From 8580e16c28f3f1a1bee87de115157161577334b4 Mon Sep 17 00:00:00 2001 From: Piergiorgio Beruto Date: Mon, 9 Jan 2023 17:59:39 +0100 Subject: net/ethtool: add netlink interface for the PLCA RS Add support for configuring the PLCA Reconciliation Sublayer on multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g., 10BASE-T1S). This patch adds the appropriate netlink interface to ethtool. Signed-off-by: Piergiorgio Beruto Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- include/linux/ethtool.h | 12 +++++++++++ include/linux/phy.h | 57 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 69 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 9e0a76fc7de9..d0da303f6634 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -802,12 +802,17 @@ int ethtool_virtdev_set_link_ksettings(struct net_device *dev, struct phy_device; struct phy_tdr_config; +struct phy_plca_cfg; +struct phy_plca_status; /** * struct ethtool_phy_ops - Optional PHY device options * @get_sset_count: Get number of strings that @get_strings will write. * @get_strings: Return a set of strings that describe the requested objects * @get_stats: Return extended statistics about the PHY device. + * @get_plca_cfg: Return PLCA configuration. + * @set_plca_cfg: Set PLCA configuration. + * @get_plca_status: Get PLCA configuration. * @start_cable_test: Start a cable test * @start_cable_test_tdr: Start a Time Domain Reflectometry cable test * @@ -819,6 +824,13 @@ struct ethtool_phy_ops { int (*get_strings)(struct phy_device *dev, u8 *data); int (*get_stats)(struct phy_device *dev, struct ethtool_stats *stats, u64 *data); + int (*get_plca_cfg)(struct phy_device *dev, + struct phy_plca_cfg *plca_cfg); + int (*set_plca_cfg)(struct phy_device *dev, + const struct phy_plca_cfg *plca_cfg, + struct netlink_ext_ack *extack); + int (*get_plca_status)(struct phy_device *dev, + struct phy_plca_status *plca_st); int (*start_cable_test)(struct phy_device *phydev, struct netlink_ext_ack *extack); int (*start_cable_test_tdr)(struct phy_device *phydev, diff --git a/include/linux/phy.h b/include/linux/phy.h index 89b43cda5bda..b82fdb0d82ed 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -773,6 +773,63 @@ struct phy_tdr_config { }; #define PHY_PAIR_ALL -1 +/** + * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision + * Avoidance) Reconciliation Sublayer. + * + * @version: read-only PLCA register map version. -1 = not available. Ignored + * when setting the configuration. Format is the same as reported by the PLCA + * IDVER register (31.CA00). -1 = not available. + * @enabled: PLCA configured mode (enabled/disabled). -1 = not available / don't + * set. 0 = disabled, anything else = enabled. + * @node_id: the PLCA local node identifier. -1 = not available / don't set. + * Allowed values [0 .. 254]. 255 = node disabled. + * @node_cnt: the PLCA node count (maximum number of nodes having a TO). Only + * meaningful for the coordinator (node_id = 0). -1 = not available / don't + * set. Allowed values [1 .. 255]. + * @to_tmr: The value of the PLCA to_timer in bit-times, which determines the + * PLCA transmit opportunity window opening. See IEEE802.3 Clause 148 for + * more details. The to_timer shall be set equal over all nodes. + * -1 = not available / don't set. Allowed values [0 .. 255]. + * @burst_cnt: controls how many additional frames a node is allowed to send in + * single transmit opportunity (TO). The default value of 0 means that the + * node is allowed exactly one frame per TO. A value of 1 allows two frames + * per TO, and so on. -1 = not available / don't set. + * Allowed values [0 .. 255]. + * @burst_tmr: controls how many bit times to wait for the MAC to send a new + * frame before interrupting the burst. This value should be set to a value + * greater than the MAC inter-packet gap (which is typically 96 bits). + * -1 = not available / don't set. Allowed values [0 .. 255]. + * + * A structure containing configuration parameters for setting/getting the PLCA + * RS configuration. The driver does not need to implement all the parameters, + * but should report what is actually used. + */ +struct phy_plca_cfg { + int version; + int enabled; + int node_id; + int node_cnt; + int to_tmr; + int burst_cnt; + int burst_tmr; +}; + +/** + * struct phy_plca_status - Status of the PLCA (Physical Layer Collision + * Avoidance) Reconciliation Sublayer. + * + * @pst: The PLCA status as reported by the PST bit in the PLCA STATUS + * register(31.CA03), indicating BEACON activity. + * + * A structure containing status information of the PLCA RS configuration. + * The driver does not need to implement all the parameters, but should report + * what is actually used. + */ +struct phy_plca_status { + bool pst; +}; + /** * struct phy_driver - Driver structure for a particular PHY type * -- cgit v1.2.3 From 16178c8ef53dc9734302c4c07633696454579ee3 Mon Sep 17 00:00:00 2001 From: Piergiorgio Beruto Date: Mon, 9 Jan 2023 17:59:58 +0100 Subject: drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S Ethernet PHY. According to the specifications, the 10BASE-T1S supports Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations. Signed-off-by: Piergiorgio Beruto Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- include/linux/phy.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index b82fdb0d82ed..63b199f574f7 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -45,6 +45,7 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init; +extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1s_p2mp_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init; @@ -54,6 +55,7 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_ini #define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features) #define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features) +#define PHY_BASIC_T1S_P2MP_FEATURES ((unsigned long *)&phy_basic_t1s_p2mp_features) #define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features) #define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features) #define PHY_GBIT_ALL_PORTS_FEATURES ((unsigned long *)&phy_gbit_all_ports_features) @@ -66,6 +68,7 @@ extern const int phy_fibre_port_array[1]; extern const int phy_all_ports_features_array[7]; extern const int phy_10_100_features_array[4]; extern const int phy_basic_t1_features_array[3]; +extern const int phy_basic_t1s_p2mp_features_array[2]; extern const int phy_gbit_features_array[2]; extern const int phy_10gbit_features_array[1]; @@ -1041,6 +1044,17 @@ struct phy_driver { int (*get_sqi)(struct phy_device *dev); /** @get_sqi_max: Get the maximum signal quality indication */ int (*get_sqi_max)(struct phy_device *dev); + + /* PLCA RS interface */ + /** @get_plca_cfg: Return the current PLCA configuration */ + int (*get_plca_cfg)(struct phy_device *dev, + struct phy_plca_cfg *plca_cfg); + /** @set_plca_cfg: Set the PLCA configuration */ + int (*set_plca_cfg)(struct phy_device *dev, + const struct phy_plca_cfg *plca_cfg); + /** @get_plca_status: Return the current PLCA status info */ + int (*get_plca_status)(struct phy_device *dev, + struct phy_plca_status *plca_st); }; #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ struct phy_driver, mdiodrv) -- cgit v1.2.3 From a23a1e57a6770a8fad1c6362dfe73bd9f27e430c Mon Sep 17 00:00:00 2001 From: Piergiorgio Beruto Date: Mon, 9 Jan 2023 18:00:10 +0100 Subject: drivers/net/phy: add connection between ethtool and phylib for PLCA This patch adds the required connection between netlink ethtool and phylib to resolve PLCA get/set config and get status messages. Signed-off-by: Piergiorgio Beruto Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- include/linux/phy.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index 63b199f574f7..7c2ec1650975 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1851,6 +1851,13 @@ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data); int phy_ethtool_get_sset_count(struct phy_device *phydev); int phy_ethtool_get_stats(struct phy_device *phydev, struct ethtool_stats *stats, u64 *data); +int phy_ethtool_get_plca_cfg(struct phy_device *phydev, + struct phy_plca_cfg *plca_cfg); +int phy_ethtool_set_plca_cfg(struct phy_device *phydev, + const struct phy_plca_cfg *plca_cfg, + struct netlink_ext_ack *extack); +int phy_ethtool_get_plca_status(struct phy_device *phydev, + struct phy_plca_status *plca_st); static inline int phy_package_read(struct phy_device *phydev, u32 regnum) { -- cgit v1.2.3 From 493323416fed6b1ec6128a65c00e5f01d38b7e17 Mon Sep 17 00:00:00 2001 From: Piergiorgio Beruto Date: Mon, 9 Jan 2023 18:00:23 +0100 Subject: drivers/net/phy: add helpers to get/set PLCA configuration This patch adds support in phylib to read/write PLCA configuration for Ethernet PHYs that support the OPEN Alliance "10BASE-T1S PLCA Management Registers" specifications. These can be found at https://www.opensig.org/about/specifications/ Signed-off-by: Piergiorgio Beruto Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- include/linux/phy.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index 7c2ec1650975..b3cf1e08e880 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1753,6 +1753,12 @@ int genphy_c45_loopback(struct phy_device *phydev, bool enable); int genphy_c45_pma_resume(struct phy_device *phydev); int genphy_c45_pma_suspend(struct phy_device *phydev); int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable); +int genphy_c45_plca_get_cfg(struct phy_device *phydev, + struct phy_plca_cfg *plca_cfg); +int genphy_c45_plca_set_cfg(struct phy_device *phydev, + const struct phy_plca_cfg *plca_cfg); +int genphy_c45_plca_get_status(struct phy_device *phydev, + struct phy_plca_status *plca_st); /* Generic C45 PHY driver */ extern struct phy_driver genphy_c45_driver; -- cgit v1.2.3