From aec49a34d928a0ecdea85bd9f6b4114b668b68b8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 Jul 2026 18:52:09 -0700 Subject: ata: libata: avoid kernel-doc warnings Modify comments to prevent kernel-doc warnings: - use "/*" for a non-kernel-doc comment - add a Returns: section for ata_id_major_version() Warning: include/linux/ata.h:770 Cannot find identifier on line: * Warning: include/linux/ata.h:782 function parameter 'id' not described in 'ata_id_sct_data_tables' Warning: include/linux/ata.h:782 expecting prototype for Word(). Prototype was for ata_id_sct_data_tables() instead Warning: include/linux/ata.h:820 No description found for return value of 'ata_id_major_version' Signed-off-by: Randy Dunlap Signed-off-by: Damien Le Moal --- include/linux/ata.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 8fd48bcb2a46..7daad4cad985 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -762,8 +762,7 @@ static inline bool ata_id_sense_reporting_enabled(const u16 *id) return id[ATA_ID_COMMAND_SET_4] & BIT(6); } -/** - * +/* * Word: 206 - SCT Command Transport * 15:12 - Vendor Specific * 11:6 - Reserved @@ -810,8 +809,9 @@ static inline bool ata_id_sct_supported(const u16 *id) * * The practical impact of this is that ata_id_major_version cannot * reliably report on drives below ATA3. + * + * Returns: major version of ATA drive level or %0 if unknown */ - static inline unsigned int ata_id_major_version(const u16 *id) { unsigned int mver; -- cgit v1.2.3 From 1e024d2b41ee32bc06818f7f09a3562c58842cf9 Mon Sep 17 00:00:00 2001 From: Matt Vollrath Date: Fri, 24 Jul 2026 03:39:42 -0400 Subject: ata: libata-eh: Increase STANDBY IMMEDIATE timeout Correct a previous change (see Fixes) which reduced the standby timeout from 30 to 5 seconds. Increase it to 15 seconds. I was troubleshooting an error spotted during system suspend: [ 1217.152867] ata1.00: Entering standby power mode [ 1222.322948] ata1.00: qc timeout after 5000 msecs (cmd 0xe0) [ 1222.324010] ata1.00: STANDBY IMMEDIATE failed (err_mask=0x4) This drive is a Samsung 870 EVO SSD in good SMART standing, and I wasn't aware of any reason it should be taking so long to standby. The issue is intermittent, but I observed it sometimes taking 7 seconds to manually standby. I assume this was interruption of background maintenance after a power outage. As a desktop user, I would prefer to wait the extra 2 seconds at suspend to let the drive finish its business rather than drop the rails from under it. The change from 30 to 5 seconds was implicit when switching suspend from START STOP UNIT to an internal command with no timeout table entry. No reason was stated for the change. Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Cc: stable@vger.kernel.org Signed-off-by: Matt Vollrath Assisted-by: Claude:claude-5-fable Signed-off-by: Damien Le Moal --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 96e626d6a7ca..6c0d385b2cde 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -425,7 +425,7 @@ enum { /* This should match the actual table size of * ata_eh_cmd_timeout_table in libata-eh.c. */ - ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 8, + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 9, /* User visible DMA mask for DMA control. DO NOT renumber. */ ATA_DMA_MASK_ATA = (1 << 0), /* DMA on ATA Disk */ -- cgit v1.2.3 From 2e1d2e65e773d67dab163127f11a47dab0fbca9f Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 9 Jul 2026 10:01:33 +0900 Subject: ata: libata-scsi: terminate deferred commands on time out If a command times out while we have deferred non-NCQ commands waiting to be issued, the SCSI EH task is not immediately woken up as the waiting deferred commands are never issued nor completed, thus leaving the SCSI host in a busy state (shost->host_failed != scsi_host_busy(shost)) which prevents the SCSI EH task from being woken up. Eventually, when the deferred commands also time out, the SCSI EH task is woken up and the timeout processing occurs. Avoid this unnecessary SCSI EH task wake-up additional time by scheduling a retry of all waiting deferred QCs, using the eh_timed_out SCSI host template operation. The function ata_scsi_eh_timed_out() is introduced to implement this operation. However, terminating deferred commands with DID_REQUEUE to force a retry by calling the function ata_scsi_requeue_deferred_qc() may still keep the SCSI host in a busy state because the block layer may immediately re-issue these commands. The solution to this is to schedule libata EH for the port which suffered the command timeout to prevent accepting any new command. ata_scsi_requeue_deferred_qc() is modified to add a call to ata_port_schedule_eh() for this purpose. In addition to this change, ata_scsi_requeue_deferred_qc() is also modified to take a new timedout_scmd scsi command argument which indicates the SCSI command that timed out. With this additional argument, ata_scsi_requeue_deferred_qc() can now also terminate with DID_TIME_OUT any timed out deferred qc, which simplifies ata_scsi_cmd_error_handler(). In this case, ata_scsi_requeue_deferred_qc() returns SCSI_EH_DONE, with this return value propagated back to the ata_scsi_eh_timed_out() operation to indicate to scsi_timeout() that the timed out command was handled and no further processing is needed. For non-timed out deferred qc that need to be retried, ata_scsi_requeue_deferred_qc() returns SCSI_EH_NOT_HANDLED, thus indicating to scsi_timeout() that the timed out command needs to go through the SCSI EH (and libata EH) processing by adding it to the EH work queue with scsi_eh_scmd_add(). One side effect of these changes is that the function atapi_qc_complete() needs to be modified to ensure that a deferred ATAPI command that needs to be retried is completed with DID_REQUEUE instead of the default SAM_STAT_GOOD status, and a command that timed out is completed with DID_TIME_OUT instead of SAM_STAT_CHECK_CONDITION. Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Igor Pylypiv Tested-by: Igor Pylypiv Reviewed-by: Niklas Cassel Reviewed-by: Martin K. Petersen --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 6c0d385b2cde..f10b3287b507 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1153,6 +1153,7 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, #endif extern enum scsi_qc_status ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); +enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *cmd); #if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); #else @@ -1464,6 +1465,7 @@ extern const struct attribute_group *ata_common_sdev_groups[]; .ioctl = ata_scsi_ioctl, \ ATA_SCSI_COMPAT_IOCTL \ .queuecommand = ata_scsi_queuecmd, \ + .eh_timed_out = ata_scsi_eh_timed_out, \ .dma_need_drain = ata_scsi_dma_need_drain, \ .this_id = ATA_SHT_THIS_ID, \ .emulated = ATA_SHT_EMULATED, \ -- cgit v1.2.3 From de202d2251bc181c6019b1ad3c0ba8133e5ec68d Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 9 Jul 2026 16:02:23 +0900 Subject: scsi: libsas: terminate deferred commands on time out If a command times out while we have deferred non-NCQ commands waiting to be issued, the SCSI EH task is not immediately woken up as the waiting deferred commands are never issued nor completed, thus leaving the SCSI host in a busy state (shost->host_failed != scsi_host_busy(shost)) which prevents the SCSI EH task from being woken up. Eventually, when the deferred commands also time out, the SCSI EH task is woken up and the timeout processing occurs. Avoid this unnecessary additional SCSI EH wake up time with the same method as implemented in libata-scsi, using the eh_timed_out SCSI host template operation. The function sas_eh_timed_out() implements this operation and executes the function ata_scsi_retry_deferred_qc() for SATA devices. Co-developed-by: Igor Pylypiv Signed-off-by: Igor Pylypiv Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: John Garry Reviewed-by: Hannes Reinecke Tested-by: Igor Pylypiv Reviewed-by: Niklas Cassel Reviewed-by: Martin K. Petersen --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index f10b3287b507..1827502b9cf2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1153,6 +1153,8 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, #endif extern enum scsi_qc_status ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); +enum scsi_timeout_action ata_scsi_retry_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *scmd); enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *cmd); #if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); -- cgit v1.2.3