From c7b3ae0bd2ca658c7a71c49901d08c590294fac9 Mon Sep 17 00:00:00 2001 From: "Ziqian SUN (Zamir)" Date: Mon, 11 Sep 2017 14:26:35 +0800 Subject: tracing: Ignore mmiotrace from kernel commandline The mmiotrace tracer cannot be enabled with ftrace=mmiotrace in kernel commandline. With this patch, noboot is added to the tracer struct, and when system boot with a tracer that has noboot=true, it will print out a warning message and continue booting. Link: http://lkml.kernel.org/r/1505111195-31942-1-git-send-email-zsun@redhat.com Signed-off-by: Ziqian SUN (Zamir) Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'kernel/trace/trace.h') diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index fb5d54d0d1b3..652c682707cd 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -444,6 +444,8 @@ struct tracer { #ifdef CONFIG_TRACER_MAX_TRACE bool use_max_tr; #endif + /* True if tracer cannot be enabled in kernel param */ + bool noboot; }; -- cgit v1.2.3 From d8c4deee6dc6876ae3b7d09a5b58138a57ee45f6 Mon Sep 17 00:00:00 2001 From: Joel Fernandes Date: Fri, 8 Sep 2017 23:55:17 -0700 Subject: tracing: Remove obsolete sched_switch tracer selftest Since commit 87d80de2800d087ea833cb79bc13f85ff34ed49f ("tracing: Remove obsolete sched_switch tracer"), the sched_switch tracer selftest is no longer used. This patch removes the same. Link: http://lkml.kernel.org/r/20170909065517.22262-1-joelaf@google.com Cc: Ingo Molnar Cc: kernel-team@android.com Signed-off-by: Joel Fernandes Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'kernel/trace/trace.h') diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 652c682707cd..3c078e2ad777 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -738,8 +738,6 @@ extern int trace_selftest_startup_wakeup(struct tracer *trace, struct trace_array *tr); extern int trace_selftest_startup_nop(struct tracer *trace, struct trace_array *tr); -extern int trace_selftest_startup_sched_switch(struct tracer *trace, - struct trace_array *tr); extern int trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr); /* -- cgit v1.2.3 From 7e465baa80293ed5f87fdf6405391d6f02110d4e Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Fri, 22 Sep 2017 14:58:20 -0500 Subject: tracing: Make traceprobe parsing code reusable traceprobe_probes_write() and traceprobe_command() actually contain nothing that ties them to kprobes - the code is generically useful for similar types of parsing elsewhere, so separate it out and move it to trace.c/trace.h. Other than moving it, the only change is in naming: traceprobe_probes_write() becomes trace_parse_run_command() and traceprobe_command() becomes trace_run_command(). Link: http://lkml.kernel.org/r/ae5c26ea40c196a8986854d921eb6e713ede7e3f.1506105045.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'kernel/trace/trace.h') diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 3c078e2ad777..f8343eb3c1f9 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -1752,6 +1752,13 @@ void trace_printk_start_comm(void); int trace_keep_overwrite(struct tracer *tracer, u32 mask, int set); int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled); +#define MAX_EVENT_NAME_LEN 64 + +extern int trace_run_command(const char *buf, int (*createfn)(int, char**)); +extern ssize_t trace_parse_run_command(struct file *file, + const char __user *buffer, size_t count, loff_t *ppos, + int (*createfn)(int, char**)); + /* * Normal trace_printk() and friends allocates special buffers * to do the manipulation, as well as saves the print formats -- cgit v1.2.3 From 6aa7de059173a986114ac43b8f50b297a86f09a8 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Mon, 23 Oct 2017 14:07:29 -0700 Subject: locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland Signed-off-by: Paul E. McKenney Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar --- kernel/trace/trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'kernel/trace/trace.h') diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 652c682707cd..9050c8b3ccde 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -1459,7 +1459,7 @@ extern struct trace_event_file *find_event_file(struct trace_array *tr, static inline void *event_file_data(struct file *filp) { - return ACCESS_ONCE(file_inode(filp)->i_private); + return READ_ONCE(file_inode(filp)->i_private); } extern struct mutex event_mutex; -- cgit v1.2.3 From b24413180f5600bcb3bb70fbed5cf186b60864bd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 1 Nov 2017 15:07:57 +0100 Subject: License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman --- kernel/trace/trace.h | 1 + 1 file changed, 1 insertion(+) (limited to 'kernel/trace/trace.h') diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 652c682707cd..401b0639116f 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_KERNEL_TRACE_H #define _LINUX_KERNEL_TRACE_H -- cgit v1.2.3