From c74d084f914e16e42730bcf625ab3f37a4cae8d4 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 15 Oct 2011 00:14:49 +0200 Subject: mac80211: handle HT PHY BSS membership selector value correctly 802.11n-2009 extends the supported rates element with a magic value which can be used to prevent legacy stations from joining the BSS. However, this magic value is not a rate like the others and the magic can simply be ignored/skipped at this late stage. Signed-off-by: Christian Lamparter --- Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 48363c3c40f8..9789aedb2453 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -770,6 +770,9 @@ struct ieee80211_mgmt { } u; } __attribute__ ((packed)); +/* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */ +#define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127 + /* mgmt header + 1 byte category code */ #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u) -- cgit v1.2.3 From c2e889a7f7947bc346e0a341e793fd5cb471d884 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 2 Nov 2011 23:34:56 +0200 Subject: ieee80211: Define cipher suite selector for WPI-SMS4 This value is used for WPI-SMS4 in ISO/IEC JTC 1 N 9880. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 9789aedb2453..ffc073ab3ff8 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1555,6 +1555,8 @@ enum ieee80211_sa_query_action { #define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 #define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06 +#define WLAN_CIPHER_SUITE_SMS4 0x00147201 + /* AKM suite selectors */ #define WLAN_AKM_SUITE_8021X 0x000FAC01 #define WLAN_AKM_SUITE_PSK 0x000FAC02 -- cgit v1.2.3 From 6e3e939f3b1bf8534b32ad09ff199d88800835a0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Nov 2011 10:15:42 +0100 Subject: net: add wireless TX status socket option The 802.1X EAPOL handshake hostapd does requires knowing whether the frame was ack'ed by the peer. Currently, we fudge this pretty badly by not even transmitting the frame as a normal data frame but injecting it with radiotap and getting the status out of radiotap monitor as well. This is rather complex, confuses users (mon.wlan0 presence) and doesn't work with all hardware. To get rid of that hack, introduce a real wifi TX status option for data frame transmissions. This works similar to the existing TX timestamping in that it reflects the SKB back to the socket's error queue with a SCM_WIFI_STATUS cmsg that has an int indicating ACK status (0/1). Since it is possible that at some point we will want to have TX timestamping and wifi status in a single errqueue SKB (there's little point in not doing that), redefine SO_EE_ORIGIN_TIMESTAMPING to SO_EE_ORIGIN_TXSTATUS which can collect more than just the timestamp; keep the old constant as an alias of course. Currently the internal APIs don't make that possible, but it wouldn't be hard to split them up in a way that makes it possible. Thanks to Neil Horman for helping me figure out the functions that add the control messages. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/errqueue.h | 3 ++- include/linux/skbuff.h | 19 +++++++++++++++++-- 2 files changed, 19 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h index 034072cea853..c9f522bd17e4 100644 --- a/include/linux/errqueue.h +++ b/include/linux/errqueue.h @@ -17,7 +17,8 @@ struct sock_extended_err { #define SO_EE_ORIGIN_LOCAL 1 #define SO_EE_ORIGIN_ICMP 2 #define SO_EE_ORIGIN_ICMP6 3 -#define SO_EE_ORIGIN_TIMESTAMPING 4 +#define SO_EE_ORIGIN_TXSTATUS 4 +#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS #define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1)) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6a6b352326d7..ff7e1306a2d2 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -218,6 +218,9 @@ enum { /* device driver supports TX zero-copy buffers */ SKBTX_DEV_ZEROCOPY = 1 << 4, + + /* generate wifi status information (where possible) */ + SKBTX_WIFI_STATUS = 1 << 5, }; /* @@ -352,6 +355,8 @@ typedef unsigned char *sk_buff_data_t; * @ooo_okay: allow the mapping of a socket to a queue to be changed * @l4_rxhash: indicate rxhash is a canonical 4-tuple hash over transport * ports. + * @wifi_acked_valid: wifi_acked was set + * @wifi_acked: whether frame was acked on wifi or not * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -445,10 +450,11 @@ struct sk_buff { #endif __u8 ooo_okay:1; __u8 l4_rxhash:1; + __u8 wifi_acked_valid:1; + __u8 wifi_acked:1; + /* 10/12 bit hole (depending on ndisc_nodetype presence) */ kmemcheck_bitfield_end(flags2); - /* 0/13 bit hole */ - #ifdef CONFIG_NET_DMA dma_cookie_t dma_cookie; #endif @@ -2263,6 +2269,15 @@ static inline void skb_tx_timestamp(struct sk_buff *skb) sw_tx_timestamp(skb); } +/** + * skb_complete_wifi_ack - deliver skb with wifi status + * + * @skb: the original outgoing packet + * @acked: ack status + * + */ +void skb_complete_wifi_ack(struct sk_buff *skb, bool acked); + extern __sum16 __skb_checksum_complete_head(struct sk_buff *skb, int len); extern __sum16 __skb_checksum_complete(struct sk_buff *skb); -- cgit v1.2.3 From 6cc00d545a21ed26696f3bda865ebf11eccbf2b5 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 3 Nov 2011 21:11:11 -0700 Subject: mac80211: QoS multicast frames have No Ack policy Previously QoS multicast frames had the Normal Acknowledgment QoS control bits set. This would cause broadcast frames to be discarded by peers with which we have a BA session, since their sequence number would fall outside the allowed range. Set No Ack QoS control bits on multicast QoS frames and filter these in de-aggregation code. Signed-off-by: Thomas Pedersen v2: Use proper QoS Ack Policy ctl field mask (Christian) v3: Clean up conditional (Johannes) Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ffc073ab3ff8..66cedf6eb5c2 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -128,6 +128,7 @@ #define IEEE80211_QOS_CTL_ACK_POLICY_NOACK 0x0020 #define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL 0x0040 #define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK 0x0060 +#define IEEE80211_QOS_CTL_ACK_POLICY_MASK 0x0060 /* A-MSDU 802.11n */ #define IEEE80211_QOS_CTL_A_MSDU_PRESENT 0x0080 /* Mesh Control 802.11s */ -- cgit v1.2.3 From 28946da763e8b8d8ffd01ab861b684a4afb4bc3b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 4 Nov 2011 11:18:12 +0100 Subject: nl80211: allow subscribing to unexpected class3 frames To implement AP mode without monitor interfaces we need to be able to send a deauth to stations that send frames without being associated. Enable this by adding a new nl80211 event for such frames that an application can subscribe to. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 8049bf77d799..9107adc73e0b 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -509,6 +509,16 @@ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. * + * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP + * (or GO) interface (i.e. hostapd) to ask for unexpected frames to + * implement sending deauth to stations that send unexpected class 3 + * frames. Also used as the event sent by the kernel when such a frame + * is received. + * For the event, the %NL80211_ATTR_MAC attribute carries the TA and + * other attributes like the interface index are present. + * If used as the command it must have an interface index and you can + * only unsubscribe from the event by closing the socket. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -638,6 +648,8 @@ enum nl80211_commands { NL80211_CMD_TDLS_OPER, NL80211_CMD_TDLS_MGMT, + NL80211_CMD_UNEXPECTED_FRAME, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3 From 562a74803f4881772ba2375ec4e5aa0ad90f4caa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 7 Nov 2011 12:39:33 +0100 Subject: nl80211: advertise device AP SME Add the ability to advertise that the device contains the AP SME and what features it can support. There are currently no features in the bitmap -- probe response offload will be advertised by a few patches Arik is working on now (who took over from Guy Eilam) and a device with AP SME will typically implement and require response offload. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 9107adc73e0b..ff39e4b234d4 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1121,6 +1121,11 @@ enum nl80211_commands { * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be * used for asking the driver to perform a TDLS operation. * + * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices + * that have AP support to indicate that they have the AP SME integrated + * with support for the features listed in this attribute, see + * &enum nl80211_ap_sme_features. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1349,6 +1354,8 @@ enum nl80211_attrs { NL80211_ATTR_TDLS_SUPPORT, NL80211_ATTR_TDLS_EXTERNAL_SETUP, + NL80211_ATTR_DEVICE_AP_SME, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2662,4 +2669,12 @@ enum nl80211_tdls_operation { NL80211_TDLS_DISABLE_LINK, }; +/* + * enum nl80211_ap_sme_features - device-integrated AP features + * Reserved for future use, no bits are defined in + * NL80211_ATTR_DEVICE_AP_SME yet. +enum nl80211_ap_sme_features { +}; + */ + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 7f6cf311a594c1e7ca8120367dd1d4c685aabff1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 4 Nov 2011 11:18:15 +0100 Subject: nl80211: add API to probe a client When the AP SME in hostapd is used it wants to probe the clients when they have been idle for some time. Add explicit API to support this. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index ff39e4b234d4..901a70d327d1 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -519,6 +519,14 @@ * If used as the command it must have an interface index and you can * only unsubscribe from the event by closing the socket. * + * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface + * by sending a null data frame to it and reporting when the frame is + * acknowleged. This is used to allow timing out inactive clients. Uses + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a + * direct reply with an %NL80211_ATTR_COOKIE that is later used to match + * up the event with the request. The event includes the same data and + * has %NL80211_ATTR_ACK set if the frame was ACKed. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -650,6 +658,8 @@ enum nl80211_commands { NL80211_CMD_UNEXPECTED_FRAME, + NL80211_CMD_PROBE_CLIENT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3 From 5e760230e42cf759bd923457ca2753aacf2e656e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 4 Nov 2011 11:18:17 +0100 Subject: cfg80211: allow registering to beacons Add the ability to register to received beacon frames to allow implementing OLBC logic in userspace. The registration is per wiphy since there's no point in receiving the same frame multiple times. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 901a70d327d1..c29a284c27e6 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -527,6 +527,11 @@ * up the event with the request. The event includes the same data and * has %NL80211_ATTR_ACK set if the frame was ACKed. * + * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from + * other BSSes when any interfaces are in AP mode. This helps implement + * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME + * messages. Note that per PHY only one application may register. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -660,6 +665,8 @@ enum nl80211_commands { NL80211_CMD_PROBE_CLIENT, + NL80211_CMD_REGISTER_BEACONS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3 From b92ab5d86dafc2b3733c5fdd5def40c8fe7ea7c9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 4 Nov 2011 11:18:19 +0100 Subject: cfg80211: add event for unexpected 4addr frames The frames are used by AP/STA WDS mode, and hostapd needs to know when such a frame was received to set up the VLAN appropriately to allow using it. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index c29a284c27e6..09474ab7de8c 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -517,7 +517,13 @@ * For the event, the %NL80211_ATTR_MAC attribute carries the TA and * other attributes like the interface index are present. * If used as the command it must have an interface index and you can - * only unsubscribe from the event by closing the socket. + * only unsubscribe from the event by closing the socket. Subscription + * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. + * + * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the + * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame + * and wasn't already in a 4-addr VLAN. The event will be sent similarly + * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. * * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface * by sending a null data frame to it and reporting when the frame is @@ -667,6 +673,8 @@ enum nl80211_commands { NL80211_CMD_REGISTER_BEACONS, + NL80211_CMD_UNEXPECTED_4ADDR_FRAME, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3 From e247bd9068e3e86c3571147c128883596ace9d05 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 4 Nov 2011 11:18:21 +0100 Subject: cfg80211/mac80211: allow management TX to not wait for ACK For probe responses it can be useful to not wait for ACK to avoid retransmissions if the station that sent the probe is already on the next channel, so allow userspace to request not caring about the ACK with a new nl80211 flag. Since mac80211 needs to be updated for the new function prototype anyway implement it right away -- it's just a few lines of code. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 09474ab7de8c..165e16fc7af1 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1151,6 +1151,11 @@ enum nl80211_commands { * with support for the features listed in this attribute, see * &enum nl80211_ap_sme_features. * + * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells + * the driver to not wait for an acknowledgement. Note that due to this, + * it will also not give a status callback nor return a cookie. This is + * mostly useful for probe responses to save airtime. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1381,6 +1386,8 @@ enum nl80211_attrs { NL80211_ATTR_DEVICE_AP_SME, + NL80211_ATTR_DONT_WAIT_FOR_ACK, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 1f074bd8eb7a4a210a5119cd7220f89da6c7a2c3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 6 Nov 2011 14:13:33 +0100 Subject: nl80211: advertise socket TX status capability The new wifi socket TX capability should be supported by wifi drivers, let them advertise whether they do or not. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 165e16fc7af1..3152ddfb4294 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -695,6 +695,8 @@ enum nl80211_commands { #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + /* source-level API compatibility */ #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG @@ -1156,6 +1158,9 @@ enum nl80211_commands { * it will also not give a status callback nor return a cookie. This is * mostly useful for probe responses to save airtime. * + * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from + * &enum nl80211_feature_flags and is advertised in wiphy information. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1388,6 +1393,8 @@ enum nl80211_attrs { NL80211_ATTR_DONT_WAIT_FOR_ACK, + NL80211_ATTR_FEATURE_FLAGS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1422,6 +1429,7 @@ enum nl80211_attrs { #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES #define NL80211_ATTR_KEY NL80211_ATTR_KEY #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -2709,4 +2717,14 @@ enum nl80211_ap_sme_features { }; */ +/** + * enum nl80211_feature_flags - device/driver features + * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back + * TX status to the socket error queue when requested with the + * socket option. + */ +enum nl80211_feature_flags { + NL80211_FEATURE_SK_TX_STATUS = 1 << 0, +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 87bbbe22f84b91d0bcd3a7fc638e4f5e8224cc4e Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Thu, 10 Nov 2011 11:28:55 +0200 Subject: nl80211: Add probe response offload attribute Notify user-space about probe-response offloading support in the driver. A wiphy flag is used to indicate support and a bitmap of protocols determines which protocols are supported. Signed-off-by: Guy Eilam Signed-off-by: Arik Nemtsov Signed-off-by: John W. Linville --- include/linux/nl80211.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 3152ddfb4294..be92333cf8fe 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1160,6 +1160,11 @@ enum nl80211_commands { * * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from * &enum nl80211_feature_flags and is advertised in wiphy information. + * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe + * + * requests while operating in AP-mode. + * This attribute holds a bitmap of the supported protocols for + * offloading (see &enum nl80211_probe_resp_offload_support_attr). * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -1395,6 +1400,8 @@ enum nl80211_attrs { NL80211_ATTR_FEATURE_FLAGS, + NL80211_ATTR_PROBE_RESP_OFFLOAD, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2727,4 +2734,25 @@ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, }; +/** + * enum nl80211_probe_resp_offload_support_attr - optional supported + * protocols for probe-response offloading by the driver/FW. + * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. + * Each enum value represents a bit in the bitmap of supported + * protocols. Typically a subset of probe-requests belonging to a + * supported protocol will be excluded from offload and uploaded + * to the host. + * + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u + */ +enum nl80211_probe_resp_offload_support_attr { + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 00f740e1a3b7abb51980371ee8fa113df22ae0b8 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Thu, 10 Nov 2011 11:28:56 +0200 Subject: nl80211: Pass probe response data to drivers Pass probe-response data from usermode via beacon parameters. Signed-off-by: Guy Eilam Signed-off-by: Arik Nemtsov Signed-off-by: John W. Linville --- include/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index be92333cf8fe..f9261c253735 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1166,6 +1166,10 @@ enum nl80211_commands { * This attribute holds a bitmap of the supported protocols for * offloading (see &enum nl80211_probe_resp_offload_support_attr). * + * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire + * probe-response frame. The DA field in the 802.11 header is zero-ed out, + * to be filled by the FW. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1402,6 +1406,8 @@ enum nl80211_attrs { NL80211_ATTR_PROBE_RESP_OFFLOAD, + NL80211_ATTR_PROBE_RESP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3