hwmon: (ina2xx) Shift INA234 shunt and current registers

The INA219 has the lowest three bits of the bus voltage register
zero-reserved, the bus_voltage_shift ina2xx_config field was introduced
to accommodate for that.

The INA234 has four bits of the bus voltage, of the shunt voltage, and
of the current registers zero-reserved but the latter two were
implemented by choosing a 16x higher shunt_div instead of a separate
field specifying a bit shift.

This is possible because shunt voltage and current are divided by
shunt_div, hence a 16x higher shunt_div results in a 16x smaller LSB for
both the shunt voltage and the current register, perfectly accounting
for the missing bit shift.

For consistency and correctness, account for the reserved bits via
shunt_voltage_shift and current_shift configuration fields as already
done for voltage registers and use the conversion constants given in the
INA234 datasheet.

Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20260303-ina234-shift-v1-2-318c33ac4480@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

0 files changed, 0 insertions, 0 deletions