From 11a6e41c0ee503ffcb971d260bd07dc99b77f13a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 4 Sep 2017 14:53:13 +0200 Subject: phy: Return NULL if the phy is optional If we're trying to get a handle to an optional phy, then the phy framework being disabled shouldn't return an hard error. Instead, return NULL just like phy_optional_get does when there's no phy provided in the DT. Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I --- include/linux/phy/phy.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/phy') diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index e694d4008c4a..10888a717860 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -291,7 +291,7 @@ static inline struct phy *devm_phy_get(struct device *dev, const char *string) static inline struct phy *devm_phy_optional_get(struct device *dev, const char *string) { - return ERR_PTR(-ENOSYS); + return NULL; } static inline struct phy *devm_of_phy_get(struct device *dev, -- cgit v1.2.3 From fd3e4c98e6e7a12dc47ef98ee12c0c3c024b5ee9 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Thu, 12 Oct 2017 11:49:33 +0530 Subject: phy: Add UFS PHY modes UFS phy has two modes for each High speed generation. These modes are identified by two rates of operations - Rate A, and Rate B. Add these UFS phy modes to phy framework. Signed-off-by: Vivek Gautam Signed-off-by: Kishon Vijay Abraham I --- include/linux/phy/phy.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/phy') diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index 10888a717860..194d08174516 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -29,6 +29,8 @@ enum phy_mode { PHY_MODE_USB_OTG, PHY_MODE_SGMII, PHY_MODE_10GKR, + PHY_MODE_UFS_HS_A, + PHY_MODE_UFS_HS_B, }; /** -- cgit v1.2.3 From 052553af6a31b459adfdc6fd1eebced75de332fc Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Thu, 12 Oct 2017 11:49:36 +0530 Subject: ufs/phy: qcom: Refactor to use phy_init call Refactor ufs_qcom_power_up_sequence() to get rid of ugly exported phy APIs and use the phy_init() and phy_power_on() to do the phy initialization. Signed-off-by: Vivek Gautam Reviewed-by: Subhash Jadavani Signed-off-by: Kishon Vijay Abraham I --- include/linux/phy/phy-qcom-ufs.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux/phy') diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h index 35c070ea6ea3..0a2c18a9771d 100644 --- a/include/linux/phy/phy-qcom-ufs.h +++ b/include/linux/phy/phy-qcom-ufs.h @@ -31,10 +31,7 @@ void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy); */ void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy); -int ufs_qcom_phy_start_serdes(struct phy *phy); int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes); -int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B); -int ufs_qcom_phy_is_pcs_ready(struct phy *phy); void ufs_qcom_phy_save_controller_version(struct phy *phy, u8 major, u16 minor, u16 step); -- cgit v1.2.3 From 36914111e6829be36b23d1109214250b5ee1ee9c Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Mon, 9 Oct 2017 14:00:50 +0200 Subject: drivers: phy: add calibrate method Some quirky UDCs (like dwc3 on Exynos) need to have their phys calibrated e.g. for using super speed. This patch adds a new phy_calibrate() method. When the calibration should be used is dependent on actual chip. In case of dwc3 on Exynos the calibration must happen after usb_add_hcd() (while in host mode), because certain phy parameters like Tx LOS levels and boost levels need to be calibrated further post initialization of xHCI controller, to get SuperSpeed operations working. But an hcd must be prepared first in order to pass it to usb_add_hcd(), so, in particular, dwc3 registers must be available first, and in order for the latter to happen the phys must be initialized. This poses a chicken and egg problem if the calibration were to be performed in phy_init(). To break the circular dependency a separate method is added which can be called at a desired moment after phy intialization. Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Kishon Vijay Abraham I --- include/linux/phy/phy.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux/phy') diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index 194d08174516..4f8423a948d5 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -41,6 +41,7 @@ enum phy_mode { * @power_off: powering off the phy * @set_mode: set the mode of the phy * @reset: resetting the phy + * @calibrate: calibrate the phy * @owner: the module owner containing the ops */ struct phy_ops { @@ -50,6 +51,7 @@ struct phy_ops { int (*power_off)(struct phy *phy); int (*set_mode)(struct phy *phy, enum phy_mode mode); int (*reset)(struct phy *phy); + int (*calibrate)(struct phy *phy); struct module *owner; }; @@ -143,6 +145,7 @@ int phy_power_on(struct phy *phy); int phy_power_off(struct phy *phy); int phy_set_mode(struct phy *phy, enum phy_mode mode); int phy_reset(struct phy *phy); +int phy_calibrate(struct phy *phy); static inline int phy_get_bus_width(struct phy *phy) { return phy->attrs.bus_width; @@ -264,6 +267,13 @@ static inline int phy_reset(struct phy *phy) return -ENOSYS; } +static inline int phy_calibrate(struct phy *phy) +{ + if (!phy) + return 0; + return -ENOSYS; +} + static inline int phy_get_bus_width(struct phy *phy) { return -ENOSYS; -- cgit v1.2.3 From b24413180f5600bcb3bb70fbed5cf186b60864bd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 1 Nov 2017 15:07:57 +0100 Subject: License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman --- include/linux/phy/ulpi_phy.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/phy') diff --git a/include/linux/phy/ulpi_phy.h b/include/linux/phy/ulpi_phy.h index f2ebe490a4bc..7054b440347c 100644 --- a/include/linux/phy/ulpi_phy.h +++ b/include/linux/phy/ulpi_phy.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #include /** -- cgit v1.2.3