summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/core/block.c3
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c91
-rw-r--r--drivers/mmc/host/sdhci-of-dwcmshc.c14
-rw-r--r--drivers/mmc/host/vub300.c26
4 files changed, 85 insertions, 49 deletions
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 6113bb927946..e8e45b161a39 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -2784,7 +2784,6 @@ static void mmc_blk_rpmb_device_release(struct device *dev)
{
struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev);
- rpmb_dev_unregister(rpmb->rdev);
mmc_blk_put(rpmb->md);
ida_free(&mmc_rpmb_ida, rpmb->id);
kfree(rpmb);
@@ -2999,8 +2998,8 @@ out_put_device:
}
static void mmc_blk_remove_rpmb_part(struct mmc_rpmb_data *rpmb)
-
{
+ rpmb_dev_unregister(rpmb->rdev);
cdev_device_del(&rpmb->chrdev, &rpmb->dev);
put_device(&rpmb->dev);
}
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index a7a5df673b0f..aa2a1eeedffa 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1315,19 +1315,21 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
dev_dbg(mmc_dev(host->mmc), "change pinctrl state for uhs %d\n", uhs);
- if (IS_ERR(imx_data->pinctrl) ||
- IS_ERR(imx_data->pins_100mhz) ||
- IS_ERR(imx_data->pins_200mhz))
+ if (IS_ERR(imx_data->pinctrl))
return -EINVAL;
switch (uhs) {
case MMC_TIMING_UHS_SDR50:
case MMC_TIMING_UHS_DDR50:
+ if (IS_ERR(imx_data->pins_100mhz))
+ return -EINVAL;
pinctrl = imx_data->pins_100mhz;
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
case MMC_TIMING_MMC_HS400:
+ if (IS_ERR(imx_data->pins_200mhz))
+ return -EINVAL;
pinctrl = imx_data->pins_200mhz;
break;
default:
@@ -1338,6 +1340,23 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
return pinctrl_select_state(imx_data->pinctrl, pinctrl);
}
+static void esdhc_set_dll_override(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+ struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+ u32 v;
+
+ if (!boarddata->delay_line)
+ return;
+
+ v = boarddata->delay_line << ESDHC_DLL_OVERRIDE_VAL_SHIFT |
+ (1 << ESDHC_DLL_OVERRIDE_EN_SHIFT);
+ if (is_imx53_esdhc(imx_data))
+ v <<= 1;
+ writel(v, host->ioaddr + ESDHC_DLL_CTRL);
+}
+
/*
* For HS400 eMMC, there is a data_strobe line. This signal is generated
* by the device and used for data output and CRC status response output
@@ -1393,7 +1412,6 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
u32 m;
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
- struct esdhc_platform_data *boarddata = &imx_data->boarddata;
/* disable ddr mode and disable HS400 mode */
m = readl(host->ioaddr + ESDHC_MIX_CTRL);
@@ -1414,15 +1432,7 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
m |= ESDHC_MIX_CTRL_DDREN;
writel(m, host->ioaddr + ESDHC_MIX_CTRL);
imx_data->is_ddr = 1;
- if (boarddata->delay_line) {
- u32 v;
- v = boarddata->delay_line <<
- ESDHC_DLL_OVERRIDE_VAL_SHIFT |
- (1 << ESDHC_DLL_OVERRIDE_EN_SHIFT);
- if (is_imx53_esdhc(imx_data))
- v <<= 1;
- writel(v, host->ioaddr + ESDHC_DLL_CTRL);
- }
+ esdhc_set_dll_override(host);
break;
case MMC_TIMING_MMC_HS400:
m |= ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN;
@@ -2028,7 +2038,9 @@ static int sdhci_esdhc_suspend(struct device *dev)
* 2, make sure the pm_runtime_force_resume() in sdhci_esdhc_resume() really
* invoke its ->runtime_resume callback (needs_force_resume = 1).
*/
- pm_runtime_get_sync(dev);
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ return ret;
if ((imx_data->socdata->flags & ESDHC_FLAG_STATE_LOST_IN_LPMODE) &&
(host->tuning_mode != SDHCI_TUNING_MODE_1)) {
@@ -2041,15 +2053,14 @@ static int sdhci_esdhc_suspend(struct device *dev)
* to save the tuning delay value just in case the usdhc
* lost power during system PM.
*/
- if (mmc_card_keep_power(host->mmc) && mmc_card_wake_sdio_irq(host->mmc) &&
- esdhc_is_usdhc(imx_data))
+ if (mmc_card_keep_power(host->mmc) && esdhc_is_usdhc(imx_data))
sdhc_esdhc_tuning_save(host);
+ /* The irqs of imx are not shared. It is safe to disable */
+ disable_irq(host->irq);
+
if (device_may_wakeup(dev)) {
- /* The irqs of imx are not shared. It is safe to disable */
- disable_irq(host->irq);
- ret = sdhci_enable_irq_wakeups(host);
- if (!ret)
+ if (!sdhci_enable_irq_wakeups(host))
dev_warn(dev, "Failed to enable irq wakeup\n");
} else {
/*
@@ -2060,12 +2071,12 @@ static int sdhci_esdhc_suspend(struct device *dev)
* other function like GPIO function to save power in PM,
* which finally block the SDIO wakeup function.
*/
- ret = pinctrl_pm_select_sleep_state(dev);
- if (ret)
- return ret;
+ if (pinctrl_pm_select_sleep_state(dev))
+ dev_warn(dev, "Failed to select sleep pinctrl state\n");
}
- ret = mmc_gpio_set_cd_wake(host->mmc, true);
+ if (mmc_gpio_set_cd_wake(host->mmc, true))
+ dev_warn(dev, "Failed to enable cd wake\n");
/*
* Make sure invoke runtime_suspend to gate off clock.
@@ -2073,7 +2084,7 @@ static int sdhci_esdhc_suspend(struct device *dev)
*/
pm_runtime_force_suspend(dev);
- return ret;
+ return 0;
}
static int sdhci_esdhc_resume(struct device *dev)
@@ -2083,31 +2094,45 @@ static int sdhci_esdhc_resume(struct device *dev)
struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
int ret;
- pm_runtime_force_resume(dev);
+ if (!device_may_wakeup(dev)) {
+ ret = esdhc_change_pinstate(host, host->timing);
+ if (ret)
+ dev_warn(dev, "Failed to restore pinctrl state\n");
+ }
- ret = mmc_gpio_set_cd_wake(host->mmc, false);
+ ret = pm_runtime_force_resume(dev);
if (ret)
return ret;
+ mmc_gpio_set_cd_wake(host->mmc, false);
+
/* re-initialize hw state in case it's lost in low power mode */
sdhci_esdhc_imx_hwinit(host);
- if (host->irq_wake_enabled) {
+ if (host->irq_wake_enabled)
sdhci_disable_irq_wakeups(host);
- enable_irq(host->irq);
- }
+
+ enable_irq(host->irq);
/*
* restore the saved tuning delay value for the device which keep
* power during system PM.
*/
- if (mmc_card_keep_power(host->mmc) && mmc_card_wake_sdio_irq(host->mmc) &&
- esdhc_is_usdhc(imx_data))
+ if (mmc_card_keep_power(host->mmc) && esdhc_is_usdhc(imx_data)) {
sdhc_esdhc_tuning_restore(host);
+ /*
+ * Restore DLL override for DDR modes. hwinit unconditionally
+ * clears ESDHC_DLL_CTRL, but the card is still in DDR mode.
+ */
+ if (host->timing == MMC_TIMING_UHS_DDR50 ||
+ host->timing == MMC_TIMING_MMC_DDR52)
+ esdhc_set_dll_override(host);
+ }
+
pm_runtime_put_autosuspend(dev);
- return ret;
+ return 0;
}
static int sdhci_esdhc_runtime_suspend(struct device *dev)
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 5b7ffc359414..d7ad11a85bff 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -1421,13 +1421,16 @@ static int dwcmshc_probe(struct platform_device *pdev)
return err;
priv->bus_clk = devm_clk_get(dev, "bus");
- if (!IS_ERR(priv->bus_clk))
- clk_prepare_enable(priv->bus_clk);
+ if (!IS_ERR(priv->bus_clk)) {
+ err = clk_prepare_enable(priv->bus_clk);
+ if (err)
+ goto err_clk;
+ }
}
err = mmc_of_parse(host->mmc);
if (err)
- goto err_clk;
+ goto err_bus_clk;
sdhci_get_of_property(pdev);
@@ -1441,7 +1444,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
if (pltfm_data->init) {
err = pltfm_data->init(&pdev->dev, host, priv);
if (err)
- goto err_clk;
+ goto err_bus_clk;
}
#ifdef CONFIG_ACPI
@@ -1487,9 +1490,10 @@ err_setup_host:
err_rpm:
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
+err_bus_clk:
+ clk_disable_unprepare(priv->bus_clk);
err_clk:
clk_disable_unprepare(pltfm_host->clk);
- clk_disable_unprepare(priv->bus_clk);
clk_bulk_disable_unprepare(priv->num_other_clks, priv->other_clks);
return err;
}
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index 3c9df27f9fa7..93c4e145009e 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -1586,7 +1586,7 @@ static int __command_write_data(struct vub300_mmc_host *vub300,
return linear_length;
}
-static void __vub300_command_response(struct vub300_mmc_host *vub300,
+static bool __vub300_command_response(struct vub300_mmc_host *vub300,
struct mmc_command *cmd,
struct mmc_data *data, int data_length)
{
@@ -1598,17 +1598,11 @@ static void __vub300_command_response(struct vub300_mmc_host *vub300,
msecs_to_jiffies(msec_timeout));
if (respretval == 0) { /* TIMED OUT */
/* we don't know which of "out" and "res" if any failed */
- int result;
vub300->usb_timed_out = 1;
usb_kill_urb(vub300->command_out_urb);
usb_kill_urb(vub300->command_res_urb);
cmd->error = -ETIMEDOUT;
- result = usb_lock_device_for_reset(vub300->udev,
- vub300->interface);
- if (result == 0) {
- result = usb_reset_device(vub300->udev);
- usb_unlock_device(vub300->udev);
- }
+ return true;
} else if (respretval < 0) {
/* we don't know which of "out" and "res" if any failed */
usb_kill_urb(vub300->command_out_urb);
@@ -1704,6 +1698,8 @@ static void __vub300_command_response(struct vub300_mmc_host *vub300,
} else {
cmd->error = -EINVAL;
}
+
+ return false;
}
static void construct_request_response(struct vub300_mmc_host *vub300,
@@ -1749,6 +1745,7 @@ static void vub300_cmndwork_thread(struct work_struct *work)
struct mmc_request *req = vub300->req;
struct mmc_command *cmd = vub300->cmd;
struct mmc_data *data = vub300->data;
+ bool reset_device;
int data_length;
mutex_lock(&vub300->cmd_mutex);
init_completion(&vub300->command_complete);
@@ -1771,7 +1768,8 @@ static void vub300_cmndwork_thread(struct work_struct *work)
data_length = __command_read_data(vub300, cmd, data);
else
data_length = __command_write_data(vub300, cmd, data);
- __vub300_command_response(vub300, cmd, data, data_length);
+ reset_device = __vub300_command_response(vub300, cmd,
+ data, data_length);
vub300->req = NULL;
vub300->cmd = NULL;
vub300->data = NULL;
@@ -1779,6 +1777,16 @@ static void vub300_cmndwork_thread(struct work_struct *work)
if (cmd->error == -ENOMEDIUM)
check_vub300_port_status(vub300);
mutex_unlock(&vub300->cmd_mutex);
+ if (reset_device) {
+ int result;
+
+ result = usb_lock_device_for_reset(vub300->udev,
+ vub300->interface);
+ if (result == 0) {
+ result = usb_reset_device(vub300->udev);
+ usb_unlock_device(vub300->udev);
+ }
+ }
mmc_request_done(vub300->mmc, req);
kref_put(&vub300->kref, vub300_delete);
return;