Merge tag 'soc-arm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socHEADmaster

Pull ARM SoC platform updates from Arnd Bergmann:
 "The 32-bit Arm platforms are a bit more interesting this time: I
  refreshed an earlier series to mark code as deprecated that does have
  the tendency of getting in the way of cleanups and new features but
  has close to zero users. Among these are:

   - 22 of the remaining 28 legacy board files that predate the current
     devicetree based descriptions, using old chips from Intel and
     Marvell. The remaining six board files are for TI OMAP1 and Samsung
     s3c64xx chips and all still have known users.

   - support for Cortex-M3/M4/M7 and ARM1136r0 CPU cores and the 25
     machines based on these. These all use devicetree but the CPU
     support causes disproportional work. Most of them are just
     reference boards, the notable exceptions being the Nokia N800/N810
     tablet and the Buglabs BUG platform.

   - be8, be32, oabi and iwmmxt userspace binaries, which were mostly
     associated with the platforms now scheduled for removal and are
     increasingly problematic to support with modern toolchains.

  Nothing is actually removed at this point, to ensure that any
  remaining users continue to have the 7.3-LTS for a while longer.
  Patches for removal are currently being tested.

  Other updates include a continued work to convert GPIO number based
  interfaces to descriptors, a patch to restore little-endian mode on
  the one Arm platform (ixp4xx) that only worked in big-endian mode
  recently, and some minor cleanups and bugfixes"

* tag 'soc-arm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
  MAINTAINERS: Drop redundant lists from various Samsung entries
  ARM: tegra: Replace __ASSEMBLY__ with __ASSEMBLER__
  ARM: tegra: Fix OF node reference leaks in IRQ init
  ARM: lpc32xx: remove a few manually populated OF devices
  ARM: lpc32xx: only run SoC init on LPC32xx hardware
  firmware: imx: scu: manage mailbox channels and global handle
  ARM: sa1100: h3xxx: convert gpio-keys to use software nodes
  ARM: sa1100: collie: convert gpio-keys to use software nodes
  ARM: sa1100: assabet: convert gpio-keys to use software nodes
  gpio: sa1100: register software node for GPIO controller
  ARM: ixp4xx: Relax endianness
  ARM: replace linux/gpio.h inclusions
  soc: imx9: devm_kasprintf error handling
  ARM: mark mv78xx0 support as deprecated
  ARM: mark axxia platform as deprecated
  ARM: mark Cortex-M3/M4/M7 based boards as deprecated
  ARM: mark footbridge as deprecated
  ARM: mark RiscPC as deprecated
  ARM: mark mach-sa1100 as deprecated
  ARM: orion5x: mark all board files as deprecated
  ...

12 files changed, 19 insertions, 13 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index c478fb8a6f78..2fb29b9ef744 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -55,12 +55,15 @@ if ATAGS
 comment "Legacy board files"
 
 config ARCH_GUMSTIX
-	bool "Gumstix XScale 255 boards"
+	bool "Gumstix XScale 255 boards (DEPRECATED)"
 	select PXA25x
 	help
 	  Say Y here if you intend to run this kernel on
 	  Basix, Connex, ws-200ax, ws-400ax systems
 
+	  Support for this machine will go away in early 2027,
+	  unless it gets converted to device tree.
+
 choice
 	prompt "Gumstix Carrier/Expansion Board"
 	depends on ARCH_GUMSTIX
@@ -74,7 +77,7 @@ config GUMSTIX_AM300EPD
 endchoice
 
 config PXA_SHARPSL
-	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models (DEPRECATED)"
 	select SHARP_PARAM
 	select SHARP_SCOOP
 	help
@@ -84,6 +87,9 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+	  Support for these machines will go away in early 2027,
+	  unless they get converted to device tree.
+
 config PXA_SHARPSL_DETECT_MACH_ID
 	bool "Detect machine ID at run-time in the decompressor"
 	depends on PXA_SHARPSL
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index cac0bb09db14..4814f3cfe775 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -28,7 +28,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 
 #include "pxa25x.h"
 #include "gumstix.h"
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 4b55bc89db8f..435fb72da7de 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 
 #include "gumstix.h"
 #include "mfp-pxa25x.h"
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 02fdde7e3e34..f181e7b7c6be 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -13,7 +13,7 @@
  * initialization stuff for PXA machines which can be overridden later if
  * need be.
  */
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 6074815a4bca..7ab0cb015d1b 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/gpio/machine.h>
 #include <linux/gpio/property.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index d1347055fbe4..566fb4e2adba 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -9,7 +9,7 @@
  *  on PXA3xx,  what's more important, the low power pin state and
  *  wakeup detection are also supported by the same framework.
  */
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio-pxa.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index a4e878be004a..a273f0af095e 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -15,7 +15,7 @@
  */
 #include <linux/dmaengine.h>
 #include <linux/dma/pxa-dma.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio-pxa.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 1d34de7e5fbe..814e0a12f38a 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -10,7 +10,7 @@
  */
 #include <linux/dmaengine.h>
 #include <linux/dma/pxa-dma.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio-pxa.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 27293549f8ad..49d2e46a1fae 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -2,7 +2,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/io.h>
 #include <asm/proc-fns.h>
 #include <asm/system_misc.h>
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 71b282b146d0..a611eea70e5a 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/suspend.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 5091b601c4e1..5eaf38243b9e 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -12,7 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/gpio/machine.h>
 #include <linux/gpio/property.h>
 #include <linux/leds.h>
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 03b4b347f11a..806847c36549 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/gpio-pxa.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>