From bb29b9cccd95feeb43e11e9b1c2479777082e28a Mon Sep 17 00:00:00 2001 From: Anders Darander Date: Thu, 27 Apr 2017 08:37:33 +0200 Subject: leds: pca963x: Add bindings to invert polarity Add a new DT property, nxp,inverted-out, to invert the polarity of the output. Tested on PCA9634. Signed-off-by: Anders Darander Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski --- include/linux/platform_data/leds-pca963x.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/leds-pca963x.h b/include/linux/platform_data/leds-pca963x.h index e731f0036329..54e845ffb5ed 100644 --- a/include/linux/platform_data/leds-pca963x.h +++ b/include/linux/platform_data/leds-pca963x.h @@ -33,10 +33,16 @@ enum pca963x_blink_type { PCA963X_HW_BLINK, }; +enum pca963x_direction { + PCA963X_NORMAL, + PCA963X_INVERTED, +}; + struct pca963x_platform_data { struct led_platform_data leds; enum pca963x_outdrv outdrv; enum pca963x_blink_type blink_type; + enum pca963x_direction dir; }; #endif /* __LINUX_PCA963X_H*/ -- cgit v1.2.3 From 91b9ae48aadd7e634161372b0bc3ffc88a050e8b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 22:30:33 +0200 Subject: HID: i2c-hid: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- include/linux/platform_data/i2c-hid.h | 42 +++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 include/linux/platform_data/i2c-hid.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h new file mode 100644 index 000000000000..1fb088239d12 --- /dev/null +++ b/include/linux/platform_data/i2c-hid.h @@ -0,0 +1,42 @@ +/* + * HID over I2C protocol implementation + * + * Copyright (c) 2012 Benjamin Tissoires + * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef __LINUX_I2C_HID_H +#define __LINUX_I2C_HID_H + +#include + +struct regulator; + +/** + * struct i2chid_platform_data - used by hid over i2c implementation. + * @hid_descriptor_address: i2c register where the HID descriptor is stored. + * @supply: regulator for powering on the device. + * @post_power_delay_ms: delay after powering on before device is usable. + * + * Note that it is the responsibility of the platform driver (or the acpi 5.0 + * driver, or the flattened device tree) to setup the irq related to the gpio in + * the struct i2c_board_info. + * The platform driver should also setup the gpio according to the device: + * + * A typical example is the following: + * irq = gpio_to_irq(intr_gpio); + * hkdk4412_i2c_devs5[0].irq = irq; // store the irq in i2c_board_info + * gpio_request(intr_gpio, "elan-irq"); + * s3c_gpio_setpull(intr_gpio, S3C_GPIO_PULL_UP); + */ +struct i2c_hid_platform_data { + u16 hid_descriptor_address; + struct regulator *supply; + int post_power_delay_ms; +}; + +#endif /* __LINUX_I2C_HID_H */ -- cgit v1.2.3 From f81126b0b67c864b0b3d614d8adadc3a37ba5209 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 22 May 2017 16:24:22 -0700 Subject: Input: lm8323 - move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/lm8323.h | 46 ++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 include/linux/platform_data/lm8323.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/lm8323.h b/include/linux/platform_data/lm8323.h new file mode 100644 index 000000000000..478d668bc590 --- /dev/null +++ b/include/linux/platform_data/lm8323.h @@ -0,0 +1,46 @@ +/* + * lm8323.h - Configuration for LM8323 keypad driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation (version 2 of the License only). + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_LM8323_H +#define __LINUX_LM8323_H + +#include + +/* + * Largest keycode that the chip can send, plus one, + * so keys can be mapped directly at the index of the + * LM8323 keycode instead of subtracting one. + */ +#define LM8323_KEYMAP_SIZE (0x7f + 1) + +#define LM8323_NUM_PWMS 3 + +struct lm8323_platform_data { + int debounce_time; /* Time to watch for key bouncing, in ms. */ + int active_time; /* Idle time until sleep, in ms. */ + + int size_x; + int size_y; + bool repeat; + const unsigned short *keymap; + + const char *pwm_names[LM8323_NUM_PWMS]; + + const char *name; /* Device name. */ +}; + +#endif /* __LINUX_LM8323_H */ -- cgit v1.2.3 From 8cd9ab9e19b8cf23a7cae503af81ae70154e7956 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 22 May 2017 16:26:56 -0700 Subject: Input: mcs - move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/mcs.h | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 include/linux/platform_data/mcs.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mcs.h b/include/linux/platform_data/mcs.h new file mode 100644 index 000000000000..61bb18a4fd3c --- /dev/null +++ b/include/linux/platform_data/mcs.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * Author: HeungJun Kim + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MCS_H +#define __LINUX_MCS_H + +#define MCS_KEY_MAP(v, c) ((((v) & 0xff) << 16) | ((c) & 0xffff)) +#define MCS_KEY_VAL(v) (((v) >> 16) & 0xff) +#define MCS_KEY_CODE(v) ((v) & 0xffff) + +struct mcs_platform_data { + void (*poweron)(bool); + void (*cfg_pin)(void); + + /* touchscreen */ + unsigned int x_size; + unsigned int y_size; + + /* touchkey */ + const u32 *keymap; + unsigned int keymap_size; + unsigned int key_maxval; + bool no_autorepeat; +}; + +#endif /* __LINUX_MCS_H */ -- cgit v1.2.3 From 0d846a4cbbcbf81e527542d15e165b8f774bace5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 22 May 2017 16:28:42 -0700 Subject: Input: mms114 - move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/mms114.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/platform_data/mms114.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mms114.h b/include/linux/platform_data/mms114.h new file mode 100644 index 000000000000..5722ebfb2738 --- /dev/null +++ b/include/linux/platform_data/mms114.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundationr + */ + +#ifndef __LINUX_MMS114_H +#define __LINUX_MMS114_H + +struct mms114_platform_data { + unsigned int x_size; + unsigned int y_size; + unsigned int contact_threshold; + unsigned int moving_threshold; + bool x_invert; + bool y_invert; + + void (*cfg_pin)(bool); +}; + +#endif /* __LINUX_MMS114_H */ -- cgit v1.2.3 From 8fd708157a592a376c4d0b3b2ba23b9e9f79caa5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 22 May 2017 16:30:04 -0700 Subject: Input: tsc2007 - move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Acked-by: Lee Jones Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/tsc2007.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/platform_data/tsc2007.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/tsc2007.h b/include/linux/platform_data/tsc2007.h new file mode 100644 index 000000000000..c2d3aa1dadd4 --- /dev/null +++ b/include/linux/platform_data/tsc2007.h @@ -0,0 +1,22 @@ +#ifndef __LINUX_I2C_TSC2007_H +#define __LINUX_I2C_TSC2007_H + +/* linux/platform_data/tsc2007.h */ + +struct tsc2007_platform_data { + u16 model; /* 2007. */ + u16 x_plate_ohms; /* must be non-zero value */ + u16 max_rt; /* max. resistance above which samples are ignored */ + unsigned long poll_period; /* time (in ms) between samples */ + int fuzzx; /* fuzz factor for X, Y and pressure axes */ + int fuzzy; + int fuzzz; + + int (*get_pendown_state)(struct device *); + /* If needed, clear 2nd level interrupt source */ + void (*clear_penirq)(void); + int (*init_platform_hw)(void); + void (*exit_platform_hw)(void); +}; + +#endif -- cgit v1.2.3 From 0a848d638a25b4f2767b260ed83c271854e93cce Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 23:57:25 +0200 Subject: gpio: max732x: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Linus Walleij --- include/linux/platform_data/max732x.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/platform_data/max732x.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/max732x.h b/include/linux/platform_data/max732x.h new file mode 100644 index 000000000000..c04bac8bf2fe --- /dev/null +++ b/include/linux/platform_data/max732x.h @@ -0,0 +1,22 @@ +#ifndef __LINUX_I2C_MAX732X_H +#define __LINUX_I2C_MAX732X_H + +/* platform data for the MAX732x 8/16-bit I/O expander driver */ + +struct max732x_platform_data { + /* number of the first GPIO */ + unsigned gpio_base; + + /* interrupt base */ + int irq_base; + + void *context; /* param to setup/teardown */ + + int (*setup)(struct i2c_client *client, + unsigned gpio, unsigned ngpio, + void *context); + int (*teardown)(struct i2c_client *client, + unsigned gpio, unsigned ngpio, + void *context); +}; +#endif /* __LINUX_I2C_MAX732X_H */ -- cgit v1.2.3 From b6480faeee234829b315168aebcb281ecf95f178 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 23:57:26 +0200 Subject: gpio: pcf857x: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Linus Walleij --- include/linux/platform_data/pcf857x.h | 44 +++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 include/linux/platform_data/pcf857x.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pcf857x.h b/include/linux/platform_data/pcf857x.h new file mode 100644 index 000000000000..0767a2a6b2f1 --- /dev/null +++ b/include/linux/platform_data/pcf857x.h @@ -0,0 +1,44 @@ +#ifndef __LINUX_PCF857X_H +#define __LINUX_PCF857X_H + +/** + * struct pcf857x_platform_data - data to set up pcf857x driver + * @gpio_base: number of the chip's first GPIO + * @n_latch: optional bit-inverse of initial register value; if + * you leave this initialized to zero the driver will act + * like the chip was just reset + * @setup: optional callback issued once the GPIOs are valid + * @teardown: optional callback issued before the GPIOs are invalidated + * @context: optional parameter passed to setup() and teardown() + * + * In addition to the I2C_BOARD_INFO() state appropriate to each chip, + * the i2c_board_info used with the pcf875x driver must provide its + * platform_data (pointer to one of these structures) with at least + * the gpio_base value initialized. + * + * The @setup callback may be used with the kind of board-specific glue + * which hands the (now-valid) GPIOs to other drivers, or which puts + * devices in their initial states using these GPIOs. + * + * These GPIO chips are only "quasi-bidirectional"; read the chip specs + * to understand the behavior. They don't have separate registers to + * record which pins are used for input or output, record which output + * values are driven, or provide access to input values. That must be + * inferred by reading the chip's value and knowing the last value written + * to it. If you leave n_latch initialized to zero, that last written + * value is presumed to be all ones (as if the chip were just reset). + */ +struct pcf857x_platform_data { + unsigned gpio_base; + unsigned n_latch; + + int (*setup)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + int (*teardown)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + void *context; +}; + +#endif /* __LINUX_PCF857X_H */ -- cgit v1.2.3 From 610387d162eb1beb6eb2009af5175dc6b44b8da6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 22:42:32 +0200 Subject: misc: apds990x: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/apds990x.h | 79 ++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 include/linux/platform_data/apds990x.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/apds990x.h b/include/linux/platform_data/apds990x.h new file mode 100644 index 000000000000..d186fcc5d257 --- /dev/null +++ b/include/linux/platform_data/apds990x.h @@ -0,0 +1,79 @@ +/* + * This file is part of the APDS990x sensor driver. + * Chip is combined proximity and ambient light sensor. + * + * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). + * + * Contact: Samu Onkalo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __APDS990X_H__ +#define __APDS990X_H__ + + +#define APDS_IRLED_CURR_12mA 0x3 +#define APDS_IRLED_CURR_25mA 0x2 +#define APDS_IRLED_CURR_50mA 0x1 +#define APDS_IRLED_CURR_100mA 0x0 + +/** + * struct apds990x_chip_factors - defines effect of the cover window + * @ga: Total glass attenuation + * @cf1: clear channel factor 1 for raw to lux conversion + * @irf1: IR channel factor 1 for raw to lux conversion + * @cf2: clear channel factor 2 for raw to lux conversion + * @irf2: IR channel factor 2 for raw to lux conversion + * @df: device factor for conversion formulas + * + * Structure for tuning ALS calculation to match with environment. + * Values depend on the material above the sensor and the sensor + * itself. If the GA is zero, driver will use uncovered sensor default values + * format: decimal value * APDS_PARAM_SCALE except df which is plain integer. + */ +#define APDS_PARAM_SCALE 4096 +struct apds990x_chip_factors { + int ga; + int cf1; + int irf1; + int cf2; + int irf2; + int df; +}; + +/** + * struct apds990x_platform_data - platform data for apsd990x.c driver + * @cf: chip factor data + * @pddrive: IR-led driving current + * @ppcount: number of IR pulses used for proximity estimation + * @setup_resources: interrupt line setup call back function + * @release_resources: interrupt line release call back function + * + * Proximity detection result depends heavily on correct ppcount, pdrive + * and cover window. + * + */ + +struct apds990x_platform_data { + struct apds990x_chip_factors cf; + u8 pdrive; + u8 ppcount; + int (*setup_resources)(void); + int (*release_resources)(void); +}; + +#endif -- cgit v1.2.3 From 7ae5f10a9fc1ae2f001ab3be5be84a5d0a89f918 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 22:42:33 +0200 Subject: misc: bh1770glc: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/bh1770glc.h | 53 +++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 include/linux/platform_data/bh1770glc.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/bh1770glc.h b/include/linux/platform_data/bh1770glc.h new file mode 100644 index 000000000000..8b5e2df36c72 --- /dev/null +++ b/include/linux/platform_data/bh1770glc.h @@ -0,0 +1,53 @@ +/* + * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver. + * Chip is combined proximity and ambient light sensor. + * + * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). + * + * Contact: Samu Onkalo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __BH1770_H__ +#define __BH1770_H__ + +/** + * struct bh1770_platform_data - platform data for bh1770glc driver + * @led_def_curr: IR led driving current. + * @glass_attenuation: Attenuation factor for covering window. + * @setup_resources: Call back for interrupt line setup function + * @release_resources: Call back for interrupte line release function + * + * Example of glass attenuation: 16384 * 385 / 100 means attenuation factor + * of 3.85. i.e. light_above_sensor = light_above_cover_window / 3.85 + */ + +struct bh1770_platform_data { +#define BH1770_LED_5mA 0 +#define BH1770_LED_10mA 1 +#define BH1770_LED_20mA 2 +#define BH1770_LED_50mA 3 +#define BH1770_LED_100mA 4 +#define BH1770_LED_150mA 5 +#define BH1770_LED_200mA 6 + __u8 led_def_curr; +#define BH1770_NEUTRAL_GA 16384 /* 16384 / 16384 = 1 */ + __u32 glass_attenuation; + int (*setup_resources)(void); + int (*release_resources)(void); +}; +#endif -- cgit v1.2.3 From c1a4634013141b96324c647b45356e16f1fff781 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 23:57:27 +0200 Subject: gpio: adp5588: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Acked-by: Dmitry Torokhov Signed-off-by: Linus Walleij --- include/linux/platform_data/adp5588.h | 172 ++++++++++++++++++++++++++++++++++ 1 file changed, 172 insertions(+) create mode 100644 include/linux/platform_data/adp5588.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/adp5588.h b/include/linux/platform_data/adp5588.h new file mode 100644 index 000000000000..c2153049cfbd --- /dev/null +++ b/include/linux/platform_data/adp5588.h @@ -0,0 +1,172 @@ +/* + * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller + * + * Copyright 2009-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _ADP5588_H +#define _ADP5588_H + +#define DEV_ID 0x00 /* Device ID */ +#define CFG 0x01 /* Configuration Register1 */ +#define INT_STAT 0x02 /* Interrupt Status Register */ +#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */ +#define Key_EVENTA 0x04 /* Key Event Register A */ +#define Key_EVENTB 0x05 /* Key Event Register B */ +#define Key_EVENTC 0x06 /* Key Event Register C */ +#define Key_EVENTD 0x07 /* Key Event Register D */ +#define Key_EVENTE 0x08 /* Key Event Register E */ +#define Key_EVENTF 0x09 /* Key Event Register F */ +#define Key_EVENTG 0x0A /* Key Event Register G */ +#define Key_EVENTH 0x0B /* Key Event Register H */ +#define Key_EVENTI 0x0C /* Key Event Register I */ +#define Key_EVENTJ 0x0D /* Key Event Register J */ +#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */ +#define UNLOCK1 0x0F /* Unlock Key1 */ +#define UNLOCK2 0x10 /* Unlock Key2 */ +#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */ +#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */ +#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */ +#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */ +#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */ +#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */ +#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */ +#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */ +#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */ +#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */ +#define GPI_EM1 0x20 /* GPI Event Mode 1 */ +#define GPI_EM2 0x21 /* GPI Event Mode 2 */ +#define GPI_EM3 0x22 /* GPI Event Mode 3 */ +#define GPIO_DIR1 0x23 /* GPIO Data Direction */ +#define GPIO_DIR2 0x24 /* GPIO Data Direction */ +#define GPIO_DIR3 0x25 /* GPIO Data Direction */ +#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */ +#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */ +#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */ +#define Debounce_DIS1 0x29 /* Debounce Disable */ +#define Debounce_DIS2 0x2A /* Debounce Disable */ +#define Debounce_DIS3 0x2B /* Debounce Disable */ +#define GPIO_PULL1 0x2C /* GPIO Pull Disable */ +#define GPIO_PULL2 0x2D /* GPIO Pull Disable */ +#define GPIO_PULL3 0x2E /* GPIO Pull Disable */ +#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */ +#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */ +#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */ +#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */ +#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */ +#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */ +#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */ +#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */ +#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */ +#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */ +#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */ +#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */ +#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */ +#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */ +#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */ + +#define ADP5588_DEVICE_ID_MASK 0xF + + /* Configuration Register1 */ +#define ADP5588_AUTO_INC (1 << 7) +#define ADP5588_GPIEM_CFG (1 << 6) +#define ADP5588_OVR_FLOW_M (1 << 5) +#define ADP5588_INT_CFG (1 << 4) +#define ADP5588_OVR_FLOW_IEN (1 << 3) +#define ADP5588_K_LCK_IM (1 << 2) +#define ADP5588_GPI_IEN (1 << 1) +#define ADP5588_KE_IEN (1 << 0) + +/* Interrupt Status Register */ +#define ADP5588_CMP2_INT (1 << 5) +#define ADP5588_CMP1_INT (1 << 4) +#define ADP5588_OVR_FLOW_INT (1 << 3) +#define ADP5588_K_LCK_INT (1 << 2) +#define ADP5588_GPI_INT (1 << 1) +#define ADP5588_KE_INT (1 << 0) + +/* Key Lock and Event Counter Register */ +#define ADP5588_K_LCK_EN (1 << 6) +#define ADP5588_LCK21 0x30 +#define ADP5588_KEC 0xF + +#define ADP5588_MAXGPIO 18 +#define ADP5588_BANK(offs) ((offs) >> 3) +#define ADP5588_BIT(offs) (1u << ((offs) & 0x7)) + +/* Put one of these structures in i2c_board_info platform_data */ + +#define ADP5588_KEYMAPSIZE 80 + +#define GPI_PIN_ROW0 97 +#define GPI_PIN_ROW1 98 +#define GPI_PIN_ROW2 99 +#define GPI_PIN_ROW3 100 +#define GPI_PIN_ROW4 101 +#define GPI_PIN_ROW5 102 +#define GPI_PIN_ROW6 103 +#define GPI_PIN_ROW7 104 +#define GPI_PIN_COL0 105 +#define GPI_PIN_COL1 106 +#define GPI_PIN_COL2 107 +#define GPI_PIN_COL3 108 +#define GPI_PIN_COL4 109 +#define GPI_PIN_COL5 110 +#define GPI_PIN_COL6 111 +#define GPI_PIN_COL7 112 +#define GPI_PIN_COL8 113 +#define GPI_PIN_COL9 114 + +#define GPI_PIN_ROW_BASE GPI_PIN_ROW0 +#define GPI_PIN_ROW_END GPI_PIN_ROW7 +#define GPI_PIN_COL_BASE GPI_PIN_COL0 +#define GPI_PIN_COL_END GPI_PIN_COL9 + +#define GPI_PIN_BASE GPI_PIN_ROW_BASE +#define GPI_PIN_END GPI_PIN_COL_END + +#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1) + +struct adp5588_gpi_map { + unsigned short pin; + unsigned short sw_evt; +}; + +struct adp5588_kpad_platform_data { + int rows; /* Number of rows */ + int cols; /* Number of columns */ + const unsigned short *keymap; /* Pointer to keymap */ + unsigned short keymapsize; /* Keymap size */ + unsigned repeat:1; /* Enable key repeat */ + unsigned en_keylock:1; /* Enable Key Lock feature */ + unsigned short unlock_key1; /* Unlock Key 1 */ + unsigned short unlock_key2; /* Unlock Key 2 */ + const struct adp5588_gpi_map *gpimap; + unsigned short gpimapsize; + const struct adp5588_gpio_platform_data *gpio_data; +}; + +struct i2c_client; /* forward declaration */ + +struct adp5588_gpio_platform_data { + int gpio_start; /* GPIO Chip base # */ + const char *const *names; + unsigned irq_base; /* interrupt base # */ + unsigned pullup_dis_mask; /* Pull-Up Disable Mask */ + int (*setup)(struct i2c_client *client, + unsigned gpio, unsigned ngpio, + void *context); + int (*teardown)(struct i2c_client *client, + unsigned gpio, unsigned ngpio, + void *context); + void *context; +}; + +#endif -- cgit v1.2.3 From b987e98e50ab90e5291581204ef7a1c649313a70 Mon Sep 17 00:00:00 2001 From: Woojung Huh Date: Wed, 31 May 2017 20:19:19 +0000 Subject: dsa: add DSA switch driver for Microchip KSZ9477 The KSZ9477 is a fully integrated layer 2, managed, 7 ports GigE switch with numerous advanced features. 5 ports incorporate 10/100/1000 Mbps PHYs. The other 2 ports have interfaces that can be configured as SGMII, RGMII, MII or RMII. Either of these may connect directly to a host processor or to an external PHY. The SGMII port may interface to a fiber optic transceiver. This driver currently supports vlan, fdb, mdb & mirror dsa switch operations. Reviewed-by: Florian Fainelli Signed-off-by: Woojung Huh Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- include/linux/platform_data/microchip-ksz.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 include/linux/platform_data/microchip-ksz.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/microchip-ksz.h b/include/linux/platform_data/microchip-ksz.h new file mode 100644 index 000000000000..84789ca634aa --- /dev/null +++ b/include/linux/platform_data/microchip-ksz.h @@ -0,0 +1,29 @@ +/* + * Microchip KSZ series switch platform data + * + * Copyright (C) 2017 + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __MICROCHIP_KSZ_H +#define __MICROCHIP_KSZ_H + +#include + +struct ksz_platform_data { + u32 chip_id; + u16 enabled_ports; +}; + +#endif -- cgit v1.2.3 From 278cba7eaf5422510fc4a6b5a4d447f17b00506e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 14 Dec 2016 03:35:03 +0200 Subject: drm: omapdrm: Remove unused default display name support The default display name is both unused and never set by platform data. Remove default display name module parameter, platform data field and runtime infrastructure. Signed-off-by: Laurent Pinchart Acked-by: Bartlomiej Zolnierkiewicz Reviewed-by: Tomi Valkeinen Signed-off-by: Tomi Valkeinen --- include/linux/platform_data/omapdss.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/omapdss.h b/include/linux/platform_data/omapdss.h index 679177929045..7feb011ed500 100644 --- a/include/linux/platform_data/omapdss.h +++ b/include/linux/platform_data/omapdss.h @@ -27,7 +27,6 @@ enum omapdss_version { /* Board specific data */ struct omap_dss_board_info { - const char *default_display_name; int (*dsi_enable_pads)(int dsi_id, unsigned int lane_mask); void (*dsi_disable_pads)(int dsi_id, unsigned int lane_mask); int (*set_min_bus_tput)(struct device *dev, unsigned long r); -- cgit v1.2.3 From cfe76a28e37112f471d4bcb8d5f336e3416299b7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 12 May 2017 09:40:49 +0200 Subject: clk: versatile: delete old RealView clock implementation The old RealView clock implementation is not used anymore (nothing in the kernel calls realview_clk_init()) as we have moved all clocks over to device tree. Delete it. Signed-off-by: Linus Walleij Signed-off-by: Stephen Boyd --- include/linux/platform_data/clk-realview.h | 1 - 1 file changed, 1 deletion(-) delete mode 100644 include/linux/platform_data/clk-realview.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h deleted file mode 100644 index 2e426a7dbc51..000000000000 --- a/include/linux/platform_data/clk-realview.h +++ /dev/null @@ -1 +0,0 @@ -void realview_clk_init(void __iomem *sysbase, bool is_pb1176); -- cgit v1.2.3 From 9010624cc5b446d3377dde4753eecbaf945f3a41 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 22:34:39 +0200 Subject: hwmon: (ads1015) move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Guenter Roeck --- include/linux/platform_data/ads1015.h | 36 +++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 include/linux/platform_data/ads1015.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ads1015.h b/include/linux/platform_data/ads1015.h new file mode 100644 index 000000000000..d5aa2a045669 --- /dev/null +++ b/include/linux/platform_data/ads1015.h @@ -0,0 +1,36 @@ +/* + * Platform Data for ADS1015 12-bit 4-input ADC + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef LINUX_ADS1015_H +#define LINUX_ADS1015_H + +#define ADS1015_CHANNELS 8 + +struct ads1015_channel_data { + bool enabled; + unsigned int pga; + unsigned int data_rate; +}; + +struct ads1015_platform_data { + struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; +}; + +#endif /* LINUX_ADS1015_H */ -- cgit v1.2.3 From 570999f306fc0375a533a1906ff35fffe289e36b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 22:34:40 +0200 Subject: hwmon: (ds620) move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Guenter Roeck --- include/linux/platform_data/ds620.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 include/linux/platform_data/ds620.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ds620.h b/include/linux/platform_data/ds620.h new file mode 100644 index 000000000000..736bb87ac0fc --- /dev/null +++ b/include/linux/platform_data/ds620.h @@ -0,0 +1,21 @@ +#ifndef _LINUX_DS620_H +#define _LINUX_DS620_H + +#include +#include + +/* platform data for the DS620 temperature sensor and thermostat */ + +struct ds620_platform_data { + /* + * Thermostat output pin PO mode: + * 0 = always low (default) + * 1 = PO_LOW + * 2 = PO_HIGH + * + * (see Documentation/hwmon/ds620) + */ + int pomode; +}; + +#endif /* _LINUX_DS620_H */ -- cgit v1.2.3 From 8116e8dd564fcbadf9f3697dcd0c3d37c049fb45 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 22:34:41 +0200 Subject: hwmon: (ltc4245) move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Guenter Roeck --- include/linux/platform_data/ltc4245.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 include/linux/platform_data/ltc4245.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ltc4245.h b/include/linux/platform_data/ltc4245.h new file mode 100644 index 000000000000..56bda4be0016 --- /dev/null +++ b/include/linux/platform_data/ltc4245.h @@ -0,0 +1,21 @@ +/* + * Platform Data for LTC4245 hardware monitor chip + * + * Copyright (c) 2010 Ira W. Snyder + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef LINUX_LTC4245_H +#define LINUX_LTC4245_H + +#include + +struct ltc4245_platform_data { + bool use_extra_gpios; +}; + +#endif /* LINUX_LTC4245_H */ -- cgit v1.2.3 From 0c9fe1614126171c70e0dc0b0635d45a327ac82a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 22:34:42 +0200 Subject: hwmon: (max6639) move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Guenter Roeck --- include/linux/platform_data/max6639.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 include/linux/platform_data/max6639.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/max6639.h b/include/linux/platform_data/max6639.h new file mode 100644 index 000000000000..6011c42034da --- /dev/null +++ b/include/linux/platform_data/max6639.h @@ -0,0 +1,14 @@ +#ifndef _LINUX_MAX6639_H +#define _LINUX_MAX6639_H + +#include + +/* platform data for the MAX6639 temperature sensor and fan control */ + +struct max6639_platform_data { + bool pwm_polarity; /* Polarity low (0) or high (1, default) */ + int ppr; /* Pulses per rotation 1..4 (default == 2) */ + int rpm_range; /* 2000, 4000 (default), 8000 or 16000 */ +}; + +#endif /* _LINUX_MAX6639_H */ -- cgit v1.2.3 From be36e000bc2d28512721c6e09c3df920b1bfad5e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 9 Jun 2017 12:18:02 +0200 Subject: ARM: at91: fix at91_suspend_entering_slow_clock link error When CONFIG_ARCH_AT91 is enabled, but none of the specific SoC support is in use, some at91 specific drivers fail to link: drivers/tty/serial/atmel_serial.o: In function `atmel_serial_suspend': atmel_serial.c:(.text.atmel_serial_suspend+0x1e): undefined reference to `at91_suspend_entering_slow_clock' drivers/usb/host/ohci-at91.o: In function `ohci_hcd_at91_drv_suspend': ohci-at91.c:(.text.ohci_hcd_at91_drv_suspend+0x12): undefined reference to `at91_suspend_entering_slow_clock' drivers/usb/gadget/udc/at91_udc.o: In function `at91udc_suspend': at91_udc.c:(.text.at91udc_suspend+0x26): undefined reference to `at91_suspend_entering_slow_clock' This changes the at91_suspend_entering_slow_clock hack once more, adding an alternative inline implementation that is used exactly in those cases that don't provide the normal implementation. Fixes: c1892c2379d2 ("ARM: at91: handle CONFIG_PM for armv7m configurations") Signed-off-by: Arnd Bergmann Signed-off-by: Alexandre Belloni --- include/linux/platform_data/atmel.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 3c8825b67298..7b6dce7d6d33 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -52,6 +52,13 @@ struct atmel_uart_data { }; /* FIXME: this needs a better location, but gets stuff building again */ +#ifdef CONFIG_ATMEL_PM extern int at91_suspend_entering_slow_clock(void); +#else +static inline int at91_suspend_entering_slow_clock(void) +{ + return 0; +} +#endif #endif /* __ATMEL_H__ */ -- cgit v1.2.3 From 8a3d809373c6790b3958f74fa5640aedd4e804dd Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 13 Jun 2017 14:51:07 +0200 Subject: ARM: at91: remove atmel_nand_data Since AVR32 is gone and the driver rework, struct atmel_nand_data is not used anywhere. Acked-by: Boris Brezillon Signed-off-by: Alexandre Belloni --- include/linux/platform_data/atmel.h | 21 --------------------- 1 file changed, 21 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 7b6dce7d6d33..70c5c766628e 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -7,8 +7,6 @@ #ifndef __ATMEL_H__ #define __ATMEL_H__ -#include -#include #include /* Compact Flash */ @@ -23,25 +21,6 @@ struct at91_cf_data { #define AT91_IDE_SWAP_A0_A2 0x02 }; - /* NAND / SmartMedia */ -struct atmel_nand_data { - int enable_pin; /* chip enable */ - int det_pin; /* card detect */ - int rdy_pin; /* ready/busy */ - u8 rdy_pin_active_low; /* rdy_pin value is inverted */ - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 bus_width_16; /* buswidth is 16 bit */ - u8 ecc_mode; /* ecc mode */ - u8 on_flash_bbt; /* bbt on flash */ - struct mtd_partition *parts; - unsigned int num_parts; - bool has_dma; /* support dma transfer */ - - /* default is false, only for at32ap7000 chip is true */ - bool need_reset_workaround; -}; - /* Serial */ struct atmel_uart_data { int num; /* port num */ -- cgit v1.2.3 From 058fe49da3b6ab71b57effd49dcc5d007071eea5 Mon Sep 17 00:00:00 2001 From: Leilk Liu Date: Mon, 12 Jun 2017 09:24:39 +0800 Subject: spi: mediatek: adjust register to enhance time accuracy this patch adjust register to enhance time accuracy. Signed-off-by: Leilk Liu Signed-off-by: Mark Brown --- include/linux/platform_data/spi-mt65xx.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/spi-mt65xx.h b/include/linux/platform_data/spi-mt65xx.h index 54b04483976c..ba4e4bb70262 100644 --- a/include/linux/platform_data/spi-mt65xx.h +++ b/include/linux/platform_data/spi-mt65xx.h @@ -16,5 +16,7 @@ struct mtk_chip_config { u32 tx_mlsb; u32 rx_mlsb; + u32 cs_pol; + u32 sample_sel; }; #endif -- cgit v1.2.3 From 92c8f7c0e109d2fcff607a13dd7c1437d6c9f87a Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 13 Jun 2017 22:24:39 +0200 Subject: tty/serial: atmel: make the driver DT only Now that AVR32 is gone, platform_data are not used to initialize the driver anymore, remove that path from the driver. Also remove the now unused struct atmel_uart_data. Signed-off-by: Alexandre Belloni Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/atmel.h | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 3c8825b67298..d36bc8d17e97 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -9,7 +9,6 @@ #include #include -#include /* Compact Flash */ struct at91_cf_data { @@ -42,15 +41,6 @@ struct atmel_nand_data { bool need_reset_workaround; }; - /* Serial */ -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); -- cgit v1.2.3 From e33a3f84f88f13eab6a45c5230c9b9ee9ac78e60 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 30 Mar 2017 12:15:42 +0200 Subject: NFC: nfcmrvl: allow gpio 0 for reset signalling Allow gpio 0 to be used for reset signalling, and instead use negative errnos to disable the reset functionality. Signed-off-by: Johan Hovold Signed-off-by: Samuel Ortiz --- include/linux/platform_data/nfcmrvl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/nfcmrvl.h b/include/linux/platform_data/nfcmrvl.h index a6f9d633f5be..9e75ac8d19be 100644 --- a/include/linux/platform_data/nfcmrvl.h +++ b/include/linux/platform_data/nfcmrvl.h @@ -23,7 +23,7 @@ struct nfcmrvl_platform_data { */ /* GPIO that is wired to RESET_N signal */ - unsigned int reset_n_io; + int reset_n_io; /* Tell if transport is muxed in HCI one */ unsigned int hci_muxed; -- cgit v1.2.3 From 61a04101c8a486dec586b2657bffede1b3b979f3 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 19 Jun 2017 13:08:52 +0300 Subject: NFC: st-nci: Get rid of platform data Legacy platform data must go away. We are on the safe side here since there are no users of it in the kernel. If anyone by any odd reason needs it the GPIO lookup tables and built-in device properties at your service. Signed-off-by: Andy Shevchenko Signed-off-by: Samuel Ortiz --- include/linux/platform_data/st-nci.h | 31 ------------------------------- 1 file changed, 31 deletions(-) delete mode 100644 include/linux/platform_data/st-nci.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/st-nci.h b/include/linux/platform_data/st-nci.h deleted file mode 100644 index f6494b347c06..000000000000 --- a/include/linux/platform_data/st-nci.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Driver include for ST NCI NFC chip family. - * - * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see . - */ - -#ifndef _ST_NCI_H_ -#define _ST_NCI_H_ - -#define ST_NCI_DRIVER_NAME "st_nci" - -struct st_nci_nfc_platform_data { - unsigned int gpio_reset; - unsigned int irq_polarity; - bool is_ese_present; - bool is_uicc_present; -}; - -#endif /* _ST_NCI_H_ */ -- cgit v1.2.3 From 8476d6cde2cd11a2cb87bd7392fc318eec25c8a0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 22 May 2017 00:09:52 +0200 Subject: backlight: adp8860: Move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Acked-by: Daniel Thompson Acked-by: Michael Hennerich Signed-off-by: Lee Jones --- include/linux/platform_data/adp8860.h | 154 ++++++++++++++++++++++++++++++++++ 1 file changed, 154 insertions(+) create mode 100644 include/linux/platform_data/adp8860.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/adp8860.h b/include/linux/platform_data/adp8860.h new file mode 100644 index 000000000000..0b4d39855c91 --- /dev/null +++ b/include/linux/platform_data/adp8860.h @@ -0,0 +1,154 @@ +/* + * Definitions and platform data for Analog Devices + * Backlight drivers ADP8860 + * + * Copyright 2009-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __LINUX_I2C_ADP8860_H +#define __LINUX_I2C_ADP8860_H + +#include +#include + +#define ID_ADP8860 8860 + +#define ADP8860_MAX_BRIGHTNESS 0x7F +#define FLAG_OFFT_SHIFT 8 + +/* + * LEDs subdevice platform data + */ + +#define ADP8860_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT) +#define ADP8860_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT) +#define ADP8860_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT) +#define ADP8860_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT) + +#define ADP8860_LED_ONT_200ms 0 +#define ADP8860_LED_ONT_600ms 1 +#define ADP8860_LED_ONT_800ms 2 +#define ADP8860_LED_ONT_1200ms 3 + +#define ADP8860_LED_D7 (7) +#define ADP8860_LED_D6 (6) +#define ADP8860_LED_D5 (5) +#define ADP8860_LED_D4 (4) +#define ADP8860_LED_D3 (3) +#define ADP8860_LED_D2 (2) +#define ADP8860_LED_D1 (1) + +/* + * Backlight subdevice platform data + */ + +#define ADP8860_BL_D7 (1 << 6) +#define ADP8860_BL_D6 (1 << 5) +#define ADP8860_BL_D5 (1 << 4) +#define ADP8860_BL_D4 (1 << 3) +#define ADP8860_BL_D3 (1 << 2) +#define ADP8860_BL_D2 (1 << 1) +#define ADP8860_BL_D1 (1 << 0) + +#define ADP8860_FADE_T_DIS 0 /* Fade Timer Disabled */ +#define ADP8860_FADE_T_300ms 1 /* 0.3 Sec */ +#define ADP8860_FADE_T_600ms 2 +#define ADP8860_FADE_T_900ms 3 +#define ADP8860_FADE_T_1200ms 4 +#define ADP8860_FADE_T_1500ms 5 +#define ADP8860_FADE_T_1800ms 6 +#define ADP8860_FADE_T_2100ms 7 +#define ADP8860_FADE_T_2400ms 8 +#define ADP8860_FADE_T_2700ms 9 +#define ADP8860_FADE_T_3000ms 10 +#define ADP8860_FADE_T_3500ms 11 +#define ADP8860_FADE_T_4000ms 12 +#define ADP8860_FADE_T_4500ms 13 +#define ADP8860_FADE_T_5000ms 14 +#define ADP8860_FADE_T_5500ms 15 /* 5.5 Sec */ + +#define ADP8860_FADE_LAW_LINEAR 0 +#define ADP8860_FADE_LAW_SQUARE 1 +#define ADP8860_FADE_LAW_CUBIC1 2 +#define ADP8860_FADE_LAW_CUBIC2 3 + +#define ADP8860_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */ +#define ADP8860_BL_AMBL_FILT_160ms 1 +#define ADP8860_BL_AMBL_FILT_320ms 2 +#define ADP8860_BL_AMBL_FILT_640ms 3 +#define ADP8860_BL_AMBL_FILT_1280ms 4 +#define ADP8860_BL_AMBL_FILT_2560ms 5 +#define ADP8860_BL_AMBL_FILT_5120ms 6 +#define ADP8860_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */ + +/* + * Blacklight current 0..30mA + */ +#define ADP8860_BL_CUR_mA(I) ((I * 127) / 30) + +/* + * L2 comparator current 0..1106uA + */ +#define ADP8860_L2_COMP_CURR_uA(I) ((I * 255) / 1106) + +/* + * L3 comparator current 0..138uA + */ +#define ADP8860_L3_COMP_CURR_uA(I) ((I * 255) / 138) + +struct adp8860_backlight_platform_data { + u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */ + + u8 bl_fade_in; /* Backlight Fade-In Timer */ + u8 bl_fade_out; /* Backlight Fade-Out Timer */ + u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */ + + u8 en_ambl_sens; /* 1 = enable ambient light sensor */ + u8 abml_filt; /* Light sensor filter time */ + + u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + + /** + * Independent Current Sinks / LEDS + * Sinks not assigned to the Backlight can be exposed to + * user space using the LEDS CLASS interface + */ + + int num_leds; + struct led_info *leds; + u8 led_fade_in; /* LED Fade-In Timer */ + u8 led_fade_out; /* LED Fade-Out Timer */ + u8 led_fade_law; /* fade-on/fade-off transfer characteristic */ + u8 led_on_time; + + /** + * Gain down disable. Setting this option does not allow the + * charge pump to switch to lower gains. NOT AVAILABLE on ADP8860 + * 1 = the charge pump doesn't switch down in gain until all LEDs are 0. + * The charge pump switches up in gain as needed. This feature is + * useful if the ADP8863 charge pump is used to drive an external load. + * This feature must be used when utilizing small fly capacitors + * (0402 or smaller). + * 0 = the charge pump automatically switches up and down in gain. + * This provides optimal efficiency, but is not suitable for driving + * loads that are not connected through the ADP8863 diode drivers. + * Additionally, the charge pump fly capacitors should be low ESR + * and sized 0603 or greater. + */ + + u8 gdwn_dis; +}; + +#endif /* __LINUX_I2C_ADP8860_H */ -- cgit v1.2.3 From 056d6ff470a8e782648fd020940c04d0d4a0d761 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 22 May 2017 00:09:53 +0200 Subject: video: adp8870: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Acked-by: Daniel Thompson Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Lee Jones --- include/linux/platform_data/adp8870.h | 153 ++++++++++++++++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 include/linux/platform_data/adp8870.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/adp8870.h b/include/linux/platform_data/adp8870.h new file mode 100644 index 000000000000..624dceccbd5b --- /dev/null +++ b/include/linux/platform_data/adp8870.h @@ -0,0 +1,153 @@ +/* + * Definitions and platform data for Analog Devices + * Backlight drivers ADP8870 + * + * Copyright 2009-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __LINUX_I2C_ADP8870_H +#define __LINUX_I2C_ADP8870_H + +#define ID_ADP8870 8870 + +#define ADP8870_MAX_BRIGHTNESS 0x7F +#define FLAG_OFFT_SHIFT 8 + +/* + * LEDs subdevice platform data + */ + +#define ADP8870_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT) +#define ADP8870_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT) +#define ADP8870_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT) +#define ADP8870_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT) + +#define ADP8870_LED_ONT_200ms 0 +#define ADP8870_LED_ONT_600ms 1 +#define ADP8870_LED_ONT_800ms 2 +#define ADP8870_LED_ONT_1200ms 3 + +#define ADP8870_LED_D7 (7) +#define ADP8870_LED_D6 (6) +#define ADP8870_LED_D5 (5) +#define ADP8870_LED_D4 (4) +#define ADP8870_LED_D3 (3) +#define ADP8870_LED_D2 (2) +#define ADP8870_LED_D1 (1) + +/* + * Backlight subdevice platform data + */ + +#define ADP8870_BL_D7 (1 << 6) +#define ADP8870_BL_D6 (1 << 5) +#define ADP8870_BL_D5 (1 << 4) +#define ADP8870_BL_D4 (1 << 3) +#define ADP8870_BL_D3 (1 << 2) +#define ADP8870_BL_D2 (1 << 1) +#define ADP8870_BL_D1 (1 << 0) + +#define ADP8870_FADE_T_DIS 0 /* Fade Timer Disabled */ +#define ADP8870_FADE_T_300ms 1 /* 0.3 Sec */ +#define ADP8870_FADE_T_600ms 2 +#define ADP8870_FADE_T_900ms 3 +#define ADP8870_FADE_T_1200ms 4 +#define ADP8870_FADE_T_1500ms 5 +#define ADP8870_FADE_T_1800ms 6 +#define ADP8870_FADE_T_2100ms 7 +#define ADP8870_FADE_T_2400ms 8 +#define ADP8870_FADE_T_2700ms 9 +#define ADP8870_FADE_T_3000ms 10 +#define ADP8870_FADE_T_3500ms 11 +#define ADP8870_FADE_T_4000ms 12 +#define ADP8870_FADE_T_4500ms 13 +#define ADP8870_FADE_T_5000ms 14 +#define ADP8870_FADE_T_5500ms 15 /* 5.5 Sec */ + +#define ADP8870_FADE_LAW_LINEAR 0 +#define ADP8870_FADE_LAW_SQUARE 1 +#define ADP8870_FADE_LAW_CUBIC1 2 +#define ADP8870_FADE_LAW_CUBIC2 3 + +#define ADP8870_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */ +#define ADP8870_BL_AMBL_FILT_160ms 1 +#define ADP8870_BL_AMBL_FILT_320ms 2 +#define ADP8870_BL_AMBL_FILT_640ms 3 +#define ADP8870_BL_AMBL_FILT_1280ms 4 +#define ADP8870_BL_AMBL_FILT_2560ms 5 +#define ADP8870_BL_AMBL_FILT_5120ms 6 +#define ADP8870_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */ + +/* + * Blacklight current 0..30mA + */ +#define ADP8870_BL_CUR_mA(I) ((I * 127) / 30) + +/* + * L2 comparator current 0..1106uA + */ +#define ADP8870_L2_COMP_CURR_uA(I) ((I * 255) / 1106) + +/* + * L3 comparator current 0..551uA + */ +#define ADP8870_L3_COMP_CURR_uA(I) ((I * 255) / 551) + +/* + * L4 comparator current 0..275uA + */ +#define ADP8870_L4_COMP_CURR_uA(I) ((I * 255) / 275) + +/* + * L5 comparator current 0..138uA + */ +#define ADP8870_L5_COMP_CURR_uA(I) ((I * 255) / 138) + +struct adp8870_backlight_platform_data { + u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */ + u8 pwm_assign; /* 1 = Enables PWM mode */ + + u8 bl_fade_in; /* Backlight Fade-In Timer */ + u8 bl_fade_out; /* Backlight Fade-Out Timer */ + u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */ + + u8 en_ambl_sens; /* 1 = enable ambient light sensor */ + u8 abml_filt; /* Light sensor filter time */ + + u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_bright_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_bright_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l4_indoor_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l4_indor_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l5_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l5_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + u8 l4_trip; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + u8 l4_hyst; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + u8 l5_trip; /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + u8 l5_hyst; /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + + /** + * Independent Current Sinks / LEDS + * Sinks not assigned to the Backlight can be exposed to + * user space using the LEDS CLASS interface + */ + + int num_leds; + struct led_info *leds; + u8 led_fade_in; /* LED Fade-In Timer */ + u8 led_fade_out; /* LED Fade-Out Timer */ + u8 led_fade_law; /* fade-on/fade-off transfer characteristic */ + u8 led_on_time; +}; + +#endif /* __LINUX_I2C_ADP8870_H */ -- cgit v1.2.3 From c945dccc80856107f109c36a7d0e29a371b5d1b5 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 12 Jul 2017 14:37:48 -0700 Subject: ARM: samsung: usb-ohci: move inline before return type Make the code like the rest of the kernel. Link: http://lkml.kernel.org/r/667a515b8d0f10f2465d519f8595edd91552fc5e.1499284835.git.joe@perches.com Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/platform_data/usb-ohci-s3c2410.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/usb-ohci-s3c2410.h b/include/linux/platform_data/usb-ohci-s3c2410.h index 7fa1fbefc3f2..cc7554ae6e8b 100644 --- a/include/linux/platform_data/usb-ohci-s3c2410.h +++ b/include/linux/platform_data/usb-ohci-s3c2410.h @@ -31,7 +31,7 @@ struct s3c2410_hcd_info { void (*report_oc)(struct s3c2410_hcd_info *, int ports); }; -static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) +static inline void s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) { if (info->report_oc != NULL) { (info->report_oc)(info, ports); -- cgit v1.2.3