add missing property in DTS for mpc83xx platform
- Enable building of DTB based on platfrom Kconfig
- Add powerpc64 JIT support for timed may_goto
- Add timeout to RTAS busy-wait loops
- Simplify cpumask api usage for cpuinfo display
- implement get_direction() in cpm1 (8xx platform)
- MAINTAINERS file update for power VMX AES entries
- Fixes to handle preempt count
- Restore KUAP registers on syscall restart exit
- define MIN_RMA in bytes rather than MB
- misc fixes and cleanups
Thanks to Aboorva Devarajan, Adriano Vero, Amit Machhiwal, Anushree
Mathur, Bartosz Golaszewski, Christophe Leroy (CS GROUP), David Gow,
Jinjie Ruan, J. Neuschäfer, Linus Walleij, Mahesh Salgaonkar, Mukesh
Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Saket Kumar Bhaskar,
Samir M, Sayali Patil, Shirisha G, Shivang Upadhyay, Shrikanth Hegde,
Sourabh Jain, Thorsten Blum, Venkat Rao Bagalkote, and Yury Norov.
* tag 'powerpc-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (32 commits)
powerpc/fadump: define MIN_RMA in bytes rather than MB
powerpc: Restore KUAP registers on syscall restart exit
powerpc/kexec: fix double get_cpu() imbalance in kexec_prepare_cpus
powerpc/powernv: fix preempt count leak in pnv_kexec_wait_secondaries_down
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
powerpc/boot: Allow text relocations for pseries wrapper with binutils 2.46+
powerpc: Simplify access_ok()
powerpc/entry: Disable interrupts before irqentry_exit
powerpc/8xx: implement get_direction() in cpm1
powerpc/pseries/lparcfg: Replace deprecated strcpy in parse_system_parameter_string
powerpc: Fix indentation and replace typedef with struct name
powerpc/rtas: Replace one-element array with flexible array member
powerpc: use sysfs_emit{_at} in sysfs show functions
MAINTAINERS: powerpc: update VMX AES entries
ppc/fadump: invoke kmsg_dump in fadump panic path
powerpc/xive: Add warning if target CPU not found
powerpc/perf: Use cpumask_intersects api for checking disable path
powerpc: Simplify cpumask api usage for cpuinfo display
powerpc: Use cpumask_next_wrap instead
powerpc/fadump: Add timeout to RTAS busy-wait loops
...
|
|
The MIN_RMA size checks in fadump_setup_param_area() use
(MIN_RMA * 1024 * 1024), which is evaluated in int and can
overflow when MIN_RMA is increased to values such as SZ_2G,
triggering compiler warnings such as:
warning: integer overflow in expression of type 'int'
results in '0' [-Woverflow]
Define MIN_RMA directly in bytes using SZ_1M and update the
callers accordingly. This avoids repeated unit conversions and
prevents integer overflow.
Also convert MIN_RMA back to MB when populating the firmware
architecture vector, since firmware expects the value in MB.
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/310b040acef712fdc79e3e37d0f4c2213938b556.1781589284.git.sayalip@linux.ibm.com
|
|
During a syscall restart, block KUAP so that pending interrupts can be
replayed. The original KUAP state is not restored before returning to
userspace, causing subsequent userspace accesses to fault and eventually
trigger bad_access_pkey(), crashing the kernel.
The original KUAP register values are already saved in
arch_enter_from_user_mode(). Restore them on the syscall restart exit
path before returning to userspace.
Fixes: bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature")
Reported-by: Sayali Patil <sayalip@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/fcd11556-27ac-4cd7-8c77-50716dec6985@linux.ibm.com/
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Tested-by: Sayali Patil <sayalip@linux.ibm.com>
[Maddy: Added Closes tag]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260615162617.2861795-1-mkchauras@gmail.com
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull NOHZ updates from Thomas Gleixner:
- Fix a long standing TOCTOU in get_cpu_sleep_time_us()
- Make the CPU offline NOHZ handling more robust by disabling NOHZ on
the outgoing CPU early instead of creating unneeded state which needs
to be undone.
- Unify idle CPU time accounting instead of having two different
accounting mechanisms. These two different mechanisms are not really
independent, but the different properties can in the worst case cause
that gloabl idle time can be observed going backwards.
- Consolidate the idle/iowait time retrieval interfaces instead of
converting back and forth between them.
- Make idle interrupt time accounting more robust. The original code
assumes that interrupt time accouting is enabled and therefore stops
elapsing idle time while an interrupt is handled in NOHZ dyntick
state. That assumption is not correct as interrupt time accounting
can be disabled at compile and runtime.
- Fix an accounting error between dyntick idle time and dyntick idle
steal time. The stolen time is not accounted and therefore idle time
becomes inaccurate. The stolen time is now accounted after the fact
as there is no way to predict the steal time upfront.
* tag 'timers-nohz-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Handle dyntick-idle steal time correctly
sched/cputime: Handle idle irqtime gracefully
sched/cputime: Provide get_cpu_[idle|iowait]_time_us() off-case
tick/sched: Consolidate idle time fetching APIs
tick/sched: Account tickless idle cputime only when tick is stopped
tick/sched: Remove unused fields
tick/sched: Move dyntick-idle cputime accounting to cputime code
tick/sched: Remove nohz disabled special case in cputime fetch
tick/sched: Unify idle cputime accounting
s390/time: Prepare to stop elapsing in dynticks-idle
powerpc/time: Prepare to stop elapsing in dynticks-idle
sched/cputime: Correctly support generic vtime idle time
sched/cputime: Remove superfluous and error prone kcpustat_field() parameter
sched/idle: Handle offlining first in idle loop
tick/sched: Fix TOCTOU in nohz idle time fetch
|
|
Currently the tick subsystem stores the idle cputime accounting in
private fields, allowing cohabitation with architecture idle vtime
accounting. The former is fetched on online CPUs, the latter on offline
CPUs.
For consolidation purpose, architecture vtime accounting will continue
to account the cputime but will make a break when the idle tick is
stopped. The dyntick cputime accounting will then be relayed by the tick
subsystem so that the idle cputime is still seen advancing coherently
even when the tick isn't there to flush the idle vtime.
Prepare for that and introduce three new APIs which will be used in
subsequent patches:
- vtime_dynticks_start() is deemed to be called when idle enters in
dyntick mode. The idle cputime that elapsed so far is accumulated.
- vtime_dynticks_stop() is deemed to be called when idle exits from
dyntick mode. The vtime entry clocks are fast-forward to current time
so that idle accounting restarts elapsing from now.
- vtime_reset() is deemed to be called from dynticks idle IRQ entry to
fast-forward the clock to current time so that the IRQ time is still
accounted by vtime while nohz cputime is paused.
Also accumulated vtime won't be flushed from dyntick-idle ticks to avoid
accounting twice the idle cputime, along with nohz accounting.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260508131647.43868-6-frederic@kernel.org
|
|
Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show
functions, which are preferred for formatting sysfs output because they
provide safer bounds checking.
While the current code only emits strings that fit easily within
PAGE_SIZE, use sysfs_emit() and sysfs_emit_at() to follow secure coding
best practices.
This is a mechanical cleanup with a few simple edge cases:
- In domains_show(), drop the redundant n < 0 check since neither
sprintf() nor sysfs_emit() return negative values.
- In powercap_show() and psr_show(), also drop the dead ret < 0 checks.
- In ps3_fw_version_show(), normalize the output by adding a terminating
newline as suggested by checkpatch.
- In vio's modalias_show(), replace the deprecated strcpy() [1] followed
by strlen() with sysfs_emit().
Leave validate_show() and the variable-length hv-gpci helpers unchanged
since they already have explicit bounds handling, and converting those
would be more than a mechanical conversion.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260524130002.793476-2-thorsten.blum@linux.dev
|
|
fadump is registered in panic_notifier_list and gets triggered before
kmsg_dump_desc() in the panic path. As a result, kmsg_dumpers such as
pstore are not executed during fadump crashes.
This is problematic because pstore provides a critical fallback mechanism
for crash analysis. When fadump fails to successfully reboot the system
or capture a dump, pstore logs may be the only available information from
the crashed kernel. Without invoking kmsg_dump_desc() in the fadump path,
we lose this valuable diagnostic data.
Invoke kmsg_dump_desc() from the fadump panic handler, but only when
fadump is actually registered (checked via should_fadump_crash()). This
ensures kmsg_dumpers are called without duplicating the call that occurs
later in panic() when fadump is not active.
The call is placed before crash_fadump() to ensure logs are captured
before the system attempts to trigger the firmware-assisted dump.
Reported-by: Shirisha G <shirisha@linux.ibm.com>
Suggested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Shivang Upadhyay <shivangu@linux.ibm.com>
Tested-by: Shirisha G <shirisha@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260412113057.46090-1-shivangu@linux.ibm.com
|
|
- cpumask_next can take -1 as valid argument. So simplify cpuinfo
iterator.
- Use cpumask_last to find if this_cpu is last online CPU.
/proc/cpuinfo shows same info with patch.
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Yury Norov <ynorov@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427044715.559137-3-sshegde@linux.ibm.com
|
|
cpu = cpumask_next(cpu, mask)
if (cpu >= nr_cpu_ids)
cpu = cpumask_first(mask)
Above block is identical to:
cpu = cpumask_next_wrap(cpu, mask)
Replace it, No change in functionality or performance.
Slightly simpler code.
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Yury Norov <ynorov@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427044715.559137-2-sshegde@linux.ibm.com
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
After enabling GENERIC_ENTRY some functions are left unused.
Cleanup all those functions which includes:
- do_syscall_trace_enter
- do_syscall_trace_leave
- do_notify_resume
- do_seccomp
Signed-off-by: Mukesh Kumar Chaurasiya <mkchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-9-mkchauras@gmail.com
|
|
Enable the generic IRQ entry/exit infrastructure on PowerPC by selecting
GENERIC_ENTRY and integrating the architecture-specific interrupt and
syscall handlers with the generic entry/exit APIs.
This change replaces PowerPC’s local interrupt entry/exit handling with
calls to the generic irqentry_* helpers, aligning the architecture with
the common kernel entry model. The macros that define interrupt, async,
and NMI handlers are updated to use irqentry_enter()/irqentry_exit()
and irqentry_nmi_enter()/irqentry_nmi_exit() where applicable also
convert the PowerPC syscall entry and exit paths to use the generic
entry/exit framework and integrating with the common syscall handling
routines.
Key updates include:
- The architecture now selects GENERIC_ENTRY in Kconfig.
- Replace interrupt_enter/exit_prepare() with arch_interrupt_* helpers.
- Integrate irqentry_enter()/exit() in standard and async interrupt paths.
- Integrate irqentry_nmi_enter()/exit() in NMI handlers.
- Remove redundant irq_enter()/irq_exit() calls now handled generically.
- Use irqentry_exit_cond_resched() for preemption checks.
- interrupt.c and syscall.c are simplified to delegate context
management and user exit handling to the generic entry path.
- The new pt_regs field `exit_flags` introduced earlier is now used
to carry per-syscall exit state flags (e.g. _TIF_RESTOREALL).
- Remove unused code.
This change establishes the necessary wiring for PowerPC to use the
generic IRQ entry/exit framework while maintaining existing semantics.
This aligns PowerPC with the common entry code used by other
architectures and reduces duplicated logic around syscall tracing,
context tracking, and signal handling.
The performance benchmarks from perf bench basic syscall are below:
perf bench syscall usec/op (-ve is improvement)
| Syscall | Base | test | change % |
| ------- | ----------- | ----------- | -------- |
| basic | 0.093543 | 0.093023 | -0.56 |
| execve | 446.557781 | 450.107172 | +0.79 |
| fork | 1142.204391 | 1156.377214 | +1.24 |
| getpgid | 0.097666 | 0.092677 | -5.11 |
perf bench syscall ops/sec (+ve is improvement)
| Syscall | Base | New | change % |
| ------- | -------- | -------- | -------- |
| basic | 10690548 | 10750140 | +0.56 |
| execve | 2239 | 2221 | -0.80 |
| fork | 875 | 864 | -1.26 |
| getpgid | 10239026 | 10790324 | +5.38 |
IPI latency benchmark (-ve is improvement)
| Metric | Base (ns) | New (ns) | % Change |
| -------------- | ------------- | ------------- | -------- |
| Dry run | 583136.56 | 584136.35 | 0.17% |
| Self IPI | 4167393.42 | 4149093.90 | -0.44% |
| Normal IPI | 61769347.82 | 61753728.39 | -0.03% |
| Broadcast IPI | 2235584825.02 | 2227521401.45 | -0.36% |
| Broadcast lock | 2164964433.31 | 2125658641.76 | -1.82% |
Thats very close to performance earlier with arch specific handling.
Signed-off-by: Mukesh Kumar Chaurasiya <mkchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-8-mkchauras@gmail.com
|
|
Add a new field `exit_flags` in the pt_regs structure. This field will hold
the flags set during interrupt or syscall execution that are required during
exit to user mode.
Specifically, the `TIF_RESTOREALL` flag, stored in this field, helps the
exit routine determine if any NVGPRs were modified and need to be restored
before returning to userspace.
This addition ensures a clean and architecture-specific mechanism to track
per-syscall or per-interrupt state transitions related to register restore.
Changes:
- Add `exit_flags` and `__pt_regs_pad` to maintain 16-byte stack alignment
- Update asm-offsets.c and ptrace.c for offset and validation
- Update PT_* constants in uapi header to reflect the new layout
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-6-mkchauras@gmail.com
|
|
Rename arch_irq_disabled_regs() to regs_irqs_disabled() to align with the
naming used in the generic irqentry framework. This makes the function
available for use both in the PowerPC architecture code and in the
common entry/exit paths shared with other architectures.
This is a preparatory change for enabling the generic irqentry framework
on PowerPC.
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-2-mkchauras@gmail.com
|
|
arch_irq_work_raise()
A kernel panic is observed when handling machine check exceptions from
real mode.
BUG: Unable to handle kernel data access on read at 0xc00000006be21300
Oops: Kernel access of bad area, sig: 11 [#1]
MSR: 8000000000001003 <SF,ME,RI,LE> CR: 88222248 XER: 00000005
CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0
NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70
LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150
Call Trace:
[c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150
[c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0
The crash occurs because arch_irq_work_raise() calls preempt_disable()
from machine check exception (MCE) handlers running in real mode. In
this context, accessing the preempt_count can fault, leading to the panic.
The preempt_disable()/preempt_enable() pair in arch_irq_work_raise()
was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix
oops due to perf_event_do_pending call") to avoid races while raising
irq work from exception context.
Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when
queueing work on the local CPU") added preemption protection in
irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per
cpu atomics instead of regular atomics") added equivalent
protection in irq_work_queue_on() before reaching arch_irq_work_raise():
irq_work_queue() / irq_work_queue_on()
-> preempt_disable()
-> __irq_work_queue_local()
-> irq_work_raise()
-> arch_irq_work_raise()
As a result, callers other than mce_irq_work_raise() already execute
with preemption disabled, making the additional
preempt_disable()/preempt_enable() pair in arch_irq_work_raise()
redundant.
The arch_irq_work_raise() function executes in NMI context when called
from MCE handler. Hence we will not be preempted or scheduled out since
we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove
the preempt_disable()/preempt_enable() calls from here.
Remove it to avoid accessing preempt_count from real mode context.
Fixes: cc15ff327569 ("powerpc/mce: Avoid using irq_work_queue() in realmode")
Suggested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
[Maddy: Fixed the commit title]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260513081413.222490-1-sayalip@linux.ibm.com
|
|
with clang
After commit 73cdf24e81e4 ("powerpc64: make clang cross-build
friendly"), building 64-bit little endian + CONFIG_COMPAT=y with clang
results in many warnings along the lines of:
$ cat arch/powerpc/configs/compat.config
CONFIG_COMPAT=y
$ make -skj"$(nproc)" ARCH=powerpc LLVM=1 ppc64le_defconfig compat.config arch/powerpc/kernel/vdso/
...
In file included from <built-in>:4:
In file included from lib/vdso/gettimeofday.c:6:
In file included from include/vdso/datapage.h:15:
In file included from include/vdso/cache.h:5:
arch/powerpc/include/asm/cache.h:77:8: warning: unknown attribute 'patchable_function_entry' ignored [-Wunknown-attributes]
77 | static inline u32 l1_icache_bytes(void)
| ^~~~~~
include/linux/compiler_types.h:235:58: note: expanded from macro 'inline'
235 | #define inline inline __gnu_inline __inline_maybe_unused notrace
| ^~~~~~~
include/linux/compiler_types.h:215:34: note: expanded from macro 'notrace'
215 | #define notrace __attribute__((patchable_function_entry(0, 0)))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
arch/powerpc/Makefile adds -DCC_USING_PATCHABLE_FUNCTION_ENTRY to
KBUILD_CPPFLAGS, which is inherited by the 32-bit vDSO. However, the
32-bit little endian target does not support
'-fpatchable-function-entry', resulting in the warnings above.
Remove -DCC_USING_PATCHABLE_FUNCTION_ENTRY from the 32-bit vDSO flags
when building with clang to avoid the warnings.
Fixes: 73cdf24e81e4 ("powerpc64: make clang cross-build friendly")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260311-ppc-vdso-drop-cc-using-pfe-define-clang-v1-1-66c790e22650@kernel.org
|
|
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "dma_ops_bypass" over to the "flags"
field so modifications are safe.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.5.If62b84471ef2c85e7ad250f0468867d6dba965ab@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- improve debuggability of reserve_mem kernel parameter handling with
print outs in case of a failure and debugfs info showing what was
actually reserved
- Make memblock_free_late() and free_reserved_area() use the same core
logic for freeing the memory to buddy and ensure it takes care of
updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.
* tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/alternative: delay freeing of smp_locks section
memblock: warn when freeing reserved memory before memory map is initialized
memblock, treewide: make memblock_free() handle late freeing
memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y
memblock: extract page freeing from free_reserved_area() into a helper
memblock: make free_reserved_area() more robust
mm: move free_reserved_area() to mm/memblock.c
powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact()
powerpc: fadump: pair alloc_pages_exact() with free_pages_exact()
memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name()
memblock: move reserve_bootmem_range() to memblock.c and make it static
memblock: Add reserve_mem debugfs info
memblock: Print out errors on reserve_mem parser
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"There are two main changes, one feature removal, some code cleanup,
and a number of bug fixes.
Main changes:
- Detecting secure boot mode was limited to IMA. Make detecting
secure boot mode accessible to EVM and other LSMs
- IMA sigv3 support was limited to fsverity. Add IMA sigv3 support
for IMA regular file hashes and EVM portable signatures
Remove:
- Remove IMA support for asychronous hash calculation originally
added for hardware acceleration
Cleanup:
- Remove unnecessary Kconfig CONFIG_MODULE_SIG and CONFIG_KEXEC_SIG
tests
- Add descriptions of the IMA atomic flags
Bug fixes:
- Like IMA, properly limit EVM "fix" mode
- Define and call evm_fix_hmac() to update security.evm
- Fallback to using i_version to detect file change for filesystems
that do not support STATX_CHANGE_COOKIE
- Address missing kernel support for configured (new) TPM hash
algorithms
- Add missing crypto_shash_final() return value"
* tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
evm: Enforce signatures version 3 with new EVM policy 'bit 3'
integrity: Allow sigv3 verification on EVM_XATTR_PORTABLE_DIGSIG
ima: add support to require IMA sigv3 signatures
ima: add regular file data hash signature version 3 support
ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures
ima: remove buggy support for asynchronous hashes
integrity: Eliminate weak definition of arch_get_secureboot()
ima: Add code comments to explain IMA iint cache atomic_flags
ima_fs: Correctly create securityfs files for unsupported hash algos
ima: check return value of crypto_shash_final() in boot aggregate
ima: Define and use a digest_size field in the ima_algo_desc structure
powerpc/ima: Drop unnecessary check for CONFIG_MODULE_SIG
ima: efi: Drop unnecessary check for CONFIG_MODULE_SIG/CONFIG_KEXEC_SIG
ima: fallback to using i_version to detect file change
evm: fix security.evm for a file with IMA signature
s390: Drop unnecessary CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
evm: Don't enable fix mode when secure boot is enabled
integrity: Make arch_ima_get_secureboot integrity-wide
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for huge pfnmaps
- Cleanups to use masked user access
- Rework pnv_ioda_pick_m64_pe() to use better bitmap API
- Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
- Backup region offset update to eflcorehdr
- Fixes for wii/ps3 platform
- Implement JIT support for private stack in powerpc
- Implement JIT support for fsession in powerpc64 trampoline
- Add support for instruction array and indirect jump in powerpc
- Misc selftest fixes and cleanups
Thanks to Abhishek Dubey, Aditya Gupta, Alex Williamson, Amit Machhiwal,
Andrew Donnellan, Bartosz Golaszewski, Cédric Le Goater, Chen Ni,
Christophe Leroy (CS GROUP), Hari Bathini, J. Neuschäfer, Mukesh Kumar
Chaurasiya (IBM), Nam Cao, Nilay Shroff, Pavithra Prakash, Randy Dunlap,
Ritesh Harjani (IBM), Shrikanth Hegde, Sourabh Jain, Vaibhav Jain,
Venkat Rao Bagalkote, and Yury Norov (NVIDIA)
* tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (47 commits)
mailmap: Add entry for Andrew Donnellan
powerpc32/bpf: fix loading fsession func metadata using PPC_LI32
selftest/bpf: Enable gotox tests for powerpc64
powerpc64/bpf: Add support for indirect jump
selftest/bpf: Enable instruction array test for powerpc
powerpc/bpf: Add support for instruction array
powerpc32/bpf: Add fsession support
powerpc64/bpf: Implement fsession support
selftests/bpf: Enable private stack tests for powerpc64
powerpc64/bpf: Implement JIT support for private stack
powerpc: pci-ioda: Optimize pnv_ioda_pick_m64_pe()
powerpc: pci-ioda: use bitmap_alloc() in pnv_ioda_pick_m64_pe()
powerpc/net: Inline checksum wrappers and convert to scoped user access
powerpc/sstep: Convert to scoped user access
powerpc/align: Convert emulate_spe() to scoped user access
powerpc/ptrace: Convert gpr32_set_common_user() to scoped user access
powerpc/futex: Use masked user access
powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
cpuidle: powerpc: avoid double clear when breaking snooze
powerpc/ps3: spu.c: fix enum and Return kernel-doc warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner:
- Make the handling of compat functions consistent and more robust
- Rework the underlying data store so that it is dynamically allocated,
which allows the conversion of the last holdout SPARC64 to the
generic VDSO implementation
- Rework the SPARC64 VDSO to utilize the generic implementation
- Mop up the left overs of the non-generic VDSO support in the core
code
- Expand the VDSO selftest and make them more robust
- Allow time namespaces to be enabled independently of the generic VDSO
support, which was not possible before due to SPARC64 not using it
- Various cleanups and improvements in the related code
* tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
timens: Use task_lock guard in timens_get*()
timens: Use mutex guard in proc_timens_set_offset()
timens: Simplify some calls to put_time_ns()
timens: Add a __free() wrapper for put_time_ns()
timens: Remove dependency on the vDSO
vdso/timens: Move functions to new file
selftests: vDSO: vdso_test_correctness: Add a test for time()
selftests: vDSO: vdso_test_correctness: Use facilities from parse_vdso.c
selftests: vDSO: vdso_test_correctness: Handle different tv_usec types
selftests: vDSO: vdso_test_correctness: Drop SYS_getcpu fallbacks
selftests: vDSO: vdso_test_gettimeofday: Remove nolibc checks
Revert "selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers"
random: vDSO: Remove ifdeffery
random: vDSO: Trim vDSO includes
vdso/datapage: Trim down unnecessary includes
vdso/datapage: Remove inclusion of gettimeofday.h
vdso/helpers: Explicitly include vdso/processor.h
vdso/gettimeofday: Add explicit includes
random: vDSO: Add explicit includes
MIPS: vdso: Explicitly include asm/vdso/vdso.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- randomize_kstack: Improve implementation across arches (Ryan Roberts)
- lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
- refcount: Remove unused __signed_wrap function annotations
* tag 'hardening-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
refcount: Remove unused __signed_wrap function annotations
randomize_kstack: Unify random source across arches
randomize_kstack: Maintain kstack_offset per task
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- coredump: add tracepoint for coredump events
- fs: hide file and bfile caches behind runtime const machinery
Fixes:
- fix architecture-specific compat_ftruncate64 implementations
- dcache: Limit the minimal number of bucket to two
- fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START
- fs/mbcache: cancel shrink work before destroying the cache
- dcache: permit dynamic_dname()s up to NAME_MAX
Cleanups:
- remove or unexport unused fs_context infrastructure
- trivial ->setattr cleanups
- selftests/filesystems: Assume that TIOCGPTPEER is defined
- writeback: fix kernel-doc function name mismatch for wb_put_many()
- autofs: replace manual symlink buffer allocation in autofs_dir_symlink
- init/initramfs.c: trivial fix: FSM -> Finite-state machine
- fs: remove stale and duplicate forward declarations
- readdir: Introduce dirent_size()
- fs: Replace user_access_{begin/end} by scoped user access
- kernel: acct: fix duplicate word in comment
- fs: write a better comment in step_into() concerning .mnt assignment
- fs: attr: fix comment formatting and spelling issues"
* tag 'vfs-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
dcache: permit dynamic_dname()s up to NAME_MAX
fs: attr: fix comment formatting and spelling issues
fs: hide file and bfile caches behind runtime const machinery
fs: write a better comment in step_into() concerning .mnt assignment
proc: rename proc_notify_change to proc_setattr
proc: rename proc_setattr to proc_nochmod_setattr
affs: rename affs_notify_change to affs_setattr
adfs: rename adfs_notify_change to adfs_setattr
hfs: update comments on hfs_inode_setattr
kernel: acct: fix duplicate word in comment
fs: Replace user_access_{begin/end} by scoped user access
readdir: Introduce dirent_size()
coredump: add tracepoint for coredump events
fs: remove do_sys_truncate
fs: pass on FTRUNCATE_* flags to do_truncate
fs: fix archiecture-specific compat_ftruncate64
fs: remove stale and duplicate forward declarations
init/initramfs.c: trivial fix: FSM -> Finite-state machine
autofs: replace manual symlink buffer allocation in autofs_dir_symlink
fs/mbcache: cancel shrink work before destroying the cache
...
|
|
In a PowerNV environment, for devices that supports DMA mask less than
64 bit but larger than 32 bits, iommu is incorrectly bypassing DMA
APIs while allocating and mapping buffers for DMA operations.
Devices are failing with ENOMEN during probe with the following messages
amdgpu 0000:01:00.0: [drm] Detected VRAM RAM=4096M, BAR=4096M
amdgpu 0000:01:00.0: [drm] RAM width 128bits GDDR5
amdgpu 0000:01:00.0: iommu: 64-bit OK but direct DMA is limited by 0
amdgpu 0000:01:00.0: dma_iommu_get_required_mask: returning bypass mask 0xfffffffffffffff
amdgpu 0000:01:00.0: 4096M of VRAM memory ready
amdgpu 0000:01:00.0: 32570M of GTT memory ready.
amdgpu 0000:01:00.0: (-12) failed to allocate kernel bo
amdgpu 0000:01:00.0: [drm] Debug VRAM access will use slowpath MM access
amdgpu 0000:01:00.0: [drm] GART: num cpu pages 4096, num gpu pages 65536
amdgpu 0000:01:00.0: [drm] PCIE GART of 256M enabled (table at 0x000000F4FFF80000).
amdgpu 0000:01:00.0: (-12) failed to allocate kernel bo
amdgpu 0000:01:00.0: (-12) create WB bo failed
amdgpu 0000:01:00.0: amdgpu_device_wb_init failed -12
amdgpu 0000:01:00.0: amdgpu_device_ip_init failed
amdgpu 0000:01:00.0: Fatal error during GPU init
amdgpu 0000:01:00.0: finishing device.
amdgpu 0000:01:00.0: probe with driver amdgpu failed with error -12
amdgpu 0000:01:00.0: ttm finalized
Fixes: 1471c517cf7d ("powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory")
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reported-by: Dan Horák <dan@danny.cz>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5039
Tested-by: Dan Horak <dan@danny.cz>
Closes: https://lore.kernel.org/linuxppc-dev/20260313142351.609bc4c3efe1184f64ca5f44@danny.cz/
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/20260313142351.609bc4c3efe1184f64ca5f44@danny.cz/
[Maddy: Fixed tags]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260331223022.47488-1-gbatra@linux.ibm.com
|
|
fadump allocates buffers with alloc_pages_exact(), but then marks them
as reserved and frees using free_reserved_area().
This is completely unnecessary and the pages allocated with
alloc_pages_exact() can be naturally freed with free_pages_exact().
Replace freeing of memory in fadump_free_buffer() with
free_pages_exact() and simplify allocation code so that it won't mark
allocated pages as reserved.
Link: https://patch.msgid.link/20260323074836.3653702-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Commit 861574d51bbd ("powerpc/uaccess: Implement masked user access")
provides optimised user access by avoiding the cost of access_ok().
Convert emulate_spe() to scoped user access to benefit from masked
user access.
Scoped user access also make the code simpler.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/4ff83cb240da4e2d0c34e2bce4b8b6ef19a33777.1773136880.git.chleroy@kernel.org
|
|
Commit 861574d51bbd ("powerpc/uaccess: Implement masked user access")
provides optimised user access by avoiding the cost of access_ok().
Convert gpr32_set_common_user() to scoped user access to benefit
from masked user access.
Scoped user access also make the code simpler.
Also changes label from Efault to efault to avoid checkpatch
complaining about CamelCase.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2409643daab08b4bc07004c2b88f42085d1ef45a.1773136838.git.chleroy@kernel.org
|
|
Commit e65e1fc2d24b ("[PATCH] syscall class hookup for all normal
targets") added generic support for AUDIT but that didn't include
support for bi-arch like powerpc.
Commit 4b58841149dc ("audit: Add generic compat syscall support")
added generic support for bi-arch.
Convert powerpc to that bi-arch generic audit support.
With this change generated text is similar.
Thomas has confirmed that the previously failing filter_exclude/test
is now successful both without and with this patch, see [1]
[1] https://lore.kernel.org/all/20260306115350-ef265661-6d6b-4043-9bd0-8e6b437d0d67@linutronix.de/
Link: https://github.com/linuxppc/issues/issues/412
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/261b1be5b8dc526b83d73e8281e682a73536ea28.1773155031.git.chleroy@kernel.org
|
|
Remove empty comment line at the beginning of a kernel-doc function
block. Add a "Return:" section for this function.
These changes prevent 2 kernel-doc warnings:
Warning: ../arch/powerpc/kernel/kgdb.c:103 Cannot find identifier on line:
*
Warning: kgdb.c:113 No description found for return value of 'kgdb_skipexception'
Fixes: 949616cf2d30 ("powerpc/kgdb: Bail out of KGDB when we've been triggered")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260225055314.247966-1-rdunlap@infradead.org
|
|
When a bridge window contains big and small resource(s), the small
resource(s) may not amount to the half of the size of the big resource
which would allow calculate_head_align() to shrink the head alignment.
This results in always placing the small resource(s) after the big
resource.
In general, it would be good to be able to place the small resource(s)
before the big resource to achieve better utilization of the address space.
In the cases where the large resource can only fit at the end of the
window, it is even required.
However, carrying the information over from pbus_size_mem() and
calculate_head_align() to __pci_assign_resource() and
pcibios_align_resource() is not easy with the current data structures.
A somewhat hacky way to move the non-aligning tail part to the head is
possible within pcibios_align_resource(). The free space between the start
of the free space span and the aligned start address can be compared with
the non-aligning remainder of the size. If the free space is larger than
the remainder, placing the remainder before the start address is possible.
This relocation should generally work, because PCI resources consist only
power-of-2 atoms.
Various arch requirements may still need to override the relocation, so the
relocation is only applied selectively in such cases.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com
|
|
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
|
|
Previously different architectures were using random sources of
differing strength and cost to decide the random kstack offset. A number
of architectures (loongarch, powerpc, s390, x86) were using their
timestamp counter, at whatever the frequency happened to be. Other
arches (arm64, riscv) were using entropy from the crng via
get_random_u16().
There have been concerns that in some cases the timestamp counters may
be too weak, because they can be easily guessed or influenced by user
space. And get_random_u16() has been shown to be too costly for the
level of protection kstack offset randomization provides.
So let's use a common, architecture-agnostic source of entropy; a
per-cpu prng, seeded at boot-time from the crng. This has a few
benefits:
- We can remove choose_random_kstack_offset(); That was only there to
try to make the timestamp counter value a bit harder to influence
from user space [*].
- The architecture code is simplified. All it has to do now is call
add_random_kstack_offset() in the syscall path.
- The strength of the randomness can be reasoned about independently
of the architecture.
- Arches previously using get_random_u16() now have much faster
syscall paths, see below results.
[*] Additionally, this gets rid of some redundant work on s390 and x86.
Before this patch, those architectures called
choose_random_kstack_offset() under arch_exit_to_user_mode_prepare(),
which is also called for exception returns to userspace which were *not*
syscalls (e.g. regular interrupts). Getting rid of
choose_random_kstack_offset() avoids a small amount of redundant work
for the non-syscall cases.
In some configurations, add_random_kstack_offset() will now call
instrumentable code, so for a couple of arches, I have moved the call a
bit later to the first point where instrumentation is allowed. This
doesn't impact the efficacy of the mechanism.
There have been some claims that a prng may be less strong than the
timestamp counter if not regularly reseeded. But the prng has a period
of about 2^113. So as long as the prng state remains secret, it should
not be possible to guess. If the prng state can be accessed, we have
bigger problems.
Additionally, we are only consuming 6 bits to randomize the stack, so
there are only 64 possible random offsets. I assert that it would be
trivial for an attacker to brute force by repeating their attack and
waiting for the random stack offset to be the desired one. The prng
approach seems entirely proportional to this level of protection.
Performance data are provided below. The baseline is v6.18 with rndstack
on for each respective arch. (I)/(R) indicate statistically significant
improvement/regression. arm64 platform is AWS Graviton3 (m7g.metal).
x86_64 platform is AWS Sapphire Rapids (m7i.24xlarge):
+-----------------+--------------+---------------+---------------+
| Benchmark | Result Class | per-cpu-prng | per-cpu-prng |
| | | arm64 (metal) | x86_64 (VM) |
+=================+==============+===============+===============+
| syscall/getpid | mean (ns) | (I) -9.50% | (I) -17.65% |
| | p99 (ns) | (I) -59.24% | (I) -24.41% |
| | p99.9 (ns) | (I) -59.52% | (I) -28.52% |
+-----------------+--------------+---------------+---------------+
| syscall/getppid | mean (ns) | (I) -9.52% | (I) -19.24% |
| | p99 (ns) | (I) -59.25% | (I) -25.03% |
| | p99.9 (ns) | (I) -59.50% | (I) -28.17% |
+-----------------+--------------+---------------+---------------+
| syscall/invalid | mean (ns) | (I) -10.31% | (I) -18.56% |
| | p99 (ns) | (I) -60.79% | (I) -20.06% |
| | p99.9 (ns) | (I) -61.04% | (I) -25.04% |
+-----------------+--------------+---------------+---------------+
I tested an earlier version of this change on x86 bare metal and it
showed a smaller but still significant improvement. The bare metal
system wasn't available this time around so testing was done in a VM
instance. I'm guessing the cost of rdtsc is higher for VMs.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://patch.msgid.link/20260303150840.3789438-3-ryan.roberts@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The "small" argument to do_sys_ftruncate indicates if > 32-bit size
should be reject, but all the arch-specific compat ftruncate64
implementations get this wrong. Merge do_sys_ftruncate and
ksys_ftruncate, replace the integer as boolean small flag with a
descriptive one about LFS semantics, and use it correctly in the
architecture-specific ftruncate64 implementations.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 3dd681d944f6 ("arm64: 32-bit (compat) applications support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260323070205.2939118-2-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Similar to CPU_FTRS_[POSSIBLE|ALWAYS], let's also print
MMU_FTRS_[POSSIBLE|ALWAYS]. This has some useful data to capture during
bootup.
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/c37a9f314a723048d25aa5424f7ede8eec691d86.1773078178.git.ritesh.list@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KUAP warning in VMX usercopy path
- Fix lockdep warning during PCI enumeration
- Fix to move CMA reservations to arch_mm_preinit
- Fix to check current->mm is alive before getting user callchain
Thanks to Aboorva Devarajan, Christophe Leroy (CS GROUP), Dan Horák,
Nicolin Chen, Nilay Shroff, Qiao Zhao, Ritesh Harjani (IBM), Saket Kumar
Bhaskar, Sayali Patil, Shrikanth Hegde, Venkat Rao Bagalkote, and Viktor
Malik.
* tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: fix lockdep warning during PCI enumeration
powerpc/selftests/copyloops: extend selftest to exercise __copy_tofrom_user_power7_vmx
powerpc: fix KUAP warning in VMX usercopy path
powerpc, perf: Check that current->mm is alive before getting user callchain
powerpc/mem: Move CMA reservations to arch_mm_preinit
|
|
Commit a75b2be249d6 ("iommu: Add iommu_driver_get_domain_for_dev()
helper") introduced iommu_driver_get_domain_for_dev() for driver
code paths that hold iommu_group->mutex while attaching a device
to an IOMMU domain.
The same commit also added a lockdep assertion in
iommu_get_domain_for_dev() to ensure that callers do not hold
iommu_group->mutex when invoking it.
On powerpc platforms, when PCI device ownership is switched from
BLOCKED to the PLATFORM domain, the attach callback
spapr_tce_platform_iommu_attach_dev() still calls
iommu_get_domain_for_dev(). This happens while iommu_group->mutex
is held during domain switching, which triggers the lockdep warning
below during PCI enumeration:
WARNING: drivers/iommu/iommu.c:2252 at iommu_get_domain_for_dev+0x38/0x80, CPU#2: swapper/0/1
Modules linked in:
CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc2+ #35 PREEMPT
Hardware name: IBM,9105-22A Power11 (architected) 0x820200 0xf000007 of:IBM,FW1120.00 (RB1120_115) hv:phyp pSeries
NIP: c000000000c244c4 LR: c00000000005b5a4 CTR: c00000000005b578
REGS: c00000000a7bf280 TRAP: 0700 Not tainted (7.0.0-rc2+)
MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 22004422 XER: 0000000a
CFAR: c000000000c24508 IRQMASK: 0
GPR00: c00000000005b5a4 c00000000a7bf520 c000000001dc8100 0000000000000001
GPR04: c00000000f972f10 0000000000000000 0000000000000000 0000000000000001
GPR08: 0000001ffbc60000 0000000000000001 0000000000000000 0000000000000000
GPR12: c00000000005b578 c000001fffffe480 c000000000011618 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: ffffffffffffefff 0000000000000000 c000000002d30eb0 0000000000000001
GPR24: c0000000017881f8 0000000000000000 0000000000000001 c00000000f972e00
GPR28: c00000000bbba0d0 0000000000000000 c00000000bbba0d0 c00000000f972e00
NIP [c000000000c244c4] iommu_get_domain_for_dev+0x38/0x80
LR [c00000000005b5a4] spapr_tce_platform_iommu_attach_dev+0x2c/0x98
Call Trace:
iommu_get_domain_for_dev+0x68/0x80 (unreliable)
spapr_tce_platform_iommu_attach_dev+0x2c/0x98
__iommu_attach_device+0x44/0x220
__iommu_device_set_domain+0xf4/0x194
__iommu_group_set_domain_internal+0xec/0x228
iommu_setup_default_domain+0x5f4/0x6a4
__iommu_probe_device+0x674/0x724
iommu_probe_device+0x50/0xb4
iommu_add_device+0x48/0x198
pci_dma_dev_setup_pSeriesLP+0x198/0x4f0
pcibios_bus_add_device+0x80/0x464
pci_bus_add_device+0x40/0x100
pci_bus_add_devices+0x54/0xb0
pcibios_init+0xd8/0x140
do_one_initcall+0x8c/0x598
kernel_init_freeable+0x3ec/0x850
kernel_init+0x34/0x270
ret_from_kernel_user_thread+0x14/0x1c
Fix this by using iommu_driver_get_domain_for_dev() instead of
iommu_get_domain_for_dev() in spapr_tce_platform_iommu_attach_dev(),
which is the appropriate helper for callers holding the group mutex.
Cc: stable@vger.kernel.org
Fixes: a75b2be249d6 ("iommu: Add iommu_driver_get_domain_for_dev() helper")
Closes: https://patchwork.ozlabs.org/project/linuxppc-dev/patch/d5c834ff-4c95-44dd-8bef-57242d63aeee@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
[Maddy: Added Closes, tested and reviewed by tags]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260310082129.3630996-1-nilay@linux.ibm.com
|
|
commit 4267739cabb8 ("arch, mm: consolidate initialization of SPARSE memory model"),
changed the initialization order of "pageblock_order" from...
start_kernel()
- setup_arch()
- initmem_init()
- sparse_init()
- set_pageblock_order(); // this sets the pageblock_order
- xxx_cma_reserve();
to...
start_kernel()
- setup_arch()
- xxx_cma_reserve();
- mm_core_init_early()
- free_area_init()
- sparse_init()
- set_pageblock_order() // this sets the pageblock_order.
So this means, pageblock_order is not initialized before these cma
reservation function calls, hence we are seeing CMA failures like...
[ 0.000000] kvm_cma_reserve: reserving 3276 MiB for global area
[ 0.000000] cma: pageblock_order not yet initialized. Called during early boot?
[ 0.000000] cma: Failed to reserve 3276 MiB
....
[ 0.000000][ T0] cma: pageblock_order not yet initialized. Called during early boot?
[ 0.000000][ T0] cma: Failed to reserve 1024 MiB
This patch moves these CMA reservations to arch_mm_preinit() which
happens in mm_core_init() (which happens after pageblock_order is
initialized), but before the memblock moves the free memory to buddy.
Fixes: 4267739cabb8 ("arch, mm: consolidate initialization of SPARSE memory model")
Suggested-by: Mike Rapoport <rppt@kernel.org>
Reported-and-tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/4c338a29-d190-44f3-8874-6cfa0a031f0b@linux.ibm.com/
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Tested-by: Dan Horák <dan@danny.cz>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/6e532cf0db5be99afbe20eed699163d5e86cd71f.1772303986.git.ritesh.list@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Correct MSI allocation tracking
- Always use 64 bits PTE for powerpc/e500
- Fix inline assembly for clang build on PPC32
- Fixes for clang build issues in powerpc64/ftrace
- Fixes for powerpc64/bpf JIT and tailcall support
- Cleanup MPC83XX devicetrees
- Fix keymile vendor prefix
- Fix to use big-endian types for crash variables
Thanks to Abhishek Dubey, Christophe Leroy (CS GROUP), Hari Bathini,
Heiko Schocher, J. Neuschäfer, Mahesh Salgaonkar, Nam Cao, Nilay Shroff,
Rob Herring (Arm), Saket Kumar Bhaskar, Sourabh Jain, Stan Johnson, and
Venkat Rao Bagalkote.
* tag 'powerpc-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits)
powerpc/pseries: Correct MSI allocation tracking
powerpc: dts: mpc83xx: Add unit addresses to /memory
powerpc: dts: mpc8315erdb: Add missing #cells properties to SPI bus
powerpc: dts: mpc8315erdb: Rename LED nodes to comply with schema
powerpc: dts: mpc8315erdb: Use IRQ_TYPE_* macros
powerpc: dts: mpc8313erdb: Use IRQ_TYPE_* macros
powerpc: 83xx: km83xx: Fix keymile vendor prefix
dt-bindings: powerpc: Add Freescale/NXP MPC83xx SoCs
powerpc64/bpf: fix kfunc call support
powerpc64/bpf: fix handling of BPF stack in exception callback
powerpc64/bpf: remove BPF redzone protection in trampoline stack
powerpc64/bpf: use consistent tailcall offset in trampoline
powerpc64/bpf: fix the address returned by bpf_get_func_ip
powerpc64/bpf: do not increment tailcall count when prog is NULL
powerpc64/ftrace: workaround clang recording GEP in __patchable_function_entries
powerpc64/ftrace: fix OOL stub count with clang
powerpc64: make clang cross-build friendly
powerpc/crash: adjust the elfcorehdr size
powerpc/kexec/core: use big-endian types for crash variables
powerpc/prom_init: Fixup missing #size-cells on PowerMac media-bay nodes
...
|
|
This source file undefines '__powerpc64__' to get the 32-bit system call
numbers from asm/unistd.h. However this symbol is also evaluated by
other headers, among them is asm/bitsperlong.h. The undefinition leads
to an inconsistency between __BITS_PER_LONG and the C type 'long'.
An upcoming consistency check will be tripped by this.
Directly include asm/unistd_32.h to get access to the 32-bit system call
numbers instead.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260302-vdso-compat-checkflags-v2-4-78e55baa58ba@linutronix.de
|
|
When CONFIG_MODULE_SIG is disabled set_module_sig_enforced() is defined
as an empty stub, so the check is unnecessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Support for -fpatchable-function-entry on ppc64le was added in Clang
with [1]. However, when no prefix NOPs are specified - as is the case
with CONFIG_PPC_FTRACE_OUT_OF_LINE - the first NOP is emitted at LEP,
but Clang records the Global Entry Point (GEP) unlike GCC which does
record the Local Entry Point (LEP). Issue [2] has been raised to align
Clang's behavior with GCC. As a temporary workaround to ensure ftrace
initialization works as expected with Clang, derive the LEP using
ppc_function_entry() for kernel symbols and by looking for the below
module GEP sequence for module addresses, until [2] is resolved:
ld r2, -8(r12)
add r2, r2, r12
[1] https://github.com/llvm/llvm-project/pull/151569
[2] https://github.com/llvm/llvm-project/issues/163706
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127084926.34497-4-hbathini@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Split out .modinfo section from ELF_DETAILS macro, as that macro may
be used in other areas that expect to discard .modinfo, breaking
certain image layouts
- Adjust genksyms parser to handle optional attributes in certain
declarations, necessary after commit 07919126ecfc ("netfilter:
annotate NAT helper hook pointers with __rcu")
- Include resolve_btfids in external module build created by
scripts/package/install-extmod-build when it may be run on external
modules
- Avoid removing objtool binary with 'make clean', as it is required
for external module builds
* tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Leave objtool binary around with 'make clean'
kbuild: install-extmod-build: Package resolve_btfids if necessary
genksyms: Fix parsing a declarator with a preceding attribute
kbuild: Split .modinfo out from ELF_DETAILS
|
|
EVM and other LSMs need the ability to query the secure boot status of
the system, without directly calling the IMA arch_ima_get_secureboot
function. Refactor the secure boot status check into a general function
named arch_get_secureboot.
Reported-and-suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Similar to other PowerMac mac-io devices, the media-bay node is missing the
"#size-cells" property.
Depends-on: commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling")
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251029174047.1620073-1-robh@kernel.org
|
