From cf8e9203cc653f0a82639f7ce8089fa92afe6739 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 26 Feb 2026 14:09:42 -0800 Subject: virt: fsl_hypervisor: fix header kernel-doc warnings Correct struct member names to placate kernel-doc warnings: Warning: include/uapi/linux/fsl_hypervisor.h:148 struct member 'local_vaddr' not described in 'fsl_hv_ioctl_memcpy' Warning: include/uapi/linux/fsl_hypervisor.h:148 struct member 'remote_paddr' not described in 'fsl_hv_ioctl_memcpy' Fixes: 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver") Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20260226220942.1035295-1-rdunlap@infradead.org Signed-off-by: Christophe Leroy (CS GROUP) --- include/uapi/linux/fsl_hypervisor.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fsl_hypervisor.h b/include/uapi/linux/fsl_hypervisor.h index 1e237fba951f..ab4388441e80 100644 --- a/include/uapi/linux/fsl_hypervisor.h +++ b/include/uapi/linux/fsl_hypervisor.h @@ -114,9 +114,9 @@ struct fsl_hv_ioctl_stop { * @target: the partition ID of the target partition, or -1 for this * partition * @reserved: reserved, must be set to 0 - * @local_addr: user-space virtual address of a buffer in the local + * @local_vaddr: user-space virtual address of a buffer in the local * partition - * @remote_addr: guest physical address of a buffer in the + * @remote_paddr: guest physical address of a buffer in the * remote partition * @count: the number of bytes to copy. Both the local and remote * buffers must be at least 'count' bytes long -- cgit v1.2.3 From f7a6b9eaff3e6693ba3b19c5812e28538049bbf2 Mon Sep 17 00:00:00 2001 From: Alan Maguire Date: Fri, 17 Apr 2026 15:30:18 +0100 Subject: bpf: Extend BTF UAPI vlen, kinds to use unused bits BTF maximum vlen is encoded using 16 bits with a maximum vlen of 65535. This has sufficed for structs, function parameters and enumerated type values. However, with upcoming BTF location information - in particular information about inline sites - this limit is surpassed. Use bits 16-23 - currently unused in BTF info - to extend to 24 bits, giving a max vlen of (2^24 - 1), or 16 million. Also extend BTF kind encoding from 5 to 7 bits, giving a maximum available number of kinds of 128. Since with the BTF location work we use another 3 kinds, we are fast approaching the current limit of 32. Convert BTF_MAX_* values to enums to allow them to be encoded in kernel BTF; this will allow us to detect if the running kernel supports a 24-bit vlen or not. Add one for max _possible_ (not used) kind. Fix up a few places in the kernel where a 16-bit vlen is assumed; remove BTF_INFO_MASK as now all bits are used. The vlen expansion was suggested by Andrii in [1]; the kind expansion is tackled here too as it may be needed also to support new kinds in BTF. [1] https://lore.kernel.org/bpf/CAEf4BzZx=X6vGqcA8SPU6D+v6k+TR=ZewebXMuXtpmML058piw@mail.gmail.com/ Suggested-by: Andrii Nakryiko Signed-off-by: Alan Maguire Acked-by: Mykyta Yatsenko Link: https://lore.kernel.org/r/20260417143023.1551481-2-alan.maguire@oracle.com Signed-off-by: Alexei Starovoitov --- include/uapi/linux/btf.h | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index 638615ebddc2..618167cab4e6 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -33,20 +33,22 @@ struct btf_header { __u32 layout_len; /* length of layout section */ }; -/* Max # of type identifier */ -#define BTF_MAX_TYPE 0x000fffff -/* Max offset into the string section */ -#define BTF_MAX_NAME_OFFSET 0x00ffffff -/* Max # of struct/union/enum members or func args */ -#define BTF_MAX_VLEN 0xffff +enum btf_max { + /* Max possible kind */ + BTF_MAX_KIND = 0x0000007f, + /* Max # of type identifier */ + BTF_MAX_TYPE = 0x000fffff, + /* Max offset into the string section */ + BTF_MAX_NAME_OFFSET = 0x00ffffff, + /* Max # of struct/union/enum members or func args */ + BTF_MAX_VLEN = 0x00ffffff, +}; struct btf_type { __u32 name_off; /* "info" bits arrangement - * bits 0-15: vlen (e.g. # of struct's members) - * bits 16-23: unused - * bits 24-28: kind (e.g. int, ptr, array...etc) - * bits 29-30: unused + * bits 0-23: vlen (e.g. # of struct's members) + * bits 24-30: kind (e.g. int, ptr, array...etc) * bit 31: kind_flag, currently used by * struct, union, enum, fwd, enum64, * decl_tag and type_tag @@ -65,8 +67,8 @@ struct btf_type { }; }; -#define BTF_INFO_KIND(info) (((info) >> 24) & 0x1f) -#define BTF_INFO_VLEN(info) ((info) & 0xffff) +#define BTF_INFO_KIND(info) (((info) >> 24) & 0x7f) +#define BTF_INFO_VLEN(info) ((info) & 0xffffff) #define BTF_INFO_KFLAG(info) ((info) >> 31) enum { -- cgit v1.2.3 From dd59392a3ec23dbe3a3fabadcf3bb847e9592ccd Mon Sep 17 00:00:00 2001 From: Francesco Lavra Date: Tue, 24 Mar 2026 09:47:59 +0100 Subject: iio: ABI: Add quaternion axis modifier This modifier applies to the IIO_ROT channel type, and indicates a data representation that specifies the {x, y, z} components of the normalized quaternion vector. Signed-off-by: Francesco Lavra Reviewed-by: David Lechner Signed-off-by: Jonathan Cameron --- include/uapi/linux/iio/types.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index 6d269b844271..d7c2bb223651 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -113,6 +113,7 @@ enum iio_modifier { IIO_MOD_ACTIVE, IIO_MOD_REACTIVE, IIO_MOD_APPARENT, + IIO_MOD_QUATERNION_AXIS, }; enum iio_event_type { -- cgit v1.2.3 From 032d1a3fc0e95ca804213df65ef57f5ced2a867b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 15 Apr 2026 14:42:05 +0200 Subject: wifi: nl80211: document channel opmode change channel width The opmode change notification is entirely unused by existing userspace except for printing out the values. As such, there's no need to keep it perfectly accurate, and the implementation in mac80211 doesn't report it correctly today. Add a note in the documentation that it may not differentiate 80+80 and 160. Reviewed-by: Miriam Rachel Korenblit Link: https://patch.msgid.link/20260415144514.87d5b1ce688f.Ia9a0769d52dcfe56f7b0dff903ed14db3ef04920@changeid Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 3d55bf4be36f..072b383d7d3c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1204,10 +1204,12 @@ * user space through the connect result as the user space would have * initiated the connection through the connect request. * - * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's - * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, - * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its - * address(specified in %NL80211_ATTR_MAC). + * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notifies that a station's + * HT opmode or VHT opmode changed using any of %NL80211_ATTR_SMPS_MODE, + * %NL80211_ATTR_CHANNEL_WIDTH, %NL80211_ATTR_NSS attributes with its + * address (specified in %NL80211_ATTR_MAC). + * Note that 80+80 and 160 MHz might not be differentiated, i.e. may + * report %NL80211_CHAN_WIDTH_160 instead of %NL80211_CHAN_WIDTH_80P80. * * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. -- cgit v1.2.3 From 781c8893a5da8522ae4ded93e5ef3adbe9559300 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Tue, 28 Apr 2026 17:49:06 +0200 Subject: dpll: add pin operational state Add pin-operstate enum and operstate_on_dpll_get callback to report the actual hardware status of a pin with respect to its parent DPLL device. Unlike pin-state (which reflects administrative intent set by the user), operstate reflects what the hardware is actually doing. Defined operational states: - active: pin is qualified and actively used by the DPLL - standby: pin is qualified but not actively used by the DPLL - no-signal: pin does not have a valid signal - qual-failed: pin signal failed qualification The operstate is reported inside the pin-parent-device nested attribute alongside the existing state and phase-offset attributes. Signed-off-by: Ivan Vecera Reviewed-by: Jiri Pirko Reviewed-by: Vadim Fedorenko Reviewed-by: Petr Oros Link: https://patch.msgid.link/20260428154907.2820654-2-ivecera@redhat.com Signed-off-by: Paolo Abeni --- include/uapi/linux/dpll.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h index 871685f7c353..cb363cccf2e2 100644 --- a/include/uapi/linux/dpll.h +++ b/include/uapi/linux/dpll.h @@ -178,6 +178,28 @@ enum dpll_pin_state { DPLL_PIN_STATE_MAX = (__DPLL_PIN_STATE_MAX - 1) }; +/** + * enum dpll_pin_operstate - defines possible operational states of a pin with + * respect to its parent DPLL device, valid values for DPLL_A_PIN_OPERSTATE + * attribute + * @DPLL_PIN_OPERSTATE_ACTIVE: pin is qualified and actively used by the DPLL + * @DPLL_PIN_OPERSTATE_STANDBY: pin is qualified but not actively used by the + * DPLL + * @DPLL_PIN_OPERSTATE_NO_SIGNAL: pin does not have a valid signal + * @DPLL_PIN_OPERSTATE_QUAL_FAILED: pin signal failed qualification (e.g. + * frequency or phase monitor) + */ +enum dpll_pin_operstate { + DPLL_PIN_OPERSTATE_ACTIVE = 1, + DPLL_PIN_OPERSTATE_STANDBY, + DPLL_PIN_OPERSTATE_NO_SIGNAL, + DPLL_PIN_OPERSTATE_QUAL_FAILED, + + /* private: */ + __DPLL_PIN_OPERSTATE_MAX, + DPLL_PIN_OPERSTATE_MAX = (__DPLL_PIN_OPERSTATE_MAX - 1) +}; + /** * enum dpll_pin_capabilities - defines possible capabilities of a pin, valid * flags on DPLL_A_PIN_CAPABILITIES attribute @@ -257,6 +279,7 @@ enum dpll_a_pin { DPLL_A_PIN_PHASE_ADJUST_GRAN, DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET_PPT, DPLL_A_PIN_MEASURED_FREQUENCY, + DPLL_A_PIN_OPERSTATE, __DPLL_A_PIN_MAX, DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1) -- cgit v1.2.3 From 5d801b59633f6af60bb0e18d3bbb18b7b040a6d9 Mon Sep 17 00:00:00 2001 From: Jackson Lee Date: Tue, 24 Mar 2026 14:03:57 +0900 Subject: media: v4l2-controls: Add control for background detection Add a generic V4L2 boolean control V4L2_CID_MPEG_VIDEO_BACKGROUND_DETECTION that allows encoders to detect background regions in a frame and use fewer bits or skip mode to encode them, potentially reducing bitrate for streams with stationary scenes. Signed-off-by: Jackson Lee Signed-off-by: Nas Chung Reviewed-by: Nicolas Dufresne Signed-off-by: Nicolas Dufresne Signed-off-by: Hans Verkuil --- include/uapi/linux/v4l2-controls.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 68dd0c4e47b2..affec0ab4781 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -464,6 +464,8 @@ enum v4l2_mpeg_video_intra_refresh_period_type { V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_CYCLIC = 1, }; +#define V4L2_CID_MPEG_VIDEO_BACKGROUND_DETECTION (V4L2_CID_CODEC_BASE + 238) + /* CIDs for the MPEG-2 Part 2 (H.262) codec */ #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270) enum v4l2_mpeg_video_mpeg2_level { -- cgit v1.2.3 From 829b815e910b8cc7bf36c85005abc3e66b59303b Mon Sep 17 00:00:00 2001 From: Kavita Kavita Date: Mon, 4 May 2026 18:06:23 +0530 Subject: wifi: cfg80211: indicate (Re)Association frame encryption to userspace In SME-in-driver mode, the driver handles the entire (re)association exchange. Userspace (e.g., wpa_supplicant) currently has no explicit indication of whether the (re)association exchange was encrypted, making it difficult to distinguish EPP (Enhanced Privacy Protection, IEEE 802.11bi) associations from non-EPP associations. When (Re)Association frame encryption is used, the (Re)Association Response frame must contain a Key Delivery element as specified in IEEE P802.11bi/D4.0, Table 9-65. Userspace must process this element only when the (Re)Association Response frame is actually encrypted. Processing it unconditionally for unencrypted frames leads to incorrect behavior. Without an explicit indication from the driver, userspace cannot determine whether encryption was used and whether the Key Delivery element is valid. Add a new flag attribute NL80211_ATTR_ASSOC_ENCRYPTED and a corresponding field "assoc_encrypted" in cfg80211_connect_resp_params to indicate that both the (Re)Association Request and Response frames are transmitted encrypted over the air. For mac80211-based drivers, extend cfg80211_rx_assoc_resp_data with the assoc_encrypted field as well, which is then propagated to cfg80211_connect_resp_params. Pass the flag to userspace via NL80211_CMD_CONNECT event. Signed-off-by: Kavita Kavita Link: https://patch.msgid.link/20260504123624.529218-2-kavita.kavita@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 072b383d7d3c..e26d65c1b737 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3142,6 +3142,13 @@ enum nl80211_commands { * association response etc., since it's abridged in the beacon. Used * for START_AP etc. * + * @NL80211_ATTR_ASSOC_ENCRYPTED: Flag attribute, used only with the + * %NL80211_CMD_CONNECT event in SME-in-driver mode. The driver should + * set this flag to indicate that both the (Re)Association Request frame + * and the corresponding (Re)Association Response frame are transmitted + * encrypted over the air. Enhanced Privacy Protection (EPP), as defined + * in IEEE P802.11bi/D4.0, mandates this encryption. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3735,6 +3742,8 @@ enum nl80211_attrs { NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME, NL80211_ATTR_NAN_PEER_MAPS, + NL80211_ATTR_ASSOC_ENCRYPTED, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 4dbd1829045ee4146ae16b0e1ad122d855a694cb Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:45 +0530 Subject: wifi: cfg80211: Add MAC address filter to remain_on_channel Currently the remain_on_channel operation does not support filtering incoming frames by destination MAC address. This prevents use cases such as PASN authentication in the responder side that need to receive frames addressed to a specific MAC during the off-channel period. Add an rx_addr parameter to the remain_on_channel operation callback and propagate it through the call chain from nl80211 to driver implementations. Introduce the extended feature NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so that cfg80211 rejects the request if the driver does not advertise support for address filtering. Extract the address from the NL80211_ATTR_MAC attribute when provided in the netlink message and update the tracing infrastructure to include the address in remain_on_channel trace events. The rx_addr parameter is optional and can be NULL, maintaining backward compatibility with existing drivers. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e26d65c1b737..8103f2912abc 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -729,7 +729,9 @@ * to remain on the channel. This command is also used as an event to * notify when the requested duration starts (it may take a while for the * driver to schedule this time due to other concurrent needs for the - * radio). + * radio). An optional attribute %NL80211_ATTR_MAC can be used to filter + * incoming frames during remain-on-channel, such that frames + * addressed to the specified destination MAC are reported. * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) * that will be included with any events pertaining to this request; * the cookie is also used to cancel the request. @@ -7040,6 +7042,12 @@ enum nl80211_feature_flags { * (NL80211_CMD_AUTHENTICATE) in non-AP STA mode, as specified in * "IEEE P802.11bi/D4.0, 12.16.5". * + * @NL80211_EXT_FEATURE_ROC_ADDR_FILTER: Driver supports MAC address + * filtering during remain-on-channel. When %NL80211_ATTR_MAC is + * provided with %NL80211_CMD_REMAIN_ON_CHANNEL, the driver will + * forward frames with a matching MAC address to userspace during + * the off-channel period. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -7119,6 +7127,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_EPPKE, NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION, NL80211_EXT_FEATURE_IEEE8021X_AUTH, + NL80211_EXT_FEATURE_ROC_ADDR_FILTER, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit v1.2.3 From 55f23d68f93a4cce394885886cdcd4015c35e951 Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:46 +0530 Subject: wifi: cfg80211/mac80211: Add NL80211_IFTYPE_PD for PD PASN and PMSR operations Add a new wdev-only interface type NL80211_IFTYPE_PD to support Proximity Detection (PD) operations such as PASN and peer measurement operations. This interface type operates without a netdev, similar to P2P_DEVICE and NAN interfaces. Implement support across cfg80211 and mac80211 layers with PD-specific checks gated by the NL80211_EXT_FEATURE_SECURE_RTT feature flag, management frame registration and transmission capabilities, and proper channel context handling where PD interfaces are excluded from bandwidth calculations. Update mac80211 to recognize the new interface type in the relevant paths for this management-only interface. PD discovery can be performed on any available interface, such as NL80211_IFTYPE_STATION. If PD/PMSR uses the MAC address of an existing interface type, such as NL80211_IFTYPE_STATION, then pairing and measurement shall use that same interface. If PD/PMSR uses a different MAC address, such as a random MAC address, then pairing and measurement can be performed on a new NL80211_IFTYPE_PD interface created with that random MAC address. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-4-peddolla.reddy@oss.qualcomm.com [fix comment style] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 8103f2912abc..69e13cd7978a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3842,6 +3842,7 @@ enum nl80211_attrs { * @NL80211_IFTYPE_NAN_DATA: NAN data interface type (netdev); NAN data * interfaces can only be brought up (IFF_UP) when a NAN interface * already exists and NAN has been started (using %NL80211_CMD_START_NAN). + * @NL80211_IFTYPE_PD: PD device interface type (not a netdev) * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -3864,6 +3865,7 @@ enum nl80211_iftype { NL80211_IFTYPE_OCB, NL80211_IFTYPE_NAN, NL80211_IFTYPE_NAN_DATA, + NL80211_IFTYPE_PD, /* keep last */ NUM_NL80211_IFTYPES, -- cgit v1.2.3 From b47a6e4d662976efbe53518cb22cf7df86d19c75 Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:47 +0530 Subject: wifi: cfg80211: add start/stop proximity detection commands Currently, the proximity detection (PD) interface type has no start/stop commands defined, preventing user space from controlling PD operations through the nl80211 interface. Add NL80211_CMD_START_PD and NL80211_CMD_STOP_PD commands to allow user space to start and stop a PD interface. Add the corresponding start_pd and stop_pd operations to cfg80211_ops and ieee80211_ops, along with nl80211 command handlers, rdev wrappers, and tracing support. Validate that drivers advertising PD interface support implement the required operations. Handle PD interface teardown during device unregistration and when the interface leaves the network. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-5-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 69e13cd7978a..704607824b8a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1419,6 +1419,12 @@ * identifying the evacuated channel. * User space may reconfigure the local schedule in response to this * notification. + * @NL80211_CMD_START_PD: Start PD operation, identified by its + * %NL80211_ATTR_WDEV interface. This interface must have been previously + * created with %NL80211_CMD_NEW_INTERFACE. + * @NL80211_CMD_STOP_PD: Stop the PD operation, identified by + * its %NL80211_ATTR_WDEV interface. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1694,6 +1700,9 @@ enum nl80211_commands { NL80211_CMD_NAN_CHANNEL_EVAC, + NL80211_CMD_START_PD, + NL80211_CMD_STOP_PD, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3 From 18709c618d3b4b2990f202a436784f4c36e2c193 Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:48 +0530 Subject: wifi: cfg80211: add proximity detection capabilities to PMSR Introduce Proximity Detection (PD) capabilities in Peer Measurement Service (PMSR) as defined in the Wi-Fi Alliance specification "Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1 section 3.3". This enables devices to advertise peer to peer ranging support. Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace the single support_rsta flag with nested ista and rsta sub-structs, each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based (TB), and EDCA based ranging. This allows drivers to advertise detailed role and protocol support for both initiator and responder roles. Add support to pass additional ISTA and RSTA role capabilities to userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The legacy RSTA_SUPPORT flag is retained for backward compatibility. Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the nl80211_peer_measurement_ftm_type_capa enum with two sub-flags: NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT for peer-to-peer ranging. Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating the device can simultaneously act as initiator and responder in a multi-peer measurement request. Extend FTM capabilities with antenna configuration fields (max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element during PASN negotiation, and ranging interval limits (min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb) to advertise device timing constraints for EDCA and NTB-based ranging. Update the FTM request validation path in pmsr.c to check RSTA requests against the per-mode rsta capabilities (NTB, TB, EDCA), rejecting requests for modes the device does not support. Co-developed-by: Kavita Kavita Signed-off-by: Kavita Kavita Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 78 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 704607824b8a..ea0acce724ca 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -8111,6 +8111,46 @@ enum nl80211_peer_measurement_attrs { * This limits the allowed combinations of LTF repetitions and STS. * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT: flag attribute indicating the * device supports operating as the RSTA in PMSR FTM request + * @NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS: nested attribute containing ISTA + * (initiator) role capabilities. Uses the same sub-attributes as + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS. + * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS: nested attribute containing RSTA + * (responder) role capabilities. + * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_NTB: flag attribute (used inside + * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating NTB ranging support. + * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_TB: flag attribute (used inside + * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating TB ranging support. + * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_EDCA: flag attribute (used inside + * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating EDCA based ranging + * support. + * @NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS: nested attribute containing ranging + * type capabilities. Uses sub-attributes from + * &enum nl80211_peer_measurement_ftm_type_capa. + * @NL80211_PMSR_FTM_CAPA_ATTR_CONCURRENT_ISTA_RSTA_SUPPORT: flag attribute + * indicating that the device can simultaneously act as initiator and + * responder in a multi-peer measurement request. Only valid if + * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT is set. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_TX_ANTENNAS: u32 attribute indicating + * the maximum number of transmit antennas supported for EDCA based ranging + * (0 means unknown) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_RX_ANTENNAS: u32 attribute indicating + * the maximum number of receive antennas supported for EDCA based ranging + * (0 means unknown) + * @NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_EDCA: u32 attribute indicating + * the minimum EDCA ranging interval supported by the device + * in milli seconds. (0 means unknown). Applications can use this value + * to estimate the burst period to be given in the FTM request for the + * EDCA based ranging case. If non-zero, this value will be used to + * validate the burst period in the FTM request. + * @NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_NTB: u32 attribute indicating + * the minimum NTB ranging interval supported by the device + * in milli seconds. (0 means unknown). Applications can use this value + * to estimate the burst period to be given in the FTM request for the + * NTB ranging case. If non-zero, this value will be used to validate + * the nominal time in the FTM request. * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number @@ -8136,12 +8176,50 @@ enum nl80211_peer_measurement_ftm_capa { NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX, NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX, NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT, + NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS, + NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS, + NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_NTB, + NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_TB, + NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_EDCA, + NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS, + NL80211_PMSR_FTM_CAPA_ATTR_CONCURRENT_ISTA_RSTA_SUPPORT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_TX_ANTENNAS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_RX_ANTENNAS, + NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_EDCA, + NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_NTB, /* keep last */ NUM_NL80211_PMSR_FTM_CAPA_ATTR, NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 }; +/** + * enum nl80211_peer_measurement_ftm_type_capa - FTM ranging type capability + * sub-attributes, used inside %NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS + * @__NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT: flag attribute indicating + * that the device supports infrastructure ranging (STA-to-AP or + * AP-to-STA) as part of Proximity Detection + * @NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT: flag attribute indicating that + * the device supports peer-to-peer ranging as mentioned in the + * specification "PR Implementation Consideration Draft 1.9 rev 1" where + * PD stands for proximity detection + * + * @NUM_NL80211_PMSR_FTM_TYPE_CAPA_ATTR: internal + * @NL80211_PMSR_FTM_TYPE_CAPA_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_type_capa { + __NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INVALID, + + NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT, + NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT, + + /* keep last */ + NUM_NL80211_PMSR_FTM_TYPE_CAPA_ATTR, + NL80211_PMSR_FTM_TYPE_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_TYPE_CAPA_ATTR - 1 +}; + /** * enum nl80211_peer_measurement_ftm_req - FTM request attributes * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid -- cgit v1.2.3 From 8823a9b0e7af5395cbfa06bf23806197d59cd124 Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:49 +0530 Subject: wifi: cfg80211: add NTB continuous ranging and FTM request type support Enable NTB continuous ranging with configurable timing and measurement parameters as per the Wi-Fi Alliance specification "Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add new FTM request attributes for min/max time between measurements, nominal time (mandatory for NTB), AW duration, and total measurement count. Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new nl80211_peer_measurement_ftm_req_type enum to allow userspace to specify the ranging request type per peer: - NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging (default if attribute is absent) - NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging Validate the request type against the device TYPE_CAPS capabilities advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD requests if the device does not advertise PD support. Reject PD requests that set trigger-based ranging, as TB ranging is not compatible with peer-to-peer proximity detection. Add ftms_per_burst limit of 4 for PD NTB ranging requests. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 62 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 60 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ea0acce724ca..6be89e656276 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -7991,6 +7991,26 @@ enum nl80211_peer_measurement_resp { NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 }; +/** + * enum nl80211_peer_measurement_ftm_req_type - FTM ranging request type, + * used with %NL80211_PMSR_PEER_ATTR_REQ_TYPE + * + * @NL80211_PMSR_FTM_REQ_TYPE_INFRA: infrastructure ranging, i.e. STA-to-AP + * @NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging as defined in the + * Wi-Fi Alliance specification "Proximity Ranging (PR) Implementation + * Consideration Draft 1.9 Rev 1" + * @NUM_NL80211_PMSR_FTM_REQ_TYPE: internal + * @NL80211_PMSR_FTM_REQ_TYPE_MAX: highest request type value + */ +enum nl80211_peer_measurement_ftm_req_type { + NL80211_PMSR_FTM_REQ_TYPE_INFRA, + NL80211_PMSR_FTM_REQ_TYPE_PD, + + /* keep last */ + NUM_NL80211_PMSR_FTM_REQ_TYPE, + NL80211_PMSR_FTM_REQ_TYPE_MAX = NUM_NL80211_PMSR_FTM_REQ_TYPE - 1 +}; + /** * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid @@ -8004,6 +8024,9 @@ enum nl80211_peer_measurement_resp { * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by * measurement type, with attributes from the * &enum nl80211_peer_measurement_resp inside. + * @NL80211_PMSR_PEER_ATTR_REQ_TYPE: u32 attribute specifying the ranging + * request type, using values from &enum nl80211_peer_measurement_ftm_req_type. + * If absent, defaults to %NL80211_PMSR_FTM_REQ_TYPE_INFRA. * * @NUM_NL80211_PMSR_PEER_ATTRS: internal * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number @@ -8015,6 +8038,7 @@ enum nl80211_peer_measurement_peer_attrs { NL80211_PMSR_PEER_ATTR_CHAN, NL80211_PMSR_PEER_ATTR_REQ, NL80211_PMSR_PEER_ATTR_RESP, + NL80211_PMSR_PEER_ATTR_REQ_TYPE, /* keep last */ NUM_NL80211_PMSR_PEER_ATTRS, @@ -8238,9 +8262,11 @@ enum nl80211_peer_measurement_ftm_type_capa { * default 15 i.e. "no preference"). For non-EDCA ranging, this is the * burst duration in milliseconds (optional with default 0, i.e. let the * device decide). - * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames - * requested per burst + * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: (Optional) number of successful + * FTM frames requested per burst * (u8, 0-31, optional with default 0 i.e. "no preference") + * If the attribute is absent ("no preference"), the driver or firmware can + * choose a suitable value. * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries * (u8, default 3) * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) @@ -8274,6 +8300,33 @@ enum nl80211_peer_measurement_ftm_type_capa { * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK is set (so the * RSTA will have the measurement results to report back in the FTM * response). + * @NL80211_PMSR_FTM_REQ_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS: minimum time + * between two consecutive range measurements in units of 100 microseconds, + * for non-trigger based ranging (u32). Should be set as short as possible + * to minimize turnaround time, since two-way ranging with delayed LMR + * requires two measurements. Only valid if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS: maximum time + * between two consecutive range measurements in units of 10 milliseconds, + * for non-trigger based ranging (u32). Acts as a session timeout; if + * exceeded, the ranging session should be terminated. Only valid if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME: The nominal time field shall be + * set to the nominal duration between adjacent Availability Windows in + * units of milli seconds (u32). Mandatory if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_AW_DURATION: (Optional) The AW duration field + * shall be set to the duration of the AW in units of 1ms (0-255 ms) (u32). + * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * If the attribute is absent ("no preference"), the driver or firmware + * can choose a suitable value. + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_MEASUREMENTS: (Optional) number of + * Availability Windows (AWs) to schedule for non-trigger-based ranging. + * Each AW may contain multiple FTM exchanges as configured by + * %NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST. Only valid if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * If the attribute is absent ("no preference"), the driver or firmware + * can choose a suitable value. * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -8295,6 +8348,11 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, NL80211_PMSR_FTM_REQ_ATTR_RSTA, + NL80211_PMSR_FTM_REQ_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_REQ_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME, + NL80211_PMSR_FTM_REQ_ATTR_AW_DURATION, + NL80211_PMSR_FTM_REQ_ATTR_NUM_MEASUREMENTS, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, -- cgit v1.2.3 From 4e901e99edd2c289e6917cb79027e39c98d711e2 Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:50 +0530 Subject: wifi: cfg80211: extend PMSR FTM response for proximity ranging Applications need negotiated session parameters to interpret proximity ranging results and perform post-processing. Currently, the FTM response lacks LTF repetition counts, time constraints, spatial stream configuration, and availability window parameters. Extend the FTM response structure to report these negotiated parameters, enabling applications to track session configuration and use them in post-processing to increase ranging precision. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6be89e656276..08e8e4de650c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -8439,6 +8439,33 @@ enum nl80211_peer_measurement_ftm_failure_reasons { * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only * @NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD: actual burst period used by * the responder (similar to request, u16) + * @NL80211_PMSR_FTM_RESP_ATTR_TX_LTF_REPETITION_COUNT: negotiated value of + * number of tx ltf repetitions in NDP frames (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_RX_LTF_REPETITION_COUNT: negotiated value of + * number of rx ltf repetitions in NDP frames (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS: negotiated value + * where latest time by which the ISTA needs to complete the next round of + * measurements, in units of 10 ms (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS: negotiated + * minimum time between two consecutive range measurements initiated by an + * ISTA, in units of 100 us (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_TX_SPATIAL_STREAMS: number of Tx space-time + * streams used in NDP frames during the measurement sounding phase + * (u32, optional). + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_RX_SPATIAL_STREAMS: number of Rx space-time + * streams used in the NDP frames during the measurement sounding phase + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NOMINAL_TIME: negotiated nominal time used in + * this session in milliseconds. (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_AVAILABILITY_WINDOW: negotiated availability + * window time used in this session, in units of milli seconds. + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_CHANNEL_WIDTH: u32 attribute indicating channel + * width used for measurement, see &enum nl80211_chan_width (optional). + * @NL80211_PMSR_FTM_RESP_ATTR_PREAMBLE: u32 attribute indicating the preamble + * type used for the measurement, see &enum nl80211_preamble (optional). + * @NL80211_PMSR_FTM_RESP_ATTR_IS_DELAYED_LMR: flag, indicates if the + * current result is delayed LMR data. * * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number @@ -8468,6 +8495,17 @@ enum nl80211_peer_measurement_ftm_resp { NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, NL80211_PMSR_FTM_RESP_ATTR_PAD, NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD, + NL80211_PMSR_FTM_RESP_ATTR_TX_LTF_REPETITION_COUNT, + NL80211_PMSR_FTM_RESP_ATTR_RX_LTF_REPETITION_COUNT, + NL80211_PMSR_FTM_RESP_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_RESP_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_TX_SPATIAL_STREAMS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_RX_SPATIAL_STREAMS, + NL80211_PMSR_FTM_RESP_ATTR_NOMINAL_TIME, + NL80211_PMSR_FTM_RESP_ATTR_AVAILABILITY_WINDOW, + NL80211_PMSR_FTM_RESP_ATTR_CHANNEL_WIDTH, + NL80211_PMSR_FTM_RESP_ATTR_PREAMBLE, + NL80211_PMSR_FTM_RESP_ATTR_IS_DELAYED_LMR, /* keep last */ NUM_NL80211_PMSR_FTM_RESP_ATTR, -- cgit v1.2.3 From ea996c2c036df21fbd3b195e6c5c42c11eadb6c4 Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:51 +0530 Subject: wifi: cfg80211: add role-based peer limits to FTM capabilities Peer measurement capabilities currently advertise a single maximum peer count regardless of device role. Some devices support different peer limits when operating as initiator versus responder. Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer limits. These limits are generic and not restricted to any specific ranging type. Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the ISTA_CAPS and RSTA_CAPS nested attributes respectively. When a role limit is advertised, validate the number of peers in the request separately for each role using the existing rsta flag in the FTM request, and reject the request if the limit is exceeded. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 08e8e4de650c..e31ff2a745b2 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -8065,6 +8065,18 @@ enum nl80211_peer_measurement_peer_attrs { * meaningless, just a list of peers to measure with, with the * sub-attributes taken from * &enum nl80211_peer_measurement_peer_attrs. + * @NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE: u32 attribute indicating the + * maximum number of peers supported when the device operates in the + * ISTA (Initiator STA) role. If absent, no role-specific peer limit + * applies. The sum of %NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE and + * %NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE is enforced when the device + * supports concurrent ISTA/RSTA operation. + * @NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE: u32 attribute indicating the + * maximum number of peers supported when the device operates in the + * RSTA (Responder STA) role. If absent, no role-specific peer limit + * applies. The sum of %NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE and + * %NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE is enforced when the device + * supports concurrent ISTA/RSTA operation. * * @NUM_NL80211_PMSR_ATTR: internal * @NL80211_PMSR_ATTR_MAX: highest attribute number @@ -8077,6 +8089,8 @@ enum nl80211_peer_measurement_attrs { NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, NL80211_PMSR_ATTR_TYPE_CAPA, NL80211_PMSR_ATTR_PEERS, + NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE, + NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE, /* keep last */ NUM_NL80211_PMSR_ATTR, -- cgit v1.2.3 From 99529edd28df505576366753e204ba78a406659b Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:52 +0530 Subject: wifi: cfg80211: add ingress/egress distance thresholds for FTM Proximity detection applications need to receive measurement results only when devices cross specific distance boundaries to avoid unnecessary host wakeups and reduce power consumption. Introduce configurable distance-based reporting thresholds that drivers can use to implement selective result reporting. Add ingress and egress distance parameters allowing applications to specify when results should be reported as peers cross these boundaries. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com [remove mm units from variables] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e31ff2a745b2..02fe42b4f29c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -8341,6 +8341,18 @@ enum nl80211_peer_measurement_ftm_type_capa { * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. * If the attribute is absent ("no preference"), the driver or firmware * can choose a suitable value. + * @NL80211_PMSR_FTM_REQ_ATTR_PAD: ignore, for u64/s64 padding only. + * @NL80211_PMSR_FTM_REQ_ATTR_INGRESS: optional u64 attribute in units of mm. + * When specified, the measurement result of the peer needs to be + * indicated if the device moves into this range. + * @NL80211_PMSR_FTM_REQ_ATTR_EGRESS: optional u64 attribute in units of mm. + * When specified, the measurement result of the peer needs to be + * indicated if the device moves out of this range. + * If neither or only one of @NL80211_PMSR_FTM_REQ_ATTR_INGRESS and + * @NL80211_PMSR_FTM_REQ_ATTR_EGRESS is specified, only the specified + * threshold is used. If both are specified, both thresholds are applied. + * If neither is specified, results are reported without threshold + * filtering. * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -8367,6 +8379,9 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME, NL80211_PMSR_FTM_REQ_ATTR_AW_DURATION, NL80211_PMSR_FTM_REQ_ATTR_NUM_MEASUREMENTS, + NL80211_PMSR_FTM_REQ_ATTR_PAD, + NL80211_PMSR_FTM_REQ_ATTR_INGRESS, + NL80211_PMSR_FTM_REQ_ATTR_EGRESS, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, -- cgit v1.2.3 From 5733daa670dc1e1464be59dfcacaa76597201b3e Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:53 +0530 Subject: wifi: cfg80211: add PD-specific preamble and bandwidth capabilities Devices may support different preamble and bandwidth configurations for proximity detection (PD) ranging versus standard ranging. Add separate pd_preambles and pd_bandwidths fields to cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific capabilities. Expose these over nl80211 using new attributes NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when pd_support is set. For PD requests, validate bandwidth and preamble against pd_bandwidths and pd_preambles. For non-PD requests, validate against the existing bandwidths and preambles fields. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 02fe42b4f29c..5bef8fd25270 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -8189,6 +8189,14 @@ enum nl80211_peer_measurement_attrs { * to estimate the burst period to be given in the FTM request for the * NTB ranging case. If non-zero, this value will be used to validate * the nominal time in the FTM request. + * @NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES: u32 bitmap of values from + * &enum nl80211_preamble indicating the supported preambles for PD + * ranging requests. Only valid if %NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT + * is set. + * @NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS: u32 bitmap of values from + * &enum nl80211_chan_width indicating the supported channel bandwidths + * for PD ranging requests. Only valid if + * %NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT is set. * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number @@ -8225,6 +8233,8 @@ enum nl80211_peer_measurement_ftm_capa { NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_RX_ANTENNAS, NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_EDCA, NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_NTB, + NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES, + NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, /* keep last */ NUM_NL80211_PMSR_FTM_CAPA_ATTR, -- cgit v1.2.3 From 410aa47fd9d308029f3520e97eec71a8eb508622 Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:54 +0530 Subject: wifi: cfg80211: allow suppressing FTM result reporting for PD requests Proximity detection often does not require detailed ranging measurements, yet userspace currently receives full FTM results for every request, causing unnecessary data transfer, host wakeups, and processing overhead. Add an optional control to suppress ranging result reporting for peer-to-peer PD requests. Introduce the NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a PD request, the device may perform the measurements (e.g. when acting as RSTA) but must not report the measurement results to userspace. Validate that the flag is only accepted when request_type is set to NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5bef8fd25270..1da4dc3fc816 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -8363,6 +8363,11 @@ enum nl80211_peer_measurement_ftm_type_capa { * threshold is used. If both are specified, both thresholds are applied. * If neither is specified, results are reported without threshold * filtering. + * @NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS: Flag to suppress ranging + * results for PD requests. When set, ranging measurements are performed + * but results are not reported to userspace, regardless of ranging role + * or type. Only valid when %NL80211_PMSR_PEER_ATTR_REQ_TYPE is set to + * %NL80211_PMSR_FTM_REQ_TYPE_PD. * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -8392,6 +8397,7 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_PAD, NL80211_PMSR_FTM_REQ_ATTR_INGRESS, NL80211_PMSR_FTM_REQ_ATTR_EGRESS, + NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, -- cgit v1.2.3 From 4bb6e58bc29ab772c26c5eb471ab255fe2e044d8 Mon Sep 17 00:00:00 2001 From: Peddolla Harshavardhan Reddy Date: Mon, 20 Apr 2026 14:38:55 +0530 Subject: wifi: cfg80211: add LTF keyseed support for secure ranging Currently there is no way to install an LTF key seed that can be used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging to protect NDP frames. Without this, drivers cannot enable PHY-layer security for peer measurement sessions, leaving ranging measurements vulnerable to eavesdropping and manipulation. Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers to advertise and install LTF key seeds via nl80211. The key seed must be configured beforehand to ensure the peer measurement session is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation to be permitted. The LTF key seed is pairwise key material and must only be used with pairwise key type. Reject attempts to use it with other key types. Signed-off-by: Peddolla Harshavardhan Reddy Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com [fix policy coding style] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1da4dc3fc816..6c7e6c05b9a8 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -5814,6 +5814,18 @@ enum nl80211_key_default_types { * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. * Defaults to @NL80211_KEY_RX_TX. * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key + * @NL80211_KEY_LTF_SEED: LTF key seed is used by the driver to generate + * secure LTF keys used in case of peer measurement request with FTM + * request type as either %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED + * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED. Secure LTF key seeds + * will help enable PHY security in peer measurement session. + * The LTF key seed is installed along with the TK (Temporal Key) using + * %NL80211_CMD_NEW_KEY. The TK is configured using the + * %NL80211_ATTR_KEY_DATA attribute, while the LTF key seed is configured + * using this attribute. Both keys must be configured before initiation + * of peer measurement to ensure peer measurement session is secure. + * Only valid if %NL80211_EXT_FEATURE_SET_KEY_LTF_SEED is set. This + * attribute is restricted to pairwise keys (%NL80211_KEYTYPE_PAIRWISE). * * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute @@ -5830,6 +5842,7 @@ enum nl80211_key_attributes { NL80211_KEY_DEFAULT_TYPES, NL80211_KEY_MODE, NL80211_KEY_DEFAULT_BEACON, + NL80211_KEY_LTF_SEED, /* keep last */ __NL80211_KEY_AFTER_LAST, @@ -7059,6 +7072,10 @@ enum nl80211_feature_flags { * forward frames with a matching MAC address to userspace during * the off-channel period. * + * @NL80211_EXT_FEATURE_SET_KEY_LTF_SEED: Driver supports installing the + * LTF key seed via %NL80211_KEY_LTF_SEED. The seed is used to generate + * secure LTF keys for secure LTF measurement sessions. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -7139,6 +7156,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION, NL80211_EXT_FEATURE_IEEE8021X_AUTH, NL80211_EXT_FEATURE_ROC_ADDR_FILTER, + NL80211_EXT_FEATURE_SET_KEY_LTF_SEED, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit v1.2.3 From ca283942e5b91894d3a9228eaf789837f66c986f Mon Sep 17 00:00:00 2001 From: "Mike Marciniszyn (Meta)" Date: Thu, 30 Apr 2026 11:08:00 -0400 Subject: net: mdio: Add support for RSFEC Control register for PMA Add the constants associated with RS-FEC configuration and status as well as the indicated separated bits for DEVS1 to convey a separated PMA. Reviewed-by: Andrew Lunn Signed-off-by: Mike Marciniszyn (Meta) Link: https://patch.msgid.link/20260430150802.3521-2-mike.marciniszyn@gmail.com Signed-off-by: Paolo Abeni --- include/uapi/linux/mdio.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index 8d769f100de6..b2541c948fc1 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -23,6 +23,10 @@ #define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ #define MDIO_MMD_TC 6 /* Transmission Convergence */ #define MDIO_MMD_AN 7 /* Auto-Negotiation */ +#define MDIO_MMD_SEP_PMA1 8 /* Separated PMA (1) */ +#define MDIO_MMD_SEP_PMA2 9 /* Separated PMA (2) */ +#define MDIO_MMD_SEP_PMA3 10 /* Separated PMA (3) */ +#define MDIO_MMD_SEP_PMA4 11 /* Separated PMA (4) */ #define MDIO_MMD_POWER_UNIT 13 /* PHY Power Unit */ #define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ #define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ @@ -63,6 +67,8 @@ * Lanes B-D are numbered 134-136. */ #define MDIO_PMA_10GBR_FSRT_CSR 147 /* 10GBASE-R fast retrain status and control */ #define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ +#define MDIO_PMA_RSFEC_CTRL 200 /* RSFEC control */ +#define MDIO_PMA_RSFEC_LANE_MAP 206 /* RSFEC lane mapping */ #define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ #define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ @@ -175,6 +181,10 @@ #define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) #define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) #define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) +#define MDIO_DEVS_SEP_PMA1 MDIO_DEVS_PRESENT(MDIO_MMD_SEP_PMA1) +#define MDIO_DEVS_SEP_PMA2 MDIO_DEVS_PRESENT(MDIO_MMD_SEP_PMA2) +#define MDIO_DEVS_SEP_PMA3 MDIO_DEVS_PRESENT(MDIO_MMD_SEP_PMA3) +#define MDIO_DEVS_SEP_PMA4 MDIO_DEVS_PRESENT(MDIO_MMD_SEP_PMA4) #define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) #define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1) #define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2) -- cgit v1.2.3 From fb19b4d67d81fb91d3c0dce0ddea7fc393a37b2e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 28 Apr 2026 11:06:59 +0200 Subject: wifi: cfg80211: allow devices to advertise extended MLD capa/ops For UHR, multi-link power-management capability lives there, and so it's needed that hostapd knows what to advertise, and clients should have it shown to userspace for information. Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define for compatibility) and advertise the capabilities. We can also later use the value, if needed, to set per-station capabilities on STAs added to AP interfaces. Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6c7e6c05b9a8..235d7ae72e60 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3004,11 +3004,13 @@ enum nl80211_commands { * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a * station interface. * - * @NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS: Extended MLD capabilities and - * operations that userspace implements to use during association/ML - * link reconfig, currently only "BTM MLD Recommendation For Multiple - * APs Support". Drivers may set additional flags that they support - * in the kernel or device. + * @NL80211_ATTR_EXT_MLD_CAPA_AND_OPS: Extended MLD capabilities and operations. + * For association and link reconfiguration, indicates extra capabilities + * that userspace implements, currently only "BTM MLD Recommendation For + * Multiple APs Support". + * For wiphy information, additional flags that drivers will set, but + * this is informational only for userspace (it's not expected to set + * these.) * * @NL80211_ATTR_WIPHY_RADIO_INDEX: (int) Integer attribute denoting the index * of the radio in interest. Internally a value of -1 is used to @@ -3715,7 +3717,7 @@ enum nl80211_attrs { NL80211_ATTR_MLO_RECONF_REM_LINKS, NL80211_ATTR_EPCS, - NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS, + NL80211_ATTR_EXT_MLD_CAPA_AND_OPS, NL80211_ATTR_WIPHY_RADIO_INDEX, @@ -3769,6 +3771,7 @@ enum nl80211_attrs { #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA #define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON #define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP +#define NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS NL80211_ATTR_EXT_MLD_CAPA_AND_OPS /* * Allow user space programs to use #ifdef on new attributes by defining them -- cgit v1.2.3 From 1cf1d06e956dfbb05a7f69f64ab3c8938117eabe Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 28 Apr 2026 11:25:32 +0200 Subject: wifi: cfg80211: allow representing NPCA in chandef Add the necessary fields to the chandef data structure to represent NPCA (the NPCA primary channel and NPCA punctured/disabled subchannels bitmap), and the code to check these for validity, compatibility, as well as allowing it to be passed for AP mode for capable devices. Compatibility is assumed to only be the case when it's actually identical, enabling later management of this in channel contexts in mac80211 for multiple APs, but requiring userspace to set up the identical chandef on all AP interfaces that share a channel (and BSS color.) Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 235d7ae72e60..9998f6c0a665 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3162,6 +3162,9 @@ enum nl80211_commands { * encrypted over the air. Enhanced Privacy Protection (EPP), as defined * in IEEE P802.11bi/D4.0, mandates this encryption. * + * @NL80211_ATTR_NPCA_PRIMARY_FREQ: NPCA primary channel (u32) + * @NL80211_ATTR_NPCA_PUNCT_BITMAP: NPCA puncturing bitmap (u32) + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3757,6 +3760,9 @@ enum nl80211_attrs { NL80211_ATTR_ASSOC_ENCRYPTED, + NL80211_ATTR_NPCA_PRIMARY_FREQ, + NL80211_ATTR_NPCA_PUNCT_BITMAP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From a54f499838292c1768f6575ed1ec7cf35f1b6489 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christoph=20B=C3=B6hmwalder?= Date: Wed, 6 May 2026 14:45:40 +0200 Subject: drbd: move UAPI headers to include/uapi/linux/ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drbd.h and drbd_limits.h contain only type definitions, enums, and constants shared between kernel and userspace. These should be part of UAPI. Split the genl_api header into two: the genlmsghdr and the enums are UAPI, the rest stays there for now (it will be removed by one of the next commits in this series). drbd_config.h is clearly DRBD-internal, so move it there. Signed-off-by: Christoph Böhmwalder Acked-by: Jakub Kicinski Link: https://patch.msgid.link/20260506124541.1951772-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe --- include/uapi/linux/drbd.h | 432 +++++++++++++++++++++++++++++++++++++++ include/uapi/linux/drbd_limits.h | 251 +++++++++++++++++++++++ 2 files changed, 683 insertions(+) create mode 100644 include/uapi/linux/drbd.h create mode 100644 include/uapi/linux/drbd_limits.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/drbd.h b/include/uapi/linux/drbd.h new file mode 100644 index 000000000000..7930a972d8a4 --- /dev/null +++ b/include/uapi/linux/drbd.h @@ -0,0 +1,432 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */ +/* + drbd.h + Kernel module for 2.6.x Kernels + + This file is part of DRBD by Philipp Reisner and Lars Ellenberg. + + Copyright (C) 2001-2008, LINBIT Information Technologies GmbH. + Copyright (C) 2001-2008, Philipp Reisner . + Copyright (C) 2001-2008, Lars Ellenberg . + + +*/ +#ifndef DRBD_H +#define DRBD_H +#include + +#ifdef __KERNEL__ +#include +#include +#else +#include +#include +#include + +/* Although the Linux source code makes a difference between + generic endianness and the bitfields' endianness, there is no + architecture as of Linux-2.6.24-rc4 where the bitfields' endianness + does not match the generic endianness. */ + +#if __BYTE_ORDER == __LITTLE_ENDIAN +#define __LITTLE_ENDIAN_BITFIELD +#elif __BYTE_ORDER == __BIG_ENDIAN +#define __BIG_ENDIAN_BITFIELD +#else +# error "sorry, weird endianness on this box" +#endif + +#endif + +enum drbd_io_error_p { + EP_PASS_ON, /* FIXME should the better be named "Ignore"? */ + EP_CALL_HELPER, + EP_DETACH +}; + +enum drbd_fencing_p { + FP_NOT_AVAIL = -1, /* Not a policy */ + FP_DONT_CARE = 0, + FP_RESOURCE, + FP_STONITH +}; + +enum drbd_disconnect_p { + DP_RECONNECT, + DP_DROP_NET_CONF, + DP_FREEZE_IO +}; + +enum drbd_after_sb_p { + ASB_DISCONNECT, + ASB_DISCARD_YOUNGER_PRI, + ASB_DISCARD_OLDER_PRI, + ASB_DISCARD_ZERO_CHG, + ASB_DISCARD_LEAST_CHG, + ASB_DISCARD_LOCAL, + ASB_DISCARD_REMOTE, + ASB_CONSENSUS, + ASB_DISCARD_SECONDARY, + ASB_CALL_HELPER, + ASB_VIOLENTLY +}; + +enum drbd_on_no_data { + OND_IO_ERROR, + OND_SUSPEND_IO +}; + +enum drbd_on_congestion { + OC_BLOCK, + OC_PULL_AHEAD, + OC_DISCONNECT, +}; + +enum drbd_read_balancing { + RB_PREFER_LOCAL, + RB_PREFER_REMOTE, + RB_ROUND_ROBIN, + RB_LEAST_PENDING, + RB_CONGESTED_REMOTE, + RB_32K_STRIPING, + RB_64K_STRIPING, + RB_128K_STRIPING, + RB_256K_STRIPING, + RB_512K_STRIPING, + RB_1M_STRIPING, +}; + +/* KEEP the order, do not delete or insert. Only append. */ +enum drbd_ret_code { + ERR_CODE_BASE = 100, + NO_ERROR = 101, + ERR_LOCAL_ADDR = 102, + ERR_PEER_ADDR = 103, + ERR_OPEN_DISK = 104, + ERR_OPEN_MD_DISK = 105, + ERR_DISK_NOT_BDEV = 107, + ERR_MD_NOT_BDEV = 108, + ERR_DISK_TOO_SMALL = 111, + ERR_MD_DISK_TOO_SMALL = 112, + ERR_BDCLAIM_DISK = 114, + ERR_BDCLAIM_MD_DISK = 115, + ERR_MD_IDX_INVALID = 116, + ERR_IO_MD_DISK = 118, + ERR_MD_INVALID = 119, + ERR_AUTH_ALG = 120, + ERR_AUTH_ALG_ND = 121, + ERR_NOMEM = 122, + ERR_DISCARD_IMPOSSIBLE = 123, + ERR_DISK_CONFIGURED = 124, + ERR_NET_CONFIGURED = 125, + ERR_MANDATORY_TAG = 126, + ERR_MINOR_INVALID = 127, + ERR_INTR = 129, /* EINTR */ + ERR_RESIZE_RESYNC = 130, + ERR_NO_PRIMARY = 131, + ERR_RESYNC_AFTER = 132, + ERR_RESYNC_AFTER_CYCLE = 133, + ERR_PAUSE_IS_SET = 134, + ERR_PAUSE_IS_CLEAR = 135, + ERR_PACKET_NR = 137, + ERR_NO_DISK = 138, + ERR_NOT_PROTO_C = 139, + ERR_NOMEM_BITMAP = 140, + ERR_INTEGRITY_ALG = 141, /* DRBD 8.2 only */ + ERR_INTEGRITY_ALG_ND = 142, /* DRBD 8.2 only */ + ERR_CPU_MASK_PARSE = 143, /* DRBD 8.2 only */ + ERR_CSUMS_ALG = 144, /* DRBD 8.2 only */ + ERR_CSUMS_ALG_ND = 145, /* DRBD 8.2 only */ + ERR_VERIFY_ALG = 146, /* DRBD 8.2 only */ + ERR_VERIFY_ALG_ND = 147, /* DRBD 8.2 only */ + ERR_CSUMS_RESYNC_RUNNING= 148, /* DRBD 8.2 only */ + ERR_VERIFY_RUNNING = 149, /* DRBD 8.2 only */ + ERR_DATA_NOT_CURRENT = 150, + ERR_CONNECTED = 151, /* DRBD 8.3 only */ + ERR_PERM = 152, + ERR_NEED_APV_93 = 153, + ERR_STONITH_AND_PROT_A = 154, + ERR_CONG_NOT_PROTO_A = 155, + ERR_PIC_AFTER_DEP = 156, + ERR_PIC_PEER_DEP = 157, + ERR_RES_NOT_KNOWN = 158, + ERR_RES_IN_USE = 159, + ERR_MINOR_CONFIGURED = 160, + ERR_MINOR_OR_VOLUME_EXISTS = 161, + ERR_INVALID_REQUEST = 162, + ERR_NEED_APV_100 = 163, + ERR_NEED_ALLOW_TWO_PRI = 164, + ERR_MD_UNCLEAN = 165, + ERR_MD_LAYOUT_CONNECTED = 166, + ERR_MD_LAYOUT_TOO_BIG = 167, + ERR_MD_LAYOUT_TOO_SMALL = 168, + ERR_MD_LAYOUT_NO_FIT = 169, + ERR_IMPLICIT_SHRINK = 170, + /* insert new ones above this line */ + AFTER_LAST_ERR_CODE +}; + +#define DRBD_PROT_A 1 +#define DRBD_PROT_B 2 +#define DRBD_PROT_C 3 + +enum drbd_role { + R_UNKNOWN = 0, + R_PRIMARY = 1, /* role */ + R_SECONDARY = 2, /* role */ + R_MASK = 3, +}; + +/* The order of these constants is important. + * The lower ones (=C_WF_REPORT_PARAMS ==> There is a socket + */ +enum drbd_conns { + C_STANDALONE, + C_DISCONNECTING, /* Temporal state on the way to StandAlone. */ + C_UNCONNECTED, /* >= C_UNCONNECTED -> inc_net() succeeds */ + + /* These temporal states are all used on the way + * from >= C_CONNECTED to Unconnected. + * The 'disconnect reason' states + * I do not allow to change between them. */ + C_TIMEOUT, + C_BROKEN_PIPE, + C_NETWORK_FAILURE, + C_PROTOCOL_ERROR, + C_TEAR_DOWN, + + C_WF_CONNECTION, + C_WF_REPORT_PARAMS, /* we have a socket */ + C_CONNECTED, /* we have introduced each other */ + C_STARTING_SYNC_S, /* starting full sync by admin request. */ + C_STARTING_SYNC_T, /* starting full sync by admin request. */ + C_WF_BITMAP_S, + C_WF_BITMAP_T, + C_WF_SYNC_UUID, + + /* All SyncStates are tested with this comparison + * xx >= C_SYNC_SOURCE && xx <= C_PAUSED_SYNC_T */ + C_SYNC_SOURCE, + C_SYNC_TARGET, + C_VERIFY_S, + C_VERIFY_T, + C_PAUSED_SYNC_S, + C_PAUSED_SYNC_T, + + C_AHEAD, + C_BEHIND, + + C_MASK = 31 +}; + +enum drbd_disk_state { + D_DISKLESS, + D_ATTACHING, /* In the process of reading the meta-data */ + D_FAILED, /* Becomes D_DISKLESS as soon as we told it the peer */ + /* when >= D_FAILED it is legal to access mdev->ldev */ + D_NEGOTIATING, /* Late attaching state, we need to talk to the peer */ + D_INCONSISTENT, + D_OUTDATED, + D_UNKNOWN, /* Only used for the peer, never for myself */ + D_CONSISTENT, /* Might be D_OUTDATED, might be D_UP_TO_DATE ... */ + D_UP_TO_DATE, /* Only this disk state allows applications' IO ! */ + D_MASK = 15 +}; + +union drbd_state { +/* According to gcc's docs is the ... + * The order of allocation of bit-fields within a unit (C90 6.5.2.1, C99 6.7.2.1). + * Determined by ABI. + * pointed out by Maxim Uvarov q + * even though we transmit as "cpu_to_be32(state)", + * the offsets of the bitfields still need to be swapped + * on different endianness. + */ + struct { +#if defined(__LITTLE_ENDIAN_BITFIELD) + unsigned role:2 ; /* 3/4 primary/secondary/unknown */ + unsigned peer:2 ; /* 3/4 primary/secondary/unknown */ + unsigned conn:5 ; /* 17/32 cstates */ + unsigned disk:4 ; /* 8/16 from D_DISKLESS to D_UP_TO_DATE */ + unsigned pdsk:4 ; /* 8/16 from D_DISKLESS to D_UP_TO_DATE */ + unsigned susp:1 ; /* 2/2 IO suspended no/yes (by user) */ + unsigned aftr_isp:1 ; /* isp .. imposed sync pause */ + unsigned peer_isp:1 ; + unsigned user_isp:1 ; + unsigned susp_nod:1 ; /* IO suspended because no data */ + unsigned susp_fen:1 ; /* IO suspended because fence peer handler runs*/ + unsigned _pad:9; /* 0 unused */ +#elif defined(__BIG_ENDIAN_BITFIELD) + unsigned _pad:9; + unsigned susp_fen:1 ; + unsigned susp_nod:1 ; + unsigned user_isp:1 ; + unsigned peer_isp:1 ; + unsigned aftr_isp:1 ; /* isp .. imposed sync pause */ + unsigned susp:1 ; /* 2/2 IO suspended no/yes */ + unsigned pdsk:4 ; /* 8/16 from D_DISKLESS to D_UP_TO_DATE */ + unsigned disk:4 ; /* 8/16 from D_DISKLESS to D_UP_TO_DATE */ + unsigned conn:5 ; /* 17/32 cstates */ + unsigned peer:2 ; /* 3/4 primary/secondary/unknown */ + unsigned role:2 ; /* 3/4 primary/secondary/unknown */ +#else +# error "this endianness is not supported" +#endif + }; + unsigned int i; +}; + +enum drbd_state_rv { + SS_CW_NO_NEED = 4, + SS_CW_SUCCESS = 3, + SS_NOTHING_TO_DO = 2, + SS_SUCCESS = 1, + SS_UNKNOWN_ERROR = 0, /* Used to sleep longer in _drbd_request_state */ + SS_TWO_PRIMARIES = -1, + SS_NO_UP_TO_DATE_DISK = -2, + SS_NO_LOCAL_DISK = -4, + SS_NO_REMOTE_DISK = -5, + SS_CONNECTED_OUTDATES = -6, + SS_PRIMARY_NOP = -7, + SS_RESYNC_RUNNING = -8, + SS_ALREADY_STANDALONE = -9, + SS_CW_FAILED_BY_PEER = -10, + SS_IS_DISKLESS = -11, + SS_DEVICE_IN_USE = -12, + SS_NO_NET_CONFIG = -13, + SS_NO_VERIFY_ALG = -14, /* drbd-8.2 only */ + SS_NEED_CONNECTION = -15, /* drbd-8.2 only */ + SS_LOWER_THAN_OUTDATED = -16, + SS_NOT_SUPPORTED = -17, /* drbd-8.2 only */ + SS_IN_TRANSIENT_STATE = -18, /* Retry after the next state change */ + SS_CONCURRENT_ST_CHG = -19, /* Concurrent cluster side state change! */ + SS_O_VOL_PEER_PRI = -20, + SS_OUTDATE_WO_CONN = -21, + SS_AFTER_LAST_ERROR = -22, /* Keep this at bottom */ +}; + +#define SHARED_SECRET_MAX 64 + +#define MDF_CONSISTENT (1 << 0) +#define MDF_PRIMARY_IND (1 << 1) +#define MDF_CONNECTED_IND (1 << 2) +#define MDF_FULL_SYNC (1 << 3) +#define MDF_WAS_UP_TO_DATE (1 << 4) +#define MDF_PEER_OUT_DATED (1 << 5) +#define MDF_CRASHED_PRIMARY (1 << 6) +#define MDF_AL_CLEAN (1 << 7) +#define MDF_AL_DISABLED (1 << 8) + +#define MAX_PEERS 32 + +enum drbd_uuid_index { + UI_CURRENT, + UI_BITMAP, + UI_HISTORY_START, + UI_HISTORY_END, + UI_SIZE, /* nl-packet: number of dirty bits */ + UI_FLAGS, /* nl-packet: flags */ + UI_EXTENDED_SIZE /* Everything. */ +}; + +#define HISTORY_UUIDS MAX_PEERS + +enum drbd_timeout_flag { + UT_DEFAULT = 0, + UT_DEGRADED = 1, + UT_PEER_OUTDATED = 2, +}; + +enum drbd_notification_type { + NOTIFY_EXISTS, + NOTIFY_CREATE, + NOTIFY_CHANGE, + NOTIFY_DESTROY, + NOTIFY_CALL, + NOTIFY_RESPONSE, + + NOTIFY_CONTINUES = 0x8000, + NOTIFY_FLAGS = NOTIFY_CONTINUES, +}; + +enum drbd_peer_state { + P_INCONSISTENT = 3, + P_OUTDATED = 4, + P_DOWN = 5, + P_PRIMARY = 6, + P_FENCING = 7, +}; + +#define UUID_JUST_CREATED ((__u64)4) + +enum write_ordering_e { + WO_NONE, + WO_DRAIN_IO, + WO_BDEV_FLUSH, + WO_BIO_BARRIER +}; + +/* magic numbers used in meta data and network packets */ +#define DRBD_MAGIC 0x83740267 +#define DRBD_MAGIC_BIG 0x835a +#define DRBD_MAGIC_100 0x8620ec20 + +#define DRBD_MD_MAGIC_07 (DRBD_MAGIC+3) +#define DRBD_MD_MAGIC_08 (DRBD_MAGIC+4) +#define DRBD_MD_MAGIC_84_UNCLEAN (DRBD_MAGIC+5) + + +/* how I came up with this magic? + * base64 decode "actlog==" ;) */ +#define DRBD_AL_MAGIC 0x69cb65a2 + +/* these are of type "int" */ +#define DRBD_MD_INDEX_INTERNAL -1 +#define DRBD_MD_INDEX_FLEX_EXT -2 +#define DRBD_MD_INDEX_FLEX_INT -3 + +#define DRBD_CPU_MASK_SIZE 32 + +/** + * struct drbd_genlmsghdr - DRBD specific header used in NETLINK_GENERIC requests + * @minor: + * For admin requests (user -> kernel): which minor device to operate on. + * For (unicast) replies or informational (broadcast) messages + * (kernel -> user): which minor device the information is about. + * If we do not operate on minors, but on connections or resources, + * the minor value shall be (~0), and the attribute DRBD_NLA_CFG_CONTEXT + * is used instead. + * @flags: possible operation modifiers (relevant only for user->kernel): + * DRBD_GENL_F_SET_DEFAULTS + * @volume: + * When creating a new minor (adding it to a resource), the resource needs + * to know which volume number within the resource this is supposed to be. + * The volume number corresponds to the same volume number on the remote side, + * whereas the minor number on the remote side may be different + * (union with flags). + * @ret_code: kernel->userland unicast cfg reply return code (union with flags); + */ +struct drbd_genlmsghdr { + __u32 minor; + union { + __u32 flags; + __s32 ret_code; + }; +}; + +/* To be used in drbd_genlmsghdr.flags */ +enum { + DRBD_GENL_F_SET_DEFAULTS = 1, +}; + +enum drbd_state_info_bcast_reason { + SIB_GET_STATUS_REPLY = 1, + SIB_STATE_CHANGE = 2, + SIB_HELPER_PRE = 3, + SIB_HELPER_POST = 4, + SIB_SYNC_PROGRESS = 5, +}; + +#endif diff --git a/include/uapi/linux/drbd_limits.h b/include/uapi/linux/drbd_limits.h new file mode 100644 index 000000000000..a72a102d1ca7 --- /dev/null +++ b/include/uapi/linux/drbd_limits.h @@ -0,0 +1,251 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + drbd_limits.h + This file is part of DRBD by Philipp Reisner and Lars Ellenberg. +*/ + +/* + * Our current limitations. + * Some of them are hard limits, + * some of them are arbitrary range limits, that make it easier to provide + * feedback about nonsense settings for certain configurable values. + */ + +#ifndef DRBD_LIMITS_H +#define DRBD_LIMITS_H 1 + +#define DEBUG_RANGE_CHECK 0 + +#define DRBD_MINOR_COUNT_MIN 1U +#define DRBD_MINOR_COUNT_MAX 255U +#define DRBD_MINOR_COUNT_DEF 32U +#define DRBD_MINOR_COUNT_SCALE '1' + +#define DRBD_VOLUME_MAX 65534U + +#define DRBD_DIALOG_REFRESH_MIN 0U +#define DRBD_DIALOG_REFRESH_MAX 600U +#define DRBD_DIALOG_REFRESH_SCALE '1' + +/* valid port number */ +#define DRBD_PORT_MIN 1U +#define DRBD_PORT_MAX 0xffffU +#define DRBD_PORT_SCALE '1' + +/* startup { */ + /* if you want more than 3.4 days, disable */ +#define DRBD_WFC_TIMEOUT_MIN 0U +#define DRBD_WFC_TIMEOUT_MAX 300000U +#define DRBD_WFC_TIMEOUT_DEF 0U +#define DRBD_WFC_TIMEOUT_SCALE '1' + +#define DRBD_DEGR_WFC_TIMEOUT_MIN 0U +#define DRBD_DEGR_WFC_TIMEOUT_MAX 300000U +#define DRBD_DEGR_WFC_TIMEOUT_DEF 0U +#define DRBD_DEGR_WFC_TIMEOUT_SCALE '1' + +#define DRBD_OUTDATED_WFC_TIMEOUT_MIN 0U +#define DRBD_OUTDATED_WFC_TIMEOUT_MAX 300000U +#define DRBD_OUTDATED_WFC_TIMEOUT_DEF 0U +#define DRBD_OUTDATED_WFC_TIMEOUT_SCALE '1' +/* }*/ + +/* net { */ + /* timeout, unit centi seconds + * more than one minute timeout is not useful */ +#define DRBD_TIMEOUT_MIN 1U +#define DRBD_TIMEOUT_MAX 600U +#define DRBD_TIMEOUT_DEF 60U /* 6 seconds */ +#define DRBD_TIMEOUT_SCALE '1' + + /* If backing disk takes longer than disk_timeout, mark the disk as failed */ +#define DRBD_DISK_TIMEOUT_MIN 0U /* 0 = disabled */ +#define DRBD_DISK_TIMEOUT_MAX 6000U /* 10 Minutes */ +#define DRBD_DISK_TIMEOUT_DEF 0U /* disabled */ +#define DRBD_DISK_TIMEOUT_SCALE '1' + + /* active connection retries when C_WF_CONNECTION */ +#define DRBD_CONNECT_INT_MIN 1U +#define DRBD_CONNECT_INT_MAX 120U +#define DRBD_CONNECT_INT_DEF 10U /* seconds */ +#define DRBD_CONNECT_INT_SCALE '1' + + /* keep-alive probes when idle */ +#define DRBD_PING_INT_MIN 1U +#define DRBD_PING_INT_MAX 120U +#define DRBD_PING_INT_DEF 10U +#define DRBD_PING_INT_SCALE '1' + + /* timeout for the ping packets.*/ +#define DRBD_PING_TIMEO_MIN 1U +#define DRBD_PING_TIMEO_MAX 300U +#define DRBD_PING_TIMEO_DEF 5U +#define DRBD_PING_TIMEO_SCALE '1' + + /* max number of write requests between write barriers */ +#define DRBD_MAX_EPOCH_SIZE_MIN 1U +#define DRBD_MAX_EPOCH_SIZE_MAX 20000U +#define DRBD_MAX_EPOCH_SIZE_DEF 2048U +#define DRBD_MAX_EPOCH_SIZE_SCALE '1' + + /* I don't think that a tcp send buffer of more than 10M is useful */ +#define DRBD_SNDBUF_SIZE_MIN 0U +#define DRBD_SNDBUF_SIZE_MAX (10U<<20) +#define DRBD_SNDBUF_SIZE_DEF 0U +#define DRBD_SNDBUF_SIZE_SCALE '1' + +#define DRBD_RCVBUF_SIZE_MIN 0U +#define DRBD_RCVBUF_SIZE_MAX (10U<<20) +#define DRBD_RCVBUF_SIZE_DEF 0U +#define DRBD_RCVBUF_SIZE_SCALE '1' + + /* @4k PageSize -> 128kB - 512MB */ +#define DRBD_MAX_BUFFERS_MIN 32U +#define DRBD_MAX_BUFFERS_MAX 131072U +#define DRBD_MAX_BUFFERS_DEF 2048U +#define DRBD_MAX_BUFFERS_SCALE '1' + + /* @4k PageSize -> 4kB - 512MB */ +#define DRBD_UNPLUG_WATERMARK_MIN 1U +#define DRBD_UNPLUG_WATERMARK_MAX 131072U +#define DRBD_UNPLUG_WATERMARK_DEF (DRBD_MAX_BUFFERS_DEF/16) +#define DRBD_UNPLUG_WATERMARK_SCALE '1' + + /* 0 is disabled. + * 200 should be more than enough even for very short timeouts */ +#define DRBD_KO_COUNT_MIN 0U +#define DRBD_KO_COUNT_MAX 200U +#define DRBD_KO_COUNT_DEF 7U +#define DRBD_KO_COUNT_SCALE '1' +/* } */ + +/* syncer { */ + /* FIXME allow rate to be zero? */ +#define DRBD_RESYNC_RATE_MIN 1U +/* channel bonding 10 GbE, or other hardware */ +#define DRBD_RESYNC_RATE_MAX (4 << 20) +#define DRBD_RESYNC_RATE_DEF 250U +#define DRBD_RESYNC_RATE_SCALE 'k' /* kilobytes */ + +#define DRBD_AL_EXTENTS_MIN 67U + /* we use u16 as "slot number", (u16)~0 is "FREE". + * If you use >= 292 kB on-disk ring buffer, + * this is the maximum you can use: */ +#define DRBD_AL_EXTENTS_MAX 0xfffeU +#define DRBD_AL_EXTENTS_DEF 1237U +#define DRBD_AL_EXTENTS_SCALE '1' + +#define DRBD_MINOR_NUMBER_MIN -1 +#define DRBD_MINOR_NUMBER_MAX ((1 << 20) - 1) +#define DRBD_MINOR_NUMBER_DEF -1 +#define DRBD_MINOR_NUMBER_SCALE '1' + +/* } */ + +/* drbdsetup XY resize -d Z + * you are free to reduce the device size to nothing, if you want to. + * the upper limit with 64bit kernel, enough ram and flexible meta data + * is 1 PiB, currently. */ +/* DRBD_MAX_SECTORS */ +#define DRBD_DISK_SIZE_MIN 0LLU +#define DRBD_DISK_SIZE_MAX (1LLU * (2LLU << 40)) +#define DRBD_DISK_SIZE_DEF 0LLU /* = disabled = no user size... */ +#define DRBD_DISK_SIZE_SCALE 's' /* sectors */ + +#define DRBD_ON_IO_ERROR_DEF EP_DETACH +#define DRBD_FENCING_DEF FP_DONT_CARE +#define DRBD_AFTER_SB_0P_DEF ASB_DISCONNECT +#define DRBD_AFTER_SB_1P_DEF ASB_DISCONNECT +#define DRBD_AFTER_SB_2P_DEF ASB_DISCONNECT +#define DRBD_RR_CONFLICT_DEF ASB_DISCONNECT +#define DRBD_ON_NO_DATA_DEF OND_IO_ERROR +#define DRBD_ON_CONGESTION_DEF OC_BLOCK +#define DRBD_READ_BALANCING_DEF RB_PREFER_LOCAL + +#define DRBD_MAX_BIO_BVECS_MIN 0U +#define DRBD_MAX_BIO_BVECS_MAX 128U +#define DRBD_MAX_BIO_BVECS_DEF 0U +#define DRBD_MAX_BIO_BVECS_SCALE '1' + +#define DRBD_C_PLAN_AHEAD_MIN 0U +#define DRBD_C_PLAN_AHEAD_MAX 300U +#define DRBD_C_PLAN_AHEAD_DEF 20U +#define DRBD_C_PLAN_AHEAD_SCALE '1' + +#define DRBD_C_DELAY_TARGET_MIN 1U +#define DRBD_C_DELAY_TARGET_MAX 100U +#define DRBD_C_DELAY_TARGET_DEF 10U +#define DRBD_C_DELAY_TARGET_SCALE '1' + +#define DRBD_C_FILL_TARGET_MIN 0U +#define DRBD_C_FILL_TARGET_MAX (1U<<20) /* 500MByte in sec */ +#define DRBD_C_FILL_TARGET_DEF 100U /* Try to place 50KiB in socket send buffer during resync */ +#define DRBD_C_FILL_TARGET_SCALE 's' /* sectors */ + +#define DRBD_C_MAX_RATE_MIN 250U +#define DRBD_C_MAX_RATE_MAX (4U << 20) +#define DRBD_C_MAX_RATE_DEF 102400U +#define DRBD_C_MAX_RATE_SCALE 'k' /* kilobytes */ + +#define DRBD_C_MIN_RATE_MIN 0U +#define DRBD_C_MIN_RATE_MAX (4U << 20) +#define DRBD_C_MIN_RATE_DEF 250U +#define DRBD_C_MIN_RATE_SCALE 'k' /* kilobytes */ + +#define DRBD_CONG_FILL_MIN 0U +#define DRBD_CONG_FILL_MAX (10U<<21) /* 10GByte in sectors */ +#define DRBD_CONG_FILL_DEF 0U +#define DRBD_CONG_FILL_SCALE 's' /* sectors */ + +#define DRBD_CONG_EXTENTS_MIN DRBD_AL_EXTENTS_MIN +#define DRBD_CONG_EXTENTS_MAX DRBD_AL_EXTENTS_MAX +#define DRBD_CONG_EXTENTS_DEF DRBD_AL_EXTENTS_DEF +#define DRBD_CONG_EXTENTS_SCALE DRBD_AL_EXTENTS_SCALE + +#define DRBD_PROTOCOL_DEF DRBD_PROT_C + +#define DRBD_DISK_BARRIER_DEF 0U +#define DRBD_DISK_FLUSHES_DEF 1U +#define DRBD_DISK_DRAIN_DEF 1U +#define DRBD_MD_FLUSHES_DEF 1U +#define DRBD_TCP_CORK_DEF 1U +#define DRBD_AL_UPDATES_DEF 1U + +/* We used to ignore the discard_zeroes_data setting. + * To not change established (and expected) behaviour, + * by default assume that, for discard_zeroes_data=0, + * we can make that an effective discard_zeroes_data=1, + * if we only explicitly zero-out unaligned partial chunks. */ +#define DRBD_DISCARD_ZEROES_IF_ALIGNED_DEF 1U + +/* Some backends pretend to support WRITE SAME, + * but fail such requests when they are actually submitted. + * This is to tell DRBD to not even try. */ +#define DRBD_DISABLE_WRITE_SAME_DEF 0U + +#define DRBD_ALLOW_TWO_PRIMARIES_DEF 0U +#define DRBD_ALWAYS_ASBP_DEF 0U +#define DRBD_USE_RLE_DEF 1U +#define DRBD_CSUMS_AFTER_CRASH_ONLY_DEF 0U + +#define DRBD_AL_STRIPES_MIN 1U +#define DRBD_AL_STRIPES_MAX 1024U +#define DRBD_AL_STRIPES_DEF 1U +#define DRBD_AL_STRIPES_SCALE '1' + +#define DRBD_AL_STRIPE_SIZE_MIN 4U +#define DRBD_AL_STRIPE_SIZE_MAX 16777216U +#define DRBD_AL_STRIPE_SIZE_DEF 32U +#define DRBD_AL_STRIPE_SIZE_SCALE 'k' /* kilobytes */ + +#define DRBD_SOCKET_CHECK_TIMEO_MIN 0U +#define DRBD_SOCKET_CHECK_TIMEO_MAX DRBD_PING_TIMEO_MAX +#define DRBD_SOCKET_CHECK_TIMEO_DEF 0U +#define DRBD_SOCKET_CHECK_TIMEO_SCALE '1' + +#define DRBD_RS_DISCARD_GRANULARITY_MIN 0U +#define DRBD_RS_DISCARD_GRANULARITY_MAX (1U<<20) /* 1MiByte */ +#define DRBD_RS_DISCARD_GRANULARITY_DEF 0U /* disabled by default */ +#define DRBD_RS_DISCARD_GRANULARITY_SCALE '1' /* bytes */ + +#endif -- cgit v1.2.3 From 8098eeb693c4cc4e774c62fbd4875197cb5578ce Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christoph=20B=C3=B6hmwalder?= Date: Wed, 6 May 2026 14:45:41 +0200 Subject: drbd: replace genl_magic with explicit netlink serialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace the genl_magic multi-include macro system with explicit serialization and parsing. The *_gen files were initially produced from a YNL spec via a customized ynl-gen-c, but the DRBD netlink family is effectively frozen, so the generator is kept unmodified. All new functionality will land in a separate, properly-designed family. Carry the resulting code as ordinary in-tree source rather than landing the spec and generator changes that produced it. The bulk of the changes are mechanical renames to fit the YNL naming conventions: - Handler functions: drbd_adm_* -> drbd_nl_*_doit/dumpit - GENL_MAGIC_VERSION -> DRBD_FAMILY_VERSION - GENL_MAGIC_FAMILY_HDRSZ -> sizeof(struct drbd_genlmsghdr) - drbd_genl_family -> drbd_nl_family - Attribute IDs: T_* -> DRBD_A_* Remove the nested_attr_tb static global buffer and move to a per-call allocation approach: each deserialization manages its own nested attribute table. This will be needed anyway when we eventually move to parallel_ops, and it's actually simpler this way, so make the move now. Replace the functionality of the "sensitive" flag: this was only used by a single field (shared_secret); open-code redaction logic for that locally. Also replace the "invariant" flag: this only had a couple of users, and those basically never change. Hard code the check directly inline. The genl_family struct itself is defined manually in drbd_nl.c. Also replace a couple of drbd-specific wrappers (nla_put_u64_0pad, drbd_nla_find_nested) with standard kernel functions while we're at it. Finally, completely remove the genl_magic system; DRBD was its only user. Signed-off-by: Christoph Böhmwalder Acked-by: Jakub Kicinski Link: https://patch.msgid.link/20260506124541.1951772-3-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe --- include/uapi/linux/drbd.h | 3 + include/uapi/linux/drbd_genl.h | 359 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 362 insertions(+) create mode 100644 include/uapi/linux/drbd_genl.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/drbd.h b/include/uapi/linux/drbd.h index 7930a972d8a4..5d4d677cf1ad 100644 --- a/include/uapi/linux/drbd.h +++ b/include/uapi/linux/drbd.h @@ -333,6 +333,9 @@ enum drbd_uuid_index { #define HISTORY_UUIDS MAX_PEERS +#define DRBD_NL_UUIDS_SIZE (UI_SIZE * sizeof(__u64)) +#define DRBD_NL_HISTORY_UUIDS_SIZE (HISTORY_UUIDS * sizeof(__u64)) + enum drbd_timeout_flag { UT_DEFAULT = 0, UT_DEGRADED = 1, diff --git a/include/uapi/linux/drbd_genl.h b/include/uapi/linux/drbd_genl.h new file mode 100644 index 000000000000..8b25f08d8a90 --- /dev/null +++ b/include/uapi/linux/drbd_genl.h @@ -0,0 +1,359 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ + +#ifndef _UAPI_LINUX_DRBD_GENL_H +#define _UAPI_LINUX_DRBD_GENL_H + +#define DRBD_FAMILY_NAME "drbd" +#define DRBD_FAMILY_VERSION 1 + +enum { + DRBD_NLA_CFG_REPLY = 1, + DRBD_NLA_CFG_CONTEXT, + DRBD_NLA_DISK_CONF, + DRBD_NLA_RESOURCE_OPTS, + DRBD_NLA_NET_CONF, + DRBD_NLA_SET_ROLE_PARMS, + DRBD_NLA_RESIZE_PARMS, + DRBD_NLA_STATE_INFO, + DRBD_NLA_START_OV_PARMS, + DRBD_NLA_NEW_C_UUID_PARMS, + DRBD_NLA_TIMEOUT_PARMS, + DRBD_NLA_DISCONNECT_PARMS, + DRBD_NLA_DETACH_PARMS, + DRBD_NLA_RESOURCE_INFO = 15, + DRBD_NLA_DEVICE_INFO, + DRBD_NLA_CONNECTION_INFO, + DRBD_NLA_PEER_DEVICE_INFO, + DRBD_NLA_RESOURCE_STATISTICS, + DRBD_NLA_DEVICE_STATISTICS, + DRBD_NLA_CONNECTION_STATISTICS, + DRBD_NLA_PEER_DEVICE_STATISTICS, + DRBD_NLA_NOTIFICATION_HEADER, + DRBD_NLA_HELPER, + + __DRBD_NLA_MAX, + DRBD_NLA_MAX = (__DRBD_NLA_MAX - 1) +}; + +enum { + DRBD_A_DRBD_CFG_REPLY_INFO_TEXT = 1, + + __DRBD_A_DRBD_CFG_REPLY_MAX, + DRBD_A_DRBD_CFG_REPLY_MAX = (__DRBD_A_DRBD_CFG_REPLY_MAX - 1) +}; + +enum { + DRBD_A_DRBD_CFG_CONTEXT_CTX_VOLUME = 1, + DRBD_A_DRBD_CFG_CONTEXT_CTX_RESOURCE_NAME, + DRBD_A_DRBD_CFG_CONTEXT_CTX_MY_ADDR, + DRBD_A_DRBD_CFG_CONTEXT_CTX_PEER_ADDR, + + __DRBD_A_DRBD_CFG_CONTEXT_MAX, + DRBD_A_DRBD_CFG_CONTEXT_MAX = (__DRBD_A_DRBD_CFG_CONTEXT_MAX - 1) +}; + +enum { + DRBD_A_DISK_CONF_BACKING_DEV = 1, + DRBD_A_DISK_CONF_META_DEV, + DRBD_A_DISK_CONF_META_DEV_IDX, + DRBD_A_DISK_CONF_DISK_SIZE, + DRBD_A_DISK_CONF_MAX_BIO_BVECS, + DRBD_A_DISK_CONF_ON_IO_ERROR, + DRBD_A_DISK_CONF_FENCING, + DRBD_A_DISK_CONF_RESYNC_RATE, + DRBD_A_DISK_CONF_RESYNC_AFTER, + DRBD_A_DISK_CONF_AL_EXTENTS, + DRBD_A_DISK_CONF_C_PLAN_AHEAD, + DRBD_A_DISK_CONF_C_DELAY_TARGET, + DRBD_A_DISK_CONF_C_FILL_TARGET, + DRBD_A_DISK_CONF_C_MAX_RATE, + DRBD_A_DISK_CONF_C_MIN_RATE, + DRBD_A_DISK_CONF_DISK_BARRIER, + DRBD_A_DISK_CONF_DISK_FLUSHES, + DRBD_A_DISK_CONF_DISK_DRAIN, + DRBD_A_DISK_CONF_MD_FLUSHES, + DRBD_A_DISK_CONF_DISK_TIMEOUT, + DRBD_A_DISK_CONF_READ_BALANCING, + DRBD_A_DISK_CONF_AL_UPDATES = 23, + DRBD_A_DISK_CONF_DISCARD_ZEROES_IF_ALIGNED, + DRBD_A_DISK_CONF_RS_DISCARD_GRANULARITY, + DRBD_A_DISK_CONF_DISABLE_WRITE_SAME, + + __DRBD_A_DISK_CONF_MAX, + DRBD_A_DISK_CONF_MAX = (__DRBD_A_DISK_CONF_MAX - 1) +}; + +enum { + DRBD_A_RES_OPTS_CPU_MASK = 1, + DRBD_A_RES_OPTS_ON_NO_DATA, + + __DRBD_A_RES_OPTS_MAX, + DRBD_A_RES_OPTS_MAX = (__DRBD_A_RES_OPTS_MAX - 1) +}; + +enum { + DRBD_A_NET_CONF_SHARED_SECRET = 1, + DRBD_A_NET_CONF_CRAM_HMAC_ALG, + DRBD_A_NET_CONF_INTEGRITY_ALG, + DRBD_A_NET_CONF_VERIFY_ALG, + DRBD_A_NET_CONF_CSUMS_ALG, + DRBD_A_NET_CONF_WIRE_PROTOCOL, + DRBD_A_NET_CONF_CONNECT_INT, + DRBD_A_NET_CONF_TIMEOUT, + DRBD_A_NET_CONF_PING_INT, + DRBD_A_NET_CONF_PING_TIMEO, + DRBD_A_NET_CONF_SNDBUF_SIZE, + DRBD_A_NET_CONF_RCVBUF_SIZE, + DRBD_A_NET_CONF_KO_COUNT, + DRBD_A_NET_CONF_MAX_BUFFERS, + DRBD_A_NET_CONF_MAX_EPOCH_SIZE, + DRBD_A_NET_CONF_UNPLUG_WATERMARK, + DRBD_A_NET_CONF_AFTER_SB_0P, + DRBD_A_NET_CONF_AFTER_SB_1P, + DRBD_A_NET_CONF_AFTER_SB_2P, + DRBD_A_NET_CONF_RR_CONFLICT, + DRBD_A_NET_CONF_ON_CONGESTION, + DRBD_A_NET_CONF_CONG_FILL, + DRBD_A_NET_CONF_CONG_EXTENTS, + DRBD_A_NET_CONF_TWO_PRIMARIES, + DRBD_A_NET_CONF_DISCARD_MY_DATA, + DRBD_A_NET_CONF_TCP_CORK, + DRBD_A_NET_CONF_ALWAYS_ASBP, + DRBD_A_NET_CONF_TENTATIVE, + DRBD_A_NET_CONF_USE_RLE, + DRBD_A_NET_CONF_CSUMS_AFTER_CRASH_ONLY = 33, + DRBD_A_NET_CONF_SOCK_CHECK_TIMEO, + + __DRBD_A_NET_CONF_MAX, + DRBD_A_NET_CONF_MAX = (__DRBD_A_NET_CONF_MAX - 1) +}; + +enum { + DRBD_A_SET_ROLE_PARMS_ASSUME_UPTODATE = 1, + + __DRBD_A_SET_ROLE_PARMS_MAX, + DRBD_A_SET_ROLE_PARMS_MAX = (__DRBD_A_SET_ROLE_PARMS_MAX - 1) +}; + +enum { + DRBD_A_RESIZE_PARMS_RESIZE_SIZE = 1, + DRBD_A_RESIZE_PARMS_RESIZE_FORCE, + DRBD_A_RESIZE_PARMS_NO_RESYNC, + DRBD_A_RESIZE_PARMS_AL_STRIPES, + DRBD_A_RESIZE_PARMS_AL_STRIPE_SIZE, + + __DRBD_A_RESIZE_PARMS_MAX, + DRBD_A_RESIZE_PARMS_MAX = (__DRBD_A_RESIZE_PARMS_MAX - 1) +}; + +enum { + DRBD_A_STATE_INFO_SIB_REASON = 1, + DRBD_A_STATE_INFO_CURRENT_STATE, + DRBD_A_STATE_INFO_CAPACITY, + DRBD_A_STATE_INFO_ED_UUID, + DRBD_A_STATE_INFO_PREV_STATE, + DRBD_A_STATE_INFO_NEW_STATE, + DRBD_A_STATE_INFO_UUIDS, + DRBD_A_STATE_INFO_DISK_FLAGS, + DRBD_A_STATE_INFO_BITS_TOTAL, + DRBD_A_STATE_INFO_BITS_OOS, + DRBD_A_STATE_INFO_BITS_RS_TOTAL, + DRBD_A_STATE_INFO_BITS_RS_FAILED, + DRBD_A_STATE_INFO_HELPER, + DRBD_A_STATE_INFO_HELPER_EXIT_CODE, + DRBD_A_STATE_INFO_SEND_CNT, + DRBD_A_STATE_INFO_RECV_CNT, + DRBD_A_STATE_INFO_READ_CNT, + DRBD_A_STATE_INFO_WRIT_CNT, + DRBD_A_STATE_INFO_AL_WRIT_CNT, + DRBD_A_STATE_INFO_BM_WRIT_CNT, + DRBD_A_STATE_INFO_AP_BIO_CNT, + DRBD_A_STATE_INFO_AP_PENDING_CNT, + DRBD_A_STATE_INFO_RS_PENDING_CNT, + + __DRBD_A_STATE_INFO_MAX, + DRBD_A_STATE_INFO_MAX = (__DRBD_A_STATE_INFO_MAX - 1) +}; + +enum { + DRBD_A_START_OV_PARMS_OV_START_SECTOR = 1, + DRBD_A_START_OV_PARMS_OV_STOP_SECTOR, + + __DRBD_A_START_OV_PARMS_MAX, + DRBD_A_START_OV_PARMS_MAX = (__DRBD_A_START_OV_PARMS_MAX - 1) +}; + +enum { + DRBD_A_NEW_C_UUID_PARMS_CLEAR_BM = 1, + + __DRBD_A_NEW_C_UUID_PARMS_MAX, + DRBD_A_NEW_C_UUID_PARMS_MAX = (__DRBD_A_NEW_C_UUID_PARMS_MAX - 1) +}; + +enum { + DRBD_A_TIMEOUT_PARMS_TIMEOUT_TYPE = 1, + + __DRBD_A_TIMEOUT_PARMS_MAX, + DRBD_A_TIMEOUT_PARMS_MAX = (__DRBD_A_TIMEOUT_PARMS_MAX - 1) +}; + +enum { + DRBD_A_DISCONNECT_PARMS_FORCE_DISCONNECT = 1, + + __DRBD_A_DISCONNECT_PARMS_MAX, + DRBD_A_DISCONNECT_PARMS_MAX = (__DRBD_A_DISCONNECT_PARMS_MAX - 1) +}; + +enum { + DRBD_A_DETACH_PARMS_FORCE_DETACH = 1, + + __DRBD_A_DETACH_PARMS_MAX, + DRBD_A_DETACH_PARMS_MAX = (__DRBD_A_DETACH_PARMS_MAX - 1) +}; + +enum { + DRBD_A_RESOURCE_INFO_RES_ROLE = 1, + DRBD_A_RESOURCE_INFO_RES_SUSP, + DRBD_A_RESOURCE_INFO_RES_SUSP_NOD, + DRBD_A_RESOURCE_INFO_RES_SUSP_FEN, + + __DRBD_A_RESOURCE_INFO_MAX, + DRBD_A_RESOURCE_INFO_MAX = (__DRBD_A_RESOURCE_INFO_MAX - 1) +}; + +enum { + DRBD_A_DEVICE_INFO_DEV_DISK_STATE = 1, + + __DRBD_A_DEVICE_INFO_MAX, + DRBD_A_DEVICE_INFO_MAX = (__DRBD_A_DEVICE_INFO_MAX - 1) +}; + +enum { + DRBD_A_CONNECTION_INFO_CONN_CONNECTION_STATE = 1, + DRBD_A_CONNECTION_INFO_CONN_ROLE, + + __DRBD_A_CONNECTION_INFO_MAX, + DRBD_A_CONNECTION_INFO_MAX = (__DRBD_A_CONNECTION_INFO_MAX - 1) +}; + +enum { + DRBD_A_PEER_DEVICE_INFO_PEER_REPL_STATE = 1, + DRBD_A_PEER_DEVICE_INFO_PEER_DISK_STATE, + DRBD_A_PEER_DEVICE_INFO_PEER_RESYNC_SUSP_USER, + DRBD_A_PEER_DEVICE_INFO_PEER_RESYNC_SUSP_PEER, + DRBD_A_PEER_DEVICE_INFO_PEER_RESYNC_SUSP_DEPENDENCY, + + __DRBD_A_PEER_DEVICE_INFO_MAX, + DRBD_A_PEER_DEVICE_INFO_MAX = (__DRBD_A_PEER_DEVICE_INFO_MAX - 1) +}; + +enum { + DRBD_A_RESOURCE_STATISTICS_RES_STAT_WRITE_ORDERING = 1, + + __DRBD_A_RESOURCE_STATISTICS_MAX, + DRBD_A_RESOURCE_STATISTICS_MAX = (__DRBD_A_RESOURCE_STATISTICS_MAX - 1) +}; + +enum { + DRBD_A_DEVICE_STATISTICS_DEV_SIZE = 1, + DRBD_A_DEVICE_STATISTICS_DEV_READ, + DRBD_A_DEVICE_STATISTICS_DEV_WRITE, + DRBD_A_DEVICE_STATISTICS_DEV_AL_WRITES, + DRBD_A_DEVICE_STATISTICS_DEV_BM_WRITES, + DRBD_A_DEVICE_STATISTICS_DEV_UPPER_PENDING, + DRBD_A_DEVICE_STATISTICS_DEV_LOWER_PENDING, + DRBD_A_DEVICE_STATISTICS_DEV_UPPER_BLOCKED, + DRBD_A_DEVICE_STATISTICS_DEV_LOWER_BLOCKED, + DRBD_A_DEVICE_STATISTICS_DEV_AL_SUSPENDED, + DRBD_A_DEVICE_STATISTICS_DEV_EXPOSED_DATA_UUID, + DRBD_A_DEVICE_STATISTICS_DEV_CURRENT_UUID, + DRBD_A_DEVICE_STATISTICS_DEV_DISK_FLAGS, + DRBD_A_DEVICE_STATISTICS_HISTORY_UUIDS, + + __DRBD_A_DEVICE_STATISTICS_MAX, + DRBD_A_DEVICE_STATISTICS_MAX = (__DRBD_A_DEVICE_STATISTICS_MAX - 1) +}; + +enum { + DRBD_A_CONNECTION_STATISTICS_CONN_CONGESTED = 1, + + __DRBD_A_CONNECTION_STATISTICS_MAX, + DRBD_A_CONNECTION_STATISTICS_MAX = (__DRBD_A_CONNECTION_STATISTICS_MAX - 1) +}; + +enum { + DRBD_A_PEER_DEVICE_STATISTICS_PEER_DEV_RECEIVED = 1, + DRBD_A_PEER_DEVICE_STATISTICS_PEER_DEV_SENT, + DRBD_A_PEER_DEVICE_STATISTICS_PEER_DEV_PENDING, + DRBD_A_PEER_DEVICE_STATISTICS_PEER_DEV_UNACKED, + DRBD_A_PEER_DEVICE_STATISTICS_PEER_DEV_OUT_OF_SYNC, + DRBD_A_PEER_DEVICE_STATISTICS_PEER_DEV_RESYNC_FAILED, + DRBD_A_PEER_DEVICE_STATISTICS_PEER_DEV_BITMAP_UUID, + DRBD_A_PEER_DEVICE_STATISTICS_PEER_DEV_FLAGS = 9, + + __DRBD_A_PEER_DEVICE_STATISTICS_MAX, + DRBD_A_PEER_DEVICE_STATISTICS_MAX = (__DRBD_A_PEER_DEVICE_STATISTICS_MAX - 1) +}; + +enum { + DRBD_A_DRBD_NOTIFICATION_HEADER_NH_TYPE = 1, + + __DRBD_A_DRBD_NOTIFICATION_HEADER_MAX, + DRBD_A_DRBD_NOTIFICATION_HEADER_MAX = (__DRBD_A_DRBD_NOTIFICATION_HEADER_MAX - 1) +}; + +enum { + DRBD_A_DRBD_HELPER_INFO_HELPER_NAME = 1, + DRBD_A_DRBD_HELPER_INFO_HELPER_STATUS, + + __DRBD_A_DRBD_HELPER_INFO_MAX, + DRBD_A_DRBD_HELPER_INFO_MAX = (__DRBD_A_DRBD_HELPER_INFO_MAX - 1) +}; + +enum { + DRBD_ADM_EVENT = 1, + DRBD_ADM_GET_STATUS, + DRBD_ADM_NEW_MINOR = 5, + DRBD_ADM_DEL_MINOR, + DRBD_ADM_NEW_RESOURCE, + DRBD_ADM_DEL_RESOURCE, + DRBD_ADM_RESOURCE_OPTS, + DRBD_ADM_CONNECT, + DRBD_ADM_DISCONNECT, + DRBD_ADM_ATTACH, + DRBD_ADM_RESIZE, + DRBD_ADM_PRIMARY, + DRBD_ADM_SECONDARY, + DRBD_ADM_NEW_C_UUID, + DRBD_ADM_START_OV, + DRBD_ADM_DETACH, + DRBD_ADM_INVALIDATE, + DRBD_ADM_INVAL_PEER, + DRBD_ADM_PAUSE_SYNC, + DRBD_ADM_RESUME_SYNC, + DRBD_ADM_SUSPEND_IO, + DRBD_ADM_RESUME_IO, + DRBD_ADM_OUTDATE, + DRBD_ADM_GET_TIMEOUT_TYPE, + DRBD_ADM_DOWN, + DRBD_ADM_CHG_DISK_OPTS, + DRBD_ADM_CHG_NET_OPTS, + DRBD_ADM_GET_RESOURCES, + DRBD_ADM_GET_DEVICES, + DRBD_ADM_GET_CONNECTIONS, + DRBD_ADM_GET_PEER_DEVICES, + DRBD_ADM_RESOURCE_STATE, + DRBD_ADM_DEVICE_STATE, + DRBD_ADM_CONNECTION_STATE, + DRBD_ADM_PEER_DEVICE_STATE, + DRBD_ADM_GET_INITIAL_STATE, + DRBD_ADM_HELPER = 40, + DRBD_ADM_INITIAL_STATE_DONE, + + __DRBD_ADM_MAX, + DRBD_ADM_MAX = (__DRBD_ADM_MAX - 1) +}; + +#define DRBD_MCGRP_EVENTS "events" + +#endif /* _UAPI_LINUX_DRBD_GENL_H */ -- cgit v1.2.3 From 3035e4454142327ec5faee2ff57ab7cb1e9fc712 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 7 May 2026 04:52:55 -0400 Subject: fs: Add case sensitivity flags to file_kattr Enable upper layers such as NFSD to retrieve case sensitivity information from file systems by adding FS_XFLAG_CASEFOLD and FS_XFLAG_CASENONPRESERVING flags. Filesystems report case-insensitive or case-nonpreserving behavior by setting these flags directly in fa->fsx_xflags. The default (flags unset) indicates POSIX semantics: case-sensitive and case-preserving. Both flags are added to FS_XFLAG_RDONLY_MASK so FS_IOC_FSSETXATTR silently strips them, keeping the new xflags strictly a reporting interface. Callers that want to toggle casefolding continue to use FS_IOC_SETFLAGS with FS_CASEFOLD_FL, the established UAPI on filesystems that support the operation (ext4 and f2fs on empty directories). Case sensitivity information is exported to userspace via the fa_xflags field in the FS_IOC_FSGETXATTR ioctl and file_getattr() system call. Reviewed-by: "Darrick J. Wong" Reviewed-by: Jan Kara Reviewed-by: Roland Mainz Signed-off-by: Chuck Lever Link: https://patch.msgid.link/20260507-case-sensitivity-v14-2-e62cc8200435@oracle.com Signed-off-by: Christian Brauner --- include/uapi/linux/fs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 13f71202845e..2ea4c81df08f 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -254,6 +254,13 @@ struct file_attr { #define FS_XFLAG_DAX 0x00008000 /* use DAX for IO */ #define FS_XFLAG_COWEXTSIZE 0x00010000 /* CoW extent size allocator hint */ #define FS_XFLAG_VERITY 0x00020000 /* fs-verity enabled */ +/* + * Case handling flags (read-only, cannot be set via ioctl). + * Default (neither set) indicates POSIX semantics: case-sensitive + * lookups and case-preserving storage. + */ +#define FS_XFLAG_CASEFOLD 0x00040000 /* case-insensitive lookups */ +#define FS_XFLAG_CASENONPRESERVING 0x00080000 /* case not preserved */ #define FS_XFLAG_HASATTR 0x80000000 /* no DIFLAG for this */ /* the read-only stuff doesn't really belong here, but any other place is -- cgit v1.2.3 From 61848e9799f2543a3ea144e277b17aaec9707566 Mon Sep 17 00:00:00 2001 From: Ethan Nelson-Moore Date: Sun, 3 May 2026 20:14:53 -0700 Subject: tty: synclink_gt: remove broken driver The synclink_gt driver was marked as broken in commit 426263d5fb40 ("tty: synclink_gt: mark as BROKEN") in July 2023 because it had severe structural problems and there had been no evidence of users since 2016. Since then, no meaningful improvements have been made to the driver, and it is unlikely that will ever happen due to the lack of interest. Drop the driver and references to it in comments and documentation. include/uapi/linux/synclink.h is also removed. The only use of this header I have found is the linux-raw-sys Rust crate. It generates bindings for all UAPI headers, but has a hardcoded list of headers and ioctls, including this one, so that does not indicate that anyone is using it. I have sent a pull request to remove the include and ioctl definitions for this header (see the link below). Link: https://github.com/sunfishcode/linux-raw-sys/pull/185 Signed-off-by: Ethan Nelson-Moore Acked-by: Jakub Kicinski Link: https://patch.msgid.link/20260504031519.18877-1-enelsonmoore@gmail.com Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/synclink.h | 301 ------------------------------------------ 1 file changed, 301 deletions(-) delete mode 100644 include/uapi/linux/synclink.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/synclink.h b/include/uapi/linux/synclink.h deleted file mode 100644 index 62f32d4e1021..000000000000 --- a/include/uapi/linux/synclink.h +++ /dev/null @@ -1,301 +0,0 @@ -/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ -/* - * SyncLink Multiprotocol Serial Adapter Driver - * - * $Id: synclink.h,v 3.14 2006/07/17 20:15:43 paulkf Exp $ - * - * Copyright (C) 1998-2000 by Microgate Corporation - * - * Redistribution of this file is permitted under - * the terms of the GNU Public License (GPL) - */ - -#ifndef _UAPI_SYNCLINK_H_ -#define _UAPI_SYNCLINK_H_ -#define SYNCLINK_H_VERSION 3.6 - -#include - -#define BIT0 0x0001 -#define BIT1 0x0002 -#define BIT2 0x0004 -#define BIT3 0x0008 -#define BIT4 0x0010 -#define BIT5 0x0020 -#define BIT6 0x0040 -#define BIT7 0x0080 -#define BIT8 0x0100 -#define BIT9 0x0200 -#define BIT10 0x0400 -#define BIT11 0x0800 -#define BIT12 0x1000 -#define BIT13 0x2000 -#define BIT14 0x4000 -#define BIT15 0x8000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - - -#define HDLC_MAX_FRAME_SIZE 65535 -#define MAX_ASYNC_TRANSMIT 4096 -#define MAX_ASYNC_BUFFER_SIZE 4096 - -#define ASYNC_PARITY_NONE 0 -#define ASYNC_PARITY_EVEN 1 -#define ASYNC_PARITY_ODD 2 -#define ASYNC_PARITY_SPACE 3 - -#define HDLC_FLAG_UNDERRUN_ABORT7 0x0000 -#define HDLC_FLAG_UNDERRUN_ABORT15 0x0001 -#define HDLC_FLAG_UNDERRUN_FLAG 0x0002 -#define HDLC_FLAG_UNDERRUN_CRC 0x0004 -#define HDLC_FLAG_SHARE_ZERO 0x0010 -#define HDLC_FLAG_AUTO_CTS 0x0020 -#define HDLC_FLAG_AUTO_DCD 0x0040 -#define HDLC_FLAG_AUTO_RTS 0x0080 -#define HDLC_FLAG_RXC_DPLL 0x0100 -#define HDLC_FLAG_RXC_BRG 0x0200 -#define HDLC_FLAG_RXC_TXCPIN 0x8000 -#define HDLC_FLAG_RXC_RXCPIN 0x0000 -#define HDLC_FLAG_TXC_DPLL 0x0400 -#define HDLC_FLAG_TXC_BRG 0x0800 -#define HDLC_FLAG_TXC_TXCPIN 0x0000 -#define HDLC_FLAG_TXC_RXCPIN 0x0008 -#define HDLC_FLAG_DPLL_DIV8 0x1000 -#define HDLC_FLAG_DPLL_DIV16 0x2000 -#define HDLC_FLAG_DPLL_DIV32 0x0000 -#define HDLC_FLAG_HDLC_LOOPMODE 0x4000 - -#define HDLC_CRC_NONE 0 -#define HDLC_CRC_16_CCITT 1 -#define HDLC_CRC_32_CCITT 2 -#define HDLC_CRC_MASK 0x00ff -#define HDLC_CRC_RETURN_EX 0x8000 - -#define RX_OK 0 -#define RX_CRC_ERROR 1 - -#define HDLC_TXIDLE_FLAGS 0 -#define HDLC_TXIDLE_ALT_ZEROS_ONES 1 -#define HDLC_TXIDLE_ZEROS 2 -#define HDLC_TXIDLE_ONES 3 -#define HDLC_TXIDLE_ALT_MARK_SPACE 4 -#define HDLC_TXIDLE_SPACE 5 -#define HDLC_TXIDLE_MARK 6 -#define HDLC_TXIDLE_CUSTOM_8 0x10000000 -#define HDLC_TXIDLE_CUSTOM_16 0x20000000 - -#define HDLC_ENCODING_NRZ 0 -#define HDLC_ENCODING_NRZB 1 -#define HDLC_ENCODING_NRZI_MARK 2 -#define HDLC_ENCODING_NRZI_SPACE 3 -#define HDLC_ENCODING_NRZI HDLC_ENCODING_NRZI_SPACE -#define HDLC_ENCODING_BIPHASE_MARK 4 -#define HDLC_ENCODING_BIPHASE_SPACE 5 -#define HDLC_ENCODING_BIPHASE_LEVEL 6 -#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL 7 - -#define HDLC_PREAMBLE_LENGTH_8BITS 0 -#define HDLC_PREAMBLE_LENGTH_16BITS 1 -#define HDLC_PREAMBLE_LENGTH_32BITS 2 -#define HDLC_PREAMBLE_LENGTH_64BITS 3 - -#define HDLC_PREAMBLE_PATTERN_NONE 0 -#define HDLC_PREAMBLE_PATTERN_ZEROS 1 -#define HDLC_PREAMBLE_PATTERN_FLAGS 2 -#define HDLC_PREAMBLE_PATTERN_10 3 -#define HDLC_PREAMBLE_PATTERN_01 4 -#define HDLC_PREAMBLE_PATTERN_ONES 5 - -#define MGSL_MODE_ASYNC 1 -#define MGSL_MODE_HDLC 2 -#define MGSL_MODE_MONOSYNC 3 -#define MGSL_MODE_BISYNC 4 -#define MGSL_MODE_RAW 6 -#define MGSL_MODE_BASE_CLOCK 7 -#define MGSL_MODE_XSYNC 8 - -#define MGSL_BUS_TYPE_ISA 1 -#define MGSL_BUS_TYPE_EISA 2 -#define MGSL_BUS_TYPE_PCI 5 - -#define MGSL_INTERFACE_MASK 0xf -#define MGSL_INTERFACE_DISABLE 0 -#define MGSL_INTERFACE_RS232 1 -#define MGSL_INTERFACE_V35 2 -#define MGSL_INTERFACE_RS422 3 -#define MGSL_INTERFACE_RTS_EN 0x10 -#define MGSL_INTERFACE_LL 0x20 -#define MGSL_INTERFACE_RL 0x40 -#define MGSL_INTERFACE_MSB_FIRST 0x80 - -typedef struct _MGSL_PARAMS -{ - /* Common */ - - unsigned long mode; /* Asynchronous or HDLC */ - unsigned char loopback; /* internal loopback mode */ - - /* HDLC Only */ - - unsigned short flags; - unsigned char encoding; /* NRZ, NRZI, etc. */ - unsigned long clock_speed; /* external clock speed in bits per second */ - unsigned char addr_filter; /* receive HDLC address filter, 0xFF = disable */ - unsigned short crc_type; /* None, CRC16-CCITT, or CRC32-CCITT */ - unsigned char preamble_length; - unsigned char preamble; - - /* Async Only */ - - unsigned long data_rate; /* bits per second */ - unsigned char data_bits; /* 7 or 8 data bits */ - unsigned char stop_bits; /* 1 or 2 stop bits */ - unsigned char parity; /* none, even, or odd */ - -} MGSL_PARAMS, *PMGSL_PARAMS; - -#define MICROGATE_VENDOR_ID 0x13c0 -#define SYNCLINK_DEVICE_ID 0x0010 -#define MGSCC_DEVICE_ID 0x0020 -#define SYNCLINK_SCA_DEVICE_ID 0x0030 -#define SYNCLINK_GT_DEVICE_ID 0x0070 -#define SYNCLINK_GT4_DEVICE_ID 0x0080 -#define SYNCLINK_AC_DEVICE_ID 0x0090 -#define SYNCLINK_GT2_DEVICE_ID 0x00A0 -#define MGSL_MAX_SERIAL_NUMBER 30 - -/* -** device diagnostics status -*/ - -#define DiagStatus_OK 0 -#define DiagStatus_AddressFailure 1 -#define DiagStatus_AddressConflict 2 -#define DiagStatus_IrqFailure 3 -#define DiagStatus_IrqConflict 4 -#define DiagStatus_DmaFailure 5 -#define DiagStatus_DmaConflict 6 -#define DiagStatus_PciAdapterNotFound 7 -#define DiagStatus_CantAssignPciResources 8 -#define DiagStatus_CantAssignPciMemAddr 9 -#define DiagStatus_CantAssignPciIoAddr 10 -#define DiagStatus_CantAssignPciIrq 11 -#define DiagStatus_MemoryError 12 - -#define SerialSignal_DCD 0x01 /* Data Carrier Detect */ -#define SerialSignal_TXD 0x02 /* Transmit Data */ -#define SerialSignal_RI 0x04 /* Ring Indicator */ -#define SerialSignal_RXD 0x08 /* Receive Data */ -#define SerialSignal_CTS 0x10 /* Clear to Send */ -#define SerialSignal_RTS 0x20 /* Request to Send */ -#define SerialSignal_DSR 0x40 /* Data Set Ready */ -#define SerialSignal_DTR 0x80 /* Data Terminal Ready */ - - -/* - * Counters of the input lines (CTS, DSR, RI, CD) interrupts - */ -struct mgsl_icount { - __u32 cts, dsr, rng, dcd, tx, rx; - __u32 frame, parity, overrun, brk; - __u32 buf_overrun; - __u32 txok; - __u32 txunder; - __u32 txabort; - __u32 txtimeout; - __u32 rxshort; - __u32 rxlong; - __u32 rxabort; - __u32 rxover; - __u32 rxcrc; - __u32 rxok; - __u32 exithunt; - __u32 rxidle; -}; - -struct gpio_desc { - __u32 state; - __u32 smask; - __u32 dir; - __u32 dmask; -}; - -#define DEBUG_LEVEL_DATA 1 -#define DEBUG_LEVEL_ERROR 2 -#define DEBUG_LEVEL_INFO 3 -#define DEBUG_LEVEL_BH 4 -#define DEBUG_LEVEL_ISR 5 - -/* -** Event bit flags for use with MgslWaitEvent -*/ - -#define MgslEvent_DsrActive 0x0001 -#define MgslEvent_DsrInactive 0x0002 -#define MgslEvent_Dsr 0x0003 -#define MgslEvent_CtsActive 0x0004 -#define MgslEvent_CtsInactive 0x0008 -#define MgslEvent_Cts 0x000c -#define MgslEvent_DcdActive 0x0010 -#define MgslEvent_DcdInactive 0x0020 -#define MgslEvent_Dcd 0x0030 -#define MgslEvent_RiActive 0x0040 -#define MgslEvent_RiInactive 0x0080 -#define MgslEvent_Ri 0x00c0 -#define MgslEvent_ExitHuntMode 0x0100 -#define MgslEvent_IdleReceived 0x0200 - -/* Private IOCTL codes: - * - * MGSL_IOCSPARAMS set MGSL_PARAMS structure values - * MGSL_IOCGPARAMS get current MGSL_PARAMS structure values - * MGSL_IOCSTXIDLE set current transmit idle mode - * MGSL_IOCGTXIDLE get current transmit idle mode - * MGSL_IOCTXENABLE enable or disable transmitter - * MGSL_IOCRXENABLE enable or disable receiver - * MGSL_IOCTXABORT abort transmitting frame (HDLC) - * MGSL_IOCGSTATS return current statistics - * MGSL_IOCWAITEVENT wait for specified event to occur - * MGSL_LOOPTXDONE transmit in HDLC LoopMode done - * MGSL_IOCSIF set the serial interface type - * MGSL_IOCGIF get the serial interface type - */ -#define MGSL_MAGIC_IOC 'm' -#define MGSL_IOCSPARAMS _IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS) -#define MGSL_IOCGPARAMS _IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS) -#define MGSL_IOCSTXIDLE _IO(MGSL_MAGIC_IOC,2) -#define MGSL_IOCGTXIDLE _IO(MGSL_MAGIC_IOC,3) -#define MGSL_IOCTXENABLE _IO(MGSL_MAGIC_IOC,4) -#define MGSL_IOCRXENABLE _IO(MGSL_MAGIC_IOC,5) -#define MGSL_IOCTXABORT _IO(MGSL_MAGIC_IOC,6) -#define MGSL_IOCGSTATS _IO(MGSL_MAGIC_IOC,7) -#define MGSL_IOCWAITEVENT _IOWR(MGSL_MAGIC_IOC,8,int) -#define MGSL_IOCCLRMODCOUNT _IO(MGSL_MAGIC_IOC,15) -#define MGSL_IOCLOOPTXDONE _IO(MGSL_MAGIC_IOC,9) -#define MGSL_IOCSIF _IO(MGSL_MAGIC_IOC,10) -#define MGSL_IOCGIF _IO(MGSL_MAGIC_IOC,11) -#define MGSL_IOCSGPIO _IOW(MGSL_MAGIC_IOC,16,struct gpio_desc) -#define MGSL_IOCGGPIO _IOR(MGSL_MAGIC_IOC,17,struct gpio_desc) -#define MGSL_IOCWAITGPIO _IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc) -#define MGSL_IOCSXSYNC _IO(MGSL_MAGIC_IOC, 19) -#define MGSL_IOCGXSYNC _IO(MGSL_MAGIC_IOC, 20) -#define MGSL_IOCSXCTRL _IO(MGSL_MAGIC_IOC, 21) -#define MGSL_IOCGXCTRL _IO(MGSL_MAGIC_IOC, 22) - - -#endif /* _UAPI_SYNCLINK_H_ */ -- cgit v1.2.3 From a789761de3053d25f03787ac40897dbea14ee368 Mon Sep 17 00:00:00 2001 From: Benjamin Welton Date: Mon, 9 Feb 2026 00:42:00 +0800 Subject: amd/amdkfd: Add kfd_ioctl_profiler to contain profiler kernel driver changes kfd_ioctl_profiler takes a similar approach to that of kfd_ioctl_dbg_trap (which contains debugger related IOCTL services) where kfd_ioctl_profiler will contain all profiler related IOCTL services. The IOCTL is designed to be expanded as needed to support additional profiler functionality. The current functionality of the IOCTL is to allow for profilers which need PMC counters from GPU devices to both signal to other profilers that may be on the system that the device has active PMC profiling taking place on it (multiple PMC profilers on the same device can result in corrupted counter data) and to setup the device to allow for the collection of SQ PMC data on all queues on the device. For PMC data for the SQ block (such as SQ_WAVES) to be available to a profiler, mmPERFCOUNT_ENABLE must be set on the queues. When profiling a single process, the profiler can inject PM4 packets into each queue to turn on PERFCOUNT_ENABLE. When profiling system wide, the profiler does not have this option and must have a way to turn on profiling for queues in which it cannot inject packets into directly. Accomplishing this requires a few steps: 1. Checking if the user has the necessary permissions to profile system wide on the device. This check uses the same check that linux perf uses to determine if a user has the necessary permissions to profile at this scope (primarily if the process has CAP_SYS_PERFMON or is root). 2. Locking the device for profiling. This is done by setting a lock bit on the device struct and storing the process that locked the device. 3. Iterating all queues on the device and issuing an MQD Update to enable perfcounting on the queues. 4. Actions to cleanup if the process exits or releases the lock. The IOCTL also contains a link to the existing PC Sampling IOCTL as well. This is per a suggestion that we should potentially remove the PC Sampling IOCTL to have it be a part of the profiler IOCTL. This is a future change. In addition, we do expect to expand the profiler IOCTL to include additional profiler functionality in the future (which necessitates the use of a version number). v2: sqaush in proper IOCTL number Proposed userpace support: https://github.com/ROCm/rocm-systems/commit/40abc95a6463a61bb318a67efd6d9cc3e5ee8839 Signed-off-by: Benjamin Welton Signed-off-by: Perry Yuan Acked-by: Kent Russell Reviewed-by: Yifan Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- include/uapi/linux/kfd_ioctl.h | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index e72359370857..cc3ed0765c83 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -1558,6 +1558,29 @@ struct kfd_ioctl_dbg_trap_args { }; }; +#define KFD_IOC_PROFILER_VERSION_NUM 1 +enum kfd_profiler_ops { + KFD_IOC_PROFILER_PMC = 0, + KFD_IOC_PROFILER_VERSION = 2, +}; + +/** + * Enables/Disables GPU Specific profiler settings + */ +struct kfd_ioctl_pmc_settings { + __u32 gpu_id; /* This is the user_gpu_id */ + __u32 lock; /* Lock GPU for Profiling */ + __u32 perfcount_enable; /* Force Perfcount Enable for queues on GPU */ +}; + +struct kfd_ioctl_profiler_args { + __u32 op; /* kfd_profiler_op */ + union { + struct kfd_ioctl_pmc_settings pmc; + __u32 version; /* KFD_IOC_PROFILER_VERSION_NUM */ + }; +}; + #define AMDKFD_IOCTL_BASE 'K' #define AMDKFD_IO(nr) _IO(AMDKFD_IOCTL_BASE, nr) #define AMDKFD_IOR(nr, type) _IOR(AMDKFD_IOCTL_BASE, nr, type) @@ -1681,7 +1704,10 @@ struct kfd_ioctl_dbg_trap_args { #define AMDKFD_IOC_CREATE_PROCESS \ AMDKFD_IO(0x27) +#define AMDKFD_IOC_PROFILER \ + AMDKFD_IOWR(0x28, struct kfd_ioctl_profiler_args) + #define AMDKFD_COMMAND_START 0x01 -#define AMDKFD_COMMAND_END 0x28 +#define AMDKFD_COMMAND_END 0x29 #endif -- cgit v1.2.3 From dd61e27535a6f5cfb32a847b282d2e3d5aebf46f Mon Sep 17 00:00:00 2001 From: Perry Yuan Date: Mon, 9 Feb 2026 00:42:07 +0800 Subject: drm/amdkfd: Add PTL control IOCTL Option and unify refcount logic Introduce a new IOCTL option to allow userspace explicit control over the Peak Tops Limiter (PTL) state for profiling Link: https://github.com/ROCm/rocm-systems/tree/develop/projects/rocprofiler-sdk Signed-off-by: Perry Yuan Reviewed-by: Yifan Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- include/uapi/linux/kfd_ioctl.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index cc3ed0765c83..1a94d512df35 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -1562,6 +1562,7 @@ struct kfd_ioctl_dbg_trap_args { enum kfd_profiler_ops { KFD_IOC_PROFILER_PMC = 0, KFD_IOC_PROFILER_VERSION = 2, + KFD_IOC_PROFILER_PTL_CONTROL = 3, }; /** @@ -1573,10 +1574,16 @@ struct kfd_ioctl_pmc_settings { __u32 perfcount_enable; /* Force Perfcount Enable for queues on GPU */ }; +struct kfd_ioctl_ptl_control { + __u32 gpu_id; /* user_gpu_id */ + __u32 enable; /* set 1 to enable PTL, set 0 to disable PTL */ +}; + struct kfd_ioctl_profiler_args { __u32 op; /* kfd_profiler_op */ union { struct kfd_ioctl_pmc_settings pmc; + struct kfd_ioctl_ptl_control ptl; __u32 version; /* KFD_IOC_PROFILER_VERSION_NUM */ }; }; -- cgit v1.2.3 From c62c076d2d64ead542c961cabed0f9467d7d6026 Mon Sep 17 00:00:00 2001 From: Perry Yuan Date: Wed, 15 Apr 2026 10:34:03 +0800 Subject: drm/amdkfd: bump KFD ioctl minor version to 1.23 Bump `KFD_IOCTL_MINOR_VERSION` from 22 to 23 and document version 1.23 in `kfd_ioctl.h` so userspace can detect profiler ioctl support. Signed-off-by: Perry Yuan Suggested-by: Alex Deucher Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- include/uapi/linux/kfd_ioctl.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index 1a94d512df35..9584b5aab727 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -48,9 +48,10 @@ * - 1.20 - Trap handler support for expert scheduling mode available * - 1.21 - Debugger support to subscribe to LDS out-of-address exceptions * - 1.22 - Add queue creation with metadata ring base address + * - 1.23 - Add profiler control ioctl to enable/disable profiler on a process */ #define KFD_IOCTL_MAJOR_VERSION 1 -#define KFD_IOCTL_MINOR_VERSION 22 +#define KFD_IOCTL_MINOR_VERSION 23 struct kfd_ioctl_get_version_args { __u32 major_version; /* from KFD */ -- cgit v1.2.3 From f28771c0691bcb7f477a0f35550b17b88c32dea8 Mon Sep 17 00:00:00 2001 From: Leon Hwang Date: Tue, 12 May 2026 23:31:50 +0800 Subject: bpf: Extend BPF syscall with common attributes support Add generic BPF syscall support for passing common attributes. The initial set of common attributes includes: 1. 'log_buf': User-provided buffer for storing logs. 2. 'log_size': Size of the log buffer. 3. 'log_level': Log verbosity level. 4. 'log_true_size': Actual log size reported by kernel. The common-attribute pointer and its size are passed as the 4th and 5th syscall arguments. A new command bit, 'BPF_COMMON_ATTRS' ('1 << 16'), indicates that common attributes are supplied. This commit adds syscall and uapi plumbing. Command-specific handling is added in follow-up patches. Signed-off-by: Leon Hwang Link: https://lore.kernel.org/r/20260512153157.28382-2-leon.hwang@linux.dev Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 552bc5d9afbd..aec171ccb6ef 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -994,6 +994,7 @@ enum bpf_cmd { BPF_PROG_STREAM_READ_BY_FD, BPF_PROG_ASSOC_STRUCT_OPS, __MAX_BPF_CMD, + BPF_COMMON_ATTRS = 1 << 16, /* Indicate carrying syscall common attrs. */ }; enum bpf_map_type { @@ -1500,6 +1501,13 @@ struct bpf_stack_build_id { }; }; +struct bpf_common_attr { + __aligned_u64 log_buf; + __u32 log_size; + __u32 log_level; + __u32 log_true_size; +}; + #define BPF_OBJ_NAME_LEN 16U enum { -- cgit v1.2.3 From b588019e85f490696bf19f0747e93f14b1563927 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 11 May 2026 07:02:44 +0000 Subject: rtnetlink: add RTEXT_FILTER_NAME_ONLY support iproute2 can spend considerable amount of time in ll_init_map() or ll_link_get() to dump verbose netdev attributes, contributing to RTNL pressure. Add RTEXT_FILTER_NAME_ONLY new flag so that rtnl_fill_ifinfo() limits its output to: - struct nlmsghdr - IFLA_IFNAME - IFLA_PROP_LIST (alternate names) We can later avoid using RTNL when RTEXT_FILTER_NAME_ONLY is requested, as none of these attributes need RTNL. Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260511070244.971028-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/rtnetlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index dab9493c791b..27265fd31e5f 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -840,6 +840,7 @@ enum { #define RTEXT_FILTER_CFM_CONFIG (1 << 5) #define RTEXT_FILTER_CFM_STATUS (1 << 6) #define RTEXT_FILTER_MST (1 << 7) +#define RTEXT_FILTER_NAME_ONLY (1 << 8) /* End of information exported to user level */ -- cgit v1.2.3 From d5607f1fafd7eb72ed693b6a033d96221e870edd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christoph=20B=C3=B6hmwalder?= Date: Wed, 13 May 2026 13:03:42 +0200 Subject: drbd: clean up UAPI headers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit b1798910fc7f ("drbd: move UAPI headers to include/uapi/linux/") broke compilation on targets without a hosted libc: ./usr/include/linux/drbd.h:18:10: fatal error: sys/types.h: No such file or directory The underlying issue is that there were some constructs left over in those headers that don't belong in uapi. Drop the __KERNEL__-gated split in drbd.h. The !__KERNEL__ branch pulls in , and for symbols that the header does not actually reference; they were carried over from when this lived in include/linux/. Replace and the entire #ifdef block with the standard UAPI combo + , which provides __u32/__u64/__s32 and __{LITTLE,BIG}_ENDIAN_BITFIELD in both kernel and userspace contexts. drbd_limits.h references some enum values and the DRBD_PROT_C define from drbd.h, but does not include it. Add the missing include while we're here. Drop the unprefixed DEBUG_RANGE_CHECK from drbd_limits.h. It has no in-kernel users and pollutes the userspace namespace. Switch the drbd.h and drbd_limits.h include guards to the _UAPI_LINUX_* convention already used by drbd_genl.h. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202605101346.V2wwJqv1-lkp@intel.com/ Fixes: b1798910fc7f ("drbd: move UAPI headers to include/uapi/linux/") Signed-off-by: Christoph Böhmwalder Link: https://patch.msgid.link/20260513110343.3170338-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe --- include/uapi/linux/drbd.h | 28 +++------------------------- include/uapi/linux/drbd_limits.h | 8 ++++---- 2 files changed, 7 insertions(+), 29 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/drbd.h b/include/uapi/linux/drbd.h index 5d4d677cf1ad..cf1ec3eb872f 100644 --- a/include/uapi/linux/drbd.h +++ b/include/uapi/linux/drbd.h @@ -11,32 +11,10 @@ */ -#ifndef DRBD_H -#define DRBD_H -#include - -#ifdef __KERNEL__ +#ifndef _UAPI_LINUX_DRBD_H +#define _UAPI_LINUX_DRBD_H #include #include -#else -#include -#include -#include - -/* Although the Linux source code makes a difference between - generic endianness and the bitfields' endianness, there is no - architecture as of Linux-2.6.24-rc4 where the bitfields' endianness - does not match the generic endianness. */ - -#if __BYTE_ORDER == __LITTLE_ENDIAN -#define __LITTLE_ENDIAN_BITFIELD -#elif __BYTE_ORDER == __BIG_ENDIAN -#define __BIG_ENDIAN_BITFIELD -#else -# error "sorry, weird endianness on this box" -#endif - -#endif enum drbd_io_error_p { EP_PASS_ON, /* FIXME should the better be named "Ignore"? */ @@ -432,4 +410,4 @@ enum drbd_state_info_bcast_reason { SIB_SYNC_PROGRESS = 5, }; -#endif +#endif /* _UAPI_LINUX_DRBD_H */ diff --git a/include/uapi/linux/drbd_limits.h b/include/uapi/linux/drbd_limits.h index a72a102d1ca7..acefe84bc602 100644 --- a/include/uapi/linux/drbd_limits.h +++ b/include/uapi/linux/drbd_limits.h @@ -11,10 +11,10 @@ * feedback about nonsense settings for certain configurable values. */ -#ifndef DRBD_LIMITS_H -#define DRBD_LIMITS_H 1 +#ifndef _UAPI_LINUX_DRBD_LIMITS_H +#define _UAPI_LINUX_DRBD_LIMITS_H -#define DEBUG_RANGE_CHECK 0 +#include #define DRBD_MINOR_COUNT_MIN 1U #define DRBD_MINOR_COUNT_MAX 255U @@ -248,4 +248,4 @@ #define DRBD_RS_DISCARD_GRANULARITY_DEF 0U /* disabled by default */ #define DRBD_RS_DISCARD_GRANULARITY_SCALE '1' /* bytes */ -#endif +#endif /* _UAPI_LINUX_DRBD_LIMITS_H */ -- cgit v1.2.3 From a2f6ed7b4873288d9e90e69199012857bed4bfa4 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sat, 9 May 2026 10:03:26 -0700 Subject: net/sched: netem: add per-impairment extended statistics Add 64-bit counters for each impairment netem applies (delay, loss, ECN marking, corruption, duplication, reordering) and for skb allocation failures during enqueue. Exposed through TCA_STATS_APP as struct tc_netem_xstats. Counters increment when an impairment is occurs, independent of later events that may mask its on-wire effect. Added allocation_errors (similar to sch_fq) to account for when impairment could not be applied due to memory pressure, etc. Signed-off-by: Stephen Hemminger Link: https://patch.msgid.link/20260509171123.307549-6-stephen@networkplumber.org Signed-off-by: Paolo Abeni --- include/uapi/linux/pkt_sched.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index 66e8072f44df..490efd288526 100644 --- a/include/uapi/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h @@ -569,6 +569,16 @@ struct tc_netem_gemodel { #define NETEM_DIST_SCALE 8192 #define NETEM_DIST_MAX 16384 +struct tc_netem_xstats { + __u64 delayed; /* packets delayed */ + __u64 dropped; /* packets dropped by loss model */ + __u64 corrupted; /* packets with bit errors injected */ + __u64 duplicated; /* duplicate packets generated */ + __u64 reordered; /* packets sent out of order */ + __u64 ecn_marked; /* packets ECN CE-marked (not dropped)*/ + __u64 allocation_errors; +}; + /* DRR */ enum { -- cgit v1.2.3 From 0c32db0761fef3d98d6e4d6d8ce02c40e914f4d8 Mon Sep 17 00:00:00 2001 From: Danielle Ratson Date: Mon, 11 May 2026 09:59:31 +0300 Subject: bridge: uapi: Add neigh_forward_grat netlink attributes Add netlink attributes for controlling gratuitous ARP and unsolicited NA forwarding when neighbor suppression is enabled. Add IFLA_BRPORT_NEIGH_FORWARD_GRAT for port-level control and BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT for per-VLAN control. The new attributes provide independent control of gratuitous ARP and unsolicited NA packets. Operators can enable forwarding for those packets for fast mobility across VTEPs while keeping general neighbor suppression active. Reviewed-by: Ido Schimmel Signed-off-by: Danielle Ratson Link: https://patch.msgid.link/20260511065936.4173106-2-danieller@nvidia.com Signed-off-by: Paolo Abeni --- include/uapi/linux/if_bridge.h | 1 + include/uapi/linux/if_link.h | 17 +++++++++++++++++ 2 files changed, 18 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index e52f8207ab27..21a700c02ef7 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -526,6 +526,7 @@ enum { BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS, BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS, BRIDGE_VLANDB_ENTRY_NEIGH_SUPPRESS, + BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT, __BRIDGE_VLANDB_ENTRY_MAX, }; #define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1) diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 79ce4bc24cba..46413392b402 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -1085,6 +1085,22 @@ enum { * Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS* * is enabled for a given port. * + * @IFLA_BRPORT_NEIGH_FORWARD_GRAT + * Controls whether gratuitous ARP packets and unsolicited Neighbor + * Advertisement packets are forwarded on a given port even when neighbor + * suppression is enabled. + * By default this flag is off, meaning gratuitous ARP and unsolicited NA + * packets will be suppressed when neighbor suppression is enabled. + * Setting this flag to on allows these packets to be forwarded even + * when *IFLA_BRPORT_NEIGH_SUPPRESS* or *IFLA_BRPORT_NEIGH_VLAN_SUPPRESS* + * is enabled. + * + * Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS* + * or *IFLA_BRPORT_NEIGH_VLAN_SUPPRESS* is enabled for a given port. + * When *IFLA_BRPORT_NEIGH_VLAN_SUPPRESS* is set, this port-level flag is + * ignored and per-VLAN control is available via + * *BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT*. + * * @IFLA_BRPORT_BACKUP_NHID * The FDB nexthop object ID to attach to packets being redirected to a * backup port that has VLAN tunnel mapping enabled (via the @@ -1137,6 +1153,7 @@ enum { IFLA_BRPORT_MCAST_MAX_GROUPS, IFLA_BRPORT_NEIGH_VLAN_SUPPRESS, IFLA_BRPORT_BACKUP_NHID, + IFLA_BRPORT_NEIGH_FORWARD_GRAT, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) -- cgit v1.2.3 From 899bea8248cee35d54760a5e7d61a76af8e64411 Mon Sep 17 00:00:00 2001 From: Shouvik Kar Date: Tue, 12 May 2026 16:32:42 +0530 Subject: io_uring/net: allow filtering on IORING_OP_CONNECT This adds custom filtering for IORING_OP_CONNECT, where the target family is always exposed, and (for AF_INET / AF_INET6) port and address are exposed. port and v4_addr are in network byte order so filter authors can compare against on-wire constants. Skip population unless addr_len covers the populated fields, to avoid leaking stale io_async_msghdr data on short connects. Signed-off-by: Shouvik Kar Link: https://patch.msgid.link/20260512110242.26219-1-auxcorelabs@gmail.com Signed-off-by: Jens Axboe --- include/uapi/linux/io_uring/bpf_filter.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/io_uring/bpf_filter.h b/include/uapi/linux/io_uring/bpf_filter.h index 1b461d792a7b..ce7d78ab13b3 100644 --- a/include/uapi/linux/io_uring/bpf_filter.h +++ b/include/uapi/linux/io_uring/bpf_filter.h @@ -27,6 +27,22 @@ struct io_uring_bpf_ctx { __u64 mode; __u64 resolve; } open; + /* + * For CONNECT: fields are populated only when addr_len covers + * them; unpopulated fields are zero from the caller-side memset + * in io_uring_populate_bpf_ctx(). port and v4_addr are network + * byte order. Filters may only issue BPF_LD|BPF_W|BPF_ABS at + * 4-byte aligned offsets; load + mask for sub-word fields. + */ + struct { + __u32 family; /* sa_family_t zero-extended */ + __be16 port; + __u8 pad[2]; + union { + __be32 v4_addr; + __u8 v6_addr[16]; + }; + } connect; }; }; -- cgit v1.2.3 From 45e57cfb7b10b64fb0d38d671d26ec935fc7efce Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 15 May 2026 11:35:12 -0400 Subject: fs: Clarify FS_CASEFOLD_FL semantics in UAPI header The existing one-liner "Folder is case insensitive" leaves the impression that FS_CASEFOLD_FL is reserved for directories. That impression is wrong: filesystems that derive case-insensitivity from mount or volume state report the bit on non-directory inodes via i_op->fileattr_get, so userspace inspecting FS_IOC_GETFLAGS can see it on any inode type. Replace the one-liner with a block comment that names directories as the typical case, records that non-directory inodes may also report the bit, and notes FS_XFLAG_CASEFOLD as the read-only companion exposed through FS_IOC_FSGETXATTR. Reported-by: sashiko-bot Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=3 Signed-off-by: Chuck Lever Link: https://patch.msgid.link/20260515153515.362266-5-cel@kernel.org Signed-off-by: Christian Brauner --- include/uapi/linux/fs.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 2ea4c81df08f..bd87262f2e34 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -395,7 +395,16 @@ struct file_attr { #define FS_DAX_FL 0x02000000 /* Inode is DAX */ #define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */ #define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */ -#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */ +/* + * FS_CASEFOLD_FL indicates case-insensitive name lookup. The + * bit is most often reported on directories, where it controls + * lookups of entries within. Filesystems that derive + * case-insensitivity from mount or volume state may also report + * it on non-directory inodes; userspace must not assume the bit + * is directory-only. FS_XFLAG_CASEFOLD reports the same + * information read-only via FS_IOC_FSGETXATTR. + */ +#define FS_CASEFOLD_FL 0x40000000 #define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */ #define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ -- cgit v1.2.3 From 65efd1314dbcb37e4ab47974095ae97f90751f30 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 18 May 2026 16:40:32 +0200 Subject: media: include/uapi/linux/cec*.h: add CEC LIP support Add support for the new Latency Indication Protocol feature. This adds the opcodes and the wrapper functions. Signed-off-by: Hans Verkuil Link: https://patch.msgid.link/8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org Signed-off-by: Mauro Carvalho Chehab Message-ID: <8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org> --- include/uapi/linux/cec-funcs.h | 182 +++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/cec.h | 24 ++++++ 2 files changed, 206 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/cec-funcs.h b/include/uapi/linux/cec-funcs.h index 189ecf0e13cd..ba4b47de9bf0 100644 --- a/include/uapi/linux/cec-funcs.h +++ b/include/uapi/linux/cec-funcs.h @@ -1701,6 +1701,188 @@ static inline void cec_ops_request_current_latency(const struct cec_msg *msg, } +/* Latency Indication Protocol Feature */ +/* Only for CEC 2.0 and up */ +static inline void cec_msg_request_lip_support(struct cec_msg *msg, + int reply, __u16 phys_addr) +{ + msg->len = 4; + msg->msg[1] = CEC_MSG_REQUEST_LIP_SUPPORT; + msg->msg[2] = phys_addr >> 8; + msg->msg[3] = phys_addr & 0xff; + msg->reply = reply ? CEC_MSG_REPORT_LIP_SUPPORT : 0; +} + +static inline void cec_ops_request_lip_support(const struct cec_msg *msg, + __u16 *phys_addr) +{ + *phys_addr = (msg->msg[2] << 8) | msg->msg[3]; +} + +static inline void cec_msg_report_lip_support(struct cec_msg *msg, __u32 sqid) +{ + msg->len = 6; + msg->msg[1] = CEC_MSG_REPORT_LIP_SUPPORT; + msg->msg[2] = sqid >> 24; + msg->msg[3] = (sqid >> 16) & 0xff; + msg->msg[4] = (sqid >> 8) & 0xff; + msg->msg[5] = sqid & 0xff; +} + +static inline void cec_ops_report_lip_support(const struct cec_msg *msg, + __u32 *sqid) +{ + *sqid = (msg->msg[2] << 24) | (msg->msg[3] << 16) | + (msg->msg[4] << 8) | msg->msg[5]; +} + +static inline void cec_msg_request_audio_and_video_latency(struct cec_msg *msg, + int reply, __u8 video_format, + __u8 hdr_format, __u8 vrr_format, + __u8 audio_format, + __u8 audio_format_extension) +{ + msg->len = 6; + msg->msg[1] = CEC_MSG_REQUEST_AUDIO_AND_VIDEO_LATENCY; + msg->msg[2] = video_format; + msg->msg[3] = hdr_format; + msg->msg[4] = vrr_format; + msg->msg[5] = audio_format; + if (audio_format >= 1 && audio_format <= 31) { + msg->msg[6] = audio_format_extension; + msg->len++; + } + msg->reply = reply ? CEC_MSG_REPORT_AUDIO_AND_VIDEO_LATENCY : 0; +} + +static inline void cec_ops_request_audio_and_video_latency(const struct cec_msg *msg, + __u8 *video_format, + __u8 *hdr_format, + __u8 *vrr_format, + __u8 *audio_format, + __u8 *audio_format_extension) +{ + *video_format = msg->msg[2]; + *hdr_format = msg->msg[3]; + *vrr_format = msg->msg[4]; + *audio_format = msg->msg[5]; + *audio_format_extension = msg->len > 6 ? msg->msg[6] : 0; +} + +static inline void cec_msg_report_audio_and_video_latency(struct cec_msg *msg, + __u16 video_latency, + __u16 audio_latency) +{ + msg->len = 6; + msg->msg[1] = CEC_MSG_REPORT_AUDIO_AND_VIDEO_LATENCY; + msg->msg[2] = video_latency >> 8; + msg->msg[3] = video_latency & 0xff; + msg->msg[4] = audio_latency >> 8; + msg->msg[5] = audio_latency & 0xff; +} + +static inline void cec_ops_report_audio_and_video_latency(const struct cec_msg *msg, + __u16 *video_latency, + __u16 *audio_latency) +{ + *video_latency = (msg->msg[2] << 8) | msg->msg[3]; + *audio_latency = (msg->msg[4] << 8) | msg->msg[5]; +} + +static inline void cec_msg_request_audio_latency(struct cec_msg *msg, + int reply, + __u8 audio_format, + __u8 audio_format_extension) +{ + msg->len = 3; + msg->msg[1] = CEC_MSG_REQUEST_AUDIO_LATENCY; + msg->msg[2] = audio_format; + if (audio_format >= 1 && audio_format <= 31) { + msg->msg[3] = audio_format_extension; + msg->len++; + } + msg->reply = reply ? CEC_MSG_REPORT_AUDIO_LATENCY : 0; +} + +static inline void cec_ops_request_audio_latency(const struct cec_msg *msg, + __u8 *audio_format, + __u8 *audio_format_extension) +{ + *audio_format = msg->msg[2]; + *audio_format_extension = msg->len > 3 ? msg->msg[3] : 0; +} + +static inline void cec_msg_report_audio_latency(struct cec_msg *msg, + __u16 audio_latency) +{ + msg->len = 4; + msg->msg[1] = CEC_MSG_REPORT_AUDIO_LATENCY; + msg->msg[2] = audio_latency >> 8; + msg->msg[3] = audio_latency & 0xff; +} + +static inline void cec_ops_report_audio_latency(const struct cec_msg *msg, + __u16 *audio_latency) +{ + *audio_latency = (msg->msg[2] << 8) | msg->msg[3]; +} + +static inline void cec_msg_request_video_latency(struct cec_msg *msg, + int reply, __u8 video_format, + __u8 hdr_format, + __u8 vrr_format) +{ + msg->len = 5; + msg->msg[1] = CEC_MSG_REQUEST_VIDEO_LATENCY; + msg->msg[2] = video_format; + msg->msg[3] = hdr_format; + msg->msg[4] = vrr_format; + msg->reply = reply ? CEC_MSG_REPORT_VIDEO_LATENCY : 0; +} + +static inline void cec_ops_request_video_latency(const struct cec_msg *msg, + __u8 *video_format, + __u8 *hdr_format, + __u8 *vrr_format) +{ + *video_format = msg->msg[2]; + *hdr_format = msg->msg[3]; + *vrr_format = msg->msg[4]; +} + +static inline void cec_msg_report_video_latency(struct cec_msg *msg, + __u16 video_latency) +{ + msg->len = 4; + msg->msg[1] = CEC_MSG_REPORT_VIDEO_LATENCY; + msg->msg[2] = video_latency >> 8; + msg->msg[3] = video_latency & 0xff; +} + +static inline void cec_ops_report_video_latency(const struct cec_msg *msg, + __u16 *video_latency) +{ + *video_latency = (msg->msg[2] << 8) | msg->msg[3]; +} + +static inline void cec_msg_update_sqid(struct cec_msg *msg, __u32 sqid) +{ + msg->len = 6; + msg->msg[1] = CEC_MSG_UPDATE_SQID; + msg->msg[2] = sqid >> 24; + msg->msg[3] = (sqid >> 16) & 0xff; + msg->msg[4] = (sqid >> 8) & 0xff; + msg->msg[5] = sqid & 0xff; +} + +static inline void cec_ops_update_sqid(const struct cec_msg *msg, + __u32 *sqid) +{ + *sqid = (msg->msg[2] << 24) | (msg->msg[3] << 16) | + (msg->msg[4] << 8) | msg->msg[5]; +} + + /* Capability Discovery and Control Feature */ static inline void cec_msg_cdc_hec_inquire_state(struct cec_msg *msg, __u16 phys_addr1, diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h index b2af1dddd4d7..75bc9e4e0350 100644 --- a/include/uapi/linux/cec.h +++ b/include/uapi/linux/cec.h @@ -1104,6 +1104,30 @@ struct cec_event { #define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY 3 +/* Latency Indication Protocol Feature */ +#define CEC_MSG_REQUEST_LIP_SUPPORT 0x50 +#define CEC_MSG_REPORT_LIP_SUPPORT 0x51 +#define CEC_MSG_REQUEST_AUDIO_AND_VIDEO_LATENCY 0x52 +/* HDR Format Operand (hdr_format) */ +#define CEC_OP_HDR_FORMAT_GAMMA_SDR 0 +#define CEC_OP_HDR_FORMAT_GAMMA_HDR 1 +#define CEC_OP_HDR_FORMAT_PQ 2 +#define CEC_OP_HDR_FORMAT_HLG 3 +#define CEC_OP_HDR_FORMAT_DYNAMIC_HDR_TYPE_1 8 +#define CEC_OP_HDR_FORMAT_DYNAMIC_HDR_TYPE_2 9 +#define CEC_OP_HDR_FORMAT_DYNAMIC_HDR_TYPE_4 11 +#define CEC_OP_HDR_FORMAT_DV_SINK_LED 16 +#define CEC_OP_HDR_FORMAT_DV_SOURCE_LED 17 +#define CEC_OP_HDR_FORMAT_HDR10PLUS 24 +#define CEC_OP_HDR_FORMAT_ETSI_TS_103_433 32 +#define CEC_MSG_REPORT_AUDIO_AND_VIDEO_LATENCY 0x53 +#define CEC_MSG_REQUEST_AUDIO_LATENCY 0x54 +#define CEC_MSG_REPORT_AUDIO_LATENCY 0x55 +#define CEC_MSG_REQUEST_VIDEO_LATENCY 0x56 +#define CEC_MSG_REPORT_VIDEO_LATENCY 0x57 +#define CEC_MSG_UPDATE_SQID 0x58 + + /* Capability Discovery and Control Feature */ #define CEC_MSG_CDC_MESSAGE 0xf8 /* Ethernet-over-HDMI: nobody ever does this... */ -- cgit v1.2.3 From 79500c929de313550554e604d22f3202955cea20 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 18 May 2026 16:40:35 +0200 Subject: media: include/uapi/linux/cec*: clarify which msgs are CEC 2.0 Drop comments about CEC 2.0 from cec-funcs.h. In cec.h clearly comment messages that are CEC 2.0 specific as such. Also rename references to HDMI 2.0 to CEC 2.0. The messages were marked as CEC 2.0 only. That is wrong, these messages are explicitly allowed for any CEC version. Signed-off-by: Hans Verkuil Link: https://patch.msgid.link/098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org Signed-off-by: Mauro Carvalho Chehab Message-ID: <098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org> --- include/uapi/linux/cec.h | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h index 75bc9e4e0350..81a05c9c0706 100644 --- a/include/uapi/linux/cec.h +++ b/include/uapi/linux/cec.h @@ -742,7 +742,7 @@ struct cec_event { #define CEC_OP_PRIM_DEVTYPE_PROCESSOR 7 #define CEC_MSG_SET_MENU_LANGUAGE 0x32 -#define CEC_MSG_REPORT_FEATURES 0xa6 /* HDMI 2.0 */ +#define CEC_MSG_REPORT_FEATURES 0xa6 /* CEC 2.0 */ /* All Device Types Operand (all_device_types) */ #define CEC_OP_ALL_DEVTYPE_TV 0x80 #define CEC_OP_ALL_DEVTYPE_RECORD 0x40 @@ -777,7 +777,7 @@ struct cec_event { #define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX 0x02 #define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_VOLUME_LEVEL 0x01 -#define CEC_MSG_GIVE_FEATURES 0xa5 /* HDMI 2.0 */ +#define CEC_MSG_GIVE_FEATURES 0xa5 /* CEC 2.0 */ /* Deck Control Feature */ @@ -1067,7 +1067,7 @@ struct cec_event { #define CEC_OP_AUD_FMT_ID_CEA861 0 #define CEC_OP_AUD_FMT_ID_CEA861_CXT 1 -#define CEC_MSG_SET_AUDIO_VOLUME_LEVEL 0x73 +#define CEC_MSG_SET_AUDIO_VOLUME_LEVEL 0x73 /* CEC 2.0 */ /* Audio Rate Control Feature */ #define CEC_MSG_SET_AUDIO_RATE 0x9a @@ -1091,7 +1091,6 @@ struct cec_event { /* Dynamic Audio Lipsync Feature */ -/* Only for CEC 2.0 and up */ #define CEC_MSG_REQUEST_CURRENT_LATENCY 0xa7 #define CEC_MSG_REPORT_CURRENT_LATENCY 0xa8 /* Low Latency Mode Operand (low_latency_mode) */ @@ -1105,9 +1104,9 @@ struct cec_event { /* Latency Indication Protocol Feature */ -#define CEC_MSG_REQUEST_LIP_SUPPORT 0x50 -#define CEC_MSG_REPORT_LIP_SUPPORT 0x51 -#define CEC_MSG_REQUEST_AUDIO_AND_VIDEO_LATENCY 0x52 +#define CEC_MSG_REQUEST_LIP_SUPPORT 0x50 /* CEC 2.0 */ +#define CEC_MSG_REPORT_LIP_SUPPORT 0x51 /* CEC 2.0 */ +#define CEC_MSG_REQUEST_AUDIO_AND_VIDEO_LATENCY 0x52 /* CEC 2.0 */ /* HDR Format Operand (hdr_format) */ #define CEC_OP_HDR_FORMAT_GAMMA_SDR 0 #define CEC_OP_HDR_FORMAT_GAMMA_HDR 1 @@ -1120,12 +1119,12 @@ struct cec_event { #define CEC_OP_HDR_FORMAT_DV_SOURCE_LED 17 #define CEC_OP_HDR_FORMAT_HDR10PLUS 24 #define CEC_OP_HDR_FORMAT_ETSI_TS_103_433 32 -#define CEC_MSG_REPORT_AUDIO_AND_VIDEO_LATENCY 0x53 -#define CEC_MSG_REQUEST_AUDIO_LATENCY 0x54 -#define CEC_MSG_REPORT_AUDIO_LATENCY 0x55 -#define CEC_MSG_REQUEST_VIDEO_LATENCY 0x56 -#define CEC_MSG_REPORT_VIDEO_LATENCY 0x57 -#define CEC_MSG_UPDATE_SQID 0x58 +#define CEC_MSG_REPORT_AUDIO_AND_VIDEO_LATENCY 0x53 /* CEC 2.0 */ +#define CEC_MSG_REQUEST_AUDIO_LATENCY 0x54 /* CEC 2.0 */ +#define CEC_MSG_REPORT_AUDIO_LATENCY 0x55 /* CEC 2.0 */ +#define CEC_MSG_REQUEST_VIDEO_LATENCY 0x56 /* CEC 2.0 */ +#define CEC_MSG_REPORT_VIDEO_LATENCY 0x57 /* CEC 2.0 */ +#define CEC_MSG_UPDATE_SQID 0x58 /* CEC 2.0 */ /* Capability Discovery and Control Feature */ -- cgit v1.2.3 From 9bf93cb2e180a58d5984ba13daee95903ff4fc14 Mon Sep 17 00:00:00 2001 From: Vadim Fedorenko Date: Fri, 15 May 2026 13:50:28 +0000 Subject: pps: bump PPS device count Modern systems may have more than 16 PPS sources and current hard-coded limit breaks registration of some devices. Let's bump the limit to 256 in hope it will be enough in foreseen future. Signed-off-by: Vadim Fedorenko Acked-by: Rodolfo Giometti Link: https://patch.msgid.link/20260515135028.2021318-1-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski --- include/uapi/linux/pps.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pps.h b/include/uapi/linux/pps.h index 009ebcd8ced5..1088dea65e12 100644 --- a/include/uapi/linux/pps.h +++ b/include/uapi/linux/pps.h @@ -26,7 +26,7 @@ #include #define PPS_VERSION "5.3.6" -#define PPS_MAX_SOURCES 16 /* should be enough... */ +#define PPS_MAX_SOURCES 256 /* should be enough... */ /* Implementation note: the logical states ``assert'' and ``clear'' * are implemented in terms of the chip register, i.e. ``assert'' -- cgit v1.2.3 From c15d7a2a11ea055bcecc0b538ae8ba79475637f9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 4 Dec 2025 11:17:23 +0100 Subject: tee: fix tee_ioctl_object_invoke_arg padding The tee_ioctl_object_invoke_arg structure has padding on some architectures but not on x86-32 and a few others: include/linux/tee.h:474:32: error: padding struct to align 'params' [-Werror=padded] I expect that all current users of this are on architectures that do have implicit padding here (arm64, arm, x86, riscv), so make the padding explicit in order to avoid surprises if this later gets used elsewhere. Fixes: d5b8b0fa1775 ("tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF") Signed-off-by: Arnd Bergmann Reviewed-by: Jens Wiklander Tested-by: Harshal Dev Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander --- include/uapi/linux/tee.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index cab5cadca8ef..5203977ed35d 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -470,6 +470,7 @@ struct tee_ioctl_object_invoke_arg { __u32 op; __u32 ret; __u32 num_params; + __u32 :32; /* num_params tells the actual number of element in params */ struct tee_ioctl_param params[]; }; -- cgit v1.2.3 From 7b5121c3374e24c8f6490b54f347eb06ee16028c Mon Sep 17 00:00:00 2001 From: Sergio Lopez Date: Tue, 28 Apr 2026 21:44:48 +0200 Subject: drm/virtio: support VIRTIO_GPU_F_BLOB_ALIGNMENT Support VIRTIO_GPU_F_BLOB_ALIGNMENT, a feature that indicates the device provides a valid blob_alignment field in its configuration, and that both RESOURCE_CREATE_BLOB and RESOURCE_MAP_BLOB requests must be aligned to that value. Signed-off-by: Sergio Lopez Signed-off-by: Dmitry Osipenko Link: https://patch.msgid.link/20260428194450.518296-2-slp@redhat.com --- include/uapi/linux/virtio_gpu.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/virtio_gpu.h b/include/uapi/linux/virtio_gpu.h index be109777d10d..4f530d90058c 100644 --- a/include/uapi/linux/virtio_gpu.h +++ b/include/uapi/linux/virtio_gpu.h @@ -64,6 +64,14 @@ * context_init and multiple timelines */ #define VIRTIO_GPU_F_CONTEXT_INIT 4 +/* + * The device provides a valid blob_alignment + * field in its configuration and both + * VIRTIO_GPU_CMD_RESOURCE_CREATE_BLOB and + * VIRTIO_GPU_CMD_RESOURCE_MAP_BLOB requests + * must be aligned to that value. + */ +#define VIRTIO_GPU_F_BLOB_ALIGNMENT 5 enum virtio_gpu_ctrl_type { VIRTIO_GPU_UNDEFINED = 0, @@ -365,6 +373,7 @@ struct virtio_gpu_config { __le32 events_clear; __le32 num_scanouts; __le32 num_capsets; + __le32 blob_alignment; }; /* simple formats for fbcon/X use */ -- cgit v1.2.3 From c4c01c4fd4a3916ffdfb35ad9f511c48e289f51c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Niklas=20S=C3=B6derlund?= Date: Fri, 1 May 2026 21:03:39 +0200 Subject: media: uapi: rkisp: Correct name version enum MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The name of the enum to hold the mapping of parameter buffer versions have a typo in the name, correct it. While this is a uAPI header the impact should be minimal as the enum is only used as a collection for the one version number supported. Fixes: e9d05e9d5db1 ("media: uapi: rkisp1-config: Add extensible params format") Cc: stable@vger.kernel.org Signed-off-by: Niklas Söderlund Reviewed-by: Laurent Pinchart Link: https://patch.msgid.link/20260501190339.3449193-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Laurent Pinchart Signed-off-by: Hans Verkuil --- include/uapi/linux/rkisp1-config.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h index b2d2a71f7baf..7638b2220600 100644 --- a/include/uapi/linux/rkisp1-config.h +++ b/include/uapi/linux/rkisp1-config.h @@ -1535,11 +1535,11 @@ struct rkisp1_ext_params_wdr_config { sizeof(struct rkisp1_ext_params_wdr_config)) /** - * enum rksip1_ext_param_buffer_version - RkISP1 extensible parameters version + * enum rkisp1_ext_param_buffer_version - RkISP1 extensible parameters version * * @RKISP1_EXT_PARAM_BUFFER_V1: First version of RkISP1 extensible parameters */ -enum rksip1_ext_param_buffer_version { +enum rkisp1_ext_param_buffer_version { RKISP1_EXT_PARAM_BUFFER_V1 = V4L2_ISP_PARAMS_VERSION_V1, }; @@ -1601,7 +1601,7 @@ enum rksip1_ext_param_buffer_version { * +---------------------------------------------------------------------+ * * @version: The RkISP1 extensible parameters buffer version, see - * :c:type:`rksip1_ext_param_buffer_version` + * :c:type:`rkisp1_ext_param_buffer_version` * @data_size: The RkISP1 configuration data effective size, excluding this * header * @data: The RkISP1 extensible configuration data blocks -- cgit v1.2.3 From 27caa94f4d13d16f7f63eec879ea7d4d79699415 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Barnab=C3=A1s=20P=C5=91cze?= Date: Mon, 11 May 2026 17:09:57 +0200 Subject: media: rkisp1: Add support for CAC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The CAC block implements chromatic aberration correction. Expose it to userspace using the extensible parameters format. This was tested on the i.MX8MP platform, but based on available documentation it is also present in the RK3399 variant (V10). Thus presumably also in later versions, so no feature flag is introduced. Signed-off-by: Barnabás Pőcze Reviewed-by: Jacopo Mondi Reviewed-by: Laurent Pinchart Link: https://patch.msgid.link/20260511150957.581049-1-barnabas.pocze@ideasonboard.com Signed-off-by: Laurent Pinchart Signed-off-by: Hans Verkuil --- include/uapi/linux/rkisp1-config.h | 107 ++++++++++++++++++++++++++++++++++++- 1 file changed, 106 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h index 7638b2220600..d97384abc157 100644 --- a/include/uapi/linux/rkisp1-config.h +++ b/include/uapi/linux/rkisp1-config.h @@ -967,6 +967,92 @@ struct rkisp1_cif_isp_wdr_config { __u8 use_iref; }; +/* + * enum rkisp1_cif_isp_cac_h_clip_mode - horizontal clipping mode + * + * @RKISP1_CIF_ISP_CAC_H_CLIP_MODE_4PX: +/- 4 pixels + * @RKISP1_CIF_ISP_CAC_H_CLIP_MODE_4_5PX: +/- 4/5 pixels depending on bayer position + */ +enum rkisp1_cif_isp_cac_h_clip_mode { + RKISP1_CIF_ISP_CAC_H_CLIP_MODE_4PX = 0, + RKISP1_CIF_ISP_CAC_H_CLIP_MODE_4_5PX = 1, +}; + +/** + * enum rkisp1_cif_isp_cac_v_clip_mode - vertical clipping mode + * + * @RKISP1_CIF_ISP_CAC_V_CLIP_MODE_2PX: +/- 2 pixels + * @RKISP1_CIF_ISP_CAC_V_CLIP_MODE_3PX: +/- 3 pixels + * @RKISP1_CIF_ISP_CAC_V_CLIP_MODE_3_4PX: +/- 3/4 pixels depending on bayer position + */ +enum rkisp1_cif_isp_cac_v_clip_mode { + RKISP1_CIF_ISP_CAC_V_CLIP_MODE_2PX = 0, + RKISP1_CIF_ISP_CAC_V_CLIP_MODE_3PX = 1, + RKISP1_CIF_ISP_CAC_V_CLIP_MODE_3_4PX = 2, +}; + +/** + * struct rkisp1_cif_isp_cac_config - chromatic aberration correction configuration + * + * The correction is carried out by shifting the red and blue pixels relative + * to the green ones, depending on the distance from the optical center: + * + * @h_count_start: horizontal coordinate of the optical center (13-bit unsigned integer; [1,8191]) + * @v_count_start: vertical coordinate of the optical center (13-bit unsigned integer; [1,8191]) + * + * For each pixel, the x/y distances from the optical center are calculated and + * then transformed into the [0,255] range based on the following formula: + * + * (((d << 4) >> ns) * nf) >> 5 + * + * where `d` is the distance, `ns` and `nf` are the normalization parameters: + * + * @x_nf: horizontal normalization scale parameter (5-bit unsigned integer; [0,31]) + * @x_ns: horizontal normalization shift parameter (4-bit unsigned integer; [0,15]) + * + * @y_nf: vertical normalization scale parameter (5-bit unsigned integer; [0,31]) + * @y_ns: vertical normalization shift parameter (4-bit unsigned integer; [0,15]) + * + * These parameters should be chosen based on the image resolution, the position + * of the optical center, and the shape of pixels, so that no normalized distance + * is larger than 255. If the pixels have square shape, the two sets of parameters + * should be equal. + * + * The actual amount of correction is calculated with a third degree polynomial: + * + * c[0] * r + c[1] * r^2 + c[2] * r^3 + * + * where `c` is the set of coefficients for the given color, and `r` is distance: + * + * @red: red coefficients (5.4 two's complement; [-16,15.9375]) + * @blue: blue coefficients (5.4 two's complement; [-16,15.9375]) + * + * Finally, the amount is clipped as requested: + * + * @h_clip_mode: maximum horizontal shift (from enum rkisp1_cif_isp_cac_h_clip_mode) + * @v_clip_mode: maximum vertical shift (from enum rkisp1_cif_isp_cac_v_clip_mode) + * + * A positive result will shift away from the optical center, while a negative + * one will shift towards the optical center. In the latter case, the pixel + * values at the edges are duplicated. + */ +struct rkisp1_cif_isp_cac_config { + __u8 h_clip_mode; + __u8 v_clip_mode; + + __u16 h_count_start; + __u16 v_count_start; + + __u16 red[3]; + __u16 blue[3]; + + __u8 x_nf; + __u8 x_ns; + + __u8 y_nf; + __u8 y_ns; +}; + /*---------- PART2: Measurement Statistics ------------*/ /** @@ -1138,6 +1224,7 @@ struct rkisp1_stat_buffer { * @RKISP1_EXT_PARAMS_BLOCK_TYPE_COMPAND_EXPAND: Companding expand curve * @RKISP1_EXT_PARAMS_BLOCK_TYPE_COMPAND_COMPRESS: Companding compress curve * @RKISP1_EXT_PARAMS_BLOCK_TYPE_WDR: Wide dynamic range + * @RKISP1_EXT_PARAMS_BLOCK_TYPE_CAC: Chromatic aberration correction */ enum rkisp1_ext_params_block_type { RKISP1_EXT_PARAMS_BLOCK_TYPE_BLS, @@ -1161,6 +1248,7 @@ enum rkisp1_ext_params_block_type { RKISP1_EXT_PARAMS_BLOCK_TYPE_COMPAND_EXPAND, RKISP1_EXT_PARAMS_BLOCK_TYPE_COMPAND_COMPRESS, RKISP1_EXT_PARAMS_BLOCK_TYPE_WDR, + RKISP1_EXT_PARAMS_BLOCK_TYPE_CAC, }; /* For backward compatibility */ @@ -1507,6 +1595,22 @@ struct rkisp1_ext_params_wdr_config { struct rkisp1_cif_isp_wdr_config config; } __attribute__((aligned(8))); +/** + * struct rkisp1_ext_params_cac_config - RkISP1 extensible params CAC config + * + * RkISP1 extensible parameters CAC block. + * Identified by :c:type:`RKISP1_EXT_PARAMS_BLOCK_TYPE_CAC`. + * + * @header: The RkISP1 extensible parameters header, see + * :c:type:`rkisp1_ext_params_block_header` + * @config: CAC configuration, see + * :c:type:`rkisp1_cif_isp_cac_config` + */ +struct rkisp1_ext_params_cac_config { + struct rkisp1_ext_params_block_header header; + struct rkisp1_cif_isp_cac_config config; +} __attribute__((aligned(8))); + /* * The rkisp1_ext_params_compand_curve_config structure is counted twice as it * is used for both the COMPAND_EXPAND and COMPAND_COMPRESS block types. @@ -1532,7 +1636,8 @@ struct rkisp1_ext_params_wdr_config { sizeof(struct rkisp1_ext_params_compand_bls_config) +\ sizeof(struct rkisp1_ext_params_compand_curve_config) +\ sizeof(struct rkisp1_ext_params_compand_curve_config) +\ - sizeof(struct rkisp1_ext_params_wdr_config)) + sizeof(struct rkisp1_ext_params_wdr_config) +\ + sizeof(struct rkisp1_ext_params_cac_config)) /** * enum rkisp1_ext_param_buffer_version - RkISP1 extensible parameters version -- cgit v1.2.3 From 0850005c26d2623f3d77489cf27d342191a97b5c Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Mon, 18 May 2026 16:25:00 +0800 Subject: net: dsa: add NETC switch tag support The NXP NETC switch tag is a proprietary header added to frames after the source MAC address. The switch tag has 3 types, and each type has 1 ~ 4 subtypes, the details are as follows. Forward NXP switch tag (Type=0): Represents forwarded frames. - SubType = 0 - Normal frame processing. To_Port NXP switch tag (Type=1): Represents frames that are to be sent to a specific switch port. - SubType = 0. No request to perform timestamping. - SubType = 1. Request to perform one-step timestamping. - SubType = 2. Request to perform two-step timestamping. - SubType = 3. Request to perform both one-step timestamping and two-step timestamping. To_Host NXP switch tag (Type=2): Represents frames redirected or copied to the switch management port. - SubType = 0. Received frames redirected or copied to the switch management port. - SubType = 1. Received frames redirected or copied to the switch management port with captured timestamp at the switch port where the frame was received. - SubType = 2. Transmit timestamp response (two-step timestamping). In addition, the length of different type switch tag is different, the minimum length is 6 bytes, the maximum length is 14 bytes. Currently, Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are supported. More tags will be supported in the future. Signed-off-by: Wei Fang Link: https://patch.msgid.link/20260518082506.1318236-10-wei.fang@nxp.com Signed-off-by: Paolo Abeni --- include/uapi/linux/if_ether.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index df9d44a11540..fb5efc8e06cc 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -123,6 +123,7 @@ #define ETH_P_DSA_A5PSW 0xE001 /* A5PSW Tag Value [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_NXP_NETC 0xFD3A /* NXP NETC DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is more than this value * then the frame is Ethernet II. Else it is 802.3 */ -- cgit v1.2.3 From 8b82cacad92ebae9619872a5a69c570eba30140b Mon Sep 17 00:00:00 2001 From: Dorjoy Chowdhury Date: Sat, 16 May 2026 16:42:39 +0200 Subject: openat2: new OPENAT2_REGULAR flag support This flag indicates the path should be opened if it's a regular file. This is useful to write secure programs that want to avoid being tricked into opening device nodes with special semantics while thinking they operate on regular files. This is a requested feature from the uapi-group[1]. The previously introduced EFTYPE error code is returned when the path doesn't refer to a regular file. For example, if openat2 is called on path /dev/null with OPENAT2_REGULAR in the flag param, it will return -EFTYPE. When used in combination with O_CREAT, either the regular file is created, or if the path already exists, it is opened if it's a regular file. Otherwise, -EFTYPE is returned. When OPENAT2_REGULAR is combined with O_DIRECTORY, -EINVAL is returned as it doesn't make sense to open a path that is both a directory and a regular file. The UAPI bit lives in the upper 32 bits of open_how::flags (((__u64)1 << 32)) so that open(2) and openat(2) -- whose @flags argument is a C int -- cannot physically express it. This is a structural guarantee, not a runtime mask: the bit is unrepresentable in 32 bits. Because the rest of the VFS open path narrows to 32 bits in several places (op->open_flag, f->f_flags, the unsigned open_flag argument of i_op->atomic_open()), build_open_flags() translates OPENAT2_REGULAR into a kernel-internal lower-32-bit carrier __O_REGULAR (bit 4, unused as an O_* on every architecture) before the assignment to op->open_flag. __O_REGULAR then rides through the existing channels exactly like __FMODE_EXEC. do_dentry_open() strips it so it cannot leak back to userspace via fcntl(F_GETFL). Four BUILD_BUG_ON_MSG() invariants in build_open_flags() prevent any future bit collision or accidental low-32 redefinition: - VALID_OPEN_FLAGS fits in 32 bits. - OPENAT2_REGULAR lives in the upper 32 bits. - OPENAT2_REGULAR does not alias any open()/openat() flag. - __O_REGULAR does not alias any user-visible flag. [1]: https://uapi-group.org/kernel-features/#ability-to-only-open-regular-files Christian Brauner says: Move OPENAT2_REGULAR to the upper 32 bits of open_how::flags with a kernel-internal __O_REGULAR carrier so that open(2)/openat(2) cannot encode the flag; add BUILD_BUG_ON_MSG() invariants and register __O_REGULAR in the fcntl_init() allocation-uniqueness BUILD_BUG_ON() (bit count 21 -> 22). Signed-off-by: Dorjoy Chowdhury Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com Reviewed-by: Jeff Layton Reviewed-by: Aleksa Sarai Signed-off-by: Christian Brauner (Amutable) --- include/uapi/linux/openat2.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/openat2.h b/include/uapi/linux/openat2.h index a5feb7604948..575c2c59d14a 100644 --- a/include/uapi/linux/openat2.h +++ b/include/uapi/linux/openat2.h @@ -22,6 +22,13 @@ struct open_how { __u64 resolve; }; +/* + * how->flags bits exclusive to openat2(2). These live in the upper 32 bits + * of @flags so that they cannot be expressed by open(2) / openat(2), whose + * @flags argument is a C int. + */ +#define OPENAT2_REGULAR ((__u64)1 << 32) /* Only open regular files. */ + /* how->resolve flags for openat2(2). */ #define RESOLVE_NO_XDEV 0x01 /* Block mount-point crossings (includes bind-mounts). */ -- cgit v1.2.3 From 0719e10d826aa0ba4840917d0261986eaead9a51 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Tue, 19 May 2026 12:44:32 +0100 Subject: io_uring/zcrx: notify user when out of buffers There are currently no easy ways for the user to know if zcrx is out of buffers and page pool fails to allocate. Add uapi for zcrx to communicate it back. It's implemented as a separate CQE, which for now is posted to the creator ctx. To use it, on registration the user space needs to pass an instance of struct zcrx_notification_desc, which tells the kernel the user_data for resulting CQEs and which event types are expected / allowed. When an allowed event happens, zcrx will post a CQE containing the specified user_data, and lower bits of cqe->res will be set to the event mask. Before the kernel could post another notification of the given type, the user needs to acknowledge that it processed the previous one by issuing IORING_REGISTER_ZCRX_CTRL with ZCRX_CTRL_ARM_NOTIFICATION. The only notification type the patch implements is ZCRX_NOTIF_NO_BUFFERS, but we'll need more of them in the future. Co-developed-by: Vishwanath Seshagiri Signed-off-by: Pavel Begunkov Signed-off-by: Vishwanath Seshagiri Link: https://patch.msgid.link/35cd307a03a43583838a2e151fc641c69abd786f.1779189667.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- include/uapi/linux/io_uring/zcrx.h | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/io_uring/zcrx.h b/include/uapi/linux/io_uring/zcrx.h index 5ce02c7a6096..67185566ad3c 100644 --- a/include/uapi/linux/io_uring/zcrx.h +++ b/include/uapi/linux/io_uring/zcrx.h @@ -65,6 +65,20 @@ enum zcrx_features { * value in struct io_uring_zcrx_ifq_reg::rx_buf_len. */ ZCRX_FEATURE_RX_PAGE_SIZE = 1 << 0, + ZCRX_FEATURE_NOTIFICATION = 1 << 1, +}; + +enum zcrx_notification_type { + ZCRX_NOTIF_NO_BUFFERS, + + __ZCRX_NOTIF_TYPE_LAST, +}; + +struct zcrx_notification_desc { + __u64 user_data; + __u32 type_mask; + __u32 __resv1; + __u64 __resv2[10]; }; /* @@ -82,12 +96,14 @@ struct io_uring_zcrx_ifq_reg { struct io_uring_zcrx_offsets offsets; __u32 zcrx_id; __u32 rx_buf_len; - __u64 __resv[3]; + __u64 notif_desc; /* see struct zcrx_notification_desc */ + __u64 __resv[2]; }; enum zcrx_ctrl_op { ZCRX_CTRL_FLUSH_RQ, ZCRX_CTRL_EXPORT, + ZCRX_CTRL_ARM_NOTIFICATION, __ZCRX_CTRL_LAST, }; @@ -101,6 +117,11 @@ struct zcrx_ctrl_export { __u32 __resv1[11]; }; +struct zcrx_ctrl_arm_notif { + __u32 notif_type; + __u32 __resv[11]; +}; + struct zcrx_ctrl { __u32 zcrx_id; __u32 op; /* see enum zcrx_ctrl_op */ @@ -109,6 +130,7 @@ struct zcrx_ctrl { union { struct zcrx_ctrl_export zc_export; struct zcrx_ctrl_flush_rq zc_flush; + struct zcrx_ctrl_arm_notif zc_arm_notif; }; }; -- cgit v1.2.3 From 255180f7034f48aa5b0c8df70228307394bddbb9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Cl=C3=A9ment=20L=C3=A9ger?= Date: Tue, 19 May 2026 12:44:33 +0100 Subject: io_uring/zcrx: notify user on frag copy fallback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a ZCRX_NOTIF_COPY notification type to signal userspace when a received fragment could not be delivered using zero-copy and was instead copied into a buffer. Signed-off-by: Clément Léger Signed-off-by: Pavel Begunkov Link: https://patch.msgid.link/3d54bcd8bf10b3a1e88beb0cd39c40c3937bea4f.1779189667.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- include/uapi/linux/io_uring/zcrx.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/io_uring/zcrx.h b/include/uapi/linux/io_uring/zcrx.h index 67185566ad3c..3f7b72b09878 100644 --- a/include/uapi/linux/io_uring/zcrx.h +++ b/include/uapi/linux/io_uring/zcrx.h @@ -70,6 +70,7 @@ enum zcrx_features { enum zcrx_notification_type { ZCRX_NOTIF_NO_BUFFERS, + ZCRX_NOTIF_COPY, __ZCRX_NOTIF_TYPE_LAST, }; -- cgit v1.2.3 From 6935f631465f5f60205978a59228a26db4723d51 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Cl=C3=A9ment=20L=C3=A9ger?= Date: Tue, 19 May 2026 12:44:34 +0100 Subject: io_uring/zcrx: add shared-memory notification statistics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for an optional stats struct embedded in the refill queue region, allowing userspace to monitor copy-fallback in real-time. Userspace queries the stats struct size and alignment via IO_URING_QUERY_ZCRX_NOTIF (notif_stats_size / notif_stats_alignment), then provides a stats_offset in zcrx_notification_desc pointing to a location within the refill queue region. The kernel updates the stats counters in-place on every copy-fallback event. Signed-off-by: Clément Léger [pavel: rename io_uring_zcrx_notif_stats] Signed-off-by: Pavel Begunkov Link: https://patch.msgid.link/f6af5a21015efea4b733b9d77aba22c637788fe4.1779189667.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- include/uapi/linux/io_uring/query.h | 12 ++++++++++++ include/uapi/linux/io_uring/zcrx.h | 15 +++++++++++++-- 2 files changed, 25 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/io_uring/query.h b/include/uapi/linux/io_uring/query.h index 95500759cc13..1a68eca7c6b4 100644 --- a/include/uapi/linux/io_uring/query.h +++ b/include/uapi/linux/io_uring/query.h @@ -23,6 +23,7 @@ enum { IO_URING_QUERY_OPCODES = 0, IO_URING_QUERY_ZCRX = 1, IO_URING_QUERY_SCQ = 2, + IO_URING_QUERY_ZCRX_NOTIF = 3, __IO_URING_QUERY_MAX, }; @@ -62,6 +63,17 @@ struct io_uring_query_zcrx { __u64 __resv2; }; +struct io_uring_query_zcrx_notif { + /* Bitmask of supported ZCRX_NOTIF_* flags */ + __u32 notif_flags; + /* Size of io_uring_zcrx_notif_stats */ + __u32 notif_stats_size; + /* Required alignment for the stats struct within the region (ie stats_offset) */ + __u32 notif_stats_off_alignment; + __u32 __resv1; + __u64 __resv2[4]; +}; + struct io_uring_query_scq { /* The SQ/CQ rings header size */ __u64 hdr_size; diff --git a/include/uapi/linux/io_uring/zcrx.h b/include/uapi/linux/io_uring/zcrx.h index 3f7b72b09878..15c05c45ce36 100644 --- a/include/uapi/linux/io_uring/zcrx.h +++ b/include/uapi/linux/io_uring/zcrx.h @@ -75,11 +75,22 @@ enum zcrx_notification_type { __ZCRX_NOTIF_TYPE_LAST, }; +enum zcrx_notification_desc_flags { + /* If set, stats_offset holds a valid offset to a notif_stats struct */ + ZCRX_NOTIF_DESC_FLAG_STATS = 1 << 0, +}; + +struct zcrx_notif_stats { + __u64 copy_count; /* cumulative copy-fallback CQEs */ + __u64 copy_bytes; /* cumulative bytes copied */ +}; + struct zcrx_notification_desc { __u64 user_data; __u32 type_mask; - __u32 __resv1; - __u64 __resv2[10]; + __u32 flags; /* see enum zcrx_notification_desc_flags */ + __u64 stats_offset; /* offset from the beginning of refill ring region for stats */ + __u64 __resv2[9]; }; /* -- cgit v1.2.3 From 0b13c6a618d09b20dbb1a33bc354764cbac6f2bd Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Fri, 22 May 2026 16:55:08 -0600 Subject: llc: Add SPDX id lines to some llc source files Most of the lls source files are missing SPDX-License-Identifier lines. Add appropriate IDs to these files, and remove other license info from the header. In once case, leave the existing id line and just remove the license reference text. Signed-off-by: Tim Bird Link: https://patch.msgid.link/20260522225508.24006-1-tim.bird@sony.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/llc.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/llc.h b/include/uapi/linux/llc.h index cf8806b14d5f..2ffd81f9cc01 100644 --- a/include/uapi/linux/llc.h +++ b/include/uapi/linux/llc.h @@ -3,13 +3,6 @@ * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators. * * Copyright (c) 2001 by Jay Schulist - * - * This program can be redistributed or modified under the terms of the - * GNU General Public License as published by the Free Software Foundation. - * This program is distributed without any warranty or implied warranty - * of merchantability or fitness for a particular purpose. - * - * See the GNU General Public License for more details. */ #ifndef _UAPI__LINUX_LLC_H #define _UAPI__LINUX_LLC_H -- cgit v1.2.3 From 91561e1dc94b8a33857370ef3c5b5523c4461d5b Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Thu, 21 May 2026 13:34:20 -0700 Subject: PCI: Add pci_ats_required() for CXL.cache capable devices Controlled by IOMMU drivers, ATS can be enabled "on demand", when a given PASID on a device is attached to an I/O page table. This is working, even when a device has no translation on its RID (i.e., RID is IOMMU bypassed). However, certain PCIe devices require non-PASID ATS on their RID even when the RID is IOMMU bypassed. Call this "ATS always on" in IOMMU term. For example, CXL spec r4.0 notes in sec 3.2.5.13 Memory Type on CXL.cache: "To source requests on CXL.cache, devices need to get the Host Physical Address (HPA) from the Host by means of an ATS request on CXL.io." In other words, the CXL.cache capability requires ATS; otherwise, it can't access host physical memory. Introduce a new pci_ats_required() helper for the IOMMU driver to scan a PCI device and shift ATS policies between "on demand" and "always on". Add the support for CXL.cache devices first. Pre-CXL devices will be added in quirks.c file. Note that pci_ats_required() validates against pci_ats_supported(), so we ensure that untrusted devices (e.g. external ports) will not be always on. This maintains the existing ATS security policy regarding potential side- channel attacks via ATS. Cc: linux-cxl@vger.kernel.org Suggested-by: Vikram Sethi Suggested-by: Jason Gunthorpe Reviewed-by: Jonathan Cameron Reviewed-by: Jason Gunthorpe Reviewed-by: Kevin Tian Tested-by: Nirmoy Das Acked-by: Nirmoy Das Reviewed-by: Dave Jiang Acked-by: Bjorn Helgaas Signed-off-by: Nicolin Chen Reviewed-by: Yi Liu Signed-off-by: Joerg Roedel --- include/uapi/linux/pci_regs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 14f634ab9350..6ac45be1008b 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -1349,6 +1349,7 @@ /* CXL r4.0, 8.1.3: PCIe DVSEC for CXL Device */ #define PCI_DVSEC_CXL_DEVICE 0 #define PCI_DVSEC_CXL_CAP 0xA +#define PCI_DVSEC_CXL_CACHE_CAPABLE _BITUL(0) #define PCI_DVSEC_CXL_MEM_CAPABLE _BITUL(2) #define PCI_DVSEC_CXL_HDM_COUNT __GENMASK(5, 4) #define PCI_DVSEC_CXL_CTRL 0xC -- cgit v1.2.3 From 622775dbc56a6349fc98b368041e3224bfeeb9de Mon Sep 17 00:00:00 2001 From: Liviu Stan Date: Mon, 25 May 2026 19:39:34 +0300 Subject: iio: core: Add IIO_COVERAGE channel type Add a new channel type for sensors that report fractional coverage as a percentage. The sysfs attribute is in_coverageY_raw; after applying in_coverageY_scale the value is in percent. The first user is the ADT7604 leak detector, where the value represents the portion of the sensing element that is wetted. Signed-off-by: Liviu Stan Signed-off-by: Jonathan Cameron --- include/uapi/linux/iio/types.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index d7c2bb223651..c9295c707041 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -53,6 +53,7 @@ enum iio_chan_type { IIO_CHROMATICITY, IIO_ATTENTION, IIO_ALTCURRENT, + IIO_COVERAGE, }; enum iio_modifier { -- cgit v1.2.3 From 4c08a9f38c50c0df7091b5567be7a3bbac92de0b Mon Sep 17 00:00:00 2001 From: Luca Boccassi Date: Wed, 29 Apr 2026 22:21:16 +0100 Subject: liveupdate: add LIVEUPDATE_SESSION_GET_NAME ioctl Userspace when requesting a session via the ioctl specifies a name and gets a FD, but then there is no ioctl to go back the other way and get the name given a LUO session FD. This is problematic especially when there is a userspace orchestrator that wants to check what FDs it is handling for clients without having to do manual string scraping of procfs, or without procfs at all. Add a ioctl to simply get the name from an FD. Signed-off-by: Luca Boccassi Reviewed-by: Pasha Tatashin Reviewed-by: Pratyush Yadav Link: https://lore.kernel.org/r/20260429212221.814107-4-luca.boccassi@gmail.com Signed-off-by: Pasha Tatashin Signed-off-by: Mike Rapoport (Microsoft) --- include/uapi/linux/liveupdate.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/liveupdate.h b/include/uapi/linux/liveupdate.h index 30bc66ee9436..3a9ff53b02e0 100644 --- a/include/uapi/linux/liveupdate.h +++ b/include/uapi/linux/liveupdate.h @@ -59,6 +59,7 @@ enum { LIVEUPDATE_CMD_SESSION_PRESERVE_FD = LIVEUPDATE_CMD_SESSION_BASE, LIVEUPDATE_CMD_SESSION_RETRIEVE_FD = 0x41, LIVEUPDATE_CMD_SESSION_FINISH = 0x42, + LIVEUPDATE_CMD_SESSION_GET_NAME = 0x43, }; /** @@ -213,4 +214,24 @@ struct liveupdate_session_finish { #define LIVEUPDATE_SESSION_FINISH \ _IO(LIVEUPDATE_IOCTL_TYPE, LIVEUPDATE_CMD_SESSION_FINISH) +/** + * struct liveupdate_session_get_name - ioctl(LIVEUPDATE_SESSION_GET_NAME) + * @size: Input; sizeof(struct liveupdate_session_get_name) + * @reserved: Input; Must be zero. Reserved for future use. + * @name: Output; A null-terminated string with the full session name. + * + * Retrieves the full name of the session associated with this file descriptor. + * This is useful because the kernel may truncate the name shown in /proc. + * + * Return: 0 on success, negative error code on failure. + */ +struct liveupdate_session_get_name { + __u32 size; + __u32 reserved; + __u8 name[LIVEUPDATE_SESSION_NAME_LENGTH]; +}; + +#define LIVEUPDATE_SESSION_GET_NAME \ + _IO(LIVEUPDATE_IOCTL_TYPE, LIVEUPDATE_CMD_SESSION_GET_NAME) + #endif /* _UAPI_LIVEUPDATE_H */ -- cgit v1.2.3 From af81cb247ca94e4bcfea31ea862cf3aaf955a503 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 25 Mar 2026 10:40:28 -0400 Subject: sunrpc: add a generic netlink family for cache upcalls The auth.unix.ip and auth.unix.gid caches live in the sunrpc module, so they cannot use the nfsd generic netlink family. Create a new "sunrpc" generic netlink family with its own "exportd" multicast group to support cache upcall notifications for sunrpc-resident caches. Define a YAML spec (sunrpc_cache.yaml) with a cache-type enum (ip_map, unix_gid), a cache-notify multicast event, and the corresponding uapi header. Implement sunrpc_cache_notify() in cache.c, which checks for listeners on the exportd multicast group, builds and sends a SUNRPC_CMD_CACHE_NOTIFY message with the cache-type attribute. Register/unregister the sunrpc_nl_family in init_sunrpc() and cleanup_sunrpc(). Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever --- include/uapi/linux/sunrpc_netlink.h | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 include/uapi/linux/sunrpc_netlink.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sunrpc_netlink.h b/include/uapi/linux/sunrpc_netlink.h new file mode 100644 index 000000000000..6135d9b3eef1 --- /dev/null +++ b/include/uapi/linux/sunrpc_netlink.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/sunrpc_cache.yaml */ +/* YNL-GEN uapi header */ +/* To regenerate run: tools/net/ynl/ynl-regen.sh */ + +#ifndef _UAPI_LINUX_SUNRPC_NETLINK_H +#define _UAPI_LINUX_SUNRPC_NETLINK_H + +#define SUNRPC_FAMILY_NAME "sunrpc" +#define SUNRPC_FAMILY_VERSION 1 + +enum sunrpc_cache_type { + SUNRPC_CACHE_TYPE_IP_MAP = 1, + SUNRPC_CACHE_TYPE_UNIX_GID = 2, +}; + +enum { + SUNRPC_A_CACHE_NOTIFY_CACHE_TYPE = 1, + + __SUNRPC_A_CACHE_NOTIFY_MAX, + SUNRPC_A_CACHE_NOTIFY_MAX = (__SUNRPC_A_CACHE_NOTIFY_MAX - 1) +}; + +enum { + SUNRPC_CMD_CACHE_NOTIFY = 1, + + __SUNRPC_CMD_MAX, + SUNRPC_CMD_MAX = (__SUNRPC_CMD_MAX - 1) +}; + +#define SUNRPC_MCGRP_NONE "none" +#define SUNRPC_MCGRP_EXPORTD "exportd" + +#endif /* _UAPI_LINUX_SUNRPC_NETLINK_H */ -- cgit v1.2.3 From 712bdbb2153bdb99d4a9d0cdcae24b484610147f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 25 Mar 2026 10:40:29 -0400 Subject: sunrpc: add netlink upcall for the auth.unix.ip cache Add netlink-based cache upcall support for the ip_map (auth.unix.ip) cache, using the sunrpc generic netlink family. Add ip-map attribute-set (seqno, class, addr, domain, negative, expiry), ip-map-reqs wrapper, and ip-map-get-reqs / ip-map-set-reqs operations to the sunrpc_cache YAML spec and generated headers. Implement sunrpc_nl_ip_map_get_reqs_dumpit() which snapshots pending ip_map cache requests and sends each entry's seqno, class name, and IP address over netlink. Implement sunrpc_nl_ip_map_set_reqs_doit() which parses ip_map cache responses from userspace (class, addr, expiry, and domain name or negative flag) and updates the cache via __ip_map_lookup() / __ip_map_update(). Wire up ip_map_notify() callback in ip_map_cache_template so cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with SUNRPC_CACHE_TYPE_IP_MAP. Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever --- include/uapi/linux/sunrpc_netlink.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sunrpc_netlink.h b/include/uapi/linux/sunrpc_netlink.h index 6135d9b3eef1..b44befb5a34b 100644 --- a/include/uapi/linux/sunrpc_netlink.h +++ b/include/uapi/linux/sunrpc_netlink.h @@ -22,8 +22,29 @@ enum { SUNRPC_A_CACHE_NOTIFY_MAX = (__SUNRPC_A_CACHE_NOTIFY_MAX - 1) }; +enum { + SUNRPC_A_IP_MAP_SEQNO = 1, + SUNRPC_A_IP_MAP_CLASS, + SUNRPC_A_IP_MAP_ADDR, + SUNRPC_A_IP_MAP_DOMAIN, + SUNRPC_A_IP_MAP_NEGATIVE, + SUNRPC_A_IP_MAP_EXPIRY, + + __SUNRPC_A_IP_MAP_MAX, + SUNRPC_A_IP_MAP_MAX = (__SUNRPC_A_IP_MAP_MAX - 1) +}; + +enum { + SUNRPC_A_IP_MAP_REQS_REQUESTS = 1, + + __SUNRPC_A_IP_MAP_REQS_MAX, + SUNRPC_A_IP_MAP_REQS_MAX = (__SUNRPC_A_IP_MAP_REQS_MAX - 1) +}; + enum { SUNRPC_CMD_CACHE_NOTIFY = 1, + SUNRPC_CMD_IP_MAP_GET_REQS, + SUNRPC_CMD_IP_MAP_SET_REQS, __SUNRPC_CMD_MAX, SUNRPC_CMD_MAX = (__SUNRPC_CMD_MAX - 1) -- cgit v1.2.3 From 0850e8603cd7a3a17e2888391937154a54b93e02 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 25 Mar 2026 10:40:30 -0400 Subject: sunrpc: add netlink upcall for the auth.unix.gid cache Add netlink-based cache upcall support for the unix_gid (auth.unix.gid) cache, using the sunrpc generic netlink family. Add unix-gid attribute-set (seqno, uid, gids multi-attr, negative, expiry), unix-gid-reqs wrapper, and unix-gid-get-reqs / unix-gid-set-reqs operations to the sunrpc_cache YAML spec and generated headers. Implement sunrpc_nl_unix_gid_get_reqs_dumpit() which snapshots pending unix_gid cache requests and sends each entry's seqno and uid over netlink. Implement sunrpc_nl_unix_gid_set_reqs_doit() which parses unix_gid cache responses from userspace (uid, expiry, gids as u32 multi-attr or negative flag) and updates the cache via unix_gid_lookup() / sunrpc_cache_update(). Wire up unix_gid_notify() callback in unix_gid_cache_template so cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with SUNRPC_CACHE_TYPE_UNIX_GID. Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever --- include/uapi/linux/sunrpc_netlink.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sunrpc_netlink.h b/include/uapi/linux/sunrpc_netlink.h index b44befb5a34b..d71c623e92ab 100644 --- a/include/uapi/linux/sunrpc_netlink.h +++ b/include/uapi/linux/sunrpc_netlink.h @@ -41,10 +41,30 @@ enum { SUNRPC_A_IP_MAP_REQS_MAX = (__SUNRPC_A_IP_MAP_REQS_MAX - 1) }; +enum { + SUNRPC_A_UNIX_GID_SEQNO = 1, + SUNRPC_A_UNIX_GID_UID, + SUNRPC_A_UNIX_GID_GIDS, + SUNRPC_A_UNIX_GID_NEGATIVE, + SUNRPC_A_UNIX_GID_EXPIRY, + + __SUNRPC_A_UNIX_GID_MAX, + SUNRPC_A_UNIX_GID_MAX = (__SUNRPC_A_UNIX_GID_MAX - 1) +}; + +enum { + SUNRPC_A_UNIX_GID_REQS_REQUESTS = 1, + + __SUNRPC_A_UNIX_GID_REQS_MAX, + SUNRPC_A_UNIX_GID_REQS_MAX = (__SUNRPC_A_UNIX_GID_REQS_MAX - 1) +}; + enum { SUNRPC_CMD_CACHE_NOTIFY = 1, SUNRPC_CMD_IP_MAP_GET_REQS, SUNRPC_CMD_IP_MAP_SET_REQS, + SUNRPC_CMD_UNIX_GID_GET_REQS, + SUNRPC_CMD_UNIX_GID_SET_REQS, __SUNRPC_CMD_MAX, SUNRPC_CMD_MAX = (__SUNRPC_CMD_MAX - 1) -- cgit v1.2.3 From 912fc994b920a24543725d981e9cd082d1376ed7 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 25 Mar 2026 10:40:31 -0400 Subject: nfsd: add netlink upcall for the svc_export cache Add netlink-based cache upcall support for the svc_export (nfsd.export) cache to Documentation/netlink/specs/nfsd.yaml and regenerate the resulting files. Implement nfsd_cache_notify() which sends a NFSD_CMD_CACHE_NOTIFY multicast event to the "exportd" group, carrying the cache type so userspace knows which cache has pending requests. Implement nfsd_nl_svc_export_get_reqs_dumpit() which snapshots pending svc_export cache requests and sends each entry's seqno, client name, and path over netlink. Implement nfsd_nl_svc_export_set_reqs_doit() which parses svc_export cache responses from userspace (client, path, expiry, flags, anon uid/gid, fslocations, uuid, secinfo, xprtsec, fsid, or negative flag) and updates the cache via svc_export_lookup() / svc_export_update(). Wire up the svc_export_notify() callback in svc_export_cache_template so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with NFSD_CACHE_TYPE_SVC_EXPORT. Note that the export-flags and xprtsec-mode enums are organized to match their counterparts in include/uapi/linux/nfsd/export.h. The intent is that future export options will only be added to the netlink headers, which should eliminate the need to keep so much in sync. Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever --- include/uapi/linux/nfsd_netlink.h | 101 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfsd_netlink.h b/include/uapi/linux/nfsd_netlink.h index 97c7447f4d14..32a551b320e0 100644 --- a/include/uapi/linux/nfsd_netlink.h +++ b/include/uapi/linux/nfsd_netlink.h @@ -10,6 +10,52 @@ #define NFSD_FAMILY_NAME "nfsd" #define NFSD_FAMILY_VERSION 1 +enum nfsd_cache_type { + NFSD_CACHE_TYPE_SVC_EXPORT = 1, +}; + +/* + * These flags are ordered to match the NFSEXP_* flags in + * include/linux/nfsd/export.h + */ +enum nfsd_export_flags { + NFSD_EXPORT_FLAGS_READONLY = 1, + NFSD_EXPORT_FLAGS_INSECURE_PORT = 2, + NFSD_EXPORT_FLAGS_ROOTSQUASH = 4, + NFSD_EXPORT_FLAGS_ALLSQUASH = 8, + NFSD_EXPORT_FLAGS_ASYNC = 16, + NFSD_EXPORT_FLAGS_GATHERED_WRITES = 32, + NFSD_EXPORT_FLAGS_NOREADDIRPLUS = 64, + NFSD_EXPORT_FLAGS_SECURITY_LABEL = 128, + NFSD_EXPORT_FLAGS_SIGN_FH = 256, + NFSD_EXPORT_FLAGS_NOHIDE = 512, + NFSD_EXPORT_FLAGS_NOSUBTREECHECK = 1024, + NFSD_EXPORT_FLAGS_NOAUTHNLM = 2048, + NFSD_EXPORT_FLAGS_MSNFS = 4096, + NFSD_EXPORT_FLAGS_FSID = 8192, + NFSD_EXPORT_FLAGS_CROSSMOUNT = 16384, + NFSD_EXPORT_FLAGS_NOACL = 32768, + NFSD_EXPORT_FLAGS_V4ROOT = 65536, + NFSD_EXPORT_FLAGS_PNFS = 131072, +}; + +/* + * These flags are ordered to match the NFSEXP_XPRTSEC_* flags in + * include/linux/nfsd/export.h + */ +enum nfsd_xprtsec_mode { + NFSD_XPRTSEC_MODE_NONE = 1, + NFSD_XPRTSEC_MODE_TLS = 2, + NFSD_XPRTSEC_MODE_MTLS = 4, +}; + +enum { + NFSD_A_CACHE_NOTIFY_CACHE_TYPE = 1, + + __NFSD_A_CACHE_NOTIFY_MAX, + NFSD_A_CACHE_NOTIFY_MAX = (__NFSD_A_CACHE_NOTIFY_MAX - 1) +}; + enum { NFSD_A_RPC_STATUS_XID = 1, NFSD_A_RPC_STATUS_FLAGS, @@ -81,6 +127,55 @@ enum { NFSD_A_POOL_MODE_MAX = (__NFSD_A_POOL_MODE_MAX - 1) }; +enum { + NFSD_A_FSLOCATION_HOST = 1, + NFSD_A_FSLOCATION_PATH, + + __NFSD_A_FSLOCATION_MAX, + NFSD_A_FSLOCATION_MAX = (__NFSD_A_FSLOCATION_MAX - 1) +}; + +enum { + NFSD_A_FSLOCATIONS_LOCATION = 1, + + __NFSD_A_FSLOCATIONS_MAX, + NFSD_A_FSLOCATIONS_MAX = (__NFSD_A_FSLOCATIONS_MAX - 1) +}; + +enum { + NFSD_A_AUTH_FLAVOR_PSEUDOFLAVOR = 1, + NFSD_A_AUTH_FLAVOR_FLAGS, + + __NFSD_A_AUTH_FLAVOR_MAX, + NFSD_A_AUTH_FLAVOR_MAX = (__NFSD_A_AUTH_FLAVOR_MAX - 1) +}; + +enum { + NFSD_A_SVC_EXPORT_SEQNO = 1, + NFSD_A_SVC_EXPORT_CLIENT, + NFSD_A_SVC_EXPORT_PATH, + NFSD_A_SVC_EXPORT_NEGATIVE, + NFSD_A_SVC_EXPORT_EXPIRY, + NFSD_A_SVC_EXPORT_ANON_UID, + NFSD_A_SVC_EXPORT_ANON_GID, + NFSD_A_SVC_EXPORT_FSLOCATIONS, + NFSD_A_SVC_EXPORT_UUID, + NFSD_A_SVC_EXPORT_SECINFO, + NFSD_A_SVC_EXPORT_XPRTSEC, + NFSD_A_SVC_EXPORT_FLAGS, + NFSD_A_SVC_EXPORT_FSID, + + __NFSD_A_SVC_EXPORT_MAX, + NFSD_A_SVC_EXPORT_MAX = (__NFSD_A_SVC_EXPORT_MAX - 1) +}; + +enum { + NFSD_A_SVC_EXPORT_REQS_REQUESTS = 1, + + __NFSD_A_SVC_EXPORT_REQS_MAX, + NFSD_A_SVC_EXPORT_REQS_MAX = (__NFSD_A_SVC_EXPORT_REQS_MAX - 1) +}; + enum { NFSD_CMD_RPC_STATUS_GET = 1, NFSD_CMD_THREADS_SET, @@ -91,9 +186,15 @@ enum { NFSD_CMD_LISTENER_GET, NFSD_CMD_POOL_MODE_SET, NFSD_CMD_POOL_MODE_GET, + NFSD_CMD_CACHE_NOTIFY, + NFSD_CMD_SVC_EXPORT_GET_REQS, + NFSD_CMD_SVC_EXPORT_SET_REQS, __NFSD_CMD_MAX, NFSD_CMD_MAX = (__NFSD_CMD_MAX - 1) }; +#define NFSD_MCGRP_NONE "none" +#define NFSD_MCGRP_EXPORTD "exportd" + #endif /* _UAPI_LINUX_NFSD_NETLINK_H */ -- cgit v1.2.3 From 01c2305795a3b6b164df48e72b12022a68fd60c1 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 25 Mar 2026 10:40:32 -0400 Subject: nfsd: add netlink upcall for the nfsd.fh cache Add netlink-based cache upcall support for the expkey (nfsd.fh) cache, following the same pattern as the existing svc_export netlink support. Add expkey to the cache-type enum, a new expkey attribute-set with client, fsidtype, fsid, negative, expiry, and path fields, and the expkey-get-reqs / expkey-set-reqs operations to the nfsd YAML spec and generated headers. Implement nfsd_nl_expkey_get_reqs_dumpit() which snapshots pending expkey cache requests and sends each entry's seqno, client name, fsidtype, and fsid over netlink. Implement nfsd_nl_expkey_set_reqs_doit() which parses expkey cache responses from userspace (client, fsidtype, fsid, expiry, and path or negative flag) and updates the cache via svc_expkey_lookup() / svc_expkey_update(). Wire up the expkey_notify() callback in svc_expkey_cache_template so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with NFSD_CACHE_TYPE_EXPKEY. Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever --- include/uapi/linux/nfsd_netlink.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfsd_netlink.h b/include/uapi/linux/nfsd_netlink.h index 32a551b320e0..fed7533c1533 100644 --- a/include/uapi/linux/nfsd_netlink.h +++ b/include/uapi/linux/nfsd_netlink.h @@ -12,6 +12,7 @@ enum nfsd_cache_type { NFSD_CACHE_TYPE_SVC_EXPORT = 1, + NFSD_CACHE_TYPE_EXPKEY = 2, }; /* @@ -176,6 +177,26 @@ enum { NFSD_A_SVC_EXPORT_REQS_MAX = (__NFSD_A_SVC_EXPORT_REQS_MAX - 1) }; +enum { + NFSD_A_EXPKEY_SEQNO = 1, + NFSD_A_EXPKEY_CLIENT, + NFSD_A_EXPKEY_FSIDTYPE, + NFSD_A_EXPKEY_FSID, + NFSD_A_EXPKEY_NEGATIVE, + NFSD_A_EXPKEY_EXPIRY, + NFSD_A_EXPKEY_PATH, + + __NFSD_A_EXPKEY_MAX, + NFSD_A_EXPKEY_MAX = (__NFSD_A_EXPKEY_MAX - 1) +}; + +enum { + NFSD_A_EXPKEY_REQS_REQUESTS = 1, + + __NFSD_A_EXPKEY_REQS_MAX, + NFSD_A_EXPKEY_REQS_MAX = (__NFSD_A_EXPKEY_REQS_MAX - 1) +}; + enum { NFSD_CMD_RPC_STATUS_GET = 1, NFSD_CMD_THREADS_SET, @@ -189,6 +210,8 @@ enum { NFSD_CMD_CACHE_NOTIFY, NFSD_CMD_SVC_EXPORT_GET_REQS, NFSD_CMD_SVC_EXPORT_SET_REQS, + NFSD_CMD_EXPKEY_GET_REQS, + NFSD_CMD_EXPKEY_SET_REQS, __NFSD_CMD_MAX, NFSD_CMD_MAX = (__NFSD_CMD_MAX - 1) -- cgit v1.2.3 From 565ee23ea2374a0ec42bb70227447baa81fcd196 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 25 Mar 2026 10:40:33 -0400 Subject: sunrpc: add SUNRPC_CMD_CACHE_FLUSH netlink command Add a new SUNRPC_CMD_CACHE_FLUSH generic netlink command that allows userspace to flush the sunrpc auth caches (ip_map and unix_gid) without writing to /proc/net/rpc/*/flush. An optional SUNRPC_A_CACHE_FLUSH_MASK u32 attribute selects which caches to flush (bit 1 = ip_map, bit 2 = unix_gid). If the attribute is omitted, all sunrpc caches are flushed. This is used by exportfs to replace its /proc-based cache_flush() with a netlink equivalent, with /proc fallback for older kernels. Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever --- include/uapi/linux/sunrpc_netlink.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sunrpc_netlink.h b/include/uapi/linux/sunrpc_netlink.h index d71c623e92ab..34677f0ec2f9 100644 --- a/include/uapi/linux/sunrpc_netlink.h +++ b/include/uapi/linux/sunrpc_netlink.h @@ -59,12 +59,20 @@ enum { SUNRPC_A_UNIX_GID_REQS_MAX = (__SUNRPC_A_UNIX_GID_REQS_MAX - 1) }; +enum { + SUNRPC_A_CACHE_FLUSH_MASK = 1, + + __SUNRPC_A_CACHE_FLUSH_MAX, + SUNRPC_A_CACHE_FLUSH_MAX = (__SUNRPC_A_CACHE_FLUSH_MAX - 1) +}; + enum { SUNRPC_CMD_CACHE_NOTIFY = 1, SUNRPC_CMD_IP_MAP_GET_REQS, SUNRPC_CMD_IP_MAP_SET_REQS, SUNRPC_CMD_UNIX_GID_GET_REQS, SUNRPC_CMD_UNIX_GID_SET_REQS, + SUNRPC_CMD_CACHE_FLUSH, __SUNRPC_CMD_MAX, SUNRPC_CMD_MAX = (__SUNRPC_CMD_MAX - 1) -- cgit v1.2.3 From 70b7e3526c53d9dd7caccdbeff5b0485640d8cf1 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 25 Mar 2026 10:40:34 -0400 Subject: nfsd: add NFSD_CMD_CACHE_FLUSH netlink command Add a new NFSD_CMD_CACHE_FLUSH generic netlink command that allows userspace to flush the nfsd export caches (svc_export and expkey) without writing to /proc/net/rpc/*/flush. An optional NFSD_A_CACHE_FLUSH_MASK u32 attribute selects which caches to flush (bit 1 = svc_export, bit 2 = expkey). If the attribute is omitted, all nfsd caches are flushed. This is used by exportfs to replace its /proc-based cache_flush() with a netlink equivalent, with /proc fallback for older kernels. Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever --- include/uapi/linux/nfsd_netlink.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfsd_netlink.h b/include/uapi/linux/nfsd_netlink.h index fed7533c1533..060c43675599 100644 --- a/include/uapi/linux/nfsd_netlink.h +++ b/include/uapi/linux/nfsd_netlink.h @@ -197,6 +197,13 @@ enum { NFSD_A_EXPKEY_REQS_MAX = (__NFSD_A_EXPKEY_REQS_MAX - 1) }; +enum { + NFSD_A_CACHE_FLUSH_MASK = 1, + + __NFSD_A_CACHE_FLUSH_MAX, + NFSD_A_CACHE_FLUSH_MAX = (__NFSD_A_CACHE_FLUSH_MAX - 1) +}; + enum { NFSD_CMD_RPC_STATUS_GET = 1, NFSD_CMD_THREADS_SET, @@ -212,6 +219,7 @@ enum { NFSD_CMD_SVC_EXPORT_SET_REQS, NFSD_CMD_EXPKEY_GET_REQS, NFSD_CMD_EXPKEY_SET_REQS, + NFSD_CMD_CACHE_FLUSH, __NFSD_CMD_MAX, NFSD_CMD_MAX = (__NFSD_CMD_MAX - 1) -- cgit v1.2.3 From 37340ac2c7be914ff76fdc6bb505b204a4140268 Mon Sep 17 00:00:00 2001 From: Vicki Pfau Date: Thu, 21 May 2026 18:50:39 -0700 Subject: Input: userio - update maintainer name She's been committing under the name Lyude Paul for a while Signed-off-by: Vicki Pfau Link: https://patch.msgid.link/20260522015040.3953472-1-vi@endrift.com Signed-off-by: Dmitry Torokhov --- include/uapi/linux/userio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/userio.h b/include/uapi/linux/userio.h index 74c9951d2cd0..98fe7e9089c4 100644 --- a/include/uapi/linux/userio.h +++ b/include/uapi/linux/userio.h @@ -2,7 +2,7 @@ /* * userio: virtual serio device support * Copyright (C) 2015 Red Hat - * Copyright (C) 2015 Lyude (Stephen Chandler Paul) + * Copyright (C) 2015 Lyude Paul * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU Lesser General Public License as published by the -- cgit v1.2.3 From c6f1363abbff69e5bd1cd1fcf060e1510e8d6d31 Mon Sep 17 00:00:00 2001 From: Vicki Pfau Date: Thu, 21 May 2026 18:50:40 -0700 Subject: Input: userio - allow setting other id values Previously, only the type value was settable. The proto value is used internally for choosing the right drivers, so we should expose it. The other values make sense to expose as well. Signed-off-by: Vicki Pfau Link: https://patch.msgid.link/20260522015040.3953472-2-vi@endrift.com Signed-off-by: Dmitry Torokhov --- include/uapi/linux/userio.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/userio.h b/include/uapi/linux/userio.h index 98fe7e9089c4..550c7465af1f 100644 --- a/include/uapi/linux/userio.h +++ b/include/uapi/linux/userio.h @@ -27,7 +27,10 @@ enum userio_cmd_type { USERIO_CMD_REGISTER = 0, USERIO_CMD_SET_PORT_TYPE = 1, - USERIO_CMD_SEND_INTERRUPT = 2 + USERIO_CMD_SEND_INTERRUPT = 2, + USERIO_CMD_SET_PORT_EXTRA = 3, + USERIO_CMD_SET_PORT_ID = 4, + USERIO_CMD_SET_PORT_PROTO = 5, }; /* -- cgit v1.2.3 From 2cb5251d3d64d57c172185b9b608f704b3015f26 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 2 Jun 2026 11:09:38 +0200 Subject: futex: Provide UABI defines for robust list entry modifiers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The marker for PI futexes in the robust list is a hardcoded 0x1 which lacks any sensible form of documentation. Provide proper defines for the bit and the mask and fix up the usage sites. Thereby convert the boolean pi argument into a modifier argument, which allows new modifier bits to be trivially added and conveyed. Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Mathieu Desnoyers Reviewed-by: André Almeida Link: https://patch.msgid.link/20260602090535.458758556@kernel.org --- include/uapi/linux/futex.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h index 7e2744ec8933..29bf2f65406a 100644 --- a/include/uapi/linux/futex.h +++ b/include/uapi/linux/futex.h @@ -177,6 +177,10 @@ struct robust_list_head { */ #define ROBUST_LIST_LIMIT 2048 +/* Modifiers for robust_list_head::list_op_pending */ +#define FUTEX_ROBUST_MOD_PI (0x1UL) +#define FUTEX_ROBUST_MOD_MASK (FUTEX_ROBUST_MOD_PI) + /* * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a * match of any bit. -- cgit v1.2.3 From 1fd053d26f0333485cdbaa9d6e7b8cb53f54de95 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 2 Jun 2026 11:09:51 +0200 Subject: futex: Cleanup UAPI defines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make the operand defines tabular for readability sake. Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: André Almeida Link: https://patch.msgid.link/20260602090535.615600933@kernel.org --- include/uapi/linux/futex.h | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h index 29bf2f65406a..75df1eaff75d 100644 --- a/include/uapi/linux/futex.h +++ b/include/uapi/linux/futex.h @@ -25,23 +25,22 @@ #define FUTEX_PRIVATE_FLAG 128 #define FUTEX_CLOCK_REALTIME 256 -#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME) - -#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG) -#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG) -#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG) -#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_LOCK_PI2_PRIVATE (FUTEX_LOCK_PI2 | FUTEX_PRIVATE_FLAG) -#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG) + +#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME) + +#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG) +#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG) +#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG) +#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG) +#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG) +#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG) +#define FUTEX_LOCK_PI2_PRIVATE (FUTEX_LOCK_PI2 | FUTEX_PRIVATE_FLAG) +#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG) +#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG) #define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG) #define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \ - FUTEX_PRIVATE_FLAG) -#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \ - FUTEX_PRIVATE_FLAG) +#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | FUTEX_PRIVATE_FLAG) +#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | FUTEX_PRIVATE_FLAG) /* * Flags for futex2 syscalls. -- cgit v1.2.3 From 3ca9595d9fb6cce6633a5b03d98c2aecb5499838 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 2 Jun 2026 11:09:55 +0200 Subject: futex: Add support for unlocking robust futexes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Unlocking robust non-PI futexes happens in user space with the following sequence: 1) robust_list_set_op_pending(mutex); 2) robust_list_remove(mutex); lval = 0; 3) lval = atomic_xchg(lock, lval); 4) if (lval & WAITERS) 5) sys_futex(WAKE,....); 6) robust_list_clear_op_pending(); That opens a window between #3 and #6 where the mutex could be acquired by some other task which observes that it is the last user and: A) unmaps the mutex memory B) maps a different file, which ends up covering the same address When the original task exits before reaching #6 then the kernel robust list handling observes the pending op entry and tries to fix up user space. In case that the newly mapped data contains the TID of the exiting thread at the address of the mutex/futex the kernel will set the owner died bit in that memory and therefore corrupting unrelated data. PI futexes have a similar problem both for the non-contented user space unlock and the in kernel unlock: 1) robust_list_set_op_pending(mutex); 2) robust_list_remove(mutex); lval = gettid(); 3) if (!atomic_try_cmpxchg(lock, lval, 0)) 4) sys_futex(UNLOCK_PI,....); 5) robust_list_clear_op_pending(); Address the first part of the problem where the futexes have waiters and need to enter the kernel anyway. Add a new FUTEX_ROBUST_UNLOCK flag, which is valid for the sys_futex() FUTEX_UNLOCK_PI, FUTEX_WAKE, FUTEX_WAKE_BITSET operations. This deliberately omits FUTEX_WAKE_OP from this treatment as it's unclear whether this is needed and there is no usage of it in glibc either to investigate. For the futex2 syscall family this needs to be implemented with a new syscall. The sys_futex() case [ab]uses the @uaddr2 argument to hand the pointer to robust_list_head::list_pending_op into the kernel. This argument is only evaluated when the FUTEX_ROBUST_UNLOCK bit is set and is therefore backward compatible. This is an explicit argument to avoid the lookup of the robust list pointer and retrieving the pending op pointer from there. User space has the pointer already available so it can just put it into the @uaddr2 argument. Aside of that this allows the usage of multiple robust lists in the future without any changes to the internal functions as they just operate on the provided pointer. This requires a second flag FUTEX_ROBUST_LIST32 which indicates that the robust list pointer points to an u32 and not to an u64. This is required for two reasons: 1) sys_futex() has no compat variant 2) The gaming emulators use both both 64-bit and compat 32-bit robust lists in the same 64-bit application As a consequence 32-bit applications have to set this flag unconditionally so they can run on a 64-bit kernel in compat mode unmodified. 32-bit kernels return an error code when the flag is not set. 64-bit kernels will happily clear the full 64 bits if user space fails to set it. In case of FUTEX_UNLOCK_PI this clears the robust list pending op when the unlock succeeded. In case of errors, the user space value is still locked by the caller and therefore the above cannot happen. In case of FUTEX_WAKE* this does the unlock of the futex in the kernel and clears the robust list pending op when the unlock was successful. If not, the user space value is still locked and user space has to deal with the returned error. That means that the unlocking of non-PI robust futexes has to use the same try_cmpxchg() unlock scheme as PI futexes. If the clearing of the pending list op fails (fault) then the kernel clears the registered robust list pointer if it matches to prevent that exit() will try to handle invalid data. That's a valid paranoid decision because the robust list head sits usually in the TLS and if the TLS is not longer accessible then the chance for fixing up the resulting mess is very close to zero. The problem of non-contended unlocks still exists and will be addressed separately. Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: André Almeida Link: https://patch.msgid.link/20260602090535.670514505@kernel.org --- include/uapi/linux/futex.h | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h index 75df1eaff75d..10a36c551675 100644 --- a/include/uapi/linux/futex.h +++ b/include/uapi/linux/futex.h @@ -25,8 +25,11 @@ #define FUTEX_PRIVATE_FLAG 128 #define FUTEX_CLOCK_REALTIME 256 +#define FUTEX_ROBUST_UNLOCK 512 +#define FUTEX_ROBUST_LIST32 1024 -#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME) +#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME | \ + FUTEX_ROBUST_UNLOCK | FUTEX_ROBUST_LIST32) #define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG) #define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG) @@ -42,6 +45,30 @@ #define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | FUTEX_PRIVATE_FLAG) #define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | FUTEX_PRIVATE_FLAG) +/* + * Operations to unlock a futex, clear the robust list pending op pointer and + * wake waiters. + */ +#define FUTEX_UNLOCK_PI_LIST64 (FUTEX_UNLOCK_PI | FUTEX_ROBUST_UNLOCK) +#define FUTEX_UNLOCK_PI_LIST64_PRIVATE (FUTEX_UNLOCK_PI_LIST64 | FUTEX_PRIVATE_FLAG) +#define FUTEX_UNLOCK_PI_LIST32 (FUTEX_UNLOCK_PI | FUTEX_ROBUST_UNLOCK | \ + FUTEX_ROBUST_LIST32) +#define FUTEX_UNLOCK_PI_LIST32_PRIVATE (FUTEX_UNLOCK_PI_LIST32 | FUTEX_PRIVATE_FLAG) + +#define FUTEX_UNLOCK_WAKE_LIST64 (FUTEX_WAKE | FUTEX_ROBUST_UNLOCK) +#define FUTEX_UNLOCK_WAKE_LIST64_PRIVATE (FUTEX_UNLOCK_WAKE_LIST64 | FUTEX_PRIVATE_FLAG) + +#define FUTEX_UNLOCK_WAKE_LIST32 (FUTEX_WAKE | FUTEX_ROBUST_UNLOCK | \ + FUTEX_ROBUST_LIST32) +#define FUTEX_UNLOCK_WAKE_LIST32_PRIVATE (FUTEX_UNLOCK_WAKE_LIST32 | FUTEX_PRIVATE_FLAG) + +#define FUTEX_UNLOCK_BITSET_LIST64 (FUTEX_WAKE_BITSET | FUTEX_ROBUST_UNLOCK) +#define FUTEX_UNLOCK_BITSET_LIST64_PRIVATE (FUTEX_UNLOCK_BITSET_LIST64 | FUTEX_PRIVATE_FLAG) + +#define FUTEX_UNLOCK_BITSET_LIST32 (FUTEX_WAKE_BITSET | FUTEX_ROBUST_UNLOCK | \ + FUTEX_ROBUST_LIST32) +#define FUTEX_UNLOCK_BITSET_LIST32_PRIVATE (FUTEX_UNLOCK_BITSET_LIST32 | FUTEX_PRIVATE_FLAG) + /* * Flags for futex2 syscalls. * -- cgit v1.2.3 From afabbb56a7262979a75259e2710019aa8ced3e8a Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Tue, 2 Jun 2026 19:03:45 +0000 Subject: geneve: Introduce IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6. By default, a GENEVE device bind()s its underlying UDP socket(s) to the IPv4 or IPv6 wildcard address because there is no way to specify a specific local IP address to bind() to. This prevents deploying multiple GENEVE devices on a multi-homed host where each device should be isolated and bound to a different local IP address on the same UDP port. Let's introduce new options, IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6, to allow specifying a local IPv4/IPv6 address for the backend UDP socket. By default, when collect metadata mode (IFLA_GENEVE_COLLECT_METADATA) is enabled, both IPv4 and IPv6 sockets are created. However, if a source address is specified via the new attributes, only a single socket corresponding to that specific address family is created. Accordingly, geneve_find_sock() and geneve_find_dev() are updated to take the source address into account, ensuring that multiple devices and sockets configured with different source addresses can coexist without conflict. In addition, the source address is validated in geneve_xmit_skb() and geneve6_xmit_skb(), so the BPF prog must set it in bpf_tunnel_key. With this change, multiple GENEVE devices can be successfully created and bound to their respective local IP addresses: (*) "local" is the keyword for IFLA_GENEVE_LOCAL / IFLA_GENEVE_LOCAL6 # for i in $(seq 1 2); do ip link add geneve4_${i} type geneve local 192.168.0.${i} external ip addr add 192.168.0.${i}/24 dev geneve4_${i} ip link set geneve4_${i} up ip link add geneve6_${i} type geneve local 2001:9292::${i} external ip addr add 2001:9292::${i}/64 dev geneve6_${i} nodad ip link set geneve6_${i} up done # ip -d l | grep geneve 9: geneve4_1: ... geneve external id 0 local 192.168.0.1 ... 10: geneve6_1: ... geneve external id 0 local 2001:9292::1 ... 11: geneve4_2: ... geneve external id 0 local 192.168.0.2 ... 12: geneve6_2: ... geneve external id 0 local 2001:9292::2 ... # ss -ua | grep geneve UNCONN 0 0 192.168.0.2:geneve 0.0.0.0:* UNCONN 0 0 192.168.0.1:geneve 0.0.0.0:* UNCONN 0 0 [2001:9292::2]:geneve *:* UNCONN 0 0 [2001:9292::1]:geneve *:* Note that even if the local address is explicitly configured with the wildcard address, kernel does not dump it except for devices with IFLA_GENEVE_COLLECT_METADATA. This is consistent with the behaviour of is_tnl_info_zero(), which treats the wildcard remote address as not configured. ## ynl example. # ./tools/net/ynl/pyynl/cli.py \ --spec ./Documentation/netlink/specs/rt-link.yaml \ --do newlink --create \ --json '{"ifname": "geneve0", "linkinfo": {"kind":"geneve", "data": {"local": "0.0.0.0", "collect-metadata": true}}}' # ./tools/net/ynl/pyynl/cli.py \ --spec ./Documentation/netlink/specs/rt-link.yaml \ --do getlink \ --json '{"ifname": "geneve0"}' --output-json | \ jq .linkinfo.data.local "0.0.0.0" Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260602190436.139591-6-kuniyu@google.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/if_link.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 46413392b402..363526549a01 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -1506,6 +1506,8 @@ enum { IFLA_GENEVE_INNER_PROTO_INHERIT, IFLA_GENEVE_PORT_RANGE, IFLA_GENEVE_GRO_HINT, + IFLA_GENEVE_LOCAL, + IFLA_GENEVE_LOCAL6, __IFLA_GENEVE_MAX }; #define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) -- cgit v1.2.3 From a9d155ea9b44d9b979796506bec518222f10b9e6 Mon Sep 17 00:00:00 2001 From: Antony Antony Date: Tue, 26 May 2026 21:09:51 +0200 Subject: xfrm: add XFRM_MSG_MIGRATE_STATE for single SA migration Add a new netlink method to migrate a single xfrm_state. Unlike the existing migration mechanism (SA + policy), this supports migrating only the SA and allows changing the reqid. The SA is looked up via xfrm_usersa_id, which uniquely identifies it, so old_saddr is not needed. old_daddr is carried in xfrm_usersa_id.daddr. The reqid is invariant in the old migration. Signed-off-by: Antony Antony Signed-off-by: Steffen Klassert --- include/uapi/linux/xfrm.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index a23495c0e0a1..051f8066efd1 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -227,6 +227,9 @@ enum { #define XFRM_MSG_SETDEFAULT XFRM_MSG_SETDEFAULT XFRM_MSG_GETDEFAULT, #define XFRM_MSG_GETDEFAULT XFRM_MSG_GETDEFAULT + + XFRM_MSG_MIGRATE_STATE, +#define XFRM_MSG_MIGRATE_STATE XFRM_MSG_MIGRATE_STATE __XFRM_MSG_MAX }; #define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1) @@ -507,6 +510,28 @@ struct xfrm_user_migrate { __u16 new_family; }; +struct xfrm_user_migrate_state { + struct xfrm_usersa_id id; + xfrm_address_t new_daddr; + xfrm_address_t new_saddr; + struct xfrm_mark old_mark; + struct xfrm_selector new_sel; + __u32 new_reqid; + __u32 flags; + __u16 new_family; + __u16 reserved; +}; + +/* Flags for xfrm_user_migrate_state.flags */ +enum xfrm_migrate_state_flags { + XFRM_MIGRATE_STATE_CLEAR_OFFLOAD = 1, /* do not inherit offload from existing SA */ + XFRM_MIGRATE_STATE_UPDATE_H2H_SEL = 2, /* update H2H selector from new daddr/saddr */ +}; + +/* All flags defined as of this header version; unknown bits are rejected. */ +#define XFRM_MIGRATE_STATE_KNOWN_FLAGS \ + (XFRM_MIGRATE_STATE_CLEAR_OFFLOAD | XFRM_MIGRATE_STATE_UPDATE_H2H_SEL) + struct xfrm_user_mapping { struct xfrm_usersa_id id; __u32 reqid; -- cgit v1.2.3 From f3ff3eb0d6a4080fa7f554b8478a3405b8e4befe Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 4 Jun 2026 21:58:31 +0200 Subject: batman-adv: uapi: keep kernel-doc in struct member order The order of the members of struct batadv_coded_packet and struct batadv_unicast_tvlv_packet didn't match the kernel doc. This is the case for all other structures and should also be done the same way for these two. Signed-off-by: Sven Eckelmann --- include/uapi/linux/batadv_packet.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h index 439132a819ea..1241285b866c 100644 --- a/include/uapi/linux/batadv_packet.h +++ b/include/uapi/linux/batadv_packet.h @@ -518,16 +518,16 @@ struct batadv_mcast_packet { * @packet_type: batman-adv packet type, part of the general header * @version: batman-adv protocol version, part of the general header * @ttl: time to live for this packet, part of the general header + * @first_ttvn: tt-version number of first included packet * @first_source: original source of first included packet * @first_orig_dest: original destination of first included packet * @first_crc: checksum of first included packet - * @first_ttvn: tt-version number of first included packet * @second_ttl: ttl of second packet + * @second_ttvn: tt version number of second included packet * @second_dest: second receiver of this coded packet * @second_source: original source of second included packet * @second_orig_dest: original destination of second included packet * @second_crc: checksum of second included packet - * @second_ttvn: tt version number of second included packet * @coded_len: length of network coded part of the payload */ struct batadv_coded_packet { @@ -554,8 +554,8 @@ struct batadv_coded_packet { * @version: batman-adv protocol version, part of the general header * @ttl: time to live for this packet, part of the general header * @reserved: reserved field (for packet alignment) - * @src: address of the source * @dst: address of the destination + * @src: address of the source * @tvlv_len: length of tvlv data following the unicast tvlv header * @align: 2 bytes to align the header to a 4 byte boundary */ -- cgit v1.2.3 From 16b4d3e2fb24aac3e68a8d86e3bc5e302e1b5cb7 Mon Sep 17 00:00:00 2001 From: Mykyta Yatsenko Date: Fri, 5 Jun 2026 04:41:21 -0700 Subject: bpf: Implement resizable hashmap basic functions Use rhashtable_lookup_likely() for lookups, rhashtable_remove_fast() for deletes, and rhashtable_lookup_get_insert_fast() for inserts. Updates modify values in place under RCU rather than allocating a new element and swapping the pointer (as regular htab does). This trades read consistency for performance: concurrent readers may see partial updates. BPF_F_LOCK support and special-field handling (timers, kptrs, etc.) follow in a later commit. Initialize rhashtable with bpf_mem_alloc element cache. Require BPF_F_NO_PREALLOC. Limit max_entries to 2^31. Free elements via rhashtable_free_and_destroy(). Signed-off-by: Mykyta Yatsenko Link: https://lore.kernel.org/r/20260605-rhash-v7-4-5b8e05f8630d@meta.com Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index aec171ccb6ef..bed9b1b4d5ef 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1047,6 +1047,7 @@ enum bpf_map_type { BPF_MAP_TYPE_CGRP_STORAGE, BPF_MAP_TYPE_ARENA, BPF_MAP_TYPE_INSN_ARRAY, + BPF_MAP_TYPE_RHASH, __MAX_BPF_MAP_TYPE }; @@ -1545,6 +1546,11 @@ union bpf_attr { * * BPF_MAP_TYPE_ARENA - contains the address where user space * is going to mmap() the arena. It has to be page aligned. + * + * BPF_MAP_TYPE_RHASH - initial table size hint + * (nelem_hint). 0 = use rhashtable default. Must be + * <= min(max_entries, U16_MAX). Upper 32 bits reserved, + * must be zero. */ __u64 map_extra; -- cgit v1.2.3 From 682ecb14e83840e87ea36c6d7c16c5111ce18784 Mon Sep 17 00:00:00 2001 From: Ankit Agrawal Date: Tue, 2 Jun 2026 06:30:15 +0000 Subject: vfio/nvgrace-gpu: Add Blackwell-Next GPU readiness check via CXL DVSEC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a CXL DVSEC-based readiness check for Blackwell-Next GPUs alongside the existing legacy BAR0 polling path. The CXL Device DVSEC offset is discovered at probe time. Probe, fault and read/write paths then branch on that to use either the legacy BAR0 polling or the CXL DVSEC polling. The CXL path polls Memory_Active, requiring MEM_INFO_VALID within 1s and MEM_ACTIVE within Memory_Active_Timeout (up to 256s) as per CXL spec r4.0 sec 8.1.3.8.2. Given the long worst-case wait, the CXL poll runs outside memory_lock with only a quick readiness check is done under the lock. The poll loops sleep with schedule_timeout_killable() and return -EINTR on a fatal signal. This avoids hung-task panics during the long uninterruptible wait. Extend this to the legacy based wait as well for improvement. In the fault handler the wait runs locklessly before memory_lock. If a reset races in, the in-lock recheck returns -EAGAIN and the wait is retried rather than returning a spurious VM_FAULT_SIGBUS. Add PCI_DVSEC_CXL_MEM_ACTIVE_TIMEOUT to pci_regs.h for the timeout field. Cc: Ilpo Järvinen Cc: Kevin Tian Suggested-by: Alex Williamson Signed-off-by: Ankit Agrawal Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20260602063015.3915-1-ankita@nvidia.com Signed-off-by: Alex Williamson --- include/uapi/linux/pci_regs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 14f634ab9350..718fb630f5bb 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -1357,6 +1357,7 @@ #define PCI_DVSEC_CXL_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10)) #define PCI_DVSEC_CXL_MEM_INFO_VALID _BITUL(0) #define PCI_DVSEC_CXL_MEM_ACTIVE _BITUL(1) +#define PCI_DVSEC_CXL_MEM_ACTIVE_TIMEOUT __GENMASK(15, 13) #define PCI_DVSEC_CXL_MEM_SIZE_LOW __GENMASK(31, 28) #define PCI_DVSEC_CXL_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10)) #define PCI_DVSEC_CXL_RANGE_BASE_LOW(i) (0x24 + (i * 0x10)) -- cgit v1.2.3 From e2a49fdb1beed150125b4104c90eb2a96ec7f63a Mon Sep 17 00:00:00 2001 From: Leon Hwang Date: Fri, 5 Jun 2026 23:52:47 +0800 Subject: bpf: Check tail zero of bpf_map_info Since there're 4 bytes padding at the end of struct bpf_map_info, they won't be checked by bpf_check_uarg_tail_zero(). pahole -C bpf_map_info ./vmlinux struct bpf_map_info { ... __u64 hash __attribute__((__aligned__(8))); /* 88 8 */ __u32 hash_size; /* 96 4 */ /* size: 104, cachelines: 2, members: 18 */ /* padding: 4 */ /* forced alignments: 1 */ /* last cacheline: 40 bytes */ } __attribute__((__aligned__(8))); If a future kernel extension adds a new 4-byte field, older userspace programs allocating this structure on the stack might inadvertently pass uninitialized stack garbage into the new field, permanently breaking backward compatibility. -- sashiko [1] Fix it by changing sizeof(info) to offsetofend(struct bpf_map_info, hash_size). And, add "__u32 :32" to the tail of struct bpf_map_info. [1] https://lore.kernel.org/bpf/20260513224823.6494FC19425@smtp.kernel.org/ Fixes: ea2e6467ac36 ("bpf: Return hashes of maps in BPF_OBJ_GET_INFO_BY_FD") Acked-by: Mykyta Yatsenko Signed-off-by: Leon Hwang Link: https://lore.kernel.org/r/20260605155249.20772-2-leon.hwang@linux.dev Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index bed9b1b4d5ef..e1730f449d9e 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -6733,6 +6733,7 @@ struct bpf_map_info { __u64 map_extra; __aligned_u64 hash; __u32 hash_size; + __u32 :32; } __attribute__((aligned(8))); struct bpf_btf_info { -- cgit v1.2.3 From 786be2b05980a5828e67fc564ad7517e2adbe9bd Mon Sep 17 00:00:00 2001 From: Leon Hwang Date: Fri, 5 Jun 2026 23:52:48 +0800 Subject: bpf: Check tail zero of bpf_prog_info Since there're 4 bytes padding at the end of struct bpf_prog_info, they won't be checked by bpf_check_uarg_tail_zero(). pahole -C bpf_prog_info ./vmlinux struct bpf_prog_info { ... __u32 attach_btf_obj_id; /* 220 4 */ __u32 attach_btf_id; /* 224 4 */ /* size: 232, cachelines: 4, members: 38 */ /* sum members: 224 */ /* sum bitfield members: 1 bits, bit holes: 1, sum bit holes: 31 bits */ /* padding: 4 */ /* forced alignments: 9 */ /* last cacheline: 40 bytes */ } __attribute__((__aligned__(8))); If a future kernel extension adds a new 4-byte field, older userspace programs allocating this structure on the stack might inadvertently pass uninitialized stack garbage into the new field, permanently breaking backward compatibility. -- sashiko [1] Fix it by changing sizeof(info) to offsetofend(struct bpf_prog_info, attach_btf_id). And, add "__u32 :32" to the tail of struct bpf_prog_info. [1] https://lore.kernel.org/bpf/20260513224823.6494FC19425@smtp.kernel.org/ Fixes: aba64c7da983 ("bpf: Add verified_insns to bpf_prog_info and fdinfo") Acked-by: Mykyta Yatsenko Signed-off-by: Leon Hwang Link: https://lore.kernel.org/r/20260605155249.20772-3-leon.hwang@linux.dev Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index e1730f449d9e..d5238df5e5eb 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -6712,6 +6712,7 @@ struct bpf_prog_info { __u32 verified_insns; __u32 attach_btf_obj_id; __u32 attach_btf_id; + __u32 :32; } __attribute__((aligned(8))); struct bpf_map_info { -- cgit v1.2.3 From d14e6b4346bf397eca7cb5f4b7b0b8054be632d8 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Sat, 6 Jun 2026 14:39:35 +0200 Subject: bpf: Add multi tracing attach types Adding new program attach types multi tracing attachment: BPF_TRACE_FENTRY_MULTI BPF_TRACE_FEXIT_MULTI and their base support in verifier code. Programs with such attach type will use specific link attachment interface coming in following changes. This was suggested by Andrii some (long) time ago and turned out to be easier than having special program flag for that. Bpf programs with such types have 'bpf_multi_func' function set as their attach_btf_id and keep module reference when it's specified by attach_prog_fd. They are also accepted as sleepable programs during verification, and the real validation for specific BTF_IDs/functions will happen during the multi link attachment in following changes. Suggested-by: Andrii Nakryiko Signed-off-by: Jiri Olsa Link: https://lore.kernel.org/r/20260606123955.345967-11-jolsa@kernel.org Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index d5238df5e5eb..28d127e5040a 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1156,6 +1156,8 @@ enum bpf_attach_type { BPF_TRACE_KPROBE_SESSION, BPF_TRACE_UPROBE_SESSION, BPF_TRACE_FSESSION, + BPF_TRACE_FENTRY_MULTI, + BPF_TRACE_FEXIT_MULTI, __MAX_BPF_ATTACH_TYPE }; -- cgit v1.2.3 From c1d32dea5d4694c1a6c14d1d1c3192d0e18ffc7b Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Sat, 6 Jun 2026 14:39:38 +0200 Subject: bpf: Add support for tracing multi link Adding new link to allow to attach program to multiple function BTF IDs. The link is represented by struct bpf_tracing_multi_link. To configure the link, new fields are added to bpf_attr::link_create to pass array of BTF IDs; struct { __aligned_u64 ids; __u32 cnt; } tracing_multi; Each BTF ID represents function (BTF_KIND_FUNC) that the link will attach bpf program to. We use previously added bpf_trampoline_multi_attach/detach functions to attach/detach the link. The linkinfo/fdinfo callbacks will be implemented in following changes. Note this is supported only for archs (x86_64) with ftrace direct and have single ops support. CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS && CONFIG_HAVE_SINGLE_FTRACE_DIRECT_OPS Note using sort_r (instead of plain sort) in check_dup_ids, because we will use the swap callback in following changes. Signed-off-by: Jiri Olsa Link: https://lore.kernel.org/r/20260606123955.345967-14-jolsa@kernel.org Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 28d127e5040a..9f603731d267 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1182,6 +1182,7 @@ enum bpf_link_type { BPF_LINK_TYPE_UPROBE_MULTI = 12, BPF_LINK_TYPE_NETKIT = 13, BPF_LINK_TYPE_SOCKMAP = 14, + BPF_LINK_TYPE_TRACING_MULTI = 15, __MAX_BPF_LINK_TYPE, }; @@ -1877,6 +1878,10 @@ union bpf_attr { }; __u64 expected_revision; } cgroup; + struct { + __aligned_u64 ids; + __u32 cnt; + } tracing_multi; }; } link_create; -- cgit v1.2.3 From 46b42af27d40021a97c147d23de8cb29eb5020df Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Sat, 6 Jun 2026 14:39:39 +0200 Subject: bpf: Add support for tracing_multi link cookies Add support to specify cookies for tracing_multi link. Cookies are provided in array where each value is paired with provided BTF ID value with the same array index. Such cookie can be retrieved by bpf program with bpf_get_attach_cookie helper call. We need to sort cookies array together with ids array in check_dup_ids, to keep the id->cookie relation. Signed-off-by: Jiri Olsa Link: https://lore.kernel.org/r/20260606123955.345967-15-jolsa@kernel.org Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 9f603731d267..569c15e1cae3 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1880,6 +1880,7 @@ union bpf_attr { } cgroup; struct { __aligned_u64 ids; + __aligned_u64 cookies; __u32 cnt; } tracing_multi; }; -- cgit v1.2.3 From ba042ed6446fc524c1d804227765b45616f9cba3 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Sat, 6 Jun 2026 14:39:40 +0200 Subject: bpf: Add support for tracing_multi link session Adding support to use session attachment with tracing_multi link. Adding new BPF_TRACE_FSESSION_MULTI program attach type, that follows the BPF_TRACE_FSESSION behaviour but on the tracing_multi link. Such program is called on entry and exit of the attached function and allows to pass cookie value from entry to exit execution. Signed-off-by: Jiri Olsa Link: https://lore.kernel.org/r/20260606123955.345967-16-jolsa@kernel.org Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 569c15e1cae3..11dd610fa5fa 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1158,6 +1158,7 @@ enum bpf_attach_type { BPF_TRACE_FSESSION, BPF_TRACE_FENTRY_MULTI, BPF_TRACE_FEXIT_MULTI, + BPF_TRACE_FSESSION_MULTI, __MAX_BPF_ATTACH_TYPE }; -- cgit v1.2.3 From c6153ed23ed6a2bb8a5891382c06134674610f86 Mon Sep 17 00:00:00 2001 From: Mark Harmstone Date: Thu, 16 Apr 2026 19:01:18 +0100 Subject: btrfs: add ioctl GET_CSUMS to read raw checksums from file range Add a new unprivileged BTRFS_IOC_GET_CSUMS ioctl, which can be used to query the on-disk csums for a file range. The ioctl is deliberately per-file rather than exposing raw csum tree lookups, to avoid leaking information to users about files they may not have access to. This is done by userspace passing a struct btrfs_ioctl_get_csums_args to the kernel, which details the offset and length we're interested in, and a buffer for the kernel to write its results into. The kernel writes a struct btrfs_ioctl_get_csums_entry into the buffer, followed by the csums if available. The maximum size of the user buffer is capped to 16MiB. If the extent is an uncompressed, non-NODATASUM extent, the kernel sets the entry type to BTRFS_GET_CSUMS_HAS_CSUMS and follows it with the csums. If it is sparse, preallocated, or beyond the EOF, it sets the type to BTRFS_GET_CSUMS_ZEROED - this is so userspace knows it can use the precomputed hash of the zero sector. Otherwise, it sets the type to BTRFS_GET_CSUMS_NODATASUM, BTRFS_GET_CSUMS_COMPRESSED, BTRFS_GET_CSUM_ENCRYPTED, or BTRFS_GET_CSUM_INLINE. For example, a file with a [0, 4K) hole and [4K, 12K) data extent would produce the following output buffer: | [0, 4K) ZEROED | [4K, 12K) HAS_CSUMS | csum data | We do store the csums of compressed extents, but we deliberately don't return them here: they're calculated over the compressed data, not the uncompressed data that's returned to userspace. Similarly for encrypted data, once encryption is supported, in which the csums will be on the ciphertext. The main use case for this is for speeding up mkfs.btrfs --rootdir. For the case when the source FS is btrfs and using the same csum algorithm, we can avoid having to recalculate the csums - in my synthetic benchmarks (16GB file on a spinning-rust drive), this resulted in a ~11% speed-up (218s to 196s). When using the --reflink option added in btrfs-progs v6.16.1, we can forgo reading the data entirely, resulting a ~2200% speed-up on the same test (128s to 6s). # mkdir rootdir # dd if=/dev/urandom of=rootdir/file bs=4096 count=4194304 (without ioctl) # echo 3 > /proc/sys/vm/drop_caches # time mkfs.btrfs --rootdir rootdir testimg ... real 3m37.965s user 0m5.496s sys 0m6.125s # echo 3 > /proc/sys/vm/drop_caches # time mkfs.btrfs --rootdir rootdir --reflink testimg ... real 2m8.342s user 0m5.472s sys 0m1.667s (with ioctl) # echo 3 > /proc/sys/vm/drop_caches # time mkfs.btrfs --rootdir rootdir testimg ... real 3m15.865s user 0m4.258s sys 0m6.261s # echo 3 > /proc/sys/vm/drop_caches # time mkfs.btrfs --rootdir rootdir --reflink testimg ... real 0m5.847s user 0m2.899s sys 0m0.097s Another notable use case is for deduplication, where reading the checksums may serve as a hint instead of reading the whole file data. Reviewed-by: Qu Wenruo Signed-off-by: Mark Harmstone Signed-off-by: David Sterba --- include/uapi/linux/btrfs.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/btrfs.h b/include/uapi/linux/btrfs.h index 9165154a274d..9b576603b3f1 100644 --- a/include/uapi/linux/btrfs.h +++ b/include/uapi/linux/btrfs.h @@ -1100,6 +1100,38 @@ enum btrfs_err_code { BTRFS_ERROR_DEV_RAID1C4_MIN_NOT_MET, }; +/* Flags for struct btrfs_ioctl_get_csums_entry::type. */ +#define BTRFS_GET_CSUMS_HAS_CSUMS (1U << 0) +#define BTRFS_GET_CSUMS_ZEROED (1U << 1) +#define BTRFS_GET_CSUMS_NODATASUM (1U << 2) +#define BTRFS_GET_CSUMS_COMPRESSED (1U << 3) +#define BTRFS_GET_CSUMS_ENCRYPTED (1U << 4) +#define BTRFS_GET_CSUMS_INLINE (1U << 5) + +struct btrfs_ioctl_get_csums_entry { + /* File offset of this range. */ + __u64 offset; + /* Length in bytes. */ + __u64 length; + /* One of BTRFS_GET_CSUMS_* types. */ + __u32 type; + /* Padding, must be 0. */ + __u32 reserved; +}; + +struct btrfs_ioctl_get_csums_args { + /* In/out: file offset in bytes. */ + __u64 offset; + /* In/out: range length in bytes. */ + __u64 length; + /* In/out: buffer capacity / bytes written. */ + __u64 buf_size; + /* In: flags, must be 0 for now. */ + __u64 flags; + /* Out: entries of type btrfs_ioctl_get_csums_entry + csum data */ + __u8 buf[]; +}; + /* Flags for IOC_SHUTDOWN, must match XFS_FSOP_GOING_FLAGS_* flags. */ #define BTRFS_SHUTDOWN_FLAGS_DEFAULT 0x0 #define BTRFS_SHUTDOWN_FLAGS_LOGFLUSH 0x1 @@ -1226,6 +1258,8 @@ enum btrfs_err_code { struct btrfs_ioctl_encoded_io_args) #define BTRFS_IOC_SUBVOL_SYNC_WAIT _IOW(BTRFS_IOCTL_MAGIC, 65, \ struct btrfs_ioctl_subvol_wait) +#define BTRFS_IOC_GET_CSUMS _IOWR(BTRFS_IOCTL_MAGIC, 66, \ + struct btrfs_ioctl_get_csums_args) /* Shutdown ioctl should follow XFS's interfaces, thus not using btrfs magic. */ #define BTRFS_IOC_SHUTDOWN _IOR('X', 125, __u32) -- cgit v1.2.3 From 38ecabc9af8be21fcb07f19634b56b6ec2d70268 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 29 May 2026 14:20:22 -0700 Subject: watchdog: uapi: add comments for what bit masks apply to Add comments similar to those in include/linux/watchdog.h so that the reader/user doesn't have to dig into the API documentation files for this. Signed-off-by: Randy Dunlap Signed-off-by: Guenter Roeck --- include/uapi/linux/watchdog.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/watchdog.h b/include/uapi/linux/watchdog.h index b15cde5c9054..fc73c17ee182 100644 --- a/include/uapi/linux/watchdog.h +++ b/include/uapi/linux/watchdog.h @@ -36,6 +36,7 @@ struct watchdog_info { #define WDIOF_UNKNOWN -1 /* Unknown flag error */ #define WDIOS_UNKNOWN -1 /* Unknown status error */ +/* Bit masks for watchdog_info.options, GETSTATUS and GETBOOTSTATUS ioctls */ #define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */ #define WDIOF_FANFAULT 0x0002 /* Fan failed */ #define WDIOF_EXTERN1 0x0004 /* External relay 1 */ @@ -50,6 +51,7 @@ struct watchdog_info { other external alarm not a reboot */ #define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */ +/* Bit masks for WDIOC_SETOPTIONS ioctl */ #define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */ #define WDIOS_ENABLECARD 0x0002 /* Turn on the watchdog timer */ #define WDIOS_TEMPPANIC 0x0004 /* Kernel panic on temperature trip */ -- cgit v1.2.3 From 69710a37bad62afc3d2f1fbf7b108e5f8b3808cd Mon Sep 17 00:00:00 2001 From: David 'equinox' Lamparter Date: Fri, 5 Jun 2026 18:41:44 +0200 Subject: if_ether.h: add 802.1AC, warn about GRE 0x00FE Because LLC wasn't complicated/annoying enough, there's 2 more "ethertypes" being used for it: - 0x8870 is pretty "normal", it got standardized in 802.1AC-2016/Cor1-2018 for transporting LLC frames > 1500 bytes. It simply replaces the length value (which is no longer encoded, and must now be derived from the packet.) The actual value dates back to 2001; https://datatracker.ietf.org/doc/html/draft-ietf-isis-ext-eth-01 (it was used without "proper" standardization for a long time) - 0x00fe is a doozy - actually "invalid" depending on how you look at it; it's used in GRE (and possibly GENEVE) tunnels to transport the IS-IS routing protocol. https://seclists.org/tcpdump/2002/q4/61 is the best/oldest source I could find. It's inspired by the 0xfe SAP value, a GRE packet with protocol 0x00fe is followed by a payload "as if" it was Ethernet with " 0xfe 0xfe 0x03". (Again the length isn't encoded explicitly anymore.) The 0x00fe value is quite close to other values the kernel is using internally for various things (after all they "won't clash for 1500 types"). Except this one does clash, and if someone unknowingly starts using it for something internal... we end up in a world of pain in getting IS-IS running on GRE tunnels. Hence the "WARNING". Signed-off-by: David 'equinox' Lamparter Cc: Andrew Lunn Link: https://patch.msgid.link/20260605164144.81184-1-equinox@diac24.net Signed-off-by: Jakub Kicinski --- include/uapi/linux/if_ether.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index fb5efc8e06cc..1ffac52c39df 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -82,6 +82,7 @@ #define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ #define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ #define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ +#define ETH_P_8021AC 0x8870 /* 802.1AC LLC > 1500 bytes */ #define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport * over Ethernet */ @@ -164,6 +165,10 @@ #define ETH_P_MCTP 0x00FA /* Management component transport * protocol packets */ +#define ETH_P_GRE_OSI 0x00FE /* GRE tunnels: LLC "fe fe 03" analog, + * used primarily for IS-IS over GRE + * WARNING: not internal, used on wire! + */ /* * This is an Ethernet frame header. -- cgit v1.2.3 From 103ff3a50e3a50a97e2b123d4dccbc8665eb1552 Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Tue, 9 Jun 2026 17:09:28 +0200 Subject: KVM: s390: Add capability to support 2G hugepages Add KVM_CAP_S390_HPAGE_2G to signal to userspace that 2G hugepages may be used to back the guest; restrictions apply similar to 1M hugepages. Enable the (for now still ignored) GMAP_FLAG_ALLOW_HPAGE_2G flag for the guest gmap, and propagate / disable it as necessary. Reviewed-by: Steffen Eiden Signed-off-by: Claudio Imbrenda Message-ID: <20260609150930.665370-3-imbrenda@linux.ibm.com> --- include/uapi/linux/kvm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 6c8afa2047bf..419011097fa8 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -996,6 +996,7 @@ struct kvm_enable_cap { #define KVM_CAP_S390_USER_OPEREXEC 246 #define KVM_CAP_S390_KEYOP 247 #define KVM_CAP_S390_VSIE_ESAMODE 248 +#define KVM_CAP_S390_HPAGE_2G 249 struct kvm_irq_routing_irqchip { __u32 irqchip; -- cgit v1.2.3 From 978cda83de411fcbff22ac5b2b0024cae7df806f Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sun, 19 Apr 2026 14:53:02 -0400 Subject: NFSD: Add NFSD_CMD_UNLOCK_IP netlink command The existing write_unlock_ip procfs interface releases NLM file locks held by a specific client IP address, but procfs provides no structured way to extend that operation to other scopes such as revoking NFSv4 state. Add NFSD_CMD_UNLOCK_IP as a dedicated netlink command for releasing NLM locks by client address. The command accepts a binary sockaddr_in or sockaddr_in6 in its address attribute. The handler validates the address family and length, then calls nlmsvc_unlock_all_by_ip() to release matching NLM locks. Because lockd is a single global instance, that call operates across all network namespaces regardless of which namespace the caller inhabits. A separate netlink command for filesystem-scoped unlock is added in a subsequent commit. The nfsd_ctl_unlock_ip tracepoint is updated from string-based address logging to __sockaddr, which stores the binary sockaddr and formats it with %pISpc. This affects both the new netlink path and the existing procfs write_unlock_ip path, giving consistent structured output in both cases. Reviewed-by: Jeff Layton Tested-by: Dai Ngo Signed-off-by: Chuck Lever --- include/uapi/linux/nfsd_netlink.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfsd_netlink.h b/include/uapi/linux/nfsd_netlink.h index 060c43675599..90ef1e686769 100644 --- a/include/uapi/linux/nfsd_netlink.h +++ b/include/uapi/linux/nfsd_netlink.h @@ -204,6 +204,13 @@ enum { NFSD_A_CACHE_FLUSH_MAX = (__NFSD_A_CACHE_FLUSH_MAX - 1) }; +enum { + NFSD_A_UNLOCK_IP_ADDRESS = 1, + + __NFSD_A_UNLOCK_IP_MAX, + NFSD_A_UNLOCK_IP_MAX = (__NFSD_A_UNLOCK_IP_MAX - 1) +}; + enum { NFSD_CMD_RPC_STATUS_GET = 1, NFSD_CMD_THREADS_SET, @@ -220,6 +227,7 @@ enum { NFSD_CMD_EXPKEY_GET_REQS, NFSD_CMD_EXPKEY_SET_REQS, NFSD_CMD_CACHE_FLUSH, + NFSD_CMD_UNLOCK_IP, __NFSD_CMD_MAX, NFSD_CMD_MAX = (__NFSD_CMD_MAX - 1) -- cgit v1.2.3 From 327c5168eff2e7f1760ca67fcb0f9053019fbfee Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sun, 19 Apr 2026 14:53:03 -0400 Subject: NFSD: Add NFSD_CMD_UNLOCK_FILESYSTEM netlink command Add NFSD_CMD_UNLOCK_FILESYSTEM as a dedicated netlink command for revoking NFS state under a filesystem path, providing a netlink equivalent of /proc/fs/nfsd/unlock_fs. The command requires a "path" string attribute containing the filesystem path whose state should be released. The handler resolves the path to its superblock, then cancels async copies, releases NLM locks, and revokes NFSv4 state on that superblock. Reviewed-by: Jeff Layton Tested-by: Dai Ngo Signed-off-by: Chuck Lever --- include/uapi/linux/nfsd_netlink.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfsd_netlink.h b/include/uapi/linux/nfsd_netlink.h index 90ef1e686769..d01096c06d72 100644 --- a/include/uapi/linux/nfsd_netlink.h +++ b/include/uapi/linux/nfsd_netlink.h @@ -211,6 +211,13 @@ enum { NFSD_A_UNLOCK_IP_MAX = (__NFSD_A_UNLOCK_IP_MAX - 1) }; +enum { + NFSD_A_UNLOCK_FILESYSTEM_PATH = 1, + + __NFSD_A_UNLOCK_FILESYSTEM_MAX, + NFSD_A_UNLOCK_FILESYSTEM_MAX = (__NFSD_A_UNLOCK_FILESYSTEM_MAX - 1) +}; + enum { NFSD_CMD_RPC_STATUS_GET = 1, NFSD_CMD_THREADS_SET, @@ -228,6 +235,7 @@ enum { NFSD_CMD_EXPKEY_SET_REQS, NFSD_CMD_CACHE_FLUSH, NFSD_CMD_UNLOCK_IP, + NFSD_CMD_UNLOCK_FILESYSTEM, __NFSD_CMD_MAX, NFSD_CMD_MAX = (__NFSD_CMD_MAX - 1) -- cgit v1.2.3 From 2eac189bb059d31a29937b29ee0f477394198610 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sun, 19 Apr 2026 14:53:06 -0400 Subject: NFSD: Add NFSD_CMD_UNLOCK_EXPORT netlink command When a filesystem is exported to NFS clients, NFSv4 state (opens, locks, delegations, layouts) holds references that prevent the underlying filesystem from being unmounted. NFSD_CMD_UNLOCK_FILESYSTEM addresses this at superblock granularity, but administrators unexporting a single path on a shared filesystem (e.g., one of several exports on the same device) need finer control. Add NFSD_CMD_UNLOCK_EXPORT, which revokes NFSv4 state acquired through exports of a specific path. Matching is by path identity (dentry + vfsmount) via the sc_export field on each nfs4_stid, so multiple svc_export objects for the same path -- one per auth_domain -- are handled correctly without requiring the caller to name a specific client. The command takes a single "path" attribute. Userspace (exportfs -u) sends this after removing the last client for a given path, enabling the underlying filesystem to be unmounted. When multiple clients share an export path, individual unexports do not trigger state revocation; only the final one does. Reviewed-by: Jeff Layton Tested-by: Dai Ngo Signed-off-by: Chuck Lever --- include/uapi/linux/nfsd_netlink.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfsd_netlink.h b/include/uapi/linux/nfsd_netlink.h index d01096c06d72..f5b75d5caba9 100644 --- a/include/uapi/linux/nfsd_netlink.h +++ b/include/uapi/linux/nfsd_netlink.h @@ -218,6 +218,13 @@ enum { NFSD_A_UNLOCK_FILESYSTEM_MAX = (__NFSD_A_UNLOCK_FILESYSTEM_MAX - 1) }; +enum { + NFSD_A_UNLOCK_EXPORT_PATH = 1, + + __NFSD_A_UNLOCK_EXPORT_MAX, + NFSD_A_UNLOCK_EXPORT_MAX = (__NFSD_A_UNLOCK_EXPORT_MAX - 1) +}; + enum { NFSD_CMD_RPC_STATUS_GET = 1, NFSD_CMD_THREADS_SET, @@ -236,6 +243,7 @@ enum { NFSD_CMD_CACHE_FLUSH, NFSD_CMD_UNLOCK_IP, NFSD_CMD_UNLOCK_FILESYSTEM, + NFSD_CMD_UNLOCK_EXPORT, __NFSD_CMD_MAX, NFSD_CMD_MAX = (__NFSD_CMD_MAX - 1) -- cgit v1.2.3 From 02687282c751a77b774e4a16d5e937c3ecd1731d Mon Sep 17 00:00:00 2001 From: Ethan Carter Edwards Date: Sat, 18 Apr 2026 20:49:48 -0400 Subject: virtio_console: Fix spelling mistake "colums" -> "columns" There is a spelling mistake in a struct description. Fix it. Signed-off-by: Ethan Carter Edwards Signed-off-by: Michael S. Tsirkin Message-ID: <20260418-virtio-typo-v1-1-0df6f943a79d@ethancedwards.com> --- include/uapi/linux/virtio_console.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h index 7e6ec2ff0560..0506539e6553 100644 --- a/include/uapi/linux/virtio_console.h +++ b/include/uapi/linux/virtio_console.h @@ -44,7 +44,7 @@ #define VIRTIO_CONSOLE_BAD_ID (~(__u32)0) struct virtio_console_config { - /* colums of the screens */ + /* columns of the screens */ __virtio16 cols; /* rows of the screens */ __virtio16 rows; -- cgit v1.2.3 From 083082a4e6d8311c91ac7e1d59426514c5e1c04b Mon Sep 17 00:00:00 2001 From: Matias Ezequiel Vara Larsen Date: Tue, 26 May 2026 18:42:23 +0200 Subject: can: virtio: Add virtio CAN driver Add virtio CAN driver based on Virtio 1.4 specification (see https://github.com/oasis-tcs/virtio-spec/tree/virtio-1.4). The driver implements a complete CAN bus interface over Virtio transport, supporting both CAN Classic and CAN-FD Ids. In term of frames, it supports classic and CAN FD. RTR frames are only supported with classic CAN. Usage: - "ip link set up can0" - start controller - "ip link set down can0" - stop controller - "candump can0" - receive frames - "cansend can0 123#DEADBEEF" - send frames Signed-off-by: Harald Mommer Co-developed-by: Harald Mommer Signed-off-by: Mikhail Golubev-Ciuchea Co-developed-by: Marc Kleine-Budde Signed-off-by: Marc Kleine-Budde Cc: Damir Shaikhutdinov Reviewed-by: Francesco Valla Tested-by: Francesco Valla Signed-off-by: Matias Ezequiel Vara Larsen Signed-off-by: Michael S. Tsirkin Message-ID: --- include/uapi/linux/virtio_can.h | 78 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 include/uapi/linux/virtio_can.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/virtio_can.h b/include/uapi/linux/virtio_can.h new file mode 100644 index 000000000000..08d7e3e78776 --- /dev/null +++ b/include/uapi/linux/virtio_can.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* + * Copyright (C) 2021-2023 OpenSynergy GmbH + * Copyright Red Hat, Inc. 2025 + */ +#ifndef _LINUX_VIRTIO_VIRTIO_CAN_H +#define _LINUX_VIRTIO_VIRTIO_CAN_H + +#include +#include +#include +#include + +/* Feature bit numbers */ +#define VIRTIO_CAN_F_CAN_CLASSIC 0 +#define VIRTIO_CAN_F_CAN_FD 1 +#define VIRTIO_CAN_F_RTR_FRAMES 2 +#define VIRTIO_CAN_F_LATE_TX_ACK 3 + +/* CAN Result Types */ +#define VIRTIO_CAN_RESULT_OK 0 +#define VIRTIO_CAN_RESULT_NOT_OK 1 + +/* CAN flags to determine type of CAN Id */ +#define VIRTIO_CAN_FLAGS_EXTENDED 0x8000 +#define VIRTIO_CAN_FLAGS_FD 0x4000 +#define VIRTIO_CAN_FLAGS_RTR 0x2000 + +#define VIRTIO_CAN_MAX_DLEN 64 // this is like CANFD_MAX_DLEN + +struct virtio_can_config { +#define VIRTIO_CAN_S_CTRL_BUSOFF (1u << 0) /* Controller BusOff */ + /* CAN controller status */ + __le16 status; +}; + +/* TX queue message types */ +struct virtio_can_tx_out { +#define VIRTIO_CAN_TX 0x0001 + __le16 msg_type; + __le16 length; /* 0..8 CC, 0..64 CAN-FD, 0..2048 CAN-XL, 12 bits */ + __u8 reserved_classic_dlc; /* If CAN classic length = 8 then DLC can be 8..15 */ + __u8 padding; + __le16 reserved_xl_priority; /* May be needed for CAN XL priority */ + __le32 flags; + __le32 can_id; + __u8 sdu[] __counted_by_le(length); +}; + +struct virtio_can_tx_in { + __u8 result; +}; + +/* RX queue message types */ +struct virtio_can_rx { +#define VIRTIO_CAN_RX 0x0101 + __le16 msg_type; + __le16 length; /* 0..8 CC, 0..64 CAN-FD, 0..2048 CAN-XL, 12 bits */ + __u8 reserved_classic_dlc; /* If CAN classic length = 8 then DLC can be 8..15 */ + __u8 padding; + __le16 reserved_xl_priority; /* May be needed for CAN XL priority */ + __le32 flags; + __le32 can_id; + __u8 sdu[] __counted_by_le(length); +}; + +/* Control queue message types */ +struct virtio_can_control_out { +#define VIRTIO_CAN_SET_CTRL_MODE_START 0x0201 +#define VIRTIO_CAN_SET_CTRL_MODE_STOP 0x0202 + __le16 msg_type; +}; + +struct virtio_can_control_in { + __u8 result; +}; + +#endif /* #ifndef _LINUX_VIRTIO_VIRTIO_CAN_H */ -- cgit v1.2.3 From 8cb2c9285e4ce9154f45fb15633ebd45dfd8d9cf Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Thu, 4 Jun 2026 15:57:15 -0700 Subject: can: virtio: Fix comment in UAPI header When compile testing the UAPI headers with clang, there is an warning turned error for using a C++ style ('//') comment, which is explicitly forbidden for UAPI headers. In file included from :1: ./usr/include/linux/virtio_can.h:29:35: error: // comments are not allowed in this language [-Werror,-Wcomment] 29 | #define VIRTIO_CAN_MAX_DLEN 64 // this is like CANFD_MAX_DLEN | ^ 1 error generated. Switch to a standard C style comment. Fixes: 2b6b4bb7d96f ("can: virtio: Add virtio CAN driver") Signed-off-by: Nathan Chancellor Signed-off-by: Michael S. Tsirkin Message-ID: <20260604-virtio_can-fix-uapi-comment-v1-1-199fa96ec5f0@kernel.org> --- include/uapi/linux/virtio_can.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/virtio_can.h b/include/uapi/linux/virtio_can.h index 08d7e3e78776..e054d5099241 100644 --- a/include/uapi/linux/virtio_can.h +++ b/include/uapi/linux/virtio_can.h @@ -26,7 +26,7 @@ #define VIRTIO_CAN_FLAGS_FD 0x4000 #define VIRTIO_CAN_FLAGS_RTR 0x2000 -#define VIRTIO_CAN_MAX_DLEN 64 // this is like CANFD_MAX_DLEN +#define VIRTIO_CAN_MAX_DLEN 64 /* this is like CANFD_MAX_DLEN */ struct virtio_can_config { #define VIRTIO_CAN_S_CTRL_BUSOFF (1u << 0) /* Controller BusOff */ -- cgit v1.2.3 From 32b0b8953343eaceaa816a9ead3b6bb66355c64e Mon Sep 17 00:00:00 2001 From: Louis Scalbert Date: Wed, 3 Jun 2026 17:03:28 +0200 Subject: bonding: 3ad: add lacp_strict configuration knob When an 802.3ad (LACP) bonding interface has no slaves in the collecting/distributing state, the bonding master still reports carrier as up as long as at least 'min_links' slaves have carrier. In this situation, only one slave is effectively used for TX/RX, while traffic received on other slaves is dropped. Upper-layer daemons therefore consider the interface operational, even though traffic may be blackholed if the lack of LACP negotiation means the partner is not ready to deal with traffic. Introduce a configuration knob to control this behavior. It allows the bonding master to assert carrier only when at least 'min_links' slaves are in Collecting_Distributing state. The default mode preserves the existing behavior. This patch only introduces the knob; its behavior is implemented in the subsequent commit. Fixes: 655f8919d549 ("bonding: add min links parameter to 802.3ad") Signed-off-by: Louis Scalbert Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20260603150331.1919611-4-louis.scalbert@6wind.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/if_link.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 363526549a01..43cecca49f01 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -1603,6 +1603,7 @@ enum { IFLA_BOND_NS_IP6_TARGET, IFLA_BOND_COUPLED_CONTROL, IFLA_BOND_BROADCAST_NEIGH, + IFLA_BOND_LACP_STRICT, __IFLA_BOND_MAX, }; -- cgit v1.2.3 From e98a9c61721c14bcd29f11f4802e52e908701f7a Mon Sep 17 00:00:00 2001 From: Tarun Sahu Date: Thu, 11 Jun 2026 09:30:40 +0000 Subject: liveupdate: Document that retrieve failure is permanent Signed-off-by: Tarun Sahu Reviewed-by: Pratyush Yadav (Google) Link: https://patch.msgid.link/faec5df2a3e90240cde5897bae2250cd7d44aeac.1781170056.git.tarunsahu@google.com Signed-off-by: Mike Rapoport (Microsoft) --- include/uapi/linux/liveupdate.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/liveupdate.h b/include/uapi/linux/liveupdate.h index 3a9ff53b02e0..4043d4038712 100644 --- a/include/uapi/linux/liveupdate.h +++ b/include/uapi/linux/liveupdate.h @@ -169,7 +169,9 @@ struct liveupdate_session_preserve_fd { * associated with the token and populates the @fd field with a new file * descriptor referencing the restored resource in the current (new) kernel. * This operation must be performed *before* signaling completion via - * %LIVEUPDATE_IOCTL_FINISH. + * %LIVEUPDATE_IOCTL_FINISH. If a retrieve of a token fails, subsequent + * attempts to retrieve the token fail with the same error code. Failed + * retrieves are not retried. * * Return: 0 on success, negative error code on failure (e.g., invalid token). */ -- cgit v1.2.3 From 13655144ddcad532c4e9338788041654a54e5c2f Mon Sep 17 00:00:00 2001 From: Fidelio Lawson Date: Tue, 9 Jun 2026 18:19:56 +0200 Subject: net: ethtool: add KSZ87xx low-loss cable PHY tunables Introduce vendor-specific PHY tunable identifiers to control the KSZ87xx low-loss cable erratum handling through the ethtool PHY tunable interface. The following tunables are added: - a boolean "short-cable" tunable, applying a documented and conservative preset intended for short or low-loss Ethernet cables; - an integer LPF bandwidth tunable, allowing advanced adjustment of the receiver low-pass filter bandwidth; - an integer DSP EQ initial value tunable, allowing advanced tuning of the PHY equalizer initialization. The actual behavior is implemented by the corresponding PHY and switch drivers. Reviewed-by: Marek Vasut Reviewed-by: Nicolai Buchwitz Signed-off-by: Fidelio Lawson Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-2-9ba4418cf3db@exotec.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/ethtool.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 1cdfb8341df2..a2091d4e00f3 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -291,6 +291,9 @@ enum phy_tunable_id { ETHTOOL_PHY_DOWNSHIFT, ETHTOOL_PHY_FAST_LINK_DOWN, ETHTOOL_PHY_EDPD, + ETHTOOL_PHY_SHORT_CABLE_PRESET, + ETHTOOL_PHY_LPF_BW, + ETHTOOL_PHY_DSP_EQ_INIT_VALUE, /* * Add your fresh new phy tunable attribute above and remember to update * phy_tunable_strings[] in net/ethtool/common.c -- cgit v1.2.3 From 298ab7e6f1637cec44163f52e84e2030ec16ed9d Mon Sep 17 00:00:00 2001 From: Alex Mastro Date: Wed, 10 Jun 2026 13:44:41 -0700 Subject: iommufd: Clarify IOAS_MAP_FILE dma-buf support IOMMU_IOAS_MAP_FILE is documented as mapping a memfd, but the implementation first tries to resolve the fd as a dma-buf and has a special path for supported dma-buf exporters. In particular, VFIO PCI dma-bufs exported through VFIO_DEVICE_FEATURE_DMA_BUF can be mapped when they describe a single DMA range. Update the UAPI comment so userspace understands that certain kinds of dma-buf are supported in addition to memfd. Fixes: 44ebaa1744fd ("iommufd: Accept a DMABUF through IOMMU_IOAS_MAP_FILE") Link: https://patch.msgid.link/r/20260610-tmp-v1-1-b8ccbf557391@fb.com Signed-off-by: Alex Mastro Assisted-by: Codex:gpt-5.5-high Signed-off-by: Jason Gunthorpe --- include/uapi/linux/iommufd.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/iommufd.h b/include/uapi/linux/iommufd.h index e998dfbd6960..0425d452d41e 100644 --- a/include/uapi/linux/iommufd.h +++ b/include/uapi/linux/iommufd.h @@ -224,13 +224,17 @@ struct iommu_ioas_map { * @size: sizeof(struct iommu_ioas_map_file) * @flags: same as for iommu_ioas_map * @ioas_id: same as for iommu_ioas_map - * @fd: the memfd to map - * @start: byte offset from start of file to map from + * @fd: the memfd or supported dma-buf file to map + * @start: byte offset from start of the file to map from * @length: same as for iommu_ioas_map * @iova: same as for iommu_ioas_map * - * Set an IOVA mapping from a memfd file. All other arguments and semantics - * match those of IOMMU_IOAS_MAP. + * Set an IOVA mapping from a memfd file. On kernels with dma-buf support, + * supported dma-buf files may also be accepted. This is not a generic + * dma-buf import path; currently supported dma-bufs include single-range + * VFIO PCI dma-bufs exported through VFIO_DEVICE_FEATURE_DMA_BUF, and + * other dma-bufs may be rejected. All other arguments and semantics match + * those of IOMMU_IOAS_MAP. */ struct iommu_ioas_map_file { __u32 size; -- cgit v1.2.3 From cdae65fc43f28b6508d85fa242264f3bc5c9a5c7 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Thu, 11 Jun 2026 12:21:33 +0200 Subject: tls: remove tls_toe and the related driver The tls_toe feature and its single user (chelsio chtls) have been unmaintained for multiple years. It also hooks into the core of the TCP implementation, and bypasses most of the networking stack. Signed-off-by: Sabrina Dubroca Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/1f30e73275c07bf879f547589872d0916025a52e.1781165969.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski --- include/uapi/linux/tls.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index b8b9c42f848c..1245ab38afc1 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -203,6 +203,6 @@ enum { #define TLS_CONF_BASE 1 #define TLS_CONF_SW 2 #define TLS_CONF_HW 3 -#define TLS_CONF_HW_RECORD 4 +#define TLS_CONF_HW_RECORD 4 /* unused */ #endif /* _UAPI_LINUX_TLS_H */ -- cgit v1.2.3 From 06c2dce2d0f69727144443664182052f56d1da35 Mon Sep 17 00:00:00 2001 From: Wei Wang Date: Mon, 8 Jun 2026 16:31:10 -0700 Subject: psp: add new netlink cmd for dev-assoc and dev-disassoc The main purpose of this cmd is to be able to associate a non-psp-capable device (e.g. veth or netkit) with a psp device. One use case is if we create a pair of veth/netkit, and assign 1 end inside a netns, while leaving the other end within the default netns, with a real PSP device, e.g. netdevsim or a physical PSP-capable NIC. With this command, we could associate the veth/netkit inside the netns with PSP device, so the virtual device could act as PSP-capable device to initiate PSP connections, and performs PSP encryption/decryption on the real PSP device. Signed-off-by: Wei Wang Reviewed-by: Daniel Zahka Link: https://patch.msgid.link/20260608233118.2694144-3-weibunny.kernel@gmail.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/psp.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/psp.h b/include/uapi/linux/psp.h index a3a336488dc3..1c8899cd4da5 100644 --- a/include/uapi/linux/psp.h +++ b/include/uapi/linux/psp.h @@ -17,11 +17,22 @@ enum psp_version { PSP_VERSION_HDR0_AES_GMAC_256, }; +enum { + PSP_A_ASSOC_DEV_INFO_IFINDEX = 1, + PSP_A_ASSOC_DEV_INFO_NSID, + + __PSP_A_ASSOC_DEV_INFO_MAX, + PSP_A_ASSOC_DEV_INFO_MAX = (__PSP_A_ASSOC_DEV_INFO_MAX - 1) +}; + enum { PSP_A_DEV_ID = 1, PSP_A_DEV_IFINDEX, PSP_A_DEV_PSP_VERSIONS_CAP, PSP_A_DEV_PSP_VERSIONS_ENA, + PSP_A_DEV_ASSOC_LIST, + PSP_A_DEV_NSID, + PSP_A_DEV_BY_ASSOCIATION, __PSP_A_DEV_MAX, PSP_A_DEV_MAX = (__PSP_A_DEV_MAX - 1) @@ -74,6 +85,8 @@ enum { PSP_CMD_RX_ASSOC, PSP_CMD_TX_ASSOC, PSP_CMD_GET_STATS, + PSP_CMD_DEV_ASSOC, + PSP_CMD_DEV_DISASSOC, __PSP_CMD_MAX, PSP_CMD_MAX = (__PSP_CMD_MAX - 1) -- cgit v1.2.3 From 9375487c0c78817b3651e2621d648c6198757c41 Mon Sep 17 00:00:00 2001 From: Grzegorz Nitka Date: Sun, 7 Jun 2026 20:30:33 +0200 Subject: dpll: add generic DPLL type Add DPLL_TYPE_GENERIC to represent DPLL devices which do not fit the existing PPS or EEC classes. The UAPI type is intentionally generic. During netdev discussion, maintainers pointed out that introducing identifiers tied to a specific placement or single design does not scale across ASICs and vendors. The role of a DPLL is already inferable from the spawning driver, bus device, and pin topology, without encoding additional purpose-specific taxonomy in the type name. Using a generic type keeps the UAPI extensible and avoids premature naming that may become incorrect as new hardware topologies are exposed through the DPLL subsystem. Expose the new type through UAPI and netlink specification as "generic". Reviewed-by: Aleksandr Loktionov Reviewed-by: Jiri Pirko Signed-off-by: Grzegorz Nitka Link: https://patch.msgid.link/20260607183045.1213735-2-grzegorz.nitka@intel.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/dpll.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h index cb363cccf2e2..55eaa82f5f98 100644 --- a/include/uapi/linux/dpll.h +++ b/include/uapi/linux/dpll.h @@ -109,10 +109,12 @@ enum dpll_clock_quality_level { * enum dpll_type - type of dpll, valid values for DPLL_A_TYPE attribute * @DPLL_TYPE_PPS: dpll produces Pulse-Per-Second signal * @DPLL_TYPE_EEC: dpll drives the Ethernet Equipment Clock + * @DPLL_TYPE_GENERIC: generic dpll type for devices outside PPS/EEC classes */ enum dpll_type { DPLL_TYPE_PPS = 1, DPLL_TYPE_EEC, + DPLL_TYPE_GENERIC, /* private: */ __DPLL_TYPE_MAX, -- cgit v1.2.3 From 9a8ed15ce22472fe0363e33738b4317d06b13c3a Mon Sep 17 00:00:00 2001 From: Matthieu Buffet Date: Thu, 11 Jun 2026 18:21:01 +0200 Subject: landlock: Add UDP bind() access control MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for a first fine-grained UDP access right. LANDLOCK_ACCESS_NET_BIND_UDP controls the ability to set the local port of a UDP socket (via bind()). It will be useful for servers (to start receiving datagrams), and for some clients that need to use a specific source port (e.g. mDNS requires to use port 5353) For obvious performance concerns, access control is only enforced when configuring sockets, not when using them for common send/recv operations. Bump ABI to allow userspace to detect and use this new right. Signed-off-by: Matthieu Buffet Link: https://patch.msgid.link/20260611162107.49278-2-matthieu@buffet.re [mic: Fix comment formatting] Signed-off-by: Mickaël Salaün --- include/uapi/linux/landlock.h | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/landlock.h b/include/uapi/linux/landlock.h index 10a346e55e95..f2927681e92d 100644 --- a/include/uapi/linux/landlock.h +++ b/include/uapi/linux/landlock.h @@ -200,10 +200,10 @@ struct landlock_net_port_attr { * (also used for IPv6), and within that range, on a per-socket basis * with ``setsockopt(IP_LOCAL_PORT_RANGE)``. * - * A Landlock rule with port 0 and the %LANDLOCK_ACCESS_NET_BIND_TCP - * right means that requesting to bind on port 0 is allowed and it will - * automatically translate to binding on a kernel-assigned ephemeral - * port. + * A Landlock rule with port 0 and the %LANDLOCK_ACCESS_NET_BIND_TCP or + * %LANDLOCK_ACCESS_NET_BIND_UDP right means that requesting to bind on + * port 0 is allowed and it will automatically translate to binding on a + * kernel-assigned ephemeral port. */ __u64 port; }; @@ -373,10 +373,16 @@ struct landlock_net_port_attr { * port. Support added in Landlock ABI version 4. * - %LANDLOCK_ACCESS_NET_CONNECT_TCP: Connect TCP sockets to the given * remote port. Support added in Landlock ABI version 4. + * + * And similarly for UDP port numbers: + * + * - %LANDLOCK_ACCESS_NET_BIND_UDP: Bind UDP sockets to the given local + * port. Support added in Landlock ABI version 10. */ /* clang-format off */ #define LANDLOCK_ACCESS_NET_BIND_TCP (1ULL << 0) #define LANDLOCK_ACCESS_NET_CONNECT_TCP (1ULL << 1) +#define LANDLOCK_ACCESS_NET_BIND_UDP (1ULL << 2) /* clang-format on */ /** -- cgit v1.2.3 From e61247a2e694d17236149135b2d22f0f7d19578c Mon Sep 17 00:00:00 2001 From: Matthieu Buffet Date: Thu, 11 Jun 2026 18:21:02 +0200 Subject: landlock: Add UDP send+connect access control MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for a second fine-grained UDP access right. LANDLOCK_ACCESS_NET_CONNECT_SEND_UDP controls the ability to set the remote port of a socket (via connect()) and to specify an explicit destination when sending a datagram, to override any remote peer set on a UDP socket (e.g. in sendto() or sendmsg()). It will be useful for applications that send datagrams, and for some servers too (those creating per-client sockets, which want to receive traffic only from a specific address). Similarly as for bind(), this access control is performed when configuring sockets, not in hot code paths. Add detection of when autobind is about to be required, and deny the operation if the process would not be allowed to call bind(0) explicitly. Autobind can only be performed in udp_lib_get_port() from code paths already controlled by LSM hooks: when connect()ing, sending a first datagram, and in some splice() EOF edge case which, afaiu, can only happen after a remote peer has been set. This invariant needs to be preserved to keep bind policies actually enforced. Signed-off-by: Matthieu Buffet Link: https://patch.msgid.link/20260611162107.49278-3-matthieu@buffet.re [mic: Add quick return for non-sandboxed tasks, fix sa_family dereferencing, fix comment formatting] Signed-off-by: Mickaël Salaün --- include/uapi/linux/landlock.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/landlock.h b/include/uapi/linux/landlock.h index f2927681e92d..811ec77f9105 100644 --- a/include/uapi/linux/landlock.h +++ b/include/uapi/linux/landlock.h @@ -378,11 +378,34 @@ struct landlock_net_port_attr { * * - %LANDLOCK_ACCESS_NET_BIND_UDP: Bind UDP sockets to the given local * port. Support added in Landlock ABI version 10. + * - %LANDLOCK_ACCESS_NET_CONNECT_SEND_UDP: Set the remote port of UDP + * sockets to the given port, or send datagrams to the given remote port + * ignoring any destination pre-set on a socket. Support added in + * Landlock ABI version 10. + * + * .. note:: Setting a remote address or sending a first datagram + * auto-binds UDP sockets to an ephemeral local source port if not + * already bound. To allow this if both %LANDLOCK_ACCESS_NET_BIND_UDP + * and %LANDLOCK_ACCESS_NET_CONNECT_SEND_UDP are handled, you need to + * either: + * + * - use a socket already bound to a port before the ruleset started + * being enforced; + * - or grant %LANDLOCK_ACCESS_NET_BIND_UDP on port 0, meaning "any + * port in the ephemeral port range"; + * - or grant %LANDLOCK_ACCESS_NET_BIND_UDP on a specific port, and + * call :manpage:`bind(2)` on that port before trying to + * :manpage:`connect(2)` or send datagrams. + * + * .. note:: Sending datagrams to an ``AF_UNSPEC`` destination address + * family is not supported for IPv6 UDP sockets: you will need to use a + * ``NULL`` address instead. */ /* clang-format off */ #define LANDLOCK_ACCESS_NET_BIND_TCP (1ULL << 0) #define LANDLOCK_ACCESS_NET_CONNECT_TCP (1ULL << 1) #define LANDLOCK_ACCESS_NET_BIND_UDP (1ULL << 2) +#define LANDLOCK_ACCESS_NET_CONNECT_SEND_UDP (1ULL << 3) /* clang-format on */ /** -- cgit v1.2.3 From eb7b4d458e0d6833ffbb717edf4282f5ca6a7b57 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Tue, 9 Jun 2026 09:34:48 +0530 Subject: devlink: Implement devlink param multi attribute nested data values Devlink param value attribute is not defined since devlink is handling the value validating and parsing internally, this allows us to implement multi attribute values without breaking any policies. Devlink param multi-attribute values are considered to be dynamically sized arrays of u64 values, by introducing a new devlink param type DEVLINK_PARAM_TYPE_U64_ARRAY, driver and user space can set a variable count of u64 values into the DEVLINK_ATTR_PARAM_VALUE_DATA attribute. Implement get/set parsing and add to the internal value structure passed to drivers. This is useful for devices that need to configure a list of values for a specific configuration. example: $ devlink dev param show pci/... name multi-value-param name multi-value-param type driver-specific values: cmode permanent value: 0,1,2,3,4,5,6,7 $ devlink dev param set pci/... name multi-value-param \ value 4,5,6,7,0,1,2,3 cmode permanent Signed-off-by: Saeed Mahameed Signed-off-by: Ratheesh Kannoth Link: https://patch.msgid.link/20260609040453.711932-5-rkannoth@marvell.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/devlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index 0b165eac7619..ca713bcc47b9 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -406,6 +406,7 @@ enum devlink_var_attr_type { DEVLINK_VAR_ATTR_TYPE_BINARY, __DEVLINK_VAR_ATTR_TYPE_CUSTOM_BASE = 0x80, /* Any possible custom types, unrelated to NLA_* values go below */ + DEVLINK_VAR_ATTR_TYPE_U64_ARRAY, }; enum devlink_attr { -- cgit v1.2.3 From 29752205db5ff1793437b352c9e343b8e41fb184 Mon Sep 17 00:00:00 2001 From: Tingmao Wang Date: Fri, 12 Jun 2026 02:48:48 +0100 Subject: landlock: Add API support and docs for the quiet flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds the UAPI for the quiet flags feature (but not the implementation yet). Even though currently LANDLOCK_ADD_RULE_QUIET only affects audit logging, in the future this can also be used as part of a supervisor mechanism, where it will also suppress denial notifications on a per-object basis. Thus the name is deliberately generic, as opposed to e.g. LANDLOCK_ADD_RULE_LOG_QUIET. According to pahole, even after adding the struct access_masks quiet_masks in struct landlock_hierarchy, the u32 log_* bitfield still only has a size of 2 bytes, so there's minimal wasted space. Assisted-by: GitHub-Copilot:claude-opus-4.8 Signed-off-by: Tingmao Wang [mic: Update date, fix comment formatting] Link: https://patch.msgid.link/031184748a8e74c0bb02f1fa13d7a3f10918c627.1781228815.git.m@maowtm.org Signed-off-by: Mickaël Salaün --- include/uapi/linux/landlock.h | 60 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/landlock.h b/include/uapi/linux/landlock.h index 811ec77f9105..7ffe2ef127ee 100644 --- a/include/uapi/linux/landlock.h +++ b/include/uapi/linux/landlock.h @@ -32,6 +32,19 @@ * *handle* a wide range or all access rights that they know about at build time * (and that they have tested with a kernel that supported them all). * + * @quiet_access_fs and @quiet_access_net are bitmasks of actions for which a + * denial by this layer will not trigger a log if the corresponding object (or + * its children, for filesystem rules) is marked with the "quiet" bit via + * %LANDLOCK_ADD_RULE_QUIET, even if logging would normally take place per + * landlock_restrict_self() flags. @quiet_scoped is similar, except that it + * does not require marking any objects as quiet - if the ruleset is created + * with any bits set in @quiet_scoped, then denial of such scoped resources will + * not trigger any log. These 3 fields are available since Landlock ABI version + * 10. + * + * @quiet_access_fs, @quiet_access_net and @quiet_scoped must be a subset of + * @handled_access_fs, @handled_access_net and @scoped respectively. + * * This structure can grow in future Landlock versions. */ struct landlock_ruleset_attr { @@ -51,6 +64,20 @@ struct landlock_ruleset_attr { * resources (e.g. IPCs). */ __u64 scoped; + /** + * @quiet_access_fs: Bitmask of filesystem actions which should not be + * logged if per-object quiet flag is set. + */ + __u64 quiet_access_fs; + /** + * @quiet_access_net: Bitmask of network actions which should not be + * logged if per-object quiet flag is set. + */ + __u64 quiet_access_net; + /** + * @quiet_scoped: Bitmask of scoped actions which should not be logged. + */ + __u64 quiet_scoped; }; /** @@ -69,6 +96,39 @@ struct landlock_ruleset_attr { #define LANDLOCK_CREATE_RULESET_ERRATA (1U << 1) /* clang-format on */ +/** + * DOC: landlock_add_rule_flags + * + * **Flags** + * + * %LANDLOCK_ADD_RULE_QUIET + * Together with the quiet_* fields in struct landlock_ruleset_attr, + * this flag controls whether Landlock will log audit messages when + * access to the objects covered by this rule is denied by this layer. + * + * If logging is enabled, when Landlock denies an access, it will + * suppress the log if all of the following are true: + * + * - this layer is the innermost layer that denied the access; + * - all accesses denied by this layer are part of the quiet_* fields + * in the related struct landlock_ruleset_attr; + * - the object (or one of its parents, for filesystem rules) is + * marked as "quiet" via %LANDLOCK_ADD_RULE_QUIET. + * + * Because logging is only suppressed by a layer if the layer denies + * access, a sandboxed program cannot use this flag to "hide" access + * denials, without denying itself the access in the first place. + * + * The effect of this flag does not depend on the value of + * allowed_access in the passed in rule_attr. When this flag is + * present, the caller is also allowed to pass in an empty + * allowed_access. + */ + +/* clang-format off */ +#define LANDLOCK_ADD_RULE_QUIET (1U << 0) +/* clang-format on */ + /** * DOC: landlock_restrict_self_flags * -- cgit v1.2.3 From 26330a9226417c9a3395db9fdb403f7d7371e6b7 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Thu, 11 Jun 2026 13:42:26 +0200 Subject: bpf: Add support to specify uprobe_multi target via file descriptor Allow uprobe_multi link to identify the target binary by an already opened file descriptor. Adding new BPF_F_UPROBE_MULTI_PATH_FD flag and the path_fd field for the attr.link_create.uprobe_multi struct. When the flag is set, we resolve the target from path_fd, without the flag, we keep the existing string path behavior. I don't see a use case for supporting O_PATH file descriptors, because we need to read the binary first to get probes offsets, so I'm using the CLASS(fd, f), which fails for O_PATH fds. Assisted-by: Codex:GPT-5.4 Signed-off-by: Jiri Olsa Link: https://lore.kernel.org/r/20260611114230.950379-4-jolsa@kernel.org Signed-off-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 11dd610fa5fa..89b36de5fdbb 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1327,7 +1327,11 @@ enum { * BPF_TRACE_UPROBE_MULTI attach type to create return probe. */ enum { - BPF_F_UPROBE_MULTI_RETURN = (1U << 0) + /* Get return uprobe. */ + BPF_F_UPROBE_MULTI_RETURN = (1U << 0), + + /* Get path from provided path_fd. */ + BPF_F_UPROBE_MULTI_PATH_FD = (1U << 1), }; /* link_create.netfilter.flags used in LINK_CREATE command for @@ -1864,6 +1868,7 @@ union bpf_attr { __u32 cnt; __u32 flags; __u32 pid; + __u32 path_fd; } uprobe_multi; struct { union { -- cgit v1.2.3 From 5c4adb7fb46fac348197c5a15c676a066dd1f88e Mon Sep 17 00:00:00 2001 From: Dragos Tatulea Date: Sat, 13 Jun 2026 00:17:03 +0300 Subject: netdev: expose io_uring rx_page_order order via netlink This adds observability for the io_uring zcrx rx-buf-len configuration. Signed-off-by: Dragos Tatulea Reviewed-by: Yael Chemla Reviewed-by: Tariq Toukan Acked-by: Pavel Begunkov Link: https://patch.msgid.link/20260612211709.1456966-3-dtatulea@nvidia.com Signed-off-by: Jakub Kicinski --- include/uapi/linux/netdev.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netdev.h b/include/uapi/linux/netdev.h index 7df1056a35fd..2f3ab75e8cc0 100644 --- a/include/uapi/linux/netdev.h +++ b/include/uapi/linux/netdev.h @@ -97,6 +97,8 @@ enum { }; enum { + NETDEV_A_IO_URING_PROVIDER_INFO_RX_BUF_LEN = 1, + __NETDEV_A_IO_URING_PROVIDER_INFO_MAX, NETDEV_A_IO_URING_PROVIDER_INFO_MAX = (__NETDEV_A_IO_URING_PROVIDER_INFO_MAX - 1) }; -- cgit v1.2.3 From 8f9616500c59bb85a06a9d1c52e59d1bf4a194c2 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 15 Jun 2026 12:44:16 -0700 Subject: atm: remove orphaned uAPI for deleted drivers, protocols and SVCs ATM removals have left a number of uAPI headers and ioctl definitions with no in-kernel implementation behind them: - device headers for adapters deleted with the legacy PCI/SBUS drivers: atm_eni.h, atm_he.h, atm_idt77105.h, atm_nicstar.h, atm_zatm.h and the atmtcp pair atm_tcp.h / - protocol headers for the removed CLIP, LANE and MPOA stacks: atmarp.h, atmclip.h, atmlec.h, atmmpc.h - atmsvc.h and the SVC / p2mp / local-address ioctls in atmdev.h (ATM_{GET,RST,ADD,DEL}ADDR, ATM_{ADD,DEL,GET}LECSADDR, ATM_{ADD,DROP}PARTY) left behind by the SVC and address-registry removals None of these are referenced by any remaining in-tree code. Let's try to delete all this. Chances are nobody cares about these headers any more. I'm keeping this separate from the kernel side code changes for ease of revert, in case I am proven wrong... Link: https://patch.msgid.link/20260615194416.752559-10-kuba@kernel.org Signed-off-by: Jakub Kicinski --- include/uapi/linux/atm_eni.h | 24 ------- include/uapi/linux/atm_he.h | 21 ------- include/uapi/linux/atm_idt77105.h | 29 --------- include/uapi/linux/atm_nicstar.h | 54 ---------------- include/uapi/linux/atm_tcp.h | 62 ------------------- include/uapi/linux/atm_zatm.h | 47 -------------- include/uapi/linux/atmarp.h | 42 ------------- include/uapi/linux/atmclip.h | 22 ------- include/uapi/linux/atmdev.h | 18 ------ include/uapi/linux/atmlec.h | 92 --------------------------- include/uapi/linux/atmmpc.h | 127 -------------------------------------- include/uapi/linux/atmsvc.h | 56 ----------------- 12 files changed, 594 deletions(-) delete mode 100644 include/uapi/linux/atm_eni.h delete mode 100644 include/uapi/linux/atm_he.h delete mode 100644 include/uapi/linux/atm_idt77105.h delete mode 100644 include/uapi/linux/atm_nicstar.h delete mode 100644 include/uapi/linux/atm_tcp.h delete mode 100644 include/uapi/linux/atm_zatm.h delete mode 100644 include/uapi/linux/atmarp.h delete mode 100644 include/uapi/linux/atmclip.h delete mode 100644 include/uapi/linux/atmlec.h delete mode 100644 include/uapi/linux/atmmpc.h delete mode 100644 include/uapi/linux/atmsvc.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/atm_eni.h b/include/uapi/linux/atm_eni.h deleted file mode 100644 index cf5bfd1a2691..000000000000 --- a/include/uapi/linux/atm_eni.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_eni.h - Driver-specific declarations of the ENI driver (for use by - driver-specific utilities) */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATM_ENI_H -#define LINUX_ATM_ENI_H - -#include - - -struct eni_multipliers { - int tx,rx; /* values are in percent and must be > 100 */ -}; - - -#define ENI_MEMDUMP _IOW('a',ATMIOC_SARPRV,struct atmif_sioc) - /* printk memory map */ -#define ENI_SETMULT _IOW('a',ATMIOC_SARPRV+7,struct atmif_sioc) - /* set buffer multipliers */ - -#endif diff --git a/include/uapi/linux/atm_he.h b/include/uapi/linux/atm_he.h deleted file mode 100644 index 9f4b43293988..000000000000 --- a/include/uapi/linux/atm_he.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_he.h */ - -#ifndef LINUX_ATM_HE_H -#define LINUX_ATM_HE_H - -#include - -#define HE_GET_REG _IOW('a', ATMIOC_SARPRV, struct atmif_sioc) - -#define HE_REGTYPE_PCI 1 -#define HE_REGTYPE_RCM 2 -#define HE_REGTYPE_TCM 3 -#define HE_REGTYPE_MBOX 4 - -struct he_ioctl_reg { - unsigned addr, val; - char type; -}; - -#endif /* LINUX_ATM_HE_H */ diff --git a/include/uapi/linux/atm_idt77105.h b/include/uapi/linux/atm_idt77105.h deleted file mode 100644 index f0fd6912a14b..000000000000 --- a/include/uapi/linux/atm_idt77105.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_idt77105.h - Driver-specific declarations of the IDT77105 driver (for - * use by driver-specific utilities) */ - -/* Written 1999 by Greg Banks . Copied from atm_suni.h. */ - - -#ifndef LINUX_ATM_IDT77105_H -#define LINUX_ATM_IDT77105_H - -#include -#include -#include - -/* - * Structure for IDT77105_GETSTAT and IDT77105_GETSTATZ ioctls. - * Pointed to by `arg' in atmif_sioc. - */ -struct idt77105_stats { - __u32 symbol_errors; /* wire symbol errors */ - __u32 tx_cells; /* cells transmitted */ - __u32 rx_cells; /* cells received */ - __u32 rx_hec_errors; /* Header Error Check errors on receive */ -}; - -#define IDT77105_GETSTAT _IOW('a',ATMIOC_PHYPRV+2,struct atmif_sioc) /* get stats */ -#define IDT77105_GETSTATZ _IOW('a',ATMIOC_PHYPRV+3,struct atmif_sioc) /* get stats and zero */ - -#endif diff --git a/include/uapi/linux/atm_nicstar.h b/include/uapi/linux/atm_nicstar.h deleted file mode 100644 index 880d368b5b9a..000000000000 --- a/include/uapi/linux/atm_nicstar.h +++ /dev/null @@ -1,54 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/****************************************************************************** - * - * atm_nicstar.h - * - * Driver-specific declarations for use by NICSTAR driver specific utils. - * - * Author: Rui Prior - * - * (C) INESC 1998 - * - ******************************************************************************/ - - -#ifndef LINUX_ATM_NICSTAR_H -#define LINUX_ATM_NICSTAR_H - -/* Note: non-kernel programs including this file must also include - * sys/types.h for struct timeval - */ - -#include -#include - -#define NS_GETPSTAT _IOWR('a',ATMIOC_SARPRV+1,struct atmif_sioc) - /* get pool statistics */ -#define NS_SETBUFLEV _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc) - /* set buffer level markers */ -#define NS_ADJBUFLEV _IO('a',ATMIOC_SARPRV+3) - /* adjust buffer level */ - -typedef struct buf_nr -{ - unsigned min; - unsigned init; - unsigned max; -}buf_nr; - - -typedef struct pool_levels -{ - int buftype; - int count; /* (At least for now) only used in NS_GETPSTAT */ - buf_nr level; -} pool_levels; - -/* type must be one of the following: */ -#define NS_BUFTYPE_SMALL 1 -#define NS_BUFTYPE_LARGE 2 -#define NS_BUFTYPE_HUGE 3 -#define NS_BUFTYPE_IOVEC 4 - - -#endif /* LINUX_ATM_NICSTAR_H */ diff --git a/include/uapi/linux/atm_tcp.h b/include/uapi/linux/atm_tcp.h deleted file mode 100644 index 7309e1bc8867..000000000000 --- a/include/uapi/linux/atm_tcp.h +++ /dev/null @@ -1,62 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by - driver-specific utilities) */ - -/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef _UAPILINUX_ATM_TCP_H -#define _UAPILINUX_ATM_TCP_H - -#include -#include -#include -#include - - -/* - * All values in struct atmtcp_hdr are in network byte order - */ - -struct atmtcp_hdr { - __u16 vpi; - __u16 vci; - __u32 length; /* ... of data part */ -}; - -/* - * All values in struct atmtcp_command are in host byte order - */ - -#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */ -#define ATMTCP_CTRL_OPEN 1 /* request/reply */ -#define ATMTCP_CTRL_CLOSE 2 /* request/reply */ - -struct atmtcp_control { - struct atmtcp_hdr hdr; /* must be first */ - int type; /* message type; both directions */ - atm_kptr_t vcc; /* both directions */ - struct sockaddr_atmpvc addr; /* suggested value from kernel */ - struct atm_qos qos; /* both directions */ - int result; /* to kernel only */ -} __ATM_API_ALIGN; - -/* - * Field usage: - * Messge type dir. hdr.v?i type addr qos vcc result - * ----------- ---- ------- ---- ---- --- --- ------ - * OPEN K->D Y Y Y Y Y 0 - * OPEN D->K - Y Y Y Y Y - * CLOSE K->D - - Y - Y 0 - * CLOSE D->K - - - - Y Y - */ - -#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */ -#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP - interface */ -#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP - interface */ - - - -#endif /* _UAPILINUX_ATM_TCP_H */ diff --git a/include/uapi/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h deleted file mode 100644 index 5135027b93c1..000000000000 --- a/include/uapi/linux/atm_zatm.h +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by - driver-specific utilities) */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATM_ZATM_H -#define LINUX_ATM_ZATM_H - -/* - * Note: non-kernel programs including this file must also include - * sys/types.h for struct timeval - */ - -#include -#include - -#define ZATM_GETPOOL _IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc) - /* get pool statistics */ -#define ZATM_GETPOOLZ _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc) - /* get statistics and zero */ -#define ZATM_SETPOOL _IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc) - /* set pool parameters */ - -struct zatm_pool_info { - int ref_count; /* free buffer pool usage counters */ - int low_water,high_water; /* refill parameters */ - int rqa_count,rqu_count; /* queue condition counters */ - int offset,next_off; /* alignment optimizations: offset */ - int next_cnt,next_thres; /* repetition counter and threshold */ -}; - -struct zatm_pool_req { - int pool_num; /* pool number */ - struct zatm_pool_info info; /* actual information */ -}; - -#define ZATM_OAM_POOL 0 /* free buffer pool for OAM cells */ -#define ZATM_AAL0_POOL 1 /* free buffer pool for AAL0 cells */ -#define ZATM_AAL5_POOL_BASE 2 /* first AAL5 free buffer pool */ -#define ZATM_LAST_POOL ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */ - -#define ZATM_TIMER_HISTORY_SIZE 16 /* number of timer adjustments to - record; must be 2^n */ - -#endif diff --git a/include/uapi/linux/atmarp.h b/include/uapi/linux/atmarp.h deleted file mode 100644 index 8e44d121fde1..000000000000 --- a/include/uapi/linux/atmarp.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef _LINUX_ATMARP_H -#define _LINUX_ATMARP_H - -#include -#include -#include - - -#define ATMARP_RETRY_DELAY 30 /* request next resolution or forget - NAK after 30 sec - should go into - atmclip.h */ -#define ATMARP_MAX_UNRES_PACKETS 5 /* queue that many packets while - waiting for the resolver */ - - -#define ATMARPD_CTRL _IO('a',ATMIOC_CLIP+1) /* become atmarpd ctrl sock */ -#define ATMARP_MKIP _IO('a',ATMIOC_CLIP+2) /* attach socket to IP */ -#define ATMARP_SETENTRY _IO('a',ATMIOC_CLIP+3) /* fill or hide ARP entry */ -#define ATMARP_ENCAP _IO('a',ATMIOC_CLIP+5) /* change encapsulation */ - - -enum atmarp_ctrl_type { - act_invalid, /* catch uninitialized structures */ - act_need, /* need address resolution */ - act_up, /* interface is coming up */ - act_down, /* interface is going down */ - act_change /* interface configuration has changed */ -}; - -struct atmarp_ctrl { - enum atmarp_ctrl_type type; /* message type */ - int itf_num;/* interface number (if present) */ - __be32 ip; /* IP address (act_need only) */ -}; - -#endif diff --git a/include/uapi/linux/atmclip.h b/include/uapi/linux/atmclip.h deleted file mode 100644 index c818bb82b4e6..000000000000 --- a/include/uapi/linux/atmclip.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atmclip.h - Classical IP over ATM */ - -/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATMCLIP_H -#define LINUX_ATMCLIP_H - -#include -#include - - -#define RFC1483LLC_LEN 8 /* LLC+OUI+PID = 8 */ -#define RFC1626_MTU 9180 /* RFC1626 default MTU */ - -#define CLIP_DEFAULT_IDLETIMER 1200 /* 20 minutes, see RFC1755 */ -#define CLIP_CHECK_INTERVAL 10 /* check every ten seconds */ - -#define SIOCMKCLIP _IO('a',ATMIOC_CLIP) /* create IP interface */ - -#endif diff --git a/include/uapi/linux/atmdev.h b/include/uapi/linux/atmdev.h index 20b0215084fc..a94e7b8360ee 100644 --- a/include/uapi/linux/atmdev.h +++ b/include/uapi/linux/atmdev.h @@ -60,14 +60,6 @@ struct atm_dev_stats { /* get interface type name */ #define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc) /* get interface ESI */ -#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc) - /* get itf's local ATM addr. list */ -#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc) - /* reset itf's ATM address list */ -#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc) - /* add a local ATM address */ -#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc) - /* remove a local ATM address */ #define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc) /* get connection identifier range */ #define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc) @@ -76,12 +68,6 @@ struct atm_dev_stats { /* set interface ESI */ #define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) /* force interface ESI */ -#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc) - /* register a LECS address */ -#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc) - /* unregister a LECS address */ -#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc) - /* retrieve LECS address(es) */ #define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) /* get AAL layer statistics */ @@ -99,10 +85,6 @@ struct atm_dev_stats { /* set backend handler */ #define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) /* use backend to make new if */ -#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) - /* add party to p2mp call */ -#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) - /* drop party from p2mp call */ /* * These are backend handkers that can be set via the ATM_SETBACKEND call diff --git a/include/uapi/linux/atmlec.h b/include/uapi/linux/atmlec.h deleted file mode 100644 index c68346bb40e6..000000000000 --- a/include/uapi/linux/atmlec.h +++ /dev/null @@ -1,92 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * ATM Lan Emulation Daemon driver interface - * - * Marko Kiiskila - */ - -#ifndef _ATMLEC_H_ -#define _ATMLEC_H_ - -#include -#include -#include -#include -#include - -/* ATM lec daemon control socket */ -#define ATMLEC_CTRL _IO('a', ATMIOC_LANE) -#define ATMLEC_DATA _IO('a', ATMIOC_LANE+1) -#define ATMLEC_MCAST _IO('a', ATMIOC_LANE+2) - -/* Maximum number of LEC interfaces (tweakable) */ -#define MAX_LEC_ITF 48 - -typedef enum { - l_set_mac_addr, - l_del_mac_addr, - l_svc_setup, - l_addr_delete, - l_topology_change, - l_flush_complete, - l_arp_update, - l_narp_req, /* LANE2 mandates the use of this */ - l_config, - l_flush_tran_id, - l_set_lecid, - l_arp_xmt, - l_rdesc_arp_xmt, - l_associate_req, - l_should_bridge /* should we bridge this MAC? */ -} atmlec_msg_type; - -#define ATMLEC_MSG_TYPE_MAX l_should_bridge - -struct atmlec_config_msg { - unsigned int maximum_unknown_frame_count; - unsigned int max_unknown_frame_time; - unsigned short max_retry_count; - unsigned int aging_time; - unsigned int forward_delay_time; - unsigned int arp_response_time; - unsigned int flush_timeout; - unsigned int path_switching_delay; - unsigned int lane_version; /* LANE2: 1 for LANEv1, 2 for LANEv2 */ - int mtu; - int is_proxy; -}; - -struct atmlec_msg { - atmlec_msg_type type; - int sizeoftlvs; /* LANE2: if != 0, tlvs follow */ - union { - struct { - unsigned char mac_addr[ETH_ALEN]; - unsigned char atm_addr[ATM_ESA_LEN]; - unsigned int flag; /* - * Topology_change flag, - * remoteflag, permanent flag, - * lecid, transaction id - */ - unsigned int targetless_le_arp; /* LANE2 */ - unsigned int no_source_le_narp; /* LANE2 */ - } normal; - struct atmlec_config_msg config; - struct { - __u16 lec_id; /* requestor lec_id */ - __u32 tran_id; /* transaction id */ - unsigned char mac_addr[ETH_ALEN]; /* dst mac addr */ - unsigned char atm_addr[ATM_ESA_LEN]; /* reqestor ATM addr */ - } proxy; /* - * For mapping LE_ARP requests to responses. Filled by - * zeppelin, returned by kernel. Used only when proxying - */ - } content; -} __ATM_API_ALIGN; - -struct atmlec_ioc { - int dev_num; - unsigned char atm_addr[ATM_ESA_LEN]; - unsigned char receive; /* 1= receive vcc, 0 = send vcc */ -}; -#endif /* _ATMLEC_H_ */ diff --git a/include/uapi/linux/atmmpc.h b/include/uapi/linux/atmmpc.h deleted file mode 100644 index cc17f4304839..000000000000 --- a/include/uapi/linux/atmmpc.h +++ /dev/null @@ -1,127 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ATMMPC_H_ -#define _ATMMPC_H_ - -#include -#include -#include -#include - -#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA) -#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1) - -#define MPC_SOCKET_INGRESS 1 -#define MPC_SOCKET_EGRESS 2 - -struct atmmpc_ioc { - int dev_num; - __be32 ipaddr; /* the IP address of the shortcut */ - int type; /* ingress or egress */ -}; - -typedef struct in_ctrl_info { - __u8 Last_NHRP_CIE_code; - __u8 Last_Q2931_cause_value; - __u8 eg_MPC_ATM_addr[ATM_ESA_LEN]; - __be32 tag; - __be32 in_dst_ip; /* IP address this ingress MPC sends packets to */ - __u16 holding_time; - __u32 request_id; -} in_ctrl_info; - -typedef struct eg_ctrl_info { - __u8 DLL_header[256]; - __u8 DH_length; - __be32 cache_id; - __be32 tag; - __be32 mps_ip; - __be32 eg_dst_ip; /* IP address to which ingress MPC sends packets */ - __u8 in_MPC_data_ATM_addr[ATM_ESA_LEN]; - __u16 holding_time; -} eg_ctrl_info; - -struct mpc_parameters { - __u16 mpc_p1; /* Shortcut-Setup Frame Count */ - __u16 mpc_p2; /* Shortcut-Setup Frame Time */ - __u8 mpc_p3[8]; /* Flow-detection Protocols */ - __u16 mpc_p4; /* MPC Initial Retry Time */ - __u16 mpc_p5; /* MPC Retry Time Maximum */ - __u16 mpc_p6; /* Hold Down Time */ -} ; - -struct k_message { - __u16 type; - __be32 ip_mask; - __u8 MPS_ctrl[ATM_ESA_LEN]; - union { - in_ctrl_info in_info; - eg_ctrl_info eg_info; - struct mpc_parameters params; - } content; - struct atm_qos qos; -} __ATM_API_ALIGN; - -struct llc_snap_hdr { - /* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */ - __u8 dsap; /* Destination Service Access Point (0xAA) */ - __u8 ssap; /* Source Service Access Point (0xAA) */ - __u8 ui; /* Unnumbered Information (0x03) */ - __u8 org[3]; /* Organizational identification (0x000000) */ - __u8 type[2]; /* Ether type (for IP) (0x0800) */ -}; - -/* TLVs this MPC recognizes */ -#define TLV_MPOA_DEVICE_TYPE 0x00a03e2a - -/* MPOA device types in MPOA Device Type TLV */ -#define NON_MPOA 0 -#define MPS 1 -#define MPC 2 -#define MPS_AND_MPC 3 - - -/* MPC parameter defaults */ - -#define MPC_P1 10 /* Shortcut-Setup Frame Count */ -#define MPC_P2 1 /* Shortcut-Setup Frame Time */ -#define MPC_P3 0 /* Flow-detection Protocols */ -#define MPC_P4 5 /* MPC Initial Retry Time */ -#define MPC_P5 40 /* MPC Retry Time Maximum */ -#define MPC_P6 160 /* Hold Down Time */ -#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */ - -/* MPC constants */ - -#define MPC_C1 2 /* Retry Time Multiplier */ -#define MPC_C2 60 /* Initial Keep-Alive Lifetime */ - -/* Message types - to MPOA daemon */ - -#define SND_MPOA_RES_RQST 201 -#define SET_MPS_CTRL_ADDR 202 -#define SND_MPOA_RES_RTRY 203 /* Different type in a retry due to req id */ -#define STOP_KEEP_ALIVE_SM 204 -#define EGRESS_ENTRY_REMOVED 205 -#define SND_EGRESS_PURGE 206 -#define DIE 207 /* tell the daemon to exit() */ -#define DATA_PLANE_PURGE 208 /* Data plane purge because of egress cache hit miss or dead MPS */ -#define OPEN_INGRESS_SVC 209 - -/* Message types - from MPOA daemon */ - -#define MPOA_TRIGGER_RCVD 101 -#define MPOA_RES_REPLY_RCVD 102 -#define INGRESS_PURGE_RCVD 103 -#define EGRESS_PURGE_RCVD 104 -#define MPS_DEATH 105 -#define CACHE_IMPOS_RCVD 106 -#define SET_MPC_CTRL_ADDR 107 /* Our MPC's control ATM address */ -#define SET_MPS_MAC_ADDR 108 -#define CLEAN_UP_AND_EXIT 109 -#define SET_MPC_PARAMS 110 /* MPC configuration parameters */ - -/* Message types - bidirectional */ - -#define RELOAD 301 /* kill -HUP the daemon for reload */ - -#endif /* _ATMMPC_H_ */ diff --git a/include/uapi/linux/atmsvc.h b/include/uapi/linux/atmsvc.h deleted file mode 100644 index 137b5f853449..000000000000 --- a/include/uapi/linux/atmsvc.h +++ /dev/null @@ -1,56 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atmsvc.h - ATM signaling kernel-demon interface definitions */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef _LINUX_ATMSVC_H -#define _LINUX_ATMSVC_H - -#include -#include -#include - - -#define ATMSIGD_CTRL _IO('a',ATMIOC_SPECIAL) - /* become ATM signaling demon control socket */ - -enum atmsvc_msg_type { as_catch_null, as_bind, as_connect, as_accept, as_reject, - as_listen, as_okay, as_error, as_indicate, as_close, - as_itf_notify, as_modify, as_identify, as_terminate, - as_addparty, as_dropparty }; - -struct atmsvc_msg { - enum atmsvc_msg_type type; - atm_kptr_t vcc; - atm_kptr_t listen_vcc; /* indicate */ - int reply; /* for okay and close: */ - /* < 0: error before active */ - /* (sigd has discarded ctx) */ - /* ==0: success */ - /* > 0: error when active (still */ - /* need to close) */ - struct sockaddr_atmpvc pvc; /* indicate, okay (connect) */ - struct sockaddr_atmsvc local; /* local SVC address */ - struct atm_qos qos; /* QOS parameters */ - struct atm_sap sap; /* SAP */ - unsigned int session; /* for p2pm */ - struct sockaddr_atmsvc svc; /* SVC address */ -} __ATM_API_ALIGN; - -/* - * Message contents: see ftp://icaftp.epfl.ch/pub/linux/atm/docs/isp-*.tar.gz - */ - -/* - * Some policy stuff for atmsigd and for net/atm/svc.c. Both have to agree on - * what PCR is used to request bandwidth from the device driver. net/atm/svc.c - * tries to do better than that, but only if there's no routing decision (i.e. - * if signaling only uses one ATM interface). - */ - -#define SELECT_TOP_PCR(tp) ((tp).pcr ? (tp).pcr : \ - (tp).max_pcr && (tp).max_pcr != ATM_MAX_PCR ? (tp).max_pcr : \ - (tp).min_pcr ? (tp).min_pcr : ATM_MAX_PCR) - -#endif -- cgit v1.2.3 From b8b09dc2bf35a00d4e0556b5d6308c7b917ebda2 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 18 Jun 2026 13:56:38 +0200 Subject: netfilter: nf_conntrack_expect: use conntrack GC to reap expectations This patch replaces the timer API by GC worker approach for expectations, as it already happened in many other subsystems. Use the existing conntrack GC worker to iterate over the local list of expectations in the master conntrack to reap expired expectations. Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct expectation which nevers sets it. Hold the expectation spinlock while iterating over the master conntrack expectation list to synchronize with nf_ct_remove_expectations(). This also performs runtime packet path garbage collection through the expectation insertion and lookup functions while walking over one of the chains of the global expectation hashtables. Unconfirmed conntrack entries are skipped since ct->ext can be reallocated and dying are skipped since those will be gone soon. Set on IPS_HELPER_BIT if the helper ct extension is added, then the new GC worker does not need to bump the ct refcount to check if the ct->ext helper is available. This removes the extra bump on the refcount for expectation timers, this allows to remove several nf_ct_expect_put() calls after the unlink, after this update only refcount remains at 1 while on the expectation hashes. This patch implicitly addresses a race with the existing timer API allowing an expectation to access a stale exp->master pointer which has been already released when expectation removal loses races with an expiring timer, ie. timer_del() reporting false. Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This is needed by nf_conntrack_unexpect_related() which is called in error paths to invalidate newly created expectations that has been added into the hashes. These expectactions cannot be inmediately released as GC or nf_ct_remove_expectations() could race to make it. On expectation insert, the runtime GC reaps stale expectations before checking the expectation limit set by policy. Set current timestamp in nf_ct_expect_alloc(), then add the expectation policy timeout (or custom timeout specified added on top of this) to specify the expectation lifetime. Fixes: bffcaad9afdf ("netfilter: ctnetlink: ensure safe access to master conntrack") Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter/nf_conntrack_common.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h index 56b6b60a814f..ee51045ae1d6 100644 --- a/include/uapi/linux/netfilter/nf_conntrack_common.h +++ b/include/uapi/linux/netfilter/nf_conntrack_common.h @@ -160,6 +160,7 @@ enum ip_conntrack_expect_events { #define NF_CT_EXPECT_USERSPACE 0x4 #ifdef __KERNEL__ +#define NF_CT_EXPECT_DEAD 0x8 #define NF_CT_EXPECT_MASK (NF_CT_EXPECT_PERMANENT | NF_CT_EXPECT_INACTIVE | \ NF_CT_EXPECT_USERSPACE) #endif -- cgit v1.2.3