From 23cde4d65cc7d11e2048d2b240cdf13927ac50d0 Mon Sep 17 00:00:00 2001 From: Denis CIOCCA Date: Wed, 19 Jun 2013 09:28:00 +0100 Subject: iio: Added ST-sensors platform data to select the DRDY interrupt pin This patch add support to redirect the DRDY interrupt on INT1 or INT2 on accelerometer and pressure sensors. Signed-off-by: Denis Ciocca Signed-off-by: Jonathan Cameron --- include/linux/iio/common/st_sensors.h | 14 +++++++++++--- include/linux/platform_data/st_sensors_pdata.h | 24 ++++++++++++++++++++++++ 2 files changed, 35 insertions(+), 3 deletions(-) create mode 100644 include/linux/platform_data/st_sensors_pdata.h (limited to 'include/linux') diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 72b26940730d..e51f65480ea5 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -17,6 +17,8 @@ #include #include +#include + #define ST_SENSORS_TX_MAX_LENGTH 2 #define ST_SENSORS_RX_MAX_LENGTH 6 @@ -118,14 +120,16 @@ struct st_sensor_bdu { /** * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt * @addr: address of the register. - * @mask: mask to write the on/off value. + * @mask_int1: mask to enable/disable IRQ on INT1 pin. + * @mask_int2: mask to enable/disable IRQ on INT2 pin. * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. */ struct st_sensor_data_ready_irq { u8 addr; - u8 mask; + u8 mask_int1; + u8 mask_int2; struct { u8 en_addr; u8 en_mask; @@ -201,6 +205,7 @@ struct st_sensors { * @buffer_data: Data used by buffer part. * @odr: Output data rate of the sensor [Hz]. * num_data_channels: Number of data channels used in buffer. + * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). * @get_irq_data_ready: Function to get the IRQ used for data ready signal. * @tf: Transfer function structure used by I/O operations. * @tb: Transfer buffers and mutex used by I/O operations. @@ -219,6 +224,8 @@ struct st_sensor_data { unsigned int odr; unsigned int num_data_channels; + u8 drdy_int_pin; + unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev); const struct st_sensor_transfer_function *tf; @@ -249,7 +256,8 @@ static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev) } #endif -int st_sensors_init_sensor(struct iio_dev *indio_dev); +int st_sensors_init_sensor(struct iio_dev *indio_dev, + struct st_sensors_platform_data *pdata); int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable); diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h new file mode 100644 index 000000000000..753839187ba0 --- /dev/null +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -0,0 +1,24 @@ +/* + * STMicroelectronics sensors platform-data driver + * + * Copyright 2013 STMicroelectronics Inc. + * + * Denis Ciocca + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_PDATA_H +#define ST_SENSORS_PDATA_H + +/** + * struct st_sensors_platform_data - Platform data for the ST sensors + * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). + * Available only for accelerometer and pressure sensors. + * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). + */ +struct st_sensors_platform_data { + u8 drdy_int_pin; +}; + +#endif /* ST_SENSORS_PDATA_H */ -- cgit v1.2.3 From 60b188f0d679656a1a2603d3bc1fa005373f4b9c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 16 Jul 2013 16:08:00 +0100 Subject: iio: Remove IIO_DEV_ATTR_RESET macro There are no users of this macro left and we have come to the conclusion that it is not a good idea to expose the raw chip reset to userspace so the macro is very unlikely to be used in new drivers. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/sysfs.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h index b7a934b9431b..2958c960003a 100644 --- a/include/linux/iio/sysfs.h +++ b/include/linux/iio/sysfs.h @@ -73,11 +73,6 @@ struct iio_const_attr { .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)} /* Generic attributes of onetype or another */ -/** - * IIO_DEV_ATTR_RESET: resets the device - **/ -#define IIO_DEV_ATTR_RESET(_store) \ - IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, _store, 0) /** * IIO_DEV_ATTR_SAMP_FREQ - sets any internal clock frequency -- cgit v1.2.3 From 9dabaf5eddbafa21aded7c063cb38d2e8936c237 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 18 Jul 2013 11:19:00 +0100 Subject: iio: core: implement devm_iio_device_alloc/devm_iio_device_free Add a resource managed devm_iio_device_alloc()/devm_iio_device_free() to automatically clean up any allocations made by IIO drivers, thus leading to simplified IIO drivers code. In addition, this will allow IIO drivers to use other devm_*() API (like devm_request_irq) and don't care about the race between iio_device_free() and the release of resources by Device core during driver removing. Signed-off-by: Grygorii Strashko Signed-off-by: Oleksandr Kravchenko Tested-by: Oleksandr Kravchenko Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 3d35b7023591..61d220f89aca 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -531,6 +531,31 @@ static inline struct iio_dev *iio_priv_to_dev(void *priv) **/ void iio_device_free(struct iio_dev *indio_dev); +/** + * devm_iio_device_alloc - Resource-managed iio_device_alloc() + * @dev: Device to allocate iio_dev for + * @sizeof_priv: Space to allocate for private structure. + * + * Managed iio_device_alloc. iio_dev allocated with this function is + * automatically freed on driver detach. + * + * If an iio_dev allocated with this function needs to be freed separately, + * devm_iio_device_free() must be used. + * + * RETURNS: + * Pointer to allocated iio_dev on success, NULL on failure. + */ +struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv); + +/** + * devm_iio_device_free - Resource-managed iio_device_free() + * @dev: Device this iio_dev belongs to + * @indio_dev: the iio_dev associated with the device + * + * Free indio_dev allocated with devm_iio_device_alloc(). + */ +void devm_iio_device_free(struct device *dev, struct iio_dev *iio_dev); + /** * iio_buffer_enabled() - helper function to test if the buffer is enabled * @indio_dev: IIO device structure for device -- cgit v1.2.3 From 9bc541028b2b93962e0bebce62ce6e295aab2086 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 29 Jul 2013 22:35:00 +0100 Subject: iio: Fix documentation of devm_iio_device_free() Signed-off-by: Peter Meerwald Cc: Grygorii Strashko Cc: Oleksandr Kravchenko Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 61d220f89aca..09ebe0a4d8e6 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -552,9 +552,9 @@ struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv); * @dev: Device this iio_dev belongs to * @indio_dev: the iio_dev associated with the device * - * Free indio_dev allocated with devm_iio_device_alloc(). + * Free iio_dev allocated with devm_iio_device_alloc(). */ -void devm_iio_device_free(struct device *dev, struct iio_dev *iio_dev); +void devm_iio_device_free(struct device *dev, struct iio_dev *indio_dev); /** * iio_buffer_enabled() - helper function to test if the buffer is enabled -- cgit v1.2.3 From 98d4f93c79b002f85480320fe63fefaa31d58b6c Mon Sep 17 00:00:00 2001 From: Jens Frederich Date: Thu, 15 Aug 2013 21:34:55 +0200 Subject: Staging: olpc_dcon: replace some magic numbers This patch replace some magic numbers. I believe it makes the driver more readable. The magic number 0x26 is the XO system embedded controller (EC) command 'DCON power enable/disable'. Number 0x41, and 0x42 are special memory controller settings register. The 0x41 initialize bit sequence 0x101 means: enable memory power down function and special SDRAM clock delay for synchronize SDRAM output and clock signal. The 0x42 initialize squence 0x101 is wrong. According to the specification Bit 8 is reserved, thus not in use. I removed it. Signed-off-by: Jens Frederich Signed-off-by: Greg Kroah-Hartman --- include/linux/olpc-ec.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/olpc-ec.h b/include/linux/olpc-ec.h index 5bb6e760aa61..2925df3ce78a 100644 --- a/include/linux/olpc-ec.h +++ b/include/linux/olpc-ec.h @@ -6,6 +6,7 @@ #define EC_WRITE_SCI_MASK 0x1b #define EC_WAKE_UP_WLAN 0x24 #define EC_WLAN_LEAVE_RESET 0x25 +#define EC_DCON_POWER_MODE 0x26 #define EC_READ_EB_MODE 0x2a #define EC_SET_SCI_INHIBIT 0x32 #define EC_SET_SCI_INHIBIT_RELEASE 0x34 -- cgit v1.2.3 From d536321df392ee0db6a5e92d98f0303020315f40 Mon Sep 17 00:00:00 2001 From: Jacek Anaszewski Date: Fri, 16 Aug 2013 14:11:00 +0100 Subject: iio: trigger: implement devm_iio_trigger_alloc/devm_iio_triger_free Add a resource managed devm_iio_trigger_alloc()/devm_iio_triger_free() to automatically clean up triggers allocated by IIO drivers, thus leading to simplified IIO drivers code. Signed-off-by: Jacek Anaszewski Signed-off-by: Kyunmin Park Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 09ebe0a4d8e6..2103cc32a5fb 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -556,6 +556,35 @@ struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv); */ void devm_iio_device_free(struct device *dev, struct iio_dev *indio_dev); +/** + * devm_iio_trigger_alloc - Resource-managed iio_trigger_alloc() + * @dev: Device to allocate iio_trigger for + * @fmt: trigger name format. If it includes format + * specifiers, the additional arguments following + * format are formatted and inserted in the resulting + * string replacing their respective specifiers. + * + * Managed iio_trigger_alloc. iio_trigger allocated with this function is + * automatically freed on driver detach. + * + * If an iio_trigger allocated with this function needs to be freed separately, + * devm_iio_trigger_free() must be used. + * + * RETURNS: + * Pointer to allocated iio_trigger on success, NULL on failure. + */ +struct iio_trigger *devm_iio_trigger_alloc(struct device *dev, + const char *fmt, ...); + +/** + * devm_iio_trigger_free - Resource-managed iio_trigger_free() + * @dev: Device this iio_dev belongs to + * @iio_trig: the iio_trigger associated with the device + * + * Free iio_trigger allocated with devm_iio_trigger_alloc(). + */ +void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig); + /** * iio_buffer_enabled() - helper function to test if the buffer is enabled * @indio_dev: IIO device structure for device -- cgit v1.2.3 From 9120c0bea999cc26c3493486828d34138a7ac901 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Tue, 27 Aug 2013 12:28:00 +0100 Subject: iio: at91: Use different prescal, startup mask in MR for different IP For at91 boards, there are different IPs for adc. Different IPs has different STARTUP & PRESCAL mask in ADC_MR. Signed-off-by: Josh Wu Acked-by: Maxime Ripard Signed-off-by: Jonathan Cameron --- include/linux/platform_data/at91_adc.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h index e15745b4f3a5..b3ca1e94e0c8 100644 --- a/include/linux/platform_data/at91_adc.h +++ b/include/linux/platform_data/at91_adc.h @@ -14,12 +14,16 @@ (Interruptions registers mostly) * @status_register: Offset of the Interrupt Status Register * @trigger_register: Offset of the Trigger setup register + * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register + * @mr_startup_mask: Mask of the STARTUP field in the adc MR register */ struct at91_adc_reg_desc { u8 channel_base; u32 drdy_mask; u8 status_register; u8 trigger_register; + u32 mr_prescal_mask; + u32 mr_startup_mask; }; /** -- cgit v1.2.3