From 7863406143d8bbbbda07a61285c5f4c217908dfd Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 27 Oct 2017 04:42:28 +0200 Subject: sched/isolation: Move housekeeping related code to its own file The housekeeping code is currently tied to the NOHZ code. As we are planning to make housekeeping independent from it, start with moving the relevant code to its own file. Signed-off-by: Frederic Weisbecker Acked-by: Thomas Gleixner Acked-by: Paul E. McKenney Cc: Chris Metcalf Cc: Christoph Lameter Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Rik van Riel Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1509072159-31808-2-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar --- include/linux/tick.h | 37 ------------------------------------- 1 file changed, 37 deletions(-) (limited to 'include/linux/tick.h') diff --git a/include/linux/tick.h b/include/linux/tick.h index fe01e68bf520..68afc09aa8ac 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -137,7 +137,6 @@ static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; } #ifdef CONFIG_NO_HZ_FULL extern bool tick_nohz_full_running; extern cpumask_var_t tick_nohz_full_mask; -extern cpumask_var_t housekeeping_mask; static inline bool tick_nohz_full_enabled(void) { @@ -161,11 +160,6 @@ static inline void tick_nohz_full_add_cpus_to(struct cpumask *mask) cpumask_or(mask, mask, tick_nohz_full_mask); } -static inline int housekeeping_any_cpu(void) -{ - return cpumask_any_and(housekeeping_mask, cpu_online_mask); -} - extern void tick_nohz_dep_set(enum tick_dep_bits bit); extern void tick_nohz_dep_clear(enum tick_dep_bits bit); extern void tick_nohz_dep_set_cpu(int cpu, enum tick_dep_bits bit); @@ -235,10 +229,6 @@ static inline void tick_dep_clear_signal(struct signal_struct *signal, extern void tick_nohz_full_kick_cpu(int cpu); extern void __tick_nohz_task_switch(void); #else -static inline int housekeeping_any_cpu(void) -{ - return smp_processor_id(); -} static inline bool tick_nohz_full_enabled(void) { return false; } static inline bool tick_nohz_full_cpu(int cpu) { return false; } static inline void tick_nohz_full_add_cpus_to(struct cpumask *mask) { } @@ -260,33 +250,6 @@ static inline void tick_nohz_full_kick_cpu(int cpu) { } static inline void __tick_nohz_task_switch(void) { } #endif -static inline const struct cpumask *housekeeping_cpumask(void) -{ -#ifdef CONFIG_NO_HZ_FULL - if (tick_nohz_full_enabled()) - return housekeeping_mask; -#endif - return cpu_possible_mask; -} - -static inline bool is_housekeeping_cpu(int cpu) -{ -#ifdef CONFIG_NO_HZ_FULL - if (tick_nohz_full_enabled()) - return cpumask_test_cpu(cpu, housekeeping_mask); -#endif - return true; -} - -static inline void housekeeping_affine(struct task_struct *t) -{ -#ifdef CONFIG_NO_HZ_FULL - if (tick_nohz_full_enabled()) - set_cpus_allowed_ptr(t, housekeeping_mask); - -#endif -} - static inline void tick_nohz_task_switch(void) { if (tick_nohz_full_enabled()) -- cgit v1.2.3 From 6f1982fedd59856bcc42a9b521be4c3ffd2f60a7 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 27 Oct 2017 04:42:36 +0200 Subject: sched/isolation: Handle the nohz_full= parameter We want to centralize the isolation management, done by the housekeeping subsystem. Therefore we need to handle the nohz_full= parameter from there. Since nohz_full= so far has involved unbound timers, watchdog, RCU and tilegx NAPI isolation, we keep that default behaviour. nohz_full= will be deprecated in the future. We want to control the isolation features from the isolcpus= parameter. Signed-off-by: Frederic Weisbecker Acked-by: Thomas Gleixner Cc: Chris Metcalf Cc: Christoph Lameter Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rik van Riel Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1509072159-31808-10-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar --- include/linux/tick.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/tick.h') diff --git a/include/linux/tick.h b/include/linux/tick.h index 68afc09aa8ac..e2a163a9f96c 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -228,6 +228,7 @@ static inline void tick_dep_clear_signal(struct signal_struct *signal, extern void tick_nohz_full_kick_cpu(int cpu); extern void __tick_nohz_task_switch(void); +extern void __init tick_nohz_full_setup(cpumask_var_t cpumask); #else static inline bool tick_nohz_full_enabled(void) { return false; } static inline bool tick_nohz_full_cpu(int cpu) { return false; } @@ -248,6 +249,7 @@ static inline void tick_dep_clear_signal(struct signal_struct *signal, static inline void tick_nohz_full_kick_cpu(int cpu) { } static inline void __tick_nohz_task_switch(void) { } +static inline void tick_nohz_full_setup(cpumask_var_t cpumask) { } #endif static inline void tick_nohz_task_switch(void) -- cgit v1.2.3 From b24413180f5600bcb3bb70fbed5cf186b60864bd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 1 Nov 2017 15:07:57 +0100 Subject: License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman --- include/linux/tick.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/tick.h') diff --git a/include/linux/tick.h b/include/linux/tick.h index fe01e68bf520..cf413b344ddb 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Tick related global functions */ -- cgit v1.2.3