From e5e68930263377c6d4f6da0ff06f36b55d83a83f Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Wed, 6 Sep 2017 16:19:37 -0700 Subject: mm, memory_hotplug: display allowed zones in the preferred ordering Prior to commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") we used to allow to change the valid zone types of a memory block if it is adjacent to a different zone type. This fact was reflected in memoryNN/valid_zones by the ordering of printed zones. The first one was default (echo online > memoryNN/state) and the other one could be onlined explicitly by online_{movable,kernel}. This behavior was removed by the said patch and as such the ordering was not all that important. In most cases a kernel zone would be default anyway. The only exception is movable_node handled by "mm, memory_hotplug: support movable_node for hotpluggable nodes". Let's reintroduce this behavior again because later patch will remove the zone overlap restriction and so user will be allowed to online kernel resp. movable block regardless of its placement. Original behavior will then become significant again because it would be non-trivial for users to see what is the default zone to online into. Implementation is really simple. Pull out zone selection out of move_pfn_range into zone_for_pfn_range helper and use it in show_valid_zones to display the zone for default onlining and then both kernel and movable if they are allowed. Default online zone is not duplicated. Link: http://lkml.kernel.org/r/20170714121233.16861-2-mhocko@kernel.org Signed-off-by: Michal Hocko Acked-by: Joonsoo Kim Acked-by: Vlastimil Babka Cc: Mel Gorman Cc: Andrea Arcangeli Cc: Reza Arbab Cc: Yasuaki Ishimatsu Cc: Xishi Qiu Cc: Kani Toshimitsu Cc: Cc: Daniel Kiper Cc: Igor Mammedov Cc: Vitaly Kuznetsov Cc: Wei Yang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memory_hotplug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/memory_hotplug.h') diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index c8a5056a5ae0..5e6e4cc36ff4 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -319,6 +319,6 @@ extern struct page *sparse_decode_mem_map(unsigned long coded_mem_map, unsigned long pnum); extern bool allow_online_pfn_range(int nid, unsigned long pfn, unsigned long nr_pages, int online_type); -extern struct zone *default_zone_for_pfn(int nid, unsigned long pfn, +extern struct zone *zone_for_pfn_range(int online_type, int nid, unsigned start_pfn, unsigned long nr_pages); #endif /* __LINUX_MEMORY_HOTPLUG_H */ -- cgit v1.2.3 From 3072e413e305e353cd4654f8a57d953b66e85bf3 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 8 Sep 2017 16:11:39 -0700 Subject: mm/memory_hotplug: introduce add_pages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are new users of memory hotplug emerging. Some of them require different subset of arch_add_memory. There are some which only require allocation of struct pages without mapping those pages to the kernel address space. We currently have __add_pages for that purpose. But this is rather lowlevel and not very suitable for the code outside of the memory hotplug. E.g. x86_64 wants to update max_pfn which should be done by the caller. Introduce add_pages() which should care about those details if they are needed. Each architecture should define its implementation and select CONFIG_ARCH_HAS_ADD_PAGES. All others use the currently existing __add_pages. Link: http://lkml.kernel.org/r/20170817000548.32038-7-jglisse@redhat.com Signed-off-by: Michal Hocko Signed-off-by: Jérôme Glisse Acked-by: Balbir Singh Cc: Aneesh Kumar Cc: Benjamin Herrenschmidt Cc: Dan Williams Cc: David Nellans Cc: Evgeny Baskakov Cc: Johannes Weiner Cc: John Hubbard Cc: Kirill A. Shutemov Cc: Mark Hairgrove Cc: Paul E. McKenney Cc: Ross Zwisler Cc: Sherry Cheung Cc: Subhash Gutti Cc: Vladimir Davydov Cc: Bob Liu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memory_hotplug.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux/memory_hotplug.h') diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 5e6e4cc36ff4..0995e1a2b458 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -133,6 +133,17 @@ extern int __remove_pages(struct zone *zone, unsigned long start_pfn, extern int __add_pages(int nid, unsigned long start_pfn, unsigned long nr_pages, bool want_memblock); +#ifndef CONFIG_ARCH_HAS_ADD_PAGES +static inline int add_pages(int nid, unsigned long start_pfn, + unsigned long nr_pages, bool want_memblock) +{ + return __add_pages(nid, start_pfn, nr_pages, want_memblock); +} +#else /* ARCH_HAS_ADD_PAGES */ +int add_pages(int nid, unsigned long start_pfn, + unsigned long nr_pages, bool want_memblock); +#endif /* ARCH_HAS_ADD_PAGES */ + #ifdef CONFIG_NUMA extern int memory_add_physaddr_to_nid(u64 start); #else -- cgit v1.2.3 From b24413180f5600bcb3bb70fbed5cf186b60864bd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 1 Nov 2017 15:07:57 +0100 Subject: License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman --- include/linux/memory_hotplug.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/memory_hotplug.h') diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 0995e1a2b458..58e110aee7ab 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __LINUX_MEMORY_HOTPLUG_H #define __LINUX_MEMORY_HOTPLUG_H -- cgit v1.2.3