Merge v6.18.6linux-rolling-stable

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

12 files changed, 31 insertions, 19 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 68c2e0156a5c..f8303b7e2bd2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -113,6 +113,7 @@
 		ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
+			clocks = <&clk IMX8MP_CLK_ENET_QOS>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
index 88ad422c2760..399230144ce3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
@@ -9,7 +9,7 @@
 #include "imx8mp-tx8p-ml81.dtsi"
 
 / {
-	compatible = "gocontroll,moduline-display", "fsl,imx8mp";
+	compatible = "gocontroll,moduline-display-106", "karo,tx8p-ml81", "fsl,imx8mp";
 	chassis-type = "embedded";
 	hardware = "Moduline Display V1.06";
 	model = "GOcontroll Moduline Display baseboard";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi
index fe8ba16eb40e..761ee046eb72 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi
@@ -47,6 +47,7 @@
 				 <&clk IMX8MP_SYS_PLL2_100M>,
 				 <&clk IMX8MP_SYS_PLL2_50M>;
 	assigned-clock-rates = <266000000>, <100000000>, <50000000>;
+	nvmem-cells = <&eth_mac1>;
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -75,6 +76,10 @@
 	};
 };
 
+&fec {
+	nvmem-cells = <&eth_mac2>;
+};
+
 &gpio1 {
 	gpio-line-names = "SODIMM_152",
 			  "SODIMM_42",
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 9c0b6b8d6459..df99fe88cf4a 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -256,6 +256,7 @@
 		regulator-max-microvolt = <3000000>;
 		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		off-on-delay-us = <4800>;
 	};
 
 	reg_audio: regulator-audio {
@@ -560,7 +561,7 @@
 		compatible = "isil,isl29023";
 		reg = <0x44>;
 		interrupt-parent = <&lsio_gpio4>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	pressure-sensor@60 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index d4856b8590e0..e186c31bfd48 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -171,25 +171,25 @@
 
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dmas = <&edma2 16 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
 	dma-names = "rx","tx";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 6da961eb3fe5..583c5f7a84b5 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -806,7 +806,7 @@
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <3>;
 				#size-cells = <0>;
-				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
 					 <&scmi_clk IMX95_CLK_I3C2SLOW>;
 				clock-names = "pclk", "fast_clk";
 				status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 79daba930ad6..3e41da4d6122 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -185,7 +185,7 @@
 			reset-assert-us = <500000>;
 			reset-deassert-us = <500>;
 			interrupt-parent = <&expander2>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso b/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso
index 173ac60723b6..b4daa674eaa1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso
@@ -14,7 +14,7 @@
 };
 
 &main_pmx0 {
-	gpmc0_pins_default: gpmc0-pins-default {
+	gpmc0_pins_default: gpmc0-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x003c, PIN_INPUT, 0) /* (K19) GPMC0_AD0 */
 			AM62X_IOPAD(0x0040, PIN_INPUT, 0) /* (L19) GPMC0_AD1 */
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso
index 7fc73cfacadb..1176a52d560b 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso
@@ -30,13 +30,10 @@
 				<&main_pktdma 0xc206 15>, /* egress slice 1 */
 				<&main_pktdma 0xc207 15>, /* egress slice 1 */
 				<&main_pktdma 0x4200 15>, /* ingress slice 0 */
-				<&main_pktdma 0x4201 15>, /* ingress slice 1 */
-				<&main_pktdma 0x4202 0>, /* mgmnt rsp slice 0 */
-				<&main_pktdma 0x4203 0>; /* mgmnt rsp slice 1 */
+				<&main_pktdma 0x4201 15>; /* ingress slice 1 */
 		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
 					"tx1-0", "tx1-1", "tx1-2", "tx1-3",
-					"rx0", "rx1",
-					"rxmgm0", "rxmgm1";
+					"rx0", "rx1";
 
 		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
 				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
index 996c42ec4253..bea8efa3e909 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
@@ -20,13 +20,13 @@
 };
 
 &main_pmx0 {
-	main_gpio1_exp_header_gpio_pins_default: main-gpio1-exp-header-gpio-pins-default {
+	main_gpio1_exp_header_gpio_pins_default: main-gpio1-exp-header-gpio-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0220, PIN_INPUT, 7)	/* (D14) SPI1_CS1.GPIO1_48 */
 		>;
 	};
 
-	main_spi1_pins_default: main-spi1-pins-default {
+	main_spi1_pins_default: main-spi1-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0224, PIN_INPUT, 0)	/* (C14) SPI1_CLK */
 			AM64X_IOPAD(0x021C, PIN_OUTPUT, 0)	/* (B14) SPI1_CS0 */
@@ -35,7 +35,7 @@
 		>;
 	};
 
-	main_uart3_pins_default: main-uart3-pins-default {
+	main_uart3_pins_default: main-uart3-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0048, PIN_INPUT, 2)       /* (U20) GPMC0_AD3.UART3_RXD */
 			AM64X_IOPAD(0x004c, PIN_OUTPUT, 2)      /* (U18) GPMC0_AD4.UART3_TXD */
@@ -52,7 +52,7 @@
 &main_spi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_spi1_pins_default>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 	status = "okay";
 };
 
diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h
index 0cde2f473971..eb60c9735553 100644
--- a/arch/arm64/include/asm/suspend.h
+++ b/arch/arm64/include/asm/suspend.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_SUSPEND_H
 #define __ASM_SUSPEND_H
 
-#define NR_CTX_REGS 13
+#define NR_CTX_REGS 14
 #define NR_CALLEE_SAVED_REGS 12
 
 /*
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 86818511962b..17df19647556 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -100,6 +100,10 @@ SYM_FUNC_START(cpu_do_suspend)
 	 * call stack.
 	 */
 	str	x18, [x0, #96]
+alternative_if ARM64_HAS_TCR2
+	mrs	x2, REG_TCR2_EL1
+	str	x2, [x0, #104]
+alternative_else_nop_endif
 	ret
 SYM_FUNC_END(cpu_do_suspend)
 
@@ -134,6 +138,10 @@ SYM_FUNC_START(cpu_do_resume)
 	msr	tcr_el1, x8
 	msr	vbar_el1, x9
 	msr	mdscr_el1, x10
+alternative_if ARM64_HAS_TCR2
+	ldr	x2, [x0, #104]
+	msr	REG_TCR2_EL1, x2
+alternative_else_nop_endif
 
 	msr	sctlr_el1, x12
 	set_this_cpu_offset x13