PCI: tegra194: Assert CLKREQ# explicitly by default

The Root Port's CLKREQ# signal is shared with a downstream PCIe switch and
the endpoints behind it. By default, APPL_PINMUX_CLKREQ_OVERRIDE only
overrides the CLKREQ# input to the controller (so REFCLK is enabled
internally); it does not drive the CLKREQ# output pin low. Some PCIe
switches (e.g. Broadcom PCIe Gen4) forward the Root Port's CLKREQ# to their
downstream side and expect it to be driven low for REFCLK, even when the
switch does not support CLK-PM or ASPM-L1SS. Without driving the output
pin low, link-up can fail between the switch and endpoints.

Clear APPL_PINMUX_CLKREQ_DEFAULT_VALUE so the CLKREQ# output pad is
explicitly driven low. That makes the shared CLKREQ# line low on the wire
and avoids link-up issues with such switches.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-2-mmaddireddy@nvidia.com

0 files changed, 0 insertions, 0 deletions