From 131497acd88a4456d99247cee457baefd2817835 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Sat, 16 Jan 2016 14:24:07 +0100 Subject: iio: add ad5761 DAC driver ad5761 is a 1-channel DAC with configurable output range. The driver uses the regulator interface for its voltage ref. It shares its register layout with ad5761r, ad5721 and ad5721r. Differences: ad5761* are 16 bit, ad5721* are 12 bits. ad57*1r have an internal reference. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Jonathan Cameron --- include/linux/platform_data/ad5761.h | 44 ++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 include/linux/platform_data/ad5761.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ad5761.h b/include/linux/platform_data/ad5761.h new file mode 100644 index 000000000000..7bd8ed7d978e --- /dev/null +++ b/include/linux/platform_data/ad5761.h @@ -0,0 +1,44 @@ +/* + * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter + * + * Copyright 2016 Qtechnology A/S + * 2016 Ricardo Ribalda + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD5761_H__ +#define __LINUX_PLATFORM_DATA_AD5761_H__ + +/** + * enum ad5761_voltage_range - Voltage range the AD5761 is configured for. + * @AD5761_VOLTAGE_RANGE_M10V_10V: -10V to 10V + * @AD5761_VOLTAGE_RANGE_0V_10V: 0V to 10V + * @AD5761_VOLTAGE_RANGE_M5V_5V: -5V to 5V + * @AD5761_VOLTAGE_RANGE_0V_5V: 0V to 5V + * @AD5761_VOLTAGE_RANGE_M2V5_7V5: -2.5V to 7.5V + * @AD5761_VOLTAGE_RANGE_M3V_3V: -3V to 3V + * @AD5761_VOLTAGE_RANGE_0V_16V: 0V to 16V + * @AD5761_VOLTAGE_RANGE_0V_20V: 0V to 20V + */ + +enum ad5761_voltage_range { + AD5761_VOLTAGE_RANGE_M10V_10V, + AD5761_VOLTAGE_RANGE_0V_10V, + AD5761_VOLTAGE_RANGE_M5V_5V, + AD5761_VOLTAGE_RANGE_0V_5V, + AD5761_VOLTAGE_RANGE_M2V5_7V5, + AD5761_VOLTAGE_RANGE_M3V_3V, + AD5761_VOLTAGE_RANGE_0V_16V, + AD5761_VOLTAGE_RANGE_0V_20V, +}; + +/** + * struct ad5761_platform_data - AD5761 DAC driver platform data + * @voltage_range: Voltage range the AD5761 is configured for + */ + +struct ad5761_platform_data { + enum ad5761_voltage_range voltage_range; +}; + +#endif -- cgit v1.2.3 From f88f44cbf10cf5bd42d6e46ea6625d9bfa5f155d Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Mon, 7 Dec 2015 23:25:59 +0100 Subject: mtd: nand: s3c2410: kill the ->ecc_layout field The s3c2410 is allowing board data to overload the default ECC layout defined inside the driver, but this feature is not used by board specific definitions. Kill this field so that we can easily move to a model where ecclayout are dynamically allocated by the NAND controller driver. Signed-off-by: Boris Brezillon Acked-by: Krzysztof Kozlowski Signed-off-by: Brian Norris --- include/linux/platform_data/mtd-nand-s3c2410.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h index 36bb92172f47..c55e42ee57fa 100644 --- a/include/linux/platform_data/mtd-nand-s3c2410.h +++ b/include/linux/platform_data/mtd-nand-s3c2410.h @@ -40,7 +40,6 @@ struct s3c2410_nand_set { char *name; int *nr_map; struct mtd_partition *partitions; - struct nand_ecclayout *ecc_layout; }; struct s3c2410_platform_nand { -- cgit v1.2.3 From 1349ba02bf72caafa36a2d6878cdba340d65b2ac Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 21 Jan 2016 09:46:12 +0100 Subject: ARM: OMAP: serial: Rename DRIVER_NAME DRIVER_NAME is too generic to be used in a driver-specific platform data file. Use a name specific to the driver instead, to avoid collisions. Signed-off-by: Jean Delvare Acked-by: Tony Lindgren Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/serial-omap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h index d09275f3cde3..2ba2c34ca3d3 100644 --- a/include/linux/platform_data/serial-omap.h +++ b/include/linux/platform_data/serial-omap.h @@ -21,7 +21,7 @@ #include #include -#define DRIVER_NAME "omap_uart" +#define OMAP_SERIAL_DRIVER_NAME "omap_uart" /* * Use tty device name as ttyO, [O -> OMAP] -- cgit v1.2.3 From d6dde63e90cf0d34ae61e885a5eb254c59eb3358 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Irest=C3=A5l?= Date: Tue, 16 Feb 2016 13:56:42 +0100 Subject: ASoC: adau17x1: Correct typos in file headers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Andreas Irestål Signed-off-by: Mark Brown --- include/linux/platform_data/adau17x1.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/adau17x1.h b/include/linux/platform_data/adau17x1.h index a81766cae230..9db1b905df24 100644 --- a/include/linux/platform_data/adau17x1.h +++ b/include/linux/platform_data/adau17x1.h @@ -1,5 +1,5 @@ /* - * Driver for ADAU1761/ADAU1461/ADAU1761/ADAU1961/ADAU1781/ADAU1781 codecs + * Driver for ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 codecs * * Copyright 2011-2014 Analog Devices Inc. * Author: Lars-Peter Clausen -- cgit v1.2.3 From c283e41ef32442f41e7180f9bb1c5aedf9255bfe Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Mon, 15 Feb 2016 21:57:46 +0100 Subject: dmaengine: mmp-pdma: add number of requestors The DMA chip has a fixed number of requestor lines used for flow control. This number is platform dependent. The pxa_dma dma driver will use this value to activate or not the flow control. There won't be any impact on mmp_pdma driver. Signed-off-by: Robert Jarzmik --- include/linux/platform_data/mmp_dma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h index 2a330ec9e2af..d1397c8ed94e 100644 --- a/include/linux/platform_data/mmp_dma.h +++ b/include/linux/platform_data/mmp_dma.h @@ -14,6 +14,7 @@ struct mmp_dma_platdata { int dma_channels; + int nb_requestors; }; #endif /* MMP_DMA_H */ -- cgit v1.2.3 From bec3c11bad0e7ac05fb90f204d0ab6f79945822b Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 26 Feb 2016 20:59:24 +0100 Subject: misc: at24: replace memory_accessor with nvmem_device_read Now that the AT24 uses the NVMEM framework, replace the memory_accessor in the setup() callback with nvmem API calls. Signed-off-by: Andrew Lunn Acked-by: Srinivas Kandagatla Tested-by: Sekhar Nori Acked-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/at24.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h index c42aa89d34ee..dc9a13e5acda 100644 --- a/include/linux/platform_data/at24.h +++ b/include/linux/platform_data/at24.h @@ -9,7 +9,7 @@ #define _LINUX_AT24_H #include -#include +#include /** * struct at24_platform_data - data to set up at24 (generic eeprom) driver @@ -17,7 +17,7 @@ * @page_size: number of byte which can be written in one go * @flags: tunable options, check AT24_FLAG_* defines * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via memory_accessor, see example + code to access eeprom via nvmem, see example * @context: optional parameter passed to setup() * * If you set up a custom eeprom type, please double-check the parameters. @@ -26,13 +26,13 @@ * * An example in pseudo code for a setup() callback: * - * void get_mac_addr(struct memory_accessor *mem_acc, void *context) + * void get_mac_addr(struct mvmem_device *nvmem, void *context) * { * u8 *mac_addr = ethernet_pdata->mac_addr; * off_t offset = context; * * // Read MAC addr from EEPROM - * if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); * } * @@ -48,7 +48,7 @@ struct at24_platform_data { #define AT24_FLAG_IRUGO 0x20 /* sysfs-entry will be world-readable */ #define AT24_FLAG_TAKE8ADDR 0x10 /* take always 8 addresses (24c00) */ - void (*setup)(struct memory_accessor *, void *context); + void (*setup)(struct nvmem_device *nvmem, void *context); void *context; }; -- cgit v1.2.3 From 54ce3a0d801142c96935122736a46c08d15d83b5 Mon Sep 17 00:00:00 2001 From: Joseph McNally Date: Sun, 28 Feb 2016 22:31:23 +0000 Subject: hwmon: (ntc_thermistor) Add support for ncpXXxh103 This patch adds support for the Murata NCP15XH103 thermistor series. Signed-off-by: Joseph McNally Signed-off-by: Guenter Roeck --- include/linux/platform_data/ntc_thermistor.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index aed170588b74..698d0d59db76 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -28,6 +28,7 @@ enum ntc_thermistor_type { TYPE_NCPXXWL333, TYPE_B57330V2103, TYPE_NCPXXWF104, + TYPE_NCPXXXH103, }; struct ntc_thermistor_platform_data { -- cgit v1.2.3 From 4d7928959832ea41f7f91456b76da19cad01bd09 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 17 Feb 2016 11:27:07 +0100 Subject: brcmfmac: switch to new platform data Platform data is only available for sdio. With this patch a new platform data structure is being used which allows for platform data for any device and configurable per device. This patch only switches to the new structure and adds support for SDIO devices. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- include/linux/platform_data/brcmfmac-sdio.h | 135 -------------------- include/linux/platform_data/brcmfmac.h | 185 ++++++++++++++++++++++++++++ 2 files changed, 185 insertions(+), 135 deletions(-) delete mode 100644 include/linux/platform_data/brcmfmac-sdio.h create mode 100644 include/linux/platform_data/brcmfmac.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h deleted file mode 100644 index e75dcbf2b230..000000000000 --- a/include/linux/platform_data/brcmfmac-sdio.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (c) 2013 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _LINUX_BRCMFMAC_PLATFORM_H -#define _LINUX_BRCMFMAC_PLATFORM_H - -/* - * Platform specific driver functions and data. Through the platform specific - * device data functions can be provided to help the brcmfmac driver to - * operate with the device in combination with the used platform. - * - * Use the platform data in the following (similar) way: - * - * -#include - - -static void brcmfmac_power_on(void) -{ -} - -static void brcmfmac_power_off(void) -{ -} - -static void brcmfmac_reset(void) -{ -} - -static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { - .power_on = brcmfmac_power_on, - .power_off = brcmfmac_power_off, - .reset = brcmfmac_reset -}; - -static struct platform_device brcmfmac_device = { - .name = BRCMFMAC_SDIO_PDATA_NAME, - .id = PLATFORM_DEVID_NONE, - .dev.platform_data = &brcmfmac_sdio_pdata -}; - -void __init brcmfmac_init_pdata(void) -{ - brcmfmac_sdio_pdata.oob_irq_supported = true; - brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); - brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | - IORESOURCE_IRQ_HIGHLEVEL; - platform_device_register(&brcmfmac_device); -} - * - * - * Note: the brcmfmac can be loaded as module or be statically built-in into - * the kernel. If built-in then do note that it uses module_init (and - * module_exit) routines which equal device_initcall. So if you intend to - * create a module with the platform specific data for the brcmfmac and have - * it built-in to the kernel then use a higher initcall then device_initcall - * (see init.h). If this is not done then brcmfmac will load without problems - * but will not pickup the platform data. - * - * When the driver does not "detect" platform driver data then it will continue - * without reporting anything and just assume there is no data needed. Which is - * probably true for most platforms. - * - * Explanation of the platform_data fields: - * - * drive_strength: is the preferred drive_strength to be used for the SDIO - * pins. If 0 then a default value will be used. This is the target drive - * strength, the exact drive strength which will be used depends on the - * capabilities of the device. - * - * oob_irq_supported: does the board have support for OOB interrupts. SDIO - * in-band interrupts are relatively slow and for having less overhead on - * interrupt processing an out of band interrupt can be used. If the HW - * supports this then enable this by setting this field to true and configure - * the oob related fields. - * - * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are - * used for registering the irq using request_irq function. - * - * broken_sg_support: flag for broken sg list support of SDIO host controller. - * Set this to true if the SDIO host controller has higher align requirement - * than 32 bytes for each scatterlist item. - * - * sd_head_align: alignment requirement for start of data buffer - * - * sd_sgentry_align: length alignment requirement for each sg entry - * - * power_on: This function is called by the brcmfmac when the module gets - * loaded. This can be particularly useful for low power devices. The platform - * spcific routine may for example decide to power up the complete device. - * If there is no use-case for this function then provide NULL. - * - * power_off: This function is called by the brcmfmac when the module gets - * unloaded. At this point the device can be powered down or otherwise be reset. - * So if an actual power_off is not supported but reset is then reset the device - * when this function gets called. This can be particularly useful for low power - * devices. If there is no use-case for this function (either power-down or - * reset) then provide NULL. - * - * reset: This function can get called if the device communication broke down. - * This functionality is particularly useful in case of SDIO type devices. It is - * possible to reset a dongle via sdio data interface, but it requires that - * this is fully functional. This function is chip/module specific and this - * function should return only after the complete reset has completed. - */ - -#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" - -struct brcmfmac_sdio_platform_data { - unsigned int drive_strength; - bool oob_irq_supported; - unsigned int oob_irq_nr; - unsigned long oob_irq_flags; - bool broken_sg_support; - unsigned short sd_head_align; - unsigned short sd_sgentry_align; - void (*power_on)(void); - void (*power_off)(void); - void (*reset)(void); -}; - -#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ diff --git a/include/linux/platform_data/brcmfmac.h b/include/linux/platform_data/brcmfmac.h new file mode 100644 index 000000000000..1d30bf278231 --- /dev/null +++ b/include/linux/platform_data/brcmfmac.h @@ -0,0 +1,185 @@ +/* + * Copyright (c) 201 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + + +#define BRCMFMAC_PDATA_NAME "brcmfmac" + +#define BRCMFMAC_COUNTRY_BUF_SZ 4 + + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions and data can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + */ + + +/** + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + */ + +/** + * enum brcmf_bus_type - Bus type identifier. Currently SDIO, USB and PCIE are + * supported. + */ +enum brcmf_bus_type { + BRCMF_BUSTYPE_SDIO, + BRCMF_BUSTYPE_USB, + BRCMF_BUSTYPE_PCIE +}; + + +/** + * struct brcmfmac_sdio_pd - SDIO Device specific platform data. + * + * @txglomsz: SDIO txglom size. Use 0 if default of driver is to be + * used. + * @drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is + * the target drive strength, the exact drive strength + * which will be used depends on the capabilities of the + * device. + * @oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having + * less overhead on interrupt processing an out of band + * interrupt can be used. If the HW supports this then + * enable this by setting this field to true and configure + * the oob related fields. + * @oob_irq_nr, + * @oob_irq_flags: the OOB interrupt information. The values are used for + * registering the irq using request_irq function. + * @broken_sg_support: flag for broken sg list support of SDIO host controller. + * Set this to true if the SDIO host controller has higher + * align requirement than 32 bytes for each scatterlist + * item. + * @sd_head_align: alignment requirement for start of data buffer. + * @sd_sgentry_align: length alignment requirement for each sg entry. + * @reset: This function can get called if the device communication + * broke down. This functionality is particularly useful in + * case of SDIO type devices. It is possible to reset a + * dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module + * specific and this function should return only after the + * complete reset has completed. + */ +struct brcmfmac_sdio_pd { + int txglomsz; + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + bool broken_sg_support; + unsigned short sd_head_align; + unsigned short sd_sgentry_align; + void (*reset)(void); +}; + +/** + * struct brcmfmac_pd_cc_entry - Struct for translating user space country code + * (iso3166) to firmware country code and + * revision. + * + * @iso3166: iso3166 alpha 2 country code string. + * @cc: firmware country code string. + * @rev: firmware country code revision. + */ +struct brcmfmac_pd_cc_entry { + char iso3166[BRCMFMAC_COUNTRY_BUF_SZ]; + char cc[BRCMFMAC_COUNTRY_BUF_SZ]; + s32 rev; +}; + +/** + * struct brcmfmac_pd_cc - Struct for translating country codes as set by user + * space to a country code and rev which can be used by + * firmware. + * + * @table_size: number of entries in table (> 0) + * @table: array of 1 or more elements with translation information. + */ +struct brcmfmac_pd_cc { + int table_size; + struct brcmfmac_pd_cc_entry table[0]; +}; + +/** + * struct brcmfmac_pd_device - Device specific platform data. (id/rev/bus_type) + * is the unique identifier of the device. + * + * @id: ID of the device for which this data is. In case of SDIO + * or PCIE this is the chipid as identified by chip.c In + * case of USB this is the chipid as identified by the + * device query. + * @rev: chip revision, see id. + * @bus_type: The type of bus. Some chipid/rev exist for different bus + * types. Each bus type has its own set of settings. + * @feature_disable: Bitmask of features to disable (override), See feature.c + * in brcmfmac for details. + * @country_codes: If available, pointer to struct for translating country + * codes. + * @bus: Bus specific (union) device settings. Currently only + * SDIO. + */ +struct brcmfmac_pd_device { + unsigned int id; + unsigned int rev; + enum brcmf_bus_type bus_type; + unsigned int feature_disable; + struct brcmfmac_pd_cc *country_codes; + union { + struct brcmfmac_sdio_pd sdio; + } bus; +}; + +/** + * struct brcmfmac_platform_data - BRCMFMAC specific platform data. + * + * @power_on: This function is called by the brcmfmac driver when the module + * gets loaded. This can be particularly useful for low power + * devices. The platform spcific routine may for example decide to + * power up the complete device. If there is no use-case for this + * function then provide NULL. + * @power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the devices can be powered down or + * otherwise be reset. So if an actual power_off is not supported + * but reset is supported by the devices then reset the devices + * when this function gets called. This can be particularly useful + * for low power devices. If there is no use-case for this + * function then provide NULL. + */ +struct brcmfmac_platform_data { + void (*power_on)(void); + void (*power_off)(void); + char *fw_alternative_path; + int device_count; + struct brcmfmac_pd_device devices[0]; +}; + + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ -- cgit v1.2.3 From 0607616d9311096bfd1c325c36ffbfa71ccd40ab Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 25 Feb 2016 15:33:46 +0100 Subject: serial: sa1100: make sa1100_register_uart_fns a function Calling sa1100_register_uart_fns() leaves the port structure unused when CONFIG_SERIAL_SA1100 is disabled, and we get a compiler warning about that: arch/arm/mach-sa1100/badge4.c:317:31: warning: 'badge4_port_fns' defined but not used [-Wunused-variable] static struct sa1100_port_fns badge4_port_fns __initdata = { This turns the two empty macros into empty inline functions, which has the same effect, but lets the compiler know that the variables are intentionally unused. Signed-off-by: Arnd Bergmann Acked-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/sa11x0-serial.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h index 4504d5d592f0..009e1d83fe39 100644 --- a/include/linux/platform_data/sa11x0-serial.h +++ b/include/linux/platform_data/sa11x0-serial.h @@ -26,8 +26,12 @@ struct sa1100_port_fns { void sa1100_register_uart_fns(struct sa1100_port_fns *fns); void sa1100_register_uart(int idx, int port); #else -#define sa1100_register_uart_fns(fns) do { } while (0) -#define sa1100_register_uart(idx,port) do { } while (0) +static inline void sa1100_register_uart_fns(struct sa1100_port_fns *fns) +{ +} +static inline void sa1100_register_uart(int idx, int port) +{ +} #endif #endif -- cgit v1.2.3 From 4774f400935fbb44a25f5e8fd5c5583431e28ac1 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 8 Mar 2016 10:34:04 -0800 Subject: Input: ad7879 - move header to platform_data directory The header file is used by the SPI and I2C variant of the driver. Therefore, move it to a more generic place under platform_data. Signed-off-by: Stefan Agner Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/ad7879.h | 41 ++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 include/linux/platform_data/ad7879.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ad7879.h b/include/linux/platform_data/ad7879.h new file mode 100644 index 000000000000..69e2e1fd2bc8 --- /dev/null +++ b/include/linux/platform_data/ad7879.h @@ -0,0 +1,41 @@ +/* linux/platform_data/ad7879.h */ + +/* Touchscreen characteristics vary between boards and models. The + * platform_data for the device's "struct device" holds this information. + * + * It's OK if the min/max values are zero. + */ +struct ad7879_platform_data { + u16 model; /* 7879 */ + u16 x_plate_ohms; + u16 x_min, x_max; + u16 y_min, y_max; + u16 pressure_min, pressure_max; + + bool swap_xy; /* swap x and y axes */ + + /* [0..255] 0=OFF Starts at 1=550us and goes + * all the way to 9.440ms in steps of 35us. + */ + u8 pen_down_acc_interval; + /* [0..15] Starts at 0=128us and goes all the + * way to 4.096ms in steps of 128us. + */ + u8 first_conversion_delay; + /* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */ + u8 acquisition_time; + /* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */ + u8 averaging; + /* [0..3] Perform X measurements 0 = OFF, + * 1 = 4, 2 = 8, 3 = 16 (median > averaging) + */ + u8 median; + /* 1 = AUX/VBAT/GPIO export GPIO to gpiolib + * requires CONFIG_GPIOLIB + */ + bool gpio_export; + /* identifies the first GPIO number handled by this chip; + * or, if negative, requests dynamic ID allocation. + */ + s32 gpio_base; +}; -- cgit v1.2.3 From 87aca73737e379f079993802d2c43606f7c5d26c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 21 Jan 2016 09:20:12 +0100 Subject: NFC: microread: Drop platform data header file Originally I only wanted to drop the unneeded inclusion of , but then noticed that struct microread_nfc_platform_data isn't actually used, and MICROREAD_DRIVER_NAME is redefined in the only file where it is used, so we can get rid of the header file and dead code altogether. Signed-off-by: Jean Delvare Cc: Lauro Ramos Venancio Cc: Aloisio Almeida Jr Signed-off-by: Samuel Ortiz --- include/linux/platform_data/microread.h | 35 --------------------------------- 1 file changed, 35 deletions(-) delete mode 100644 include/linux/platform_data/microread.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h deleted file mode 100644 index ca13992089b8..000000000000 --- a/include/linux/platform_data/microread.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Driver include for the Inside Secure microread NFC Chip. - * - * Copyright (C) 2011 Tieto Poland - * Copyright (C) 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _MICROREAD_H -#define _MICROREAD_H - -#include - -#define MICROREAD_DRIVER_NAME "microread" - -/* board config platform data for microread */ -struct microread_nfc_platform_data { - unsigned int rst_gpio; - unsigned int irq_gpio; - unsigned int ioh_gpio; -}; - -#endif /* _MICROREAD_H */ -- cgit v1.2.3