From 867621ba203027338b525af6729719c544135336 Mon Sep 17 00:00:00 2001 From: Md Sadre Alam Date: Mon, 15 Jun 2026 11:39:08 +0530 Subject: dmaengine: qcom: bam_dma: Fix command element mask field for BAM v1.6.0+ BAM version 1.6.0 and later changed the behavior of the mask field in command elements for read operations. In older BAM versions, or prior implementation assumptions, the mask field was effectively ignored for read commands. However, starting from BAM v1.6.0, the mask field for read commands is repurposed to carry the upper 4 bits of the destination address, enabling support for 36-bit addressing. For write commands, the mask field continues to function as a traditional write mask. The current driver sets mask = 0xffffffff for all command elements. While this works for write operations, it breaks read operations on BAM v1.6.0+ hardware. In such cases, the hardware interprets the upper address bits as 0xf, resulting in an invalid destination address (0xf_xxxxxxxx instead of 0x0_xxxxxxxx). This leads to failures such as NAND enumeration issues observed on platforms like IPQ5424. Fix this by assigning the mask field based on command type: - For read commands: set mask = 0 (upper address bits = 0) - For write commands: retain mask = 0xffffffff Also update the bam_cmd_element structure documentation to reflect the dual purpose of the mask field across BAM versions. This ensures correct behavior on BAM v1.6.0+ while maintaining backward compatibility with older hardware. Fixes: dfebb055f73a2 ("dmaengine: qcom: bam_dma: wrapper functions for command descriptor") Tested-by: Lakshmi Sowjanya D Signed-off-by: Md Sadre Alam Reviewed-by: Frank Li Reviewed-by: Dmitry Baryshkov Cc: stable@vger.kernel.org Signed-off-by: Varadarajan Narayanan Link: https://patch.msgid.link/20260615060908.1263171-1-varadarajan.narayanan@oss.qualcomm.com Signed-off-by: Vinod Koul --- include/linux/dma/qcom_bam_dma.h | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dma/qcom_bam_dma.h b/include/linux/dma/qcom_bam_dma.h index 68fc0e643b1b..d9d07a9ab313 100644 --- a/include/linux/dma/qcom_bam_dma.h +++ b/include/linux/dma/qcom_bam_dma.h @@ -13,9 +13,12 @@ * supported by BAM DMA Engine. * * @cmd_and_addr - upper 8 bits command and lower 24 bits register address. - * @data - for write command: content to be written into peripheral register. - * for read command: dest addr to write peripheral register value. - * @mask - register mask. + * @data - For write command: content to be written into peripheral register. + * For read command: lower 32 bits of destination address. + * @mask - For write command: register write mask. + * For read command on BAM v1.6.0+: upper 4 bits of destination address. + * For read command on BAM < v1.6.0: ignored by hardware. + * Setting to 0 ensures 32-bit addressing compatibility. * @reserved - for future usage. * */ @@ -42,6 +45,10 @@ enum bam_command_type { * @addr: target address * @cmd: BAM command * @data: actual data for write and dest addr for read in le32 + * + * For BAM v1.6.0+, the mask field behavior depends on command type: + * - Write commands: mask = write mask (typically 0xffffffff) + * - Read commands: mask = upper 4 bits of destination address (0 for 32-bit) */ static inline void bam_prep_ce_le32(struct bam_cmd_element *bam_ce, u32 addr, @@ -50,7 +57,11 @@ bam_prep_ce_le32(struct bam_cmd_element *bam_ce, u32 addr, bam_ce->cmd_and_addr = cpu_to_le32((addr & 0xffffff) | ((cmd & 0xff) << 24)); bam_ce->data = data; - bam_ce->mask = cpu_to_le32(0xffffffff); + if (cmd == BAM_READ_COMMAND) + bam_ce->mask = cpu_to_le32(0x0); /* 32-bit addressing */ + else + bam_ce->mask = cpu_to_le32(0xffffffff); /* Write mask */ + bam_ce->reserved = 0; } /* @@ -60,7 +71,7 @@ bam_prep_ce_le32(struct bam_cmd_element *bam_ce, u32 addr, * @bam_ce: BAM command element * @addr: target address * @cmd: BAM command - * @data: actual data for write and dest addr for read + * @data: actual data for write and destination address for read */ static inline void bam_prep_ce(struct bam_cmd_element *bam_ce, u32 addr, -- cgit v1.2.3 From de4660898b7aa7e03d3b120a6bfa6b26211e4e77 Mon Sep 17 00:00:00 2001 From: Qi Zheng Date: Fri, 10 Jul 2026 23:43:18 +0800 Subject: mm: mglru: fix stale batch updates after memcg reparenting The mglru page table walker batches per-generation size deltas in walk->nr_pages while walking page tables without holding the lruvec lock. The reset_batch_size() later folds those deltas into walk->lruvec under the lruvec lock. The page table walker can run concurrently with the memcg reparenting path as follows: CPU0 CPU1 ==== ==== walk_mm --> walk_page_range --> update_batch_size --> walk->nr_pages += delta mem_cgroup_css_offline --> memcg_reparent_objcgs --> lock lruvec lru_gen_reparent_memcg --> reparent child folios to parent unlock lruvec lock lruvec reset_batch_size --> child lrugen->nr_pages += delta This will trigger the following warning in lru_gen_exit_memcg(): VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0, sizeof(lruvec->lrugen.nr_pages))); And the user-visible impact of underestimated nr_pages in MGLRU was premature OOMs because MGLRU does not try to reclaim memory when nr_pages reaches zero, but there are still more pages. To fix it, make reset_batch_size() check CSS_DYING under RCU before flushing the pending batch. A non-dying memcg keeps the original lruvec stable against RCU-delayed offlining; a dying memcg redirects the deltas to the first non-dying ancestor. Link: https://lore.kernel.org/20260710154318.75388-1-qi.zheng@linux.dev Fixes: f304652609ea ("mm: vmscan: prepare for reparenting MGLRU folios") Signed-off-by: Qi Zheng Reported-by: Peiyang He Closes: https://lore.kernel.org/all/5A9E929D82717101+12fcf643-efb8-4b9a-a53a-1e28cc894f0b@smail.nju.edu.cn Reviewed-by: Harry Yoo (Oracle) Acked-by: Johannes Weiner Acked-by: Shakeel Butt Cc: Axel Rasmussen Cc: Barry Song Cc: David Hildenbrand Cc: Kairui Song Cc: Lorenzo Stoakes Cc: Michal Hocko Cc: Muchun Song Cc: Roman Gushchin Cc: Wei Xu Cc: Yuanchu Xie Cc: Signed-off-by: Andrew Morton --- include/linux/memcontrol.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index e1f46a0016fc..957260677678 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -1472,6 +1472,31 @@ static inline void lruvec_lock_irq(struct lruvec *lruvec) spin_lock_irq(&lruvec->lru_lock); } +static inline struct lruvec *lruvec_live_lock_irq(struct lruvec *lruvec) +{ +#ifdef CONFIG_MEMCG + struct pglist_data *pgdat = lruvec_pgdat(lruvec); + struct mem_cgroup *memcg = lruvec_memcg(lruvec); + + rcu_read_lock(); + + /* + * The memcg can be NULL when the memory controller is disabled. + * Otherwise, the caller keeps the memcg owning @lruvec alive. + */ + while (unlikely(memcg && css_is_dying(&memcg->css))) { + memcg = parent_mem_cgroup(memcg); + lruvec = mem_cgroup_lruvec(memcg, pgdat); + } + + spin_lock_irq(&lruvec->lru_lock); +#else + lruvec_lock_irq(lruvec); +#endif + + return lruvec; +} + static inline void lruvec_unlock(struct lruvec *lruvec) { spin_unlock(&lruvec->lru_lock); -- cgit v1.2.3 From db3d0e0e5d4bc5ab4fe445b9f413d1b486508ca5 Mon Sep 17 00:00:00 2001 From: Xiang Mei Date: Sun, 12 Jul 2026 16:42:01 -0700 Subject: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() sip_help_tcp() stores the size change of each NAT-rewritten SIP message in s16 diff and accumulates it in s16 tdiff, but a single message can grow by more than S16_MAX while the packet stays under the 65535 enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long Contact list expands the message by tens of kilobytes. diff then wraps, and "datalen = datalen + diff - msglen" yields a huge unsigned datalen, so the next iteration's ct_sip_get_header() reads past the linearized skb tail. Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the 65535 byte packet limit, and the seqadj core is already s32 (nf_ct_seqadj_set() takes s32), so no previously accepted input is rejected. BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25 ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694) nf_confirm (net/netfilter/nf_conntrack_proto.c:183) nf_hook_slow (net/netfilter/core.c:619) ip6_output (net/ipv6/ip6_output.c:246) ip6_forward (net/ipv6/ip6_output.c:690) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6212) process_backlog (net/core/dev.c:6676) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ... Fixes: f5b321bd37fb ("netfilter: nf_conntrack_sip: add TCP support") Reported-by: Weiming Shi Link: https://patch.msgid.link/netfilter-devel/20260712234201.3213635-1-xmei5@asu.edu Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nf_conntrack_sip.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h index dbc614dfe0d5..aafa0c04f917 100644 --- a/include/linux/netfilter/nf_conntrack_sip.h +++ b/include/linux/netfilter/nf_conntrack_sip.h @@ -115,7 +115,7 @@ struct nf_nat_sip_hooks { unsigned int *datalen); void (*seq_adjust)(struct sk_buff *skb, - unsigned int protoff, s16 off); + unsigned int protoff, s32 off); unsigned int (*expect)(struct sk_buff *skb, unsigned int protoff, -- cgit v1.2.3 From 738e6f32e61d80b554e37015ecb7bc620b88001c Mon Sep 17 00:00:00 2001 From: Peiyang He Date: Mon, 20 Jul 2026 16:50:16 +0800 Subject: iommu/iommufd: Fix IOPF group ownership UAF iopf_group_alloc() links each last-page IOPF group into the generic IOPF pending list before invoking the domain fault handler. iommufd_fault_iopf_handler() also queued an accepted group in the IOMMUFD deliver list without removing it from the generic pending list. When detach or HWPT replacement drops the device's IOPF reference count to zero, an IOMMU driver may call iopf_queue_remove_device(). That function responds to and frees groups through the generic pending list without removing the same groups from IOMMUFD's deliver list or response xarray. A later read, response, or cleanup can then access the freed group and cause a UAF. Fix this by dequeuing an accepted group from the generic pending list before IOMMUFD queues it for userspace response. Make iopf_group_response() send a response regardless of pending-list membership, so the dequeued group can still be completed by IOMMUFD. Link: https://patch.msgid.link/r/3CFD314D0FE4D7EC+20260720085017.3998878-2-peiyang_he@smail.nju.edu.cn Closes: https://lore.kernel.org/all/B4F28798E2E784CA+d29f723c-b2b5-4b67-8d1c-4f7b9b0b27cb@smail.nju.edu.cn/ Fixes: 34765cbc679c ("iommufd: Associate fault object with iommufd_hw_pgtable") Cc: stable@vger.kernel.org Tested-by: Peiyang He Assisted-by: Codex:gpt-5.6-sol Signed-off-by: Peiyang He Reviewed-by: Kevin Tian Signed-off-by: Jason Gunthorpe --- include/linux/iommu.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iommu.h b/include/linux/iommu.h index d20aa6f6863a..ac43b8b93f14 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -1704,6 +1704,7 @@ void iopf_free_group(struct iopf_group *group); int iommu_report_device_fault(struct device *dev, struct iopf_fault *evt); void iopf_group_response(struct iopf_group *group, enum iommu_page_response_code status); +void iopf_group_dequeue(struct iopf_group *group); #else static inline int iopf_queue_add_device(struct iopf_queue *queue, struct device *dev) @@ -1749,5 +1750,9 @@ static inline void iopf_group_response(struct iopf_group *group, enum iommu_page_response_code status) { } + +static inline void iopf_group_dequeue(struct iopf_group *group) +{ +} #endif /* CONFIG_IOMMU_IOPF */ #endif /* __LINUX_IOMMU_H */ -- cgit v1.2.3 From 97ac08560d236ca17f6606d9e671118e5eae5721 Mon Sep 17 00:00:00 2001 From: Eric Joyner Date: Wed, 22 Jul 2026 21:13:42 -0700 Subject: ethtool: Embed FEC hist ranges as buffer in struct When a driver's .get_fec_stats() handler is called and the driver supports FEC histogram stats, the driver supplies the histogram bin ranges via a pointer. This pointer is assigned while under the netdev ops lock in fec_prepare_data(), but the actual data is only read after the lock is released; so this allows the driver to change the ranges (e.g. from another .get_fec_stats() call) while the current call chain is reading them in fec_fill_reply(). Fix this by adding an ethtool core-owned buffer, ranges_buf, to struct ethtool_fec_hist. Drivers whose ranges are built dynamically (currently just mlx5) fill ranges_buf and then point the existing ranges pointer at it, giving ethtool a consistent copy that stays valid after the netdev ops lock is dropped and later in fec_fill_reply(). Drivers whose ranges are compile-time constants (bnxt, netdevsim) are unaffected by the potential race and keep setting the existing ranges pointer to their constant array, without making copies. Fixes: cc2f08129925 ("ethtool: add FEC bins histogram report") Signed-off-by: Eric Joyner Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20260723041342.39238-1-eric.joyner@amd.com Signed-off-by: Jakub Kicinski --- include/linux/ethtool.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 5d491a98265e..12683b5d125e 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -562,6 +562,7 @@ struct ethtool_fec_hist { u64 per_lane[ETHTOOL_MAX_LANES]; } values[ETHTOOL_FEC_HIST_MAX]; const struct ethtool_fec_hist_range *ranges; + struct ethtool_fec_hist_range ranges_buf[ETHTOOL_FEC_HIST_MAX]; }; /** * struct ethtool_fec_stats - statistics for IEEE 802.3 FEC -- cgit v1.2.3 From aec49a34d928a0ecdea85bd9f6b4114b668b68b8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 Jul 2026 18:52:09 -0700 Subject: ata: libata: avoid kernel-doc warnings Modify comments to prevent kernel-doc warnings: - use "/*" for a non-kernel-doc comment - add a Returns: section for ata_id_major_version() Warning: include/linux/ata.h:770 Cannot find identifier on line: * Warning: include/linux/ata.h:782 function parameter 'id' not described in 'ata_id_sct_data_tables' Warning: include/linux/ata.h:782 expecting prototype for Word(). Prototype was for ata_id_sct_data_tables() instead Warning: include/linux/ata.h:820 No description found for return value of 'ata_id_major_version' Signed-off-by: Randy Dunlap Signed-off-by: Damien Le Moal --- include/linux/ata.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 8fd48bcb2a46..7daad4cad985 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -762,8 +762,7 @@ static inline bool ata_id_sense_reporting_enabled(const u16 *id) return id[ATA_ID_COMMAND_SET_4] & BIT(6); } -/** - * +/* * Word: 206 - SCT Command Transport * 15:12 - Vendor Specific * 11:6 - Reserved @@ -810,8 +809,9 @@ static inline bool ata_id_sct_supported(const u16 *id) * * The practical impact of this is that ata_id_major_version cannot * reliably report on drives below ATA3. + * + * Returns: major version of ATA drive level or %0 if unknown */ - static inline unsigned int ata_id_major_version(const u16 *id) { unsigned int mver; -- cgit v1.2.3 From 1e024d2b41ee32bc06818f7f09a3562c58842cf9 Mon Sep 17 00:00:00 2001 From: Matt Vollrath Date: Fri, 24 Jul 2026 03:39:42 -0400 Subject: ata: libata-eh: Increase STANDBY IMMEDIATE timeout Correct a previous change (see Fixes) which reduced the standby timeout from 30 to 5 seconds. Increase it to 15 seconds. I was troubleshooting an error spotted during system suspend: [ 1217.152867] ata1.00: Entering standby power mode [ 1222.322948] ata1.00: qc timeout after 5000 msecs (cmd 0xe0) [ 1222.324010] ata1.00: STANDBY IMMEDIATE failed (err_mask=0x4) This drive is a Samsung 870 EVO SSD in good SMART standing, and I wasn't aware of any reason it should be taking so long to standby. The issue is intermittent, but I observed it sometimes taking 7 seconds to manually standby. I assume this was interruption of background maintenance after a power outage. As a desktop user, I would prefer to wait the extra 2 seconds at suspend to let the drive finish its business rather than drop the rails from under it. The change from 30 to 5 seconds was implicit when switching suspend from START STOP UNIT to an internal command with no timeout table entry. No reason was stated for the change. Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Cc: stable@vger.kernel.org Signed-off-by: Matt Vollrath Assisted-by: Claude:claude-5-fable Signed-off-by: Damien Le Moal --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 96e626d6a7ca..6c0d385b2cde 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -425,7 +425,7 @@ enum { /* This should match the actual table size of * ata_eh_cmd_timeout_table in libata-eh.c. */ - ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 8, + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 9, /* User visible DMA mask for DMA control. DO NOT renumber. */ ATA_DMA_MASK_ATA = (1 << 0), /* DMA on ATA Disk */ -- cgit v1.2.3 From 1d78d56c43ef3768183e8370e7367b162700e049 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 27 Jul 2026 14:07:15 +0100 Subject: netfs: Fix folio_queue ENOMEM in writeback by adding a mempool Fix the handling of folio_queue allocation failure in writeback by adding a mempool and passing in gfp_t flags to the rolling buffer functions that allocate memory, using the mempool if gfp != GFP_KERNEL. This is then extended upwards and the gfp to be used for a request is stored in the netfs_io_request struct and is then used for both requests and subrequests, eliminating the sleeping loops there. The failure caused: folio != NULL WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 Fixes: cd0277ed0c18 ("netfs: Use new folio_queue data type and iterator instead of xarray iter") Reported-by: syzbot+0da43efa72f88bd3a8af@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0da43efa72f88bd3a8af Signed-off-by: David Howells Link: https://patch.msgid.link/20260727130716.1099906-5-dhowells@redhat.com Tested-by: syzbot+0da43efa72f88bd3a8af@syzkaller.appspotmail.com cc: Paulo Alcantara cc: Yun Zhou cc: Matthew Wilcox cc: Christoph Hellwig cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) --- include/linux/netfs.h | 1 + include/linux/rolling_buffer.h | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfs.h b/include/linux/netfs.h index 1bc120d61c5b..d0b62d53eea9 100644 --- a/include/linux/netfs.h +++ b/include/linux/netfs.h @@ -255,6 +255,7 @@ struct netfs_io_request { unsigned long long cleaned_to; /* Position we've cleaned folios to */ unsigned long long abandon_to; /* Position to abandon folios to */ const struct folio *no_unlock_folio; /* Don't unlock this folio after read */ + gfp_t gfp; /* GFP flags to use */ unsigned int direct_bv_count; /* Number of elements in direct_bv[] */ unsigned int debug_id; unsigned int rsize; /* Maximum read size (0 for none) */ diff --git a/include/linux/rolling_buffer.h b/include/linux/rolling_buffer.h index ac15b1ffdd83..9e5dad29669c 100644 --- a/include/linux/rolling_buffer.h +++ b/include/linux/rolling_buffer.h @@ -43,13 +43,13 @@ struct rolling_buffer_snapshot { #define ROLLBUF_MARK_2 BIT(1) int rolling_buffer_init(struct rolling_buffer *roll, unsigned int rreq_id, - unsigned int direction); -int rolling_buffer_make_space(struct rolling_buffer *roll); + unsigned int direction, gfp_t gfp); +int rolling_buffer_make_space(struct rolling_buffer *roll, gfp_t gfp); ssize_t rolling_buffer_load_from_ra(struct rolling_buffer *roll, struct readahead_control *ractl, struct folio_batch *put_batch); ssize_t rolling_buffer_append(struct rolling_buffer *roll, struct folio *folio, - unsigned int flags); + unsigned int flags, gfp_t gfp); struct folio_queue *rolling_buffer_delete_spent(struct rolling_buffer *roll); void rolling_buffer_clear(struct rolling_buffer *roll); -- cgit v1.2.3 From 2e1d2e65e773d67dab163127f11a47dab0fbca9f Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 9 Jul 2026 10:01:33 +0900 Subject: ata: libata-scsi: terminate deferred commands on time out If a command times out while we have deferred non-NCQ commands waiting to be issued, the SCSI EH task is not immediately woken up as the waiting deferred commands are never issued nor completed, thus leaving the SCSI host in a busy state (shost->host_failed != scsi_host_busy(shost)) which prevents the SCSI EH task from being woken up. Eventually, when the deferred commands also time out, the SCSI EH task is woken up and the timeout processing occurs. Avoid this unnecessary SCSI EH task wake-up additional time by scheduling a retry of all waiting deferred QCs, using the eh_timed_out SCSI host template operation. The function ata_scsi_eh_timed_out() is introduced to implement this operation. However, terminating deferred commands with DID_REQUEUE to force a retry by calling the function ata_scsi_requeue_deferred_qc() may still keep the SCSI host in a busy state because the block layer may immediately re-issue these commands. The solution to this is to schedule libata EH for the port which suffered the command timeout to prevent accepting any new command. ata_scsi_requeue_deferred_qc() is modified to add a call to ata_port_schedule_eh() for this purpose. In addition to this change, ata_scsi_requeue_deferred_qc() is also modified to take a new timedout_scmd scsi command argument which indicates the SCSI command that timed out. With this additional argument, ata_scsi_requeue_deferred_qc() can now also terminate with DID_TIME_OUT any timed out deferred qc, which simplifies ata_scsi_cmd_error_handler(). In this case, ata_scsi_requeue_deferred_qc() returns SCSI_EH_DONE, with this return value propagated back to the ata_scsi_eh_timed_out() operation to indicate to scsi_timeout() that the timed out command was handled and no further processing is needed. For non-timed out deferred qc that need to be retried, ata_scsi_requeue_deferred_qc() returns SCSI_EH_NOT_HANDLED, thus indicating to scsi_timeout() that the timed out command needs to go through the SCSI EH (and libata EH) processing by adding it to the EH work queue with scsi_eh_scmd_add(). One side effect of these changes is that the function atapi_qc_complete() needs to be modified to ensure that a deferred ATAPI command that needs to be retried is completed with DID_REQUEUE instead of the default SAM_STAT_GOOD status, and a command that timed out is completed with DID_TIME_OUT instead of SAM_STAT_CHECK_CONDITION. Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Igor Pylypiv Tested-by: Igor Pylypiv Reviewed-by: Niklas Cassel Reviewed-by: Martin K. Petersen --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 6c0d385b2cde..f10b3287b507 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1153,6 +1153,7 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, #endif extern enum scsi_qc_status ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); +enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *cmd); #if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); #else @@ -1464,6 +1465,7 @@ extern const struct attribute_group *ata_common_sdev_groups[]; .ioctl = ata_scsi_ioctl, \ ATA_SCSI_COMPAT_IOCTL \ .queuecommand = ata_scsi_queuecmd, \ + .eh_timed_out = ata_scsi_eh_timed_out, \ .dma_need_drain = ata_scsi_dma_need_drain, \ .this_id = ATA_SHT_THIS_ID, \ .emulated = ATA_SHT_EMULATED, \ -- cgit v1.2.3 From de202d2251bc181c6019b1ad3c0ba8133e5ec68d Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 9 Jul 2026 16:02:23 +0900 Subject: scsi: libsas: terminate deferred commands on time out If a command times out while we have deferred non-NCQ commands waiting to be issued, the SCSI EH task is not immediately woken up as the waiting deferred commands are never issued nor completed, thus leaving the SCSI host in a busy state (shost->host_failed != scsi_host_busy(shost)) which prevents the SCSI EH task from being woken up. Eventually, when the deferred commands also time out, the SCSI EH task is woken up and the timeout processing occurs. Avoid this unnecessary additional SCSI EH wake up time with the same method as implemented in libata-scsi, using the eh_timed_out SCSI host template operation. The function sas_eh_timed_out() implements this operation and executes the function ata_scsi_retry_deferred_qc() for SATA devices. Co-developed-by: Igor Pylypiv Signed-off-by: Igor Pylypiv Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: John Garry Reviewed-by: Hannes Reinecke Tested-by: Igor Pylypiv Reviewed-by: Niklas Cassel Reviewed-by: Martin K. Petersen --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index f10b3287b507..1827502b9cf2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1153,6 +1153,8 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, #endif extern enum scsi_qc_status ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); +enum scsi_timeout_action ata_scsi_retry_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *scmd); enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *cmd); #if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); -- cgit v1.2.3 From 6bc85579c3bbb2f088cbac849c5dc2a134dda736 Mon Sep 17 00:00:00 2001 From: Simon Schippers Date: Tue, 28 Jul 2026 11:22:38 +0200 Subject: Revert "ptr_ring: move free-space check into separate helper" This reverts commit fba362c17d9d9211fc51f272156bb84fc23bdf98. __ptr_ring_check_produce() has no users left after reverting commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"). Signed-off-by: Simon Schippers Acked-by: Michael S. Tsirkin Link: https://patch.msgid.link/20260728092240.250257-3-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski --- include/linux/ptr_ring.h | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ptr_ring.h b/include/linux/ptr_ring.h index c95e891903f0..d2c3629bbe45 100644 --- a/include/linux/ptr_ring.h +++ b/include/linux/ptr_ring.h @@ -96,20 +96,6 @@ static inline bool ptr_ring_full_bh(struct ptr_ring *r) return ret; } -/* Note: callers invoking this in a loop must use a compiler barrier, - * for example cpu_relax(). Callers must hold producer_lock. - */ -static inline int __ptr_ring_check_produce(struct ptr_ring *r) -{ - if (unlikely(!r->size)) - return -EINVAL; - - if (data_race(r->queue[r->producer])) - return -ENOSPC; - - return 0; -} - /* Note: callers invoking this in a loop must use a compiler barrier, * for example cpu_relax(). Callers must hold producer_lock. * Callers are responsible for making sure pointer that is being queued @@ -117,10 +103,8 @@ static inline int __ptr_ring_check_produce(struct ptr_ring *r) */ static inline int __ptr_ring_produce(struct ptr_ring *r, void *ptr) { - int p = __ptr_ring_check_produce(r); - - if (p) - return p; + if (unlikely(!r->size) || data_race(r->queue[r->producer])) + return -ENOSPC; /* Make sure the pointer we are storing points to a valid data. */ /* Pairs with the dependency ordering in __ptr_ring_consume. */ -- cgit v1.2.3 From 8f83be72d9f5ef16c4a908450d0d993e8ec99d34 Mon Sep 17 00:00:00 2001 From: Simon Schippers Date: Tue, 28 Jul 2026 11:22:39 +0200 Subject: Revert "vhost-net: wake queue of tun/tap after ptr_ring consume" This reverts commit baf808fe4fcd35767ab732b4ab2ea80dabfd97a6. There is no netdev queue left to wake after reverting commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"). Signed-off-by: Simon Schippers Acked-by: Michael S. Tsirkin Link: https://patch.msgid.link/20260728092240.250257-4-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski --- include/linux/if_tun.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 5f3e206c7a73..80166eb62f41 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -22,7 +22,6 @@ struct tun_msg_ctl { #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE) struct socket *tun_get_socket(struct file *); struct ptr_ring *tun_get_tx_ring(struct file *file); -void tun_wake_queue(struct file *file, int consumed); static inline bool tun_is_xdp_frame(void *ptr) { @@ -56,8 +55,6 @@ static inline struct ptr_ring *tun_get_tx_ring(struct file *f) return ERR_PTR(-EINVAL); } -static inline void tun_wake_queue(struct file *f, int consumed) {} - static inline bool tun_is_xdp_frame(void *ptr) { return false; -- cgit v1.2.3