From 9d12eb98582fec2578d17e025b13740dcfb57d8e Mon Sep 17 00:00:00 2001 From: David Carlier Date: Tue, 17 Mar 2026 08:32:52 +0000 Subject: dmaengine: switchtec-dma: fix FIELD_GET misuse when programming SE threshold FIELD_GET(SE_THRESH_MASK, thresh) extracts bits [31:23] from thresh and right-shifts them, which is the inverse of the intended operation. Since thresh is derived from se_buf_len / 2 (at most 255), bits [31:23] are always zero, so the SE threshold is never actually programmed into the register. Use FIELD_PREP() instead to correctly left-shift thresh into bits [31:23] of the valid_en_se register, consistent with the FIELD_PREP usage for the perf tuner config just above. Fixes: 30eba9df76ad ("dmaengine: switchtec-dma: Implement hardware initialization and cleanup") Signed-off-by: David Carlier Review-by: Logan Gunthorpe Reviewed-by: Frank Li Link: https://patch.msgid.link/20260317083252.13224-1-devnexen@gmail.com Signed-off-by: Vinod Koul --- drivers/dma/switchtec_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/switchtec_dma.c b/drivers/dma/switchtec_dma.c index 3ef928640615..71d9868ce613 100644 --- a/drivers/dma/switchtec_dma.c +++ b/drivers/dma/switchtec_dma.c @@ -1099,7 +1099,7 @@ static int switchtec_dma_chan_init(struct switchtec_dma_dev *swdma_dev, dev_dbg(&pdev->dev, "Channel %d: SE buffer count %d\n", i, se_buf_len); thresh = se_buf_len / 2; - valid_en_se |= FIELD_GET(SE_THRESH_MASK, thresh); + valid_en_se |= FIELD_PREP(SE_THRESH_MASK, thresh); writel(valid_en_se, &swdma_chan->mmio_chan_fw->valid_en_se); /* request irqs */ -- cgit v1.2.3 From 859e02a369ab328a77dfcabf59562100e55f9c5c Mon Sep 17 00:00:00 2001 From: Sneh Mankad Date: Tue, 16 Jun 2026 17:24:53 +0530 Subject: pinctrl: qcom: Unconditionally mark gpio as wakeup enable GPIO interrupts that are wakeup capable need to be forwarded to wakeup capable parent irqchip. This is done via writing to it's wakeup_enable bit. Currently the bit is set only for PDC irqchip by checking skip_wake_irqs. skip_wake_irqs is set to differentiate between parent irqchips MPM and PDC. It is set when the parent irqchip is PDC to inform pinctrl about skipping the IRQ setting up at TLMM. However, the functionality to forward GPIO interrupts during SoC low power mode is needed regardless of which parent irqchip it is. Without the functionality it is impossible for MPM irqchip to detect the GPIO interrupt during SoC low power mode since for MPM irqchip the skip_wake_irqs is always false. Remove skip_wake_irqs condition when setting wakeup enable bit to allow forwarding GPIO interrupts for SoCs using MPM irqchip too. Fixes: 76b446f5b86e ("pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits") Signed-off-by: Sneh Mankad Reviewed-by: Maulik Shah Reviewed-by: Linus Walleij Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260616-enable_wakeup_capable_gpios-v3-1-fb59647d89cb@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/pinctrl/qcom/pinctrl-msm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index 11db6564c44d..fd0add4e71da 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -1240,12 +1240,12 @@ static int msm_gpio_irq_reqres(struct irq_data *d) /* * If the wakeup_enable bit is present and marked as available for the * requested GPIO, it should be enabled when the GPIO is marked as - * wake irq in order to allow the interrupt event to be transfered to - * the PDC HW. + * wake irq in order to allow the interrupt event to be transferred to + * the PDC/MPM HW. * While the name implies only the wakeup event, it's also required for * the interrupt event. */ - if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) { + if (g->intr_wakeup_present_bit) { u32 intr_cfg; raw_spin_lock_irqsave(&pctrl->lock, flags); @@ -1273,7 +1273,7 @@ static void msm_gpio_irq_relres(struct irq_data *d) unsigned long flags; /* Disable the wakeup_enable bit if it has been set in msm_gpio_irq_reqres() */ - if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) { + if (g->intr_wakeup_present_bit) { u32 intr_cfg; raw_spin_lock_irqsave(&pctrl->lock, flags); -- cgit v1.2.3 From 437a8d2aa1aa442c4a176fdf4700a9b3bb0c8794 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Fri, 26 Jun 2026 15:08:05 +0200 Subject: pinctrl: qcom: sc8280xp: Add missing wakeup entries for GPIO143/151 Pins 143 and 151 were not included in the PDC wakeup map. They are normally used for PCIe2A and PCIe3a PERST# respectively, so they're unlikely to be excercised in practice, but still add them for the sake of completeness. Fixes: c0e4c71a9e7c ("pinctrl: qcom: Introduce sc8280xp TLMM driver") Signed-off-by: Konrad Dybcio Link: https://patch.msgid.link/20260626-topic-8280_pinctrl_wakeup-v1-1-2ccb267148f5@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/pinctrl/qcom/pinctrl-sc8280xp.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-sc8280xp.c b/drivers/pinctrl/qcom/pinctrl-sc8280xp.c index 4056b9fa32f8..e018bd11626c 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc8280xp.c +++ b/drivers/pinctrl/qcom/pinctrl-sc8280xp.c @@ -1881,16 +1881,17 @@ static const struct msm_gpio_wakeirq_map sc8280xp_pdc_map[] = { { 126, 200 }, { 127, 225 }, { 128, 262 }, { 129, 201 }, { 130, 209 }, { 131, 173 }, { 132, 202 }, { 136, 210 }, { 138, 171 }, { 139, 226 }, { 140, 227 }, { 142, 228 }, - { 144, 229 }, { 145, 230 }, { 146, 231 }, { 148, 232 }, - { 149, 233 }, { 150, 234 }, { 152, 235 }, { 154, 212 }, - { 157, 213 }, { 161, 219 }, { 170, 236 }, { 171, 221 }, - { 174, 222 }, { 175, 237 }, { 176, 223 }, { 177, 170 }, - { 180, 238 }, { 181, 239 }, { 182, 240 }, { 183, 241 }, - { 184, 242 }, { 185, 243 }, { 190, 178 }, { 193, 184 }, - { 196, 185 }, { 198, 186 }, { 200, 174 }, { 201, 175 }, - { 205, 176 }, { 206, 177 }, { 208, 187 }, { 210, 198 }, - { 211, 199 }, { 212, 204 }, { 215, 205 }, { 220, 188 }, - { 221, 194 }, { 223, 195 }, { 225, 196 }, { 227, 197 }, + { 143, 261 }, { 144, 229 }, { 145, 230 }, { 146, 231 }, + { 148, 232 }, { 149, 233 }, { 150, 234 }, { 151, 264 }, + { 152, 235 }, { 154, 212 }, { 157, 213 }, { 161, 219 }, + { 170, 236 }, { 171, 221 }, { 174, 222 }, { 175, 237 }, + { 176, 223 }, { 177, 170 }, { 180, 238 }, { 181, 239 }, + { 182, 240 }, { 183, 241 }, { 184, 242 }, { 185, 243 }, + { 190, 178 }, { 193, 184 }, { 196, 185 }, { 198, 186 }, + { 200, 174 }, { 201, 175 }, { 205, 176 }, { 206, 177 }, + { 208, 187 }, { 210, 198 }, { 211, 199 }, { 212, 204 }, + { 215, 205 }, { 220, 188 }, { 221, 194 }, { 223, 195 }, + { 225, 196 }, { 227, 197 }, }; static struct msm_pinctrl_soc_data sc8280xp_pinctrl = { -- cgit v1.2.3 From ab1150115e68a46b687eb38c1ab92782018c9f2c Mon Sep 17 00:00:00 2001 From: Hongling Zeng Date: Wed, 1 Jul 2026 12:57:33 +0800 Subject: dmaengine: sun6i-dma: Fix reclaim descriptors while terminating DMA When terminating DMA transfers, active descriptors are not properly reclaimed. Only cyclic descriptors were handled, leaving non-cyclic descriptors and their LLI chains to be permanently leaked. Fix by using vchan_terminate_vdesc() which handles both cyclic and non-cyclic descriptors by adding them to desc_terminated queue for proper cleanup. Add pchan->desc != pchan->done check to prevent double-adding completed descriptors, which would corrupt the list. Fixes: 555859308723 ("dmaengine: sun6i: Add driver for the Allwinner A31 DMA controller") Signed-off-by: Hongling Zeng Acked-by: Jernej Skrabec Suggested-by: Frank Li Reviewed-by: Frank Li Link: https://patch.msgid.link/20260701045733.33654-1-zenghongling@kylinos.cn Signed-off-by: Vinod Koul --- drivers/dma/sun6i-dma.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c index a9a254dbf8cb..f47a326dd7ff 100644 --- a/drivers/dma/sun6i-dma.c +++ b/drivers/dma/sun6i-dma.c @@ -945,16 +945,13 @@ static int sun6i_dma_terminate_all(struct dma_chan *chan) spin_lock_irqsave(&vchan->vc.lock, flags); - if (vchan->cyclic) { - vchan->cyclic = false; - if (pchan && pchan->desc) { - struct virt_dma_desc *vd = &pchan->desc->vd; - struct virt_dma_chan *vc = &vchan->vc; + if (pchan && pchan->desc && pchan->desc != pchan->done) { + struct virt_dma_desc *vd = &pchan->desc->vd; - list_add_tail(&vd->node, &vc->desc_completed); - } + vchan_terminate_vdesc(vd); } + vchan->cyclic = false; vchan_get_all_descriptors(&vchan->vc, &head); if (pchan) { -- cgit v1.2.3 From 34db32102439d948e0c9aea060e48f979aae827d Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Thu, 18 Jun 2026 10:08:11 +0200 Subject: MAINTAINERS: Drop Karthikeyan Mitran from Mobiveil PCIe entry Karthikeyan's Mobiveil email address is now bouncing and there is no sign of him [1] willing to carry out maintainership duties for this driver. Drop him from the MAINTAINERS entry for Mobiveil PCIe. Link: https://lore.kernel.org/linux-pci/ahWB7yRchlW_KjEm@wunner.de Signed-off-by: Manivannan Sadhasivam Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Cc: Lukas Wunner Cc: Mitran Karthikeyan Link: https://patch.msgid.link/20260618080811.26337-1-manivannan.sadhasivam@oss.qualcomm.com --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 15011f5752a9..c20756e28d60 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20686,7 +20686,6 @@ F: include/linux/switchtec.h F: include/uapi/linux/switchtec_ioctl.h PCI DRIVER FOR MOBIVEIL PCIE IP -M: Karthikeyan Mitran M: Hou Zhiqiang L: linux-pci@vger.kernel.org S: Supported -- cgit v1.2.3 From ec2d428b2e32dd157de8f86a86dd85c5b2c8f45c Mon Sep 17 00:00:00 2001 From: Yuho Choi Date: Wed, 15 Apr 2026 16:54:52 -0400 Subject: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks. Fixes: 7c5dd23e57c1 ("dmaengine: idxd: fix wq conf_dev 'struct device' lifetime") Fixes: 75b911309060 ("dmaengine: idxd: fix engine conf_dev lifetime") Fixes: defe49f96012 ("dmaengine: idxd: fix group conf_dev lifetime") Signed-off-by: Yuho Choi Acked-by: Vinicius Costa Gomes Reviewed-by: Frank Li Link: https://patch.msgid.link/20260415205452.67155-1-dbgh9129@gmail.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/init.c | 36 +++++------------------------------- 1 file changed, 5 insertions(+), 31 deletions(-) diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c index f1cfc7790d95..4b827a329756 100644 --- a/drivers/dma/idxd/init.c +++ b/drivers/dma/idxd/init.c @@ -159,18 +159,12 @@ static void idxd_cleanup_interrupts(struct idxd_device *idxd) static void idxd_clean_wqs(struct idxd_device *idxd) { - struct idxd_wq *wq; struct device *conf_dev; int i; for (i = 0; i < idxd->max_wqs; i++) { - wq = idxd->wqs[i]; - if (idxd->hw.wq_cap.op_config) - bitmap_free(wq->opcap_bmap); - kfree(wq->wqcfg); - conf_dev = wq_confdev(wq); + conf_dev = wq_confdev(idxd->wqs[i]); put_device(conf_dev); - kfree(wq); } bitmap_free(idxd->wq_enable_map); kfree(idxd->wqs); @@ -212,7 +206,6 @@ static int idxd_setup_wqs(struct idxd_device *idxd) rc = dev_set_name(conf_dev, "wq%d.%d", idxd->id, wq->id); if (rc < 0) { put_device(conf_dev); - kfree(wq); goto err_unwind; } @@ -227,7 +220,6 @@ static int idxd_setup_wqs(struct idxd_device *idxd) wq->wqcfg = kzalloc_node(idxd->wqcfg_size, GFP_KERNEL, dev_to_node(dev)); if (!wq->wqcfg) { put_device(conf_dev); - kfree(wq); rc = -ENOMEM; goto err_unwind; } @@ -235,9 +227,7 @@ static int idxd_setup_wqs(struct idxd_device *idxd) if (idxd->hw.wq_cap.op_config) { wq->opcap_bmap = bitmap_zalloc(IDXD_MAX_OPCAP_BITS, GFP_KERNEL); if (!wq->opcap_bmap) { - kfree(wq->wqcfg); put_device(conf_dev); - kfree(wq); rc = -ENOMEM; goto err_unwind; } @@ -252,13 +242,8 @@ static int idxd_setup_wqs(struct idxd_device *idxd) err_unwind: while (--i >= 0) { - wq = idxd->wqs[i]; - if (idxd->hw.wq_cap.op_config) - bitmap_free(wq->opcap_bmap); - kfree(wq->wqcfg); - conf_dev = wq_confdev(wq); + conf_dev = wq_confdev(idxd->wqs[i]); put_device(conf_dev); - kfree(wq); } bitmap_free(idxd->wq_enable_map); @@ -270,15 +255,12 @@ err_free_wqs: static void idxd_clean_engines(struct idxd_device *idxd) { - struct idxd_engine *engine; struct device *conf_dev; int i; for (i = 0; i < idxd->max_engines; i++) { - engine = idxd->engines[i]; - conf_dev = engine_confdev(engine); + conf_dev = engine_confdev(idxd->engines[i]); put_device(conf_dev); - kfree(engine); } kfree(idxd->engines); } @@ -313,7 +295,6 @@ static int idxd_setup_engines(struct idxd_device *idxd) rc = dev_set_name(conf_dev, "engine%d.%d", idxd->id, engine->id); if (rc < 0) { put_device(conf_dev); - kfree(engine); goto err; } @@ -324,10 +305,8 @@ static int idxd_setup_engines(struct idxd_device *idxd) err: while (--i >= 0) { - engine = idxd->engines[i]; - conf_dev = engine_confdev(engine); + conf_dev = engine_confdev(idxd->engines[i]); put_device(conf_dev); - kfree(engine); } kfree(idxd->engines); @@ -336,13 +315,10 @@ static int idxd_setup_engines(struct idxd_device *idxd) static void idxd_clean_groups(struct idxd_device *idxd) { - struct idxd_group *group; int i; for (i = 0; i < idxd->max_groups; i++) { - group = idxd->groups[i]; - put_device(group_confdev(group)); - kfree(group); + put_device(group_confdev(idxd->groups[i])); } kfree(idxd->groups); } @@ -377,7 +353,6 @@ static int idxd_setup_groups(struct idxd_device *idxd) rc = dev_set_name(conf_dev, "group%d.%d", idxd->id, group->id); if (rc < 0) { put_device(conf_dev); - kfree(group); goto err; } @@ -402,7 +377,6 @@ static int idxd_setup_groups(struct idxd_device *idxd) while (--i >= 0) { group = idxd->groups[i]; put_device(group_confdev(group)); - kfree(group); } kfree(idxd->groups); -- cgit v1.2.3 From ee1d7274102285d78a53161fc705a8d8cd40b066 Mon Sep 17 00:00:00 2001 From: Yuho Choi Date: Mon, 25 May 2026 10:15:50 -0400 Subject: dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open() The failed_dev_add and failed_dev_name paths drop the file-device reference while wq->wq_lock is still held. If put_device(fdev) drops the last reference, idxd_file_dev_release() runs synchronously and tries to take wq->wq_lock again, deadlocking. Those paths also fall through into the later ctx cleanup labels even though idxd_file_dev_release() owns that cleanup and frees ctx. This can make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context. Move idxd_wq_get() before file-device setup can fail, since the release callback always calls idxd_wq_put(). Then unlock wq->wq_lock before put_device(fdev) and return directly from the file-device setup failure path, leaving ctx cleanup to the release callback. Fixes: e6fd6d7e5f0fe ("dmaengine: idxd: add a device to represent the file opened") Signed-off-by: Yuho Choi Reviewed-by: Dave Jiang Acked-by: Vinicius Costa Gomes Link: https://patch.msgid.link/20260525141550.1385581-1-dbgh9129@gmail.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/cdev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/dma/idxd/cdev.c b/drivers/dma/idxd/cdev.c index 0366c7cf3502..82b07cf942ef 100644 --- a/drivers/dma/idxd/cdev.c +++ b/drivers/dma/idxd/cdev.c @@ -288,6 +288,7 @@ static int idxd_cdev_open(struct inode *inode, struct file *filp) fdev->parent = cdev_dev(idxd_cdev); fdev->bus = &dsa_bus_type; fdev->type = &idxd_cdev_file_type; + idxd_wq_get(wq); rc = dev_set_name(fdev, "file%d", ctx->id); if (rc < 0) { @@ -301,13 +302,14 @@ static int idxd_cdev_open(struct inode *inode, struct file *filp) goto failed_dev_add; } - idxd_wq_get(wq); mutex_unlock(&wq->wq_lock); return 0; failed_dev_add: failed_dev_name: + mutex_unlock(&wq->wq_lock); put_device(fdev); + return rc; failed_ida: failed_set_pasid: if (device_user_pasid_enabled(idxd)) -- cgit v1.2.3 From 867621ba203027338b525af6729719c544135336 Mon Sep 17 00:00:00 2001 From: Md Sadre Alam Date: Mon, 15 Jun 2026 11:39:08 +0530 Subject: dmaengine: qcom: bam_dma: Fix command element mask field for BAM v1.6.0+ BAM version 1.6.0 and later changed the behavior of the mask field in command elements for read operations. In older BAM versions, or prior implementation assumptions, the mask field was effectively ignored for read commands. However, starting from BAM v1.6.0, the mask field for read commands is repurposed to carry the upper 4 bits of the destination address, enabling support for 36-bit addressing. For write commands, the mask field continues to function as a traditional write mask. The current driver sets mask = 0xffffffff for all command elements. While this works for write operations, it breaks read operations on BAM v1.6.0+ hardware. In such cases, the hardware interprets the upper address bits as 0xf, resulting in an invalid destination address (0xf_xxxxxxxx instead of 0x0_xxxxxxxx). This leads to failures such as NAND enumeration issues observed on platforms like IPQ5424. Fix this by assigning the mask field based on command type: - For read commands: set mask = 0 (upper address bits = 0) - For write commands: retain mask = 0xffffffff Also update the bam_cmd_element structure documentation to reflect the dual purpose of the mask field across BAM versions. This ensures correct behavior on BAM v1.6.0+ while maintaining backward compatibility with older hardware. Fixes: dfebb055f73a2 ("dmaengine: qcom: bam_dma: wrapper functions for command descriptor") Tested-by: Lakshmi Sowjanya D Signed-off-by: Md Sadre Alam Reviewed-by: Frank Li Reviewed-by: Dmitry Baryshkov Cc: stable@vger.kernel.org Signed-off-by: Varadarajan Narayanan Link: https://patch.msgid.link/20260615060908.1263171-1-varadarajan.narayanan@oss.qualcomm.com Signed-off-by: Vinod Koul --- include/linux/dma/qcom_bam_dma.h | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/include/linux/dma/qcom_bam_dma.h b/include/linux/dma/qcom_bam_dma.h index 68fc0e643b1b..d9d07a9ab313 100644 --- a/include/linux/dma/qcom_bam_dma.h +++ b/include/linux/dma/qcom_bam_dma.h @@ -13,9 +13,12 @@ * supported by BAM DMA Engine. * * @cmd_and_addr - upper 8 bits command and lower 24 bits register address. - * @data - for write command: content to be written into peripheral register. - * for read command: dest addr to write peripheral register value. - * @mask - register mask. + * @data - For write command: content to be written into peripheral register. + * For read command: lower 32 bits of destination address. + * @mask - For write command: register write mask. + * For read command on BAM v1.6.0+: upper 4 bits of destination address. + * For read command on BAM < v1.6.0: ignored by hardware. + * Setting to 0 ensures 32-bit addressing compatibility. * @reserved - for future usage. * */ @@ -42,6 +45,10 @@ enum bam_command_type { * @addr: target address * @cmd: BAM command * @data: actual data for write and dest addr for read in le32 + * + * For BAM v1.6.0+, the mask field behavior depends on command type: + * - Write commands: mask = write mask (typically 0xffffffff) + * - Read commands: mask = upper 4 bits of destination address (0 for 32-bit) */ static inline void bam_prep_ce_le32(struct bam_cmd_element *bam_ce, u32 addr, @@ -50,7 +57,11 @@ bam_prep_ce_le32(struct bam_cmd_element *bam_ce, u32 addr, bam_ce->cmd_and_addr = cpu_to_le32((addr & 0xffffff) | ((cmd & 0xff) << 24)); bam_ce->data = data; - bam_ce->mask = cpu_to_le32(0xffffffff); + if (cmd == BAM_READ_COMMAND) + bam_ce->mask = cpu_to_le32(0x0); /* 32-bit addressing */ + else + bam_ce->mask = cpu_to_le32(0xffffffff); /* Write mask */ + bam_ce->reserved = 0; } /* @@ -60,7 +71,7 @@ bam_prep_ce_le32(struct bam_cmd_element *bam_ce, u32 addr, * @bam_ce: BAM command element * @addr: target address * @cmd: BAM command - * @data: actual data for write and dest addr for read + * @data: actual data for write and destination address for read */ static inline void bam_prep_ce(struct bam_cmd_element *bam_ce, u32 addr, -- cgit v1.2.3 From ba5c0f28a26e7d9be1e0997f8920dd638e2782fd Mon Sep 17 00:00:00 2001 From: Peiyang He Date: Fri, 10 Jul 2026 20:29:52 +0800 Subject: iommufd: Fix wrong hwpt passed to iommufd_auto_response_faults on replace iommufd_hwpt_replace_device() calls: iommufd_auto_response_faults(hwpt, old_handle); passing the *new* hwpt together with the handle of the device's *old* domain. This should be a parameter mismatch: 1. Semantically, iommufd_auto_response_faults(x, handle) scans x->fault's deliver list and response xarray for groups matching "handle". A group is queued under the hwpt that was attached at fault-delivery time. old_handle is fetched *before* the domain switch, so its group lives on old->fault, not on the new hwpt->fault. 2. Historically, the first argument was "old". The routine was introduced by commit b7d8833677ba ("iommufd: Fault-capable hwpt attach/detach/replace") as __fault_domain_replace_dev() in fault.c, correctly calling iommufd_auto_response_faults(old, curr). Commit fb21b1568ada ("iommufd: Make attach_handle generic than fault specific") moved this into iommufd_hwpt_replace_device() in device.c and swapped it to "hwpt". This should be a refactor regression, not an intentional change. Fix this by passing "old" instead. Link: https://patch.msgid.link/r/9D652384339C69D5+20260710122952.885325-1-peiyang_he@smail.nju.edu.cn Fixes: fb21b1568ada ("iommufd: Make attach_handle generic than fault specific") Cc: stable@vger.kernel.org Signed-off-by: Peiyang He Reviewed-by: Kevin Tian Signed-off-by: Jason Gunthorpe --- drivers/iommu/iommufd/device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/iommufd/device.c b/drivers/iommu/iommufd/device.c index 170a7005f0bc..2895e5370910 100644 --- a/drivers/iommu/iommufd/device.c +++ b/drivers/iommu/iommufd/device.c @@ -589,7 +589,7 @@ static int iommufd_hwpt_replace_device(struct iommufd_device *idev, if (rc) goto out_free_handle; - iommufd_auto_response_faults(hwpt, old_handle); + iommufd_auto_response_faults(old, old_handle); kfree(old_handle); return 0; -- cgit v1.2.3 From 5f3fc0ad9a41883a62098359b9fdbe4257f20e53 Mon Sep 17 00:00:00 2001 From: Peiyang He Date: Thu, 9 Jul 2026 13:08:00 +0800 Subject: iommufd: Reject DMABUF pages from the access pin path DMABUF pages are not supported for iommufd access pinning. iommufd_access_pin_pages() returns struct page pointers for in-kernel CPU access, but DMABUF-backed iopt_pages do not carry a userspace address that can be passed to the GUP path. iopt_pages_rw_access() already rejects IOPT_ADDRESS_DMABUF before doing CPU access. Apply the same rejection to iopt_area_add_access() before it takes pages->mutex and calls iopt_pages_fill_xarray(). Otherwise a DMABUF-backed iopt_pages can reach the hole-fill path, where pfn_reader_user_pin() interprets the union as uptr and calls pin_user_pages_fast()/pin_user_pages_remote(). This fix also avoids the lockdep warning reported from that path, where pages_dmabuf_mutex_key is held while gup_fast_fallback() may acquire mmap_lock. Link: https://patch.msgid.link/r/CD68F549BF3761B7+20260709050800.520607-1-peiyang_he@smail.nju.edu.cn Reported-by: Peiyang He Closes: https://lore.kernel.org/all/E8540D7D05768C91+8b2ef227-3368-494e-909d-7b28e1489dfb@smail.nju.edu.cn/ Fixes: 71db84a092c3 ("iommufd: Add DMABUF to iopt_pages") Cc: stable@vger.kernel.org Tested-by: Peiyang He Signed-off-by: Peiyang He Reviewed-by: Kevin Tian Signed-off-by: Jason Gunthorpe --- drivers/iommu/iommufd/pages.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/iommu/iommufd/pages.c b/drivers/iommu/iommufd/pages.c index 03c8379bbc34..404f31d8f729 100644 --- a/drivers/iommu/iommufd/pages.c +++ b/drivers/iommu/iommufd/pages.c @@ -2451,6 +2451,9 @@ int iopt_area_add_access(struct iopt_area *area, unsigned long start_index, if ((flags & IOMMUFD_ACCESS_RW_WRITE) && !pages->writable) return -EPERM; + if (iopt_is_dmabuf(pages)) + return -EINVAL; + mutex_lock(&pages->mutex); access = iopt_pages_get_exact_access(pages, start_index, last_index); if (access) { -- cgit v1.2.3 From 339bd11591593ab7ce88136ab7fd01ef3813b724 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Sun, 5 Jul 2026 22:36:09 -0700 Subject: iommufd/viommu: Release the igroup lock on the vdevice_size error path iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the driver's vdevice_size against the core structure size with a WARN_ON_ONCE. On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it skips the mutex_unlock(), leaving the igroup lock held and deadlocking the next vDEVICE operation on that group. Jump to out_unlock_igroup instead. Fixes: ed42eee797ff3 ("iommufd/viommu: Add driver-defined vDEVICE support") Link: https://patch.msgid.link/r/e903f775d491296a525097e2a90b3eb6a47cf2ef.1783311134.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Kevin Tian Assisted-by: Claude:claude-opus-4-8 Reviewed-by: Pranjal Shrivastava Signed-off-by: Nicolin Chen Signed-off-by: Jason Gunthorpe --- drivers/iommu/iommufd/viommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/iommufd/viommu.c b/drivers/iommu/iommufd/viommu.c index 4081deda9b33..0c12c7e352a1 100644 --- a/drivers/iommu/iommufd/viommu.c +++ b/drivers/iommu/iommufd/viommu.c @@ -189,7 +189,7 @@ int iommufd_vdevice_alloc_ioctl(struct iommufd_ucmd *ucmd) if (WARN_ON_ONCE(viommu->ops->vdevice_size < vdev_size || !viommu->ops->vdevice_init)) { rc = -EOPNOTSUPP; - goto out_put_idev; + goto out_unlock_igroup; } vdev_size = viommu->ops->vdevice_size; } -- cgit v1.2.3 From 9be311cfbe6154da146a7408e0d5e518a9321ed3 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Sun, 5 Jul 2026 22:36:10 -0700 Subject: iommufd/viommu: Publish a vDEVICE only after vdevice_init() succeeds iommufd_vdevice_alloc_ioctl() adds the vDEVICE to the viommu->vdevs xarray with xa_cmpxchg() before the driver's vdevice_init() op runs. That op is where a driver validates the device and may reject it, but the xarray entry is already live by then: a concurrent IOMMU_HWPT_INVALIDATE can look it up with iommufd_viommu_find_dev() and run the driver invalidation path against a device that vdevice_init() would have refused. Reserve the index with xa_insert(): it stores a zero entry that reads back as NULL, and returns -EBUSY on a duplicate virt_id. Run vdevice_init() and store the vDEVICE pointer only once it succeeds. A failed vdevice_init() releases the reservation, so lookups observe the vDEVICE only after it is fully initialized and accepted. Fixes: ed42eee797ff3 ("iommufd/viommu: Add driver-defined vDEVICE support") Link: https://patch.msgid.link/r/1e05999347f4bf583edbc6a1312c857d5548708c.1783311134.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Kevin Tian Assisted-by: Claude:claude-opus-4-8 Reviewed-by: Pranjal Shrivastava Signed-off-by: Nicolin Chen Signed-off-by: Jason Gunthorpe --- drivers/iommu/iommufd/viommu.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/iommufd/viommu.c b/drivers/iommu/iommufd/viommu.c index 0c12c7e352a1..fc13cf4737ea 100644 --- a/drivers/iommu/iommufd/viommu.c +++ b/drivers/iommu/iommufd/viommu.c @@ -143,7 +143,7 @@ void iommufd_vdevice_destroy(struct iommufd_object *obj) int iommufd_vdevice_alloc_ioctl(struct iommufd_ucmd *ucmd) { struct iommu_vdevice_alloc *cmd = ucmd->cmd; - struct iommufd_vdevice *vdev, *curr; + struct iommufd_vdevice *vdev; size_t vdev_size = sizeof(*vdev); struct iommufd_viommu *viommu; struct iommufd_device *idev; @@ -218,18 +218,28 @@ int iommufd_vdevice_alloc_ioctl(struct iommufd_ucmd *ucmd) */ idev->vdev = vdev; - curr = xa_cmpxchg(&viommu->vdevs, virt_id, NULL, vdev, GFP_KERNEL); - if (curr) { - rc = xa_err(curr) ?: -EEXIST; + /* + * Reserve the slot with a zero entry (reads back as NULL) until the + * vdevice_init() op accepts the vDEVICE. Only the xa_* helpers hide a + * reserved entry, so never use a raw xas_* iterator on this xarray. + */ + rc = xa_insert(&viommu->vdevs, virt_id, NULL, GFP_KERNEL); + if (rc) { + if (rc == -EBUSY) + rc = -EEXIST; goto out_abort; } if (viommu->ops && viommu->ops->vdevice_init) { rc = viommu->ops->vdevice_init(vdev); - if (rc) + if (rc) { + xa_release(&viommu->vdevs, virt_id); goto out_abort; + } } + xa_store(&viommu->vdevs, virt_id, vdev, GFP_KERNEL); + cmd->out_vdevice_id = vdev->obj.id; rc = iommufd_ucmd_respond(ucmd, sizeof(*cmd)); if (rc) -- cgit v1.2.3 From c3b8ee84a965058b41275069d4696f37a8b14bf6 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Sun, 5 Jul 2026 22:36:11 -0700 Subject: iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID taken from master->streams[0], assuming a device has exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP when master->num_streams is not one, rather than mapping it silently. Fixes: d68beb276ba26 ("iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object") Link: https://patch.msgid.link/r/b15f2b73520f389f3f57881da2f040e7bdc18876.1783311134.git.nicolinc@nvidia.com Reviewed-by: Kevin Tian Assisted-by: Claude:claude-opus-4-8 Reviewed-by: Pranjal Shrivastava Signed-off-by: Nicolin Chen Signed-off-by: Jason Gunthorpe --- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-iommufd.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-iommufd.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-iommufd.c index 1e9f7d2de344..85ebfdb3d2a7 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-iommufd.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-iommufd.c @@ -297,6 +297,20 @@ unlock: return ret; } +static int arm_vsmmu_vdevice_init(struct iommufd_vdevice *vdev) +{ + struct device *dev = iommufd_vdevice_to_device(vdev); + struct arm_smmu_master *master = dev_iommu_priv_get(dev); + + /* + * arm_vsmmu_vsid_to_sid() maps a vSID to master->streams[0] alone, so + * more streams would leave the rest stale and none reads out of bounds. + */ + if (master->num_streams != 1) + return -EOPNOTSUPP; + return 0; +} + /* This is basically iommu_viommu_arm_smmuv3_invalidate in u64 for conversion */ struct arm_vsmmu_invalidation_cmd { union { @@ -403,6 +417,7 @@ out: static const struct iommufd_viommu_ops arm_vsmmu_ops = { .alloc_domain_nested = arm_vsmmu_alloc_domain_nested, .cache_invalidate = arm_vsmmu_cache_invalidate, + .vdevice_init = arm_vsmmu_vdevice_init, }; size_t arm_smmu_get_viommu_size(struct device *dev, -- cgit v1.2.3 From 7a7baebd9f23ba4f24796775472b2fd00dcd95d9 Mon Sep 17 00:00:00 2001 From: Abdun Nihaal Date: Wed, 15 Jul 2026 13:23:08 +0530 Subject: gpio: sloppy-logic-analyzer: Fix memory leak in gpio_la_poll_probe() The memory allocated for priv->blob.data is not freed in the error paths that follow the fops_buf_size_set() call in gpio_la_poll_probe(), as well as in the remove function. Fix that by using device managed action to free the memory on remove. Fixes: 7828b7bbbf20 ("gpio: add sloppy logic analyzer using polling") Signed-off-by: Abdun Nihaal Reviewed-by: Wolfram Sang Link: https://patch.msgid.link/20260715075311.527753-1-nihaal@cse.iitm.ac.in Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-sloppy-logic-analyzer.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpio/gpio-sloppy-logic-analyzer.c b/drivers/gpio/gpio-sloppy-logic-analyzer.c index 2bbd308ca08e..aa23b5779802 100644 --- a/drivers/gpio/gpio-sloppy-logic-analyzer.c +++ b/drivers/gpio/gpio-sloppy-logic-analyzer.c @@ -160,6 +160,13 @@ static int fops_buf_size_get(void *data, u64 *val) return 0; } +static void fops_buf_release(void *data) +{ + struct gpio_la_poll_priv *priv = data; + + vfree(priv->blob.data); +} + static int fops_buf_size_set(void *data, u64 val) { struct gpio_la_poll_priv *priv = data; @@ -238,6 +245,9 @@ static int gpio_la_poll_probe(struct platform_device *pdev) return ret; fops_buf_size_set(priv, GPIO_LA_DEFAULT_BUF_SIZE); + ret = devm_add_action_or_reset(dev, fops_buf_release, priv); + if (ret) + return ret; priv->descs = devm_gpiod_get_array(dev, "probe", GPIOD_IN); if (IS_ERR(priv->descs)) -- cgit v1.2.3 From e1cc8fa0fb9e5112d15f2c310b68ac316981c06c Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Tue, 14 Jul 2026 00:30:53 +0100 Subject: gpiolib: tolerate gpio-hogs lacking a hogging state Commit d1d564ec4992 ("gpio: move hogs into GPIO core") made gpiochip_add_hog() return -EINVAL for hog nodes lacking any of the 'input', 'output-low' or 'output-high' properties. The error is propagated by gpiochip_hog_lines() and fails registration of the whole GPIO chip. The previous OF-specific implementation tolerated such nodes: of_parse_own_gpio() warned "no hogging state specified, bailing out" and of_gpiochip_add_hog() stopped processing the node without failing chip registration. Some boards deliberately ship hog nodes without a hogging state in their base devicetree and supply the state via overlay, e.g. the PCIe slot key selection hogs on the BananaPi R4 Pro added in commit e309fa232d12 ("arm64: dts: mediatek: mt7988a-bpi-r4pro: rework pcie gpio-hog handling"), as the polarity set in the base devicetree could not be overridden from an overlay. Booting such a board without an overlay applied now fails to register the gpiochip. On the BananaPi R4 Pro this means the MT7988A pinctrl device fails to probe, all peripherals including the console UART defer forever, and the board finally hangs when clk_disable_unused() gates the clocks of the UART still in use by earlycon: gpiochip_add_data_with_key: GPIOs 512..595 (pinctrl_moore) failed to register, -22 mt7988-pinctrl 1001f000.pinctrl: error -EINVAL: Failed to add gpio_chip ... clk: Disabling unused clocks (hangs) Restore the previous behaviour by warning about hog nodes lacking a hogging state and skipping them instead of failing the registration of the whole GPIO chip. Fixes: d1d564ec4992 ("gpio: move hogs into GPIO core") Cc: stable@vger.kernel.org Signed-off-by: Daniel Golle Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/4c67cf0839ccf57db35a826df6d8fc779531509a.1783974733.git.daniel@makrotopia.org Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index e5fb60111151..c433a095907f 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -999,14 +999,17 @@ int gpiochip_add_hog(struct gpio_chip *gc, struct fwnode_handle *fwnode) if (ret < 0) return ret; - if (fwnode_property_present(fwnode, "input")) + if (fwnode_property_present(fwnode, "input")) { dflags |= GPIOD_IN; - else if (fwnode_property_present(fwnode, "output-low")) + } else if (fwnode_property_present(fwnode, "output-low")) { dflags |= GPIOD_OUT_LOW; - else if (fwnode_property_present(fwnode, "output-high")) + } else if (fwnode_property_present(fwnode, "output-high")) { dflags |= GPIOD_OUT_HIGH; - else - return -EINVAL; + } else { + gpiochip_warn(gc, "%pfwP: no hogging state specified, bailing out\n", + fwnode); + return 0; + } fwnode_property_read_string(fwnode, "line-name", &name); -- cgit v1.2.3 From c1f3e770eec26d6f96dd6d2ea30555ba7c09a244 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Tue, 23 Jun 2026 13:23:46 -0700 Subject: fortify: Disable -Wstringop-overread in tests clang recently added support for -Wstringop-overread [1], which is on by default like -Wfortify-source. This breaks the usage of -Werror in the fortify tests, resulting in the following false positive warnings in the kernel build: warning: unsafe memcmp() usage lacked '__read_overflow2' warning in lib/test_fortify/read_overflow2-memcmp.c warning: unsafe memcmp() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memcmp.c warning: unsafe memchr() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memchr.c Examining the fortify test logs shows a warning like the following in each of the failed logs: In file included from lib/test_fortify/read_overflow2-memcmp.c:5: lib/test_fortify/test_fortify.h:34:2: error: 'memcmp' reading 17 bytes from a region of size 16 [-Werror,-Wstringop-overread] 34 | TEST; | ^ lib/test_fortify/read_overflow2-memcmp.c:3:2: note: expanded from macro 'TEST' 3 | memcmp(large, small, sizeof(small) + 1) | ^ 1 error generated. Disable -Wstringop-overread for the fortify tests, as it defeats the purpose of testing the Linux specific implementation of fortify, like -Wfortify-source. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/2168 Link: https://github.com/llvm/llvm-project/commit/86f2e71cb8d165b59ad31a442b2391e23826133e [1] Signed-off-by: Nathan Chancellor Link: https://patch.msgid.link/20260623-fix-test_fortify-for-clang-stringop-overread-v1-1-15ee8342a953@kernel.org Signed-off-by: Kees Cook --- lib/test_fortify/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/test_fortify/Makefile b/lib/test_fortify/Makefile index 399cae880e1d..44cd5df41a81 100644 --- a/lib/test_fortify/Makefile +++ b/lib/test_fortify/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 ccflags-y := $(call cc-disable-warning,fortify-source) +ccflags-y += $(call cc-disable-warning,stringop-overread) quiet_cmd_test_fortify = TEST $@ cmd_test_fortify = $(CONFIG_SHELL) $(src)/test_fortify.sh \ -- cgit v1.2.3 From b3a7aa9c0020ae549a0d4964867ff66d2bd61709 Mon Sep 17 00:00:00 2001 From: Haofeng Li Date: Wed, 15 Jul 2026 16:02:10 +0800 Subject: selftests/lkdtm: rename STACKLEAK_ERASING to KSTACK_ERASE Commit 57fbad15c2ee ("stackleak: Rename STACKLEAK to KSTACK_ERASE") renamed the LKDTM crash type and selftest configuration but missed the entry in tests.txt. As a result, the selftest generates STACKLEAK_ERASING.sh, which run.sh skips because the LKDTM DIRECT trigger only exposes KSTACK_ERASE. Rename the test entry so the generated runner uses the registered crash type. Fixes: 57fbad15c2ee ("stackleak: Rename STACKLEAK to KSTACK_ERASE") Signed-off-by: Haofeng Li Link: https://patch.msgid.link/tencent_CD80B5F746B6AABD68AF3F1097AD02C96F05@qq.com Signed-off-by: Kees Cook --- tools/testing/selftests/lkdtm/tests.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/lkdtm/tests.txt b/tools/testing/selftests/lkdtm/tests.txt index d8180bbe31e8..bec57a02913a 100644 --- a/tools/testing/selftests/lkdtm/tests.txt +++ b/tools/testing/selftests/lkdtm/tests.txt @@ -78,7 +78,7 @@ USERCOPY_STACK_FRAME_TO USERCOPY_STACK_FRAME_FROM USERCOPY_STACK_BEYOND USERCOPY_KERNEL -STACKLEAK_ERASING OK: the rest of the thread stack is properly erased +KSTACK_ERASE OK: the rest of the thread stack is properly erased CFI_FORWARD_PROTO CFI_BACKWARD call trace:|ok: control flow unchanged FORTIFY_STRSCPY detected buffer overflow -- cgit v1.2.3 From 3421b9b056a6576d0ebac1030eafb48ad0544092 Mon Sep 17 00:00:00 2001 From: Kuan-Ying Lee Date: Wed, 15 Jul 2026 13:35:52 +0800 Subject: selftests/seccomp: Fix pointer type mismatch build error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We hit the following build error while running the seccomp selftests in our testing. CC seccomp_bpf seccomp_bpf.c: In function ‘UPROBE_setup’: seccomp_bpf.c:5175:74: error: pointer type mismatch in conditional expression [-Wincompatible-pointer-types] 5175 | offset = get_uprobe_offset(variant->uretprobe ? probed_uretprobe : probed_uprobe); | ^ seccomp_bpf.c:5175:57: note: first expression has type ‘int (*)(void)’ 5175 | offset = get_uprobe_offset(variant->uretprobe ? probed_uretprobe : probed_uprobe); | ^~~~~~~~~~~~~~~~ seccomp_bpf.c:5175:76: note: second expression has type ‘int (__attribute__((nocf_check)) *)(void)’ 5175 | offset = get_uprobe_offset(variant->uretprobe ? probed_uretprobe : probed_uprobe); | ^~~~~~~~~~~~~ get_uprobe_offset() takes a 'const void *' argument, so cast both operands to 'void *'. Fixes: 9ffc7a635c35 ("selftests/seccomp: validate uprobe syscall passes through seccomp") Signed-off-by: Kuan-Ying Lee Acked-by: Jiri Olsa Link: https://patch.msgid.link/20260715053559.28535-1-kuan-ying.lee@canonical.com Signed-off-by: Kees Cook --- tools/testing/selftests/seccomp/seccomp_bpf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index 358b6c65e120..0622bc2acad4 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -5178,7 +5178,8 @@ FIXTURE_SETUP(UPROBE) ASSERT_GE(bit, 0); } - offset = get_uprobe_offset(variant->uretprobe ? probed_uretprobe : probed_uprobe); + offset = get_uprobe_offset(variant->uretprobe ? (void *)probed_uretprobe + : (void *)probed_uprobe); ASSERT_GE(offset, 0); if (variant->uretprobe) -- cgit v1.2.3 From 9dc325327babe7f159e84cbe9380a45342da0585 Mon Sep 17 00:00:00 2001 From: Mark Tomlinson Date: Thu, 9 Jul 2026 16:51:16 +1200 Subject: gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock Locking is disabled in the regmap config as this driver uses its own lock. This means that all calls to regmap functions (read or write) must hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do this, and it was therefore possible that multiple threads could cause an incorrect register to be read/written. A previous patch partly fixed this, but only protected the write to the interrupt mask register, and not the read from the direction register. Fixes: bfc6444b57dc ("gpio: pca953x: fix pca953x_irq_bus_sync_unlock race") Cc: stable@vger.kernel.org Signed-off-by: Mark Tomlinson Link: https://patch.msgid.link/20260709045116.2304246-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pca953x.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index f6b870b7b352..e03bf1b12091 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -604,20 +604,28 @@ static int pca953x_read_regs(struct pca953x_chip *chip, int reg, unsigned long * return 0; } -static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off) +static int pca953x_gpio_direction_input_unlocked(struct gpio_chip *gc, + unsigned int off) { struct pca953x_chip *chip = gpiochip_get_data(gc); u8 dirreg = chip->recalc_addr(chip, chip->regs->direction, off); u8 bit = pca953x_get_bit_mask(chip, off); - guard(mutex)(&chip->i2c_lock); - if (PCA_CHIP_TYPE(chip->driver_data) == TCA6418_TYPE) return regmap_update_bits(chip->regmap, dirreg, bit, 0); return regmap_update_bits(chip->regmap, dirreg, bit, bit); } +static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned int off) +{ + struct pca953x_chip *chip = gpiochip_get_data(gc); + + guard(mutex)(&chip->i2c_lock); + + return pca953x_gpio_direction_input_unlocked(gc, off); +} + static int pca953x_gpio_direction_output(struct gpio_chip *gc, unsigned off, int val) { @@ -855,9 +863,10 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d) DECLARE_BITMAP(reg_direction, MAX_LINE); int level; + guard(mutex)(&chip->i2c_lock); + if (chip->driver_data & PCA_PCAL) { DECLARE_BITMAP(latched_inputs, MAX_LINE); - guard(mutex)(&chip->i2c_lock); /* Enable latch on edge-triggered interrupt-enabled inputs */ bitmap_or(latched_inputs, chip->irq_trig_fall, chip->irq_trig_raise, gc->ngpio); @@ -879,7 +888,7 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d) /* Look for any newly setup interrupt */ for_each_andnot_bit(level, irq_mask, reg_direction, gc->ngpio) - pca953x_gpio_direction_input(&chip->gpio_chip, level); + pca953x_gpio_direction_input_unlocked(&chip->gpio_chip, level); mutex_unlock(&chip->irq_lock); } -- cgit v1.2.3 From b4bee12ebeccfcd5959ace2c3a4af08f5a917d4c Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Fri, 17 Jul 2026 11:32:03 +0800 Subject: PCI: imx6: Keep i.MX6 Root Port MSI/MSI-X Capabilities with iMSI-RX to work around hardware bug On some NXP chipsets, disabling Root Port MSI/MSI-X Capabilities blocks MSIs originating from Endpoints from reaching the iMSI-RX controller. To address this hardware bug, commit 3a4e8302e72f ("PCI: imx6: Keep Root Port MSI capability with iMSI-RX to work around hardware bug") preserves Root Port MSI and MSI-X Capabilities on i.MX7D, i.MX8MM, and i.MX8MQ when iMSI-RX is in use. The same applies to i.MX6Q, i.MX6QP, and i.MX6SX, so preserve Root Port MSI/MSI-X Capabilities there as well. Note that preserving these Capabilities means Root Port-originated MSIs such as AER and PME won't be received due to separate hardware limitations. Users may need to use workarounds such as passing the 'pcie_pme=nomsi' command-line parameter. Fixes: f5cd8a929c825 ("PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller") Signed-off-by: Soeren Moch Signed-off-by: Richard Zhu Signed-off-by: Bjorn Helgaas Reviewed-by: Frank Li Reviewed-by: Manivannan Sadhasivam Acked-by: Richard Zhu Cc: stable@vger.kernel.org # 7.0+ Link: https://patch.msgid.link/20260717033203.2965045-1-hongxing.zhu@oss.nxp.com --- drivers/pci/controller/dwc/pci-imx6.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 98e1db751132..dba27eac6bff 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -1995,7 +1995,8 @@ static const struct imx_pcie_drvdata drvdata[] = { .flags = IMX_PCIE_FLAG_IMX_PHY | IMX_PCIE_FLAG_SPEED_CHANGE_WORKAROUND | IMX_PCIE_FLAG_BROKEN_SUSPEND | - IMX_PCIE_FLAG_SUPPORTS_SUSPEND, + IMX_PCIE_FLAG_SUPPORTS_SUSPEND | + IMX_PCIE_FLAG_KEEP_MSI_CAP, .dbi_length = 0x200, .gpr = "fsl,imx6q-iomuxc-gpr", .ltssm_off = IOMUXC_GPR12, @@ -2011,7 +2012,8 @@ static const struct imx_pcie_drvdata drvdata[] = { .flags = IMX_PCIE_FLAG_IMX_PHY | IMX_PCIE_FLAG_SPEED_CHANGE_WORKAROUND | IMX_PCIE_FLAG_SKIP_L23_READY | - IMX_PCIE_FLAG_SUPPORTS_SUSPEND, + IMX_PCIE_FLAG_SUPPORTS_SUSPEND | + IMX_PCIE_FLAG_KEEP_MSI_CAP, .gpr = "fsl,imx6q-iomuxc-gpr", .ltssm_off = IOMUXC_GPR12, .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2, @@ -2026,7 +2028,8 @@ static const struct imx_pcie_drvdata drvdata[] = { .flags = IMX_PCIE_FLAG_IMX_PHY | IMX_PCIE_FLAG_SPEED_CHANGE_WORKAROUND | IMX_PCIE_FLAG_SKIP_L23_READY | - IMX_PCIE_FLAG_SUPPORTS_SUSPEND, + IMX_PCIE_FLAG_SUPPORTS_SUSPEND | + IMX_PCIE_FLAG_KEEP_MSI_CAP, .dbi_length = 0x200, .gpr = "fsl,imx6q-iomuxc-gpr", .ltssm_off = IOMUXC_GPR12, -- cgit v1.2.3 From 523307b8516fc740895238af8473aa0630b3e088 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 11 Jul 2026 16:36:55 +0900 Subject: ntfs: preserve RECALL_ON_OPEN on WSL special-file reparse points When creating a WSL special file (socket, fifo, character or block device), __ntfs_create() sets FILE_ATTRIBUTE_RECALL_ON_OPEN in ni->flags as valid_reparse_data() requires for these tags. This flag is intentionally absent from $FILE_NAME, so the subsequent reload ni->flags = fn->file_attributes; drops it from ni->flags, the authoritative copy written back to $STANDARD_INFORMATION. The on-disk file_attributes becomes 0x00000404 instead of 0x00040404, and after a remount valid_reparse_data() rejects the reparse point while fsck reports "$REPARSE_POINT data is corrupted". Preserve the RECALL_ON_OPEN bit across the reload. Symlinks do not set that bit, so they are unaffected. Fixes: af0db57d4293 ("ntfs: update inode operations") Signed-off-by: Namjae Jeon --- fs/ntfs/namei.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ntfs/namei.c b/fs/ntfs/namei.c index 5ff25e9aaa32..cd403b1d99ee 100644 --- a/fs/ntfs/namei.c +++ b/fs/ntfs/namei.c @@ -685,7 +685,8 @@ static struct ntfs_inode *__ntfs_create(struct mnt_idmap *idmap, struct inode *d mutex_unlock(&dir_ni->mrec_lock); mutex_unlock(&ni->mrec_lock); - ni->flags = fn->file_attributes; + ni->flags = fn->file_attributes | + (ni->flags & FILE_ATTRIBUTE_RECALL_ON_OPEN); /* Set the sequence number. */ vi->i_generation = ni->seq_no; set_nlink(vi, 1); -- cgit v1.2.3 From ef19a9cf037957fe3a35df8355c76ff0a63a0436 Mon Sep 17 00:00:00 2001 From: Rosen Penev Date: Sun, 12 Jul 2026 15:31:37 -0700 Subject: ata: sata_mv: accept 1 or 2 resources in platform probe Board files in arch/arm/plat-orion, arch/arm/mach-dove, arch/arm/mach-mv78xx0 and arch/arm/mach-orion5x still register the "sata_mv" device with two resources (IORESOURCE_MEM plus IORESOURCE_IRQ). Those devices are rejected with -EINVAL, so SATA no longer probes on legacy Marvell Orion/Kirkwood-style boards. Accept both 1 resource (DT, IRQ fetched via platform_get_irq()) and 2 resources (legacy, IRQ supplied as a second resource) so both probing paths work. Fixes: b3b2bec9646e ("ata: sata_mv: Fixes expected number of resources now IRQs are gone") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Signed-off-by: Damien Le Moal --- drivers/ata/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 41647a56a9f4..365454390d7e 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4027,7 +4027,7 @@ static int mv_platform_probe(struct platform_device *pdev) /* * Simple resource validation .. */ - if (unlikely(pdev->num_resources != 1)) { + if (unlikely(pdev->num_resources != 1 && pdev->num_resources != 2)) { dev_err(&pdev->dev, "invalid number of resources\n"); return -EINVAL; } -- cgit v1.2.3 From 4d99a91574c420decab56cc880fad0dc15b8a7a3 Mon Sep 17 00:00:00 2001 From: Radhey Shyam Pandey Date: Fri, 17 Jul 2026 23:55:26 +0530 Subject: ata: ahci_ceva: fix error paths in ceva_ahci_platform_enable_resources() On phy_init() failure the error path fallsthrough to disable_rsts, which deasserts the controller reset and then enters disable_phys calling phy_power_off() on PHYs that were never powered on. That corrupts the PHY power_count and triggers an extra runtime PM put. Use a separate exit_phys path that unwinds with phy_exit() only and falls through to disable_clks while the controller remains in reset. Reserve phy_power_off() for the phy_power_on() failure path only, and skip masked-out ports in both unwind loops. On phy_power_on() failure re-assert the controller reset before disabling clocks and regulators, matching the teardown order used by ahci_platform_enable_resources() and ahci_platform_disable_resources(). Fixes: 26c8404e162b ("ata: ahci_ceva: fix error handling for Xilinx GT PHY support") Signed-off-by: Radhey Shyam Pandey Signed-off-by: Damien Le Moal --- drivers/ata/ahci_ceva.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c index 2d6a08c23d6a..2961e53288f4 100644 --- a/drivers/ata/ahci_ceva.c +++ b/drivers/ata/ahci_ceva.c @@ -211,7 +211,7 @@ static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv) rc = phy_init(hpriv->phys[i]); if (rc) - goto disable_rsts; + goto exit_phys; } /* De-assert the controller reset */ @@ -230,14 +230,24 @@ static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv) return 0; -disable_rsts: - ahci_platform_deassert_rsts(hpriv); - disable_phys: while (--i >= 0) { + if (ahci_ignore_port(hpriv, i)) + continue; + phy_power_off(hpriv->phys[i]); phy_exit(hpriv->phys[i]); } + ahci_platform_assert_rsts(hpriv); + goto disable_clks; + +exit_phys: + while (--i >= 0) { + if (ahci_ignore_port(hpriv, i)) + continue; + + phy_exit(hpriv->phys[i]); + } disable_clks: ahci_platform_disable_clks(hpriv); -- cgit v1.2.3 From 8e957e4907c58e9ca944f98799524f2bbb9cf68a Mon Sep 17 00:00:00 2001 From: Haidar Lee Date: Wed, 15 Jul 2026 14:04:40 +0800 Subject: ASoC: tas2562: fix DVC coefficient write order The TAS2562 applies the 32-bit digital volume coefficient to the playback path when the last byte, DVC_CFG4 (book 0 page 2 reg 0x0F), is written. tas2562_volume_control_put() wrote DVC_CFG4 first and DVC_CFG1 (the MSB) last, so every volume change latched a value made of the previous coefficient's upper three bytes combined with the new LSB; the remaining bytes only took effect on the next volume change. In practice the control was unusable: the first setting after power-on always played at roughly 0 dB no matter what value was requested (the chip's default upper bytes were still latched), and most subsequent changes muted the output entirely or produced a distorted, over-unity gain. Verified on a TAS2562 (ADLINK OSM-520 / MT8189 board) by tracing the I2C writes with ftrace and by writing the same coefficients manually in both byte orders: written MSB-first the register block behaves exactly as the driver expects, LSB-first reproduces the broken behaviour. Write the bytes MSB first with DVC_CFG4 last so the complete new coefficient is latched atomically. Fixes: bf726b1c86f2 ("ASoC: tas2562: Add support for digital volume control") Cc: stable@vger.kernel.org Signed-off-by: Haidar Lee Link: https://patch.msgid.link/20260715-tas2562-dvc-fix-v1-1-072b13901b20@adlinktech.com Signed-off-by: Mark Brown --- sound/soc/codecs/tas2562.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c index e1d62f30418a..ec32ef0afd7e 100644 --- a/sound/soc/codecs/tas2562.c +++ b/sound/soc/codecs/tas2562.c @@ -475,20 +475,27 @@ static int tas2562_volume_control_put(struct snd_kcontrol *kcontrol, u32 reg_val; reg_val = float_vol_db_lookup[ucontrol->value.integer.value[0]/2]; - ret = snd_soc_component_write(component, TAS2562_DVC_CFG4, - (reg_val & 0xff)); - if (ret) - return ret; - ret = snd_soc_component_write(component, TAS2562_DVC_CFG3, - ((reg_val >> 8) & 0xff)); + /* + * The device applies the 32-bit coefficient to the playback path on + * the write to DVC_CFG4 (the LSB, book 0 page 2 reg 0x0F), so the + * bytes must be written MSB first and DVC_CFG4 last. Writing CFG4 + * first latches a mix of the previous coefficient's upper bytes and + * the new LSB instead of the requested value. + */ + ret = snd_soc_component_write(component, TAS2562_DVC_CFG1, + ((reg_val >> 24) & 0xff)); if (ret) return ret; ret = snd_soc_component_write(component, TAS2562_DVC_CFG2, ((reg_val >> 16) & 0xff)); if (ret) return ret; - ret = snd_soc_component_write(component, TAS2562_DVC_CFG1, - ((reg_val >> 24) & 0xff)); + ret = snd_soc_component_write(component, TAS2562_DVC_CFG3, + ((reg_val >> 8) & 0xff)); + if (ret) + return ret; + ret = snd_soc_component_write(component, TAS2562_DVC_CFG4, + (reg_val & 0xff)); if (ret) return ret; -- cgit v1.2.3 From bdb0fd6de403fcea7b85dc9d38f0a571583ebe80 Mon Sep 17 00:00:00 2001 From: Haidar Lee Date: Wed, 15 Jul 2026 14:04:41 +0800 Subject: ASoC: tas2562: fix broken entries in the volume lookup table The float_vol_db_lookup table is supposed to hold round(10^(dB/20) * 2^30) for every 2 dB step from -110 dB to 0 dB, which is 56 entries, but it only has 55: the -90 dB entry duplicates the -92 dB value (0x0000695b) and the -20 dB entry (0x06666666) is missing altogether. As a result every step between -90 dB and -22 dB is off by 2 dB, and the control's maximum raw value of 110 indexes one element past the end of the array. Replace the duplicated -90 dB entry with the correct value 0x000084a3 and add the missing -20 dB entry, bringing the table to the full 56 entries so index 55 (raw value 110, 0 dB) is in range again. Fixes: bf726b1c86f2 ("ASoC: tas2562: Add support for digital volume control") Cc: stable@vger.kernel.org Signed-off-by: Haidar Lee Link: https://patch.msgid.link/20260715-tas2562-dvc-fix-v1-2-072b13901b20@adlinktech.com Signed-off-by: Mark Brown --- sound/soc/codecs/tas2562.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c index ec32ef0afd7e..cdd695c3807e 100644 --- a/sound/soc/codecs/tas2562.c +++ b/sound/soc/codecs/tas2562.c @@ -32,15 +32,16 @@ static const unsigned int float_vol_db_lookup[] = { 0x00000d43, 0x000010b2, 0x00001505, 0x00001a67, 0x00002151, 0x000029f1, 0x000034cd, 0x00004279, 0x000053af, 0x0000695b, -0x0000695b, 0x0000a6fa, 0x0000d236, 0x000108a4, 0x00014d2a, +0x000084a3, 0x0000a6fa, 0x0000d236, 0x000108a4, 0x00014d2a, 0x0001a36e, 0x00021008, 0x000298c0, 0x000344df, 0x00041d8f, 0x00052e5a, 0x000685c8, 0x00083621, 0x000a566d, 0x000d03a7, 0x0010624d, 0x0014a050, 0x0019f786, 0x0020b0bc, 0x0029279d, 0x0033cf8d, 0x004139d3, 0x00521d50, 0x00676044, 0x0082248a, 0x00a3d70a, 0x00ce4328, 0x0103ab3d, 0x0146e75d, 0x019b8c27, 0x02061b89, 0x028c423f, 0x03352529, 0x0409c2b0, 0x05156d68, -0x080e9f96, 0x0a24b062, 0x0cc509ab, 0x10137987, 0x143d1362, -0x197a967f, 0x2013739e, 0x28619ae9, 0x32d64617, 0x40000000 +0x06666666, 0x080e9f96, 0x0a24b062, 0x0cc509ab, 0x10137987, +0x143d1362, 0x197a967f, 0x2013739e, 0x28619ae9, 0x32d64617, +0x40000000 }; struct tas2562_data { -- cgit v1.2.3 From 8fb41964f7e4e4207c8999af2056894caa7a252a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 15 Jul 2026 21:18:09 +0100 Subject: ASoC: tas2562: Validate values for volume writes tas2562_volume_control_put() does not do any validation of the control value written by userspace, it uses it to look up a value in a fixed size array which can easily be overflowed and then writes whatever value it gets back to the device. Add validation that we are loading a value we have in the array. Cc: stable@vger.kernel.org Reviewed-by: Cezary Rojewski Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-1-97bf467c924e@kernel.org Signed-off-by: Mark Brown --- sound/soc/codecs/tas2562.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c index e1d62f30418a..40b7803c68be 100644 --- a/sound/soc/codecs/tas2562.c +++ b/sound/soc/codecs/tas2562.c @@ -471,10 +471,14 @@ static int tas2562_volume_control_put(struct snd_kcontrol *kcontrol, { struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); struct tas2562_data *tas2562 = snd_soc_component_get_drvdata(component); - int ret; + int ret, index; u32 reg_val; - reg_val = float_vol_db_lookup[ucontrol->value.integer.value[0]/2]; + index = ucontrol->value.integer.value[0] / 2; + if (index < 0 || index >= ARRAY_SIZE(float_vol_db_lookup)) + return -EINVAL; + + reg_val = float_vol_db_lookup[index]; ret = snd_soc_component_write(component, TAS2562_DVC_CFG4, (reg_val & 0xff)); if (ret) -- cgit v1.2.3 From 9a9269dbbf1aba4bf329f770d6c473dc9cfb29e8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 15 Jul 2026 21:18:10 +0100 Subject: ASoC: tas2562: Fix event generation for volume control ALSA put() operations should return 0 for noop updates and 1 if the value of the control changed, this is used by the ALSA core to generate events to userspace. tas2562_volume_control_put() does not implement this, it just writes whatever value userspace wrote to the device and returns 0 regardless of what the previous value was. Fix this by suppressing writes if the value is unchanged and returning 1 if the writes succeed. Reviewed-by: Cezary Rojewski Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-2-97bf467c924e@kernel.org Signed-off-by: Mark Brown --- sound/soc/codecs/tas2562.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c index 40b7803c68be..d3d0aaa0f607 100644 --- a/sound/soc/codecs/tas2562.c +++ b/sound/soc/codecs/tas2562.c @@ -474,6 +474,9 @@ static int tas2562_volume_control_put(struct snd_kcontrol *kcontrol, int ret, index; u32 reg_val; + if (tas2562->volume_lvl == ucontrol->value.integer.value[0]) + return 0; + index = ucontrol->value.integer.value[0] / 2; if (index < 0 || index >= ARRAY_SIZE(float_vol_db_lookup)) return -EINVAL; @@ -498,7 +501,7 @@ static int tas2562_volume_control_put(struct snd_kcontrol *kcontrol, tas2562->volume_lvl = ucontrol->value.integer.value[0]; - return 0; + return 1; } /* Digital Volume Control. From 0 dB to -110 dB in 1 dB steps */ -- cgit v1.2.3 From 58b638e7c4559b35367a25e319adfe91e8f5ebe7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 15 Jul 2026 21:18:11 +0100 Subject: ASoC: tas2562: Fix default digital volume The tas2562 digital volume is spread over four registers and is implemented as lookups into a table so the driver stores the value for the userspace control in the driver data. This defaults to 0 due to kzalloc() but the register default is 0x40400000 which maps onto something a bit over the largest value defined in the lookup table. While it's not an exact match update the default to the largest value, avoiding user surprise due to a sudden change on first write. Reviewed-by: Cezary Rojewski Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-3-97bf467c924e@kernel.org Signed-off-by: Mark Brown --- sound/soc/codecs/tas2562.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c index d3d0aaa0f607..e5fba2195a24 100644 --- a/sound/soc/codecs/tas2562.c +++ b/sound/soc/codecs/tas2562.c @@ -739,6 +739,8 @@ static int tas2562_probe(struct i2c_client *client) data->client = client; data->dev = &client->dev; data->model_id = (uintptr_t)i2c_get_match_data(client); + /* Register default is 0x40400000, this is closest */ + data->volume_lvl = (ARRAY_SIZE(float_vol_db_lookup) - 1) * 2; tas2562_parse_dt(data); -- cgit v1.2.3 From 8e29ed571788f41d1121e1e515ba8745695a38dc Mon Sep 17 00:00:00 2001 From: Zhang Heng Date: Sat, 18 Jul 2026 16:09:49 +0800 Subject: ASoC: amd: yc: Add DMI quirk for ASUS EXPERTBOOK PM1403CDA Add a DMI quirk for the Asus Vivobook Pro 15 M6500RE fixing the issue where the internal microphone was not detected. https://bugzilla.kernel.org/show_bug.cgi?id=220806 Signed-off-by: Zhang Heng Link: https://patch.msgid.link/20260718080949.157230-1-zhangheng@kylinos.cn Signed-off-by: Mark Brown --- sound/soc/amd/yc/acp6x-mach.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index af1dce9c9b8a..2f54d4e30539 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -829,6 +829,14 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_BOARD_NAME, "PM1403CDA"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vivobook_ASUSLaptop M6500RE_M6500RE"), + } + }, + {} }; -- cgit v1.2.3 From 890b4253134f3a39883af7d5bea67af9c494c56d Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Wed, 15 Jul 2026 10:47:57 +0800 Subject: ASoC: fsl_asrc: fix m2m_init error path to use goto instead of bare return When fsl_asrc_m2m_init() fails in fsl_asrc_probe(), the code did a bare return ret, bypassing pm_runtime_disable() in err_pm_get_sync. Use goto err_pm_get_sync to ensure proper cleanup on failure. Fixes: 286d658477a4 ("ASoC: fsl_asrc: register m2m platform device") Cc: stable@vger.kernel.org Signed-off-by: Shengjiu Wang Link: https://patch.msgid.link/20260715024758.1252801-2-shengjiu.wang@oss.nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_asrc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index 5fda9b647c70..f23c21032287 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -1419,7 +1419,7 @@ static int fsl_asrc_probe(struct platform_device *pdev) ret = fsl_asrc_m2m_init(asrc); if (ret) { dev_err(&pdev->dev, "failed to init m2m device %d\n", ret); - return ret; + goto err_pm_get_sync; } return 0; -- cgit v1.2.3 From a54bc0eef90ea760039c14bb7f3b5db42529f84d Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Wed, 15 Jul 2026 10:47:58 +0800 Subject: ASoC: fsl_easrc: fix m2m_init error path to use goto instead of bare return When fsl_asrc_m2m_init() fails in fsl_easrc_probe(), the code did a bare return ret, bypassing pm_runtime_disable() in err_pm_disable. Use goto err_pm_disable to ensure proper cleanup on failure. Fixes: b62eaff0650d ("ASoC: fsl_easrc: register m2m platform device") Cc: stable@vger.kernel.org Signed-off-by: Shengjiu Wang Link: https://patch.msgid.link/20260715024758.1252801-3-shengjiu.wang@oss.nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_easrc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_easrc.c b/sound/soc/fsl/fsl_easrc.c index 114a6c0b6b73..8535ef844ce0 100644 --- a/sound/soc/fsl/fsl_easrc.c +++ b/sound/soc/fsl/fsl_easrc.c @@ -2269,7 +2269,7 @@ static int fsl_easrc_probe(struct platform_device *pdev) ret = fsl_asrc_m2m_init(easrc); if (ret) { dev_err(&pdev->dev, "failed to init m2m device %d\n", ret); - return ret; + goto err_pm_disable; } return 0; -- cgit v1.2.3 From 361f533a2dce2c2841fe4dc0c9d85a67117edf95 Mon Sep 17 00:00:00 2001 From: Krishna Kurapati Date: Sat, 18 Jul 2026 15:01:31 +0530 Subject: phy: qcom: m31-eusb2: Fix return value of init call The init call currently returns success irrespective of any failures during repeater init or clock enablement. Return appropriate error value in the init call failure path. Fixes: 9c8504861cc4 ("phy: qcom: Add M31 based eUSB2 PHY driver") Signed-off-by: Krishna Kurapati Link: https://patch.msgid.link/20260718-m31-eusb2-fix-v1-1-8588a1b94d76@oss.qualcomm.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-m31-eusb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c index 0bec8657149c..275df38256de 100644 --- a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c @@ -221,7 +221,7 @@ disable_repeater: disable_vreg: regulator_bulk_disable(M31_EUSB_NUM_VREGS, phy->vregs); - return 0; + return ret; } static int m31eusb2_phy_exit(struct phy *uphy) -- cgit v1.2.3 From be2b5b17b7053fee142939076746d26b2d6c9702 Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Tue, 14 Jul 2026 19:41:20 +0400 Subject: phy: rockchip: naneng-combphy: Always configure SSC spread direction Commit 0b31f297557f ("phy: rockchip: naneng-combphy: Consolidate SSC configuration") moved the SSC spread spectrum direction setup into the new rk_combphy_common_cfg_ssc() helper. That helper returns early when the 'rockchip,enable-ssc' property is absent, whereas the equivalent RK3568_PHYREG32 direction writes previously ran unconditionally in the per-type switch statements, independent of whether SSC modulation was actually enabled. As no in-tree board sets 'rockchip,enable-ssc', this changed the behavior at least for USB3 on RK3576, which now fails to bring up the link. USB 2.0 still enumerates, but USB 3.0 does not, and the SuperSpeed root port floods the log every second with: usb usb2-port1: Cannot enable. Maybe the USB cable is bad? This was observed on two different RK3576 devices with a CoreChips SL6341 USB 2.0/3.0 hub connected to the USB DRD controller running in host mode. Perform the SSC direction writes for PCIe/USB3 (and SATA) before the enable_ssc check so that they always run, as they did before the consolidation. Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/CAKTNdwH_ZMQa-97h+tqdsWqXKtorkFF9wHAMn60-8ZGKuze_Mg@mail.gmail.com/ Fixes: 0b31f297557f ("phy: rockchip: naneng-combphy: Consolidate SSC configuration") Signed-off-by: Alexey Charkov Tested-by: Liu Changjie Link: https://patch.msgid.link/20260714-naneng-ssc-fix-v1-1-1c40a58061ae@flipper.net Signed-off-by: Vinod Koul --- drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c index 2b0f152f5470..7843356a4dd4 100644 --- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c @@ -452,9 +452,6 @@ static void rk_combphy_common_cfg_ssc(struct rockchip_combphy_priv *priv, unsign struct device_node *np = priv->dev->of_node; u32 val; - if (!priv->enable_ssc) - return; - /* Set SSC downward spread spectrum for PCIe and USB3 */ if (priv->type == PHY_TYPE_PCIE || priv->type == PHY_TYPE_USB3) { val = FIELD_PREP(RK3568_PHYREG32_SSC_MASK, RK3568_PHYREG32_SSC_DOWNWARD); @@ -471,6 +468,9 @@ static void rk_combphy_common_cfg_ssc(struct rockchip_combphy_priv *priv, unsign RK3568_PHYREG32); } + if (!priv->enable_ssc) + return; + /* Enable SSC */ val = readl(priv->mmio + RK3568_PHYREG8); val |= RK3568_PHYREG8_SSC_EN; -- cgit v1.2.3 From 317e21532e6ffa1de026bdbce5ba98e1b70ca5c6 Mon Sep 17 00:00:00 2001 From: Uday Khare Date: Mon, 20 Jul 2026 16:09:50 +0530 Subject: ASoC: max98095: fix missing IS_ERR() before PTR_ERR() on mclk lookup In max98095_probe(), the -EPROBE_DEFER check after devm_clk_get() is broken due to a missing IS_ERR() guard. The code intends to return -EPROBE_DEFER only when the clock lookup fails with that specific error. However, without IS_ERR() the check: if (PTR_ERR(max98095->mclk) == -EPROBE_DEFER) is called unconditionally, including when devm_clk_get() succeeds and returns a valid pointer. Calling PTR_ERR() on a valid pointer reinterprets its address as a signed long; the result is arbitrary and is almost never equal to -EPROBE_DEFER, so the check silently does nothing in the success case. When devm_clk_get() fails with any error other than -EPROBE_DEFER the check is also skipped, leaving max98095->mclk holding an error pointer with no indication to the caller. This means a deferred probe will never actually be triggered for this device, and any non-EPROBE_DEFER clock error is silently swallowed with the error pointer left in the mclk field. Fix this by adding the missing IS_ERR() guard around the PTR_ERR() call, matching the pattern already used in the sibling max98088 and wm8960 drivers. Fixes: e3048c3d2be5 ("ASoC: max98095: Add master clock handling") Signed-off-by: Uday Khare Link: https://patch.msgid.link/20260720103950.14474-1-udaykhare77@gmail.com Signed-off-by: Mark Brown --- sound/soc/codecs/max98095.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/max98095.c b/sound/soc/codecs/max98095.c index ced9bd4d94da..130b6694a634 100644 --- a/sound/soc/codecs/max98095.c +++ b/sound/soc/codecs/max98095.c @@ -1987,8 +1987,9 @@ static int max98095_probe(struct snd_soc_component *component) int ret = 0; max98095->mclk = devm_clk_get(component->dev, "mclk"); - if (PTR_ERR(max98095->mclk) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (IS_ERR(max98095->mclk)) + if (PTR_ERR(max98095->mclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; /* reset the codec, the DSP core, and disable all interrupts */ max98095_reset(component); -- cgit v1.2.3 From a792ce0fad61a70793ec565743f11d6ca534de59 Mon Sep 17 00:00:00 2001 From: Uday Khare Date: Mon, 20 Jul 2026 16:12:54 +0530 Subject: ASoC: max98090: fix missing IS_ERR() before PTR_ERR() on mclk lookup In max98090_probe(), the -EPROBE_DEFER check after devm_clk_get() is broken due to a missing IS_ERR() guard. The code intends to return -EPROBE_DEFER only when the clock lookup fails with that specific error. However, without IS_ERR() the check: if (PTR_ERR(max98090->mclk) == -EPROBE_DEFER) is called unconditionally, including when devm_clk_get() succeeds and returns a valid pointer. Calling PTR_ERR() on a valid pointer reinterprets its address as a signed long; the result is arbitrary and is almost never equal to -EPROBE_DEFER, so the check silently does nothing in the success case. When devm_clk_get() fails with any error other than -EPROBE_DEFER the check is also skipped, leaving max98090->mclk holding an error pointer with no indication to the caller. This means a deferred probe will never actually be triggered for this device, and any non-EPROBE_DEFER clock error is silently swallowed with the error pointer left in the mclk field. Fix this by adding the missing IS_ERR() guard around the PTR_ERR() call, matching the pattern already used in the sibling max98088 and wm8960 drivers. Fixes: b10ab7b838bd ("ASoC: max98090: Add master clock handling") Signed-off-by: Uday Khare Link: https://patch.msgid.link/20260720104254.14948-1-udaykhare77@gmail.com Signed-off-by: Mark Brown --- sound/soc/codecs/max98090.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index da416329b038..57bd5a1c34c8 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -2423,8 +2423,9 @@ static int max98090_probe(struct snd_soc_component *component) dev_dbg(component->dev, "max98090_probe\n"); max98090->mclk = devm_clk_get(component->dev, "mclk"); - if (PTR_ERR(max98090->mclk) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (IS_ERR(max98090->mclk)) + if (PTR_ERR(max98090->mclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; max98090->component = component; -- cgit v1.2.3 From db3dbdfea1b8f38774419c5c2c14e4b81c48708d Mon Sep 17 00:00:00 2001 From: Sang-Heon Jeon Date: Sun, 14 Jun 2026 22:38:06 +0900 Subject: of: reserved_mem: prevent OOB when too many dynamic regions are defined On boot, fdt_scan_reserved_mem() saves each dynamically-placed /reserved-memory subnode into a local array of size MAX_RESERVED_REGIONS. If the device tree defines more than MAX_RESERVED_REGIONS dynamically-placed regions, fdt_scan_reserved_mem() writes past the end of the local array. Add a bounds check that logs an error and skips the excess regions, restoring the original behavior. Fixes: 8a6e02d0c00e ("of: reserved_mem: Restructure how the reserved memory regions are processed") Signed-off-by: Sang-Heon Jeon Link: https://patch.msgid.link/20260614133807.2165124-2-ekffu200098@gmail.com Signed-off-by: Rob Herring (Arm) --- drivers/of/of_reserved_mem.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index 82222bd45ac6..42e3e2d8a2b8 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -359,6 +359,7 @@ int __init fdt_scan_reserved_mem(void) err = __reserved_mem_reserve_reg(child, uname); if (!err) count++; + /* * Save the nodes for the dynamically-placed regions * into an array which will be used for allocation right @@ -366,10 +367,17 @@ int __init fdt_scan_reserved_mem(void) * or marked as no-map. This is done to avoid dynamically * allocating from one of the statically-placed regions. */ - if (err == -ENOENT && of_get_flat_dt_prop(child, "size", NULL)) { - dynamic_nodes[dynamic_nodes_cnt] = child; - dynamic_nodes_cnt++; + if (err != -ENOENT || !of_get_flat_dt_prop(child, "size", NULL)) + continue; + + if (dynamic_nodes_cnt == MAX_RESERVED_REGIONS) { + pr_err("too many defined dynamic regions, skip '%s'\n", + uname); + continue; } + + dynamic_nodes[dynamic_nodes_cnt] = child; + dynamic_nodes_cnt++; } for (int i = 0; i < dynamic_nodes_cnt; i++) { const char *uname; -- cgit v1.2.3 From b056f21a38276ead20353d71d50a52206609d242 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 19 Jun 2026 18:18:21 -0700 Subject: power: supply: bd71828: add a terminating table border Fix a documentation build error by adding a bottom table border: Documentation/ABI/testing/sysfs-class-power-bd71828:1: ERROR: Malformed table. No bottom table border found. ============ =========================================== 1 automatic adjustment of input current limit 0 no adjustment of input current limit. This helps for more unusual power sources like solar modules. [docutils] Fixes: e92786dd86a2 ("power: supply: bd71828: sysfs for auto input current limitation") Signed-off-by: Randy Dunlap Acked-by: Matti Vaittinen Link: https://patch.msgid.link/20260620011821.3568674-1-rdunlap@infradead.org Signed-off-by: Sebastian Reichel --- Documentation/ABI/testing/sysfs-class-power-bd71828 | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/ABI/testing/sysfs-class-power-bd71828 b/Documentation/ABI/testing/sysfs-class-power-bd71828 index 2d451e1c8336..f9a325e005f3 100644 --- a/Documentation/ABI/testing/sysfs-class-power-bd71828 +++ b/Documentation/ABI/testing/sysfs-class-power-bd71828 @@ -10,3 +10,4 @@ Description: 0 no adjustment of input current limit. This helps for more unusual power sources like solar modules. + ============ =========================================== -- cgit v1.2.3 From 725668c6b6aa3971fe850659102c250d0d676e18 Mon Sep 17 00:00:00 2001 From: Jianing Li Date: Wed, 1 Jul 2026 14:10:42 +0800 Subject: power: supply: max17040: handle missing status supplier MAX17040 does not report charger state itself, so the driver forwards POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is registered, power_supply_get_property_from_supplier() returns -ENODEV and leaves the output value untouched. max17040_get_property() currently ignores that error and returns success, so userspace can read an uninitialized status value from the battery power supply. This happens on systems that use the fuel gauge without a charger supplier relationship in firmware. Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and propagate other supplier lookup errors. Fixes: f4b782af61ae ("power: max17040: pass status property from supplier") Cc: stable@vger.kernel.org # 6.7+ Signed-off-by: Jianing Li Link: https://patch.msgid.link/20260701061042.1008-1-m13940358460@163.com Signed-off-by: Sebastian Reichel --- drivers/power/supply/max17040_battery.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c index e94d53b36aa4..03ac569e185c 100644 --- a/drivers/power/supply/max17040_battery.c +++ b/drivers/power/supply/max17040_battery.c @@ -405,7 +405,11 @@ static int max17040_get_property(struct power_supply *psy, val->intval = chip->low_soc_alert; break; case POWER_SUPPLY_PROP_STATUS: - power_supply_get_property_from_supplier(psy, psp, val); + ret = power_supply_get_property_from_supplier(psy, psp, val); + if (ret == -ENODEV) + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + else if (ret) + return ret; break; case POWER_SUPPLY_PROP_TEMP: if (!chip->channel_temp) -- cgit v1.2.3 From f7b253a6e217f71d754d70c525e9b4c1dcbd4414 Mon Sep 17 00:00:00 2001 From: Sasha Finkelstein Date: Sun, 12 Jul 2026 00:48:56 +0200 Subject: power: supply: macsmc: Support macOS 27 SMC firmware The SMC firmware included in macOS 27 changed the size of BCF0 key from 4 to 1 bytes. This key is used for indicating that battery state is critically low. In addition, B0RM key has changed endianness. Reviewed-by: Sven Peter Reviewed-by: Joshua Peisach Reviewed-by: Janne Grunau Cc: stable@vger.kernel.org Fixes: 0ebf821cf6c7 ("power: supply: Add macsmc-power driver for Apple Silicon") Signed-off-by: Sasha Finkelstein Link: https://patch.msgid.link/20260712-gate-power-v4-1-aa59c6583247@chaosmail.tech Signed-off-by: Sebastian Reichel --- drivers/power/supply/macsmc-power.c | 52 ++++++++++++++++++++++++++++++++----- 1 file changed, 45 insertions(+), 7 deletions(-) diff --git a/drivers/power/supply/macsmc-power.c b/drivers/power/supply/macsmc-power.c index ced07f71e0a8..ef735f86394e 100644 --- a/drivers/power/supply/macsmc-power.c +++ b/drivers/power/supply/macsmc-power.c @@ -86,6 +86,11 @@ struct macsmc_power { bool has_ch0i; /* Force discharge (Older firmware) */ bool has_ch0c; /* Inhibit charge (Older firmware) */ bool has_chte; /* Inhibit charge (Modern firmware) */ + /* + * Battery critical key is 1 byte and charge key is little endian + * (Modern firmware) + */ + bool fw_ge_27; u8 num_cells; int nominal_voltage_mv; @@ -273,6 +278,20 @@ static int macsmc_battery_get_date(const char *s, int *out) return 0; } +static int macsmc_battery_read_bcf0(struct macsmc_power *power, u32 *val) +{ + u8 tval = 0; + int ret; + + if (power->fw_ge_27) { + ret = apple_smc_read_u8(power->smc, SMC_KEY(BCF0), &tval); + *val = tval; + return ret; + } + + return apple_smc_read_u32(power->smc, SMC_KEY(BCF0), val); +} + static int macsmc_battery_get_capacity_level(struct macsmc_power *power) { bool flag; @@ -280,7 +299,7 @@ static int macsmc_battery_get_capacity_level(struct macsmc_power *power) int ret; /* Check for emergency shutdown condition */ - if (apple_smc_read_u32(power->smc, SMC_KEY(BCF0), &val) >= 0 && val) + if (macsmc_battery_read_bcf0(power, &val) >= 0 && val) return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; /* Check AC status for whether we could boot in this state */ @@ -303,6 +322,12 @@ static int macsmc_battery_get_capacity_level(struct macsmc_power *power) return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; } +static s16 macsmc_swap_b0rm(struct macsmc_power *power, s16 b0rm) +{ + /* B0RM was Big Endian, likely pass through from TI gas gauge */ + return power->fw_ge_27 ? b0rm : (s16)swab16(b0rm); +} + static int macsmc_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -397,8 +422,7 @@ static int macsmc_battery_get_property(struct power_supply *psy, break; case POWER_SUPPLY_PROP_CHARGE_NOW: ret = apple_smc_read_u16(power->smc, SMC_KEY(B0RM), &vu16); - /* B0RM is Big Endian, likely pass through from TI gas gauge */ - val->intval = (s16)swab16(vu16) * 1000; + val->intval = macsmc_swap_b0rm(power, vu16) * 1000; break; case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: ret = apple_smc_read_u16(power->smc, SMC_KEY(B0DC), &vu16); @@ -410,8 +434,7 @@ static int macsmc_battery_get_property(struct power_supply *psy, break; case POWER_SUPPLY_PROP_ENERGY_NOW: ret = apple_smc_read_u16(power->smc, SMC_KEY(B0RM), &vu16); - /* B0RM is Big Endian, likely pass through from TI gas gauge */ - val->intval = (s16)swab16(vu16) * power->nominal_voltage_mv; + val->intval = macsmc_swap_b0rm(power, vu16) * power->nominal_voltage_mv; break; case POWER_SUPPLY_PROP_TEMP: ret = apple_smc_read_u16(power->smc, SMC_KEY(B0AT), &vu16); @@ -577,7 +600,7 @@ static void macsmc_power_critical_work(struct work_struct *wrk) * Check if SMC flagged the battery as empty. * We trigger a graceful shutdown to let the OS save data. */ - if (apple_smc_read_u32(power->smc, SMC_KEY(BCF0), &bcf0) == 0 && bcf0 != 0) { + if (macsmc_battery_read_bcf0(power, &bcf0) == 0 && bcf0 != 0) { power->orderly_shutdown_triggered = true; dev_crit(power->dev, "Battery critical (empty flag set). Triggering orderly shutdown.\n"); orderly_poweroff(true); @@ -616,6 +639,7 @@ static int macsmc_power_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct apple_smc *smc = dev_get_drvdata(pdev->dev.parent); struct power_supply_config psy_cfg = {}; + struct apple_smc_key_info info; struct macsmc_power *power; bool has_battery = false; bool has_ac_adapter = false; @@ -714,6 +738,20 @@ static int macsmc_power_probe(struct platform_device *pdev) if (apple_smc_key_exists(smc, SMC_KEY(CH0I))) power->has_ch0i = true; + ret = apple_smc_get_key_info(power->smc, SMC_KEY(BCF0), &info); + if (ret) { + dev_err(&pdev->dev, "Failed to determine BCF0 key size\n"); + return ret; + } + if (info.size == 1) + power->fw_ge_27 = true; + else if (info.size == 4) + power->fw_ge_27 = false; + else { + dev_err(&pdev->dev, "Unexpected BCF0 key size %d\n", info.size); + return -EIO; + } + /* Reset "Optimised Battery Charging" flags to default state */ if (power->has_chte) apple_smc_write_u32(smc, SMC_KEY(CHTE), 0); @@ -766,7 +804,7 @@ static int macsmc_power_probe(struct platform_device *pdev) power->nominal_voltage_mv = MACSMC_NOMINAL_CELL_VOLTAGE_MV * power->num_cells; /* Enable critical shutdown notifications by reading status once */ - apple_smc_read_u32(power->smc, SMC_KEY(BCF0), &val32); + macsmc_battery_read_bcf0(power, &val32); psy_cfg.drv_data = power; power->batt = devm_power_supply_register(dev, &power->batt_desc, &psy_cfg); -- cgit v1.2.3 From ea3034b2b00fa50c8d2518d0804c9d427bbafa86 Mon Sep 17 00:00:00 2001 From: Gregory Price Date: Sat, 27 Jun 2026 16:22:43 -0400 Subject: mm/vmstat: fold stranded per-cpu node stats when a node comes online A per-node vmstat counter is pgdat->vm_stat[] plus per-cpu deltas. A balanced counter can sit split as global=+N / per-cpu=-N. The folds reconciling the split only walk online nodes, so when try_offline_node() marks a node offline the per-cpu deltas are stranded. A subsequent online resets the per-cpu area but not pgdat->vm_stat[], orphaning the +N permanently. All NR_VM_NODE_STAT_ITEMS are affected. The existing code zeroes the per-cpu counters and causes a permanent skew. Fold the stranded deltas instead, before the node rejoins the online set. The node is not online yet and the hotplug lock is held, so the remote access to per-cpu values is safe. Discovered when node compaction hung for a nearly empty node, as the math to determine throttling broke. Reproduced by repeated memory hotplug/unplug cycles on a node under pressure: NR_ISOLATED_ANON ratchets up and never returns to zero. Link: https://lore.kernel.org/20260627202243.758289-1-gourry@gourry.net Fixes: 75ef71840539 ("mm, vmstat: add infrastructure for per-node vmstats") Signed-off-by: Gregory Price Cc: Johannes Weiner Cc: Mel Gorman Cc: Mike Rapoport Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton --- mm/mm_init.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/mm/mm_init.c b/mm/mm_init.c index 0f64909e8d20..498d62c4ece3 100644 --- a/mm/mm_init.c +++ b/mm/mm_init.c @@ -1540,7 +1540,7 @@ void __ref free_area_init_core_hotplug(struct pglist_data *pgdat) { int nid = pgdat->node_id; enum zone_type z; - int cpu; + int cpu, i; pgdat_init_internals(pgdat); @@ -1558,10 +1558,17 @@ void __ref free_area_init_core_hotplug(struct pglist_data *pgdat) pgdat->node_start_pfn = 0; pgdat->node_present_pages = 0; - for_each_online_cpu(cpu) { - struct per_cpu_nodestat *p; + /* + * Hot-unplug can leave per-cpu vmstat deltas unfolded (folders skip + * offline nodes) - reconcile this at online. Foreign access to counters + * is safe: the node is not online yet and we hold the hotplug lock. + */ + for_each_possible_cpu(cpu) { + struct per_cpu_nodestat *p = per_cpu_ptr(pgdat->per_cpu_nodestats, cpu); - p = per_cpu_ptr(pgdat->per_cpu_nodestats, cpu); + for (i = 0; i < NR_VM_NODE_STAT_ITEMS; i++) + if (p->vm_node_stat_diff[i]) + node_page_state_add(p->vm_node_stat_diff[i], pgdat, i); memset(p, 0, sizeof(*p)); } -- cgit v1.2.3 From 4fc089235378d1f9ddb6bcbe67c192ffdcaae0ed Mon Sep 17 00:00:00 2001 From: Stanislav Kinsburskii Date: Mon, 29 Jun 2026 16:30:14 -0700 Subject: lib: test_hmm: use device devt for coherent device range selection Commit af69016dab96 ("lib: test_hmm: implement a device release method") moved the initial dmirror_allocate_chunk() call before cdev_device_add(). That means the struct cdev has not been added yet, so cdev_add() has not initialized mdevice->cdevice.dev. The coherent-device range selection uses the device minor to choose between spm_addr_dev0 and spm_addr_dev1. Reading MINOR(mdevice->cdevice.dev) before cdev_add() therefore always sees an uninitialized dev_t. As a result, both coherent devices select the same physical range, and adding the second device fails due to the overlapping dev_pagemap range. Use mdevice->device.devt instead. It is initialized in dmirror_device_init() before dmirror_allocate_chunk() is called and is the same dev_t later passed to cdev_device_add(). Link: https://lore.kernel.org/178277581197.172200.16265155329935822153.stgit@skinsburskii Fixes: af69016dab96 ("lib: test_hmm: implement a device release method") Signed-off-by: Stanislav Kinsburskii Reviewed-by: Alistair Popple Cc: Balbir Singh Cc: Zenghui Yu (Huawei) Cc: Jason Gunthorpe Cc: Leon Romanovsky Cc: Signed-off-by: Andrew Morton --- lib/test_hmm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/test_hmm.c b/lib/test_hmm.c index 9c59d1ceb5b5..c4adbf98fac7 100644 --- a/lib/test_hmm.c +++ b/lib/test_hmm.c @@ -581,7 +581,7 @@ static int dmirror_allocate_chunk(struct dmirror_device *mdevice, devmem->pagemap.type = MEMORY_DEVICE_PRIVATE; break; case HMM_DMIRROR_MEMORY_DEVICE_COHERENT: - devmem->pagemap.range.start = (MINOR(mdevice->cdevice.dev) - 2) ? + devmem->pagemap.range.start = (MINOR(mdevice->device.devt) - 2) ? spm_addr_dev0 : spm_addr_dev1; devmem->pagemap.range.end = devmem->pagemap.range.start + -- cgit v1.2.3 From 4165b7d1c45c2da0dfefe528f8d1fb7d79f0d344 Mon Sep 17 00:00:00 2001 From: Usama Arif Date: Sun, 5 Jul 2026 06:12:31 -0700 Subject: userfaultfd: wait on source PMD during UFFDIO_MOVE move_pages_huge_pmd() snapshots src_pmdval under src_ptl, drops the lock, and, for migration entries, waits with pmd_migration_entry_wait(). Passing &src_pmdval is wrong. pmd_migration_entry_wait() must lock and re-read the real page-table PMD; on split-PMD-lock kernels, a stack address also resolves to the wrong lock. softleaf_entry_wait_on_locked() then waits without a folio reference, which is safe only while serialized against migration-entry removal by the real PT lock. Pass src_pmd, matching __handle_mm_fault() and hmm_vma_walk_pmd(). Link: https://lore.kernel.org/20260705131231.1499198-1-usama.arif@linux.dev Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Reported-by: sashiko-bot Link: https://sashiko.dev/#/patchset/20260703173903.3789516-1-usama.arif%40linux.dev?part=8 Signed-off-by: Usama Arif Reviewed-by: Rik van Riel Reviewed-by: Baolin Wang Reviewed-by: Lance Yang Acked-by: David Hildenbrand (Arm) Reviewed-by: Lance Yang Reviewed-by: Lorenzo Stoakes Cc: Andrea Arcangeli Cc: Barry Song Cc: Dev Jain Cc: Johannes Weiner Cc: Liam R. Howlett Cc: Nico Pache Cc: Ryan Roberts Cc: Shakeel Butt Cc: Zi Yan Cc: Signed-off-by: Andrew Morton --- mm/huge_memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index b5d1e9d4463d..032702a4637b 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2774,7 +2774,7 @@ int move_pages_huge_pmd(struct mm_struct *mm, pmd_t *dst_pmd, pmd_t *src_pmd, pm if (!pmd_trans_huge(src_pmdval)) { spin_unlock(src_ptl); if (pmd_is_migration_entry(src_pmdval)) { - pmd_migration_entry_wait(mm, &src_pmdval); + pmd_migration_entry_wait(mm, src_pmd); return -EAGAIN; } return -ENOENT; -- cgit v1.2.3 From 07b4377bdbe74a3ec0c8da5849d014f70e003384 Mon Sep 17 00:00:00 2001 From: "Kiryl Shutsemau (Meta)" Date: Tue, 7 Jul 2026 16:13:49 +0100 Subject: fs/proc/task_mmu: fix PAGEMAP_SCAN written state for unpopulated ptes PAGEMAP_SCAN reports an unpopulated pte differently depending on which path serves the request. The PAGE_IS_WRITTEN fast path in pagemap_scan_pmd_entry() reports a pte_none as written (and, under PM_SCAN_WP_MATCHING, arms a marker); pagemap_page_category() returns 0 for the same pte_none. A request that cannot take the fast path (an extra category bit, category_anyof_mask or category_inverted) therefore reports the pte as clean and skips arming it. A range that was populated and then MADV_DONTNEED'd reads as written via one mask and clean via another, and in the latter case is not re-armed for the next round -- an incremental-dump consumer (e.g. CRIU) using a richer mask drops the zapped range and stops tracking writes to it. Report pte_none as written in pagemap_page_category() too. A pte_none carries no uffd-wp marker, i.e. it is not write-protected -- the same condition under which the present and swap cases already report PAGE_IS_WRITTEN. The fast path applies no VMA test, so neither does this. The hugetlb and fully-unpopulated-PMD (no page table) scans have no PAGE_IS_WRITTEN fast path, so they do not exhibit the per-entry divergence and are left unchanged. Add a pagemap_ioctl selftest that populates a range, drops it with MADV_DONTNEED, and checks that the fast path and the generic (category_anyof_mask) path both report every page written. Link: https://lore.kernel.org/20260707151349.92143-1-kirill@shutemov.name Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag") Signed-off-by: Kiryl Shutsemau Cc: Muhammad Usama Anjum Cc: David Hildenbrand Cc: Jann Horn Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Michal Hocko Cc: Mike Rapoport Cc: Pedro Falcato Cc: Peter Xu Cc: Shuah Khan Cc: Suren Baghdasaryan Cc: Vlastimil Babka Assisted-by: Claude:claude-fable-5 Cc: Signed-off-by: Andrew Morton --- fs/proc/task_mmu.c | 14 ++++++-- tools/testing/selftests/mm/pagemap_ioctl.c | 56 +++++++++++++++++++++++++++++- 2 files changed, 67 insertions(+), 3 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index d32408f7cd5e..d45c729ab6bb 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -2432,8 +2432,18 @@ static unsigned long pagemap_page_category(struct pagemap_scan_private *p, { unsigned long categories; - if (pte_none(pte)) - return 0; + if (pte_none(pte)) { + /* + * An unpopulated pte carries no uffd-wp marker, i.e. it is not + * write-protected, the same condition under which the present + * and swap cases below report PAGE_IS_WRITTEN. Report it here + * too so this generic path agrees with the PAGE_IS_WRITTEN fast + * path in pagemap_scan_pmd_entry(), which reports pte_none as + * written and, under PM_SCAN_WP_MATCHING, arms a marker. The + * fast path applies no VMA test, so neither does this. + */ + return PAGE_IS_WRITTEN; + } if (pte_present(pte)) { struct page *page; diff --git a/tools/testing/selftests/mm/pagemap_ioctl.c b/tools/testing/selftests/mm/pagemap_ioctl.c index 6f8971d5b3ce..f9bcff8e78fa 100644 --- a/tools/testing/selftests/mm/pagemap_ioctl.c +++ b/tools/testing/selftests/mm/pagemap_ioctl.c @@ -1051,6 +1051,57 @@ static void test_simple(void) ksft_test_result(i == TEST_ITERATIONS, "Test %s\n", __func__); } +/* + * A range that was populated and then MADV_DONTNEED'd is genuine pte_none + * with no uffd-wp marker. Such a pte must read the same regardless of which + * PAGEMAP_SCAN path serves the request: both the PAGE_IS_WRITTEN fast path and + * the generic path (reached e.g. via category_anyof_mask) must report every + * page written. + */ +static void unpopulated_scan_test(void) +{ + int npages = 16, i; + long mem_size = npages * page_size; + struct page_region regions[16]; + long fast = 0, slow = 0, ret; + char *mem; + + mem = mmap(NULL, mem_size, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (mem == MAP_FAILED) + ksft_exit_fail_msg("%s mmap failed\n", __func__); + + wp_init(mem, mem_size); + + /* Populate, then drop: the ptes become pte_none without a marker. */ + memset(mem, 1, mem_size); + if (madvise(mem, mem_size, MADV_DONTNEED)) + ksft_exit_fail_msg("%s MADV_DONTNEED failed\n", __func__); + + /* Fast path: category_mask == return_mask == PAGE_IS_WRITTEN. */ + ret = pagemap_ioctl(mem, mem_size, regions, npages, 0, 0, + PAGE_IS_WRITTEN, 0, 0, PAGE_IS_WRITTEN); + if (ret < 0) + ksft_exit_fail_msg("%s fast scan failed\n", __func__); + for (i = 0; i < ret; i++) + fast += LEN(regions[i]); + + /* Generic path: same query expressed via category_anyof_mask. */ + ret = pagemap_ioctl(mem, mem_size, regions, npages, 0, 0, + 0, PAGE_IS_WRITTEN, 0, PAGE_IS_WRITTEN); + if (ret < 0) + ksft_exit_fail_msg("%s generic scan failed\n", __func__); + for (i = 0; i < ret; i++) + slow += LEN(regions[i]); + + ksft_test_result(fast == npages && slow == npages, + "%s unpopulated ptes reported written by both paths (%ld, %ld of %d)\n", + __func__, fast, slow, npages); + + wp_free(mem, mem_size); + munmap(mem, mem_size); +} + int sanity_tests(void) { unsigned long long mem_size, vec_size; @@ -1559,7 +1610,7 @@ int main(int __attribute__((unused)) argc, char *argv[]) if (!hugetlb_setup_default(4)) ksft_print_msg("HugeTLB test will be skipped\n"); - ksft_set_plan(117); + ksft_set_plan(118); page_size = getpagesize(); hpage_size = read_pmd_pagesize(); @@ -1737,6 +1788,9 @@ int main(int __attribute__((unused)) argc, char *argv[]) /* 17. ZEROPFN tests */ zeropfn_tests(); + /* 18. Unpopulated pte scan-path consistency */ + unpopulated_scan_test(); + close(pagemap_fd); ksft_finished(); } -- cgit v1.2.3 From 63867c82d0c0c2d182016a32b1cc0103116b0ea5 Mon Sep 17 00:00:00 2001 From: Kefeng Wang Date: Mon, 6 Jul 2026 19:19:58 +0800 Subject: mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE pte_pfn() and pte_dirty() have undefined behaviour when called on a non-present PTE. In migrate_vma_collect_pmd(), these functions may be invoked on non-present entries (e.g., device-private entries), leading to potential crashes from pte_pfn() or incorrect dirty folio accounting from pte_dirty(). Fix both by guarding with pte_present() checks. Link: https://lore.kernel.org/20260708003955.4024340-1-wangkefeng.wang@huawei.com Link: https://lore.kernel.org/20260706111958.3649651-1-wangkefeng.wang@huawei.com Fixes: fd35ca3d12cc ("mm/migrate_device.c: copy pte dirty bit to page") Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Kefeng Wang Reviewed-by: Balbir Singh Acked-by: Zi Yan Cc: Alistair Popple Cc: Byungchul Park Cc: David Hildenbrand Cc: Gregory Price Cc: "Huang, Ying" Cc: Joshua Hahn Cc: Matthew Brost Cc: Rakie Kim Cc: Ying Huang Cc: Signed-off-by: Andrew Morton --- mm/migrate_device.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/migrate_device.c b/mm/migrate_device.c index 554754eb26ff..908d2d4ec43a 100644 --- a/mm/migrate_device.c +++ b/mm/migrate_device.c @@ -401,7 +401,8 @@ again: bool anon_exclusive; pte_t swp_pte; - flush_cache_page(vma, addr, pte_pfn(pte)); + if (pte_present(pte)) + flush_cache_page(vma, addr, pte_pfn(pte)); anon_exclusive = folio_test_anon(folio) && PageAnonExclusive(page); if (anon_exclusive) { @@ -422,7 +423,7 @@ again: migrate->cpages++; /* Set the dirty flag on the folio now the pte is gone. */ - if (pte_dirty(pte)) + if (pte_present(pte) && pte_dirty(pte)) folio_mark_dirty(folio); /* Setup special migration page table entry */ -- cgit v1.2.3 From 83abe2fd5b3aeb3123b5408a5a91709c5538fb23 Mon Sep 17 00:00:00 2001 From: "Kiryl Shutsemau (Meta)" Date: Wed, 8 Jul 2026 10:01:10 +0100 Subject: mm/hugetlb: fix swap entry corruption when clearing uffd-wp at fork() copy_hugetlb_page_range() clears the uffd-wp bit of migration and hwpoison entries with huge_pte_clear_uffd_wp(), which operates on the present-PTE bit position. Swap entries keep the uffd-wp state elsewhere -- the migration branch reads and sets it with pte_swp_uffd_wp() and pte_swp_mkuffd_wp() -- and the present-PTE position falls into the swap payload. On x86-64 it lands in the inverted swap offset, where a naturally-aligned hugetlb PFN always has the affected bit set, so the clear advances the encoded PFN by two pages. No userfaultfd needs to be involved: the clear is guarded only by the child VMA not being uffd-wp registered, so a plain fork() with an in-flight hugetlb migration entry (or a poisoned hugetlb page) corrupts the entry copied into the child. Instrumenting the clear and forking after MADV_HWPOISON on a 2MB anon hugetlb page shows: offset before=120e00 offset after =120e02 The fallout is mostly latent: rmap walks match migration entries by folio range and remove_migration_pte() rebuilds the PTE from the folio, so a within-folio PFN skew heals once migration completes. But any path that re-encodes the corrupted offset -- e.g. hugetlb_change_protection() rewriting a writable migration entry via make_readable_migration_entry(swp_offset(entry)) -- propagates it. Migration entries legitimately carry uffd-wp, so clear it with pte_swp_clear_uffd_wp(), matching copy_nonpresent_pte() and move_huge_pte(). A hwpoison entry, on the other hand, never carries the uffd-wp bit: it is installed fresh by make_hwpoison_entry() (try_to_unmap_one() does not preserve uffd-wp on the hwpoison path) and hugetlb_change_protection() leaves hwpoison entries untouched. There was nothing to clear there, only the corruption, so drop the clear entirely. Link: https://lore.kernel.org/20260708090110.136162-1-kirill@shutemov.name Fixes: bc70fbf269fd ("mm/hugetlb: handle uffd-wp during fork()") Signed-off-by: Kiryl Shutsemau Reported-by: Sashiko AI review Closes: https://lore.kernel.org/all/20260703140011.99E601F000E9@smtp.kernel.org/ Suggested-by: David Hildenbrand Acked-by: David Hildenbrand (Arm) Assisted-by: Claude:claude-fable-5 Cc: Muchun Song Cc: Oscar Salvador Cc: Peter Xu Cc: Signed-off-by: Andrew Morton --- mm/hugetlb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 571212b80835..bca2707d02e3 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -4917,8 +4917,12 @@ again: softleaf = softleaf_from_pte(entry); if (unlikely(softleaf_is_hwpoison(softleaf))) { - if (!userfaultfd_wp(dst_vma)) - entry = huge_pte_clear_uffd_wp(entry); + /* + * A hwpoison entry never carries the uffd-wp bit: it is + * installed fresh by make_hwpoison_entry() and + * hugetlb_change_protection() leaves it untouched, so + * there is nothing to clear for the child. + */ set_huge_pte_at(dst, addr, dst_pte, entry, sz); } else if (unlikely(softleaf_is_migration(softleaf))) { bool uffd_wp = pte_swp_uffd_wp(entry); @@ -4936,7 +4940,7 @@ again: set_huge_pte_at(src, addr, src_pte, entry, sz); } if (!userfaultfd_wp(dst_vma)) - entry = huge_pte_clear_uffd_wp(entry); + entry = pte_swp_clear_uffd_wp(entry); set_huge_pte_at(dst, addr, dst_pte, entry, sz); } else if (unlikely(pte_is_marker(entry))) { const pte_marker marker = copy_pte_marker(softleaf, dst_vma); -- cgit v1.2.3 From 7441d6348c70738e9ed307510db171c7a9b3f4bf Mon Sep 17 00:00:00 2001 From: Aboorva Devarajan Date: Thu, 9 Jul 2026 01:49:54 +0530 Subject: mm/util: don't read __page_2 for order-1 folios in snapshot_page() snapshot_page() currently reads __page_2 after checking nr_pages > 1, but it should only do so when nr_pages > 2. If an order-1 folio is allocated at the end of a vmemmap section, __page_2 will not exist and reading it will cause a fault. During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed on the page isolation path while reading an order-1 folio's __page_2 from an adjacent absent section (unmapped vmemmap). Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap hole). Link: https://lore.kernel.org/20260708201954.686111-1-aboorvad@linux.ibm.com Fixes: 31a31da8a618 ("mm: move _pincount in folio to page[2] on 32bit") Signed-off-by: Aboorva Devarajan Reported-by: Sourabh Jain Acked-by: David Hildenbrand (Arm) Reviewed-by: Lorenzo Stoakes Reviewed-by: Matthew Wilcox (Oracle) Reviewed-by: Luiz Capitulino Cc: Liam R. Howlett Cc: Michal Hocko Cc: Mike Rapoport Cc: "Ritesh Harjani (IBM)" Cc: Suren Baghdasaryan Cc: Vlastimil Babka Cc: # v6.15+ Signed-off-by: Andrew Morton --- mm/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/util.c b/mm/util.c index af2c2103f0d9..34cb43b3eaa4 100644 --- a/mm/util.c +++ b/mm/util.c @@ -1353,7 +1353,7 @@ again: if (ps->idx < MAX_FOLIO_NR_PAGES) { memcpy(&ps->folio_snapshot, foliop, 2 * sizeof(struct page)); nr_pages = folio_nr_pages(&ps->folio_snapshot); - if (nr_pages > 1) + if (nr_pages > 2) memcpy(&ps->folio_snapshot.__page_2, &foliop->__page_2, sizeof(struct page)); set_ps_flags(ps, foliop, page); -- cgit v1.2.3 From 89b1b79c308818a715e75f28744b70d8940a07c9 Mon Sep 17 00:00:00 2001 From: Zi Yan Date: Thu, 9 Jul 2026 15:12:01 -0400 Subject: mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk() In pcpu_create_chunk(), nr_pages is the total contiguous backing allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated() uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap. Since bit N in chunk->populated means page offset N inside every unit is backed. When nr_units > 1, the function writes beyond chunk->populated. Fix it by using chunk->nr_pages. It also fixes the global pcpu_nr_empty_pop_pages accounting, since pcpu_balance_free() only iterates up to chunk->nr_pages. Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap properly") introduced the bitmap overflow issue. Later, commit b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the accounting issue. Link: https://lore.kernel.org/20260709-fix-pcpu_create_chunk-in-percpu-km-v1-1-1f64745a84cc@nvidia.com Fixes: a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap properly") Reported-by: Sashiko Closes: https://sashiko.dev/#/patchset/20260703-keep-subpage-private-zero-at-free-v2-0-2970fe777dd6%40nvidia.com?part=1 Assisted-by: Codex:GPT-5 Signed-off-by: Zi Yan Acked-by: Dennis Zhou Cc: Christoph Lameter Cc: Tejun Heo Cc: Zi Yan Cc: Signed-off-by: Andrew Morton --- mm/percpu-km.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/percpu-km.c b/mm/percpu-km.c index 4efa74a495cb..dc096b5a6ce4 100644 --- a/mm/percpu-km.c +++ b/mm/percpu-km.c @@ -75,7 +75,7 @@ static struct pcpu_chunk *pcpu_create_chunk(gfp_t gfp) chunk->base_addr = page_address(pages); spin_lock_irqsave(&pcpu_lock, flags); - pcpu_chunk_populated(chunk, 0, nr_pages); + pcpu_chunk_populated(chunk, 0, chunk->nr_pages); spin_unlock_irqrestore(&pcpu_lock, flags); pcpu_stats_chunk_alloc(); -- cgit v1.2.3 From df8ce7ab48d01ac4f247599b35f0506d95ff57e1 Mon Sep 17 00:00:00 2001 From: Joseph Qi Date: Fri, 10 Jul 2026 12:05:12 +0800 Subject: ocfs2: fix boundary check in ocfs2_check_dir_entry() to use buffer offset Commit 390ac56cf0f6 ("ocfs2: add boundary check to ocfs2_check_dir_entry()") added an out-of-bounds guard using the caller-supplied 'offset' argument: if (offset > size - OCFS2_DIR_REC_LEN(1)) return 0; However, 'offset' and 'size' are not measured against the same base for all callers. In the block-based lookup path, ocfs2_find_entry_el() passes 'offset' as an absolute offset into the whole directory: i = ocfs2_search_dirblock(bh, dir, name, namelen, block << sb->s_blocksize_bits, bh->b_data, sb->s_blocksize, res_dir); while 'size' is a single block size (sb->s_blocksize). For any directory entry located in the second or later block, 'offset' is >= sb->s_blocksize, so the guard rejects every such entry even though it is perfectly valid and lies entirely within its block buffer. This makes mounting fail for filesystems whose system directory spans more than one block, e.g. a volume formatted with a small block size: mkfs.ocfs2 -b 512 -C 4096 -N 2 -T datafiles --fs-features=usrquota,grpquota ocfs2_check_dir_entry:314 ERROR: directory entry (#18: offset=512) too close to end or out-of-bounds ocfs2_init_local_system_inodes:496 ERROR: status=-22, sysfile=12, slot=0 ocfs2_mount_volume:1757 ERROR: status = -22 The dirent's position within the buffer being validated is ((char *)de - buf), which is what the rest of the function already uses (via next_offset) and what must be bounds-checked against 'size'. Compute that buffer-relative offset and use it for the guard. The subtraction is reordered to size - buf_offset < OCFS2_DIR_REC_LEN(1) to avoid an unsigned underflow when size is smaller than the minimal record length. Link: https://lore.kernel.org/20260710040512.3310736-1-joseph.qi@linux.alibaba.com Fixes: 390ac56cf0f6 ("ocfs2: add boundary check to ocfs2_check_dir_entry()") Signed-off-by: Joseph Qi Reviewed-by: Dmitry Antipov Tested-by: Dmitry Antipov Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Cc: Signed-off-by: Andrew Morton --- fs/ocfs2/dir.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index 8e6b03238327..d7fc3cccf2f4 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -302,10 +302,11 @@ static int ocfs2_check_dir_entry(struct inode *dir, unsigned long offset) { const char *error_msg = NULL; + unsigned long buf_offset = (char *)de - buf; unsigned long next_offset; int rlen; - if (offset > size - OCFS2_DIR_REC_LEN(1)) { + if (buf_offset > size || size - buf_offset < OCFS2_DIR_REC_LEN(1)) { /* Dirent is (maybe partially) beyond the buffer * boundaries so touching 'de' members is unsafe. */ @@ -316,7 +317,7 @@ static int ocfs2_check_dir_entry(struct inode *dir, } rlen = le16_to_cpu(de->rec_len); - next_offset = ((char *) de - buf) + rlen; + next_offset = buf_offset + rlen; if (unlikely(rlen < OCFS2_DIR_REC_LEN(1))) error_msg = "rec_len is smaller than minimal"; -- cgit v1.2.3 From e3a0127eee04db8769e53c8102c4e76aa49be8c3 Mon Sep 17 00:00:00 2001 From: Jori Koolstra Date: Fri, 10 Jul 2026 19:17:35 +0200 Subject: selftest: fix headers in fclog.c fclog.c does not compile because it is missing fcntl.h, needed for O_RDONLY etc. There are also some redundant includes that are also in kselftest_harness.h. Link: https://lore.kernel.org/20260710171741.837308-1-jkoolstra@xs4all.nl Signed-off-by: Jori Koolstra Cc: Aleksa Sarai Cc: Shuah Khan Cc: Wei Yang Cc: Christian Brauner Cc: Signed-off-by: Andrew Morton --- tools/testing/selftests/filesystems/fclog.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/tools/testing/selftests/filesystems/fclog.c b/tools/testing/selftests/filesystems/fclog.c index 551c4a0f395a..593a5136e991 100644 --- a/tools/testing/selftests/filesystems/fclog.c +++ b/tools/testing/selftests/filesystems/fclog.c @@ -6,10 +6,8 @@ #include #include +#include #include -#include -#include -#include #include #include -- cgit v1.2.3 From de4660898b7aa7e03d3b120a6bfa6b26211e4e77 Mon Sep 17 00:00:00 2001 From: Qi Zheng Date: Fri, 10 Jul 2026 23:43:18 +0800 Subject: mm: mglru: fix stale batch updates after memcg reparenting The mglru page table walker batches per-generation size deltas in walk->nr_pages while walking page tables without holding the lruvec lock. The reset_batch_size() later folds those deltas into walk->lruvec under the lruvec lock. The page table walker can run concurrently with the memcg reparenting path as follows: CPU0 CPU1 ==== ==== walk_mm --> walk_page_range --> update_batch_size --> walk->nr_pages += delta mem_cgroup_css_offline --> memcg_reparent_objcgs --> lock lruvec lru_gen_reparent_memcg --> reparent child folios to parent unlock lruvec lock lruvec reset_batch_size --> child lrugen->nr_pages += delta This will trigger the following warning in lru_gen_exit_memcg(): VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0, sizeof(lruvec->lrugen.nr_pages))); And the user-visible impact of underestimated nr_pages in MGLRU was premature OOMs because MGLRU does not try to reclaim memory when nr_pages reaches zero, but there are still more pages. To fix it, make reset_batch_size() check CSS_DYING under RCU before flushing the pending batch. A non-dying memcg keeps the original lruvec stable against RCU-delayed offlining; a dying memcg redirects the deltas to the first non-dying ancestor. Link: https://lore.kernel.org/20260710154318.75388-1-qi.zheng@linux.dev Fixes: f304652609ea ("mm: vmscan: prepare for reparenting MGLRU folios") Signed-off-by: Qi Zheng Reported-by: Peiyang He Closes: https://lore.kernel.org/all/5A9E929D82717101+12fcf643-efb8-4b9a-a53a-1e28cc894f0b@smail.nju.edu.cn Reviewed-by: Harry Yoo (Oracle) Acked-by: Johannes Weiner Acked-by: Shakeel Butt Cc: Axel Rasmussen Cc: Barry Song Cc: David Hildenbrand Cc: Kairui Song Cc: Lorenzo Stoakes Cc: Michal Hocko Cc: Muchun Song Cc: Roman Gushchin Cc: Wei Xu Cc: Yuanchu Xie Cc: Signed-off-by: Andrew Morton --- include/linux/memcontrol.h | 25 +++++++++++++++++++++++++ mm/vmscan.c | 11 ++++------- 2 files changed, 29 insertions(+), 7 deletions(-) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index e1f46a0016fc..957260677678 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -1472,6 +1472,31 @@ static inline void lruvec_lock_irq(struct lruvec *lruvec) spin_lock_irq(&lruvec->lru_lock); } +static inline struct lruvec *lruvec_live_lock_irq(struct lruvec *lruvec) +{ +#ifdef CONFIG_MEMCG + struct pglist_data *pgdat = lruvec_pgdat(lruvec); + struct mem_cgroup *memcg = lruvec_memcg(lruvec); + + rcu_read_lock(); + + /* + * The memcg can be NULL when the memory controller is disabled. + * Otherwise, the caller keeps the memcg owning @lruvec alive. + */ + while (unlikely(memcg && css_is_dying(&memcg->css))) { + memcg = parent_mem_cgroup(memcg); + lruvec = mem_cgroup_lruvec(memcg, pgdat); + } + + spin_lock_irq(&lruvec->lru_lock); +#else + lruvec_lock_irq(lruvec); +#endif + + return lruvec; +} + static inline void lruvec_unlock(struct lruvec *lruvec) { spin_unlock(&lruvec->lru_lock); diff --git a/mm/vmscan.c b/mm/vmscan.c index 35c3bb15ae96..1a142c58700d 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -3265,7 +3265,7 @@ static void update_batch_size(struct lru_gen_mm_walk *walk, struct folio *folio, static void reset_batch_size(struct lru_gen_mm_walk *walk) { int gen, type, zone; - struct lruvec *lruvec = walk->lruvec; + struct lruvec *lruvec = lruvec_live_lock_irq(walk->lruvec); struct lru_gen_folio *lrugen = &lruvec->lrugen; walk->batched = 0; @@ -3285,6 +3285,8 @@ static void reset_batch_size(struct lru_gen_mm_walk *walk) lru += LRU_ACTIVE; __update_lru_size(lruvec, lru, zone, delta); } + + lruvec_unlock_irq(lruvec); } static int should_skip_vma(unsigned long start, unsigned long end, struct mm_walk *args) @@ -3779,11 +3781,8 @@ static void walk_mm(struct mm_struct *mm, struct lru_gen_mm_walk *walk) mmap_read_unlock(mm); } - if (walk->batched) { - lruvec_lock_irq(lruvec); + if (walk->batched) reset_batch_size(walk); - lruvec_unlock_irq(lruvec); - } cond_resched(); } while (err == -EAGAIN); @@ -4867,9 +4866,7 @@ retry: walk = current->reclaim_state->mm_walk; if (walk && walk->batched) { walk->lruvec = lruvec; - lruvec_lock_irq(lruvec); reset_batch_size(walk); - lruvec_unlock_irq(lruvec); } mod_lruvec_state(lruvec, PGDEMOTE_KSWAPD + reclaimer_offset(sc), -- cgit v1.2.3 From dd9623f58ec702a07b2d67179d6fcea79c52231a Mon Sep 17 00:00:00 2001 From: Xiangfeng Cai Date: Tue, 14 Jul 2026 01:14:55 +0800 Subject: mm/hugetlb: fix list corruption in allocate_file_region_entries() allocate_file_region_entries() tops up resv->region_cache with freshly allocated file_region descriptors. The allocation uses GFP_KERNEL, so resv->lock is dropped around it: the new entries are gathered on a stack-local list head, allocated_regions, and spliced into resv->region_cache once the lock is re-acquired. The splice used list_splice(), which moves the entries but does not re-initialize the source head, so allocated_regions is left pointing at an entry that now lives on resv->region_cache. The top-up runs in a while loop that re-checks the cache deficit after re-acquiring the lock. For a shared mapping the resv_map is shared by every mapper of the hugetlbfs inode, so a concurrent region_chg()/region_add()/region_del() on the same resv_map can consume cache entries during the unlocked window and force a second iteration. That iteration calls list_add() on the stale head and corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check trips: list_add corruption. next->prev should be prev (ffffc900011ff7f8), but was ffff88814c281460. (next=ffff88814c545640). kernel BUG at lib/list_debug.c:31! allocate_file_region_entries+0x191/0x420 region_chg+0x267/0x300 hugetlb_reserve_pages+0x387/0xc80 hugetlbfs_file_mmap+0x2ce/0x3f0 mmap_region+0x1348/0x1a80 do_mmap+0x85e/0xb90 vm_mmap_pgoff+0x18c/0x330 ksys_mmap_pgoff+0x2a1/0x3e0 do_syscall_64+0xd7/0x420 Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack address into resv->region_cache, leading to later use-after-free. This was observed as a real host panic on a dense KVM host where a QEMU guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one shared resv_map. Use list_splice_init() so the source head is re-initialized empty after each splice, making the retry loop safe. Link: https://lore.kernel.org/20260713171456.300518-2-caixiangfeng@bytedance.com Fixes: d3ec7b6e09e5 ("mm/hugetlb: use list_splice to merge two list at once") Signed-off-by: Xiangfeng Cai Reviewed-by: Muchun Song Cc: Baoquan He Cc: David Hildenbrand Cc: Oscar Salvador Cc: Shuah Khan Cc: Wei Yang Cc: Signed-off-by: Andrew Morton --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index bca2707d02e3..e93c4d2456aa 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -693,7 +693,7 @@ static int allocate_file_region_entries(struct resv_map *resv, spin_lock(&resv->lock); - list_splice(&allocated_regions, &resv->region_cache); + list_splice_init(&allocated_regions, &resv->region_cache); resv->region_cache_count += to_allocate; } -- cgit v1.2.3 From 40de8160ca7f67d14619ee0351ce5d68fc4a237a Mon Sep 17 00:00:00 2001 From: "Kiryl Shutsemau (Meta)" Date: Wed, 15 Jul 2026 15:42:33 +0100 Subject: fs/proc/task_mmu: fix PAGEMAP_SCAN written state for PMD holes PAGEMAP_SCAN reports an unpopulated PTE in a uffd-wp VMA as written, but a range with no page table at all -- a PMD hole -- is skipped: pagemap_scan_pte_hole() tests p->cur_vma_category, which never carries PAGE_IS_WRITTEN, so the hole is neither reported nor (under PM_SCAN_WP_MATCHING) armed. In a uffd-wp VMA, WP_UNPOPULATED installs uffd-wp markers when protecting a range, allocating page tables as needed, so an unpopulated slot is treated as written -- see the pte_none() handling in pagemap_page_category(). A missing marker therefore means the range was zapped, e.g. via MADV_DONTNEED. This applies to anon and shmem VMAs. An anonymous THP is write-protected in place as a huge PMD, so a full-PMD MADV_DONTNEED clears it to pmd_none -- a hole with no page table -- and pagemap_scan_pte_hole() misses it. For a MAP_PRIVATE|MAP_ANON mapping MADV_DONTNEED has fill-with-zeros semantics, so a write-tracking checkpoint/migration tool (e.g. CRIU) treats the range as unchanged and keeps its previous contents; after restore or live migration the process reads stale data instead of zeroes -- data corruption. Report a hole in a non-hugetlb uffd-wp VMA as written, matching the pte_none handling in pagemap_page_category(); the existing PM_SCAN_WP_MATCHING path then arms it via uffd_wp_range(). hugetlb is excluded: pagemap_hugetlb_category() reports an empty hugetlb entry (huge_pte_none) as not-written, unlike pagemap_page_category(), which reports pte_none as written. pagemap_scan_pte_hole() fires for a hugetlb slot only when it has no page table; keeping that not-written matches how an allocated-but-empty hugetlb entry reads, so the hole and the empty-entry cases agree within the VMA. Link: https://lore.kernel.org/20260715144234.442721-2-kirill@shutemov.name Fixes: 2bad466cc9d9 ("mm/uffd: UFFD_FEATURE_WP_UNPOPULATED") Signed-off-by: Kiryl Shutsemau Reported-by: Sashiko AI review Closes: https://sashiko.dev/#/patchset/20260707151349.92143-1-kirill@shutemov.name Tested-by: Muhammad Usama Anjum Acked-by: David Hildenbrand (Arm) Cc: Peter Xu Cc: Jann Horn Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Michal Hocko Cc: Mike Rapoport Cc: Pedro Falcato Cc: Shuah Khan Cc: Suren Baghdasaryan Cc: Vlastimil Babka Cc: Zenghui Yu Assisted-by: Claude:claude-fable-5 Cc: Signed-off-by: Andrew Morton --- fs/proc/task_mmu.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index d45c729ab6bb..229d1fc3d7f1 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -3049,12 +3049,28 @@ static int pagemap_scan_pte_hole(unsigned long addr, unsigned long end, { struct pagemap_scan_private *p = walk->private; struct vm_area_struct *vma = walk->vma; + unsigned long categories; int ret, err; - if (!vma || !pagemap_scan_is_interesting_page(p->cur_vma_category, p)) + if (!vma) + return 0; + + /* + * In a uffd-wp VMA an unpopulated range is treated as written: + * uffd-wp registration populates page tables and installs markers + * with WP_UNPOPULATED, so a missing marker means the range was + * zapped. See the pte_none() handling in pagemap_page_category(). + * + * hugetlb differs, see pagemap_hugetlb_category(). + */ + categories = p->cur_vma_category; + if (userfaultfd_wp(vma) && !is_vm_hugetlb_page(vma)) + categories |= PAGE_IS_WRITTEN; + + if (!pagemap_scan_is_interesting_page(categories, p)) return 0; - ret = pagemap_scan_output(p->cur_vma_category, p, addr, &end); + ret = pagemap_scan_output(categories, p, addr, &end); if (addr == end) return ret; -- cgit v1.2.3 From 6881f45d0eb541f2cee8c37c84b3860a23823bb3 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Sat, 4 Jul 2026 17:58:56 +0930 Subject: btrfs: fix leaking BTRFS_FS_STATE_REMOUNTING flag [BUG] The following script can lead to unexpected qgroup rescan failure: # mkfs.btrfs -f -O quota $dev # mount $dev $mnt # mount -o remount,rescue=ibadroots $mnt ^^^^^ This above command is expected to fail # btrfs quota rescan -w $mnt ^^^^^ The above qgroup rescan is not expected to fail # btrfs qgroup show $mnt WARNING: qgroup data inconsistent, rescan recommended Qgroupid Referenced Exclusive Path -------- ---------- --------- ---- 0/5 16.00KiB 16.00KiB The above short script will be converted to a proper fstests case. [CAUSE] Inside btrfs_reconfigure(), if either btrfs_check_options() or btrfs_check_features() failed, we will always have BTRFS_FS_STATE_REMOUNTING set for the fs until the next successful remount. That BTRFS_FS_STATE_REMOUNTING flag will interrupt several operations, including: - Qgroup rescan - Auto defrag - Space reclaim [FIX] Change the error handling of btrfs_check_options() and btrfs_check_features() to goto restore label. Fixes: eddb1a433f26 ("btrfs: add reconfigure callback for fs_context") Reviewed-by: Johannes Thumshirn Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/super.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index c946bccf0748..63bf1f1e16d4 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1519,12 +1519,14 @@ static int btrfs_reconfigure(struct fs_context *fc) sync_filesystem(sb); set_bit(BTRFS_FS_STATE_REMOUNTING, &fs_info->fs_state); - if (!btrfs_check_options(fs_info, &ctx->mount_opt, fc->sb_flags)) - return -EINVAL; + if (!btrfs_check_options(fs_info, &ctx->mount_opt, fc->sb_flags)) { + ret = -EINVAL; + goto restore; + } ret = btrfs_check_features(fs_info, !(fc->sb_flags & SB_RDONLY)); if (ret < 0) - return ret; + goto restore; btrfs_ctx_to_info(fs_info, ctx); btrfs_remount_begin(fs_info, old_ctx.mount_opt, fc->sb_flags); -- cgit v1.2.3 From 1ebe51c29fa9755d5b2fea28727c051117907cf8 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Fri, 3 Jul 2026 07:54:40 +0200 Subject: btrfs: zoned: fix deadlock between metadata writeback and transaction commit When writing out metadata extent buffers in a zoned filesystem, btree_writepages() holds fs_info->zoned_meta_io_lock across the whole writeback loop, including the call to btrfs_check_meta_write_pointer() -> check_bg_is_active(). For the tree-log block group, check_bg_is_active() may fail to activate the zone and fall back to btrfs_zone_finish_one_bg() to free an active zone. That path waits for the running transaction to commit while still holding zoned_meta_io_lock, but the committer needs that same lock to write out the tree extents, so the two tasks deadlock: Task A (kworker, metadata writeback) Task B (fsstress, transaction commit) ------------------------------------ ------------------------------------- wb_workfn() btrfs_commit_transaction(T) btree_writepages() btrfs_write_and_wait_transaction() btrfs_zoned_meta_io_lock() btrfs_write_marked_extents() btrfs_check_meta_write_pointer() btree_writepages() check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock() btrfs_zone_finish_one_bg() do_zone_finish() btrfs_inc_block_group_ro() btrfs_wait_for_commit() The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock around do_zone_finish() for this exact reason. Do the same in the tree-log branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire it afterwards. The lock only protects fs_info->active_{meta,system}_bg, which this branch does not touch, and ctx->zoned_bg keeps a reference to the block group across the unlock, so nothing is lost while the lock is dropped. This hang occasionally reproduces with fstests generic/475 on a zoned btrfs filesystem. Fixes: 13bb483d32ab ("btrfs: zoned: activate metadata block group on write time") Reviewed-by: Naohiro Aota Signed-off-by: Johannes Thumshirn Signed-off-by: David Sterba --- fs/btrfs/zoned.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/zoned.c b/fs/btrfs/zoned.c index 97f06dd01693..44a13ed6b8b2 100644 --- a/fs/btrfs/zoned.c +++ b/fs/btrfs/zoned.c @@ -2190,7 +2190,11 @@ static bool check_bg_is_active(struct btrfs_eb_write_context *ctx, if (fs_info->treelog_bg == block_group->start) { if (!btrfs_zone_activate(block_group)) { - int ret_fin = btrfs_zone_finish_one_bg(fs_info); + int ret_fin; + + btrfs_zoned_meta_io_unlock(fs_info); + ret_fin = btrfs_zone_finish_one_bg(fs_info); + btrfs_zoned_meta_io_lock(fs_info); if (ret_fin != 1 || !btrfs_zone_activate(block_group)) return false; -- cgit v1.2.3 From 5fabb1cf25d723274009d7b759545fd59f230c9d Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Fri, 3 Jul 2026 07:54:45 +0200 Subject: btrfs: zoned: reset meta_write_pointer on zone reset btrfs_reset_unused_block_groups() resets a block group's zone and sets alloc_offset back to 0 so the space can be reused, but it leaves meta_write_pointer pointing at the previous end of the zone. Once the block group is reactivated and reused for metadata, newly allocated tree blocks live before that stale write pointer. btrfs_check_meta_write_pointer() then sees them behind the write pointer, so they can never be written out in sequential order: the dirty extent buffers are stranded and pin their btree_inode folios until unmount. Reset meta_write_pointer back to the start of the block group for metadata and system block groups. Fixes: 453a73c3069a ("btrfs: zoned: reclaim unused zone by zone resetting") Reviewed-by: Naohiro Aota Signed-off-by: Johannes Thumshirn Signed-off-by: David Sterba --- fs/btrfs/zoned.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/fs/btrfs/zoned.c b/fs/btrfs/zoned.c index 44a13ed6b8b2..0706c0788cb2 100644 --- a/fs/btrfs/zoned.c +++ b/fs/btrfs/zoned.c @@ -3189,6 +3189,17 @@ int btrfs_reset_unused_block_groups(struct btrfs_space_info *space_info, u64 num reclaimed = bg->alloc_offset; bg->zone_unusable = bg->length - bg->zone_capacity; bg->alloc_offset = 0; + /* + * The zone was just reset to empty, so alloc_offset went back to + * the start of the zone. For metadata/system block groups the + * write pointer must follow it back to the start of the zone; + * otherwise it stays stale at the previous (finished) zone end, + * and metadata written into the reused zone would sit behind the + * write pointer, could never be written out in sequential order, + * and would be stranded (pinning its folio) until unmount. + */ + if (bg->flags & (BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_SYSTEM)) + bg->meta_write_pointer = bg->start; /* * This holds because we currently reset fully used then freed * block group. -- cgit v1.2.3 From 51a0e8399858621442807a26057bcd1cd3ced046 Mon Sep 17 00:00:00 2001 From: Dongjiang Zhu Date: Mon, 13 Jul 2026 16:50:08 +0800 Subject: btrfs: skip global block reserve accounting for rescue mounts [BUG] Mounting with rescue=ibadroots after corrupting the block group tree root triggers a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000100 RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs] Call Trace: fill_dummy_bgs+0xd4/0x120 [btrfs] open_ctree+0xc6e/0x1ca0 [btrfs] btrfs_get_tree+0x50d/0xa40 [btrfs] The same crash occurs with a corrupted raid stripe tree root, via btrfs_read_block_groups() instead of fill_dummy_bgs(). [CAUSE] With rescue=ibadroots, btrfs_read_roots() allows the mount to continue when either root cannot be read, leaving the corresponding root pointer NULL while its on-disk feature bit remains set. btrfs_update_global_block_rsv() then dereferences the missing root based on the feature bit alone. [FIX] Rescue mounts are fully read-only and cannot start transactions, so the global reserve is never consumed. Under btrfs_is_full_ro(), mark the reserve as full and return before performing the accounting. And since we need to check if the fs is mount fully RO, export fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h. Fixes: 8dbfc14fc736 ("btrfs: account block group tree when calculating global reserve size") Fixes: 515020900d44 ("btrfs: read raid stripe tree from disk") Suggested-by: Qu Wenruo Signed-off-by: Dongjiang Zhu [ Squash the fs_is_full_ro() export commit into this one. ] Reviewed-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/block-rsv.c | 19 +++++++++++++++++-- fs/btrfs/disk-io.c | 11 +---------- fs/btrfs/fs.h | 9 +++++++++ 3 files changed, 27 insertions(+), 12 deletions(-) diff --git a/fs/btrfs/block-rsv.c b/fs/btrfs/block-rsv.c index 9efb3016ef11..c68a8f4b7d19 100644 --- a/fs/btrfs/block-rsv.c +++ b/fs/btrfs/block-rsv.c @@ -322,10 +322,25 @@ void btrfs_block_rsv_add_bytes(struct btrfs_block_rsv *block_rsv, void btrfs_update_global_block_rsv(struct btrfs_fs_info *fs_info) { struct btrfs_block_rsv *block_rsv = &fs_info->global_block_rsv; - struct btrfs_space_info *sinfo = block_rsv->space_info; + struct btrfs_space_info *sinfo; struct btrfs_root *root, *tmp; - u64 num_bytes = btrfs_root_used(&fs_info->tree_root->root_item); unsigned int min_items = 1; + u64 num_bytes; + + /* + * A full read-only mount (rescue options) cannot start transactions, + * so the global reserve is never consumed. Mark it as full and skip + * the accounting. + */ + if (btrfs_is_full_ro(fs_info)) { + spin_lock(&block_rsv->lock); + block_rsv->full = true; + spin_unlock(&block_rsv->lock); + return; + } + + sinfo = block_rsv->space_info; + num_bytes = btrfs_root_used(&fs_info->tree_root->root_item); /* * The global block rsv is based on the size of the extent tree, the diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 0a7d80da9c94..36332df9a0f1 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3288,15 +3288,6 @@ int btrfs_check_features(struct btrfs_fs_info *fs_info, bool is_rw_mount) return 0; } -static bool fs_is_full_ro(const struct btrfs_fs_info *fs_info) -{ - if (!sb_rdonly(fs_info->sb)) - return false; - if (unlikely(fs_info->mount_opt & BTRFS_MOUNT_FULL_RO_MASK)) - return true; - return false; -} - /* * Try to wait for any metadata readahead, and invalidate all btree folios. * @@ -3462,7 +3453,7 @@ int __cold open_ctree(struct super_block *sb, struct btrfs_fs_devices *fs_device WRITE_ONCE(fs_info->fs_error, -EUCLEAN); /* If the fs has any rescue options, no transaction is allowed. */ - if (fs_is_full_ro(fs_info)) + if (btrfs_is_full_ro(fs_info)) WRITE_ONCE(fs_info->fs_error, -EROFS); /* Set up fs_info before parsing mount options */ diff --git a/fs/btrfs/fs.h b/fs/btrfs/fs.h index 5f0cfb0b5466..7ee9ec2b0efb 100644 --- a/fs/btrfs/fs.h +++ b/fs/btrfs/fs.h @@ -1159,6 +1159,15 @@ void __btrfs_clear_fs_compat_ro(struct btrfs_fs_info *fs_info, u64 flag, #define btrfs_test_opt(fs_info, opt) ((fs_info)->mount_opt & \ BTRFS_MOUNT_##opt) +static inline bool btrfs_is_full_ro(const struct btrfs_fs_info *fs_info) +{ + if (!sb_rdonly(fs_info->sb)) + return false; + if (unlikely(fs_info->mount_opt & BTRFS_MOUNT_FULL_RO_MASK)) + return true; + return false; +} + static inline bool btrfs_fs_closing(const struct btrfs_fs_info *fs_info) { return unlikely(test_bit(BTRFS_FS_CLOSING_START, &fs_info->flags)); -- cgit v1.2.3 From c438d34ec1eed4d23e2081d61c5e96f5176898a9 Mon Sep 17 00:00:00 2001 From: Dongjiang Zhu Date: Mon, 13 Jul 2026 16:50:10 +0800 Subject: btrfs: report missing raid stripe tree root during lookup When rescue=ibadroots ignores a failure to load the raid stripe tree root, fs_info->stripe_root remains NULL. After the rescue mount proceeds, reading file data that requires the raid stripe tree reaches btrfs_get_raid_extent_offset(). Currently btrfs_search_slot() handles the NULL root and returns -EINVAL. This avoids a NULL pointer dereference, but provides no diagnostic and incorrectly describes missing filesystem metadata as an invalid argument. Check stripe_root before allocating a path, emit a rate-limited error with the logical address, and return -EUCLEAN. Lookups with a valid stripe root are unchanged. Reviewed-by: Qu Wenruo Signed-off-by: Dongjiang Zhu Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/raid-stripe-tree.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/btrfs/raid-stripe-tree.c b/fs/btrfs/raid-stripe-tree.c index 454a95bf542a..b210371ce91e 100644 --- a/fs/btrfs/raid-stripe-tree.c +++ b/fs/btrfs/raid-stripe-tree.c @@ -414,6 +414,12 @@ int btrfs_get_raid_extent_offset(struct btrfs_fs_info *fs_info, int slot; int ret; + if (unlikely(!stripe_root)) { + btrfs_err_rl(fs_info, "missing raid stripe tree root for logical %llu", + logical); + return -EUCLEAN; + } + stripe_key.objectid = logical; stripe_key.type = BTRFS_RAID_STRIPE_KEY; stripe_key.offset = 0; -- cgit v1.2.3 From 330dcc553f282e8dc0b88c9495b4c296465364e1 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Sun, 12 Jul 2026 13:12:51 +0930 Subject: btrfs: raid56: fix an incorrect csum skip during scrub Commit 7425a2894019 ("btrfs: introduce btrfs_bio_for_each_block_all() helper") uses the new helper to replace the nested loop inside verify_bio_data_sectors(), which simplifies the code. However that also changed the behavior of "continue" when a block has no data checksum. Previously the "continue" would skip the old for() loop, which would also increase @total_sector_nr. Now the "continue" will skip the new btrfs_bio_for_each_block_all() loop, which doesn't update @total_sector_nr. This means if we hit a block that has no data checksum, we will skip all the remaining blocks no matter if they have data checksum. As @total_sector_nr will never be updated, and that test_bit() will always return false. Fix it by increasing @total_sector_nr before calling "continue". Fixes: 7425a2894019 ("btrfs: introduce btrfs_bio_for_each_block_all() helper") Reviewed-by: Daniel Vacek Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/raid56.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c index f7f7db40994c..3f2896e793e3 100644 --- a/fs/btrfs/raid56.c +++ b/fs/btrfs/raid56.c @@ -1679,8 +1679,10 @@ static void verify_bio_data_sectors(struct btrfs_raid_bio *rbio, continue; /* No csum for this sector, skip to the next sector. */ - if (!test_bit(total_sector_nr, rbio->csum_bitmap)) + if (!test_bit(total_sector_nr, rbio->csum_bitmap)) { + total_sector_nr++; continue; + } expected_csum = rbio->csum_buf + total_sector_nr * fs_info->csum_size; btrfs_calculate_block_csum_pages(fs_info, paddrs, csum_buf); -- cgit v1.2.3 From 8bc4d7209611e8aa9d5409b6a4a86a9eb91b69a3 Mon Sep 17 00:00:00 2001 From: Guanghui Yang <3497809730@qq.com> Date: Tue, 14 Jul 2026 17:55:43 +0800 Subject: btrfs: zoned: fix missing chunk metadata reservation reserve_chunk_space() stores the return value of btrfs_zoned_activate_one_bg() in ret. The helper can return 1 after successfully activating a block group, but ret is later used to decide whether to reserve metadata for chunk tree updates. As a result, successful activation skips btrfs_block_rsv_add() and leaves trans->chunk_bytes_reserved unchanged. Use a separate variable for the activation result so positive success does not affect the later reservation. Keep activation failures in ret instead of returning early so the function uses the common tail path. Fixes: b6a98021e401 ("btrfs: zoned: activate necessary block group") CC: stable@vger.kernel.org Reviewed-by: Johannes Thumshirn Signed-off-by: Guanghui Yang <3497809730@qq.com> Signed-off-by: David Sterba --- fs/btrfs/block-group.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c index ab76a5173272..8def7abb728f 100644 --- a/fs/btrfs/block-group.c +++ b/fs/btrfs/block-group.c @@ -4532,25 +4532,29 @@ static void reserve_chunk_space(struct btrfs_trans_handle *trans, if (IS_ERR(bg)) { ret = PTR_ERR(bg); } else { + int activate_ret; + /* * We have a new chunk. We also need to activate it for * zoned filesystem. */ - ret = btrfs_zoned_activate_one_bg(info, true); - if (ret < 0) - return; - - /* - * If we fail to add the chunk item here, we end up - * trying again at phase 2 of chunk allocation, at - * btrfs_create_pending_block_groups(). So ignore - * any error here. An ENOSPC here could happen, due to - * the cases described at do_chunk_alloc() - the system - * block group we just created was just turned into RO - * mode by a scrub for example, or a running discard - * temporarily removed its free space entries, etc. - */ - btrfs_chunk_alloc_add_chunk_item(trans, bg); + activate_ret = btrfs_zoned_activate_one_bg(info, true); + if (activate_ret < 0) { + ret = activate_ret; + } else { + /* + * If we fail to add the chunk item here, we end + * up trying again at phase 2 of chunk allocation, + * at btrfs_create_pending_block_groups(). So + * ignore any error here. An ENOSPC here could + * happen, due to the cases described at + * do_chunk_alloc() - the system block group we + * just created was just turned into RO mode by a + * scrub for example, or a running discard + * temporarily removed its free space entries, etc. + */ + btrfs_chunk_alloc_add_chunk_item(trans, bg); + } } } -- cgit v1.2.3 From 0d214d14be503f16238999723acfcbf63f04cc8b Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 14 Jul 2026 13:32:24 -0700 Subject: btrfs: initialize 'args' to avoid compiler warning in btrfs_ioctl_get_csums() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [COMPILER WARNING] With GCC 11.5.0 and KASAN enabled on ARM, the following warning is triggered during compiling: In file included from ./include/asm-generic/rwonce.h:26, from ./arch/arm64/include/asm/rwonce.h:81, from ./include/linux/compiler.h:369, from ./include/linux/array_size.h:5, from ./include/linux/kernel.h:16, from fs/btrfs/ioctl.c:6: In function ‘instrument_copy_from_user_before’, inlined from ‘_inline_copy_from_user’ at ./include/linux/uaccess.h:184:2, inlined from ‘copy_from_user’ at ./include/linux/uaccess.h:222:9, inlined from ‘btrfs_ioctl_get_csums.isra’ at fs/btrfs/ioctl.c:5220:6: ./include/linux/kasan-checks.h:38:27: warning: ‘args’ may be used uninitialized [-Wmaybe-uninitialized] 38 | #define kasan_check_write __kasan_check_write ./include/linux/instrumented.h:146:9: note: in expansion of macro ‘kasan_check_write’ 146 | kasan_check_write(to, n); | ^~~~~~~~~~~~~~~~~ fs/btrfs/ioctl.c: In function ‘btrfs_ioctl_get_csums.isra’: ./include/linux/kasan-checks.h:20:6: note: by argument 1 of type ‘const volatile void *’ to ‘__kasan_check_write’ declared here 20 | bool __kasan_check_write(const volatile void *p, unsigned int size); | ^~~~~~~~~~~~~~~~~~~ fs/btrfs/ioctl.c:5201:43: note: ‘args’ declared here 5201 | struct btrfs_ioctl_get_csums_args args; | ^~~~ [POSSIBLE FALSE ALERTS] This seems to be a false alert from certain GCC versions. The @args is immediately over-written by copy_from_user(), and there is no code touching that @args until copy_from_user() finished correctly. [WORKAROUND] Initialize 'args' to zero, which suppresses the warning. Reviewed-by: Qu Wenruo Signed-off-by: Paul E. McKenney Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 68b33f365fda..baa645e98812 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -5205,7 +5205,7 @@ static int btrfs_ioctl_get_csums(struct file *file, void __user *argp) struct btrfs_inode *inode = BTRFS_I(vfs_inode); struct btrfs_fs_info *fs_info = inode->root->fs_info; struct btrfs_root *root = inode->root; - struct btrfs_ioctl_get_csums_args args; + struct btrfs_ioctl_get_csums_args args = { 0 }; BTRFS_PATH_AUTO_FREE(path); const u64 ino = btrfs_ino(inode); const u32 csum_size = fs_info->csum_size; -- cgit v1.2.3 From ab602da96a915d42dcb1b0b322e8daea0f71b51f Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Thu, 16 Jul 2026 10:23:12 +0200 Subject: btrfs: zoned: skip fully truncated ordered extents at zone finish A fully truncated ordered extent (truncated_len == 0) wrote no data, so its ->csum_list is empty and btrfs_finish_ordered_zoned() trips: assertion failed: !list_empty(&ordered->csum_list), in fs/btrfs/zoned.c:2141 Since commit 66ff4d366e7e a short or cancelled direct IO write finishes the unsubmitted ordered extent as truncated with uptodate = true instead of setting BTRFS_ORDERED_IOERR, so it now reaches btrfs_finish_ordered_zoned() rather than being skipped by the IOERR check in btrfs_finish_ordered_io(). generic/208 hits this on a zoned filesystem. Return early for these, like the BTRFS_ORDERED_PREALLOC case; there is no zone append result to record and btrfs_finish_one_ordered() skips them too. Fixes: 66ff4d366e7e ("btrfs: fix false IO failure after falling back to buffered write") Reviewed-by: Qu Wenruo Signed-off-by: Johannes Thumshirn Signed-off-by: David Sterba --- fs/btrfs/zoned.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/btrfs/zoned.c b/fs/btrfs/zoned.c index 0706c0788cb2..a016cb471beb 100644 --- a/fs/btrfs/zoned.c +++ b/fs/btrfs/zoned.c @@ -2138,6 +2138,16 @@ void btrfs_finish_ordered_zoned(struct btrfs_ordered_extent *ordered) if (test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags)) return; + /* + * A fully truncated ordered extent wrote no data and so has + * no zone append result to record. + */ + if (test_bit(BTRFS_ORDERED_TRUNCATED, &ordered->flags) && + ordered->truncated_len == 0) { + ASSERT(list_empty(&ordered->csum_list)); + return; + } + ASSERT(!list_empty(&ordered->csum_list)); sum = list_first_entry(&ordered->csum_list, struct btrfs_ordered_sum, list); logical = sum->logical; -- cgit v1.2.3 From c4c0673e4cb15b0c127e6d00732a2427bdd12c11 Mon Sep 17 00:00:00 2001 From: Mykola Lysenko Date: Sat, 18 Jul 2026 16:37:10 -0700 Subject: btrfs: raid56: fix scrub read assembly submitting no reads Commit 5387bd958180 ("btrfs: raid56: remove sector_ptr structure") converted the bio-list membership checks from sector pointers to physical addresses. The two conversions in rmw_assemble_write_bios() kept their polarity (skip the sector when it is NOT in the bio list, i.e. when there is nothing to write), but scrub_assemble_read_bios() has the opposite polarity -- skip the sector when it IS in the bio list, because then there is nothing to read -- and the conversion flipped it: - sector = sector_in_rbio(rbio, stripe, sectornr, 1); - if (sector) + paddr = sector_paddr_in_rbio(rbio, stripe, sectornr, 1); + if (paddr == INVALID_PADDR) continue; Since a parity-scrub rbio's bio list only holds the empty completion bio, the result is that scrub_assemble_read_bios() submits no reads at all. finish_parity_scrub() then compares the parity it computes from the (cached, correct) data stripes against whatever happens to be in the freshly allocated, uninitialized stripe pages: - if the garbage differs from the computed parity, the sector is "repaired" and written back -- accidentally producing the correct on-disk result; - if a recycled page happens to still hold the old (correct) parity content, the sector is deemed clean, dropped from dbitmap, and the actually-corrupt on-disk parity is left in place. (Scrub reports no errors either way: there is no counter for P/Q corruption by design, so the bug here is purely the failure to read and repair.) The second case is intermittent because it depends on page-allocator recycling. Observed with fstests btrfs/297 (raid5, 2 devices): the corrupted P stripe intermittently stays corrupt after a scrub -- roughly 1/10 runs on x86-64 KVM and up to 7/8 on a UML build whose timing favors page reuse. Since the bio-list check can never be true for a parity-scrub rbio -- raid56_parity_alloc_scrub_rbio() adds a single empty completion bio (asserting bi_size == 0), bio_paddrs[] is only populated by index_rbio_pages() which is never called for BTRFS_RBIO_PARITY_SCRUB, and rbio_can_merge() refuses to merge rbios of different operations -- remove the dead check entirely and assert the invariant instead, as suggested by Qu Wenruo. After this fix the injected corruption is read, detected and repaired in every run (8/8 UML, 10/10 KVM), and the new assertion never fires across the full fstests raid group. Fixes: 5387bd958180 ("btrfs: raid56: remove sector_ptr structure") CC: stable@vger.kernel.org # 7.1+ Suggested-by: Qu Wenruo Assisted-by: Claude:claude-fable-5 Reviewed-by: Qu Wenruo Signed-off-by: Mykola Lysenko Signed-off-by: David Sterba --- fs/btrfs/raid56.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c index 3f2896e793e3..ca94c9e3d563 100644 --- a/fs/btrfs/raid56.c +++ b/fs/btrfs/raid56.c @@ -2911,13 +2911,12 @@ static int scrub_assemble_read_bios(struct btrfs_raid_bio *rbio) continue; /* - * We want to find all the sectors missing from the rbio and - * read them from the disk. If sector_paddr_in_rbio() finds a sector - * in the bio list we don't need to read it off the stripe. + * A parity-scrub rbio carries no data in its bio list: the + * only bio there is the empty completion bio added by + * raid56_parity_alloc_scrub_rbio(). Every sector is read + * from the stripe, so only assert that invariant here. */ - paddrs = sector_paddrs_in_rbio(rbio, stripe, sectornr, 1); - if (paddrs == NULL) - continue; + ASSERT(!sector_paddrs_in_rbio(rbio, stripe, sectornr, 1)); paddrs = rbio_stripe_paddrs(rbio, stripe, sectornr); /* -- cgit v1.2.3 From 8bed376124ab4505b70083a2b91f2c7ef6d51e24 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 10 Jul 2026 14:22:57 +0900 Subject: ntfs: harden runlist realloc size calculations Add a shared helper to safely convert runlist element counts to byte sizes using overflow checks, and use it in both ntfs_rl_realloc() and ntfs_rl_realloc_nofail(). Fixes: 11ccc9107dc4 ("ntfs: update runlist handling and cluster allocator") Co-developed-by: Alper Mudar Signed-off-by: Alper Mudar Tested-by: Alper Mudar Signed-off-by: Namjae Jeon --- fs/ntfs/runlist.c | 50 +++++++++++++++++++++++++++----------------------- 1 file changed, 27 insertions(+), 23 deletions(-) diff --git a/fs/ntfs/runlist.c b/fs/ntfs/runlist.c index cbb6576cf725..8e0fd400e7f7 100644 --- a/fs/ntfs/runlist.c +++ b/fs/ntfs/runlist.c @@ -71,29 +71,46 @@ static inline void ntfs_rl_mc(struct runlist_element *dstbase, int dst, * On success, return a pointer to the newly allocated, or recycled, memory. * On error, return -errno. */ -struct runlist_element *ntfs_rl_realloc(struct runlist_element *rl, - int old_size, int new_size) +static inline struct runlist_element *ntfs_rl_realloc_gfp(struct runlist_element *rl, + int old_size, int new_size, gfp_t gfp) { struct runlist_element *new_rl; + size_t new_bytes; + + if (old_size < 0 || new_size < 0) + return ERR_PTR(-EINVAL); - old_size = old_size * sizeof(*rl); - new_size = new_size * sizeof(*rl); if (old_size == new_size) return rl; - new_rl = kvzalloc(new_size, GFP_NOFS); + if (check_mul_overflow(new_size, sizeof(*rl), &new_bytes)) + return ERR_PTR(-EINVAL); + + new_rl = kvzalloc(new_bytes, gfp); if (unlikely(!new_rl)) return ERR_PTR(-ENOMEM); if (likely(rl != NULL)) { - if (unlikely(old_size > new_size)) - old_size = new_size; - memcpy(new_rl, rl, old_size); + size_t old_bytes; + + if (check_mul_overflow(old_size, sizeof(*rl), &old_bytes)) { + kvfree(new_rl); + return ERR_PTR(-EINVAL); + } + if (unlikely(old_bytes > new_bytes)) + old_bytes = new_bytes; + memcpy(new_rl, rl, old_bytes); kvfree(rl); } return new_rl; } +struct runlist_element *ntfs_rl_realloc(struct runlist_element *rl, + int old_size, int new_size) +{ + return ntfs_rl_realloc_gfp(rl, old_size, new_size, GFP_NOFS); +} + /* * ntfs_rl_realloc_nofail - Reallocate memory for runlists * @rl: original runlist @@ -118,21 +135,8 @@ struct runlist_element *ntfs_rl_realloc(struct runlist_element *rl, static inline struct runlist_element *ntfs_rl_realloc_nofail(struct runlist_element *rl, int old_size, int new_size) { - struct runlist_element *new_rl; - - old_size = old_size * sizeof(*rl); - new_size = new_size * sizeof(*rl); - if (old_size == new_size) - return rl; - - new_rl = kvmalloc(new_size, GFP_NOFS | __GFP_NOFAIL); - if (likely(rl != NULL)) { - if (unlikely(old_size > new_size)) - old_size = new_size; - memcpy(new_rl, rl, old_size); - kvfree(rl); - } - return new_rl; + return ntfs_rl_realloc_gfp(rl, old_size, new_size, + GFP_NOFS | __GFP_NOFAIL); } /* -- cgit v1.2.3 From 4e646ecd44759e552b0b9ccd995f3f608daab414 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 13 Jul 2026 16:49:57 +0900 Subject: ntfs: drop stale page-cache when shrinking a non-resident attr ntfs_non_resident_attr_shrink() shrinks attribute sizes but fails to trim the page cache. This leaves orphaned dirty folios beyond the new end of the attribute, leading to writeback failures (-ENOENT), data loss, and $EA chain corruption. Fix this by truncating the page cache to the new size immediately after updating the sizes, preventing writeback from flushing out-of-range folios. Fixes: 495e90fa3348 ("ntfs: update attrib operations") Signed-off-by: Namjae Jeon --- fs/ntfs/attrib.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c index 239b7bcbaedf..58f32aac5f61 100644 --- a/fs/ntfs/attrib.c +++ b/fs/ntfs/attrib.c @@ -4293,6 +4293,16 @@ static int ntfs_non_resident_attr_shrink(struct ntfs_inode *ni, const s64 newsiz ni->initialized_size = newsize; ctx->attr->data.non_resident.initialized_size = cpu_to_le64(newsize); } + + /* + * Drop any page-cache folios that now lie beyond the shrunk + * attribute. The clusters backing them have just been freed and the + * runlist truncated, so leaving stale dirty folios around makes a + * later writeback map a vcn past the new allocation, which fails with + * -ENOENT and loses the write. + */ + truncate_inode_pages(VFS_I(ni)->i_mapping, newsize); + /* Update data size in the index. */ if (ni->type == AT_DATA && ni->name == AT_UNNAMED) NInoSetFileNameDirty(ni); -- cgit v1.2.3 From 8a570b19b4b16a8a3b5ffa2b332bd5613110b2d8 Mon Sep 17 00:00:00 2001 From: D Scott Phillips Date: Tue, 14 Jul 2026 16:11:58 -0700 Subject: KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context In the nested state, the physical interrupt has already been deactivated through the HW bit in the LR. The extra deactivation would be harmless but can hit an errata case on AmpereOne, so avoid it here. On AmpereOne, deactivating a physical interrupt through ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not active, but is the highest priority pending interrupt causes the cpu to lose the interrupt pending state and also prevents the delivery of future interrupts. Fixes: 6dd333c8942b2 ("KVM: arm64: GICv3: nv: Plug L1 LR sync into deactivation primitive") Signed-off-by: D Scott Phillips Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-arm-kernel/20260710222128.416581-1-scott@os.amperecomputing.com/ Link: https://patch.msgid.link/20260714231158.496808-1-scott@os.amperecomputing.com Signed-off-by: Marc Zyngier --- Documentation/arch/arm64/silicon-errata.rst | 4 ++++ arch/arm64/kvm/vgic/vgic-v3.c | 8 +++++++- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index 014aa1c215a1..88b4aa45a206 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -55,10 +55,14 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Ampere | AmpereOne | AC03_CPU_38 | AMPERE_ERRATUM_AC03_CPU_38 | +----------------+-----------------+-----------------+-----------------------------+ +| Ampere | AmpereOne | AC03_CPU_57 | N/A | ++----------------+-----------------+-----------------+-----------------------------+ | Ampere | AmpereOne AC04 | AC04_CPU_10 | AMPERE_ERRATUM_AC03_CPU_38 | +----------------+-----------------+-----------------+-----------------------------+ | Ampere | AmpereOne AC04 | AC04_CPU_23 | AMPERE_ERRATUM_AC04_CPU_23 | +----------------+-----------------+-----------------+-----------------------------+ +| Ampere | AmpereOne AC04 | AC04_CPU_29 | N/A | ++----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2457168 | ARM64_ERRATUM_2457168 | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index 9e841e7afd4a..7aa417440f6a 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -275,7 +275,13 @@ void vgic_v3_deactivate(struct kvm_vcpu *vcpu, u64 val) lr = vgic_v3_compute_lr(vcpu, irq) & ~ICH_LR_ACTIVE_BIT; } - if (lr & ICH_LR_HW) + /* + * In the nested state, the irq has already been deactivated via the HW + * bit in the LR. Deactivating again would be harmless except AmpereOne + * errata AC03_CPU_57, AC04_CPU_29 could cause irq delivery to break if + * the deactivation hits the highest priority pending irq. + */ + if ((lr & ICH_LR_HW) && !vgic_state_is_nested(vcpu)) vgic_v3_deactivate_phys(FIELD_GET(ICH_LR_PHYS_ID_MASK, lr)); vgic_v3_fold_lr(vcpu, lr); -- cgit v1.2.3 From 5aab4d46278df6e9e94bd0a92df9a135a5fe16ad Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Sun, 19 Jul 2026 17:32:57 +0100 Subject: KVM: arm64: Update Fuad Tabba's email address Switch my KVM/arm64 reviewer entry to fuad.tabba@linux.dev, my canonical address for kernel work, and add a .mailmap entry so the existing tabba@google.com commits map onto it. Signed-off-by: Fuad Tabba Link: https://patch.msgid.link/20260719163257.3156529-1-fuad.tabba@linux.dev Signed-off-by: Marc Zyngier --- .mailmap | 1 + MAINTAINERS | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/.mailmap b/.mailmap index 735470e21075..91003fb86136 100644 --- a/.mailmap +++ b/.mailmap @@ -291,6 +291,7 @@ Frank Rowand Frank Rowand Frank Rowand Frank Zago +Fuad Tabba Gao Xiang Gao Xiang Gao Xiang diff --git a/MAINTAINERS b/MAINTAINERS index a674e36529f7..5ab6fc150426 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14192,7 +14192,7 @@ F: virt/kvm/* KERNEL VIRTUAL MACHINE FOR ARM64 (KVM/arm64) M: Marc Zyngier M: Oliver Upton -R: Fuad Tabba +R: Fuad Tabba R: Joey Gouly R: Steffen Eiden R: Suzuki K Poulose -- cgit v1.2.3 From fafb66e5903c2bcfc7b7e259042a8282f18a6faa Mon Sep 17 00:00:00 2001 From: Tomas Glozar Date: Mon, 13 Jul 2026 16:10:47 +0200 Subject: rtla/timerlat_top: Fix on-threshold actions firing on signal A bug was reported when rtla-timerlat-top tool performs on-threshold actions, even though no threshold was hit. This is reproduced even if no threshold is set at all: $ rtla timerlat top -q -c 0 --on-threshold shell,command='echo BAD' BAD Timer Latency ... The bug is due to incorrect logic in timerlat_top_bpf_main_loop(). The loop uses timerlat_bpf_wait(), the return values of which are: - > 0 (number of ringbuffer entries): at least 1 CPU hit threshold - = 0: time out - < 0: wait was interrupted by a signal Commit 3138df6f0cd0 ("rtla/timerlat: Exit top main loop on any non-zero wait_retval") changed the condition for "threshold hit" from "wait_reval == 1" (exactly 1 CPU hit threshold) to "wait_retval != 0", to fix a race where multiple CPUs hit the threshold at the same time. That also made it incorrectly include a signal (< 0), coming from either duration expired (SIGALRM) or user interrupt (SIGINT). Check for wait_retval greater than zero in the if condition to cover all return values correctly. Fixes: 3138df6f0cd0 ("rtla/timerlat: Exit top main loop on any non-zero wait_retval") Reported-by: Attila Fazekas Reviewed-by: Wander Lairson Costa Link: https://lore.kernel.org/r/20260713141047.687877-1-tglozar@redhat.com Signed-off-by: Tomas Glozar --- tools/tracing/rtla/src/timerlat_top.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/tracing/rtla/src/timerlat_top.c b/tools/tracing/rtla/src/timerlat_top.c index 18e1071a2e24..6206a0a565ad 100644 --- a/tools/tracing/rtla/src/timerlat_top.c +++ b/tools/tracing/rtla/src/timerlat_top.c @@ -536,7 +536,7 @@ timerlat_top_bpf_main_loop(struct osnoise_tool *tool) if (!params->quiet) timerlat_print_stats(tool); - if (wait_retval != 0) { + if (wait_retval > 0) { /* Stopping requested by tracer */ retval = common_threshold_handler(tool); if (retval) -- cgit v1.2.3 From f7074624bafc44b236ddc7159d962075c3747f2b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E9=83=91=E9=B8=BF=E6=BA=90?= Date: Tue, 21 Jul 2026 03:31:58 +0800 Subject: ASoC: amd: yc: Add MSI Crosshair A16 HX D7WFKG to quirk table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MSI Crosshair A16 HX D7WFKG has an internal digital microphone connected through AMD ACP6x, but the system does not expose the AcpDmicConnected ACPI property. As a result, acp_yc_mach does not bind and no DMIC capture device is created. Add a DMI quirk for this model. This was tested on a system with board MS-15PL, BIOS E15PLAMS.10B, and AMD ACP6x rev 0x62. After applying the quirk, the internal microphone appears as an acp6x DMIC capture device and records correctly. Signed-off-by: 郑鸿源 Reviewed-by: Vijendar Mukunda Link: https://patch.msgid.link/20260721-master-v1-1-6f56d5a54d96@outlook.com Signed-off-by: Mark Brown --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 2f54d4e30539..0d93e45b6178 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -521,6 +521,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vector A16 HX A8WHG"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Micro-Star International Co., Ltd."), + DMI_MATCH(DMI_PRODUCT_NAME, "Crosshair A16 HX D7WFKG"), + } + }, { .driver_data = &acp6x_card, .matches = { -- cgit v1.2.3 From 97ab5aa5177cfa8759bd3861d71e047ea084a829 Mon Sep 17 00:00:00 2001 From: Hongbo Li Date: Tue, 21 Jul 2026 15:05:18 +0800 Subject: MAINTAINERS: update Hongbo Li's email address Since the original email account is no longer in use, I have updated it to my current email address. Signed-off-by: Hongbo Li Acked-by: Chao Yu Acked-by: Gao Xiang Signed-off-by: Gao Xiang --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a674e36529f7..4ac000af898f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9617,7 +9617,7 @@ M: Chao Yu R: Yue Hu R: Jeffle Xu R: Sandeep Dhavale -R: Hongbo Li +R: Hongbo Li R: Chunhai Guo L: linux-erofs@lists.ozlabs.org S: Maintained -- cgit v1.2.3 From e4779e2a16d600892aaf743438f6ce8cc4eb3c4c Mon Sep 17 00:00:00 2001 From: Radhey Shyam Pandey Date: Mon, 20 Jul 2026 21:08:30 +0530 Subject: phy: zynqmp: fix clock error handling in xpsgtr_phy_init() Propagate clk_prepare_enable() failures to the caller instead of returning success, and disable the reference clock on initialization error paths to avoid leaking clock references when phy_exit() is not called. Fixes: 25d700833513 ("phy: xilinx: phy-zynqmp: dynamic clock support for power-save") Signed-off-by: Radhey Shyam Pandey Reviewed-by: Michal Simek Link: https://patch.msgid.link/20260720153832.1130006-2-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul --- drivers/phy/xilinx/phy-zynqmp.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c index fe6b4925d166..c8230f2bda62 100644 --- a/drivers/phy/xilinx/phy-zynqmp.c +++ b/drivers/phy/xilinx/phy-zynqmp.c @@ -658,12 +658,13 @@ static int xpsgtr_phy_init(struct phy *phy) { struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy); struct xpsgtr_dev *gtr_dev = gtr_phy->dev; - int ret = 0; + int ret; mutex_lock(>r_dev->gtr_mutex); /* Configure and enable the clock when peripheral phy_init call */ - if (clk_prepare_enable(gtr_dev->clk[gtr_phy->refclk])) + ret = clk_prepare_enable(gtr_dev->clk[gtr_phy->refclk]); + if (ret) goto out; /* Skip initialization if not required. */ @@ -673,7 +674,7 @@ static int xpsgtr_phy_init(struct phy *phy) if (gtr_dev->tx_term_fix) { ret = xpsgtr_phy_tx_term_fix(gtr_phy); if (ret < 0) - goto out; + goto out_disable_clk; gtr_dev->tx_term_fix = false; } @@ -687,7 +688,7 @@ static int xpsgtr_phy_init(struct phy *phy) */ ret = xpsgtr_configure_pll(gtr_phy); if (ret) - goto out; + goto out_disable_clk; xpsgtr_lane_set_protocol(gtr_phy); @@ -705,6 +706,10 @@ static int xpsgtr_phy_init(struct phy *phy) break; } + goto out; + +out_disable_clk: + clk_disable_unprepare(gtr_dev->clk[gtr_phy->refclk]); out: mutex_unlock(>r_dev->gtr_mutex); return ret; -- cgit v1.2.3 From f3506e15cf72e94f62d5f2d173e5b7008f644cde Mon Sep 17 00:00:00 2001 From: Radhey Shyam Pandey Date: Mon, 20 Jul 2026 21:08:31 +0530 Subject: phy: zynqmp: fix runtime PM leak on probe allocation failure Allocate saved_regs before pm_runtime_resume_and_get() so a devm_kmalloc() failure does not leave an unreleased runtime PM usage counter. Fixes: 5af9b304bc60 ("phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume") Signed-off-by: Radhey Shyam Pandey Reviewed-by: Michal Simek Link: https://patch.msgid.link/20260720153832.1130006-3-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul --- drivers/phy/xilinx/phy-zynqmp.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c index c8230f2bda62..2138f5399821 100644 --- a/drivers/phy/xilinx/phy-zynqmp.c +++ b/drivers/phy/xilinx/phy-zynqmp.c @@ -1044,6 +1044,12 @@ static int xpsgtr_probe(struct platform_device *pdev) return PTR_ERR(provider); } + gtr_dev->saved_regs = devm_kmalloc(gtr_dev->dev, + sizeof(save_reg_address), + GFP_KERNEL); + if (!gtr_dev->saved_regs) + return -ENOMEM; + pm_runtime_set_active(gtr_dev->dev); pm_runtime_enable(gtr_dev->dev); @@ -1053,12 +1059,6 @@ static int xpsgtr_probe(struct platform_device *pdev) return ret; } - gtr_dev->saved_regs = devm_kmalloc(gtr_dev->dev, - sizeof(save_reg_address), - GFP_KERNEL); - if (!gtr_dev->saved_regs) - return -ENOMEM; - return 0; } -- cgit v1.2.3 From b5e24d6377f9062aff79c3c493bcbe923deb380c Mon Sep 17 00:00:00 2001 From: Lianqin Hu Date: Wed, 22 Jul 2026 04:07:07 +0000 Subject: ALSA: usb-audio: Add iface reset and delay quirk for Generic USB Headphone Setting up the interface when suspended/resuming fails on this card. Adding a reset and delay quirk will eliminate this problem. usb 1-1: New USB device found, idVendor=0124, idProduct=0c21 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: USB Headphone usb 1-1: Manufacturer: Generic usb 1-1: SerialNumber: 20210726905926 Signed-off-by: Lianqin Hu Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/TYUPR06MB6217CBB68C8F868C076A4353D2C12@TYUPR06MB6217.apcprd06.prod.outlook.com --- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 0de7c9d94259..49b56287cdb9 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2208,6 +2208,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_FORCE_IFACE_RESET | QUIRK_FLAG_IFACE_DELAY), DEVICE_FLG(0x0020, 0x0b21, /* GHW-123P */ QUIRK_FLAG_FORCE_IFACE_RESET | QUIRK_FLAG_IFACE_DELAY), + DEVICE_FLG(0x0124, 0x0c21, /* Generic USB Headphone */ + QUIRK_FLAG_FORCE_IFACE_RESET | QUIRK_FLAG_IFACE_DELAY), DEVICE_FLG(0x03f0, 0x654a, /* HP 320 FHD Webcam */ QUIRK_FLAG_GET_SAMPLE_RATE | QUIRK_FLAG_MIC_RES_16), DEVICE_FLG(0x040b, 0x0897, /* Weltrend Semiconductor, sold as Redragon H510-PRO Wireless headset */ -- cgit v1.2.3 From 704de5697008ea5caa04bb6a7266624699801ddc Mon Sep 17 00:00:00 2001 From: Zhang Heng Date: Tue, 21 Jul 2026 19:35:38 +0800 Subject: ALSA: hda/realtek: Add quirk for HP Pavilion All-in-One 27-ca1xxx This HP All-in-One desktop (model 27-ca1xxx) uses an ALC274 codec and has no sound from either the internal speakers or the headphone jack. The audio output requires a combination of a specific verb setup and GPIO configuration to become functional. Additionally, the power_save feature must be disabled; otherwise, audible clicks or pops occur during power state transitions. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220694 Signed-off-by: Zhang Heng Link: https://patch.msgid.link/20260721113539.317561-1-zhangheng@kylinos.cn Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 35 +++++++++++++++++++++++++++++++++++ sound/hda/controllers/intel.c | 2 ++ 2 files changed, 37 insertions(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index 379e1458f4ac..fcc60e64137d 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -3863,6 +3863,16 @@ static void alc288_fixup_surface_swap_dacs(struct hda_codec *codec, spec->gen.preferred_dacs = preferred_pairs; } +static void alc274_fixup_hp_89e9_amp(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + if (action == HDA_FIXUP_ACT_INIT) { + /* need to toggle GPIO to enable the amp */ + snd_hda_codec_set_gpio(codec, 0x03, 0x03, 0x03, 0); + msleep(100); + snd_hda_codec_set_gpio(codec, 0x03, 0x03, 0x00, 0); + } +} enum { ALC269_FIXUP_GPIO2, ALC269_FIXUP_SONY_VAIO, @@ -4213,6 +4223,8 @@ enum { ALC245_FIXUP_HP_ENVY_X360_15_FH0XXX, ALC287_FIXUP_ACER_MICMUTE_LED, ALC236_FIXUP_DELL_HP_POP_NOISE, + ALC274_FIXUP_HP_89E9_GPIO, + ALC274_FIXUP_HP_VERBS, }; /* A special fixup for Lenovo C940 and Yoga Duet 7; @@ -6855,6 +6867,28 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc285_fixup_invalidate_dacs, }, + [ALC274_FIXUP_HP_89E9_GPIO] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc274_fixup_hp_89e9_amp, + }, + [ALC274_FIXUP_HP_VERBS] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x20, AC_VERB_SET_COEF_INDEX, 0x0b }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x7778 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x10 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xc580 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x5757 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x62 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xa007 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x6b }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0060 }, + { } + }, + .chained = true, + .chain_id = ALC274_FIXUP_HP_89E9_GPIO, + }, }; static const struct hda_quirk alc269_fixup_tbl[] = { @@ -7231,6 +7265,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8a3d, "HP Victus 15-fb0xxx (MB 8A3D)", ALC245_FIXUP_HP_MUTE_LED_V2_COEFBIT), SND_PCI_QUIRK(0x103c, 0x8a4f, "HP Victus 15-fa0xxx (MB 8A4F)", ALC245_FIXUP_HP_MUTE_LED_COEFBIT), SND_PCI_QUIRK(0x103c, 0x8a50, "HP Victus 15-fa0xxx (MB 8A50)", ALC245_FIXUP_HP_MUTE_LED_COEFBIT), + SND_PCI_QUIRK(0x103c, 0x8a6b, "HP Pavilion All-in-One Desktop 27-ca1xxx", ALC274_FIXUP_HP_VERBS), SND_PCI_QUIRK(0x103c, 0x8a6e, "HP EDNA 360", ALC287_FIXUP_CS35L41_I2C_4), SND_PCI_QUIRK(0x103c, 0x8a74, "HP ProBook 440 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8a75, "HP ProBook 450 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED), diff --git a/sound/hda/controllers/intel.c b/sound/hda/controllers/intel.c index 4b03c64e72ab..28c55c5a2d2e 100644 --- a/sound/hda/controllers/intel.c +++ b/sound/hda/controllers/intel.c @@ -2306,6 +2306,8 @@ static const struct snd_pci_quirk power_save_denylist[] = { SND_PCI_QUIRK(0x1028, 0x0962, "Dell ALC3271", 0), /* https://bugzilla.kernel.org/show_bug.cgi?id=220210 */ SND_PCI_QUIRK(0x17aa, 0x5079, "Lenovo Thinkpad E15", 0), + /* https://bugzilla.kernel.org/show_bug.cgi?id=220694 */ + SND_PCI_QUIRK(0x103c, 0x8a6b, "HP 89E9", 0), {} }; -- cgit v1.2.3 From 11055a46f398779b69aa36afb7c9f4124529a075 Mon Sep 17 00:00:00 2001 From: Christian Loehle Date: Wed, 22 Jul 2026 10:38:24 +0100 Subject: ACPI: CPPC: Check all controls for fast switching ACPI 6.2, Section 6.2.11.2 permits _CPC registers to use flexible address spaces. Linux advertises that capability through _OSC and parses the address space of each _CPC register independently. A directly accessible DESIRED_PERF combined with PCC-backed limits is therefore a valid configuration. cppc_allow_fast_switch() only checks DESIRED_PERF, although the fast-switch callback passes DESIRED_PERF, MIN_PERF and MAX_PERF to cppc_set_perf(). If a limit uses PCC, that function can sleep while called from scheduler context. Allow fast switching only when every supported control used by the callback has an address space already accepted for fast access. Check the complete policy domain, including initialized CPUs that are currently offline and may later become the policy's managing CPU. Fixes: 658fa7b1c47a ("ACPI: CPPC: Add cppc_get_perf() API to read performance controls") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle Link: https://patch.msgid.link/20260722093825.1030594-2-christian.loehle@arm.com Signed-off-by: Rafael J. Wysocki --- drivers/acpi/cppc_acpi.c | 22 +++++++++++++++++----- drivers/cpufreq/cppc_cpufreq.c | 2 +- include/acpi/cppc_acpi.h | 5 +++-- 3 files changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index 9f572f481241..1d3a94100491 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -475,17 +475,29 @@ bool acpi_cpc_valid(void) } EXPORT_SYMBOL_GPL(acpi_cpc_valid); -bool cppc_allow_fast_switch(void) +bool cppc_allow_fast_switch(const struct cpumask *cpus) { - struct cpc_register_resource *desired_reg; + struct cpc_register_resource *desired_reg, *min_reg, *max_reg; struct cpc_desc *cpc_ptr; int cpu; - for_each_online_cpu(cpu) { + for_each_cpu(cpu, cpus) { cpc_ptr = per_cpu(cpc_desc_ptr, cpu); + if (!cpc_ptr) + return false; desired_reg = &cpc_ptr->cpc_regs[DESIRED_PERF]; - if (!CPC_IN_SYSTEM_MEMORY(desired_reg) && - !CPC_IN_SYSTEM_IO(desired_reg)) + min_reg = &cpc_ptr->cpc_regs[MIN_PERF]; + max_reg = &cpc_ptr->cpc_regs[MAX_PERF]; + + if (!CPC_SUPPORTED(desired_reg) || + (!CPC_IN_SYSTEM_MEMORY(desired_reg) && + !CPC_IN_SYSTEM_IO(desired_reg)) || + (CPC_SUPPORTED(min_reg) && + !CPC_IN_SYSTEM_MEMORY(min_reg) && + !CPC_IN_SYSTEM_IO(min_reg)) || + (CPC_SUPPORTED(max_reg) && + !CPC_IN_SYSTEM_MEMORY(max_reg) && + !CPC_IN_SYSTEM_IO(max_reg))) return false; } diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index f6cea0c54dd9..b943bf78d3f5 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -693,7 +693,7 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy) goto out; } - policy->fast_switch_possible = cppc_allow_fast_switch(); + policy->fast_switch_possible = cppc_allow_fast_switch(policy->cpus); policy->dvfs_possible_from_any_cpu = true; /* diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h index 8693890a7275..8c191b9ac18f 100644 --- a/include/acpi/cppc_acpi.h +++ b/include/acpi/cppc_acpi.h @@ -170,7 +170,7 @@ extern u64 cppc_get_dmi_max_khz(void); extern unsigned int cppc_perf_to_khz(struct cppc_perf_caps *caps, unsigned int perf); extern unsigned int cppc_khz_to_perf(struct cppc_perf_caps *caps, unsigned int freq); extern bool acpi_cpc_valid(void); -extern bool cppc_allow_fast_switch(void); +bool cppc_allow_fast_switch(const struct cpumask *cpus); extern int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data); extern int cppc_get_transition_latency(int cpu); extern bool cpc_ffh_supported(void); @@ -234,7 +234,8 @@ static inline bool acpi_cpc_valid(void) { return false; } -static inline bool cppc_allow_fast_switch(void) + +static inline bool cppc_allow_fast_switch(const struct cpumask *cpus) { return false; } -- cgit v1.2.3 From 9753c0ab89b7516aba4884dc3cc725ca33c2e3da Mon Sep 17 00:00:00 2001 From: Christian Loehle Date: Wed, 22 Jul 2026 10:38:25 +0100 Subject: cpufreq: cppc: Sanitize lockless policy limit snapshots cppc_cpufreq_update_perf_limits() reads policy->min and policy->max without holding the policy lock. The cpufreq core updates those fields with separate stores, so a reader can observe the old minimum together with the new maximum and construct MIN_PERF greater than MAX_PERF. Read both fields once and, if the lockless snapshot is inconsistent, reduce the minimum to the observed maximum. This matches the conservative correction used by cpufreq_driver_resolve_freq() and ensures that CPPC never receives an inverted limit pair. Fixes: ea3db45ae476 ("cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle Link: https://patch.msgid.link/20260722093825.1030594-3-christian.loehle@arm.com Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cppc_cpufreq.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index b943bf78d3f5..6fe0e972952a 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -290,19 +290,32 @@ static inline void cppc_freq_invariance_exit(void) } #endif /* CONFIG_ACPI_CPPC_CPUFREQ_FIE */ -static void cppc_cpufreq_update_perf_limits(struct cppc_cpudata *cpu_data, - struct cpufreq_policy *policy) +static void cppc_cpufreq_get_perf_limits(struct cppc_cpudata *cpu_data, + struct cpufreq_policy *policy, + u32 *min_perf, u32 *max_perf) { struct cppc_perf_caps *caps = &cpu_data->perf_caps; - u32 min_perf, max_perf; + unsigned int min_freq, max_freq; + u32 min, max; + + min_freq = READ_ONCE(policy->min); + max_freq = READ_ONCE(policy->max); + if (unlikely(min_freq > max_freq)) + min_freq = max_freq; + + min = cppc_khz_to_perf(caps, min_freq); + max = cppc_khz_to_perf(caps, max_freq); - min_perf = cppc_khz_to_perf(caps, policy->min); - max_perf = cppc_khz_to_perf(caps, policy->max); + *min_perf = clamp_t(u32, min, caps->lowest_perf, caps->highest_perf); + *max_perf = clamp_t(u32, max, caps->lowest_perf, caps->highest_perf); +} - cpu_data->perf_ctrls.min_perf = - clamp_t(u32, min_perf, caps->lowest_perf, caps->highest_perf); - cpu_data->perf_ctrls.max_perf = - clamp_t(u32, max_perf, caps->lowest_perf, caps->highest_perf); +static void cppc_cpufreq_update_perf_limits(struct cppc_cpudata *cpu_data, + struct cpufreq_policy *policy) +{ + cppc_cpufreq_get_perf_limits(cpu_data, policy, + &cpu_data->perf_ctrls.min_perf, + &cpu_data->perf_ctrls.max_perf); } static int cppc_cpufreq_set_target(struct cpufreq_policy *policy, -- cgit v1.2.3 From f0a3f042293a8c5a2152346b3637ea60866c503a Mon Sep 17 00:00:00 2001 From: Zhongqiu Han Date: Thu, 16 Jul 2026 19:51:58 +0800 Subject: cpufreq: schedutil: Publish util hooks only after all sg_cpu are initialized Commit 16a03c71bba0 ("cpufreq: schedutil: Merge initialization code of sg_cpu in single loop") merged the per-CPU initialization and the utilization-hook registration into a single loop in sugov_start(). For a shared cpufreq policy this re-introduces the race originally fixed by commit ab2f7cf141aa ("cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race"). The scheduler's util path reaches the hook under RCU-sched and never takes policy->rwsem, so the rwsem held across sugov_start() cannot serialize the two. Once the first CPU's hook is published, sugov_update_shared() may run and, via sugov_next_freq_shared(), read/write each sibling sugov_cpu (iowait_boost, util, bw_min, ...) concurrently with the memset() still initializing them, with no lock common to both sides: the update side holds sg_policy->update_lock while the init side holds only policy->rwsem, which the scheduler's util path never takes. The walk only accesses scalar members, never a pointer like ->sg_policy, so it does not crash today; it merely uses stale (or zero on first start) values that skew the frequency selection and tracepoints. It is still a genuine data race, and a latent crash once any pointer member is dereferenced there. Restore the two-phase approach: initialize all per-CPU structures first, and only then publish the per-CPU utilization update hooks. Fixes: 16a03c71bba0 ("cpufreq: schedutil: Merge initialization code of sg_cpu in single loop") Cc: stable@vger.kernel.org Signed-off-by: Zhongqiu Han Reviewed-by: Christian Loehle Link: https://patch.msgid.link/20260716115159.848403-1-zhongqiu.han@oss.qualcomm.com Signed-off-by: Rafael J. Wysocki --- kernel/sched/cpufreq_schedutil.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c index a4e689eefdfb..dff4ee04694c 100644 --- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -870,8 +870,19 @@ static int sugov_start(struct cpufreq_policy *policy) memset(sg_cpu, 0, sizeof(*sg_cpu)); sg_cpu->cpu = cpu; sg_cpu->sg_policy = sg_policy; + } + + /* + * Publish the hooks only after all per-CPU data is initialized, so a + * shared policy's sugov_update_shared() never reads an uninitialized + * sibling sugov_cpu. + */ + for_each_cpu(cpu, policy->cpus) { + struct sugov_cpu *sg_cpu = &per_cpu(sugov_cpu, cpu); + cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util, uu); } + return 0; } -- cgit v1.2.3 From 6cb22477929489a412df8d153e550e77a012e701 Mon Sep 17 00:00:00 2001 From: Nava kishore Manne Date: Sat, 27 Jun 2026 21:22:27 +0530 Subject: phy: zynqmp: fix L0_TM_DISABLE_SCRAMBLE_ENCODER mask The L0_TX_DIG_61 register bit 2 is a reserved read-only field. The previous mask value 0x0f incorrectly included bit 2, causing unintended writes to a reserved bit on every scrambler bypass operation. Correct the mask to (BIT(3) | GENMASK(1, 0)) to cover only the valid scramble bypass control bits. Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Cc: stable@vger.kernel.org Signed-off-by: Nava kishore Manne Signed-off-by: Radhey Shyam Pandey Acked-by: Michal Simek Link: https://patch.msgid.link/20260627155229.2791113-2-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul --- drivers/phy/xilinx/phy-zynqmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c index 2138f5399821..58fa2f837689 100644 --- a/drivers/phy/xilinx/phy-zynqmp.c +++ b/drivers/phy/xilinx/phy-zynqmp.c @@ -53,7 +53,7 @@ #define L0_TM_DIG_6 0x106c #define L0_TM_DIS_DESCRAMBLE_DECODER 0x0f #define L0_TX_DIG_61 0x00f4 -#define L0_TM_DISABLE_SCRAMBLE_ENCODER 0x0f +#define L0_TM_DISABLE_SCRAMBLE_ENCODER (BIT(3) | GENMASK(1, 0)) /* PLL Test Mode register parameters */ #define L0_TM_PLL_DIG_37 0x2094 -- cgit v1.2.3 From 21e0749f931702765b9d52d05740092bc87fcd8d Mon Sep 17 00:00:00 2001 From: Nava kishore Manne Date: Sat, 27 Jun 2026 21:22:28 +0530 Subject: phy: zynqmp: use read-modify-write for SERDES scrambler bypass xpsgtr_bypass_scrambler_8b10b() used xpsgtr_write_phy() which performs a full register write, silently clearing any bits beyond the intended bypass control fields. Switch to xpsgtr_clr_set_phy() with clr=mask, set=mask to set only the bypass bits while preserving the remaining bits in each register. Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Cc: stable@vger.kernel.org Signed-off-by: Nava kishore Manne Signed-off-by: Radhey Shyam Pandey Acked-by: Michal Simek Link: https://patch.msgid.link/20260627155229.2791113-3-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul --- drivers/phy/xilinx/phy-zynqmp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c index 58fa2f837689..0e99b2cc2a2d 100644 --- a/drivers/phy/xilinx/phy-zynqmp.c +++ b/drivers/phy/xilinx/phy-zynqmp.c @@ -505,8 +505,12 @@ static void xpsgtr_lane_set_protocol(struct xpsgtr_phy *gtr_phy) /* Bypass (de)scrambler and 8b/10b decoder and encoder. */ static void xpsgtr_bypass_scrambler_8b10b(struct xpsgtr_phy *gtr_phy) { - xpsgtr_write_phy(gtr_phy, L0_TM_DIG_6, L0_TM_DIS_DESCRAMBLE_DECODER); - xpsgtr_write_phy(gtr_phy, L0_TX_DIG_61, L0_TM_DISABLE_SCRAMBLE_ENCODER); + xpsgtr_clr_set_phy(gtr_phy, L0_TM_DIG_6, + L0_TM_DIS_DESCRAMBLE_DECODER, + L0_TM_DIS_DESCRAMBLE_DECODER); + xpsgtr_clr_set_phy(gtr_phy, L0_TX_DIG_61, + L0_TM_DISABLE_SCRAMBLE_ENCODER, + L0_TM_DISABLE_SCRAMBLE_ENCODER); } /* DP-specific initialization. */ -- cgit v1.2.3 From 7eb61caf45607e1e1270f51f8f93f0ded53146da Mon Sep 17 00:00:00 2001 From: Nava kishore Manne Date: Sat, 27 Jun 2026 21:22:29 +0530 Subject: phy: zynqmp: keep SERDES scrambler and 8b/10b enabled for USB USB Gen1 requires scrambling and 8b/10b encoding to be performed in the physical layer. Do not bypass PHY-side scrambler or encoder/decoder for USB operation, as mandated by the USB 3.x specification. Scrambler and 8b/10b bypass remain restricted to SATA and SGMII modes, where encoding is handled in the controller. Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Cc: stable@vger.kernel.org Signed-off-by: Nava kishore Manne Signed-off-by: Radhey Shyam Pandey Acked-by: Michal Simek Link: https://patch.msgid.link/20260627155229.2791113-4-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul --- drivers/phy/xilinx/phy-zynqmp.c | 39 +++++++++++++++++++++++++++++---------- 1 file changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c index 0e99b2cc2a2d..240626b55475 100644 --- a/drivers/phy/xilinx/phy-zynqmp.c +++ b/drivers/phy/xilinx/phy-zynqmp.c @@ -502,15 +502,30 @@ static void xpsgtr_lane_set_protocol(struct xpsgtr_phy *gtr_phy) } } -/* Bypass (de)scrambler and 8b/10b decoder and encoder. */ -static void xpsgtr_bypass_scrambler_8b10b(struct xpsgtr_phy *gtr_phy) +/** + * xpsgtr_bypass_scrambler_8b10b - Configure scrambler/encoder behavior + * @gtr_phy: pointer to lane context + * @bypass: true to enable scrambler/encoder bypass (SATA/SGMII), + * false to disable scrambler/encoder bypass (USB3) + * + * Uses RMW to preserve reserved and unrelated register fields. + */ +static void xpsgtr_bypass_scrambler_8b10b(struct xpsgtr_phy *gtr_phy, + bool bypass) { - xpsgtr_clr_set_phy(gtr_phy, L0_TM_DIG_6, - L0_TM_DIS_DESCRAMBLE_DECODER, - L0_TM_DIS_DESCRAMBLE_DECODER); - xpsgtr_clr_set_phy(gtr_phy, L0_TX_DIG_61, - L0_TM_DISABLE_SCRAMBLE_ENCODER, - L0_TM_DISABLE_SCRAMBLE_ENCODER); + if (bypass) { + xpsgtr_clr_set_phy(gtr_phy, L0_TM_DIG_6, + L0_TM_DIS_DESCRAMBLE_DECODER, + L0_TM_DIS_DESCRAMBLE_DECODER); + xpsgtr_clr_set_phy(gtr_phy, L0_TX_DIG_61, + L0_TM_DISABLE_SCRAMBLE_ENCODER, + L0_TM_DISABLE_SCRAMBLE_ENCODER); + } else { + xpsgtr_clr_set_phy(gtr_phy, L0_TM_DIG_6, + L0_TM_DIS_DESCRAMBLE_DECODER, 0); + xpsgtr_clr_set_phy(gtr_phy, L0_TX_DIG_61, + L0_TM_DISABLE_SCRAMBLE_ENCODER, 0); + } } /* DP-specific initialization. */ @@ -531,7 +546,7 @@ static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy) { struct xpsgtr_dev *gtr_dev = gtr_phy->dev; - xpsgtr_bypass_scrambler_8b10b(gtr_phy); + xpsgtr_bypass_scrambler_8b10b(gtr_phy, true); writel(gtr_phy->lane, gtr_dev->siou + SATA_CONTROL_OFFSET); } @@ -547,7 +562,7 @@ static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy) xpsgtr_clr_set(gtr_dev, TX_PROT_BUS_WIDTH, mask, val); xpsgtr_clr_set(gtr_dev, RX_PROT_BUS_WIDTH, mask, val); - xpsgtr_bypass_scrambler_8b10b(gtr_phy); + xpsgtr_bypass_scrambler_8b10b(gtr_phy, true); } /* Configure TX de-emphasis and margining for DP. */ @@ -708,6 +723,10 @@ static int xpsgtr_phy_init(struct phy *phy) case ICM_PROTOCOL_SGMII: xpsgtr_phy_init_sgmii(gtr_phy); break; + + case ICM_PROTOCOL_USB: + xpsgtr_bypass_scrambler_8b10b(gtr_phy, false); + break; } goto out; -- cgit v1.2.3 From db3d0e0e5d4bc5ab4fe445b9f413d1b486508ca5 Mon Sep 17 00:00:00 2001 From: Xiang Mei Date: Sun, 12 Jul 2026 16:42:01 -0700 Subject: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() sip_help_tcp() stores the size change of each NAT-rewritten SIP message in s16 diff and accumulates it in s16 tdiff, but a single message can grow by more than S16_MAX while the packet stays under the 65535 enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long Contact list expands the message by tens of kilobytes. diff then wraps, and "datalen = datalen + diff - msglen" yields a huge unsigned datalen, so the next iteration's ct_sip_get_header() reads past the linearized skb tail. Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the 65535 byte packet limit, and the seqadj core is already s32 (nf_ct_seqadj_set() takes s32), so no previously accepted input is rejected. BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25 ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694) nf_confirm (net/netfilter/nf_conntrack_proto.c:183) nf_hook_slow (net/netfilter/core.c:619) ip6_output (net/ipv6/ip6_output.c:246) ip6_forward (net/ipv6/ip6_output.c:690) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6212) process_backlog (net/core/dev.c:6676) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ... Fixes: f5b321bd37fb ("netfilter: nf_conntrack_sip: add TCP support") Reported-by: Weiming Shi Link: https://patch.msgid.link/netfilter-devel/20260712234201.3213635-1-xmei5@asu.edu Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nf_conntrack_sip.h | 2 +- net/netfilter/nf_conntrack_sip.c | 2 +- net/netfilter/nf_nat_sip.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h index dbc614dfe0d5..aafa0c04f917 100644 --- a/include/linux/netfilter/nf_conntrack_sip.h +++ b/include/linux/netfilter/nf_conntrack_sip.h @@ -115,7 +115,7 @@ struct nf_nat_sip_hooks { unsigned int *datalen); void (*seq_adjust)(struct sk_buff *skb, - unsigned int protoff, s16 off); + unsigned int protoff, s32 off); unsigned int (*expect)(struct sk_buff *skb, unsigned int protoff, diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index f3f90a866338..e4a70d1d77b0 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -1663,7 +1663,7 @@ static int sip_help_tcp(struct sk_buff *skb, unsigned int protoff, unsigned int matchoff, matchlen; unsigned int msglen, origlen; const char *dptr, *end; - s16 diff, tdiff = 0; + s32 diff, tdiff = 0; int ret = NF_ACCEPT; unsigned long clen; bool term; diff --git a/net/netfilter/nf_nat_sip.c b/net/netfilter/nf_nat_sip.c index aea02f6aff09..a93eaf0f7d30 100644 --- a/net/netfilter/nf_nat_sip.c +++ b/net/netfilter/nf_nat_sip.c @@ -321,7 +321,7 @@ next: } static void nf_nat_sip_seq_adjust(struct sk_buff *skb, unsigned int protoff, - s16 off) + s32 off) { enum ip_conntrack_info ctinfo; struct nf_conn *ct = nf_ct_get(skb, &ctinfo); -- cgit v1.2.3 From 1d6123f87eebb5148844cd43045c6e598799720b Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Mon, 13 Jul 2026 14:53:22 +0200 Subject: selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The IPIP and IP6IP6 tunnel tests call check_counters() to verify flowtable offloading occurred, but the flow-add rule only matches meta oif "veth1". When traffic is routed through a tunnel device, oif is the tunnel interface (tun0, tun6, etc.), not veth1, so the flow-add rule never fires, no flowtable entry is created, and counters stay at zero — producing a silent false pass. Fix by adding tunnel-specific flow-add rules for each tunnel interface. These match TCP dport 12345 traffic before the bare accept rule, set ct mark, add the flow to the flowtable, and increment routed_orig. The existing routed_repl rule on veth0 already handles the reply direction since decapsulated reply packets exit through the physical interface. Also add check_counters() for the IP6IP6 non-VLAN and IP6IP6-over-VLAN tests which previously used a bare PASS message. Fixes: fe8313316eaf ("selftests: netfilter: nft_flowtable.sh: Add IPIP flowtable selftest") Fixes: 5e5180352193 ("selftests: netfilter: nft_flowtable.sh: Add IP6IP6 flowtable selftest") Signed-off-by: Lorenzo Bianconi Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/net/netfilter/nft_flowtable.sh | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/netfilter/nft_flowtable.sh b/tools/testing/selftests/net/netfilter/nft_flowtable.sh index fb1c59d45567..449c518bd947 100755 --- a/tools/testing/selftests/net/netfilter/nft_flowtable.sh +++ b/tools/testing/selftests/net/netfilter/nft_flowtable.sh @@ -617,7 +617,11 @@ ip -6 -net "$nsr2" route add default via fee1:3::1 ip -net "$ns2" route add default via 10.0.2.1 ip -6 -net "$ns2" route add default via dead:2::1 +ip netns exec "$nsr1" nft -a insert rule inet filter forward \ + 'meta oif tun0 tcp dport 12345 ct mark set 1 flow add @f1 counter name routed_orig accept' ip netns exec "$nsr1" nft -a insert rule inet filter forward 'meta oif tun0 accept' +ip netns exec "$nsr1" nft -a insert rule inet filter forward \ + 'meta oif tun6 tcp dport 12345 ct mark set 1 flow add @f1 counter name routed_orig accept' ip netns exec "$nsr1" nft -a insert rule inet filter forward 'meta oif tun6 accept' ip netns exec "$nsr1" nft -a insert rule inet filter forward \ 'meta oif "veth0" tcp sport 12345 ct mark set 1 flow add @f1 counter name routed_repl accept' @@ -629,7 +633,7 @@ if ! test_tcp_forwarding_nat "$ns1" "$ns2" 1 "IPIP tunnel"; then fi if test_tcp_forwarding "$ns1" "$ns2" 1 6 "[dead:2::99]" 12345; then - echo "PASS: flow offload for ns1/ns2 IP6IP6 tunnel" + check_counters "flow offload for ns1/ns2 IP6IP6 tunnel" else echo "FAIL: flow offload for ns1/ns2 with IP6IP6 tunnel" 1>&2 ip netns exec "$nsr1" nft list ruleset @@ -642,6 +646,8 @@ ip -net "$nsr1" link set veth1.10 up ip -net "$nsr1" addr add 192.168.20.1/24 dev veth1.10 ip -net "$nsr1" addr add fee1:4::1/64 dev veth1.10 nodad ip netns exec "$nsr1" sysctl net.ipv4.conf.veth1/10.forwarding=1 > /dev/null +ip netns exec "$nsr1" nft -a insert rule inet filter forward \ + 'meta oif veth1.10 tcp dport 12345 ct mark set 1 flow add @f1 counter name routed_orig accept' ip netns exec "$nsr1" nft -a insert rule inet filter forward 'meta oif veth1.10 accept' ip -net "$nsr1" link add name tun0.10 type ipip local 192.168.20.1 remote 192.168.20.2 @@ -649,6 +655,8 @@ ip -net "$nsr1" link set tun0.10 up ip -net "$nsr1" addr add 192.168.200.1/24 dev tun0.10 ip -net "$nsr1" route change default via 192.168.200.2 ip netns exec "$nsr1" sysctl net.ipv4.conf.tun0/10.forwarding=1 > /dev/null +ip netns exec "$nsr1" nft -a insert rule inet filter forward \ + 'meta oif tun0.10 tcp dport 12345 ct mark set 1 flow add @f1 counter name routed_orig accept' ip netns exec "$nsr1" nft -a insert rule inet filter forward 'meta oif tun0.10 accept' ip -net "$nsr1" link add name tun6.10 type ip6tnl local fee1:4::1 remote fee1:4::2 encaplimit none @@ -656,6 +664,8 @@ ip -net "$nsr1" link set tun6.10 up ip -net "$nsr1" addr add fee1:5::1/64 dev tun6.10 nodad ip -6 -net "$nsr1" route delete default ip -6 -net "$nsr1" route add default via fee1:5::2 +ip netns exec "$nsr1" nft -a insert rule inet filter forward \ + 'meta oif tun6.10 tcp dport 12345 ct mark set 1 flow add @f1 counter name routed_orig accept' ip netns exec "$nsr1" nft -a insert rule inet filter forward 'meta oif tun6.10 accept' ip -net "$nsr2" link add link veth0 name veth0.10 type vlan id 10 @@ -683,7 +693,7 @@ if ! test_tcp_forwarding_nat "$ns1" "$ns2" 1 "IPIP tunnel over vlan"; then fi if test_tcp_forwarding "$ns1" "$ns2" 1 6 "[dead:2::99]" 12345; then - echo "PASS: flow offload for ns1/ns2 IP6IP6 tunnel over vlan" + check_counters "flow offload for ns1/ns2 IP6IP6 tunnel over vlan" else echo "FAIL: flow offload for ns1/ns2 with IP6IP6 tunnel over vlan" 1>&2 ip netns exec "$nsr1" nft list ruleset -- cgit v1.2.3 From 4aa63842fc92de1bce59d4709a0d32e718890bb2 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 13 Jul 2026 00:26:04 +0200 Subject: netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair() Add a new function to insert a pair of expectations, this is required by the SIP and H323 NAT helpers. The spinlock is held to check if there is a slot for both expectations, in such case, insert them. This removes the need for nf_ct_unexpect_related() inside the loop to find a pair of consecutive ports, otherwise inserting expectations whose dead flag is already set on can happen. Bump master_help->expecting for the expectation class after checking if the expectation fits in the master expectation list, which is needed for this new _pair() function variant to run the eviction routine including the preallocated slot for the first expectation in the pair. Fixes: b8b09dc2bf35 ("netfilter: nf_conntrack_expect: use conntrack GC to reap expectations") Reported-by: Jaeyeong Lee Link: https://patch.msgid.link/178377968720.33756.12204817361601593230@proton.me/ Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_conntrack_expect.h | 3 +++ net/ipv4/netfilter/nf_nat_h323.c | 22 ++++++------------ net/netfilter/nf_conntrack_expect.c | 35 ++++++++++++++++++++++++++++- net/netfilter/nf_nat_sip.c | 20 +++++------------ 4 files changed, 50 insertions(+), 30 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_expect.h b/include/net/netfilter/nf_conntrack_expect.h index c024345c9bd8..26d6babd92fc 100644 --- a/include/net/netfilter/nf_conntrack_expect.h +++ b/include/net/netfilter/nf_conntrack_expect.h @@ -161,6 +161,9 @@ static inline int nf_ct_expect_related(struct nf_conntrack_expect *expect, return nf_ct_expect_related_report(expect, 0, 0, flags); } +int nf_ct_expect_related_pair(struct nf_conntrack_expect *expect[], + unsigned int flag); + struct nf_conn_help; void nf_ct_expectation_gc(struct nf_conn_help *master_help); diff --git a/net/ipv4/netfilter/nf_nat_h323.c b/net/ipv4/netfilter/nf_nat_h323.c index 183e8a3ff2ba..6bcd6734769b 100644 --- a/net/ipv4/netfilter/nf_nat_h323.c +++ b/net/ipv4/netfilter/nf_nat_h323.c @@ -182,6 +182,7 @@ static int nat_rtp_rtcp(struct sk_buff *skb, struct nf_conn *ct, struct nf_conntrack_expect *rtp_exp, struct nf_conntrack_expect *rtcp_exp) { + struct nf_conntrack_expect *rtp_pair[2] = { rtp_exp, rtcp_exp }; struct nf_ct_h323_master *info = nfct_help_data(ct); int dir = CTINFO2DIR(ctinfo); int i; @@ -227,22 +228,13 @@ static int nat_rtp_rtcp(struct sk_buff *skb, struct nf_conn *ct, int ret; rtp_exp->tuple.dst.u.udp.port = htons(nated_port); - ret = nf_ct_expect_related(rtp_exp, 0); + rtcp_exp->tuple.dst.u.udp.port = htons(nated_port + 1); + ret = nf_ct_expect_related_pair(rtp_pair, 0); if (ret == 0) { - rtcp_exp->tuple.dst.u.udp.port = - htons(nated_port + 1); - ret = nf_ct_expect_related(rtcp_exp, 0); - if (ret == 0) - break; - else if (ret == -EBUSY) { - nf_ct_unexpect_related(rtp_exp); - continue; - } else if (ret < 0) { - nf_ct_unexpect_related(rtp_exp); - nated_port = 0; - break; - } - } else if (ret != -EBUSY) { + break; + } else if (ret == -EBUSY) { + continue; + } else if (ret < 0) { nated_port = 0; break; } diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index 7ae68d60586a..8a3b9e33e94f 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -427,7 +427,6 @@ static void nf_ct_expect_insert(struct nf_conntrack_expect *exp, exp->timeout += helper->expect_policy[exp->class].timeout * HZ; hlist_add_head_rcu(&exp->lnode, &master_help->expectations); - master_help->expecting[exp->class]++; hlist_add_head_rcu(&exp->hnode, &nf_ct_expect_hash[h]); cnet = nf_ct_pernet(net); @@ -534,6 +533,7 @@ int nf_ct_expect_related_report(struct nf_conntrack_expect *expect, if (ret < 0) goto out; + master_help->expecting[expect->class]++; nf_ct_expect_insert(expect, master_help); nf_ct_expect_event_report(IPEXP_NEW, expect, portid, report); @@ -546,6 +546,39 @@ out: } EXPORT_SYMBOL_GPL(nf_ct_expect_related_report); +int nf_ct_expect_related_pair(struct nf_conntrack_expect *expect[], + unsigned int flags) +{ + struct nf_conn_help *master_help; + int i, ret; + + spin_lock_bh(&nf_conntrack_expect_lock); + master_help = nfct_help(expect[0]->master); + if (!master_help || master_help != nfct_help(expect[1]->master)) { + ret = -EINVAL; + goto out; + } + + for (i = 0; i < 2; i++) { + ret = __nf_ct_expect_check(expect[i], master_help, flags); + if (ret < 0) { + if (i == 1) + master_help->expecting[expect[0]->class]--; + goto out; + } + master_help->expecting[expect[i]->class]++; + } + + for (i = 0; i < 2; i++) { + nf_ct_expect_insert(expect[i], master_help); + nf_ct_expect_event_report(IPEXP_NEW, expect[i], 0, 0); + } +out: + spin_unlock_bh(&nf_conntrack_expect_lock); + return ret; +} +EXPORT_SYMBOL_GPL(nf_ct_expect_related_pair); + void nf_ct_expect_iterate_destroy(bool (*iter)(struct nf_conntrack_expect *e, void *data), void *data) { diff --git a/net/netfilter/nf_nat_sip.c b/net/netfilter/nf_nat_sip.c index a93eaf0f7d30..133bd713fe0c 100644 --- a/net/netfilter/nf_nat_sip.c +++ b/net/netfilter/nf_nat_sip.c @@ -592,6 +592,7 @@ static unsigned int nf_nat_sdp_media(struct sk_buff *skb, unsigned int protoff, unsigned int medialen, union nf_inet_addr *rtp_addr) { + struct nf_conntrack_expect *rtp_pair[2] = { rtp_exp, rtcp_exp }; enum ip_conntrack_info ctinfo; struct nf_conn *ct = nf_ct_get(skb, &ctinfo); enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo); @@ -622,24 +623,15 @@ static unsigned int nf_nat_sdp_media(struct sk_buff *skb, unsigned int protoff, int ret; rtp_exp->tuple.dst.u.udp.port = htons(port); - ret = nf_ct_expect_related(rtp_exp, - NF_CT_EXP_F_SKIP_MASTER); - if (ret == -EBUSY) - continue; - else if (ret < 0) { - port = 0; - break; - } rtcp_exp->tuple.dst.u.udp.port = htons(port + 1); - ret = nf_ct_expect_related(rtcp_exp, - NF_CT_EXP_F_SKIP_MASTER); + + ret = nf_ct_expect_related_pair(rtp_pair, + NF_CT_EXP_F_SKIP_MASTER); if (ret == 0) break; - else if (ret == -EBUSY) { - nf_ct_unexpect_related(rtp_exp); + else if (ret == -EBUSY) continue; - } else if (ret < 0) { - nf_ct_unexpect_related(rtp_exp); + else if (ret < 0) { port = 0; break; } -- cgit v1.2.3 From 6842427bf2990271c771081f11fd8fab17f86c82 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 15 Jul 2026 12:43:18 -0500 Subject: cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq This requirement was introduced by commit 8f8b42c1fcc93 ("cpufreq: amd-pstate: optimize the initial frequency values verification") specifically to aid in debugging BIOS issues with invalid _CPC tables on some older systems. This requirement is too tight for new systems though as some systems actually have lowest nonlinear frequency identical to minimum frequency. Allow that combo to work. Signed-off-by: Mario Limonciello Reviewed-by: K Prateek Nayak Tested-by: K Prateek Nayak Link: https://lore.kernel.org/r/20260715174318.18235-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello --- drivers/cpufreq/amd-pstate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index a74a4cf99d22..3d72337a3336 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -1031,7 +1031,7 @@ static int amd_pstate_init_freq(struct amd_cpudata *cpudata) return -EINVAL; } - if (lowest_nonlinear_freq <= min_freq || lowest_nonlinear_freq > nominal_freq) { + if (lowest_nonlinear_freq < min_freq || lowest_nonlinear_freq > nominal_freq) { pr_err("lowest_nonlinear_freq(%d) value is out of range [min_freq(%d), nominal_freq(%d)]\n", lowest_nonlinear_freq, min_freq, nominal_freq); return -EINVAL; -- cgit v1.2.3 From 08fc1e7b31f8832e356ede8afae1ad1ff0d5a1fc Mon Sep 17 00:00:00 2001 From: Rong Zhang Date: Wed, 22 Jul 2026 02:13:43 +0800 Subject: cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware X86_FEATURE_HW_PSTATE indicates if the processor supports frequency scaling or not. Without it, the driver is unusable and thus will not load. This check also prevents the driver from loading in guests and thus not confuse users with misleading prints. Reviewed-by: Michael Kelley Tested-by: Michael Kelley Acked-by: Mario Limonciello (AMD) Reviewed-by: K Prateek Nayak Tested-by: K Prateek Nayak Acked-by: Borislav Petkov (AMD) Signed-off-by: Rong Zhang Link: https://lore.kernel.org/r/20260722-amd-pstate-vm-v4-1-d6607d9e9d9a@rong.moe Signed-off-by: Mario Limonciello --- drivers/cpufreq/amd-pstate.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 3d72337a3336..3a6b4b224a66 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -2167,6 +2167,7 @@ static struct cpufreq_driver amd_pstate_epp_driver = { }; /* + * Processors without frequency scaling support can't do CPPC. * CPPC function is not supported for family ID 17H with model_ID ranging from 0x10 to 0x2F. * show the debug message that helps to check if the CPU has CPPC support for loading issue. */ @@ -2175,6 +2176,11 @@ static bool amd_cppc_supported(void) struct cpuinfo_x86 *c = &cpu_data(0); bool warn = false; + if (!cpu_feature_enabled(X86_FEATURE_HW_PSTATE)) { + pr_debug_once("frequency scaling is not supported by the processor\n"); + return false; + } + if ((boot_cpu_data.x86 == 0x17) && (boot_cpu_data.x86_model < 0x30)) { pr_debug_once("CPPC feature is not supported by the processor\n"); return false; -- cgit v1.2.3 From d6f0248f04a96249660591e47fcf37ba98ac7ea3 Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Tue, 30 Jun 2026 14:57:54 -0700 Subject: mshv: fix hv_input_get_system_property struct Keep it in sync with the correct definition. The old code worked by chance. Fixes: e68bda71a2384 ("hyperv: Add new Hyper-V headers in include/hyperv") Cc: stable@kernel.org Signed-off-by: Wei Liu --- include/hyperv/hvhdk_mini.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/hyperv/hvhdk_mini.h b/include/hyperv/hvhdk_mini.h index b4cb2fa26e9b..035ba20870f7 100644 --- a/include/hyperv/hvhdk_mini.h +++ b/include/hyperv/hvhdk_mini.h @@ -184,8 +184,9 @@ enum hv_dynamic_processor_feature_property { struct hv_input_get_system_property { u32 property_id; /* enum hv_system_property */ + u32 reserved; union { - u32 as_uint32; + u64 as_uint64; #if IS_ENABLED(CONFIG_X86) /* enum hv_dynamic_processor_feature_property */ u32 hv_processor_feature; -- cgit v1.2.3 From 233a4d3a39fc1585f5e271b2adab43c6af025ae0 Mon Sep 17 00:00:00 2001 From: Ruoyu Wang Date: Tue, 7 Jul 2026 23:05:28 +0800 Subject: drm/mediatek: Check CRTC state before freeing mtk_crtc_reset() destroys the current CRTC state only when crtc->state is non-NULL, but it always converts crtc->state to struct mtk_crtc_state and passes the result to kfree(). When reset is called without an existing state, container_of(NULL, ...) does not produce NULL. Keep the mtk state free in the same crtc->state guard as the helper state destruction. This issue was found by a static analysis checker and confirmed by manual source review. Fixes: 2d267b81898e ("drm/mtk: Use __drm_atomic_helper_crtc_reset") Signed-off-by: Ruoyu Wang Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260707150528.2270739-1-ruoyuw560@gmail.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_crtc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_crtc.c b/drivers/gpu/drm/mediatek/mtk_crtc.c index 8e552cdc3b53..97e3ff412e6e 100644 --- a/drivers/gpu/drm/mediatek/mtk_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_crtc.c @@ -154,10 +154,10 @@ static void mtk_crtc_reset(struct drm_crtc *crtc) { struct mtk_crtc_state *state; - if (crtc->state) + if (crtc->state) { __drm_atomic_helper_crtc_destroy_state(crtc->state); - - kfree(to_mtk_crtc_state(crtc->state)); + kfree(to_mtk_crtc_state(crtc->state)); + } crtc->state = NULL; state = kzalloc_obj(*state); -- cgit v1.2.3 From d19d8542808c3be5f4af849da6509e877b74d811 Mon Sep 17 00:00:00 2001 From: Guangshuo Li Date: Mon, 13 Jul 2026 19:29:57 +0800 Subject: drm/mediatek: mtk_hdmi: Fix DDC adapter double put in v2 mtk_hdmi_common_probe() gets the DDC adapter with of_find_i2c_adapter_by_node() and registers a devm action to release the adapter device reference with put_device(). The HDMI v2 remove callback also calls i2c_put_adapter() on the same DDC adapter. This is not paired with of_find_i2c_adapter_by_node(): it drops the adapter device reference before the devm action drops it again, and it also puts a module reference that was never taken. Remove the extra i2c_put_adapter() call and drop the now-empty HDMI v2 remove callback. The common devm action releases the adapter device reference. Fixes: 8d0f79886273 ("drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188") Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold Signed-off-by: Guangshuo Li Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260713112957.884640-1-lgs201920130244@gmail.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_hdmi_v2.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c b/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c index 7bbf463056c9..ffe456238a2b 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c @@ -1499,13 +1499,6 @@ static int mtk_hdmi_v2_probe(struct platform_device *pdev) return 0; } -static void mtk_hdmi_v2_remove(struct platform_device *pdev) -{ - struct mtk_hdmi *hdmi = platform_get_drvdata(pdev); - - i2c_put_adapter(hdmi->ddc_adpt); -} - static const struct of_device_id mtk_drm_hdmi_v2_of_ids[] = { { .compatible = "mediatek,mt8188-hdmi-tx", .data = &mtk_hdmi_conf_mt8188 }, { .compatible = "mediatek,mt8195-hdmi-tx", .data = &mtk_hdmi_conf_mt8195 }, @@ -1515,7 +1508,6 @@ MODULE_DEVICE_TABLE(of, mtk_drm_hdmi_v2_of_ids); static struct platform_driver mtk_hdmi_v2_driver = { .probe = mtk_hdmi_v2_probe, - .remove = mtk_hdmi_v2_remove, .driver = { .name = "mediatek-drm-hdmi-v2", .of_match_table = mtk_drm_hdmi_v2_of_ids, -- cgit v1.2.3 From ab96bc97cdcf77c6f38634c73d00074c4f92c324 Mon Sep 17 00:00:00 2001 From: Michael Kelley Date: Sun, 7 Jun 2026 19:06:16 -0700 Subject: Drivers: hv: vmbus: Set DMA coherent mask for VMBus devices In current code, the coherent_dma_mask for VMBus devices is not set, so it has the default value of 0, which essentially means "invalid". Because drivers for VMBus devices do not use dma_alloc_*() functions, the usual use of the coherent mask does not occur, and no errors result. However, a valid coherent_dma_mask may be needed even though the drivers don't use dma_alloc_*() functions. In a CoCo VM, the VMBus storvsc and netvsc drivers must bounce buffer DMA operations through the swiotlb because the Hyper-V host can't DMA into encrypted guest memory. If the kernel is built with CONFIG_SWIOTLB_DYNAMIC and the initial swiotlb size is small, swiotlb code may need to grow the swiotlb in response to a DMA mapping request. That growth first allocates a transient pool while the swiotlb is expanded in the background. The transient pool memory is allocated from the DMA atomic pools, and the allocation code checks for a valid coherent_dma_mask. With current code, this check fails, then the DMA mapping request from the storvsc or netvsc driver fails, and finally an I/O error occurs. Fix this problem by setting coherent_dma_mask for VMBus devices at the same time that dma_mask is set. Being a synthetic bus, VMBus does not have any restrictions on coherent DMA, so the coherent mask is set to the full 64 bits for all VMBus devices, just like with dma_mask. Signed-off-by: Michael Kelley Signed-off-by: Wei Liu --- drivers/hv/vmbus_drv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 23206640c613..a6b9a33db657 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -2169,6 +2169,7 @@ int vmbus_device_register(struct hv_device *child_device_obj) child_device_obj->device.dma_parms = &child_device_obj->dma_parms; child_device_obj->device.dma_mask = &child_device_obj->dma_mask; dma_set_mask(&child_device_obj->device, DMA_BIT_MASK(64)); + dma_set_coherent_mask(&child_device_obj->device, DMA_BIT_MASK(64)); /* * Register with the LDM. This will kick off the driver/device -- cgit v1.2.3 From b496f042e0da26dd673806870c204adfe697f169 Mon Sep 17 00:00:00 2001 From: Yousef Alhouseen Date: Thu, 25 Jun 2026 20:13:14 +0200 Subject: mshv_vtl: clear hypercall output before copyout mshv_vtl_hvcall_call() copies output_size bytes to userspace. The output page is freshly allocated. Userspace chooses the copyout length. If the hypercall writes less, the tail can contain stale page data. Clear the copied range before issuing the hypercall. Also check both bounce page allocations before either page is used. Signed-off-by: Yousef Alhouseen Reviewed-by: Michael Kelley Signed-off-by: Wei Liu --- drivers/hv/mshv_vtl_main.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/hv/mshv_vtl_main.c b/drivers/hv/mshv_vtl_main.c index 0d3d4161974f..dbf03b6676cd 100644 --- a/drivers/hv/mshv_vtl_main.c +++ b/drivers/hv/mshv_vtl_main.c @@ -1148,12 +1148,22 @@ static int mshv_vtl_hvcall_call(struct mshv_vtl_hvcall_fd *fd, */ in = (void *)__get_free_page(GFP_KERNEL); out = (void *)__get_free_page(GFP_KERNEL); + if (!in || !out) { + ret = -ENOMEM; + goto free_pages; + } if (copy_from_user(in, (void __user *)hvcall.input_ptr, hvcall.input_size)) { ret = -EFAULT; goto free_pages; } + /* + * The caller supplies output_size, so clear the range copied back to + * userspace in case the hypercall writes fewer bytes than requested. + */ + memset(out, 0, hvcall.output_size); + hvcall.status = hv_do_hypercall(hvcall.control, in, out); if (copy_to_user((void __user *)hvcall.output_ptr, out, hvcall.output_size)) { -- cgit v1.2.3 From ec08dd5b9ffa52980908805bdc8a55a8f1bc6667 Mon Sep 17 00:00:00 2001 From: Yi Xie Date: Wed, 8 Jul 2026 09:28:52 +0800 Subject: mshv_vtl: fix fd leak in mshv_ioctl_create_vtl() put_unused_fd() if anon_inode_getfile() fails. Fixes: 7bfe3b8ea6e30 ("Drivers: hv: Introduce mshv_vtl driver") Signed-off-by: Yi Xie Reviewed-by: Hamza Mahfooz Signed-off-by: Wei Liu --- drivers/hv/mshv_vtl_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hv/mshv_vtl_main.c b/drivers/hv/mshv_vtl_main.c index dbf03b6676cd..5ba1efb3b4e7 100644 --- a/drivers/hv/mshv_vtl_main.c +++ b/drivers/hv/mshv_vtl_main.c @@ -129,6 +129,7 @@ mshv_ioctl_create_vtl(void __user *user_arg, struct device *module_dev) file = anon_inode_getfile("mshv_vtl", &mshv_vtl_fops, vtl, O_RDWR); if (IS_ERR(file)) { + put_unused_fd(fd); kfree(vtl); return PTR_ERR(file); } -- cgit v1.2.3 From 8c7ab779c8850f4dab8473463cca9a7d52fdaecc Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 21 Jul 2026 17:32:15 +0200 Subject: Drivers: hv: vmbus: Replace lockdep_hardirq_threaded() with lockdep annotation lockdep_hardirq_threaded() is supposed to be used within IRQ core code and not within drivers. It is not obvious from within the driver, that this is the only interrupt service routing and that it is not shared handler. Replace lockdep_hardirq_threaded() with a lockdep annotation limiting threaded context on PREEMPT_RT to __vmbus_isr(). Fixes: f8e6343b7a89c ("Drivers: hv: vmbus: Use kthread for vmbus interrupts on PREEMPT_RT") Signed-off-by: Sebastian Andrzej Siewior Reviewed-by: Michael Kelley Signed-off-by: Wei Liu --- drivers/hv/vmbus_drv.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index a6b9a33db657..7d095c0add25 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1384,8 +1384,19 @@ void vmbus_isr(void) if (IS_ENABLED(CONFIG_PREEMPT_RT)) { vmbus_irqd_wake(); } else { - lockdep_hardirq_threaded(); + static DEFINE_WAIT_OVERRIDE_MAP(vmbus_map, LD_WAIT_CONFIG); + + /* + * vmbus_isr is never force-threaded and always invoked at hard + * IRQ level. __vmbus_isr() below can acquire a spinlock_t + * which becomes a sleeping lock and must not be acquired in + * this context. Therefore on PREEMPT_RT this will be threaded + * via vmbus_irqd_wake(). On non-PREEMPT the annotation lets + * lockdep know that acquiring a spinlock_t is not an issue. + */ + lock_map_acquire_try(&vmbus_map); __vmbus_isr(); + lock_map_release(&vmbus_map); } } EXPORT_SYMBOL_FOR_MODULES(vmbus_isr, "mshv_vtl"); -- cgit v1.2.3 From 66688e655dcb1e9d06fa2c0651bd9fd588d2a2c3 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 21 Jul 2026 17:32:16 +0200 Subject: Drivers: hv: vmbus: Remove vmbus_irq_initialized vmbus_irq_initialized is only true if the registration of the per-CPU threads succeeded. If it failed, the whole registration aborts and the vmbus_exit() path is never called. Remove vmbus_irq_initialized. Reviewed-by: Michael Kelley Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Wei Liu --- drivers/hv/vmbus_drv.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 7d095c0add25..6824bd7cb3c4 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1369,8 +1369,6 @@ static void run_vmbus_irqd(unsigned int cpu) __vmbus_isr(); } -static bool vmbus_irq_initialized; - static struct smp_hotplug_thread vmbus_irq_threads = { .store = &vmbus_irqd, .setup = vmbus_irqd_setup, @@ -1497,11 +1495,10 @@ static int vmbus_bus_init(void) * the VMbus interrupt handler. */ - if (IS_ENABLED(CONFIG_PREEMPT_RT) && !vmbus_irq_initialized) { + if (IS_ENABLED(CONFIG_PREEMPT_RT)) { ret = smpboot_register_percpu_thread(&vmbus_irq_threads); if (ret) goto err_kthread; - vmbus_irq_initialized = true; } if (vmbus_irq == -1) { @@ -1545,10 +1542,8 @@ err_connect: else free_percpu_irq(vmbus_irq, &vmbus_evt); err_setup: - if (IS_ENABLED(CONFIG_PREEMPT_RT) && vmbus_irq_initialized) { + if (IS_ENABLED(CONFIG_PREEMPT_RT)) smpboot_unregister_percpu_thread(&vmbus_irq_threads); - vmbus_irq_initialized = false; - } err_kthread: bus_unregister(&hv_bus); return ret; @@ -3046,10 +3041,9 @@ static void __exit vmbus_exit(void) hv_remove_vmbus_handler(); else free_percpu_irq(vmbus_irq, &vmbus_evt); - if (IS_ENABLED(CONFIG_PREEMPT_RT) && vmbus_irq_initialized) { + if (IS_ENABLED(CONFIG_PREEMPT_RT)) smpboot_unregister_percpu_thread(&vmbus_irq_threads); - vmbus_irq_initialized = false; - } + for_each_online_cpu(cpu) { struct hv_per_cpu_context *hv_cpu = per_cpu_ptr(hv_context.cpu_context, cpu); -- cgit v1.2.3 From 649dd135491945afa544351e3e6d4a727de87020 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsburskii Date: Thu, 7 May 2026 15:43:49 +0000 Subject: mshv: Fix duplicate GSI detection for GSI 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The duplicate routing entry check in mshv_update_routing_table() uses guest_irq_num != 0 to detect whether a GSI slot is already occupied. This fails for GSI 0 because its guest_irq_num is 0 both when the slot is unused (zero-initialized) and when legitimately assigned. As a result, duplicate entries for GSI 0 are silently accepted, with the second entry overwriting the first — corrupting the routing table without any error reported to userspace. While GSI 0 (legacy timer) is unlikely to appear in MSI-based routing in practice, the check is semantically wrong — it conflates "uninitialized" with "GSI number 0." Use girq_entry_valid instead, which is explicitly set to true when an entry is populated and remains zero for unused slots regardless of the GSI number. Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii Reviewed-by: Anirudh Rayabharam (Microsoft) Signed-off-by: Wei Liu --- drivers/hv/mshv_irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/mshv_irq.c b/drivers/hv/mshv_irq.c index b3142c84dcbc..65a4ffc82d56 100644 --- a/drivers/hv/mshv_irq.c +++ b/drivers/hv/mshv_irq.c @@ -51,7 +51,7 @@ int mshv_update_routing_table(struct mshv_partition *partition, /* * Allow only one to one mapping between GSI and MSI routing. */ - if (girq->guest_irq_num != 0) { + if (girq->girq_entry_valid) { r = -EINVAL; goto out; } -- cgit v1.2.3 From a9708e550d11a53b22d932cdbfaa10c26346a2d0 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsburskii Date: Thu, 7 May 2026 15:43:59 +0000 Subject: mshv: Fix sleeping under spinlock in mshv_portid_alloc idr_alloc() is called with GFP_KERNEL inside idr_lock(), which holds a spinlock. GFP_KERNEL allows the allocator to sleep, triggering a sleeping-while-atomic bug. Fix by using idr_preload(GFP_KERNEL) before taking the lock to pre-allocate memory in a sleepable context, then idr_alloc() with GFP_NOWAIT inside the spinlock-protected section. Fixes: 621191d709b1 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii Reviewed-by: Anirudh Rayabharam (Microsoft) Signed-off-by: Wei Liu --- drivers/hv/mshv_portid_table.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hv/mshv_portid_table.c b/drivers/hv/mshv_portid_table.c index c349af1f0aaa..6f59b3e37624 100644 --- a/drivers/hv/mshv_portid_table.c +++ b/drivers/hv/mshv_portid_table.c @@ -40,12 +40,14 @@ mshv_port_table_fini(void) int mshv_portid_alloc(struct port_table_info *info) { - int ret = 0; + int ret; + idr_preload(GFP_KERNEL); idr_lock(&port_table_idr); ret = idr_alloc(&port_table_idr, info, PORTID_MIN, - PORTID_MAX, GFP_KERNEL); + PORTID_MAX, GFP_NOWAIT); idr_unlock(&port_table_idr); + idr_preload_end(); return ret; } -- cgit v1.2.3 From cbfe2b24a1ea9de35032dbdd100fdc700f5be92d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Carlos=20L=C3=B3pez?= Date: Wed, 15 Jul 2026 12:51:37 +0200 Subject: KVM: arm64: vgic: Fix race between LPI release and re-registration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a potential race between decrementing an LPI's reference count and evicting that structure from the LPI xarray. LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa). When the reference count of an LPI structure drops to zero, vgic_release_lpi_locked() removes the structure from the xarray and frees it under the xarray lock. However, the release of an LPI can race with a concurrent LPI re-registration with the same INTID via vgic_add_lpi() on another CPU, since the reference count drop and the xarray eviction are not performed in a single atomic step. This can happen e.g. if the guest issues a DISCARD while the LPI is still referenced from a vCPU's active-pending list (ap_list), and the same INTID is re-mapped via MAPTI. Particularly, vgic_release_lpi_locked() is called from two distinct paths: direct release via vgic_put_irq(), and deferred release via vgic_release_deleted_lpis(). During direct release, the issue can result in deleting a newly registered LPI from the xarray: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq() __vgic_put_irq() refcount_dec_and_test() vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(old_irq) == false new IRQ inserted --> __xa_store(.., intid, ..) xa_unlock_irqrestore() xa_lock_irqsave(); vgic_release_lpi_locked() __xa_erase(.., irq->intid) <-- BUG: new IRQ is erased kfree_rcu(old_irq) During the deferred release path, the old IRQ can be leaked: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq_norelease() __vgic_put_irq() refcount_dec_and_test() irq->pending_release = true vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(oldirq) == false BUG: old IRQ overwritten --> __xa_store(.., intid, ..) xa_unlock_irqrestore() vgic_release_deleted_lpis() xa_lock_irqsave() xa_for_each() { .. } <-- old IRQ with pending_release = true is gone, so it cannot be released To fix the direct release path, move the reference count drop inside the xarray lock, making sure that vgic_add_lpi() never encounters the to-be-released LPI. In the deferred release path, the refcount drop must happen under a raw spinlock, so the xarray lock cannot be grabbed, and the same solution does not work. Instead, update vgic_add_lpi(), so that if it evicts an LPI from the xarray, it takes on the responsibility of freeing it. Consequently, an LPI may now be freed concurrently after a deferred release drops the refcount, so accessing the pending_release field is no longer safe from use-after-free. Delete all uses of the flag, and update vgic_release_deleted_lpis() to identify orphaned LPIs purely based on their refcount. Reported-by: Claude:claude-opus-4-6 Fixes: 3a08a6ca7c37 ("KVM: arm64: vgic-v3: Use bare refcount for VGIC LPIs") Fixes: d54594accf73 ("KVM: arm64: vgic-v3: Erase LPIs from xarray outside of raw spinlocks") Signed-off-by: Carlos López Link: https://patch.msgid.link/20260715105137.3973823-4-clopez@suse.de Signed-off-by: Marc Zyngier --- arch/arm64/kvm/vgic/vgic-its.c | 24 ++++++++++++++++-------- arch/arm64/kvm/vgic/vgic.c | 18 ++++++++---------- include/kvm/arm_vgic.h | 3 --- 3 files changed, 24 insertions(+), 21 deletions(-) diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c index 740b39875728..5c5d1772147d 100644 --- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -116,18 +116,26 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid, kfree(irq); irq = oldirq; } else { - ret = xa_err(__xa_store(&dist->lpi_xa, intid, irq, 0)); - } - - xa_unlock_irqrestore(&dist->lpi_xa, flags); + /* + * The entry is either empty or contains a dead LPI (refcount=0) + * from the deferred release path, pending cleanup by + * vgic_release_deleted_lpis(). Evict and free it if present. + */ + oldirq = __xa_store(&dist->lpi_xa, intid, irq, 0); + ret = xa_err(oldirq); + if (ret) { + xa_unlock_irqrestore(&dist->lpi_xa, flags); + kfree(irq); - if (ret) { - xa_release(&dist->lpi_xa, intid); - kfree(irq); + return ERR_PTR(ret); + } - return ERR_PTR(ret); + if (oldirq && !WARN_ON_ONCE(refcount_read(&oldirq->refcount))) + kfree_rcu(oldirq, rcu); } + xa_unlock_irqrestore(&dist->lpi_xa, flags); + /* * We "cache" the configuration table entries in our struct vgic_irq's. * However we only have those structs for mapped IRQs, so we read in diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c index ccb7e3a90cd0..74bace10a22e 100644 --- a/arch/arm64/kvm/vgic/vgic.c +++ b/arch/arm64/kvm/vgic/vgic.c @@ -146,11 +146,7 @@ static __must_check bool __vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq) static __must_check bool vgic_put_irq_norelease(struct kvm *kvm, struct vgic_irq *irq) { - if (!__vgic_put_irq(kvm, irq)) - return false; - - irq->pending_release = true; - return true; + return __vgic_put_irq(kvm, irq); } void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq) @@ -167,12 +163,14 @@ void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq) guard(spinlock_irqsave)(&dist->lpi_xa.xa_lock); } - if (!__vgic_put_irq(kvm, irq)) + if (!irq_is_lpi(kvm, irq->intid)) return; - xa_lock_irqsave(&dist->lpi_xa, flags); - vgic_release_lpi_locked(dist, irq); - xa_unlock_irqrestore(&dist->lpi_xa, flags); + if (refcount_dec_and_lock_irqsave(&irq->refcount, + &dist->lpi_xa.xa_lock, &flags)) { + vgic_release_lpi_locked(dist, irq); + xa_unlock_irqrestore(&dist->lpi_xa, flags); + } } static void vgic_release_deleted_lpis(struct kvm *kvm) @@ -184,7 +182,7 @@ static void vgic_release_deleted_lpis(struct kvm *kvm) xa_lock_irqsave(&dist->lpi_xa, flags); xa_for_each(&dist->lpi_xa, intid, irq) { - if (irq->pending_release) + if (!refcount_read(&irq->refcount)) vgic_release_lpi_locked(dist, irq); } diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h index fe49fb56dc3c..cefddc9c621d 100644 --- a/include/kvm/arm_vgic.h +++ b/include/kvm/arm_vgic.h @@ -247,9 +247,6 @@ struct vgic_irq { * affinity reg (v3). */ - bool pending_release:1; /* Used for LPIs only, unreferenced IRQ - * pending a release */ - bool pending_latch:1; /* The pending latch state used to calculate * the pending state for both level * and edge triggered IRQs. */ -- cgit v1.2.3 From 21f12496fdd357ad4e1fcdd07dc80ab7378f7d24 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Carlos=20L=C3=B3pez?= Date: Wed, 15 Jul 2026 12:51:38 +0200 Subject: KVM: arm64: vgic: Mitigate potential LPI registration failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mitigate a potential failure when inserting a new LPI into the VGIC LPI xarray. When vgic_add_lpi() is preparing to register a new LPI, it pre-allocates an xarray entry using xa_reserve_irq(), so that it can later perform the insertion under the xarray lock without allocating. However, since xa_reserve_irq() is called before acquiring such lock, there is a potential race where xa_reserve_irq() observes a populated entry, thus not performing the allocation, and another CPU removes that entry before the xarray lock is grabbed to perform the insertion. CPU0 (Adding new LPI) CPU1 (Releasing LPI) ===================== =================== vgic_add_lpi() /* Entry populated, does not allocate */ xa_reserve_irq(.., intid, ..) vgic_release_deleted_lpis() xa_lock_irqsave() vgic_release_lpi_locked() xarray node freed --> __xa_erase(.., intid) xa_unlock_irqrestore() xa_lock_irqsave() xa_load(.., intid) == NULL vgic_try_get_irq_ref(NULL) == false __xa_store(.., intid, irq, 0) <-- xarray node was freed, gfp=0 cannot allocate, returns -ENOMEM This can happen e.g. if the guest issues a DISCARD while the LPI is still referenced from a vCPU's active-pending list (ap_list), and the same INTID is re-mapped via MAPTI. Mitigate this by passing GFP_NOWAIT to __xa_store(), so that the allocation can happen under the lock in the rare case that this condition is hit. Add __GFP_ACCOUNT as well to match xa_reserve_irq()'s flags. Reported-by: Sashiko Fixes: 1d6f83f60f79 ("KVM: arm64: vgic: Store LPIs in an xarray") Signed-off-by: Carlos López Link: https://patch.msgid.link/20260715105137.3973823-5-clopez@suse.de Signed-off-by: Marc Zyngier --- arch/arm64/kvm/vgic/vgic-its.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c index 5c5d1772147d..36ab3e492915 100644 --- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -121,7 +121,8 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid, * from the deferred release path, pending cleanup by * vgic_release_deleted_lpis(). Evict and free it if present. */ - oldirq = __xa_store(&dist->lpi_xa, intid, irq, 0); + oldirq = __xa_store(&dist->lpi_xa, intid, irq, + GFP_NOWAIT | __GFP_ACCOUNT); ret = xa_err(oldirq); if (ret) { xa_unlock_irqrestore(&dist->lpi_xa, flags); -- cgit v1.2.3 From bbece712cfc7f286b2908ac120dcf700279d87eb Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Wed, 15 Jul 2026 11:51:00 +0100 Subject: KVM: arm64: Fix hyp_trace clock disabling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the disable path in hyp_trace_clock_enable(), which fell through to re-initialize and reschedule the clock after cancelling the work. Return early instead. While at it, cleanup hyp_trace_clock::lock which is unused and hyp_trace_clock::running which is redundant: the trace_remote framework already serializes calls to the callback enable_tracing. Fixes: b22888917fa4 ("KVM: arm64: Sync boot clock with the nVHE/pKVM hyp") Signed-off-by: Vincent Donnefort Reviewed-by: Fuad Tabba (✓ DKIM/linux.dev) Link: https://patch.msgid.link/20260715105100.3178255-1-vdonnefort@google.com Signed-off-by: Marc Zyngier --- arch/arm64/kvm/hyp_trace.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kvm/hyp_trace.c b/arch/arm64/kvm/hyp_trace.c index 2411b4c32932..9bfa368dd841 100644 --- a/arch/arm64/kvm/hyp_trace.c +++ b/arch/arm64/kvm/hyp_trace.c @@ -37,8 +37,6 @@ static struct hyp_trace_clock { u32 shift; struct delayed_work work; struct completion ready; - struct mutex lock; - bool running; } hyp_clock; static void __hyp_clock_work(struct work_struct *work) @@ -110,12 +108,9 @@ static void hyp_trace_clock_enable(struct hyp_trace_clock *hyp_clock, bool enabl { struct system_time_snapshot snap; - if (hyp_clock->running == enable) - return; - if (!enable) { cancel_delayed_work_sync(&hyp_clock->work); - hyp_clock->running = false; + return; } ktime_get_snapshot_id(CLOCK_BOOTTIME, &snap); @@ -128,7 +123,6 @@ static void hyp_trace_clock_enable(struct hyp_trace_clock *hyp_clock, bool enabl INIT_DELAYED_WORK(&hyp_clock->work, __hyp_clock_work); schedule_delayed_work(&hyp_clock->work, msecs_to_jiffies(CLOCK_INIT_MS)); wait_for_completion(&hyp_clock->ready); - hyp_clock->running = true; } /* Access to this struct within the trace_remote_callbacks are protected by the trace_remote lock */ @@ -304,9 +298,15 @@ static void hyp_trace_unload(struct trace_buffer_desc *desc, void *priv) static int hyp_trace_enable_tracing(bool enable, void *priv) { + int ret; + hyp_trace_clock_enable(&hyp_clock, enable); - return kvm_call_hyp_nvhe(__tracing_enable, enable); + ret = kvm_call_hyp_nvhe(__tracing_enable, enable); + if (ret) + hyp_trace_clock_enable(&hyp_clock, !enable); + + return ret; } static int hyp_trace_swap_reader_page(unsigned int cpu, void *priv) -- cgit v1.2.3 From df7a9d376f7a388ecfacf8dfe0b5819ddfba6972 Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Fri, 10 Jul 2026 12:48:18 +0100 Subject: KVM: arm64: Fix potential leak in hyp_trace_buffer_alloc_bpages_backing In the very unlikely event of a failure in __map_hyp, the allocated backing pages are leaked in hyp_trace_buffer_alloc_bpages_backing(). Fix this by freeing the pages on error. Fixes: 3aed038aac8d ("KVM: arm64: Add trace remote for the nVHE/pKVM hyp") Reported-by: Sashiko Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Signed-off-by: Vincent Donnefort Link: https://patch.msgid.link/20260710114819.2689386-2-vdonnefort@google.com Signed-off-by: Marc Zyngier --- arch/arm64/kvm/hyp_trace.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/hyp_trace.c b/arch/arm64/kvm/hyp_trace.c index 9bfa368dd841..aabf2989d70d 100644 --- a/arch/arm64/kvm/hyp_trace.c +++ b/arch/arm64/kvm/hyp_trace.c @@ -154,6 +154,7 @@ static int hyp_trace_buffer_alloc_bpages_backing(struct hyp_trace_buffer *trace_ int nr_bpages = (PAGE_ALIGN(size) / PAGE_SIZE) + 1; size_t backing_size; void *start; + int ret; backing_size = PAGE_ALIGN(sizeof(struct simple_buffer_page) * nr_bpages * num_possible_cpus()); @@ -162,10 +163,16 @@ static int hyp_trace_buffer_alloc_bpages_backing(struct hyp_trace_buffer *trace_ if (!start) return -ENOMEM; + ret = __map_hyp(start, backing_size); + if (ret) { + free_pages_exact(start, backing_size); + return ret; + } + trace_buffer->desc->bpages_backing_start = (unsigned long)start; trace_buffer->desc->bpages_backing_size = backing_size; - return __map_hyp(start, backing_size); + return ret; } static void hyp_trace_buffer_free_bpages_backing(struct hyp_trace_buffer *trace_buffer) -- cgit v1.2.3 From ca28278d10ec234592989ad370d58294b9d43e0f Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Fri, 10 Jul 2026 12:48:19 +0100 Subject: KVM: arm64: Fix hyp_trace_desc allocation size in hyp_trace_load() The footprint calculated for struct hyp_trace_desc sizes only trace_buffer_desc and do not take into account the other fields. It worked so far thanks to the follow-up PAGE_ALIGN(). Fix the descriptor size and while at it, enforce an overflow check after PAGE_ALIGN(). Reported-by: Sashiko Fixes: 3aed038aac8d ("KVM: arm64: Add trace remote for the nVHE/pKVM hyp") Signed-off-by: Vincent Donnefort Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://patch.msgid.link/20260710114819.2689386-3-vdonnefort@google.com Signed-off-by: Marc Zyngier --- arch/arm64/kvm/hyp_trace.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kvm/hyp_trace.c b/arch/arm64/kvm/hyp_trace.c index aabf2989d70d..1adfdc800187 100644 --- a/arch/arm64/kvm/hyp_trace.c +++ b/arch/arm64/kvm/hyp_trace.c @@ -229,18 +229,22 @@ static int hyp_trace_buffer_share_hyp(struct hyp_trace_buffer *trace_buffer) static struct trace_buffer_desc *hyp_trace_load(unsigned long size, void *priv) { struct hyp_trace_buffer *trace_buffer = priv; + size_t desc_size, tb_desc_size; struct hyp_trace_desc *desc; - size_t desc_size; int ret; if (WARN_ON(trace_buffer->desc)) return ERR_PTR(-EINVAL); - desc_size = trace_buffer_desc_size(size, num_possible_cpus()); + tb_desc_size = trace_buffer_desc_size(size, num_possible_cpus()); + desc_size = size_add(tb_desc_size, offsetof(struct hyp_trace_desc, trace_buffer_desc)); if (desc_size == SIZE_MAX) return ERR_PTR(-E2BIG); desc_size = PAGE_ALIGN(desc_size); + if (!desc_size) + return ERR_PTR(-E2BIG); + desc = (struct hyp_trace_desc *)alloc_pages_exact(desc_size, GFP_KERNEL); if (!desc) return ERR_PTR(-ENOMEM); @@ -256,7 +260,7 @@ static struct trace_buffer_desc *hyp_trace_load(unsigned long size, void *priv) if (ret) goto err_free_desc; - ret = trace_remote_alloc_buffer(&desc->trace_buffer_desc, desc_size, size, + ret = trace_remote_alloc_buffer(&desc->trace_buffer_desc, tb_desc_size, size, cpu_possible_mask); if (ret) goto err_free_backing; -- cgit v1.2.3 From e7821048e8d72a94b1fb7422f8b45aa374ff076f Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Wed, 17 Jun 2026 10:52:38 +0100 Subject: KVM: arm64: Add missing hyp_enter when trapping sysreg Add a missing hypervisor event call for hyp_enter on sysreg trapping, causing an unbalanced hyp_enter/hyp_exit. The enum hyp_enter_exit_reason is not ABI, so we can keep the ERET reasons at the end for clarity. Fixes: 696dfec22b8e ("KVM: arm64: Add hyp_enter/hyp_exit events to nVHE/pKVM hyp") Signed-off-by: Vincent Donnefort Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://patch.msgid.link/20260617095238.1530121-1-vdonnefort@google.com Signed-off-by: Marc Zyngier --- arch/arm64/include/asm/kvm_hypevents.h | 1 + arch/arm64/kvm/hyp/nvhe/hyp-main.c | 1 + arch/arm64/kvm/hyp_trace.c | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/arm64/include/asm/kvm_hypevents.h b/arch/arm64/include/asm/kvm_hypevents.h index 743c49bd878f..5f6e6789d121 100644 --- a/arch/arm64/include/asm/kvm_hypevents.h +++ b/arch/arm64/include/asm/kvm_hypevents.h @@ -12,6 +12,7 @@ enum hyp_enter_exit_reason { HYP_REASON_SMC, HYP_REASON_HVC, + HYP_REASON_SYS, HYP_REASON_PSCI, HYP_REASON_HOST_ABORT, HYP_REASON_GUEST_EXIT, diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c index d3c69de698f4..d3df96ed8ba4 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c +++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c @@ -932,6 +932,7 @@ void handle_trap(struct kvm_cpu_context *host_ctxt) handle_host_mem_abort(host_ctxt); break; case ESR_ELx_EC_SYS64: + trace_hyp_enter(host_ctxt, HYP_REASON_SYS); if (handle_host_mte(esr)) break; fallthrough; diff --git a/arch/arm64/kvm/hyp_trace.c b/arch/arm64/kvm/hyp_trace.c index 1adfdc800187..9644c424819b 100644 --- a/arch/arm64/kvm/hyp_trace.c +++ b/arch/arm64/kvm/hyp_trace.c @@ -409,6 +409,7 @@ static const char *__hyp_enter_exit_reason_str(u8 reason) static const char strs[][12] = { "smc", "hvc", + "sys", "psci", "host_abort", "guest_exit", -- cgit v1.2.3 From 679d7201c1f09e37fa1c12ce28d84079c17fc87f Mon Sep 17 00:00:00 2001 From: Alexandru Elisei Date: Wed, 22 Jul 2026 10:03:54 +0100 Subject: KVM: arm64: Reject guest_memfd memslots when the VM has MTE The user cannot use MTE on VMAs created by mapping a guest_memfd file, as arch_calc_vm_flag_bits() does not set VM_MTE_ALLOWED. When creating a guest_memfd backed memslot, kvm_arch_prepare_memory_region() rejects the memslot if MTE is enabled for the VM and if guest_memfd has been mapped in a VMA that intersects the memslot. However, the documentation for KVM_SET_USER_MEMORY_REGION2 explicitly states that the only condition for userspace_addr is for it to be a legal userspace address, but the mapping is not required to be valid nor populated at memslot creation. If userspace sets userspace_addr to an address that hasn't been mapped, or if userspace_addr belongs to a VMA that isn't backed by the guest_memfd file, or if the VMA doesn't intersect the memslot, memslot creation is successful and KVM ends up with a VM with MTE and guest_memfd-backed memslots. The same happens if the order is reversed: when userspace enables MTE, KVM does not check if memslots backed by guest_memfd are already present. Fix both issues by rejecting guest_memfd-backed memslots when MTE is enabled, and by rejecting MTE when guest_memfd-backed memslots are already present. Fixes: 32e200bd6e44 ("KVM: arm64: Enable support for guest_memfd backed memory") Tested-by: Fuad Tabba Reviewed-by: Fuad Tabba Signed-off-by: Alexandru Elisei Link: https://patch.msgid.link/20260722090354.94245-1-alexandru.elisei@arm.com Signed-off-by: Marc Zyngier --- Documentation/virt/kvm/api.rst | 6 ++++++ arch/arm64/kvm/arm.c | 25 +++++++++++++++++++------ arch/arm64/kvm/mmu.c | 4 ++++ 3 files changed, 29 insertions(+), 6 deletions(-) diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index a5f9ee92f43e..e3003a241d5b 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -8414,6 +8414,12 @@ When this capability is enabled all memory in memslots must be mapped as attempts to create a memslot with an invalid mmap will result in an -EINVAL return. +``guest_memfd``, even though it is an anonymous file, is not supported with MTE. +Attempting to create a memslot backed by ``guest_memfd`` when the MTE capability +is enabled, or attempting to enable the MTE capability after +``guest_memfd``-backed memslots have been created, will result in an -EINVAL +return. + When enabled the VMM may make use of the ``KVM_ARM_MTE_COPY_TAGS`` ioctl to perform a bulk copy of tags to/from the guest. diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 50adfff75be8..9a6c72a18672 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -149,14 +149,27 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, set_bit(KVM_ARCH_FLAG_RETURN_NISV_IO_ABORT_TO_USER, &kvm->arch.flags); break; - case KVM_CAP_ARM_MTE: - mutex_lock(&kvm->lock); - if (system_supports_mte() && !kvm->created_vcpus) { - r = 0; - set_bit(KVM_ARCH_FLAG_MTE_ENABLED, &kvm->arch.flags); + case KVM_CAP_ARM_MTE: { + struct kvm_memory_slot *memslot; + int bkt; + + guard(mutex)(&kvm->lock); + if (!system_supports_mte() || kvm->created_vcpus) + break; + + r = 0; + guard(mutex)(&kvm->slots_lock); + kvm_for_each_memslot(memslot, bkt, kvm_memslots(kvm)) { + if (kvm_slot_has_gmem(memslot)) { + r = -EINVAL; + break; + } } - mutex_unlock(&kvm->lock); + if (r == 0) + set_bit(KVM_ARCH_FLAG_MTE_ENABLED, &kvm->arch.flags); break; + + } case KVM_CAP_ARM_SYSTEM_SUSPEND: r = 0; set_bit(KVM_ARCH_FLAG_SYSTEM_SUSPEND_ENABLED, &kvm->arch.flags); diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 6c941aaa10c6..2d95203386ba 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -2652,6 +2652,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, if (kvm_slot_has_gmem(new) && !kvm_memslot_is_gmem_only(new)) return -EINVAL; + /* guest_memfd is incompatible with MTE. */ + if (kvm_slot_has_gmem(new) && kvm_has_mte(kvm)) + return -EINVAL; + hva = new->userspace_addr; reg_end = hva + (new->npages << PAGE_SHIFT); -- cgit v1.2.3 From a9df7939a2c5e3794769fde809ea892e5a414b93 Mon Sep 17 00:00:00 2001 From: Jorn Baayen Date: Tue, 21 Jul 2026 17:19:23 +0200 Subject: ASoC: amd: yc: Add DMI quirk for Acer Aspire AG14-22P The Acer Aspire AG14-22P has its internal microphone connected to the ACP as a digital microphone, but the BIOS does not advertise it via the AcpDmicConnected ACPI property, so the internal microphone does not work out of the box. Add a DMI quirk to enable it. Tested on an Aspire AG14-22P (board Dove2_MDU, BIOS V1.03): the acp6x DMIC card is created and the internal microphone captures audio. Assisted-by: Claude-Code:claude-fable-5 Signed-off-by: Jorn Baayen Link: https://patch.msgid.link/20260721151924.30316-1-jhbaayen@fastmail.com Signed-off-by: Mark Brown --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 0d93e45b6178..de5c895e9fbd 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -45,6 +45,13 @@ static struct snd_soc_card acp6x_card = { }; static const struct dmi_system_id yc_acp_quirk_table[] = { + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire AG14-22P"), + } + }, { .driver_data = &acp6x_card, .matches = { -- cgit v1.2.3 From 160a783aa65b74782bc17cb874af1a6d3f5fba3c Mon Sep 17 00:00:00 2001 From: Xu Rao Date: Thu, 23 Jul 2026 14:54:44 +0800 Subject: power: supply: bq25890: fix the -10 C NTC lookup entry The TSPCT lookup table is monotonically decreasing except for ADC code 121, where the sequence reads -9.0 C, -1.0 C, -12.0 C. This makes the reported battery temperature jump upward by eight degrees for one code and then downward by eleven degrees for the next code. The entry is a missing zero: use -10.0 C so the sequence remains monotonic between -9.0 C and -12.0 C. Fixes: 9652c02428f3 ("power: bq25890: add POWER_SUPPLY_PROP_TEMP") Cc: stable@vger.kernel.org Signed-off-by: Xu Rao Link: https://patch.msgid.link/0619C8BF15F43B7C+20260723065444.1796002-1-raoxu@uniontech.com Signed-off-by: Sebastian Reichel --- drivers/power/supply/bq25890_charger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index c1c12a447178..180bc137a863 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -320,7 +320,7 @@ static const u32 bq25890_tspct_tbl[] = { 145, 140, 130, 120, 115, 110, 100, 90, 80, 70, 60, 50, 40, 30, 20, 10, 0, -10, -20, -30, -40, -60, -70, -80, - -90, -10, -120, -140, -150, -170, -190, -210, + -90, -100, -120, -140, -150, -170, -190, -210, }; #define BQ25890_TSPCT_TBL_SIZE ARRAY_SIZE(bq25890_tspct_tbl) -- cgit v1.2.3 From 35d661c98fe4733490f20b4311616a3c2c30abc0 Mon Sep 17 00:00:00 2001 From: Fabrice Derepas Date: Wed, 22 Jul 2026 19:22:30 +0300 Subject: KEYS: trusted: dcp: fix key_len validation and calc_blob_len() return type Two correctness and type-hygiene issues exist in the DCP trusted keys implementation. First, trusted_dcp_unseal() reads p->key_len from a user-supplied blob without checking if it exceeds MAX_KEY_SIZE. If a crafted blob provides a payload_len larger than 128, the subsequent do_aead_crypto() call writes past the end of the p->key array into the adjacent p->blob buffer within the same struct trusted_key_payload -- the caller's own input, not unrelated kernel memory. While not exploitable, this violates strict array bounds and triggers static analyzers. Fix this by adding a validation check against MIN_KEY_SIZE and MAX_KEY_SIZE immediately after reading the length, matching the checks already done in trusted_core.c. Second, calc_blob_len() calculates a sum in size_t that truncates to unsigned int on 64-bit platforms. Because the DCP hardware is only present on 32-bit i.MX SoC platforms, size_t and unsigned int are functionally equivalent in production, making this truncation harmless in practice. Nevertheless, updating the return type to size_t (and subsequently updating 'blen' in the seal/unseal paths) resolves type-narrowing warnings and improves overall code hygiene. Fixes: 2e8a0f40a39c ("KEYS: trusted: Introduce NXP DCP-backed trusted keys") Signed-off-by: Fabrice Derepas Reviewed-by: David Gstir Reviewed-by: Richard Weinberger Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20260719163939.3624767-1-fabrice.derepas@canonical.com Signed-off-by: Jarkko Sakkinen --- security/keys/trusted-keys/trusted_dcp.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/security/keys/trusted-keys/trusted_dcp.c b/security/keys/trusted-keys/trusted_dcp.c index 7b6eb655df0c..c078adebe190 100644 --- a/security/keys/trusted-keys/trusted_dcp.c +++ b/security/keys/trusted-keys/trusted_dcp.c @@ -69,7 +69,7 @@ static bool skip_zk_test; module_param_named(dcp_skip_zk_test, skip_zk_test, bool, 0); MODULE_PARM_DESC(dcp_skip_zk_test, "Don't test whether device keys are zero'ed"); -static unsigned int calc_blob_len(unsigned int payload_len) +static size_t calc_blob_len(unsigned int payload_len) { return sizeof(struct dcp_blob_fmt) + payload_len + DCP_BLOB_AUTHLEN; } @@ -200,7 +200,8 @@ static int encrypt_blob_key(u8 *plain_key, u8 *encrypted_key) static int trusted_dcp_seal(struct trusted_key_payload *p, char *datablob) { struct dcp_blob_fmt *b = (struct dcp_blob_fmt *)p->blob; - int blen, ret; + size_t blen; + int ret; u8 *plain_blob_key; blen = calc_blob_len(p->key_len); @@ -242,7 +243,8 @@ out: static int trusted_dcp_unseal(struct trusted_key_payload *p, char *datablob) { struct dcp_blob_fmt *b = (struct dcp_blob_fmt *)p->blob; - int blen, ret; + size_t blen; + int ret; u8 *plain_blob_key = NULL; if (b->fmt_version != DCP_BLOB_VERSION) { @@ -253,9 +255,14 @@ static int trusted_dcp_unseal(struct trusted_key_payload *p, char *datablob) } p->key_len = le32_to_cpu(b->payload_len); + if (p->key_len < MIN_KEY_SIZE || p->key_len > MAX_KEY_SIZE) { + ret = -EINVAL; + goto out; + } + blen = calc_blob_len(p->key_len); if (blen != p->blob_len) { - pr_err("DCP blob has bad length: %i != %i\n", blen, + pr_err("DCP blob has bad length: %zu != %u\n", blen, p->blob_len); ret = -EINVAL; goto out; -- cgit v1.2.3 From 63918731f9ae25b5deb022f118e941e6dddfcef4 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Sun, 19 Jul 2026 12:15:03 -0400 Subject: keys: fix out-of-bounds read in keyring_get_key_chunk() For description-level chunks keyring_get_key_chunk() advances the read pointer by level * sizeof(long) past the inline prefix but only bounds-checks the prefix, so a long enough key description is read past its kmemdup(desc, desc_len + 1) allocation. Compute the full byte offset and bounds-check the description against it before reading. The walk only reaches a description-level chunk when two keys collide through the hash, x, type and domain_tag chunks, so this is reached from an unprivileged add_key(2) with a crafted pair of same-type keys whose index hashes collide; KASAN reports a slab-out-of-bounds read. Fixes: f771fde82051 ("keys: Simplify key description management") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20260719161505.2423935-2-michael.bommarito@gmail.com Signed-off-by: Jarkko Sakkinen --- security/keys/keyring.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/security/keys/keyring.c b/security/keys/keyring.c index 7a2ee0ded7c9..085f7a743354 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -271,6 +271,7 @@ static unsigned long keyring_get_key_chunk(const void *data, int level) unsigned long chunk = 0; const u8 *d; int desc_len = index_key->desc_len, n = sizeof(chunk); + unsigned int offset; level /= ASSOC_ARRAY_KEY_CHUNK_SIZE; switch (level) { @@ -284,12 +285,12 @@ static unsigned long keyring_get_key_chunk(const void *data, int level) return (unsigned long)index_key->domain_tag; default: level -= 4; - if (desc_len <= sizeof(index_key->desc)) + offset = sizeof(index_key->desc) + level * sizeof(long); + if (desc_len <= offset) return 0; - d = index_key->description + sizeof(index_key->desc); - d += level * sizeof(long); - desc_len -= sizeof(index_key->desc); + d = index_key->description + offset; + desc_len -= offset; if (desc_len > n) desc_len = n; do { -- cgit v1.2.3 From 58565eef0f8d861aae92abfb7658458d661cee17 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Sun, 19 Jul 2026 12:15:04 -0400 Subject: keys: make keyring key-chunk byte order agree with keyring_diff_objects() keyring_get_key_chunk() loads description bytes into the index chunk low address first, while keyring_diff_objects() numbers the first differing bit from the low end and folds the absolute byte index into the level without removing the inline-prefix offset the level already carries. The two disagree on byte order and bit position, so the array can be told two keys first differ at a bit that does not differ in the chunk the walker uses, letting crafted descriptions collide into one node. Load the chunk in the order keyring_diff_objects() assumes and drop the inline-prefix length when folding the byte index into the level. This only changes the in-memory ordering used to place keys within a keyring; add, search and read of non-colliding keys are unaffected. Fixes: f771fde82051 ("keys: Simplify key description management") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20260719161505.2423935-3-michael.bommarito@gmail.com Signed-off-by: Jarkko Sakkinen --- security/keys/keyring.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/security/keys/keyring.c b/security/keys/keyring.c index 085f7a743354..15bf4af8f282 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -293,9 +293,10 @@ static unsigned long keyring_get_key_chunk(const void *data, int level) desc_len -= offset; if (desc_len > n) desc_len = n; + d += desc_len; do { chunk <<= 8; - chunk |= *d++; + chunk |= *--d; } while (--desc_len > 0); return chunk; } @@ -376,7 +377,7 @@ same: return -1; differ_plus_i: - level += i; + level += i - (int)sizeof(a->desc); differ: i = level * 8 + __ffs(seg_a ^ seg_b); return i; -- cgit v1.2.3 From a82c8a05e86f3f84e09698f65b4515b5d04633f6 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Sun, 19 Jul 2026 12:15:05 -0400 Subject: assoc_array: trim the final shortcut word using the current chunk end assoc_array_walk() masks off the bits past shortcut->skip_to_level in the word that contains skip_to_level, gated on round_up(sc_level, ASSOC_ARRAY_KEY_CHUNK_SIZE) > skip_to_level. That guard is wrong in two opposite ways: - When sc_level is word-aligned (every word after the first) round_up() is a no-op, so the guard is sc_level > skip_to_level and never fires for the word that holds skip_to_level. A shortcut that spans more than one word and ends in the middle of its last word leaves that word untrimmed, and its stale high bits leak into the dissimilarity word and can steer the walk down the wrong descendant. - When sc_level is unaligned (the first word) and skip_to_level sits on the next chunk boundary, sc_level + CHUNK would exceed skip_to_level and fire the trim with shift = skip_to_level & CHUNK_MASK == 0, which clears the whole dissimilarity word and makes a differing shortcut compare equal. Use the end of the chunk that contains sc_level instead: skip_to_level < round_down(sc_level, CHUNK) + CHUNK For an aligned sc_level whose word holds skip_to_level this now fires (the first bug); for an unaligned sc_level with skip_to_level on the following boundary it does not, so shift is never 0 when the branch runs and the trim never clears the whole word. Fixes: 3cb989501c26 ("Add a generic associative array implementation.") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20260719161505.2423935-4-michael.bommarito@gmail.com Signed-off-by: Jarkko Sakkinen --- lib/assoc_array.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/lib/assoc_array.c b/lib/assoc_array.c index bcc6e0a013eb..b6c9723e12ce 100644 --- a/lib/assoc_array.c +++ b/lib/assoc_array.c @@ -255,7 +255,8 @@ follow_shortcut: sc_segments = shortcut->index_key[sc_level >> ASSOC_ARRAY_KEY_CHUNK_SHIFT]; dissimilarity = segments ^ sc_segments; - if (round_up(sc_level, ASSOC_ARRAY_KEY_CHUNK_SIZE) > shortcut->skip_to_level) { + if (shortcut->skip_to_level < round_down(sc_level, + ASSOC_ARRAY_KEY_CHUNK_SIZE) + ASSOC_ARRAY_KEY_CHUNK_SIZE) { /* Trim segments that are beyond the shortcut */ int shift = shortcut->skip_to_level & ASSOC_ARRAY_KEY_CHUNK_MASK; dissimilarity &= ~(ULONG_MAX << shift); -- cgit v1.2.3 From f30415929be8aeb002d557c8d3f7ab2d2188003a Mon Sep 17 00:00:00 2001 From: David Lee Date: Mon, 13 Jul 2026 09:59:15 +0000 Subject: netfilter: ipset: do not update comments from kernel-side hash adds mtype_resize() copies comment pointers with memcpy(), not the comment objects themselves. During the window after an entry has been copied but before the table swap and backlog replay, the old table is still published for packet-side updates while the replacement-table entry already holds the same ip_set_comment_rcu pointer. If xt_SET --add-set ... --exist hits that old entry in this window, mtype_add() calls ip_set_init_comment() even though packet-side adds carry no comment payload. That call frees the shared comment through the old entry, so the replacement-table entry now holds a stale pointer. When the queued add is replayed on the new table, mtype_add() calls ip_set_init_comment() again and strlen() dereferences the stale pointer. Fix this in mtype_add() by skipping ip_set_init_comment() when ext->target marks a packet-side add. Userspace adds still update comments, while packet-side adds can no longer free comment storage shared with a resize copy. Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports") Cc: stable@vger.kernel.org Signed-off-by: David Lee Assisted-by: Codex:gpt-5.5 Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_hash_gen.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h index 8231317b0f1f..b2d77973272d 100644 --- a/net/netfilter/ipset/ip_set_hash_gen.h +++ b/net/netfilter/ipset/ip_set_hash_gen.h @@ -1005,7 +1005,7 @@ overwrite_extensions: #endif if (SET_WITH_COUNTER(set)) ip_set_init_counter(ext_counter(data, set), ext); - if (SET_WITH_COMMENT(set)) + if (SET_WITH_COMMENT(set) && !ext->target) ip_set_init_comment(set, ext_comment(data, set), ext); if (SET_WITH_SKBINFO(set)) ip_set_init_skbinfo(ext_skbinfo(data, set), ext); -- cgit v1.2.3 From a63d2dbaeb50a85d4c976b15a36e6b0c7113db5b Mon Sep 17 00:00:00 2001 From: Zhiling Zou Date: Mon, 13 Jul 2026 19:52:32 +0800 Subject: ipvs: do not propagate one-packet flag to synced conns Synced connections can be created before their destination exists. When the destination is later added, ip_vs_bind_dest() copies connection flags from the destination into cp->flags. IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed, expiry can treat it as a one-packet connection and skip unlinking the existing conn_tab node, leaving stale hash nodes pointing at a freed struct ip_vs_conn. Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced connections. Fixes: 26ec037f9841 ("IPVS: one-packet scheduling") Cc: stable@vger.kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Suggested-by: Julian Anastasov Signed-off-by: Zhiling Zou Signed-off-by: Ren Wei Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_conn.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index 6ed2622363f0..0682cec5f0a7 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -1014,6 +1014,9 @@ ip_vs_bind_dest(struct ip_vs_conn *cp, struct ip_vs_dest *dest) flags = cp->flags; /* Bind with the destination and its corresponding transmitter */ if (flags & IP_VS_CONN_F_SYNC) { + /* Synced conns are hashed, so they can not get this flag */ + conn_flags &= ~IP_VS_CONN_F_ONE_PACKET; + /* if the connection is not template and is created * by sync, preserve the activity flag. */ -- cgit v1.2.3 From 712d2993bea555f1f09cd53cbdb25714f28e85db Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Mon, 13 Jul 2026 19:52:33 +0800 Subject: ipvs: adjust double hashing when fwd method changes Synced conns can be created with one forwarding method and later updated with different one after the dest server is configured. This needs adjusting the hashing for node hn1 because only MASQ supports double hashing. Modify conn_tab_lock() to support seeking for hash node hn0 together with adding for hn1. By this way we can safely modify the forwarding method and hn1.hash_key under bucket lock for the first node hn0. The forwarding method is also protected by cp->lock as it is part of cp->flags. Fix the usage of stale idx/idx2 values in conn_tab_lock after jumping to the retry label. Instead, use idx/idx2 values just to order the locking for the old/new tables. Reported-by: Zhiling Zou Link: https://patch.msgid.link/1b914f41d725bc064c9ba9830dc8169329737270.1782540466.git.roxy520tt@gmail.com/ Link: https://sashiko.dev/#/patchset/CALMqdkR704S2BG_QD_bgHTFp2%2B1QCi7n0T4zoZyTo8mDZevYSA%40mail.gmail.com Fixes: f20c73b0460d ("ipvs: use more keys for connection hashing") Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_conn.c | 189 +++++++++++++++++++++++++++++++--------- 1 file changed, 147 insertions(+), 42 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index 0682cec5f0a7..36c5cba03f5b 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -70,25 +70,45 @@ static struct kmem_cache *ip_vs_conn_cachep __read_mostly; * bucket or hash table * - hash table resize works like rehash but always rehashes into new table * - bit lock on bucket serializes all operations that modify the chain + * - on resize, bucket from the old table is locked before bucket from the + * new table * - cp->lock protects conn fields like cp->flags, cp->dest */ -/* Lock conn_tab bucket for conn hash/unhash, not for rehash */ +/** + * conn_tab_lock - Lock conn_tab buckets for conn hash/unhash, not for rehash + * @t: hash table for hn0, new_tbl when new_hash=true + * @t2: hash table for hn1, new_tbl when new_hash2=true + * @cp: connection + * @hash_key: hash key for hn0 + * @hash_key2: hash key for hn1 + * @use2: using hn1 (double hashing) based on the forwarding method + * @new_hash: mode for hn0, hash node (true) or seek node (false) + * @new_hash2: mode for hn1, hash node (true) or seek node (false) + * @head_ret: returned head for hn0 + * @head2_ret: returned head for hn1 + * + * We support 3 modes: + * - seek mode for both nodes, used for unhashing + * - hash mode for both nodes, used for hashing + * - seek hn0 and hash hn1, used when forwarding method is changed + */ static __always_inline void -conn_tab_lock(struct ip_vs_rht *t, struct ip_vs_conn *cp, u32 hash_key, - u32 hash_key2, bool use2, bool new_hash, - struct hlist_bl_head **head_ret, struct hlist_bl_head **head2_ret) +conn_tab_lock(struct ip_vs_rht *t, struct ip_vs_rht *t2, struct ip_vs_conn *cp, + u32 hash_key, u32 hash_key2, bool use2, bool new_hash, + bool new_hash2, struct hlist_bl_head **head_ret, + struct hlist_bl_head **head2_ret) { struct hlist_bl_head *head, *head2; u32 hash_key_new, hash_key_new2; - struct ip_vs_rht *t2 = t; - u32 idx, idx2; + int idx = 0, idx2 = 0; + + /* Advance idx2 when new_hash is not set but hash_key2 + * is for new table + */ + if (new_hash2 && use2 && t != t2) + idx2++; - idx = hash_key & t->mask; - if (use2) - idx2 = hash_key2 & t->mask; - else - idx2 = idx; if (!new_hash) { /* We need to lock the bucket in the right table */ @@ -100,46 +120,45 @@ retry: * both nodes in different tables, use idx/idx2 * for proper lock ordering for heads. */ - idx = hash_key & t->mask; - idx |= IP_VS_RHT_TABLE_ID_MASK; - } - if (use2) { - if (!ip_vs_rht_same_table(t2, hash_key2)) { - /* It is already moved to new table */ - t2 = rcu_dereference(t2->new_tbl); - idx2 = hash_key2 & t2->mask; - idx2 |= IP_VS_RHT_TABLE_ID_MASK; - } - } else { - idx2 = idx; + idx++; } } + if (use2 && !new_hash2 && !ip_vs_rht_same_table(t2, hash_key2)) { + /* It is already moved to new table */ + t2 = rcu_dereference(t2->new_tbl); + idx2++; + } + if (!use2) + idx2 = idx; head = t->buckets + (hash_key & t->mask); head2 = use2 ? t2->buckets + (hash_key2 & t2->mask) : head; - local_bh_disable(); - /* Do not touch seqcount, this is a safe operation */ - - if (idx <= idx2) { + if (idx > idx2 || (head > head2 && idx == idx2)) { + hlist_bl_lock(head2); hlist_bl_lock(head); - if (head != head2) - hlist_bl_lock(head2); } else { - hlist_bl_lock(head2); hlist_bl_lock(head); + if (head != head2) + hlist_bl_lock(head2); } if (!new_hash) { + bool changed; + /* Ensure hash_key is read under lock */ hash_key_new = READ_ONCE(cp->hn0.hash_key); - hash_key_new2 = READ_ONCE(cp->hn1.hash_key); + changed = hash_key != hash_key_new; + if (use2 && !new_hash2) { + hash_key_new2 = READ_ONCE(cp->hn1.hash_key); + changed |= hash_key2 != hash_key_new2; + } else { + hash_key_new2 = hash_key2; + } /* Hash changed ? */ - if (hash_key != hash_key_new || - (hash_key2 != hash_key_new2 && use2)) { + if (changed) { if (head != head2) hlist_bl_unlock(head2); hlist_bl_unlock(head); - local_bh_enable(); hash_key = hash_key_new; hash_key2 = hash_key_new2; goto retry; @@ -155,7 +174,6 @@ static inline void conn_tab_unlock(struct hlist_bl_head *head, if (head != head2) hlist_bl_unlock(head2); hlist_bl_unlock(head); - local_bh_enable(); } static void ip_vs_conn_expire(struct timer_list *t); @@ -268,8 +286,9 @@ static inline int ip_vs_conn_hash(struct ip_vs_conn *cp) use2 = false; } - conn_tab_lock(t, cp, hash_key, hash_key2, use2, true /* new_hash */, - &head, &head2); + local_bh_disable(); + conn_tab_lock(t, t, cp, hash_key, hash_key2, use2, true /* new_hash */, + true /* new_hash2 */, &head, &head2); cp->flags |= IP_VS_CONN_F_HASHED; WRITE_ONCE(cp->hn0.hash_key, hash_key); @@ -280,6 +299,7 @@ static inline int ip_vs_conn_hash(struct ip_vs_conn *cp) hlist_bl_add_head_rcu(&cp->hn1.node, head2); conn_tab_unlock(head, head2); + local_bh_enable(); ret = 1; /* Schedule resizing if load increases */ @@ -306,18 +326,20 @@ static inline bool ip_vs_conn_unlink(struct ip_vs_conn *cp) return refcount_dec_if_one(&cp->refcnt); rcu_read_lock(); + local_bh_disable(); t = rcu_dereference(ipvs->conn_tab); hash_key = READ_ONCE(cp->hn0.hash_key); hash_key2 = READ_ONCE(cp->hn1.hash_key); use2 = ip_vs_conn_use_hash2(cp); - conn_tab_lock(t, cp, hash_key, hash_key2, use2, false /* new_hash */, - &head, &head2); + conn_tab_lock(t, t, cp, hash_key, hash_key2, use2, false /* new_hash */, + false /* new_hash2 */, &head, &head2); if (cp->flags & IP_VS_CONN_F_HASHED) { /* Decrease refcnt and unlink conn only if we are last user */ - if (refcount_dec_if_one(&cp->refcnt)) { + if (use2 == ip_vs_conn_use_hash2(cp) && + refcount_dec_if_one(&cp->refcnt)) { hlist_bl_del_rcu(&cp->hn0.node); if (use2) hlist_bl_del_rcu(&cp->hn1.node); @@ -328,6 +350,7 @@ static inline bool ip_vs_conn_unlink(struct ip_vs_conn *cp) conn_tab_unlock(head, head2); + local_bh_enable(); rcu_read_unlock(); return ret; @@ -632,6 +655,7 @@ void ip_vs_conn_fill_cport(struct ip_vs_conn *cp, __be16 cport) int ntbl; int dir; +restart: /* No packets from inside, so we can do it in 2 steps. */ dir = use2 ? 1 : 0; @@ -686,6 +710,23 @@ retry: /* Protect the cp->flags modification */ spin_lock_bh(&cp->lock); + /* Recheck the forwarding method under lock */ + if (use2 != ip_vs_conn_use_hash2(cp)) { + use2 = !use2; + if (use2) { + spin_unlock_bh(&cp->lock); + /* Restart with new use2 value */ + goto restart; + } + if (dir) { + /* Not started yet, so just skip dir 1 */ + spin_unlock_bh(&cp->lock); + dir--; + goto next_dir; + } + /* Just finish dir 0 */ + } + /* Lock seqcount only for the old bucket, even if we are on new table * because it affects the del operation, not the adding. */ @@ -752,6 +793,61 @@ retry: goto next_dir; } +/* Change forwarding method for hashed conn */ +static void ip_vs_conn_change_fwd_mask(struct ip_vs_conn *cp, u32 new_flags) +{ + struct netns_ipvs *ipvs = cp->ipvs; + struct hlist_bl_head *head, *head2; + u32 hash2, hash_key, hash_key2; + struct ip_vs_rht *t, *t2; + + /* See ip_vs_conn_use_hash2() for reference */ + if ((cp->flags & IP_VS_CONN_F_TEMPLATE) || + /* No change in double hashing ? */ + (IP_VS_FWD_METHOD(cp) == IP_VS_CONN_F_MASQ) == + ((new_flags & IP_VS_CONN_F_FWD_MASK) == IP_VS_CONN_F_MASQ)) { + cp->flags = new_flags; + return; + } + t = rcu_dereference(ipvs->conn_tab); + if (ip_vs_conn_use_hash2(cp)) { + /* Stop double hashing */ + hash_key = READ_ONCE(cp->hn0.hash_key); + hash_key2 = READ_ONCE(cp->hn1.hash_key); + + conn_tab_lock(t, t, cp, hash_key, hash_key2, true /* use2 */, + false /* new_hash */, false /* new_hash2 */, + &head, &head2); + + /* Keep both hash keys in same table */ + hash_key = READ_ONCE(cp->hn0.hash_key); + WRITE_ONCE(cp->hn1.hash_key, hash_key); + hlist_bl_del_rcu(&cp->hn1.node); + cp->flags = new_flags; + + conn_tab_unlock(head, head2); + } else { + /* Start double hashing */ + + hash_key = READ_ONCE(cp->hn0.hash_key); + + t2 = rcu_dereference(t->new_tbl); + hash2 = ip_vs_conn_hashkey_conn(t2, cp, true); + hash_key2 = ip_vs_rht_build_hash_key(t2, hash2); + + /* Change the forwarding method under locked hn0 */ + conn_tab_lock(t, t2, cp, hash_key, hash_key2, true /* use2 */, + false /* new_hash */, true /* new_hash2 */, + &head, &head2); + + WRITE_ONCE(cp->hn1.hash_key, hash_key2); + cp->flags = new_flags; + hlist_bl_add_head_rcu(&cp->hn1.node, head2); + + conn_tab_unlock(head, head2); + } +} + /* Get default load factor to map conn_count/u_thresh to t->size */ static int ip_vs_conn_default_load_factor(struct netns_ipvs *ipvs) { @@ -1024,9 +1120,18 @@ ip_vs_bind_dest(struct ip_vs_conn *cp, struct ip_vs_dest *dest) conn_flags &= ~IP_VS_CONN_F_INACTIVE; /* connections inherit forwarding method from dest */ flags &= ~(IP_VS_CONN_F_FWD_MASK | IP_VS_CONN_F_NOOUTPUT); + flags |= conn_flags; + /* Changing forwarding method for hashed conn can + * happen only under locks + */ + if (cp->flags & IP_VS_CONN_F_HASHED) + ip_vs_conn_change_fwd_mask(cp, flags); + else + cp->flags = flags; + } else { + flags |= conn_flags; + cp->flags = flags; } - flags |= conn_flags; - cp->flags = flags; cp->dest = dest; IP_VS_DBG_BUF(7, "Bind-dest %s c:%s:%d v:%s:%d " -- cgit v1.2.3 From f4f699790590bd0896c48a71e9232a65198f92f0 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 16 Jul 2026 10:13:37 +0200 Subject: netfilter: nf_tables: make nft_object rhltable per table The nft_object rhltable is global, this allows for accessing objects that are being dismangled from lookup path by other existing netns. Given the nft_obj_destroy() releases the object inmediately, this might lead to use-after-free of these objects that are being released. Make the existing rhltable per table to address this issue to deal with with the nft_rcv_nl_event() path too. Update nft_obj_lookup() to take the table as non-const, otherwise, compiler complains when passing the objname_ht to rhltable_lookup(). Fixes: 4d44175aa5bb ("netfilter: nf_tables: handle nft_object lookups via rhltable") Suggested-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 4 +++- net/netfilter/nf_tables_api.c | 34 ++++++++++++++++------------------ 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 9d844354c4d9..3be612145c13 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -1294,6 +1294,7 @@ static inline void nft_use_inc_restore(u32 *use) * @sets: sets in the table * @objects: stateful objects in the table * @flowtables: flow tables in the table + * @objname_ht: hashtable for objects lookup by name * @hgenerator: handle generator state * @handle: table handle * @use: number of chain references to this table @@ -1313,6 +1314,7 @@ struct nft_table { struct list_head sets; struct list_head objects; struct list_head flowtables; + struct rhltable objname_ht; u64 hgenerator; u64 handle; u32 use; @@ -1400,7 +1402,7 @@ static inline void *nft_obj_data(const struct nft_object *obj) #define nft_expr_obj(expr) *((struct nft_object **)nft_expr_priv(expr)) struct nft_object *nft_obj_lookup(const struct net *net, - const struct nft_table *table, + struct nft_table *table, const struct nlattr *nla, u32 objtype, u8 genmask); diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index a9eaf9455c77..af357f6c5070 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -45,8 +45,6 @@ enum { NFT_VALIDATE_DO, }; -static struct rhltable nft_objname_ht; - static u32 nft_chain_hash(const void *data, u32 len, u32 seed); static u32 nft_chain_hash_obj(const void *data, u32 len, u32 seed); static int nft_chain_hash_cmp(struct rhashtable_compare_arg *, const void *); @@ -1635,6 +1633,10 @@ static int nf_tables_newtable(struct sk_buff *skb, const struct nfnl_info *info, if (err) goto err_chain_ht; + err = rhltable_init(&table->objname_ht, &nft_objname_ht_params); + if (err < 0) + goto err_obj_ht; + INIT_LIST_HEAD(&table->chains); INIT_LIST_HEAD(&table->sets); INIT_LIST_HEAD(&table->objects); @@ -1653,6 +1655,8 @@ static int nf_tables_newtable(struct sk_buff *skb, const struct nfnl_info *info, list_add_tail_rcu(&table->list, &nft_net->tables); return 0; err_trans: + rhltable_destroy(&table->objname_ht); +err_obj_ht: rhltable_destroy(&table->chains_ht); err_chain_ht: kfree(table->udata); @@ -1819,6 +1823,7 @@ static void nf_tables_table_destroy(struct nft_table *table) return; rhltable_destroy(&table->chains_ht); + rhltable_destroy(&table->objname_ht); kfree(table->name); kfree(table->udata); kfree(table); @@ -8086,7 +8091,7 @@ void nft_unregister_obj(struct nft_object_type *obj_type) EXPORT_SYMBOL_GPL(nft_unregister_obj); struct nft_object *nft_obj_lookup(const struct net *net, - const struct nft_table *table, + struct nft_table *table, const struct nlattr *nla, u32 objtype, u8 genmask) { @@ -8102,7 +8107,7 @@ struct nft_object *nft_obj_lookup(const struct net *net, !lockdep_commit_lock_is_held(net)); rcu_read_lock(); - list = rhltable_lookup(&nft_objname_ht, &k, nft_objname_ht_params); + list = rhltable_lookup(&table->objname_ht, &k, nft_objname_ht_params); if (!list) goto out; @@ -8382,7 +8387,7 @@ static int nf_tables_newobj(struct sk_buff *skb, const struct nfnl_info *info, if (err < 0) goto err_trans; - err = rhltable_insert(&nft_objname_ht, &obj->rhlhead, + err = rhltable_insert(&table->objname_ht, &obj->rhlhead, nft_objname_ht_params); if (err < 0) goto err_obj_ht; @@ -8567,8 +8572,8 @@ nf_tables_getobj_single(u32 portid, const struct nfnl_info *info, struct netlink_ext_ack *extack = info->extack; u8 genmask = nft_genmask_cur(info->net); u8 family = info->nfmsg->nfgen_family; - const struct nft_table *table; struct net *net = info->net; + struct nft_table *table; struct nft_object *obj; struct sk_buff *skb2; u32 objtype; @@ -10437,9 +10442,9 @@ static void nf_tables_commit_chain(struct net *net, struct nft_chain *chain) nf_tables_commit_chain_free_rules_old(g0); } -static void nft_obj_del(struct nft_object *obj) +static void nft_obj_del(struct nft_table *table, struct nft_object *obj) { - rhltable_remove(&nft_objname_ht, &obj->rhlhead, nft_objname_ht_params); + rhltable_remove(&table->objname_ht, &obj->rhlhead, nft_objname_ht_params); list_del_rcu(&obj->list); } @@ -11124,7 +11129,7 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb) break; case NFT_MSG_DELOBJ: case NFT_MSG_DESTROYOBJ: - nft_obj_del(nft_trans_obj(trans)); + nft_obj_del(table, nft_trans_obj(trans)); nf_tables_obj_notify(&ctx, nft_trans_obj(trans), trans->msg_type); break; @@ -11416,7 +11421,7 @@ static int __nf_tables_abort(struct net *net, enum nfnl_abort_action action) nft_trans_destroy(trans); } else { nft_use_dec_restore(&table->use); - nft_obj_del(nft_trans_obj(trans)); + nft_obj_del(table, nft_trans_obj(trans)); } break; case NFT_MSG_DELOBJ: @@ -12043,7 +12048,7 @@ static void __nft_release_table(struct net *net, struct nft_table *table) nft_set_destroy(&ctx, set); } list_for_each_entry_safe(obj, ne, &table->objects, list) { - nft_obj_del(obj); + nft_obj_del(table, obj); nft_use_dec(&table->use); nft_obj_destroy(&ctx, obj); } @@ -12225,10 +12230,6 @@ static int __init nf_tables_module_init(void) if (err < 0) goto err_netdev_notifier; - err = rhltable_init(&nft_objname_ht, &nft_objname_ht_params); - if (err < 0) - goto err_rht_objname; - err = nft_offload_init(); if (err < 0) goto err_offload; @@ -12251,8 +12252,6 @@ err_nfnl_subsys: err_netlink_notifier: nft_offload_exit(); err_offload: - rhltable_destroy(&nft_objname_ht); -err_rht_objname: unregister_netdevice_notifier(&nf_tables_flowtable_notifier); err_netdev_notifier: nf_tables_core_module_exit(); @@ -12274,7 +12273,6 @@ static void __exit nf_tables_module_exit(void) unregister_pernet_subsys(&nf_tables_net_ops); cancel_work_sync(&trans_gc_work); rcu_barrier(); - rhltable_destroy(&nft_objname_ht); nf_tables_core_module_exit(); } -- cgit v1.2.3 From 305b63e1402267459fdabb183af4527f6799eebf Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 21 Jul 2026 22:02:46 +0200 Subject: netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH The XT_HASHLIMIT_RATE_MATCH flag mode changes the semantics of the dsthash_ent structure which represents an entry in the hashtable. There is a union area which uses a different layout to express the rate match mode. Update .checkentry path to validate the XT_HASHLIMIT_RATE_MATCH mode flag is requested by two or more different rules that refer to the same hashtable. Otherwise, uninitialized access to the burst field in the union is possible. Reject the use of the XT_HASHLIMIT_RATE_MATCH mode flag if set on by revision less than 3 too. Fixes: bea74641e378 ("netfilter: xt_hashlimit: add rate match mode") Reported-and-tested-by: Talha Berk Arslan Link: https://patch.msgid.link/20260721074629.668-1-talha.anything.info@gmail.com/ Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_hashlimit.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index 2704b4b60d1e..9af0fa895f73 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -117,6 +117,7 @@ struct xt_hashlimit_htable { refcount_t use; u_int8_t family; bool rnd_initialized; + bool ratematch; struct hashlimit_cfg3 cfg; /* config */ @@ -323,6 +324,7 @@ static int htable_create(struct net *net, struct hashlimit_cfg3 *cfg, kvfree(hinfo); return -ENOMEM; } + hinfo->ratematch = !!(cfg->mode & XT_HASHLIMIT_RATE_MATCH); spin_lock_init(&hinfo->lock); switch (revision) { @@ -872,7 +874,10 @@ static int hashlimit_mt_check_common(const struct xt_mtchk_param *par, } /* Check for overflow. */ - if (revision >= 3 && cfg->mode & XT_HASHLIMIT_RATE_MATCH) { + if (cfg->mode & XT_HASHLIMIT_RATE_MATCH) { + if (revision < 3) + return -EINVAL; + if (cfg->avg == 0 || cfg->avg > U32_MAX) { pr_info_ratelimited("invalid rate\n"); return -ERANGE; @@ -905,6 +910,15 @@ static int hashlimit_mt_check_common(const struct xt_mtchk_param *par, mutex_unlock(&hashlimit_mutex); return ret; } + } else { + if ((cfg->mode & XT_HASHLIMIT_RATE_MATCH && + !(*hinfo)->ratematch) || + (!(cfg->mode & XT_HASHLIMIT_RATE_MATCH) && + (*hinfo)->ratematch)) { + mutex_unlock(&hashlimit_mutex); + htable_put(*hinfo); + return -EINVAL; + } } mutex_unlock(&hashlimit_mutex); -- cgit v1.2.3 From e876b75b9020a97bbdc79721e7fc749024891c65 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Wed, 22 Jul 2026 13:15:15 +0300 Subject: ipvs: fix the checksum validations ip_vs_in_icmp_v6() is missing checksum validation for ICMPv6 packets from clients. In fact, as for TCP/UDP we should validate the checksum for ICMP packets only when we mangle the packets on MASQ or on reply for tunnel. Also, Sashiko points out that handle_response_icmp() being common for IPv4 and IPv6 is missing the pseudo-header calculation while validating ICMPv6 messages from real servers which is a problem if checksum is not validated by the hardware. Fix the problems by creating ip_vs_checksum_common_check() helper and use it for TCP/UDP/ICMP both for IPv4 and IPv6. Rely on the nf_checksum() for validating the ICMP messages but use it also for TCP and UDP. Use correct IP offset for IP_VS_DBG_RL_PKT for TCP/UDP/SCTP. IPVS packets (TCP/UDP/SCTP/ICMP) do not need checksum validation on LOCAL_OUT (local clients or local real servers) and on FORWARD (traffic from servers on LAN). Do it only on LOCAL_IN, in case nf_checksum() is not called on PRE_ROUTING. Also, ip_vs_checksum_complete() can be marked static. Fixes: 2a3b791e6e11 ("IPVS: Add/adjust Netfilter hook functions and helpers for v6") Link: https://sashiko.dev/#/patchset/20260708180315.77413-1-ja%40ssi.bg Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- include/net/ip_vs.h | 31 ++++++++++++++++++++-- net/netfilter/ipvs/ip_vs_core.c | 20 +++++++++++--- net/netfilter/ipvs/ip_vs_proto_sctp.c | 15 ++++++----- net/netfilter/ipvs/ip_vs_proto_tcp.c | 44 ++++++------------------------ net/netfilter/ipvs/ip_vs_proto_udp.c | 50 ++++++++--------------------------- 5 files changed, 74 insertions(+), 86 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 417ff51f62fc..d8f9ddb0fb38 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -25,7 +25,9 @@ #include /* for union nf_inet_addr */ #include #include /* for struct ipv6hdr */ +#include #include +#include #if IS_ENABLED(CONFIG_NF_CONNTRACK) #include #endif @@ -2066,8 +2068,6 @@ void ip_vs_nat_icmp_v6(struct sk_buff *skb, struct ip_vs_protocol *pp, struct ip_vs_conn *cp, int dir); #endif -__sum16 ip_vs_checksum_complete(struct sk_buff *skb, int offset); - static inline __wsum ip_vs_check_diff4(__be32 old, __be32 new, __wsum oldsum) { __be32 diff[2] = { ~old, new }; @@ -2093,6 +2093,33 @@ static inline __wsum ip_vs_check_diff2(__be16 old, __be16 new, __wsum oldsum) return csum_partial(diff, sizeof(diff), oldsum); } +static inline bool ip_vs_checksum_needed(struct sk_buff *skb, int af) +{ + /* Checksum unnecessary or already validated? */ + if (skb_csum_unnecessary(skb)) + return false; + /* LOCAL_OUT ? */ + if (!skb->dev || skb->dev->flags & IFF_LOOPBACK) + return false; + /* !LOCAL_IN (FORWARD) ? */ + if (af == AF_INET6) { + if (!(dst_rt6_info(skb_dst(skb))->rt6i_flags & RTF_LOCAL)) + return false; + } else { + if (!(skb_rtable(skb)->rt_flags & RTCF_LOCAL)) + return false; + } + return true; +} + +static inline bool ip_vs_checksum_common_check(struct sk_buff *skb, + int offset, int proto, int af) +{ + if (!ip_vs_checksum_needed(skb, af)) + return true; + return !nf_checksum(skb, NF_INET_LOCAL_IN, offset, proto, af); +} + /* Forget current conntrack (unconfirmed) and attach notrack entry */ static inline void ip_vs_notrack(struct sk_buff *skb) { diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index bafab93451d0..c8b512725e6e 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -867,7 +867,7 @@ static int sysctl_nat_icmp_send(struct netns_ipvs *ipvs) { return 0; } #endif -__sum16 ip_vs_checksum_complete(struct sk_buff *skb, int offset) +static __sum16 ip_vs_checksum_complete(struct sk_buff *skb, int offset) { return csum_fold(skb_checksum(skb, offset, skb->len - offset, 0)); } @@ -1038,13 +1038,14 @@ static int handle_response_icmp(int af, struct sk_buff *skb, unsigned int offset, unsigned int ihl, unsigned int hooknum) { + int iproto = af == AF_INET6 ? IPPROTO_ICMPV6 : IPPROTO_ICMP; unsigned int verdict = NF_DROP; if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ) goto after_nat; /* Ensure the checksum is correct */ - if (!skb_csum_unnecessary(skb) && ip_vs_checksum_complete(skb, ihl)) { + if (!ip_vs_checksum_common_check(skb, ihl, iproto, af)) { /* Failed checksum! */ IP_VS_DBG_BUF(1, "Forward ICMP: failed checksum from %s!\n", IP_VS_DBG_ADDR(af, snet)); @@ -1898,7 +1899,8 @@ ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related, verdict = NF_DROP; /* Ensure the checksum is correct */ - if (!skb_csum_unnecessary(skb) && ip_vs_checksum_complete(skb, ihl)) { + if ((IP_VS_FWD_METHOD(cp) == IP_VS_CONN_F_MASQ || tunnel) && + !ip_vs_checksum_common_check(skb, ihl, IPPROTO_ICMP, AF_INET)) { /* Failed checksum! */ IP_VS_DBG(1, "Incoming ICMP: failed checksum from %pI4!\n", &iph->saddr); @@ -2064,6 +2066,18 @@ static int ip_vs_in_icmp_v6(struct netns_ipvs *ipvs, struct sk_buff *skb, goto out; } + verdict = NF_DROP; + + /* Ensure the checksum is correct */ + if (IP_VS_FWD_METHOD(cp) == IP_VS_CONN_F_MASQ && + !ip_vs_checksum_common_check(skb, iph->len, IPPROTO_ICMPV6, + AF_INET6)) { + /* Failed checksum! */ + IP_VS_DBG(1, "Incoming ICMPv6: failed checksum from %pI6c!\n", + &iph->saddr); + goto out; + } + /* do the statistics and put it back */ ip_vs_in_stats(cp, skb); diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c index c67317be17df..f6f732b7dfa8 100644 --- a/net/netfilter/ipvs/ip_vs_proto_sctp.c +++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c @@ -11,7 +11,7 @@ static int sctp_csum_check(int af, struct sk_buff *skb, struct ip_vs_protocol *pp, - unsigned int sctphoff); + struct ip_vs_iphdr *iph); static int sctp_conn_schedule(struct netns_ipvs *ipvs, int af, struct sk_buff *skb, @@ -109,7 +109,7 @@ sctp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, int ret; /* Some checks before mangling */ - if (!sctp_csum_check(cp->af, skb, pp, sctphoff)) + if (!sctp_csum_check(cp->af, skb, pp, iph)) return 0; /* Call application helper if needed */ @@ -157,7 +157,7 @@ sctp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, int ret; /* Some checks before mangling */ - if (!sctp_csum_check(cp->af, skb, pp, sctphoff)) + if (!sctp_csum_check(cp->af, skb, pp, iph)) return 0; /* Call application helper if needed */ @@ -187,19 +187,22 @@ sctp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, static int sctp_csum_check(int af, struct sk_buff *skb, struct ip_vs_protocol *pp, - unsigned int sctphoff) + struct ip_vs_iphdr *iph) { + unsigned int sctphoff = iph->len; struct sctphdr *sh; __le32 cmp, val; + if (!ip_vs_checksum_needed(skb, af)) + return 1; sh = (struct sctphdr *)(skb->data + sctphoff); cmp = sh->checksum; val = sctp_compute_cksum(skb, sctphoff); if (val != cmp) { /* CRC failure, dump it. */ - IP_VS_DBG_RL_PKT(0, af, pp, skb, 0, - "Failed checksum for"); + IP_VS_DBG_RL_PKT(0, af, pp, skb, iph->off, + "Failed checksum for"); return 0; } return 1; diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c index f86b763efcc4..533fce3e5e4e 100644 --- a/net/netfilter/ipvs/ip_vs_proto_tcp.c +++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c @@ -29,7 +29,7 @@ static int tcp_csum_check(int af, struct sk_buff *skb, struct ip_vs_protocol *pp, - unsigned int tcphoff); + struct ip_vs_iphdr *iph); static int tcp_conn_schedule(struct netns_ipvs *ipvs, int af, struct sk_buff *skb, @@ -166,7 +166,7 @@ tcp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, int ret; /* Some checks before mangling */ - if (!tcp_csum_check(cp->af, skb, pp, tcphoff)) + if (!tcp_csum_check(cp->af, skb, pp, iph)) return 0; /* Call application helper if needed */ @@ -244,7 +244,7 @@ tcp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, int ret; /* Some checks before mangling */ - if (!tcp_csum_check(cp->af, skb, pp, tcphoff)) + if (!tcp_csum_check(cp->af, skb, pp, iph)) return 0; /* @@ -302,41 +302,13 @@ tcp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, static int tcp_csum_check(int af, struct sk_buff *skb, struct ip_vs_protocol *pp, - unsigned int tcphoff) + struct ip_vs_iphdr *iph) { - switch (skb->ip_summed) { - case CHECKSUM_NONE: - skb->csum = skb_checksum(skb, tcphoff, skb->len - tcphoff, 0); - fallthrough; - case CHECKSUM_COMPLETE: -#ifdef CONFIG_IP_VS_IPV6 - if (af == AF_INET6) { - if (csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, - skb->len - tcphoff, - IPPROTO_TCP, - skb->csum)) { - IP_VS_DBG_RL_PKT(0, af, pp, skb, 0, - "Failed checksum for"); - return 0; - } - } else -#endif - if (csum_tcpudp_magic(ip_hdr(skb)->saddr, - ip_hdr(skb)->daddr, - skb->len - tcphoff, - ip_hdr(skb)->protocol, - skb->csum)) { - IP_VS_DBG_RL_PKT(0, af, pp, skb, 0, - "Failed checksum for"); - return 0; - } - break; - default: - /* No need to checksum. */ - break; + if (!ip_vs_checksum_common_check(skb, iph->len, IPPROTO_TCP, af)) { + IP_VS_DBG_RL_PKT(0, af, pp, skb, iph->off, + "Failed checksum for"); + return 0; } - return 1; } diff --git a/net/netfilter/ipvs/ip_vs_proto_udp.c b/net/netfilter/ipvs/ip_vs_proto_udp.c index 58f9e255927e..de3597347542 100644 --- a/net/netfilter/ipvs/ip_vs_proto_udp.c +++ b/net/netfilter/ipvs/ip_vs_proto_udp.c @@ -25,7 +25,7 @@ static int udp_csum_check(int af, struct sk_buff *skb, struct ip_vs_protocol *pp, - unsigned int udphoff); + struct ip_vs_iphdr *iph); static int udp_conn_schedule(struct netns_ipvs *ipvs, int af, struct sk_buff *skb, @@ -155,7 +155,7 @@ udp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, int ret; /* Some checks before mangling */ - if (!udp_csum_check(cp->af, skb, pp, udphoff)) + if (!udp_csum_check(cp->af, skb, pp, iph)) return 0; /* @@ -238,7 +238,7 @@ udp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, int ret; /* Some checks before mangling */ - if (!udp_csum_check(cp->af, skb, pp, udphoff)) + if (!udp_csum_check(cp->af, skb, pp, iph)) return 0; /* @@ -298,48 +298,20 @@ udp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, static int udp_csum_check(int af, struct sk_buff *skb, struct ip_vs_protocol *pp, - unsigned int udphoff) + struct ip_vs_iphdr *iph) { struct udphdr _udph, *uh; - uh = skb_header_pointer(skb, udphoff, sizeof(_udph), &_udph); + uh = skb_header_pointer(skb, iph->len, sizeof(_udph), &_udph); if (uh == NULL) return 0; - if (uh->check != 0) { - switch (skb->ip_summed) { - case CHECKSUM_NONE: - skb->csum = skb_checksum(skb, udphoff, - skb->len - udphoff, 0); - fallthrough; - case CHECKSUM_COMPLETE: -#ifdef CONFIG_IP_VS_IPV6 - if (af == AF_INET6) { - if (csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, - skb->len - udphoff, - IPPROTO_UDP, - skb->csum)) { - IP_VS_DBG_RL_PKT(0, af, pp, skb, 0, - "Failed checksum for"); - return 0; - } - } else -#endif - if (csum_tcpudp_magic(ip_hdr(skb)->saddr, - ip_hdr(skb)->daddr, - skb->len - udphoff, - ip_hdr(skb)->protocol, - skb->csum)) { - IP_VS_DBG_RL_PKT(0, af, pp, skb, 0, - "Failed checksum for"); - return 0; - } - break; - default: - /* No need to checksum. */ - break; - } + if (!uh->check) + return 1; + if (!ip_vs_checksum_common_check(skb, iph->len, IPPROTO_UDP, af)) { + IP_VS_DBG_RL_PKT(0, af, pp, skb, iph->off, + "Failed checksum for"); + return 0; } return 1; } -- cgit v1.2.3 From 15cab31a3730e05f0767b922a7450e5d784b2607 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Wed, 22 Jul 2026 13:15:16 +0300 Subject: ipvs: fix places with wrong packet offsets The offsets we use to packet headers and payloads should be based on skb->data. We even already respect non-zero network offset in ip_vs_fill_iph_skb() but some places do it wrongly and support only zero offset which is expected for the IP layer where IPVS has hooks. Change all places that instead of skb->data use offsets based on the network header (skb_network_header, ip_hdr, etc) because this doubles the network offset as noted by Sashiko. For ip_vs_nat_icmp_v6() we can even rely on the IPv6 header parsing done by the caller. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://sashiko.dev/#/patchset/20260710143733.29741-2-fw%40strlen.de Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- include/net/ip_vs.h | 15 ++-- net/netfilter/ipvs/ip_vs_app.c | 4 +- net/netfilter/ipvs/ip_vs_core.c | 133 +++++++++++++++++----------------- net/netfilter/ipvs/ip_vs_proto_sctp.c | 4 +- net/netfilter/ipvs/ip_vs_proto_tcp.c | 4 +- net/netfilter/ipvs/ip_vs_proto_udp.c | 4 +- net/netfilter/ipvs/ip_vs_xmit.c | 26 ++++--- 7 files changed, 97 insertions(+), 93 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index d8f9ddb0fb38..4a10a01d6e2f 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -1974,8 +1974,9 @@ int ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, int ip_vs_dr_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, struct ip_vs_iphdr *iph); int ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, - struct ip_vs_protocol *pp, int offset, - unsigned int hooknum, struct ip_vs_iphdr *iph); + struct ip_vs_protocol *pp, unsigned int toff, + unsigned int wlen, unsigned int hooknum, + struct ip_vs_iphdr *ciph); void ip_vs_dest_dst_rcu_free(struct rcu_head *head); #ifdef CONFIG_IP_VS_IPV6 @@ -1988,8 +1989,9 @@ int ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, int ip_vs_dr_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, struct ip_vs_iphdr *iph); int ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, - struct ip_vs_protocol *pp, int offset, - unsigned int hooknum, struct ip_vs_iphdr *iph); + struct ip_vs_protocol *pp, unsigned int toff, + unsigned int wlen, unsigned int hooknum, + struct ip_vs_iphdr *ciph); #endif #ifdef CONFIG_SYSCTL @@ -2061,11 +2063,12 @@ static inline bool ip_vs_conn_use_hash2(struct ip_vs_conn *cp) } void ip_vs_nat_icmp(struct sk_buff *skb, struct ip_vs_protocol *pp, - struct ip_vs_conn *cp, int dir); + struct ip_vs_conn *cp, int dir, unsigned int toff); #ifdef CONFIG_IP_VS_IPV6 void ip_vs_nat_icmp_v6(struct sk_buff *skb, struct ip_vs_protocol *pp, - struct ip_vs_conn *cp, int dir); + struct ip_vs_conn *cp, int dir, unsigned int toff, + struct ip_vs_iphdr *ciph); #endif static inline __wsum ip_vs_check_diff4(__be32 old, __be32 new, __wsum oldsum) diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c index b0e00be85cb1..11cbdbaf561d 100644 --- a/net/netfilter/ipvs/ip_vs_app.c +++ b/net/netfilter/ipvs/ip_vs_app.c @@ -367,7 +367,7 @@ static inline int app_tcp_pkt_out(struct ip_vs_conn *cp, struct sk_buff *skb, if (skb_ensure_writable(skb, ipvsh->len + sizeof(*th))) return 0; - th = (struct tcphdr *)(skb_network_header(skb) + ipvsh->len); + th = (struct tcphdr *)(skb->data + ipvsh->len); /* * Remember seq number in case this pkt gets resized @@ -443,7 +443,7 @@ static inline int app_tcp_pkt_in(struct ip_vs_conn *cp, struct sk_buff *skb, if (skb_ensure_writable(skb, ipvsh->len + sizeof(*th))) return 0; - th = (struct tcphdr *)(skb_network_header(skb) + ipvsh->len); + th = (struct tcphdr *)(skb->data + ipvsh->len); /* * Remember seq number in case this pkt gets resized diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index c8b512725e6e..cd5eb71543ec 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -924,13 +924,12 @@ static int ip_vs_route_me_harder(struct netns_ipvs *ipvs, int af, * - inout: 1=in->out, 0=out->in */ void ip_vs_nat_icmp(struct sk_buff *skb, struct ip_vs_protocol *pp, - struct ip_vs_conn *cp, int inout) + struct ip_vs_conn *cp, int inout, unsigned int toff) { struct iphdr *iph = ip_hdr(skb); - unsigned int icmp_offset = iph->ihl*4; - struct icmphdr *icmph = (struct icmphdr *)(skb_network_header(skb) + - icmp_offset); + struct icmphdr *icmph = (struct icmphdr *)(skb->data + toff); struct iphdr *ciph = (struct iphdr *)(icmph + 1); + unsigned int coff __maybe_unused = toff + sizeof(struct icmphdr); if (inout) { iph->saddr = cp->vaddr.ip; @@ -957,48 +956,45 @@ void ip_vs_nat_icmp(struct sk_buff *skb, struct ip_vs_protocol *pp, /* And finally the ICMP checksum */ icmph->checksum = 0; - icmph->checksum = ip_vs_checksum_complete(skb, icmp_offset); + icmph->checksum = ip_vs_checksum_complete(skb, toff); skb->ip_summed = CHECKSUM_UNNECESSARY; if (inout) - IP_VS_DBG_PKT(11, AF_INET, pp, skb, (void *)ciph - (void *)iph, - "Forwarding altered outgoing ICMP"); + IP_VS_DBG_PKT(11, AF_INET, pp, skb, coff, + "Forwarding altered outgoing ICMP"); else - IP_VS_DBG_PKT(11, AF_INET, pp, skb, (void *)ciph - (void *)iph, - "Forwarding altered incoming ICMP"); + IP_VS_DBG_PKT(11, AF_INET, pp, skb, coff, + "Forwarding altered incoming ICMP"); } #ifdef CONFIG_IP_VS_IPV6 void ip_vs_nat_icmp_v6(struct sk_buff *skb, struct ip_vs_protocol *pp, - struct ip_vs_conn *cp, int inout) + struct ip_vs_conn *cp, int inout, unsigned int toff, + struct ip_vs_iphdr *ciph) { struct ipv6hdr *iph = ipv6_hdr(skb); - unsigned int icmp_offset = 0; - unsigned int offs = 0; /* header offset*/ int protocol; struct icmp6hdr *icmph; - struct ipv6hdr *ciph; - unsigned short fragoffs; + struct ipv6hdr *cih; - ipv6_find_hdr(skb, &icmp_offset, IPPROTO_ICMPV6, &fragoffs, NULL); - icmph = (struct icmp6hdr *)(skb_network_header(skb) + icmp_offset); - offs = icmp_offset + sizeof(struct icmp6hdr); - ciph = (struct ipv6hdr *)(skb_network_header(skb) + offs); + icmph = (struct icmp6hdr *)(skb->data + toff); + cih = (struct ipv6hdr *)(skb->data + ciph->off); - protocol = ipv6_find_hdr(skb, &offs, -1, &fragoffs, NULL); + protocol = ciph->protocol; if (inout) { iph->saddr = cp->vaddr.in6; - ciph->daddr = cp->vaddr.in6; + cih->daddr = cp->vaddr.in6; } else { iph->daddr = cp->daddr.in6; - ciph->saddr = cp->daddr.in6; + cih->saddr = cp->daddr.in6; } /* the TCP/UDP/SCTP port */ - if (!fragoffs && (IPPROTO_TCP == protocol || IPPROTO_UDP == protocol || - IPPROTO_SCTP == protocol)) { - __be16 *ports = (void *)(skb_network_header(skb) + offs); + if (!ciph->fragoffs && + (protocol == IPPROTO_TCP || protocol == IPPROTO_UDP || + protocol == IPPROTO_SCTP)) { + __be16 *ports = (void *)(skb->data + ciph->len); IP_VS_DBG(11, "%s() changed port %d to %d\n", __func__, ntohs(inout ? ports[1] : ports[0]), @@ -1011,19 +1007,17 @@ void ip_vs_nat_icmp_v6(struct sk_buff *skb, struct ip_vs_protocol *pp, /* And finally the ICMP checksum */ icmph->icmp6_cksum = ~csum_ipv6_magic(&iph->saddr, &iph->daddr, - skb->len - icmp_offset, + skb->len - toff, IPPROTO_ICMPV6, 0); - skb->csum_start = skb_network_header(skb) - skb->head + icmp_offset; + skb->csum_start = skb_headroom(skb) + toff; skb->csum_offset = offsetof(struct icmp6hdr, icmp6_cksum); skb->ip_summed = CHECKSUM_PARTIAL; if (inout) - IP_VS_DBG_PKT(11, AF_INET6, pp, skb, - (void *)ciph - (void *)iph, + IP_VS_DBG_PKT(11, AF_INET6, pp, skb, ciph->off, "Forwarding altered outgoing ICMPv6"); else - IP_VS_DBG_PKT(11, AF_INET6, pp, skb, - (void *)ciph - (void *)iph, + IP_VS_DBG_PKT(11, AF_INET6, pp, skb, ciph->off, "Forwarding altered incoming ICMPv6"); } #endif @@ -1033,37 +1027,38 @@ void ip_vs_nat_icmp_v6(struct sk_buff *skb, struct ip_vs_protocol *pp, */ static int handle_response_icmp(int af, struct sk_buff *skb, union nf_inet_addr *snet, - __u8 protocol, struct ip_vs_conn *cp, + struct ip_vs_conn *cp, struct ip_vs_protocol *pp, - unsigned int offset, unsigned int ihl, - unsigned int hooknum) + struct ip_vs_iphdr *ciph, + unsigned int toff, unsigned int hooknum) { int iproto = af == AF_INET6 ? IPPROTO_ICMPV6 : IPPROTO_ICMP; unsigned int verdict = NF_DROP; + unsigned int ctoff = ciph->len; if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ) goto after_nat; /* Ensure the checksum is correct */ - if (!ip_vs_checksum_common_check(skb, ihl, iproto, af)) { + if (!ip_vs_checksum_common_check(skb, toff, iproto, af)) { /* Failed checksum! */ IP_VS_DBG_BUF(1, "Forward ICMP: failed checksum from %s!\n", IP_VS_DBG_ADDR(af, snet)); goto out; } - if (IPPROTO_TCP == protocol || IPPROTO_UDP == protocol || - IPPROTO_SCTP == protocol) - offset += 2 * sizeof(__u16); - if (skb_ensure_writable(skb, offset)) + if (ciph->protocol == IPPROTO_TCP || ciph->protocol == IPPROTO_UDP || + ciph->protocol == IPPROTO_SCTP) + ctoff += 2 * sizeof(__u16); + if (skb_ensure_writable(skb, ctoff)) goto out; #ifdef CONFIG_IP_VS_IPV6 if (af == AF_INET6) - ip_vs_nat_icmp_v6(skb, pp, cp, 1); + ip_vs_nat_icmp_v6(skb, pp, cp, 1, toff, ciph); else #endif - ip_vs_nat_icmp(skb, pp, cp, 1); + ip_vs_nat_icmp(skb, pp, cp, 1, toff); if (ip_vs_route_me_harder(cp->ipvs, af, skb, hooknum)) goto out; @@ -1091,9 +1086,9 @@ out: * Currently handles error types - unreachable, quench, ttl exceeded. */ static int ip_vs_out_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, - int *related, unsigned int hooknum) + int *related, unsigned int hooknum, + struct ip_vs_iphdr *ipvsh) { - struct iphdr *iph; struct icmphdr _icmph, *ic; struct iphdr _ciph, *cih; /* The ip header contained within the ICMP */ struct ip_vs_iphdr ciph; @@ -1108,17 +1103,19 @@ static int ip_vs_out_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, if (ip_is_fragment(ip_hdr(skb))) { if (ip_vs_gather_frags(ipvs, skb, ip_vs_defrag_user(hooknum))) return NF_STOLEN; + if (!ip_vs_fill_iph_skb(AF_INET, skb, false, ipvsh)) + return NF_ACCEPT; } - iph = ip_hdr(skb); - offset = ihl = iph->ihl * 4; + ihl = ipvsh->len; + offset = ipvsh->len; ic = skb_header_pointer(skb, offset, sizeof(_icmph), &_icmph); if (ic == NULL) return NF_DROP; IP_VS_DBG(12, "Outgoing ICMP (%d,%d) %pI4->%pI4\n", ic->type, ntohs(icmp_id(ic)), - &iph->saddr, &iph->daddr); + &ipvsh->saddr.ip, &ipvsh->daddr.ip); /* * Work through seeing if this is for us. @@ -1137,7 +1134,7 @@ static int ip_vs_out_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, /* Now find the contained IP header */ offset += sizeof(_icmph); cih = skb_header_pointer(skb, offset, sizeof(_ciph), &_ciph); - if (cih == NULL) + if (!(cih && cih->version == 4 && cih->ihl >= 5)) return NF_ACCEPT; /* The packet looks wrong, ignore */ pp = ip_vs_proto_get(cih->protocol); @@ -1160,9 +1157,9 @@ static int ip_vs_out_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, if (!cp) return NF_ACCEPT; - snet.ip = iph->saddr; - return handle_response_icmp(AF_INET, skb, &snet, cih->protocol, cp, - pp, ciph.len, ihl, hooknum); + snet.ip = ipvsh->saddr.ip; + return handle_response_icmp(AF_INET, skb, &snet, cp, pp, &ciph, ihl, + hooknum); } #ifdef CONFIG_IP_VS_IPV6 @@ -1175,7 +1172,6 @@ static int ip_vs_out_icmp_v6(struct netns_ipvs *ipvs, struct sk_buff *skb, struct ip_vs_conn *cp; struct ip_vs_protocol *pp; union nf_inet_addr snet; - unsigned int offset; *related = 1; ic = frag_safe_skb_hp(skb, ipvsh->len, sizeof(_icmph), &_icmph); @@ -1218,9 +1214,8 @@ static int ip_vs_out_icmp_v6(struct netns_ipvs *ipvs, struct sk_buff *skb, return NF_ACCEPT; snet.in6 = ciph.saddr.in6; - offset = ciph.len; - return handle_response_icmp(AF_INET6, skb, &snet, ciph.protocol, cp, - pp, offset, ipvsh->len, hooknum); + return handle_response_icmp(AF_INET6, skb, &snet, cp, pp, &ciph, + ipvsh->len, hooknum); } #endif @@ -1546,7 +1541,8 @@ ip_vs_out_hook(void *priv, struct sk_buff *skb, const struct nf_hook_state *stat #endif if (unlikely(iph.protocol == IPPROTO_ICMP)) { int related; - int verdict = ip_vs_out_icmp(ipvs, skb, &related, hooknum); + int verdict = ip_vs_out_icmp(ipvs, skb, &related, + hooknum, &iph); if (related) return verdict; @@ -1754,9 +1750,8 @@ unk: */ static int ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related, - unsigned int hooknum) + unsigned int hooknum, struct ip_vs_iphdr *iph) { - struct iphdr *iph; struct icmphdr _icmph, *ic; struct iphdr _ciph, *cih; /* The ip header contained within the ICMP */ struct ip_vs_iphdr ciph; @@ -1766,7 +1761,7 @@ ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related, unsigned int offset, offset2, ihl, verdict; bool tunnel, new_cp = false; union nf_inet_addr *raddr; - char *outer_proto = "IPIP"; + char *outer_proto __maybe_unused = "IPIP"; unsigned int hlen_ipip; int ulen = 0; @@ -1776,17 +1771,19 @@ ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related, if (ip_is_fragment(ip_hdr(skb))) { if (ip_vs_gather_frags(ipvs, skb, ip_vs_defrag_user(hooknum))) return NF_STOLEN; + if (!ip_vs_fill_iph_skb(AF_INET, skb, false, iph)) + return NF_ACCEPT; } - iph = ip_hdr(skb); - offset = ihl = iph->ihl * 4; + ihl = iph->len; + offset = iph->len; ic = skb_header_pointer(skb, offset, sizeof(_icmph), &_icmph); if (ic == NULL) return NF_DROP; IP_VS_DBG(12, "Incoming ICMP (%d,%d) %pI4->%pI4\n", ic->type, ntohs(icmp_id(ic)), - &iph->saddr, &iph->daddr); + &iph->saddr.ip, &iph->daddr.ip); /* * Work through seeing if this is for us. @@ -1903,7 +1900,7 @@ ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related, !ip_vs_checksum_common_check(skb, ihl, IPPROTO_ICMP, AF_INET)) { /* Failed checksum! */ IP_VS_DBG(1, "Incoming ICMP: failed checksum from %pI4!\n", - &iph->saddr); + &iph->saddr.ip); goto out; } @@ -1974,7 +1971,8 @@ ignore_tunnel: if (IPPROTO_TCP == cih->protocol || IPPROTO_UDP == cih->protocol || IPPROTO_SCTP == cih->protocol) offset += 2 * sizeof(__u16); - verdict = ip_vs_icmp_xmit(skb, cp, pp, offset, hooknum, &ciph); + verdict = ip_vs_icmp_xmit(skb, cp, pp, iph->len, offset, hooknum, + &ciph); out: if (likely(!new_cp)) @@ -2087,7 +2085,8 @@ static int ip_vs_in_icmp_v6(struct netns_ipvs *ipvs, struct sk_buff *skb, IPPROTO_SCTP == ciph.protocol) offset += 2 * sizeof(__u16); /* Also mangle ports */ - verdict = ip_vs_icmp_xmit_v6(skb, cp, pp, offset, hooknum, &ciph); + verdict = ip_vs_icmp_xmit_v6(skb, cp, pp, iph->len, offset, hooknum, + &ciph); out: if (likely(!new_cp)) @@ -2166,7 +2165,7 @@ ip_vs_in_hook(void *priv, struct sk_buff *skb, const struct nf_hook_state *state if (unlikely(iph.protocol == IPPROTO_ICMP)) { int related; int verdict = ip_vs_in_icmp(ipvs, skb, &related, - hooknum); + hooknum, &iph); if (related) return verdict; @@ -2302,6 +2301,7 @@ ip_vs_forward_icmp(void *priv, struct sk_buff *skb, const struct nf_hook_state *state) { struct netns_ipvs *ipvs = net_ipvs(state->net); + struct ip_vs_iphdr iphdr; int r; /* ipvs enabled in this netns ? */ @@ -2311,10 +2311,9 @@ ip_vs_forward_icmp(void *priv, struct sk_buff *skb, if (state->pf == NFPROTO_IPV4) { if (ip_hdr(skb)->protocol != IPPROTO_ICMP) return NF_ACCEPT; + ip_vs_fill_iph_skb(AF_INET, skb, false, &iphdr); #ifdef CONFIG_IP_VS_IPV6 } else { - struct ip_vs_iphdr iphdr; - ip_vs_fill_iph_skb(AF_INET6, skb, false, &iphdr); if (iphdr.protocol != IPPROTO_ICMPV6) @@ -2324,7 +2323,7 @@ ip_vs_forward_icmp(void *priv, struct sk_buff *skb, #endif } - return ip_vs_in_icmp(ipvs, skb, &r, state->hook); + return ip_vs_in_icmp(ipvs, skb, &r, state->hook, &iphdr); } static const struct nf_hook_ops ip_vs_ops4[] = { diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c index f6f732b7dfa8..3dbd3096e163 100644 --- a/net/netfilter/ipvs/ip_vs_proto_sctp.c +++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c @@ -121,7 +121,7 @@ sctp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, payload_csum = true; } - sctph = (void *) skb_network_header(skb) + sctphoff; + sctph = (void *)skb->data + sctphoff; /* Only update csum if we really have to */ if (sctph->source != cp->vport || payload_csum || @@ -169,7 +169,7 @@ sctp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, payload_csum = true; } - sctph = (void *) skb_network_header(skb) + sctphoff; + sctph = (void *)skb->data + sctphoff; /* Only update csum if we really have to */ if (sctph->dest != cp->dport || payload_csum || diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c index 533fce3e5e4e..99a286fdc90c 100644 --- a/net/netfilter/ipvs/ip_vs_proto_tcp.c +++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c @@ -179,7 +179,7 @@ tcp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, payload_csum = true; } - tcph = (void *)skb_network_header(skb) + tcphoff; + tcph = (void *)skb->data + tcphoff; tcph->source = cp->vport; /* Adjust TCP checksums */ @@ -260,7 +260,7 @@ tcp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, payload_csum = true; } - tcph = (void *)skb_network_header(skb) + tcphoff; + tcph = (void *)skb->data + tcphoff; tcph->dest = cp->dport; /* diff --git a/net/netfilter/ipvs/ip_vs_proto_udp.c b/net/netfilter/ipvs/ip_vs_proto_udp.c index de3597347542..f32785682402 100644 --- a/net/netfilter/ipvs/ip_vs_proto_udp.c +++ b/net/netfilter/ipvs/ip_vs_proto_udp.c @@ -170,7 +170,7 @@ udp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, payload_csum = true; } - udph = (void *)skb_network_header(skb) + udphoff; + udph = (void *)skb->data + udphoff; udph->source = cp->vport; /* @@ -254,7 +254,7 @@ udp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, payload_csum = true; } - udph = (void *)skb_network_header(skb) + udphoff; + udph = (void *)skb->data + udphoff; udph->dest = cp->dport; /* diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c index 9fef4335da13..c23401c789de 100644 --- a/net/netfilter/ipvs/ip_vs_xmit.c +++ b/net/netfilter/ipvs/ip_vs_xmit.c @@ -1502,8 +1502,9 @@ tx_error: */ int ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, - struct ip_vs_protocol *pp, int offset, unsigned int hooknum, - struct ip_vs_iphdr *iph) + struct ip_vs_protocol *pp, unsigned int toff, + unsigned int wlen, unsigned int hooknum, + struct ip_vs_iphdr *ciph) { struct rtable *rt; /* Route to the other host */ int rc; @@ -1515,7 +1516,7 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, translate address/port back */ if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ) { if (cp->packet_xmit) - rc = cp->packet_xmit(skb, cp, pp, iph); + rc = cp->packet_xmit(skb, cp, pp, ciph); else rc = NF_ACCEPT; /* do not touch skb anymore */ @@ -1533,7 +1534,7 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, IP_VS_RT_MODE_LOCAL | IP_VS_RT_MODE_NON_LOCAL | IP_VS_RT_MODE_RDR : IP_VS_RT_MODE_NON_LOCAL; local = __ip_vs_get_out_rt(cp->ipvs, cp->af, skb, cp->dest, cp->daddr.ip, rt_mode, - NULL, iph); + NULL, ciph); if (local < 0) goto tx_error; rt = skb_rtable(skb); @@ -1565,13 +1566,13 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, } /* copy-on-write the packet before mangling it */ - if (skb_ensure_writable(skb, offset)) + if (skb_ensure_writable(skb, wlen)) goto tx_error; if (skb_cow(skb, rt->dst.dev->hard_header_len)) goto tx_error; - ip_vs_nat_icmp(skb, pp, cp, 0); + ip_vs_nat_icmp(skb, pp, cp, 0, toff); /* Another hack: avoid icmp_send in ip_fragment */ skb->ignore_df = 1; @@ -1587,8 +1588,9 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, #ifdef CONFIG_IP_VS_IPV6 int ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, - struct ip_vs_protocol *pp, int offset, unsigned int hooknum, - struct ip_vs_iphdr *ipvsh) + struct ip_vs_protocol *pp, unsigned int toff, + unsigned int wlen, unsigned int hooknum, + struct ip_vs_iphdr *ciph) { struct rt6_info *rt; /* Route to the other host */ int rc; @@ -1600,7 +1602,7 @@ ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, translate address/port back */ if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ) { if (cp->packet_xmit) - rc = cp->packet_xmit(skb, cp, pp, ipvsh); + rc = cp->packet_xmit(skb, cp, pp, ciph); else rc = NF_ACCEPT; /* do not touch skb anymore */ @@ -1617,7 +1619,7 @@ ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, IP_VS_RT_MODE_LOCAL | IP_VS_RT_MODE_NON_LOCAL | IP_VS_RT_MODE_RDR : IP_VS_RT_MODE_NON_LOCAL; local = __ip_vs_get_out_rt_v6(cp->ipvs, cp->af, skb, cp->dest, - &cp->daddr.in6, NULL, ipvsh, 0, rt_mode); + &cp->daddr.in6, NULL, ciph, 0, rt_mode); if (local < 0) goto tx_error; rt = dst_rt6_info(skb_dst(skb)); @@ -1649,13 +1651,13 @@ ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, } /* copy-on-write the packet before mangling it */ - if (skb_ensure_writable(skb, offset)) + if (skb_ensure_writable(skb, wlen)) goto tx_error; if (skb_cow(skb, rt->dst.dev->hard_header_len)) goto tx_error; - ip_vs_nat_icmp_v6(skb, pp, cp, 0); + ip_vs_nat_icmp_v6(skb, pp, cp, 0, toff, ciph); /* Another hack: avoid icmp_send in ip_fragment */ skb->ignore_df = 1; -- cgit v1.2.3 From 342e24a339b90e8e339a0f8c151ca479b8565661 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Wed, 22 Jul 2026 13:15:17 +0300 Subject: ipvs: do not mangle ICMP replies for non-first fragments Sashiko warns that ip_vs_nat_icmp() unconditionally mangles the payload for embedded non-first IPv4 fragments. The problem is in the very old inverted pp->dont_defrag check which should not continue when embedded is a non-first TCP/UDP/SCTP fragment. Check for embedded non-first fragment is also missing from ip_vs_out_icmp_v6(), it is needed before any connection lookups that expect ports after the network headers. Drop the blocking code from ip_vs_in_icmp_v6() which prevents ICMPv6 from local clients to use non-MASQ forwarding. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://sashiko.dev/#/patchset/20260720201122.79882-1-ja%40ssi.bg Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- include/net/ip_vs.h | 11 ++++---- net/netfilter/ipvs/ip_vs_core.c | 61 ++++++++++++++--------------------------- net/netfilter/ipvs/ip_vs_xmit.c | 28 +++++++++++++++---- 3 files changed, 48 insertions(+), 52 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 4a10a01d6e2f..e6ca930a3507 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -1975,8 +1975,7 @@ int ip_vs_dr_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, struct ip_vs_iphdr *iph); int ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, unsigned int toff, - unsigned int wlen, unsigned int hooknum, - struct ip_vs_iphdr *ciph); + unsigned int hooknum, struct ip_vs_iphdr *ciph); void ip_vs_dest_dst_rcu_free(struct rcu_head *head); #ifdef CONFIG_IP_VS_IPV6 @@ -1990,8 +1989,7 @@ int ip_vs_dr_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, struct ip_vs_iphdr *iph); int ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, unsigned int toff, - unsigned int wlen, unsigned int hooknum, - struct ip_vs_iphdr *ciph); + unsigned int hooknum, struct ip_vs_iphdr *ciph); #endif #ifdef CONFIG_SYSCTL @@ -2063,12 +2061,13 @@ static inline bool ip_vs_conn_use_hash2(struct ip_vs_conn *cp) } void ip_vs_nat_icmp(struct sk_buff *skb, struct ip_vs_protocol *pp, - struct ip_vs_conn *cp, int dir, unsigned int toff); + struct ip_vs_conn *cp, int dir, unsigned int toff, + bool has_ports); #ifdef CONFIG_IP_VS_IPV6 void ip_vs_nat_icmp_v6(struct sk_buff *skb, struct ip_vs_protocol *pp, struct ip_vs_conn *cp, int dir, unsigned int toff, - struct ip_vs_iphdr *ciph); + bool has_ports, struct ip_vs_iphdr *ciph); #endif static inline __wsum ip_vs_check_diff4(__be32 old, __be32 new, __wsum oldsum) diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index cd5eb71543ec..7efa209a517b 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -924,7 +924,8 @@ static int ip_vs_route_me_harder(struct netns_ipvs *ipvs, int af, * - inout: 1=in->out, 0=out->in */ void ip_vs_nat_icmp(struct sk_buff *skb, struct ip_vs_protocol *pp, - struct ip_vs_conn *cp, int inout, unsigned int toff) + struct ip_vs_conn *cp, int inout, unsigned int toff, + bool has_ports) { struct iphdr *iph = ip_hdr(skb); struct icmphdr *icmph = (struct icmphdr *)(skb->data + toff); @@ -944,8 +945,7 @@ void ip_vs_nat_icmp(struct sk_buff *skb, struct ip_vs_protocol *pp, } /* the TCP/UDP/SCTP port */ - if (IPPROTO_TCP == ciph->protocol || IPPROTO_UDP == ciph->protocol || - IPPROTO_SCTP == ciph->protocol) { + if (has_ports) { __be16 *ports = (void *)ciph + ciph->ihl*4; if (inout) @@ -970,18 +970,15 @@ void ip_vs_nat_icmp(struct sk_buff *skb, struct ip_vs_protocol *pp, #ifdef CONFIG_IP_VS_IPV6 void ip_vs_nat_icmp_v6(struct sk_buff *skb, struct ip_vs_protocol *pp, struct ip_vs_conn *cp, int inout, unsigned int toff, - struct ip_vs_iphdr *ciph) + bool has_ports, struct ip_vs_iphdr *ciph) { struct ipv6hdr *iph = ipv6_hdr(skb); - int protocol; struct icmp6hdr *icmph; struct ipv6hdr *cih; icmph = (struct icmp6hdr *)(skb->data + toff); cih = (struct ipv6hdr *)(skb->data + ciph->off); - protocol = ciph->protocol; - if (inout) { iph->saddr = cp->vaddr.in6; cih->daddr = cp->vaddr.in6; @@ -991,9 +988,7 @@ void ip_vs_nat_icmp_v6(struct sk_buff *skb, struct ip_vs_protocol *pp, } /* the TCP/UDP/SCTP port */ - if (!ciph->fragoffs && - (protocol == IPPROTO_TCP || protocol == IPPROTO_UDP || - protocol == IPPROTO_SCTP)) { + if (has_ports) { __be16 *ports = (void *)(skb->data + ciph->len); IP_VS_DBG(11, "%s() changed port %d to %d\n", __func__, @@ -1035,6 +1030,7 @@ static int handle_response_icmp(int af, struct sk_buff *skb, int iproto = af == AF_INET6 ? IPPROTO_ICMPV6 : IPPROTO_ICMP; unsigned int verdict = NF_DROP; unsigned int ctoff = ciph->len; + bool has_ports = false; if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ) goto after_nat; @@ -1048,17 +1044,19 @@ static int handle_response_icmp(int af, struct sk_buff *skb, } if (ciph->protocol == IPPROTO_TCP || ciph->protocol == IPPROTO_UDP || - ciph->protocol == IPPROTO_SCTP) + ciph->protocol == IPPROTO_SCTP) { ctoff += 2 * sizeof(__u16); + has_ports = true; + } if (skb_ensure_writable(skb, ctoff)) goto out; #ifdef CONFIG_IP_VS_IPV6 if (af == AF_INET6) - ip_vs_nat_icmp_v6(skb, pp, cp, 1, toff, ciph); + ip_vs_nat_icmp_v6(skb, pp, cp, 1, toff, has_ports, ciph); else #endif - ip_vs_nat_icmp(skb, pp, cp, 1, toff); + ip_vs_nat_icmp(skb, pp, cp, 1, toff, has_ports); if (ip_vs_route_me_harder(cp->ipvs, af, skb, hooknum)) goto out; @@ -1142,8 +1140,7 @@ static int ip_vs_out_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, return NF_ACCEPT; /* Is the embedded protocol header present? */ - if (unlikely(cih->frag_off & htons(IP_OFFSET) && - pp->dont_defrag)) + if (unlikely(cih->frag_off & htons(IP_OFFSET) && !pp->dont_defrag)) return NF_ACCEPT; IP_VS_DBG_PKT(11, AF_INET, pp, skb, offset, @@ -1207,6 +1204,10 @@ static int ip_vs_out_icmp_v6(struct netns_ipvs *ipvs, struct sk_buff *skb, if (!pp) return NF_ACCEPT; + /* Is the embedded protocol header present? */ + if (unlikely(ciph.fragoffs && !pp->dont_defrag)) + return NF_ACCEPT; + /* The embedded headers contain source and dest in reverse order */ cp = INDIRECT_CALL_1(pp->conn_out_get, ip_vs_conn_out_get_proto, ipvs, AF_INET6, skb, &ciph); @@ -1865,8 +1866,7 @@ ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related, pp = pd->pp; /* Is the embedded protocol header present? */ - if (unlikely(cih->frag_off & htons(IP_OFFSET) && - pp->dont_defrag)) + if (unlikely(cih->frag_off & htons(IP_OFFSET) && !pp->dont_defrag)) return NF_ACCEPT; IP_VS_DBG_PKT(11, AF_INET, pp, skb, offset, @@ -1874,7 +1874,6 @@ ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related, offset2 = offset; ip_vs_fill_iph_skb_icmp(AF_INET, skb, offset, !tunnel, &ciph); - offset = ciph.len; /* The embedded headers contain source and dest in reverse order. * For IPIP/UDP/GRE tunnel this is error for request, not for reply. @@ -1968,11 +1967,7 @@ ignore_tunnel: /* do the statistics and put it back */ ip_vs_in_stats(cp, skb); - if (IPPROTO_TCP == cih->protocol || IPPROTO_UDP == cih->protocol || - IPPROTO_SCTP == cih->protocol) - offset += 2 * sizeof(__u16); - verdict = ip_vs_icmp_xmit(skb, cp, pp, iph->len, offset, hooknum, - &ciph); + verdict = ip_vs_icmp_xmit(skb, cp, pp, iph->len, hooknum, &ciph); out: if (likely(!new_cp)) @@ -2032,8 +2027,8 @@ static int ip_vs_in_icmp_v6(struct netns_ipvs *ipvs, struct sk_buff *skb, return NF_ACCEPT; pp = pd->pp; - /* Cannot handle fragmented embedded protocol */ - if (ciph.fragoffs) + /* Is the embedded protocol header present? */ + if (ciph.fragoffs && !pp->dont_defrag) return NF_ACCEPT; IP_VS_DBG_PKT(11, AF_INET6, pp, skb, offset, @@ -2057,13 +2052,6 @@ static int ip_vs_in_icmp_v6(struct netns_ipvs *ipvs, struct sk_buff *skb, new_cp = true; } - /* VS/TUN, VS/DR and LOCALNODE just let it go */ - if ((hooknum == NF_INET_LOCAL_OUT) && - (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ)) { - verdict = NF_ACCEPT; - goto out; - } - verdict = NF_DROP; /* Ensure the checksum is correct */ @@ -2079,14 +2067,7 @@ static int ip_vs_in_icmp_v6(struct netns_ipvs *ipvs, struct sk_buff *skb, /* do the statistics and put it back */ ip_vs_in_stats(cp, skb); - /* Need to mangle contained IPv6 header in ICMPv6 packet */ - offset = ciph.len; - if (IPPROTO_TCP == ciph.protocol || IPPROTO_UDP == ciph.protocol || - IPPROTO_SCTP == ciph.protocol) - offset += 2 * sizeof(__u16); /* Also mangle ports */ - - verdict = ip_vs_icmp_xmit_v6(skb, cp, pp, iph->len, offset, hooknum, - &ciph); + verdict = ip_vs_icmp_xmit_v6(skb, cp, pp, iph->len, hooknum, &ciph); out: if (likely(!new_cp)) diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c index c23401c789de..0b0c5304993a 100644 --- a/net/netfilter/ipvs/ip_vs_xmit.c +++ b/net/netfilter/ipvs/ip_vs_xmit.c @@ -1503,13 +1503,14 @@ tx_error: int ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, unsigned int toff, - unsigned int wlen, unsigned int hooknum, - struct ip_vs_iphdr *ciph) + unsigned int hooknum, struct ip_vs_iphdr *ciph) { struct rtable *rt; /* Route to the other host */ int rc; int local; int rt_mode, was_input; + bool has_ports = false; + unsigned int wlen; /* The ICMP packet for VS/TUN, VS/DR and LOCALNODE will be forwarded directly here, because there is no need to @@ -1565,6 +1566,13 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, goto tx_error; } + wlen = ciph->len; + if (ciph->protocol == IPPROTO_TCP || ciph->protocol == IPPROTO_UDP || + ciph->protocol == IPPROTO_SCTP) { + wlen += 2 * sizeof(__u16); /* Also mangle ports */ + has_ports = true; + } + /* copy-on-write the packet before mangling it */ if (skb_ensure_writable(skb, wlen)) goto tx_error; @@ -1572,7 +1580,7 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, if (skb_cow(skb, rt->dst.dev->hard_header_len)) goto tx_error; - ip_vs_nat_icmp(skb, pp, cp, 0, toff); + ip_vs_nat_icmp(skb, pp, cp, 0, toff, has_ports); /* Another hack: avoid icmp_send in ip_fragment */ skb->ignore_df = 1; @@ -1589,10 +1597,11 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp, int ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, unsigned int toff, - unsigned int wlen, unsigned int hooknum, - struct ip_vs_iphdr *ciph) + unsigned int hooknum, struct ip_vs_iphdr *ciph) { + bool has_ports = false; struct rt6_info *rt; /* Route to the other host */ + unsigned int wlen; int rc; int local; int rt_mode; @@ -1650,6 +1659,13 @@ ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, goto tx_error; } + wlen = ciph->len; + if (ciph->protocol == IPPROTO_TCP || ciph->protocol == IPPROTO_UDP || + ciph->protocol == IPPROTO_SCTP) { + wlen += 2 * sizeof(__u16); /* Also mangle ports */ + has_ports = true; + } + /* copy-on-write the packet before mangling it */ if (skb_ensure_writable(skb, wlen)) goto tx_error; @@ -1657,7 +1673,7 @@ ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, if (skb_cow(skb, rt->dst.dev->hard_header_len)) goto tx_error; - ip_vs_nat_icmp_v6(skb, pp, cp, 0, toff, ciph); + ip_vs_nat_icmp_v6(skb, pp, cp, 0, toff, has_ports, ciph); /* Another hack: avoid icmp_send in ip_fragment */ skb->ignore_df = 1; -- cgit v1.2.3 From da7d894c41d5910daae2b8ffa024c52ff0a4df6a Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Wed, 22 Jul 2026 13:25:39 +0300 Subject: ipvs: clear the nfct flag under lock Sashiko warns that cp->flags should be changed under cp->lock Fixes: 35dfb013149f ("ipvs: queue delayed work to expire no destination connections if expire_nodest_conn=1") Fixes: f0a5e4d7a594 ("ipvs: allow connection reuse for unconfirmed conntrack") Link: https://sashiko.dev/#/patchset/CALMqdkR704S2BG_QD_bgHTFp2%2B1QCi7n0T4zoZyTo8mDZevYSA%40mail.gmail.com Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_core.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 7efa209a517b..6b79e0c4d9e2 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -2194,8 +2194,11 @@ ip_vs_in_hook(void *priv, struct sk_buff *skb, const struct nf_hook_state *state } if (resched) { - if (!old_ct) + if (!old_ct) { + spin_lock_bh(&cp->lock); cp->flags &= ~IP_VS_CONN_F_NFCT; + spin_unlock_bh(&cp->lock); + } if (!atomic_read(&cp->n_control)) ip_vs_conn_expire_now(cp); __ip_vs_conn_put(cp); @@ -2211,8 +2214,11 @@ ip_vs_in_hook(void *priv, struct sk_buff *skb, const struct nf_hook_state *state if (sysctl_expire_nodest_conn(ipvs)) { bool old_ct = ip_vs_conn_uses_old_conntrack(cp, skb); - if (!old_ct) + if (!old_ct) { + spin_lock_bh(&cp->lock); cp->flags &= ~IP_VS_CONN_F_NFCT; + spin_unlock_bh(&cp->lock); + } ip_vs_conn_expire_now(cp); __ip_vs_conn_put(cp); -- cgit v1.2.3 From 39e88f28fb32bf02bd4b525c24c842c9cff5663d Mon Sep 17 00:00:00 2001 From: "Xiang Mei (Microsoft)" Date: Sun, 19 Jul 2026 22:15:23 +0000 Subject: netfilter: nft_payload: fix mask build for partial field offload nft_payload_offload_mask() builds the offload match mask for a payload expression that covers only part of a header field. For a partial IPv6 address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which is undefined on the 32-bit int operand. It also trims only one word, so the remaining words stay 0xffffffff (and when priv_len is a multiple of 4 the trim is skipped entirely), leaving the mask covering more bytes than the rule matches. UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20 shift exponent 120 is too large for 32-bit type 'int' ... The match is byte-granular and struct nft_data is zero-initialised, so the correct mask is simply the first priv_len bytes set to 0xff. Set those bytes directly and drop the word/shift trimming; this removes the undefined shift and no longer over-masks the trailing bytes. Fixes: a5d45bc0dc50 ("netfilter: nftables_offload: build mask based from the matching bytes") Reported-by: AutonomousCodeSecurity@microsoft.com Signed-off-by: Xiang Mei (Microsoft) Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_payload.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c index 391539a1ceaa..8a4472fd77d9 100644 --- a/net/netfilter/nft_payload.c +++ b/net/netfilter/nft_payload.c @@ -259,9 +259,7 @@ nla_put_failure: static bool nft_payload_offload_mask(struct nft_offload_reg *reg, u32 priv_len, u32 field_len) { - unsigned int remainder, delta, k; struct nft_data mask = {}; - __be32 remainder_mask; if (priv_len == field_len) { memset(®->mask, 0xff, priv_len); @@ -270,15 +268,7 @@ static bool nft_payload_offload_mask(struct nft_offload_reg *reg, return false; } - memset(&mask, 0xff, field_len); - remainder = priv_len % sizeof(u32); - if (remainder) { - k = priv_len / sizeof(u32); - delta = field_len - priv_len; - remainder_mask = htonl(~((1 << (delta * BITS_PER_BYTE)) - 1)); - mask.data[k] = (__force u32)remainder_mask; - } - + memset(&mask, 0xff, priv_len); memcpy(®->mask, &mask, field_len); return true; -- cgit v1.2.3 From af421e9aed3920c7ac88c24daa48606c7112feca Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Mon, 22 Jun 2026 08:47:22 -0400 Subject: um: vector: fix use-after-free in vector_mmsg_rx() When vector_mmsg_rx() discards a packet whose overlay header fails verify_header(), it frees the skb and continues the loop: if (header_check < 0) { dev_kfree_skb_irq(skb); vp->estats.rx_encaps_errors++; continue; } The normal and short-packet paths fall through to the bottom of the loop body, which clears the consumed slot and advances the cursors: (*skbuff_vector) = NULL; mmsg_vector++; skbuff_vector++; The verify_header() < 0 path skips that via continue, so the freed skb is left in skbuff_vector[] and the cursors do not advance. The next iteration reads the same slot, gets the freed skb, and frees it again, producing a refcount underflow / use-after-free in the RX path. Discard the slot the same way the other paths do before continuing. Only transports whose verify_header() can return negative are affected: GRE and L2TPv3 do so on a cookie/session-id mismatch (raw/tap do not), so any peer on such a transport can trigger it without authentication. Fixes: 49da7e64f33e ("High Performance UML Vector Network Driver") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Signed-off-by: Richard Weinberger --- arch/um/drivers/vector_kern.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/um/drivers/vector_kern.c b/arch/um/drivers/vector_kern.c index 2cc90055499a..8a70b3a62553 100644 --- a/arch/um/drivers/vector_kern.c +++ b/arch/um/drivers/vector_kern.c @@ -995,6 +995,9 @@ static int vector_mmsg_rx(struct vector_private *vp, int budget) */ dev_kfree_skb_irq(skb); vp->estats.rx_encaps_errors++; + (*skbuff_vector) = NULL; + mmsg_vector++; + skbuff_vector++; continue; } if (header_check > 0) { -- cgit v1.2.3 From 6a50332e194f58b562d396ab772c34e8c9890c0f Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 22 Jul 2026 11:34:57 +0100 Subject: ASoC: SDCA: Correct pointer passed to devm_acpi_table_put devm_acpi_table_put() takes a struct acpi_table_header * but the value passed in is struct acpi_table_header ** so the value passed to acpi_put_table() is actually the pointer not the table itself. Remove the extra reference to correct the passed value. Fixes: c4d096c3ca42 ("ASoC: SDCA: Add SDCA FDL data parsing") Signed-off-by: Charles Keepax Reviewed-by: Pierre-Louis Bossart Link: https://patch.msgid.link/20260722103500.872714-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/sdca/sdca_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sdca/sdca_device.c b/sound/soc/sdca/sdca_device.c index 405e80b979de..4bcd8d1fdff8 100644 --- a/sound/soc/sdca/sdca_device.c +++ b/sound/soc/sdca/sdca_device.c @@ -43,7 +43,7 @@ void sdca_lookup_swft(struct sdw_slave *slave) dev_info(&slave->dev, "SWFT not available\n"); else devm_add_action_or_reset(&slave->dev, devm_acpi_table_put, - &slave->sdca_data.swft); + slave->sdca_data.swft); } EXPORT_SYMBOL_NS(sdca_lookup_swft, "SND_SOC_SDCA"); -- cgit v1.2.3 From 7f64ccc374b2fe1f6a169182e95ab8e104cae406 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 22 Jul 2026 11:34:58 +0100 Subject: ASoC: SDCA: Always free firmware in FDL path In the case a disk firmware exists but is invalid and no SWFT firmware exists fdl_load_file() will return without calling release_firmware(). Update the code to call this to ensure the firmware is released on the error path. Fixes: 71f7990a34cd ("ASoC: SDCA: Add FDL library for XU entities") Signed-off-by: Charles Keepax Reviewed-by: Pierre-Louis Bossart Link: https://patch.msgid.link/20260722103500.872714-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/sdca/sdca_fdl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/sdca/sdca_fdl.c b/sound/soc/sdca/sdca_fdl.c index 994821a6df61..60fdd406220d 100644 --- a/sound/soc/sdca/sdca_fdl.c +++ b/sound/soc/sdca/sdca_fdl.c @@ -258,7 +258,8 @@ static int fdl_load_file(struct sdca_interrupt *interrupt, if (!swf) { dev_err(dev, "failed to locate SWF\n"); - return -ENOENT; + ret = -ENOENT; + goto error; } dev_info(dev, "loading SWF: %x-%x-%x\n", @@ -270,6 +271,8 @@ static int fdl_load_file(struct sdca_interrupt *interrupt, SDCA_CTL_XU_FDL_MESSAGEOFFSET, fdl_file->fdl_offset, SDCA_CTL_XU_FDL_MESSAGELENGTH, swf->data, swf->file_length - offsetof(struct acpi_sw_file, data)); + +error: release_firmware(firmware); return ret; } -- cgit v1.2.3 From 556d872e7c2a0b570c5b0974813847ef0d0cd637 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 22 Jul 2026 11:34:59 +0100 Subject: ASoC: SDCA: Make UMP message size check more robust If message offset was larger than the buffer length the size check will pass incorrectly. Refactor the check such that it is more robust to invalid sizes. Fixes: daab108504be ("ASoC: SDCA: Add UMP buffer helper functions") Signed-off-by: Charles Keepax Reviewed-by: Pierre-Louis Bossart Link: https://patch.msgid.link/20260722103500.872714-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/sdca/sdca_ump.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/sdca/sdca_ump.c b/sound/soc/sdca/sdca_ump.c index a86bb28c6d0a..82a8bf75bbca 100644 --- a/sound/soc/sdca/sdca_ump.c +++ b/sound/soc/sdca/sdca_ump.c @@ -141,7 +141,7 @@ int sdca_ump_read_message(struct device *dev, return ret; } - if (msg_len > buf_len - msg_offset) { + if (msg_offset + msg_len > buf_len) { dev_err(dev, "%s: message too big for UMP buffer: %d\n", entity->label, msg_len); return -EINVAL; @@ -207,7 +207,7 @@ int sdca_ump_write_message(struct device *dev, buf_len = sdca_range(range, SDCA_MESSAGEOFFSET_BUFFER_LENGTH, 0); ump_mode = sdca_range(range, SDCA_MESSAGEOFFSET_UMP_MODE, 0); - if (msg_len > buf_len - msg_offset) { + if (msg_offset + msg_len > buf_len) { dev_err(dev, "%s: message too big for UMP buffer: %d\n", entity->label, msg_len); return -EINVAL; -- cgit v1.2.3 From 951e921b039b793bef7050eaf5c5fb1a4a5341d1 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 22 Jul 2026 11:35:00 +0100 Subject: ASoC: SDCA: Ensure that Control Range is large enough for header When reading the Ranges structure from an SDCA Control, ensure that the read data is large enough to encompass the required header before accessing it. Fixes: 64fb5af1d1bb ("ASoC: SDCA: Add parsing for Control range structures") Signed-off-by: Charles Keepax Reviewed-by: Pierre-Louis Bossart Link: https://patch.msgid.link/20260722103500.872714-5-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/sdca/sdca_functions.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/sdca/sdca_functions.c b/sound/soc/sdca/sdca_functions.c index 77940bd6b33c..7a7a9f1a4938 100644 --- a/sound/soc/sdca/sdca_functions.c +++ b/sound/soc/sdca/sdca_functions.c @@ -855,6 +855,8 @@ static int find_sdca_control_range(struct device *dev, return 0; else if (num_range < 0) return num_range; + else if (num_range < 2 * sizeof(*limits)) + return -EINVAL; range_list = devm_kcalloc(dev, num_range, sizeof(*range_list), GFP_KERNEL); if (!range_list) -- cgit v1.2.3 From 78f75d632f74b8de0f081a128588f7c37d0d1164 Mon Sep 17 00:00:00 2001 From: Xiang Mei Date: Wed, 22 Jul 2026 14:02:03 -0700 Subject: rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check() rds_tcp_laddr_check() looks up a scoped IPv6 interface with dev_get_by_index_rcu(), drops the RCU read-side lock, and only then passes the bare struct net_device * into ipv6_chk_addr(). dev_get_by_index_rcu() only keeps the device alive within the same RCU read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can free the net_device; ipv6_chk_addr() then dereferences the stale pointer in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading freed memory. Keep the RCU read-side lock held across the ipv6_chk_addr() call instead of dropping it right after the lookup, so the device cannot be freed while it is in use. BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) Read of size 8 at addr ffff8880106ec000 by task exploit/153 Call Trace: ... kasan_report (mm/kasan/report.c:595) __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972) rds_tcp_laddr_check (net/rds/tcp.c:370) rds_bind (net/rds/bind.c:248) __sys_bind (net/socket.c:1920) __x64_sys_bind (net/socket.c:1956) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Fixes: eee2fa6ab322 ("rds: Changing IP address internal representation to struct in6_addr") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Reviewed-by: Allison Henderson Link: https://patch.msgid.link/20260722210203.565803-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski --- net/rds/tcp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/rds/tcp.c b/net/rds/tcp.c index 5de35d556f29..b263634ac750 100644 --- a/net/rds/tcp.c +++ b/net/rds/tcp.c @@ -355,23 +355,25 @@ int rds_tcp_laddr_check(struct net *net, const struct in6_addr *addr, /* If the scope_id is specified, check only those addresses * hosted on the specified interface. */ + rcu_read_lock(); if (scope_id != 0) { - rcu_read_lock(); dev = dev_get_by_index_rcu(net, scope_id); /* scope_id is not valid... */ if (!dev) { rcu_read_unlock(); return -EADDRNOTAVAIL; } - rcu_read_unlock(); } #if IS_ENABLED(CONFIG_IPV6) if (ipv6_mod_enabled()) { ret = ipv6_chk_addr(net, addr, dev, 0); - if (ret) + if (ret) { + rcu_read_unlock(); return 0; + } } #endif + rcu_read_unlock(); return -EADDRNOTAVAIL; } -- cgit v1.2.3 From 52a3a0cc28bf6fd8b38ef6c81b21f948bf13996a Mon Sep 17 00:00:00 2001 From: Balamurugan C Date: Thu, 23 Jul 2026 14:21:21 +0800 Subject: ASoC: Intel: soc-acpi: Add entry for sof_rt5682 in NVL match table. Adding rt5682 I2S codec support for NVL platforms and entry in match table. Signed-off-by: Balamurugan C Signed-off-by: Bard Liao Link: https://patch.msgid.link/20260723062121.869857-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/common/soc-acpi-intel-nvl-match.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/intel/common/soc-acpi-intel-nvl-match.c b/sound/soc/intel/common/soc-acpi-intel-nvl-match.c index 217272260803..a7f4097d426c 100644 --- a/sound/soc/intel/common/soc-acpi-intel-nvl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-nvl-match.c @@ -8,6 +8,7 @@ #include #include +#include #include "soc-acpi-intel-sdw-mockup-match.h" static const struct snd_soc_acpi_codecs nvl_essx_83x6 = { @@ -15,6 +16,11 @@ static const struct snd_soc_acpi_codecs nvl_essx_83x6 = { .codecs = { "ESSX8316", "ESSX8326", "ESSX8336"}, }; +static const struct snd_soc_acpi_codecs nvl_rt5682_rt5682s_hp = { + .num_codecs = 2, + .codecs = {RT5682_ACPI_HID, RT5682S_ACPI_HID}, +}; + struct snd_soc_acpi_mach snd_soc_acpi_intel_nvl_machines[] = { { .comp_ids = &nvl_essx_83x6, @@ -24,6 +30,13 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_nvl_machines[] = { SND_SOC_ACPI_TPLG_INTEL_SSP_MSB | SND_SOC_ACPI_TPLG_INTEL_DMIC_NUMBER, }, + { + .comp_ids = &nvl_rt5682_rt5682s_hp, + .drv_name = "sof_rt5682", + .sof_tplg_filename = "sof-nvl-rt5682", /* the tplg suffix is added at run time */ + .tplg_quirk_mask = SND_SOC_ACPI_TPLG_INTEL_SSP_NUMBER | + SND_SOC_ACPI_TPLG_INTEL_SSP_MSB, + }, {}, }; EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_nvl_machines); -- cgit v1.2.3 From d8a0962d3506f7c9fdc3cc49c81ff0b8ded09f2f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 16 Jul 2026 15:21:03 +0200 Subject: drm/mediatek: mtk_hdmi_common: take i2c adapter module reference The i2c subsystem currently blocks during adapter deregistration whenever there are consumers holding a reference. Switch to using of_get_i2c_adapter_by_node() which also takes a reference to the adapter module so that an attempt to unload the module while in use fails gracefully instead of blocking uninterruptibly. Signed-off-by: Johan Hovold Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260716132103.1564995-1-johan@kernel.org/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_hdmi_common.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c index a049489daa2d..042b98e5a519 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c @@ -290,6 +290,13 @@ static int mtk_hdmi_get_cec_dev(struct mtk_hdmi *hdmi, struct device *dev, struc return 0; } +static void mtk_hdmi_put_adapter(void *_adap) +{ + struct i2c_adapter *adap = _adap; + + i2c_put_adapter(adap); +} + static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi, struct platform_device *pdev, const char * const *clk_names, size_t num_clocks) { @@ -328,12 +335,12 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi, struct platform_device if (!i2c_np) return dev_err_probe(dev, -EINVAL, "No ddc-i2c-bus in connector\n"); - hdmi->ddc_adpt = of_find_i2c_adapter_by_node(i2c_np); + hdmi->ddc_adpt = of_get_i2c_adapter_by_node(i2c_np); of_node_put(i2c_np); if (!hdmi->ddc_adpt) return dev_err_probe(dev, -EPROBE_DEFER, "Failed to get ddc i2c adapter by node\n"); - ret = devm_add_action_or_reset(dev, mtk_hdmi_put_device, &hdmi->ddc_adpt->dev); + ret = devm_add_action_or_reset(dev, mtk_hdmi_put_adapter, hdmi->ddc_adpt); if (ret) return ret; -- cgit v1.2.3 From 112badb7245059c176e3924f9cd9ce2933cb0082 Mon Sep 17 00:00:00 2001 From: Alessio Belle Date: Mon, 20 Jul 2026 16:07:28 +0100 Subject: drm/imagination: Fix value of HWRT address in pvr_job_create tracepoint The pvr_job_create tracepoint was using pvr_fw_object::fw_addr_offset to display the firmware address of the render target structure attached to a job, but that's an offset into the firmware heap, not the expected full address, which is more useful in general e.g. for cross referencing against firmware logs. Use pvr_fw_object_get_fw_addr() to get the full firmware address. Fixes: c1079aebb4de ("drm/imagination: Add support for trace points") Reviewed-by: Brajesh Gupta Link: https://patch.msgid.link/20260720-fix-pvr-job-trace-hwrt-v1-1-b24551802efb@imgtec.com Signed-off-by: Alessio Belle --- drivers/gpu/drm/imagination/pvr_trace.h | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/imagination/pvr_trace.h b/drivers/gpu/drm/imagination/pvr_trace.h index ffbbde3b2bcc..943d6b2418cb 100644 --- a/drivers/gpu/drm/imagination/pvr_trace.h +++ b/drivers/gpu/drm/imagination/pvr_trace.h @@ -41,6 +41,17 @@ TRACE_EVENT(pvr_job_submit_ioctl, __entry->count) ); +#define PVR_JOB_GET_HWRT_FW_ADDR(job) \ + ({ \ + struct pvr_job *_job = (job); \ + u32 _hwrt_fw_addr = 0; \ + \ + if (_job && _job->hwrt) \ + pvr_fw_object_get_fw_addr(_job->hwrt->fw_obj, &_hwrt_fw_addr); \ + \ + _hwrt_fw_addr; \ + }) + #define PVR_JOB_TYPE_TO_STR(val) \ __print_symbolic(val, \ { DRM_PVR_JOB_TYPE_GEOMETRY, "geometry" }, \ @@ -64,9 +75,7 @@ TRACE_EVENT(pvr_job_create, __entry->ctx = job->ctx; __entry->fw_obj = job->ctx->fw_obj; pvr_fw_object_get_fw_addr(job->ctx->fw_obj, &__entry->fw_addr); - __entry->hwrt_addr = job->hwrt ? - job->hwrt->fw_obj->fw_addr_offset : - 0; + __entry->hwrt_addr = PVR_JOB_GET_HWRT_FW_ADDR(job); __entry->job = job; __entry->job_type = job->type; __entry->sync_op_count = sync_op_count;), @@ -82,6 +91,7 @@ TRACE_EVENT(pvr_job_create, ); #undef PVR_JOB_TYPE_TO_STR +#undef PVR_JOB_GET_HWRT_FW_ADDR TRACE_EVENT(pvr_job_submit_fw, TP_PROTO(struct pvr_job *job), -- cgit v1.2.3 From 8fa01be5a6149404adb82c0979a78f6347edd3ef Mon Sep 17 00:00:00 2001 From: Farhan Ali Date: Thu, 23 Jul 2026 15:14:04 -0700 Subject: KVM: s390: pci: Reject adapter interrupt forwarding if already enabled The MPCIFC instruction doesn't allow registering adapter interrupts without first unregistering. So reject any request to enable interrupt forwarding if its already enabled for the zPCI device. This also fixes overwriting and thus leaking resources when the ioctl is called multiple times for the same device. Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger Reviewed-by: Matthew Rosato Signed-off-by: Farhan Ali Tested-by: Matthew Rosato Signed-off-by: Christian Borntraeger --- arch/s390/kvm/pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c index 720bb58cabe2..d2a11cdf6941 100644 --- a/arch/s390/kvm/pci.c +++ b/arch/s390/kvm/pci.c @@ -237,6 +237,10 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, if (zdev->gisa == 0) return -EINVAL; + /* AIF already enabled for the device */ + if (zdev->kzdev->fib.fmt0.aibv != 0) + return -EINVAL; + kvm = zdev->kzdev->kvm; msi_vecs = min_t(unsigned int, fib->fmt0.noi, zdev->max_msi); -- cgit v1.2.3 From 36f6999ecde3976731a8bfc0b8e667da6f593069 Mon Sep 17 00:00:00 2001 From: Farhan Ali Date: Thu, 23 Jul 2026 15:14:05 -0700 Subject: KVM: s390: pci: Fix memory accounting for pinned/unpinned pages The account_mem() and unaccount_mem() functions call get_uid() which increments the reference count of struct user_struct on every invocation. But we don't decrement the count by calling free_uid(). It also accounted/unaccounted the pages against the current->mm. But its possible the unaccount_mem() can be called from a different process context than the one that originally pinned the pages. Let's fix this by storing the pinning process user_struct and mm_struct when accounting for pinned pages, and subsequently free these resources when the pages are unpinned. Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger Reviewed-by: Matthew Rosato Signed-off-by: Farhan Ali Tested-by: Matthew Rosato [borntraeger@linux.ibm.com: Fixed whitespace] Signed-off-by: Christian Borntraeger --- arch/s390/kvm/pci.c | 43 ++++++++++++++++++++++++++++++++----------- arch/s390/kvm/pci.h | 2 ++ 2 files changed, 34 insertions(+), 11 deletions(-) diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c index d2a11cdf6941..0741aed442bc 100644 --- a/arch/s390/kvm/pci.c +++ b/arch/s390/kvm/pci.c @@ -190,33 +190,54 @@ static int kvm_zpci_clear_airq(struct zpci_dev *zdev) return cc ? -EIO : 0; } -static inline void unaccount_mem(unsigned long nr_pages) +static inline void unaccount_mem(struct kvm_zdev *kzdev, unsigned long nr_pages) { - struct user_struct *user = get_uid(current_user()); + struct user_struct *user = kzdev->user_account; + struct mm_struct *mm_account = kzdev->mm_account; - if (user) + if (user) { atomic_long_sub(nr_pages, &user->locked_vm); - if (current->mm) - atomic64_sub(nr_pages, ¤t->mm->pinned_vm); + free_uid(user); + kzdev->user_account = NULL; + } + + if (mm_account) { + atomic64_sub(nr_pages, &mm_account->pinned_vm); + mmdrop(mm_account); + kzdev->mm_account = NULL; + } } -static inline int account_mem(unsigned long nr_pages) +static inline int account_mem(struct kvm_zdev *kzdev, unsigned long nr_pages) { struct user_struct *user = get_uid(current_user()); unsigned long page_limit, cur_pages, new_pages; + int rc = 0; page_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT; cur_pages = atomic_long_read(&user->locked_vm); do { new_pages = cur_pages + nr_pages; - if (new_pages > page_limit) - return -ENOMEM; + if (new_pages > page_limit) { + rc = -ENOMEM; + goto out; + } } while (!atomic_long_try_cmpxchg(&user->locked_vm, &cur_pages, new_pages)); - atomic64_add(nr_pages, ¤t->mm->pinned_vm); + if (current->mm) { + mmgrab(current->mm); + atomic64_add(nr_pages, ¤t->mm->pinned_vm); + } + + kzdev->user_account = user; + kzdev->mm_account = current->mm; return 0; + +out: + free_uid(user); + return rc; } static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, @@ -279,7 +300,7 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, } /* Account for pinned pages, roll back on failure */ - if (account_mem(pcount)) + if (account_mem(zdev->kzdev, pcount)) goto unpin2; /* AISB must be allocated before we can fill in GAITE */ @@ -400,7 +421,7 @@ static int kvm_s390_pci_aif_disable(struct zpci_dev *zdev, bool force) pcount++; } if (pcount > 0) - unaccount_mem(pcount); + unaccount_mem(kzdev, pcount); out: mutex_unlock(&aift->aift_lock); diff --git a/arch/s390/kvm/pci.h b/arch/s390/kvm/pci.h index ff0972dd5e71..fdf8c7bf4ed0 100644 --- a/arch/s390/kvm/pci.h +++ b/arch/s390/kvm/pci.h @@ -22,6 +22,8 @@ struct kvm_zdev { struct kvm *kvm; struct zpci_fib fib; struct list_head entry; + struct user_struct *user_account; + struct mm_struct *mm_account; }; struct zpci_gaite { -- cgit v1.2.3 From f86842e4d6c482300f4567f492d512c9ccf5bc4f Mon Sep 17 00:00:00 2001 From: Farhan Ali Date: Thu, 23 Jul 2026 15:14:06 -0700 Subject: KVM: s390: pci: Fix missing error codes and memory unaccounting In kvm_s390_pci_aif_enable() two error paths failed to set an error code, causing the function to return 0 on failure. It also failed to rollback memory accounting on failure. Fix both by propagating an error code on failure and calling unaccount_mem() in the cleanup path. Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger Reviewed-by: Matthew Rosato Signed-off-by: Farhan Ali Tested-by: Matthew Rosato Signed-off-by: Christian Borntraeger --- arch/s390/kvm/pci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c index 0741aed442bc..36eb30953bb5 100644 --- a/arch/s390/kvm/pci.c +++ b/arch/s390/kvm/pci.c @@ -300,14 +300,17 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, } /* Account for pinned pages, roll back on failure */ - if (account_mem(zdev->kzdev, pcount)) + rc = account_mem(zdev->kzdev, pcount); + if (rc) goto unpin2; /* AISB must be allocated before we can fill in GAITE */ mutex_lock(&aift->aift_lock); bit = airq_iv_alloc_bit(aift->sbv); - if (bit == -1UL) + if (bit == -1UL) { + rc = -ENOMEM; goto unlock; + } zdev->aisb = bit; /* store the summary bit number */ zdev->aibv = airq_iv_create(msi_vecs, AIRQ_IV_DATA | AIRQ_IV_BITLOCK | @@ -351,6 +354,8 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, return rc; unlock: + if (pcount > 0) + unaccount_mem(zdev->kzdev, pcount); mutex_unlock(&aift->aift_lock); unpin2: if (fib->fmt0.sum == 1) -- cgit v1.2.3 From 8bf09b9b7d3232806df95f409581f8a9fd99a3fa Mon Sep 17 00:00:00 2001 From: Farhan Ali Date: Thu, 23 Jul 2026 15:14:07 -0700 Subject: KVM: s390: pci: Fix NULL dereference on AIBV allocation failure The airq_iv_create() can return NULL on failure, but the return value was never checked. If it fails, zdev->aibv will be NULL and fail when dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the previously allocated AISB bit and zdev->aisb on failure. Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger Reviewed-by: Matthew Rosato Signed-off-by: Farhan Ali Tested-by: Matthew Rosato Signed-off-by: Christian Borntraeger --- arch/s390/kvm/pci.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c index 36eb30953bb5..1eb127fc9f89 100644 --- a/arch/s390/kvm/pci.c +++ b/arch/s390/kvm/pci.c @@ -317,6 +317,11 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, AIRQ_IV_GUESTVEC, phys_to_virt(fib->fmt0.aibv)); + if (!zdev->aibv) { + rc = -ENOMEM; + goto free_aisb; + } + spin_lock_irq(&aift->gait_lock); gaite = aift->gait + zdev->aisb; @@ -353,6 +358,9 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, rc = kvm_zpci_set_airq(zdev); return rc; +free_aisb: + airq_iv_free_bit(aift->sbv, zdev->aisb); + zdev->aisb = 0; unlock: if (pcount > 0) unaccount_mem(zdev->kzdev, pcount); -- cgit v1.2.3 From 5580c9858f1e00f60191eb09c3add359836d60b6 Mon Sep 17 00:00:00 2001 From: Farhan Ali Date: Thu, 23 Jul 2026 15:14:08 -0700 Subject: KVM: s390: pci: Fix resource leak on IRQ registration failure Currently if kvm_zpci_set_airq() fails, kvm_s390_pci_aif_enable() returns the error code but doesn't do any resource cleanup thus leaking resources. Fix this by cleaning up all the resources such as the GAITE, AIBV, AISB and unpinning any pinned pages. While at it, remove dead code that stored FIB values that were never referenced. As part of the cleanup, we are also holding the aift_lock a bit longer, as we hold the lock while executing the MPCIFC instruction. Though this is not strictly necessary, it means we don't have to drop and re-acquire in the error case. Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato Reviewed-by: Christian Borntraeger Signed-off-by: Farhan Ali Tested-by: Matthew Rosato Signed-off-by: Christian Borntraeger --- arch/s390/kvm/pci.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c index 1eb127fc9f89..50f495bc8303 100644 --- a/arch/s390/kvm/pci.c +++ b/arch/s390/kvm/pci.c @@ -344,19 +344,32 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, aift->kzdev[zdev->aisb] = zdev->kzdev; spin_unlock_irq(&aift->gait_lock); - /* Update guest FIB for re-issue */ - fib->fmt0.aisbo = zdev->aisb & 63; - fib->fmt0.aisb = virt_to_phys(aift->sbv->vector) + (zdev->aisb / 64) * 8; - fib->fmt0.isc = gisc; - /* Save some guest fib values in the host for later use */ - zdev->kzdev->fib.fmt0.isc = fib->fmt0.isc; + zdev->kzdev->fib.fmt0.isc = gisc; zdev->kzdev->fib.fmt0.aibv = fib->fmt0.aibv; - mutex_unlock(&aift->aift_lock); /* Issue the clp to setup the irq now */ rc = kvm_zpci_set_airq(zdev); - return rc; + if (!rc) { + mutex_unlock(&aift->aift_lock); + return rc; + } + + /* Start cleanup */ + zdev->kzdev->fib.fmt0.isc = 0; + zdev->kzdev->fib.fmt0.aibv = 0; + + spin_lock_irq(&aift->gait_lock); + gaite->count--; + gaite->aisb = 0; + gaite->gisc = 0; + gaite->aisbo = 0; + gaite->gisa = 0; + aift->kzdev[zdev->aisb] = NULL; + spin_unlock_irq(&aift->gait_lock); + + airq_iv_release(zdev->aibv); + zdev->aibv = NULL; free_aisb: airq_iv_free_bit(aift->sbv, zdev->aisb); -- cgit v1.2.3 From 868d32ac72cba21c5c6d8a66a814b7c25a3a5c01 Mon Sep 17 00:00:00 2001 From: Farhan Ali Date: Thu, 23 Jul 2026 15:14:09 -0700 Subject: KVM: s390: pci: Validate AIBV and AISB before pinning guest pages The AIBV holds one bit per MSI-X vector for a given function. The size of the bit vector is derived from the NOI and the AIBVO. If the size of the AIBV exceeds a single page boundary, then reject the request as we cannot safely pin the guest AIBV. Similarly reject the request if the AISB address is not 8-byte aligned as the architecture requires doubleword alignment for the summary bit address. Since the AISBO can address up to 64 bits, the size of the AISB can only be 8 bytes for the function. This also ensures the AISB doesn't exceed a single page boundary. Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger Reviewed-by: Matthew Rosato Signed-off-by: Farhan Ali Tested-by: Matthew Rosato Signed-off-by: Christian Borntraeger --- arch/s390/kvm/pci.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c index 50f495bc8303..50f5ec79600e 100644 --- a/arch/s390/kvm/pci.c +++ b/arch/s390/kvm/pci.c @@ -244,7 +244,7 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, bool assist) { struct page *pages[1], *aibv_page, *aisb_page = NULL; - unsigned int msi_vecs, idx; + unsigned int msi_vecs, idx, size; struct zpci_gaite *gaite; unsigned long hva, bit; struct kvm *kvm; @@ -271,6 +271,14 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, return gisc; /* Replace AIBV address */ + size = BITS_TO_LONGS(msi_vecs + fib->fmt0.aibvo) * sizeof(unsigned long); + npages = DIV_ROUND_UP((fib->fmt0.aibv & ~PAGE_MASK) + size, PAGE_SIZE); + /* AIBV cannot span more than 1 page */ + if (npages > 1) { + rc = -EINVAL; + goto out; + } + idx = srcu_read_lock(&kvm->srcu); hva = gfn_to_hva(kvm, gpa_to_gfn((gpa_t)fib->fmt0.aibv)); npages = pin_user_pages_fast(hva, 1, FOLL_WRITE | FOLL_LONGTERM, pages); @@ -286,6 +294,12 @@ static int kvm_s390_pci_aif_enable(struct zpci_dev *zdev, struct zpci_fib *fib, /* Pin the guest AISB if one was specified */ if (fib->fmt0.sum == 1) { + /* AISB must be dword aligned */ + if (fib->fmt0.aisb & 0x7) { + rc = -EINVAL; + goto unpin1; + } + idx = srcu_read_lock(&kvm->srcu); hva = gfn_to_hva(kvm, gpa_to_gfn((gpa_t)fib->fmt0.aisb)); npages = pin_user_pages_fast(hva, 1, FOLL_WRITE | FOLL_LONGTERM, -- cgit v1.2.3 From acd8aa3c4b91a38c8521000790890bc9d1083f1d Mon Sep 17 00:00:00 2001 From: Markus Lindner Date: Wed, 22 Jul 2026 03:09:18 +0200 Subject: ALSA: usb-audio: Add dB map quirk for Razer Barracuda X 2.4 The Razer Barracuda X 2.4 GHz USB headset dongle (0x1532:0x0552) reports a minimum volume register value of cval->min = -16800. In UAC 1/256 dB units, -16800 corresponds to -65.625 dB. However, stock ALSA misinterprets this raw integer as 1/100 dB units (-168.00 dB), causing user-space audio servers (PipeWire / PulseAudio) to map their volume curves against an incorrectly wide range. Add an explicit usbmix_dB_map entry overriding Unit 2 to -6562 (-65.62 dB) to accurately report the physical hardware attenuation bounds. Signed-off-by: Markus Lindner Link: https://patch.msgid.link/AS8P195MB2142F4EFF83980BD02BA6566E1C12@AS8P195MB2142.EURP195.PROD.OUTLOOK.COM Signed-off-by: Takashi Iwai --- sound/usb/mixer_maps.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index faac7df1fbcf..4d8dca04f87d 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -344,6 +344,16 @@ static const struct usbmix_name_map bose_soundlink_map[] = { { 0 } /* terminator */ }; +/* + * Razer Barracuda X 2.4: Firmware reports cval->min = -16800 in 1/256 dB units + * (-65.62 dB), which stock ALSA misinterprets as a -168 dB floor + */ +static const struct usbmix_dB_map razer_barracuda_x_2_4_dB = {-6562, 0}; +static const struct usbmix_name_map razer_barracuda_x_2_4_map[] = { + { 2, NULL, .dB = &razer_barracuda_x_2_4_dB }, + { 0 } /* terminator */ +}; + /* Sennheiser Communications Headset [PC 8], the dB value is reported as -6 negative maximum */ static const struct usbmix_dB_map sennheiser_pc8_dB = {-9500, 0}; static const struct usbmix_name_map sennheiser_pc8_map[] = { @@ -689,6 +699,11 @@ static const struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x17aa, 0x1046), .map = lenovo_p620_rear_map, }, + { + /* Razer Barracuda X 2.4 */ + .id = USB_ID(0x1532, 0x0552), + .map = razer_barracuda_x_2_4_map, + }, { /* Sennheiser Communications Headset [PC 8] */ .id = USB_ID(0x1395, 0x0025), -- cgit v1.2.3 From a3caaa06809248b996254be5b47e10804a3494e2 Mon Sep 17 00:00:00 2001 From: Osama Abdelkader Date: Thu, 16 Jul 2026 16:39:38 +0200 Subject: drm/panthor: reject firmware sections with oversized data In panthor_fw_load_section_entry(), the data size to copy is calculated without validating it against the allocated section_size: section->data.size = hdr.data.end - hdr.data.start; If a crafted firmware sets data.size larger than the allocated memory, this could cause a heap buffer overflow in panthor_fw_init_section_mem() memcpy(section->mem->kmap, section->data.buf, section->data.size); Additionally, if the section->data.size exceeds the BO size, could this memset underflow the size calculation, leading to a massive out-of-bounds zeroing of kernel memory? memset(section->mem->kmap + section->data.size, 0, panthor_kernel_bo_size(section->mem) - section->data.size); Reject section entries whose initial data is larger than the section size. Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block") Cc: stable@vger.kernel.org Signed-off-by: Osama Abdelkader Reviewed-by: Steven Price Reviewed-by: Boris Brezillon Link: https://patch.msgid.link/20260716143939.21903-1-osama.abdelkader@gmail.com Signed-off-by: Steven Price --- drivers/gpu/drm/panthor/panthor_fw.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/panthor/panthor_fw.c b/drivers/gpu/drm/panthor/panthor_fw.c index 90f59d782a80..0623d37ac617 100644 --- a/drivers/gpu/drm/panthor/panthor_fw.c +++ b/drivers/gpu/drm/panthor/panthor_fw.c @@ -545,6 +545,7 @@ static int panthor_fw_load_section_entry(struct panthor_device *ptdev, struct panthor_fw_binary_section_entry_hdr hdr; struct panthor_fw_section *section; u32 section_size; + u32 data_size; u32 name_len; int ret; @@ -595,6 +596,13 @@ static int panthor_fw_load_section_entry(struct panthor_device *ptdev, return -EINVAL; } + section_size = hdr.va.end - hdr.va.start; + data_size = hdr.data.end - hdr.data.start; + if (data_size > section_size) { + drm_err(&ptdev->base, "Firmware corrupted, section data exceeds section size\n"); + return -EINVAL; + } + name_len = iter->size - iter->offset; section = drmm_kzalloc(&ptdev->base, sizeof(*section), GFP_KERNEL); @@ -603,7 +611,7 @@ static int panthor_fw_load_section_entry(struct panthor_device *ptdev, list_add_tail(§ion->node, &ptdev->fw->sections); section->flags = hdr.flags; - section->data.size = hdr.data.end - hdr.data.start; + section->data.size = data_size; if (section->data.size > 0) { void *data = drmm_kmalloc(&ptdev->base, section->data.size, GFP_KERNEL); @@ -626,7 +634,6 @@ static int panthor_fw_load_section_entry(struct panthor_device *ptdev, section->name = name; } - section_size = hdr.va.end - hdr.va.start; if (section_size) { u32 cache_mode = hdr.flags & CSF_FW_BINARY_IFACE_ENTRY_CACHE_MODE_MASK; struct panthor_gem_object *bo; -- cgit v1.2.3 From 39490ec6063d9dc3d995b7b48fc5106cd361a547 Mon Sep 17 00:00:00 2001 From: Surendra Singh Chouhan Date: Fri, 24 Jul 2026 18:25:33 +0530 Subject: platform/x86: dell-dw5826e: fix ACPI _DSM function index and bitmask usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PALC_DSM_FN_TRIGGER_PLDR was defined as BIT(1) (value 2). acpi_evaluate_dsm() expects a 0-based function index integer (0, 1, 2, ...), whereas acpi_check_dsm() expects a bitmask of supported function indices (BIT(1), BIT(2), ...). Because PALC_DSM_FN_TRIGGER_PLDR was defined as BIT(1), acpi_evaluate_dsm() was evaluating Function Index 2 instead of Function Index 1, while acpi_check_dsm() was checking for Function Index 1 support. Fix this by setting PALC_DSM_FN_TRIGGER_PLDR to 1 (the function index) and passing BIT(PALC_DSM_FN_TRIGGER_PLDR) to acpi_check_dsm(). Fixes: 1ab843135a77 ("platform/x86: dell-dw5826e: Add reset driver for DW5826e") Signed-off-by: Surendra Singh Chouhan Link: https://patch.msgid.link/20260724125533.74751-1-kr494167@gmail.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/dell/dell-dw5826e-reset.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/dell/dell-dw5826e-reset.c b/drivers/platform/x86/dell/dell-dw5826e-reset.c index 1ca7c3421bb5..64e6e9b1d7a0 100644 --- a/drivers/platform/x86/dell/dell-dw5826e-reset.c +++ b/drivers/platform/x86/dell/dell-dw5826e-reset.c @@ -13,7 +13,7 @@ #include #include -#define PALC_DSM_FN_TRIGGER_PLDR BIT(1) +#define PALC_DSM_FN_TRIGGER_PLDR 1 static guid_t palc_dsm_guid = GUID_INIT(0x5a1a4bba, 0x8006, 0x487e, 0xbe, 0x0a, 0xac, 0xf5, 0xd8, 0xfd, 0xfe, 0x59); @@ -66,7 +66,7 @@ static int palc_probe(struct platform_device *pdev) if (!handle) return -ENODEV; - if (!acpi_check_dsm(handle, &palc_dsm_guid, 1, PALC_DSM_FN_TRIGGER_PLDR)) + if (!acpi_check_dsm(handle, &palc_dsm_guid, 1, BIT(PALC_DSM_FN_TRIGGER_PLDR))) return -ENODEV; return 0; -- cgit v1.2.3 From 9736d2efc99670054359e153a9f312ef4646ec7b Mon Sep 17 00:00:00 2001 From: Wenjia Zhang Date: Fri, 24 Jul 2026 07:37:52 +0200 Subject: MAINTAINERS: Update SHARED MEMORY COMMUNICATIONS (SMC) maintainer entries Due to a change in responsibilities, I can no longer serve as an SMC maintainer and need to be removed from the MAINTAINERS list. To reflect these organizational changes, promote Mahanta Jambigi from reviewer to maintainer. Acked-by: Mahanta Jambigi Signed-off-by: Wenjia Zhang Reviewed-by: Sidraya Jayagond Reviewed-by: Dust Li Link: https://patch.msgid.link/20260724053752.3084-1-wenjia@linux.ibm.com Signed-off-by: Jakub Kicinski --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index b72d2bd07f08..61126d170e4a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -24632,8 +24632,7 @@ SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS M: D. Wythe M: Dust Li M: Sidraya Jayagond -M: Wenjia Zhang -R: Mahanta Jambigi +M: Mahanta Jambigi R: Tony Lu R: Wen Gu L: linux-rdma@vger.kernel.org -- cgit v1.2.3 From 072cd1f21819dedd2252e704d255de3b0cfc61a7 Mon Sep 17 00:00:00 2001 From: "Xiang Mei (Microsoft)" Date: Wed, 22 Jul 2026 00:29:50 +0000 Subject: nexthop: take nh->lock for f6i_list walks in replace check and notify fib6_check_nh_list() and __nexthop_replace_notify() walk nh->f6i_list during an RTNL-serialized nexthop replace without holding nh->lock. IPv6 RTM_NEWROUTE/RTM_DELROUTE run without RTNL and mutate that list under nh->lock (fib6_add_rt2node_nh(), fib6_purge_rt()), so both walks race a concurrent route delete that unlinks and frees a fib6_info: BUG: KASAN: slab-use-after-free in rt6_fill_node.isra.0 (net/ipv6/route.c:5799) Read of size 4 at addr ffff888014607e64 by task exploit/143 rt6_fill_node.isra.0 (net/ipv6/route.c:5799) fib6_rt_update (net/ipv6/route.c:6412) __nexthop_replace_notify (net/ipv4/nexthop.c:2542) rtm_new_nexthop (net/ipv4/nexthop.c:2554) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) BUG: KASAN: slab-use-after-free in fib6_check_nh_list (net/ipv4/nexthop.c:1605) Read of size 8 at addr ffff888014a7d068 by task exploit/142 fib6_check_nh_list (net/ipv4/nexthop.c:1605) rtm_new_nexthop (net/ipv4/nexthop.c:2575) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) Both walks only read the entries and take no tb6_lock, so protect them with nh->lock; fib6_rt_update() uses gfp_any(), which returns GFP_ATOMIC under the lock. Fixes: 081efd18326e ("ipv6: Protect nh->f6i_list with spinlock and flag.") Reported-by: AutonomousCodeSecurity@microsoft.com Signed-off-by: Xiang Mei (Microsoft) Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260722002951.2614721-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski --- net/ipv4/nexthop.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c index 44fe75004cac..eb5c76ac807b 100644 --- a/net/ipv4/nexthop.c +++ b/net/ipv4/nexthop.c @@ -1597,14 +1597,21 @@ static int fib6_check_nh_list(struct nexthop *old, struct nexthop *new, struct netlink_ext_ack *extack) { struct fib6_info *f6i; + int err = 0; if (list_empty(&old->f6i_list)) return 0; + spin_lock_bh(&old->lock); list_for_each_entry(f6i, &old->f6i_list, nh_list) { - if (check_src_addr(&f6i->fib6_src.addr, extack) < 0) - return -EINVAL; + err = check_src_addr(&f6i->fib6_src.addr, extack); + if (err) + break; } + spin_unlock_bh(&old->lock); + + if (err) + return err; return fib6_check_nexthop(new, NULL, extack); } @@ -2538,8 +2545,10 @@ static void __nexthop_replace_notify(struct net *net, struct nexthop *nh, fi->nh_updated = false; } + spin_lock_bh(&nh->lock); list_for_each_entry(f6i, &nh->f6i_list, nh_list) fib6_rt_update(net, f6i, info); + spin_unlock_bh(&nh->lock); } /* send RTM_NEWROUTE with REPLACE flag set for all FIB entries -- cgit v1.2.3 From 4787a6d2629b4e8c0b6bacab1f75c1660eca44d9 Mon Sep 17 00:00:00 2001 From: "Xiang Mei (Microsoft)" Date: Wed, 22 Jul 2026 00:29:51 +0000 Subject: nexthop: avoid unlocked f6i_list walk in nh_rt_cache_flush nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop replace without holding nh->lock, racing the unlocked IPv6 route add/delete that mutate the list under nh->lock and free fib6_info entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()): BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243) Read of size 8 at addr ffff888012953e18 by task exploit/146 nh_rt_cache_flush (net/ipv4/nexthop.c:2243) replace_nexthop (net/ipv4/nexthop.c:2610) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) Unlike the other f6i_list walks, this one bumps each route's sernum via fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock around it would invert the established tb6_lock -> nh->lock order and deadlock. As the only purpose is to invalidate cached dsts, bump the IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead, mirroring the rt_cache_flush() already done for IPv4 just above. Fixes: 081efd18326e ("ipv6: Protect nh->f6i_list with spinlock and flag.") Reported-by: AutonomousCodeSecurity@microsoft.com Signed-off-by: Xiang Mei (Microsoft) Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260722002951.2614721-2-xmei5@asu.edu Signed-off-by: Jakub Kicinski --- net/ipv4/nexthop.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c index eb5c76ac807b..0f1e21a5c812 100644 --- a/net/ipv4/nexthop.c +++ b/net/ipv4/nexthop.c @@ -2240,18 +2240,18 @@ static void remove_one_nexthop(struct net *net, struct nexthop *nh, static void nh_rt_cache_flush(struct net *net, struct nexthop *nh, struct nexthop *replaced_nh) { - struct fib6_info *f6i; struct nh_group *nhg; + bool have_f6i; int i; if (!list_empty(&nh->fi_list)) rt_cache_flush(net); - list_for_each_entry(f6i, &nh->f6i_list, nh_list) { - spin_lock_bh(&f6i->fib6_table->tb6_lock); - fib6_update_sernum_upto_root(net, f6i); - spin_unlock_bh(&f6i->fib6_table->tb6_lock); - } + spin_lock_bh(&nh->lock); + have_f6i = !list_empty(&nh->f6i_list); + spin_unlock_bh(&nh->lock); + if (have_f6i) + rt_genid_bump_ipv6(net); /* if an IPv6 group was replaced, we have to release all old * dsts to make sure all refcounts are released -- cgit v1.2.3 From f0d9c3ffc2b5fc2ffacb56b3036155ce7a940a12 Mon Sep 17 00:00:00 2001 From: John Ericson Date: Sat, 18 Jul 2026 14:29:01 -0400 Subject: af_unix: fix listen() succeeding on sockets in the wrong state Commit fd0a109a0f6b ("net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid") inserted a prepare_peercred() call between err = -EINVAL and the socket-state check in unix_listen(). Since prepare_peercred() leaves err at 0 on success, listen() on an AF_UNIX socket that is not in TCP_CLOSE or TCP_LISTEN state (e.g. one that is already connected) now silently returns success without doing anything, instead of failing with EINVAL as it did before. Fixes: fd0a109a0f6b ("net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid") Signed-off-by: John Ericson Link: https://patch.msgid.link/20260718182903.2295560-1-John.Ericson@Obsidian.Systems Signed-off-by: Jakub Kicinski --- net/unix/af_unix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index f7a9d55eee8a..10ed9421e43a 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -823,6 +823,7 @@ static int unix_listen(struct socket *sock, int backlog) if (err) goto out; unix_state_lock(sk); + err = -EINVAL; if (sk->sk_state != TCP_CLOSE && sk->sk_state != TCP_LISTEN) goto out_unlock; if (backlog > sk->sk_max_ack_backlog) -- cgit v1.2.3 From 7f57c650d08b8793bb551bdb33ad876535ef9fe8 Mon Sep 17 00:00:00 2001 From: John Ericson Date: Sat, 18 Jul 2026 14:29:02 -0400 Subject: selftests/net/af_unix: test listen() rejects wrong socket states Add a regression test for the unix_listen() state check. The key case is listen() on a bound socket that has already been connected: it is no longer in TCP_CLOSE or TCP_LISTEN, so it must fail with EINVAL. A prepare_peercred() call slipped in ahead of that check once left err at 0 and made listen() silently succeed there instead; this guards against a repeat. The neighbouring outcomes are covered too so they cannot regress the same way: a bound socket in TCP_CLOSE listens fine, calling listen() again on a socket already in TCP_LISTEN is allowed, and an unbound socket fails with EINVAL. Each case runs for both listenable socket types (SOCK_STREAM and SOCK_SEQPACKET) and both pathname and abstract addresses. Fixes: fd0a109a0f6b ("net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid") Signed-off-by: John Ericson Link: https://patch.msgid.link/20260718182903.2295560-2-John.Ericson@Obsidian.Systems Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/af_unix/.gitignore | 1 + tools/testing/selftests/net/af_unix/Makefile | 1 + tools/testing/selftests/net/af_unix/unix_listen.c | 187 ++++++++++++++++++++++ 3 files changed, 189 insertions(+) create mode 100644 tools/testing/selftests/net/af_unix/unix_listen.c diff --git a/tools/testing/selftests/net/af_unix/.gitignore b/tools/testing/selftests/net/af_unix/.gitignore index 240b26740c9e..973176644103 100644 --- a/tools/testing/selftests/net/af_unix/.gitignore +++ b/tools/testing/selftests/net/af_unix/.gitignore @@ -6,3 +6,4 @@ scm_rights so_peek_off unix_connect unix_connreset +unix_listen diff --git a/tools/testing/selftests/net/af_unix/Makefile b/tools/testing/selftests/net/af_unix/Makefile index 4c0375e28bbe..57d159803a3a 100644 --- a/tools/testing/selftests/net/af_unix/Makefile +++ b/tools/testing/selftests/net/af_unix/Makefile @@ -14,6 +14,7 @@ TEST_GEN_PROGS := \ so_peek_off \ unix_connect \ unix_connreset \ + unix_listen \ # end of TEST_GEN_PROGS include ../../lib.mk diff --git a/tools/testing/selftests/net/af_unix/unix_listen.c b/tools/testing/selftests/net/af_unix/unix_listen.c new file mode 100644 index 000000000000..416fa3e5bfe9 --- /dev/null +++ b/tools/testing/selftests/net/af_unix/unix_listen.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Tests for the state checks in AF_UNIX listen(). + * + * The central case is a regression test: listen() on a bound socket that + * is already connected (i.e. not in TCP_CLOSE or TCP_LISTEN state) must + * fail with EINVAL. A prior change accidentally let it return success + * without doing anything, because a helper called in between reset the + * error code to 0. The neighbouring checks (unbound, already listening) + * are tested too so they cannot silently regress the same way. + * + * Every case runs for both listenable socket types (SOCK_STREAM and + * SOCK_SEQPACKET) and both pathname and abstract addresses. + */ +#define _GNU_SOURCE + +#include +#include +#include +#include +#include + +#include +#include + +#include "kselftest_harness.h" + +#define SK_NAME "unix_listen_sk" +#define SRV_NAME "unix_listen_srv" + +FIXTURE(unix_listen) +{ + int sk; /* socket under test */ + int server; /* a listening peer, when a test needs one */ + struct sockaddr_un addr, srv_addr; + socklen_t addrlen, srv_addrlen; +}; + +FIXTURE_VARIANT(unix_listen) +{ + int type; + int abstract; +}; + +FIXTURE_VARIANT_ADD(unix_listen, stream_pathname) +{ + .type = SOCK_STREAM, + .abstract = 0, +}; + +FIXTURE_VARIANT_ADD(unix_listen, stream_abstract) +{ + .type = SOCK_STREAM, + .abstract = 1, +}; + +FIXTURE_VARIANT_ADD(unix_listen, seqpacket_pathname) +{ + .type = SOCK_SEQPACKET, + .abstract = 0, +}; + +FIXTURE_VARIANT_ADD(unix_listen, seqpacket_abstract) +{ + .type = SOCK_SEQPACKET, + .abstract = 1, +}; + +/* Fill @addr with a pathname or abstract address named @name. */ +static socklen_t unix_set_addr(struct sockaddr_un *addr, const char *name, + int abstract) +{ + size_t len = strlen(name); + + memset(addr, 0, sizeof(*addr)); + addr->sun_family = AF_UNIX; + /* An abstract address leads with a NUL and has no filesystem entry. */ + memcpy(addr->sun_path + (abstract ? 1 : 0), name, len); + + return offsetof(struct sockaddr_un, sun_path) + len + 1; +} + +FIXTURE_SETUP(unix_listen) +{ + self->sk = -1; + self->server = -1; + self->addrlen = unix_set_addr(&self->addr, SK_NAME, variant->abstract); + self->srv_addrlen = unix_set_addr(&self->srv_addr, SRV_NAME, + variant->abstract); +} + +FIXTURE_TEARDOWN(unix_listen) +{ + if (self->sk >= 0) + close(self->sk); + if (self->server >= 0) + close(self->server); + + /* Pathname sockets leave a filesystem entry behind; abstract ones do not. */ + if (!variant->abstract) { + remove(SK_NAME); + remove(SRV_NAME); + } +} + +/* A bound socket in TCP_CLOSE is the normal, allowed case. */ +TEST_F(unix_listen, bound_is_ok) +{ + int err; + + self->sk = socket(AF_UNIX, variant->type, 0); + ASSERT_LE(0, self->sk); + + err = bind(self->sk, (struct sockaddr *)&self->addr, self->addrlen); + ASSERT_EQ(0, err); + + err = listen(self->sk, 8); + EXPECT_EQ(0, err); +} + +/* Listening again on an already-listening socket (TCP_LISTEN) is allowed. */ +TEST_F(unix_listen, relisten_is_ok) +{ + int err; + + self->sk = socket(AF_UNIX, variant->type, 0); + ASSERT_LE(0, self->sk); + + err = bind(self->sk, (struct sockaddr *)&self->addr, self->addrlen); + ASSERT_EQ(0, err); + + err = listen(self->sk, 8); + ASSERT_EQ(0, err); + + err = listen(self->sk, 16); + EXPECT_EQ(0, err); +} + +/* listen() on an unbound socket fails: there is nothing to listen on. */ +TEST_F(unix_listen, unbound_is_einval) +{ + int err; + + self->sk = socket(AF_UNIX, variant->type, 0); + ASSERT_LE(0, self->sk); + + err = listen(self->sk, 8); + EXPECT_EQ(-1, err); + EXPECT_EQ(EINVAL, errno); +} + +/* + * The regression: a bound socket that has already been connected is not in + * TCP_CLOSE or TCP_LISTEN, so listen() must reject it with EINVAL rather + * than quietly succeeding. + */ +TEST_F(unix_listen, connected_is_einval) +{ + int err; + + self->server = socket(AF_UNIX, variant->type, 0); + ASSERT_LE(0, self->server); + + err = bind(self->server, (struct sockaddr *)&self->srv_addr, + self->srv_addrlen); + ASSERT_EQ(0, err); + + err = listen(self->server, 8); + ASSERT_EQ(0, err); + + self->sk = socket(AF_UNIX, variant->type, 0); + ASSERT_LE(0, self->sk); + + /* Bind first so the unbound check does not mask the state check. */ + err = bind(self->sk, (struct sockaddr *)&self->addr, self->addrlen); + ASSERT_EQ(0, err); + + err = connect(self->sk, (struct sockaddr *)&self->srv_addr, + self->srv_addrlen); + ASSERT_EQ(0, err); + + err = listen(self->sk, 8); + EXPECT_EQ(-1, err); + EXPECT_EQ(EINVAL, errno); +} + +TEST_HARNESS_MAIN -- cgit v1.2.3 From a3c8382ebce4780c6b3ace2c09bc342313ac0186 Mon Sep 17 00:00:00 2001 From: Jason Xing Date: Sun, 19 Jul 2026 15:56:04 +0200 Subject: xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx This patch is inspired by the check[1] from sashiko. It says when overflow happens, the address of cq to be published is invalid. Actually the severer thing is the whole process of publishing the address of cq in this particular case is not right: it should truely publish the address and advance the cached_prod in cq as long as it reads descriptors from txq. The following is the full analysis. xsk_drop_skb() is called in three places, which all discard a partially built multi-buffer skb: 1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS 2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in the TX ring prevents the partial packet from completing 3) xsk_release(): socket close while xs->skb holds an incomplete packet In all three cases, the TX descriptors for the already-processed frags have been consumed from the TX ring (xskq_cons_release), and CQ slots have been reserved. However, xsk_drop_skb() calls xsk_consume_skb() which cancels the CQ reservations via xsk_cq_cancel_locked(). Since the buffer addresses never appear in the completion queue, userspace permanently loses track of these buffers. Fix this by letting consume_skb() trigger the existing xsk_destruct_skb destructor, which already submits buffer addresses to the CQ via xsk_cq_submit_addr_locked(). Note that cancelling the descriptors back to the TX ring (via xskq_cons_cancel_n) is not a appropriate option because an oversized packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely, which is an obviously deadlock bug in the TX path. Also move the desc->addr assignment in xsk_build_skb() above the overflow check so that the current descriptor's address is recorded before a potential -EOVERFLOW jump to free_err, consistent with the zerocopy path in xsk_build_skb_zerocopy(). [1]: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/ Fixes: cf24f5a5feea ("xsk: add support for AF_XDP multi-buffer on Tx path") Acked-by: Maciej Fijalkowski Signed-off-by: Jason Xing Acked-by: Stanislav Fomichev Link: https://patch.msgid.link/20260719135609.147823-2-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski --- net/xdp/xsk.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index b970f30ea9b9..a7a83dc4546a 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -794,8 +794,11 @@ static void xsk_consume_skb(struct sk_buff *skb) static void xsk_drop_skb(struct sk_buff *skb) { - xdp_sk(skb->sk)->tx->invalid_descs += xsk_get_num_desc(skb); - xsk_consume_skb(skb); + struct xdp_sock *xs = xdp_sk(skb->sk); + + xs->tx->invalid_descs += xsk_get_num_desc(skb); + consume_skb(skb); + xs->skb = NULL; } static int xsk_skb_metadata(struct sk_buff *skb, void *buffer, @@ -877,7 +880,7 @@ static struct sk_buff *xsk_build_skb_zerocopy(struct xdp_sock *xs, return ERR_PTR(-ENOMEM); /* in case of -EOVERFLOW that could happen below, - * xsk_consume_skb() will release this node as whole skb + * xsk_drop_skb() will release this node as whole skb * would be dropped, which implies freeing all list elements */ xsk_addr->addrs[xsk_addr->num_descs] = desc->addr; @@ -969,6 +972,8 @@ static struct sk_buff *xsk_build_skb(struct xdp_sock *xs, goto free_err; } + xsk_addr->addrs[xsk_addr->num_descs] = desc->addr; + if (unlikely(nr_frags == (MAX_SKB_FRAGS - 1) && xp_mb_desc(desc))) { err = -EOVERFLOW; goto free_err; @@ -986,8 +991,6 @@ static struct sk_buff *xsk_build_skb(struct xdp_sock *xs, skb_add_rx_frag(skb, nr_frags, page, 0, len, PAGE_SIZE); refcount_add(PAGE_SIZE, &xs->sk.sk_wmem_alloc); - - xsk_addr->addrs[xsk_addr->num_descs] = desc->addr; } } -- cgit v1.2.3 From bd44a6dcd4248883de90f5dad53ae80066e27096 Mon Sep 17 00:00:00 2001 From: Jason Xing Date: Sun, 19 Jul 2026 15:56:05 +0200 Subject: xsk: drain continuation descs after overflow in xsk_build_skb() Fix generic xmit path multi-buffer logic when packets are either too big (count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is included in fragmented packet. Introduce xdp_sock::drain_cont and act upon this flag - when it is set, keep on consuming descriptors from AF_XDP Tx ring and put them directly onto Cq. Previously these descriptors were silently lost and could never be reached again. Fixes: cf24f5a5feea ("xsk: add support for AF_XDP multi-buffer on Tx path") Closes: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/ Reviewed-by: Jason Xing Co-developed-by: Maciej Fijalkowski # wrapped cq addr submission onto routine Signed-off-by: Maciej Fijalkowski Signed-off-by: Jason Xing Acked-by: Stanislav Fomichev Link: https://patch.msgid.link/20260719135609.147823-3-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski --- include/net/xdp_sock.h | 1 + net/xdp/xsk.c | 45 ++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 43 insertions(+), 3 deletions(-) diff --git a/include/net/xdp_sock.h b/include/net/xdp_sock.h index ebac60a3d8a1..8b51876efbed 100644 --- a/include/net/xdp_sock.h +++ b/include/net/xdp_sock.h @@ -80,6 +80,7 @@ struct xdp_sock { * call of __xsk_generic_xmit(). */ struct sk_buff *skb; + bool drain_cont; struct list_head map_list; /* Protects map_list */ diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index a7a83dc4546a..12a845d012f6 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -737,6 +737,19 @@ static void xsk_cq_submit_addr_locked(struct xsk_buff_pool *pool, spin_unlock_irqrestore(&pool->cq_prod_lock, flags); } +static void xsk_cq_submit_addr_single_locked(struct xsk_buff_pool *pool, + struct xdp_desc *desc) +{ + unsigned long flags; + u32 idx; + + spin_lock_irqsave(&pool->cq_prod_lock, flags); + idx = xskq_get_prod(pool->cq); + xskq_prod_write_addr(pool->cq, idx, desc->addr); + xskq_prod_submit_n(pool->cq, 1); + spin_unlock_irqrestore(&pool->cq_prod_lock, flags); +} + static void xsk_cq_cancel_locked(struct xsk_buff_pool *pool, u32 n) { spin_lock(&pool->cq->cq_cached_prod_lock); @@ -1028,13 +1041,14 @@ free_err: static int __xsk_generic_xmit(struct sock *sk) { struct xdp_sock *xs = xdp_sk(sk); - bool sent_frame = false; struct xdp_desc desc; struct sk_buff *skb; + u32 cached_cons; u32 max_batch; int err = 0; mutex_lock(&xs->mutex); + cached_cons = xs->tx->cached_cons; /* Since we dropped the RCU read lock, the socket state might have changed. */ if (unlikely(!xsk_is_bound(xs))) { @@ -1063,11 +1077,21 @@ static int __xsk_generic_xmit(struct sock *sk) goto out; } + if (unlikely(xs->drain_cont)) { + xsk_cq_submit_addr_single_locked(xs->pool, &desc); + xs->tx->invalid_descs++; + xskq_cons_release(xs->tx); + xs->drain_cont = xp_mb_desc(&desc); + continue; + } + skb = xsk_build_skb(xs, &desc); if (IS_ERR(skb)) { err = PTR_ERR(skb); if (err != -EOVERFLOW) goto out; + if (xp_mb_desc(&desc)) + xs->drain_cont = true; err = 0; continue; } @@ -1096,18 +1120,33 @@ static int __xsk_generic_xmit(struct sock *sk) goto out; } - sent_frame = true; xs->skb = NULL; } if (xskq_has_descs(xs->tx)) { + bool drain = xs->skb || xs->drain_cont || xp_mb_desc(&desc); + + err = xsk_cq_reserve_locked(xs->pool); + if (err) { + xs->tx->invalid_descs--; + if (xs->skb) + xsk_drop_skb(xs->skb); + xs->drain_cont = drain; + err = -EAGAIN; + goto out; + } + if (xs->skb) xsk_drop_skb(xs->skb); + + xsk_cq_submit_addr_single_locked(xs->pool, &desc); + xskq_cons_release(xs->tx); + xs->drain_cont = xp_mb_desc(&desc); } out: - if (sent_frame) + if (xs->tx->cached_cons != cached_cons) __xsk_tx_release(xs); mutex_unlock(&xs->mutex); -- cgit v1.2.3 From 08c9a8e794b4694c100dafcb80e069e29ad81b64 Mon Sep 17 00:00:00 2001 From: Maciej Fijalkowski Date: Sun, 19 Jul 2026 15:56:06 +0200 Subject: xsk: provide sufficient space in pool->tx_descs The temporary Tx descriptor array in an XSK buffer pool is currently sized from the Tx ring of the socket that creates the pool. This is insufficient for shared-UMEM Tx. A later socket may have a larger Tx ring and submit a valid multi-buffer packet containing more descriptors than the first socket's ring, while still remaining within the device's xdp_zc_max_segs limit. A packet-framed batch parser bounded by the temporary array cannot reach the end-of-packet descriptor in that case. It leaves the packet on the Tx ring and encounters the same packet on every subsequent attempt, stalling Tx processing for that socket. Size the temporary descriptor array to the larger of the first Tx ring and the device's xdp_zc_max_segs capability. This keeps the array large enough to inspect one maximum-sized valid packet. Larger shared Tx rings do not require further resizing, as they can be processed over multiple batches. Following commit will actually address the data path side. Fixes: d5581966040f ("xsk: support ZC Tx multi-buffer in batch API") Reviewed-by: Jason Xing Signed-off-by: Maciej Fijalkowski Acked-by: Stanislav Fomichev Link: https://patch.msgid.link/20260719135609.147823-4-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski --- include/net/xsk_buff_pool.h | 6 ++++-- net/xdp/xsk.c | 10 +++++++--- net/xdp/xsk_buff_pool.c | 12 ++++++++---- 3 files changed, 19 insertions(+), 9 deletions(-) diff --git a/include/net/xsk_buff_pool.h b/include/net/xsk_buff_pool.h index ccb3b350001f..f5e737a83055 100644 --- a/include/net/xsk_buff_pool.h +++ b/include/net/xsk_buff_pool.h @@ -102,12 +102,14 @@ struct xsk_buff_pool { /* AF_XDP core. */ struct xsk_buff_pool *xp_create_and_assign_umem(struct xdp_sock *xs, - struct xdp_umem *umem); + struct xdp_umem *umem, + u32 max_segs); int xp_assign_dev(struct xsk_buff_pool *pool, struct net_device *dev, u16 queue_id, u16 flags); int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_sock *umem_xs, struct net_device *dev, u16 queue_id); -int xp_alloc_tx_descs(struct xsk_buff_pool *pool, struct xdp_sock *xs); +int xp_alloc_tx_descs(struct xsk_buff_pool *pool, struct xdp_sock *xs, + u32 max_segs); void xp_destroy(struct xsk_buff_pool *pool); void xp_get_pool(struct xsk_buff_pool *pool); bool xp_put_pool(struct xsk_buff_pool *pool); diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 12a845d012f6..091792d1d82d 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -1525,7 +1525,8 @@ static int xsk_bind(struct socket *sock, struct sockaddr_unsized *addr, int addr * and/or device. */ xs->pool = xp_create_and_assign_umem(xs, - umem_xs->umem); + umem_xs->umem, + dev->xdp_zc_max_segs); if (!xs->pool) { err = -ENOMEM; sockfd_put(sock); @@ -1557,7 +1558,8 @@ static int xsk_bind(struct socket *sock, struct sockaddr_unsized *addr, int addr * utilizes */ if (xs->tx && !xs->pool->tx_descs) { - err = xp_alloc_tx_descs(xs->pool, xs); + err = xp_alloc_tx_descs(xs->pool, xs, + dev->xdp_zc_max_segs); if (err) { xp_put_pool(xs->pool); xs->pool = NULL; @@ -1575,7 +1577,9 @@ static int xsk_bind(struct socket *sock, struct sockaddr_unsized *addr, int addr goto out_unlock; } else { /* This xsk has its own umem. */ - xs->pool = xp_create_and_assign_umem(xs, xs->umem); + xs->pool = xp_create_and_assign_umem(xs, xs->umem, + dev->xdp_zc_max_segs); + if (!xs->pool) { err = -ENOMEM; goto out_unlock; diff --git a/net/xdp/xsk_buff_pool.c b/net/xdp/xsk_buff_pool.c index 1f28a9641571..12c9fb29af05 100644 --- a/net/xdp/xsk_buff_pool.c +++ b/net/xdp/xsk_buff_pool.c @@ -42,9 +42,12 @@ void xp_destroy(struct xsk_buff_pool *pool) kvfree(pool); } -int xp_alloc_tx_descs(struct xsk_buff_pool *pool, struct xdp_sock *xs) +int xp_alloc_tx_descs(struct xsk_buff_pool *pool, struct xdp_sock *xs, + u32 max_segs) { - pool->tx_descs = kvzalloc_objs(*pool->tx_descs, xs->tx->nentries); + u32 nentries = max(xs->tx->nentries, max_segs); + + pool->tx_descs = kvzalloc_objs(*pool->tx_descs, nentries); if (!pool->tx_descs) return -ENOMEM; @@ -52,7 +55,8 @@ int xp_alloc_tx_descs(struct xsk_buff_pool *pool, struct xdp_sock *xs) } struct xsk_buff_pool *xp_create_and_assign_umem(struct xdp_sock *xs, - struct xdp_umem *umem) + struct xdp_umem *umem, + u32 max_segs) { bool unaligned = umem->flags & XDP_UMEM_UNALIGNED_CHUNK_FLAG; struct xsk_buff_pool *pool; @@ -69,7 +73,7 @@ struct xsk_buff_pool *xp_create_and_assign_umem(struct xdp_sock *xs, goto out; if (xs->tx) - if (xp_alloc_tx_descs(pool, xs)) + if (xp_alloc_tx_descs(pool, xs, max_segs)) goto out; pool->chunk_mask = ~((u64)umem->chunk_size - 1); -- cgit v1.2.3 From 72f2b4516faf55d4dfac2414649d3cffa5fd2c5e Mon Sep 17 00:00:00 2001 From: Maciej Fijalkowski Date: Sun, 19 Jul 2026 15:56:07 +0200 Subject: xsk: reclaim invalid Tx descriptors in ZC batch path The zero-copy Tx batch parser stops when it encounters an invalid descriptor. If this happens after one or more continuation descriptors, the Tx consumer can be advanced past fragments that are neither submitted to the driver nor returned to userspace through the completion ring. A similar problem occurs when a packet exceeds xdp_zc_max_segs. The descriptors consumed up to the limit are released without completion, and the remaining continuation descriptors can subsequently be interpreted as the beginning of another packet. Parse Tx batches in packet units and distinguish descriptors belonging to complete valid packets from descriptors consumed while draining an invalid or oversized packet. Return the former to the driver and append the latter to the CQ address area so userspace can reclaim their UMEM frames. Treat a standalone invalid descriptor as a one-descriptor reclaim-only packet. Advancing the Tx-ring consumer releases the ring slot, but does not by itself return ownership of the referenced UMEM frame to userspace. Once draining starts, continue until the packet's end-of-packet descriptor is consumed. Preserve the drain state on the socket when EOP has not yet been supplied, so draining can continue during a later call. Leave incomplete but otherwise valid packets on the Tx ring. Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing. Walk their Tx sockets one packet at a time, preserving the existing per-socket fairness scheme, instead of using the legacy one-descriptor fallback. Keep that fallback for shared pools that do not use multi-buffer Tx. Since the drain state is maintained per socket and both the singular and shared paths can resume an interrupted drain, changing the socket list from singular to shared requires no special bind-time transition. CQ entries are positional, and drivers may complete only part of the Tx work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only entries cannot be published immediately when earlier driver-visible descriptors are still outstanding. Track the number of driver-visible CQ entries preceding the reclaim entries. Let xsk_tx_completed() publish partial hardware Tx completions, and publish the reclaim entries only after every earlier Tx descriptor has completed. Complete a reclaim-only batch immediately when there is no driver-visible work in front of it, and prevent another Tx batch from being appended while reclaim entries remain pending. Also cap batch processing by the size of the pool's temporary descriptor array, as Tx rings belonging to sockets sharing a UMEM may have different sizes. This ensures that every invalid Tx descriptor consumed by the ZC batch path is either submitted to the driver as part of a valid packet or returned to userspace without violating CQ completion ordering. Reviewed-by: Jason Xing Signed-off-by: Maciej Fijalkowski Acked-by: Stanislav Fomichev Fixes: cf24f5a5feea ("xsk: add support for AF_XDP multi-buffer on Tx path") Link: https://patch.msgid.link/20260719135609.147823-5-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski --- Documentation/networking/af_xdp.rst | 54 ++++++----- include/net/xsk_buff_pool.h | 3 + net/xdp/xsk.c | 187 ++++++++++++++++++++++++++++++++---- net/xdp/xsk_buff_pool.c | 1 + net/xdp/xsk_queue.h | 65 +++++++++---- 5 files changed, 248 insertions(+), 62 deletions(-) diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst index 50d92084a49c..cc3f0d16b28f 100644 --- a/Documentation/networking/af_xdp.rst +++ b/Documentation/networking/af_xdp.rst @@ -43,12 +43,13 @@ UMEM also has two rings: the FILL ring and the COMPLETION ring. The FILL ring is used by the application to send down addr for the kernel to fill in with RX packet data. References to these frames will then appear in the RX ring once each packet has been received. The -COMPLETION ring, on the other hand, contains frame addr that the -kernel has transmitted completely and can now be used again by user -space, for either TX or RX. Thus, the frame addrs appearing in the -COMPLETION ring are addrs that were previously transmitted using the -TX ring. In summary, the RX and FILL rings are used for the RX path -and the TX and COMPLETION rings are used for the TX path. +COMPLETION ring, on the other hand, contains frame addresses from Tx +descriptors that the kernel has finished processing and that can now be +used again by user space, for either Tx or Rx. This includes frames whose +transmission has completed as well as frames referenced by invalid Tx +descriptors rejected by the kernel. A completion therefore returns +ownership of a frame to user space, but does not by itself guarantee that +the packet was successfully transmitted. The socket is then finally bound with a bind() call to a device and a specific queue id on that device, and it is not until bind is @@ -169,14 +170,15 @@ chunks mode, then the incoming addr will be left untouched. UMEM Completion Ring ~~~~~~~~~~~~~~~~~~~~ -The COMPLETION Ring is used transfer ownership of UMEM frames from +The COMPLETION Ring is used to transfer ownership of UMEM frames from kernel-space to user-space. Just like the FILL ring, UMEM indices are -used. - -Frames passed from the kernel to user-space are frames that has been -sent (TX ring) and can be used by user-space again. - -The user application consumes UMEM addrs from this ring. +used. Frames passed from the kernel to user-space are frames referenced +by Tx descriptors that the kernel has finished processing and can be +used by user-space again. This includes both frames whose transmission +has completed and frames referenced by invalid Tx descriptors that were +rejected and reclaimed by the kernel. A completion entry does not +guarantee successful packet transmission. The user application consumes +UMEM addrs from this ring. RX Ring @@ -504,21 +506,25 @@ will be treated as an invalid descriptor. These are the semantics for producing packets onto AF_XDP Tx ring consisting of multiple frames: -* When an invalid descriptor is found, all the other - descriptors/frames of this packet are marked as invalid and not - completed. The next descriptor is treated as the start of a new - packet, even if this was not the intent (because we cannot guess - the intent). As before, if your program is producing invalid - descriptors you have a bug that must be fixed. +* When an invalid descriptor is found, the complete packet is treated as + invalid. The kernel consumes descriptors through the descriptor marking + the end of the packet and returns all their frame addresses through the + COMPLETION ring. A standalone invalid descriptor is treated as a + one-descriptor invalid packet. The descriptor following the end of the + invalid packet is treated as the start of a new packet. As before, if + your program is producing invalid descriptors you have a bug that must + be fixed. Rejected descriptors are reported in the ``tx_invalid_descs`` + statistic. * Zero length descriptors are treated as invalid descriptors. * For copy mode, the maximum supported number of frames in a packet is - equal to CONFIG_MAX_SKB_FRAGS + 1. If it is exceeded, all - descriptors accumulated so far are dropped and treated as - invalid. To produce an application that will work on any system - regardless of this config setting, limit the number of frags to 18, - as the minimum value of the config is 17. + equal to CONFIG_MAX_SKB_FRAGS + 1. If it is exceeded, all descriptors + through the end of the oversized packet are consumed, treated as invalid, + and their frame addresses are returned through the COMPLETION ring. To + produce an application that will work on any system regardless of this + config setting, limit the number of frags to 18, as the minimum value of + the config is 17. * For zero-copy mode, the limit is up to what the NIC HW supports. Usually at least five on the NICs we have checked. We diff --git a/include/net/xsk_buff_pool.h b/include/net/xsk_buff_pool.h index f5e737a83055..2bb1d122b1bc 100644 --- a/include/net/xsk_buff_pool.h +++ b/include/net/xsk_buff_pool.h @@ -78,6 +78,9 @@ struct xsk_buff_pool { u32 chunk_size; u32 chunk_shift; u32 frame_len; + u32 tx_descs_nentries; + u32 reclaim_descs; + u32 tx_zc_pending_descs; u32 xdp_zc_max_segs; u8 tx_metadata_len; /* inherited from umem */ u8 cached_need_wakeup; diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 091792d1d82d..f906d51b6699 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -499,6 +499,23 @@ void __xsk_map_flush(struct list_head *flush_list) void xsk_tx_completed(struct xsk_buff_pool *pool, u32 nb_entries) { + u32 reclaim_descs = READ_ONCE(pool->reclaim_descs); + + if (unlikely(reclaim_descs)) { + u32 pending_descs = READ_ONCE(pool->tx_zc_pending_descs); + + if (nb_entries < pending_descs) { + WRITE_ONCE(pool->tx_zc_pending_descs, + pending_descs - nb_entries); + xskq_prod_submit_n(pool->cq, nb_entries); + return; + } + + WRITE_ONCE(pool->tx_zc_pending_descs, 0); + nb_entries += reclaim_descs; + WRITE_ONCE(pool->reclaim_descs, 0); + } + xskq_prod_submit_n(pool->cq, nb_entries); } EXPORT_SYMBOL(xsk_tx_completed); @@ -574,24 +591,157 @@ static u32 xsk_tx_peek_release_fallback(struct xsk_buff_pool *pool, u32 max_entr return nb_pkts; } +static void xsk_tx_commit_batch(struct xsk_buff_pool *pool, + struct xsk_tx_batch *batch) +{ + u32 nb_descs = xsk_tx_batch_cq_descs(batch); + u32 cq_cached_prod; + + if (!nb_descs) + return; + + cq_cached_prod = pool->cq->cached_prod; + xskq_prod_write_addr_batch(pool->cq, pool->tx_descs, nb_descs); + + if (unlikely(batch->reclaim_descs)) { + u32 cq_pending_descs; + + /* CQ is positional. Descriptors already written but not + * submitted must complete before any reclaim-only descriptors + * appended below. + */ + cq_pending_descs = cq_cached_prod - xskq_get_prod(pool->cq); + + WRITE_ONCE(pool->tx_zc_pending_descs, + batch->tx_descs + cq_pending_descs); + WRITE_ONCE(pool->reclaim_descs, batch->reclaim_descs); + if (unlikely(!pool->tx_zc_pending_descs)) + xsk_tx_completed(pool, 0); + } +} + +static struct xsk_tx_batch +__xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, struct xdp_sock *xs, + struct xdp_desc *descs, u32 max_descs) +{ + struct xsk_tx_batch batch = {}; + u32 entries; + + entries = xskq_cons_nb_entries(xs->tx, max_descs); + if (!entries) + return batch; + + batch = xskq_cons_read_desc_batch(xs, pool, descs, max_descs); + if (!xsk_tx_batch_cq_descs(&batch)) { + xs->tx->queue_empty_descs++; + } else { + __xskq_cons_release(xs->tx); + xs->sk.sk_write_space(&xs->sk); + } + return batch; +} + +static struct xsk_tx_batch +xsk_tx_peek_release_shared_desc_batch(struct xsk_buff_pool *pool, u32 max_descs) +{ + u32 cq_descs_before, cq_descs_after; + struct xsk_tx_batch sum_batch = {}; + bool budget_exhausted; + u32 per_socket_budget; + struct xdp_sock *xs; + + /* The fairness quota must allow one maximum-sized valid packet. */ + per_socket_budget = max_t(u32, MAX_PER_SOCKET_BUDGET, + pool->xdp_zc_max_segs); + +again: + budget_exhausted = false; + cq_descs_before = xsk_tx_batch_cq_descs(&sum_batch); + list_for_each_entry_rcu(xs, &pool->xsk_tx_list, tx_list) { + u32 budget, budget_left, offset, remaining, used; + struct xsk_tx_batch curr_batch; + + /* Once reclaim-only descriptors have been appended to the CQ + * address area, do not append driver-visible Tx descriptors + * from another socket after them. xsk_tx_completed() relies on + * all driver-visible descriptors preceding all reclaim-only + * descriptors in CQ order. + */ + if (sum_batch.reclaim_descs) + break; + + /* be gentle when playing with pool->tx_descs */ + offset = xsk_tx_batch_cq_descs(&sum_batch); + if (offset >= max_descs) + break; + + if (xs->tx_budget_spent >= per_socket_budget) { + if (xskq_cons_nb_entries(xs->tx, 1)) + budget_exhausted = true; + continue; + } + + budget_left = per_socket_budget - xs->tx_budget_spent; + remaining = max_descs - offset; + budget = min(remaining, budget_left); + + curr_batch = __xsk_tx_peek_release_desc_batch(pool, xs, + pool->tx_descs + offset, + budget); + used = xsk_tx_batch_cq_descs(&curr_batch); + if (!used) { + if (curr_batch.budget_limited && budget_left < remaining) + budget_exhausted = true; + continue; + } + + xs->tx_budget_spent += used; + sum_batch.tx_descs += curr_batch.tx_descs; + sum_batch.reclaim_descs = curr_batch.reclaim_descs; + } + + cq_descs_after = xsk_tx_batch_cq_descs(&sum_batch); + + if (sum_batch.reclaim_descs || cq_descs_after >= max_descs) + return sum_batch; + + /* Continue filling the batch while this pass made progress */ + if (cq_descs_before != cq_descs_after) + goto again; + + if (!budget_exhausted) + return sum_batch; + + list_for_each_entry_rcu(xs, &pool->xsk_tx_list, tx_list) + xs->tx_budget_spent = 0; + goto again; +} + u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, u32 nb_pkts) { + struct xsk_tx_batch batch = {}; struct xdp_sock *xs; + bool umem_shared; rcu_read_lock(); - if (!list_is_singular(&pool->xsk_tx_list)) { - /* Fallback to the non-batched version */ - rcu_read_unlock(); - return xsk_tx_peek_release_fallback(pool, nb_pkts); - } + if (unlikely(READ_ONCE(pool->reclaim_descs))) + goto out; - xs = list_first_or_null_rcu(&pool->xsk_tx_list, struct xdp_sock, tx_list); - if (!xs) { - nb_pkts = 0; + xs = list_first_or_null_rcu(&pool->xsk_tx_list, struct xdp_sock, + tx_list); + if (!xs) goto out; - } - nb_pkts = xskq_cons_nb_entries(xs->tx, nb_pkts); + nb_pkts = min(nb_pkts, pool->tx_descs_nentries); + if (!nb_pkts) + goto out; + + umem_shared = !list_is_singular(&pool->xsk_tx_list); + + if (umem_shared && !(pool->umem->flags & XDP_UMEM_SG_FLAG)) { + rcu_read_unlock(); + return xsk_tx_peek_release_fallback(pool, nb_pkts); + } /* This is the backpressure mechanism for the Tx path. Try to * reserve space in the completion queue for all packets, but @@ -603,19 +753,16 @@ u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, u32 nb_pkts) if (!nb_pkts) goto out; - nb_pkts = xskq_cons_read_desc_batch(xs->tx, pool, nb_pkts); - if (!nb_pkts) { - xs->tx->queue_empty_descs++; - goto out; - } - - __xskq_cons_release(xs->tx); - xskq_prod_write_addr_batch(pool->cq, pool->tx_descs, nb_pkts); - xs->sk.sk_write_space(&xs->sk); + batch = umem_shared ? + xsk_tx_peek_release_shared_desc_batch(pool, nb_pkts) : + __xsk_tx_peek_release_desc_batch(pool, xs, + pool->tx_descs, + nb_pkts); + xsk_tx_commit_batch(pool, &batch); out: rcu_read_unlock(); - return nb_pkts; + return batch.tx_descs; } EXPORT_SYMBOL(xsk_tx_peek_release_desc_batch); diff --git a/net/xdp/xsk_buff_pool.c b/net/xdp/xsk_buff_pool.c index 12c9fb29af05..a4089480b22b 100644 --- a/net/xdp/xsk_buff_pool.c +++ b/net/xdp/xsk_buff_pool.c @@ -51,6 +51,7 @@ int xp_alloc_tx_descs(struct xsk_buff_pool *pool, struct xdp_sock *xs, if (!pool->tx_descs) return -ENOMEM; + pool->tx_descs_nentries = nentries; return 0; } diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h index 3e3fbb73d23e..1bc42c8902f4 100644 --- a/net/xdp/xsk_queue.h +++ b/net/xdp/xsk_queue.h @@ -58,6 +58,17 @@ struct parsed_desc { u32 valid; }; +struct xsk_tx_batch { + u32 tx_descs; + u32 reclaim_descs; + bool budget_limited; +}; + +static inline u32 xsk_tx_batch_cq_descs(const struct xsk_tx_batch *batch) +{ + return batch->tx_descs + batch->reclaim_descs; +} + /* The structure of the shared state of the rings are a simple * circular buffer, as outlined in * Documentation/core-api/circular-buffers.rst. For the Rx and @@ -263,17 +274,18 @@ static inline void parse_desc(struct xsk_queue *q, struct xsk_buff_pool *pool, parsed->mb = xp_mb_desc(desc); } -static inline -u32 xskq_cons_read_desc_batch(struct xsk_queue *q, struct xsk_buff_pool *pool, - u32 max) +static inline struct xsk_tx_batch +xskq_cons_read_desc_batch(struct xdp_sock *xs, struct xsk_buff_pool *pool, + struct xdp_desc *descs, u32 max) { - u32 cached_cons = q->cached_cons, nb_entries = 0; - struct xdp_desc *descs = pool->tx_descs; - u32 total_descs = 0, nr_frags = 0; + bool drain = READ_ONCE(xs->drain_cont); + u32 cached_cons, nb_entries = 0; + struct xsk_tx_batch batch = {}; + struct xsk_queue *q = xs->tx; + u32 nr_frags = 0; + + cached_cons = q->cached_cons; - /* track first entry, if stumble upon *any* invalid descriptor, rewind - * current packet that consists of frags and stop the processing - */ while (cached_cons != q->cached_prod && nb_entries < max) { struct xdp_rxtx_ring *ring = (struct xdp_rxtx_ring *)q->ring; u32 idx = cached_cons & q->ring_mask; @@ -283,25 +295,42 @@ u32 xskq_cons_read_desc_batch(struct xsk_queue *q, struct xsk_buff_pool *pool, cached_cons++; parse_desc(q, pool, &descs[nb_entries], &parsed); if (unlikely(!parsed.valid)) - break; + drain = true; + + nr_frags++; + nb_entries++; if (likely(!parsed.mb)) { - total_descs += (nr_frags + 1); - nr_frags = 0; - } else { - nr_frags++; - if (nr_frags == pool->xdp_zc_max_segs) { + if (unlikely(drain)) { + batch.reclaim_descs = nr_frags; + WRITE_ONCE(xs->drain_cont, false); nr_frags = 0; break; } + + batch.tx_descs += nr_frags; + nr_frags = 0; + continue; + } + + if (nr_frags == pool->xdp_zc_max_segs) + drain = true; + } + + if (nr_frags) { + if (drain) { + batch.reclaim_descs = nr_frags; + WRITE_ONCE(xs->drain_cont, true); + } else { + if (nb_entries == max) + batch.budget_limited = true; + cached_cons -= nr_frags; } - nb_entries++; } - cached_cons -= nr_frags; /* Release valid plus any invalid entries */ xskq_cons_release_n(q, cached_cons - q->cached_cons); - return total_descs; + return batch; } /* Functions for consumers */ -- cgit v1.2.3 From c5b1ca6a02886f00170ed91b757e244f23259e91 Mon Sep 17 00:00:00 2001 From: Maciej Fijalkowski Date: Sun, 19 Jul 2026 15:56:08 +0200 Subject: selftests/xsk: fix too-many-frags multi-buffer Tx test The too-many-frags test describes a packet that is valid from the Tx ring ownership point of view, but invalid for transmission because it exceeds the supported number of fragments. Keep the generated Tx descriptors valid so that __send_pkts() accounts them as outstanding descriptors that must be reclaimed through the CQ. Then mark the corresponding Rx packet invalid so the test still does not expect the oversized packet to appear on the receive side. Add a valid synchronization packet after the oversized packet so the test can verify that the Tx path drains the bad packet and resumes at the next packet boundary. Reviewed-by: Jason Xing Signed-off-by: Maciej Fijalkowski Acked-by: Stanislav Fomichev Link: https://patch.msgid.link/20260719135609.147823-6-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/bpf/prog_tests/test_xsk.c | 24 ++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/test_xsk.c b/tools/testing/selftests/bpf/prog_tests/test_xsk.c index 6eb9096d084c..de17dd48f176 100644 --- a/tools/testing/selftests/bpf/prog_tests/test_xsk.c +++ b/tools/testing/selftests/bpf/prog_tests/test_xsk.c @@ -2270,7 +2270,7 @@ int testapp_too_many_frags(struct test_spec *test) max_frags += 1; } - pkts = calloc(2 * max_frags + 2, sizeof(struct pkt)); + pkts = calloc(2 * max_frags + 3, sizeof(struct pkt)); if (!pkts) return TEST_FAILURE; @@ -2288,24 +2288,30 @@ int testapp_too_many_frags(struct test_spec *test) } pkts[max_frags].options = 0; - /* An invalid packet with the max amount of frags but signals packet - * continues on the last frag - */ - for (i = max_frags + 1; i < 2 * max_frags + 1; i++) { + /* An invalid packet with the max + 1 amount of frags */ + for (i = max_frags + 1; i < 2 * max_frags + 2; i++) { pkts[i].len = MIN_PKT_SIZE; pkts[i].options = XDP_PKT_CONTD; - pkts[i].valid = false; + pkts[i].valid = true; } + pkts[2 * max_frags + 1].options = 0; /* Valid packet for synch */ - pkts[2 * max_frags + 1].len = MIN_PKT_SIZE; - pkts[2 * max_frags + 1].valid = true; + pkts[2 * max_frags + 2].len = MIN_PKT_SIZE; + pkts[2 * max_frags + 2].valid = true; - if (pkt_stream_generate_custom(test, pkts, 2 * max_frags + 2)) { + if (pkt_stream_generate_custom(test, pkts, 2 * max_frags + 3)) { free(pkts); return TEST_FAILURE; } + /* The generated Tx stream must keep the too-big packet valid so that + * __send_pkts() accounts its descriptors in outstanding_tx. The Rx + * stream, however, must not expect this packet on the wire. + */ + test->ifobj_rx->xsk->pkt_stream->pkts[2].valid = false; + test->ifobj_rx->xsk->pkt_stream->nb_valid_entries--; + ret = testapp_validate_traffic(test); free(pkts); return ret; -- cgit v1.2.3 From f49d99eaee7c32badc7ddfaecbb01ce4d037d695 Mon Sep 17 00:00:00 2001 From: Maciej Fijalkowski Date: Sun, 19 Jul 2026 15:56:09 +0200 Subject: selftests/xsk: account reclaimed invalid Tx descriptors Invalid Tx descriptors are now returned through the completion ring, regardless of whether they form a standalone packet or belong to an invalid multi-buffer packet. The selftests previously counted only descriptors belonging to valid packets, with a special exception for some invalid multi-buffer packets in verbatim streams. This undercounts completion entries when a standalone invalid descriptor or another invalid packet is reclaimed by the kernel. Keep valid_pkts as the number of packets expected on the Rx side, but count every descriptor submitted to the Tx ring in valid_frags, as every such descriptor is now expected to be returned through the completion ring. Make fragment counting in verbatim mode follow the packet boundary instead of stopping at the first invalid fragment. Update custom stream generation so an invalid middle fragment terminates the generated Rx packet while Tx completion accounting still covers the complete invalid packet. Also add explicit end fragments after invalid middle descriptors. This exercises the kernel drain logic and verifies that subsequent valid packets are not interpreted as continuations of the invalid packet. Reviewed-by: Jason Xing Signed-off-by: Maciej Fijalkowski Acked-by: Stanislav Fomichev Link: https://patch.msgid.link/20260719135609.147823-7-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/bpf/prog_tests/test_xsk.c | 26 ++++++++++++----------- 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/test_xsk.c b/tools/testing/selftests/bpf/prog_tests/test_xsk.c index de17dd48f176..38ce6060b8fa 100644 --- a/tools/testing/selftests/bpf/prog_tests/test_xsk.c +++ b/tools/testing/selftests/bpf/prog_tests/test_xsk.c @@ -427,14 +427,14 @@ static u32 pkt_nb_frags(u32 frame_size, struct pkt_stream *pkt_stream, struct pk } /* Search for the end of the packet in verbatim mode */ - if (!pkt_continues(pkt->options) || !pkt->valid) + if (!pkt_continues(pkt->options)) return nb_frags; next_frag = pkt_stream->current_pkt_nb; pkt++; while (next_frag++ < pkt_stream->nb_pkts) { nb_frags++; - if (!pkt_continues(pkt->options) || !pkt->valid) + if (!pkt_continues(pkt->options)) break; pkt++; } @@ -665,11 +665,11 @@ static struct pkt_stream *__pkt_stream_generate_custom(struct ifobject *ifobj, s if (!frame->valid || !pkt_continues(frame->options)) payload++; } else { - if (frame->valid) + if (frame->valid) { len += frame->len; - if (frame->valid && pkt_continues(frame->options)) - continue; - + if (pkt_continues(frame->options)) + continue; + } pkt->pkt_nb = pkt_nb; pkt->len = len; pkt->valid = frame->valid; @@ -1250,10 +1250,9 @@ static int __send_pkts(struct ifobject *ifobject, struct xsk_socket_info *xsk, } } - if (pkt && pkt->valid) { + if (pkt && pkt->valid) valid_pkts++; - valid_frags += nb_frags; - } + valid_frags += nb_frags; } pthread_mutex_lock(&pacing_mutex); @@ -2099,13 +2098,16 @@ int testapp_invalid_desc_mb(struct test_spec *test) {0, 0, 0, false, 0}, /* Invalid address in the second frame */ {0, XSK_UMEM__LARGE_FRAME_SIZE, 0, false, XDP_PKT_CONTD}, - {umem_sz, XSK_UMEM__LARGE_FRAME_SIZE, 0, false, XDP_PKT_CONTD}, + {umem_sz * 2, XSK_UMEM__LARGE_FRAME_SIZE, 0, false, XDP_PKT_CONTD}, + {0, MIN_PKT_SIZE, 0, false, 0}, /* Invalid len in the middle */ {0, XSK_UMEM__LARGE_FRAME_SIZE, 0, false, XDP_PKT_CONTD}, {0, XSK_UMEM__INVALID_FRAME_SIZE, 0, false, XDP_PKT_CONTD}, + {0, MIN_PKT_SIZE, 0, false, 0}, /* Invalid options in the middle */ {0, XSK_UMEM__LARGE_FRAME_SIZE, 0, false, XDP_PKT_CONTD}, {0, XSK_UMEM__LARGE_FRAME_SIZE, 0, false, XSK_DESC__INVALID_OPTION}, + {0, MIN_PKT_SIZE, 0, false, 0}, /* Transmit 2 frags, receive 3 */ {0, XSK_UMEM__MAX_FRAME_SIZE, 0, true, XDP_PKT_CONTD}, {0, XSK_UMEM__MAX_FRAME_SIZE, 0, true, 0}, @@ -2117,8 +2119,8 @@ int testapp_invalid_desc_mb(struct test_spec *test) if (umem->unaligned_mode) { /* Crossing a chunk boundary allowed */ - pkts[12].valid = true; - pkts[13].valid = true; + pkts[15].valid = true; + pkts[16].valid = true; } test->mtu = MAX_ETH_JUMBO_SIZE; -- cgit v1.2.3 From 39d6e68f50f4a444a6ba23b9ea2eaee806601c6d Mon Sep 17 00:00:00 2001 From: Nicolas Schier Date: Thu, 23 Jul 2026 12:58:45 +0200 Subject: kbuild: Stop modifying $(objtree)/Makefile when building oot-kmods oos Update output Makefile in the corresponding tree only: for out-of-source in-tree builds update $(objtree)/Makefile, for out-of-source out-of-tree module builds update $(KBUILD_EXTMOD_OUTPUT)/Makefile instead. In-source builds are not affected. Since commit c9bb03ac2c66 ("kbuild: reduce output spam when building out of tree"), building out-of-tree kernel modules out-of-source (make M=... MO=...) causes a rewrite of $(objtree)/Makefile with KBUILD_EXTMOD and KBUILD_EXTMOD_OUTPUT being set. That is problematic: * $(objtree)/ must not be changed in any way when building out-of-tree modules as it breaks other uses of $(objtree). * Setting KBUILD_EXTMOD and KBUILD_EXTMOD_OUTPUT in $(objtree)/Makefile kills the tree for incremental builds that start right there ('make -C $(objtree)'); builds starting in $(srctree) reset $(objtree)/Makefile to its original content. Further, $(KBUILD_EXTMOD_OUTPUT)/Makefile was not generated any more at all. This commit restores the previous kbuild behaviour prior to commit c9bb03ac2c66 ("kbuild: reduce output spam when building out of tree") but leaves in-place the use of filechk for output spam reduction. Fixes: c9bb03ac2c66 ("kbuild: reduce output spam when building out of tree") Reported-by: Anish Rashinkar Closes: https://lore.kernel.org/r/CAOESE2Q2-0KUDaM0mUo+c_F-tMaUsBZ-gpnhdoe0rmYdgnnuJQ@mail.gmail.com Cc: stable@vger.kernel.org Tested-by: Philipp Hahn Reviewed-by: Philipp Hahn Signed-off-by: Nicolas Schier Signed-off-by: Nicolas Schier Link: https://patch.msgid.link/20260723105845.1704689-2-nsc@kernel.org Signed-off-by: Nathan Chancellor --- Makefile | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/Makefile b/Makefile index 11539c3fd405..17d34968b7f0 100644 --- a/Makefile +++ b/Makefile @@ -695,13 +695,11 @@ filechk_makefile = { \ echo "include $(abs_srctree)/Makefile"; \ } -$(objtree)/Makefile: FORCE +PHONY += $(CURDIR)/Makefile +$(CURDIR)/Makefile: FORCE $(call filechk,makefile) -# Prevent $(srcroot)/Makefile from inhibiting the rule to run. -PHONY += $(objtree)/Makefile - -outputmakefile: $(objtree)/Makefile +outputmakefile: $(CURDIR)/Makefile ifeq ($(KBUILD_EXTMOD),) @if [ -f $(srctree)/.config -o \ -d $(srctree)/include/config -o \ -- cgit v1.2.3 From 2c1bd78dc8e2221549409769a76c39304b82a1b0 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Tue, 14 Jul 2026 14:59:44 +0200 Subject: dpll: use pin owner's dpll ref for pin-level attribute reporting Commit c191b319f208 ("dpll: allow registering FW-identified pin with a different DPLL") relaxed dpll_pin_register() to let fwnode-identified pins register with DPLLs from a different driver. This allows, for example, the ICE driver to register a zl3073x-created pin with its TXC DPLL using ice_dpll_txclk_ops, which lack frequency_get and phase_adjust_get callbacks. After such cross-driver registration, the pin's dpll_refs xarray contains refs from both drivers. dpll_cmd_pin_get_one() calls dpll_xa_ref_dpll_first() which returns the ref with the lowest DPLL id. When the foreign DPLL (e.g. ICE TXC) has a lower id than the owner DPLL (e.g. zl3073x), the foreign ops are used for reporting. Since those ops lack callbacks like frequency_get, pin-level attributes are silently omitted from the netlink response. For example, a zl3073x output pin that should report frequency and phase-adjust shows neither: Before: # dpll pin show id 45 pin id 45: module-name: zl3073x clock-id: 3427468959636104019 board-label: 156M25_NAC0_CLKREF_SYNC package-label: OUT3 type: synce-eth-port capabilities: 0x0 phase-adjust-min: -2147483648 phase-adjust-max: 2147483647 phase-adjust-gran: 800 parent-device: ... After: # dpll pin show id 19 pin id 19: module-name: zl3073x clock-id: 15964355450360090479 board-label: 156M25_NAC0_CLKREF_SYNC package-label: OUT3 type: synce-eth-port frequency: 156250000 Hz frequency-supported: 156250000 Hz capabilities: 0x0 phase-adjust-min: -2147483648 phase-adjust-max: 2147483647 phase-adjust-gran: 800 phase-adjust: 0 parent-device: ... Fix this by: 1. Adding dpll_pin_own_dpll_ref_first() helper that returns the first ref whose DPLL matches the pin's (module, clock_id) tuple -- i.e. the DPLL from the driver that created the pin and has the complete set of ops. Return NULL if no owner ref is found. 2. Using dpll_pin_own_dpll_ref_first() in dpll_cmd_pin_get_one() with a fallback to dpll_xa_ref_dpll_first() for pin-on-pin child pins whose dpll_refs all point to a different driver's DPLLs. 3. Using dpll_pin_own_dpll_ref_first() in SET operations (dpll_pin_freq_set, dpll_pin_esync_set, dpll_pin_ref_sync_state_set, dpll_pin_phase_adj_set) returning -ENODEV if no owner ref exists. Replacing the validation loops that rejected the entire operation when any ref's ops lacked the required callback -- instead validate only the owner refs so that foreign DPLLs with incomplete ops no longer block SET operations. 4. Guarding all SET and rollback xa_for_each loops against NULL set callbacks so that foreign refs without the operation are safely skipped instead of causing a NULL pointer dereference. Fixes: c191b319f208 ("dpll: allow registering FW-identified pin with a different DPLL") Signed-off-by: Ivan Vecera Acked-by: Vadim Fedorenko Link: https://patch.msgid.link/20260714125945.1823269-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski --- drivers/dpll/dpll_core.c | 27 ++++++++++++++++++++ drivers/dpll/dpll_core.h | 1 + drivers/dpll/dpll_netlink.c | 60 +++++++++++++++++++++++++++++++++++++-------- 3 files changed, 78 insertions(+), 10 deletions(-) diff --git a/drivers/dpll/dpll_core.c b/drivers/dpll/dpll_core.c index 2e8690cb3c16..43d51d942ead 100644 --- a/drivers/dpll/dpll_core.c +++ b/drivers/dpll/dpll_core.c @@ -1142,6 +1142,33 @@ void *dpll_pin_on_pin_priv(struct dpll_pin *parent, return reg->priv; } +/** + * dpll_pin_own_dpll_ref_first - find the first owner dpll ref of a pin + * @pin: pointer to a dpll pin + * + * Search pin's dpll_refs for a ref whose dpll matches the pin's + * (module, clock_id) tuple, i.e. the dpll registered by the driver + * that created the pin. This ensures pin-level attributes are + * reported and modified using the owner's ops even when the pin is + * also registered with dplls from other drivers. + * + * Return: pointer to the owner's dpll_pin_ref, or NULL if no + * owner ref is found. + */ +struct dpll_pin_ref *dpll_pin_own_dpll_ref_first(struct dpll_pin *pin) +{ + struct dpll_pin_ref *ref; + unsigned long i; + + xa_for_each(&pin->dpll_refs, i, ref) { + if (ref->dpll->module == pin->module && + ref->dpll->clock_id == pin->clock_id) + return ref; + } + + return NULL; +} + const struct dpll_pin_ops *dpll_pin_ops(struct dpll_pin_ref *ref) { struct dpll_pin_registration *reg; diff --git a/drivers/dpll/dpll_core.h b/drivers/dpll/dpll_core.h index e24577113431..da8a369556ed 100644 --- a/drivers/dpll/dpll_core.h +++ b/drivers/dpll/dpll_core.h @@ -93,6 +93,7 @@ void *dpll_pin_on_pin_priv(struct dpll_pin *parent, struct dpll_pin *pin); const struct dpll_device_ops *dpll_device_ops(struct dpll_device *dpll); struct dpll_device *dpll_device_get_by_id(int id); +struct dpll_pin_ref *dpll_pin_own_dpll_ref_first(struct dpll_pin *pin); const struct dpll_pin_ops *dpll_pin_ops(struct dpll_pin_ref *ref); struct dpll_pin_ref *dpll_xa_ref_dpll_first(struct xarray *xa_refs); extern struct xarray dpll_device_xa; diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c index 5703667593a7..afb31c004038 100644 --- a/drivers/dpll/dpll_netlink.c +++ b/drivers/dpll/dpll_netlink.c @@ -699,7 +699,9 @@ dpll_cmd_pin_get_one(struct sk_buff *msg, struct dpll_pin *pin, struct dpll_pin_ref *ref; int ret; - ref = dpll_xa_ref_dpll_first(&pin->dpll_refs); + ref = dpll_pin_own_dpll_ref_first(pin); + if (!ref) + ref = dpll_xa_ref_dpll_first(&pin->dpll_refs); ASSERT_NOT_NULL(ref); ret = dpll_msg_add_pin_handle(msg, pin); @@ -1090,12 +1092,19 @@ dpll_pin_freq_set(struct dpll_pin *pin, struct nlattr *a, xa_for_each(&pin->dpll_refs, i, ref) { ops = dpll_pin_ops(ref); - if (!ops->frequency_set || !ops->frequency_get) { - NL_SET_ERR_MSG(extack, "frequency set not supported by the device"); + if ((!ops->frequency_set || !ops->frequency_get) && + ref->dpll->module == pin->module && + ref->dpll->clock_id == pin->clock_id) { + NL_SET_ERR_MSG(extack, + "frequency set not supported by the device"); return -EOPNOTSUPP; } } - ref = dpll_xa_ref_dpll_first(&pin->dpll_refs); + ref = dpll_pin_own_dpll_ref_first(pin); + if (!ref) { + NL_SET_ERR_MSG(extack, "pin owner dpll not found"); + return -ENODEV; + } ops = dpll_pin_ops(ref); dpll = ref->dpll; ret = ops->frequency_get(pin, dpll_pin_on_dpll_priv(dpll, pin), dpll, @@ -1109,6 +1118,8 @@ dpll_pin_freq_set(struct dpll_pin *pin, struct nlattr *a, xa_for_each(&pin->dpll_refs, i, ref) { ops = dpll_pin_ops(ref); + if (!ops->frequency_set) + continue; dpll = ref->dpll; ret = ops->frequency_set(pin, dpll_pin_on_dpll_priv(dpll, pin), dpll, dpll_priv(dpll), freq, extack); @@ -1128,6 +1139,8 @@ rollback: if (ref == failed) break; ops = dpll_pin_ops(ref); + if (!ops->frequency_set) + continue; dpll = ref->dpll; if (ops->frequency_set(pin, dpll_pin_on_dpll_priv(dpll, pin), dpll, dpll_priv(dpll), old_freq, extack)) @@ -1151,13 +1164,19 @@ dpll_pin_esync_set(struct dpll_pin *pin, struct nlattr *a, xa_for_each(&pin->dpll_refs, i, ref) { ops = dpll_pin_ops(ref); - if (!ops->esync_set || !ops->esync_get) { + if ((!ops->esync_set || !ops->esync_get) && + ref->dpll->module == pin->module && + ref->dpll->clock_id == pin->clock_id) { NL_SET_ERR_MSG(extack, "embedded sync feature is not supported by this device"); return -EOPNOTSUPP; } } - ref = dpll_xa_ref_dpll_first(&pin->dpll_refs); + ref = dpll_pin_own_dpll_ref_first(pin); + if (!ref) { + NL_SET_ERR_MSG(extack, "pin owner dpll not found"); + return -ENODEV; + } ops = dpll_pin_ops(ref); dpll = ref->dpll; ret = ops->esync_get(pin, dpll_pin_on_dpll_priv(dpll, pin), dpll, @@ -1181,6 +1200,8 @@ dpll_pin_esync_set(struct dpll_pin *pin, struct nlattr *a, void *pin_dpll_priv; ops = dpll_pin_ops(ref); + if (!ops->esync_set) + continue; dpll = ref->dpll; pin_dpll_priv = dpll_pin_on_dpll_priv(dpll, pin); ret = ops->esync_set(pin, pin_dpll_priv, dpll, dpll_priv(dpll), @@ -1204,6 +1225,8 @@ rollback: if (ref == failed) break; ops = dpll_pin_ops(ref); + if (!ops->esync_set) + continue; dpll = ref->dpll; pin_dpll_priv = dpll_pin_on_dpll_priv(dpll, pin); if (ops->esync_set(pin, pin_dpll_priv, dpll, dpll_priv(dpll), @@ -1238,8 +1261,11 @@ dpll_pin_ref_sync_state_set(struct dpll_pin *pin, NL_SET_ERR_MSG(extack, "reference sync pin not available"); return -EINVAL; } - ref = dpll_xa_ref_dpll_first(&pin->dpll_refs); - ASSERT_NOT_NULL(ref); + ref = dpll_pin_own_dpll_ref_first(pin); + if (!ref) { + NL_SET_ERR_MSG(extack, "pin owner dpll not found"); + return -ENODEV; + } ops = dpll_pin_ops(ref); if (!ops->ref_sync_set || !ops->ref_sync_get) { NL_SET_ERR_MSG(extack, "reference sync not supported by this pin"); @@ -1258,6 +1284,8 @@ dpll_pin_ref_sync_state_set(struct dpll_pin *pin, return 0; xa_for_each(&pin->dpll_refs, i, ref) { ops = dpll_pin_ops(ref); + if (!ops->ref_sync_set) + continue; dpll = ref->dpll; ret = ops->ref_sync_set(pin, dpll_pin_on_dpll_priv(dpll, pin), ref_sync_pin, @@ -1280,6 +1308,8 @@ rollback: if (ref == failed) break; ops = dpll_pin_ops(ref); + if (!ops->ref_sync_set) + continue; dpll = ref->dpll; if (ops->ref_sync_set(pin, dpll_pin_on_dpll_priv(dpll, pin), ref_sync_pin, @@ -1471,12 +1501,18 @@ dpll_pin_phase_adj_set(struct dpll_pin *pin, struct nlattr *phase_adj_attr, xa_for_each(&pin->dpll_refs, i, ref) { ops = dpll_pin_ops(ref); - if (!ops->phase_adjust_set || !ops->phase_adjust_get) { + if ((!ops->phase_adjust_set || !ops->phase_adjust_get) && + ref->dpll->module == pin->module && + ref->dpll->clock_id == pin->clock_id) { NL_SET_ERR_MSG(extack, "phase adjust not supported"); return -EOPNOTSUPP; } } - ref = dpll_xa_ref_dpll_first(&pin->dpll_refs); + ref = dpll_pin_own_dpll_ref_first(pin); + if (!ref) { + NL_SET_ERR_MSG(extack, "pin owner dpll not found"); + return -ENODEV; + } ops = dpll_pin_ops(ref); dpll = ref->dpll; ret = ops->phase_adjust_get(pin, dpll_pin_on_dpll_priv(dpll, pin), @@ -1491,6 +1527,8 @@ dpll_pin_phase_adj_set(struct dpll_pin *pin, struct nlattr *phase_adj_attr, xa_for_each(&pin->dpll_refs, i, ref) { ops = dpll_pin_ops(ref); + if (!ops->phase_adjust_set) + continue; dpll = ref->dpll; ret = ops->phase_adjust_set(pin, dpll_pin_on_dpll_priv(dpll, pin), @@ -1513,6 +1551,8 @@ rollback: if (ref == failed) break; ops = dpll_pin_ops(ref); + if (!ops->phase_adjust_set) + continue; dpll = ref->dpll; if (ops->phase_adjust_set(pin, dpll_pin_on_dpll_priv(dpll, pin), dpll, dpll_priv(dpll), old_phase_adj, -- cgit v1.2.3 From a3729e0df005a936ceb3c2b0d167f01a2b03f970 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonas=20K=C3=B6ppeler?= Date: Mon, 20 Jul 2026 23:14:52 +0200 Subject: net/sched: sch_cake: skip clearing unused tins during rate adjustment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When cake_configure_rates() is called from the dequeue path with rate_adjust=true, it only needs to update the rate parameters. The loop that clears the unused tins is both unnecessary and harmful in this path: - cake_clear_tin() overwrites q->cur_tin and q->cur_flow, which are actively used by cake_dequeue(), corrupting the dequeue state. - iterating over the unused tins and their internal queues to purge packets adds needless overhead to the hot path. Skip the entire loop when rate_adjust is set, as neither cake_clear_tin() nor the mtu_time update are needed when only the rate changes. The clearing loop runs on every rate adjustment from the dequeue path, clearing (max_tins - cur_tins) tins each time, so the cost grows the fewer tins the configured mode actually uses. Testing cake_mq over veth (8 rx/tx queues, 2 Gbit limit) with flent's [1] rrul and tcp_nup tests and 32 TCP upstreams shows a large drop in loaded latency and a throughput gain, restoring behaviour to pre-15c2715a5264 levels: +------------+------+------+-------+-------+---------+ | kernel | mode | test | base | load | tput | | | | | (ms) | (ms) | (Mbit) | +------------+------+------+-------+-------+---------+ | net-next | be | rrul | 0.810 | 11.78 | 1469.67 | | net-next | be | nup | 0.637 | 85.71 | 1243.15 | | net-next | ds3 | rrul | 0.397 | 15.28 | 1770.06 | | net-next | ds3 | nup | 0.351 | 15.98 | 1799.39 | +------------+------+------+-------+-------+---------+ | patched | be | rrul | 0.092 | 0.56 | 1873.40 | | patched | be | nup | 0.109 | 1.82 | 1869.12 | | patched | ds3 | rrul | 0.097 | 0.98 | 1866.10 | | patched | ds3 | nup | 0.101 | 0.51 | 1861.79 | +------------+------+------+-------+-------+---------+ The same trend holds on real hardware (IPQ8074A, 4 rx/tx queues, OpenWrt): in besteffort mode the tcp_nup loaded latency drops from ~470 ms to ~4 ms. [1] https://flent.org Fixes: 15c2715a5264 ("net/sched: sch_cake: fixup cake_mq rate adjustment for diffserv config") Signed-off-by: Jonas Köppeler Tested-by: Mike Pham Acked-by: Toke Høiland-Jørgensen Link: https://patch.msgid.link/20260720-sch_cake-skip-clearing-tins-v2-1-e6a8b0275c73@tu-berlin.de Signed-off-by: Jakub Kicinski --- net/sched/sch_cake.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index 505f63fecf64..f64be54ead49 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -2609,9 +2609,11 @@ static void cake_configure_rates(struct Qdisc *sch, u64 rate, bool rate_adjust) break; } - for (c = qd->tin_cnt; c < CAKE_MAX_TINS; c++) { - cake_clear_tin(sch, c); - qd->tins[c].cparams.mtu_time = qd->tins[ft].cparams.mtu_time; + if (!rate_adjust) { + for (c = qd->tin_cnt; c < CAKE_MAX_TINS; c++) { + cake_clear_tin(sch, c); + qd->tins[c].cparams.mtu_time = qd->tins[ft].cparams.mtu_time; + } } qd->rate_ns = qd->tins[ft].tin_rate_ns; -- cgit v1.2.3 From 817ff6efdb7f484ea547218e11e17d8e43daa3b4 Mon Sep 17 00:00:00 2001 From: Chengfeng Ye Date: Sun, 19 Jul 2026 22:57:40 +0800 Subject: net: pktgen: fix proc entry use-after-free pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock. pktgen_remove_device() removes the same entry before _rem_dev_from_if_list() takes that lock. This allows the following interleaving: CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend) if_lock(t) proc_remove(pkt_dev->entry) proc_remove(pkt_dev->entry) pkt_dev->entry = proc_create_data(...) if_unlock(t) The kthread can pass the stale proc_dir_entry to proc_remove() after the rename path has freed it. A reproducer with a widened race window reports: BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80 Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67 Call Trace: proc_remove+0x78/0x80 pktgen_remove_device.isra.0+0x11c/0x4c0 pktgen_thread_worker+0x1214/0x6bc0 kthread+0x2c6/0x3b0 Allocated by task 95: __proc_create+0x204/0x790 proc_create_data+0x72/0xe0 pktgen_thread_write+0xd61/0x1510 Freed by task 28: kmem_cache_free+0xcb/0x3d0 proc_free_inode+0x5b/0x80 rcu_core+0x50a/0x1850 The buggy address belongs to the object at ffff8881478fea00 which belongs to the cache proc_dir_entry of size 192 Move proc_remove() into the if_lock-protected list removal helper. Keep it before list_del_rcu() to preserve the ordering required by add_device(). The rename path must then finish replacing the entry before removal, or it observes that the device is no longer on the list. Fixes: 39df232f1a9b ("[PKTGEN]: fix device name handling") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260719145740.2888967-1-nicoyip.dev@gmail.com Signed-off-by: Jakub Kicinski --- net/core/pktgen.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 8e185b318288..ee64f3012321 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -3972,6 +3972,7 @@ static void _rem_dev_from_if_list(struct pktgen_thread *t, struct pktgen_dev *p; if_lock(t); + proc_remove(pkt_dev->entry); list_for_each_safe(q, n, &t->if_list) { p = list_entry(q, struct pktgen_dev, list); if (p == pkt_dev) @@ -4001,9 +4002,6 @@ static int pktgen_remove_device(struct pktgen_thread *t, * list to determine if interface already exist, avoid race * with proc_create_data() */ - proc_remove(pkt_dev->entry); - - /* And update the thread if_list */ _rem_dev_from_if_list(t, pkt_dev); #ifdef CONFIG_XFRM -- cgit v1.2.3 From d0d6415963040c401e7a7e4e482a698ba52448cb Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 22 Jul 2026 20:19:25 +0100 Subject: veth: convert frag_list skbs before running XDP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A frag_list skb can reach veth with data_len set but nr_frags zero. veth_convert_skb_to_xdp_buff() only converts skbs that are shared, locked, have frags[], or do not have enough headroom. It later uses skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and xdp_frags_size. That exposes frag_list data to XDP as if it were stored in frags[], but frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment metadata, walk an empty fragment entry, and crash in memcpy() from __xsk_rcv(). Route non-linear skbs through skb_pp_cow_data() before exposing them to XDP, and only advertise XDP frags when the resulting skb has frags[]. skb_copy_bits() already handles frag_list input, and skb_pp_cow_data() builds frags[] output with skb_add_rx_frag(), which is the representation XDP multi-buffer expects. Fixes: 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb") Cc: stable@vger.kernel.org Signed-off-by: Matt Fleming Reviewed-by: Toke Høiland-Jørgensen Acked-by: Lorenzo Bianconi Link: https://patch.msgid.link/20260722191925.2192070-1-matt@readmodwrite.com Signed-off-by: Jakub Kicinski --- drivers/net/veth.c | 4 ++-- net/core/skbuff.c | 18 ++++++++++++------ 2 files changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 1c5142149175..00e34afd858e 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -756,7 +756,7 @@ static int veth_convert_skb_to_xdp_buff(struct veth_rq *rq, u32 frame_sz; if (skb_shared(skb) || skb_head_is_locked(skb) || - skb_shinfo(skb)->nr_frags || + skb_is_nonlinear(skb) || skb_headroom(skb) < XDP_PACKET_HEADROOM) { if (skb_pp_cow_data(rq->page_pool, pskb, XDP_PACKET_HEADROOM)) goto drop; @@ -771,7 +771,7 @@ static int veth_convert_skb_to_xdp_buff(struct veth_rq *rq, xdp_prepare_buff(xdp, skb->head, skb_headroom(skb), skb_headlen(skb), true); - if (skb_is_nonlinear(skb)) { + if (skb_shinfo(skb)->nr_frags) { skb_shinfo(skb)->xdp_frags_size = skb->data_len; xdp_buff_set_frags_flag(xdp); } else { diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 18dabb4e9cfa..ba3dbac80fb4 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -927,6 +927,18 @@ static void skb_clone_fraglist(struct sk_buff *skb) skb_get(list); } +/** + * skb_pp_cow_data() - copy skb data into page-pool backed storage + * @pool: page pool to allocate from + * @pskb: pointer to skb pointer, replaced with the copied skb on success + * @headroom: headroom to reserve in the copied skb + * + * skb_copy_bits() handles both frags[] and frag_list input. If the copied + * skb remains non-linear, it uses frags[], which is the representation used + * by XDP multi-buffer. + * + * Return: 0 on success or a negative errno on failure. + */ int skb_pp_cow_data(struct page_pool *pool, struct sk_buff **pskb, unsigned int headroom) { @@ -936,12 +948,6 @@ int skb_pp_cow_data(struct page_pool *pool, struct sk_buff **pskb, int err, i, head_off; void *data; - /* XDP does not support fraglist so we need to linearize - * the skb. - */ - if (skb_has_frag_list(skb)) - return -EOPNOTSUPP; - max_head_size = SKB_WITH_OVERHEAD(PAGE_SIZE - headroom); if (skb->len > max_head_size + MAX_SKB_FRAGS * PAGE_SIZE) return -ENOMEM; -- cgit v1.2.3 From 21e19688433452dfbbbe6b2bb670dea6eb92f0f6 Mon Sep 17 00:00:00 2001 From: Norbert Szetei Date: Sat, 25 Jul 2026 08:33:45 +0200 Subject: ALSA: seq: Fix division by zero in initialize_timer() A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set the backing snd_timer's hardware resolution to an arbitrary 64-bit value via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero. When such a timer is bound to a sequencer queue, initialize_timer() computes the tick period as tmr->ticks = 1000000000 / (r * freq); where r is that user-controlled resolution and freq is the sequencer update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250). A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for any even freq, including DEFAULT_FREQUENCY (1000), so the division faults with a divide-by-zero. The division runs under tmr->lock with interrupts disabled, so the oops leaves the spinlock held and hangs the CPU. It is reachable by an unprivileged user with access to /dev/snd/timer and /dev/snd/seq. Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+ RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0 snd_seq_timer_start+0x15e/0x2b0 snd_seq_control_queue+0x56f/0xba0 snd_seq_write+0x3e0/0x730 Reject an overflowing product with check_mul_overflow() and fall back to a single tick, which also avoids feeding a wrapped-but-nonzero divisor (e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small value) into the period computation. Fixes: 37745918e0e7 ("ALSA: timer: Introduce virtual userspace-driven timers") Cc: Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Norbert Szetei Link: https://patch.msgid.link/DF8A3844-AD5E-4B8A-9CFC-BD83C212BA38@doyensec.com Signed-off-by: Takashi Iwai --- sound/core/seq/seq_timer.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/sound/core/seq/seq_timer.c b/sound/core/seq/seq_timer.c index 419288eec4bb..7b671e270ef4 100644 --- a/sound/core/seq/seq_timer.c +++ b/sound/core/seq/seq_timer.c @@ -362,11 +362,10 @@ static int initialize_timer(struct snd_seq_timer *tmr) tmr->ticks = 1; if (!(t->hw.flags & SNDRV_TIMER_HW_SLAVE)) { unsigned long r = snd_timer_resolution(tmr->timeri); - if (r) { - tmr->ticks = (unsigned int)(1000000000uL / (r * freq)); - if (! tmr->ticks) - tmr->ticks = 1; - } + unsigned long den; + + if (r && !check_mul_overflow(r, freq, &den)) + tmr->ticks = max(1U, (unsigned int)(1000000000uL / den)); } tmr->initialized = 1; return 0; -- cgit v1.2.3 From 015b5bcbcb622b32317642be91a7f79aa5413649 Mon Sep 17 00:00:00 2001 From: Karl Mehltretter Date: Sun, 19 Jul 2026 14:11:40 +0200 Subject: pinctrl: devicetree: don't free uninitialized dev_name on error path dt_remember_or_free_map() duplicates dev_name for each map entry. If kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps entries, including entries that have not been initialized. Some pinctrl drivers, including pinctrl-imx, allocate the map with kmalloc() and leave dev_name for the core to initialize. The untouched entries therefore contain uninitialized data which is passed to kfree_const(). Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection while binding the pinctrl-consuming device, under KASAN: BUG: KASAN: double-free in dt_free_map+0x34/0xa4 Free of addr c425a900 by task init/1 kfree from dt_free_map+0x34/0xa4 dt_free_map from dt_remember_or_free_map+0x184/0x198 dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8 pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0 Initialize all dev_name fields to NULL before duplicating the device name, making the full-map cleanup safe after a partial failure. Fixes: be4c60b563ed ("pinctrl: devicetree: Avoid taking direct reference to device name string") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-fable-5 Signed-off-by: Karl Mehltretter Signed-off-by: Linus Walleij --- drivers/pinctrl/devicetree.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c index 02a271dd292f..465b43092eb7 100644 --- a/drivers/pinctrl/devicetree.c +++ b/drivers/pinctrl/devicetree.c @@ -69,6 +69,10 @@ static int dt_remember_or_free_map(struct pinctrl *p, const char *statename, int i; struct pinctrl_dt_map *dt_map; + /* Initialize dev_name before any allocation can fail */ + for (i = 0; i < num_maps; i++) + map[i].dev_name = NULL; + /* Initialize common mapping table entry fields */ for (i = 0; i < num_maps; i++) { const char *devname; -- cgit v1.2.3 From 25cb6e9a13123d1039cdc75b446ac52e1ebdc26d Mon Sep 17 00:00:00 2001 From: Benjamin Boortz Date: Sun, 19 Jul 2026 11:41:46 +0200 Subject: pinctrl: microchip-sgpio: add missing select REGMAP_MMIO The driver calls ocelot_regmap_from_resource() via , which internally uses devm_regmap_init_mmio() and requires REGMAP_MMIO. The Kconfig entry does not select REGMAP_MMIO, causing a build failure when no other driver in the config happens to pull in REGMAP_MMIO: include/linux/mfd/ocelot.h:34:24: error: implicit declaration of function 'devm_regmap_init_mmio' Found by randconfig testing on arm64; tinyconfig reproducer below. Fixes: 2afbbab45c26 ("pinctrl: microchip-sgpio: update to support regmap") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Boortz Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/pinctrl/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index c2cdd7b2c49b..23ea76dc6261 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -426,6 +426,7 @@ config PINCTRL_MICROCHIP_SGPIO select GENERIC_PINCONF select GENERIC_PINCTRL_GROUPS select GENERIC_PINMUX_FUNCTIONS + select REGMAP_MMIO help Support for the serial GPIO interface used on Microsemi and Microchip SoCs. By using a serial interface, the SIO -- cgit v1.2.3 From ffe8a0c6b55285ceaf2f42fc20c3a0594d14f1e9 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Mon, 20 Jul 2026 11:28:44 -0500 Subject: pinctrl-amd: Don't clear S4 wake bits at probe commit 6bc3462a0f5e ("pinctrl: amd: Mask wake bits on probe again") introduced a regression where Wake-on-LAN no longer works after suspend or shutdown on some AMD platforms. Firmware-programmed S4 wake bits for devices like PCIe NICs using PCI PME are cleared at probe, but nothing restores them. Unlike S0i3/S3 wake sources that use enable_irq_wake() -> amd_gpio_irq_set_wake(), PCIe PME does not use GPIO IRQ infrastructure and relies on firmware configuration. The original intent of commit 6bc3462a0f5e ("pinctrl: amd: Mask wake bits on probe again") was to clear spurious wake bits left by firmware to prevent unwanted wakeups. However, S4 wake bits are used for hardware-level wake sources like WoL that bypass the kernel's IRQ wake API. Fix by preserving S4 wake bits at probe and only clearing S0i3/S3 bits: - Firmware-configured S4 wake sources (WoL) continue working - Kernel maintains control of S3/S0i3 wake policy via set_wake() - S3-only wake sources work correctly per commit f31f33dbb3ba ("pinctrl: amd: Take suspend type into consideration which pins are non-wake") The trade-off is that firmware-programmed spurious S4 wake bits remain set, but this is less problematic than breaking WoL. Fixes: 6bc3462a0f5e ("pinctrl: amd: Mask wake bits on probe again") Signed-off-by: Mario Limonciello Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index e3128b0045d2..15a398bb3be2 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -884,8 +884,7 @@ static void amd_gpio_irq_init(struct amd_gpio *gpio_dev) u32 pin_reg, mask; int i; - mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3) | - BIT(WAKE_CNTRL_OFF_S4); + mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3); for (i = 0; i < desc->npins; i++) { int pin = desc->pins[i].number; -- cgit v1.2.3 From dad6e107b3cd9d20514e7799b7ad8674f81e3f30 Mon Sep 17 00:00:00 2001 From: Benjamin Boortz Date: Mon, 20 Jul 2026 19:51:04 +0200 Subject: pinctrl: bm1880: add missing select GENERIC_PINCONF drivers/pinctrl/pinctrl-bm1880.c initialises its pinconf_ops with .is_generic = true, but that field is only present when CONFIG_GENERIC_PINCONF is enabled (guarded by #ifdef in pinconf.h). The Kconfig entry for PINCTRL_BM1880 never selects GENERIC_PINCONF, so any config that enables CONFIG_PINCTRL_BM1880=y without CONFIG_GENERIC_PINCONF=y fails to compile: drivers/pinctrl/pinctrl-bm1880.c:1288:10: error: 'const struct pinconf_ops' has no member named 'is_generic' Found by randconfig testing on arm64; tinyconfig reproducer below. Add the missing select to fix the build. Fixes: 49bd61ebce5f ("pinctrl: Add pinconf support for BM1880 SoC") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Boortz Signed-off-by: Linus Walleij --- drivers/pinctrl/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 23ea76dc6261..eda54aa5fde6 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -166,6 +166,7 @@ config PINCTRL_BM1880 depends on OF && (ARCH_BITMAIN || COMPILE_TEST) default ARCH_BITMAIN select PINMUX + select GENERIC_PINCONF help Pinctrl driver for Bitmain BM1880 SoC. -- cgit v1.2.3 From 6437033bffe8bd2af174d139af552d90d40c7ac6 Mon Sep 17 00:00:00 2001 From: Xu Rao Date: Thu, 23 Jul 2026 16:57:10 +0800 Subject: ALSA: lx6464es: fix period byte count for 16-bit streams The lx6464es driver advertises both 16-bit and packed 24-bit PCM formats, but lx_trigger_start() and lx_interrupt_request_new_buffer() calculate the DMA period size as runtime->period_size * runtime->channels * 3. That is only correct for the packed 24-bit formats. For 16-bit streams the driver submits buffers that are 50% larger than the actual ALSA period and advances the DMA address by the same wrong amount. For example, with 2 channels, 256 frames and 4 periods, the third buffer already extends beyond the ALSA buffer and the fourth buffer starts outside it. Use snd_pcm_lib_period_bytes() so the byte count matches the runtime format, channel count and period size. Fixes: 02bec4904508 ("ALSA: lx6464es - driver for the digigram lx6464es interface") Cc: stable@vger.kernel.org Signed-off-by: Xu Rao Link: https://patch.msgid.link/8BB12E8D92A7CDBA+20260723085710.2567463-1-raoxu@uniontech.com Signed-off-by: Takashi Iwai --- sound/pci/lx6464es/lx6464es.c | 5 +---- sound/pci/lx6464es/lx_core.c | 5 +---- 2 files changed, 2 insertions(+), 8 deletions(-) diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c index 96df00db51d5..3b40ec071379 100644 --- a/sound/pci/lx6464es/lx6464es.c +++ b/sound/pci/lx6464es/lx6464es.c @@ -402,11 +402,8 @@ static void lx_trigger_start(struct lx6464es *chip, struct lx_stream *lx_stream) int err; - const u32 channels = substream->runtime->channels; - const u32 bytes_per_frame = channels * 3; - const u32 period_size = substream->runtime->period_size; const u32 periods = substream->runtime->periods; - const u32 period_bytes = period_size * bytes_per_frame; + const u32 period_bytes = snd_pcm_lib_period_bytes(substream); dma_addr_t buf = substream->dma_buffer.addr; int i; diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c index 6f0843cfb3be..9909f1067871 100644 --- a/sound/pci/lx6464es/lx_core.c +++ b/sound/pci/lx6464es/lx_core.c @@ -969,10 +969,7 @@ static int lx_interrupt_request_new_buffer(struct lx6464es *chip, const unsigned int is_capture = lx_stream->is_capture; int err; - const u32 channels = substream->runtime->channels; - const u32 bytes_per_frame = channels * 3; - const u32 period_size = substream->runtime->period_size; - const u32 period_bytes = period_size * bytes_per_frame; + const u32 period_bytes = snd_pcm_lib_period_bytes(substream); const u32 pos = lx_stream->frame_pos; const u32 next_pos = ((pos+1) == substream->runtime->periods) ? 0 : pos + 1; -- cgit v1.2.3 From bf4fc9f33ec21595143132a3e7fb8b5d2c2261cd Mon Sep 17 00:00:00 2001 From: Madhavender Singh Date: Thu, 23 Jul 2026 16:17:36 +0530 Subject: ALSA: hda/realtek: Add mute LED quirk for HP Laptop 14s-dr1xxx This laptop with an ALC236 codec requires the ALC236_FIXUP_HP_MUTE_LED_COEFBIT2 fixup for its mute LED to function correctly. Add the subsystem ID 0x103c:0x86c8 to the quirk table to apply this fixup. Signed-off-by: Madhavender Singh Link: https://patch.msgid.link/20260723104736.23386-1-madhav@disroot.org Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index fcc60e64137d..c246086c5082 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -7142,6 +7142,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x86c1, "HP Laptop 15-da3001TU", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO), + SND_PCI_QUIRK(0x103c, 0x86c8, "HP Laptop 14s-dr1xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), SND_PCI_QUIRK(0x103c, 0x86e7, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x863e, "HP Spectre x360 15-df1xxx", ALC285_FIXUP_HP_SPECTRE_X360_DF1), SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), -- cgit v1.2.3 From 8c63f59dcf474f5843d71fb58281a8329be5b034 Mon Sep 17 00:00:00 2001 From: Lianqin Hu Date: Fri, 24 Jul 2026 12:46:33 +0000 Subject: ALSA: usb-audio: Add iface reset and delay quirk for JKY Technology Q2A Setting up the interface when suspended/resuming fails on this card. Adding a reset and delay quirk will eliminate this problem. Note: This device's VID conflicts with Apple's (0x05ac). usb 1-1: New USB device found, idVendor=05ac, idProduct=110b usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: Q2A usb 1-1: Manufacturer: JKY Technology usb 1-1: SerialNumber: 330270D2251225 Suggested-by: Rong Zhang Signed-off-by: Lianqin Hu Reviewed-by: Rong Zhang Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/TYUPR06MB6217566CFD33F57D3AE46816D2CF2@TYUPR06MB6217.apcprd06.prod.outlook.com --- sound/usb/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 49b56287cdb9..40aa40fccb46 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2200,6 +2200,9 @@ struct usb_audio_quirk_flags_table { static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { /* Device and string descriptor matches */ + DEVICE_STRING_FLG(0x05ac, 0x110b, /* VID conflicts with Apple */ + "JKY Technology", NULL, /* Q2A */ + QUIRK_FLAG_FORCE_IFACE_RESET | QUIRK_FLAG_IFACE_DELAY), /* Device matches */ DEVICE_FLG(0x001f, 0x0b21, /* AB13X USB Audio */ -- cgit v1.2.3 From 26a94400ffa4fcbeff32e23abebb83a1a20eb401 Mon Sep 17 00:00:00 2001 From: Eckhart Mohr Date: Fri, 24 Jul 2026 21:00:13 +0200 Subject: ALSA: hda/realtek: Add quirk for TongFang X6SP45xU TongFang X6KK45xU and X6SP45xU have actually different PCI IDs. This patch Adds the missing PCI ID to fix headphone detection and clarifies the naming. Fixes: d595255241e5 ("ALSA: hda/realtek: Add quirk for TongFang X6xx45xU") Signed-off-by: Eckhart Mohr Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach Link: https://patch.msgid.link/20260724190109.169889-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index c246086c5082..a0abb8993440 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -8036,7 +8036,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1d05, 0x300f, "TongFang X6AR5xxY", ALC2XX_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1d05, 0x3019, "TongFang X6FR5xxY", ALC2XX_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1d05, 0x3031, "TongFang X6AR55xU", ALC2XX_FIXUP_HEADSET_MIC), - SND_PCI_QUIRK(0x1d05, 0x3034, "TongFang X6xx45xU", ALC2XX_FIXUP_HEADSET_MIC), + SND_PCI_QUIRK(0x1d05, 0x3033, "TongFang X6SP45xU", ALC2XX_FIXUP_HEADSET_MIC), + SND_PCI_QUIRK(0x1d05, 0x3034, "TongFang X6KK45xU", ALC2XX_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1d17, 0x3288, "Haier Boyue G42", ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS), SND_PCI_QUIRK(0x1d72, 0x1602, "RedmiBook", ALC255_FIXUP_XIAOMI_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1701, "XiaomiNotebook Pro", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE), -- cgit v1.2.3 From cd74e5cba460e9ba604e9a418317e38cf50401c8 Mon Sep 17 00:00:00 2001 From: Marcos Paulo Medeiros Date: Sat, 25 Jul 2026 18:41:31 -0300 Subject: ALSA: hda/realtek: Fix headset mic on Acer Nitro 5 AN515-46 The Acer Nitro 5 AN515-46 (SSID 1025:159e, Realtek ALC287) has a combo headset jack whose microphone does not work out of the box: the BIOS leaves pin 0x19 unconfigured, so no headset mic is created. Apply ALC2XX_FIXUP_HEADSET_MIC, the same fixup already used by the sibling models AN515-57 (1025:1539) and AN517-55 (1025:1597), which makes the headset microphone work correctly. Tested on an Acer Nitro 5 AN515-46 by overriding the model via a patch firmware with model=alc2xx-fixup-headset-mic. Signed-off-by: Marcos Paulo Medeiros Link: https://patch.msgid.link/20260725214131.25872-1-maarcospm1996@gmail.com Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index a0abb8993440..9533be5c398b 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -6940,6 +6940,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x1539, "Acer Nitro 5 AN515-57", ALC2XX_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1025, 0x159c, "Acer Nitro 5 AN515-58", ALC287_FIXUP_ACER_MICMUTE_LED), SND_PCI_QUIRK(0x1025, 0x1597, "Acer Nitro 5 AN517-55", ALC2XX_FIXUP_HEADSET_MIC), + SND_PCI_QUIRK(0x1025, 0x159e, "Acer Nitro 5 AN515-46", ALC2XX_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1025, 0x160e, "Acer PT316-51S", ALC2XX_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1025, 0x161f, "Acer S40-54", ALC256_FIXUP_ACER_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1025, 0x1640, "Acer Aspire A315-44P", ALC256_FIXUP_ACER_SFG16_MICMUTE_LED), -- cgit v1.2.3 From 4a05b2d1b4642df74f30b6f54843e825c4a2bfd3 Mon Sep 17 00:00:00 2001 From: Baul Lee Date: Sun, 26 Jul 2026 14:13:37 +0900 Subject: ALSA: usb-audio: fix use-after-free in ump_to_endpoint() create_midi2_ump() registers a card-owned snd_ump_endpoint and stores a back-pointer to its per-interface snd_usb_midi2_ump object in ump->private_data, but it never installs an ump->private_free hook and never clears that pointer. If a later step of snd_usb_midi_v2_create() fails, its error path calls free_all_midi2_umps(), which kfree()s the snd_usb_midi2_ump object while the already-registered endpoint keeps pointing at it. The created /dev/snd/umpC*D* node stays exposed, so the first operation of any UMP open, ump_to_endpoint(), dereferences the dangling ump->private_data and reads rmidi->eps[dir] out of freed memory. A malicious USB MIDI 2.0 device that makes creation fail after the endpoint is registered can thus trigger a slab use-after-free read on a subsequent open of the UMP node. Clear the endpoint's back-pointer before freeing the object, and let ump_to_endpoint() tolerate a NULL private_data so the open/close/trigger callbacks fail cleanly (their callers already handle a NULL endpoint) instead of dereferencing a stale pointer. Discovered by XBOW, triaged by Baul Lee Fixes: ff49d1df79ae ("ALSA: usb-audio: USB MIDI 2.0 UMP support") Reported-by: Federico Kirschbaum Reported-by: Baul Lee Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Link: https://patch.msgid.link/20260726051337.41124-1-baul.lee@xbow.com Signed-off-by: Takashi Iwai --- sound/usb/midi2.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/usb/midi2.c b/sound/usb/midi2.c index 3ec633291772..83980fb83ac8 100644 --- a/sound/usb/midi2.c +++ b/sound/usb/midi2.c @@ -329,7 +329,7 @@ ump_to_endpoint(struct snd_ump_endpoint *ump, int dir) { struct snd_usb_midi2_ump *rmidi = ump->private_data; - return rmidi->eps[dir]; + return rmidi ? rmidi->eps[dir] : NULL; } /* ump open callback */ @@ -685,6 +685,8 @@ static void free_all_midi2_umps(struct snd_usb_midi2_interface *umidi) rmidi = list_first_entry(&umidi->rawmidi_list, struct snd_usb_midi2_ump, list); list_del(&rmidi->list); + if (rmidi->ump) + rmidi->ump->private_data = NULL; kfree(rmidi); } } -- cgit v1.2.3 From 70c977815af0d997feb2d0c5d284d55689bf7051 Mon Sep 17 00:00:00 2001 From: Baul Lee Date: Sun, 26 Jul 2026 14:16:33 +0900 Subject: ALSA: ump: fix double free of out_cvts on rawmidi error snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with kfree() but leaves ump->out_cvts pointing at the freed memory. When the endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts a second time, resulting in a double free. The host snd-usb-audio driver attaches the legacy rawmidi for any USB MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail reaches this path on enumeration. Clear ump->out_cvts after freeing it on the error path so it is not freed again during teardown. Discovered by XBOW, triaged by Baul Lee Fixes: 33cd7630782d ("ALSA: ump: Export MIDI1 / UMP conversion helpers") Reported-by: Federico Kirschbaum Reported-by: Baul Lee Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Link: https://patch.msgid.link/20260726051633.41206-1-baul.lee@xbow.com Signed-off-by: Takashi Iwai --- sound/core/ump.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/core/ump.c b/sound/core/ump.c index 70520c7ca293..632c13baf21e 100644 --- a/sound/core/ump.c +++ b/sound/core/ump.c @@ -1365,6 +1365,7 @@ int snd_ump_attach_legacy_rawmidi(struct snd_ump_endpoint *ump, &rmidi); if (err < 0) { kfree(ump->out_cvts); + ump->out_cvts = NULL; return err; } -- cgit v1.2.3 From 441aaad150c57edaf57ee482a79a3bf4c5b7e353 Mon Sep 17 00:00:00 2001 From: Baul Lee Date: Sun, 26 Jul 2026 15:50:20 +0900 Subject: ALSA: usb-audio: fix stack info leak in RME Digiface status snd_rme_digiface_read_status() reads a four-word status block from the device into an uninitialised on-stack __le32 buf[4] and, whenever the vendor control-IN transfer does not return a negative error, copies all four words into the caller's status[]. snd_usb_ctl_msg() copies the full requested size back into the caller's buffer regardless of how many bytes the data stage actually delivered: buf = kmemdup(data, size, GFP_KERNEL); err = usb_control_msg(dev, pipe, request, requesttype, value, index, buf, size, timeout); memcpy(data, buf, size); usb_control_msg() returns the transferred length on a short control-IN, which is a non-negative value, and writes only that many bytes. The remainder of the copy back is the kmemdup()ed image of the caller's buffer, so a device answering with a short data stage leaves the trailing words of buf[] holding leftover kernel stack. The only guard in the caller is err < 0, so those words are stored into status[]. They then reach user space: snd_rme_digiface_get_status_val() selects a 16-bit halfword of status[] per the control's reg/mask, and the eight Digiface status controls together expose the whole 16-byte frame to an unprivileged reader of /dev/snd/controlC*. Zero-initialise the buffer so a short read yields zeros instead of stack residue. This mirrors snd_rme_get_status1(), which already clears its output word before the same kind of vendor read. Discovered by XBOW, triaged by Baul Lee Fixes: 611a96f6acf2 ("ALSA: usb-audio: Add mixer quirk for RME Digiface USB") Reported-by: Federico Kirschbaum Reported-by: Baul Lee Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Link: https://patch.msgid.link/20260726065020.46070-1-baul.lee@xbow.com Signed-off-by: Takashi Iwai --- sound/usb/mixer_quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 10792d26fa94..74d26fd86efb 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -3496,7 +3496,7 @@ static int snd_rme_digiface_read_status(struct snd_kcontrol *kcontrol, u32 statu struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol); struct snd_usb_audio *chip = list->mixer->chip; struct usb_device *dev = chip->dev; - __le32 buf[4]; + __le32 buf[4] = {}; int err; err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), -- cgit v1.2.3 From 0970274613fb463d376211450cab066d34ebfe6a Mon Sep 17 00:00:00 2001 From: Baul Lee Date: Sun, 26 Jul 2026 16:45:00 +0900 Subject: ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output() snd_usbmidi_akai_output() computes its fill-loop bound buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1; as a signed int, so a small device-advertised bulk-OUT max_transfer makes buf_end negative. The loop guard then compares the u32 urb->transfer_buffer_length against that negative int: the usual arithmetic conversion turns buf_end into a large unsigned value, so the guard stays true and each iteration keeps appending SysEx framing and payload bytes past the end of the URB transfer buffer, which is only max_transfer bytes long. A USB device that advertises a tiny bulk-OUT endpoint can therefore trigger an attacker-length- and content-controlled heap out-of-bounds write when a process writes to the created /dev/snd/midiC*D* node. Return early when there is no room for even one SysEx, so the loop is never entered with a bound that would wrap. The loop is the last statement of the function, so bailing out is equivalent to it not running. Discovered by XBOW, triaged by Baul Lee Fixes: 4434ade8c933 ("ALSA: usb-audio: add support for Akai MPD16") Suggested-by: Takashi Iwai Reported-by: Federico Kirschbaum Reported-by: Baul Lee Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Link: https://patch.msgid.link/20260726074500.50145-1-baul.lee@xbow.com Signed-off-by: Takashi Iwai --- sound/usb/midi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/midi.c b/sound/usb/midi.c index d87e3f357cf7..f8996416c3be 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -797,6 +797,8 @@ static void snd_usbmidi_akai_output(struct snd_usb_midi_out_endpoint *ep, msg = urb->transfer_buffer + urb->transfer_buffer_length; buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1; + if (buf_end <= 0) + return; /* only try adding more data when there's space for at least 1 SysEx */ while (urb->transfer_buffer_length < buf_end) { -- cgit v1.2.3 From a54bf16965f896415c3337bc4fbb40fb11941d99 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 26 Jul 2026 09:48:19 +0200 Subject: ALSA: 6fire: Fix UAF at error handling during probe Although 6fire driver had a few fixes for dealing with the early error handling during the probe phase, it forgot a pending URB before freeing the resources, which may lead to a UAF. This patch addresses it by doing the almost same cleanup procedure like the normal disconnect phase at the error path. Reported-and-tested-by: Shuangpeng Bai Closes: https://lore.kernel.org/20260724030900.1984491-1-shuangpeng.kernel@gmail.com Cc: Link: https://patch.msgid.link/20260726074821.2288158-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/6fire/chip.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/usb/6fire/chip.c b/sound/usb/6fire/chip.c index 2c5648966412..6cf410a92fa2 100644 --- a/sound/usb/6fire/chip.c +++ b/sound/usb/6fire/chip.c @@ -150,6 +150,10 @@ static int usb6fire_chip_probe(struct usb_interface *intf, return 0; destroy_chip: + chip->shutdown = true; + if (card) + snd_card_disconnect(card); + usb6fire_chip_abort(chip); snd_card_free(card); return ret; } -- cgit v1.2.3 From fd71820e876ef4b816b6305416ba5973bb6b9665 Mon Sep 17 00:00:00 2001 From: Gunal Seenivasagan Date: Sun, 26 Jul 2026 14:27:11 +0530 Subject: ALSA: hda/realtek: Add quirk for Infinix INBOOK X3 Slim The Infinix INBOOK X3 Slim (ALC269VB, subsystem 0x2782:0250) has its internal speakers wired to pin 0x1b, but the BIOS pin configuration table declares 0x1b as "no physical connection" (0x411111f0). It instead declares pin 0x14 as the internal speaker, although nothing is connected to 0x14. As a result the internal speakers are silent under Linux while the headphone jack works correctly. The codec output path to 0x14 is fully open (DAC assigned and streaming, mixer and pin unmuted, EAPD asserted), so the failure is silent with no error reported. The speakers work under Windows, where the vendor driver supplies its own pin table. Add a fixup that disables the unconnected pin 0x14 and declares pin 0x1b as the internal speaker. Reusing the existing ALC269VC_FIXUP_INFINIX_Y4_MAX was tried first, since it also remaps 0x1b to an internal speaker. It is not sufficient here: it leaves 0x14 declared, so autoconfig finds two line_outs line_outs=2 (0x14/0x1b/0x0/0x0/0x0) type:speaker and binds the primary "Speaker" control to the unconnected pin 0x14 while demoting the working speaker at 0x1b to "Bass Speaker". Audio is audible that way, but the volume and mute controls a desktop actually uses end up attached to a pin that is not wired to anything. Disabling 0x14 is what produces a single correct Speaker output. Verified on the affected machine: with the corrected pin configuration the driver's autoconfig reports line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker both channels play, headphone auto-mute switches correctly in both directions, and audio survives codec runtime suspend (D3) and resume. Signed-off-by: Gunal Seenivasagan Link: https://patch.msgid.link/20260726085715.229802-1-gunal2002@gmail.com Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index 9533be5c398b..09225801a177 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -3949,6 +3949,7 @@ enum { ALC269_FIXUP_DMIC_THINKPAD_ACPI, ALC269VB_FIXUP_INFINIX_ZERO_BOOK_13, ALC269VC_FIXUP_INFINIX_Y4_MAX, + ALC269VB_FIXUP_INFINIX_INBOOK_X3_SLIM, ALC269VC_FIXUP_LUNNEN_GROUND_14, ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO, ALC255_FIXUP_ACER_MIC_NO_PRESENCE, @@ -4421,6 +4422,14 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_LIMIT_INT_MIC_BOOST }, + [ALC269VB_FIXUP_INFINIX_INBOOK_X3_SLIM] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x14, 0x411111f0 }, /* disable, not connected */ + { 0x1b, 0x90170110 }, /* use as internal speaker */ + { } + }, + }, [ALC269VC_FIXUP_LUNNEN_GROUND_14] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -8058,6 +8067,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x2782, 0x0214, "VAIO VJFE-CL", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x2782, 0x0228, "Infinix ZERO BOOK 13", ALC269VB_FIXUP_INFINIX_ZERO_BOOK_13), SND_PCI_QUIRK(0x2782, 0x0232, "CHUWI CoreBook XPro", ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO), + SND_PCI_QUIRK(0x2782, 0x0250, "Infinix INBOOK X3 Slim", ALC269VB_FIXUP_INFINIX_INBOOK_X3_SLIM), SND_PCI_QUIRK(0x2782, 0x1407, "Positivo P15X", ALC269_FIXUP_POSITIVO_P15X_HEADSET_MIC), SND_PCI_QUIRK(0x2782, 0x1409, "Positivo K116J", ALC269_FIXUP_POSITIVO_P15X_HEADSET_MIC), SND_PCI_QUIRK(0x2782, 0x1701, "Infinix Y4 Max", ALC269VC_FIXUP_INFINIX_Y4_MAX), -- cgit v1.2.3 From c2744d5f3aea474513fd2298daecb94a952ce441 Mon Sep 17 00:00:00 2001 From: Norbert Szetei Date: Sun, 26 Jul 2026 10:01:45 +0200 Subject: ALSA: timer: Clear SNDRV_TIMER_IFLG_DEAD once the close completes snd_timer_close_locked() marks an instance with SNDRV_TIMER_IFLG_DEAD and returns early when the flag is already set, but the flag is never cleared again. A completed close ends in remove_slave_links(), which leaves timeri->timer NULL, so a second close is already harmless through the timer == NULL path; the early return can only be reached by an instance that was opened again in between. For such an instance the close unlinks nothing, so snd_timer_instance_free() frees an object that is still on timer->open_list_head, still on snd_timer_master_list if it was opened with a slave key, still owns any adopted slaves, and still holds its timer and module references. snd_seq_timer_open() reopens an instance exactly like that: it retries its fallback open on the same object after a failure that has already run snd_timer_close_locked() internally. An unprivileged user with access to /dev/snd/timer and /dev/snd/seq can force that failure, since snd_timer_check_master() returns -EBUSY when a pending slave matches the new master's (slave_class, slave_id) key and the target timer has reached max_instances, and SNDRV_TIMER_IOCTL_SELECT with dev_class = SNDRV_TIMER_CLASS_SLAVE keeps the caller-supplied dev_sclass, so a sequencer queue's key can be forged. The freed instance is afterwards dereferenced by any further snd_timer_open() on that timer, by snd_timer_check_slave(), and by /proc/asound/timers, which faults on the stale ti->owner pointer. The flag only has to be visible while the close is in progress, which is all its other users need. Clear it in remove_slave_links(), under the same timer->lock that sets it, once the instance is off every list. Fixes: da3039e91d1f ("ALSA: timer: Forcibly close timer instances at closing") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-5 Signed-off-by: Norbert Szetei Link: https://patch.msgid.link/CA41AA48-75BF-45E9-A36D-3A5D2F124F60@doyensec.com Signed-off-by: Takashi Iwai --- sound/core/timer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/core/timer.c b/sound/core/timer.c index 07ef127b29e1..9407954034cf 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -458,6 +458,8 @@ static void remove_slave_links(struct snd_timer_instance *timeri, list_del_init(&slave->ack_list); list_del_init(&slave->active_list); } + /* the close is done; a reopen must not see the mark */ + timeri->flags &= ~SNDRV_TIMER_IFLG_DEAD; } /* -- cgit v1.2.3 From 738e6f32e61d80b554e37015ecb7bc620b88001c Mon Sep 17 00:00:00 2001 From: Peiyang He Date: Mon, 20 Jul 2026 16:50:16 +0800 Subject: iommu/iommufd: Fix IOPF group ownership UAF iopf_group_alloc() links each last-page IOPF group into the generic IOPF pending list before invoking the domain fault handler. iommufd_fault_iopf_handler() also queued an accepted group in the IOMMUFD deliver list without removing it from the generic pending list. When detach or HWPT replacement drops the device's IOPF reference count to zero, an IOMMU driver may call iopf_queue_remove_device(). That function responds to and frees groups through the generic pending list without removing the same groups from IOMMUFD's deliver list or response xarray. A later read, response, or cleanup can then access the freed group and cause a UAF. Fix this by dequeuing an accepted group from the generic pending list before IOMMUFD queues it for userspace response. Make iopf_group_response() send a response regardless of pending-list membership, so the dequeued group can still be completed by IOMMUFD. Link: https://patch.msgid.link/r/3CFD314D0FE4D7EC+20260720085017.3998878-2-peiyang_he@smail.nju.edu.cn Closes: https://lore.kernel.org/all/B4F28798E2E784CA+d29f723c-b2b5-4b67-8d1c-4f7b9b0b27cb@smail.nju.edu.cn/ Fixes: 34765cbc679c ("iommufd: Associate fault object with iommufd_hw_pgtable") Cc: stable@vger.kernel.org Tested-by: Peiyang He Assisted-by: Codex:gpt-5.6-sol Signed-off-by: Peiyang He Reviewed-by: Kevin Tian Signed-off-by: Jason Gunthorpe --- drivers/iommu/io-pgfault.c | 24 +++++++++++++++++++----- drivers/iommu/iommufd/eventq.c | 2 ++ include/linux/iommu.h | 5 +++++ 3 files changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/io-pgfault.c b/drivers/iommu/io-pgfault.c index cca52a34d0ed..c16ff1fc4b95 100644 --- a/drivers/iommu/io-pgfault.c +++ b/drivers/iommu/io-pgfault.c @@ -332,16 +332,30 @@ void iopf_group_response(struct iopf_group *group, .code = status, }; - /* Only send response if there is a fault report pending */ mutex_lock(&fault_param->lock); - if (!list_empty(&group->pending_node)) { - ops->page_response(dev, &group->last_fault, &resp); - list_del_init(&group->pending_node); - } + ops->page_response(dev, &group->last_fault, &resp); + list_del_init(&group->pending_node); mutex_unlock(&fault_param->lock); } EXPORT_SYMBOL_GPL(iopf_group_response); +/** + * iopf_group_dequeue - Dequeue a page fault group from the pending list + * @group: the group to dequeue + * + * The fault handler is responsible for responding to the group after + * this function returns. + */ +void iopf_group_dequeue(struct iopf_group *group) +{ + struct iommu_fault_param *fault_param = group->fault_param; + + mutex_lock(&fault_param->lock); + list_del_init(&group->pending_node); + mutex_unlock(&fault_param->lock); +} +EXPORT_SYMBOL_GPL(iopf_group_dequeue); + /** * iopf_queue_discard_partial - Remove all pending partial fault * @queue: the queue whose partial faults need to be discarded diff --git a/drivers/iommu/iommufd/eventq.c b/drivers/iommu/iommufd/eventq.c index 5129e3bf5461..747dd5155121 100644 --- a/drivers/iommu/iommufd/eventq.c +++ b/drivers/iommu/iommufd/eventq.c @@ -484,6 +484,8 @@ int iommufd_fault_iopf_handler(struct iopf_group *group) hwpt = group->attach_handle->domain->iommufd_hwpt; fault = hwpt->fault; + iopf_group_dequeue(group); + spin_lock(&fault->common.lock); list_add_tail(&group->node, &fault->common.deliver); spin_unlock(&fault->common.lock); diff --git a/include/linux/iommu.h b/include/linux/iommu.h index d20aa6f6863a..ac43b8b93f14 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -1704,6 +1704,7 @@ void iopf_free_group(struct iopf_group *group); int iommu_report_device_fault(struct device *dev, struct iopf_fault *evt); void iopf_group_response(struct iopf_group *group, enum iommu_page_response_code status); +void iopf_group_dequeue(struct iopf_group *group); #else static inline int iopf_queue_add_device(struct iopf_queue *queue, struct device *dev) @@ -1749,5 +1750,9 @@ static inline void iopf_group_response(struct iopf_group *group, enum iommu_page_response_code status) { } + +static inline void iopf_group_dequeue(struct iopf_group *group) +{ +} #endif /* CONFIG_IOMMU_IOPF */ #endif /* __LINUX_IOMMU_H */ -- cgit v1.2.3 From 98b87885de4b7f605533a2860685f5689fce8e82 Mon Sep 17 00:00:00 2001 From: HyeongJun An Date: Tue, 14 Jul 2026 19:49:34 +0900 Subject: scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the target-supplied data segment. The segment carries a 2-byte sense length followed by the sense bytes, so it must hold 2 + senselen bytes, but the bounds check only requires datalen >= senselen: senselen = get_unaligned_be16(data); if (datalen < senselen) goto invalid_datalen; memcpy(sc->sense_buffer, data + 2, min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); A target that returns a SCSI Response whose datalen equals senselen (with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data + 2 read up to two bytes past the received data. Those bytes are stale conn->data contents and end up in the command's sense buffer, which is returned to userspace. Account for the 2-byte sense length prefix in the check. Fixes: 7996a778ff8c ("[SCSI] iscsi: add libiscsi") Suggested-by: Sashiko AI Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Acked-by: Chris Leech Link: https://patch.msgid.link/20260714104934.1404423-1-sammiee5311@gmail.com Signed-off-by: Martin K. Petersen --- drivers/scsi/libiscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 160f02f2f51d..5cbc51899de0 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -918,7 +918,7 @@ invalid_datalen: } senselen = get_unaligned_be16(data); - if (datalen < senselen) + if (datalen < senselen + 2) goto invalid_datalen; memcpy(sc->sense_buffer, data + 2, -- cgit v1.2.3 From c1dea15f819cded9b3faf58f8bec72323568b6e6 Mon Sep 17 00:00:00 2001 From: HyeongJun An Date: Thu, 16 Jul 2026 15:58:48 +0900 Subject: scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer iscsi_tcp_hdr_dissect() receives the data segment of several PDU types into the fixed-size conn->data buffer, which is allocated for ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP, REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU whose DataSegmentLength exceeds that buffer. The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its data segment (sense/response data) into conn->data via iscsi_tcp_data_recv_prep(), but it does so without the same check. The only upstream bound on in.datalen is conn->max_recv_dlength, the initiator's advertised MaxRecvDataSegmentLength, which is commonly negotiated well above 8192 (open-iscsi defaults to 262144). A target that returns a SCSI Response with a DataSegmentLength between 8193 and max_recv_dlength therefore overflows the 8192-byte conn->data buffer. Once the same bound applies, ISCSI_OP_SCSI_CMD_RSP is handled exactly like those responses: bound the data segment, receive it into conn->data when present, and otherwise complete the PDU with no data. Fold the opcode into that case group rather than duplicating the check. Fixes: a081c13e39b5 ("[SCSI] iscsi_tcp: split module into lib and lld") Suggested-by: Chris Leech Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Acked-by: Chris Leech Link: https://patch.msgid.link/20260716065848.1653431-1-sammiee5311@gmail.com Signed-off-by: Martin K. Petersen --- drivers/scsi/libiscsi_tcp.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index e90805ba868f..7223bb18b048 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -752,13 +752,6 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) rc = __iscsi_complete_pdu(conn, hdr, NULL, 0); spin_unlock(&conn->session->back_lock); break; - case ISCSI_OP_SCSI_CMD_RSP: - if (tcp_conn->in.datalen) { - iscsi_tcp_data_recv_prep(tcp_conn); - return 0; - } - rc = iscsi_complete_pdu(conn, hdr, NULL, 0); - break; case ISCSI_OP_R2T: if (ahslen) { rc = ISCSI_ERR_AHSLEN; @@ -766,6 +759,7 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) } rc = iscsi_tcp_r2t_rsp(conn, hdr); break; + case ISCSI_OP_SCSI_CMD_RSP: case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: case ISCSI_OP_REJECT: -- cgit v1.2.3 From 3dbbbf656b850c9c8de05df6ad4a1dfc6ff02845 Mon Sep 17 00:00:00 2001 From: Xingui Yang Date: Thu, 16 Jul 2026 16:11:45 +0800 Subject: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path. Fixes: fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") Signed-off-by: Xingui Yang Reviewed-by: John Garry Link: https://patch.msgid.link/20260716081145.3950172-1-yangxingui@huawei.com Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 10 +-------- drivers/scsi/libsas/sas_init.c | 37 +++++++++++++++++----------------- include/scsi/libsas.h | 1 - 3 files changed, 19 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 213d5b5dea94..8a2500993e19 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -5261,15 +5261,7 @@ static int _resume_v3_hw(struct device *device) return rc; } phys_init_v3_hw(hisi_hba); - - /* - * If a directly-attached disk is removed during suspend, a deadlock - * may occur, as the PHYE_RESUME_TIMEOUT processing will require the - * hisi_hba->device to be active, which can only happen when resume - * completes. So don't wait for the HA event workqueue to drain upon - * resume. - */ - sas_resume_ha_no_sync(sha); + sas_resume_ha(sha); clear_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags); dev_warn(dev, "end of resuming controller\n"); diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index 0bec236f0fb5..c3f3d05b46de 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -410,7 +410,7 @@ static void sas_resume_insert_broadcast_ha(struct sas_ha_struct *ha) } } -static void _sas_resume_ha(struct sas_ha_struct *ha, bool drain) +void sas_resume_ha(struct sas_ha_struct *ha) { const unsigned long tmo = msecs_to_jiffies(25000); int i; @@ -426,6 +426,23 @@ static void _sas_resume_ha(struct sas_ha_struct *ha, bool drain) dev_info(ha->dev, "waiting up to 25 seconds for %d phy%s to resume\n", i, i > 1 ? "s" : ""); wait_event_timeout(ha->eh_wait_q, phys_suspended(ha) == 0, tmo); + + /* + * All phys are back up or timed out. Turn on I/O and drain + * pending work. + */ + scsi_unblock_requests(ha->shost); + sas_drain_work(ha); + + /* + * Send PHYE_RESUME_TIMEOUT after sas_drain_work(). The handler + * calls sas_deform_port() -> sas_destruct_devices(), which removes + * SCSI devices and, for LLDDs using device_link() PM sync, waits + * for the host to be runtime-active. Sending it before the drain + * would deadlock: the drain waits for the handler, the handler + * waits for host resume, and host resume waits for the drain to + * finish. + */ for (i = 0; i < ha->num_phys; i++) { struct asd_sas_phy *phy = ha->sas_phy[i]; @@ -436,12 +453,6 @@ static void _sas_resume_ha(struct sas_ha_struct *ha, bool drain) } } - /* all phys are back up or timed out, turn on i/o so we can - * flush out disks that did not return - */ - scsi_unblock_requests(ha->shost); - if (drain) - sas_drain_work(ha); clear_bit(SAS_HA_RESUMING, &ha->state); sas_queue_deferred_work(ha); @@ -450,20 +461,8 @@ static void _sas_resume_ha(struct sas_ha_struct *ha, bool drain) */ sas_resume_insert_broadcast_ha(ha); } - -void sas_resume_ha(struct sas_ha_struct *ha) -{ - _sas_resume_ha(ha, true); -} EXPORT_SYMBOL(sas_resume_ha); -/* A no-sync variant, which does not call sas_drain_ha(). */ -void sas_resume_ha_no_sync(struct sas_ha_struct *ha) -{ - _sas_resume_ha(ha, false); -} -EXPORT_SYMBOL(sas_resume_ha_no_sync); - void sas_suspend_ha(struct sas_ha_struct *ha) { int i; diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 163f23c92b41..36d4cb567837 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -680,7 +680,6 @@ extern int sas_register_ha(struct sas_ha_struct *); extern int sas_unregister_ha(struct sas_ha_struct *); extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha); extern void sas_resume_ha(struct sas_ha_struct *sas_ha); -extern void sas_resume_ha_no_sync(struct sas_ha_struct *sas_ha); extern void sas_suspend_ha(struct sas_ha_struct *sas_ha); int sas_phy_reset(struct sas_phy *phy, int hard_reset); -- cgit v1.2.3 From 4d5282c06ca198319c2de41b10511ddcb8068f42 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 20 Jul 2026 10:35:52 +0800 Subject: scsi: ufs: dt-bindings: Add missing mcq reg for qcom,sa8255p-ufshc Qualcomm UFS controller found on SoCs SA8255P/SA8797P has a MCQ I/O address space. It should be defined in the bindings even though Linux driver currently doesn't utilize it. Fix the binding before it gets adopted by DTS. Fixes: e2725ed2a7fb ("scsi: ufs: dt-bindings: Document bindings for SA8255P UFS Host Controller") Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260720023552.2667237-1-shengchao.guo@oss.qualcomm.com Signed-off-by: Martin K. Petersen --- Documentation/devicetree/bindings/ufs/qcom,sa8255p-ufshc.yaml | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/ufs/qcom,sa8255p-ufshc.yaml b/Documentation/devicetree/bindings/ufs/qcom,sa8255p-ufshc.yaml index db165a235cb6..66d73e9025d6 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,sa8255p-ufshc.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,sa8255p-ufshc.yaml @@ -18,7 +18,14 @@ properties: - const: qcom,sa8255p-ufshc reg: - maxItems: 1 + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + items: + - const: std + - const: mcq interrupts: maxItems: 1 -- cgit v1.2.3 From 9349dd0646673964eb9e993050526029fc599677 Mon Sep 17 00:00:00 2001 From: Fredric Cover Date: Wed, 22 Jul 2026 14:18:44 -0700 Subject: smb: client: use GFP_KERNEL for registry allocation Currently, cifs_get_swn_reg() allocates new registry entries using GFP_ATOMIC. Since we lock a mutex here, this is clearly not an atomic context. Use GFP_KERNEL instead. Also, fix a minor grammatical error in the comment above the function. Signed-off-by: Fredric Cover Signed-off-by: Steve French --- fs/smb/client/cifs_swn.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/smb/client/cifs_swn.c b/fs/smb/client/cifs_swn.c index 9951817d0d7f..fe10719e627e 100644 --- a/fs/smb/client/cifs_swn.c +++ b/fs/smb/client/cifs_swn.c @@ -425,7 +425,7 @@ static struct cifs_swn_reg *cifs_find_swn_reg(struct cifs_tcon *tcon) /* * Get a registration for the tcon's server and share name, allocating a new one if it does not - * exists + * exist. */ static struct cifs_swn_reg *cifs_get_swn_reg(struct cifs_tcon *tcon) { @@ -443,7 +443,7 @@ static struct cifs_swn_reg *cifs_get_swn_reg(struct cifs_tcon *tcon) goto unlock; } - reg = kmalloc_obj(struct cifs_swn_reg, GFP_ATOMIC); + reg = kmalloc_obj(struct cifs_swn_reg, GFP_KERNEL); if (reg == NULL) { ret = -ENOMEM; goto fail_unlock; @@ -451,7 +451,7 @@ static struct cifs_swn_reg *cifs_get_swn_reg(struct cifs_tcon *tcon) kref_init(®->ref_count); - reg->id = idr_alloc(&cifs_swnreg_idr, reg, 1, 0, GFP_ATOMIC); + reg->id = idr_alloc(&cifs_swnreg_idr, reg, 1, 0, GFP_KERNEL); if (reg->id < 0) { cifs_dbg(FYI, "%s: failed to allocate registration id\n", __func__); ret = reg->id; -- cgit v1.2.3 From 6a3e16d60e81a4aa3056ab15617036cfbea2e07d Mon Sep 17 00:00:00 2001 From: Dawei Feng Date: Sun, 28 Jun 2026 14:59:09 +0800 Subject: smb: client: fix buffer leaks in SMB1 read and write CIFSSMBRead(), CIFSSMBWrite() and CIFSSMBWrite2() allocate a request buffer before checking whether tcon->ses->server is NULL. If that defensive check ever fails, the helper returns -ECONNABORTED without releasing the request buffer. Fix these leaks by releasing the allocated request buffer before returning from these error paths. Use cifs_small_buf_release() for the buffers allocated by small_smb_init() and cifs_buf_release() for the buffer allocated by smb_init(). The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. Runtime validation used a temporary fault-injection hook to force tcon->ses->server to NULL after request-buffer initialization. On the unfixed kernel, the harness observed two leaked small request buffers and one leaked large request buffer, with directed kmemleak dumps confirming the CIFS buffer allocation stacks. After the fix, no CIFS request-buffer deltas remained. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Dawei Feng Signed-off-by: Steve French --- fs/smb/client/cifssmb.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c index 40162d5554ea..1f77512252e7 100644 --- a/fs/smb/client/cifssmb.c +++ b/fs/smb/client/cifssmb.c @@ -1681,8 +1681,10 @@ CIFSSMBRead(const unsigned int xid, struct cifs_io_parms *io_parms, pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid >> 16)); /* tcon and ses pointer are checked in smb_init */ - if (tcon->ses->server == NULL) + if (!tcon->ses->server) { + cifs_small_buf_release(pSMB); return -ECONNABORTED; + } pSMB->AndXCommand = 0xFF; /* none */ pSMB->Fid = netfid; @@ -1796,8 +1798,10 @@ CIFSSMBWrite(const unsigned int xid, struct cifs_io_parms *io_parms, pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid >> 16)); /* tcon and ses pointer are checked in smb_init */ - if (tcon->ses->server == NULL) + if (!tcon->ses->server) { + cifs_buf_release(pSMB); return -ECONNABORTED; + } pSMB->AndXCommand = 0xFF; /* none */ pSMB->Fid = netfid; @@ -2077,8 +2081,10 @@ CIFSSMBWrite2(const unsigned int xid, struct cifs_io_parms *io_parms, pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid >> 16)); /* tcon and ses pointer are checked in smb_init */ - if (tcon->ses->server == NULL) + if (!tcon->ses->server) { + cifs_small_buf_release(pSMB); return -ECONNABORTED; + } pSMB->AndXCommand = 0xFF; /* none */ pSMB->Fid = netfid; -- cgit v1.2.3 From aed0714255c80d143e9f6d4ae00ee14423204ad5 Mon Sep 17 00:00:00 2001 From: Sang-Heon Jeon Date: Fri, 24 Jul 2026 03:45:36 +0900 Subject: smb: client: remove conditional return with no effect Both branches of the check return the same value, so the check has no effect. Remove it and return the value directly. This is the result of running the Coccinelle script from scripts/coccinelle/misc/cond_return_no_effect.cocci. Signed-off-by: Sang-Heon Jeon Signed-off-by: Steve French --- fs/smb/client/smb1maperror.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/fs/smb/client/smb1maperror.c b/fs/smb/client/smb1maperror.c index ab3d09613c91..395299f9121b 100644 --- a/fs/smb/client/smb1maperror.c +++ b/fs/smb/client/smb1maperror.c @@ -234,11 +234,7 @@ int __init smb1_init_maperror(void) if (rc) return rc; - rc = mapping_table_ERRSRV_is_sorted(); - if (rc) - return rc; - - return rc; + return mapping_table_ERRSRV_is_sorted(); } #if IS_ENABLED(CONFIG_SMB1_KUNIT_TESTS) -- cgit v1.2.3 From 455488cd5054bcc59db40fa1cc2c004031a5b2a5 Mon Sep 17 00:00:00 2001 From: Li Qiang Date: Sun, 19 Jul 2026 00:22:27 +0800 Subject: cifs: validate idmap key payload length The cifs.idmap key type stores its payload length in key->datalen, which is limited to U16_MAX. Accepting a larger key payload truncates the recorded length and can make later users interpret the payload using inconsistent bounds. Reject oversized preparsed payloads before allocating or copying them. This keeps key->datalen consistent with the stored data for both inline and separately allocated idmap payloads. Signed-off-by: Li Qiang Signed-off-by: Steve French --- fs/smb/client/cifsacl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/smb/client/cifsacl.c b/fs/smb/client/cifsacl.c index 9424281a7674..12005f46307d 100644 --- a/fs/smb/client/cifsacl.c +++ b/fs/smb/client/cifsacl.c @@ -68,6 +68,9 @@ cifs_idmap_key_instantiate(struct key *key, struct key_preparsed_payload *prep) { char *payload; + if (prep->datalen > U16_MAX) + return -EINVAL; + /* * If the payload is less than or equal to the size of a pointer, then * an allocation here is wasteful. Just copy the data directly to the -- cgit v1.2.3 From 96b2dbbe58a1ea5df8d29c2fe24b5f04715f4443 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Mon, 27 Jul 2026 12:27:39 +0800 Subject: erofs: ensure valid f_path for page cache sharing Previously, backing files for page cache sharing were set up with f_path left as NULL (only f_inode was valid). It worked, but a recent mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on 7.2-rc4): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy) Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 RIP: 0010:__do_sys_mincore+0xc0/0x2c0 ... Specify valid paths using valid disconnected dentries together with erofs_ishare_mnt instead of leaving f_path empty, so they are more like real backing files in a pseudo filesystem and standard backing_file_open() can be used directly. Fixes: e187bc02f8fa ("mm: do file ownership checks with the proper mount idmap") Acked-by: Hongbo Li Signed-off-by: Gao Xiang --- fs/erofs/Kconfig | 1 + fs/erofs/internal.h | 4 ++-- fs/erofs/ishare.c | 58 ++++++++++++++++++++++++++--------------------------- 3 files changed, 31 insertions(+), 32 deletions(-) diff --git a/fs/erofs/Kconfig b/fs/erofs/Kconfig index 4789b1077d8c..1feb28cfe557 100644 --- a/fs/erofs/Kconfig +++ b/fs/erofs/Kconfig @@ -189,6 +189,7 @@ config EROFS_FS_PCPU_KTHREAD_HIPRI config EROFS_FS_PAGE_CACHE_SHARE bool "EROFS page cache share support (experimental)" depends on EROFS_FS && EROFS_FS_XATTR + select FS_STACK help This enables page cache sharing among inodes with identical content fingerprints on the same machine. diff --git a/fs/erofs/internal.h b/fs/erofs/internal.h index 580f8d9f14e7..57bd21859c65 100644 --- a/fs/erofs/internal.h +++ b/fs/erofs/internal.h @@ -288,8 +288,8 @@ struct erofs_inode { struct erofs_inode_fingerprint fingerprint; spinlock_t ishare_lock; }; - /* for each real inode */ - struct inode *sharedinode; + /* for each real filesystem inode */ + struct dentry *sharedentry; }; #endif /* the corresponding vfs inode */ diff --git a/fs/erofs/ishare.c b/fs/erofs/ishare.c index a1a20a5ba548..fa7d4112dec5 100644 --- a/fs/erofs/ishare.c +++ b/fs/erofs/ishare.c @@ -2,14 +2,13 @@ /* * Copyright (C) 2024, Alibaba Cloud */ +#include #include #include #include #include "internal.h" #include "xattr.h" -#include "../internal.h" - static struct vfsmount *erofs_ishare_mnt; static int erofs_ishare_iget5_eq(struct inode *inode, void *data) @@ -33,10 +32,12 @@ static int erofs_ishare_iget5_set(struct inode *inode, void *data) bool erofs_ishare_fill_inode(struct inode *inode) { + static const struct file_operations empty_fops = {}; struct erofs_sb_info *sbi = EROFS_SB(inode->i_sb); const struct address_space_operations *aops; struct erofs_inode *vi = EROFS_I(inode); struct erofs_inode_fingerprint fp; + struct dentry *sd; struct inode *si; aops = erofs_get_aops(inode); @@ -49,7 +50,9 @@ bool erofs_ishare_fill_inode(struct inode *inode) xxh32(fp.opaque, fp.size, 0), erofs_ishare_iget5_eq, erofs_ishare_iget5_set, &fp); if (si && (inode_state_read_once(si) & I_NEW)) { + si->i_fop = &empty_fops; si->i_mapping->a_ops = aops; + si->i_mode = 0444 | S_IFREG; si->i_size = inode->i_size; unlock_new_inode(si); } else { @@ -65,7 +68,10 @@ bool erofs_ishare_fill_inode(struct inode *inode) return false; } } - vi->sharedinode = si; + sd = d_obtain_alias(si); /* disconnected denties for sharedinodes */ + if (IS_ERR(sd)) + return false; + vi->sharedentry = sd; INIT_LIST_HEAD(&vi->ishare_list); spin_lock(&EROFS_I(si)->ishare_lock); list_add(&vi->ishare_list, &EROFS_I(si)->ishare_list); @@ -75,48 +81,40 @@ bool erofs_ishare_fill_inode(struct inode *inode) void erofs_ishare_free_inode(struct inode *inode) { - struct erofs_inode *vi = EROFS_I(inode); - struct inode *sharedinode = vi->sharedinode; + struct erofs_inode *vi = EROFS_I(inode), *svi; - if (!sharedinode) + if (!vi->sharedentry) return; - spin_lock(&EROFS_I(sharedinode)->ishare_lock); + svi = EROFS_I(d_inode(vi->sharedentry)); + spin_lock(&svi->ishare_lock); list_del(&vi->ishare_list); - spin_unlock(&EROFS_I(sharedinode)->ishare_lock); - iput(sharedinode); - vi->sharedinode = NULL; + spin_unlock(&svi->ishare_lock); + dput(vi->sharedentry); + vi->sharedentry = NULL; } static int erofs_ishare_file_open(struct inode *inode, struct file *file) { - struct inode *sharedinode = EROFS_I(inode)->sharedinode; - struct file *realfile; + struct path sharedpath = { + .mnt = erofs_ishare_mnt, + .dentry = EROFS_I(inode)->sharedentry, + }; + struct file *rf; if (file->f_flags & O_DIRECT) return -EINVAL; - realfile = alloc_empty_backing_file(O_RDONLY|O_NOATIME, current_cred(), - file); - if (IS_ERR(realfile)) - return PTR_ERR(realfile); - ihold(sharedinode); - realfile->f_op = &erofs_file_fops; - realfile->f_inode = sharedinode; - realfile->f_mapping = sharedinode->i_mapping; - path_get(&file->f_path); - backing_file_set_user_path(realfile, &file->f_path); - - file_ra_state_init(&realfile->f_ra, file->f_mapping); - realfile->private_data = EROFS_I(inode); - file->private_data = realfile; + + rf = backing_file_open(file, file->f_flags | O_NOATIME, + &sharedpath, current_cred()); + if (IS_ERR(rf)) + return PTR_ERR(rf); + file->private_data = rf; return 0; } static int erofs_ishare_file_release(struct inode *inode, struct file *file) { - struct file *realfile = file->private_data; - - iput(realfile->f_inode); - fput(realfile); + fput(file->private_data); file->private_data = NULL; return 0; } -- cgit v1.2.3 From c9b47e6b23114e939b17f818471c7a46e59006e7 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Tue, 14 Jul 2026 07:47:29 -0400 Subject: erofs: cap LZMA stream pool size fs/erofs/decompressor_lzma.c sizes the module-global MicroLZMA stream pool from num_possible_cpus() when the lzma_streams module parameter is unset, then z_erofs_load_lzma_config() preallocates one image-supplied dictionary per stream, accepting dictionaries up to 8 MiB. On high-CPU systems, a small EROFS image can pin hundreds of MiB of vmalloc-backed decoder state until the erofs module is unloaded. Impact: An EROFS image mounted by the system can pin up to 8 MiB of vmalloc memory per LZMA stream, either as intended or unexpectedly. Bound the default stream count by a new CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS option, default 16, so the worst-case default preallocation is 128 MiB if the number of CPUs is no less than 16 while preserving the existing per-image dictionary limit. An explicit lzma_streams module parameter is still honoured as-is, so administrators who deliberately size the pool are not affected. Fixes: 622ceaddb764 ("erofs: lzma compression support") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Gao Xiang Signed-off-by: Gao Xiang --- fs/erofs/Kconfig | 14 ++++++++++++++ fs/erofs/decompressor_lzma.c | 3 ++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/erofs/Kconfig b/fs/erofs/Kconfig index 1feb28cfe557..8ca1767dafb6 100644 --- a/fs/erofs/Kconfig +++ b/fs/erofs/Kconfig @@ -131,6 +131,20 @@ config EROFS_FS_ZIP_LZMA Say N if you want to disable LZMA compression support. +config EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS + int "EROFS LZMA default maximum decompression streams" + depends on EROFS_FS_ZIP_LZMA + range 1 NR_CPUS + default 16 + help + By default EROFS allocates one LZMA decompression stream per CPU. + Each stream can hold a dictionary of up to 8 MiB taken from the + mounted image, so on systems with many CPUs this can reserve a lot + of memory. This caps the default; the lzma_streams module parameter + still overrides it. + + If unsure, keep the default of 16. + config EROFS_FS_ZIP_DEFLATE bool "EROFS DEFLATE compressed data support" depends on EROFS_FS_ZIP diff --git a/fs/erofs/decompressor_lzma.c b/fs/erofs/decompressor_lzma.c index f6692d0f2f04..6b0cdb446c6a 100644 --- a/fs/erofs/decompressor_lzma.c +++ b/fs/erofs/decompressor_lzma.c @@ -51,7 +51,8 @@ static int __init z_erofs_lzma_init(void) /* by default, use # of possible CPUs instead */ if (!z_erofs_lzma_nstrms) - z_erofs_lzma_nstrms = num_possible_cpus(); + z_erofs_lzma_nstrms = min_t(unsigned int, num_possible_cpus(), + CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS); for (i = 0; i < z_erofs_lzma_nstrms; ++i) { struct z_erofs_lzma *strm = kzalloc_obj(*strm); -- cgit v1.2.3 From 9972befc3e34ff8b6847198c84f11bfc312dde40 Mon Sep 17 00:00:00 2001 From: Jaehoon Kim Date: Fri, 24 Jul 2026 08:39:43 -0500 Subject: KVM: s390: Fall back to short-term pinning in MAP ioctl FOLL_LONGTERM pinning fails for some memory types, such as file-backed guest memory. As a result, kvm_s390_adapter_map() returns -EINVAL and irqfd adapter registration fails even though interrupt delivery could still work via the existing non-atomic path. When FOLL_LONGTERM pinning fails, verify that the page is accessible using a short-term pin instead. If the short-term pin succeeds, unpin the page and add a map entry with pinned=false to preserve MAP/UNMAP symmetry. The non-atomic irqfd path already performs short-term pinning for interrupt delivery, so this restores the previous behavior for memory that cannot be pinned long-term. get_map_info() is updated to return NULL for unpinned entries so that the atomic irqfd fast path falls back to the non-atomic path. kvm_s390_adapter_unmap() and kvm_s390_unmap_all_adapters() skip dirty marking and unpin for unpinned entries. Update Documentation/virt/kvm/devices/s390_flic.rst to reflect the new MAP/UNMAP behavior. Fixes: c9a568838086 ("KVM: s390: Add map/unmap ioctl and clean mappings post-guest") Signed-off-by: Jaehoon Kim Reviewed-by: Douglas Freimuth Reviewed-by: Matthew Rosato Signed-off-by: Christian Borntraeger --- Documentation/virt/kvm/devices/s390_flic.rst | 15 +++++++- arch/s390/include/asm/kvm_host.h | 5 +++ arch/s390/kvm/interrupt.c | 56 +++++++++++++++++++++------- 3 files changed, 60 insertions(+), 16 deletions(-) diff --git a/Documentation/virt/kvm/devices/s390_flic.rst b/Documentation/virt/kvm/devices/s390_flic.rst index b784f8016748..983c858b444a 100644 --- a/Documentation/virt/kvm/devices/s390_flic.rst +++ b/Documentation/virt/kvm/devices/s390_flic.rst @@ -112,9 +112,20 @@ Groups: mask or unmask the adapter, as specified in mask KVM_S390_IO_ADAPTER_MAP - This is now a no-op. The mapping is purely done by the irq route. + Map an adapter indicator or summary page for long-term pinning so that + interrupt injection can be performed in atomic context. If long-term + pinning is not possible (e.g. file-backed memory), the page is verified + via a short-term pin and the ioctl returns success; interrupt injection + will use the non-atomic irqfd path with short-term pinning on each + interrupt. In Secure Execution mode this is a no-op and the ioctl + returns success. + KVM_S390_IO_ADAPTER_UNMAP - This is now a no-op. The mapping is purely done by the irq route. + Unmap a previously mapped adapter indicator or summary page and release + the long-term pin. If the page was not long-term pinned (e.g. file-backed + memory), the map entry is removed and success is returned; if no prior + map entry exists, -ENOENT is returned. In Secure Execution mode this is + a no-op and the ioctl returns success. KVM_DEV_FLIC_AISM modify the adapter-interruption-suppression mode for a given isc if the diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index eaa34c5bd3c1..c172f9b212d1 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -476,6 +476,11 @@ struct s390_map_info { __u64 guest_addr; __u64 addr; struct page *page; + /* + * True if the page is long-term pinned. False if long-term pinning + * failed and this entry exists only to preserve MAP/UNMAP symmetry. + */ + bool pinned; }; struct s390_io_adapter { diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 9e3e6b0d72ad..7514d9e2403c 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -2520,8 +2520,22 @@ static int kvm_s390_adapter_map(struct kvm *kvm, unsigned int id, __u64 addr) map->addr = host_addr; map->page = pin_map_page(kvm, host_addr, FOLL_LONGTERM); if (!map->page) { - ret = -EINVAL; - goto out; + /* + * Long-term pinning may fail for memory types such as file-backed + * memory. Verify that short-term pinning succeeds so that the + * non-atomic irqfd path can handle interrupt injection. + */ + map->page = pin_map_page(kvm, host_addr, 0); + if (!map->page) { + ret = -EINVAL; + goto out; + } + unpin_user_page(map->page); + map->page = NULL; + map->pinned = false; + /* Add an entry to preserve MAP/UNMAP symmetry. */ + } else { + map->pinned = true; } spin_lock_irqsave(&adapter->maps_lock, flags); if (adapter->nr_maps < MAX_S390_ADAPTER_MAPS) { @@ -2532,7 +2546,7 @@ static int kvm_s390_adapter_map(struct kvm *kvm, unsigned int id, __u64 addr) ret = -EINVAL; } spin_unlock_irqrestore(&adapter->maps_lock, flags); - if (ret) + if (ret && map->page) unpin_user_page(map->page); out: if (ret) @@ -2546,6 +2560,7 @@ static int kvm_s390_adapter_unmap(struct kvm *kvm, unsigned int id, __u64 addr) struct s390_map_info *map, *tmp, *map_to_free; struct page *map_page_to_put = NULL; u64 map_addr_to_mark = 0; + bool map_pinned = false; unsigned long flags; int found = 0, idx; @@ -2560,6 +2575,7 @@ static int kvm_s390_adapter_unmap(struct kvm *kvm, unsigned int id, __u64 addr) list_del(&map->list); map_page_to_put = map->page; map_addr_to_mark = map->guest_addr; + map_pinned = map->pinned; map_to_free = map; break; } @@ -2568,11 +2584,18 @@ static int kvm_s390_adapter_unmap(struct kvm *kvm, unsigned int id, __u64 addr) if (found) { kfree(map_to_free); - idx = srcu_read_lock(&kvm->srcu); - mark_page_dirty(kvm, map_addr_to_mark >> PAGE_SHIFT); - set_page_dirty_lock(map_page_to_put); - srcu_read_unlock(&kvm->srcu, idx); - unpin_user_page(map_page_to_put); + if (map_pinned) { + /* + * Only long-term pinned pages need to be marked dirty + * and released. Fallback entries exist only for + * MAP/UNMAP symmetry. + */ + idx = srcu_read_lock(&kvm->srcu); + mark_page_dirty(kvm, map_addr_to_mark >> PAGE_SHIFT); + set_page_dirty_lock(map_page_to_put); + srcu_read_unlock(&kvm->srcu, idx); + unpin_user_page(map_page_to_put); + } } return found ? 0 : -ENOENT; @@ -2598,11 +2621,13 @@ void kvm_s390_unmap_all_adapters(struct kvm *kvm) list_for_each_entry_safe(map, tmp, &local_list, list) { list_del(&map->list); - idx = srcu_read_lock(&kvm->srcu); - mark_page_dirty(kvm, map->guest_addr >> PAGE_SHIFT); - set_page_dirty_lock(map->page); - srcu_read_unlock(&kvm->srcu, idx); - unpin_user_page(map->page); + if (map->pinned) { + idx = srcu_read_lock(&kvm->srcu); + mark_page_dirty(kvm, map->guest_addr >> PAGE_SHIFT); + set_page_dirty_lock(map->page); + srcu_read_unlock(&kvm->srcu, idx); + unpin_user_page(map->page); + } kfree(map); } } @@ -2929,8 +2954,11 @@ static struct s390_map_info *get_map_info(struct s390_io_adapter *adapter, return NULL; list_for_each_entry(map, &adapter->maps, list) { - if (map->addr == addr) + if (map->addr == addr) { + if (!map->pinned) + return NULL; return map; + } } return NULL; } -- cgit v1.2.3 From 67ff4bf723c8bd1f1b10450fa3e8f55762418104 Mon Sep 17 00:00:00 2001 From: Alex Tran Date: Fri, 24 Jul 2026 09:42:28 -0700 Subject: gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper After successfully configuring gpio pin as output, set the requested initial output value via the existing gpio set wrapper, so that the pin is not left at its previous level. Fixes: 7671f4949a6c ("gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver") Signed-off-by: Alex Tran Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260724-gpio-pinctrl-output-set-val-v2-1-cad55d025636@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-by-pinctrl.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpio-by-pinctrl.c b/drivers/gpio/gpio-by-pinctrl.c index 7d7c48ce5163..fb8440acb31d 100644 --- a/drivers/gpio/gpio-by-pinctrl.c +++ b/drivers/gpio/gpio-by-pinctrl.c @@ -27,12 +27,6 @@ static int pin_control_gpio_get_direction(struct gpio_chip *gc, unsigned int off return GPIO_LINE_DIRECTION_IN; } -static int pin_control_gpio_direction_output(struct gpio_chip *chip, - unsigned int offset, int val) -{ - return pinctrl_gpio_direction_output(chip, offset); -} - static int pin_control_gpio_get(struct gpio_chip *chip, unsigned int offset) { unsigned long config; @@ -55,6 +49,18 @@ static int pin_control_gpio_set(struct gpio_chip *chip, unsigned int offset, return pinctrl_gpio_set_config(chip, offset, config); } +static int pin_control_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int val) +{ + int ret; + + ret = pinctrl_gpio_direction_output(chip, offset); + if (ret) + return ret; + + return pin_control_gpio_set(chip, offset, val); +} + static int pin_control_gpio_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; -- cgit v1.2.3 From 6a39ca1286dd97ad02bb8e03bbb65ee05368d778 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 17 Jul 2026 21:48:36 +0300 Subject: drm/bridge: display-connector: Fix I2C adapter resource leak If the probe function returns an error after getting the I2C adapter for DDC, the reference to the adapter is never released. Fix it by releasing it in the bridge .destroy() handler. There is no need to test the ddc pointer with !IS_ERR(), as of_get_i2c_adapter_by_node() returns NULL on error. Fixes: 2e2bf3a5584d ("drm/bridge: display-connector: add DP support") Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart Reviewed-by: Johan Hovold Reviewed-by: Luca Ceresoli Link: https://patch.msgid.link/20260717184836.2017386-1-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Luca Ceresoli --- drivers/gpu/drm/bridge/display-connector.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/bridge/display-connector.c b/drivers/gpu/drm/bridge/display-connector.c index 16c0631adeb1..6b128fabe3a9 100644 --- a/drivers/gpu/drm/bridge/display-connector.c +++ b/drivers/gpu/drm/bridge/display-connector.c @@ -40,6 +40,13 @@ static int display_connector_attach(struct drm_bridge *bridge, return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL; } +static void display_connector_destroy(struct drm_bridge *bridge) +{ + struct display_connector *conn = to_display_connector(bridge); + + i2c_put_adapter(conn->bridge.ddc); +} + static enum drm_connector_status display_connector_detect(struct drm_bridge *bridge) { struct display_connector *conn = to_display_connector(bridge); @@ -177,6 +184,7 @@ static u32 *display_connector_get_input_bus_fmts(struct drm_bridge *bridge, static const struct drm_bridge_funcs display_connector_bridge_funcs = { .attach = display_connector_attach, + .destroy = display_connector_destroy, .detect = display_connector_bridge_detect, .edid_read = display_connector_edid_read, .atomic_get_output_bus_fmts = display_connector_get_output_bus_fmts, @@ -403,9 +411,6 @@ static void display_connector_remove(struct platform_device *pdev) regulator_disable(conn->supply); drm_bridge_remove(&conn->bridge); - - if (!IS_ERR(conn->bridge.ddc)) - i2c_put_adapter(conn->bridge.ddc); } static const struct of_device_id display_connector_match[] = { -- cgit v1.2.3 From d233087c19f6607ef926ac3f47d776e2406ffd1f Mon Sep 17 00:00:00 2001 From: bui duc phuc Date: Mon, 27 Jul 2026 15:02:05 +0700 Subject: gpio: pca953x: fix cache_only and IRQ state on restore_context() failure When pca953x_restore_context() fails, cache_only is left disabled and the IRQ left enabled, even though register synchronization may not have completed successfully. Restore cache_only and disable the IRQ again on failure, matching the state set by pca953x_save_context(). Fixes: ec5bde62019b ("gpio: pca953x: Split pca953x_restore_context() and pca953x_save_context()") Fixes: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up") Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij Signed-off-by: bui duc phuc Link: https://patch.msgid.link/20260727080205.16353-1-phucduc.bui@gmail.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pca953x.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index e03bf1b12091..aac9ea7520b6 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -1378,9 +1378,20 @@ static int pca953x_restore_context(struct pca953x_chip *chip) regcache_mark_dirty(chip->regmap); ret = pca953x_regcache_sync(chip); if (ret) - return ret; + goto err; + + ret = regcache_sync(chip->regmap); + if (ret) + goto err; + + return 0; - return regcache_sync(chip->regmap); +err: + if (chip->client->irq > 0) + disable_irq(chip->client->irq); + regcache_cache_only(chip->regmap, true); + + return ret; } static void pca953x_save_context(struct pca953x_chip *chip) -- cgit v1.2.3 From a02b8950d619123da64f69b70fe1dadef217dfe4 Mon Sep 17 00:00:00 2001 From: Junjie Cao Date: Thu, 23 Jul 2026 09:41:29 +0800 Subject: gpio: pch: use raw_spinlock_t for the register lock pch_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. This was confirmed on a PREEMPT_RT kernel with lockdep (PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored pch_irq_type()'s locking and drove it through the real genirq carrier irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e. the same __irq_set_trigger() edge that __setup_irq() takes for a requested IRQ. With the original spin_lock_irqsave() edge lockdep reported an invalid wait context, immediately followed by: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60 rt_spin_lock+0x3a/0x1c0 repro_irq_set_type+0x64/0xa0 [pch_repro] __irq_set_trigger+0x69/0x140 irq_set_irq_type+0x78/0xd0 Switching the mirrored lock to raw_spinlock_t made both splats go away. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, but all of those critical sections only perform MMIO register accesses (ioread32()/iowrite32()) and irq_set_handler_locked(); none of them contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same class of issue and fix as recently addressed for other GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use raw_spinlock_t in the irq startup path"). Fixes: 38eb18a6f92d ("gpio-pch: Support interrupt function") Cc: stable@vger.kernel.org Signed-off-by: Junjie Cao Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260723014129.1129730-1-junjie.cao@intel.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pch.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c index 4ffa0955a9e3..07a5617b314b 100644 --- a/drivers/gpio/gpio-pch.c +++ b/drivers/gpio/gpio-pch.c @@ -96,7 +96,7 @@ struct pch_gpio { struct pch_gpio_reg_data pch_gpio_reg; int irq_base; enum pch_type_t ioh; - spinlock_t spinlock; + raw_spinlock_t spinlock; }; static int pch_gpio_set(struct gpio_chip *gpio, unsigned int nr, int val) @@ -105,7 +105,7 @@ static int pch_gpio_set(struct gpio_chip *gpio, unsigned int nr, int val) struct pch_gpio *chip = gpiochip_get_data(gpio); unsigned long flags; - spin_lock_irqsave(&chip->spinlock, flags); + raw_spin_lock_irqsave(&chip->spinlock, flags); reg_val = ioread32(&chip->reg->po); if (val) reg_val |= BIT(nr); @@ -113,7 +113,7 @@ static int pch_gpio_set(struct gpio_chip *gpio, unsigned int nr, int val) reg_val &= ~BIT(nr); iowrite32(reg_val, &chip->reg->po); - spin_unlock_irqrestore(&chip->spinlock, flags); + raw_spin_unlock_irqrestore(&chip->spinlock, flags); return 0; } @@ -133,7 +133,7 @@ static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned int nr, u32 reg_val; unsigned long flags; - spin_lock_irqsave(&chip->spinlock, flags); + raw_spin_lock_irqsave(&chip->spinlock, flags); reg_val = ioread32(&chip->reg->po); if (val) @@ -147,7 +147,7 @@ static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned int nr, pm |= BIT(nr); iowrite32(pm, &chip->reg->pm); - spin_unlock_irqrestore(&chip->spinlock, flags); + raw_spin_unlock_irqrestore(&chip->spinlock, flags); return 0; } @@ -158,12 +158,12 @@ static int pch_gpio_direction_input(struct gpio_chip *gpio, unsigned int nr) u32 pm; unsigned long flags; - spin_lock_irqsave(&chip->spinlock, flags); + raw_spin_lock_irqsave(&chip->spinlock, flags); pm = ioread32(&chip->reg->pm); pm &= BIT(gpio_pins[chip->ioh]) - 1; pm &= ~BIT(nr); iowrite32(pm, &chip->reg->pm); - spin_unlock_irqrestore(&chip->spinlock, flags); + raw_spin_unlock_irqrestore(&chip->spinlock, flags); return 0; } @@ -265,7 +265,7 @@ static int pch_irq_type(struct irq_data *d, unsigned int type) return 0; } - spin_lock_irqsave(&chip->spinlock, flags); + raw_spin_lock_irqsave(&chip->spinlock, flags); /* Set interrupt mode */ im = ioread32(im_reg) & ~(PCH_IM_MASK << (im_pos * 4)); @@ -277,7 +277,7 @@ static int pch_irq_type(struct irq_data *d, unsigned int type) else if (type & IRQ_TYPE_EDGE_BOTH) irq_set_handler_locked(d, handle_edge_irq); - spin_unlock_irqrestore(&chip->spinlock, flags); + raw_spin_unlock_irqrestore(&chip->spinlock, flags); return 0; } @@ -374,7 +374,7 @@ static int pch_gpio_probe(struct pci_dev *pdev, chip->ioh = id->driver_data; chip->reg = chip->base; pci_set_drvdata(pdev, chip); - spin_lock_init(&chip->spinlock); + raw_spin_lock_init(&chip->spinlock); pch_gpio_setup(chip); ret = devm_gpiochip_add_data(dev, &chip->gpio, chip); @@ -407,9 +407,9 @@ static int pch_gpio_suspend(struct device *dev) struct pch_gpio *chip = dev_get_drvdata(dev); unsigned long flags; - spin_lock_irqsave(&chip->spinlock, flags); + raw_spin_lock_irqsave(&chip->spinlock, flags); pch_gpio_save_reg_conf(chip); - spin_unlock_irqrestore(&chip->spinlock, flags); + raw_spin_unlock_irqrestore(&chip->spinlock, flags); return 0; } @@ -419,11 +419,11 @@ static int pch_gpio_resume(struct device *dev) struct pch_gpio *chip = dev_get_drvdata(dev); unsigned long flags; - spin_lock_irqsave(&chip->spinlock, flags); + raw_spin_lock_irqsave(&chip->spinlock, flags); iowrite32(0x01, &chip->reg->reset); iowrite32(0x00, &chip->reg->reset); pch_gpio_restore_reg_conf(chip); - spin_unlock_irqrestore(&chip->spinlock, flags); + raw_spin_unlock_irqrestore(&chip->spinlock, flags); return 0; } -- cgit v1.2.3 From 47d4e945dff8139050473be4ab263a32e1da910c Mon Sep 17 00:00:00 2001 From: Christian Loehle Date: Fri, 24 Jul 2026 11:40:42 +0100 Subject: ACPI: CPPC: Skip writes to unsupported performance controls MIN_PERF and MAX_PERF are optional CPPC controls. DESIRED_PERF is also optional with CPPC2 when autonomous selection is supported. The cppc-cpufreq target callbacks populate both limits for every request without checking whether the controls are implemented. cppc_set_perf() consequently passes NULL register descriptors to cpc_write(). The writes fail width validation and their return values are ignored, so the failed access paths are repeated on every target request. An autonomous-only platform can take the same path for DESIRED_PERF. Check that each performance control is supported before calling cpc_write(). Fixes: ea3db45ae476 ("cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks") Reviewed-by: Sumit Gupta Signed-off-by: Christian Loehle Reviewed-by: Lifeng Zheng Link: https://patch.msgid.link/20260724104042.1481804-1-christian.loehle@arm.com Signed-off-by: Rafael J. Wysocki --- drivers/acpi/cppc_acpi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index 1d3a94100491..53d09ca98f06 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -1963,16 +1963,17 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) cpc_desc->write_cmd_status = 0; } - cpc_write(cpu, desired_reg, perf_ctrls->desired_perf); + if (CPC_SUPPORTED(desired_reg)) + cpc_write(cpu, desired_reg, perf_ctrls->desired_perf); /* * Only write if min_perf and max_perf not zero. Some drivers pass zero * value to min and max perf, but they don't mean to set the zero value, * they just don't want to write to those registers. */ - if (perf_ctrls->min_perf) + if (perf_ctrls->min_perf && CPC_SUPPORTED(min_perf_reg)) cpc_write(cpu, min_perf_reg, perf_ctrls->min_perf); - if (perf_ctrls->max_perf) + if (perf_ctrls->max_perf && CPC_SUPPORTED(max_perf_reg)) cpc_write(cpu, max_perf_reg, perf_ctrls->max_perf); if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) -- cgit v1.2.3 From 27460bd80bbab542f7f2ddf687923a73984757eb Mon Sep 17 00:00:00 2001 From: Jackie Dong Date: Mon, 27 Jul 2026 16:00:48 +0800 Subject: ALSA:hda/realtek:ALC269 fixup for Legion 7 15ASH11 Mic Mute LED Lenovo Legion 7 15ASH11 with AMD RYZEN AI MAX+ 392 (Strix Halo, ACP 7.0) uses Realtek ALC287 series codec. Its audio subsystem adopts a hardware design similar to that of the Yoga Pro 7 15ASH11. It shares PCI SSID 17aa:38f9 with Thinkbook 16P Gen5. Therefore, use HDA_CODEC_QUIRK to apply ALC287_FIXUP_LENOVO_YOGA_PRO7 for identification. After added the HDA_CODEC_QUIRK quirk special for Lenovo Legion 7 15ASH11, the mic mute LED works well. Signed-off-by: Jackie Dong Link: https://patch.msgid.link/20260727080048.13254-1-xy-jackie@139.com Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index 09225801a177..5a516dee56ff 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -7973,6 +7973,10 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x38e0, "Yoga Y990 Intel VECO Dual", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x38f8, "Yoga Book 9i", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x38df, "Y990 YG DUAL", ALC287_FIXUP_TAS2781_I2C), + /* Legion 7 15ASH11 shares PCI SSID 17aa:38f9 with Thinkbook 16P Gen5; + * use codec SSID to distinguish them + */ + HDA_CODEC_QUIRK(0x17aa, 0x395b, "Lenovo Legion 7 15ASH11", ALC287_FIXUP_LENOVO_YOGA_PRO7), SND_PCI_QUIRK(0x17aa, 0x38f9, "Thinkbook 16P Gen5", ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x38fa, "Thinkbook 16P Gen5", ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x38fc, "Lenovo Yoga Pro 7 15ASH11", ALC287_FIXUP_LENOVO_YOGA_PRO7), -- cgit v1.2.3 From bed0c8084044364f5ac3f3e89e1bbad423f6b0d4 Mon Sep 17 00:00:00 2001 From: Michael Diesen Date: Mon, 27 Jul 2026 09:19:21 +0000 Subject: ALSA: hda/realtek: Add quirk for HP Dragonfly Folio G3 2-in-1 (103c:8a05) The HP Dragonfly Folio G3 2-in-1 also ships with PCI SSID 103c:8a05. On this unit the ALC245 codec reports subsystem id 103c:8a06 - the SSID that is already covered by commit 0a10faad5ca5 ("ALSA: hda/realtek: add quirk for HP Dragonfly Folio G3 2-in-1") - while the PCI SSID that SND_PCI_QUIRK matches against is 103c:8a05: snd_hda_codec_alc269 ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:8a05 cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: CS35L41 Bound - SSID: 103C8A06 The existing entry therefore never applies here, the four CS35L41 amplifiers on SPI are not registered and the internal speakers stay silent. Add the same fixup that the 8a06 entry uses: the four amplifiers bind and the speaker mute LED (codec GPIO 0x04) works. Signed-off-by: Michael Diesen Link: https://patch.msgid.link/20260727091920.4634-1-michael.diesen@posteo.de Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index 5a516dee56ff..f620cd429f20 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -7255,6 +7255,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x89d3, "HP EliteBook 645 G9 (MB 89D2)", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x89da, "HP Spectre x360 14t-ea100", ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX), SND_PCI_QUIRK(0x103c, 0x89e7, "HP Elite x2 G9", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8a05, "HP Dragonfly Folio G3 2-in-1", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8a06, "HP Dragonfly Folio G3 2-in-1", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8a0f, "HP Pavilion 14-ec1xxx", ALC287_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8a1b, "HP 255 15.6 inch G9 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), -- cgit v1.2.3 From d5f8e5f6040d052d44fcbf4f31dd35145c0c8d7d Mon Sep 17 00:00:00 2001 From: Abdun Nihaal Date: Mon, 27 Jul 2026 15:05:51 +0530 Subject: cpufreq: powernow-k8: Fix possible memory leak in powernowk8_cpu_init() The memory allocated for data->powernow_table inside powernow_k8_cpu_init_acpi() or find_psb_table() is not freed in one of the error paths in powernowk8_cpu_init(). Fix that by adding a kfree(). Fixes: 1ff6e97f1d99 ("[CPUFREQ] cpumask: avoid playing with cpus_allowed in powernow-k8.c") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Acked-by: Viresh Kumar Reviewed-by: Zhongqiu Han Link: https://patch.msgid.link/20260727093553.98246-1-nihaal@cse.iitm.ac.in Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/powernow-k8.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index 2b791f1ec51b..909a3f0598a9 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -1084,6 +1084,7 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol) err_out_exit_acpi: powernow_k8_cpu_exit_acpi(data); + kfree(data->powernow_table); err_out: kfree(data); -- cgit v1.2.3 From 47abd2ca281531deee38a3b3770d885e270e9fc9 Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Mon, 20 Jul 2026 14:43:22 +0800 Subject: wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup() ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is wrong: dp_peer->peer_id for an MLO peer always carries the ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS (256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The intended bitmap entry also never gets cleared, so subsequent ath12k_peer_ml_alloc() calls eventually run out of IDs. The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and is stored in ahsta->ml_peer_id. Use that instead. While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so the bitmap and ahsta->ml_peer_id stay in sync. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Fixes: ee16dcf573d5 ("wifi: ath12k: Define ath12k_dp_peer structure & APIs for create & delete") Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-1-630632758a80@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath12k/mac.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index 51c4df32e716..aa82c8fccc4e 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -1287,8 +1287,11 @@ void ath12k_mac_dp_peer_cleanup(struct ath12k_hw *ah) spin_lock_bh(&dp_hw->peer_lock); list_for_each_entry_safe(dp_peer, tmp, &dp_hw->dp_peers_list, list) { if (dp_peer->is_mlo) { + struct ath12k_sta *ahsta = ath12k_sta_to_ahsta(dp_peer->sta); + rcu_assign_pointer(dp_hw->dp_peers[dp_peer->peer_id], NULL); - clear_bit(dp_peer->peer_id, ah->free_ml_peer_id_map); + clear_bit(ahsta->ml_peer_id, ah->free_ml_peer_id_map); + ahsta->ml_peer_id = ATH12K_MLO_PEER_ID_INVALID; } list_move(&dp_peer->list, &peers); -- cgit v1.2.3 From 21ca38bb6b53a0b610998f370a91e656dc9e0542 Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Mon, 20 Jul 2026 14:43:23 +0800 Subject: wifi: ath12k: factor out peer assoc send-and-wait into a helper ath12k_bss_assoc(), ath12k_mac_station_assoc() and ath12k_sta_rc_update_wk() all open-code the same sequence: reinit the peer_assoc_done completion, send the peer assoc WMI command, then wait for the firmware confirmation event. The reinit_completion() was buried in ath12k_peer_assoc_prepare(), far from the wait_for_completion_timeout() that consumes it, making the reinit/send/wait sequence hard to follow, and the three open-coded copies are easy to get out of sync. Move the sequence into a new helper ath12k_mac_peer_assoc() and call it from all three sites. The reinit, send and wait now live together so the completion's lifecycle is easy to read. While at it, ath12k_sta_rc_update_wk() previously warned but still waited the full timeout when the peer assoc command failed to send. Now a send failure returns immediately and skips the pointless 1 second wait, matching the other two callers. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-2-630632758a80@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath12k/mac.c | 59 +++++++++++++++++------------------ 1 file changed, 29 insertions(+), 30 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index aa82c8fccc4e..b4df222f0c19 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -3598,8 +3598,6 @@ static void ath12k_peer_assoc_prepare(struct ath12k *ar, memset(arg, 0, sizeof(*arg)); - reinit_completion(&ar->peer_assoc_done); - arg->peer_new_assoc = !reassoc; ath12k_peer_assoc_h_basic(ar, arvif, arsta, arg); ath12k_peer_assoc_h_crypto(ar, arvif, arsta, arg); @@ -3839,6 +3837,29 @@ static u32 ath12k_mac_ieee80211_sta_bw_to_wmi(struct ath12k *ar, return bw; } +static int ath12k_mac_peer_assoc(struct ath12k *ar, + struct ath12k_wmi_peer_assoc_arg *peer_arg) +{ + int ret; + + reinit_completion(&ar->peer_assoc_done); + + ret = ath12k_wmi_send_peer_assoc_cmd(ar, peer_arg); + if (ret) { + ath12k_warn(ar->ab, "failed to run peer assoc for %pM vdev %i: %d\n", + peer_arg->peer_mac, peer_arg->vdev_id, ret); + return ret; + } + + if (!wait_for_completion_timeout(&ar->peer_assoc_done, 1 * HZ)) { + ath12k_warn(ar->ab, "failed to get peer assoc conf event for %pM vdev %i\n", + peer_arg->peer_mac, peer_arg->vdev_id); + return -ETIMEDOUT; + } + + return 0; +} + static void ath12k_bss_assoc(struct ath12k *ar, struct ath12k_link_vif *arvif, struct ieee80211_bss_conf *bss_conf) @@ -3919,18 +3940,10 @@ static void ath12k_bss_assoc(struct ath12k *ar, } peer_arg->is_assoc = true; - ret = ath12k_wmi_send_peer_assoc_cmd(ar, peer_arg); - if (ret) { - ath12k_warn(ar->ab, "failed to run peer assoc for %pM vdev %i: %d\n", - bss_conf->bssid, arvif->vdev_id, ret); - return; - } - if (!wait_for_completion_timeout(&ar->peer_assoc_done, 1 * HZ)) { - ath12k_warn(ar->ab, "failed to get peer assoc conf event for %pM vdev %i\n", - bss_conf->bssid, arvif->vdev_id); + ret = ath12k_mac_peer_assoc(ar, peer_arg); + if (ret) return; - } ret = ath12k_setup_peer_smps(ar, arvif, bss_conf->bssid, &link_sta->ht_cap, &link_sta->he_6ghz_capa); @@ -6484,18 +6497,10 @@ static int ath12k_mac_station_assoc(struct ath12k *ar, } peer_arg->is_assoc = true; - ret = ath12k_wmi_send_peer_assoc_cmd(ar, peer_arg); - if (ret) { - ath12k_warn(ar->ab, "failed to run peer assoc for STA %pM vdev %i: %d\n", - arsta->addr, arvif->vdev_id, ret); - return ret; - } - if (!wait_for_completion_timeout(&ar->peer_assoc_done, 1 * HZ)) { - ath12k_warn(ar->ab, "failed to get peer assoc conf event for %pM vdev %i\n", - arsta->addr, arvif->vdev_id); - return -ETIMEDOUT; - } + ret = ath12k_mac_peer_assoc(ar, peer_arg); + if (ret) + return ret; num_vht_rates = ath12k_mac_bitrate_mask_num_vht_rates(ar, band, mask); num_he_rates = ath12k_mac_bitrate_mask_num_he_rates(ar, band, mask); @@ -6844,14 +6849,8 @@ static void ath12k_sta_rc_update_wk(struct wiphy *wiphy, struct wiphy_work *wk) peer_arg, true); peer_arg->is_assoc = false; - err = ath12k_wmi_send_peer_assoc_cmd(ar, peer_arg); - if (err) - ath12k_warn(ar->ab, "failed to run peer assoc for STA %pM vdev %i: %d\n", - arsta->addr, arvif->vdev_id, err); - if (!wait_for_completion_timeout(&ar->peer_assoc_done, 1 * HZ)) - ath12k_warn(ar->ab, "failed to get peer assoc conf event for %pM vdev %i\n", - arsta->addr, arvif->vdev_id); + ath12k_mac_peer_assoc(ar, peer_arg); } } } -- cgit v1.2.3 From dd121ed779dd62c7679815f7c5a0b07da60a39bf Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Mon, 20 Jul 2026 14:43:24 +0800 Subject: wifi: ath12k: keep ATH12K_PEER_ML_ID_VALID set in ath12k_sta::ml_peer_id Several pieces of host bookkeeping for MLD peer IDs encode the same fact in different ways: - ath12k_sta::ml_peer_id stores the raw ID in [0, ATH12K_MAX_MLO_PEERS); - ath12k_dp_peer::peer_id, ath12k_dp_link_peer::ml_id and the index used on ath12k_dp_hw::dp_peers[] always carry the ATH12K_PEER_ML_ID_VALID bit (BIT(13)) when the ID is real; - WMI_MLO_PEER_ASSOC_PARAMS::ml_peer_id sent down to firmware is raw, without the bookkeeping bit. The mismatch leaks into call sites that have to remember to OR the bit in (ath12k_peer_create(), ath12k_mac_op_sta_state()) or remember not to (ath12k_peer_assoc_h_mlo()). Make ath12k_sta::ml_peer_id carry the VALID bit when valid, the same way ath12k_dp_peer::peer_id and ath12k_dp_link_peer::ml_id do: - ath12k_peer_ml_alloc() OR-s the bit in once on the way out; the internal bitmap stays raw [0, ATH12K_MAX_MLO_PEERS); - ath12k_peer_create() and ath12k_mac_op_sta_state() drop the explicit OR; - ath12k_peer_assoc_h_mlo() masks the bit off when populating the WMI ml_peer_id; While there, introduce ath12k_peer_ml_free() to mirror ath12k_peer_ml_alloc(), which helps avoid code duplication. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-3-630632758a80@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath12k/mac.c | 27 +++++++++++++-------------- drivers/net/wireless/ath/ath12k/peer.c | 17 ++++++++++++++--- drivers/net/wireless/ath/ath12k/peer.h | 1 + 3 files changed, 28 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index b4df222f0c19..06f1a1ba994a 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -1282,16 +1282,15 @@ void ath12k_mac_dp_peer_cleanup(struct ath12k_hw *ah) struct ath12k_dp_peer *dp_peer, *tmp; struct ath12k_dp_hw *dp_hw = &ah->dp_hw; + lockdep_assert_wiphy(ah->hw->wiphy); + INIT_LIST_HEAD(&peers); spin_lock_bh(&dp_hw->peer_lock); list_for_each_entry_safe(dp_peer, tmp, &dp_hw->dp_peers_list, list) { if (dp_peer->is_mlo) { - struct ath12k_sta *ahsta = ath12k_sta_to_ahsta(dp_peer->sta); - rcu_assign_pointer(dp_hw->dp_peers[dp_peer->peer_id], NULL); - clear_bit(ahsta->ml_peer_id, ah->free_ml_peer_id_map); - ahsta->ml_peer_id = ATH12K_MLO_PEER_ID_INVALID; + ath12k_peer_ml_free(ah, ath12k_sta_to_ahsta(dp_peer->sta)); } list_move(&dp_peer->list, &peers); @@ -3551,7 +3550,11 @@ static void ath12k_peer_assoc_h_mlo(struct ath12k_link_sta *arsta, ether_addr_copy(ml->mld_addr, sta->addr); ml->logical_link_idx = arsta->link_idx; - ml->ml_peer_id = ahsta->ml_peer_id; + /* + * WMI_MLO_PEER_ASSOC_PARAMS expects the raw ML peer ID without + * the host-side ATH12K_PEER_ML_ID_VALID bookkeeping bit. + */ + ml->ml_peer_id = ahsta->ml_peer_id & ~ATH12K_PEER_ML_ID_VALID; ml->ieee_link_id = arsta->link_id; ml->num_partner_links = 0; ml->eml_cap = sta->eml_cap; @@ -7268,10 +7271,8 @@ static void ath12k_mac_ml_station_remove(struct ath12k_vif *ahvif, ath12k_mac_free_unassign_link_sta(ah, ahsta, link_id); } - if (sta->mlo) { - clear_bit(ahsta->ml_peer_id, ah->free_ml_peer_id_map); - ahsta->ml_peer_id = ATH12K_MLO_PEER_ID_INVALID; - } + if (sta->mlo) + ath12k_peer_ml_free(ah, ahsta); } static int ath12k_mac_handle_link_sta_state(struct ieee80211_hw *hw, @@ -7743,7 +7744,7 @@ int ath12k_mac_op_sta_state(struct ieee80211_hw *hw, } dp_params.is_mlo = true; - dp_params.peer_id = ahsta->ml_peer_id | ATH12K_PEER_ML_ID_VALID; + dp_params.peer_id = ahsta->ml_peer_id; } dp_params.sta = sta; @@ -7880,10 +7881,8 @@ int ath12k_mac_op_sta_state(struct ieee80211_hw *hw, peer_delete: ath12k_dp_peer_delete(&ah->dp_hw, sta->addr, sta); ml_peer_id_clear: - if (sta->mlo) { - clear_bit(ahsta->ml_peer_id, ah->free_ml_peer_id_map); - ahsta->ml_peer_id = ATH12K_MLO_PEER_ID_INVALID; - } + if (sta->mlo) + ath12k_peer_ml_free(ah, ahsta); exit: /* update the state if everything went well */ if (!ret) diff --git a/drivers/net/wireless/ath/ath12k/peer.c b/drivers/net/wireless/ath/ath12k/peer.c index 2681a047d4d5..5dd7c6470219 100644 --- a/drivers/net/wireless/ath/ath12k/peer.c +++ b/drivers/net/wireless/ath/ath12k/peer.c @@ -230,7 +230,7 @@ int ath12k_peer_create(struct ath12k *ar, struct ath12k_link_vif *arvif, /* Fill ML info into created peer */ if (sta->mlo) { ml_peer_id = ahsta->ml_peer_id; - peer->ml_id = ml_peer_id | ATH12K_PEER_ML_ID_VALID; + peer->ml_id = ml_peer_id; ether_addr_copy(peer->ml_addr, sta->addr); /* the assoc link is considered primary for now */ @@ -276,9 +276,20 @@ u16 ath12k_peer_ml_alloc(struct ath12k_hw *ah) } if (ml_peer_id == ATH12K_MAX_MLO_PEERS) - ml_peer_id = ATH12K_MLO_PEER_ID_INVALID; + return ATH12K_MLO_PEER_ID_INVALID; - return ml_peer_id; + return ml_peer_id | ATH12K_PEER_ML_ID_VALID; +} + +void ath12k_peer_ml_free(struct ath12k_hw *ah, struct ath12k_sta *ahsta) +{ + lockdep_assert_wiphy(ah->hw->wiphy); + + if (ahsta->ml_peer_id < + (ATH12K_MAX_MLO_PEERS | ATH12K_PEER_ML_ID_VALID)) + clear_bit(ahsta->ml_peer_id & ~ATH12K_PEER_ML_ID_VALID, + ah->free_ml_peer_id_map); + ahsta->ml_peer_id = ATH12K_MLO_PEER_ID_INVALID; } int ath12k_peer_mlo_link_peers_delete(struct ath12k_vif *ahvif, struct ath12k_sta *ahsta) diff --git a/drivers/net/wireless/ath/ath12k/peer.h b/drivers/net/wireless/ath/ath12k/peer.h index 49d89796bc46..0f7f25b8e89c 100644 --- a/drivers/net/wireless/ath/ath12k/peer.h +++ b/drivers/net/wireless/ath/ath12k/peer.h @@ -26,4 +26,5 @@ int ath12k_link_sta_rhash_add(struct ath12k_base *ab, struct ath12k_link_sta *ar struct ath12k_link_sta *ath12k_link_sta_find_by_addr(struct ath12k_base *ab, const u8 *addr); u16 ath12k_peer_ml_alloc(struct ath12k_hw *ah); +void ath12k_peer_ml_free(struct ath12k_hw *ah, struct ath12k_sta *ahsta); #endif /* _PEER_H_ */ -- cgit v1.2.3 From a08455ee85a2b32a5503b84fdc6b88a144cb2388 Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Mon, 20 Jul 2026 14:43:25 +0800 Subject: wifi: ath12k: add support for HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP Firmware on chips that allocate the MLD peer ID itself (WCN7850 and QCC2072) reports the assignment back to the host through HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP. The message carries the chosen MLD peer id, the MLD MAC address etc. Add the message type, the on-the-wire struct, the field masks and a handler that parses them out. The host-side state update (publishing the dp peer into ath12k_dp_hw::dp_peers[], propagating the ID to ath12k_dp_link_peer::ml_id and ath12k_sta::ml_peer_id) is added in a follow-up patch; Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-4-630632758a80@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath12k/dp_htt.c | 30 ++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath12k/dp_htt.h | 12 ++++++++++++ 2 files changed, 42 insertions(+) diff --git a/drivers/net/wireless/ath/ath12k/dp_htt.c b/drivers/net/wireless/ath/ath12k/dp_htt.c index 52e10059c6d5..150b190f9c7f 100644 --- a/drivers/net/wireless/ath/ath12k/dp_htt.c +++ b/drivers/net/wireless/ath/ath12k/dp_htt.c @@ -575,6 +575,33 @@ exit: rcu_read_unlock(); } +static void ath12k_dp_htt_mlo_peer_map_handler(struct ath12k_base *ab, + struct sk_buff *skb) +{ + struct htt_resp_msg *resp = (struct htt_resp_msg *)skb->data; + struct htt_t2h_mlo_peer_map_event *ev = &resp->mlo_peer_map_ev; + u16 raw_peer_id, peer_id, addr_h16; + u8 peer_addr[ETH_ALEN]; + + if (skb->len < sizeof(*ev)) { + ath12k_warn(ab, "unexpected htt mlo peer map event len %u\n", + skb->len); + return; + } + + raw_peer_id = le32_get_bits(ev->info0, + HTT_T2H_MLO_PEER_MAP_INFO0_MLO_PEER_ID); + peer_id = raw_peer_id | ATH12K_PEER_ML_ID_VALID; + + addr_h16 = le32_get_bits(ev->info1, + HTT_T2H_MLO_PEER_MAP_INFO1_MAC_ADDR_H16); + ath12k_dp_get_mac_addr(le32_to_cpu(ev->mac_addr_l32), addr_h16, + peer_addr); + + ath12k_dbg(ab, ATH12K_DBG_DP_HTT, "htt mlo peer map peer %pM id %u\n", + peer_addr, peer_id); +} + void ath12k_dp_htt_htc_t2h_msg_handler(struct ath12k_base *ab, struct sk_buff *skb) { @@ -659,6 +686,9 @@ void ath12k_dp_htt_htc_t2h_msg_handler(struct ath12k_base *ab, case HTT_T2H_MSG_TYPE_MLO_TIMESTAMP_OFFSET_IND: ath12k_htt_mlo_offset_event_handler(ab, skb); break; + case HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP: + ath12k_dp_htt_mlo_peer_map_handler(ab, skb); + break; default: ath12k_dbg(ab, ATH12K_DBG_DP_HTT, "dp_htt event %d not handled\n", type); diff --git a/drivers/net/wireless/ath/ath12k/dp_htt.h b/drivers/net/wireless/ath/ath12k/dp_htt.h index 987689f11cda..2db7fb27c036 100644 --- a/drivers/net/wireless/ath/ath12k/dp_htt.h +++ b/drivers/net/wireless/ath/ath12k/dp_htt.h @@ -930,6 +930,7 @@ enum htt_t2h_msg_type { HTT_T2H_MSG_TYPE_EXT_STATS_CONF = 0x1c, HTT_T2H_MSG_TYPE_BKPRESSURE_EVENT_IND = 0x24, HTT_T2H_MSG_TYPE_MLO_TIMESTAMP_OFFSET_IND = 0x28, + HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP = 0x29, HTT_T2H_MSG_TYPE_PEER_MAP3 = 0x2b, HTT_T2H_MSG_TYPE_VDEV_TXRX_STATS_PERIODIC_IND = 0x2c, }; @@ -974,11 +975,22 @@ struct htt_t2h_peer_unmap_event { __le32 info1; } __packed; +#define HTT_T2H_MLO_PEER_MAP_INFO0_MLO_PEER_ID GENMASK(23, 8) +#define HTT_T2H_MLO_PEER_MAP_INFO1_MAC_ADDR_H16 GENMASK(15, 0) + +struct htt_t2h_mlo_peer_map_event { + __le32 info0; + __le32 mac_addr_l32; + __le32 info1; + __le32 reserved[5]; +} __packed; + struct htt_resp_msg { union { struct htt_t2h_version_conf_msg version_msg; struct htt_t2h_peer_map_event peer_map_ev; struct htt_t2h_peer_unmap_event peer_unmap_ev; + struct htt_t2h_mlo_peer_map_event mlo_peer_map_ev; }; } __packed; -- cgit v1.2.3 From 378e659029d55cf57ee2eddf1d67672ed53c3bb4 Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Mon, 20 Jul 2026 14:43:26 +0800 Subject: wifi: ath12k: introduce host_alloc_ml_id hardware parameter Different ath12k devices diverge on who allocates MLD peer id: WCN7850/QCC2072 have the firmware allocate it and notify the host via HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP event; While others let the host allocate it and pass it down through WMI_PEER_ASSOC_CMDID with ATH12K_WMI_FLAG_MLO_PEER_ID_VALID set. Currently ath12k host allocates this ID and sends it to firmware by default for all devices. This breaks WCN7850/QCC2072, because the host maintained ID may be different from the firmware-allocated one. Consequently data path may fail to find the dp peer and drop some received packets. From user point of view, this results in bugs reported in [1] or the 4-way handshake timeout issue. Add host_alloc_ml_id flag to struct ath12k_hw_params (and a copy on struct ath12k_hw for hot-path access) so subsequent patches can branch on it. Set true for QCN9274/IPQ5332/IPQ5424, false for WCN7850/QCC2072. The flag will be consumed by subsequent patches. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Link: https://bugzilla.kernel.org/show_bug.cgi?id=221039 # 1 Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-5-630632758a80@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath12k/core.h | 1 + drivers/net/wireless/ath/ath12k/hw.h | 2 ++ drivers/net/wireless/ath/ath12k/mac.c | 18 +++++++++++++++++- drivers/net/wireless/ath/ath12k/wifi7/hw.c | 12 ++++++++++++ 4 files changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h index fc5127b5c1a3..1f56474efbea 100644 --- a/drivers/net/wireless/ath/ath12k/core.h +++ b/drivers/net/wireless/ath/ath12k/core.h @@ -793,6 +793,7 @@ struct ath12k_hw { enum ath12k_hw_state state; bool regd_updated; bool use_6ghz_regd; + bool host_alloc_ml_id; u8 num_radio; diff --git a/drivers/net/wireless/ath/ath12k/hw.h b/drivers/net/wireless/ath/ath12k/hw.h index 86fb8b719613..8d2fa0bfb96c 100644 --- a/drivers/net/wireless/ath/ath12k/hw.h +++ b/drivers/net/wireless/ath/ath12k/hw.h @@ -236,6 +236,8 @@ struct ath12k_hw_params { u32 max_client_dbs; u32 max_client_dbs_sbs; } client; + + bool host_alloc_ml_id; }; struct ath12k_hw_ops { diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index 06f1a1ba994a..51641c5ff265 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -15385,8 +15385,9 @@ int ath12k_mac_allocate(struct ath12k_hw_group *ag) int mac_id, device_id, total_radio, num_hw; struct ath12k_base *ab; struct ath12k_hw *ah; - int ret, i, j; + bool conf = false; u8 radio_per_hw; + int ret, i, j; total_radio = 0; for (i = 0; i < ag->num_devices; i++) { @@ -15426,6 +15427,20 @@ int ath12k_mac_allocate(struct ath12k_hw_group *ag) } ab = ag->ab[device_id]; + + /* + * the assumption is all devices within an ah + * share the same host_alloc_ml_id configuration + */ + if (j == 0) { + conf = ab->hw_params->host_alloc_ml_id; + } else if (conf != ab->hw_params->host_alloc_ml_id) { + ath12k_warn(ab, "inconsistent ML ID config within ah, device 0 uses %s allocated ID, while device %u doesn't\n", + conf ? "host" : "firmware", device_id); + ret = -EINVAL; + goto err; + } + pdev_map[j].ab = ab; pdev_map[j].pdev_idx = mac_id; mac_id++; @@ -15450,6 +15465,7 @@ int ath12k_mac_allocate(struct ath12k_hw_group *ag) } ah->dev = ab->dev; + ah->host_alloc_ml_id = conf; ag->ah[i] = ah; ag->num_hw++; diff --git a/drivers/net/wireless/ath/ath12k/wifi7/hw.c b/drivers/net/wireless/ath/ath12k/wifi7/hw.c index d9fdd2fc8298..03dedfd907fc 100644 --- a/drivers/net/wireless/ath/ath12k/wifi7/hw.c +++ b/drivers/net/wireless/ath/ath12k/wifi7/hw.c @@ -442,6 +442,8 @@ static const struct ath12k_hw_params ath12k_wifi7_hw_params[] = { .max_client_dbs = 128, .max_client_dbs_sbs = 128, }, + + .host_alloc_ml_id = true, }, { .name = "wcn7850 hw2.0", @@ -533,6 +535,8 @@ static const struct ath12k_hw_params ath12k_wifi7_hw_params[] = { .max_client_dbs = 128, .max_client_dbs_sbs = 128, }, + + .host_alloc_ml_id = false, }, { .name = "qcn9274 hw2.0", @@ -620,6 +624,8 @@ static const struct ath12k_hw_params ath12k_wifi7_hw_params[] = { .max_client_dbs = 128, .max_client_dbs_sbs = 128, }, + + .host_alloc_ml_id = true, }, { .name = "ipq5332 hw1.0", @@ -700,6 +706,8 @@ static const struct ath12k_hw_params ath12k_wifi7_hw_params[] = { .max_client_dbs = 128, .max_client_dbs_sbs = 128, }, + + .host_alloc_ml_id = true, }, { .name = "qcc2072 hw1.0", @@ -792,6 +800,8 @@ static const struct ath12k_hw_params ath12k_wifi7_hw_params[] = { .max_client_dbs = 128, .max_client_dbs_sbs = 128, }, + + .host_alloc_ml_id = false, }, { .name = "ipq5424 hw1.0", @@ -876,6 +886,8 @@ static const struct ath12k_hw_params ath12k_wifi7_hw_params[] = { .max_client_dbs = 128, .max_client_dbs_sbs = 128, }, + + .host_alloc_ml_id = true, }, }; -- cgit v1.2.3 From 1726a7a10c4fee262549bc6fa142e1051192be0c Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Mon, 20 Jul 2026 14:43:27 +0800 Subject: wifi: ath12k: do not advertise MLD peer ID for firmware-allocate devices ath12k_peer_assoc_h_mlo() unconditionally sets ml->peer_id_valid and copies ahsta->ml_peer_id (with the ATH12K_PEER_ML_ID_VALID bookkeeping bit masked off) into the WMI_PEER_ASSOC_CMDID ML params, which causes ath12k_wmi_send_peer_assoc_cmd() to set ATH12K_WMI_FLAG_MLO_PEER_ID_VALID. This needs to be gated on chips where the firmware allocates the MLD peer ID: - WCN7850/QCC2072 firmware always picks the ID itself and does not honor a host-supplied one, so the value would be silently ignored anyway; - QCC2072 firmware additionally crashes during MLO disconnect when ATH12K_WMI_FLAG_MLO_PEER_ID_VALID was set in the preceding peer assoc, so the bit must not be sent at all. Branch on ah->host_alloc_ml_id: - When true (QCN9274 etc.), behavior is unchanged: peer_id_valid is set and the raw ahsta->ml_peer_id (without the VALID bit) is sent down. - When false (WCN7850, QCC2072), peer_id_valid stays unset and ml_peer_id is sent as 0. The firmware ignores both fields and reports the ID it allocated through HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP. The early-return on ahsta->ml_peer_id == ATH12K_MLO_PEER_ID_INVALID only applies on the host-alloc path, since on the firmware-alloc path the value is ATH12K_MLO_PEER_ID_PENDING here, not INVALID. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-6-630632758a80@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath12k/mac.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index 51641c5ff265..1004c290e5d0 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -3533,11 +3533,16 @@ static void ath12k_peer_assoc_h_mlo(struct ath12k_link_sta *arsta, struct ath12k_sta *ahsta = arsta->ahsta; struct ath12k_link_sta *arsta_p; struct ath12k_link_vif *arvif; + struct ath12k_hw *ah = arsta->arvif->ar->ah; unsigned long links; u8 link_id; int i; - if (!sta->mlo || ahsta->ml_peer_id == ATH12K_MLO_PEER_ID_INVALID) + if (!sta->mlo) + return; + + if (ah->host_alloc_ml_id && + ahsta->ml_peer_id == ATH12K_MLO_PEER_ID_INVALID) return; ml->enabled = true; @@ -3545,16 +3550,25 @@ static void ath12k_peer_assoc_h_mlo(struct ath12k_link_sta *arsta, /* For now considering the primary umac based on assoc link */ ml->primary_umac = arsta->is_assoc_link; - ml->peer_id_valid = true; + /* + * Only chips that allocate the MLD peer ID on the host send a valid + * ml_peer_id in WMI_PEER_ASSOC_CMDID. For chips where the firmware + * picks the ID, leave peer_id_valid false to avoid unexpected issues. + */ + ml->peer_id_valid = ah->host_alloc_ml_id; ml->logical_link_idx_valid = true; ether_addr_copy(ml->mld_addr, sta->addr); ml->logical_link_idx = arsta->link_idx; /* * WMI_MLO_PEER_ASSOC_PARAMS expects the raw ML peer ID without - * the host-side ATH12K_PEER_ML_ID_VALID bookkeeping bit. + * the host-side ATH12K_PEER_ML_ID_VALID bookkeeping bit. For chips + * where the firmware allocates the ID, the field is unused (the + * firmware always allocates regardless of the value here); send 0 + * to make that intent explicit. */ - ml->ml_peer_id = ahsta->ml_peer_id & ~ATH12K_PEER_ML_ID_VALID; + ml->ml_peer_id = ah->host_alloc_ml_id ? + (ahsta->ml_peer_id & ~ATH12K_PEER_ML_ID_VALID) : 0; ml->ieee_link_id = arsta->link_id; ml->num_partner_links = 0; ml->eml_cap = sta->eml_cap; -- cgit v1.2.3 From a7619b3bcba42be62b3b4b941d4175234dce34f0 Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Mon, 20 Jul 2026 14:43:28 +0800 Subject: wifi: ath12k: defer dp_peer registration when firmware allocates MLD peer ID For chips with host_alloc_ml_id=true (QCN9274 etc.), the host allocates the MLD peer ID up front; ath12k_dp_peer_create() publishes the dp_peer into dp_hw->dp_peers[] using that ID immediately. WCN7850/QCC2072 does not work that way: the firmware picks the ID and only tells the host afterwards via HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP, so the publication has to be delayed until the event arrives. Introduce ATH12K_MLO_PEER_ID_PENDING (0xFFFE) as a sentinel for "is_mlo, but ID not yet known". On the firmware-allocates path: - ath12k_mac_op_sta_state(NOTEXIST->NONE) skips ath12k_peer_ml_alloc() and stores PENDING in ahsta->ml_peer_id and dp_params.peer_id; - ath12k_dp_peer_create() skips dp_peer registration until a real ID is known; - ath12k_peer_create() leaves peer->ml_id at INVALID so consumer sites do not treat PENDING as a real ID; - ath12k_peer_ml_free() and ath12k_mac_dp_peer_cleanup() skip the dp_peers[] write and the free_ml_peer_id_map clear when host_alloc_ml_id is false or the ID is still PENDING. The HTT handler change that resolves the PENDING ID is added in a follow-up patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-7-630632758a80@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath12k/core.h | 1 + drivers/net/wireless/ath/ath12k/dp_peer.c | 23 +++++++++++++++-------- drivers/net/wireless/ath/ath12k/mac.c | 22 ++++++++++++++++------ drivers/net/wireless/ath/ath12k/peer.c | 20 +++++++++++++++++--- 4 files changed, 49 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h index 1f56474efbea..8769b41f5db5 100644 --- a/drivers/net/wireless/ath/ath12k/core.h +++ b/drivers/net/wireless/ath/ath12k/core.h @@ -72,6 +72,7 @@ #define ATH12K_MAX_MLO_PEERS 256 #define ATH12K_MLO_PEER_ID_INVALID 0xFFFF +#define ATH12K_MLO_PEER_ID_PENDING 0xFFFE #define ATH12K_INVALID_RSSI_FULL -1 #define ATH12K_INVALID_RSSI_EMPTY -128 diff --git a/drivers/net/wireless/ath/ath12k/dp_peer.c b/drivers/net/wireless/ath/ath12k/dp_peer.c index a12073afc307..cd6a0eb207bd 100644 --- a/drivers/net/wireless/ath/ath12k/dp_peer.c +++ b/drivers/net/wireless/ath/ath12k/dp_peer.c @@ -475,7 +475,9 @@ int ath12k_dp_peer_create(struct ath12k_dp_hw *dp_hw, u8 *addr, dp_peer->is_mlo = params->is_mlo; /* - * For MLO client, the host assigns the ML peer ID, so set peer_id in dp_peer + * For MLO client, the ML peer ID, either known or PENDING, needs to be + * initialized here since the following logic depends on it. + * * For non-MLO client, host gets link peer ID from firmware and will be * assigned at the time of link peer creation */ @@ -491,13 +493,17 @@ int ath12k_dp_peer_create(struct ath12k_dp_hw *dp_hw, u8 *addr, list_add(&dp_peer->list, &dp_hw->dp_peers_list); /* - * For MLO client, the peer_id for ath12k_dp_peer is allocated by host - * and that peer_id is known at this point, and hence this ath12k_dp_peer - * can be added to the RCU table using the peer_id. - * For non-MLO client, this addition to RCU table shall be done at the - * time of assignment of ath12k_dp_link_peer to ath12k_dp_peer. + * For an MLO client whose ML peer ID is allocated by the host, the + * peer_id is known here and the dp_peer can be added to the RCU + * table using it. For an MLO client on chips where the firmware + * allocates the ID, peer_id is ATH12K_MLO_PEER_ID_PENDING and the + * RCU table publish is deferred to the + * HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP handler. For a non-MLO client + * the publish happens later, at the time of assignment of + * ath12k_dp_link_peer to ath12k_dp_peer. */ - if (dp_peer->is_mlo) + if (dp_peer->is_mlo && + dp_peer->peer_id != ATH12K_MLO_PEER_ID_PENDING) rcu_assign_pointer(dp_hw->dp_peers[dp_peer->peer_id], dp_peer); spin_unlock_bh(&dp_hw->peer_lock); @@ -518,7 +524,8 @@ void ath12k_dp_peer_delete(struct ath12k_dp_hw *dp_hw, u8 *addr, return; } - if (dp_peer->is_mlo) + if (dp_peer->is_mlo && + dp_peer->peer_id != ATH12K_MLO_PEER_ID_PENDING) rcu_assign_pointer(dp_hw->dp_peers[dp_peer->peer_id], NULL); list_del(&dp_peer->list); diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index 1004c290e5d0..760afe1c7f7a 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -1289,7 +1289,9 @@ void ath12k_mac_dp_peer_cleanup(struct ath12k_hw *ah) spin_lock_bh(&dp_hw->peer_lock); list_for_each_entry_safe(dp_peer, tmp, &dp_hw->dp_peers_list, list) { if (dp_peer->is_mlo) { - rcu_assign_pointer(dp_hw->dp_peers[dp_peer->peer_id], NULL); + if (dp_peer->peer_id != ATH12K_MLO_PEER_ID_PENDING) + rcu_assign_pointer(dp_hw->dp_peers[dp_peer->peer_id], + NULL); ath12k_peer_ml_free(ah, ath12k_sta_to_ahsta(dp_peer->sta)); } @@ -7750,11 +7752,19 @@ int ath12k_mac_op_sta_state(struct ieee80211_hw *hw, /* ML sta */ if (sta->mlo && !ahsta->links_map && (hweight16(sta->valid_links) == 1)) { - ahsta->ml_peer_id = ath12k_peer_ml_alloc(ah); - if (ahsta->ml_peer_id == ATH12K_MLO_PEER_ID_INVALID) { - ath12k_hw_warn(ah, "unable to allocate ML peer id for sta %pM", - sta->addr); - goto exit; + if (ah->host_alloc_ml_id) { + ahsta->ml_peer_id = ath12k_peer_ml_alloc(ah); + if (ahsta->ml_peer_id == ATH12K_MLO_PEER_ID_INVALID) { + ath12k_hw_warn(ah, "unable to allocate ML peer id for sta %pM", + sta->addr); + goto exit; + } + } else { + /* + * firmware allocates the ML peer ID and notifies + * the host via HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP + */ + ahsta->ml_peer_id = ATH12K_MLO_PEER_ID_PENDING; } dp_params.is_mlo = true; diff --git a/drivers/net/wireless/ath/ath12k/peer.c b/drivers/net/wireless/ath/ath12k/peer.c index 5dd7c6470219..ed0524ddff80 100644 --- a/drivers/net/wireless/ath/ath12k/peer.c +++ b/drivers/net/wireless/ath/ath12k/peer.c @@ -230,7 +230,16 @@ int ath12k_peer_create(struct ath12k *ar, struct ath12k_link_vif *arvif, /* Fill ML info into created peer */ if (sta->mlo) { ml_peer_id = ahsta->ml_peer_id; - peer->ml_id = ml_peer_id; + /* + * For chips where firmware allocates the ML peer ID, + * ml_peer_id is ATH12K_MLO_PEER_ID_PENDING here. The + * MLO_RX_PEER_MAP HTT event handler fixes up + * peer->ml_id once the ID is known. + */ + if (ml_peer_id == ATH12K_MLO_PEER_ID_PENDING) + peer->ml_id = ATH12K_MLO_PEER_ID_INVALID; + else + peer->ml_id = ml_peer_id; ether_addr_copy(peer->ml_addr, sta->addr); /* the assoc link is considered primary for now */ @@ -285,8 +294,13 @@ void ath12k_peer_ml_free(struct ath12k_hw *ah, struct ath12k_sta *ahsta) { lockdep_assert_wiphy(ah->hw->wiphy); - if (ahsta->ml_peer_id < - (ATH12K_MAX_MLO_PEERS | ATH12K_PEER_ML_ID_VALID)) + /* + * Only devices that allocate the ID on the host own a slot in + * free_ml_peer_id_map. + */ + if (ah->host_alloc_ml_id && + (ahsta->ml_peer_id < + (ATH12K_MAX_MLO_PEERS | ATH12K_PEER_ML_ID_VALID))) clear_bit(ahsta->ml_peer_id & ~ATH12K_PEER_ML_ID_VALID, ah->free_ml_peer_id_map); ahsta->ml_peer_id = ATH12K_MLO_PEER_ID_INVALID; -- cgit v1.2.3 From 469d7e6077c1665754eaf330e1feabdca7b060ae Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Mon, 20 Jul 2026 14:43:29 +0800 Subject: wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event Add ath12k_dp_peer_fixup_peer_id() and call it from the HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP handler. For devices where the firmware allocates the MLD peer ID, this is the point at which all data structures that were left with ATH12K_MLO_PEER_ID_PENDING or ATH12K_MLO_PEER_ID_INVALID get their real ID: - dp_peer->peer_id is updated and the dp_peer is published into dp_hw->dp_peers[]; - every existing dp_link_peer in dp_peer->link_peers[] gets its ml_id set to the same value; - ahsta->ml_peer_id is updated to the same value so peer_assoc, sta_state and cleanup paths see a consistent ID. Devices with host_alloc_ml_id == true also receive the same HTT event, but the firmware-reported ID always matches the host-allocated one and everything has already been populated by ath12k_dp_peer_create(); Skips the helper entirely on those devices. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221039 Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-8-630632758a80@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath12k/core.c | 2 ++ drivers/net/wireless/ath/ath12k/core.h | 1 + drivers/net/wireless/ath/ath12k/dp_htt.c | 19 +++++++++++ drivers/net/wireless/ath/ath12k/dp_peer.c | 52 +++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath12k/dp_peer.h | 2 ++ drivers/net/wireless/ath/ath12k/mac.c | 24 ++++++++++++++ 6 files changed, 100 insertions(+) diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c index 742d4fd1b598..e87165e4f4b3 100644 --- a/drivers/net/wireless/ath/ath12k/core.c +++ b/drivers/net/wireless/ath/ath12k/core.c @@ -1544,6 +1544,8 @@ static void ath12k_core_pre_reconfigure_recovery(struct ath12k_base *ab) } wiphy_unlock(ah->hw->wiphy); + + complete(&ah->peer_ml_id_done); } wake_up(&ab->wmi_ab.tx_credits_wq); diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h index 8769b41f5db5..30726e580833 100644 --- a/drivers/net/wireless/ath/ath12k/core.h +++ b/drivers/net/wireless/ath/ath12k/core.h @@ -795,6 +795,7 @@ struct ath12k_hw { bool regd_updated; bool use_6ghz_regd; bool host_alloc_ml_id; + struct completion peer_ml_id_done; u8 num_radio; diff --git a/drivers/net/wireless/ath/ath12k/dp_htt.c b/drivers/net/wireless/ath/ath12k/dp_htt.c index 150b190f9c7f..68968f96b4f1 100644 --- a/drivers/net/wireless/ath/ath12k/dp_htt.c +++ b/drivers/net/wireless/ath/ath12k/dp_htt.c @@ -6,6 +6,7 @@ #include "core.h" #include "peer.h" +#include "dp_peer.h" #include "htc.h" #include "dp_htt.h" #include "debugfs_htt_stats.h" @@ -582,6 +583,7 @@ static void ath12k_dp_htt_mlo_peer_map_handler(struct ath12k_base *ab, struct htt_t2h_mlo_peer_map_event *ev = &resp->mlo_peer_map_ev; u16 raw_peer_id, peer_id, addr_h16; u8 peer_addr[ETH_ALEN]; + int ret; if (skb->len < sizeof(*ev)) { ath12k_warn(ab, "unexpected htt mlo peer map event len %u\n", @@ -600,6 +602,23 @@ static void ath12k_dp_htt_mlo_peer_map_handler(struct ath12k_base *ab, ath12k_dbg(ab, ATH12K_DBG_DP_HTT, "htt mlo peer map peer %pM id %u\n", peer_addr, peer_id); + + /* + * Fix up the dp_peer entry created with ATH12K_MLO_PEER_ID_PENDING + * earlier; on chips with host_alloc_ml_id == false this is the only + * point at which the host learns the firmware-assigned ID. Chips + * that allocate the ID on the host also receive this event but the + * firmware-reported ID matches the host-allocated one, so there is + * nothing to fix up. + */ + if (!ab->hw_params->host_alloc_ml_id) { + ret = ath12k_dp_peer_fixup_peer_id(ab, peer_addr, + peer_id); + if (ret) + ath12k_warn(ab, + "failed to fix up peer id %u for dp peer %pM: %d\n", + peer_id, peer_addr, ret); + } } void ath12k_dp_htt_htc_t2h_msg_handler(struct ath12k_base *ab, diff --git a/drivers/net/wireless/ath/ath12k/dp_peer.c b/drivers/net/wireless/ath/ath12k/dp_peer.c index cd6a0eb207bd..bb5341b4251a 100644 --- a/drivers/net/wireless/ath/ath12k/dp_peer.c +++ b/drivers/net/wireless/ath/ath12k/dp_peer.c @@ -702,3 +702,55 @@ void ath12k_dp_link_peer_reset_rx_stats(struct ath12k_dp *dp, const u8 *addr) if (rx_stats) memset(rx_stats, 0, sizeof(*rx_stats)); } + +int ath12k_dp_peer_fixup_peer_id(struct ath12k_base *ab, + const u8 *peer_addr, u16 peer_id) +{ + struct ath12k_dp_link_peer *link_peer; + struct ath12k_dp_peer *dp_peer = NULL; + struct ath12k_hw_group *ag = ab->ag; + struct ath12k_dp_hw *dp_hw = NULL; + struct ath12k_hw *ah; + int i; + + if (peer_id >= (ATH12K_PEER_ML_ID_VALID | ATH12K_MAX_MLO_PEERS)) + return -EINVAL; + + for (i = 0; i < ag->num_hw; i++) { + ah = ag->ah[i]; + if (!ah) + continue; + + spin_lock_bh(&ah->dp_hw.peer_lock); + dp_peer = ath12k_dp_peer_find_by_addr(&ah->dp_hw, + (u8 *)peer_addr); + if (dp_peer) { + dp_hw = &ah->dp_hw; + break; + } + spin_unlock_bh(&ah->dp_hw.peer_lock); + } + + if (!dp_peer) + return -ENOENT; + + /* dp_hw->peer_lock is held */ + + dp_peer->peer_id = peer_id; + rcu_assign_pointer(dp_hw->dp_peers[peer_id], dp_peer); + + for (i = 0; i < ATH12K_NUM_MAX_LINKS; i++) { + link_peer = rcu_dereference_protected(dp_peer->link_peers[i], + lockdep_is_held(&dp_hw->peer_lock)); + if (link_peer) + link_peer->ml_id = peer_id; + } + + ath12k_sta_to_ahsta(dp_peer->sta)->ml_peer_id = peer_id; + + spin_unlock_bh(&dp_hw->peer_lock); + + complete(&ah->peer_ml_id_done); + + return 0; +} diff --git a/drivers/net/wireless/ath/ath12k/dp_peer.h b/drivers/net/wireless/ath/ath12k/dp_peer.h index 7c9709bf717b..3503840b0329 100644 --- a/drivers/net/wireless/ath/ath12k/dp_peer.h +++ b/drivers/net/wireless/ath/ath12k/dp_peer.h @@ -181,4 +181,6 @@ struct ath12k_dp_peer *ath12k_dp_peer_find_by_peerid(struct ath12k_pdev_dp *dp_p struct ath12k_dp_link_peer * ath12k_dp_link_peer_find_by_peerid(struct ath12k_pdev_dp *dp_pdev, u16 peer_id); void ath12k_dp_link_peer_free(struct ath12k_dp_link_peer *peer); +int ath12k_dp_peer_fixup_peer_id(struct ath12k_base *ab, const u8 *peer_addr, + u16 peer_id); #endif diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index 760afe1c7f7a..a0928890671a 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -3859,9 +3859,11 @@ static u32 ath12k_mac_ieee80211_sta_bw_to_wmi(struct ath12k *ar, static int ath12k_mac_peer_assoc(struct ath12k *ar, struct ath12k_wmi_peer_assoc_arg *peer_arg) { + struct ath12k_hw *ah = ath12k_ar_to_ah(ar); int ret; reinit_completion(&ar->peer_assoc_done); + reinit_completion(&ah->peer_ml_id_done); ret = ath12k_wmi_send_peer_assoc_cmd(ar, peer_arg); if (ret) { @@ -3876,6 +3878,27 @@ static int ath12k_mac_peer_assoc(struct ath12k *ar, return -ETIMEDOUT; } + /* + * For devices where the firmware allocates the MLD peer ID, the host + * learns the real ID only from the MLO_RX_PEER_MAP HTT event, which is + * handled in a softirq (BH workqueue) context that cannot take the + * wiphy lock. Block here, while still holding the wiphy lock, until + * that event has fixed up the ID. This serialises the fixup against + * all other wiphy-locked ml_peer_id accesses. + * + * The firmware sends the event only once, in response to the assoc-link + * peer assoc, so block only for that link. + */ + if (!ah->host_alloc_ml_id && + peer_arg->is_assoc && + peer_arg->ml.enabled && + peer_arg->ml.assoc_link && + !wait_for_completion_timeout(&ah->peer_ml_id_done, 1 * HZ)) { + ath12k_warn(ar->ab, "failed to get MLO peer map event for %pM vdev %i\n", + peer_arg->peer_mac, peer_arg->vdev_id); + return -ETIMEDOUT; + } + return 0; } @@ -15335,6 +15358,7 @@ static struct ath12k_hw *ath12k_mac_hw_allocate(struct ath12k_hw_group *ag, ah->num_radio = num_pdev_map; mutex_init(&ah->hw_mutex); + init_completion(&ah->peer_ml_id_done); spin_lock_init(&ah->dp_hw.peer_lock); INIT_LIST_HEAD(&ah->dp_hw.dp_peers_list); -- cgit v1.2.3 From 83195b778f2d109a3a4f3ffaba4dce7e4cdb58aa Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:22 -0400 Subject: drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size Two sites in vmwgfx_resource.c assign boolean literals to res->guest_memory_size, which is an unsigned long allocation-size field; the intended target is the adjacent res->guest_memory_dirty bitfield. After the assignments the field holds 0 or 1 instead of the resource's MOB allocation size: - vmw_resource_release() writes 0 (false), and - vmw_resource_unbind_list() writes 1 (true). Subsequent revalidation paths read guest_memory_size when computing the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer allocation size (vmw_resource_buf_alloc()), producing zero-length walks or wrap-around ranges that read or write past the MOB bitmap. The dirty-tracking intent of the original code (mark the resource as dirtied since the last sync) is also lost, since guest_memory_dirty is never updated. Rename both assignments to guest_memory_dirty. Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-2-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 388011696941..e3a187a2c7a1 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -136,7 +136,7 @@ static void vmw_resource_release(struct kref *kref) val_buf.num_shared = 0; res->func->unbind(res, false, &val_buf); } - res->guest_memory_size = false; + res->guest_memory_dirty = false; vmw_resource_mob_detach(res); if (res->dirty) res->func->dirty_free(res); @@ -773,7 +773,7 @@ void vmw_resource_unbind_list(struct vmw_bo *vbo) if (!WARN_ON_ONCE(!res->func->unbind)) (void) res->func->unbind(res, res->res_dirty, &val_buf); - res->guest_memory_size = true; + res->guest_memory_dirty = true; res->res_dirty = false; vmw_resource_mob_detach(res); } -- cgit v1.2.3 From 55ec09c9ce10b1272802c7ab6c1be2ea0dbc68db Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:23 -0400 Subject: drm/vmwgfx: reject DX_BIND_QUERY without a DX context vmw_cmd_dx_bind_query() unconditionally dereferences sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer dereference from any render-node fd by submitting an execbuf with dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY opcode in the command stream: dx_ctx_node is left NULL and the kernel oopses on the assignment. The same NULL is then re-read in vmw_resources_reserve() via vmw_context_get_dx_query_mob(). All sibling DX handlers fail-close on a missing dx_ctx_node using VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up front before any relocation state is published. Fixes: 9c079b8ce8bf ("drm/vmwgfx: Adapt execbuf to the new validation api") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-3-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index e1f18020170a..b07f052474d0 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -1272,9 +1272,13 @@ static int vmw_cmd_dx_bind_query(struct vmw_private *dev_priv, SVGA3dCmdHeader *header) { VMW_DECLARE_CMD_VAR(*cmd, SVGA3dCmdDXBindQuery); + struct vmw_ctx_validation_info *ctx_node = VMW_GET_CTX_NODE(sw_context); struct vmw_bo *vmw_bo; int ret; + if (!ctx_node) + return -EINVAL; + cmd = container_of(header, typeof(*cmd), header); /* @@ -1288,7 +1292,7 @@ static int vmw_cmd_dx_bind_query(struct vmw_private *dev_priv, return ret; sw_context->dx_query_mob = vmw_bo; - sw_context->dx_query_ctx = sw_context->dx_ctx_node->ctx; + sw_context->dx_query_ctx = ctx_node->ctx; return 0; } -- cgit v1.2.3 From f47d542d5912f236273399d7139b522f6950e2e4 Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:24 -0400 Subject: drm/vmwgfx: clamp dirty-page range with min, not max vmw_bo_dirty_transfer_to_res() and vmw_bo_dirty_clear() compute the intersection of a resource's page range with the BO's tracked dirty range, but clamp res_end against dirty->end with max() instead of min(). When dirty->end exceeds the resource end, the loop walks past the resource's pages, calls vmw_resource_dirty_update() for ranges owned by other resources sharing the same backing MOB and clears their pending dirty bits via bitmap_clear(). The result is silent loss of writeback for unrelated resources whenever two resources share a MOB. Use min() in both functions so the loop is bounded to the intersection of the resource and dirty ranges. Fixes: b7468b15d271 ("drm/vmwgfx: Implement an infrastructure for write-coherent resources") Fixes: 965544150d1c ("drm/vmwgfx: Refactor cursor handling") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-4-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_page_dirty.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_page_dirty.c b/drivers/gpu/drm/vmwgfx/vmwgfx_page_dirty.c index 45561bc1c9ef..8ab88f388652 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_page_dirty.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_page_dirty.c @@ -311,7 +311,7 @@ void vmw_bo_dirty_transfer_to_res(struct vmw_resource *res) return; cur = max(res_start, dirty->start); - res_end = max(res_end, dirty->end); + res_end = min(res_end, dirty->end); while (cur < res_end) { unsigned long num; @@ -347,7 +347,7 @@ void vmw_bo_dirty_clear(struct vmw_bo *vbo) return; cur = max(res_start, dirty->start); - res_end = max(res_end, dirty->end); + res_end = min(res_end, dirty->end); while (cur < res_end) { unsigned long num; -- cgit v1.2.3 From 250af2e8c3e90dc978e062a936b633870a22e660 Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:25 -0400 Subject: drm/vmwgfx: take fman->lock around fence list mutation in fifo_down vmw_fence_fifo_down() drops fman->lock to wait on a fence and, on timeout, mutates fman->fence_list via list_del_init() and signals the fence without re-acquiring the lock. __vmw_fences_update() walks and removes entries from the same list under fman->lock from any other waiter, the fence-IRQ thread, or vmw_fences_update(), so the unlocked list_del_init() can corrupt the list head. Re-take fman->lock before manipulating fence->head and use dma_fence_signal_locked(). Wrap the locked signalling in dma_fence_begin_signalling() / dma_fence_end_signalling() so the lockdep annotation that dma_fence_signal() previously provided is preserved (the same pattern as __vmw_fences_update()). dma_fence_put() is moved outside the lock to avoid a recursive acquire from vmw_fence_obj_destroy(), which also takes fman->lock. Fixes: ae2a104058e2 ("vmwgfx: Implement fence objects") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-5-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_fence.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c index 4ef84ff9b638..384c6736cf6b 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c @@ -367,13 +367,24 @@ void vmw_fence_fifo_down(struct vmw_fence_manager *fman) ret = vmw_fence_obj_wait(fence, false, false, VMW_FENCE_WAIT_TIMEOUT); + spin_lock(&fman->lock); if (unlikely(ret != 0)) { + bool cookie = dma_fence_begin_signalling(); + list_del_init(&fence->head); - dma_fence_signal(&fence->base); + if (fence->waiter_added) { + vmw_seqno_waiter_remove(fman->dev_priv); + fence->waiter_added = false; + } + dma_fence_signal_locked(&fence->base); + dma_fence_end_signalling(cookie); } BUG_ON(!list_empty(&fence->head)); + spin_unlock(&fman->lock); + dma_fence_put(&fence->base); + spin_lock(&fman->lock); } spin_unlock(&fman->lock); -- cgit v1.2.3 From f739416dc555fa205a785e5135d73fa39b26f35d Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:26 -0400 Subject: drm/vmwgfx: drop dma_buf reference on foreign-fd prime import ttm_prime_fd_to_handle() returns -ENOSYS when the imported fd's dma_buf->ops do not match the ttm_object_device's ops, but does so without releasing the reference acquired by dma_buf_get(). Any unprivileged renderD client passing a non-vmwgfx prime fd through the DRM_VMW_GB_SURFACE_REF{,_EXT} path leaks one dma_buf reference per call and indefinitely pins the foreign exporter's GEM resources. Funnel the error path through the existing dma_buf_put() so the reference is always dropped. Fixes: 65981f7681ab ("drm/ttm: Add a minimal prime implementation for ttm base objects") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-6-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/ttm_object.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/ttm_object.c b/drivers/gpu/drm/vmwgfx/ttm_object.c index 2421b0dd057c..f9042bafdc93 100644 --- a/drivers/gpu/drm/vmwgfx/ttm_object.c +++ b/drivers/gpu/drm/vmwgfx/ttm_object.c @@ -547,14 +547,17 @@ int ttm_prime_fd_to_handle(struct ttm_object_file *tfile, if (IS_ERR(dma_buf)) return PTR_ERR(dma_buf); - if (dma_buf->ops != &tdev->ops) - return -ENOSYS; + if (dma_buf->ops != &tdev->ops) { + ret = -ENOSYS; + goto out; + } prime = (struct ttm_prime_object *) dma_buf->priv; base = &prime->base; *handle = base->handle; ret = ttm_ref_object_add(tfile, base, NULL, false); +out: dma_buf_put(dma_buf); return ret; -- cgit v1.2.3 From 85891d174707d8bddcec7a888fb4e1d17def34f3 Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:27 -0400 Subject: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. Fixes: 7a73ba7469cb ("drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-7-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index b07f052474d0..2410d53a75aa 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -1571,11 +1571,17 @@ static int vmw_cmd_draw(struct vmw_private *dev_priv, uint32_t maxnum; int ret; + cmd = container_of(header, typeof(*cmd), header); + + if (unlikely(header->size < sizeof(cmd->body))) { + VMW_DEBUG_USER("Illegal DRAW_PRIMITIVES header size.\n"); + return -EINVAL; + } + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); if (unlikely(ret != 0)) return ret; - cmd = container_of(header, typeof(*cmd), header); maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); if (unlikely(cmd->body.numVertexDecls > maxnum)) { -- cgit v1.2.3 From f4f1db96bfd68b81053693ba53405b6f510ac16c Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:28 -0400 Subject: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit. Fixes: 4e4ddd477743 ("drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-8-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 2410d53a75aa..a9136a6523cb 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -1510,6 +1510,12 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, bool dirty; cmd = container_of(header, typeof(*cmd), header); + + if (unlikely(header->size < sizeof(cmd->body) + sizeof(*suffix))) { + VMW_DEBUG_USER("Illegal SVGA_3D_CMD_SURFACE_DMA size.\n"); + return -EINVAL; + } + suffix = (SVGA3dCmdSurfaceDMASuffix *)((unsigned long) &cmd->body + header->size - sizeof(*suffix)); -- cgit v1.2.3 From 05eaa887e7b4f40fba425f8a1d7a5a8a043092a6 Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:29 -0400 Subject: drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while still leaving the rest of the driver in a state that calls vmw_vkms_cleanup() at module unload: 1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or returning an oversized buffer -- the common case on hosts without a VBLANK guestinfo entry -- early-returned before the workqueue allocation. 2. alloc_ordered_workqueue() returning NULL on memory pressure. vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which dereferences wq->name and panics. Fix the first case by removing the early return: vmw->vkms_enabled is already false on the rpci-failure path so no work will ever be queued, and allocating the workqueue unconditionally keeps the control flow simple. Fix the second case by guarding the cleanup with a NULL check, since alloc_ordered_workqueue() can still fail under low memory. Fixes: 7b0062036c3b ("drm/vmwgfx: Implement virtual crc generation") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-9-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_vkms.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_vkms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_vkms.c index 7b8163b5e501..3d0d5dfa869f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_vkms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_vkms.c @@ -206,14 +206,14 @@ vmw_vkms_init(struct vmw_private *vmw) vmw->vkms_enabled = false; ret = vmw_host_get_guestinfo(GUESTINFO_VBLANK, buffer, &buf_len); - if (ret || buf_len > max_buf_len) - return; - buffer[buf_len] = '\0'; + if (!ret && buf_len <= max_buf_len) { + buffer[buf_len] = '\0'; - ret = kstrtobool(buffer, &vmw->vkms_enabled); - if (!ret && vmw->vkms_enabled) { - ret = drm_vblank_init(&vmw->drm, VMWGFX_NUM_DISPLAY_UNITS); - vmw->vkms_enabled = (ret == 0); + ret = kstrtobool(buffer, &vmw->vkms_enabled); + if (!ret && vmw->vkms_enabled) { + ret = drm_vblank_init(&vmw->drm, VMWGFX_NUM_DISPLAY_UNITS); + vmw->vkms_enabled = (ret == 0); + } } vmw->crc_workq = alloc_ordered_workqueue("vmwgfx_crc_generator", 0); @@ -228,7 +228,8 @@ vmw_vkms_init(struct vmw_private *vmw) void vmw_vkms_cleanup(struct vmw_private *vmw) { - destroy_workqueue(vmw->crc_workq); + if (vmw->crc_workq) + destroy_workqueue(vmw->crc_workq); } bool -- cgit v1.2.3 From d5ed8749168ad13c0dbaa8300f68d854b6076966 Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:30 -0400 Subject: drm/vmwgfx: enforce cursor size limits for MOB cursors vmw_cursor_plane_atomic_check() bounds cursor width and height only on the legacy update path; the SVGA_CAP2_CURSOR_MOB path -- the default on modern hosts -- accepts any size. When the requested size exceeds SVGA_REG_CURSOR_MAX_DIMENSION or SVGA_REG_MOB_MAX_SIZE, vmw_cursor_mob_get() returns -EINVAL and leaves vps->cursor.mob NULL. Its return value is then discarded in vmw_cursor_plane_prepare_fb(), so the subsequent vmw_cursor_update_mob() calls vmw_bo_map_and_cache(NULL) and oopses inside vmw_bo_map_and_cache_size() on the tbo.base.size load. Reachable from any DRM master via DRM_IOCTL_MODE_CURSOR2 with a sufficiently large width or height (e.g. cursor_max_dim + 1). Reject oversized cursors in atomic_check for both MOB-backed cursor update types. The MOB byte-size limit only applies to the SVGA_CAP2_CURSOR_MOB path (vmw_cursor_mob_size() returns 0 for GB_ONLY); compute the required MOB size in 64-bit to avoid overflow when very large dimensions are requested. In prepare_fb only call vmw_cursor_mob_get()/_map() for VMW_CURSOR_UPDATE_MOB -- the GB_ONLY path uses bo->map.virtual directly and would otherwise be silently downgraded to NONE on hosts without SVGA_CAP2_CURSOR_MOB (where vmw_cursor_mob_get() always returns -EINVAL). Degrade the update to NONE if vmw_cursor_mob_get() or vmw_cursor_mob_map() fails so the update path does not run with a NULL backing MOB. Fixes: 965544150d1c ("drm/vmwgfx: Refactor cursor handling") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-10-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_cursor_plane.c | 49 +++++++++++++++++++++++++--- 1 file changed, 44 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_cursor_plane.c b/drivers/gpu/drm/vmwgfx/vmwgfx_cursor_plane.c index b010fc7ca68e..d1e7df500190 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_cursor_plane.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_cursor_plane.c @@ -432,6 +432,7 @@ vmw_cursor_mob_map(struct vmw_plane_state *vps) u32 size = vmw_cursor_mob_size(vps->cursor.update_type, vps->base.crtc_w, vps->base.crtc_h); struct vmw_bo *vbo = vps->cursor.mob; + void *map; if (!vbo) return -EINVAL; @@ -446,11 +447,15 @@ vmw_cursor_mob_map(struct vmw_plane_state *vps) if (unlikely(ret != 0)) return -ENOMEM; - vmw_bo_map_and_cache(vbo); + map = vmw_bo_map_and_cache(vbo); + if (!map) { + vmw_bo_unmap(vbo); + ret = -ENOMEM; + } ttm_bo_unreserve(&vbo->tbo); - return 0; + return ret; } /** @@ -663,9 +668,15 @@ int vmw_cursor_plane_prepare_fb(struct drm_plane *plane, !vmw_cursor_buffer_changed(vps, old_vps)) { vps->cursor.update_type = VMW_CURSOR_UPDATE_NONE; - } else { - vmw_cursor_mob_get(vcp, vps); - vmw_cursor_mob_map(vps); + } else if (vps->cursor.update_type == + VMW_CURSOR_UPDATE_MOB && + (vmw_cursor_mob_get(vcp, vps) || + vmw_cursor_mob_map(vps))) { + /* + * Reset the cursor to avoid crashes later. + */ + vps->cursor.update_type = + VMW_CURSOR_UPDATE_NONE; } } } @@ -732,6 +743,34 @@ int vmw_cursor_plane_atomic_check(struct drm_plane *plane, "surface not suitable for cursor\n"); return -EINVAL; } + } else if (update_type == VMW_CURSOR_UPDATE_GB_ONLY || + update_type == VMW_CURSOR_UPDATE_MOB) { + u32 cursor_max_dim = + vmw_read(vmw, SVGA_REG_CURSOR_MAX_DIMENSION); + + if (new_state->crtc_w > cursor_max_dim || + new_state->crtc_h > cursor_max_dim) { + drm_warn(&vmw->drm, + "Cursor dimensions (%d, %d) exceed device max %u\n", + new_state->crtc_w, new_state->crtc_h, + cursor_max_dim); + return -EINVAL; + } + + if (update_type == VMW_CURSOR_UPDATE_MOB) { + u32 mob_max_size = + vmw_read(vmw, SVGA_REG_MOB_MAX_SIZE); + u64 mob_size = (u64)new_state->crtc_w * + new_state->crtc_h * sizeof(u32) + + sizeof(SVGAGBCursorHeader); + + if (mob_size > mob_max_size) { + drm_warn(&vmw->drm, + "Cursor MOB size %llu exceeds device max %u\n", + mob_size, mob_max_size); + return -EINVAL; + } + } } return 0; -- cgit v1.2.3 From e5c3e484e0d84744a9bd9349469cd41dc8666a2f Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:31 -0400 Subject: drm/vmwgfx: skip hash_del_rcu when validation context has no hash table vmw_validation_add_resource() calls hash_add_rcu() only when ctx->sw_context is non-NULL, but the doomed-resource error path calls hash_del_rcu() unconditionally. The validation contexts declared with DECLARE_VAL_CONTEXT(_, NULL, 0) in vmwgfx_kms.c, vmwgfx_scrn.c, vmwgfx_stdu.c and vmwgfx_execbuf.c consequently reach a delete for a node that was never added to any hash chain. That is harmless today, but only incidentally so. hash_del_rcu() is hlist_del_init_rcu(), which is guarded by hlist_unhashed(), and vmw_validation_mem_alloc() hands out memory from __GFP_ZERO pages that are never recycled within a context's lifetime, so node->hash.head.pprev is always NULL and the delete does nothing. Neither property is apparent at the call site, and the asymmetry with the add side invites a real bug the first time either one changes. Mirror the condition from the add side so the node is only unlinked when it was actually linked. No functional change. Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-11-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_validation.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_validation.c b/drivers/gpu/drm/vmwgfx/vmwgfx_validation.c index 35dc94c3db39..45fde7ec514f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_validation.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_validation.c @@ -309,7 +309,8 @@ int vmw_validation_add_resource(struct vmw_validation_context *ctx, } node->res = vmw_resource_reference_unless_doomed(res); if (!node->res) { - hash_del_rcu(&node->hash.head); + if (ctx->sw_context) + hash_del_rcu(&node->hash.head); return -ESRCH; } -- cgit v1.2.3 From 54d56d5b42d2e4c72ba6e365e9774da90698aa22 Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:32 -0400 Subject: drm/vmwgfx: use check_add_overflow for shader size+offset bound vmw_shader_define() validates the user-supplied shader window against its backing buffer with (u64)buffer->tbo.base.size < (u64)size + (u64)offset drm_vmw_shader_create_arg::offset is __u64 in the uapi; when it is near U64_MAX the unsigned addition wraps and the resulting tiny value passes the check. The unbounded offset is then stored in res->guest_memory_offset and forwarded to host SVGA shader-create commands. Use check_add_overflow() to detect the wrap and compare the resulting endpoint against the buffer size. Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-12-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_shader.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c b/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c index eca4e3e97eb4..39811cf19db1 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c @@ -25,6 +25,8 @@ * **************************************************************************/ +#include + #include #include "vmwgfx_binding.h" @@ -685,7 +687,7 @@ int vmw_shader_destroy_ioctl(struct drm_device *dev, void *data, static int vmw_user_shader_alloc(struct vmw_private *dev_priv, struct vmw_bo *buffer, size_t shader_size, - size_t offset, + u64 offset, SVGA3dShaderType shader_type, uint8_t num_input_sig, uint8_t num_output_sig, @@ -739,7 +741,7 @@ out: static struct vmw_resource *vmw_shader_alloc(struct vmw_private *dev_priv, struct vmw_bo *buffer, size_t shader_size, - size_t offset, + u64 offset, SVGA3dShaderType shader_type) { struct vmw_shader *shader; @@ -768,7 +770,7 @@ out_err: static int vmw_shader_define(struct drm_device *dev, struct drm_file *file_priv, enum drm_vmw_shader_type shader_type_drm, - u32 buffer_handle, size_t size, size_t offset, + u32 buffer_handle, size_t size, u64 offset, uint8_t num_input_sig, uint8_t num_output_sig, uint32_t *shader_handle) { @@ -779,13 +781,16 @@ static int vmw_shader_define(struct drm_device *dev, struct drm_file *file_priv, int ret; if (buffer_handle != SVGA3D_INVALID_ID) { + u64 end; + ret = vmw_user_bo_lookup(file_priv, buffer_handle, &buffer); if (unlikely(ret != 0)) { VMW_DEBUG_USER("Couldn't find buffer for shader creation.\n"); return ret; } - if ((u64)buffer->tbo.base.size < (u64)size + (u64)offset) { + if (check_add_overflow((u64)size, (u64)offset, &end) || + end > buffer->tbo.base.size) { VMW_DEBUG_USER("Illegal buffer- or shader size.\n"); ret = -EINVAL; goto out_bad_arg; -- cgit v1.2.3 From 706c93c5813caabbb0d0a576c017d15aeec2c113 Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Tue, 5 May 2026 18:22:33 -0400 Subject: drm/vmwgfx: validate external BO copy bounds for both stride paths vmw_external_bo_copy() trusts caller-supplied offsets, strides, and heights and operates on imported dma-buf vmaps: - The equal-stride memcpy() bound was clamped after subtracting the offsets from dst_size and src_size; an offset larger than the BO size wraps the unsigned subtraction to a huge value and the resulting memcpy() runs off the end of the vmap. dst_stride * height is also a u32 multiplication that can overflow. - The non-equal-stride row-by-row path had no bound at all. The loop touches bytes through offset + (height - 1) * stride + width_in_bytes, with only a WARN_ON(dst_stride < width_in_bytes), and could likewise step past the end of either mapping. The offsets and strides are derived from STDU/SOU plane state, so a configured CRTC submitting a crafted atomic commit on an imported framebuffer can reach this path. Validate the exact row-copy endpoint against each BO's size up front using check_mul_overflow() and check_add_overflow(). Use the bulk memcpy() path only when width_in_bytes covers the whole stride; otherwise copy one row at a time so partial-row updates near the bottom of a framebuffer remain valid. Also reject zero strides and stride < width_in_bytes, both of which the row-by-row path cannot represent safely. Fixes: 50f119925091 ("drm/vmwgfx: Fix prime with external buffers") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Zack Rusin Reviewed-by: Ian Forbes Link: https://patch.msgid.link/20260505222728.519626-13-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_blit.c | 39 ++++++++++++++++++++++++++++-------- 1 file changed, 31 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c b/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c index 135b75a3e013..56f965ec99dc 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c @@ -30,6 +30,7 @@ #include "vmwgfx_bo.h" #include +#include /* * Template that implements find_first_diff() for a generic @@ -463,19 +464,42 @@ static int vmw_external_bo_copy(struct vmw_bo *dst, u32 dst_offset, container_of(dst->tbo.bdev, struct vmw_private, bdev); size_t dst_size = dst->tbo.resource->size; size_t src_size = src->tbo.resource->size; + size_t dst_end, src_end; struct iosys_map dst_map = {0}; struct iosys_map src_map = {0}; + bool dst_mapped = false; + bool src_mapped = false; int ret, i; int x_in_bytes; u8 *vsrc; u8 *vdst; + if (!height || !width_in_bytes) + return 0; + + if (!dst_stride || !src_stride) + return -EINVAL; + if (dst_stride < width_in_bytes || src_stride < width_in_bytes) + return -EINVAL; + if (check_mul_overflow((size_t)dst_stride, (size_t)height - 1, &dst_end) || + check_add_overflow(dst_end, (size_t)width_in_bytes, &dst_end) || + check_add_overflow((size_t)dst_offset, dst_end, &dst_end) || + dst_end > dst_size || + check_mul_overflow((size_t)src_stride, (size_t)height - 1, &src_end) || + check_add_overflow(src_end, (size_t)width_in_bytes, &src_end) || + check_add_overflow((size_t)src_offset, src_end, &src_end) || + src_end > src_size) { + drm_dbg_driver(&vmw->drm, "Out-of-bounds external BO copy\n"); + return -EINVAL; + } + vsrc = map_external(src, &src_map); if (!vsrc) { drm_dbg_driver(&vmw->drm, "Wasn't able to map src\n"); ret = -ENOMEM; goto out; } + src_mapped = true; vdst = map_external(dst, &dst_map); if (!vdst) { @@ -483,16 +507,13 @@ static int vmw_external_bo_copy(struct vmw_bo *dst, u32 dst_offset, ret = -ENOMEM; goto out; } + dst_mapped = true; vsrc += src_offset; vdst += dst_offset; - if (src_stride == dst_stride) { - dst_size -= dst_offset; - src_size -= src_offset; - memcpy(vdst, vsrc, - min(dst_stride * height, min(dst_size, src_size))); + if (src_stride == dst_stride && width_in_bytes == dst_stride) { + memcpy(vdst, vsrc, dst_stride * (size_t)height); } else { - WARN_ON(dst_stride < width_in_bytes); for (i = 0; i < height; ++i) { memcpy(vdst, vsrc, width_in_bytes); vsrc += src_stride; @@ -508,8 +529,10 @@ static int vmw_external_bo_copy(struct vmw_bo *dst, u32 dst_offset, ret = 0; out: - unmap_external(src, &src_map); - unmap_external(dst, &dst_map); + if (src_mapped) + unmap_external(src, &src_map); + if (dst_mapped) + unmap_external(dst, &dst_map); return ret; } -- cgit v1.2.3 From e65848e4ce352bac9e3465099354c8b8f845391f Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sun, 26 Jul 2026 09:50:25 -0500 Subject: ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev() ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into ub->dev_info and then fixes up the fields the driver owns, but misses ->state and ->ublksrv_pid. A device added with ->state = UBLK_S_DEV_LIVE passes the "->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A poisoned ->state also gets START_USER_RECOVERY and the char device read/write path onto a device that was never started, and wedges START_DEV at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an unrelated task as the ublk server. Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only ever reads these back, so correcting them silently breaks nothing. ADD_DEV has copied ->state in unsanitized since ublk was merged, but back then it was harmless: the gendisk was allocated during ADD_DEV, and both teardown and the START_DEV -EEXIST check keyed off disk_live() rather than ->state. The oops became reachable once the disk allocation moved to START_DEV and those checks switched to ->state. Fixes: 6d9e6dfdf3b2 ("ublk: defer disk allocation") Cc: stable@vger.kernel.org Signed-off-by: Ming Lei Reviewed-by: Caleb Sander Mateos Link: https://patch.msgid.link/20260726145025.1507383-1-tom.leiming@gmail.com Signed-off-by: Jens Axboe --- drivers/block/ublk_drv.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c index 4ca6ec738c93..2a22f9dc1f2f 100644 --- a/drivers/block/ublk_drv.c +++ b/drivers/block/ublk_drv.c @@ -4764,6 +4764,15 @@ static int ublk_ctrl_add_dev(const struct ublksrv_ctrl_cmd *header) /* update device id */ ub->dev_info.dev_id = ub->ub_number; + /* + * ->state and ->ublksrv_pid are owned by the driver and only read back + * by userspace, but they come from the copied-in dev_info, so reset + * them. Otherwise a device added with ->state != DEAD looks live while + * ->ub_disk is still NULL. + */ + ub->dev_info.state = UBLK_S_DEV_DEAD; + ub->dev_info.ublksrv_pid = -1; + /* * 64bit flags will be copied back to userspace as feature * negotiation result, so have to clear flags which driver -- cgit v1.2.3 From 4ecef577d1ceddaa906720c71c06672433aba318 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 Jul 2026 15:36:30 +0100 Subject: ASoC: SDCA: Rename sdca_irq_allocate() to include devm Make it more clear sdca_irq_allocate() uses devm allocations by adding it into the name. Signed-off-by: Charles Keepax Link: https://patch.msgid.link/20260721143636.361814-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- include/sound/sdca_interrupts.h | 5 +++-- sound/soc/sdca/sdca_class.c | 4 ++-- sound/soc/sdca/sdca_interrupts.c | 8 ++++---- 3 files changed, 9 insertions(+), 8 deletions(-) diff --git a/include/sound/sdca_interrupts.h b/include/sound/sdca_interrupts.h index a515cc3df097..28fd44eb9334 100644 --- a/include/sound/sdca_interrupts.h +++ b/include/sound/sdca_interrupts.h @@ -86,8 +86,9 @@ int sdca_irq_populate(struct sdca_function_data *function, void sdca_irq_cleanup(struct device *dev, struct sdca_function_data *function, struct sdca_interrupt_info *info); -struct sdca_interrupt_info *sdca_irq_allocate(struct device *dev, - struct regmap *regmap, int irq); + +struct sdca_interrupt_info *devm_sdca_irq_allocate(struct device *dev, + struct regmap *regmap, int irq); void sdca_irq_enable_early(struct sdca_function_data *function, struct sdca_interrupt_info *info); diff --git a/sound/soc/sdca/sdca_class.c b/sound/soc/sdca/sdca_class.c index 8d7b007a068f..d7444f442c71 100644 --- a/sound/soc/sdca/sdca_class.c +++ b/sound/soc/sdca/sdca_class.c @@ -111,8 +111,8 @@ static void class_boot_work(struct work_struct *work) regcache_cache_only(drv->dev_regmap, false); - drv->irq_info = sdca_irq_allocate(drv->dev, drv->dev_regmap, - drv->sdw->irq); + drv->irq_info = devm_sdca_irq_allocate(drv->dev, drv->dev_regmap, + drv->sdw->irq); if (IS_ERR(drv->irq_info)) goto err; diff --git a/sound/soc/sdca/sdca_interrupts.c b/sound/soc/sdca/sdca_interrupts.c index 4539a52a8e32..1e4efc0609d9 100644 --- a/sound/soc/sdca/sdca_interrupts.c +++ b/sound/soc/sdca/sdca_interrupts.c @@ -592,7 +592,7 @@ void sdca_irq_cleanup(struct device *dev, EXPORT_SYMBOL_NS_GPL(sdca_irq_cleanup, "SND_SOC_SDCA"); /** - * sdca_irq_allocate - allocate an SDCA interrupt structure for a device + * devm_sdca_irq_allocate - allocate an SDCA interrupt structure for a device * @sdev: Device pointer against which things should be allocated. * @regmap: regmap to be used for accessing the SDCA IRQ registers. * @irq: The interrupt number. @@ -604,8 +604,8 @@ EXPORT_SYMBOL_NS_GPL(sdca_irq_cleanup, "SND_SOC_SDCA"); * Return: A pointer to the allocated sdca_interrupt_info struct, or an * error code. */ -struct sdca_interrupt_info *sdca_irq_allocate(struct device *sdev, - struct regmap *regmap, int irq) +struct sdca_interrupt_info *devm_sdca_irq_allocate(struct device *sdev, + struct regmap *regmap, int irq) { struct sdca_interrupt_info *info; int ret, i; @@ -634,7 +634,7 @@ struct sdca_interrupt_info *sdca_irq_allocate(struct device *sdev, return info; } -EXPORT_SYMBOL_NS_GPL(sdca_irq_allocate, "SND_SOC_SDCA"); +EXPORT_SYMBOL_NS_GPL(devm_sdca_irq_allocate, "SND_SOC_SDCA"); static void irq_enable_flags(struct sdca_function_data *function, struct sdca_interrupt_info *info, bool early) -- cgit v1.2.3 From f18e97fa7f125e0e7da130b4d0ff1edd48d7510a Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 Jul 2026 15:36:31 +0100 Subject: ASoC: SDCA: Add sdca_irq_cleanup_late() The SDCA IRQs are split into two groups, those registered at bus probe time (basically just FDL) and those registered at component time. There currently exists only a single cleanup function, if the FDL IRQ is freed at component time, then nothing would re-register it if the component is probed again. But the IRQs depending on a component need to be freed if the card is destroyed so they can't use stale components. Split the clean up into two functions one for the component level and one for the bus level. Signed-off-by: Charles Keepax Link: https://patch.msgid.link/20260721143636.361814-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- include/sound/sdca_interrupts.h | 5 ++++ sound/soc/sdca/sdca_class_function.c | 2 +- sound/soc/sdca/sdca_interrupts.c | 53 ++++++++++++++++++++++++++++-------- 3 files changed, 48 insertions(+), 12 deletions(-) diff --git a/include/sound/sdca_interrupts.h b/include/sound/sdca_interrupts.h index 28fd44eb9334..38c6c58c2cc7 100644 --- a/include/sound/sdca_interrupts.h +++ b/include/sound/sdca_interrupts.h @@ -33,6 +33,7 @@ struct sdca_function_data; * @priv: Pointer to private data for use by the handler. * @irq: IRQ number allocated to this interrupt, also used internally to track * the IRQ being assigned. + * @early_request: Flag to indicate this IRQ was requested at bus probe time. */ struct sdca_interrupt { const char *name; @@ -48,6 +49,7 @@ struct sdca_interrupt { void *priv; int irq; + bool early_request; }; /** @@ -86,6 +88,9 @@ int sdca_irq_populate(struct sdca_function_data *function, void sdca_irq_cleanup(struct device *dev, struct sdca_function_data *function, struct sdca_interrupt_info *info); +void sdca_irq_cleanup_late(struct device *dev, + struct sdca_function_data *function, + struct sdca_interrupt_info *info); struct sdca_interrupt_info *devm_sdca_irq_allocate(struct device *dev, struct regmap *regmap, int irq); diff --git a/sound/soc/sdca/sdca_class_function.c b/sound/soc/sdca/sdca_class_function.c index 1496a15f7d2a..5ae6c727c796 100644 --- a/sound/soc/sdca/sdca_class_function.c +++ b/sound/soc/sdca/sdca_class_function.c @@ -408,7 +408,7 @@ static void class_function_remove(struct auxiliary_device *auxdev) { struct class_function_drv *drv = auxiliary_get_drvdata(auxdev); - sdca_irq_cleanup(drv->dev, drv->function, drv->core->irq_info); + sdca_irq_cleanup_late(drv->dev, drv->function, drv->core->irq_info); } static int class_function_runtime_suspend(struct device *dev) diff --git a/sound/soc/sdca/sdca_interrupts.c b/sound/soc/sdca/sdca_interrupts.c index 1e4efc0609d9..d86884a89c40 100644 --- a/sound/soc/sdca/sdca_interrupts.c +++ b/sound/soc/sdca/sdca_interrupts.c @@ -456,6 +456,8 @@ int sdca_irq_populate_early(struct device *dev, struct regmap *regmap, if (ret) return ret; + interrupt->early_request = true; + ret = sdca_fdl_alloc_state(interrupt); if (ret) return ret; @@ -562,17 +564,10 @@ int sdca_irq_populate(struct sdca_function_data *function, } EXPORT_SYMBOL_NS_GPL(sdca_irq_populate, "SND_SOC_SDCA"); -/** - * sdca_irq_cleanup - Free all the individual IRQs for an SDCA Function - * @dev: Device pointer against which the sdca_interrupt_info was allocated. - * @function: Pointer to the SDCA Function. - * @info: Pointer to the SDCA interrupt info for this device. - * - * Typically this would be called from the driver for a single SDCA Function. - */ -void sdca_irq_cleanup(struct device *dev, - struct sdca_function_data *function, - struct sdca_interrupt_info *info) +static void sdca_irq_cleanup_flags(struct device *dev, + struct sdca_function_data *function, + struct sdca_interrupt_info *info, + bool late_cleanup) { int i; @@ -584,13 +579,49 @@ void sdca_irq_cleanup(struct device *dev, if (interrupt->function != function || !interrupt->irq) continue; + if (interrupt->early_request && !late_cleanup) + continue; + sdca_irq_free_locked(dev, info, i, interrupt->name, interrupt); kfree(interrupt->name); } } + +/** + * sdca_irq_cleanup - Free the regular IRQs for an SDCA Function + * @dev: Device pointer against which the sdca_interrupt_info was allocated. + * @function: Pointer to the SDCA Function. + * @info: Pointer to the SDCA interrupt info for this device. + * + * Typically this would be called from the driver for a single SDCA Function + * from component remove. + */ +void sdca_irq_cleanup(struct device *dev, + struct sdca_function_data *function, + struct sdca_interrupt_info *info) +{ + sdca_irq_cleanup_flags(dev, function, info, false); +} EXPORT_SYMBOL_NS_GPL(sdca_irq_cleanup, "SND_SOC_SDCA"); +/** + * sdca_irq_cleanup_late - Free the early IRQs for an SDCA Function + * @dev: Device pointer against which the sdca_interrupt_info was allocated. + * @function: Pointer to the SDCA Function. + * @info: Pointer to the SDCA interrupt info for this device. + * + * Typically this would be called from the driver for a single SDCA Function + * from bus remove. + */ +void sdca_irq_cleanup_late(struct device *dev, + struct sdca_function_data *function, + struct sdca_interrupt_info *info) +{ + sdca_irq_cleanup_flags(dev, function, info, true); +} +EXPORT_SYMBOL_NS_GPL(sdca_irq_cleanup_late, "SND_SOC_SDCA"); + /** * devm_sdca_irq_allocate - allocate an SDCA interrupt structure for a device * @sdev: Device pointer against which things should be allocated. -- cgit v1.2.3 From 0880082c27b6251cc3fea307dffa6899ad163e8b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 Jul 2026 15:36:32 +0100 Subject: ASoC: SDCA: Remove devm from primary IRQ cleanup To provide greater flexibility on when the IRQs are requested for client drivers don't use devm for the primary IRQ request/cleanup helper functions. Signed-off-by: Charles Keepax Link: https://patch.msgid.link/20260721143636.361814-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- include/sound/sdca_fdl.h | 2 ++ include/sound/sdca_interrupts.h | 2 ++ include/sound/sdca_jack.h | 2 ++ sound/soc/sdca/sdca_fdl.c | 13 +++++++++++-- sound/soc/sdca/sdca_interrupts.c | 8 ++++++++ sound/soc/sdca/sdca_jack.c | 13 +++++++++++-- 6 files changed, 36 insertions(+), 4 deletions(-) diff --git a/include/sound/sdca_fdl.h b/include/sound/sdca_fdl.h index fbaf4b384c8a..dc33927b82bd 100644 --- a/include/sound/sdca_fdl.h +++ b/include/sound/sdca_fdl.h @@ -67,6 +67,8 @@ struct fdl_state { #if IS_ENABLED(CONFIG_SND_SOC_SDCA_FDL) int sdca_fdl_alloc_state(struct sdca_interrupt *interrupt); +void sdca_fdl_free_state(struct sdca_interrupt *interrupt); + int sdca_fdl_process(struct sdca_interrupt *interrupt); int sdca_fdl_sync(struct device *dev, struct sdca_function_data *function, struct sdca_interrupt_info *info); diff --git a/include/sound/sdca_interrupts.h b/include/sound/sdca_interrupts.h index 38c6c58c2cc7..8a44c19e917c 100644 --- a/include/sound/sdca_interrupts.h +++ b/include/sound/sdca_interrupts.h @@ -31,6 +31,7 @@ struct sdca_function_data; * @entity: Pointer to the Entity that the interrupt is associated with. * @control: Pointer to the Control that the interrupt is associated with. * @priv: Pointer to private data for use by the handler. + * @free_priv: Pointer to a function that can be used to free the priv data. * @irq: IRQ number allocated to this interrupt, also used internally to track * the IRQ being assigned. * @early_request: Flag to indicate this IRQ was requested at bus probe time. @@ -47,6 +48,7 @@ struct sdca_interrupt { struct sdca_control *control; void *priv; + void (*free_priv)(struct sdca_interrupt *interrupt); int irq; bool early_request; diff --git a/include/sound/sdca_jack.h b/include/sound/sdca_jack.h index 181541f0f4d8..59de40b7d7d0 100644 --- a/include/sound/sdca_jack.h +++ b/include/sound/sdca_jack.h @@ -28,6 +28,8 @@ struct jack_state { }; int sdca_jack_alloc_state(struct sdca_interrupt *interrupt); +void sdca_jack_free_state(struct sdca_interrupt *interrupt); + int sdca_jack_process(struct sdca_interrupt *interrupt); int sdca_jack_set_jack(struct sdca_interrupt_info *info, struct snd_soc_jack *jack); int sdca_jack_report(struct sdca_interrupt *interrupt); diff --git a/sound/soc/sdca/sdca_fdl.c b/sound/soc/sdca/sdca_fdl.c index 994821a6df61..82e09d960c12 100644 --- a/sound/soc/sdca/sdca_fdl.c +++ b/sound/soc/sdca/sdca_fdl.c @@ -481,10 +481,9 @@ EXPORT_SYMBOL_NS_GPL(sdca_fdl_process, "SND_SOC_SDCA"); */ int sdca_fdl_alloc_state(struct sdca_interrupt *interrupt) { - struct device *dev = interrupt->dev; struct fdl_state *fdl_state; - fdl_state = devm_kzalloc(dev, sizeof(*fdl_state), GFP_KERNEL); + fdl_state = kzalloc_obj(*fdl_state); if (!fdl_state) return -ENOMEM; @@ -499,3 +498,13 @@ int sdca_fdl_alloc_state(struct sdca_interrupt *interrupt) return 0; } EXPORT_SYMBOL_NS_GPL(sdca_fdl_alloc_state, "SND_SOC_SDCA"); + +/** + * sdca_fdl_free_state - free state for an FDL interrupt + * @interrupt: SDCA interrupt structure. + */ +void sdca_fdl_free_state(struct sdca_interrupt *interrupt) +{ + kfree(interrupt->priv); +} +EXPORT_SYMBOL_NS_GPL(sdca_fdl_free_state, "SND_SOC_SDCA"); diff --git a/sound/soc/sdca/sdca_interrupts.c b/sound/soc/sdca/sdca_interrupts.c index d86884a89c40..cd2c5d49bb95 100644 --- a/sound/soc/sdca/sdca_interrupts.c +++ b/sound/soc/sdca/sdca_interrupts.c @@ -457,6 +457,7 @@ int sdca_irq_populate_early(struct device *dev, struct regmap *regmap, return ret; interrupt->early_request = true; + interrupt->free_priv = sdca_fdl_free_state; ret = sdca_fdl_alloc_state(interrupt); if (ret) @@ -530,6 +531,8 @@ int sdca_irq_populate(struct sdca_function_data *function, handler = function_status_handler; break; case SDCA_CTL_TYPE_S(GE, DETECTED_MODE): + interrupt->free_priv = sdca_jack_free_state; + ret = sdca_jack_alloc_state(interrupt); if (ret) return ret; @@ -537,6 +540,8 @@ int sdca_irq_populate(struct sdca_function_data *function, handler = detected_mode_handler; break; case SDCA_CTL_TYPE_S(XU, FDL_CURRENTOWNER): + interrupt->free_priv = sdca_fdl_free_state; + ret = sdca_fdl_alloc_state(interrupt); if (ret) return ret; @@ -584,6 +589,9 @@ static void sdca_irq_cleanup_flags(struct device *dev, sdca_irq_free_locked(dev, info, i, interrupt->name, interrupt); + if (interrupt->free_priv) + interrupt->free_priv(interrupt); + kfree(interrupt->name); } } diff --git a/sound/soc/sdca/sdca_jack.c b/sound/soc/sdca/sdca_jack.c index ae9636622a84..ffa870964924 100644 --- a/sound/soc/sdca/sdca_jack.c +++ b/sound/soc/sdca/sdca_jack.c @@ -132,10 +132,9 @@ EXPORT_SYMBOL_NS_GPL(sdca_jack_process, "SND_SOC_SDCA"); */ int sdca_jack_alloc_state(struct sdca_interrupt *interrupt) { - struct device *dev = interrupt->dev; struct jack_state *jack_state; - jack_state = devm_kzalloc(dev, sizeof(*jack_state), GFP_KERNEL); + jack_state = kzalloc_obj(*jack_state); if (!jack_state) return -ENOMEM; @@ -145,6 +144,16 @@ int sdca_jack_alloc_state(struct sdca_interrupt *interrupt) } EXPORT_SYMBOL_NS_GPL(sdca_jack_alloc_state, "SND_SOC_SDCA"); +/** + * sdca_jack_free_state - free state for a jack interrupt + * @interrupt: SDCA interrupt structure. + */ +void sdca_jack_free_state(struct sdca_interrupt *interrupt) +{ + kfree(interrupt->priv); +} +EXPORT_SYMBOL_NS_GPL(sdca_jack_free_state, "SND_SOC_SDCA"); + static int type_get_mask(enum sdca_terminal_type type) { switch (type) { -- cgit v1.2.3 From 050406cbd676615ba71081bce69df710754d27e4 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 Jul 2026 15:36:33 +0100 Subject: ASoC: SDCA: Populate IRQ data earlier Currently, the IRQ data (attached Entity/Control/etc) is populated as the IRQ is requested. However, this can cause issues as occasionally the setup process wants to access specifics of an IRQ before the IRQ is actually enabled. To facilitate this cache all the IRQ data during sdca_irq_populate_early() and make sdca_irq_populate() simply request the outstanding IRQs. This also has the advantage that sdca_irq_populate() can now just iterate through the IRQ array which is much smaller/faster than going through every Entity in the Function for Controls. Signed-off-by: Charles Keepax Link: https://patch.msgid.link/20260721143636.361814-5-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- include/sound/sdca_interrupts.h | 2 + sound/soc/sdca/sdca_interrupts.c | 115 +++++++++++++++------------------------ 2 files changed, 47 insertions(+), 70 deletions(-) diff --git a/include/sound/sdca_interrupts.h b/include/sound/sdca_interrupts.h index 8a44c19e917c..3b30146e21db 100644 --- a/include/sound/sdca_interrupts.h +++ b/include/sound/sdca_interrupts.h @@ -30,6 +30,7 @@ struct sdca_function_data; * @function: Pointer to the Function that the interrupt is associated with. * @entity: Pointer to the Entity that the interrupt is associated with. * @control: Pointer to the Control that the interrupt is associated with. + * @handler: Handler function to be called for the IRQ. * @priv: Pointer to private data for use by the handler. * @free_priv: Pointer to a function that can be used to free the priv data. * @irq: IRQ number allocated to this interrupt, also used internally to track @@ -46,6 +47,7 @@ struct sdca_interrupt { struct sdca_function_data *function; struct sdca_entity *entity; struct sdca_control *control; + irq_handler_t handler; void *priv; void (*free_priv)(struct sdca_interrupt *interrupt); diff --git a/sound/soc/sdca/sdca_interrupts.c b/sound/soc/sdca/sdca_interrupts.c index cd2c5d49bb95..6f0d8c0fe622 100644 --- a/sound/soc/sdca/sdca_interrupts.c +++ b/sound/soc/sdca/sdca_interrupts.c @@ -421,7 +421,8 @@ static struct sdca_interrupt *get_interrupt_data(struct device *dev, int irq, * * This is intended to be used as part of the Function boot process. It * can be called before the soundcard is registered (ie. doesn't depend - * on component) and will register the FDL interrupts. + * on component) and will populate all the required IRQ data, as well as + * registering the FDL interrupts to start booting the device. * * Return: Zero on success, and a negative error code on failure. */ @@ -448,24 +449,36 @@ int sdca_irq_populate_early(struct device *dev, struct regmap *regmap, else if (!interrupt) continue; + ret = sdca_irq_data_populate(dev, regmap, NULL, function, + entity, control, interrupt); + if (ret) + return ret; + switch (SDCA_CTL_TYPE(entity->type, control->sel)) { - case SDCA_CTL_TYPE_S(XU, FDL_CURRENTOWNER): - ret = sdca_irq_data_populate(dev, regmap, NULL, - function, entity, - control, interrupt); + case SDCA_CTL_TYPE_S(ENTITY_0, FUNCTION_STATUS): + interrupt->handler = function_status_handler; + break; + case SDCA_CTL_TYPE_S(GE, DETECTED_MODE): + interrupt->handler = detected_mode_handler; + interrupt->free_priv = sdca_jack_free_state; + + ret = sdca_jack_alloc_state(interrupt); if (ret) return ret; - - interrupt->early_request = true; + break; + case SDCA_CTL_TYPE_S(XU, FDL_CURRENTOWNER): + interrupt->handler = fdl_owner_handler; interrupt->free_priv = sdca_fdl_free_state; ret = sdca_fdl_alloc_state(interrupt); if (ret) return ret; + interrupt->early_request = true; + ret = sdca_irq_request_locked(dev, info, irq, interrupt->name, - fdl_owner_handler, + interrupt->handler, interrupt); if (ret) { dev_err(dev, "failed to request irq %s: %d\n", @@ -473,7 +486,11 @@ int sdca_irq_populate_early(struct device *dev, struct regmap *regmap, return ret; } break; + case SDCA_CTL_TYPE_S(HIDE, HIDTX_CURRENTOWNER): + interrupt->handler = hid_handler; + break; default: + interrupt->handler = base_handler; break; } } @@ -498,70 +515,26 @@ int sdca_irq_populate(struct sdca_function_data *function, struct sdca_interrupt_info *info) { struct device *dev = component->dev; - int i, j; + int i, ret; guard(mutex)(&info->irq_lock); - for (i = 0; i < function->num_entities; i++) { - struct sdca_entity *entity = &function->entities[i]; - - for (j = 0; j < entity->num_controls; j++) { - struct sdca_control *control = &entity->controls[j]; - int irq = control->interrupt_position; - struct sdca_interrupt *interrupt; - irq_handler_t handler; - int ret; - - interrupt = get_interrupt_data(dev, irq, info); - if (IS_ERR(interrupt)) - return PTR_ERR(interrupt); - else if (!interrupt) - continue; - - ret = sdca_irq_data_populate(dev, NULL, component, - function, entity, control, - interrupt); - if (ret) - return ret; - - handler = base_handler; - - switch (SDCA_CTL_TYPE(entity->type, control->sel)) { - case SDCA_CTL_TYPE_S(ENTITY_0, FUNCTION_STATUS): - handler = function_status_handler; - break; - case SDCA_CTL_TYPE_S(GE, DETECTED_MODE): - interrupt->free_priv = sdca_jack_free_state; - - ret = sdca_jack_alloc_state(interrupt); - if (ret) - return ret; - - handler = detected_mode_handler; - break; - case SDCA_CTL_TYPE_S(XU, FDL_CURRENTOWNER): - interrupt->free_priv = sdca_fdl_free_state; + for (i = 0; i < SDCA_MAX_INTERRUPTS; i++) { + struct sdca_interrupt *interrupt = &info->irqs[i]; + int irq; - ret = sdca_fdl_alloc_state(interrupt); - if (ret) - return ret; + if (interrupt->function != function || interrupt->irq) + continue; - handler = fdl_owner_handler; - break; - case SDCA_CTL_TYPE_S(HIDE, HIDTX_CURRENTOWNER): - handler = hid_handler; - break; - default: - break; - } + interrupt->component = component; - ret = sdca_irq_request_locked(dev, info, irq, interrupt->name, - handler, interrupt); - if (ret) { - dev_err(dev, "failed to request irq %s: %d\n", - interrupt->name, ret); - return ret; - } + irq = interrupt->control->interrupt_position; + ret = sdca_irq_request_locked(dev, info, irq, interrupt->name, + interrupt->handler, interrupt); + if (ret) { + dev_err(dev, "failed to request irq %s: %d\n", + interrupt->name, ret); + return ret; } } @@ -581,13 +554,15 @@ static void sdca_irq_cleanup_flags(struct device *dev, for (i = 0; i < SDCA_MAX_INTERRUPTS; i++) { struct sdca_interrupt *interrupt = &info->irqs[i]; - if (interrupt->function != function || !interrupt->irq) + if (interrupt->function != function || + (interrupt->early_request && !late_cleanup)) continue; - if (interrupt->early_request && !late_cleanup) - continue; + if (interrupt->irq) + sdca_irq_free_locked(dev, info, i, interrupt->name, interrupt); - sdca_irq_free_locked(dev, info, i, interrupt->name, interrupt); + if (!late_cleanup) + continue; if (interrupt->free_priv) interrupt->free_priv(interrupt); -- cgit v1.2.3 From 3e81e2fb216327a73510a7aa5318023c379d479a Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 Jul 2026 15:36:34 +0100 Subject: ASoC: Add a component fixup_controls callback A card level fixup_controls callback was added in: commit df4d27b19b89 ("ASoC: Introduce 'fixup_controls' card method") This allowed the machine driver to take actions after all the card controls have been added. However, there are times when a codec driver would also want to do things like obtain references to controls for later use, which require all the controls to be present. Add a component level fixup_controls callback, echoing the card level option. Signed-off-by: Charles Keepax Link: https://patch.msgid.link/20260721143636.361814-6-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- include/sound/soc-component.h | 2 ++ sound/soc/soc-component.c | 10 ++++++++++ sound/soc/soc-core.c | 5 +++++ 3 files changed, 17 insertions(+) diff --git a/include/sound/soc-component.h b/include/sound/soc-component.h index aa423865dbe7..4b7d7954953d 100644 --- a/include/sound/soc-component.h +++ b/include/sound/soc-component.h @@ -78,6 +78,7 @@ struct snd_soc_component_driver { unsigned int num_dapm_routes; int (*probe)(struct snd_soc_component *component); + int (*fixup_controls)(struct snd_soc_component *component); void (*remove)(struct snd_soc_component *component); int (*suspend)(struct snd_soc_component *component); int (*resume)(struct snd_soc_component *component); @@ -380,6 +381,7 @@ void snd_soc_component_suspend(struct snd_soc_component *component); void snd_soc_component_resume(struct snd_soc_component *component); int snd_soc_component_is_suspended(struct snd_soc_component *component); int snd_soc_component_probe(struct snd_soc_component *component); +int snd_soc_component_fixup_controls(struct snd_soc_component *component); void snd_soc_component_remove(struct snd_soc_component *component); int snd_soc_component_of_xlate_dai_id(struct snd_soc_component *component, struct device_node *ep); diff --git a/sound/soc/soc-component.c b/sound/soc/soc-component.c index 21492d15833f..2ce24513fac5 100644 --- a/sound/soc/soc-component.c +++ b/sound/soc/soc-component.c @@ -310,6 +310,16 @@ int snd_soc_component_probe(struct snd_soc_component *component) return soc_component_ret(component, ret); } +int snd_soc_component_fixup_controls(struct snd_soc_component *component) +{ + int ret = 0; + + if (component->driver->fixup_controls) + ret = component->driver->fixup_controls(component); + + return soc_component_ret(component, ret); +} + void snd_soc_component_remove(struct snd_soc_component *component) { if (component->driver->remove) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 7817beea5b3b..44f9bb4473f5 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2162,6 +2162,11 @@ static int snd_soc_bind_card(struct snd_soc_card *card) goto probe_end; snd_soc_dapm_new_widgets(card); + for_each_card_components(card, component) { + ret = snd_soc_component_fixup_controls(component); + if (ret < 0) + goto probe_end; + } snd_soc_card_fixup_controls(card); ret = snd_card_register(card->snd_card); -- cgit v1.2.3 From b8f71f16134fadc287fbb14be2a42b707efb7a30 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 Jul 2026 15:36:35 +0100 Subject: ASoC: SDCA: Switch to fixup_controls callback for IRQ registration Currently there are some race conditions around the boot of SDCA jack detection. The core creates DAPM widgets/routes quite a long time before it creates the associated ALSA control, and the jack detection IRQ is currently registered in component probe. At the time of component probe, the DAPM widgets exist, shortly after this the DAPM routes are added. At the time the DAPM routes are added the register value for the control is checked and the appropriate path is connected. The existing handling in the SDCA jack IRQ handles the case the control doesn't exist and updates the registers directly, which works until the DAPM routes are added. After the routes are added the DAPM graph has already set connected on a particular DAPM path, which will not be updated until an IRQ is received when the control is present. Thus those updates are usually not reflected in the resulting DAPM graph which can lead to the audio path being erroneously powered on/off. Switch to the new fixup_controls callback to register the IRQs, this is guaranteed to run after all the controls have been created. Which means we can avoid the aforementioned race condition and as a bonus no longer need to concern ourselves with a case where the IRQ handler runs and the ALSA control is unavailable. Signed-off-by: Charles Keepax Link: https://patch.msgid.link/20260721143636.361814-7-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/sdca/sdca_class_function.c | 4 ++-- sound/soc/sdca/sdca_jack.c | 44 ++++++++++++++++-------------------- 2 files changed, 21 insertions(+), 27 deletions(-) diff --git a/sound/soc/sdca/sdca_class_function.c b/sound/soc/sdca/sdca_class_function.c index 5ae6c727c796..2fb2b043c979 100644 --- a/sound/soc/sdca/sdca_class_function.c +++ b/sound/soc/sdca/sdca_class_function.c @@ -191,7 +191,7 @@ static const struct snd_soc_dai_ops class_function_sdw_ops = { .hw_free = class_function_sdw_remove_peripheral, }; -static int class_function_component_probe(struct snd_soc_component *component) +static int class_function_component_fixup_controls(struct snd_soc_component *component) { struct class_function_drv *drv = snd_soc_component_get_drvdata(component); struct sdca_class_drv *core = drv->core; @@ -217,7 +217,7 @@ static int class_function_set_jack(struct snd_soc_component *component, } static const struct snd_soc_component_driver class_function_component_drv = { - .probe = class_function_component_probe, + .fixup_controls = class_function_component_fixup_controls, .remove = class_function_component_remove, .endianness = 1, }; diff --git a/sound/soc/sdca/sdca_jack.c b/sound/soc/sdca/sdca_jack.c index ffa870964924..3c84d17244a2 100644 --- a/sound/soc/sdca/sdca_jack.c +++ b/sound/soc/sdca/sdca_jack.c @@ -41,6 +41,7 @@ int sdca_jack_process(struct sdca_interrupt *interrupt) struct jack_state *state = interrupt->priv; struct snd_kcontrol *kctl = state->kctl; struct snd_ctl_elem_value *ucontrol __free(kfree) = NULL; + struct soc_enum *soc_enum; unsigned int reg, val; int ret; @@ -55,10 +56,12 @@ int sdca_jack_process(struct sdca_interrupt *interrupt) return -ENOMEM; kctl = snd_soc_component_get_kcontrol(component, name); - if (!kctl) - dev_dbg(dev, "control not found: %s\n", name); - else - state->kctl = kctl; + if (!kctl) { + dev_err(dev, "control not found: %s\n", name); + return -ENODEV; + } + + state->kctl = kctl; } reg = SDW_SDCA_CTL(interrupt->function->desc->adr, interrupt->entity->id, @@ -96,30 +99,21 @@ int sdca_jack_process(struct sdca_interrupt *interrupt) dev_dbg(dev, "%s: %#x\n", interrupt->name, val); - if (kctl) { - struct soc_enum *soc_enum = (struct soc_enum *)kctl->private_value; - - ucontrol = kzalloc_obj(*ucontrol); - if (!ucontrol) - return -ENOMEM; - - ucontrol->value.enumerated.item[0] = snd_soc_enum_val_to_item(soc_enum, val); + ucontrol = kzalloc_obj(*ucontrol); + if (!ucontrol) + return -ENOMEM; - ret = snd_soc_dapm_put_enum_double(kctl, ucontrol); - if (ret < 0) { - dev_err(dev, "failed to update selected mode: %d\n", ret); - return ret; - } + soc_enum = (struct soc_enum *)kctl->private_value; + ucontrol->value.enumerated.item[0] = snd_soc_enum_val_to_item(soc_enum, val); - snd_ctl_notify(card->snd_card, SNDRV_CTL_EVENT_MASK_VALUE, &kctl->id); - } else { - ret = regmap_write(interrupt->function_regmap, reg, val); - if (ret) { - dev_err(dev, "failed to write selected mode: %d\n", ret); - return ret; - } + ret = snd_soc_dapm_put_enum_double(kctl, ucontrol); + if (ret < 0) { + dev_err(dev, "failed to update selected mode: %d\n", ret); + return ret; } + snd_ctl_notify(card->snd_card, SNDRV_CTL_EVENT_MASK_VALUE, &kctl->id); + return sdca_jack_report(interrupt); } EXPORT_SYMBOL_NS_GPL(sdca_jack_process, "SND_SOC_SDCA"); @@ -201,7 +195,7 @@ int sdca_jack_set_jack(struct sdca_interrupt_info *info, struct snd_soc_jack *ja struct sdca_control_range *range; struct jack_state *jack_state; - if (!interrupt->irq) + if (!interrupt->dev) continue; switch (SDCA_CTL_TYPE(entity->type, control->sel)) { -- cgit v1.2.3 From bf1b7821f85383a8804441f8fd5165be148f3ec8 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 Jul 2026 15:36:36 +0100 Subject: ASoC: SDCA: Move kcontrol search out of IRQ Now that the IRQs are always registered after all the ALSA controls are created it is possible to search for the control at the point the IRQ is requested. Move the control search out of the IRQ handler and do it at IRQ request time. This also fixes a potential issue when the card was torn down and reprobed without destroying the codec device, the kctl pointer stored by the IRQ handler would not be updated to the new control on the second probe. Signed-off-by: Charles Keepax Link: https://patch.msgid.link/20260721143636.361814-8-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- include/sound/sdca_jack.h | 1 + sound/soc/sdca/sdca_interrupts.c | 12 +++++++++++ sound/soc/sdca/sdca_jack.c | 43 ++++++++++++++++++++++++---------------- 3 files changed, 39 insertions(+), 17 deletions(-) diff --git a/include/sound/sdca_jack.h b/include/sound/sdca_jack.h index 59de40b7d7d0..871ba2d8146a 100644 --- a/include/sound/sdca_jack.h +++ b/include/sound/sdca_jack.h @@ -28,6 +28,7 @@ struct jack_state { }; int sdca_jack_alloc_state(struct sdca_interrupt *interrupt); +int sdca_jack_init_state(struct sdca_interrupt *interrupt); void sdca_jack_free_state(struct sdca_interrupt *interrupt); int sdca_jack_process(struct sdca_interrupt *interrupt); diff --git a/sound/soc/sdca/sdca_interrupts.c b/sound/soc/sdca/sdca_interrupts.c index 6f0d8c0fe622..42fbd3af8a75 100644 --- a/sound/soc/sdca/sdca_interrupts.c +++ b/sound/soc/sdca/sdca_interrupts.c @@ -521,6 +521,8 @@ int sdca_irq_populate(struct sdca_function_data *function, for (i = 0; i < SDCA_MAX_INTERRUPTS; i++) { struct sdca_interrupt *interrupt = &info->irqs[i]; + struct sdca_control *control = interrupt->control; + struct sdca_entity *entity = interrupt->entity; int irq; if (interrupt->function != function || interrupt->irq) @@ -528,6 +530,16 @@ int sdca_irq_populate(struct sdca_function_data *function, interrupt->component = component; + switch (SDCA_CTL_TYPE(entity->type, control->sel)) { + case SDCA_CTL_TYPE_S(GE, DETECTED_MODE): + ret = sdca_jack_init_state(interrupt); + if (ret) + return ret; + break; + default: + break; + } + irq = interrupt->control->interrupt_position; ret = sdca_irq_request_locked(dev, info, irq, interrupt->name, interrupt->handler, interrupt); diff --git a/sound/soc/sdca/sdca_jack.c b/sound/soc/sdca/sdca_jack.c index 3c84d17244a2..73f8067906a9 100644 --- a/sound/soc/sdca/sdca_jack.c +++ b/sound/soc/sdca/sdca_jack.c @@ -47,23 +47,6 @@ int sdca_jack_process(struct sdca_interrupt *interrupt) guard(rwsem_write)(rwsem); - if (!kctl) { - const char *name __free(kfree) = kasprintf(GFP_KERNEL, "%s %s", - interrupt->entity->label, - SDCA_CTL_SELECTED_MODE_NAME); - - if (!name) - return -ENOMEM; - - kctl = snd_soc_component_get_kcontrol(component, name); - if (!kctl) { - dev_err(dev, "control not found: %s\n", name); - return -ENODEV; - } - - state->kctl = kctl; - } - reg = SDW_SDCA_CTL(interrupt->function->desc->adr, interrupt->entity->id, interrupt->control->sel, 0); @@ -148,6 +131,32 @@ void sdca_jack_free_state(struct sdca_interrupt *interrupt) } EXPORT_SYMBOL_NS_GPL(sdca_jack_free_state, "SND_SOC_SDCA"); +/** + * sdca_jack_init_state - Initialise transient state for a jack interrupt + * @interrupt: SDCA interrupt structure. + * + * Return: Zero on success or a negative error code. + */ +int sdca_jack_init_state(struct sdca_interrupt *interrupt) +{ + struct jack_state *jack_state = interrupt->priv; + const char *name __free(kfree) = kasprintf(GFP_KERNEL, "%s %s", + interrupt->entity->label, + SDCA_CTL_SELECTED_MODE_NAME); + + if (!name) + return -ENOMEM; + + jack_state->kctl = snd_soc_component_get_kcontrol(interrupt->component, name); + if (!jack_state->kctl) { + dev_err(interrupt->dev, "control not found: %s\n", name); + return -ENODEV; + } + + return 0; +} +EXPORT_SYMBOL_NS_GPL(sdca_jack_init_state, "SND_SOC_SDCA"); + static int type_get_mask(enum sdca_terminal_type type) { switch (type) { -- cgit v1.2.3 From dd88cf6273de61f2f7206c2066af97798dbb38b0 Mon Sep 17 00:00:00 2001 From: wangdicheng Date: Mon, 20 Jul 2026 16:16:16 +0800 Subject: ASoC: tas2781: Use correct calibration data for SINEGAIN2 register The SINEGAIN2_REG case in cali_reg_update() references t->sin_gn[] rather than t->sin_gn2[], causing the second pilot tone gain calibration to be programmed with the wrong register address. These are distinct fields in struct fct_param_address and are populated from separate firmware parameters by the parser in tas2781-fmwlib.c. Fixes: 84d6a465f211 ("ASoC: tas2781: Support dsp firmware Alpha and Beta seaies") Signed-off-by: wangdicheng Link: https://patch.msgid.link/20260720081616.631413-1-wangdich9700@163.com Signed-off-by: Mark Brown --- sound/soc/codecs/tas2781-i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9e6f0ad5f05d..209067e98e1f 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -1310,8 +1310,8 @@ static void cali_reg_update(struct bulk_reg_val *p, t->sin_gn[2]); break; case TAS2781_PRM_SINEGAIN2_REG: - reg = TASDEVICE_REG(t->sin_gn[0], t->sin_gn[1], - t->sin_gn[2]); + reg = TASDEVICE_REG(t->sin_gn2[0], t->sin_gn2[1], + t->sin_gn2[2]); break; default: reg = 0; -- cgit v1.2.3 From b0e8adb2ccb43009796897ced09f91636685c9d3 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 22 Jul 2026 07:14:36 -0700 Subject: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954 ... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220 ? __kasan_kmalloc.constprop.0+0xc9/0xd0 ? __kmalloc_node_track_caller+0x194/0x5b0 ? nct6775_probe+0x936/0x46f0 [nct6775] ? nct6775_probe+0x936/0x46f0 [nct6775] ... Fix the problem by hard-coding the number of temperature and temperature configuration registers to three for NCT6116. Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. Reported-by: Florian Bezdeka Closes: https://lore.kernel.org/linux-hwmon/57cfc3fa-d4e9-4c10-8aa7-4ad0af7ebebe@roeck-us.net/T/#t Fixes: 29c7cb485b32 ("hwmon: (nct6775) Integrate new model nct6116") Cc: Björn Gerhart Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775-core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/nct6775-core.c b/drivers/hwmon/nct6775-core.c index d668dc390def..51253acff4b0 100644 --- a/drivers/hwmon/nct6775-core.c +++ b/drivers/hwmon/nct6775-core.c @@ -846,8 +846,6 @@ static const u16 NCT6116_FAN_PULSE_SHIFT[] = { 0, 2, 4, 6, 6 }; static const u16 NCT6116_REG_PWM[] = { 0x119, 0x129, 0x139, 0x199, 0x1a9 }; static const u16 NCT6116_REG_FAN_MODE[] = { 0x113, 0x123, 0x133, 0x193, 0x1a3 }; static const u16 NCT6116_REG_TEMP_SEL[] = { 0x110, 0x120, 0x130, 0x190, 0x1a0 }; -static const u16 NCT6116_REG_TEMP_SOURCE[] = { - 0xb0, 0xb1, 0xb2 }; static const u16 NCT6116_REG_CRITICAL_TEMP[] = { 0x11a, 0x12a, 0x13a, 0x19a, 0x1aa }; @@ -3652,7 +3650,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, = NCT6106_CRITICAL_PWM_ENABLE_MASK; data->REG_CRITICAL_PWM = NCT6116_REG_CRITICAL_PWM; data->REG_TEMP_OFFSET = NCT6106_REG_TEMP_OFFSET; - data->REG_TEMP_SOURCE = NCT6116_REG_TEMP_SOURCE; + data->REG_TEMP_SOURCE = NCT6106_REG_TEMP_SOURCE; data->REG_TEMP_SEL = NCT6116_REG_TEMP_SEL; data->REG_WEIGHT_TEMP_SEL = NCT6106_REG_WEIGHT_TEMP_SEL; data->REG_WEIGHT_TEMP[0] = NCT6106_REG_WEIGHT_TEMP_STEP; @@ -3666,13 +3664,13 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, reg_temp = NCT6106_REG_TEMP; reg_temp_mon = NCT6106_REG_TEMP_MON; - num_reg_temp = ARRAY_SIZE(NCT6106_REG_TEMP); + num_reg_temp = 3; num_reg_temp_mon = ARRAY_SIZE(NCT6106_REG_TEMP_MON); num_reg_tsi_temp = ARRAY_SIZE(NCT6116_REG_TSI_TEMP); reg_temp_over = NCT6106_REG_TEMP_OVER; reg_temp_hyst = NCT6106_REG_TEMP_HYST; reg_temp_config = NCT6106_REG_TEMP_CONFIG; - num_reg_temp_config = ARRAY_SIZE(NCT6106_REG_TEMP_CONFIG); + num_reg_temp_config = 3; reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6106_REG_TEMP_CRIT; reg_temp_crit_l = NCT6106_REG_TEMP_CRIT_L; -- cgit v1.2.3 From a64a7e8a0b012ba81b0eadbd7afc84ab0dbfd70c Mon Sep 17 00:00:00 2001 From: Vincent Jardin Date: Thu, 23 Jul 2026 17:44:56 +0200 Subject: hwmon: (pmbus/core) notify on the hwmon device, not the i2c client pmbus_notify() calls sysfs_notify() and kobject_uevent() on the i2c client's kobject, but the alarm attributes live on the hwmon class device registered by pmbus_do_probe(). Notifying the parent i2c device is a no-op for both poll(POLLPRI) waiters and udev listeners: the named attribute does not exist on that kobject. Notify the hwmon device instead, so poll() wakes up and "change" uevents fire on the inX_alarm/tempX_alarm attributes when SMBALERT# reports a fault. Fixes: f469bde9afd1 ("hwmon: (pmbus/core) Notify hwmon events") Cc: stable@vger.kernel.org # v6.4+ Signed-off-by: Vincent Jardin Link: https://lore.kernel.org/r/20260723-fix_hwmon_notify_v1-v1-1-5a24c528686d@free.fr Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 3143b9e0316c..0081f16c3a95 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -2985,8 +2985,9 @@ static void pmbus_notify(struct pmbus_data *data, int page, int reg, int flags) if (reg == sreg && page == spage && (smask & flags)) { dev_dbg(data->dev, "sysfs notify: %s", da->attr.name); - sysfs_notify(&data->dev->kobj, NULL, da->attr.name); - kobject_uevent(&data->dev->kobj, KOBJ_CHANGE); + sysfs_notify(&data->hwmon_dev->kobj, NULL, + da->attr.name); + kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE); flags &= ~smask; } -- cgit v1.2.3 From e6c80061ca239f45c0eaf7e47a91d6d6df9bd636 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 10 Jun 2026 07:46:16 -0700 Subject: hwmon: (ina2xx) Fix various overflow issues Sashiko reports several integer overflow problems in the ina2xx driver caused by unbounded multiplications and inadequate types for intermediate calculations. Specifically: - In ina2xx_get_value(), the return type is changed from int to long. Intermediate calculations for current are now performed using 64-bit types to prevent 32-bit integer overflow before the division by 1000. - When calculating power in ina2xx_get_value() and sy24655_average_power_read(), interim values are cast to u64 and clamped to LONG_MAX. This prevents overflow when regval or accumulator_24 is multiplied by power_lsb_uW. - In ina226_alert_to_reg(), the clamping logic is rewritten using min_t(). This safely avoids integer overflows when scaling user-provided values for shunt voltage, bus voltage, power, and current limits. Cc: Loic Poulain Fixes: ab7fbee452be ("hwmon: (ina2xx) Fix various overflow issues") Signed-off-by: Guenter Roeck --- drivers/hwmon/ina2xx.c | 61 +++++++++++++++++++++++++++++--------------------- 1 file changed, 35 insertions(+), 26 deletions(-) diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index c4742e84b999..449a72c6b40b 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -266,30 +267,34 @@ static u16 ina226_interval_to_reg(long interval) return FIELD_PREP(INA226_AVG_RD_MASK, avg_bits); } -static int ina2xx_get_value(struct ina2xx_data *data, u8 reg, - unsigned int regval) +static long ina2xx_get_value(struct ina2xx_data *data, u8 reg, + unsigned int regval) { - int val; + s64 val64; + long val; switch (reg) { case INA2XX_SHUNT_VOLTAGE: /* signed register */ - val = (s16)regval >> data->config->shunt_voltage_shift; - val = DIV_ROUND_CLOSEST(val, data->config->shunt_div); + val = DIV_ROUND_CLOSEST((s16)regval >> data->config->shunt_voltage_shift, + data->config->shunt_div); break; case INA2XX_BUS_VOLTAGE: - val = (regval >> data->config->bus_voltage_shift) * - data->config->bus_voltage_lsb; - val = DIV_ROUND_CLOSEST(val, 1000); + val = DIV_ROUND_CLOSEST((regval >> data->config->bus_voltage_shift) * + data->config->bus_voltage_lsb, 1000); break; case INA2XX_POWER: - val = regval * data->power_lsb_uW; + val = min_t(u64, (u64)regval * data->power_lsb_uW, LONG_MAX); break; case INA2XX_CURRENT: /* signed register, result in mA */ - val = ((s16)regval >> data->config->current_shift) * + val64 = (s64)((s16)regval >> data->config->current_shift) * data->current_lsb_uA; - val = DIV_ROUND_CLOSEST(val, 1000); + if (val64 < 0) + val64 = -DIV_ROUND_CLOSEST_ULL(-val64, 1000); + else + val64 = DIV_ROUND_CLOSEST_ULL(val64, 1000); + val = clamp_val(val64, LONG_MIN, LONG_MAX); break; case INA2XX_CALIBRATION: val = regval; @@ -378,27 +383,29 @@ static int ina2xx_read_init(struct device *dev, int reg, long *val) */ static u16 ina226_alert_to_reg(struct ina2xx_data *data, int reg, long val) { + long limit; + switch (reg) { case INA2XX_SHUNT_VOLTAGE: - val = clamp_val(val, 0, SHRT_MAX * data->config->shunt_div); - val *= data->config->shunt_div; - val <<= data->config->shunt_voltage_shift; - return clamp_val(val, 0, SHRT_MAX); + val = min_t(long, val, DIV_ROUND_CLOSEST(SHRT_MAX, data->config->shunt_div)); + return min_t(long, (val * data->config->shunt_div) << data->config->shunt_voltage_shift, + SHRT_MAX); case INA2XX_BUS_VOLTAGE: - val = clamp_val(val, 0, 200000); - val = (val * 1000) << data->config->bus_voltage_shift; - val = DIV_ROUND_CLOSEST(val, data->config->bus_voltage_lsb); - return clamp_val(val, 0, USHRT_MAX); + val = min_t(long, val, 130000); + return min_t(long, + DIV_ROUND_CLOSEST((val * 1000) << data->config->bus_voltage_shift, + data->config->bus_voltage_lsb), + USHRT_MAX); case INA2XX_POWER: - val = clamp_val(val, 0, UINT_MAX - data->power_lsb_uW); - val = DIV_ROUND_CLOSEST(val, data->power_lsb_uW); - return clamp_val(val, 0, USHRT_MAX); + val = min_t(long, val, LONG_MAX - data->power_lsb_uW); + return min_t(long, DIV_ROUND_CLOSEST(val, data->power_lsb_uW), USHRT_MAX); case INA2XX_CURRENT: - val = clamp_val(val, INT_MIN / 1000, INT_MAX / 1000); + limit = (LONG_MAX - (data->current_lsb_uA / 2)) / 1000; + val = min_t(long, val, limit); /* signed register, result in mA */ val = DIV_ROUND_CLOSEST(val * 1000, data->current_lsb_uA); - val <<= data->config->current_shift; - return clamp_val(val, SHRT_MIN, SHRT_MAX); + limit = SHRT_MAX >> data->config->current_shift; + return (u16)(min_t(long, val, limit) << data->config->current_shift); default: /* programmer goofed */ WARN_ON_ONCE(1); @@ -537,6 +544,7 @@ static int sy24655_average_power_read(struct ina2xx_data *data, u8 reg, long *va u8 template[6]; int ret; long accumulator_24, sample_count; + u64 val64; /* 48-bit register read */ ret = i2c_smbus_read_i2c_block_data(data->client, reg, 6, template); @@ -555,7 +563,8 @@ static int sy24655_average_power_read(struct ina2xx_data *data, u8 reg, long *va return 0; } - *val = DIV_ROUND_CLOSEST(accumulator_24, sample_count) * data->power_lsb_uW; + val64 = (u64)DIV_ROUND_CLOSEST(accumulator_24, sample_count) * data->power_lsb_uW; + *val = min_t(u64, val64, LONG_MAX); return 0; } -- cgit v1.2.3 From 00feb1cce93dab948a299b69753d99c681d45a0b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 5 Feb 2025 12:27:15 -0800 Subject: hwmon: (ltc4282) Fix reading the minimum alarm voltage Coverity reports an out-of-bounds access when reading the minimum alarm voltage for the VGPIO channel. Add the missing return statement to fix the problem. Fixes: cbc29538dbf7 ("hwmon: Add driver for LTC4282") Cc: Nuno Sa Signed-off-by: Guenter Roeck --- drivers/hwmon/ltc4282.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/ltc4282.c b/drivers/hwmon/ltc4282.c index 39b9d3abca99..cc698803f8bf 100644 --- a/drivers/hwmon/ltc4282.c +++ b/drivers/hwmon/ltc4282.c @@ -374,8 +374,8 @@ static int ltc4282_read_in(struct ltc4282_state *st, u32 attr, long *val, channel, val); case hwmon_in_min_alarm: if (channel == LTC4282_CHAN_VGPIO) - ltc4282_read_alarm(st, LTC4282_ADC_ALERT_LOG, - LTC4282_GPIO_ALARM_L_MASK, val); + return ltc4282_read_alarm(st, LTC4282_ADC_ALERT_LOG, + LTC4282_GPIO_ALARM_L_MASK, val); return ltc4282_vdd_source_read_alm(st, LTC4282_VSOURCE_ALARM_L_MASK, -- cgit v1.2.3 From f46d5ab43a572b84773015a76966f5da56fc1748 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 25 Jul 2026 09:34:46 -0700 Subject: hwmon: (sht3x) Fix unaligned accesses Sashiko reports: In sht3x_update_client(), the 16-bit temperature and humidity values are extracted from a stack-allocated byte array using be16_to_cpup(). The pointers passed to this function are calculated as buf and buf + 3. Since the difference between the two pointers is an odd number of bytes, at least one of them is guaranteed to be at an unaligned offset. This will trigger an alignment fault on strict-alignment architectures such as ARMv5 or SPARC, resulting in a kernel panic. Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(), and put_unaligned_be16() instead of cpu_to_be16(). Fixes: 7c84f7f80d6f ("hwmon: add support for Sensirion SHT3x sensors") Reported-by: Sashiko Signed-off-by: Guenter Roeck --- drivers/hwmon/sht3x.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c index c2f6b73aa7f3..4d90f89a9929 100644 --- a/drivers/hwmon/sht3x.c +++ b/drivers/hwmon/sht3x.c @@ -21,6 +21,7 @@ #include #include #include +#include /* commands (high repeatability mode) */ static const unsigned char sht3x_cmd_measure_single_hpm[] = { 0x24, 0x00 }; @@ -276,9 +277,9 @@ static struct sht3x_data *sht3x_update_client(struct device *dev) if (ret) goto out; - val = be16_to_cpup((__be16 *)buf); + val = get_unaligned_be16(buf); data->temperature = sht3x_extract_temperature(val); - val = be16_to_cpup((__be16 *)(buf + 3)); + val = get_unaligned_be16(buf + 3); data->humidity = sht3x_extract_humidity(val); data->last_update = jiffies; } @@ -336,7 +337,7 @@ static int limits_update(struct sht3x_data *data) if (ret) return ret; - raw = be16_to_cpup((__be16 *)buffer); + raw = get_unaligned_be16(buffer); temperature = sht3x_extract_temperature((raw & 0x01ff) << 7); humidity = sht3x_extract_humidity(raw & 0xfe00); data->temperature_limits[index] = temperature; @@ -389,7 +390,7 @@ static size_t limit_write(struct device *dev, raw = ((u32)(temperature + 45000) * 24543) >> (16 + 7); raw |= ((humidity * 42950) >> 16) & 0xfe00; - *((__be16 *)position) = cpu_to_be16(raw); + put_unaligned_be16(raw, position); position += SHT3X_WORD_LEN; *position = crc8(sht3x_crc8_table, position - SHT3X_WORD_LEN, -- cgit v1.2.3 From aa9429edf9fc0e90d6f4da19ea4b5495a54ab117 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 25 Jul 2026 15:27:28 -0700 Subject: hwmon: (lm90) Only report alarms if driver is ready Userspace can read sysfs attributes before driver registration is complete, immediately after devm_hwmon_device_register_with_info() has been called. At that time, data->hwmon_dev is not yet initialized. This can trigger a NULL pointer access since lm90_update_device() and with it lm90_update_alarms_locked() will be called. This call schedules report_work and lm90_report_alarms(), which passes the still-NULL data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer dereference. Fix the problem by only scheduling the report and alert workers data->hwmon_dev is set. Reported-by: Sashiko Fixes: f6d0775119fb9 ("hwmon: (lm90) Rework alarm/status handling") Signed-off-by: Guenter Roeck --- drivers/hwmon/lm90.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 4b9c0ccdf260..c6186505661f 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -1194,7 +1194,7 @@ static int lm90_update_alarms_locked(struct lm90_data *data, bool force) check_enable = (client->irq || !(data->config_orig & 0x80)) && (data->config & 0x80); - if (force || check_enable) + if (data->hwmon_dev && (force || check_enable)) schedule_work(&data->report_work); /* @@ -1202,7 +1202,7 @@ static int lm90_update_alarms_locked(struct lm90_data *data, bool force) * alarms are all clear, and alerts are currently disabled. * Otherwise (re)schedule worker if needed. */ - if (check_enable) { + if (check_enable && data->hwmon_dev) { if (!(data->current_alarms & data->alert_alarms)) { dev_dbg(&client->dev, "Re-enabling ALERT#\n"); lm90_update_confreg(data, data->config & ~0x80); -- cgit v1.2.3 From 080bbf42faf77e6489ab30d5114c5f8f6ccbb1b8 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 27 Jul 2026 09:54:23 -0700 Subject: hwmon: (nzxt-smart2) DMA-align output buffer Sashiko reports: When send_output_report() calls hid_hw_output_report(), the underlying USB HID core calls usb_interrupt_msg() which maps this buffer directly for DMA. When the DMA mapping flushes or invalidates the cacheline, it will corrupt the adjacent variables (mutex, update_interval) that were modified concurrently by the CPU. This causes memory corruption due to cacheline sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings for this violation. Any operation that triggers send_output_report() (like setting a fan speed or updating the interval) causes the USB DMA mapping. On systems with non-coherent caches, this structural bug causes immediate and deterministic memory corruption. Align the output buffer to ARCH_DMA_MINALIGN to fix the problem. Reported-by: Sashiko Fixes: 53e68c20aeb1 ("hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.") Cc: Aleksandr Mezin Signed-off-by: Guenter Roeck --- drivers/hwmon/nzxt-smart2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c index e2316c46629d..ff0c0bee0e83 100644 --- a/drivers/hwmon/nzxt-smart2.c +++ b/drivers/hwmon/nzxt-smart2.c @@ -203,7 +203,7 @@ struct drvdata { */ struct mutex mutex; long update_interval; - u8 output_buffer[OUTPUT_REPORT_SIZE]; + u8 output_buffer[OUTPUT_REPORT_SIZE] __aligned(ARCH_DMA_MINALIGN); }; static long scale_pwm_value(long val, long orig_max, long new_max) -- cgit v1.2.3 From cdac670237258c8ca063aa8a16998f680d81b80d Mon Sep 17 00:00:00 2001 From: Linmao Li Date: Thu, 23 Jul 2026 10:11:40 +0800 Subject: i2c: spacemit: request IRQ after controller initialization spacemit_i2c_probe() requests the IRQ before it enables the clocks, resets the controller and runs init_completion(). If an interrupt is already pending, the handler runs too early: it reads registers while the clocks are still off and calls complete() on an uninitialized completion. Request the IRQ after the controller and completion are initialized, but still before the adapter is registered. Fixes: 5ea558473fa3 ("i2c: spacemit: add support for SpacemiT K1 SoC") Signed-off-by: Linmao Li Cc: # v6.15+ Reviewed-by: Troy Mitchell Reviewed-by: Alex Elder Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260723021140.2293844-1-lilinmao@kylinos.cn --- drivers/i2c/busses/i2c-k1.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c index 51a0c3d80fc9..3fe716cc153d 100644 --- a/drivers/i2c/busses/i2c-k1.c +++ b/drivers/i2c/busses/i2c-k1.c @@ -723,11 +723,6 @@ static int spacemit_i2c_probe(struct platform_device *pdev) if (i2c->irq < 0) return dev_err_probe(dev, i2c->irq, "failed to get irq resource"); - ret = devm_request_irq(i2c->dev, i2c->irq, spacemit_i2c_irq_handler, - IRQF_NO_SUSPEND, dev_name(i2c->dev), i2c); - if (ret) - return dev_err_probe(dev, ret, "failed to request irq"); - clk = devm_clk_get_enabled(dev, "func"); if (IS_ERR(clk)) return dev_err_probe(dev, PTR_ERR(clk), "failed to enable func clock"); @@ -755,6 +750,11 @@ static int spacemit_i2c_probe(struct platform_device *pdev) init_completion(&i2c->complete); + ret = devm_request_irq(i2c->dev, i2c->irq, spacemit_i2c_irq_handler, + IRQF_NO_SUSPEND, dev_name(i2c->dev), i2c); + if (ret) + return dev_err_probe(dev, ret, "failed to request irq"); + platform_set_drvdata(pdev, i2c); ret = i2c_add_numbered_adapter(&i2c->adapt); -- cgit v1.2.3 From 82048795242f04275a3f49ffc66ad851b6120954 Mon Sep 17 00:00:00 2001 From: Myeonghun Pak Date: Tue, 21 Jul 2026 23:41:47 +0900 Subject: i2c: amd-mp2: Unregister callback on adapter add failure amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI driver's callback table before the adapter is registered. If i2c_add_adapter() fails, probe returns and devres frees the context, but the PCI driver can still dereference the stale pointer from its IRQ and system-sleep callbacks. Unregister the callback before returning the adapter registration error. Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller") Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Cc: # v5.2+ Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260721144147.31150-1-mhun512@gmail.com --- drivers/i2c/busses/i2c-amd-mp2-plat.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-amd-mp2-plat.c b/drivers/i2c/busses/i2c-amd-mp2-plat.c index 188e24cc4d35..9fdd6a5fb8b6 100644 --- a/drivers/i2c/busses/i2c-amd-mp2-plat.c +++ b/drivers/i2c/busses/i2c-amd-mp2-plat.c @@ -316,8 +316,10 @@ static int i2c_amd_probe(struct platform_device *pdev) amd_mp2_pm_runtime_put(mp2_dev); - if (ret < 0) + if (ret < 0) { dev_err(&pdev->dev, "i2c add adapter failed = %d\n", ret); + amd_mp2_unregister_cb(&i2c_dev->common); + } return ret; } -- cgit v1.2.3 From dbc3791e3b2472e1ccc08947e0f83b443470ff4f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 24 Jul 2026 07:29:01 +0000 Subject: net: do not send ICMP/NDISC Redirects when peer allocation fails When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry under memory pressure or tree size caps, redirect handlers previously fell back to sending un-rate-limited ICMP/NDISC Redirect messages. In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL. In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into inet_peer_xrlim_allow(), which returned true when peer == NULL. Because ICMP/NDISC Redirects are not part of the default global rate limit mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates an un-rate-limited ICMP packet storm. Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and ndisc_send_redirect() when peer is NULL. Fixes: 92d868292634 ("inetpeer: Move ICMP rate limiting state into inet_peer entries.") Signed-off-by: Eric Dumazet Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260724072901.1633601-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv4/route.c | 2 -- net/ipv6/ip6_output.c | 2 +- net/ipv6/ndisc.c | 2 ++ 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 3f3de5164d6e..152d8cb28f65 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -892,8 +892,6 @@ void ip_rt_send_redirect(struct sk_buff *skb) peer = inet_getpeer_v4(net->ipv4.peers, ip_hdr(skb)->saddr, vif); if (!peer) { rcu_read_unlock(); - icmp_send(skb, ICMP_REDIRECT, ICMP_REDIR_HOST, - rt_nexthop(rt, ip_hdr(skb)->daddr)); return; } diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 368e4fa3b43c..2c44e5ed6171 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -641,7 +641,7 @@ int ip6_forward(struct sk_buff *skb) /* Limit redirects both by destination (here) and by source (inside ndisc_send_redirect) */ - if (inet_peer_xrlim_allow(peer, 1*HZ)) + if (peer && inet_peer_xrlim_allow(peer, 1*HZ)) ndisc_send_redirect(skb, target); rcu_read_unlock(); } else { diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index f867ec8d3d90..fe36b3f51285 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1707,6 +1707,8 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) } peer = inet_getpeer_v6(net->ipv6.peers, &ipv6_hdr(skb)->saddr); + if (!peer) + goto release; ret = inet_peer_xrlim_allow(peer, 1*HZ); if (!ret) -- cgit v1.2.3 From d99607c888f26e8a4e9fe9772860cef4aff86bb4 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Sun, 19 Jul 2026 22:19:43 +0200 Subject: i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock Fix a severe AB/BA deadlock between the Common Clock Framework (CCF) and the I2C adapter lock, which triggers when an I2C-controlled clock generator client (like the Si5351) is registered or modified under the CCF. During an i2c client clock (generator) frequency change, the CCF acquires its global 'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's chip registers, stalling for the adapter's I2C bus lock. Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO expander handling LEDs) can hold the I2C adapter lock. Inside this parallel transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host controller's input clock to calculate bus timings. This call attempts to acquire the blocked CCF 'prepare_lock', creating a circular dependency that freezes the system. The jz4780 host controller clock itself is static and never changes at runtime. However, calling clk_get_rate() inside the active transfer path introduces an unnecessary dependency on the CCF internal locks. Eliminate this synchronous clk_get_rate() call from the active transfer path by caching the static host peripheral clock rate once - inside the private jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed() to use this cached value, safely decoupling active I2C transactions from the CCF internal locks without any risk of stale timings. Assisted-by web based Google AI (pinpointing the bug and writing the message). Fixes: ba92222ed63a12 ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780") Signed-off-by: H. Nikolaus Schaller Cc: # v4.1+ Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/2db6fd233aceb7238474e4833f4d25ca681c3ffb.1784492382.git.hns@goldelico.com --- drivers/i2c/busses/i2c-jz4780.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c index 664a5471d933..695be3b21460 100644 --- a/drivers/i2c/busses/i2c-jz4780.c +++ b/drivers/i2c/busses/i2c-jz4780.c @@ -141,6 +141,7 @@ struct jz4780_i2c { void __iomem *iomem; int irq; struct clk *clk; + unsigned long clk_rate_khz; struct i2c_adapter adap; const struct ingenic_i2c_config *cdata; @@ -246,7 +247,7 @@ static int jz4780_i2c_set_target(struct jz4780_i2c *i2c, unsigned char address) static int jz4780_i2c_set_speed(struct jz4780_i2c *i2c) { - int dev_clk_khz = clk_get_rate(i2c->clk) / 1000; + int dev_clk_khz = i2c->clk_rate_khz; int cnt_high = 0; /* HIGH period count of the SCL clock */ int cnt_low = 0; /* LOW period count of the SCL clock */ int cnt_period = 0; /* period count of the SCL clock */ @@ -796,6 +797,8 @@ static int jz4780_i2c_probe(struct platform_device *pdev) if (IS_ERR(i2c->clk)) return PTR_ERR(i2c->clk); + i2c->clk_rate_khz = clk_get_rate(i2c->clk) / 1000; + ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &clk_freq); if (ret) { -- cgit v1.2.3 From a60f58eb70e4e4c2ba4ace8b292dea64e5b7b290 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 27 Jul 2026 13:13:54 -0700 Subject: hwmon: (lm63) Mask PWM frequency multiplier to supported bits Sashiko is concerned that reading a PWM frequency multiplier outside the supported range of [1, 31] might result in bad PWM values written to the chip. Technically, the chip should never return a value with the upper 3 bits set, so this should never happen. However, it is unknown if there are LM63 variants where the upper bits of the register can be written. Mask the register value read from the chip to only accept the lower 5 bit when reading it from the chip to avoid the problem. Reported-by: Sashiko Signed-off-by: Guenter Roeck --- drivers/hwmon/lm63.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index e2a429e579ac..da09770c05e7 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -247,8 +247,7 @@ static struct lm63_data *lm63_update_device(struct device *dev) LM63_REG_TACH_LIMIT_MSB) << 8); } - data->pwm1_freq = i2c_smbus_read_byte_data(client, - LM63_REG_PWM_FREQ); + data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ) & 0x1f; if (data->pwm1_freq == 0) data->pwm1_freq = 1; data->pwm1[0] = i2c_smbus_read_byte_data(client, @@ -1187,7 +1186,7 @@ static void lm63_init_client(struct lm63_data *data) data->config |= 0x04; /* We may need pwm1_freq before ever updating the client data */ - data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); + data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ) & 0x1f; if (data->pwm1_freq == 0) data->pwm1_freq = 1; -- cgit v1.2.3 From d0b704e569ac3b8416d8e02270cdc9bf830ed395 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 27 Jul 2026 13:35:37 -0700 Subject: hwmon: (nct6775-core) Prevent access to unsupported weight registers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sashiko reports: During initialization of the nct6116 chip, the driver sets data->pwm_num to 5. However, it assigns several NCT6106 register arrays (such as NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP. These arrays only contain 3 elements. In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If data->has_pwm has bits 3 or 4 set (which is structurally possible for nct6116), the loop attempts to read elements at index 3 and 4 from these 3-element arrays. This results in a global out-of-bounds read, which can be caught by KASAN. Furthermore, the driver uses these garbage out-of-bounds values as hardware register addresses for subsequent read and write operations. This leads to invalid hardware register access, potentially causing hardware misconfiguration or system crashes. The underlying problem is that the chip does support up to five fan control channels, but only the first three support weight control. Fix the problem by extending the affected weight register arrays with zeroed fields. The driver uses zeroed register addresses to determine if a register is supported or not, and skips accesses for unsupported registers. Reported-by: Sashiko Fixes: 29c7cb485b32 ("hwmon: (nct6775) Integrate new model nct6116") Cc: Björn Gerhart Cc: Florian Bezdeka Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/nct6775-core.c b/drivers/hwmon/nct6775-core.c index 51253acff4b0..94482c8092cd 100644 --- a/drivers/hwmon/nct6775-core.c +++ b/drivers/hwmon/nct6775-core.c @@ -791,12 +791,12 @@ static const u16 NCT6106_REG_TOLERANCE_H[] = { 0x112, 0x122, 0x132 }; static const u16 NCT6106_REG_TARGET[] = { 0x111, 0x121, 0x131 }; -static const u16 NCT6106_REG_WEIGHT_TEMP_SEL[] = { 0x168, 0x178, 0x188 }; -static const u16 NCT6106_REG_WEIGHT_TEMP_STEP[] = { 0x169, 0x179, 0x189 }; -static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x16a, 0x17a, 0x18a }; -static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x18b }; -static const u16 NCT6106_REG_WEIGHT_TEMP_BASE[] = { 0x16c, 0x17c, 0x18c }; -static const u16 NCT6106_REG_WEIGHT_DUTY_BASE[] = { 0x16d, 0x17d, 0x18d }; +static const u16 NCT6106_REG_WEIGHT_TEMP_SEL[] = { 0x168, 0x178, 0x188, 0, 0 }; +static const u16 NCT6106_REG_WEIGHT_TEMP_STEP[] = { 0x169, 0x179, 0x189, 0, 0 }; +static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x16a, 0x17a, 0x18a, 0, 0 }; +static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x18b, 0, 0 }; +static const u16 NCT6106_REG_WEIGHT_TEMP_BASE[] = { 0x16c, 0x17c, 0x18c, 0, 0 }; +static const u16 NCT6106_REG_WEIGHT_DUTY_BASE[] = { 0x16d, 0x17d, 0x18d, 0, 0 }; static const u16 NCT6106_REG_AUTO_TEMP[] = { 0x160, 0x170, 0x180 }; static const u16 NCT6106_REG_AUTO_PWM[] = { 0x164, 0x174, 0x184 }; -- cgit v1.2.3 From 1395a676ec15a0a02a2a6d86602324f2d5fd41d5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 23 Jul 2026 14:42:45 +0000 Subject: vxlan: re-fetch eth header after route_shortcircuit() Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb). Inside route_shortcircuit(), pskb_may_pull() can be called, which may reallocate skb->head. In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to freed memory, leading to a use-after-free when dereferencing eth->h_dest. Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit(). Fixes: ae8840825605 ("VXLAN: Allow L2 redirection with L3 switching") Cc: stable@vger.kernel.org Signed-off-by: Eric Dumazet Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20260723144249.759100-2-edumazet@google.com Signed-off-by: Jakub Kicinski --- drivers/net/vxlan/vxlan_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c index d834a4865aec..a05654a55bd6 100644 --- a/drivers/net/vxlan/vxlan_core.c +++ b/drivers/net/vxlan/vxlan_core.c @@ -2796,6 +2796,7 @@ static netdev_tx_t vxlan_xmit(struct sk_buff *skb, struct net_device *dev) (ntohs(eth->h_proto) == ETH_P_IP || ntohs(eth->h_proto) == ETH_P_IPV6)) { did_rsc = route_shortcircuit(dev, skb); + eth = eth_hdr(skb); if (did_rsc) f = vxlan_find_mac_tx(vxlan, eth->h_dest, vni); } -- cgit v1.2.3 From 760d36e737f2b3867762f42af36c663f55babcc4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 23 Jul 2026 14:42:46 +0000 Subject: vxlan: unclone skb head before modifying eth header in route_shortcircuit() When route_shortcircuit() performs L3 short-circuit routing, it modifies the Ethernet header of the skb in-place: memcpy(eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest, dev->addr_len); memcpy(eth_hdr(skb)->h_dest, n->ha, dev->addr_len); If the incoming skb is cloned (for example by packet sockets, tcpdump, or dev_queue_xmit), modifying the Ethernet header without uncloning can corrupt the packet header for other readers holding a reference to the cloned skb. Ensure the skb header is writable and unshared by calling skb_cow_head(skb, 0) prior to updating the Ethernet header. If skb_cow_head() fails, abort short-circuiting and return false to allow standard packet processing fallback. Fixes: e4f67addf158 ("add DOVE extensions for VXLAN") Cc: stable@vger.kernel.org Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260723144249.759100-3-edumazet@google.com Signed-off-by: Jakub Kicinski --- drivers/net/vxlan/vxlan_core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c index a05654a55bd6..e831fe203442 100644 --- a/drivers/net/vxlan/vxlan_core.c +++ b/drivers/net/vxlan/vxlan_core.c @@ -2163,6 +2163,10 @@ static bool route_shortcircuit(struct net_device *dev, struct sk_buff *skb) diff = !ether_addr_equal(eth_hdr(skb)->h_dest, n->ha); if (diff) { + if (skb_cow_head(skb, 0)) { + neigh_release(n); + return false; + } memcpy(eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest, dev->addr_len); memcpy(eth_hdr(skb)->h_dest, n->ha, dev->addr_len); -- cgit v1.2.3 From 8eca411347e1d38964f9ed2c8d3b6ab0e7e4473d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 23 Jul 2026 14:42:47 +0000 Subject: vxlan: use neigh_ha_snapshot() in route_shortcircuit() The neighbour hardware address n->ha can be updated asynchronously by the neighbour subsystem, protected by n->ha_lock seqlock. Reading n->ha without holding the seqlock loop can lead to torn reads or reading a partially updated MAC address. Use neigh_ha_snapshot() in route_shortcircuit() to safely copy n->ha under read_seqbegin()/read_seqretry() lock protection before using it. Note that arp_reduce() and neigh_reduce() seem to have the same issue left for future patches. Fixes: e4f67addf158 ("add DOVE extensions for VXLAN") Cc: stable@vger.kernel.org Signed-off-by: Eric Dumazet Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20260723144249.759100-4-edumazet@google.com Signed-off-by: Jakub Kicinski --- drivers/net/vxlan/vxlan_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c index e831fe203442..be3c2bc2cd9a 100644 --- a/drivers/net/vxlan/vxlan_core.c +++ b/drivers/net/vxlan/vxlan_core.c @@ -2159,9 +2159,11 @@ static bool route_shortcircuit(struct net_device *dev, struct sk_buff *skb) } if (n) { + u8 haddr[ETH_ALEN]; bool diff; - diff = !ether_addr_equal(eth_hdr(skb)->h_dest, n->ha); + neigh_ha_snapshot(haddr, n, dev); + diff = !ether_addr_equal_unaligned(eth_hdr(skb)->h_dest, haddr); if (diff) { if (skb_cow_head(skb, 0)) { neigh_release(n); @@ -2169,7 +2171,7 @@ static bool route_shortcircuit(struct net_device *dev, struct sk_buff *skb) } memcpy(eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest, dev->addr_len); - memcpy(eth_hdr(skb)->h_dest, n->ha, dev->addr_len); + memcpy(eth_hdr(skb)->h_dest, haddr, dev->addr_len); } neigh_release(n); return diff; -- cgit v1.2.3 From 26bb2dd0a8839617e2c79ffbbe1923f8e4bab9fb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 23 Jul 2026 14:42:48 +0000 Subject: vxlan: use pskb_network_may_pull() in route_shortcircuit() route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr)) (or ipv6hdr), which checks if bytes are available starting from skb->data. However, in vxlan_xmit(), skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20) only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of IP header), leaving the rest of the IP header potentially un-pulled in non-linear frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled linear buffer length. Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to the length check to ensure the full network header is present in the linear buffer. Fixes: e4f67addf158 ("add DOVE extensions for VXLAN") Cc: stable@vger.kernel.org Signed-off-by: Eric Dumazet Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20260723144249.759100-5-edumazet@google.com Signed-off-by: Jakub Kicinski --- drivers/net/vxlan/vxlan_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c index be3c2bc2cd9a..2163e2687db0 100644 --- a/drivers/net/vxlan/vxlan_core.c +++ b/drivers/net/vxlan/vxlan_core.c @@ -2111,7 +2111,7 @@ static bool route_shortcircuit(struct net_device *dev, struct sk_buff *skb) { struct iphdr *pip; - if (!pskb_may_pull(skb, sizeof(struct iphdr))) + if (!pskb_network_may_pull(skb, sizeof(struct iphdr))) return false; pip = ip_hdr(skb); n = neigh_lookup(&arp_tbl, &pip->daddr, dev); @@ -2137,7 +2137,7 @@ static bool route_shortcircuit(struct net_device *dev, struct sk_buff *skb) */ if (!ipv6_mod_enabled()) return false; - if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) + if (!pskb_network_may_pull(skb, sizeof(struct ipv6hdr))) return false; pip6 = ipv6_hdr(skb); n = neigh_lookup(&nd_tbl, &pip6->daddr, dev); -- cgit v1.2.3 From b9553558b48db54ac9273e6b98d7263ef5c1a329 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 23 Jul 2026 14:42:49 +0000 Subject: vxlan: use pskb_network_may_pull() for transmit path header pulls In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was being called to verify the availability of network layer headers (ARP, IPv6/ND, IP/IPv6 MDB keys). However, during transmit skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data rather than skb_network_offset(skb) + len, which can leave part of the network header in non-linear frags. Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly account for the MAC header offset. Fixes: e4f67addf158 ("add DOVE extensions for VXLAN") Fixes: f564f45c4518 ("vxlan: add ipv6 proxy support") Fixes: 0f83e69f44bf ("vxlan: Add MDB data path support") Signed-off-by: Eric Dumazet Cc: stable@vger.kernel.org Reviewed-by: Vadim Fedorenko Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260723144249.759100-6-edumazet@google.com Signed-off-by: Jakub Kicinski --- drivers/net/vxlan/vxlan_core.c | 6 +++--- drivers/net/vxlan/vxlan_mdb.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c index 2163e2687db0..1ded27768a97 100644 --- a/drivers/net/vxlan/vxlan_core.c +++ b/drivers/net/vxlan/vxlan_core.c @@ -1850,7 +1850,7 @@ static int arp_reduce(struct net_device *dev, struct sk_buff *skb, __be32 vni) if (dev->flags & IFF_NOARP) goto out; - if (!pskb_may_pull(skb, arp_hdr_len(dev))) { + if (!pskb_network_may_pull(skb, arp_hdr_len(dev))) { dev_dstats_tx_dropped(dev); vxlan_vnifilter_count(vxlan, vni, NULL, VXLAN_VNI_STATS_TX_DROPS, 0); @@ -2763,8 +2763,8 @@ static netdev_tx_t vxlan_xmit(struct sk_buff *skb, struct net_device *dev) return arp_reduce(dev, skb, vni); #if IS_ENABLED(CONFIG_IPV6) else if (ntohs(eth->h_proto) == ETH_P_IPV6 && - pskb_may_pull(skb, sizeof(struct ipv6hdr) + - sizeof(struct nd_msg)) && + pskb_network_may_pull(skb, sizeof(struct ipv6hdr) + + sizeof(struct nd_msg)) && ipv6_hdr(skb)->nexthdr == IPPROTO_ICMPV6) { struct nd_msg *m = (struct nd_msg *)(ipv6_hdr(skb) + 1); diff --git a/drivers/net/vxlan/vxlan_mdb.c b/drivers/net/vxlan/vxlan_mdb.c index af7a0d7f95a5..9a9038ae90c1 100644 --- a/drivers/net/vxlan/vxlan_mdb.c +++ b/drivers/net/vxlan/vxlan_mdb.c @@ -1631,7 +1631,7 @@ struct vxlan_mdb_entry *vxlan_mdb_entry_skb_get(struct vxlan_dev *vxlan, switch (skb->protocol) { case htons(ETH_P_IP): - if (!pskb_may_pull(skb, sizeof(struct iphdr))) + if (!pskb_network_may_pull(skb, sizeof(struct iphdr))) return NULL; group.dst.sa.sa_family = AF_INET; group.dst.sin.sin_addr.s_addr = ip_hdr(skb)->daddr; @@ -1640,7 +1640,7 @@ struct vxlan_mdb_entry *vxlan_mdb_entry_skb_get(struct vxlan_dev *vxlan, break; #if IS_ENABLED(CONFIG_IPV6) case htons(ETH_P_IPV6): - if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) + if (!pskb_network_may_pull(skb, sizeof(struct ipv6hdr))) return NULL; group.dst.sa.sa_family = AF_INET6; group.dst.sin6.sin6_addr = ipv6_hdr(skb)->daddr; -- cgit v1.2.3 From b4f1719dfea023220e0e6bd892b087d76b2a6a49 Mon Sep 17 00:00:00 2001 From: Zihan Xi Date: Fri, 24 Jul 2026 00:38:41 +0800 Subject: tipc: avoid use-after-free in poll trace queue dumps TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most queue-dump callsites already serialize that walk under the socket lock or sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(..., TIPC_DUMP_ALL, ...) without holding either lock. That lets the poll trace path reach tipc_list_dump() and backlog head/tail dumping while another context dequeues and frees an skb, leaving the trace helper dereferencing a stale queue entry. Stop the unlocked poll trace site from requesting queue dumps. Other queue dump trace callsites keep their existing output under the locking they already provide, while poll still emits the event itself without walking live queue members from an unlocked context. Fixes: b4b9771bcbbd ("tipc: enable tracepoints in tipc") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zihan Xi Signed-off-by: Ren Wei Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/f8119abd5e5ecc400597de667ae9d39656de56d0.1784794294.git.zihanx@nebusec.ai Signed-off-by: Jakub Kicinski --- net/tipc/socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 185c24003b82..d5d70eb230b5 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -796,7 +796,7 @@ static __poll_t tipc_poll(struct file *file, struct socket *sock, __poll_t revents = 0; sock_poll_wait(file, sock, wait); - trace_tipc_sk_poll(sk, NULL, TIPC_DUMP_ALL, " "); + trace_tipc_sk_poll(sk, NULL, TIPC_DUMP_NONE, " "); if (sk->sk_shutdown & RCV_SHUTDOWN) revents |= EPOLLRDHUP | EPOLLIN | EPOLLRDNORM; -- cgit v1.2.3 From 6aea62e433fe1b586202a5fee8b5807ce635e1d7 Mon Sep 17 00:00:00 2001 From: Zhiling Zou Date: Fri, 24 Jul 2026 00:48:52 +0800 Subject: net: ipv6: clear suppressed fib6 rule result fib6_rule_suppress() drops a suppressed route with ip6_rt_put_flags(), but leaves res->rt6 pointing at the released rt6_info. If no later rule supplies a replacement, fib6_rule_lookup() still sees res.rt6 and returns that stale dst to its caller. A suppressing rule can therefore leak a released route back to rt6_lookup(), and the next put hits rcuref_put_slowpath() from dst_release(). Clear res->rt6 when suppressing the route so suppressed lookups fall through to the null dst instead of reusing the released one. Fixes: cdef485217d3 ("ipv6: fix memory leak in fib6_rule_suppress") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Signed-off-by: Ren Wei Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/4b8acb7787d54e440155585dd32ebdf0bef7d122.1784710966.git.zhilinz@nebusec.ai Signed-off-by: Jakub Kicinski --- net/ipv6/fib6_rules.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c index e1b2b4fa6e18..89ee3c969ca7 100644 --- a/net/ipv6/fib6_rules.c +++ b/net/ipv6/fib6_rules.c @@ -308,6 +308,7 @@ INDIRECT_CALLABLE_SCOPE bool fib6_rule_suppress(struct fib_rule *rule, suppress_route: ip6_rt_put_flags(rt, flags); + res->rt6 = NULL; return true; } -- cgit v1.2.3 From a39789f211b8a4125f0c70e05b30cf715f4f187d Mon Sep 17 00:00:00 2001 From: Zhiling Zou Date: Fri, 24 Jul 2026 00:52:48 +0800 Subject: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp->ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry. Fixes: 6db6f0eae605 ("bridge: multicast to unicast") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Signed-off-by: Ren Wei Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/1cf0898872ef7c72d5f4c0304414a192c6dac591.1784707712.git.zhilinz@nebusec.ai Signed-off-by: Jakub Kicinski --- net/bridge/br_multicast.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 6b3ac473fd22..00aa9b2879d6 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -3687,6 +3687,7 @@ br_multicast_leave_group(struct net_bridge_mcast *brmctx, p->flags |= MDB_PG_FLAGS_FAST_LEAVE; br_multicast_del_pg(mp, p, pp); + break; } goto out; } -- cgit v1.2.3 From 9d8da8e0a9bce4a340af60dd0446bc7eb8d07587 Mon Sep 17 00:00:00 2001 From: Yuxiang Yang Date: Thu, 23 Jul 2026 22:56:23 +0000 Subject: sctp: reject stale cookies with mismatched verification tags sctp_unpack_cookie() skips cookie expiration checks whenever an association already exists. This is broader than the exception in RFC 9260 Section 5.2.4. For an existing association, Section 5.2.4 permits an expired State Cookie only when both Verification Tags in the cookie match the current association. Otherwise, the packet SHOULD be discarded and a Stale Cookie ERROR MUST be sent. The broad check lets an expired Action A restart cookie reach sctp_sf_do_dupcook_a(). In a runtime test with the default 60 second cookie lifetime, replaying such a cookie after 65 seconds returned a COOKIE-ACK and restarted the association. Check cookie expiration unless both Verification Tags match. This preserves the Action D exception for a lost COOKIE ACK while rejecting expired cookies in all other cases. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Yuxiang Yang Acked-by: Xin Long Link: https://patch.msgid.link/20260723225623.2658868-1-yangyx22@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski --- net/sctp/sm_make_chunk.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index c02809264075..a1c0334a1038 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -1802,9 +1802,9 @@ struct sctp_association *sctp_unpack_cookie( goto fail; } - /* Check to see if the cookie is stale. If there is already - * an association, there is no need to check cookie's expiration - * for init collision case of lost COOKIE ACK. + /* Check to see if the cookie is stale. RFC 9260 Section 5.2.4 + * exempts an expired cookie only when both Verification Tags match + * the current association. * If skb has been timestamped, then use the stamp, otherwise * use current time. This introduces a small possibility that * a cookie may be considered expired, but this would only slow @@ -1815,7 +1815,10 @@ struct sctp_association *sctp_unpack_cookie( else kt = ktime_get_real(); - if (!asoc && ktime_before(bear_cookie->expiration, kt)) { + if ((!asoc || + asoc->c.my_vtag != bear_cookie->my_vtag || + asoc->c.peer_vtag != bear_cookie->peer_vtag) && + ktime_before(bear_cookie->expiration, kt)) { suseconds_t usecs = ktime_to_us(ktime_sub(kt, bear_cookie->expiration)); __be32 n = htonl(usecs); -- cgit v1.2.3 From 9388e7c820e33d3a7dfde9a9c16ad4ac60f29d37 Mon Sep 17 00:00:00 2001 From: Yichong Chen Date: Sat, 4 Jul 2026 13:27:14 +0800 Subject: smb: client: free partially allocated transform folio queue netfs_alloc_folioq_buffer() may leave a partially allocated folio queue attached to the caller's buffer pointer when it returns an error. smb3_init_transform_rq() stores the buffer in the request only after allocation succeeds, so the common error path cannot free a partial allocation. Store the buffer pointer before checking the return value so err_free releases it. Signed-off-by: Yichong Chen Reviewed-by: ChenXiaoSong Signed-off-by: Steve French --- fs/smb/client/smb2ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index cbd51a08e97e..192649fec25d 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -4745,10 +4745,10 @@ smb3_init_transform_rq(struct TCP_Server_Info *server, int num_rqst, size_t cur_size = 0; rc = netfs_alloc_folioq_buffer(NULL, &buffer, &cur_size, size, GFP_NOFS); + new->rq_buffer = buffer; if (rc < 0) goto err_free; - new->rq_buffer = buffer; iov_iter_folio_queue(&new->rq_iter, ITER_SOURCE, buffer, 0, 0, size); -- cgit v1.2.3 From bd0e9289e2642f6a5c54faad304ce0f41e926d22 Mon Sep 17 00:00:00 2001 From: Asim Viladi Oglu Manizada Date: Sat, 25 Jul 2026 03:21:06 +0000 Subject: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Reject a new unique peer when transport_count has reached U16_MAX. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit. Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Cc: stable@vger.kernel.org Signed-off-by: Asim Viladi Oglu Manizada Acked-by: Xin Long Link: https://patch.msgid.link/20260725032053.521705-1-manizada@pm.me Signed-off-by: Jakub Kicinski --- net/sctp/associola.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 62d3cc155809..b6ac0966420a 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -614,6 +614,9 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc, return peer; } + if (asoc->peer.transport_count == U16_MAX) + return NULL; + peer = sctp_transport_new(asoc->base.net, addr, gfp); if (!peer) return NULL; -- cgit v1.2.3 From 5546da86894d5906f131b05890705a7abf949d84 Mon Sep 17 00:00:00 2001 From: David Corvaglia Date: Sun, 26 Jul 2026 06:26:05 +0000 Subject: net: bridge: mrp: fix Option TLV length in MRP_Test frames oui is a pointer, so sizeof(oui) is the pointer size. The MRA Option TLV thus advertises a wrong length (15 vs 10 on x86_64), causing misparsing of the frame on peers. Fix is to replace with sizeof(*oui). Fixes: f7458934b079 ("net: bridge: mrp: Update the Test frames for MRA") Signed-off-by: David Corvaglia Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20260726062605.2746-1-david@corvaglia.dev Signed-off-by: Jakub Kicinski --- net/bridge/br_mrp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_mrp.c b/net/bridge/br_mrp.c index 3f7126a7d720..179d2470b724 100644 --- a/net/bridge/br_mrp.c +++ b/net/bridge/br_mrp.c @@ -215,7 +215,7 @@ static struct sk_buff *br_mrp_alloc_test_skb(struct br_mrp *mrp, struct br_mrp_oui_hdr *oui = NULL; u8 length; - length = sizeof(*sub_opt) + sizeof(*sub_tlv) + sizeof(oui) + + length = sizeof(*sub_opt) + sizeof(*sub_tlv) + sizeof(*oui) + MRP_OPT_PADDING; br_mrp_skb_tlv(skb, BR_MRP_TLV_HEADER_OPTION, length); -- cgit v1.2.3 From f47064c970d3e920a27435454c02df310695f6e1 Mon Sep 17 00:00:00 2001 From: Surendra Singh Chouhan Date: Mon, 27 Jul 2026 11:08:04 +0530 Subject: ASoC: sophgo: return 1 on volume change in cv1800b_adc_volume_set() cv1800b_adc_volume_set() serves as the .put callback for the "Internal I2S Capture Volume" control. ALSA mixer control callbacks must return 1 when the register value is modified, 0 if unchanged, or a negative error code on failure. Returning 0 unconditionally causes ALSA core to assume the value was unchanged, suppressing SNDRV_CTL_EVENT_MASK_VALUE change notifications to userspace sound servers (e.g. PipeWire/PulseAudio). Fix this by comparing the new register value with the existing register value. If unchanged, return 0; otherwise, write the updated value and return 1. Fixes: 4cf8752a03e6 ("ASoC: sophgo: add CV1800B internal ADC codec driver") Signed-off-by: Surendra Singh Chouhan Link: https://patch.msgid.link/20260727053804.25599-1-kr494167@gmail.com Signed-off-by: Mark Brown --- sound/soc/sophgo/cv1800b-sound-adc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/soc/sophgo/cv1800b-sound-adc.c b/sound/soc/sophgo/cv1800b-sound-adc.c index b66761156b99..bd93e261bdd1 100644 --- a/sound/soc/sophgo/cv1800b-sound-adc.c +++ b/sound/soc/sophgo/cv1800b-sound-adc.c @@ -251,16 +251,22 @@ static int cv1800b_adc_volume_set(struct snd_kcontrol *kcontrol, u32 v_left = clamp_t(u32, ucontrol->value.integer.value[0], 0, 24); u32 v_right = clamp_t(u32, ucontrol->value.integer.value[1], 0, 24); - u32 val; + u32 val, old_val; val = readl(priv->regs + CV1800B_RXADC_ANA0); + old_val = val; + val = u32_replace_bits(val, cv1800b_gains[v_left], REG_COMB_LEFT_VOLUME); val = u32_replace_bits(val, cv1800b_gains[v_right], REG_COMB_RIGHT_VOLUME); + + if (val == old_val) + return 0; + writel(val, priv->regs + CV1800B_RXADC_ANA0); - return 0; + return 1; } static DECLARE_TLV_DB_SCALE(cv1800b_volume_tlv, 0, 200, 0); -- cgit v1.2.3 From b476724a6d9b2e7db43cb7a59defd396f94cf77c Mon Sep 17 00:00:00 2001 From: Dmitry Antipov Date: Mon, 27 Jul 2026 20:20:35 +0300 Subject: smb: client: simplify cifs_fscache_get_super_cookie() Avoid redundant 'strlen()' and use the convenient 'strreplace()' to simplify 'cifs_fscache_get_super_cookie()'. Signed-off-by: Dmitry Antipov Signed-off-by: Steve French --- fs/smb/client/fscache.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/fs/smb/client/fscache.c b/fs/smb/client/fscache.c index 01424a5cdb99..9f66bbcd3801 100644 --- a/fs/smb/client/fscache.c +++ b/fs/smb/client/fscache.c @@ -38,7 +38,6 @@ int cifs_fscache_get_super_cookie(struct cifs_tcon *tcon) struct TCP_Server_Info *server = tcon->ses->server; struct fscache_volume *vcookie; const struct sockaddr *sa = (struct sockaddr *)&server->dstaddr; - size_t slen, i; char *sharename; char *key; int ret = -ENOMEM; @@ -73,10 +72,7 @@ int cifs_fscache_get_super_cookie(struct cifs_tcon *tcon) return PTR_ERR(sharename); } - slen = strlen(sharename); - for (i = 0; i < slen; i++) - if (sharename[i] == '/') - sharename[i] = ';'; + strreplace(sharename, '/', ';'); key = kasprintf(GFP_KERNEL, "cifs,%pISpc,%s", sa, sharename); if (!key) -- cgit v1.2.3 From 9ad4c2331d2330ab280180a337c7d30656496c6d Mon Sep 17 00:00:00 2001 From: Jackie Dong Date: Mon, 27 Jul 2026 12:14:51 +0800 Subject: ASoC: amd: acp: Add DMI quirk for Lenovo Legion 7 15ASH11 Lenovo Legion 7 15ASH11 with AMD RYZEN AI MAX+ 392 (Strix Halo, ACP 7.0) uses Realtek ALC287 series codec and no any DMIC connected by ACP. All DMICs directly connet with ALC codec. Without this quirk, Input Device of Gnome Sound settings shows Internal Stereo Microphone and Digital Microphone by default. In fact, Digital Microphone of ACP doesn't work due to no connecting with ALC287 codec, the Internal Stereo Microphone as analog device based on snd_hda_intel driver can work well. Add a DMI quirk to override the flag to 0, consistent with the existing entry for the Lenovo Yoga Pro 7 15ASH11. Signed-off-by: Jackie Dong Link: https://patch.msgid.link/20260727041452.16701-1-xy-jackie@139.com Signed-off-by: Mark Brown --- sound/soc/amd/acp-config.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/acp-config.c b/sound/soc/amd/acp-config.c index 051946562725..88e4230d66c3 100644 --- a/sound/soc/amd/acp-config.c +++ b/sound/soc/amd/acp-config.c @@ -44,6 +44,13 @@ static const struct dmi_system_id acp70_acpi_flag_override_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "83W5"), }, }, + { + /* Lenovo Legion 7 15ASH11 (Strix Halo, ACP 7.0) */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "83V9"), + }, + }, { .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC"), -- cgit v1.2.3 From 0e3ea5445c228048f937ad5a944c27859a78f971 Mon Sep 17 00:00:00 2001 From: Frank Sorenson Date: Fri, 24 Jul 2026 11:30:35 -0500 Subject: cifs: consolidate time_last_write stamp into _cifsFileInfo_put() The time_last_write stamp was scattered across cifs_close(), smb2_deferred_work_close(), and the three drain functions in misc.c. This missed the case where background I/O holds the final reference after userspace close() returns, and required explicit maintenance at each close-path site. Move the smp_store_release() into _cifsFileInfo_put(), immediately before releasing open_file_lock. This single location covers all close paths unconditionally: normal close, background I/O dropping the final reference, deferred close via timer or external drain. The spinlock's store-release/load-acquire pairing with is_inode_writable() already provides the ordering guarantee documented in is_size_safe_to_change(). Remove the now-redundant stamps from cifs_close(), smb2_deferred_work_close(), and all six stamp sites in the misc.c deferred-close drain functions. Fixes: e8a8d54c2d50 ("cifs: prevent readdir from changing file size due to stale directory metadata") Signed-off-by: Frank Sorenson Reviewed-by: Paulo Alcantara (Red Hat) Signed-off-by: Steve French --- fs/smb/client/file.c | 37 ++++++++++++++++--------------------- fs/smb/client/misc.c | 51 ++++++--------------------------------------------- 2 files changed, 22 insertions(+), 66 deletions(-) diff --git a/fs/smb/client/file.c b/fs/smb/client/file.c index b279a44be729..ac89c1ba56b1 100644 --- a/fs/smb/client/file.c +++ b/fs/smb/client/file.c @@ -915,6 +915,14 @@ void _cifsFileInfo_put(struct cifsFileInfo *cifs_file, cifs_set_oplock_level(cifsi, 0); } + if (OPEN_FMODE(cifs_file->f_flags) & FMODE_WRITE) { + /* Stamp while open_file_lock is held; covers all close paths + * including background I/O. Pairs with smp_load_acquire() in + * is_size_safe_to_change(). + */ + smp_store_release(&cifsi->time_last_write, jiffies); + } + spin_unlock(&cifsi->open_file_lock); spin_unlock(&tcon->open_file_lock); @@ -1429,15 +1437,6 @@ void smb2_deferred_work_close(struct work_struct *work) cifs_del_deferred_close(cfile); cfile->deferred_close_scheduled = false; spin_unlock(&cinode->deferred_lock); - /* - * Refresh time_last_write immediately before the actual server close - * so the protection window is anchored to the real close time, not - * the earlier userspace close time stored by cifs_close(). - */ - if (OPEN_FMODE(cfile->f_flags) & FMODE_WRITE) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&cinode->time_last_write, jiffies); - } _cifsFileInfo_put(cfile, true, false); } @@ -1467,10 +1466,6 @@ int cifs_close(struct inode *inode, struct file *file) if (file->private_data != NULL) { cfile = file->private_data; file->private_data = NULL; - if (file->f_mode & FMODE_WRITE) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&cinode->time_last_write, jiffies); - } dclose = kmalloc_obj(struct cifs_deferred_close); if ((cfile->status_file_deleted == false) && (smb2_can_defer_close(inode, dclose))) { @@ -3276,13 +3271,13 @@ bool is_size_safe_to_change(struct cifsInodeInfo *cifsInode, __u64 end_of_file, * No writable handles open. Check whether we are within the attribute * cache validity window of a recent local modification. * - * For the close() path: cifs_close() calls smp_store_release() on - * time_last_write before _cifsFileInfo_put() removes the handle under - * open_file_lock. That spin_unlock() is a store-release that pairs - * with the spin_lock() (load-acquire) in is_inode_writable() above, - * so if is_inode_writable() returned false the smp_load_acquire() - * below is guaranteed to observe any time_last_write update from a - * concurrent close(). + * For the close() path: _cifsFileInfo_put() stamps time_last_write + * (via smp_store_release()) before releasing open_file_lock. That + * spin_unlock() is a store-release that pairs with the spin_lock() + * (load-acquire) in is_inode_writable() above, so if + * is_inode_writable() returned false the smp_load_acquire() below is + * guaranteed to observe any time_last_write update from a concurrent + * close(), covering all close paths including background I/O. * * For the setattr/truncate paths: those callers use smp_store_release() * directly; the smp_load_acquire() below pairs with that store. There @@ -3297,7 +3292,7 @@ bool is_size_safe_to_change(struct cifsInodeInfo *cifsInode, __u64 end_of_file, * jiffies is still close to INITIAL_JIFFIES on 32-bit systems. */ if (from_readdir) { - /* Pairs with smp_store_release() at close and truncate sites. */ + /* Pairs with smp_store_release() in _cifsFileInfo_put() and setattr. */ tlw = smp_load_acquire(&cifsInode->time_last_write); if (tlw && time_before(jiffies, tlw + cifs_sb->ctx->acregmax)) return false; diff --git a/fs/smb/client/misc.c b/fs/smb/client/misc.c index 6edebc0807ea..46e1382e8e04 100644 --- a/fs/smb/client/misc.c +++ b/fs/smb/client/misc.c @@ -525,24 +525,11 @@ cifs_close_deferred_file(struct cifsInodeInfo *cifs_inode) } spin_unlock(&cifs_inode->open_file_lock); - if (failed_cfile) { - if (OPEN_FMODE(failed_cfile->f_flags) & FMODE_WRITE) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&CIFS_I(d_inode(failed_cfile->dentry))->time_last_write, - jiffies); - } + if (failed_cfile) _cifsFileInfo_put(failed_cfile, false, false); - } list_for_each_entry_safe(tmp_list, tmp_next_list, &file_head, list) { - struct cifsFileInfo *cfile = tmp_list->cfile; - - if (OPEN_FMODE(cfile->f_flags) & FMODE_WRITE) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&CIFS_I(d_inode(cfile->dentry))->time_last_write, - jiffies); - } - _cifsFileInfo_put(cfile, false, false); + _cifsFileInfo_put(tmp_list->cfile, false, false); list_del(&tmp_list->list); kfree(tmp_list); } @@ -576,24 +563,11 @@ cifs_close_all_deferred_files(struct cifs_tcon *tcon) } spin_unlock(&tcon->open_file_lock); - if (failed_cfile) { - if (OPEN_FMODE(failed_cfile->f_flags) & FMODE_WRITE) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&CIFS_I(d_inode(failed_cfile->dentry))->time_last_write, - jiffies); - } + if (failed_cfile) _cifsFileInfo_put(failed_cfile, true, false); - } list_for_each_entry_safe(tmp_list, tmp_next_list, &file_head, list) { - struct cifsFileInfo *cfile = tmp_list->cfile; - - if (OPEN_FMODE(cfile->f_flags) & FMODE_WRITE) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&CIFS_I(d_inode(cfile->dentry))->time_last_write, - jiffies); - } - _cifsFileInfo_put(cfile, true, false); + _cifsFileInfo_put(tmp_list->cfile, true, false); list_del(&tmp_list->list); kfree(tmp_list); } @@ -663,24 +637,11 @@ void cifs_close_deferred_file_under_dentry(struct cifs_tcon *tcon, } spin_unlock(&tcon->open_file_lock); - if (failed_cfile) { - if (OPEN_FMODE(failed_cfile->f_flags) & FMODE_WRITE) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&CIFS_I(d_inode(failed_cfile->dentry))->time_last_write, - jiffies); - } + if (failed_cfile) _cifsFileInfo_put(failed_cfile, true, false); - } list_for_each_entry_safe(tmp_list, tmp_next_list, &file_head, list) { - struct cifsFileInfo *cfile = tmp_list->cfile; - - if (OPEN_FMODE(cfile->f_flags) & FMODE_WRITE) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&CIFS_I(d_inode(cfile->dentry))->time_last_write, - jiffies); - } - _cifsFileInfo_put(cfile, true, false); + _cifsFileInfo_put(tmp_list->cfile, true, false); list_del(&tmp_list->list); kfree(tmp_list); } -- cgit v1.2.3 From ecababf08905958ba8c125979c4e39fc2f1a8a05 Mon Sep 17 00:00:00 2001 From: Frank Sorenson Date: Fri, 24 Jul 2026 11:30:36 -0500 Subject: cifs: fix time_last_write stamp placement in setattr/truncate paths cifs_file_set_size() calls cifs_setsize() on success, which calls i_size_write(), updating i_size to the new value. The subsequent check attrs->ia_size != i_size_read() in both cifs_setattr_unix() and cifs_setattr_nounix() therefore always evaluates false after a successful cifs_file_set_size(), making the smp_store_release() of time_last_write dead code. The truncate path was unprotected against stale readdir size updates. Move the stamp to before the cifs_file_set_size() RPC call, guarded by attrs->ia_size != i_size_read() to exclude no-op same-size ftruncate(2) calls from stamping time_last_write unnecessarily. On the error path the stamp remains rather than being restored: restoring a stale snapshot (prev_tlw) could silently erase a concurrent _cifsFileInfo_put() close stamp if that close arrived between the READ_ONCE and the smp_store_release. readdir is suppressed until the stamp expires, which extends beyond one acregmax if the caller retries failed truncations. stat() is unaffected: the cifs_revalidate_dentry_attr() path calls cifs_fattr_to_inode() with from_readdir=false, which bypasses the time_last_write check in is_size_safe_to_change() entirely and always writes the authoritative QUERY_INFO result to i_size. Remove the now-unreachable stamp from the dead block in both functions. Fixes: e8a8d54c2d50 ("cifs: prevent readdir from changing file size due to stale directory metadata") Signed-off-by: Frank Sorenson Reviewed-by: Paulo Alcantara (Red Hat) Signed-off-by: Steve French --- fs/smb/client/inode.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/fs/smb/client/inode.c b/fs/smb/client/inode.c index b2806371bfde..808085eb0cdc 100644 --- a/fs/smb/client/inode.c +++ b/fs/smb/client/inode.c @@ -3190,6 +3190,17 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) rc = 0; if (attrs->ia_valid & ATTR_SIZE) { + if (attrs->ia_size != i_size_read(inode)) { + /* Stamp before RPC. On failure the stamp remains: restoring a + * stale snapshot could silently erase a concurrent + * _cifsFileInfo_put() close stamp. readdir is suppressed + * until the stamp expires; stat() bypasses this via the + * from_readdir=false path in is_size_safe_to_change() and + * always returns an authoritative QUERY_INFO result. + * Pairs with smp_load_acquire() in is_size_safe_to_change(). + */ + smp_store_release(&cifsInode->time_last_write, jiffies); + } rc = cifs_file_set_size(xid, direntry, full_path, open_file, attrs->ia_size); if (rc != 0) @@ -3279,8 +3290,6 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) if ((attrs->ia_valid & ATTR_SIZE) && attrs->ia_size != i_size_read(inode)) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&cifsInode->time_last_write, jiffies); truncate_setsize(inode, attrs->ia_size); netfs_resize_file(&cifsInode->netfs, attrs->ia_size, true); fscache_resize_cookie(cifs_inode_cookie(inode), attrs->ia_size); @@ -3370,6 +3379,17 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs) } if (attrs->ia_valid & ATTR_SIZE) { + if (attrs->ia_size != i_size_read(inode)) { + /* Stamp before RPC. On failure the stamp remains: restoring a + * stale snapshot could silently erase a concurrent + * _cifsFileInfo_put() close stamp. readdir is suppressed + * until the stamp expires; stat() bypasses this via the + * from_readdir=false path in is_size_safe_to_change() and + * always returns an authoritative QUERY_INFO result. + * Pairs with smp_load_acquire() in is_size_safe_to_change(). + */ + smp_store_release(&cifsInode->time_last_write, jiffies); + } rc = cifs_file_set_size(xid, direntry, full_path, cfile, attrs->ia_size); if (rc != 0) @@ -3482,8 +3502,6 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs) if ((attrs->ia_valid & ATTR_SIZE) && attrs->ia_size != i_size_read(inode)) { - /* Pairs with smp_load_acquire() in is_size_safe_to_change(). */ - smp_store_release(&cifsInode->time_last_write, jiffies); truncate_setsize(inode, attrs->ia_size); netfs_resize_file(&cifsInode->netfs, attrs->ia_size, true); fscache_resize_cookie(cifs_inode_cookie(inode), attrs->ia_size); -- cgit v1.2.3 From 22666ba1420164753d7b0f5a841986b25ace5435 Mon Sep 17 00:00:00 2001 From: Chenguang Zhao Date: Thu, 23 Jul 2026 17:26:37 +0800 Subject: forcedeth: fix UAF of txrx_stats in nv_remove nv_remove() frees the per-CPU txrx_stats before unregister_netdev(). Until unregister completes, ndo_get_stats64, the NAPI/xmit data path, and nv_close()/drain may still access txrx_stats, leading to a use-after-free. Free the stats only after unregister_netdev(). Fixes: f4b633b911fd ("forcedeth: use per cpu to collect xmit/recv statistics") Signed-off-by: Chenguang Zhao Reviewed-by: Vadim Fedorenko Reviewed-by: Zhu Yanjun Link: https://patch.msgid.link/20260723092637.2135095-1-chenguang.zhao@linux.dev Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/nvidia/forcedeth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index 5b0435d7bc39..58d3e55def48 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -6187,10 +6187,10 @@ static void nv_remove(struct pci_dev *pci_dev) struct net_device *dev = pci_get_drvdata(pci_dev); struct fe_priv *np = netdev_priv(dev); - free_percpu(np->txrx_stats); - unregister_netdev(dev); + free_percpu(np->txrx_stats); + nv_restore_mac_addr(pci_dev); /* restore any phy related changes */ -- cgit v1.2.3 From 625a2c02a1c04571232a746fe188b4d9a8d63edd Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Mon, 27 Jul 2026 21:22:17 -0300 Subject: hwmon: (adt7470) Fix fans stuck in manual mode on I2C errors During adt7470_read_temperatures(), the driver temporarily switches the PWM channels to manual mode, performs the temperature collection, and then restores the original configuration registers. However, if an I2C transaction fails at any point after entering manual mode, the function aborts and returns immediately. This leaves the configuration registers un-restored, permanently trapping the fans in manual mode. Introduce a recovery path to ensure that the original PWM configuration registers are always restored, even when intermediate I2C operations fail. Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/r/20260716213252.EACA71F000E9@smtp.kernel.org Fixes: ef67959c4253 ("hwmon: (adt7470) Convert to use regmap") Signed-off-by: Luiz Angelo Daros de Luca Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-1-598e38a46ba6@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7470.c | 40 +++++++++++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 11 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 664349756dc2..481d51617f4b 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -205,11 +205,12 @@ static inline int adt7470_write_word_data(struct adt7470_data *data, unsigned in /* Probe for temperature sensors. Assumes lock is held */ static int adt7470_read_temperatures(struct adt7470_data *data) { - unsigned long res; + struct device *dev = regmap_get_device(data->regmap); + u8 pwm[ADT7470_FAN_COUNT]; unsigned int pwm_cfg[2]; - int err; + unsigned long res; + int err, err2; int i; - u8 pwm[ADT7470_FAN_COUNT]; /* save pwm[1-4] config register */ err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(0), &pwm_cfg[0]); @@ -233,19 +234,19 @@ static int adt7470_read_temperatures(struct adt7470_data *data) err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(2), ADT7470_PWM_AUTO_MASK, 0); if (err < 0) - return err; + goto out_restore; /* write pwm control to whatever it was */ err = regmap_bulk_write(data->regmap, ADT7470_REG_PWM(0), &pwm[0], ADT7470_PWM_COUNT); if (err < 0) - return err; + goto out_restore; /* start reading temperature sensors */ err = regmap_update_bits(data->regmap, ADT7470_REG_CFG, ADT7470_T05_STB_MASK, ADT7470_T05_STB_MASK); if (err < 0) - return err; + goto out_restore; /* Delay is 200ms * number of temp sensors. */ res = msleep_interruptible((data->num_temp_sensors >= 0 ? @@ -256,13 +257,30 @@ static int adt7470_read_temperatures(struct adt7470_data *data) err = regmap_update_bits(data->regmap, ADT7470_REG_CFG, ADT7470_T05_STB_MASK, 0); if (err < 0) - return err; + goto out_restore; +out_restore: /* restore pwm[1-4] config registers */ - err = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(0), pwm_cfg[0]); - if (err < 0) - return err; - err = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]); + err2 = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(0), pwm_cfg[0]); + if (err2 < 0) { + dev_warn_ratelimited(dev, + "failed to restore PWM{1,2} config (%d)\n", + err2); + + if (!err) + err = err2; + } + + err2 = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]); + if (err2 < 0) { + dev_warn_ratelimited(dev, + "failed to restore PWM{3,4} config (%d)\n", + err2); + + if (!err) + err = err2; + } + if (err < 0) return err; -- cgit v1.2.3 From 05270bd38d9bf88a2f4c212246a8fa29f4032078 Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Mon, 27 Jul 2026 21:22:18 -0300 Subject: hwmon: (adt7470) Fix cache updated before hardware write on I2C error adt7470_temp_write() and adt7470_pwm_write() update the driver's cached values (temp_min, temp_max, pwm_input, pwm_enable) before issuing the corresponding regmap_write(), and never check whether the write succeeded before committing that update. If the I2C transaction fails, the function correctly propagates the error to the caller, but the cache silently keeps the new value, which was never actually applied to the hardware. Subsequent reads then report a value that does not match the device state. Reorder both write paths to update the cache only after a successful regmap_write(), so the cache always reflects what was actually written to the hardware. Fixes: ef67959c4253 ("hwmon: (adt7470) Convert to use regmap") Signed-off-by: Luiz Angelo Daros de Luca Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-2-598e38a46ba6@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7470.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 481d51617f4b..62ec68ea0a40 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -589,14 +589,16 @@ static int adt7470_temp_write(struct device *dev, u32 attr, int channel, long va switch (attr) { case hwmon_temp_min: mutex_lock(&data->lock); - data->temp_min[channel] = val; err = regmap_write(data->regmap, ADT7470_TEMP_MIN_REG(channel), val); + if (!err) + data->temp_min[channel] = val; mutex_unlock(&data->lock); break; case hwmon_temp_max: mutex_lock(&data->lock); - data->temp_max[channel] = val; err = regmap_write(data->regmap, ADT7470_TEMP_MAX_REG(channel), val); + if (!err) + data->temp_max[channel] = val; mutex_unlock(&data->lock); break; default: @@ -831,9 +833,10 @@ static int adt7470_pwm_write(struct device *dev, u32 attr, int channel, long val case hwmon_pwm_input: val = clamp_val(val, 0, 255); mutex_lock(&data->lock); - data->pwm[channel] = val; err = regmap_write(data->regmap, ADT7470_REG_PWM(channel), - data->pwm[channel]); + val); + if (!err) + data->pwm[channel] = val; mutex_unlock(&data->lock); break; case hwmon_pwm_enable: @@ -847,10 +850,11 @@ static int adt7470_pwm_write(struct device *dev, u32 attr, int channel, long val val--; mutex_lock(&data->lock); - data->pwm_automatic[channel] = val; err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(channel), pwm_auto_reg_mask, val ? pwm_auto_reg_mask : 0); + if (!err) + data->pwm_automatic[channel] = val; mutex_unlock(&data->lock); break; case hwmon_pwm_freq: -- cgit v1.2.3 From cb0b7f9c43b0abbd422a7e4c2c85e91db429207c Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Mon, 27 Jul 2026 21:22:19 -0300 Subject: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service. Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/r/20260716213252.EACA71F000E9@smtp.kernel.org Fixes: 89fac11cb3e7 ("adt7470: make automatic fan control really work") Signed-off-by: Luiz Angelo Daros de Luca Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-3-598e38a46ba6@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7470.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 62ec68ea0a40..0b19b0925d1c 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -509,7 +509,7 @@ static ssize_t auto_update_interval_store(struct device *dev, if (kstrtol(buf, 10, &temp)) return -EINVAL; - temp = clamp_val(temp, 0, 60000); + temp = clamp_val(temp, 500, 60000); mutex_lock(&data->lock); data->auto_update_interval = temp; -- cgit v1.2.3 From 1a18c79c4bc44cc5349c60e16b0b744dc6ec5f77 Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Mon, 27 Jul 2026 21:22:21 -0300 Subject: hwmon: (adt7470) Fix temperature alarm logic in hwmon_temp_read() During the conversion the alarm callback started interpreting the channel index as an alarm bitmask, resulting in incorrect alarm reporting. Compute the proper alarm bit instead. Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/r/20260717211224.B9E291F000E9@smtp.kernel.org Fixes: fc958a61ff6d ("hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API") Signed-off-by: Luiz Angelo Daros de Luca Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-5-598e38a46ba6@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7470.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 0b19b0925d1c..428bd1d91e70 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -110,6 +110,21 @@ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; #define ALARM2(x) ((x) << 8) +/* TEMP1..TEMP7 (ch 0..6) are, respectively BIT(0)..BIT(6) of reg 0x41 and + * 0x72, or BIT(0)..BIT(6) of data->alarm. + * TEMP8..TEMP9 (ch 7..9) are, respectively BIT(0)..BIT(2) of reg 0x42 and + * 0x73, or BIT(8)..BIT(10) of data->alarm. + */ +#define TEMP_ALARM_BIT(ch) ({ \ + typeof(ch) _ch = (ch); \ + (1 << (_ch < 7 ? _ch : _ch + 1)); \ +}) + +/* FAN1..FAN4 (ch 0..3) are respectively BIT(4)..BIT(7) in + * reg 0x42 and 0x73 or BIT(12)..BIT(15) in data->alarm. + */ +#define FAN_ALARM_BIT(ch) (1 << (12 + (ch))) + #define ADT7470_VENDOR 0x41 #define ADT7470_DEVICE 0x70 /* datasheet only mentions a revision 2 */ @@ -569,7 +584,7 @@ static int adt7470_temp_read(struct device *dev, u32 attr, int channel, long *va *val = 1000 * data->temp_max[channel]; break; case hwmon_temp_alarm: - *val = !!(data->alarm & channel); + *val = !!(data->alarm & TEMP_ALARM_BIT(channel)); break; default: return -EOPNOTSUPP; @@ -668,7 +683,7 @@ static int adt7470_fan_read(struct device *dev, u32 attr, int channel, long *val *val = 0; break; case hwmon_fan_alarm: - *val = !!(data->alarm & (1 << (12 + channel))); + *val = !!(data->alarm & FAN_ALARM_BIT(channel)); break; default: return -EOPNOTSUPP; -- cgit v1.2.3 From a3850231521b06bbbb18c8ebea100320c14a08be Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Mon, 27 Jul 2026 21:22:20 -0300 Subject: hwmon: (adt7470) Fix swapped PWM3 and PWM4 auto mode masks The ADT7470_PWM3_AUTO_MASK and ADT7470_PWM4_AUTO_MASK macros are currently defined with swapped bit values. According to Table 22 of the ADT7470 datasheet, the Fan Control Mode Configuration for register 0x69 follows the exact same bit position layout as register 0x68: - 0x68 Bit[7] corresponds to BHVR1 (PWM1) -> 0x80 - 0x68 Bit[6] corresponds to BHVR2 (PWM2) -> 0x40 - 0x69 Bit[7] corresponds to BHVR3 (PWM3) -> 0x80 - 0x69 Bit[6] corresponds to BHVR4 (PWM4) -> 0x40 Consequently, PWM3 should use mask 0x80 and PWM4 should use 0x40. This typo did not cause any functional bugs because these specific macros are never referenced in the driver code. Instead, the driver correctly applies the configuration by relying on the modulo parity of the channel index (e.g., `channel % 2`) to selectively apply either ADT7470_PWM1_AUTO_MASK (0x80) or ADT7470_PWM2_AUTO_MASK (0x40). Since the bit layout is identical between the two configuration registers, the hardware is currently configured correctly. Fix the macro definitions to reflect the datasheet accurately and prevent future bugs or confusion during code review and refactoring. As this is a purely cosmetic fix with no functional impact, a backport to stable kernels is not necessary. Fixes: 6f9703d0be16 ("hwmon: add support for adt7470") Signed-off-by: Luiz Angelo Daros de Luca Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-4-598e38a46ba6@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7470.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 428bd1d91e70..c6fc7d38d698 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -70,8 +70,8 @@ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; #define ADT7470_PWM1_AUTO_MASK 0x80 #define ADT7470_PWM_AUTO_MASK 0xC0 #define ADT7470_REG_PWM34_CFG 0x69 -#define ADT7470_PWM3_AUTO_MASK 0x40 -#define ADT7470_PWM4_AUTO_MASK 0x80 +#define ADT7470_PWM4_AUTO_MASK 0x40 +#define ADT7470_PWM3_AUTO_MASK 0x80 #define ADT7470_REG_PWM_MIN_BASE_ADDR 0x6A #define ADT7470_REG_PWM_MIN_MAX_ADDR 0x6D #define ADT7470_REG_PWM_TEMP_MIN_BASE_ADDR 0x6E -- cgit v1.2.3 From 60677cd4c28f44d5b307d3029dccece38fcce90f Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Mon, 27 Jul 2026 21:22:22 -0300 Subject: hwmon: (adt7470) Use cached PWM frequency value adt7470_pwm_read() currently ignores failures returned by pwm1_freq_get(). If the register read fails, the negative error code is returned through *val while the function itself reports success, potentially exposing a negative PWM frequency through sysfs. Fix this by using the cached PWM frequency maintained by the driver, eliminating the register access from the read path. Apart from the corrected error propagation and using the cached value, no functional change is intended. Fixes: ef67959c4253 ("hwmon: (adt7470) Convert to use regmap") Signed-off-by: Luiz Angelo Daros de Luca Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-6-598e38a46ba6@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7470.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index c6fc7d38d698..1fbca4869b7b 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -182,6 +182,7 @@ struct adt7470_data { u8 pwm_min[ADT7470_PWM_COUNT]; s8 pwm_tmin[ADT7470_PWM_COUNT]; u8 pwm_auto_temp[ADT7470_PWM_COUNT]; + u32 pwm_freq; struct task_struct *auto_update; unsigned int auto_update_interval; @@ -756,7 +757,7 @@ static ssize_t force_pwm_max_store(struct device *dev, } /* These are the valid PWM frequencies to the nearest Hz */ -static const int adt7470_freq_map[] = { +static const u32 adt7470_freq_map[] = { 11, 15, 22, 29, 35, 44, 59, 88, 1400, 22500 }; @@ -796,7 +797,7 @@ static int adt7470_pwm_read(struct device *dev, u32 attr, int channel, long *val *val = 1 + data->pwm_automatic[channel]; break; case hwmon_pwm_freq: - *val = pwm1_freq_get(dev); + *val = data->pwm_freq; break; default: return -EOPNOTSUPP; @@ -809,12 +810,14 @@ static int pwm1_freq_set(struct device *dev, long freq) { struct adt7470_data *data = dev_get_drvdata(dev); unsigned int low_freq = ADT7470_CFG_LF; + u32 closest_freq; int index; int err; /* Round the user value given to the closest available frequency */ index = find_closest(freq, adt7470_freq_map, ARRAY_SIZE(adt7470_freq_map)); + closest_freq = adt7470_freq_map[index]; if (index >= 8) { index -= 8; @@ -832,6 +835,10 @@ static int pwm1_freq_set(struct device *dev, long freq) err = regmap_update_bits(data->regmap, ADT7470_REG_CFG_2, ADT7470_FREQ_MASK, index << ADT7470_FREQ_SHIFT); + if (err < 0) + goto out; + + data->pwm_freq = closest_freq; out: mutex_unlock(&data->lock); @@ -1285,6 +1292,7 @@ static int adt7470_probe(struct i2c_client *client) struct device *dev = &client->dev; struct adt7470_data *data; struct device *hwmon_dev; + int freq_val; int err; data = devm_kzalloc(dev, sizeof(struct adt7470_data), GFP_KERNEL); @@ -1309,6 +1317,14 @@ static int adt7470_probe(struct i2c_client *client) if (err < 0) return err; + freq_val = pwm1_freq_get(dev); + if (freq_val <= 0) { + err = freq_val < 0 ? freq_val : -EINVAL; + return err; + } + + data->pwm_freq = (u32)freq_val; + /* Register sysfs hooks */ hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, &adt7470_chip_info, -- cgit v1.2.3 From 1b46fe9dc8f8de59310f37e6c5e5c0e05ded46c3 Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Mon, 27 Jul 2026 21:22:23 -0300 Subject: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once. Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/r/20260727034929.E29B71F000E9@smtp.kernel.org/ Fixes: fc958a61ff6d ("hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API") Signed-off-by: Luiz Angelo Daros de Luca Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-7-598e38a46ba6@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7470.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 1fbca4869b7b..772d2a409bb5 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -660,36 +660,33 @@ static ssize_t alarm_mask_store(struct device *dev, static int adt7470_fan_read(struct device *dev, u32 attr, int channel, long *val) { struct adt7470_data *data = adt7470_update_device(dev); + u16 fan_data; if (IS_ERR(data)) return PTR_ERR(data); switch (attr) { case hwmon_fan_input: - if (FAN_DATA_VALID(data->fan[channel])) - *val = FAN_PERIOD_TO_RPM(data->fan[channel]); - else - *val = 0; + fan_data = READ_ONCE(data->fan[channel]); break; case hwmon_fan_min: - if (FAN_DATA_VALID(data->fan_min[channel])) - *val = FAN_PERIOD_TO_RPM(data->fan_min[channel]); - else - *val = 0; + fan_data = READ_ONCE(data->fan_min[channel]); break; case hwmon_fan_max: - if (FAN_DATA_VALID(data->fan_max[channel])) - *val = FAN_PERIOD_TO_RPM(data->fan_max[channel]); - else - *val = 0; + fan_data = READ_ONCE(data->fan_max[channel]); break; case hwmon_fan_alarm: *val = !!(data->alarm & FAN_ALARM_BIT(channel)); - break; + return 0; default: return -EOPNOTSUPP; } + if (FAN_DATA_VALID(fan_data)) + *val = FAN_PERIOD_TO_RPM(fan_data); + else + *val = 0; + return 0; } -- cgit v1.2.3 From 92413f439d1ec5e55b73ede8d66a7b971cbd1ced Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Mon, 27 Jul 2026 21:22:24 -0300 Subject: hwmon: (adt7470) Fix PWM auto temp state array and bounds check In pwm_auto_temp_store(), the parsed user input was missing bounds checks, allowing values > 0xF to overflow into the adjacent channel's bits. Furthermore, the value was being incorrectly written to the pwm_automatic state array instead of pwm_auto_temp. Fix this by rejecting values > 0xF with -EINVAL, and assigning the value to the correct array only after a successful I2C write. Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/all/20260727034932.0B7C41F000E9@smtp.kernel.org/#t Fixes: 6f9703d0be16 ("hwmon: add support for adt7470") Signed-off-by: Luiz Angelo Daros de Luca Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-8-598e38a46ba6@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7470.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 772d2a409bb5..c45b984c02e6 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -1049,8 +1049,10 @@ static ssize_t pwm_auto_temp_store(struct device *dev, if (temp < 0) return temp; + if (temp > 0xF) + return -EINVAL; + mutex_lock(&data->lock); - data->pwm_automatic[attr->index] = temp; if (!(attr->index % 2)) { mask = 0xF0; @@ -1061,6 +1063,9 @@ static ssize_t pwm_auto_temp_store(struct device *dev, } err = regmap_update_bits(data->regmap, pwm_auto_reg, mask, val); + if (!err) + data->pwm_auto_temp[attr->index] = temp; + mutex_unlock(&data->lock); return err < 0 ? err : count; -- cgit v1.2.3 From d211028bac1bd0fff0026bfa2a8328e5b78cd0e6 Mon Sep 17 00:00:00 2001 From: Aswin Karuvally Date: Thu, 23 Jul 2026 16:00:50 +0200 Subject: s390/qeth: Check CAP_NET_ADMIN for private ioctls Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL, SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN capable check to ensure unprivileged users cannot invoke them. Fixes: 18787eeebd71 ("qeth: use ndo_siocdevprivate") Cc: stable@vger.kernel.org Suggested-by: Christian Borntraeger Reviewed-by: Christian Borntraeger Reviewed-by: Alexandra Winter Signed-off-by: Aswin Karuvally Link: https://patch.msgid.link/20260723140050.762991-1-aswin@linux.ibm.com Signed-off-by: Jakub Kicinski --- drivers/s390/net/qeth_core_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 20fb0d2e02a9..f18eed9df3c7 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -6525,6 +6525,9 @@ int qeth_siocdevprivate(struct net_device *dev, struct ifreq *rq, void __user *d struct qeth_card *card = dev->ml_priv; int rc = 0; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + switch (cmd) { case SIOC_QETH_ADP_SET_SNMP_CONTROL: rc = qeth_snmp_command(card, data); -- cgit v1.2.3 From 6fb7b769d6ed6d1d2e02af4a80e57a2477f35086 Mon Sep 17 00:00:00 2001 From: Yun Lu Date: Tue, 21 Jul 2026 10:38:36 +0800 Subject: rtase: fix double free of multi-frag skb on DMA map failure In rtase_start_xmit(), when the head buffer DMA mapping fails after rtase_xmit_frags() has mapped all fragments, the error path clears the fragment descriptors with rtase_tx_clear_range(), which frees the skb through the last-frag slot and accounts tx_dropped. Control then falls through to the common error label, which frees the same skb a second time and counts it again. Return right after clearing the fragments when the skb owns frags; the no-frag case still drops through and frees the head skb once. Fixes: d6e882b89fdf ("rtase: Implement .ndo_start_xmit function") Signed-off-by: Yun Lu Reviewed-by: Jacob Keller Reviewed-by: Justin Lai Link: https://patch.msgid.link/20260721023836.6691-1-luyun_611@163.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/rtase/rtase_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c index 4168ad9e48ea..e3cd4f7c1380 100644 --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c @@ -1623,6 +1623,9 @@ static netdev_tx_t rtase_start_xmit(struct sk_buff *skb, err_dma_1: ring->skbuff[entry] = NULL; rtase_tx_clear_range(ring, ring->cur_idx + 1, frags); + if (frags) + /* the frags were cleared above, along with the skb */ + return NETDEV_TX_OK; err_dma_0: tp->stats.tx_dropped++; -- cgit v1.2.3 From 97ac08560d236ca17f6606d9e671118e5eae5721 Mon Sep 17 00:00:00 2001 From: Eric Joyner Date: Wed, 22 Jul 2026 21:13:42 -0700 Subject: ethtool: Embed FEC hist ranges as buffer in struct When a driver's .get_fec_stats() handler is called and the driver supports FEC histogram stats, the driver supplies the histogram bin ranges via a pointer. This pointer is assigned while under the netdev ops lock in fec_prepare_data(), but the actual data is only read after the lock is released; so this allows the driver to change the ranges (e.g. from another .get_fec_stats() call) while the current call chain is reading them in fec_fill_reply(). Fix this by adding an ethtool core-owned buffer, ranges_buf, to struct ethtool_fec_hist. Drivers whose ranges are built dynamically (currently just mlx5) fill ranges_buf and then point the existing ranges pointer at it, giving ethtool a consistent copy that stays valid after the netdev ops lock is dropped and later in fec_fill_reply(). Drivers whose ranges are compile-time constants (bnxt, netdevsim) are unaffected by the potential race and keep setting the existing ranges pointer to their constant array, without making copies. Fixes: cc2f08129925 ("ethtool: add FEC bins histogram report") Signed-off-by: Eric Joyner Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20260723041342.39238-1-eric.joyner@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 - drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 ------- drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 19 +++++++++---------- include/linux/ethtool.h | 1 + 4 files changed, 10 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index d507289096c2..6867a5aed42c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -984,7 +984,6 @@ struct mlx5e_priv { struct mlx5e_mqprio_rl *mqprio_rl; struct dentry *dfs_root; struct mlx5_devcom_comp_dev *devcom; - struct ethtool_fec_hist_range *fec_ranges; }; static inline u16 mlx5e_stats_nch_read(const struct mlx5e_priv *priv) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index c1acb9012d3f..7d47a1da8b6b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -6415,14 +6415,8 @@ int mlx5e_priv_init(struct mlx5e_priv *priv, if (!priv->channel_stats) goto err_free_tx_rates; - priv->fec_ranges = kzalloc_objs(*priv->fec_ranges, ETHTOOL_FEC_HIST_MAX); - if (!priv->fec_ranges) - goto err_free_channel_stats; - return 0; -err_free_channel_stats: - kfree(priv->channel_stats); err_free_tx_rates: kfree(priv->tx_rates); err_free_txq2sq_stats: @@ -6447,7 +6441,6 @@ void mlx5e_priv_cleanup(struct mlx5e_priv *priv) if (!priv->mdev) return; - kfree(priv->fec_ranges); for (i = 0; i < priv->stats_nch; i++) kvfree(priv->channel_stats[i]); kfree(priv->channel_stats); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index de38b60806c2..e7e6db7f6bf1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -1550,7 +1550,7 @@ static bool fec_rs_validate_hist_type(int mode, int hist_type) static u8 fec_rs_histogram_fill_ranges(struct mlx5e_priv *priv, int mode, - const struct ethtool_fec_hist_range **ranges) + struct ethtool_fec_hist_range *ranges) { struct mlx5_core_dev *mdev = priv->mdev; u32 out[MLX5_ST_SZ_DW(pphcr_reg)] = {0}; @@ -1558,8 +1558,6 @@ fec_rs_histogram_fill_ranges(struct mlx5e_priv *priv, int mode, int sz = MLX5_ST_SZ_BYTES(pphcr_reg); u8 hist_type, num_of_bins; - memset(priv->fec_ranges, 0, - ETHTOOL_FEC_HIST_MAX * sizeof(*priv->fec_ranges)); MLX5_SET(pphcr_reg, in, local_port, 1); if (mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPHCR, 0, 0)) return 0; @@ -1575,12 +1573,11 @@ fec_rs_histogram_fill_ranges(struct mlx5e_priv *priv, int mode, for (int i = 0; i < num_of_bins; i++) { void *bin_range = MLX5_ADDR_OF(pphcr_reg, out, bin_range[i]); - priv->fec_ranges[i].high = MLX5_GET(bin_range_layout, bin_range, - high_val); - priv->fec_ranges[i].low = MLX5_GET(bin_range_layout, bin_range, - low_val); + ranges[i].high = MLX5_GET(bin_range_layout, bin_range, + high_val); + ranges[i].low = MLX5_GET(bin_range_layout, bin_range, + low_val); } - *ranges = priv->fec_ranges; return num_of_bins; } @@ -1622,10 +1619,12 @@ static void fec_set_histograms_stats(struct mlx5e_priv *priv, int mode, case MLX5E_FEC_LLRS_272_257_1: case MLX5E_FEC_RS_544_514_INTERLEAVED_QUAD: num_of_bins = - fec_rs_histogram_fill_ranges(priv, mode, &hist->ranges); - if (num_of_bins) + fec_rs_histogram_fill_ranges(priv, mode, hist->ranges_buf); + if (num_of_bins) { + hist->ranges = hist->ranges_buf; return fec_rs_histogram_fill_stats(priv, num_of_bins, hist); + } break; default: return; diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 5d491a98265e..12683b5d125e 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -562,6 +562,7 @@ struct ethtool_fec_hist { u64 per_lane[ETHTOOL_MAX_LANES]; } values[ETHTOOL_FEC_HIST_MAX]; const struct ethtool_fec_hist_range *ranges; + struct ethtool_fec_hist_range ranges_buf[ETHTOOL_FEC_HIST_MAX]; }; /** * struct ethtool_fec_stats - statistics for IEEE 802.3 FEC -- cgit v1.2.3 From fa724e235cfdb0fb0bb427d0f9dfe864ae27403e Mon Sep 17 00:00:00 2001 From: Frank Sorenson Date: Sat, 25 Jul 2026 21:04:44 +0000 Subject: cifs: add fscache_resize_cookie() to cifs_setsize() Several code paths update the VFS inode size by calling netfs_resize_file() and cifs_setsize(), but omit the corresponding fscache_resize_cookie() call, leaving the fscache cookie out of sync with the actual file size: - cifs_file_set_size() in inode.c: server-side truncation via setattr - cifs_do_truncate() in file.c: truncates to zero on O_TRUNC open - smb2_duplicate_extents() in smb2ops.c: file clone extending EOF - smb3_simple_falloc() in smb2ops.c: two branches that extend EOF via write-range and SMB2_set_eof respectively Since every caller of cifs_setsize() must resize the fscache cookie, add the call to cifs_setsize() itself, consistent with how truncate_pagecache() is already consolidated there. Fixes: 70431bfd825d ("cifs: Support fscache indexing rewrite") Fixes: 93a43155127f ("cifs: Fix missing set of remote_i_size") Fixes: 110fee6b9bb5 ("smb: client: fix missing timestamp updates with O_TRUNC") Fixes: 7a06d3b816d7 ("smb/client: emulate small EOF-extending mode 0 fallocate ranges") Cc: stable@vger.kernel.org Cc: David Howells Cc: Paulo Alcantara Cc: Huiwen He Signed-off-by: Frank Sorenson Reviewed-by: Paulo Alcantara Signed-off-by: Steve French --- fs/smb/client/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/smb/client/inode.c b/fs/smb/client/inode.c index 808085eb0cdc..0afff761aab9 100644 --- a/fs/smb/client/inode.c +++ b/fs/smb/client/inode.c @@ -3059,6 +3059,7 @@ void cifs_setsize(struct inode *inode, loff_t offset) inode_set_mtime_to_ts(inode, inode_set_ctime_current(inode)); truncate_pagecache(inode, offset); netfs_wait_for_outstanding_io(inode); + fscache_resize_cookie(cifs_inode_cookie(inode), offset); } int cifs_file_set_size(const unsigned int xid, struct dentry *dentry, -- cgit v1.2.3 From aec49a34d928a0ecdea85bd9f6b4114b668b68b8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 Jul 2026 18:52:09 -0700 Subject: ata: libata: avoid kernel-doc warnings Modify comments to prevent kernel-doc warnings: - use "/*" for a non-kernel-doc comment - add a Returns: section for ata_id_major_version() Warning: include/linux/ata.h:770 Cannot find identifier on line: * Warning: include/linux/ata.h:782 function parameter 'id' not described in 'ata_id_sct_data_tables' Warning: include/linux/ata.h:782 expecting prototype for Word(). Prototype was for ata_id_sct_data_tables() instead Warning: include/linux/ata.h:820 No description found for return value of 'ata_id_major_version' Signed-off-by: Randy Dunlap Signed-off-by: Damien Le Moal --- include/linux/ata.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/ata.h b/include/linux/ata.h index 8fd48bcb2a46..7daad4cad985 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -762,8 +762,7 @@ static inline bool ata_id_sense_reporting_enabled(const u16 *id) return id[ATA_ID_COMMAND_SET_4] & BIT(6); } -/** - * +/* * Word: 206 - SCT Command Transport * 15:12 - Vendor Specific * 11:6 - Reserved @@ -810,8 +809,9 @@ static inline bool ata_id_sct_supported(const u16 *id) * * The practical impact of this is that ata_id_major_version cannot * reliably report on drives below ATA3. + * + * Returns: major version of ATA drive level or %0 if unknown */ - static inline unsigned int ata_id_major_version(const u16 *id) { unsigned int mver; -- cgit v1.2.3 From 1e024d2b41ee32bc06818f7f09a3562c58842cf9 Mon Sep 17 00:00:00 2001 From: Matt Vollrath Date: Fri, 24 Jul 2026 03:39:42 -0400 Subject: ata: libata-eh: Increase STANDBY IMMEDIATE timeout Correct a previous change (see Fixes) which reduced the standby timeout from 30 to 5 seconds. Increase it to 15 seconds. I was troubleshooting an error spotted during system suspend: [ 1217.152867] ata1.00: Entering standby power mode [ 1222.322948] ata1.00: qc timeout after 5000 msecs (cmd 0xe0) [ 1222.324010] ata1.00: STANDBY IMMEDIATE failed (err_mask=0x4) This drive is a Samsung 870 EVO SSD in good SMART standing, and I wasn't aware of any reason it should be taking so long to standby. The issue is intermittent, but I observed it sometimes taking 7 seconds to manually standby. I assume this was interruption of background maintenance after a power outage. As a desktop user, I would prefer to wait the extra 2 seconds at suspend to let the drive finish its business rather than drop the rails from under it. The change from 30 to 5 seconds was implicit when switching suspend from START STOP UNIT to an internal command with no timeout table entry. No reason was stated for the change. Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Cc: stable@vger.kernel.org Signed-off-by: Matt Vollrath Assisted-by: Claude:claude-5-fable Signed-off-by: Damien Le Moal --- drivers/ata/libata-eh.c | 8 ++++++++ include/linux/libata.h | 2 +- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 05df7ea6954a..46947ed0c657 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -106,6 +106,12 @@ static const unsigned int ata_eh_flush_timeouts[] = { UINT_MAX, }; +static const unsigned int ata_eh_standby_timeouts[] = { + 15000, /* Some drives may be slow to standby */ + /* but don't hold up a suspend too long waiting for them */ + UINT_MAX, +}; + static const unsigned int ata_eh_other_timeouts[] = { 5000, /* same rationale as identify timeout */ 10000, /* ditto */ @@ -147,6 +153,8 @@ ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { .timeouts = ata_eh_other_timeouts, }, { .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT), .timeouts = ata_eh_flush_timeouts }, + { .commands = CMDS(ATA_CMD_STANDBYNOW1), + .timeouts = ata_eh_standby_timeouts }, { .commands = CMDS(ATA_CMD_VERIFY), .timeouts = ata_eh_reset_timeouts }, }; diff --git a/include/linux/libata.h b/include/linux/libata.h index 96e626d6a7ca..6c0d385b2cde 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -425,7 +425,7 @@ enum { /* This should match the actual table size of * ata_eh_cmd_timeout_table in libata-eh.c. */ - ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 8, + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 9, /* User visible DMA mask for DMA control. DO NOT renumber. */ ATA_DMA_MASK_ATA = (1 << 0), /* DMA on ATA Disk */ -- cgit v1.2.3 From 810d07fb4cf7577847f85a6fd6273b69cad8d580 Mon Sep 17 00:00:00 2001 From: Vaibhav Jain Date: Wed, 8 Jul 2026 07:28:00 +0530 Subject: powerpc/pseries: Ensure vpa,slb_shadow & dtl are unregistered during crash Currently pseries_kexec_cpu_down() skips unregistering vpa, slb_shadow and dtl areas during a crash and kexec shutdown path. It was done to avoid doing an HCALL while crashing. However recently Anushree reported that during kernel crash while the kdump kernel was coming up, Hypervisor reported invalid values for 'vpa.yield_count' while it dispatching L2-KVM Guest vcpus. The error manifested as debug build Hypervisor assert triggering to indicate possible VPA corruption. Looking at the kexec cpu offline path it was discovered that during crash kernel doesn't unregister the VPA/SLB-Shadow/DTL area with Hypervisor. Instead it re-allocates and re-registers these areas for cpus during boot. During kexec boot the previously allocated areas can get overwritten with new content without hypervisor knowledge. This creates a small window where while kexec kernel boots and the L2-VCPUs are being dispatched, Hypervisor may try to read/write to a wrong memory area which previously belonged to older VPA. Fix this possible race and memory corruption by updating pseries_kexec_cpu_down() to also unregister vpa,slb_shadow & dtl areas during a kernel crash. Signed-off-by: Vaibhav Jain Tested-by: Anushree Mathur Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260708015802.274271-1-vaibhav@linux.ibm.com --- arch/powerpc/platforms/pseries/kexec.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c index 431be156ca9b..29f7c97ff193 100644 --- a/arch/powerpc/platforms/pseries/kexec.c +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -20,12 +20,15 @@ void pseries_kexec_cpu_down(int crash_shutdown, int secondary) { /* - * Don't risk a hypervisor call if we're crashing - * XXX: Why? The hypervisor is not crashing. It might be better - * to at least attempt unregister to avoid the hypervisor stepping - * on our memory. + * Ensure vpa/slb_shadow/dtl cleanup even while we are crashing. + * Why? The hypervisor is not crashing so at least attempt unregister to + * avoid the hypervisor stepping on our memory. If hypervisor or kexec + * kernel steps on the old memory allocated to these areas before the + * new kexec-kernel happens to allocate and register new areas, + * the hypervisor will see invalid content which may cause + * unexpected behavior. */ - if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { int ret; int cpu = smp_processor_id(); int hwcpu = hard_smp_processor_id(); -- cgit v1.2.3 From 8f45abd50aaa4155a72ec539f371dafb039786df Mon Sep 17 00:00:00 2001 From: Vaibhav Jain Date: Wed, 8 Jul 2026 07:28:40 +0530 Subject: powerpc/pseries: Skip vpa_init() for boot cpu in smp_setup_cpu() During pSeries_setup_arch(), VPA for boot-cpu is first to be initialized. However later in the boot, smp_setup_cpu() is called for setting up VPA on boot and secondary cpus that were brought online. This results in vpa_init() being called twice for boot-cpu and three redundant H_REGISTER_VPA hcalls being made to the hypervisor. Fix this by adding an extra condition in smp_set_cpu() to call vpa_init() only on non boot-cpus. Signed-off-by: Vaibhav Jain Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260708015842.274690-1-vaibhav@linux.ibm.com --- arch/powerpc/platforms/pseries/smp.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index db99725e752b..bf3d7ed3be01 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -128,7 +128,12 @@ static void smp_setup_cpu(int cpu) else if (cpu != boot_cpuid) xics_setup_cpu(); - if (firmware_has_feature(FW_FEATURE_SPLPAR)) + /* + * Initialize VPA on non-boot cpus since boot-cpu vpa was + * already initialized in pSeries_setup_arch() + */ + if (firmware_has_feature(FW_FEATURE_SPLPAR) && + cpu != boot_cpuid) vpa_init(cpu); cpumask_clear_cpu(cpu, of_spin_mask); -- cgit v1.2.3 From bddf7540099bf653eaea339e886add6f62555cf3 Mon Sep 17 00:00:00 2001 From: "Mukesh Kumar Chaurasiya (IBM)" Date: Tue, 7 Jul 2026 22:54:30 +0530 Subject: powerpc/970: fix nap return address corruption on async interrupt exit On PowerMac G5 (PPC970, CONFIG_PPC_970_NAP) the system panics shortly after boot with symptoms including instruction fetch faults, kernel data access faults, and stack corruption, predominantly on SMP and always somewhere inside softirq processing. The PPC970 idle path works by setting _TLF_NAPPING in the current thread's local flags before entering the MSR_POW nap loop. When any async interrupt wakes the CPU, nap_adjust_return() is expected to detect _TLF_NAPPING, clear it, and rewrite regs->NIP to power4_idle_nap_return so that the interrupt returns cleanly to the caller of power4_idle_nap() rather than back into the nap spin loop. DEFINE_INTERRUPT_HANDLER_ASYNC generates the following sequence: irq_enter_rcu(); ____func(regs); /* timer_interrupt / do_IRQ body */ irq_exit_rcu(); /* softirqs run here, irqs re-enabled */ arch_interrupt_async_exit_prepare(regs); /* nap_adjust_return was here */ irqentry_exit(regs, state); irq_exit_rcu() calls invoke_softirq() -> do_softirq_own_stack(), which runs softirqs with hardware interrupts re-enabled. A nested async interrupt can therefore arrive while _TLF_NAPPING is still set. That nested interrupt reaches nap_adjust_return() in its own arch_interrupt_async_exit_prepare() call, finds _TLF_NAPPING set, and redirects *its own* regs->NIP to power4_idle_nap_return. Returning via that blr with an unrelated LR on the softirq stack jumps to a garbage address, causing the observed crashes. The comment that previously lived in arch_interrupt_async_exit_prepare() even described this exact hazard ("must come before irq_exit()"), but nap_adjust_return() was placed after irq_exit_rcu() in the macro, so the protection was never effective. Fix this by calling nap_adjust_return() inside DEFINE_INTERRUPT_HANDLER_ASYNC immediately before irq_exit_rcu(), ensuring _TLF_NAPPING is cleared and regs->NIP is adjusted before any code that can re-enable interrupts or invoke softirqs runs. Move the explanatory comment into nap_adjust_return() itself and remove it from arch_interrupt_async_exit_prepare(). Fixes: bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature") Closes: https://lore.kernel.org/all/87wlvazrdy.fsf@igel.home/ Reported-by: Andreas Schwab Signed-off-by: Mukesh Kumar Chaurasiya (IBM) Tested-by: John Ogness Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260707172430.790040-1-mkchauras@gmail.com --- arch/powerpc/include/asm/entry-common.h | 15 +++++++-------- arch/powerpc/include/asm/interrupt.h | 1 + 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/include/asm/entry-common.h b/arch/powerpc/include/asm/entry-common.h index fc636c42e89a..c5adb5006361 100644 --- a/arch/powerpc/include/asm/entry-common.h +++ b/arch/powerpc/include/asm/entry-common.h @@ -66,6 +66,13 @@ static inline void srr_regs_clobbered(void) static inline void nap_adjust_return(struct pt_regs *regs) { #ifdef CONFIG_PPC_970_NAP + /* + * Adjust the nap return address before irq_exit_rcu(). irq_exit_rcu() + * may invoke softirqs with interrupts re-enabled, allowing a nested + * async interrupt to arrive. If _TLF_NAPPING is still set at that + * point, the nested interrupt would erroneously redirect its own + * return address to power4_idle_nap_return, corrupting the stack. + */ if (unlikely(test_thread_local_flags(_TLF_NAPPING))) { /* Can avoid a test-and-clear because NMIs do not call this */ clear_thread_local_flags(_TLF_NAPPING); @@ -286,14 +293,6 @@ static inline void arch_interrupt_async_enter_prepare(struct pt_regs *regs) static inline void arch_interrupt_async_exit_prepare(struct pt_regs *regs) { - /* - * Adjust at exit so the main handler sees the true NIA. This must - * come before irq_exit() because irq_exit can enable interrupts, and - * if another interrupt is taken before nap_adjust_return has run - * here, then that interrupt would return directly to idle nap return. - */ - nap_adjust_return(regs); - arch_interrupt_exit_prepare(regs); } diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h index fb42a664ae54..1b45a49e9bed 100644 --- a/arch/powerpc/include/asm/interrupt.h +++ b/arch/powerpc/include/asm/interrupt.h @@ -246,6 +246,7 @@ interrupt_handler void func(struct pt_regs *regs) \ instrumentation_begin(); \ irq_enter_rcu(); \ ____##func (regs); \ + nap_adjust_return(regs); \ irq_exit_rcu(); \ instrumentation_end(); \ arch_interrupt_async_exit_prepare(regs); \ -- cgit v1.2.3 From 263e5159e00aa46bf26f3496ff7aae1fc9a6c826 Mon Sep 17 00:00:00 2001 From: "Mukesh Kumar Chaurasiya (IBM)" Date: Fri, 24 Jul 2026 01:18:09 +0530 Subject: powerpc: Fix exit_flags field placement in pt_regs for ptrace Commit d7a6797e0bc1 ("powerpc: add exit_flags field in pt_regs") added the exit_flags field to struct pt_regs to pass internal exit control flags (e.g. _TIF_RESTOREALL) from syscall_exit_prepare() to the low-level assembly exit path. However, the field was placed in a way that was visible to userspace tools such as strace via PTRACE_GETREGS, or caused a struct layout or size regression observable through ptrace. The field is purely kernel-internal and must not be exposed beyond the user_pt_regs boundary. Move exit_flags into struct thread_info where it is only accessible to the kernel, and keep it out of the ptrace-visible register window entirely. Fixes: d7a6797e0bc1 ("powerpc: add exit_flags field in pt_regs") Reported-by: Dmitry V. Levin Closes: https://lore.kernel.org/all/20260722070155.GA11808@strace.io/ Signed-off-by: Mukesh Kumar Chaurasiya (IBM) Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260723194809.4046600-1-mkchauras@gmail.com --- arch/powerpc/include/asm/ptrace.h | 3 --- arch/powerpc/include/asm/thread_info.h | 1 + arch/powerpc/include/uapi/asm/ptrace.h | 14 +++++--------- arch/powerpc/kernel/interrupt.c | 32 +++++++++++++++++++------------- arch/powerpc/kernel/ptrace/ptrace.c | 1 - arch/powerpc/kernel/signal.c | 2 +- 6 files changed, 26 insertions(+), 27 deletions(-) diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index fdeb97421785..d53c4dd4d8b6 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -53,9 +53,6 @@ struct pt_regs unsigned long esr; }; unsigned long result; - unsigned long exit_flags; - /* Maintain 16 byte interrupt stack alignment */ - unsigned long __pt_regs_pad[3]; }; }; #if defined(CONFIG_PPC64) || defined(CONFIG_PPC_KUAP) diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index ee3b9adb5b67..0487e94d3416 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -57,6 +57,7 @@ struct thread_info { #ifdef CONFIG_SMP unsigned int cpu; #endif + unsigned long exit_flags; /* Exit Flags for entry/exit */ unsigned long syscall_work; /* SYSCALL_WORK_ flags */ unsigned long local_flags; /* private flags for thread */ #ifdef CONFIG_LIVEPATCH_64 diff --git a/arch/powerpc/include/uapi/asm/ptrace.h b/arch/powerpc/include/uapi/asm/ptrace.h index a393b7f2760a..01e630149d48 100644 --- a/arch/powerpc/include/uapi/asm/ptrace.h +++ b/arch/powerpc/include/uapi/asm/ptrace.h @@ -55,8 +55,6 @@ struct pt_regs unsigned long dar; /* Fault registers */ unsigned long dsisr; /* on 4xx/Book-E used for ESR */ unsigned long result; /* Result of a system call */ - unsigned long exit_flags; /* System call exit flags */ - unsigned long __pt_regs_pad[3]; /* Maintain 16 byte interrupt stack alignment */ }; #endif /* __ASSEMBLER__ */ @@ -116,12 +114,10 @@ struct pt_regs #define PT_DAR 41 #define PT_DSISR 42 #define PT_RESULT 43 -#define PT_EXIT_FLAGS 44 -#define PT_PAD 47 /* 3 times */ -#define PT_DSCR 48 -#define PT_REGS_COUNT 48 +#define PT_DSCR 44 +#define PT_REGS_COUNT 44 -#define PT_FPR0 (PT_REGS_COUNT + 4) /* each FP reg occupies 2 slots in this space */ +#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ #ifndef __powerpc64__ @@ -133,7 +129,7 @@ struct pt_regs #define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */ -#define PT_VR0 (PT_FPSCR + 2) /* <82> each Vector reg occupies 2 slots in 64-bit */ +#define PT_VR0 82 /* each Vector reg occupies 2 slots in 64-bit */ #define PT_VSCR (PT_VR0 + 32*2 + 1) #define PT_VRSAVE (PT_VR0 + 33*2) @@ -141,7 +137,7 @@ struct pt_regs /* * Only store first 32 VSRs here. The second 32 VSRs in VR0-31 */ -#define PT_VSR0 (PT_VRSAVE + 2) /* each VSR reg occupies 2 slots in 64-bit */ +#define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */ #define PT_VSR31 (PT_VSR0 + 2*31) #endif /* __powerpc64__ */ diff --git a/arch/powerpc/kernel/interrupt.c b/arch/powerpc/kernel/interrupt.c index f04978080837..5b88bf72786c 100644 --- a/arch/powerpc/kernel/interrupt.c +++ b/arch/powerpc/kernel/interrupt.c @@ -89,15 +89,17 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3, long scv) { unsigned long ti_flags; + unsigned long ret = 0; bool is_not_scv = !IS_ENABLED(CONFIG_PPC_BOOK3S_64) || !scv; kuap_assert_locked(); regs->result = r3; - regs->exit_flags = 0; - ti_flags = read_thread_flags(); + /* Clear exit_flags so only flags set during this exit are visible */ + current->thread_info.exit_flags = 0; + ti_flags = read_thread_flags(); if (unlikely(r3 >= (unsigned long)-MAX_ERRNO) && is_not_scv) { if (likely(!(ti_flags & (_TIF_NOERROR | _TIF_RESTOREALL)))) { r3 = -r3; @@ -107,7 +109,7 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3, if (unlikely(ti_flags & _TIF_PERSYSCALL_MASK)) { if (ti_flags & _TIF_RESTOREALL) - regs->exit_flags = _TIF_RESTOREALL; + ret = _TIF_RESTOREALL; else regs->gpr[3] = r3; clear_bits(_TIF_PERSYSCALL_MASK, ¤t_thread_info()->flags); @@ -116,7 +118,7 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3, } if (unlikely(ti_flags & _TIF_SYSCALL_DOTRACE)) { - regs->exit_flags |= _TIF_RESTOREALL; + ret |= _TIF_RESTOREALL; } syscall_exit_to_user_mode(regs); @@ -132,17 +134,19 @@ again: /* Restore user access locks last */ kuap_user_restore(regs); - + ret |= current->thread_info.exit_flags; #ifdef CONFIG_PPC64 - regs->exit_result = regs->exit_flags; + regs->exit_result = ret; #endif - return regs->exit_flags; + return ret; } #ifdef CONFIG_PPC64 notrace unsigned long syscall_exit_restart(unsigned long r3, struct pt_regs *regs) { + unsigned long ret; + /* * This is called when detecting a soft-pending interrupt as well as * an alternate-return interrupt. So we can't just have the alternate @@ -167,9 +171,11 @@ again: } kuap_user_restore(regs); - regs->exit_result |= regs->exit_flags; + ret = current_thread_info()->exit_flags & _TIF_RESTOREALL; + current_thread_info()->exit_flags &= ~_TIF_RESTOREALL; + regs->exit_result |= ret; - return regs->exit_result; + return ret; } #endif @@ -186,8 +192,10 @@ notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs) */ kuap_assert_locked(); + /* Clear exit_flags so only flags set during this exit are visible */ + current_thread_info()->exit_flags = 0; + local_irq_disable(); - regs->exit_flags = 0; again: check_return_regs_valid(regs); user_enter_irqoff(); @@ -200,9 +208,7 @@ again: /* Restore user access locks last */ kuap_user_restore(regs); - - ret = regs->exit_flags; - + ret = current_thread_info()->exit_flags & _TIF_RESTOREALL; #ifdef CONFIG_PPC64 regs->exit_result = ret; #endif diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c index 316d4f5ead8e..6cd180bc36ab 100644 --- a/arch/powerpc/kernel/ptrace/ptrace.c +++ b/arch/powerpc/kernel/ptrace/ptrace.c @@ -291,7 +291,6 @@ void __init pt_regs_check(void) CHECK_REG(PT_DAR, dar); CHECK_REG(PT_DSISR, dsisr); CHECK_REG(PT_RESULT, result); - CHECK_REG(PT_EXIT_FLAGS, exit_flags); #undef CHECK_REG BUILD_BUG_ON(PT_REGS_COUNT != sizeof(struct user_pt_regs) / sizeof(unsigned long)); diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index bb42a8b6c642..cc6498501610 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -356,6 +356,6 @@ void signal_fault(struct task_struct *tsk, struct pt_regs *regs, void arch_do_signal_or_restart(struct pt_regs *regs) { BUG_ON(regs != current->thread.regs); - regs->exit_flags |= _TIF_RESTOREALL; + current_thread_info()->exit_flags |= _TIF_RESTOREALL; do_signal(current); } -- cgit v1.2.3 From c824ab65685bb119c6c6a3a200b3428c72862d5a Mon Sep 17 00:00:00 2001 From: Thorsten Blum Date: Thu, 2 Jul 2026 23:15:55 +0200 Subject: powerpc/boot: Fix simpleboot CPU node lookup check fdt_node_offset_by_prop_value() returns a negative error code on failure - fix the check accordingly. Fixes: d2477b5cc8ca ("[POWERPC] bootwrapper: Add a firmware-independent simpleboot target.") Signed-off-by: Thorsten Blum Reviewed-by: Ritesh Harjani (IBM) Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260702211554.56923-4-thorsten.blum@linux.dev --- arch/powerpc/boot/simpleboot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c index c80691d83880..27591df41e9e 100644 --- a/arch/powerpc/boot/simpleboot.c +++ b/arch/powerpc/boot/simpleboot.c @@ -68,7 +68,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, /* finally, setup the timebase */ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", "cpu", sizeof("cpu")); - if (!node) + if (node < 0) fatal("Cannot find cpu node\n"); timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); if (timebase && (size == 4)) -- cgit v1.2.3 From 43863f6575d2211e8c5157fefb83ad0ad046aab4 Mon Sep 17 00:00:00 2001 From: Thorsten Blum Date: Thu, 2 Jul 2026 23:15:56 +0200 Subject: powerpc/boot: Fix treeboot-currituck CPU node lookup check fdt_node_offset_by_prop_value() returns a negative error code on failure - fix the check accordingly. Fixes: 228d55053397 ("powerpc/47x: Add support for the new IBM currituck platform") Signed-off-by: Thorsten Blum Reviewed-by: Ritesh Harjani (IBM) Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260702211554.56923-5-thorsten.blum@linux.dev --- arch/powerpc/boot/treeboot-currituck.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c index d53e8a592f81..5b5363b74f9f 100644 --- a/arch/powerpc/boot/treeboot-currituck.c +++ b/arch/powerpc/boot/treeboot-currituck.c @@ -102,7 +102,7 @@ void platform_init(void) node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", "cpu", sizeof("cpu")); - if (!node) + if (node < 0) fatal("Cannot find cpu node\n"); timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); if (timebase && (size == 4)) -- cgit v1.2.3 From b24fc8278b70a9d27ec801a427ab4de9b769d69a Mon Sep 17 00:00:00 2001 From: Thorsten Blum Date: Thu, 2 Jul 2026 23:15:57 +0200 Subject: powerpc/boot: Fix treeboot-akebono CPU node lookup check fdt_node_offset_by_prop_value() returns a negative error code on failure - fix the check accordingly. Fixes: 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform") Signed-off-by: Thorsten Blum Reviewed-by: Ritesh Harjani (IBM) Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260702211554.56923-6-thorsten.blum@linux.dev --- arch/powerpc/boot/treeboot-akebono.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/treeboot-akebono.c b/arch/powerpc/boot/treeboot-akebono.c index e3cc2599869c..1b529037480f 100644 --- a/arch/powerpc/boot/treeboot-akebono.c +++ b/arch/powerpc/boot/treeboot-akebono.c @@ -146,7 +146,7 @@ void platform_init(char *userdata) node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", "cpu", sizeof("cpu")); - if (!node) + if (node < 0) fatal("Cannot find cpu node\n"); timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); if (timebase && (size == 4)) -- cgit v1.2.3 From 41bf83c1b10781fcb992ff0680db771b7b833308 Mon Sep 17 00:00:00 2001 From: Thorsten Blum Date: Mon, 13 Jul 2026 11:17:33 +0200 Subject: powerpc/ps3: Remove unused struct table in setup_areas() The local table structure is not used - remove it. Reviewed-by: Geert Uytterhoeven Signed-off-by: Thorsten Blum Reviewed-by: Christophe Leroy (CS GROUP) Reviewed-by: Ritesh Harjani (IBM) Reviewed-by: Amit Machhiwal Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260713091731.97212-3-thorsten.blum@linux.dev --- arch/powerpc/platforms/ps3/spu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index e4e0b45e1b9d..a71c0b0cfb07 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -191,8 +191,6 @@ static void spu_unmap(struct spu *spu) static int __init setup_areas(struct spu *spu) { - struct table {char* name; unsigned long addr; unsigned long size;}; - spu_pdata(spu)->shadow = ioremap_prot(spu_pdata(spu)->shadow_addr, sizeof(struct spe_shadow), pgprot_noncached_wc(PAGE_KERNEL_RO)); -- cgit v1.2.3 From 0bb024f11d120abff3e8db9144a585b9d7fb8459 Mon Sep 17 00:00:00 2001 From: Thorsten Blum Date: Sat, 11 Jul 2026 15:09:32 +0200 Subject: powerpc/ps3: Fix map failure path in dma_ioc0_map_pages() If lv1_put_iopte() fails in dma_ioc0_map_pages(), the error path decrements iopage but keeps using the failed mapping's offset. As a result, it repeatedly tries to invalidate the failed IOPTE slot and leaves the already installed IOPTEs valid. Recompute offset and invalidate the installed IOPTEs instead. Fixes: 6bb5cf102541 ("[POWERPC] PS3: System-bus rework") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Reviewed-by: Ritesh Harjani (IBM) Reviewed-by: Geert Uytterhoeven Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260711130931.740719-3-thorsten.blum@linux.dev --- arch/powerpc/platforms/ps3/mm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 20fc5b68faee..315a32fd75b1 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -615,6 +615,7 @@ static int dma_ioc0_map_pages(struct ps3_dma_region *r, unsigned long phys_addr, fail_map: for (iopage--; 0 <= iopage; iopage--) { + offset = (1 << r->page_size) * iopage; lv1_put_iopte(0, c->bus_addr + offset, c->lpar_addr + offset, -- cgit v1.2.3 From d71b3ca5231750fecdefb3390595e7db30979ac4 Mon Sep 17 00:00:00 2001 From: Thorsten Blum Date: Sat, 4 Jul 2026 14:13:54 +0200 Subject: powerpc/perf: Use strstarts() to simplify is_thread_imc_pmu() Replace the open-coded implementation with strstarts() to simplify is_thread_imc_pmu(). Signed-off-by: Thorsten Blum Reviewed-by: Athira Rajeev Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260704121353.201583-3-thorsten.blum@linux.dev --- arch/powerpc/perf/imc-pmu.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c index e3822f36c419..1d2db6d3e226 100644 --- a/arch/powerpc/perf/imc-pmu.c +++ b/arch/powerpc/perf/imc-pmu.c @@ -1023,10 +1023,7 @@ static int thread_imc_event_init(struct perf_event *event) static bool is_thread_imc_pmu(struct perf_event *event) { - if (!strncmp(event->pmu->name, "thread_imc", strlen("thread_imc"))) - return true; - - return false; + return strstarts(event->pmu->name, "thread_imc"); } static __be64 *get_event_base_addr(struct perf_event *event) -- cgit v1.2.3 From 86f057c19fbe089ec8a2020ef5f1579b99d87ac7 Mon Sep 17 00:00:00 2001 From: Thorsten Blum Date: Tue, 23 Jun 2026 17:38:25 +0200 Subject: powerpc/serial: Fix include guard comment Replace _PPC64_SERIAL_H with _ASM_POWERPC_SERIAL_H to match the actual macro name. Remove an empty comment while at it. Signed-off-by: Thorsten Blum Reviewed-by: Mukesh Kumar Chaurasiya (IBM) Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260623153825.403819-2-thorsten.blum@linux.dev --- arch/powerpc/include/asm/serial.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/powerpc/include/asm/serial.h b/arch/powerpc/include/asm/serial.h index cd6c18d0e66e..c3eb4a64b3f5 100644 --- a/arch/powerpc/include/asm/serial.h +++ b/arch/powerpc/include/asm/serial.h @@ -1,6 +1,4 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - */ #ifndef _ASM_POWERPC_SERIAL_H #define _ASM_POWERPC_SERIAL_H @@ -18,4 +16,4 @@ extern void find_legacy_serial_ports(void); #define find_legacy_serial_ports() do { } while (0) #endif -#endif /* _PPC64_SERIAL_H */ +#endif /* _ASM_POWERPC_SERIAL_H */ -- cgit v1.2.3 From d568a43f6dbba3ba006304d95fd09862bd482a2f Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 23 Jul 2026 12:34:46 +0100 Subject: afs: Fix afs_fs_fetch_data() to set call->async Fix afs_fs_fetch_data() to set call->async on an async operation as does afs_fs_fetch_data64(). Fixes: eddf51f2bb2c ("afs: Make {Y,}FS.FetchData an asynchronous operation") Link: https://sashiko.dev/#/patchset/20260702144919.172295-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260723113452.566619-2-dhowells@redhat.com cc: Marc Dionne cc: Jeffrey Altman cc: linux-afs@lists.infradead.org cc: stable@kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/afs/fsclient.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c index a2ffd60889f8..626e1d37b915 100644 --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -477,6 +477,9 @@ void afs_fs_fetch_data(struct afs_operation *op) if (!call) return afs_op_nomem(op); + if (op->flags & AFS_OPERATION_ASYNC) + call->async = true; + /* marshall the parameters */ bp = call->request; bp[0] = htonl(FSFETCHDATA); -- cgit v1.2.3 From 222052c6be186f2074b3a4d741d5de200f654c43 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 23 Jul 2026 12:34:47 +0100 Subject: afs: Fix afs_fs_fetch_data() to subtract transferred from len Fix afs_fs_fetch_data() to subtract subreq->transferred from subreq->len rather than adding it. Fixes: f28fc2010d62 ("afs: Eliminate afs_read") Link: https://sashiko.dev/#/patchset/20260713081022.2186481-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260723113452.566619-3-dhowells@redhat.com cc: Marc Dionne cc: Jeffrey Altman cc: linux-afs@lists.infradead.org cc: stable@kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/afs/fsclient.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c index 626e1d37b915..1a3f186a6a11 100644 --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -487,7 +487,7 @@ void afs_fs_fetch_data(struct afs_operation *op) bp[2] = htonl(vp->fid.vnode); bp[3] = htonl(vp->fid.unique); bp[4] = htonl(lower_32_bits(subreq->start + subreq->transferred)); - bp[5] = htonl(lower_32_bits(subreq->len + subreq->transferred)); + bp[5] = htonl(lower_32_bits(subreq->len - subreq->transferred)); call->fid = vp->fid; trace_afs_make_fs_call(call, &vp->fid); -- cgit v1.2.3 From 4af1ec68d54b3871155914d584fb10669c41a861 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 23 Jul 2026 12:34:48 +0100 Subject: afs: Fix UAF when sending a message In afs_make_call(), there's a race with async call reception and destruction. If a call is dispatched that doesn't have call->write_iter set (used to specify the data content for FS.StoreData), then the first rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr. Once rxrpc_send_data() queues the last request packet, the response could come in at any time and cause the call to be completed and put. However, afs_make_call() will look at the call again to see it ->write_iter should be handled - something it's only allowed to do if it has its own ref on the call. Whilst this is the case for synchronous calls, it isn't true for async calls such as FS.FetchData. There's also a potential UAF in afs_make_call() in the event that an asynchronous call is being sent, but the call fails in some way (e.g. it gets aborted from the server). The problem there is that afs_make_call() tries to abort a call if the rxrpc send fails, but the asynchronous notification from rxrpc may have caused the afs_call to be torn down. generic/650 plays games with randomly taking CPUs offline, and can interject a significant delay such that the call is deallocated before afs_make_call() gets to check call->write_iter - and a UAF ensues (caught by KASAN). BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs] Read of size 8 at addr ffff888035e050e8 by task fsstress/1409 Fix this by making afs_make_op_call() give the op->call its own ref rather than transferring the caller's ref to it and then dropping the ref when afs_make_call() returns. This also means that the afs_make_call() func never loses its ref on the call now. Fixes: eddf51f2bb2c ("afs: Make {Y,}FS.FetchData an asynchronous operation") Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Link: https://sashiko.dev/#/patchset/20260702144919.172295-1-dhowells%40redhat.com Reported-by: Marc Dionne Signed-off-by: David Howells Link: https://patch.msgid.link/20260723113452.566619-4-dhowells@redhat.com cc: Jeffrey Altman cc: linux-afs@lists.infradead.org cc: stable@kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/afs/internal.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 601f01e5c15f..290873bac89b 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -1421,7 +1421,7 @@ static inline void afs_make_op_call(struct afs_operation *op, struct afs_call *c { struct afs_addr_list *alist = op->estate->addresses; - op->call = call; + op->call = afs_get_call(call, afs_call_trace_get); op->type = call->type; call->op = op; call->key = op->key; @@ -1429,6 +1429,7 @@ static inline void afs_make_op_call(struct afs_operation *op, struct afs_call *c call->peer = rxrpc_kernel_get_peer(alist->addrs[op->addr_index].peer); call->service_id = op->server->service_id; afs_make_call(call, gfp); + afs_put_call(call); } static inline void afs_extract_begin(struct afs_call *call, void *buf, size_t size) -- cgit v1.2.3 From 0a4bb2abc3e56d7be6e69b050c88ba52c87e22bf Mon Sep 17 00:00:00 2001 From: Hardik Prakash Date: Sat, 18 Jul 2026 11:13:31 +0530 Subject: i2c: designware: defer probe if child GpioInt controllers are not bound I2C controllers may have child devices with GpioInt resources that depend on GPIO controllers being fully initialized. If the I2C controller probes and enumerates children before the referenced GPIO controller has completed probe, GPIO interrupts may not be properly configured, leading to device failures. On Lenovo Yoga 7 14AGP11, the WACF2200 touchscreen (child of AMDI0010:02) has a GpioInt resource pointing to GPIO 157 on the pinctrl-amd controller (AMDI0030:00). When i2c-designware probes AMDI0010:02 before pinctrl-amd finishes initializing, I2C transactions fail with lost arbitration errors: 0.285952 amd_gpio_probe: registering gpiochip <- GPIO chip visible 0.287121 amd_gpio_probe: requesting parent IRQ <- probe still running 0.301454 AMDI0010:02 dw_i2c_plat_probe: start <- races here 2.348157 lost arbitration Add a dependency check that walks ACPI child devices and defers probe until any referenced GPIO controller is bound. Fixes: 3812a9e84265 ("pinctrl-amd: enable IRQ for WACF2200 touchscreen on Lenovo Yoga 7 14AGP11") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221494 Suggested-by: Mario Limonciello Suggested-by: Andy Shevchenko Signed-off-by: Hardik Prakash Assisted-by: Claude:claude-sonnet-5 Assisted-by: DeepSeek:deepseek-v4-pro Cc: # v7.1+ Acked-by: Bartosz Golaszewski Reviewed-by: Andy Shevchenko Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260718054330.8975-2-hardikprakash.official@gmail.com --- drivers/i2c/busses/i2c-designware-platdrv.c | 80 +++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 6d6e81242f74..c8a203fff4d1 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -8,12 +8,14 @@ * Copyright (C) 2007 MontaVista Software Inc. * Copyright (C) 2009 Provigent Ltd. */ +#include #include #include #include #include #include #include +#include #include #include #include @@ -130,6 +132,80 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) return 0; } +#if defined(CONFIG_ACPI) && defined(CONFIG_GPIOLIB) +/* + * Check whether an ACPI GpioInt resource's referenced GPIO controller + * has finished probing. Resources with no named controller (resource + * source string) are skipped, since they can't be resolved to a + * struct device. + */ +static int check_gpioint_resource(struct acpi_resource *ares, void *data) +{ + struct acpi_resource_gpio *agpio; + struct acpi_device *gpio_adev; + struct device *gpio_dev; + acpi_handle handle; + acpi_status status; + + if (!acpi_gpio_get_irq_resource(ares, &agpio)) + return 1; /* not a GpioInt resource, skip */ + + if (!agpio->resource_source.string_length) + return 1; /* no named controller, skip */ + + status = acpi_get_handle(NULL, agpio->resource_source.string_ptr, &handle); + if (ACPI_FAILURE(status)) + return 1; + + gpio_adev = acpi_fetch_acpi_dev(handle); + if (!gpio_adev) + return 1; + + struct gpio_device *gdev __free(gpio_device_put) = + gpio_device_find_by_fwnode(acpi_fwnode_handle(gpio_adev)); + if (!gdev) + return -EPROBE_DEFER; /* controller not registered yet: abort walk */ + + gpio_dev = gpio_device_to_device(gdev)->parent; + + guard(device)(gpio_dev); + if (!device_is_bound(gpio_dev)) + return -EPROBE_DEFER; /* controller not bound yet: abort walk */ + + return 1; /* bound, skip adding to resource list, continue walk */ +} + +static int check_child_gpioint(struct acpi_device *adev, void *data) +{ + LIST_HEAD(res_list); + int ret; + + ret = acpi_dev_get_resources(adev, &res_list, check_gpioint_resource, NULL); + if (ret < 0) + return ret; + + acpi_dev_free_resource_list(&res_list); + + return 0; +} + +static int i2c_dw_check_gpio_dependencies(struct device *dev) +{ + struct acpi_device *adev; + + adev = ACPI_COMPANION(dev); + if (!adev) + return 0; + + return acpi_dev_for_each_child(adev, check_child_gpioint, NULL); +} +#else +static int i2c_dw_check_gpio_dependencies(struct device *dev) +{ + return 0; +} +#endif /* CONFIG_ACPI && CONFIG_GPIOLIB */ + static int dw_i2c_plat_probe(struct platform_device *pdev) { u32 flags = (uintptr_t)device_get_match_data(&pdev->dev); @@ -138,6 +214,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) struct dw_i2c_dev *dev; int irq, ret; + ret = i2c_dw_check_gpio_dependencies(device); + if (ret) + return ret; + irq = platform_get_irq_optional(pdev, 0); if (irq == -ENXIO) flags |= ACCESS_POLLING; -- cgit v1.2.3 From b14361aca6350ff7907b0e9903c7b94dc7d5d4a0 Mon Sep 17 00:00:00 2001 From: Xuanqiang Luo Date: Wed, 22 Jul 2026 16:38:58 +0800 Subject: fou: Fix use-after-free in fou_create() fou_create() publishes struct fou through sk_user_data before adding the new FOU port to the per-netns list. If fou_add_to_port_list() fails, the error path frees fou while it is still reachable through sk_user_data. A concurrent receive can then dereference the freed object in fou_from_sock(). This ordering issue was previously noted in the linked discussion. The failure is reachable when local port 0 is requested. Each socket binds to a different ephemeral port, but fou_cfg_cmp() compares the requested port 0 and reports -EALREADY once an entry already exists. Release the tunnel socket before freeing fou so sk_user_data is cleared first, and defer reclamation with kfree_rcu() to protect concurrent RCU readers. This matches the lifetime handling in fou_release(). Fixes: 23461551c006 ("fou: Support for foo-over-udp RX path") Suggested-by: Kuniyuki Iwashima Link: https://lore.kernel.org/netdev/20260502031401.3557229-12-kuniyu@google.com/ Cc: stable@vger.kernel.org Signed-off-by: Xuanqiang Luo Link: https://patch.msgid.link/20260722083858.182506-1-xuanqiang.luo@linux.dev Signed-off-by: Paolo Abeni --- net/ipv4/fou_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fou_core.c b/net/ipv4/fou_core.c index 865bd7205122..ab09dfcdecbd 100644 --- a/net/ipv4/fou_core.c +++ b/net/ipv4/fou_core.c @@ -629,9 +629,9 @@ static int fou_create(struct net *net, struct fou_cfg *cfg, return 0; error: - kfree(fou); if (sock) udp_tunnel_sock_release(sock->sk); + kfree_rcu(fou, rcu); return err; } -- cgit v1.2.3 From 295dd295e2137e10e9a5b1891d97e0f08de76f03 Mon Sep 17 00:00:00 2001 From: Yehyeong Lee Date: Thu, 23 Jul 2026 10:08:29 +0900 Subject: net: mpls: initialize rtm_tos in mpls_getroute() mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE request by filling a struct rtmsg allocated from an skb whose data area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every field of the header except rtm_tos: r = nlmsg_data(nlh); r->rtm_family = AF_MPLS; r->rtm_dst_len = 20; r->rtm_src_len = 0; r->rtm_table = RT_TABLE_MAIN; r->rtm_type = RTN_UNICAST; r->rtm_scope = RT_SCOPE_UNIVERSE; r->rtm_protocol = rt->rt_protocol; r->rtm_flags = 0; struct rtmsg has no padding, so the one uninitialised byte rtm_tos (offset 3) is copied straight to user space on recvmsg(), leaking a byte of uninitialised heap memory. This is in contrast to mpls_dump_route(), which fills the very same header and does set rtm_tos = 0. Initialize rtm_tos to 0, matching mpls_dump_route(). Reproduced with KMSAN by adding an MPLS route and issuing a non-RTM_F_FIB_MATCH RTM_GETROUTE for its label: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0 _copy_to_iter+0x36c/0x33f0 __skb_datagram_iter+0x196/0x12c0 skb_copy_datagram_iter+0x5b/0x210 netlink_recvmsg+0x37b/0xef0 ... Uninit was created at: __alloc_skb+0x8ca/0x10e0 mpls_getroute+0x1280/0x3a40 rtnetlink_rcv_msg+0x1138/0x15a0 ... Byte 19 of 64 is uninitialized (byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos) Fixes: 397fc9e5cefe ("mpls: route get support") Signed-off-by: Yehyeong Lee Link: https://patch.msgid.link/20260723010830.289917-1-yhlee@isslab.korea.ac.kr Signed-off-by: Paolo Abeni --- net/mpls/af_mpls.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c index 4406c304b639..961be5054a03 100644 --- a/net/mpls/af_mpls.c +++ b/net/mpls/af_mpls.c @@ -2539,6 +2539,7 @@ static int mpls_getroute(struct sk_buff *in_skb, struct nlmsghdr *in_nlh, r->rtm_family = AF_MPLS; r->rtm_dst_len = 20; r->rtm_src_len = 0; + r->rtm_tos = 0; r->rtm_table = RT_TABLE_MAIN; r->rtm_type = RTN_UNICAST; r->rtm_scope = RT_SCOPE_UNIVERSE; -- cgit v1.2.3 From aef96eead2860cbfa371e4471d4f04412213b958 Mon Sep 17 00:00:00 2001 From: "Cen Zhang (Microsoft)" Date: Thu, 23 Jul 2026 00:49:55 -0400 Subject: net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char, 0-255) into the kernel knode object without bounds validation. When a packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates `ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior per C11 6.5.7p3, triggerable by an unprivileged user via user/network namespaces. UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43 shift exponent 32 is too large for 32-bit type int Fix this by rejecting offshift >= 16 during filter creation in u32_change(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: AutonomousCodeSecurity@microsoft.com Link: https://lore.kernel.org/all/20260720034514.23053-1-blbllhy@gmail.com Signed-off-by: Cen Zhang (Microsoft) Acked-by: Jamal Hadi Salim Tested-by: Jamal Hadi Salim Tested-by: Victor Nogueira Link: https://patch.msgid.link/20260723044955.89471-1-blbllhy@gmail.com Signed-off-by: Paolo Abeni --- net/sched/cls_u32.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c index 8f30cc82181d..ac98b1c2144a 100644 --- a/net/sched/cls_u32.c +++ b/net/sched/cls_u32.c @@ -1107,6 +1107,13 @@ static int u32_change(struct net *net, struct sk_buff *in_skb, goto erridr; } + if (s->offshift >= 16) { + NL_SET_ERR_MSG_MOD(extack, + "offshift must be less than 16"); + err = -EINVAL; + goto erridr; + } + n = kzalloc_flex(*n, sel.keys, s->nkeys); if (n == NULL) { err = -ENOBUFS; -- cgit v1.2.3 From f621d6ebeebb6374342571e4ddf45fdbc420f6cd Mon Sep 17 00:00:00 2001 From: Xuanqiang Luo Date: Thu, 23 Jul 2026 18:54:54 +0800 Subject: net/smc: fix socket use-after-free during link group termination __smc_lgr_terminate() drops conns_lock after finding a connection in lgr->conns_all, but before taking a reference on its socket. The connection is embedded in the socket, and its registration reference protects it only while the connection remains in the tree. A concurrent close can unregister the connection and drop that reference, freeing the socket before the termination worker reaches sock_hold(). The race is reachable when close overlaps link group termination. Local stress testing reproduced the use-after-free and KASAN reported: BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc] Write of size 4 by task kworker/3:3 Workqueue: events smc_lgr_terminate_work [smc] __smc_lgr_terminate.part.0 [smc] The socket was allocated by smc_create(), freed through slab_free_after_rcu_debug(), and was followed by: refcount_t: addition on 0; use-after-free. __smc_lgr_terminate.part.0 [smc] Take the socket reference while conns_lock still protects the tree entry. The unregister path then cannot drop the last reference until termination has finished using the socket. Fixes: 69318b5215f2 ("net/smc: improve abnormal termination locking") Cc: stable@vger.kernel.org Signed-off-by: Xuanqiang Luo Reviewed-by: Mahanta Jambigi Link: https://patch.msgid.link/20260723105454.87016-1-xuanqiang.luo@linux.dev Signed-off-by: Paolo Abeni --- net/smc/smc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index cf6b620fef05..b4208cb186c5 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -1572,10 +1572,10 @@ static void __smc_lgr_terminate(struct smc_link_group *lgr, bool soft) read_lock_bh(&lgr->conns_lock); node = rb_first(&lgr->conns_all); while (node) { - read_unlock_bh(&lgr->conns_lock); conn = rb_entry(node, struct smc_connection, alert_node); smc = container_of(conn, struct smc_sock, conn); sock_hold(&smc->sk); /* sock_put below */ + read_unlock_bh(&lgr->conns_lock); lock_sock(&smc->sk); smc_conn_kill(conn, soft); release_sock(&smc->sk); -- cgit v1.2.3 From 88c17de85ddb459c3fe1e3c65d61fa366b1cf0a8 Mon Sep 17 00:00:00 2001 From: Xuanqiang Luo Date: Thu, 23 Jul 2026 14:04:45 +0800 Subject: bpf: lwt: Fix dst reference leak on reroute failure bpf_lwt_xmit_reroute() obtains a referenced dst from the route lookup. When skb_cow_head() fails before that dst is installed on the skb, the error path only frees the skb. The skb still owns its previous dst, so the newly looked up dst reference is leaked. Release the new dst reference before freeing the skb on this error path. Fixes: 3bd0b15281af ("bpf: add handling of BPF_LWT_REROUTE to lwt_bpf.c") Cc: stable@vger.kernel.org Signed-off-by: Xuanqiang Luo Link: https://patch.msgid.link/20260723060445.21926-1-xuanqiang.luo@linux.dev Signed-off-by: Paolo Abeni --- net/core/lwt_bpf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/lwt_bpf.c b/net/core/lwt_bpf.c index bf588f508b79..652952d416f2 100644 --- a/net/core/lwt_bpf.c +++ b/net/core/lwt_bpf.c @@ -255,8 +255,10 @@ static int bpf_lwt_xmit_reroute(struct sk_buff *skb) * if there is enough header space in skb. */ err = skb_cow_head(skb, LL_RESERVED_SPACE(dst->dev)); - if (unlikely(err)) + if (unlikely(err)) { + dst_release(dst); goto err; + } skb_dst_drop(skb); skb_dst_set(skb, dst); -- cgit v1.2.3 From 080695e6f005e2396f1207fd69d24c442cb230c6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 24 Jul 2026 09:11:37 +0000 Subject: net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister() syzbot reported a memory leak [1] in the UDP tunnel NIC offload code. When device registration fails (e.g. in register_netdevice()), netdev core unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister() returns early: if (utn->work_pending) return; Because failed registrations do not enter netdev_wait_allrefs_any(), no subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked permanently. Fix this by removing the early return. Instead, synchronously cancel any pending work with cancel_delayed_work_sync() before freeing @utn. To be able to call cancel_delayed_work_sync() while holding RTNL (the work also needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work()) to prevent high CPU contention while waiting for RTNL lock. The utn->work_pending bookkeeping is no longer needed and is removed, as the workqueue core already tracks the pending/running state of the work. [1] BUG: memory leak unreferenced object 0xffff888127d5f840 (size 96): comm "syz-executor", pid 5806, jiffies 4294942188 backtrace (crc 99fdb6c8): __kmalloc_noprof+0x3bf/0x550 udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline] udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline] udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931 notifier_call_chain+0x59/0x160 kernel/notifier.c:85 call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250 register_netdevice+0xc10/0xeb0 net/core/dev.c:11478 Fixes: cc4e3835eff4 ("udp_tunnel: add central NIC RX port offload infrastructure") Reported-by: syzbot+eca845fb8c18dd6b44c1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a632b15.dde6c935.cf6c8.0011.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260724091137.1792543-1-edumazet@google.com Signed-off-by: Paolo Abeni --- net/ipv4/udp_tunnel_nic.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/net/ipv4/udp_tunnel_nic.c b/net/ipv4/udp_tunnel_nic.c index 3b32a0afa979..53a1a9c1f8bf 100644 --- a/net/ipv4/udp_tunnel_nic.c +++ b/net/ipv4/udp_tunnel_nic.c @@ -32,13 +32,12 @@ struct udp_tunnel_nic_table_entry { * @lock: protects all fields * @need_sync: at least one port start changed * @need_replay: space was freed, we need a replay of all ports - * @work_pending: @work is currently scheduled * @n_tables: number of tables under @entries * @missed: bitmap of tables which overflown * @entries: table of tables of ports currently offloaded */ struct udp_tunnel_nic { - struct work_struct work; + struct delayed_work work; struct net_device *dev; @@ -46,7 +45,6 @@ struct udp_tunnel_nic { u8 need_sync:1; u8 need_replay:1; - u8 work_pending:1; unsigned int n_tables; unsigned long missed; @@ -301,11 +299,10 @@ __udp_tunnel_nic_device_sync(struct net_device *dev, struct udp_tunnel_nic *utn) static void udp_tunnel_nic_device_sync(struct net_device *dev, struct udp_tunnel_nic *utn) { - if (!utn->need_sync || utn->work_pending) + if (!utn->need_sync) return; - queue_work(udp_tunnel_nic_workqueue, &utn->work); - utn->work_pending = 1; + queue_delayed_work(udp_tunnel_nic_workqueue, &utn->work, 0); } static bool @@ -731,12 +728,17 @@ udp_tunnel_nic_replay(struct net_device *dev, struct udp_tunnel_nic *utn) static void udp_tunnel_nic_device_sync_work(struct work_struct *work) { struct udp_tunnel_nic *utn = - container_of(work, struct udp_tunnel_nic, work); + container_of(work, struct udp_tunnel_nic, work.work); - rtnl_lock(); + /* We cannot block on RTNL here, otherwise we would deadlock with + * udp_tunnel_nic_unregister() calling cancel_delayed_work_sync() + * while holding RTNL. Requeue with 1 jiffy delay if RTNL is contended. + */ + if (!rtnl_trylock()) { + queue_delayed_work(udp_tunnel_nic_workqueue, &utn->work, 1); + return; + } mutex_lock(&utn->lock); - - utn->work_pending = 0; __udp_tunnel_nic_device_sync(utn->dev, utn); if (utn->need_replay) @@ -757,7 +759,7 @@ udp_tunnel_nic_alloc(const struct udp_tunnel_nic_info *info, if (!utn) return NULL; utn->n_tables = n_tables; - INIT_WORK(&utn->work, udp_tunnel_nic_device_sync_work); + INIT_DELAYED_WORK(&utn->work, udp_tunnel_nic_device_sync_work); mutex_init(&utn->lock); for (i = 0; i < n_tables; i++) { @@ -901,11 +903,11 @@ udp_tunnel_nic_unregister(struct net_device *dev, struct udp_tunnel_nic *utn) udp_tunnel_nic_flush(dev, utn); udp_tunnel_nic_unlock(dev); - /* Wait for the work to be done using the state, netdev core will - * retry unregister until we give up our reference on this device. + /* Make sure no work is running or queued before freeing @utn. + * The work handler uses rtnl_trylock(), so it will not deadlock + * against the RTNL we are holding here. */ - if (utn->work_pending) - return; + cancel_delayed_work_sync(&utn->work); udp_tunnel_nic_free(utn); release_dev: -- cgit v1.2.3 From 6395789e4739aa5177bbec0fa0f07ccc38d249b0 Mon Sep 17 00:00:00 2001 From: Jose Maria Casanova Crespo Date: Mon, 27 Jul 2026 11:32:28 -0300 Subject: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO. Fixes: 553c942f8b2c ("drm/vc4: Allow using more than 256MB of CMA memory.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.8 Signed-off-by: Jose Maria Casanova Crespo Reviewed-by: Maíra Canal Reviewed-by: Iago Toral Quiroga Link: https://patch.msgid.link/20260727-vc4-bin-oom-fixes-v2-1-0d8a5eddc7c9@igalia.com Signed-off-by: Maíra Canal --- drivers/gpu/drm/vc4/vc4_irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vc4/vc4_irq.c b/drivers/gpu/drm/vc4/vc4_irq.c index 8e5141bb5075..7877d493d80e 100644 --- a/drivers/gpu/drm/vc4/vc4_irq.c +++ b/drivers/gpu/drm/vc4/vc4_irq.c @@ -104,7 +104,7 @@ vc4_overflow_mem_work(struct work_struct *work) vc4->bin_alloc_overflow = BIT(bin_bo_slot); V3D_WRITE(V3D_BPOA, bo->base.dma_addr + bin_bo_slot * vc4->bin_alloc_size); - V3D_WRITE(V3D_BPOS, bo->base.base.size); + V3D_WRITE(V3D_BPOS, vc4->bin_alloc_size); V3D_WRITE(V3D_INTCTL, V3D_INT_OUTOMEM); V3D_WRITE(V3D_INTENA, V3D_INT_OUTOMEM); spin_unlock_irqrestore(&vc4->job_lock, irqflags); -- cgit v1.2.3 From 48a570c964d8e37d353381e4195106277e17f5cb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ma=C3=ADra=20Canal?= Date: Mon, 27 Jul 2026 11:32:29 -0300 Subject: drm/vc4: Zero the tile state data array before each BIN job MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The binner BO is a single 16MB buffer split into 512KB slots that are handed out to jobs at submission time and recycled as jobs complete, without ever being cleared. Each slot holds the job's Tile State Data Array (TSDA) at its start, followed by the tile allocation pool. While the tile allocation pool is only walked by the render thread through branches the binner generated during the current job, the TSDA is the PTB's own per-tile bookkeeping and is consumed by the hardware itself. Although the kernel sets the "Auto-initialise Tile State Data Array" flag in the tile binning mode configuration, the PTB demonstrably still acts on stale tile state left by the slot's previous user: the binner ends up creating invalid command streams with invalid primitive streams and branches, which can cause GPU hangs as observed in [1][2]. Zero the TSDA when the job's binning slot is configured. This clears 48 bytes per tile (~24KB for a 1080p frame) in the submission path, and guarantees the PTB never sees another job's tile state. The tile count is only checked for being non-zero today, so the 8-bit fields it comes from can describe a tile state array almost six times larger than the slot it has to live in. Bound it before the slot is handed out, since such size decides how much of the slot is left for the tile alloc pool. Link: https://github.com/raspberrypi/linux/issues/3221 [1] Link: https://github.com/raspberrypi/linux/issues/5780 [2] Fixes: 553c942f8b2c ("drm/vc4: Allow using more than 256MB of CMA memory.") Cc: stable@vger.kernel.org Reviewed-by: Iago Toral Quiroga Link: https://patch.msgid.link/20260727-vc4-bin-oom-fixes-v2-2-0d8a5eddc7c9@igalia.com Signed-off-by: Maíra Canal --- drivers/gpu/drm/vc4/vc4_validate.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_validate.c b/drivers/gpu/drm/vc4/vc4_validate.c index 7f2fadfde7a8..d2a65c968b1f 100644 --- a/drivers/gpu/drm/vc4/vc4_validate.c +++ b/drivers/gpu/drm/vc4/vc4_validate.c @@ -385,6 +385,23 @@ validate_tile_binning_config(VALIDATE_ARGS) return -EINVAL; } + /* The tile state data array is 48 bytes per tile, and we put it at + * the start of a BO containing both it and the tile alloc. + */ + tile_state_size = 48 * tile_count; + + /* Since the tile alloc array will follow us, align. */ + tile_state_size = roundup(tile_state_size, 4096); + + /* Reject configurations whose tile state would leave no room for + * the tile alloc pool that follows it in the slot. + */ + if (tile_state_size >= vc4->bin_alloc_size) { + DRM_DEBUG("Tile binning config of %dx%d too large\n", + exec->bin_tiles_x, exec->bin_tiles_y); + return -EINVAL; + } + bin_slot = vc4_v3d_get_bin_slot(vc4); if (bin_slot < 0) { if (bin_slot != -EINTR && bin_slot != -ERESTARTSYS) { @@ -400,13 +417,13 @@ validate_tile_binning_config(VALIDATE_ARGS) exec->bin_slots |= BIT(bin_slot); bin_addr = vc4->bin_bo->base.dma_addr + bin_slot * vc4->bin_alloc_size; - /* The tile state data array is 48 bytes per tile, and we put it at - * the start of a BO containing both it and the tile alloc. - */ - tile_state_size = 48 * tile_count; + exec->tile_alloc_offset = bin_addr + tile_state_size; - /* Since the tile alloc array will follow us, align. */ - exec->tile_alloc_offset = bin_addr + roundup(tile_state_size, 4096); + /* The TSDA area must be zeroed out before use, otherwise the PTB might + * consume a stale tile state. + */ + memset(vc4->bin_bo->base.vaddr + bin_slot * vc4->bin_alloc_size, 0, + tile_state_size); *(uint8_t *)(validated + 14) = ((flags & ~(VC4_BIN_CONFIG_ALLOC_INIT_BLOCK_SIZE_MASK | -- cgit v1.2.3 From 2f067f5a450ea07efd249142a11d940a068fe29c Mon Sep 17 00:00:00 2001 From: Zhao Li Date: Tue, 28 Jul 2026 19:21:56 +0800 Subject: wifi: mac80211: fix tid_tx use-after-free on BA session stop ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping sta->lock: ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */ ... spin_unlock_bh(&sta->lock); if (start_txq) ieee80211_agg_start_txq(sta, tid, false); if (send_delba) ieee80211_send_delba(..., tid_tx->ndp); That read is not covered by an RCU read-side critical section, and it runs in preemptible process context: both callers hold the wiphy mutex, reaching it either from the ieee80211_ba_session_work() wiphy work or from ieee80211_sta_tear_down_BA_sessions() during station teardown. Softirqs can run in that window too, both from the local_bh_enable() that ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU callback can free tid_tx before the read. Driving the function from a test module with the grace period forced into that window, KASAN reports the read, and the free arrives on the ordinary RCU softirq path: BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400 Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10 [...] Freed by task 57: __kasan_slab_free+0x47/0x70 __rcu_free_sheaf_prepare+0x70/0x250 rcu_free_sheaf_nobarn+0x18/0x40 rcu_core+0x426/0x1310 handle_softirqs+0x144/0x590 __irq_exit_rcu+0xea/0x150 irq_exit_rcu+0x9/0x20 sysvec_apic_timer_interrupt+0x6b/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 send_delba is only set when tx_stop is set, which happens for AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown - session idle timeout, PTK rekey, suspend, HW reconfig - and not from a peer's DELBA. Read ndp into a local before the session is freed, while sta->lock is still held. tid_tx->ndp has a single writer, in ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here: both paths are serialised by the wiphy mutex, and the session is already marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only tid_tx dereference left after ieee80211_remove_tid_tx() in this function. Fixes: 98acd4c1d9f7 ("wifi: mac80211: add support for NDP ADDBA/DELBA for S1G") Assisted-by: Codex:gpt-5.6-sol Assisted-by: Kimi:K3 Cc: stable@vger.kernel.org Signed-off-by: Zhao Li Link: https://patch.msgid.link/20260728112156.96822-1-enderaoelyther@gmail.com [move/change the comment a bit to be more general not just on ndp, initialize ndp directly] Signed-off-by: Johannes Berg --- net/mac80211/agg-tx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 4833b46770b6..0832213430f4 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -915,6 +915,7 @@ void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid, struct tid_ampdu_tx *tid_tx) { struct ieee80211_sub_if_data *sdata = sta->sdata; + bool ndp = ndp = tid_tx->ndp; bool send_delba = false; bool start_txq = false; @@ -934,6 +935,7 @@ void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid, send_delba = true; ieee80211_remove_tid_tx(sta, tid); + /* tid_tx is now invalid since ieee80211_remove_tid_tx() frees it */ start_txq = true; unlock_sta: @@ -946,7 +948,7 @@ void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid, ieee80211_send_delba(sdata, sta->sta.addr, tid, WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE, - tid_tx->ndp); + ndp); } void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, -- cgit v1.2.3 From a2f5286ca4f304d3fd469f01b96b518608912a5c Mon Sep 17 00:00:00 2001 From: Deepanshu Kartikey Date: Sat, 25 Jul 2026 19:50:28 +0530 Subject: wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie() The KASAN allocation trace shows that a malformed IE buffer is stored via SIOCSIWGENIE (cfg80211_wext_siwgenie()) without any validation. The crash trace shows that a subsequent SIOCSIWESSID triggers a connection attempt which calls cfg80211_sme_get_conn_ies() to process the stored IE buffer, causing: - An out-of-bounds read in skip_ie() which reads ies[pos+1] (the length byte) past the end of the 1-byte buffer. - An integer underflow in the memcpy size argument when offs returned by ieee80211_ie_split() exceeds ies_len, causing unsigned subtraction to wrap to SIZE_MAX and triggering a fortify panic. Fix this by validating the IE buffer in cfg80211_wext_siwgenie() before storing it. Reported-by: syzbot+cc867e537e4bd36f69bb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=cc867e537e4bd36f69bb Signed-off-by: Deepanshu Kartikey Link: https://patch.msgid.link/20260725142028.32560-1-kartikey406@gmail.com [drop unnecessary ie_len check, update commit message] Signed-off-by: Johannes Berg --- net/wireless/wext-sme.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c index 573b6b15a446..b5914f3658db 100644 --- a/net/wireless/wext-sme.c +++ b/net/wireless/wext-sme.c @@ -319,6 +319,15 @@ int cfg80211_wext_siwgenie(struct net_device *dev, return 0; if (ie_len) { + const struct element *elem; + + for_each_element(elem, extra, ie_len) { + /* nothing */ + } + + if (!for_each_element_completed(elem, extra, ie_len)) + return -EINVAL; + ie = kmemdup(extra, ie_len, GFP_KERNEL); if (!ie) return -ENOMEM; -- cgit v1.2.3 From 99a948382af8a225e2d5e54a7052158cd6281cc6 Mon Sep 17 00:00:00 2001 From: Zhao Li Date: Tue, 28 Jul 2026 19:53:25 +0800 Subject: wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames mwifiex_11n_dispatch_amsdu_pkt() splits an A-MSDU with ieee80211_amsdu_to_8023s() and walks the resulting subframes. For each subframe it passes the subframe data pointer to mwifiex_process_tdls_action_frame(), but pairs it with skb->len, the length of the A-MSDU parent, instead of rx_skb->len: rx_skb = __skb_dequeue(&list); rx_hdr = (struct rx_packet_hdr *)rx_skb->data; if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && ntohs(rx_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) { mwifiex_process_tdls_action_frame(priv, (u8 *)rx_hdr, skb->len); } The parent is not a valid description of that buffer, and may not be valid memory at all. ieee80211_amsdu_to_8023s() ends with if (!reuse_skb) dev_kfree_skb(skb); and it only sets reuse_skb when the parent is linear, is not a head_frag, and is being consumed as the *last* subframe. So when the parent does not qualify for reuse it has already been freed, and the read of skb->len is a use-after-free. When it is reused, skb->len is the length of the last subframe, applied to every earlier subframe, which over-states the buffer whenever an earlier subframe is shorter. The callee cannot absorb a wrong length, because it derives its own ceiling from the value it is given. Each frame type computes ies_len = len - sizeof(struct ethhdr) - TDLS_*_FIX_LEN; and the element walk is then bounded entirely against that ceiling, for (end = pos + ies_len; pos + 1 < end; pos += 2 + pos[1]) { u8 ie_len = pos[1]; if (pos + 2 + ie_len > end) break; so a too-large len moves end past the end of the subframe and the walk reads and copies beyond it. The A-MSDU layout is chosen by the sender, which makes the difference between the last subframe and a shorter earlier one remotely selectable. Reaching this requires TDLS support in firmware and the TDLS ethertype on the subframe. The other caller, mwifiex_process_rx_packet(), is correct: it passes a pointer and a length that describe the same region of the RX buffer. Pass rx_skb->len, the length of the subframe actually being parsed. Fixes: 776f742040ca ("mwifiex: fix AMPDU not setup on TDLS link problem") Assisted-by: Codex:gpt-5.6-sol Assisted-by: Kimi:K3 Cc: stable@vger.kernel.org Signed-off-by: Zhao Li Link: https://patch.msgid.link/20260728115325.19128-1-enderaoelyther@gmail.com Signed-off-by: Johannes Berg --- drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c b/drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c index 610ec8302adf..9deb47f22a61 100644 --- a/drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c +++ b/drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c @@ -44,7 +44,7 @@ static int mwifiex_11n_dispatch_amsdu_pkt(struct mwifiex_private *priv, ntohs(rx_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) { mwifiex_process_tdls_action_frame(priv, (u8 *)rx_hdr, - skb->len); + rx_skb->len); } if (priv->bss_role == MWIFIEX_BSS_ROLE_UAP) -- cgit v1.2.3 From 04513922958005046f8b481c0f77212c556a9c38 Mon Sep 17 00:00:00 2001 From: Zhao Li Date: Fri, 24 Jul 2026 04:22:23 +0800 Subject: wifi: cfg80211: publish PMSR request before starting the driver nl80211_pmsr_start() assigns the request cookie, calls the driver's ->start_pmsr() callback, and only then adds the request to wdev->pmsr_list, without holding pmsr_lock for the addition. mac80211_hwsim saves the request in its start callback and returns. Since nl80211 uses parallel_ops, an immediate REPORT_PMSR can then run before nl80211_pmsr_start() reaches its post-start list_add_tail(). hwsim also dispatches reports from its virtio receive workqueue. Completion removes the request from wdev->pmsr_list under pmsr_lock and frees it. Thus completion can precede publication, race the unlocked list mutation, or free the request before nl80211_pmsr_start() reads req->cookie for the netlink reply. Add the request to wdev->pmsr_list under pmsr_lock before calling the driver, and use a cookie value saved before the call so the request is not dereferenced after a successful start. On an error return the driver has not retained or completed the request, so remove it from the list under the lock and free it. Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Link: https://lore.kernel.org/all/20260723010916.76433-1-enderaoelyther@gmail.com/ Assisted-by: Codex:gpt-5 Assisted-by: Claude:opus-4.8 Signed-off-by: Zhao Li Link: https://patch.msgid.link/20260723202223.99661-1-enderaoelyther@gmail.com Signed-off-by: Johannes Berg --- net/wireless/pmsr.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/net/wireless/pmsr.c b/net/wireless/pmsr.c index d1e2fae5bc0e..97449bcb9a22 100644 --- a/net/wireless/pmsr.c +++ b/net/wireless/pmsr.c @@ -420,6 +420,7 @@ int nl80211_pmsr_start(struct sk_buff *skb, struct genl_info *info) const struct cfg80211_pmsr_capabilities *capa; struct cfg80211_pmsr_request *req; struct nlattr *peers, *peer; + u64 cookie; capa = rdev->wiphy.pmsr_capa; @@ -521,14 +522,27 @@ int nl80211_pmsr_start(struct sk_buff *skb, struct genl_info *info) } req->cookie = cfg80211_assign_cookie(rdev); req->nl_portid = info->snd_portid; + cookie = req->cookie; + + /* + * Add to the list before the driver call; under races or broken + * drivers, completion may free the request before rdev_start_pmsr() + * returns. Use the saved cookie below. + */ + spin_lock_bh(&wdev->pmsr_lock); + list_add_tail(&req->list, &wdev->pmsr_list); + spin_unlock_bh(&wdev->pmsr_lock); err = rdev_start_pmsr(rdev, wdev, req); - if (err) + if (err) { + /* An error return leaves the request owned by this path. */ + spin_lock_bh(&wdev->pmsr_lock); + list_del(&req->list); + spin_unlock_bh(&wdev->pmsr_lock); goto out_err; + } - list_add_tail(&req->list, &wdev->pmsr_list); - - nl_set_extack_cookie_u64(info->extack, req->cookie); + nl_set_extack_cookie_u64(info->extack, cookie); return 0; out_err: kfree(req); -- cgit v1.2.3 From 0502d5077e419427d80f4d46ba95d0067f5fb916 Mon Sep 17 00:00:00 2001 From: Zhao Li Date: Thu, 23 Jul 2026 09:09:28 +0800 Subject: wifi: mac80211: validate individual TWT params before driver setup ieee80211_process_rx_twt_action() only partially validates a received S1G TWT setup frame before queueing it. An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup() with twt->length too short for the full struct ieee80211_twt_params. The individual path passes twt to drv_add_twt_setup(). Both the tracepoint and the driver callback consume the complete parameters block, not merely req_type. Do not pass a short individual agreement to the driver. Broadcast agreements remain unchanged because they are rejected locally after accessing only req_type. Fixes: f5a4c24e689f ("mac80211: introduce individual TWT support in AP mode") Assisted-by: Codex:gpt-5 Assisted-by: Claude:opus-4.8 Signed-off-by: Zhao Li Link: https://patch.msgid.link/20260723010928.76551-1-enderaoelyther@gmail.com [edit commit message to not overclaim lack of validation nor understate driver impact] Signed-off-by: Johannes Berg --- net/mac80211/s1g.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/s1g.c b/net/mac80211/s1g.c index 5af4a0c6c642..abc338e22e59 100644 --- a/net/mac80211/s1g.c +++ b/net/mac80211/s1g.c @@ -101,6 +101,10 @@ ieee80211_s1g_rx_twt_setup(struct ieee80211_sub_if_data *sdata, struct ieee80211_twt_setup *twt = (void *)mgmt->u.action.s1g.variable; struct ieee80211_twt_params *twt_agrt = (void *)twt->params; + if (!(twt->control & IEEE80211_TWT_CONTROL_NEG_TYPE_BROADCAST) && + twt->length < sizeof(twt->control) + sizeof(*twt_agrt)) + return; + twt_agrt->req_type &= cpu_to_le16(~IEEE80211_TWT_REQTYPE_REQUEST); /* broadcast TWT not supported yet */ -- cgit v1.2.3 From 57aa1718d5953dd532137d43b696c68545c2e0b3 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 24 Jul 2026 11:55:45 +0200 Subject: wifi: iwlegacy: replace BUG_ON() with WARN_ON() on num_stations check BUG_ON() for il->num_stations < 0 can happen in real word, see https://bugzilla.kernel.org/show_bug.cgi?id=221733 Replace BUG_ON() with WARN_ON() (and reset the counter to 0) to do not put whole system to inconsistent state on the condition. Also allocate debugfs buffer for all stations (32 or 25) to do not use num_stations since it might not be right. Signed-off-by: Stanislaw Gruszka Link: https://patch.msgid.link/20260724095545.33647-1-stf_xl@wp.pl [clarify commit message wrt. debugfs buffer] Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlegacy/common.c | 7 ++++--- drivers/net/wireless/intel/iwlegacy/debug.c | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/intel/iwlegacy/common.c b/drivers/net/wireless/intel/iwlegacy/common.c index 8d0ff339ad08..0bb807ff8edf 100644 --- a/drivers/net/wireless/intel/iwlegacy/common.c +++ b/drivers/net/wireless/intel/iwlegacy/common.c @@ -2179,8 +2179,8 @@ il_remove_station(struct il_priv *il, const u8 sta_id, const u8 * addr) il->stations[sta_id].used &= ~IL_STA_DRIVER_ACTIVE; il->num_stations--; - - BUG_ON(il->num_stations < 0); + if (WARN_ON(il->num_stations < 0)) + il->num_stations = 0; spin_unlock_irqrestore(&il->sta_lock, flags); @@ -2328,7 +2328,8 @@ il_dealloc_bcast_stations(struct il_priv *il) il->stations[i].used &= ~IL_STA_UCODE_ACTIVE; il->num_stations--; - BUG_ON(il->num_stations < 0); + if (WARN_ON(il->num_stations < 0)) + il->num_stations = 0; kfree(il->stations[i].lq); il->stations[i].lq = NULL; } diff --git a/drivers/net/wireless/intel/iwlegacy/debug.c b/drivers/net/wireless/intel/iwlegacy/debug.c index d998a3f1b056..8a9f79ff1c6e 100644 --- a/drivers/net/wireless/intel/iwlegacy/debug.c +++ b/drivers/net/wireless/intel/iwlegacy/debug.c @@ -396,7 +396,7 @@ il_dbgfs_stations_read(struct file *file, char __user *user_buf, size_t count, int i, j, pos = 0; ssize_t ret; /* Add 30 for initial string */ - const size_t bufsz = 30 + sizeof(char) * 500 * (il->num_stations); + const size_t bufsz = 30 + sizeof(char) * 500 * max_sta; buf = kmalloc(bufsz, GFP_KERNEL); if (!buf) -- cgit v1.2.3 From a81fc9266e1c5fef9ccf675a9b44b2f4ab464923 Mon Sep 17 00:00:00 2001 From: Yichong Chen Date: Mon, 27 Jul 2026 14:07:12 +0100 Subject: netfs: clear PG_private_2 on copy-to-cache append failure netfs_pgpriv2_copy_to_cache() marks the folio with PG_private_2 before netfs_pgpriv2_copy_folio() appends it to the copy-to-cache rolling buffer. If the append fails, the folio is not queued for cache writeback, so the PG_private_2 state and its reference must be released immediately. Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Signed-off-by: Yichong Chen Signed-off-by: David Howells Link: https://patch.msgid.link/20260727130716.1099906-2-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/netfs/read_pgpriv2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/netfs/read_pgpriv2.c b/fs/netfs/read_pgpriv2.c index a1489aa29f78..7eacc58abadb 100644 --- a/fs/netfs/read_pgpriv2.c +++ b/fs/netfs/read_pgpriv2.c @@ -54,6 +54,7 @@ static void netfs_pgpriv2_copy_folio(struct netfs_io_request *creq, struct folio /* Attach the folio to the rolling buffer. */ if (rolling_buffer_append(&creq->buffer, folio, 0) < 0) { + folio_end_private_2(folio); clear_bit(NETFS_RREQ_FOLIO_COPY_TO_CACHE, &creq->flags); return; } -- cgit v1.2.3 From 37a1c535c80c67d98668d190c7432f9ebda43310 Mon Sep 17 00:00:00 2001 From: Yichong Chen Date: Mon, 27 Jul 2026 14:07:13 +0100 Subject: netfs: handle single writeback rolling buffer allocation failure netfs_write_folio_single() takes an extra folio reference before appending the folio to the rolling buffer. rolling_buffer_append() can fail if it cannot allocate another folio_queue. Check the return value and drop the extra folio reference before returning the error. Fixes: 49866ce7ea8d ("netfs: Add support for caching single monolithic objects such as AFS dirs") Signed-off-by: Yichong Chen Signed-off-by: David Howells Link: https://patch.msgid.link/20260727130716.1099906-3-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/netfs/write_issue.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/netfs/write_issue.c b/fs/netfs/write_issue.c index f2761c99795a..14efe4cb9393 100644 --- a/fs/netfs/write_issue.c +++ b/fs/netfs/write_issue.c @@ -720,6 +720,7 @@ static int netfs_write_folio_single(struct netfs_io_request *wreq, size_t iter_off = 0; size_t fsize = folio_size(folio), flen; loff_t fpos = folio_pos(folio); + ssize_t ret; bool to_eof = false; bool no_debug = false; @@ -748,7 +749,11 @@ static int netfs_write_folio_single(struct netfs_io_request *wreq, /* Attach the folio to the rolling buffer. */ folio_get(folio); - rolling_buffer_append(&wreq->buffer, folio, NETFS_ROLLBUF_PUT_MARK); + ret = rolling_buffer_append(&wreq->buffer, folio, NETFS_ROLLBUF_PUT_MARK); + if (ret < 0) { + folio_put(folio); + return ret; + } /* Move the submission point forward to allow for write-streaming data * not starting at the front of the page. We don't do write-streaming -- cgit v1.2.3 From 87eb3d272dcbcbbfe5c1576c10e5dc72810cf1f6 Mon Sep 17 00:00:00 2001 From: Yichong Chen Date: Mon, 27 Jul 2026 14:07:14 +0100 Subject: netfs: release readahead folios on iterator preparation failure netfs_prepare_read_iterator() batches readahead folios in put_batch so that the folio references can be dropped after the I/O iterator has been prepared. If rolling_buffer_load_from_ra() fails after earlier folios have been batched, the function returns immediately and leaves those references held. Release the batch before returning the error. Fixes: 06fa229ceb36 ("netfs: Abstract out a rolling folio buffer implementation") Signed-off-by: Yichong Chen Signed-off-by: David Howells Link: https://patch.msgid.link/20260727130716.1099906-4-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/netfs/buffered_read.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index 24a8a5418e31..3d86414ee40f 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -102,8 +102,10 @@ static ssize_t netfs_prepare_read_iterator(struct netfs_io_subrequest *subreq, added = rolling_buffer_load_from_ra(&rreq->buffer, ractl, &put_batch); - if (added < 0) + if (added < 0) { + folio_batch_release(&put_batch); return added; + } rreq->submitted += added; } folio_batch_release(&put_batch); -- cgit v1.2.3 From 1d78d56c43ef3768183e8370e7367b162700e049 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 27 Jul 2026 14:07:15 +0100 Subject: netfs: Fix folio_queue ENOMEM in writeback by adding a mempool Fix the handling of folio_queue allocation failure in writeback by adding a mempool and passing in gfp_t flags to the rolling buffer functions that allocate memory, using the mempool if gfp != GFP_KERNEL. This is then extended upwards and the gfp to be used for a request is stored in the netfs_io_request struct and is then used for both requests and subrequests, eliminating the sleeping loops there. The failure caused: folio != NULL WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 Fixes: cd0277ed0c18 ("netfs: Use new folio_queue data type and iterator instead of xarray iter") Reported-by: syzbot+0da43efa72f88bd3a8af@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0da43efa72f88bd3a8af Signed-off-by: David Howells Link: https://patch.msgid.link/20260727130716.1099906-5-dhowells@redhat.com Tested-by: syzbot+0da43efa72f88bd3a8af@syzkaller.appspotmail.com cc: Paulo Alcantara cc: Yun Zhou cc: Matthew Wilcox cc: Christoph Hellwig cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/netfs/buffered_read.c | 6 +++--- fs/netfs/internal.h | 1 + fs/netfs/main.c | 7 +++++++ fs/netfs/objects.c | 30 +++++++++++++++++------------- fs/netfs/read_pgpriv2.c | 2 +- fs/netfs/rolling_buffer.c | 22 +++++++++++++--------- fs/netfs/write_issue.c | 10 +++++----- include/linux/netfs.h | 1 + include/linux/rolling_buffer.h | 6 +++--- 9 files changed, 51 insertions(+), 34 deletions(-) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index 3d86414ee40f..7fdfa4f27e34 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -361,7 +361,7 @@ void netfs_readahead(struct readahead_control *ractl) netfs_rreq_expand(rreq, ractl); rreq->submitted = rreq->start; - if (rolling_buffer_init(&rreq->buffer, rreq->debug_id, ITER_DEST) < 0) + if (rolling_buffer_init(&rreq->buffer, rreq->debug_id, ITER_DEST, rreq->gfp) < 0) goto cleanup_free; netfs_read_to_pagecache(rreq, ractl); @@ -380,10 +380,10 @@ static int netfs_create_singular_buffer(struct netfs_io_request *rreq, struct fo { ssize_t added; - if (rolling_buffer_init(&rreq->buffer, rreq->debug_id, ITER_DEST) < 0) + if (rolling_buffer_init(&rreq->buffer, rreq->debug_id, ITER_DEST, rreq->gfp) < 0) return -ENOMEM; - added = rolling_buffer_append(&rreq->buffer, folio, rollbuf_flags); + added = rolling_buffer_append(&rreq->buffer, folio, rollbuf_flags, rreq->gfp); if (added < 0) return added; rreq->submitted = rreq->start + added; diff --git a/fs/netfs/internal.h b/fs/netfs/internal.h index d889caa401dc..420ee7b26580 100644 --- a/fs/netfs/internal.h +++ b/fs/netfs/internal.h @@ -43,6 +43,7 @@ extern struct list_head netfs_io_requests; extern spinlock_t netfs_proc_lock; extern mempool_t netfs_request_pool; extern mempool_t netfs_subrequest_pool; +extern mempool_t netfs_folioq_pool; #ifdef CONFIG_PROC_FS static inline void netfs_proc_add_rreq(struct netfs_io_request *rreq) diff --git a/fs/netfs/main.c b/fs/netfs/main.c index 73da6c9f5777..927badf3989d 100644 --- a/fs/netfs/main.c +++ b/fs/netfs/main.c @@ -28,6 +28,7 @@ static struct kmem_cache *netfs_request_slab; static struct kmem_cache *netfs_subrequest_slab; mempool_t netfs_request_pool; mempool_t netfs_subrequest_pool; +mempool_t netfs_folioq_pool; #ifdef CONFIG_PROC_FS LIST_HEAD(netfs_io_requests); @@ -108,6 +109,9 @@ static int __init netfs_init(void) { int ret = -ENOMEM; + if (mempool_init_kmalloc_pool(&netfs_folioq_pool, 100, sizeof(struct folio_queue)) < 0) + goto error_folioq_pool; + netfs_request_slab = kmem_cache_create("netfs_request", sizeof(struct netfs_io_request), 0, SLAB_HWCACHE_ALIGN | SLAB_ACCOUNT, @@ -160,6 +164,8 @@ error_subreq: error_reqpool: kmem_cache_destroy(netfs_request_slab); error_req: + mempool_exit(&netfs_folioq_pool); +error_folioq_pool: return ret; } fs_initcall(netfs_init); @@ -172,5 +178,6 @@ static void __exit netfs_exit(void) kmem_cache_destroy(netfs_subrequest_slab); mempool_exit(&netfs_request_pool); kmem_cache_destroy(netfs_request_slab); + mempool_exit(&netfs_folioq_pool); } module_exit(netfs_exit); diff --git a/fs/netfs/objects.c b/fs/netfs/objects.c index b8c4918d3dcd..01461a74642d 100644 --- a/fs/netfs/objects.c +++ b/fs/netfs/objects.c @@ -7,7 +7,6 @@ #include #include -#include #include "internal.h" static void netfs_free_request(struct work_struct *work); @@ -26,17 +25,23 @@ struct netfs_io_request *netfs_alloc_request(struct address_space *mapping, struct netfs_io_request *rreq; mempool_t *mempool = ctx->ops->request_pool ?: &netfs_request_pool; struct kmem_cache *cache = mempool->pool_data; + gfp_t gfp = GFP_KERNEL; int ret; - for (;;) { - rreq = mempool_alloc(mempool, GFP_KERNEL); - if (rreq) - break; - msleep(10); + /* Writeback is part of memory reclaim and must not fail due to ENOMEM. */ + if (origin == NETFS_WRITEBACK || origin == NETFS_WRITEBACK_SINGLE) { + gfp = GFP_NOFS; /* Allows use of mempools. */ + + rreq = mempool_alloc(mempool, gfp); + } else { + rreq = mempool->alloc(gfp, mempool->pool_data); + if (!rreq) + return ERR_PTR(-ENOMEM); } memset(rreq, 0, kmem_cache_size(cache)); INIT_WORK(&rreq->cleanup_work, netfs_free_request); + rreq->gfp = gfp; rreq->start = start; rreq->len = len; rreq->origin = origin; @@ -200,13 +205,12 @@ struct netfs_io_subrequest *netfs_alloc_subrequest(struct netfs_io_request *rreq mempool_t *mempool = rreq->netfs_ops->subrequest_pool ?: &netfs_subrequest_pool; struct kmem_cache *cache = mempool->pool_data; - for (;;) { - subreq = mempool_alloc(rreq->netfs_ops->subrequest_pool ?: &netfs_subrequest_pool, - GFP_KERNEL); - if (subreq) - break; - msleep(10); - } + if (rreq->gfp == GFP_KERNEL) + subreq = mempool->alloc(rreq->gfp, mempool->pool_data); + else + subreq = mempool_alloc(mempool, rreq->gfp); + if (!subreq) + return NULL; memset(subreq, 0, kmem_cache_size(cache)); INIT_WORK(&subreq->work, NULL); diff --git a/fs/netfs/read_pgpriv2.c b/fs/netfs/read_pgpriv2.c index 7eacc58abadb..c31190993b76 100644 --- a/fs/netfs/read_pgpriv2.c +++ b/fs/netfs/read_pgpriv2.c @@ -53,7 +53,7 @@ static void netfs_pgpriv2_copy_folio(struct netfs_io_request *creq, struct folio trace_netfs_folio(folio, netfs_folio_trace_store_copy); /* Attach the folio to the rolling buffer. */ - if (rolling_buffer_append(&creq->buffer, folio, 0) < 0) { + if (rolling_buffer_append(&creq->buffer, folio, 0, creq->gfp) < 0) { folio_end_private_2(folio); clear_bit(NETFS_RREQ_FOLIO_COPY_TO_CACHE, &creq->flags); return; diff --git a/fs/netfs/rolling_buffer.c b/fs/netfs/rolling_buffer.c index a17fbf9853a4..8c0026836f9c 100644 --- a/fs/netfs/rolling_buffer.c +++ b/fs/netfs/rolling_buffer.c @@ -6,6 +6,7 @@ */ #include +#include #include #include #include @@ -27,7 +28,10 @@ struct folio_queue *netfs_folioq_alloc(unsigned int rreq_id, gfp_t gfp, { struct folio_queue *fq; - fq = kmalloc_obj(*fq, gfp); + if (gfp == GFP_KERNEL) + fq = netfs_folioq_pool.alloc(gfp, netfs_folioq_pool.pool_data); + else + fq = mempool_alloc(&netfs_folioq_pool, gfp); if (fq) { netfs_stat(&netfs_n_folioq); folioq_init(fq, rreq_id); @@ -50,7 +54,7 @@ void netfs_folioq_free(struct folio_queue *folioq, { trace_netfs_folioq(folioq, trace); netfs_stat_d(&netfs_n_folioq); - kfree(folioq); + mempool_free(folioq, &netfs_folioq_pool); } EXPORT_SYMBOL(netfs_folioq_free); @@ -60,11 +64,11 @@ EXPORT_SYMBOL(netfs_folioq_free); * consumer. */ int rolling_buffer_init(struct rolling_buffer *roll, unsigned int rreq_id, - unsigned int direction) + unsigned int direction, gfp_t gfp) { struct folio_queue *fq; - fq = netfs_folioq_alloc(rreq_id, GFP_NOFS, netfs_trace_folioq_rollbuf_init); + fq = netfs_folioq_alloc(rreq_id, gfp, netfs_trace_folioq_rollbuf_init); if (!fq) return -ENOMEM; @@ -77,14 +81,14 @@ int rolling_buffer_init(struct rolling_buffer *roll, unsigned int rreq_id, /* * Add another folio_queue to a rolling buffer if there's no space left. */ -int rolling_buffer_make_space(struct rolling_buffer *roll) +int rolling_buffer_make_space(struct rolling_buffer *roll, gfp_t gfp) { struct folio_queue *fq, *head = roll->head; if (!folioq_full(head)) return 0; - fq = netfs_folioq_alloc(head->rreq_id, GFP_NOFS, netfs_trace_folioq_make_space); + fq = netfs_folioq_alloc(head->rreq_id, gfp, netfs_trace_folioq_make_space); if (!fq) return -ENOMEM; fq->prev = head; @@ -122,7 +126,7 @@ ssize_t rolling_buffer_load_from_ra(struct rolling_buffer *roll, int nr, ix, to; ssize_t size = 0; - if (rolling_buffer_make_space(roll) < 0) + if (rolling_buffer_make_space(roll, GFP_KERNEL) < 0) return -ENOMEM; fq = roll->head; @@ -153,12 +157,12 @@ ssize_t rolling_buffer_load_from_ra(struct rolling_buffer *roll, * Append a folio to the rolling buffer. */ ssize_t rolling_buffer_append(struct rolling_buffer *roll, struct folio *folio, - unsigned int flags) + unsigned int flags, gfp_t gfp) { ssize_t size = folio_size(folio); int slot; - if (rolling_buffer_make_space(roll) < 0) + if (rolling_buffer_make_space(roll, gfp) < 0) return -ENOMEM; slot = folioq_append(roll->head, folio); diff --git a/fs/netfs/write_issue.c b/fs/netfs/write_issue.c index 14efe4cb9393..2d9cfcd43658 100644 --- a/fs/netfs/write_issue.c +++ b/fs/netfs/write_issue.c @@ -108,7 +108,7 @@ struct netfs_io_request *netfs_create_write_req(struct address_space *mapping, ictx = netfs_inode(wreq->inode); if (is_cacheable) fscache_begin_write_operation(&wreq->cache_resources, netfs_i_cookie(ictx)); - if (rolling_buffer_init(&wreq->buffer, wreq->debug_id, ITER_SOURCE) < 0) + if (rolling_buffer_init(&wreq->buffer, wreq->debug_id, ITER_SOURCE, wreq->gfp) < 0) goto nomem; wreq->cleaned_to = wreq->start; @@ -167,7 +167,7 @@ void netfs_prepare_write(struct netfs_io_request *wreq, */ if (iov_iter_is_folioq(wreq_iter) && wreq_iter->folioq_slot >= folioq_nr_slots(wreq_iter->folioq)) - rolling_buffer_make_space(&wreq->buffer); + rolling_buffer_make_space(&wreq->buffer, wreq->gfp); subreq = netfs_alloc_subrequest(wreq); subreq->source = stream->source; @@ -334,7 +334,7 @@ static int netfs_write_folio(struct netfs_io_request *wreq, _enter(""); - if (rolling_buffer_make_space(&wreq->buffer) < 0) + if (rolling_buffer_make_space(&wreq->buffer, wreq->gfp) < 0) return -ENOMEM; /* netfs_perform_write() may shift i_size around the page or from out @@ -436,7 +436,7 @@ static int netfs_write_folio(struct netfs_io_request *wreq, } /* Attach the folio to the rolling buffer. */ - rolling_buffer_append(&wreq->buffer, folio, 0); + rolling_buffer_append(&wreq->buffer, folio, 0, wreq->gfp); /* Move the submission point forward to allow for write-streaming data * not starting at the front of the page. We don't do write-streaming @@ -749,7 +749,7 @@ static int netfs_write_folio_single(struct netfs_io_request *wreq, /* Attach the folio to the rolling buffer. */ folio_get(folio); - ret = rolling_buffer_append(&wreq->buffer, folio, NETFS_ROLLBUF_PUT_MARK); + ret = rolling_buffer_append(&wreq->buffer, folio, NETFS_ROLLBUF_PUT_MARK, wreq->gfp); if (ret < 0) { folio_put(folio); return ret; diff --git a/include/linux/netfs.h b/include/linux/netfs.h index 1bc120d61c5b..d0b62d53eea9 100644 --- a/include/linux/netfs.h +++ b/include/linux/netfs.h @@ -255,6 +255,7 @@ struct netfs_io_request { unsigned long long cleaned_to; /* Position we've cleaned folios to */ unsigned long long abandon_to; /* Position to abandon folios to */ const struct folio *no_unlock_folio; /* Don't unlock this folio after read */ + gfp_t gfp; /* GFP flags to use */ unsigned int direct_bv_count; /* Number of elements in direct_bv[] */ unsigned int debug_id; unsigned int rsize; /* Maximum read size (0 for none) */ diff --git a/include/linux/rolling_buffer.h b/include/linux/rolling_buffer.h index ac15b1ffdd83..9e5dad29669c 100644 --- a/include/linux/rolling_buffer.h +++ b/include/linux/rolling_buffer.h @@ -43,13 +43,13 @@ struct rolling_buffer_snapshot { #define ROLLBUF_MARK_2 BIT(1) int rolling_buffer_init(struct rolling_buffer *roll, unsigned int rreq_id, - unsigned int direction); -int rolling_buffer_make_space(struct rolling_buffer *roll); + unsigned int direction, gfp_t gfp); +int rolling_buffer_make_space(struct rolling_buffer *roll, gfp_t gfp); ssize_t rolling_buffer_load_from_ra(struct rolling_buffer *roll, struct readahead_control *ractl, struct folio_batch *put_batch); ssize_t rolling_buffer_append(struct rolling_buffer *roll, struct folio *folio, - unsigned int flags); + unsigned int flags, gfp_t gfp); struct folio_queue *rolling_buffer_delete_spent(struct rolling_buffer *roll); void rolling_buffer_clear(struct rolling_buffer *roll); -- cgit v1.2.3 From 79055d82772b9584f259b747fe40ff56a076678d Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Tue, 28 Jul 2026 14:26:32 +0200 Subject: binfmt_misc: don't let an 'F' entry pin its own instance An entry registered with 'F' opens its interpreter at registration time and holds that file until the entry is freed. Any entry nobody removes by hand only gets closed once the binfmt_misc superblock is shut down. If the interpreter lives on a mount that keeps that superblock alive the two pin each other: binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb TL;DR the file is never closed. Once the mount namespace is gone there is nothing left to unregister through either. There are two ways to trigger this bug: - Point the interpreter at the instance itself. Its files are regular files owned by the mounter and both bm_get_inode() and simple_fill_super() leave i_op at empty_iops. So notify_change() falls back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC and so open_exec() accepts it. - Use the instance as an overlayfs lower layer. The overlay superblock holds a clone_private_mount() of every layer until it is destroyed and that clone is in no namespace. So umount_tree() never reaches it. That's a DoS. And it isn't only the superblock that leaks. It pins the user namespace it was mounted in, so every iteration permanently eats one of the caller's user namespace charges. So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on the instance's own files and s_stack_depth makes overlayfs reject the layer before it ever takes a clone. That also covers the ecryptfs and fuse passthrough variants. What 'F' promises is unchanged. The stable tag is narrower than the Fixes tags on purpose. Before sandboxed mounts this needed global root against the single instance everyone shares, and the change doesn't apply to those trees anyway. Note that SB_I_NODEV is implicitly raised for userns mounts but raise it explicitly here as well. Link: https://patch.msgid.link/20260728-work-binfmt_misc-selfpin-v1-1-74df5daeca5b@kernel.org Fixes: 948b701a607f ("binfmt_misc: add persistent opened binary handler for containers") Fixes: 21ca59b365c0 ("binfmt_misc: enable sandboxed mounts") Cc: stable@vger.kernel.org # v6.7+ Signed-off-by: Christian Brauner (Amutable) --- fs/binfmt_misc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c index 5de615ca7a75..47aeb2b68d3e 100644 --- a/fs/binfmt_misc.c +++ b/fs/binfmt_misc.c @@ -937,6 +937,10 @@ static int bm_fill_super(struct super_block *sb, struct fs_context *fc) if (WARN_ON(user_ns != current_user_ns())) return -EINVAL; + /* Never exec off this instance and never let anything stack on it. */ + sb->s_iflags |= SB_I_NOEXEC | SB_I_NODEV; + sb->s_stack_depth = FILESYSTEM_MAX_STACK_DEPTH; + /* * Lazily allocate a new binfmt_misc instance for this namespace, i.e. * do it here during the first mount of binfmt_misc. We don't need to -- cgit v1.2.3 From db1856ea9196cf6e015d12199a34c0b9313c7bfa Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Fri, 10 Jul 2026 11:33:02 +0200 Subject: binfmt_misc: restore write access when removing an entry Registering an entry with the MISC_FMT_OPEN_FILE flag opens the interpreter via open_exec() which denies write access to it for as long as the entry exists. Removing the entry closes the interpreter file via filp_close() but never restores write access, leaving the inode's i_writecount permanently negative. Opening the interpreter for writing keeps failing with ETXTBSY long after the entry is gone until the inode is evicted from the inode cache. Commit 90f601b497d7 ("binfmt_misc: restore write access before closing files opened by open_exec()") fixed the same imbalance in the error path of bm_register_write() but the actual removal path has been leaking the write denial since the introduction of the flag. Restore write access in put_binfmt_handler() before closing the interpreter file. Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-1-a162f7cb58d6@kernel.org Fixes: 948b701a607f ("binfmt_misc: add persistent opened binary handler for containers") Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/binfmt_misc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c index 47aeb2b68d3e..adab06d18550 100644 --- a/fs/binfmt_misc.c +++ b/fs/binfmt_misc.c @@ -162,8 +162,10 @@ static Node *get_binfmt_handler(struct binfmt_misc *misc, static void put_binfmt_handler(Node *e) { if (refcount_dec_and_test(&e->users)) { - if (e->flags & MISC_FMT_OPEN_FILE) + if (e->flags & MISC_FMT_OPEN_FILE) { + exe_file_allow_write_access(e->interp_file); filp_close(e->interp_file, NULL); + } kfree(e); } } -- cgit v1.2.3 From fa5990ca8fd917003e526036bcc50413edb9722c Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Fri, 10 Jul 2026 11:33:03 +0200 Subject: binfmt_misc: use exe_file_deny_write_access() for the interpreter clone For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the registered interpreter file and denies write access to the clone via plain deny_write_access(). The clone is installed as bprm->interpreter and later released by the exec machinery through exe_file_allow_write_access() which skips the i_writecount increment for files with FMODE_FSNOTIFY_HSM set. The deny and allow side can therefore come to different conclusions when pre-content watches are in play: if a pre-content watch is added to the interpreter after registration every subsequent exec through that entry takes a write denial on the clone that is never paired with a write allowance, driving the interpreter inode's i_writecount further down with each exec and leaving the interpreter unwritable even after the entry and all its users are gone. Take the write denial via exe_file_deny_write_access() so both sides of the pairing base their decision on the same file mode, and propagate failure instead of silently ignoring it: an interpreter that is concurrently open for writing now fails the exec with ETXTBSY, exactly like an interpreter freshly opened via open_exec() would. Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-2-a162f7cb58d6@kernel.org Fixes: 0357ef03c94e ("fs: don't block write during exec on pre-content watched files") Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/binfmt_misc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c index adab06d18550..bf7d6b975825 100644 --- a/fs/binfmt_misc.c +++ b/fs/binfmt_misc.c @@ -249,8 +249,14 @@ static int load_misc_binary(struct linux_binprm *bprm) if (fmt->flags & MISC_FMT_OPEN_FILE) { interp_file = file_clone_open(fmt->interp_file); - if (!IS_ERR(interp_file)) - deny_write_access(interp_file); + if (!IS_ERR(interp_file)) { + int err = exe_file_deny_write_access(interp_file); + + if (err) { + fput(interp_file); + interp_file = ERR_PTR(err); + } + } } else { interp_file = open_exec(fmt->interpreter); } -- cgit v1.2.3 From 8e85d50ba1117fd446bf9a250bd8a97d48384bdc Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Fri, 10 Jul 2026 11:33:04 +0200 Subject: binfmt_misc: reject a flag character as the field delimiter The registration string starts with a user chosen delimiter that separates the individual fields. So that the field parsers terminate even on a truncated string create_entry() pads the buffer with that same delimiter: memset(buf + count, del, 8); Most fields are scanned for the delimiter with strchr()/scanarg() and happily stop on the padding. The flags field is different: instead of scanning for the delimiter check_special_flags() consumes the flag characters 'P', 'O', 'C' and 'F' and stops at the first byte that is none of them, relying on the trailing delimiter to end the scan. If the delimiter is itself a flag character the padding no longer acts as a terminator. The scan swallows all eight padding bytes and keeps reading past the end of the allocation until it hits a byte that is not a flag character. For example registering PaPEPPxPPiP with 'P' as the delimiter (name "a", type extension, magic "x", interpreter "i", empty flags) leaves the flag scan running off the end of the buffer. The registration is rejected in the end because the parser does not stop exactly at buf + count, but only after the out of bounds read has already happened. With an unlucky allocation layout the scan can walk into an unmapped page; under KASAN it is reported as a slab out of bounds read. binfmt_misc mounts are available to unprivileged users in a user namespace so the read is reachable without privileges. Reject a delimiter that is one of the flag characters up front. Such a registration was always rejected anyway, only after the out of bounds read, so no valid registration string changes meaning. Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-3-a162f7cb58d6@kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/binfmt_misc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c index bf7d6b975825..a73a37b8a013 100644 --- a/fs/binfmt_misc.c +++ b/fs/binfmt_misc.c @@ -384,6 +384,10 @@ static Node *create_entry(const char __user *buffer, size_t count) pr_debug("register: delim: %#x {%c}\n", del, del); + /* A flag-char delimiter runs the flag scan off the buffer. */ + if (del == 'P' || del == 'O' || del == 'C' || del == 'F') + goto einval; + /* Pad the buffer with the delim to simplify parsing below. */ memset(buf + count, del, 8); -- cgit v1.2.3 From b8206f516fe7cbe785cf44bf09c17c438d7c3cad Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Tue, 28 Jul 2026 15:48:10 +0200 Subject: binfmt_misc: don't leak the user namespace when the mount fails bm_get_tree() takes a reference to the user namespace and hands it to get_tree_keyed() as the sget key. sget_fc() moves that reference into sb->s_fs_info and clears fc->s_fs_info, so from that point on the superblock owns it and bm_free() doesn't see it anymore. The superblock drops it in ->put_super(). But generic_shutdown_super() only calls ->put_super() from inside the if (sb->s_root) branch, so nothing releases it when bm_fill_super() fails: - The kzalloc_obj() failure leaves s_root NULL and the whole branch is skipped. - A simple_fill_super() failure in the file loop leaves s_root set, but s_op still points at simple_super_operations, which has no ->put_super(). bm_fill_super() installs s_ops only once simple_fill_super() returned success, and installing it earlier wouldn't help either because simple_fill_super() overwrites s_op. Either way vfs_get_super() calls deactivate_locked_super() and the reference is gone for good. binfmt_misc mounts are available in a user namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so an unprivileged caller under a tight memory cgroup can fail simple_fill_super() on demand and leak one user namespace per attempt. Drop the reference in ->kill_sb() instead, which runs unconditionally, the same way nfsd and rpc_pipefs release their keyed s_fs_info. That also stops ->put_super() from clearing s_fs_info while the superblock is still on @fs_supers. generic_shutdown_super() leaves it there on purpose so that sget_fc() keeps finding it until kill_sb() has run, but a NULL s_fs_info makes test_keyed_super() miss it, so a concurrent mount for the same user namespace skips the grab_super() wait and creates a second superblock for a namespace that is still being torn down. Link: https://patch.msgid.link/20260728-work-binfmt_misc-usernsleak-v1-1-dbd8d5e626e7@kernel.org Fixes: 21ca59b365c0 ("binfmt_misc: enable sandboxed mounts") Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) --- fs/binfmt_misc.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c index a73a37b8a013..c97f10b48b5b 100644 --- a/fs/binfmt_misc.c +++ b/fs/binfmt_misc.c @@ -921,18 +921,9 @@ static const struct file_operations bm_status_operations = { /* Superblock handling */ -static void bm_put_super(struct super_block *sb) -{ - struct user_namespace *user_ns = sb->s_fs_info; - - sb->s_fs_info = NULL; - put_user_ns(user_ns); -} - static const struct super_operations s_ops = { .statfs = simple_statfs, .evict_inode = bm_evict_inode, - .put_super = bm_put_super, }; static int bm_fill_super(struct super_block *sb, struct fs_context *fc) @@ -990,13 +981,12 @@ static int bm_fill_super(struct super_block *sb, struct fs_context *fc) /* * When the binfmt_misc superblock for this userns is shutdown * ->enabled might have been set to false and we don't reinitialize - * ->enabled again in put_super() as someone might already be mounting - * binfmt_misc again. It also would be pointless since by the time - * ->put_super() is called we know that the binary type list for this - * bintfmt_misc mount is empty making load_misc_binary() return - * -ENOEXEC independent of whether ->enabled is true. Instead, if - * someone mounts binfmt_misc for the first time or again we simply - * reset ->enabled to true. + * ->enabled again during shutdown as someone might already be mounting + * binfmt_misc again. It also would be pointless since by then we know + * that the binary type list for this binfmt_misc mount is empty making + * load_misc_binary() return -ENOEXEC independent of whether ->enabled + * is true. Instead, if someone mounts binfmt_misc for the first time or + * again we simply reset ->enabled to true. */ misc->enabled = true; @@ -1022,6 +1012,14 @@ static const struct fs_context_operations bm_context_ops = { .get_tree = bm_get_tree, }; +static void bm_kill_sb(struct super_block *sb) +{ + struct user_namespace *user_ns = sb->s_fs_info; + + kill_anon_super(sb); + put_user_ns(user_ns); +} + static int bm_init_fs_context(struct fs_context *fc) { fc->ops = &bm_context_ops; @@ -1038,7 +1036,7 @@ static struct file_system_type bm_fs_type = { .name = "binfmt_misc", .init_fs_context = bm_init_fs_context, .fs_flags = FS_USERNS_MOUNT, - .kill_sb = kill_anon_super, + .kill_sb = bm_kill_sb, }; MODULE_ALIAS_FS("binfmt_misc"); -- cgit v1.2.3 From e095f249e2209674f6366f6db0383a2b96e19239 Mon Sep 17 00:00:00 2001 From: Chenguang Zhao Date: Thu, 23 Jul 2026 13:57:35 +0800 Subject: net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq cookie), but mtk_poll_controller incorrectly passed the net_device *. Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled would then crash. Fixes: 8186f6e382d8 ("net-next: mediatek: fix compile error inside mtk_poll_controller()") Signed-off-by: Chenguang Zhao Link: https://patch.msgid.link/20260723055735.885112-1-chenguang.zhao@linux.dev Signed-off-by: Paolo Abeni --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 5d291e50a47b..351444fb4871 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -3467,7 +3467,7 @@ static void mtk_poll_controller(struct net_device *dev) mtk_tx_irq_disable(eth, MTK_TX_DONE_INT); mtk_rx_irq_disable(eth, eth->soc->rx.irq_done_mask); - mtk_handle_irq_rx(eth->irq[MTK_FE_IRQ_RX], dev); + mtk_handle_irq_rx(eth->irq[MTK_FE_IRQ_RX], eth); mtk_tx_irq_enable(eth, MTK_TX_DONE_INT); mtk_rx_irq_enable(eth, eth->soc->rx.irq_done_mask); } -- cgit v1.2.3 From 00a8ce2a2a9fa17674e1feec4d9105c1a5d6a419 Mon Sep 17 00:00:00 2001 From: Raushan Patel Date: Fri, 24 Jul 2026 11:14:35 +0530 Subject: tracing/probes: Reject $arg0 in meta argument expansion traceprobe_expand_meta_args() parses $argN with simple_strtoul() and calls sprint_nth_btf_arg(n - 1, ...). For $arg0, n is 0 so the index is -1. Because ctx->nr_params is signed, the "idx >= nr_params" guard in sprint_nth_btf_arg() does not catch the negative index, and ctx->params[-1].name_off is read out of bounds. The normal per-argument path (parse_probe_vars()) already rejects $arg0 via its argument-number check, but meta-argument expansion runs before per-argument parsing and substitutes the value first, bypassing that check. Reject $arg0 explicitly during expansion. Link: https://lore.kernel.org/all/20260724054435.146279-1-raushan.jhon@gmail.com/ Fixes: 18b1e870a496 ("tracing/probes: Add $arg* meta argument for all function args") Cc: stable@vger.kernel.org Signed-off-by: Raushan Patel Signed-off-by: Masami Hiramatsu (Google) --- kernel/trace/trace_probe.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c index 506e6037e163..c8fd9b946f44 100644 --- a/kernel/trace/trace_probe.c +++ b/kernel/trace/trace_probe.c @@ -1901,7 +1901,11 @@ const char **traceprobe_expand_meta_args(int argc, const char *argv[], trace_probe_log_err(0, BAD_VAR); return ERR_PTR(-ENOENT); } - /* Note: $argN starts from $arg1 */ + /* Note: $argN starts from $arg1, so $arg0 is invalid. */ + if (n == 0) { + trace_probe_log_err(0, BAD_ARG_NUM); + return ERR_PTR(-EINVAL); + } ret = sprint_nth_btf_arg(n - 1, type, buf + used, bufsize - used, ctx); if (ret < 0) -- cgit v1.2.3 From aca0cd1bf16574327ef64f3178e5f5e37a61ef0b Mon Sep 17 00:00:00 2001 From: Raushan Patel Date: Fri, 24 Jul 2026 12:12:08 +0530 Subject: tracing/fprobe: Roll back on enable_trace_fprobe() failure enable_trace_fprobe() sets the file link or the TP_FLAG_PROFILE flag and then registers each trace_fprobe in the probe list. If __register_trace_fprobe() fails partway through, the function returns immediately without unregistering the trace_fprobes it already registered or undoing the file link / flag it set, leaving the event half-enabled and leaking the registered fprobe(s). enable_trace_kprobe() already handles this with a rollback path. Do the same for fprobe: on failure, unregister all probes and clear the file link or profile flag. Link: https://lore.kernel.org/all/20260724064208.480030-1-raushan.jhon@gmail.com/ Fixes: 334e5519c375 ("tracing/probes: Add fprobe events for tracing function entry and exit.") Cc: stable@vger.kernel.org Signed-off-by: Raushan Patel Signed-off-by: Masami Hiramatsu (Google) --- kernel/trace/trace_fprobe.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_fprobe.c b/kernel/trace/trace_fprobe.c index 9f5f08c0e7c2..3120403a5b60 100644 --- a/kernel/trace/trace_fprobe.c +++ b/kernel/trace/trace_fprobe.c @@ -1481,11 +1481,21 @@ static int enable_trace_fprobe(struct trace_event_call *call, list_for_each_entry(tf, trace_probe_probe_list(tp), tp.list) { ret = __register_trace_fprobe(tf); if (ret < 0) - return ret; + goto err; } } return 0; + +err: + /* Failed to enable one of them. Roll back all */ + list_for_each_entry(tf, trace_probe_probe_list(tp), tp.list) + __unregister_trace_fprobe(tf); + if (file) + trace_probe_remove_file(tp, file); + else + trace_probe_clear_flag(tp, TP_FLAG_PROFILE); + return ret; } /* -- cgit v1.2.3 From 00d86dd5c2034e0e139e4806137b3b43e07ddd83 Mon Sep 17 00:00:00 2001 From: Carlos Song Date: Mon, 25 May 2026 11:04:00 +0800 Subject: i2c: imx: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. Fixes: 358025ac091e ("i2c: imx: make controller available until system suspend_noirq() and from resume_noirq()") Signed-off-by: Carlos Song Cc: # v6.14+ Reviewed-by: Frank Li Acked-by: Oleksij Rempel Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260525030400.3182911-1-carlos.song@oss.nxp.com --- drivers/i2c/busses/i2c-imx.c | 45 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 43 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index d5e6e2eca3b3..d549d630b41a 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1952,6 +1952,47 @@ static int i2c_imx_runtime_resume(struct device *dev) return 0; } +static int __maybe_unused i2c_imx_suspend_noirq(struct device *dev) +{ + struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); + int ret; + + i2c_mark_adapter_suspended(&i2c_imx->adapter); + + /* + * Cancel the slave timer before powering down to prevent + * i2c_imx_slave_timeout() from accessing hardware registers + * while the clock is disabled. + */ + hrtimer_cancel(&i2c_imx->slave_timer); + + ret = pm_runtime_force_suspend(dev); + if (ret) { + i2c_mark_adapter_resumed(&i2c_imx->adapter); + if (i2c_imx->slave) { + hrtimer_forward_now(&i2c_imx->slave_timer, I2C_IMX_CHECK_DELAY); + hrtimer_restart(&i2c_imx->slave_timer); + } + return ret; + } + + return 0; +} + +static int __maybe_unused i2c_imx_resume_noirq(struct device *dev) +{ + struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); + int ret; + + ret = pm_runtime_force_resume(dev); + if (ret) + return ret; + + i2c_mark_adapter_resumed(&i2c_imx->adapter); + + return 0; +} + static int i2c_imx_suspend(struct device *dev) { /* @@ -1985,8 +2026,8 @@ static int i2c_imx_resume(struct device *dev) } static const struct dev_pm_ops i2c_imx_pm_ops = { - NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, - pm_runtime_force_resume) + NOIRQ_SYSTEM_SLEEP_PM_OPS(i2c_imx_suspend_noirq, + i2c_imx_resume_noirq) SYSTEM_SLEEP_PM_OPS(i2c_imx_suspend, i2c_imx_resume) RUNTIME_PM_OPS(i2c_imx_runtime_suspend, i2c_imx_runtime_resume, NULL) }; -- cgit v1.2.3 From bba13ad17b1a11b3f1ed9b3a5d556191d7755a59 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Mon, 27 Jul 2026 10:36:59 +0200 Subject: of/address: Fix NULL bus dereference in of_pci_range_parser_one() The bus matching rework made of_match_bus() return NULL for nodes with ranges/dma-ranges but no local #address-cells. parser_init() stored that NULL bus, and the range iterator later dereferenced it. Reject such nodes in parser_init(), leaving an explicit empty iterator for callers that ignore the init return, and make of_dma_get_max_cpu_address() honour the init failure so a rejected node cannot clamp the DMA limit. Fixes: 64ee3cf096ac ("of/address: Rework bus matching to avoid warnings") Cc: stable@vger.kernel.org Signed-off-by: Carlo Caione Link: https://patch.msgid.link/20260727-of-range-parser-null-bus-v3-1-be01b708a4ce@baylibre.com Signed-off-by: Rob Herring (Arm) --- drivers/of/address.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/of/address.c b/drivers/of/address.c index cf4aab11e9b1..499d37ceae21 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -753,6 +753,7 @@ EXPORT_SYMBOL(of_property_read_reg); static int parser_init(struct of_pci_range_parser *parser, struct device_node *node, const char *name) { + const __be32 *range; int rlen; parser->node = node; @@ -761,12 +762,20 @@ static int parser_init(struct of_pci_range_parser *parser, parser->ns = of_bus_n_size_cells(node); parser->dma = !strcmp(name, "dma-ranges"); parser->bus = of_match_bus(node); + parser->range = NULL; + parser->end = NULL; - parser->range = of_get_property(node, name, &rlen); - if (parser->range == NULL) + range = of_get_property(node, name, &rlen); + if (!range) return -ENOENT; - parser->end = parser->range + rlen / sizeof(__be32); + if (!parser->bus || + !OF_CHECK_COUNTS(parser->na, parser->ns) || + !OF_CHECK_ADDR_COUNT(parser->pna)) + return -EINVAL; + + parser->range = range; + parser->end = range + rlen / sizeof(__be32); return 0; } @@ -792,7 +801,7 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser, int na = parser->na; int ns = parser->ns; int np = parser->pna + na + ns; - int busflag_na = parser->bus->flag_cells; + int busflag_na; if (!range) return NULL; @@ -800,6 +809,8 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser, if (!parser->range || parser->range + np > parser->end) return NULL; + busflag_na = parser->bus->flag_cells; + range->flags = parser->bus->get_flags(parser->range); range->bus_addr = of_read_number(parser->range + busflag_na, na - busflag_na); @@ -976,8 +987,7 @@ phys_addr_t __init of_dma_get_max_cpu_address(struct device_node *np) np = of_root; ranges = of_get_property(np, "dma-ranges", &len); - if (ranges && len) { - of_dma_range_parser_init(&parser, np); + if (ranges && len && !of_dma_range_parser_init(&parser, np)) { for_each_of_range(&parser, &range) if (range.cpu_addr + range.size > cpu_end) cpu_end = range.cpu_addr + range.size - 1; -- cgit v1.2.3 From 0e65cd9e5d41c34f86b7c347967bedac54926041 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 21 Jul 2026 18:31:49 +0200 Subject: KVM: VMX: add memory clobber to asm for VMX instructions VMCLEAR/VMREAD/VMWRITE/VMPTRLD access the internal VMCS cache, which is not visible to the compiler; without a memory clobber, the compiler can reorder them in troublesome ways because "asm volatile" and "asm goto" only protect against removal of the asm. For example, placing a VMWRITE before the corresponding VMCS pointer is loaded can lead to corruption. While none of this has been observed, it is better to prevent than cure. Likewise, INVEPT and INVVPID access the TLB and, even though in their case the effect is only visible to the next VMLAUNCH/VMRESUME, it is technically correct to add the clobber there too. So avoid any urge to special case them, and simply hardcode "memory" into the clobber list of vmx_asm1() and vmx_asm2(). __vmcs_readl() open-codes its own asm, so add the clobber there as well. Link: https://lore.kernel.org/kvm/CABgObfbL3t21yVeSwiLSjjOUER+rTYDPHYAH9YU4TWGRjx6XHg@mail.gmail.com/ Cc: Sean Christopherson Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/vmx_ops.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/vmx/vmx_ops.h b/arch/x86/kvm/vmx/vmx_ops.h index 81784befaaf4..9ffe03a0c223 100644 --- a/arch/x86/kvm/vmx/vmx_ops.h +++ b/arch/x86/kvm/vmx/vmx_ops.h @@ -101,7 +101,7 @@ static __always_inline unsigned long __vmcs_readl(unsigned long field) : [output] "=r" (value) : [field] "r" (field) - : "cc" + : "cc", "memory" : do_fail, do_exception); return value; @@ -145,7 +145,7 @@ do_exception: : ASM_CALL_CONSTRAINT, [output] "=&r" (value) : [field] "r" (field) - : "cc"); + : "cc", "memory"); return value; #endif /* CONFIG_CC_HAS_ASM_GOTO_OUTPUT */ @@ -192,7 +192,7 @@ do { \ asm goto("1: " __stringify(insn) " %0\n\t" \ "jna %l[error]\n\t" \ _ASM_EXTABLE(1b, %l[fault]) \ - : : op1 : "cc" : error, fault); \ + : : op1 : "cc", "memory" : error, fault); \ return; \ error: \ instrumentation_begin(); \ @@ -208,7 +208,7 @@ do { \ asm goto("1: " __stringify(insn) " %1, %0\n\t" \ "jna %l[error]\n\t" \ _ASM_EXTABLE(1b, %l[fault]) \ - : : op1, op2 : "cc" : error, fault); \ + : : op1, op2 : "cc", "memory" : error, fault);\ return; \ error: \ instrumentation_begin(); \ -- cgit v1.2.3 From 9910e835580fef3bef53b70241dd00c4bffad693 Mon Sep 17 00:00:00 2001 From: Weiming Shi Date: Mon, 27 Jul 2026 10:17:18 -0700 Subject: KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs Cancel (and flush) the I/O APIC's delayed EOI handling work during the "pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI broadcast will inject another IRQ if the line is asserted, i.e. will try to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs are destroyed leads to UAF if the delayed work is processed after vCPUs are destroyed. BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250 Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218 CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events kvm_ioapic_eoi_inject_work Call Trace: __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c:595 __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250 __kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345 kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129 ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492 kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532 process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e. requires a live vCPU. Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase of VM destruction, but that gets more than a bit sketchy as KVM expects the I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization in particular has a bad habit of touching VM-scope state during vCPU destruction. E.g. attempting to free the PIC during the pre phase would lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not hard to imagine the I/O APIC having a similar flaw. Fixes: 17bcd7144263 ("KVM: x86: Free vCPUs before freeing VM state") Reported-by: Reported-by: Zhong Wang Reported-by: Xuanqing Shi Cc: stable@vger.kernel.org Signed-off-by: Weiming Shi Co-developed-by: Sean Christopherson Signed-off-by: Sean Christopherson Message-ID: <20260727171718.543491-1-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index afcac1042947..47cb9eba113b 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -13429,9 +13429,15 @@ void kvm_arch_pre_destroy_vm(struct kvm *kvm) * iterating over vCPUs in a different task while vCPUs are being freed * is unsafe, i.e. will lead to use-after-free. The PIT also needs to * be stopped before IRQ routing is freed. + * + * Do NOT free the in-kernel PIC or I/O APIC here (but as above, make + * sure to flush any background work), as KVM expects interrupt routing + * structures to be valid until vCPUs are destroyed. */ #ifdef CONFIG_KVM_IOAPIC kvm_free_pit(kvm); + if (kvm->arch.vioapic) + cancel_delayed_work_sync(&kvm->arch.vioapic->eoi_inject); #endif kvm_mmu_pre_destroy_vm(kvm); -- cgit v1.2.3 From a19038a200f18d9e74ac30081797917d0886e16b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 28 Jul 2026 08:41:40 -0700 Subject: hwmon: (pmbus) Fix return value from pmbus_update_byte_data() pmbus_update_byte_data() is supposed to return a negative error code or 0. However, if no change is made to the register, it actually returns the register value. This can result in problems if the calling code explicitly expects to see an error code or 0. Fix it to return 0 on success or the error code as expected. Fixes: 11c119986f270 ("hwmon: (pmbus) add helpers for byte write and read modify write") Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 0081f16c3a95..5567d37f13fe 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -513,7 +513,7 @@ int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg, if (tmp != rv) rv = _pmbus_write_byte_data(client, page, reg, tmp); - return rv; + return rv < 0 ? rv : 0; } EXPORT_SYMBOL_NS_GPL(pmbus_update_byte_data, "PMBUS"); -- cgit v1.2.3 From 0f38453cdb2e17566ccb7c0f3dabd5bd21caca26 Mon Sep 17 00:00:00 2001 From: Jinu Kim Date: Tue, 21 Jul 2026 19:35:11 +0900 Subject: KVM: x86/mmu: Check write tracking in all address spaces kvm_gfn_is_write_tracked() checks only the supplied memslot, but page tracking is per-address-space and shadow pages are shared across all address spaces. With SMM, a GFN can therefore be write-tracked in one address space and appear untracked through the other. Check the supplied slot first, then the slot for the other address space. This ensures all callers honor write tracking regardless of the active address space. In particular, it prevents mmu_try_to_unsync_pages() from marking an upper-level shadow page unsync and eventually triggering the BUG in pte_list_remove(). Fixes: 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") Assisted-by: Codex:GPT-5 Signed-off-by: Jinu Kim Message-ID: <20260721103512.2136240-2-kimjw04271234@gmail.com> [invert direction of the conditional. - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu/page_track.c | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/arch/x86/kvm/mmu/page_track.c b/arch/x86/kvm/mmu/page_track.c index 1b17b12393a8..7e8195a311bb 100644 --- a/arch/x86/kvm/mmu/page_track.c +++ b/arch/x86/kvm/mmu/page_track.c @@ -130,13 +130,23 @@ void __kvm_write_track_remove_gfn(struct kvm *kvm, kvm_mmu_gfn_allow_lpage(slot, gfn); } -/* - * check if the corresponding access on the specified guest page is tracked. - */ +static bool __kvm_gfn_is_write_tracked(const struct kvm_memory_slot *slot, + gfn_t gfn) +{ + int index; + + if (!slot) + return false; + + index = gfn_to_index(gfn, slot->base_gfn, PG_LEVEL_4K); + return !!READ_ONCE(slot->arch.gfn_write_track[index]); +} + +/* check if write access is tracked on the specified guest page. */ bool kvm_gfn_is_write_tracked(struct kvm *kvm, const struct kvm_memory_slot *slot, gfn_t gfn) { - int index; + const struct kvm_memory_slot *other_slot; if (!slot) return false; @@ -144,8 +154,18 @@ bool kvm_gfn_is_write_tracked(struct kvm *kvm, if (!kvm_page_track_write_tracking_enabled(kvm)) return false; - index = gfn_to_index(gfn, slot->base_gfn, PG_LEVEL_4K); - return !!READ_ONCE(slot->arch.gfn_write_track[index]); + BUILD_BUG_ON(KVM_MAX_NR_ADDRESS_SPACES > 2); + + if (__kvm_gfn_is_write_tracked(slot, gfn)) + return true; + + if (kvm_arch_nr_memslot_as_ids(kvm) > 1) { + other_slot = __gfn_to_memslot(__kvm_memslots(kvm, slot->as_id ^ 1), gfn); + if (__kvm_gfn_is_write_tracked(other_slot, gfn)) + return true; + } + + return false; } #ifdef CONFIG_KVM_EXTERNAL_WRITE_TRACKING -- cgit v1.2.3 From 2e8a2c1b03068d76782343446f1b2114ae2ee0bd Mon Sep 17 00:00:00 2001 From: Jinu Kim Date: Tue, 21 Jul 2026 19:35:12 +0900 Subject: KVM: x86/mmu: Check all address spaces before skipping unsync mmu_try_to_unsync_pages() skips the shadow-page lookup when the supplied memslot allows a hugepage, because a shadow page would disallow hugepages. But hugepage metadata is per-address-space while shadow pages are shared across all address spaces. With SMM, the other address space can therefore have a shadow page even when the supplied memslot allows a hugepage. Check the corresponding memslot in the other address space before taking the fast path. Skip the shadow-page lookup only when all address spaces allow a hugepage. Fixes: b3ae3ceb5569 ("KVM: x86/mmu: KVM: x86/mmu: Skip unsync when large pages are allowed") Assisted-by: Codex:GPT-5 Signed-off-by: Jinu Kim [invert direction of the conditional. - Paolo] Message-ID: <20260721103512.2136240-3-kimjw04271234@gmail.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu/mmu.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c index 22cf222d3033..66e69d2a41b3 100644 --- a/arch/x86/kvm/mmu/mmu.c +++ b/arch/x86/kvm/mmu/mmu.c @@ -722,6 +722,26 @@ static struct kvm_lpage_info *lpage_info_slot(gfn_t gfn, return &slot->arch.lpage_info[level - 2][idx]; } +static bool kvm_gfn_is_lpage_allowed(struct kvm *kvm, + const struct kvm_memory_slot *slot, + gfn_t gfn, int level) +{ + const struct kvm_memory_slot *other_slot; + + BUILD_BUG_ON(KVM_MAX_NR_ADDRESS_SPACES > 2); + + if (lpage_info_slot(gfn, slot, level)->disallow_lpage) + return false; + + if (kvm_arch_nr_memslot_as_ids(kvm) > 1) { + other_slot = __gfn_to_memslot(__kvm_memslots(kvm, slot->as_id ^ 1), gfn); + if (other_slot && lpage_info_slot(gfn, other_slot, level)->disallow_lpage) + return false; + } + + return true; +} + /* * The most significant bit in disallow_lpage tracks whether or not memory * attributes are mixed, i.e. not identical for all gfns at the current level. @@ -2968,7 +2988,7 @@ int mmu_try_to_unsync_pages(struct kvm *kvm, const struct kvm_memory_slot *slot, * write-protected (see above), thus if the gfn can be mapped with a * hugepage and isn't write-tracked, it can't have a shadow page. */ - if (!lpage_info_slot(gfn, slot, PG_LEVEL_2M)->disallow_lpage) + if (kvm_gfn_is_lpage_allowed(kvm, slot, gfn, PG_LEVEL_2M)) return 0; /* -- cgit v1.2.3 From f495b6c4c8594122918552c9be2b51eb71647cd9 Mon Sep 17 00:00:00 2001 From: Norbert Szetei Date: Tue, 28 Jul 2026 14:50:01 +0200 Subject: ALSA: pcm: wake linked drain waiters on unlink snd_pcm_drain() on a linked stream parks an on-stack wait entry on the drained peer's runtime->sleep, and after schedule_timeout() removes it only if that peer is still found in the caller's group. If group membership changes during the wait and the sleep ends by signal or timeout (so autoremove_wake_function() does not run), finish_wait() is skipped and snd_pcm_drain() returns with the entry still queued on that stream's sleep list; a later wake_up() then walks a freed stack frame. This is reachable by unlinking either the drained or the draining stream. Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()), snd_pcm_unlink() never wakes the sleep queues. Wake every group member under the group lock before the membership change, so a linked drainer is released and drops its entry while the streams are still grouped. The window was opened when snd_pcm_link_rwsem stopped being held across the wait and the removal became conditional on group membership (see Fixes). The later switch to finish_wait() kept that conditional removal, so the signal/timeout case remained. Fixes: f57f3df03a8e ("ALSA: pcm: More fine-grained PCM link locking") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-5 Signed-off-by: Norbert Szetei Link: https://patch.msgid.link/A0705100-D10B-4286-9980-0142ABEEAD51@doyensec.com Signed-off-by: Takashi Iwai --- sound/core/pcm_native.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 7dc0060617f1..c9d0c2bb55b2 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -2367,6 +2367,7 @@ static void relink_to_local(struct snd_pcm_substream *substream) static int snd_pcm_unlink(struct snd_pcm_substream *substream) { + struct snd_pcm_substream *s; struct snd_pcm_group *group; bool nonatomic = substream->pcm->nonatomic; bool do_free = false; @@ -2379,6 +2380,12 @@ static int snd_pcm_unlink(struct snd_pcm_substream *substream) group = substream->group; snd_pcm_group_lock_irq(group, nonatomic); + /* release drain waiters before changing membership, else snd_pcm_drain() + * leaves its on-stack wait entry queued on a member's sleep list + */ + snd_pcm_group_for_each_entry(s, substream) + wake_up(&s->runtime->sleep); + relink_to_local(substream); refcount_dec(&group->refs); -- cgit v1.2.3 From cee046679655b4822f76efc9658f19efee9ac979 Mon Sep 17 00:00:00 2001 From: Robert Abrahamse Date: Tue, 28 Jul 2026 16:03:14 +0200 Subject: ALSA: usb-audio: Add quirk for Corsair Virtuoso (later revision) Add USB mixer mapping quirk for later revisions of the Corsair Virtuoso headset with USB IDs 0x1b1c:0x0a43 (wired) and 0x1b1c:0x0a44 (wireless). These devices exhibit the same mixer label collision as earlier Virtuoso variants: all controls are labelled "Headset", causing applications like PulseAudio to move the sidetone control instead of the main playback volume. Signed-off-by: Robert Abrahamse Link: https://patch.msgid.link/20260728140314.11601-1-denobyte2@gmail.com Signed-off-by: Takashi Iwai --- sound/usb/mixer_maps.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index 4d8dca04f87d..ce27fc871f51 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -638,6 +638,16 @@ static const struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x1b1c, 0x0a42), .map = corsair_virtuoso_map, }, + { + /* Corsair Virtuoso (wired mode, later revision) */ + .id = USB_ID(0x1b1c, 0x0a43), + .map = corsair_virtuoso_map, + }, + { + /* Corsair Virtuoso (wireless mode, later revision) */ + .id = USB_ID(0x1b1c, 0x0a44), + .map = corsair_virtuoso_map, + }, { /* Corsair HS80 RGB Wireless (wired mode) */ .id = USB_ID(0x1b1c, 0x0a6a), -- cgit v1.2.3 From 7678e81498e20e78d7d5f64e552cd153117c1d66 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Tue, 28 Jul 2026 11:51:59 +0800 Subject: PCI: imx6: Fix i.MX6Q/DL boot hang caused by improper PHY power sequencing commit 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators") introduced a boot hang on i.MX6Q/DL variants by reordering imx_pcie_host_init() to call imx6q_pcie_enable_ref_clk() (which powered up the PHY) before imx6q_pcie_core_reset() (which powered it back down). Before 610fa91d9863, the sequence was: 1. imx_pcie_assert_core_reset() - power down PHY (set TEST_PD), set REF_CLK_EN 2. imx_pcie_clk_enable() - power up PHY (clear TEST_PD), set REF_CLK_EN 3. Link training starts with PHY powered up (TEST_PD cleared) 4. Link training succeeds After 610fa91d9863, the sequence became: 1. imx_pcie_clk_enable() - power up PHY (clear TEST_PD), set REF_CLK_EN 2. imx_pcie_assert_core_reset() - power down PHY (set TEST_PD), set REF_CLK_EN 3. imx_pcie_deassert_core_reset() - does nothing 4. Link training starts with PHY powered down (TEST_PD set) 5. Link training fails and boot hangs when PHY register accesses hang To fix this: - Remove TEST_PD PHY power control from imx6q_pcie_enable_ref_clk() - Remove REF_CLK_EN control from imx6q_pcie_core_reset() - Add TEST_PD PHY power control to imx6qp_pcie_core_reset(), which previously relied on imx6q_pcie_enable_ref_clk() to power up the PHY by clearing TEST_PD - Clear TEST_PD to power on PHY in imx_pcie_deassert_core_reset() These changes together ensure the correct sequence: 1. REF_CLK_EN set in clk_enable() (TEST_PD untouched) 2. TEST_PD set in assert_core_reset() (PHY power off) 3. TEST_PD cleared in deassert_core_reset() (PHY power on) 4. Link training starts with proper PHY state The i.MX6Q/DL PCIe PHY requires approximately 120us between TEST_PD de-assertion and link training start. Add usleep_range(200, 500) in imx6q_pcie_core_reset() after clearing TEST_PD to satisfy this requirement. Add explicit imx_pcie_assert_core_reset() calls in error paths and host_exit() to ensure no power leak. Fixes: 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators") Reported-by: Leonardo Costa Closes: https://lore.kernel.org/lkml/20260629143439.361560-1-leoreis.costa@gmail.com/ Signed-off-by: Richard Zhu Signed-off-by: Bjorn Helgaas Tested-by: Leonardo Costa Reviewed-by: Frank Li Link: https://patch.msgid.link/20260728035159.2702021-1-hongxing.zhu@oss.nxp.com --- drivers/pci/controller/dwc/pci-imx6.c | 43 +++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index dba27eac6bff..f7389b5437df 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -680,21 +680,12 @@ static int imx_pcie_attach_pd(struct device *dev) static int imx6q_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable) { - if (enable) { - /* power up core phy and enable ref clock */ - regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD); - /* - * The async reset input need ref clock to sync internally, - * when the ref clock comes after reset, internal synced - * reset time is too short, cannot meet the requirement. - * Add a ~10us delay here. - */ - usleep_range(10, 100); - regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN); - } else { - regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN); - regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD); - } + if (enable) + regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_REF_CLK_EN); + else + regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_REF_CLK_EN); return 0; } @@ -825,8 +816,16 @@ static int imx6sx_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) static int imx6qp_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) { + if (assert) + regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD); + else + regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD); + regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_SW_RST, assert ? IMX6Q_GPR1_PCIE_SW_RST : 0); + if (!assert) usleep_range(200, 500); @@ -835,11 +834,15 @@ static int imx6qp_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) static int imx6q_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) { - if (!assert) - return 0; + if (assert) + regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD); + else + regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD); - regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD); - regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN); + if (!assert) + usleep_range(200, 500); return 0; } @@ -1445,6 +1448,7 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp) return 0; err_phy_off: + imx_pcie_assert_core_reset(imx_pcie); phy_power_off(imx_pcie->phy); err_phy_exit: phy_exit(imx_pcie->phy); @@ -1466,6 +1470,7 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp) struct dw_pcie *pci = to_dw_pcie_from_pp(pp); struct imx_pcie *imx_pcie = to_imx_pcie(pci); + imx_pcie_assert_core_reset(imx_pcie); if (imx_pcie->phy) { if (phy_power_off(imx_pcie->phy)) dev_err(pci->dev, "unable to power off PHY\n"); -- cgit v1.2.3 From 9f7007ee9858c99aa43101bc8352c672fee85644 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Wed, 17 Jun 2026 17:57:54 -0400 Subject: idpf: bound interrupt-vector register fill to the allocated array idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding its inner loop only by the per-chunk num_vectors. The array is sized separately: idpf_intr_reg_init() allocates kzalloc_objs(struct idpf_vec_regs, total_vecs) from caps.num_allocated_vectors and only checks the returned count after the fill. The sum of per-chunk num_vectors is never reconciled against total_vecs, so a reply with a small num_allocated_vectors but chunks summing higher writes past the end of reg_vals[]. Impact: a control plane (a PF or hypervisor device model) that returns a VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds num_allocated_vectors writes struct idpf_vec_regs entries past the end of the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write). Bound the fill loop to the array capacity passed in by the callers, mirroring the sibling idpf_vport_get_q_reg(). The existing num_regs < num_vecs check then rejects an undersized reply without the out-of-bounds write happening first. Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Reviewed-by: Aleksandr Loktionov Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_dev.c | 2 +- drivers/net/ethernet/intel/idpf/idpf_vf_dev.c | 2 +- drivers/net/ethernet/intel/idpf/idpf_virtchnl.c | 5 +++-- drivers/net/ethernet/intel/idpf/idpf_virtchnl.h | 2 +- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_dev.c b/drivers/net/ethernet/intel/idpf/idpf_dev.c index 1a0c71c95ef1..4079a787657f 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_dev.c +++ b/drivers/net/ethernet/intel/idpf/idpf_dev.c @@ -87,7 +87,7 @@ static int idpf_intr_reg_init(struct idpf_vport *vport, if (!reg_vals) return -ENOMEM; - num_regs = idpf_get_reg_intr_vecs(adapter, reg_vals); + num_regs = idpf_get_reg_intr_vecs(adapter, reg_vals, total_vecs); if (num_regs < num_vecs) { err = -EINVAL; goto free_reg_vals; diff --git a/drivers/net/ethernet/intel/idpf/idpf_vf_dev.c b/drivers/net/ethernet/intel/idpf/idpf_vf_dev.c index a07d7e808ca9..6726084f6cfa 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_vf_dev.c +++ b/drivers/net/ethernet/intel/idpf/idpf_vf_dev.c @@ -86,7 +86,7 @@ static int idpf_vf_intr_reg_init(struct idpf_vport *vport, if (!reg_vals) return -ENOMEM; - num_regs = idpf_get_reg_intr_vecs(adapter, reg_vals); + num_regs = idpf_get_reg_intr_vecs(adapter, reg_vals, total_vecs); if (num_regs < num_vecs) { err = -EINVAL; goto free_reg_vals; diff --git a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c index dc5ad784f456..8bd6cca64c9b 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c +++ b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c @@ -1318,11 +1318,12 @@ idpf_vport_init_queue_reg_chunks(struct idpf_vport_config *vport_config, * idpf_get_reg_intr_vecs - Get vector queue register offset * @adapter: adapter structure to get the vector chunks * @reg_vals: Register offsets to store in + * @num_vecs: number of entries the @reg_vals array can hold * * Return: number of registers that got populated */ int idpf_get_reg_intr_vecs(struct idpf_adapter *adapter, - struct idpf_vec_regs *reg_vals) + struct idpf_vec_regs *reg_vals, int num_vecs) { struct virtchnl2_vector_chunks *chunks; struct idpf_vec_regs reg_val; @@ -1346,7 +1347,7 @@ int idpf_get_reg_intr_vecs(struct idpf_adapter *adapter, dynctl_reg_spacing = le32_to_cpu(chunk->dynctl_reg_spacing); itrn_reg_spacing = le32_to_cpu(chunk->itrn_reg_spacing); - for (i = 0; i < num_vec; i++) { + for (i = 0; i < num_vec && num_regs < num_vecs; i++) { reg_vals[num_regs].dyn_ctl_reg = reg_val.dyn_ctl_reg; reg_vals[num_regs].itrn_reg = reg_val.itrn_reg; reg_vals[num_regs].itrn_index_spacing = diff --git a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.h b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.h index 6876e3ed9d1b..9b1c9c86f6ea 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.h +++ b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.h @@ -104,7 +104,7 @@ int idpf_vc_core_init(struct idpf_adapter *adapter); void idpf_vc_core_deinit(struct idpf_adapter *adapter); int idpf_get_reg_intr_vecs(struct idpf_adapter *adapter, - struct idpf_vec_regs *reg_vals); + struct idpf_vec_regs *reg_vals, int num_vecs); int idpf_queue_reg_init(struct idpf_vport *vport, struct idpf_q_vec_rsrc *rsrc, struct idpf_queue_id_reg_info *chunks); -- cgit v1.2.3 From bef152db47debcd14cbacefc5767f6f026c4bc89 Mon Sep 17 00:00:00 2001 From: Joshua Hay Date: Tue, 30 Jun 2026 16:56:19 -0700 Subject: idpf: adjust TxQ ring count minimum Set the TxQ ring count minimum to 128 descriptors. Any lower than this, and the queue will stall and trigger Tx timeouts in flow based scheduling mode. This is because next_to_clean might never be updated. In flow based scheduling mode, next_to_clean is only updated after a descriptor completion is processed, i.e. after the RE bit is set in the last descriptor of a Tx packet. This will never happen with a ring size of 64 and an IDPF_TX_SPLITQ_RE_MIN_GAP of 64. No matter what the value of last_re is initialized/set to, the calculated gap will be at most 63 and never trigger the RE bit. Even a ring size of 96 does not solve this. Because of how infrequent next_to_clean is updated and how small the ring is, IDPF_DESC_UNUSED will be much smaller on average. This increases the chance the queue will be stopped because a multi-descriptor packet, e.g. a large LSO packet, does not see enough resources on the ring. In this case, the queue will trigger the stop logic. The queue permanently stalls because there is no chance for a descriptor completion to update next_to_clean since it is dependent on a packet being sent. Fixes: 5f417d551324 ("idpf: replace flow scheduling buffer ring with buffer pool") Signed-off-by: Joshua Hay Reviewed-by: Aleksandr Loktionov Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_txrx.c | 5 +---- drivers/net/ethernet/intel/idpf/idpf_txrx.h | 2 +- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c index 7f9056404f64..c724d429a7aa 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c @@ -3097,10 +3097,7 @@ static netdev_tx_t idpf_tx_splitq_frame(struct sk_buff *skb, tx_params.dtype = IDPF_TX_DESC_DTYPE_FLEX_FLOW_SCHE; tx_params.eop_cmd = IDPF_TXD_FLEX_FLOW_CMD_EOP; - /* Set the RE bit to periodically "clean" the descriptor ring. - * MIN_GAP is set to MIN_RING size to ensure it will be set at - * least once each time around the ring. - */ + /* Set the RE bit periodically to "clean" the descriptor ring */ if (idpf_tx_splitq_need_re(tx_q)) { tx_params.eop_cmd |= IDPF_TXD_FLEX_FLOW_CMD_RE; tx_q->txq_grp->num_completions_pending++; diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.h b/drivers/net/ethernet/intel/idpf/idpf_txrx.h index 4be5b3b6d3ed..908dfa28674e 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.h +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.h @@ -21,7 +21,7 @@ /* Mailbox Queue */ #define IDPF_MAX_MBXQ 1 -#define IDPF_MIN_TXQ_DESC 64 +#define IDPF_MIN_TXQ_DESC 128 #define IDPF_MIN_RXQ_DESC 64 #define IDPF_MIN_TXQ_COMPLQ_DESC 256 #define IDPF_MAX_QIDS 256 -- cgit v1.2.3 From 9bff30482c10f70d9e56c0633a6616e07140e217 Mon Sep 17 00:00:00 2001 From: Yuho Choi Date: Fri, 3 Jul 2026 01:03:32 -0400 Subject: idpf: Fix mailbox IRQ name leak on request failure idpf_mb_intr_req_irq() allocates the mailbox IRQ name before calling request_irq(). On success, the name is released later through kfree(free_irq()), but request_irq() failure returns without freeing it. Free the allocated name on the request_irq() failure path. Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request") Signed-off-by: Yuho Choi Reviewed-by: Aleksandr Loktionov Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index cf966fe6c759..bb81e620c5c8 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -139,7 +139,7 @@ static int idpf_mb_intr_req_irq(struct idpf_adapter *adapter) if (err) { dev_err(&adapter->pdev->dev, "IRQ request for mailbox failed, error: %d\n", err); - + kfree(name); return err; } -- cgit v1.2.3 From c2816d613f388814d27bc9fd6dbd931a88056e19 Mon Sep 17 00:00:00 2001 From: Aaron Ma Date: Wed, 29 Apr 2026 11:48:49 +0800 Subject: ice: wait for reset completion in ice_resume() ice_resume() schedules an asynchronous PF reset and returns immediately. The reset runs later in ice_service_task(). If userspace tries to bring up the net device before the reset finishes, ice_open() fails with -EBUSY: ice_resume() ice_schedule_reset() # sets ICE_PFR_REQ, returns ... ice_open() ice_is_reset_in_progress() # ICE_PFR_REQ still set, -EBUSY ... ice_service_task() ice_do_reset() ice_rebuild() # clears ICE_PFR_REQ, too late Reproduced on E800 series NICs during suspend/resume with irdma enabled, where the aux device probe widens the race window. ice 0000:81:00.0: can't open net device while reset is in progress Add a best-effort wait (10s timeout, matching ice_devlink_info_get()) for the reset to complete before returning from ice_resume(). In practice the reset completes in ~300ms. Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Cc: stable@vger.kernel.org Reviewed-by: Kohei Enju Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Signed-off-by: Aaron Ma Tested-by: Alexander Nowlin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_main.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index e2fd2dab03e3..d88835482d3a 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -5637,6 +5637,16 @@ static int ice_resume(struct device *dev) /* Restart the service task */ mod_timer(&pf->serv_tmr, round_jiffies(jiffies + pf->serv_tmr_period)); + /* Best-effort wait for the scheduled reset to finish so that the + * device is operational before returning. Without this, userspace + * (e.g. NetworkManager) may try to open the net device while the + * asynchronous reset is still in progress, hitting -EBUSY. + */ + ret = ice_wait_for_reset(pf, secs_to_jiffies(10)); + if (ret) + dev_err(dev, "Wait for reset timed out (10s) during resume: %d\n", + ret); + return 0; } -- cgit v1.2.3 From fb096882095e5a8d6b5159e43793d4a38a0c5b1f Mon Sep 17 00:00:00 2001 From: Dawid Osuchowski Date: Thu, 14 May 2026 18:35:55 +0200 Subject: ice: fix VF interrupts cleanup When a virtual function sends an IRQ map command, the PF will set up interrupts according to that request. However, because these interrupts are never reset, the next time Virtual Function initializes, the interrupts are still enabled for a given VF, which leads to performance degradation in certain cases due to interrupts being unexpectedly enabled and thus causing interrupt floods. Cc: stable@vger.kernel.org Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Suggested-by: Vladimir Medvedkin Reviewed-by: Aleksandr Loktionov Signed-off-by: Dawid Osuchowski Reviewed-by: Simon Horman Tested-by: Patryk Holda Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_vf_lib.c | 27 ++++++++++++++++++++++ .../net/ethernet/intel/ice/ice_vf_lib_private.h | 1 + drivers/net/ethernet/intel/ice/virt/queues.c | 21 +++++++++++++++++ 3 files changed, 49 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice_vf_lib.c b/drivers/net/ethernet/intel/ice/ice_vf_lib.c index 9052e71e9c99..a54cb2b8d3c7 100644 --- a/drivers/net/ethernet/intel/ice/ice_vf_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_vf_lib.c @@ -848,6 +848,30 @@ static void ice_notify_vf_reset(struct ice_vf *vf) NULL); } +/** + * ice_reset_interrupts - clear all queue interrupt configuration for a VSI + * @vsi: the VSI whose interrupt registers should be cleared + * + * Zero the QINT_RQCTL and QINT_TQCTL registers for all allocated queues + * in the VSI. This clears the entire register including MSIX_INDX, ITR_INDX, + * CAUSE_ENA and NEXTQ fields, unlike ice_vf_dis_rxq_interrupt() which only + * clears the CAUSE_ENA bit. + */ +void ice_reset_interrupts(struct ice_vsi *vsi) +{ + struct ice_pf *pf = vsi->back; + struct ice_hw *hw = &pf->hw; + int i; + + ice_for_each_alloc_rxq(vsi, i) + wr32(hw, QINT_RQCTL(vsi->rxq_map[i]), 0); + + ice_for_each_alloc_txq(vsi, i) + wr32(hw, QINT_TQCTL(vsi->txq_map[i]), 0); + + ice_flush(hw); +} + /** * ice_reset_vf - Reset a particular VF * @vf: pointer to the VF structure @@ -919,6 +943,9 @@ int ice_reset_vf(struct ice_vf *vf, u32 flags) ice_dis_vf_qs(vf); + /* cleanup interrupt registers */ + ice_reset_interrupts(vsi); + /* Call Disable LAN Tx queue AQ whether or not queues are * enabled. This is needed for successful completion of VFR. */ diff --git a/drivers/net/ethernet/intel/ice/ice_vf_lib_private.h b/drivers/net/ethernet/intel/ice/ice_vf_lib_private.h index 5392b0404986..321d29c25b7c 100644 --- a/drivers/net/ethernet/intel/ice/ice_vf_lib_private.h +++ b/drivers/net/ethernet/intel/ice/ice_vf_lib_private.h @@ -26,6 +26,7 @@ void ice_initialize_vf_entry(struct ice_vf *vf); void ice_deinitialize_vf_entry(struct ice_vf *vf); void ice_dis_vf_qs(struct ice_vf *vf); +void ice_reset_interrupts(struct ice_vsi *vsi); int ice_check_vf_init(struct ice_vf *vf); enum virtchnl_status_code ice_err_to_virt_err(int err); struct ice_port_info *ice_vf_get_port_info(struct ice_vf *vf); diff --git a/drivers/net/ethernet/intel/ice/virt/queues.c b/drivers/net/ethernet/intel/ice/virt/queues.c index 31be2f76181c..431c9c546b04 100644 --- a/drivers/net/ethernet/intel/ice/virt/queues.c +++ b/drivers/net/ethernet/intel/ice/virt/queues.c @@ -224,6 +224,24 @@ void ice_vf_ena_rxq_interrupt(struct ice_vsi *vsi, u32 q_idx) wr32(hw, QINT_RQCTL(pfq), reg | QINT_RQCTL_CAUSE_ENA_M); } +/** + * ice_vf_dis_rxq_interrupt - disable Rx queue interrupt via QINT_RQCTL + * @vsi: VSI of the VF to configure + * @q_idx: VF queue index used to determine the queue in the PF's space + */ +static void ice_vf_dis_rxq_interrupt(struct ice_vsi *vsi, u32 q_idx) +{ + struct ice_hw *hw = &vsi->back->hw; + u32 pfq = vsi->rxq_map[q_idx]; + u32 reg; + + reg = rd32(hw, QINT_RQCTL(pfq)); + reg &= ~QINT_RQCTL_CAUSE_ENA_M; + wr32(hw, QINT_RQCTL(pfq), reg); + + ice_flush(hw); +} + /** * ice_vc_ena_qs_msg * @vf: pointer to the VF info @@ -416,6 +434,8 @@ int ice_vc_dis_qs_msg(struct ice_vf *vf, u8 *msg) goto error_param; } + for_each_set_bit(vf_q_id, &q_map, ICE_MAX_RSS_QS_PER_VF) + ice_vf_dis_rxq_interrupt(vsi, vf_q_id); bitmap_zero(vf->rxq_ena, ICE_MAX_RSS_QS_PER_VF); } else if (q_map) { for_each_set_bit(vf_q_id, &q_map, ICE_MAX_RSS_QS_PER_VF) { @@ -436,6 +456,7 @@ int ice_vc_dis_qs_msg(struct ice_vf *vf, u8 *msg) goto error_param; } + ice_vf_dis_rxq_interrupt(vsi, vf_q_id); /* Clear enabled queues flag */ clear_bit(vf_q_id, vf->rxq_ena); } -- cgit v1.2.3 From 3a9de5590da4ffd9e9c541c4c4d492aa2b54cf6e Mon Sep 17 00:00:00 2001 From: Dawei Feng Date: Tue, 16 Jun 2026 23:57:42 +0800 Subject: ice: fix memory leak in ice_lbtest_prepare_rings() ice_lbtest_prepare_rings() frees Rx rings only when ice_vsi_start_all_rx_rings() fails. If ice_vsi_setup_rx_rings() fails after allocating some descriptors, or if ice_vsi_cfg_lan() fails after the Rx rings were prepared, the function reaches the Tx cleanup path without releasing the initialized Rx resources. Fix this by adding separate unwind paths for Rx setup failure and LAN configuration failure. The Rx setup failure path releases the partially prepared Rx rings before freeing Tx rings, while later failures first undo the LAN Tx configuration and then release the Rx rings in reverse setup order. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an Intel E800 Series adapter available to run the ethtool offline loopback selftest, no runtime testing was able to be performed. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Cc: stable@vger.kernel.org Signed-off-by: Dawei Feng Reviewed-by: Jacob Keller Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_ethtool.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index 49371b065845..7eb380be7ed2 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -1069,18 +1069,18 @@ static int ice_lbtest_prepare_rings(struct ice_vsi *vsi) status = ice_vsi_cfg_lan(vsi); if (status) - goto err_setup_rx_ring; + goto err_cfg_lan; status = ice_vsi_start_all_rx_rings(vsi); if (status) - goto err_start_rx_ring; + goto err_cfg_lan; return 0; -err_start_rx_ring: - ice_vsi_free_rx_rings(vsi); -err_setup_rx_ring: +err_cfg_lan: ice_vsi_stop_lan_tx_rings(vsi, ICE_NO_RESET, 0); +err_setup_rx_ring: + ice_vsi_free_rx_rings(vsi); err_setup_tx_ring: ice_vsi_free_tx_rings(vsi); -- cgit v1.2.3 From b00be7c6b4bd7da3d510753b27ff6cb7ec647d07 Mon Sep 17 00:00:00 2001 From: Przemyslaw Korba Date: Wed, 20 May 2026 13:50:06 +0200 Subject: ice: suppress DPLL errors during reset recovery During reset recovery, the admin queue returns EBUSY which is expected behavior. However, the DPLL subsystem was logging these as errors and incrementing the error counter, potentially leading to unnecessary warnings and even disabling the DPLL periodic worker if the threshold was reached. Suppress error logging and error counter increments when the admin queue returns EBUSY, as this is expected during reset recovery and not a real failure condition. test case: - ethtool --reset eth3 irq-shared dma-shared filter-shared offload-shared mac-shared phy-shared ram-shared - observe if dmesg EBUSY errors are gone Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Signed-off-by: Przemyslaw Korba Reviewed-by: Simon Horman Tested-by: Rinitha S (A Contingent worker at Intel) Reviewed-by: Aleksandr Loktionov Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_dpll.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.c b/drivers/net/ethernet/intel/ice/ice_dpll.c index 30c3a4db7d61..85a74cd6ea1f 100644 --- a/drivers/net/ethernet/intel/ice/ice_dpll.c +++ b/drivers/net/ethernet/intel/ice/ice_dpll.c @@ -793,7 +793,7 @@ err: ret, libie_aq_str(pf->hw.adminq.sq_last_status), pin_type_name[pin_type], pin->idx); - else + else if (pf->hw.adminq.sq_last_status != LIBIE_AQ_RC_EBUSY) dev_err_ratelimited(ice_pf_to_dev(pf), "err:%d %s failed to update %s pin:%u\n", ret, @@ -3024,7 +3024,8 @@ static int ice_dpll_pps_update_phase_offsets(struct ice_pf *pf, *phase_offset_pins_updated = 0; ret = ice_aq_get_cgu_input_pin_measure(&pf->hw, DPLL_TYPE_PPS, meas, ARRAY_SIZE(meas)); - if (ret && pf->hw.adminq.sq_last_status == LIBIE_AQ_RC_EAGAIN) { + if (ret && (pf->hw.adminq.sq_last_status == LIBIE_AQ_RC_EAGAIN || + pf->hw.adminq.sq_last_status == LIBIE_AQ_RC_EBUSY)) { return 0; } else if (ret) { dev_err(ice_pf_to_dev(pf), @@ -3086,10 +3087,12 @@ ice_dpll_update_state(struct ice_pf *pf, struct ice_dpll *d, bool init) d->dpll_idx, d->prev_input_idx, d->input_idx, d->dpll_state, d->prev_dpll_state, d->mode); if (ret) { - dev_err(ice_pf_to_dev(pf), - "update dpll=%d state failed, ret=%d %s\n", - d->dpll_idx, ret, - libie_aq_str(pf->hw.adminq.sq_last_status)); + /* EBUSY is expected during reset recovery, don't log error */ + if (pf->hw.adminq.sq_last_status != LIBIE_AQ_RC_EBUSY) + dev_err(ice_pf_to_dev(pf), + "update dpll=%d state failed, ret=%d %s\n", + d->dpll_idx, ret, + libie_aq_str(pf->hw.adminq.sq_last_status)); return ret; } if (init) { @@ -3158,7 +3161,9 @@ static void ice_dpll_periodic_work(struct kthread_work *work) d->periodic_counter % dp->phase_offset_monitor_period == 0) ret = ice_dpll_pps_update_phase_offsets(pf, &phase_offset_ntf); if (ret) { - d->cgu_state_acq_err_num++; + /* EBUSY is expected during reset recovery */ + if (pf->hw.adminq.sq_last_status != LIBIE_AQ_RC_EBUSY) + d->cgu_state_acq_err_num++; /* stop rescheduling this worker */ if (d->cgu_state_acq_err_num > ICE_CGU_STATE_ACQ_ERR_THRESHOLD) { -- cgit v1.2.3 From 5ffab5b9589c50e4cfc0cf36ffd76c89422d4019 Mon Sep 17 00:00:00 2001 From: David Carlier Date: Sun, 12 Jul 2026 14:22:42 +0100 Subject: igc: remove napi_synchronize() in igc_down() When an AF_XDP zero-copy application is killed abruptly, the XSK pool is torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the full budget on every poll, so napi_complete_done() never clears NAPI_STATE_SCHED. igc_down() calls napi_synchronize() before napi_disable(), so it spins forever waiting for that bit and the interface never goes down. Drop the napi_synchronize() and let napi_disable() do the job -- it sets NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after polling has stopped, matching the recent igb fix b1e067240379. Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy") Suggested-by: Maciej Fijalkowski Cc: stable@vger.kernel.org Signed-off-by: David Carlier Reviewed-by: Maciej Fijalkowski Reviewed-by: Dima Ruinskiy Tested-by: Moriya Kadosh Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 2c9e2dfd8499..b3883a5a7d7a 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -5352,9 +5352,8 @@ void igc_down(struct igc_adapter *adapter) for (i = 0; i < adapter->num_q_vectors; i++) { if (adapter->q_vector[i]) { - napi_synchronize(&adapter->q_vector[i]->napi); - igc_set_queue_napi(adapter, i, NULL); napi_disable(&adapter->q_vector[i]->napi); + igc_set_queue_napi(adapter, i, NULL); } } -- cgit v1.2.3 From 0565052b7e2f436b7f1541f4849da96dc0aa7a0e Mon Sep 17 00:00:00 2001 From: Matt Vollrath Date: Thu, 16 Apr 2026 23:34:52 -0400 Subject: igbvf: Fix leak in TX DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented before each frag mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping (the head) would leak. This bug was introduced by a 2010 fix for an endless loop in dma_error. All other affected drivers have already been fixed. Fixes: c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-4-7-opus Signed-off-by: Matt Vollrath Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igbvf/netdev.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 0a3d0a1cba43..c686ee120a14 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2190,8 +2190,6 @@ dma_error: buffer_info->time_stamp = 0; buffer_info->length = 0; buffer_info->mapped_as_page = false; - if (count) - count--; /* clear timestamp and dma mappings for remaining portion of packet */ while (count--) { -- cgit v1.2.3 From 816419dfea5c88126f35eb7a1b429a1bf546665e Mon Sep 17 00:00:00 2001 From: Dawei Feng Date: Sun, 7 Jun 2026 22:57:06 +0800 Subject: e1000: fix memory leak in e1000_probe() In the e1000_probe() path, e1000_sw_init() allocates adapter->tx_ring and adapter->rx_ring. If the subsequent CE4100-specific MDIO BAR mapping fails, the error handling jumps past the ring cleanup code, leaking both allocations. Fix this leak by moving the err_mdio_ioremap label above the ring deallocation logic. This guarantees the proper release of these resources and prevents the memory leak. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc6. An x86_64 allyesconfig build showed no new warnings. As we do not have a CE4100 reference platform to test with, no runtime testing was able to be performed. Fixes: 5377a4160bb65 ("e1000: Add support for the CE4100 reference platform") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Reviewed-by: Dima Ruinskiy Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 9b09eb144b81..d7f5c6f16142 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1222,11 +1222,11 @@ err_eeprom: if (hw->flash_address) iounmap(hw->flash_address); +err_mdio_ioremap: kfree(adapter->tx_ring); kfree(adapter->rx_ring); err_dma: err_sw_init: -err_mdio_ioremap: iounmap(hw->ce4100_gbe_mdio_base_virt); iounmap(hw->hw_addr); err_ioremap: -- cgit v1.2.3 From d57e506f6a1e3929611340fae87c1e4823f4d85c Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Mon, 20 Jul 2026 17:53:33 +0300 Subject: Bluetooth: ISO: clear iso_data always when detaching conn from hcon When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is necessary, otherwise later iso_conn_free() will UAF. Fix clearing of iso_data in iso_sock_disconn() Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on iso_sock_release() followed by hci_abort_conn_sync(). Fixes: fbdc4bc47268 ("Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 2e95a153912c..babba61eb335 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -837,6 +837,7 @@ static void iso_sock_disconn(struct sock *sk) sk->sk_state = BT_DISCONN; iso_conn_lock(iso_pi(sk)->conn); hci_conn_drop(iso_pi(sk)->conn->hcon); + iso_pi(sk)->conn->hcon->iso_data = NULL; iso_pi(sk)->conn->hcon = NULL; iso_conn_unlock(iso_pi(sk)->conn); } -- cgit v1.2.3 From d0a7b48ad0921bd88effaee10bf970ab1d5d0ddd Mon Sep 17 00:00:00 2001 From: Zihan Xi Date: Tue, 21 Jul 2026 22:36:07 +0800 Subject: Bluetooth: mgmt: fix UAF in pair command cancellation The pairing completion and authentication failure callbacks look up the pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The lookup returned a command that was still linked on the shared pending list, without keeping mgmt_pending_lock held for the later dereference and removal. A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the same pending command before the callback uses it. The reverse race is also possible when cancel_pair_device() gets a command from pending_find() and a callback removes it before the cancel path dereferences it. This can lead to a use-after-free and a second list_del(). Make the pairing lookup helpers transfer ownership of the pending command by removing it from hdev->mgmt_pending while holding mgmt_pending_lock. The callbacks and cancel path then complete the command and free it directly, so racing paths cannot find or free the same command again. Take a temporary hci_conn reference in cancel_pair_device() because the command completion drops the reference stored in the pending command. Fixes: e9a416b5ce0c ("Bluetooth: Add mgmt_pair_device command") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: Codex:gpt-5.4 Signed-off-by: Zihan Xi Reviewed-by: Ren Wei Reported-by: Vega Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/mgmt.c | 64 +++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 46 insertions(+), 18 deletions(-) diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 1db10e0f617f..4fd37ac79986 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -3514,11 +3514,13 @@ static int set_io_capability(struct sock *sk, struct hci_dev *hdev, void *data, NULL, 0); } -static struct mgmt_pending_cmd *find_pairing(struct hci_conn *conn) +static struct mgmt_pending_cmd *remove_pairing(struct hci_conn *conn) { struct hci_dev *hdev = conn->hdev; struct mgmt_pending_cmd *cmd; + mutex_lock(&hdev->mgmt_pending_lock); + list_for_each_entry(cmd, &hdev->mgmt_pending, list) { if (cmd->opcode != MGMT_OP_PAIR_DEVICE) continue; @@ -3526,9 +3528,39 @@ static struct mgmt_pending_cmd *find_pairing(struct hci_conn *conn) if (cmd->user_data != conn) continue; + list_del(&cmd->list); + mutex_unlock(&hdev->mgmt_pending_lock); return cmd; } + mutex_unlock(&hdev->mgmt_pending_lock); + + return NULL; +} + +static struct mgmt_pending_cmd *remove_pairing_by_addr(struct hci_dev *hdev, + bdaddr_t *bdaddr) +{ + struct mgmt_pending_cmd *cmd; + struct hci_conn *conn; + + mutex_lock(&hdev->mgmt_pending_lock); + + list_for_each_entry(cmd, &hdev->mgmt_pending, list) { + if (cmd->opcode != MGMT_OP_PAIR_DEVICE) + continue; + + conn = cmd->user_data; + if (bacmp(bdaddr, &conn->dst) != 0) + continue; + + list_del(&cmd->list); + mutex_unlock(&hdev->mgmt_pending_lock); + return cmd; + } + + mutex_unlock(&hdev->mgmt_pending_lock); + return NULL; } @@ -3566,10 +3598,10 @@ void mgmt_smp_complete(struct hci_conn *conn, bool complete) u8 status = complete ? MGMT_STATUS_SUCCESS : MGMT_STATUS_FAILED; struct mgmt_pending_cmd *cmd; - cmd = find_pairing(conn); + cmd = remove_pairing(conn); if (cmd) { cmd->cmd_complete(cmd, status); - mgmt_pending_remove(cmd); + mgmt_pending_free(cmd); } } @@ -3579,14 +3611,14 @@ static void pairing_complete_cb(struct hci_conn *conn, u8 status) BT_DBG("status %u", status); - cmd = find_pairing(conn); + cmd = remove_pairing(conn); if (!cmd) { BT_DBG("Unable to find a pending command"); return; } cmd->cmd_complete(cmd, mgmt_status(status)); - mgmt_pending_remove(cmd); + mgmt_pending_free(cmd); } static void le_pairing_complete_cb(struct hci_conn *conn, u8 status) @@ -3598,14 +3630,14 @@ static void le_pairing_complete_cb(struct hci_conn *conn, u8 status) if (!status) return; - cmd = find_pairing(conn); + cmd = remove_pairing(conn); if (!cmd) { BT_DBG("Unable to find a pending command"); return; } cmd->cmd_complete(cmd, mgmt_status(status)); - mgmt_pending_remove(cmd); + mgmt_pending_free(cmd); } static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data, @@ -3762,23 +3794,17 @@ static int cancel_pair_device(struct sock *sk, struct hci_dev *hdev, void *data, goto unlock; } - cmd = pending_find(MGMT_OP_PAIR_DEVICE, hdev); + cmd = remove_pairing_by_addr(hdev, &addr->bdaddr); if (!cmd) { err = mgmt_cmd_status(sk, hdev->id, MGMT_OP_CANCEL_PAIR_DEVICE, MGMT_STATUS_INVALID_PARAMS); goto unlock; } - conn = cmd->user_data; - - if (bacmp(&addr->bdaddr, &conn->dst) != 0) { - err = mgmt_cmd_status(sk, hdev->id, MGMT_OP_CANCEL_PAIR_DEVICE, - MGMT_STATUS_INVALID_PARAMS); - goto unlock; - } + conn = hci_conn_get(cmd->user_data); cmd->cmd_complete(cmd, MGMT_STATUS_CANCELLED); - mgmt_pending_remove(cmd); + mgmt_pending_free(cmd); err = mgmt_cmd_complete(sk, hdev->id, MGMT_OP_CANCEL_PAIR_DEVICE, 0, addr, sizeof(*addr)); @@ -3796,6 +3822,8 @@ static int cancel_pair_device(struct sock *sk, struct hci_dev *hdev, void *data, if (conn->conn_reason == CONN_REASON_PAIR_DEVICE) hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM); + hci_conn_put(conn); + unlock: hci_dev_unlock(hdev); return err; @@ -10137,14 +10165,14 @@ void mgmt_auth_failed(struct hci_conn *conn, u8 hci_status) ev.addr.type = link_to_bdaddr(conn->type, conn->dst_type); ev.status = status; - cmd = find_pairing(conn); + cmd = remove_pairing(conn); mgmt_event(MGMT_EV_AUTH_FAILED, conn->hdev, &ev, sizeof(ev), cmd ? cmd->sk : NULL); if (cmd) { cmd->cmd_complete(cmd, status); - mgmt_pending_remove(cmd); + mgmt_pending_free(cmd); } } -- cgit v1.2.3 From 8f2f62855a41d1730fb9e8122912bd2c8d6bed5d Mon Sep 17 00:00:00 2001 From: Zihan Xi Date: Fri, 24 Jul 2026 00:43:46 +0800 Subject: Bluetooth: mgmt: fix pending command UAF in EIR updates MGMT_OP_SET_LOCAL_NAME is handled asynchronously on powered controllers and can run set_name_sync(). When the controller is BR/EDR capable, set_name_sync() updates the local name and then rebuilds EIR data through eir_create(). The EIR builder walks hdev->uuids, but the UUID list can be changed and entries can be freed by MGMT_OP_ADD_UUID and MGMT_OP_REMOVE_UUID. pending_eir_or_class() is meant to serialize management commands that can change EIR or the class of device, but it did not include MGMT_OP_SET_LOCAL_NAME. In addition, it walked hdev->mgmt_pending without hdev->mgmt_pending_lock even though pending commands are added and removed under that mutex. A racing command completion can therefore remove and free a pending command while pending_eir_or_class() is still inspecting it, leading to a use-after-free in the pending-command list or allowing a local name update to rebuild EIR while UUID entries are being removed. Take hdev->mgmt_pending_lock while scanning hdev->mgmt_pending and treat MGMT_OP_SET_LOCAL_NAME as an EIR/class-affecting pending command on the powered asynchronous path. Check for a conflicting pending command before copying the new short name so a rejected SET_LOCAL_NAME request does not modify hdev->short_name. Fixes: 6fe26f694c82 ("Bluetooth: MGMT: Protect mgmt_pending list with its own lock") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: Codex:gpt-5.4 Signed-off-by: Zihan Xi Signed-off-by: Ren Wei Reported-by: Vega Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/mgmt.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 4fd37ac79986..167d75e34526 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2696,18 +2696,28 @@ static int mgmt_hci_cmd_sync(struct sock *sk, struct hci_dev *hdev, static bool pending_eir_or_class(struct hci_dev *hdev) { struct mgmt_pending_cmd *cmd; + bool pending = false; + + mutex_lock(&hdev->mgmt_pending_lock); list_for_each_entry(cmd, &hdev->mgmt_pending, list) { switch (cmd->opcode) { case MGMT_OP_ADD_UUID: case MGMT_OP_REMOVE_UUID: case MGMT_OP_SET_DEV_CLASS: + case MGMT_OP_SET_LOCAL_NAME: case MGMT_OP_SET_POWERED: - return true; + pending = true; + break; } + + if (pending) + break; } - return false; + mutex_unlock(&hdev->mgmt_pending_lock); + + return pending; } static const u8 bluetooth_base_uuid[] = { @@ -4071,6 +4081,12 @@ static int set_local_name(struct sock *sk, struct hci_dev *hdev, void *data, goto failed; } + if (hdev_is_powered(hdev) && pending_eir_or_class(hdev)) { + err = mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_LOCAL_NAME, + MGMT_STATUS_BUSY); + goto failed; + } + memcpy(hdev->short_name, cp->short_name, sizeof(hdev->short_name)); if (!hdev_is_powered(hdev)) { -- cgit v1.2.3 From 47778d2c2087b5d192398f6fddf692d16a5431cf Mon Sep 17 00:00:00 2001 From: Sangho Lee Date: Thu, 23 Jul 2026 12:28:06 +0900 Subject: Bluetooth: HIDP: reject frames without a transaction header hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0] before checking that the L2CAP SDU contains a transaction header. A connected HIDP peer can send an empty basic-mode SDU and make both paths use an uninitialized byte from skb tailroom. KMSAN reports the use in hidp_session_run(), with the uninitialized value originating in __alloc_skb() through vhci_write(). The control path produces two reports and the interrupt path produces one. The byte can also be controlled by a malformed lower-layer packet. If an HCI ACL packet contains an L2CAP PDU with a declared zero-length payload followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to the declared PDU length before dispatch. The current HIDP path nevertheless consumes the extra byte as HIDP_TRANS_HID_CONTROL | HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this change, the same packet is discarded and a subsequent feature report request succeeds. Pull the transaction header with skb_pull_data() and discard frames that do not contain it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Sangho Lee Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hidp/core.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 0e24c5e2955e..194208d03d18 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -560,16 +560,18 @@ static int hidp_process_data(struct hidp_session *session, struct sk_buff *skb, static void hidp_recv_ctrl_frame(struct hidp_session *session, struct sk_buff *skb) { - unsigned char hdr, type, param; + unsigned char type, param; + u8 *hdr; int free_skb = 1; BT_DBG("session %p skb %p len %u", session, skb, skb->len); - hdr = skb->data[0]; - skb_pull(skb, 1); + hdr = skb_pull_data(skb, 1); + if (!hdr) + goto free; - type = hdr & HIDP_HEADER_TRANS_MASK; - param = hdr & HIDP_HEADER_PARAM_MASK; + type = *hdr & HIDP_HEADER_TRANS_MASK; + param = *hdr & HIDP_HEADER_PARAM_MASK; switch (type) { case HIDP_TRANS_HANDSHAKE: @@ -590,6 +592,7 @@ static void hidp_recv_ctrl_frame(struct hidp_session *session, break; } +free: if (free_skb) kfree_skb(skb); } @@ -597,14 +600,15 @@ static void hidp_recv_ctrl_frame(struct hidp_session *session, static void hidp_recv_intr_frame(struct hidp_session *session, struct sk_buff *skb) { - unsigned char hdr; + u8 *hdr; BT_DBG("session %p skb %p len %u", session, skb, skb->len); - hdr = skb->data[0]; - skb_pull(skb, 1); + hdr = skb_pull_data(skb, 1); + if (!hdr) + goto free; - if (hdr == (HIDP_TRANS_DATA | HIDP_DATA_RTYPE_INPUT)) { + if (*hdr == (HIDP_TRANS_DATA | HIDP_DATA_RTYPE_INPUT)) { hidp_set_timer(session); if (session->input) @@ -616,9 +620,10 @@ static void hidp_recv_intr_frame(struct hidp_session *session, BT_DBG("report len %d", skb->len); } } else { - BT_DBG("Unsupported protocol header 0x%02x", hdr); + BT_DBG("Unsupported protocol header 0x%02x", *hdr); } +free: kfree_skb(skb); } -- cgit v1.2.3 From 34f53d27b81a16a02828c8fdfa4e02badc326f17 Mon Sep 17 00:00:00 2001 From: Sangho Lee Date: Thu, 23 Jul 2026 12:28:07 +0900 Subject: Bluetooth: HIDP: validate numbered report payloads When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. Fixes: 0ff1731a1ae5 ("HID: bt: Add support for hidraw HIDIOCGFEATURE and HIDIOCSFEATURE") Cc: stable@vger.kernel.org Signed-off-by: Sangho Lee Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hidp/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 194208d03d18..f5bdf9f1ca63 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -543,9 +543,10 @@ static int hidp_process_data(struct hidp_session *session, struct sk_buff *skb, } if (test_bit(HIDP_WAITING_FOR_RETURN, &session->flags) && - param == session->waiting_report_type) { + param == session->waiting_report_type) { if (session->waiting_report_number < 0 || - session->waiting_report_number == skb->data[0]) { + (skb->len && + session->waiting_report_number == skb->data[0])) { /* hidp_get_raw_report() is waiting on this report. */ session->report_return = skb; done_with_skb = 0; -- cgit v1.2.3 From c4740e7f23ff9a8210198d8b4703259e21b9f69d Mon Sep 17 00:00:00 2001 From: Jiale Yao Date: Thu, 23 Jul 2026 14:48:45 +0800 Subject: Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp l2cap_le_connect_rsp() obtains a channel via __l2cap_get_chan_by_ident() but neither holds a reference nor uses l2cap_chan_hold_unless_zero() before locking and operating on it. A concurrent l2cap_chan_del() triggered by a remote disconnect can free the channel between the lookup and l2cap_chan_lock(), causing a use-after-free. The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero() to safely hold a reference, but l2cap_le_connect_rsp() was left unprotected. Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup and l2cap_chan_put() on the exit path, consistent with other L2CAP response handlers. Fixes: f1496dee9cbd ("Bluetooth: Add initial code for LE L2CAP Connect Request") Assisted-by: Claude:deepseek-v4-pro Signed-off-by: Jiale Yao Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/l2cap_core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 538ae9aa3479..1156aba4e83c 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4820,6 +4820,10 @@ static int l2cap_le_connect_rsp(struct l2cap_conn *conn, if (!chan) return -EBADSLT; + chan = l2cap_chan_hold_unless_zero(chan); + if (!chan) + return -EBADSLT; + err = 0; l2cap_chan_lock(chan); @@ -4865,6 +4869,7 @@ static int l2cap_le_connect_rsp(struct l2cap_conn *conn, } l2cap_chan_unlock(chan); + l2cap_chan_put(chan); return err; } -- cgit v1.2.3 From b230e5bf501c5edaf2eb0991cb862ac142031d4b Mon Sep 17 00:00:00 2001 From: Jiale Yao Date: Wed, 22 Jul 2026 17:26:14 +0800 Subject: Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame rfcomm_recv_frame() casts skb->data to struct rfcomm_hdr and dereferences hdr->addr and hdr->ctrl without validating skb->len first. A truncated frame with skb->len less than the minimum header size causes an out-of-bounds read of uninitialized memory. Additionally, a zero-length frame causes skb->len-- to underflow to UINT_MAX, making skb_tail_pointer() read far past the buffer. Commit 23882b828c3c ("Bluetooth: RFCOMM: validate skb length in MCC handlers") fixed the same class of missing-length-check bugs in the MCC sub-handlers, but the top-level rfcomm_recv_frame() was left unfixed. KMSAN reports: BUG: KMSAN: uninit-value in rfcomm_run ... Uninit was created at: __alloc_skb+0x474/0xb60 vhci_write+0xe9/0x870 Fix this by rejecting frames smaller than sizeof(struct rfcomm_hdr) + 1 (the minimum frame must have a 3-byte header and a 1-byte FCS). Signed-off-by: Jiale Yao Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/rfcomm/core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 75f7512dec54..2e8c080b4d9e 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1795,6 +1795,11 @@ static struct rfcomm_session *rfcomm_recv_frame(struct rfcomm_session *s, return s; } + if (skb->len < sizeof(*hdr) + 1) { + kfree_skb(skb); + return s; + } + dlci = __get_dlci(hdr->addr); type = __get_type(hdr->ctrl); -- cgit v1.2.3 From cdc36db204ffd97b947d64374cf23a210dc74777 Mon Sep 17 00:00:00 2001 From: Chengfeng Ye Date: Thu, 23 Jul 2026 23:34:40 +0800 Subject: Bluetooth: hci_sync: Fix advertising data UAFs hci_find_adv_instance() returns an adv_info pointer that is valid only while hdev->lock is held. The advertising command-sync paths perform instance lookups without that lock and, in some cases, retain the pointer while waiting for a controller response. An advertising termination event can therefore interleave as follows: hci_cmd_sync_work hci_rx_work hci_find_adv_instance() __hci_cmd_sync_status() wait for controller reply hci_dev_lock() hci_remove_adv_instance() kfree(adv) adv->scan_rsp_changed = false KASAN reported: BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300 Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_set_ext_scan_rsp_data_sync+0x2e1/0x300 hci_schedule_adv_instance_sync+0x390/0x4c0 hci_cmd_sync_work+0x173/0x300 Allocated by task 87: hci_add_adv_instance+0x538/0xac0 add_advertising+0x885/0x1160 Freed by task 89: kfree+0x131/0x3c0 hci_remove_adv_instance+0x1d8/0x3b0 hci_le_ext_adv_term_evt+0x17b/0x730 Protect the instance lookup and payload construction in the extended advertising, scan response, and periodic advertising data paths. Snapshot the advertising parameters under hdev->lock, but release the lock before waiting for the controller. Clear advertising-data dirty bits before issuing their commands and restore them after a failure using a fresh lookup. Likewise, update the reported transmit power through a fresh lookup after the parameter command completes. No adv_info pointer then survives an HCI command wait. Fixes: cba6b758711c ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2") Cc: stable@vger.kernel.org Suggested-by: Luiz Augusto von Dentz Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_sync.c | 131 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 97 insertions(+), 34 deletions(-) diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index c0b1fc293b49..aa3d53818812 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -1233,10 +1233,11 @@ static int hci_set_adv_set_random_addr_sync(struct hci_dev *hdev, u8 instance, } static int -hci_set_ext_adv_params_sync(struct hci_dev *hdev, struct adv_info *adv, +hci_set_ext_adv_params_sync(struct hci_dev *hdev, u8 instance, const struct hci_cp_le_set_ext_adv_params *cp, struct hci_rp_le_set_ext_adv_params *rp) { + struct adv_info *adv; struct sk_buff *skb; skb = __hci_cmd_sync(hdev, HCI_OP_LE_SET_EXT_ADV_PARAMS, sizeof(*cp), @@ -1264,11 +1265,15 @@ hci_set_ext_adv_params_sync(struct hci_dev *hdev, struct adv_info *adv, if (!rp->status) { hdev->adv_addr_type = cp->own_addr_type; - if (!cp->handle) { + if (!instance) { /* Store in hdev for instance 0 */ hdev->adv_tx_power = rp->tx_power; - } else if (adv) { - adv->tx_power = rp->tx_power; + } else { + hci_dev_lock(hdev); + adv = hci_find_adv_instance(hdev, instance); + if (adv) + adv->tx_power = rp->tx_power; + hci_dev_unlock(hdev); } } @@ -1284,9 +1289,13 @@ static int hci_set_ext_adv_data_sync(struct hci_dev *hdev, u8 instance) int err; if (instance) { + hci_dev_lock(hdev); + adv = hci_find_adv_instance(hdev, instance); - if (!adv || !adv->adv_data_changed) + if (!adv || !adv->adv_data_changed) { + hci_dev_unlock(hdev); return 0; + } } len = eir_create_adv_data(hdev, instance, pdu->data, @@ -1297,16 +1306,27 @@ static int hci_set_ext_adv_data_sync(struct hci_dev *hdev, u8 instance) pdu->operation = LE_SET_ADV_DATA_OP_COMPLETE; pdu->frag_pref = LE_SET_ADV_DATA_NO_FRAG; + if (adv) { + adv->adv_data_changed = false; + hci_dev_unlock(hdev); + } + err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_DATA, struct_size(pdu, data, len), pdu, HCI_CMD_TIMEOUT); - if (err) + if (err) { + if (instance) { + hci_dev_lock(hdev); + adv = hci_find_adv_instance(hdev, instance); + if (adv) + adv->adv_data_changed = true; + hci_dev_unlock(hdev); + } + return err; + } - /* Update data if the command succeed */ - if (adv) { - adv->adv_data_changed = false; - } else { + if (!instance) { memcpy(hdev->adv_data, pdu->data, len); hdev->adv_data_len = len; } @@ -1360,22 +1380,22 @@ int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) struct adv_info *adv; bool secondary_adv; - if (instance > 0) { - adv = hci_find_adv_instance(hdev, instance); - if (!adv) - return -EINVAL; - } else { - adv = NULL; - } - /* Updating parameters of an active instance will return a - * Command Disallowed error, so we must first disable the - * instance if it is active. + * Command Disallowed error, so disable it before taking a snapshot. */ - if (adv) { + if (instance > 0) { err = hci_disable_ext_adv_instance_sync(hdev, instance); if (err) return err; + + hci_dev_lock(hdev); + adv = hci_find_adv_instance(hdev, instance); + if (!adv) { + hci_dev_unlock(hdev); + return -EINVAL; + } + } else { + adv = NULL; } flags = hci_adv_instance_flags(hdev, instance); @@ -1386,8 +1406,11 @@ int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) connectable = (flags & MGMT_ADV_FLAG_CONNECTABLE) || mgmt_get_connectable(hdev); - if (!is_advertising_allowed(hdev, connectable)) + if (!is_advertising_allowed(hdev, connectable)) { + if (instance) + hci_dev_unlock(hdev); return -EPERM; + } /* Set require_privacy to true only when non-connectable * advertising is used and it is not periodic. @@ -1398,8 +1421,11 @@ int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) err = hci_get_random_address(hdev, require_privacy, adv_use_rpa(hdev, flags), adv, &own_addr_type, &random_addr); - if (err < 0) + if (err < 0) { + if (instance) + hci_dev_unlock(hdev); return err; + } memset(&cp, 0, sizeof(cp)); @@ -1450,6 +1476,9 @@ int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) cp.channel_map = hdev->le_adv_channel_map; cp.handle = adv ? adv->handle : instance; + if (instance) + hci_dev_unlock(hdev); + if (flags & MGMT_ADV_FLAG_SEC_2M) { cp.primary_phy = HCI_ADV_PHY_1M; cp.secondary_phy = HCI_ADV_PHY_2M; @@ -1462,12 +1491,12 @@ int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) cp.secondary_phy = HCI_ADV_PHY_1M; } - err = hci_set_ext_adv_params_sync(hdev, adv, &cp, &rp); + err = hci_set_ext_adv_params_sync(hdev, instance, &cp, &rp); if (err) return err; /* Update adv data as tx power is known now */ - err = hci_set_ext_adv_data_sync(hdev, cp.handle); + err = hci_set_ext_adv_data_sync(hdev, instance); if (err) return err; @@ -1475,9 +1504,14 @@ int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) own_addr_type == ADDR_LE_DEV_RANDOM_RESOLVED) && bacmp(&random_addr, BDADDR_ANY)) { /* Check if random address need to be updated */ - if (adv) { - if (!bacmp(&random_addr, &adv->random_addr)) + if (instance) { + hci_dev_lock(hdev); + adv = hci_find_adv_instance(hdev, instance); + if (!adv || !bacmp(&random_addr, &adv->random_addr)) { + hci_dev_unlock(hdev); return 0; + } + hci_dev_unlock(hdev); } else { if (!bacmp(&random_addr, &hdev->random_addr)) return 0; @@ -1499,9 +1533,13 @@ static int hci_set_ext_scan_rsp_data_sync(struct hci_dev *hdev, u8 instance) int err; if (instance) { + hci_dev_lock(hdev); + adv = hci_find_adv_instance(hdev, instance); - if (!adv || !adv->scan_rsp_changed) + if (!adv || !adv->scan_rsp_changed) { + hci_dev_unlock(hdev); return 0; + } } len = eir_create_scan_rsp(hdev, instance, pdu->data); @@ -1511,15 +1549,27 @@ static int hci_set_ext_scan_rsp_data_sync(struct hci_dev *hdev, u8 instance) pdu->operation = LE_SET_ADV_DATA_OP_COMPLETE; pdu->frag_pref = LE_SET_ADV_DATA_NO_FRAG; + if (adv) { + adv->scan_rsp_changed = false; + hci_dev_unlock(hdev); + } + err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_SCAN_RSP_DATA, struct_size(pdu, data, len), pdu, HCI_CMD_TIMEOUT); - if (err) + if (err) { + if (instance) { + hci_dev_lock(hdev); + adv = hci_find_adv_instance(hdev, instance); + if (adv) + adv->scan_rsp_changed = true; + hci_dev_unlock(hdev); + } + return err; + } - if (adv) { - adv->scan_rsp_changed = false; - } else { + if (!instance) { memcpy(hdev->scan_rsp_data, pdu->data, len); hdev->scan_rsp_data_len = len; } @@ -1534,8 +1584,14 @@ static int __hci_set_scan_rsp_data_sync(struct hci_dev *hdev, u8 instance) memset(&cp, 0, sizeof(cp)); + if (instance) + hci_dev_lock(hdev); + len = eir_create_scan_rsp(hdev, instance, cp.data); + if (instance) + hci_dev_unlock(hdev); + if (hdev->scan_rsp_data_len == len && !memcmp(cp.data, hdev->scan_rsp_data, len)) return 0; @@ -1670,9 +1726,13 @@ static int hci_set_per_adv_data_sync(struct hci_dev *hdev, u8 instance) struct adv_info *adv = NULL; if (instance) { + hci_dev_lock(hdev); + adv = hci_find_adv_instance(hdev, instance); - if (!adv || !adv->periodic) + if (!adv || !adv->periodic) { + hci_dev_unlock(hdev); return 0; + } } len = eir_create_per_adv_data(hdev, instance, pdu->data); @@ -1681,6 +1741,9 @@ static int hci_set_per_adv_data_sync(struct hci_dev *hdev, u8 instance) pdu->handle = adv ? adv->handle : instance; pdu->operation = LE_SET_ADV_DATA_OP_COMPLETE; + if (adv) + hci_dev_unlock(hdev); + return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PER_ADV_DATA, struct_size(pdu, data, len), pdu, HCI_CMD_TIMEOUT); @@ -6523,7 +6586,7 @@ static int hci_le_ext_directed_advertising_sync(struct hci_dev *hdev, if (err) return err; - err = hci_set_ext_adv_params_sync(hdev, NULL, &cp, &rp); + err = hci_set_ext_adv_params_sync(hdev, 0, &cp, &rp); if (err) return err; -- cgit v1.2.3 From 0786469ee242952008628ed0e2d386098e2065ab Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:24 +0300 Subject: Bluetooth: ISO: fix CONNECTED -> CLOSED transition on shutdown/release Commit d57e506f6a1e ("Bluetooth: ISO: clear iso_data always when detaching conn from hcon") merged a version of the UAF fix that breaks releasing connected ISO sockets. Since hci_conn::iso_data is set to NULL, iso_chan_del() won't be called when the hci_conn disconnects, and the ISO socket does not emit POLLHUP correctly. Fix by retaining full hci_conn <-> iso_conn association while in BT_DISCONNECT state, so that local disconnect via shutdown() follows similar ISO socket code path as remote disconnect. Use a separate flag to track whether hci_conn_drop() is needed, instead of setting iso_conn::hcon = NULL In iso_sock_ready(), disallow disconnecting socket going BT_CONNECTED, in case hcon connects while its drop is pending. Fixes: d57e506f6a1e ("Bluetooth: ISO: clear iso_data always when detaching conn from hcon") Fixes: fbdc4bc47268 ("Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index babba61eb335..299a9336b5e1 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -24,8 +24,14 @@ static struct bt_sock_list iso_sk_list = { }; /* ---- ISO connections ---- */ +enum { + ISO_CONN_DROPPED, + __ISO_CONN_NUM_FLAGS +}; + struct iso_conn { struct hci_conn *hcon; + DECLARE_BITMAP(flags, __ISO_CONN_NUM_FLAGS); /* @lock: spinlock protecting changes to iso_conn fields */ spinlock_t lock; @@ -107,7 +113,8 @@ static void iso_conn_free(struct kref *ref) if (conn->hcon) { conn->hcon->iso_data = NULL; - hci_conn_drop(conn->hcon); + if (!test_and_set_bit(ISO_CONN_DROPPED, conn->flags)) + hci_conn_drop(conn->hcon); } /* Ensure no more work items will run since hci_conn has been dropped */ @@ -306,6 +313,7 @@ static int __iso_chan_add(struct iso_conn *conn, struct sock *sk, iso_pi(sk)->conn = conn; conn->sk = sk; + clear_bit(ISO_CONN_DROPPED, conn->flags); if (parent) bt_accept_enqueue(parent, sk, true); @@ -835,11 +843,8 @@ static void iso_sock_disconn(struct sock *sk) } sk->sk_state = BT_DISCONN; - iso_conn_lock(iso_pi(sk)->conn); - hci_conn_drop(iso_pi(sk)->conn->hcon); - iso_pi(sk)->conn->hcon->iso_data = NULL; - iso_pi(sk)->conn->hcon = NULL; - iso_conn_unlock(iso_pi(sk)->conn); + if (!test_and_set_bit(ISO_CONN_DROPPED, iso_pi(sk)->conn->flags)) + hci_conn_drop(iso_pi(sk)->conn->hcon); } static void __iso_sock_close(struct sock *sk) @@ -2042,9 +2047,18 @@ static void iso_sock_ready(struct sock *sk) return; lock_sock(sk); + + switch (sk->sk_state) { + case BT_DISCONN: + case BT_CLOSED: + release_sock(sk); + return; + } + iso_sock_clear_timer(sk); sk->sk_state = BT_CONNECTED; sk->sk_state_change(sk); + release_sock(sk); } -- cgit v1.2.3 From 89cf154d7c18e6e94a3da83051f3cf2bac317ae2 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:25 +0300 Subject: Bluetooth: ISO: lock sk in iso_sock_getname Accessing iso_pi(sk)->conn requires lock_sock, which is not held here. Fix by adding the lock/release. Fixes: 2df108c227b2 ("Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 299a9336b5e1..dbb8f43052f0 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -1472,6 +1472,8 @@ static int iso_sock_getname(struct socket *sock, struct sockaddr *addr, BT_DBG("sock %p, sk %p", sock, sk); + lock_sock(sk); + addr->sa_family = AF_BLUETOOTH; if (peer) { @@ -1493,6 +1495,8 @@ static int iso_sock_getname(struct socket *sock, struct sockaddr *addr, sa->iso_bdaddr_type = iso_pi(sk)->src_type; } + release_sock(sk); + return len; } -- cgit v1.2.3 From 4311fd6f429065a8ba208660360a895627a00cf3 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:26 +0300 Subject: Bluetooth: ISO: lock sk in iso_connect_ind Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the "ev3" part of iso_connect_ind. It may also be NULL if socket has transitioned away from the LISTEN/CONNECT states before locking. Fix by adding lock/release. Recheck hcon is valid after lock acquire where needed. Fixes: 168d9bf9c7f0 ("Bluetooth: ISO: Reassemble PA data for bcast sink") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index dbb8f43052f0..651661833966 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -2369,7 +2369,7 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) lock_sock(sk); - hcon = iso_pi(sk)->conn->hcon; + hcon = iso_pi(sk)->conn ? iso_pi(sk)->conn->hcon : NULL; iso_pi(sk)->qos.bcast.encryption = ev2->encryption; if (ev2->num_bis < iso_pi(sk)->bc_num_bis) @@ -2409,9 +2409,11 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) if (!sk) goto done; - hcon = iso_pi(sk)->conn->hcon; + lock_sock(sk); + + hcon = iso_pi(sk)->conn ? iso_pi(sk)->conn->hcon : NULL; if (!hcon) - goto done; + goto release3; if (ev3->data_status == LE_PA_DATA_TRUNCATED) { /* The controller was unable to retrieve PA data. */ @@ -2419,12 +2421,12 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) HCI_MAX_PER_AD_TOT_LEN); hcon->le_per_adv_data_len = 0; hcon->le_per_adv_data_offset = 0; - goto done; + goto release3; } if (hcon->le_per_adv_data_offset + ev3->length > HCI_MAX_PER_AD_TOT_LEN) - goto done; + goto release3; memcpy(hcon->le_per_adv_data + hcon->le_per_adv_data_offset, ev3->data, ev3->length); @@ -2443,18 +2445,19 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) &base_len); if (!base || base_len > BASE_MAX_LENGTH) - goto done; + goto release3; - lock_sock(sk); memcpy(iso_pi(sk)->base, base, base_len); iso_pi(sk)->base_len = base_len; - release_sock(sk); } else { /* This is a PA data fragment. Keep pa_data_len set to 0 * until all data has been reassembled. */ hcon->le_per_adv_data_len = 0; } + +release3: + release_sock(sk); } else { sk = iso_get_sock(hdev, &hdev->bdaddr, BDADDR_ANY, BT_LISTEN, iso_match_dst, BDADDR_ANY); -- cgit v1.2.3 From e9cb51813d79fc9aae4a2098aab3ab6ebd7fb6c8 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:27 +0300 Subject: Bluetooth: ISO: fix timeout vs sync_timeout typo in check_bcast_qos In iso.c check_bcast_qos(), missing bcast.timeout is not set to its default value, and appears typoed as bcast.sync_timeout. Fix the typo. Fixes: b37cab587aa3 ("Bluetooth: ISO: Don't reject BT_ISO_QOS if parameters are unset") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 651661833966..e51253e5c161 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -1796,7 +1796,7 @@ static bool check_bcast_qos(struct bt_iso_qos *qos) return false; if (!qos->bcast.timeout) - qos->bcast.sync_timeout = BT_ISO_SYNC_TIMEOUT; + qos->bcast.timeout = BT_ISO_SYNC_TIMEOUT; if (qos->bcast.timeout < 0x000a || qos->bcast.timeout > 0x4000) return false; -- cgit v1.2.3 From 4e20192d46a685d73e590a60a4a2419a0a8afcbf Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:28 +0300 Subject: Bluetooth: ISO: validate sockaddr_iso first in iso_sock_rebind_bis() iso_sock_rebind_bis() updates socket iso_pi(sk)->bc_num_bis before validating the BIS values, so it's possible to end up with bc_num_bis inconsistent. Assign to iso_pi(sk)->bc_num_bis only after validation. Fixes: 80837140c1f2 ("Bluetooth: ISO: Allow binding a PA sync socket") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index e51253e5c161..5de4a2f886eb 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -1039,15 +1039,15 @@ static int iso_sock_rebind_bis(struct sock *sk, struct sockaddr_iso *sa, goto done; } - iso_pi(sk)->bc_num_bis = sa->iso_bc->bc_num_bis; - - for (int i = 0; i < iso_pi(sk)->bc_num_bis; i++) + for (int i = 0; i < sa->iso_bc->bc_num_bis; i++) if (sa->iso_bc->bc_bis[i] < 0x01 || sa->iso_bc->bc_bis[i] > 0x1f) { err = -EINVAL; goto done; } + iso_pi(sk)->bc_num_bis = sa->iso_bc->bc_num_bis; + memcpy(iso_pi(sk)->bc_bis, sa->iso_bc->bc_bis, iso_pi(sk)->bc_num_bis); -- cgit v1.2.3 From 0d255e63fcf3f13a570d7ac11678fa1164ac015c Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:29 +0300 Subject: Bluetooth: ISO: hold sk properly in iso_conn_ready sk deref in iso_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk is currently accessed without either: [Task 1] [Task 2] iso_sock_release iso_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) iso_sock_kill(sk) UAF on sk deref Fix possible UAF by holding sk refcount in iso_conn_ready(). Also recheck after lock_sock that the socket is still valid. Adjust locking so conn->sk is cleared only under lock_sock. Fixes: 27c24fda62b60 ("Bluetooth: switch to lock_sock in SCO") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 5de4a2f886eb..80a58275891d 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -805,11 +805,13 @@ static void iso_sock_kill(struct sock *sk) BT_DBG("sk %p state %d", sk, sk->sk_state); /* Sock is dead, so set conn->sk to NULL to avoid possible UAF */ + lock_sock(sk); if (iso_pi(sk)->conn) { iso_conn_lock(iso_pi(sk)->conn); iso_pi(sk)->conn->sk = NULL; iso_conn_unlock(iso_pi(sk)->conn); } + release_sock(sk); /* Kill poor orphan */ bt_sock_unlink(&iso_sk_list, sk); @@ -2047,23 +2049,17 @@ static void iso_sock_ready(struct sock *sk) { BT_DBG("sk %p", sk); - if (!sk) - return; - - lock_sock(sk); + lockdep_assert(lockdep_sock_is_held(sk)); switch (sk->sk_state) { case BT_DISCONN: case BT_CLOSED: - release_sock(sk); return; } iso_sock_clear_timer(sk); sk->sk_state = BT_CONNECTED; sk->sk_state_change(sk); - - release_sock(sk); } static bool iso_match_big(struct sock *sk, void *data) @@ -2093,7 +2089,7 @@ static bool iso_match_dst(struct sock *sk, void *data) static void iso_conn_ready(struct iso_conn *conn) { struct sock *parent = NULL; - struct sock *sk = conn->sk; + struct sock *sk; struct hci_ev_le_big_sync_established *ev = NULL; struct hci_ev_le_pa_sync_established *ev2 = NULL; struct hci_ev_le_per_adv_report *ev3 = NULL; @@ -2102,7 +2098,22 @@ static void iso_conn_ready(struct iso_conn *conn) BT_DBG("conn %p", conn); + iso_conn_lock(conn); + sk = iso_sock_hold(conn); + iso_conn_unlock(conn); + if (sk) { + lock_sock(sk); + + /* conn->sk may have become NULL if racing with sk close, but + * due to held hdev->lock, it can't become different sk. + */ + if (!conn->sk) { + release_sock(sk); + sock_put(sk); + return; + } + /* Attempt to update source address in case of BIS Sender if * the advertisement is using a random address. */ @@ -2115,14 +2126,15 @@ static void iso_conn_ready(struct iso_conn *conn) adv = hci_find_adv_instance(bis->hdev, bis->iso_qos.bcast.bis); if (adv && bacmp(&adv->random_addr, BDADDR_ANY)) { - lock_sock(sk); iso_pi(sk)->src_type = BDADDR_LE_RANDOM; bacpy(&iso_pi(sk)->src, &adv->random_addr); - release_sock(sk); } } - iso_sock_ready(conn->sk); + iso_sock_ready(sk); + + release_sock(sk); + sock_put(sk); } else { hcon = conn->hcon; if (!hcon) -- cgit v1.2.3 From ce57442a379212fe3fda59c9437ee8217eceb5b1 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:30 +0300 Subject: Bluetooth: ISO: fix leaking sk after socket release iso_sock_kill() tests !sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket || sock_flag(sk, SOCK_DEAD) for early return, but this is always true since sock_orphan(sk) sets SOCK_DEAD, so the sk reference released by socket always leaks, iso_sock_destruct is never called. The socket reference also leaks when __iso_sock_close() does not set SOCK_ZAPPED, since iso_conn_del() does not call iso_sock_kill() after zapping. Fix by replacing SOCK_DEAD by BT_SK_KILLED flag that is not used for something else, and lock_sock to ensure iso_sock_kill() puts sk only after socket release only once. Release and iso_conn_del may run concurrently. Call iso_sock_kill() from iso_conn_del() to clean sk up after zapping. Remove call to iso_sock_kill() from iso_sock_close(), as it's generally no-op there. Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 80a58275891d..5f0f45a573a7 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -62,6 +62,7 @@ static void iso_sock_kill(struct sock *sk); enum { BT_SK_BIG_SYNC, BT_SK_PA_SYNC, + BT_SK_KILLED, }; struct iso_pinfo { @@ -295,6 +296,7 @@ static void iso_conn_del(struct hci_conn *hcon, int err) iso_sock_clear_timer(sk); iso_chan_del(sk, err); release_sock(sk); + iso_sock_kill(sk); sock_put(sk); } @@ -798,24 +800,29 @@ static void iso_sock_cleanup_listen(struct sock *parent) */ static void iso_sock_kill(struct sock *sk) { + lock_sock(sk); + if (!sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket || - sock_flag(sk, SOCK_DEAD)) + test_bit(BT_SK_KILLED, &iso_pi(sk)->flags)) { + release_sock(sk); return; + } BT_DBG("sk %p state %d", sk, sk->sk_state); /* Sock is dead, so set conn->sk to NULL to avoid possible UAF */ - lock_sock(sk); if (iso_pi(sk)->conn) { iso_conn_lock(iso_pi(sk)->conn); iso_pi(sk)->conn->sk = NULL; iso_conn_unlock(iso_pi(sk)->conn); } - release_sock(sk); /* Kill poor orphan */ bt_sock_unlink(&iso_sk_list, sk); sock_set_flag(sk, SOCK_DEAD); + set_bit(BT_SK_KILLED, &iso_pi(sk)->flags); + + release_sock(sk); sock_put(sk); } @@ -892,7 +899,6 @@ static void iso_sock_close(struct sock *sk) iso_sock_clear_timer(sk); __iso_sock_close(sk); release_sock(sk); - iso_sock_kill(sk); } static void iso_sock_init(struct sock *sk, struct sock *parent) @@ -2040,8 +2046,16 @@ static int iso_sock_release(struct socket *sock) release_sock(sk); } + /* Make sure sk is valid even if iso_conn_del() is concurrent */ + sock_hold(sk); + + lock_sock(sk); sock_orphan(sk); + release_sock(sk); + iso_sock_kill(sk); + + sock_put(sk); return err; } -- cgit v1.2.3 From 200fa1629c57a3ca2b03d3ca63fd3a9bfd910c43 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:31 +0300 Subject: Bluetooth: ISO: avoid deadlocks in iso_sock_timeout iso_sock_timeout() takes lock_sock, so sync disabling the timer while holding that lock may deadlock. iso_sock_timeout() may also run concurrently with iso_conn_del(), which leads to UAF [Task 1] [Task hdev->workqueue] iso_sock_timeout iso_conn_del iso_conn_hold_unless_zero iso_chan_del `------------> iso_conn_put caller frees hcon iso_conn_put iso_conn_free conn->hcon->iso_data = NULL; /* UAF */ Fix the deadlock by removing the disable from the lock_sock sections. Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn which may need to be freed in lock_sock section. Convert some of the clear_timer to disable_timer. Fixes: dc26097bdb86 ("Bluetooth: ISO: Use kref to track lifetime of iso_conn") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 60 ++++++++++++++++++++++++++--------------------------- 1 file changed, 29 insertions(+), 31 deletions(-) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 5f0f45a573a7..0cc08416fde5 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -37,8 +37,6 @@ struct iso_conn { spinlock_t lock; struct sock *sk; - struct delayed_work timeout_work; - struct sk_buff *rx_skb; __u32 rx_len; __u16 tx_sn; @@ -81,6 +79,7 @@ struct iso_pinfo { __u8 base_len; __u8 base[BASE_MAX_LENGTH]; struct iso_conn *conn; + struct delayed_work timeout_work; }; static struct bt_iso_qos default_qos; @@ -118,9 +117,6 @@ static void iso_conn_free(struct kref *ref) hci_conn_drop(conn->hcon); } - /* Ensure no more work items will run since hci_conn has been dropped */ - disable_delayed_work_sync(&conn->timeout_work); - kfree_skb(conn->rx_skb); kfree(conn); @@ -161,48 +157,45 @@ static struct sock *iso_sock_hold(struct iso_conn *conn) static void iso_sock_timeout(struct work_struct *work) { - struct iso_conn *conn = container_of(work, struct iso_conn, - timeout_work.work); - struct sock *sk; - - conn = iso_conn_hold_unless_zero(conn); - if (!conn) - return; - - iso_conn_lock(conn); - sk = iso_sock_hold(conn); - iso_conn_unlock(conn); - iso_conn_put(conn); - - if (!sk) - return; + struct iso_pinfo *pi = container_of(work, struct iso_pinfo, + timeout_work.work); + struct sock *sk = &pi->bt.sk; BT_DBG("sock %p state %d", sk, sk->sk_state); lock_sock(sk); - sk->sk_err = ETIMEDOUT; - sk->sk_state_change(sk); + if (!sock_flag(sk, SOCK_ZAPPED)) { + sk->sk_err = ETIMEDOUT; + sk->sk_state_change(sk); + } release_sock(sk); - sock_put(sk); } static void iso_sock_set_timer(struct sock *sk, long timeout) { + lockdep_assert(lockdep_sock_is_held(sk)); + + cancel_delayed_work(&iso_pi(sk)->timeout_work); + if (!iso_pi(sk)->conn) return; BT_DBG("sock %p state %d timeout %ld", sk, sk->sk_state, timeout); - cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); - schedule_delayed_work(&iso_pi(sk)->conn->timeout_work, timeout); + schedule_delayed_work(&iso_pi(sk)->timeout_work, timeout); } static void iso_sock_clear_timer(struct sock *sk) { - if (!iso_pi(sk)->conn) - return; + BT_DBG("sock %p state %d", sk, sk->sk_state); + cancel_delayed_work(&iso_pi(sk)->timeout_work); +} + +static void iso_sock_disable_timer(struct sock *sk) +{ + lockdep_assert(!lockdep_sock_is_held(sk)); BT_DBG("sock %p state %d", sk, sk->sk_state); - cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); + disable_delayed_work_sync(&iso_pi(sk)->timeout_work); } /* ---- ISO connections ---- */ @@ -227,7 +220,6 @@ static struct iso_conn *iso_conn_add(struct hci_conn *hcon) kref_init(&conn->ref); spin_lock_init(&conn->lock); - INIT_DELAYED_WORK(&conn->timeout_work, iso_sock_timeout); hcon->iso_data = conn; conn->hcon = hcon; @@ -292,8 +284,9 @@ static void iso_conn_del(struct hci_conn *hcon, int err) return; } + iso_sock_disable_timer(sk); + lock_sock(sk); - iso_sock_clear_timer(sk); iso_chan_del(sk, err); release_sock(sk); iso_sock_kill(sk); @@ -800,6 +793,8 @@ static void iso_sock_cleanup_listen(struct sock *parent) */ static void iso_sock_kill(struct sock *sk) { + iso_sock_disable_timer(sk); + lock_sock(sk); if (!sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket || @@ -895,8 +890,9 @@ static void __iso_sock_close(struct sock *sk) /* Must be called on unlocked socket. */ static void iso_sock_close(struct sock *sk) { + iso_sock_disable_timer(sk); + lock_sock(sk); - iso_sock_clear_timer(sk); __iso_sock_close(sk); release_sock(sk); } @@ -965,6 +961,8 @@ static struct sock *iso_sock_alloc(struct net *net, struct socket *sock, iso_pi(sk)->qos = default_qos; iso_pi(sk)->sync_handle = -1; + INIT_DELAYED_WORK(&iso_pi(sk)->timeout_work, iso_sock_timeout); + bt_sock_link(&iso_sk_list, sk); return sk; } -- cgit v1.2.3 From aa9f7cb2bd3a2be998ceb739fc9a2f986eba43eb Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:32 +0300 Subject: Bluetooth: ISO: ensure no dangling hcon references in iso_conn After iso_conn_del(), ISO sockets should not dereference the hcon any more. Currently, clearing iso_conn::hcon relies on iso_conn_del() releasing the last reference to the iso_conn. Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to avoid more complex reasoning on races about who holds the last reference. Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 0cc08416fde5..bfd39baa8503 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -263,6 +263,7 @@ static void iso_chan_del(struct sock *sk, int err) } static void iso_conn_del(struct hci_conn *hcon, int err) + __must_hold(&hcon->hdev->lock) { struct iso_conn *conn = hcon->iso_data; struct sock *sk; @@ -277,11 +278,10 @@ static void iso_conn_del(struct hci_conn *hcon, int err) iso_conn_lock(conn); sk = iso_sock_hold(conn); iso_conn_unlock(conn); - iso_conn_put(conn); if (!sk) { iso_conn_put(conn); - return; + goto done; } iso_sock_disable_timer(sk); @@ -291,6 +291,15 @@ static void iso_conn_del(struct hci_conn *hcon, int err) release_sock(sk); iso_sock_kill(sk); sock_put(sk); + +done: + /* No sk access to conn->hcon any more (lock_sock + hdev->lock) */ + iso_conn_lock(conn); + conn->hcon = NULL; + hcon->iso_data = NULL; + iso_conn_unlock(conn); + + iso_conn_put(conn); } static int __iso_chan_add(struct iso_conn *conn, struct sock *sk, @@ -306,6 +315,11 @@ static int __iso_chan_add(struct iso_conn *conn, struct sock *sk, return -EBUSY; } + if (!conn->hcon) { + BT_ERR("conn->hcon missing"); + return -EIO; + } + iso_pi(sk)->conn = conn; conn->sk = sk; clear_bit(ISO_CONN_DROPPED, conn->flags); @@ -2500,6 +2514,7 @@ done: } static void iso_connect_cfm(struct hci_conn *hcon, __u8 status) + __must_hold(&hcon->hdev->lock) { if (hcon->type != CIS_LINK && hcon->type != BIS_LINK && hcon->type != PA_LINK) { @@ -2511,8 +2526,10 @@ static void iso_connect_cfm(struct hci_conn *hcon, __u8 status) struct hci_link *link, *t; list_for_each_entry_safe(link, t, &hcon->link_list, - list) + list) { + lockdep_assert_held(&link->conn->hdev->lock); iso_conn_del(link->conn, bt_to_errno(status)); + } return; } @@ -2542,6 +2559,7 @@ static void iso_connect_cfm(struct hci_conn *hcon, __u8 status) } static void iso_disconn_cfm(struct hci_conn *hcon, __u8 reason) + __must_hold(&hcon->hdev->lock) { if (hcon->type != CIS_LINK && hcon->type != BIS_LINK && hcon->type != PA_LINK) -- cgit v1.2.3 From fdfde532ab1caa165fcd8985001157ac8b4db365 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:33 +0300 Subject: Bluetooth: ISO: fix refcounting of iso_conn MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit iso_conn_del() and iso_chan_del() have a race that results to double-put of iso_conn: [Task hdev->workqueue] [Task 2] iso_conn_del iso_chan_del iso_conn_hold_unless_zero iso_conn_lock iso_conn_lock conn->sk = NULL iso_conn_unlock sk = iso_sock_hold(conn) <---------´ if (!sk) iso_conn_put iso_conn_put iso_conn_put /* UAF */ The extra put for !sk in iso_conn_del() is currently required since failing iso_chan_add() may leave iso_conn not associated with any sk. Fix by having iso_pi(sk)->conn own refcount when non-NULL, so iso_conn_del does not need to put it. Adjust the iso_conn_add() refcounting so that conn is put if it does not get associated with an sk. Fixes: dc26097bdb86 ("Bluetooth: ISO: Use kref to track lifetime of iso_conn") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index bfd39baa8503..30de99ba4b30 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -108,9 +108,6 @@ static void iso_conn_free(struct kref *ref) BT_DBG("conn %p", conn); - if (conn->sk) - iso_pi(conn->sk)->conn = NULL; - if (conn->hcon) { conn->hcon->iso_data = NULL; if (!test_and_set_bit(ISO_CONN_DROPPED, conn->flags)) @@ -145,6 +142,14 @@ static struct iso_conn *iso_conn_hold_unless_zero(struct iso_conn *conn) return conn; } +static struct iso_conn *iso_conn_hold(struct iso_conn *conn) +{ + BT_DBG("conn %p refcnt %u", conn, kref_read(&conn->ref)); + + kref_get(&conn->ref); + return conn; +} + static struct sock *iso_sock_hold(struct iso_conn *conn) { if (!conn || !bt_sock_linked(&iso_sk_list, conn->sk)) @@ -210,7 +215,6 @@ static struct iso_conn *iso_conn_add(struct hci_conn *hcon) conn->hcon = hcon; iso_conn_unlock(conn); } - iso_conn_put(conn); return conn; } @@ -279,10 +283,8 @@ static void iso_conn_del(struct hci_conn *hcon, int err) sk = iso_sock_hold(conn); iso_conn_unlock(conn); - if (!sk) { - iso_conn_put(conn); + if (!sk) goto done; - } iso_sock_disable_timer(sk); @@ -320,7 +322,7 @@ static int __iso_chan_add(struct iso_conn *conn, struct sock *sk, return -EIO; } - iso_pi(sk)->conn = conn; + iso_pi(sk)->conn = iso_conn_hold(conn); conn->sk = sk; clear_bit(ISO_CONN_DROPPED, conn->flags); @@ -427,6 +429,7 @@ static int iso_connect_bis(struct sock *sk) } err = iso_chan_add(conn, sk, NULL); + iso_conn_put(conn); if (err) goto unlock; @@ -529,6 +532,7 @@ static int iso_connect_cis(struct sock *sk) } err = iso_chan_add(conn, sk, NULL); + iso_conn_put(conn); if (err) goto unlock; @@ -1310,10 +1314,9 @@ static int iso_listen_bis(struct sock *sk) } err = iso_chan_add(conn, sk, NULL); - if (err) { - hci_conn_drop(hcon); + iso_conn_put(conn); + if (err) goto unlock; - } unlock: release_sock(sk); @@ -2551,8 +2554,10 @@ static void iso_connect_cfm(struct hci_conn *hcon, __u8 status) struct iso_conn *conn; conn = iso_conn_add(hcon); - if (conn) + if (conn) { iso_conn_ready(conn); + iso_conn_put(conn); + } } else { iso_conn_del(hcon, bt_to_errno(status)); } -- cgit v1.2.3 From af24e338bf5dafb80f42baa9a0b9e9b57b1c5d9c Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Jul 2026 23:20:34 +0300 Subject: Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero hci_conn::iso_data is accessed and modified without lock or RCU. This leads to a race [Task hdev->workqueue] [Task 2] iso_recv iso_conn_put(conn) conn = LOAD hcon->iso_data iso_conn_free(conn) iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL kfree(conn) kref_get_unless_zero(&conn->ref) /* UAF */ and also to races in iso_conn_add() vs. iso_conn_free(). Fix by adding spinlock hci_conn::proto_lock and using it to guard hci_conn::iso_data. Fixes: dc26097bdb86 ("Bluetooth: ISO: Use kref to track lifetime of iso_conn") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- include/net/bluetooth/hci_core.h | 4 ++- net/bluetooth/hci_conn.c | 2 ++ net/bluetooth/iso.c | 64 +++++++++++++++++++++++++++++++++------- 3 files changed, 58 insertions(+), 12 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index e7133ff87fbf..3df59849dcbe 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -767,9 +767,11 @@ struct hci_conn { struct dentry *debugfs; struct hci_dev *hdev; + + spinlock_t proto_lock; /* lock guarding protocol data */ void *l2cap_data; void *sco_data; - void *iso_data; + void *iso_data __guarded_by(&proto_lock); struct list_head link_list; struct hci_conn *parent; diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 1966cd153d97..ebb04badf10c 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -1123,6 +1123,8 @@ static struct hci_conn *__hci_conn_add(struct hci_dev *hdev, int type, INIT_DELAYED_WORK(&conn->idle_work, hci_conn_idle); INIT_DELAYED_WORK(&conn->le_conn_timeout, le_conn_timeout); + spin_lock_init(&conn->proto_lock); + atomic_set(&conn->refcnt, 0); hci_dev_hold(hdev); diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 30de99ba4b30..a461c8a4efed 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -109,9 +109,16 @@ static void iso_conn_free(struct kref *ref) BT_DBG("conn %p", conn); if (conn->hcon) { - conn->hcon->iso_data = NULL; - if (!test_and_set_bit(ISO_CONN_DROPPED, conn->flags)) - hci_conn_drop(conn->hcon); + spin_lock(&conn->hcon->proto_lock); + + /* Check we are not racing with iso_conn_add */ + if (conn->hcon->iso_data == conn) { + conn->hcon->iso_data = NULL; + if (!test_and_set_bit(ISO_CONN_DROPPED, conn->flags)) + hci_conn_drop(conn->hcon); + } + + spin_unlock(&conn->hcon->proto_lock); } kfree_skb(conn->rx_skb); @@ -126,7 +133,21 @@ static void iso_conn_put(struct iso_conn *conn) BT_DBG("conn %p refcnt %d", conn, kref_read(&conn->ref)); + /* The following race vs. iso_conn_del() is possible: + * + * 1. conn->hcon != NULL here + * 2. kref_put puts the last reference + * 3. concurrent iso_conn_del() gets iso_conn_hold_unless_zero() -> NULL + * and returns immediately, so conn->hcon is not cleared + * 4. iso_conn_free() dereferences conn->hcon + * + * To avoid UAF in step 4, take RCU before decrementing the refcount. + */ + rcu_read_lock(); + kref_put(&conn->ref, iso_conn_free); + + rcu_read_unlock(); } static struct iso_conn *iso_conn_hold_unless_zero(struct iso_conn *conn) @@ -205,22 +226,28 @@ static void iso_sock_disable_timer(struct sock *sk) /* ---- ISO connections ---- */ static struct iso_conn *iso_conn_add(struct hci_conn *hcon) + __must_hold(&hcon->hdev->lock) { - struct iso_conn *conn = hcon->iso_data; + struct iso_conn *conn; + + spin_lock(&hcon->proto_lock); - conn = iso_conn_hold_unless_zero(conn); + conn = iso_conn_hold_unless_zero(hcon->iso_data); if (conn) { if (!conn->hcon) { iso_conn_lock(conn); conn->hcon = hcon; iso_conn_unlock(conn); } + spin_unlock(&hcon->proto_lock); return conn; } - conn = kzalloc_obj(*conn); - if (!conn) + conn = kzalloc_obj(*conn, GFP_ATOMIC); + if (!conn) { + spin_unlock(&hcon->proto_lock); return NULL; + } kref_init(&conn->ref); spin_lock_init(&conn->lock); @@ -229,6 +256,8 @@ static struct iso_conn *iso_conn_add(struct hci_conn *hcon) conn->hcon = hcon; conn->tx_sn = 0; + spin_unlock(&hcon->proto_lock); + BT_DBG("hcon %p conn %p", hcon, conn); return conn; @@ -269,10 +298,12 @@ static void iso_chan_del(struct sock *sk, int err) static void iso_conn_del(struct hci_conn *hcon, int err) __must_hold(&hcon->hdev->lock) { - struct iso_conn *conn = hcon->iso_data; + struct iso_conn *conn; struct sock *sk; - conn = iso_conn_hold_unless_zero(conn); + spin_lock(&hcon->proto_lock); + conn = iso_conn_hold_unless_zero(hcon->iso_data); + spin_unlock(&hcon->proto_lock); if (!conn) return; @@ -296,10 +327,12 @@ static void iso_conn_del(struct hci_conn *hcon, int err) done: /* No sk access to conn->hcon any more (lock_sock + hdev->lock) */ + spin_lock(&hcon->proto_lock); iso_conn_lock(conn); conn->hcon = NULL; hcon->iso_data = NULL; iso_conn_unlock(conn); + spin_unlock(&hcon->proto_lock); iso_conn_put(conn); } @@ -421,6 +454,8 @@ static int iso_connect_bis(struct sock *sk) iso_pi(sk)->bc_sid = hcon->sid; } + lockdep_assert_held(&hcon->hdev->lock); + conn = iso_conn_add(hcon); if (!conn) { hci_conn_drop(hcon); @@ -524,6 +559,8 @@ static int iso_connect_cis(struct sock *sk) } } + lockdep_assert_held(&hcon->hdev->lock); + conn = iso_conn_add(hcon); if (!conn) { hci_conn_drop(hcon); @@ -855,8 +892,8 @@ static void iso_sock_disconn(struct sock *sk) */ if (bis_sk) { hcon->state = BT_OPEN; - hcon->iso_data = NULL; - iso_pi(sk)->conn->hcon = NULL; + set_bit(ISO_CONN_DROPPED, iso_pi(sk)->conn->flags); + iso_sock_clear_timer(sk); iso_chan_del(sk, bt_to_errno(hcon->abort_reason)); sock_put(bis_sk); @@ -1306,6 +1343,8 @@ static int iso_listen_bis(struct sock *sk) goto unlock; } + lockdep_assert_held(&hcon->hdev->lock); + conn = iso_conn_add(hcon); if (!conn) { hci_conn_drop(hcon); @@ -2591,7 +2630,10 @@ int iso_recv(struct hci_dev *hdev, u16 handle, struct sk_buff *skb, u16 flags) return -ENOENT; } + spin_lock(&hcon->proto_lock); conn = iso_conn_hold_unless_zero(hcon->iso_data); + spin_unlock(&hcon->proto_lock); + hcon = NULL; hci_dev_unlock(hdev); -- cgit v1.2.3 From b640ff9af3c809ff5ea2077fbba17df1594ec1e4 Mon Sep 17 00:00:00 2001 From: Zijun Hu Date: Sat, 25 Jul 2026 01:54:40 -0700 Subject: Bluetooth: btintel: Validate length before parsing diagnostics TLV btintel_diagnostics() accesses tlv->val[0] without first validating that the diagnostics VSE is long enough to contain that field, so may cause reading data beyond the received frame. Fix by validating the length before access. Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support") Signed-off-by: Zijun Hu Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btintel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c index 5e9cac090bd8..bf567b7c5f00 100644 --- a/drivers/bluetooth/btintel.c +++ b/drivers/bluetooth/btintel.c @@ -3771,6 +3771,9 @@ static int btintel_diagnostics(struct hci_dev *hdev, struct sk_buff *skb) { struct intel_tlv *tlv = (void *)&skb->data[5]; + if (skb->len < 5 + sizeof(*tlv) + sizeof(tlv->val[0])) + goto recv_frame; + /* The first event is always an event type TLV */ if (tlv->type != INTEL_TLV_TYPE_ID) goto recv_frame; -- cgit v1.2.3 From 5761d003daa987ac81463f570713ce9c9dd204e5 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Sat, 25 Jul 2026 12:59:17 +0300 Subject: Bluetooth: hci_conn: hold conn reference in abort_conn_sync() There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. Fixes: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_conn.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index ebb04badf10c..b1f911fd4ad6 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -3165,6 +3165,13 @@ static int abort_conn_sync(struct hci_dev *hdev, void *data) return hci_abort_conn_sync(hdev, conn, conn->abort_reason); } +static void abort_conn_destroy(struct hci_dev *hdev, void *data, int err) +{ + struct hci_conn *conn = data; + + hci_conn_put(conn); +} + int hci_abort_conn(struct hci_conn *conn, u8 reason) { struct hci_dev *hdev = conn->hdev; @@ -3190,7 +3197,10 @@ int hci_abort_conn(struct hci_conn *conn, u8 reason) * as a result to MGMT_OP_DISCONNECT/MGMT_OP_UNPAIR which does * already queue its callback on cmd_sync_work. */ - err = hci_cmd_sync_run_once(hdev, abort_conn_sync, conn, NULL); + err = hci_cmd_sync_run_once(hdev, abort_conn_sync, hci_conn_get(conn), + abort_conn_destroy); + if (err) + hci_conn_put(conn); return (err == -EEXIST) ? 0 : err; } -- cgit v1.2.3 From 2f5d635ad5906b0235bc0c870e8beba3116e1e98 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Sat, 25 Jul 2026 12:59:18 +0300 Subject: Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. Fixes: 881559af5f5c ("Bluetooth: hci_sync: Attempt to dequeue connection attempt") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_sync.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index aa3d53818812..79cd52974eb0 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -7152,12 +7152,23 @@ static int hci_acl_create_conn_sync(struct hci_dev *hdev, void *data) return err; } +static void hci_acl_create_conn_sync_complete(struct hci_dev *hdev, void *data, + int err) +{ + struct hci_conn *conn = data; + + hci_conn_put(conn); +} + int hci_connect_acl_sync(struct hci_dev *hdev, struct hci_conn *conn) { int err; - err = hci_cmd_sync_queue_once(hdev, hci_acl_create_conn_sync, conn, - NULL); + err = hci_cmd_sync_queue_once(hdev, hci_acl_create_conn_sync, + hci_conn_get(conn), + hci_acl_create_conn_sync_complete); + if (err) + hci_conn_put(conn); return (err == -EEXIST) ? 0 : err; } @@ -7168,36 +7179,41 @@ static void create_le_conn_complete(struct hci_dev *hdev, void *data, int err) bt_dev_dbg(hdev, "err %d", err); if (err == -ECANCELED) - return; + goto done; hci_dev_lock(hdev); if (!hci_conn_valid(hdev, conn)) - goto done; + goto unlock; if (!err) { hci_connect_le_scan_cleanup(conn, 0x00); - goto done; + goto unlock; } /* Check if connection is still pending */ if (conn != hci_lookup_le_connect(hdev)) - goto done; + goto unlock; /* Flush to make sure we send create conn cancel command if needed */ flush_delayed_work(&conn->le_conn_timeout); hci_conn_failed(conn, bt_status(err)); -done: +unlock: hci_dev_unlock(hdev); +done: + hci_conn_put(conn); } int hci_connect_le_sync(struct hci_dev *hdev, struct hci_conn *conn) { int err; - err = hci_cmd_sync_queue_once(hdev, hci_le_create_conn_sync, conn, + err = hci_cmd_sync_queue_once(hdev, hci_le_create_conn_sync, + hci_conn_get(conn), create_le_conn_complete); + if (err) + hci_conn_put(conn); return (err == -EEXIST) ? 0 : err; } -- cgit v1.2.3 From 56e78b670356caab0b607e8aad4cf819a1909d07 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Sat, 25 Jul 2026 12:59:19 +0300 Subject: Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to match the previous behavior. Fixes: 024421cf3992 ("Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_sync.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index 79cd52974eb0..cdc7dff7054c 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -7522,10 +7522,12 @@ static void create_big_complete(struct hci_dev *hdev, void *data, int err) bt_dev_dbg(hdev, "err %d", err); if (err == -ECANCELED) - return; + goto done; - if (hci_conn_valid(hdev, conn)) - clear_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags); + clear_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags); + +done: + hci_conn_put(conn); } static int hci_le_big_create_sync(struct hci_dev *hdev, void *data) @@ -7577,8 +7579,14 @@ int hci_connect_big_sync(struct hci_dev *hdev, struct hci_conn *conn) { int err; - err = hci_cmd_sync_queue_once(hdev, hci_le_big_create_sync, conn, + if (!conn) + return 0; + + err = hci_cmd_sync_queue_once(hdev, hci_le_big_create_sync, + hci_conn_get(conn), create_big_complete); + if (err) + hci_conn_put(conn); return (err == -EEXIST) ? 0 : err; } -- cgit v1.2.3 From 44fc74069d8988f2825246f9401218e29de2c0ab Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Sat, 25 Jul 2026 12:59:20 +0300 Subject: Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. Fixes: 6d0417e4e1cf ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_sync.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index cdc7dff7054c..f50d7cd3a331 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -7336,7 +7336,7 @@ static void create_pa_complete(struct hci_dev *hdev, void *data, int err) bt_dev_dbg(hdev, "err %d", err); if (err == -ECANCELED) - return; + goto done; hci_dev_lock(hdev); @@ -7360,6 +7360,8 @@ static void create_pa_complete(struct hci_dev *hdev, void *data, int err) unlock: hci_dev_unlock(hdev); +done: + hci_conn_put(conn); } static int hci_le_past_params_sync(struct hci_dev *hdev, struct hci_conn *conn, @@ -7510,8 +7512,11 @@ int hci_connect_pa_sync(struct hci_dev *hdev, struct hci_conn *conn) { int err; - err = hci_cmd_sync_queue_once(hdev, hci_le_pa_create_sync, conn, + err = hci_cmd_sync_queue_once(hdev, hci_le_pa_create_sync, + hci_conn_get(conn), create_pa_complete); + if (err) + hci_conn_put(conn); return (err == -EEXIST) ? 0 : err; } -- cgit v1.2.3 From abf9753edf3f88282c44a605f3945d8d4f8dd86c Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Sat, 25 Jul 2026 12:59:21 +0300 Subject: Bluetooth: hci_sync: hold conn in hci_past_sync() callback Avoids giving freed pointers to hci_conn_valid(), which kmalloc may have reused. Hold refcount to avoid that. Fixes: d3413703d5f8 ("Bluetooth: ISO: Add support to bind to trigger PAST") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_sync.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index f50d7cd3a331..0118342ac7ea 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -7606,6 +7606,8 @@ static void past_complete(struct hci_dev *hdev, void *data, int err) bt_dev_dbg(hdev, "err %d", err); + hci_conn_put(past->conn); + hci_conn_put(past->le); kfree(past); } @@ -7670,8 +7672,8 @@ int hci_past_sync(struct hci_conn *conn, struct hci_conn *le) if (!data) return -ENOMEM; - data->conn = conn; - data->le = le; + data->conn = hci_conn_get(conn); + data->le = hci_conn_get(le); if (conn->role == HCI_ROLE_MASTER) err = hci_cmd_sync_queue_once(conn->hdev, @@ -7681,8 +7683,11 @@ int hci_past_sync(struct hci_conn *conn, struct hci_conn *le) err = hci_cmd_sync_queue_once(conn->hdev, hci_le_past_sync, data, past_complete); - if (err) + if (err) { + hci_conn_put(data->conn); + hci_conn_put(data->le); kfree(data); + } return (err == -EEXIST) ? 0 : err; } -- cgit v1.2.3 From 2c1e4e00613dfd105f978be2276e5e265801ec9f Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Sat, 25 Jul 2026 12:59:22 +0300 Subject: Bluetooth: hci_sync: fix hci_conn_del() use in hci_le_create_conn_sync hci_conn_del() caller must hold hdev->lock, check the conn was not concurrently deleted, and usually inform socket the conn is going to be deleted. Use hci_abort_conn_sync() instead of calling hci_conn_del() without locks etc. Fixes: 8e8b92ee60de5 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_sync.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index 0118342ac7ea..10bc4c71509f 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -6757,7 +6757,9 @@ static int hci_le_create_conn_sync(struct hci_dev *hdev, void *data) if (hci_dev_test_flag(hdev, HCI_LE_SCAN) && hdev->le_scan_type == LE_SCAN_ACTIVE && !hci_dev_test_flag(hdev, HCI_LE_SIMULTANEOUS_ROLES)) { - hci_conn_del(conn); + conn->state = BT_OPEN; + hci_abort_conn_sync(hdev, conn, + HCI_ERROR_REJ_LIMITED_RESOURCES); hci_conn_put(conn); return -EBUSY; } -- cgit v1.2.3 From c0a9dcd2be398eee505d4b254ec3a845aa8ab189 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Sat, 25 Jul 2026 12:59:23 +0300 Subject: Bluetooth: hci_sync: remove unnecessary hci_conn_get in create_conn_sync hci_conn_get() without already held reference is data race against concurrent deletion. In previous patches, the refcount has been changed to be taken before starting the hci_sync task, so remove these extra get() + put() as they are not needed. Fixes: 12917f591cea ("Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_sync.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index 10bc4c71509f..c8d14128c363 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -6741,11 +6741,6 @@ static int hci_le_create_conn_sync(struct hci_dev *hdev, void *data) bt_dev_dbg(hdev, "conn %p", conn); - /* Hold a reference so conn stays valid for the HCI_CONN_CREATE - * clear_bit() at done. - */ - hci_conn_get(conn); - clear_bit(HCI_CONN_SCANNING, &conn->flags); conn->state = BT_CONNECT; @@ -6760,7 +6755,6 @@ static int hci_le_create_conn_sync(struct hci_dev *hdev, void *data) conn->state = BT_OPEN; hci_abort_conn_sync(hdev, conn, HCI_ERROR_REJ_LIMITED_RESOURCES); - hci_conn_put(conn); return -EBUSY; } @@ -6858,7 +6852,6 @@ done: /* Re-enable advertising after the connection attempt is finished. */ hci_resume_advertising_sync(hdev); - hci_conn_put(conn); return err; } @@ -7133,11 +7126,6 @@ static int hci_acl_create_conn_sync(struct hci_dev *hdev, void *data) else cp.role_switch = 0x00; - /* Hold a reference so conn stays valid for the HCI_CONN_CREATE - * clear_bit() below. - */ - hci_conn_get(conn); - /* Mark create connection in flight so hci_cancel_connect_sync() can * cancel it while blocking on the connection complete event. */ @@ -7149,7 +7137,6 @@ static int hci_acl_create_conn_sync(struct hci_dev *hdev, void *data) conn->conn_timeout, NULL); clear_bit(HCI_CONN_CREATE, &conn->flags); - hci_conn_put(conn); return err; } -- cgit v1.2.3 From b186c18c4843dd58adc29443369bddc71cb626a3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 27 Jul 2026 17:57:32 +0200 Subject: Bluetooth: btmtk: Fix short read errors in btmtk_usb_uhw_reg_read() If btmtk_usb_uhw_reg_read() gets a "short" read from a device, it will accidentally treat that as a "real" read and populate the returned value with some unknown and probably totally invalid data. Fix this logic error up by calling usb_control_msg_recv() which guarantees a "full" read happens, and then simplify the error checking for when btmtk_usb_uhw_reg_read() is called. Note, one caller of btmtk_usb_uhw_reg_read() does not check the return value, but as we pre-initialize the return value as 0, an incorrect read will not do anything wrong. Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btmtk.c | 50 +++++++++++++++++++++-------------------------- 1 file changed, 22 insertions(+), 28 deletions(-) diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c index 02a96342e964..6f060e4433db 100644 --- a/drivers/bluetooth/btmtk.c +++ b/drivers/bluetooth/btmtk.c @@ -804,30 +804,24 @@ static int btmtk_usb_uhw_reg_write(struct hci_dev *hdev, u32 reg, u32 val) static int btmtk_usb_uhw_reg_read(struct hci_dev *hdev, u32 reg, u32 *val) { struct btmtk_data *data = hci_get_priv(hdev); - int pipe, err; - void *buf; - - buf = kzalloc(4, GFP_KERNEL); - if (!buf) - return -ENOMEM; + u8 buf[sizeof(u32)]; + int err; - pipe = usb_rcvctrlpipe(data->udev, 0); - err = usb_control_msg(data->udev, pipe, 0x01, - 0xDE, - reg >> 16, reg & 0xffff, - buf, 4, USB_CTRL_GET_TIMEOUT); - if (err < 0) { + *val = 0; + err = usb_control_msg_recv(data->udev, 0, 0x01, + 0xDE, + reg >> 16, reg & 0xffff, + buf, sizeof(buf), USB_CTRL_GET_TIMEOUT, + GFP_KERNEL); + if (err) { bt_dev_err(hdev, "Failed to read uhw reg(%d)", err); - goto err_free_buf; + return err; } *val = get_unaligned_le32(buf); bt_dev_dbg(hdev, "reg=%x, value=0x%08x", reg, *val); -err_free_buf: - kfree(buf); - - return err; + return 0; } static int btmtk_usb_reg_read(struct hci_dev *hdev, u32 reg, u32 *val) @@ -877,7 +871,7 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) if (dev_id == 0x7922) { err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_SUBSYS_RST, &val); - if (err < 0) + if (err) return err; val |= 0x00002020; err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_SUBSYS_RST, val); @@ -887,7 +881,7 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) if (err < 0) return err; err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_SUBSYS_RST, &val); - if (err < 0) + if (err) return err; val |= BIT(0); err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_SUBSYS_RST, val); @@ -896,14 +890,14 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) msleep(100); } else if (dev_id == 0x7925 || dev_id == 0x6639) { err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_RESET_REG_CONNV3, &val); - if (err < 0) + if (err) return err; val |= (1 << 5); err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_RESET_REG_CONNV3, val); if (err < 0) return err; err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_RESET_REG_CONNV3, &val); - if (err < 0) + if (err) return err; val &= 0xFFFF00FF; val |= (1 << 13); @@ -914,7 +908,7 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) if (err < 0) return err; err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_RESET_REG_CONNV3, &val); - if (err < 0) + if (err) return err; val |= (1 << 0); err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_RESET_REG_CONNV3, val); @@ -924,13 +918,13 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) if (err < 0) return err; err = btmtk_usb_uhw_reg_read(hdev, MTK_UDMA_INT_STA_BT, &val); - if (err < 0) + if (err) return err; err = btmtk_usb_uhw_reg_write(hdev, MTK_UDMA_INT_STA_BT1, 0x000000FF); if (err < 0) return err; err = btmtk_usb_uhw_reg_read(hdev, MTK_UDMA_INT_STA_BT1, &val); - if (err < 0) + if (err) return err; msleep(100); } else { @@ -940,7 +934,7 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) if (err < 0) return err; err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_WDT_STATUS, &val); - if (err < 0) + if (err) return err; /* Reset the bluetooth chip via USB interface. */ err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_SUBSYS_RST, 1); @@ -950,13 +944,13 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) if (err < 0) return err; err = btmtk_usb_uhw_reg_read(hdev, MTK_UDMA_INT_STA_BT, &val); - if (err < 0) + if (err) return err; err = btmtk_usb_uhw_reg_write(hdev, MTK_UDMA_INT_STA_BT1, 0x000000FF); if (err < 0) return err; err = btmtk_usb_uhw_reg_read(hdev, MTK_UDMA_INT_STA_BT1, &val); - if (err < 0) + if (err) return err; /* MT7921 need to delay 20ms between toggle reset bit */ msleep(20); @@ -964,7 +958,7 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) if (err < 0) return err; err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_SUBSYS_RST, &val); - if (err < 0) + if (err) return err; } -- cgit v1.2.3 From 0cc4b5649ae83deb8222100dba31aa0f100a19cd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 27 Jul 2026 17:57:33 +0200 Subject: Bluetooth: btmtk: Fix short read errors in btmtk_usb_reg_read() If btmtk_usb_reg_read() gets a "short" read from a device, it will accidentally treat that as a "real" read and populate the returned value with some unknown and probably totally invalid data. Fix this logic error up by calling usb_control_msg_recv() which guarantees a "full" read happens, and then simplify the error checking for when btmtk_usb_reg_read() is called (it's really just btmtk_usb_id_get() that calls btmtk_usb_reg_read(), so fix up those return sites. Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btmtk.c | 36 +++++++++++++++--------------------- 1 file changed, 15 insertions(+), 21 deletions(-) diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c index 6f060e4433db..66b346761043 100644 --- a/drivers/bluetooth/btmtk.c +++ b/drivers/bluetooth/btmtk.c @@ -827,27 +827,21 @@ static int btmtk_usb_uhw_reg_read(struct hci_dev *hdev, u32 reg, u32 *val) static int btmtk_usb_reg_read(struct hci_dev *hdev, u32 reg, u32 *val) { struct btmtk_data *data = hci_get_priv(hdev); - int pipe, err, size = sizeof(u32); - void *buf; - - buf = kzalloc(size, GFP_KERNEL); - if (!buf) - return -ENOMEM; + u8 buf[sizeof(u32)]; + int err; - pipe = usb_rcvctrlpipe(data->udev, 0); - err = usb_control_msg(data->udev, pipe, 0x63, - USB_TYPE_VENDOR | USB_DIR_IN, - reg >> 16, reg & 0xffff, - buf, size, USB_CTRL_GET_TIMEOUT); + *val = 0; + err = usb_control_msg_recv(data->udev, 0, 0x63, + USB_TYPE_VENDOR | USB_DIR_IN, + reg >> 16, reg & 0xffff, + buf, sizeof(buf), USB_CTRL_GET_TIMEOUT, + GFP_KERNEL); if (err < 0) - goto err_free_buf; + return err; *val = get_unaligned_le32(buf); -err_free_buf: - kfree(buf); - - return err; + return 0; } static int btmtk_usb_id_get(struct hci_dev *hdev, u32 reg, u32 *id) @@ -974,7 +968,7 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) } err = btmtk_usb_id_get(hdev, 0x70010200, &val); - if (err < 0 || (!val && dev_id != 0x6639)) + if (err || (!val && dev_id != 0x6639)) bt_dev_err(hdev, "Can't get device id, subsys reset fail."); return err; @@ -1318,24 +1312,24 @@ int btmtk_usb_setup(struct hci_dev *hdev) calltime = ktime_get(); err = btmtk_usb_id_get(hdev, 0x80000008, &dev_id); - if (err < 0) { + if (err) { bt_dev_err(hdev, "Failed to get device id (%d)", err); return err; } if (!dev_id || dev_id != 0x7663) { err = btmtk_usb_id_get(hdev, 0x70010200, &dev_id); - if (err < 0) { + if (err) { bt_dev_err(hdev, "Failed to get device id (%d)", err); return err; } err = btmtk_usb_id_get(hdev, 0x80021004, &fw_version); - if (err < 0) { + if (err) { bt_dev_err(hdev, "Failed to get fw version (%d)", err); return err; } err = btmtk_usb_id_get(hdev, 0x70010020, &fw_flavor); - if (err < 0) { + if (err) { bt_dev_err(hdev, "Failed to get fw flavor (%d)", err); return err; } -- cgit v1.2.3 From cac43d360c928bc0cbbd18809632388265649761 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 27 Jul 2026 17:57:34 +0200 Subject: Bluetooth: btusb: Fix short read errors in btusb_qca_send_vendor_req() If btusb_qca_send_vendor_req() gets a "short" read from a device, it will accidentally treat that as a "real" read and populate the returned value with some unknown and probably totally invalid data. Fix this logic error up by calling usb_control_msg_recv() which guarantees a "full" read happens, and then simplify the error checking for when btusb_qca_send_vendor_req() is called. Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btusb.c | 30 +++++++++--------------------- 1 file changed, 9 insertions(+), 21 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 8f7ed469cac6..184e95c1625e 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -3424,28 +3424,16 @@ static const char *qca_get_fw_subdirectory(const struct qca_version *ver) static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, void *data, u16 size) { - int pipe, err; - u8 *buf; - - buf = kmalloc(size, GFP_KERNEL); - if (!buf) - return -ENOMEM; + int err; /* Found some of USB hosts have IOT issues with ours so that we should * not wait until HCI layer is ready. */ - pipe = usb_rcvctrlpipe(udev, 0); - err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN, - 0, 0, buf, size, USB_CTRL_GET_TIMEOUT); - if (err < 0) { + err = usb_control_msg_recv(udev, 0, request, USB_TYPE_VENDOR | USB_DIR_IN, + 0, 0, data, size, USB_CTRL_GET_TIMEOUT, + GFP_KERNEL); + if (err) dev_err(&udev->dev, "Failed to access otp area (%d)", err); - goto done; - } - - memcpy(data, buf, size); - -done: - kfree(buf); return err; } @@ -3652,7 +3640,7 @@ static bool btusb_qca_need_patch(struct usb_device *udev) struct qca_version ver; if (btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, - sizeof(ver)) < 0) + sizeof(ver))) return false; /* only low ROM versions need patches */ return !(le32_to_cpu(ver.rom_version) & ~0xffffU); @@ -3670,7 +3658,7 @@ static int btusb_setup_qca(struct hci_dev *hdev) err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, sizeof(ver)); - if (err < 0) + if (err) return err; ver_rom = le32_to_cpu(ver.rom_version); @@ -3693,7 +3681,7 @@ static int btusb_setup_qca(struct hci_dev *hdev) err = btusb_qca_send_vendor_req(udev, QCA_CHECK_STATUS, &status, sizeof(status)); - if (err < 0) + if (err) return err; if (!(status & QCA_PATCH_UPDATED)) { @@ -3704,7 +3692,7 @@ static int btusb_setup_qca(struct hci_dev *hdev) err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, sizeof(ver)); - if (err < 0) + if (err) return err; btdata->qca_dump.fw_version = le32_to_cpu(ver.patch_version); -- cgit v1.2.3 From abd93c85c8667add738ee82aeab95dd9fc8265a2 Mon Sep 17 00:00:00 2001 From: Aldo Ariel Panzardo Date: Sat, 25 Jul 2026 16:52:30 -0300 Subject: Bluetooth: SCO: give the socket its own sco_conn reference sco_conn_del() drops a reference it does not own. It takes one transient reference via sco_conn_hold_unless_zero() and releases it with the sco_conn_put() that follows sco_sock_hold(); the additional put in the !sk branch releases a second one: conn = sco_conn_hold_unless_zero(conn); ... sk = sco_sock_hold(conn); sco_conn_unlock(conn); sco_conn_put(conn); if (!sk) { sco_conn_put(conn); return; } When close() races the controller's Disconnection Complete, sco_chan_del() clears conn->sk and drops the socket's reference while sco_conn_del() is running. sco_conn_del() then sees sk == NULL, its own put drops the count to zero and frees the conn, and the second put writes to the freed kref: BUG: KASAN: slab-use-after-free in sco_conn_put.part.0+0x1a/0x190 Write of size 4 at addr ffff8881099dec74 by task kworker/u17:3/413 Workqueue: hci1 hci_rx_work Call Trace: sco_conn_put.part.0+0x1a/0x190 hci_disconn_complete_evt+0x1ee/0x3e0 hci_event_packet+0x54a/0x650 hci_rx_work+0x321/0x3d0 Allocated by task 413: sco_conn_add+0x72/0x1a0 sco_connect_cfm+0x88/0x670 Freed by task 413: sco_conn_del.isra.0+0x3f/0xf0 hci_disconn_complete_evt+0x1ee/0x3e0 refcount_t: underflow; use-after-free. The root cause is that the socket stores the connection without holding a reference of its own. __sco_chan_add() does: sco_pi(sk)->conn = conn; so the socket borrows whatever reference its caller happened to hold, and the callers paper over that with ad-hoc holds and puts. Give the socket a counted reference instead: __sco_chan_add() takes one and it is released together with the channel (sco_chan_del()) and in sco_sock_destruct(). With the socket holding its own reference, sco_conn_del() no longer needs the extra put and the redundant hold in sco_conn_ready() goes away. Making the socket own its reference means the connection is now actually freed on the error paths of sco_connect() where it used to leak, which in turn runs sco_conn_free() and its hci_conn_drop(conn->hcon). To keep the hci_conn accounting balanced, make that ownership explicit as well: sco_conn_add() consumes one hci_conn reference and the sco_conn owns it for its lifetime. sco_connect() hands over the reference returned by hci_connect_sco() and no longer drops it on the error paths; sco_connect_cfm(), which is not given a reference, takes one with hci_conn_hold() before handing it to sco_conn_add() (and drops it again if the allocation fails); and the explicit hci_conn_hold() in sco_conn_ready() is removed. Every reference then has a single, clear owner. Fixes: e6720779ae61 ("Bluetooth: SCO: Use kref to track lifetime of sco_conn") Cc: stable@vger.kernel.org Suggested-by: Pauli Virtanen Signed-off-by: Aldo Ariel Panzardo Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/sco.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index c05f79b7aa31..3d4362a09df4 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -188,6 +188,9 @@ static void sco_sock_clear_timer(struct sock *sk) } /* ---- SCO connections ---- */ +/* Consumes a reference on @hcon, which the returned sco_conn owns until it is + * freed. On failure (NULL return) the reference is left for the caller to drop. + */ static struct sco_conn *sco_conn_add(struct hci_conn *hcon) { struct sco_conn *conn = hcon->sco_data; @@ -198,6 +201,9 @@ static struct sco_conn *sco_conn_add(struct hci_conn *hcon) sco_conn_lock(conn); conn->hcon = hcon; sco_conn_unlock(conn); + } else { + /* conn already owns a reference on hcon */ + hci_conn_drop(hcon); } return conn; } @@ -265,10 +271,8 @@ static void sco_conn_del(struct hci_conn *hcon, int err) sco_conn_unlock(conn); sco_conn_put(conn); - if (!sk) { - sco_conn_put(conn); + if (!sk) return; - } /* Kill socket */ lock_sock(sk); @@ -283,7 +287,7 @@ static void __sco_chan_add(struct sco_conn *conn, struct sock *sk, { BT_DBG("conn %p", conn); - sco_pi(sk)->conn = conn; + sco_pi(sk)->conn = sco_conn_hold(conn); conn->sk = sk; if (parent) @@ -366,15 +370,15 @@ static int sco_connect(struct sock *sk) */ if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND) { release_sock(sk); - hci_conn_drop(hcon); + sco_conn_put(conn); err = -EBADFD; goto unlock; } err = sco_chan_add(conn, sk, NULL); + sco_conn_put(conn); if (err) { release_sock(sk); - hci_conn_drop(hcon); goto unlock; } @@ -1452,8 +1456,6 @@ static void sco_conn_ready(struct sco_conn *conn) bacpy(&sco_pi(sk)->src, &conn->hcon->src); bacpy(&sco_pi(sk)->dst, &conn->hcon->dst); - sco_conn_hold(conn); - hci_conn_hold(conn->hcon); __sco_chan_add(conn, sk, parent); if (test_bit(BT_SK_DEFER_SETUP, &bt_sk(parent)->flags)) @@ -1509,10 +1511,12 @@ static void sco_connect_cfm(struct hci_conn *hcon, __u8 status) if (!status) { struct sco_conn *conn; - conn = sco_conn_add(hcon); + conn = sco_conn_add(hci_conn_hold(hcon)); if (conn) { sco_conn_ready(conn); sco_conn_put(conn); + } else { + hci_conn_drop(hcon); } } else sco_conn_del(hcon, bt_to_errno(status)); -- cgit v1.2.3 From 98f2e9e6d6f91a6abb43f166b244b428ba85fa2b Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Fri, 17 Jul 2026 10:55:07 +0200 Subject: i2c: iproc: reset bus after timeout if START_BUSY is stuck If a transaction times out, the START_BUSY signal can stay up, and subsequent transactaction attempts will fail as the bus is still considered busy. I can easily trigger this by attempting to read from an address with no device, e.g. when running i2cdetect. After the first read times out, all subsequent read attempts return busy. To get to a working state again, the controller needs to be reset to clear the START_BUSY signal. So check for START_BUSY still asserted on a timeout, and do reset in case it is, This is also done by the original non-upstream iproc-smbus driver implementation [1]. Works around situations like: bcm-iproc-2c 1803b000.i2c: transaction timed out bcm-iproc-2c 1803b000.i2c: bus is busy bcm-iproc-2c 1803b000.i2c: bus is busy bcm-iproc-2c 1803b000.i2c: bus is busy bcm-iproc-2c 1803b000.i2c: bus is busy bcm-iproc-2c 1803b000.i2c: bus is busy ... where the bus never recovers after a timeout. [1] https://github.com/opencomputeproject/onie/blob/master/patches/kernel/3.2.69/driver-iproc-smbus.patch Fixes: e6e5dd3566e0 ("i2c: iproc: Add Broadcom iProc I2C Driver") Signed-off-by: Jonas Gorski Cc: # v4.0+ Acked-by: Ray Jui Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260717085507.34209-1-jonas.gorski@bisdn.de --- drivers/i2c/busses/i2c-bcm-iproc.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index b5629cffe99b..86ca4c2221c4 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -803,6 +803,17 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, } if (!time_left && !iproc_i2c->xfer_is_done) { + /* + * The controller may fail to clear START_BUSY after a timeout, + * reset the controller to recover in that case. + */ + if (!!(iproc_i2c_rd_reg(iproc_i2c, M_CMD_OFFSET) & + BIT(M_CMD_START_BUSY_SHIFT))) { + bcm_iproc_i2c_enable_disable(iproc_i2c, false); + bcm_iproc_i2c_init(iproc_i2c); + bcm_iproc_i2c_enable_disable(iproc_i2c, true); + } + /* flush both TX/RX FIFOs */ val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); -- cgit v1.2.3 From d64ec362c369bbc33833f7936d5f3a706b0d5c45 Mon Sep 17 00:00:00 2001 From: Liem Date: Mon, 29 Jun 2026 10:38:28 +0800 Subject: i2c: imx: Fix slave registration race and error handling In i2c_imx_reg_slave(), the slave pointer was assigned before pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed, the error path returned without clearing i2c_imx->slave, leaving it non-NULL and causing all subsequent registration attempts to fail with -EBUSY. Additionally, because this driver uses a shared IRQ, the interrupt handler i2c_imx_isr() can execute concurrently and, after acquiring slave_lock, dereference i2c_imx->slave. The previous fix attempt added a lockless i2c_imx->slave = NULL on the error path, but that could race with the ISR under the lock and still cause a NULL pointer dereference. Fix both issues by deferring the assignment of i2c_imx->slave and i2c_imx->last_slave_event to after a successful resume, and by performing the assignment inside the slave_lock critical section. This guarantees that the slave pointer is never left stale on the error path and is always valid when observed by the interrupt handler. Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver") Signed-off-by: Liem Cc: # v5.11+ Reviewed-by: Frank Li Acked-by: Carlos Song Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260629023829.152651-2-liem16213@gmail.com --- drivers/i2c/busses/i2c-imx.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index d549d630b41a..49859ee494c6 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -930,9 +930,6 @@ static int i2c_imx_reg_slave(struct i2c_client *client) if (i2c_imx->slave) return -EBUSY; - i2c_imx->slave = client; - i2c_imx->last_slave_event = I2C_SLAVE_STOP; - /* Resume */ ret = pm_runtime_resume_and_get(i2c_imx->adapter.dev.parent); if (ret < 0) { @@ -940,6 +937,11 @@ static int i2c_imx_reg_slave(struct i2c_client *client) return ret; } + scoped_guard(spinlock_irqsave, &i2c_imx->slave_lock) { + i2c_imx->slave = client; + i2c_imx->last_slave_event = I2C_SLAVE_STOP; + } + i2c_imx_slave_init(i2c_imx); return 0; -- cgit v1.2.3 From 6ac7702b6cc2b94aaed9ef2d95bfbefcdc90061f Mon Sep 17 00:00:00 2001 From: Liem Date: Mon, 29 Jun 2026 10:38:29 +0800 Subject: i2c: imx: Cancel hrtimer before clearing slave pointer In i2c_imx_unreg_slave(), the slave pointer is set to NULL after disabling interrupts. However, a pending interrupt might already have started the hrtimer (i2c_imx_slave_timeout) before the pointer was cleared. If the hrtimer fires after i2c_imx->slave is set to NULL, the timer callback i2c_imx_slave_finish_op() will call i2c_imx_slave_event() with a NULL slave pointer, which results in a use-after-free / NULL pointer dereference. Fix by canceling the hrtimer and waiting for it to complete after disabling interrupts, before clearing the slave pointer. Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver") Signed-off-by: Liem Cc: # v5.11+ Acked-by: Carlos Song Reviewed-by: Frank Li Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260629023829.152651-3-liem16213@gmail.com --- drivers/i2c/busses/i2c-imx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 49859ee494c6..9477d814fde9 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -960,6 +960,7 @@ static int i2c_imx_unreg_slave(struct i2c_client *client) i2c_imx_reset_regs(i2c_imx); + hrtimer_cancel(&i2c_imx->slave_timer); i2c_imx->slave = NULL; /* Suspend */ -- cgit v1.2.3 From b08c9857aa1f5f3a81d375d6d4bb1d8b92f22ebc Mon Sep 17 00:00:00 2001 From: Wenmeng Liu Date: Thu, 25 Jun 2026 17:42:45 +0800 Subject: i2c: qcom-cci: drop custom suspend/resume and rely on runtime PM helpers cci_resume() unconditionally calls cci_resume_runtime() regardless of the runtime PM state. If the device is already runtime-suspended before system suspend, the clock is re-enabled while runtime_status remains RPM_SUSPENDED. As a result, pm_request_autosuspend() does not arm the timer, leaving the clock permanently enabled. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Signed-off-by: Wenmeng Liu Cc: # v5.8+ Reviewed-by: Vladimir Zapolskiy Reviewed-by: Konrad Dybcio Reviewed-by: Loic Poulain Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260625-cci-v1-1-a100cda673ce@oss.qualcomm.com --- drivers/i2c/busses/i2c-qcom-cci.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c index 4d64895a9e9e..bdeda3979c48 100644 --- a/drivers/i2c/busses/i2c-qcom-cci.c +++ b/drivers/i2c/busses/i2c-qcom-cci.c @@ -492,24 +492,8 @@ static int __maybe_unused cci_resume_runtime(struct device *dev) return 0; } -static int __maybe_unused cci_suspend(struct device *dev) -{ - if (!pm_runtime_suspended(dev)) - return cci_suspend_runtime(dev); - - return 0; -} - -static int __maybe_unused cci_resume(struct device *dev) -{ - cci_resume_runtime(dev); - pm_request_autosuspend(dev); - - return 0; -} - static const struct dev_pm_ops qcom_cci_pm = { - SET_SYSTEM_SLEEP_PM_OPS(cci_suspend, cci_resume) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) SET_RUNTIME_PM_OPS(cci_suspend_runtime, cci_resume_runtime, NULL) }; -- cgit v1.2.3 From a8c171c107c0b61a5e7e10cedab0fb72aeaf640d Mon Sep 17 00:00:00 2001 From: Mauricio Faria de Oliveira Date: Thu, 23 Jul 2026 20:08:04 -0300 Subject: x86/boot: Add volatile, clobbers and zero-length test in memcmp() Add the volatile qualifier and clobbers parameter to prevent bugs with instruction reordering and optimization. Also add TEST for the zero-length case to set ZF, as, if the count register is zero, the REPE prefix does not run the CMPSB instruction, leaving the ZF flag undetermined. [ bp: Add a comment about the len==0 case. ] Fixes: 62bd0337d0c4 ("Top header file for new x86 setup code") Closes: https://sashiko.dev/#/patchset/20260701-pvh-kasan-inline-v6-0-ba99045dfa9f%40igalia.com Suggested-by: Borislav Petkov Signed-off-by: Mauricio Faria de Oliveira Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/all/20260721-pvh-kasan-inline-v7-2-38979a50cef0@igalia.com --- arch/x86/boot/string.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c index ac0f900ebc47..1632d40e1f54 100644 --- a/arch/x86/boot/string.c +++ b/arch/x86/boot/string.c @@ -32,8 +32,15 @@ int memcmp(const void *s1, const void *s2, size_t len) { bool diff; - asm("repe cmpsb" - : "=@ccnz" (diff), "+D" (s1), "+S" (s2), "+c" (len)); + + /* + * Make sure ZF is properly set in the len==0 case because in it, + * RCX==0 and the REPE; CMPSB won't get executed. + */ + asm volatile("test %3, %3\n\t" + "repe cmpsb" + : "=@ccnz" (diff), "+D" (s1), "+S" (s2), "+c" (len) + : : "cc", "memory"); return diff; } -- cgit v1.2.3 From 35699ae99deabdb9100c2e6b5365c996712846e7 Mon Sep 17 00:00:00 2001 From: Suresh Guttula Date: Tue, 14 Jul 2026 20:20:39 +0530 Subject: drm/amdgpu : update mmhub eco sec lvl for vcn5_3 This patch requests PSP to set the sec lvl for vcn and jpeg. Signed-off-by: Suresh Guttula Reviewed-by: McRae Geoffrey Acked-by: Alex Deucher Signed-off-by: Alex Deucher (cherry picked from commit 4c8b8472f85a730a6853ab68474f210143f42b5a) --- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 27 +++++++++++++++++++++++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h | 1 + drivers/gpu/drm/amd/amdgpu/jpeg_v5_3_0.c | 24 ++++++++++++++++++++++++ drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h | 1 + drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c | 26 ++++++++++++++++++++++++++ 5 files changed, 79 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c index e0c0d7872e45..ca80b6194cac 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c @@ -1222,6 +1222,33 @@ int psp_memory_partition(struct psp_context *psp, int mode) return ret; } +int psp_set_mmhub_eco_sec_level(struct amdgpu_device *adev) +{ + int ret; + struct psp_context *psp = &adev->psp; + struct psp_gfx_cmd_resp *cmd = acquire_psp_cmd_buf(psp); + + cmd->cmd_id = GFX_CMD_ID_SET_MMHUB_ECO_SEC_LEVEL; + + ret = psp_cmd_submit_buf(psp, NULL, cmd, psp->fence_buf_mc_addr); + if (ret) { + dev_err(psp->adev->dev, + "PSP request failed to set mmuhub eco sec level with ret=%d\n", ret); + release_psp_cmd_buf(psp); + return ret; + } + + if (cmd->resp.status) { + dev_err(psp->adev->dev, + "MMHUB ECO SEC LEVEL command 0x%x failed, PSP response status: 0x%X\n", + cmd->cmd_id, cmd->resp.status); + ret = -EIO; + } + release_psp_cmd_buf(psp); + + return ret; +} + static int psp_ptl_fmt_verify(struct psp_context *psp, enum amdgpu_ptl_fmt fmt, uint32_t *ptl_fmt) { diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h index 2d838b1b2b11..3d7744d60fac 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h @@ -656,5 +656,6 @@ int amdgpu_psp_reg_program_no_ring(struct psp_context *psp, uint32_t val, void amdgpu_psp_debugfs_init(struct amdgpu_device *adev); int amdgpu_psp_get_fw_type(struct amdgpu_firmware_info *ucode, enum psp_gfx_fw_type *type); +int psp_set_mmhub_eco_sec_level(struct amdgpu_device *adev); #endif diff --git a/drivers/gpu/drm/amd/amdgpu/jpeg_v5_3_0.c b/drivers/gpu/drm/amd/amdgpu/jpeg_v5_3_0.c index e7546816baba..2c3e6d9f52a6 100644 --- a/drivers/gpu/drm/amd/amdgpu/jpeg_v5_3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v5_3_0.c @@ -398,6 +398,25 @@ static void jpeg_v5_3_0_stop_dpg_mode(struct amdgpu_device *adev, int inst_idx) WREG32_SOC15(JPEG, inst_idx, regUVD_JPEG_POWER_STATUS, reg_data); } +/** + * jpeg_v5_3_0_set_mmhub_eco_sec_level - set jpeg sec lvl reg + * + * @adev: amdgpu_device pointer + * + * request psp to set secure lvl + */ +static int jpeg_v5_3_0_set_mmhub_eco_sec_level(struct amdgpu_device *adev) +{ + int r = 0; + + if (adev->firmware.load_type == AMDGPU_FW_LOAD_PSP) { + /* Request to PSP to program JPEG secure lvl */ + r = psp_set_mmhub_eco_sec_level(adev); + } + + return r; +} + /** * jpeg_v5_3_0_start - start JPEG block * @@ -423,6 +442,11 @@ static int jpeg_v5_3_0_start(struct amdgpu_device *adev) if (r) return r; + /* program JPEG secure lvl register */ + r = jpeg_v5_3_0_set_mmhub_eco_sec_level(adev); + if (r) + return r; + /* JPEG disable CGC */ jpeg_v5_3_0_disable_clock_gating(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h b/drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h index ac34bac3c839..ad618b78685f 100644 --- a/drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h +++ b/drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h @@ -110,6 +110,7 @@ enum psp_gfx_cmd_id GFX_CMD_ID_PERF_HW = 0x0000004C, /* performance monitor */ GFX_CMD_ID_FB_FW_RESERV_ADDR = 0x00000050, /* Query FW reservation addr */ GFX_CMD_ID_FB_FW_RESERV_EXT_ADDR = 0x00000051, /* Query FW reservation extended addr */ + GFX_CMD_ID_SET_MMHUB_ECO_SEC_LEVEL = 0x0000005D, /* Set MMHUB ECO sec lvls on VCN block */ }; /* PSP boot config sub-commands */ diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c index 45580e9c4e0c..886e2c2074a9 100644 --- a/drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c @@ -795,6 +795,27 @@ static int vcn_v5_0_0_start_dpg_mode(struct amdgpu_vcn_inst *vinst, return 0; } +/** + * vcn_v5_0_0_set_mmhub_eco_sec_level - set vcn sec lvl reg + * + * @adev: amdgpu_device pointer + * + * request psp to set sec lvl + */ +static int vcn_v5_0_0_set_mmhub_eco_sec_level(struct amdgpu_device *adev) +{ + int r = 0; + + if (amdgpu_ip_version(adev, VCN_HWIP, 0) == IP_VERSION(5, 3, 0)) { + if (adev->firmware.load_type == AMDGPU_FW_LOAD_PSP) { + /* Request to PSP to program VCN secure lvl */ + r = psp_set_mmhub_eco_sec_level(adev); + } + } + + return r; +} + /** * vcn_v5_0_0_start - VCN start * @@ -819,6 +840,11 @@ static int vcn_v5_0_0_start(struct amdgpu_vcn_inst *vinst) fw_shared = adev->vcn.inst[i].fw_shared.cpu_addr; + /* program VCN secure lvl register */ + r = vcn_v5_0_0_set_mmhub_eco_sec_level(adev); + if (r) + return r; + if (adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG) return vcn_v5_0_0_start_dpg_mode(vinst, adev->vcn.inst[i].indirect_sram); -- cgit v1.2.3 From 6e7566ba4739dd573c331adde1c96690f7a567bd Mon Sep 17 00:00:00 2001 From: William Palacek Date: Mon, 6 Jul 2026 10:25:58 -0400 Subject: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. Signed-off-by: William Palacek Reviewed-by: Alysa Liu Signed-off-by: Alex Deucher (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_crat.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c index 2a239f45fc24..6e0df685503d 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c @@ -1412,6 +1412,15 @@ int kfd_parse_crat_table(void *crat_image, struct list_head *device_list, break; } + /* Validate subtype fits within remaining image */ + if ((char *)sub_type_hdr + sub_type_hdr->length > + (char *)crat_image + image_len) { + pr_warn("CRAT subtype length %u exceeds image bounds\n", + sub_type_hdr->length); + ret = -EINVAL; + break; + } + if (sub_type_hdr->flags & CRAT_SUBTYPE_FLAGS_ENABLED) { ret = kfd_parse_subtype(sub_type_hdr, device_list); if (ret) -- cgit v1.2.3 From 17da8410554906a95bb9ef30acbdf0c5abc1a4ef Mon Sep 17 00:00:00 2001 From: Sunil Khatri Date: Wed, 15 Jul 2026 19:32:56 +0530 Subject: drm/amdgpu: dont pin wptr bo instead use eviction fence MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of pinning the wptr bo attach the eviction fence to the bo to make sure it remains valid all the time. Signed-off-by: Sunil Khatri Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 7264bc10c7c657a54603c7fc058bf8e15f18ce12) --- drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c | 19 +++++++++++++++++++ drivers/gpu/drm/amd/amdgpu/mes_userqueue.c | 17 +++++------------ 2 files changed, 24 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c index 572f2949cb64..3efe1ae27386 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c @@ -965,6 +965,7 @@ amdgpu_userq_vm_validate(struct amdgpu_userq_mgr *uq_mgr) struct amdgpu_vm *vm = &fpriv->vm; unsigned long key, tmp_key; struct amdgpu_bo_va *bo_va; + struct amdgpu_usermode_queue *queue; struct amdgpu_bo *bo; struct drm_exec exec; struct xarray xa; @@ -1080,6 +1081,24 @@ retry_lock: dma_fence_wait(bo_va->last_pt_update, false); dma_fence_wait(vm->last_update, false); + xa_for_each(&uq_mgr->userq_xa, tmp_key, queue) { + bo = queue->wptr_obj.obj; + if (!bo) { + ret = -EINVAL; + goto unlock_all; + } + + ret = amdgpu_ttm_alloc_gart(&bo->tbo); + if (unlikely(ret)) { + drm_file_err(uq_mgr->file, + "failed to bind wptr bo to gart on resume, qid=%lu ret=%d\n", + tmp_key, ret); + goto unlock_all; + } + + queue->wptr_obj.gpu_addr = amdgpu_bo_gpu_offset(bo); + } + ret = amdgpu_evf_mgr_rearm(&fpriv->evf_mgr, &exec); if (ret) drm_file_err(uq_mgr->file, "Failed to replace eviction fence\n"); diff --git a/drivers/gpu/drm/amd/amdgpu/mes_userqueue.c b/drivers/gpu/drm/amd/amdgpu/mes_userqueue.c index 16625c31bfd3..4e44a581a78a 100644 --- a/drivers/gpu/drm/amd/amdgpu/mes_userqueue.c +++ b/drivers/gpu/drm/amd/amdgpu/mes_userqueue.c @@ -70,27 +70,23 @@ mes_userq_create_wptr_mapping(struct amdgpu_device *adev, ret = -EINVAL; goto fail_map; } - - /* TODO use eviction fence instead of pinning. */ - ret = amdgpu_bo_pin(wptr_obj->obj, AMDGPU_GEM_DOMAIN_GTT); + /* Keep WPTR BO under eviction-fence control instead of pinning. */ + ret = amdgpu_evf_mgr_attach_fence(&uq_mgr_to_fpriv(uq_mgr)->evf_mgr, wptr_obj->obj); if (ret) { - DRM_ERROR("Failed to pin wptr bo. ret %d\n", ret); + DRM_ERROR("Failed to attach eviction fence to wptr bo. ret %d\n", ret); goto fail_map; } ret = amdgpu_ttm_alloc_gart(&wptr_obj->obj->tbo); if (ret) { - DRM_ERROR("Failed to bind bo to GART. ret %d\n", ret); - goto fail_alloc_gart; + DRM_ERROR("Failed to bind wptr bo to GART. ret %d\n", ret); + goto fail_map; } queue->wptr_obj.gpu_addr = amdgpu_bo_gpu_offset(wptr_obj->obj); drm_exec_fini(&exec); return 0; - -fail_alloc_gart: - amdgpu_bo_unpin(wptr_obj->obj); fail_map: amdgpu_bo_unref(&wptr_obj->obj); fail_lock: @@ -468,9 +464,6 @@ static void mes_userq_mqd_destroy(struct amdgpu_usermode_queue *queue) amdgpu_bo_free_kernel(&queue->mqd.obj, &queue->mqd.gpu_addr, &queue->mqd.cpu_ptr); - amdgpu_bo_reserve(queue->wptr_obj.obj, true); - amdgpu_bo_unpin(queue->wptr_obj.obj); - amdgpu_bo_unreserve(queue->wptr_obj.obj); amdgpu_bo_unref(&queue->wptr_obj.obj); } -- cgit v1.2.3 From e3a721753f60c1d4643a729eaf5a8976d285fa0f Mon Sep 17 00:00:00 2001 From: Bob Zhou Date: Thu, 16 Jul 2026 10:44:36 +0800 Subject: drm/amdgpu: skip clearing empty freed VM list on GEM close amdgpu_vm_clear_freed() allocates an amdgpu_sync object and walks the VM reservation fences via amdgpu_sync_resv() before checking whether vm->freed has anything to clear. Return early when the list is empty to skip this overhead on a hot path (every GEM close and command submission). Signed-off-by: Bob Zhou Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher (cherry picked from commit 8ba869e852d4f1b1c0e5ae9225c77f7ceccbe056) --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index f224d33c4bc4..dc6a9d7dd0b2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1553,6 +1553,8 @@ int amdgpu_vm_clear_freed(struct amdgpu_device *adev, struct amdgpu_sync sync; int r; + if (list_empty(&vm->freed)) + return 0; /* * Implicitly sync to command submissions in the same VM before -- cgit v1.2.3 From c216b39fbbc4b007fd6984cffd85039d49a55154 Mon Sep 17 00:00:00 2001 From: Ray Wu Date: Fri, 3 Jul 2026 09:14:49 +0800 Subject: drm/amd/display: Increase HDMI AV mute wait from 2 to 3 frames Some HDMI sinks need additional GCP packets to properly process the mute state before the timing generator is disabled, especially after link re-establishment with HDMI 2.0 scrambling enabled. Waiting for only 2 frames is insufficient for certain monitor firmware, resulting in garbled display output on resume from suspend. Increase the AV mute wait in dcn30_set_avmute() from 2 to 3 frames to ensure the sink receives enough GCP packets. Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167 Assisted-by: Cursor:Claude-Opus-4.6 Reviewed-by: Wayne Lin Signed-off-by: Ray Wu Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 0c0d5174b09640d8b560764aa5a177630e076e93) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c index a7c85a2302ab..2d3587a31bc8 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c @@ -847,13 +847,19 @@ void dcn30_set_avmute(struct pipe_ctx *pipe_ctx, bool enable) pipe_ctx->stream_res.stream_enc, enable); - /* Wait for two frame to make sure AV mute is sent out */ + /* Wait for three frames to make sure AV mute is sent out. + * Some HDMI sinks need additional GCP packets to properly + * process the mute state, especially after link re-establishment + * with HDMI 2.0 scrambling enabled. + */ if (enable && pipe_ctx->stream_res.tg->funcs->is_tg_enabled(pipe_ctx->stream_res.tg)) { + int i; + pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); - pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VBLANK); - pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); - pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VBLANK); - pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); + for (i = 0; i < 3; i++) { + pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VBLANK); + pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); + } } } } -- cgit v1.2.3 From 38b73293f38658a4685ffcea666462024f858ad9 Mon Sep 17 00:00:00 2001 From: Vladimir Marioukhine Date: Mon, 20 Jul 2026 11:53:30 -0400 Subject: drm/amdkfd: fix QID bit leak in pqm_create_queue() When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during the first queue creation for a process, pqm_create_queue() returns early via 'return retval' without going through the err_create_queue cleanup label. This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called, leaving the reserved QID bit permanently set in queue_slot_bitmap. Over time this leaks QID slots, potentially exhausting all available queue slots. Fix this by replacing 'return retval' with 'goto err_allocate_pqn' so that clear_bit() is always called on the error path without touching the uninitialized pqn pointer. AILIKFD-813 Reported-by: Deucher, Alexander Signed-off-by: Vladimir Marioukhine Reviewed-by: Kent Russell Signed-off-by: Alex Deucher (cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c index 9ccbc6e5b27b..503176f00204 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c @@ -383,7 +383,7 @@ int pqm_create_queue(struct process_queue_manager *pqm, false); if (retval) { dev_err(dev->adev->dev, "failed to allocate process context bo\n"); - return retval; + goto err_allocate_pqn; } memset(pdd->proc_ctx_cpu_ptr, 0, AMDGPU_MES_PROC_CTX_SIZE); } -- cgit v1.2.3 From 3cbb92ca935f964f6d415cd1c0ac91d061aafa63 Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Thu, 9 Jul 2026 16:33:11 -0600 Subject: drm/amdgpu: Fix __rcu fence pointer accesses MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building for ARCH=um with W=1 C=1 makes sparse report "incompatible types in comparison expression (different address spaces)" warnings in the KFD code, exposed after UML builds were enabled: - amdgpu_amdkfd_fence.c compares the __rcu-annotated dma_fence.ops pointer directly in to_amdgpu_amdkfd_fence(). - amdgpu_amdkfd_gpuvm.c compares the __rcu eviction fence pointer directly in amdgpu_amdkfd_gpuvm_restore_process_bos(). Fixes: af3f2f5db265 ("drm/amdgpu: Remove UML build exclusion from Kconfig") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202607091659.SHEscT0c-lkp@intel.com/ Cc: Harry Wentland Assisted-by: Copilot:Claude-Opus-4.8 Signed-off-by: Alex Hung Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 764f241ad227bb942e5b0b8b4d9898f1a4175605) --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c index 6a364357522b..b0299d861903 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c @@ -92,7 +92,7 @@ struct amdgpu_amdkfd_fence *to_amdgpu_amdkfd_fence(struct dma_fence *f) return NULL; fence = container_of(f, struct amdgpu_amdkfd_fence, base); - if (f->ops == &amdkfd_fence_ops) + if (rcu_access_pointer(f->ops) == &amdkfd_fence_ops) return fence; return NULL; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c index 35fe2c974699..f0f516a79424 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c @@ -3096,7 +3096,7 @@ int amdgpu_amdkfd_gpuvm_restore_process_bos(void *info, struct dma_fence __rcu * process_info->eviction_fence = new_fence; replace_eviction_fence(ef, dma_fence_get(&new_fence->base)); } else { - WARN_ONCE(*ef != &process_info->eviction_fence->base, + WARN_ONCE(rcu_access_pointer(*ef) != &process_info->eviction_fence->base, "KFD eviction fence doesn't match KGD process_info"); } -- cgit v1.2.3 From 43c9f7cba9f9fcd09a5e23686ab4f0f67b62d888 Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Thu, 9 Jul 2026 16:33:12 -0600 Subject: drm/amdgpu: Pack nested ucode_info struct Building for ARCH=um with W=1 C=1 makes the "amd_sriov_msg_vf2pf_info must be 1 KB" static assertion in amdgv_sriovmsg.h fail under sparse, exposed after UML builds were enabled. Sparse does not honor #pragma pack(push, 1) for the nested ucode_info struct, so it sizes each element as 8 bytes instead of 5 and computes the surrounding structure as larger than 1 KB. The compilers get this right via the enclosing pragma, but the annotation should be explicit. Fixes: af3f2f5db265 ("drm/amdgpu: Remove UML build exclusion from Kconfig") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202607091659.SHEscT0c-lkp@intel.com/ Cc: Harry Wentland Assisted-by: Copilot:Claude-Opus-4.8 Signed-off-by: Alex Hung Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher (cherry picked from commit 1d8cfeb69daa863a70134b8ed6df8055c418a5b0) --- drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h b/drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h index d80f01c0e754..b02561f41b58 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h @@ -379,7 +379,7 @@ struct amd_sriov_msg_vf2pf_info { struct { uint8_t id; uint32_t version; - } ucode_info[AMD_SRIOV_MSG_RESERVE_UCODE]; + } __packed ucode_info[AMD_SRIOV_MSG_RESERVE_UCODE]; uint64_t dummy_page_addr; /* FB allocated for guest MES to record UQ info */ uint64_t mes_info_addr; -- cgit v1.2.3 From 0ebf413b444ba22a6422f750c48509d4e91f8555 Mon Sep 17 00:00:00 2001 From: Fares Soliman Date: Mon, 13 Jul 2026 09:18:41 -0400 Subject: drm/amdgpu: Update message IDs to PMFW to correctly gather GFXOFF residency logs Updates PPSMC_MSGs and set/get functions for gathering GFXOFF logs on Van Gogh. Logs are now gathered live rather than starting then stopping logging and reading an average value afterwards. This is in accordance to changes made in PMFW. In regards to messageID 0x52, the old interface uses a start/stop parameter, and the new one doesn't. The firmware is checked to determine which method to use. v2: added firmware guard to new interface, old interface kept as fallback Signed-off-by: Fares Soliman Acked-by: Alex Deucher Signed-off-by: Alex Deucher (cherry picked from commit 482e2cadea8c34ae4e733f269a640d6b04fc9262) --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 4 +- drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h | 2 +- .../drm/amd/pm/swsmu/inc/pmfw_if/smu_v11_5_ppsmc.h | 6 ++- drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h | 4 +- drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c | 50 +++++++++++++++++----- 5 files changed, 50 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 389bad724273..662ec01961f4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -1319,8 +1319,8 @@ err: * @size: Number of bytes to read * @pos: Offset to seek to * - * Read the last residency value logged. It doesn't auto update, one needs to - * stop logging before getting the current value. + * Read a live GFXOFF residency sample from firmware. One needs to start logging + * before getting the current value. */ static ssize_t amdgpu_debugfs_gfxoff_residency_read(struct file *f, char __user *buf, size_t size, loff_t *pos) diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h index e3a89e9a9df4..64a64973fb86 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h @@ -1348,7 +1348,7 @@ struct pptable_funcs { u32 (*set_gfx_off_residency)(struct smu_context *smu, bool start); /** - * @get_gfx_off_residency: Average GFXOFF residency % during the logging interval + * @get_gfx_off_residency: Live GFXOFF residency percentage */ u32 (*get_gfx_off_residency)(struct smu_context *smu, uint32_t *residency); diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v11_5_ppsmc.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v11_5_ppsmc.h index 7471e2df2828..4206514765cd 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v11_5_ppsmc.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v11_5_ppsmc.h @@ -110,8 +110,10 @@ #define PPSMC_MSG_GetSlowPPTLimit 0x4C #define PPSMC_MSG_GetGfxOffStatus 0x50 #define PPSMC_MSG_GetGfxOffEntryCount 0x51 -#define PPSMC_MSG_LogGfxOffResidency 0x52 -#define PPSMC_Message_Count 0x53 +#define PPSMC_MSG_GfxOffResidencyLogReadSample 0x52 +#define PPSMC_MSG_StopGfxOffResidencyLogging 0x53 +#define PPSMC_MSG_StartGfxOffResidencyLogging 0x56 +#define PPSMC_Message_Count 0x57 //Argument for PPSMC_MSG_GfxDeviceDriverReset enum { diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h index 636ff90923d9..acf03838d49d 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h @@ -252,7 +252,9 @@ __SMU_DUMMY_MAP(DriverMode2Reset), \ __SMU_DUMMY_MAP(GetGfxOffStatus), \ __SMU_DUMMY_MAP(GetGfxOffEntryCount), \ - __SMU_DUMMY_MAP(LogGfxOffResidency), \ + __SMU_DUMMY_MAP(StartGfxOffResidencyLogging), \ + __SMU_DUMMY_MAP(GfxOffResidencyLogReadSample), \ + __SMU_DUMMY_MAP(StopGfxOffResidencyLogging), \ __SMU_DUMMY_MAP(SetNumBadMemoryPagesRetired), \ __SMU_DUMMY_MAP(SetBadMemoryPagesRetiredFlagsPerChannel), \ __SMU_DUMMY_MAP(AllowGpo), \ diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c index 016a5c893fee..c54675b00a96 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c @@ -72,6 +72,12 @@ static const struct smu_feature_bits vangogh_dpm_features = { } }; +/* + * SMU support new GFXOFF residency log interface since version 4.63.62.00, + * use this to get live readings of GFXOFF residency + */ +#define SUPPORT_LIVE_RESIDENCY_MSG_VERSION 0x043f3e00 + static struct cmn2asic_msg_mapping vangogh_message_map[SMU_MSG_MAX_COUNT] = { MSG_MAP(TestMessage, PPSMC_MSG_TestMessage, 0), MSG_MAP(GetSmuVersion, PPSMC_MSG_GetSmuVersion, 0), @@ -142,7 +148,9 @@ static struct cmn2asic_msg_mapping vangogh_message_map[SMU_MSG_MAX_COUNT] = { MSG_MAP(GetSlowPPTLimit, PPSMC_MSG_GetSlowPPTLimit, 0), MSG_MAP(GetGfxOffStatus, PPSMC_MSG_GetGfxOffStatus, 0), MSG_MAP(GetGfxOffEntryCount, PPSMC_MSG_GetGfxOffEntryCount, 0), - MSG_MAP(LogGfxOffResidency, PPSMC_MSG_LogGfxOffResidency, 0), + MSG_MAP(StartGfxOffResidencyLogging, PPSMC_MSG_StartGfxOffResidencyLogging, 0), + MSG_MAP(GfxOffResidencyLogReadSample, PPSMC_MSG_GfxOffResidencyLogReadSample, 0), + MSG_MAP(StopGfxOffResidencyLogging, PPSMC_MSG_StopGfxOffResidencyLogging, 0), }; static struct cmn2asic_mapping vangogh_feature_mask_map[SMU_FEATURE_COUNT] = { @@ -2449,19 +2457,32 @@ static int vangogh_set_power_limit(struct smu_context *smu, static u32 vangogh_set_gfxoff_residency(struct smu_context *smu, bool start) { int ret = 0; - u32 residency; struct amdgpu_device *adev = smu->adev; if (!(adev->pm.pp_feature & PP_GFXOFF_MASK)) return 0; - ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_LogGfxOffResidency, - start, &residency); - if (ret) - return ret; + if (smu->smc_fw_version < SUPPORT_LIVE_RESIDENCY_MSG_VERSION) { + u32 residency; + + ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_GfxOffResidencyLogReadSample, + start, &residency); + if (ret) + return ret; - if (!start) - adev->gfx.gfx_off_residency = residency; + if (!start) + adev->gfx.gfx_off_residency = residency; + } else { + if (start) { + ret = smu_cmn_send_smc_msg(smu, SMU_MSG_StartGfxOffResidencyLogging, NULL); + if (ret) + return ret; + } else { + ret = smu_cmn_send_smc_msg(smu, SMU_MSG_StopGfxOffResidencyLogging, NULL); + if (ret) + return ret; + } + } return ret; } @@ -2478,11 +2499,20 @@ static u32 vangogh_set_gfxoff_residency(struct smu_context *smu, bool start) */ static u32 vangogh_get_gfxoff_residency(struct smu_context *smu, uint32_t *residency) { + int ret = 0; struct amdgpu_device *adev = smu->adev; - *residency = adev->gfx.gfx_off_residency; + if (!(adev->pm.pp_feature & PP_GFXOFF_MASK)) + return 0; + + if (smu->smc_fw_version < SUPPORT_LIVE_RESIDENCY_MSG_VERSION) { + *residency = adev->gfx.gfx_off_residency; + } else { + ret = smu_cmn_send_smc_msg(smu, SMU_MSG_GfxOffResidencyLogReadSample, + residency); + } - return 0; + return ret; } /** -- cgit v1.2.3 From a9cdc85839e4fe2c760aa4ca6cc341c31ad1918a Mon Sep 17 00:00:00 2001 From: David Francis Date: Tue, 21 Jul 2026 09:30:07 -0400 Subject: drm/amdkfd: Handle invalid event type in CRIU event restore In kfd_criu_restore_event, there was no handling for the event priv data having an invalid event type. The priv data here is untrusted and can be invalid. In that case, fail with EINVAL. Signed-off-by: David Francis Reviewed-by: Kent Russell Signed-off-by: Alex Deucher (cherry picked from commit 2e8e9963cd5c41aa14fd5316bf9ec92e7a0e3097) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_events.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_events.c b/drivers/gpu/drm/amd/amdkfd/kfd_events.c index 2e97da597b3d..78abfc0f7780 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_events.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_events.c @@ -524,6 +524,9 @@ int kfd_criu_restore_event(struct file *devkfd, ret = create_other_event(p, ev, &ev_priv->event_id); break; + default: + ret = -EINVAL; + break; } mutex_unlock(&p->event_mutex); -- cgit v1.2.3 From 119b828afb87d6a0b2b4235fafb28b3bd2da9fa0 Mon Sep 17 00:00:00 2001 From: Kanala Ramalingeswara Reddy Date: Thu, 16 Jul 2026 22:25:52 +0530 Subject: drm/amdgpu: Update driver if header for SMU V15.0.5 Update smu v15.0.0 driver if header to be v15.0.5 compatible. Signed-off-by: Kanala Ramalingeswara Reddy Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Alex Deucher (cherry picked from commit 3ee6561f8ae0ae3c80d04429361a6e06589693fc) --- .../pm/swsmu/inc/pmfw_if/smu15_driver_if_v15_0_0.h | 38 ++++ drivers/gpu/drm/amd/pm/swsmu/inc/smu_v15_0.h | 2 +- .../gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c | 220 ++++++++++++++++++++- 3 files changed, 253 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu15_driver_if_v15_0_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu15_driver_if_v15_0_0.h index 47ddf533b08f..a5d3e8d88860 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu15_driver_if_v15_0_0.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu15_driver_if_v15_0_0.h @@ -144,6 +144,44 @@ typedef struct { uint32_t MaxGfxClk; } DpmClocks_t; +//Freq in MHz +//Voltage in milli volts with 2 fractional bits +typedef struct { + uint32_t DcfClocks[NUM_DCFCLK_DPM_LEVELS]; + uint32_t DispClocks[NUM_DISPCLK_DPM_LEVELS]; + uint32_t DppClocks[NUM_DPPCLK_DPM_LEVELS]; + uint32_t SocClocks[NUM_SOCCLK_DPM_LEVELS]; + + uint32_t VPEClocks[NUM_VPE_DPM_LEVELS]; + uint32_t FclkClocks_Freq[NUM_FCLK_DPM_LEVELS]; + uint32_t FclkClocks_Voltage[NUM_FCLK_DPM_LEVELS]; + uint32_t SocVoltage[NUM_SOC_VOLTAGE_LEVELS]; + MemPstateTable_t MemPstateTable[NUM_MEM_PSTATE_LEVELS]; + + uint8_t NumDcfClkLevelsEnabled; + uint8_t NumDispClkLevelsEnabled; //Applies to both Dispclk and Dppclk + uint8_t NumSocClkLevelsEnabled; + + uint8_t VpeClkLevelsEnabled; + + uint8_t NumMemPstatesEnabled; + uint8_t NumFclkLevelsEnabled; + uint8_t Spare1; + uint8_t Spare2; + + uint8_t Spare3; + uint8_t Spare4; + uint8_t Spare5[2]; + + uint32_t MinGfxClk; + uint32_t MaxGfxClk; + + uint32_t Spare6[8]; + uint32_t Spare7[8]; + uint32_t Spare8[8]; + uint32_t Spare9[8]; +} DpmClocks_t_v15_0_5; + typedef struct { uint16_t CoreFrequency[16]; //Target core frequency [MHz] uint16_t CorePower[16]; //CAC calculated core power [mW] diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v15_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v15_0.h index e6fd8be2cc4a..0fa32fd041da 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v15_0.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v15_0.h @@ -26,7 +26,7 @@ #include "amdgpu_smu.h" #define SMU15_DRIVER_IF_VERSION_INV 0xFFFFFFFF -#define SMU15_DRIVER_IF_VERSION_SMU_V15_0 0x7 +#define SMU15_DRIVER_IF_VERSION_SMU_V15_0 0x9 #define FEATURE_MASK(feature) (1ULL << feature) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c index bb8d09e73c7d..faa7d661f3bf 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c @@ -168,7 +168,7 @@ static int smu_v15_0_0_init_smc_tables(struct smu_context *smu) SMU_TABLE_INIT(tables, SMU_TABLE_WATERMARKS, sizeof(Watermarks_t), PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); - SMU_TABLE_INIT(tables, SMU_TABLE_DPMCLOCKS, sizeof(DpmClocks_t), + SMU_TABLE_INIT(tables, SMU_TABLE_DPMCLOCKS, sizeof(DpmClocks_t_v15_0_5), PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); SMU_TABLE_INIT(tables, SMU_TABLE_SMU_METRICS, sizeof(SmuMetrics_t), PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); @@ -178,7 +178,7 @@ static int smu_v15_0_0_init_smc_tables(struct smu_context *smu) goto err0_out; smu_table->metrics_time = 0; - smu_table->clocks_table = kzalloc_obj(DpmClocks_t); + smu_table->clocks_table = kzalloc_obj(DpmClocks_t_v15_0_5); if (!smu_table->clocks_table) goto err1_out; @@ -752,11 +752,48 @@ static int smu_v15_0_0_get_dpm_freq_by_index(struct smu_context *smu, return 0; } +static int smu_v15_0_5_get_dpm_freq_by_index(struct smu_context *smu, + enum smu_clk_type clk_type, + uint32_t dpm_level, + uint32_t *freq) +{ + DpmClocks_t_v15_0_5 *clk_table = smu->smu_table.clocks_table; + + if (!clk_table || clk_type >= SMU_CLK_COUNT) + return -EINVAL; + + switch (clk_type) { + case SMU_SOCCLK: + if (dpm_level >= clk_table->NumSocClkLevelsEnabled) + return -EINVAL; + *freq = clk_table->SocClocks[dpm_level]; + break; + case SMU_UCLK: + case SMU_MCLK: + if (dpm_level >= clk_table->NumMemPstatesEnabled) + return -EINVAL; + *freq = clk_table->MemPstateTable[dpm_level].MemClk; + break; + case SMU_FCLK: + if (dpm_level >= clk_table->NumFclkLevelsEnabled) + return -EINVAL; + *freq = clk_table->FclkClocks_Freq[dpm_level]; + break; + default: + return -EINVAL; + } + + return 0; +} + static int smu_v15_0_common_get_dpm_freq_by_index(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t dpm_level, uint32_t *freq) { + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(15, 0, 5)) + smu_v15_0_5_get_dpm_freq_by_index(smu, clk_type, dpm_level, freq); + else smu_v15_0_0_get_dpm_freq_by_index(smu, clk_type, dpm_level, freq); return 0; @@ -907,12 +944,116 @@ failed: return ret; } +static int smu_v15_0_5_get_dpm_ultimate_freq(struct smu_context *smu, + enum smu_clk_type clk_type, + uint32_t *min, + uint32_t *max) +{ + DpmClocks_t_v15_0_5 *clk_table = smu->smu_table.clocks_table; + uint32_t clock_limit; + uint32_t max_dpm_level, min_dpm_level; + int ret = 0; + + if (!smu_v15_0_0_clk_dpm_is_enabled(smu, clk_type)) { + switch (clk_type) { + case SMU_MCLK: + case SMU_UCLK: + clock_limit = smu->smu_table.boot_values.uclk; + break; + case SMU_FCLK: + clock_limit = smu->smu_table.boot_values.fclk; + break; + case SMU_GFXCLK: + case SMU_SCLK: + clock_limit = smu->smu_table.boot_values.gfxclk; + break; + case SMU_SOCCLK: + clock_limit = smu->smu_table.boot_values.socclk; + break; + default: + clock_limit = 0; + break; + } + + /* clock in Mhz unit */ + if (min) + *min = clock_limit / 100; + if (max) + *max = clock_limit / 100; + + return 0; + } + + if (max) { + switch (clk_type) { + case SMU_GFXCLK: + case SMU_SCLK: + *max = clk_table->MaxGfxClk; + break; + case SMU_MCLK: + case SMU_UCLK: + max_dpm_level = 0; + break; + case SMU_FCLK: + max_dpm_level = clk_table->NumFclkLevelsEnabled - 1; + break; + case SMU_SOCCLK: + max_dpm_level = clk_table->NumSocClkLevelsEnabled - 1; + break; + default: + ret = -EINVAL; + goto failed; + } + + if (clk_type != SMU_GFXCLK && clk_type != SMU_SCLK) { + ret = smu_v15_0_common_get_dpm_freq_by_index(smu, clk_type, + max_dpm_level, max); + if (ret) + goto failed; + } + } + + if (min) { + switch (clk_type) { + case SMU_GFXCLK: + case SMU_SCLK: + *min = clk_table->MinGfxClk; + break; + case SMU_MCLK: + case SMU_UCLK: + min_dpm_level = clk_table->NumMemPstatesEnabled - 1; + break; + case SMU_FCLK: + min_dpm_level = 0; + break; + case SMU_SOCCLK: + min_dpm_level = 0; + break; + default: + ret = -EINVAL; + goto failed; + } + + if (clk_type != SMU_GFXCLK && clk_type != SMU_SCLK) { + ret = smu_v15_0_common_get_dpm_freq_by_index(smu, clk_type, + min_dpm_level, min); + if (ret) + goto failed; + } + } + +failed: + return ret; +} + static int smu_v15_0_common_get_dpm_ultimate_freq(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t *min, uint32_t *max) { - if (clk_type != SMU_VCLK1 && clk_type != SMU_DCLK1) + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(15, 0, 5)) + smu_v15_0_5_get_dpm_ultimate_freq(smu, clk_type, min, max); + else if (clk_type != SMU_VCLK1 && clk_type != SMU_DCLK1) smu_v15_0_0_get_dpm_ultimate_freq(smu, clk_type, min, max); return 0; @@ -986,11 +1127,36 @@ static int smu_v15_0_0_get_dpm_level_count(struct smu_context *smu, return 0; } +static int smu_v15_0_5_get_dpm_level_count(struct smu_context *smu, + enum smu_clk_type clk_type, + uint32_t *count) +{ + DpmClocks_t_v15_0_5 *clk_table = smu->smu_table.clocks_table; + + switch (clk_type) { + case SMU_SOCCLK: + *count = clk_table->NumSocClkLevelsEnabled; + break; + case SMU_MCLK: + *count = clk_table->NumMemPstatesEnabled; + break; + case SMU_FCLK: + *count = clk_table->NumFclkLevelsEnabled; + break; + default: + break; + } + + return 0; +} + static int smu_v15_0_common_get_dpm_level_count(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t *count) { - if (clk_type != SMU_VCLK1 && clk_type != SMU_DCLK1) + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(15, 0, 5)) + smu_v15_0_5_get_dpm_level_count(smu, clk_type, count); + else if (clk_type != SMU_VCLK1 && clk_type != SMU_DCLK1) smu_v15_0_0_get_dpm_level_count(smu, clk_type, count); return 0; @@ -1363,9 +1529,24 @@ static int smu_v15_0_0_set_fine_grain_gfx_freq_parameters(struct smu_context *sm return 0; } +static int smu_v15_0_5_set_fine_grain_gfx_freq_parameters(struct smu_context *smu) +{ + DpmClocks_t_v15_0_5 *clk_table = smu->smu_table.clocks_table; + + smu->gfx_default_hard_min_freq = clk_table->MinGfxClk; + smu->gfx_default_soft_max_freq = clk_table->MaxGfxClk; + smu->gfx_actual_hard_min_freq = 0; + smu->gfx_actual_soft_max_freq = 0; + + return 0; +} + static int smu_v15_0_common_set_fine_grain_gfx_freq_parameters(struct smu_context *smu) { - smu_v15_0_0_set_fine_grain_gfx_freq_parameters(smu); + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(15, 0, 5)) + smu_v15_0_5_set_fine_grain_gfx_freq_parameters(smu); + else + smu_v15_0_0_set_fine_grain_gfx_freq_parameters(smu); return 0; } @@ -1405,9 +1586,36 @@ static int smu_v15_0_0_get_dpm_table(struct smu_context *smu, struct dpm_clocks return 0; } +static int smu_v15_0_5_get_dpm_table(struct smu_context *smu, struct dpm_clocks *clock_table) +{ + DpmClocks_t_v15_0_5 *clk_table = smu->smu_table.clocks_table; + uint8_t idx; + + /* + * Only the Clock information of SOC and + * VPE is copied to provide VPE DPM settings for use. + */ + for (idx = 0; idx < NUM_SOCCLK_DPM_LEVELS; idx++) { + clock_table->SocClocks[idx].Freq = + (idx < clk_table->NumSocClkLevelsEnabled) ? clk_table->SocClocks[idx]:0; + clock_table->SocClocks[idx].Vol = 0; + } + + for (idx = 0; idx < NUM_VPE_DPM_LEVELS; idx++) { + clock_table->VPEClocks[idx].Freq = + (idx < clk_table->VpeClkLevelsEnabled) ? clk_table->VPEClocks[idx]:0; + clock_table->VPEClocks[idx].Vol = 0; + } + + return 0; +} + static int smu_v15_0_common_get_dpm_table(struct smu_context *smu, struct dpm_clocks *clock_table) { - smu_v15_0_0_get_dpm_table(smu, clock_table); + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(15, 0, 5)) + smu_v15_0_5_get_dpm_table(smu, clock_table); + else + smu_v15_0_0_get_dpm_table(smu, clock_table); return 0; } -- cgit v1.2.3 From d8726ef11512754a68c0ab53c57634a569b8feff Mon Sep 17 00:00:00 2001 From: Pierre-Eric Pelloux-Prayer Date: Mon, 22 Jun 2026 10:11:22 +0200 Subject: drm/amdgpu: move debug_vm handling to amdgpu_cs_parser_fini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit referenced below restarts the CS if the validation is still in progress. When debug_vm is enabled, all BOs from the CS are invalidated so we will hit an infinite loop. To avoid that, defer BO invalidation to amdgpu_cs_parser_fini. Fixes: 59720bfd8c6d ("drm/amdgpu: restart the CS if some parts of the VM are still invalidated") Signed-off-by: Pierre-Eric Pelloux-Prayer Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 8c990ee9daa295462df24982ce6878db997a380a) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index e714cee2997a..5445f75741b5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -1177,19 +1177,6 @@ static int amdgpu_cs_vm_handling(struct amdgpu_cs_parser *p) job->vm_pd_addr = amdgpu_gmc_pd_addr(vm->root.bo); } - if (adev->debug_vm) { - /* Invalidate all BOs to test for userspace bugs */ - amdgpu_bo_list_for_each_entry(e, p->bo_list) { - struct amdgpu_bo *bo = e->bo; - - /* ignore duplicates */ - if (!bo) - continue; - - amdgpu_vm_bo_invalidate(bo, false); - } - } - return 0; } @@ -1378,6 +1365,8 @@ static int amdgpu_cs_submit(struct amdgpu_cs_parser *p, /* Cleanup the parser structure */ static void amdgpu_cs_parser_fini(struct amdgpu_cs_parser *parser) { + struct amdgpu_device *adev = parser->adev; + struct amdgpu_bo_list_entry *e; unsigned int i; amdgpu_sync_free(&parser->sync); @@ -1393,8 +1382,21 @@ static void amdgpu_cs_parser_fini(struct amdgpu_cs_parser *parser) if (parser->ctx) amdgpu_ctx_put(parser->ctx); - if (parser->bo_list) + if (parser->bo_list) { + if (adev->debug_vm) { + /* Invalidate all BOs to test for userspace bugs */ + amdgpu_bo_list_for_each_entry(e, parser->bo_list) { + struct amdgpu_bo *bo = e->bo; + + /* ignore duplicates */ + if (!bo) + continue; + + amdgpu_vm_bo_invalidate(bo, false); + } + } amdgpu_bo_list_put(parser->bo_list); + } for (i = 0; i < parser->nchunks; i++) kvfree(parser->chunks[i].kdata); -- cgit v1.2.3 From 99b2fe4f19e3be0a8d0a0b5ea98d855970889653 Mon Sep 17 00:00:00 2001 From: Gang Ba Date: Tue, 14 Jul 2026 15:08:57 -0400 Subject: drm/amdkfd: Fix missing authorization check in KFD_IOC_DBG_TRAP_DISABLE Prevent unauthorized termination of active GPU debug sessions. Previously, users with /dev/kfd access could terminate another process's debug session without proper ownership or ptrace authorization. Signed-off-by: Gang Ba Reviewed-by: Kent Russell Signed-off-by: Alex Deucher (cherry picked from commit 4db4c5ffd5585b72622ecf6ffedf2da258ee23f5) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c index c7edebd2fd8a..e1689b3d2add 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c @@ -3109,10 +3109,14 @@ static int kfd_ioctl_set_debug_trap(struct file *filep, struct kfd_process *p, v goto out; } - /* Check if target is still PTRACED. */ + /* + * Verify debugger has permission to debug target process. + * For cross-process debugging, require active ptrace relationship. + * This applies to ALL operations to prevent unauthorized interference. + */ rcu_read_lock(); - if (target != p && args->op != KFD_IOC_DBG_TRAP_DISABLE - && ptrace_parent(target->lead_thread) != current) { + if (target != p && ptrace_parent(target->lead_thread) != current + && target->debugger_process != p) { pr_err("PID %i is not PTRACED and cannot be debugged\n", args->pid); r = -EPERM; } -- cgit v1.2.3 From a8d234a1133f02bfbbdaac18b889219949f28108 Mon Sep 17 00:00:00 2001 From: Shubhankar Milind Sardeshpande Date: Wed, 22 Jul 2026 10:51:56 +0530 Subject: drm/amdgpu: Enable support for PSP 15_0_5 Add PSP 15.0.5 related offsets for GFX to KMD interface and enable support for it. Co-developed-by: Pratik Vishwakarma Signed-off-by: Pratik Vishwakarma Signed-off-by: Shubhankar Milind Sardeshpande Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Alex Deucher (cherry picked from commit b01e244c82c5d033d7424a64abe4079f3fceb869) --- drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 5 +- drivers/gpu/drm/amd/amdgpu/psp_v15_0.c | 93 ++++++++++++++++++++++----- 3 files changed, 83 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c index 2860f12915c0..5e83edbd313b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c @@ -2304,6 +2304,7 @@ static int amdgpu_discovery_set_psp_ip_blocks(struct amdgpu_device *adev) amdgpu_device_ip_block_add(adev, &psp_v14_0_ip_block); break; case IP_VERSION(15, 0, 0): + case IP_VERSION(15, 0, 5): case IP_VERSION(15, 0, 9): amdgpu_device_ip_block_add(adev, &psp_v15_0_ip_block); break; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c index ca80b6194cac..7139cb3b2db5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c @@ -275,6 +275,7 @@ static int psp_early_init(struct amdgpu_ip_block *ip_block) psp->boot_time_tmr = false; break; case IP_VERSION(15, 0, 0): + case IP_VERSION(15, 0, 5): case IP_VERSION(15, 0, 9): psp_v15_0_0_set_psp_funcs(psp); psp->boot_time_tmr = false; @@ -3503,8 +3504,10 @@ static int psp_load_non_psp_fw(struct psp_context *psp) amdgpu_ip_version(adev, MP0_HWIP, 0) == IP_VERSION(15, 0, 0) || amdgpu_ip_version(adev, MP0_HWIP, 0) == - IP_VERSION(15, 0, 8) || + IP_VERSION(15, 0, 5) || amdgpu_ip_version(adev, MP0_HWIP, 0) == + IP_VERSION(15, 0, 8) || + amdgpu_ip_version(adev, MP0_HWIP, 0) == IP_VERSION(15, 0, 9)) && (ucode->ucode_id == AMDGPU_UCODE_ID_SDMA1 || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA2 || diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v15_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v15_0.c index 2a4d91368ac6..abaa40b6def9 100644 --- a/drivers/gpu/drm/amd/amdgpu/psp_v15_0.c +++ b/drivers/gpu/drm/amd/amdgpu/psp_v15_0.c @@ -33,9 +33,22 @@ MODULE_FIRMWARE("amdgpu/psp_15_0_0_toc.bin"); MODULE_FIRMWARE("amdgpu/psp_15_0_0_ta.bin"); +MODULE_FIRMWARE("amdgpu/psp_15_0_5_toc.bin"); +MODULE_FIRMWARE("amdgpu/psp_15_0_5_ta.bin"); MODULE_FIRMWARE("amdgpu/psp_15_0_9_toc.bin"); MODULE_FIRMWARE("amdgpu/psp_15_0_9_ta.bin"); +#define regMPASP_PCRU0_MPASP_C2PMSG_64 0x4280 +#define regMPASP_PCRU0_MPASP_C2PMSG_64_BASE_IDX 2 +#define regMPASP_PCRU0_MPASP_C2PMSG_67 0x4283 +#define regMPASP_PCRU0_MPASP_C2PMSG_67_BASE_IDX 2 +#define regMPASP_PCRU0_MPASP_C2PMSG_69 0x4285 +#define regMPASP_PCRU0_MPASP_C2PMSG_69_BASE_IDX 2 +#define regMPASP_PCRU0_MPASP_C2PMSG_70 0x4286 +#define regMPASP_PCRU0_MPASP_C2PMSG_70_BASE_IDX 2 +#define regMPASP_PCRU0_MPASP_C2PMSG_71 0x4287 +#define regMPASP_PCRU0_MPASP_C2PMSG_71_BASE_IDX 2 + static int psp_v15_0_0_init_microcode(struct psp_context *psp) { struct amdgpu_device *adev = psp->adev; @@ -71,14 +84,25 @@ static int psp_v15_0_0_ring_stop(struct psp_context *psp, ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, regMPASP_SMN_C2PMSG_101), 0x80000000, 0x80000000, false); } else { - /* Write the ring destroy command*/ - WREG32_SOC15(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_64, - GFX_CTRL_CMD_ID_DESTROY_RINGS); - /* there might be handshake issue with hardware which needs delay */ - mdelay(20); - /* Wait for response flag (bit 31) */ - ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_64), - 0x80000000, 0x80000000, false); + if (amdgpu_ip_version(adev, MP0_HWIP, 0) == IP_VERSION(15, 0, 5)) { + /* Write the ring destroy command*/ + WREG32_SOC15(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_64, + GFX_CTRL_CMD_ID_DESTROY_RINGS); + /* there might be handshake issue with hardware which needs delay */ + mdelay(20); + /* Wait for response flag (bit 31) */ + ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_64), + 0x80000000, 0x80000000, false); + } else { + /* Write the ring destroy command*/ + WREG32_SOC15(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_64, + GFX_CTRL_CMD_ID_DESTROY_RINGS); + /* there might be handshake issue with hardware which needs delay */ + mdelay(20); + /* Wait for response flag (bit 31) */ + ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_64), + 0x80000000, 0x80000000, false); + } } return ret; @@ -118,14 +142,44 @@ static int psp_v15_0_0_ring_create(struct psp_context *psp, 0x80000000, 0x8000FFFF, false); } else { - /* Wait for sOS ready for ring creation */ - ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_64), - 0x80000000, 0x80000000, false); + if (amdgpu_ip_version(adev, MP0_HWIP, 0) == IP_VERSION(15, 0, 5)) { + /* Wait for sOS ready for ring creation */ + ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_64), + 0x80000000, 0x80000000, false); if (ret) { DRM_ERROR("Failed to wait for trust OS ready for ring creation\n"); return ret; } + /* Write low address of the ring to C2PMSG_69 */ + psp_ring_reg = lower_32_bits(ring->ring_mem_mc_addr); + WREG32_SOC15(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_69, psp_ring_reg); + /* Write high address of the ring to C2PMSG_70 */ + psp_ring_reg = upper_32_bits(ring->ring_mem_mc_addr); + WREG32_SOC15(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_70, psp_ring_reg); + /* Write size of ring to C2PMSG_71 */ + psp_ring_reg = ring->ring_size; + WREG32_SOC15(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_71, psp_ring_reg); + /* Write the ring initialization command to C2PMSG_64 */ + psp_ring_reg = ring_type; + psp_ring_reg = psp_ring_reg << 16; + WREG32_SOC15(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_64, psp_ring_reg); + + /* there might be handshake issue with hardware which needs delay */ + mdelay(20); + + /* Wait for response flag (bit 31) in C2PMSG_64 */ + ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_64), + 0x80000000, 0x8000FFFF, false); + } else { + /* Wait for sOS ready for ring creation */ + ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_64), + 0x80000000, 0x80000000, false); + if (ret) { + DRM_ERROR("Failed to wait for trust OS ready for ring creation\n"); + return ret; + } + /* Write low address of the ring to C2PMSG_69 */ psp_ring_reg = lower_32_bits(ring->ring_mem_mc_addr); WREG32_SOC15(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_69, psp_ring_reg); @@ -146,6 +200,7 @@ static int psp_v15_0_0_ring_create(struct psp_context *psp, /* Wait for response flag (bit 31) in C2PMSG_64 */ ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_64), 0x80000000, 0x8000FFFF, false); + } } return ret; @@ -176,8 +231,12 @@ static uint32_t psp_v15_0_0_ring_get_wptr(struct psp_context *psp) if (amdgpu_sriov_vf(adev)) data = RREG32_SOC15(MP0, 0, regMPASP_SMN_C2PMSG_102); - else - data = RREG32_SOC15(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_67); + else { + if (amdgpu_ip_version(adev, MP0_HWIP, 0) == IP_VERSION(15, 0, 5)) + data = RREG32_SOC15(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_67); + else + data = RREG32_SOC15(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_67); + } return data; } @@ -190,8 +249,12 @@ static void psp_v15_0_0_ring_set_wptr(struct psp_context *psp, uint32_t value) WREG32_SOC15(MP0, 0, regMPASP_SMN_C2PMSG_102, value); WREG32_SOC15(MP0, 0, regMPASP_SMN_C2PMSG_101, GFX_CTRL_CMD_ID_CONSUME_CMD); - } else - WREG32_SOC15(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_67, value); + } else { + if (amdgpu_ip_version(adev, MP0_HWIP, 0) == IP_VERSION(15, 0, 5)) + WREG32_SOC15(MP0, 0, regMPASP_PCRU0_MPASP_C2PMSG_67, value); + else + WREG32_SOC15(MP0, 0, regMPASP_PCRU1_MPASP_C2PMSG_67, value); + } } static const struct psp_funcs psp_v15_0_0_funcs = { -- cgit v1.2.3 From acea01861838ddac70e3a89ef9fbd5f2073f3f91 Mon Sep 17 00:00:00 2001 From: Shubhankar Milind Sardeshpande Date: Thu, 16 Jul 2026 18:17:48 +0530 Subject: drm/amdgpu: Fix NBIO 7.11.5 offsets Fix NBIO 7.11.5 related offsets Signed-off-by: Shubhankar Milind Sardeshpande Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Alex Deucher (cherry picked from commit dcc27ae3092211c913a1bea04618c4faf1234d48) --- drivers/gpu/drm/amd/amdgpu/nbif_v6_3_1.c | 146 ++++++++++++++++--------------- 1 file changed, 76 insertions(+), 70 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/nbif_v6_3_1.c b/drivers/gpu/drm/amd/amdgpu/nbif_v6_3_1.c index c78f0598637f..000516b5845a 100644 --- a/drivers/gpu/drm/amd/amdgpu/nbif_v6_3_1.c +++ b/drivers/gpu/drm/amd/amdgpu/nbif_v6_3_1.c @@ -30,70 +30,76 @@ #include "ivsrcid/nbio/irqsrcs_nbif_7_4.h" #include -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_0_CTRL_nbif_4_10 0x4f0aeb -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_0_CTRL_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_0_CTRL1_nbif_4_10 0x4f0aec -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_0_CTRL1_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_1_CTRL_nbif_4_10 0x4f0aed -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_1_CTRL_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_1_CTRL1_nbif_4_10 0x4f0aee -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_1_CTRL1_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_2_CTRL_nbif_4_10 0x4f0aef -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_2_CTRL_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_2_CTRL1_nbif_4_10 0x4f0af0 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_2_CTRL1_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_3_CTRL_nbif_4_10 0x4f0af1 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_3_CTRL_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_3_CTRL1_nbif_4_10 0x4f0af2 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_3_CTRL1_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_4_CTRL_nbif_4_10 0x4f0af3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_4_CTRL_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_4_CTRL1_nbif_4_10 0x4f0af4 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_4_CTRL1_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_5_CTRL_nbif_4_10 0x4f0af5 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_5_CTRL_nbif_4_10_BASE_IDX 3 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_5_CTRL1_nbif_4_10 0x4f0af6 -#define regGDC_S2A0_S2A_DOORBELL_ENTRY_5_CTRL1_nbif_4_10_BASE_IDX 3 -#define regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0_nbif_4_10 0x0021 -#define regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0_nbif_4_10_BASE_IDX 2 - -#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_BASE_HIGH_nbio_7_11_5 0x8e13 -#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_BASE_HIGH_nbio_7_11_5_BASE_IDX 5 -#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_BASE_LOW_nbio_7_11_5 0x8e14 -#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_BASE_LOW_nbio_7_11_5_BASE_IDX 5 -#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_CNTL_nbio_7_11_5 0x8e15 -#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_CNTL_nbio_7_11_5_BASE_IDX 5 - -#define regBIF_BX0_REMAP_HDP_MEM_FLUSH_CNTL_nbio_7_11_5 0x8e4d -#define regBIF_BX0_REMAP_HDP_MEM_FLUSH_CNTL_nbio_7_11_5_BASE_IDX 5 -#define regBIF_BX0_REMAP_HDP_REG_FLUSH_CNTL_nbio_7_11_5 0x8e4e -#define regBIF_BX0_REMAP_HDP_REG_FLUSH_CNTL_nbio_7_11_5_BASE_IDX 5 - -#define regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0_nbio_7_11_5 0xd000 -#define regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0_nbio_7_11_5_BASE_IDX 5 - -#define regBIF_BX0_BIF_FB_EN_nbio_7_11_5 0x8e20 -#define regBIF_BX0_BIF_FB_EN_nbio_7_11_5_BASE_IDX 5 - -#define regBIF_BX0_INTERRUPT_CNTL_nbio_7_11_5 0x8e11 -#define regBIF_BX0_INTERRUPT_CNTL_nbio_7_11_5_BASE_IDX 5 -#define regBIF_BX0_INTERRUPT_CNTL2_nbio_7_11_5 0x8e12 -#define regBIF_BX0_INTERRUPT_CNTL2_nbio_7_11_5_BASE_IDX 5 - -#define regBIF_BX_PF0_GPU_HDP_FLUSH_REQ_nbio_7_11_5 0x8e26 -#define regBIF_BX_PF0_GPU_HDP_FLUSH_REQ_nbio_7_11_5_BASE_IDX 5 -#define regBIF_BX_PF0_GPU_HDP_FLUSH_DONE_nbio_7_11_5 0x8e27 -#define regBIF_BX_PF0_GPU_HDP_FLUSH_DONE_nbio_7_11_5_BASE_IDX 5 - -#define regBIF_BX_PF0_HDP_MEM_COHERENCY_FLUSH_CNTL_nbio_7_11_5 0x8e17 -#define regBIF_BX_PF0_HDP_MEM_COHERENCY_FLUSH_CNTL_nbio_7_11_5_BASE_IDX 5 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_0_CTRL_nbif_4_10 0x4f0aeb +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_0_CTRL_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_0_CTRL1_nbif_4_10 0x4f0aec +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_0_CTRL1_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_1_CTRL_nbif_4_10 0x4f0aed +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_1_CTRL_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_1_CTRL1_nbif_4_10 0x4f0aee +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_1_CTRL1_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_2_CTRL_nbif_4_10 0x4f0aef +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_2_CTRL_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_2_CTRL1_nbif_4_10 0x4f0af0 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_2_CTRL1_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_3_CTRL_nbif_4_10 0x4f0af1 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_3_CTRL_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_3_CTRL1_nbif_4_10 0x4f0af2 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_3_CTRL1_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_4_CTRL_nbif_4_10 0x4f0af3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_4_CTRL_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_4_CTRL1_nbif_4_10 0x4f0af4 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_4_CTRL1_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_5_CTRL_nbif_4_10 0x4f0af5 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_5_CTRL_nbif_4_10_BASE_IDX 3 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_5_CTRL1_nbif_4_10 0x4f0af6 +#define regGDC_S2A0_S2A_DOORBELL_ENTRY_5_CTRL1_nbif_4_10_BASE_IDX 3 +#define regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0_nbif_4_10 0x0021 +#define regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0_nbif_4_10_BASE_IDX 2 + +#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_BASE_HIGH_nbio_7_11_5 0x8e13 +#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_BASE_HIGH_nbio_7_11_5_BASE_IDX 5 +#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_BASE_LOW_nbio_7_11_5 0x8e14 +#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_BASE_LOW_nbio_7_11_5_BASE_IDX 5 +#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_CNTL_nbio_7_11_5 0x8e15 +#define regBIF_BX_PF0_DOORBELL_SELFRING_GPA_APER_CNTL_nbio_7_11_5_BASE_IDX 5 + +#define regBIF_BX1_REMAP_HDP_MEM_FLUSH_CNTL_nbio_7_11_5 0x012d +#define regBIF_BX1_REMAP_HDP_MEM_FLUSH_CNTL_nbio_7_11_5_BASE_IDX 2 +#define regBIF_BX1_REMAP_HDP_REG_FLUSH_CNTL_nbio_7_11_5 0x012e +#define regBIF_BX1_REMAP_HDP_REG_FLUSH_CNTL_nbio_7_11_5_BASE_IDX 2 + +#define regRCC_STRAP1_RCC_DEV0_EPF0_STRAP0_nbio_7_11_5 0x0021 +#define regRCC_STRAP1_RCC_DEV0_EPF0_STRAP0_nbio_7_11_5_BASE_IDX 2 + +#define regBIF_BX1_BIF_FB_EN_nbio_7_11_5 0x0100 +#define regBIF_BX1_BIF_FB_EN_nbio_7_11_5_BASE_IDX 2 + +#define regBIF_BX1_INTERRUPT_CNTL_nbio_7_11_5 0x00f1 +#define regBIF_BX1_INTERRUPT_CNTL_nbio_7_11_5_BASE_IDX 2 +#define regBIF_BX1_INTERRUPT_CNTL2_nbio_7_11_5 0x00f2 +#define regBIF_BX1_INTERRUPT_CNTL2_nbio_7_11_5_BASE_IDX 2 + +#define regBIF_BX_PF1_GPU_HDP_FLUSH_REQ_nbio_7_11_5 0x0106 +#define regBIF_BX_PF1_GPU_HDP_FLUSH_REQ_nbio_7_11_5_BASE_IDX 2 +#define regBIF_BX_PF1_GPU_HDP_FLUSH_DONE_nbio_7_11_5 0x0107 +#define regBIF_BX_PF1_GPU_HDP_FLUSH_DONE_nbio_7_11_5_BASE_IDX 2 + +#define regBIF_BX_PF1_HDP_MEM_COHERENCY_FLUSH_CNTL_nbio_7_11_5 0x00f7 +#define regBIF_BX_PF1_HDP_MEM_COHERENCY_FLUSH_CNTL_nbio_7_11_5_BASE_IDX 2 + +//BIF_BX1_BIF_FB_EN +#define BIF_BX1_BIF_FB_EN__FB_READ_EN__SHIFT_nbio_7_11_5 0x0 +#define BIF_BX1_BIF_FB_EN__FB_WRITE_EN__SHIFT_nbio_7_11_5 0x1 +#define BIF_BX1_BIF_FB_EN__FB_READ_EN_MASK_nbio_7_11_5 0x00000001L +#define BIF_BX1_BIF_FB_EN__FB_WRITE_EN_MASK_nbio_7_11_5 0x00000002L static void nbif_v6_3_1_remap_hdp_registers(struct amdgpu_device *adev) { if (amdgpu_ip_version(adev, NBIO_HWIP, 0) == IP_VERSION(7, 11, 5)) { - WREG32_SOC15(NBIO, 0, regBIF_BX0_REMAP_HDP_MEM_FLUSH_CNTL_nbio_7_11_5, + WREG32_SOC15(NBIO, 0, regBIF_BX1_REMAP_HDP_MEM_FLUSH_CNTL_nbio_7_11_5, adev->rmmio_remap.reg_offset + KFD_MMIO_REMAP_HDP_MEM_FLUSH_CNTL); - WREG32_SOC15(NBIO, 0, regBIF_BX0_REMAP_HDP_REG_FLUSH_CNTL_nbio_7_11_5, + WREG32_SOC15(NBIO, 0, regBIF_BX1_REMAP_HDP_REG_FLUSH_CNTL_nbio_7_11_5, adev->rmmio_remap.reg_offset + KFD_MMIO_REMAP_HDP_REG_FLUSH_CNTL); } else { WREG32_SOC15(NBIO, 0, regBIF_BX0_REMAP_HDP_MEM_FLUSH_CNTL, @@ -110,7 +116,7 @@ static u32 nbif_v6_3_1_get_rev_id(struct amdgpu_device *adev) if (amdgpu_ip_version(adev, NBIO_HWIP, 0) == IP_VERSION(7, 11, 4)) tmp = RREG32_SOC15(NBIO, 0, regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0_nbif_4_10); else if (amdgpu_ip_version(adev, NBIO_HWIP, 0) == IP_VERSION(7, 11, 5)) - tmp = RREG32_SOC15(NBIO, 0, regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0_nbio_7_11_5); + tmp = RREG32_SOC15(NBIO, 0, regRCC_STRAP1_RCC_DEV0_EPF0_STRAP0_nbio_7_11_5); else tmp = RREG32_SOC15(NBIO, 0, regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0); @@ -124,11 +130,11 @@ static void nbif_v6_3_1_mc_access_enable(struct amdgpu_device *adev, bool enable { if (amdgpu_ip_version(adev, NBIO_HWIP, 0) == IP_VERSION(7, 11, 5)) { if (enable) - WREG32_SOC15(NBIO, 0, regBIF_BX0_BIF_FB_EN_nbio_7_11_5, - BIF_BX0_BIF_FB_EN__FB_READ_EN_MASK | - BIF_BX0_BIF_FB_EN__FB_WRITE_EN_MASK); + WREG32_SOC15(NBIO, 0, regBIF_BX1_BIF_FB_EN_nbio_7_11_5, + BIF_BX1_BIF_FB_EN__FB_READ_EN_MASK_nbio_7_11_5 | + BIF_BX1_BIF_FB_EN__FB_WRITE_EN_MASK_nbio_7_11_5); else - WREG32_SOC15(NBIO, 0, regBIF_BX0_BIF_FB_EN_nbio_7_11_5, 0); + WREG32_SOC15(NBIO, 0, regBIF_BX1_BIF_FB_EN_nbio_7_11_5, 0); } else { if (enable) WREG32_SOC15(NBIO, 0, regBIF_BX0_BIF_FB_EN, @@ -383,12 +389,12 @@ static void nbif_v6_3_1_ih_control(struct amdgpu_device *adev) /* setup interrupt control */ if (amdgpu_ip_version(adev, NBIO_HWIP, 0) == IP_VERSION(7, 11, 5)) - WREG32_SOC15(NBIO, 0, regBIF_BX0_INTERRUPT_CNTL2_nbio_7_11_5, + WREG32_SOC15(NBIO, 0, regBIF_BX1_INTERRUPT_CNTL2_nbio_7_11_5, adev->dummy_page_addr >> 8); else WREG32_SOC15(NBIO, 0, regBIF_BX0_INTERRUPT_CNTL2, adev->dummy_page_addr >> 8); - interrupt_cntl = RREG32_SOC15(NBIO, 0, regBIF_BX0_INTERRUPT_CNTL_nbio_7_11_5); + interrupt_cntl = RREG32_SOC15(NBIO, 0, regBIF_BX1_INTERRUPT_CNTL_nbio_7_11_5); /* * BIF_BX0_INTERRUPT_CNTL__IH_DUMMY_RD_OVERRIDE_MASK=0 - dummy read disabled with msi, enabled without msi * BIF_BX0_INTERRUPT_CNTL__IH_DUMMY_RD_OVERRIDE_MASK=1 - dummy read controlled by IH_DUMMY_RD_EN @@ -401,7 +407,7 @@ static void nbif_v6_3_1_ih_control(struct amdgpu_device *adev) IH_REQ_NONSNOOP_EN, 0); if (amdgpu_ip_version(adev, NBIO_HWIP, 0) == IP_VERSION(7, 11, 5)) - WREG32_SOC15(NBIO, 0, regBIF_BX0_INTERRUPT_CNTL_nbio_7_11_5, interrupt_cntl); + WREG32_SOC15(NBIO, 0, regBIF_BX1_INTERRUPT_CNTL_nbio_7_11_5, interrupt_cntl); else WREG32_SOC15(NBIO, 0, regBIF_BX0_INTERRUPT_CNTL, interrupt_cntl); } @@ -427,7 +433,7 @@ nbif_v6_3_1_get_clockgating_state(struct amdgpu_device *adev, static u32 nbif_v6_3_1_get_hdp_flush_req_offset(struct amdgpu_device *adev) { if (amdgpu_ip_version(adev, NBIO_HWIP, 0) == IP_VERSION(7, 11, 5)) - return SOC15_REG_OFFSET(NBIO, 0, regBIF_BX_PF0_GPU_HDP_FLUSH_REQ_nbio_7_11_5); + return SOC15_REG_OFFSET(NBIO, 0, regBIF_BX_PF1_GPU_HDP_FLUSH_REQ_nbio_7_11_5); else return SOC15_REG_OFFSET(NBIO, 0, regBIF_BX_PF0_GPU_HDP_FLUSH_REQ); } @@ -435,7 +441,7 @@ static u32 nbif_v6_3_1_get_hdp_flush_req_offset(struct amdgpu_device *adev) static u32 nbif_v6_3_1_get_hdp_flush_done_offset(struct amdgpu_device *adev) { if (amdgpu_ip_version(adev, NBIO_HWIP, 0) == IP_VERSION(7, 11, 5)) - return SOC15_REG_OFFSET(NBIO, 0, regBIF_BX_PF0_GPU_HDP_FLUSH_DONE_nbio_7_11_5); + return SOC15_REG_OFFSET(NBIO, 0, regBIF_BX_PF1_GPU_HDP_FLUSH_DONE_nbio_7_11_5); else return SOC15_REG_OFFSET(NBIO, 0, regBIF_BX_PF0_GPU_HDP_FLUSH_DONE); } @@ -622,7 +628,7 @@ static void nbif_v6_3_1_set_reg_remap(struct amdgpu_device *adev) } else { if (amdgpu_ip_version(adev, NBIO_HWIP, 0) == IP_VERSION(7, 11, 5)) adev->rmmio_remap.reg_offset = SOC15_REG_OFFSET(NBIO, 0, - regBIF_BX_PF0_HDP_MEM_COHERENCY_FLUSH_CNTL_nbio_7_11_5) << 2; + regBIF_BX_PF1_HDP_MEM_COHERENCY_FLUSH_CNTL_nbio_7_11_5) << 2; else adev->rmmio_remap.reg_offset = SOC15_REG_OFFSET(NBIO, 0, regBIF_BX_PF0_HDP_MEM_COHERENCY_FLUSH_CNTL) << 2; -- cgit v1.2.3 From 83463a96ea3c7d8ae636a4d6a0ba63c9ce410724 Mon Sep 17 00:00:00 2001 From: William Palacek Date: Mon, 20 Jul 2026 12:51:34 -0400 Subject: drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment eop_ring_buffer_size in struct queue_properties is a u32. In kfd_queue_acquire_buffers() the expected EOP buffer size is computed as ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to 0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB BO, so CP EOP writes can land past the buffer and fault the GPU. Cast the operand to u64 so the alignment is computed in 64-bit; the size check in kfd_queue_buffer_get() then rejects the oversized request. Fixes: 42ea9cf2f16b ("drm/amdkfd: Relax size checking during queue buffer get") Signed-off-by: William Palacek Reviewed-by: Alysa Liu Signed-off-by: Alex Deucher (cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_queue.c b/drivers/gpu/drm/amd/amdkfd/kfd_queue.c index 98a5512b701b..b249e7d1af48 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_queue.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_queue.c @@ -288,7 +288,7 @@ int kfd_queue_acquire_buffers(struct kfd_process_device *pdd, struct queue_prope } err = kfd_queue_buffer_get(vm, (void *)properties->eop_ring_buffer_address, &properties->eop_buf_bo, - ALIGN(properties->eop_ring_buffer_size, PAGE_SIZE)); + ALIGN((u64)properties->eop_ring_buffer_size, PAGE_SIZE)); if (err) goto out_err_unreserve; } -- cgit v1.2.3 From c2ac5a50c1804e22d5bc05c7e16693333751b3c0 Mon Sep 17 00:00:00 2001 From: Kanala Ramalingeswara Reddy Date: Thu, 23 Jul 2026 00:10:01 +0530 Subject: drm/amdgpu: enable mode2 reset for SMU IP v15.0.5 Set the default reset method to mode2 for SMU 15.0.5. Signed-off-by: Kanala Ramalingeswara Reddy Reviewed-by: Pratik Vishwakarma Signed-off-by: Alex Deucher (cherry picked from commit 314d49abe315cd0d0a872a43f68f08be43a305c8) --- drivers/gpu/drm/amd/amdgpu/soc21.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/soc21.c b/drivers/gpu/drm/amd/amdgpu/soc21.c index e0b80abcd075..e9d51e992a8c 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc21.c +++ b/drivers/gpu/drm/amd/amdgpu/soc21.c @@ -406,6 +406,7 @@ soc21_asic_reset_method(struct amdgpu_device *adev) case IP_VERSION(14, 0, 4): case IP_VERSION(14, 0, 5): case IP_VERSION(15, 0, 0): + case IP_VERSION(15, 0, 5): case IP_VERSION(15, 0, 9): return AMD_RESET_METHOD_MODE2; default: -- cgit v1.2.3 From bb493058c35c8676e48269ab6732688ea733d23c Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Fri, 24 Jul 2026 07:41:29 +0800 Subject: drm/amd/pm: fix pptable use-after-free amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table after dropping adev->pm.mutex. The sysfs path then copies from that pointer. A concurrent pp_table write can replace and free the allocation during the copy, causing a use-after-free. Change the DPM interface to copy into caller-provided storage while the mutex is held. Keep the size-only query for attribute discovery without exposing the driver-owned pointer. Fixes: 1684d3ba4885 ("drm/amd/amdgpu: change pptable output format from ASCII to binary") Signed-off-by: Yang Wang Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher (cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 14 +++++++++++--- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 13 +++---------- drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h | 3 ++- 3 files changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c index f76ba6753551..c787e772b3cc 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c @@ -1183,12 +1183,14 @@ int amdgpu_dpm_dispatch_task(struct amdgpu_device *adev, return ret; } -int amdgpu_dpm_get_pp_table(struct amdgpu_device *adev, char **table) +int amdgpu_dpm_get_pp_table(struct amdgpu_device *adev, char *table, + size_t size) { const struct amd_pm_funcs *pp_funcs = adev->powerplay.pp_funcs; + char *pptable = NULL; int ret = 0; - if (!table) + if ((!table && size) || (table && !size)) return -EINVAL; if (amdgpu_sriov_vf(adev) || !pp_funcs->get_pp_table || adev->scpm_enabled) @@ -1196,7 +1198,13 @@ int amdgpu_dpm_get_pp_table(struct amdgpu_device *adev, char **table) mutex_lock(&adev->pm.mutex); ret = pp_funcs->get_pp_table(adev->powerplay.pp_handle, - table); + &pptable); + if (ret > 0 && !pptable) { + ret = -EINVAL; + } else if (ret > 0 && table) { + ret = min_t(size_t, ret, size); + memcpy(table, pptable, ret); + } mutex_unlock(&adev->pm.mutex); return ret; diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c index 97da01aff76c..d94ea54c33c3 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c @@ -564,25 +564,19 @@ static ssize_t amdgpu_get_pp_table(struct device *dev, { struct drm_device *ddev = dev_get_drvdata(dev); struct amdgpu_device *adev = drm_to_adev(ddev); - char *table = NULL; int size, ret; ret = amdgpu_pm_get_access_if_active(adev); if (ret) return ret; - size = amdgpu_dpm_get_pp_table(adev, &table); + size = amdgpu_dpm_get_pp_table(adev, buf, PAGE_SIZE - 1); amdgpu_pm_put_access(adev); if (size <= 0) return size; - if (size >= PAGE_SIZE) - size = PAGE_SIZE - 1; - - memcpy(buf, table, size); - return size; } @@ -2726,10 +2720,9 @@ static int default_attr_update(struct amdgpu_device *adev, struct amdgpu_device_ *states = ATTR_STATE_UNSUPPORTED; } else if (DEVICE_ATTR_IS(pp_table)) { int ret; - char *tmp = NULL; - ret = amdgpu_dpm_get_pp_table(adev, &tmp); - if (ret == -EOPNOTSUPP || !tmp) + ret = amdgpu_dpm_get_pp_table(adev, NULL, 0); + if (ret <= 0) *states = ATTR_STATE_UNSUPPORTED; else *states = ATTR_STATE_SUPPORTED; diff --git a/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h b/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h index aa3f427819a0..e95cd22a31cf 100644 --- a/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h +++ b/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h @@ -487,7 +487,8 @@ int amdgpu_dpm_get_pp_num_states(struct amdgpu_device *adev, int amdgpu_dpm_dispatch_task(struct amdgpu_device *adev, enum amd_pp_task task_id, enum amd_pm_state_type *user_state); -int amdgpu_dpm_get_pp_table(struct amdgpu_device *adev, char **table); +int amdgpu_dpm_get_pp_table(struct amdgpu_device *adev, char *table, + size_t size); int amdgpu_dpm_set_fine_grain_clk_vol(struct amdgpu_device *adev, uint32_t type, long *input, -- cgit v1.2.3 From 048f4541b71fb19645fb79d6e62e6e4da23a4035 Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Thu, 23 Jul 2026 23:18:33 +0800 Subject: drm/amd/pm: fix torn gpu metrics reads amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache after dropping adev->pm.mutex. The sysfs path then copies from that pointer. Another reader can refresh the cache in place during the copy and return a snapshot containing data from two generations. Pass caller-provided storage through the DPM interface and copy the metrics while the mutex is held. This keeps the cache pointer private and makes each sysfs read observe one complete sample. Fixes: 25c933b1c4fc ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)") Signed-off-by: Yang Wang Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher (cherry picked from commit 862333bb48693ecafcae25af0c9d9ec31015ac77) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 12 +++++++++--- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 8 +------- drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h | 3 ++- 3 files changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c index c787e772b3cc..6d1ad4d5b8f0 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c @@ -1434,17 +1434,23 @@ int amdgpu_dpm_set_power_profile_mode(struct amdgpu_device *adev, return ret; } -int amdgpu_dpm_get_gpu_metrics(struct amdgpu_device *adev, void **table) +ssize_t amdgpu_dpm_get_gpu_metrics(struct amdgpu_device *adev, void *buf, + size_t size) { const struct amd_pm_funcs *pp_funcs = adev->powerplay.pp_funcs; - int ret = 0; + void *table; + ssize_t ret; if (!pp_funcs->get_gpu_metrics) return 0; mutex_lock(&adev->pm.mutex); ret = pp_funcs->get_gpu_metrics(adev->powerplay.pp_handle, - table); + &table); + if (ret > 0) { + ret = min_t(ssize_t, ret, size); + memcpy(buf, table, ret); + } mutex_unlock(&adev->pm.mutex); return ret; diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c index d94ea54c33c3..763947fbf16f 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c @@ -1774,7 +1774,6 @@ static ssize_t amdgpu_get_gpu_metrics(struct device *dev, { struct drm_device *ddev = dev_get_drvdata(dev); struct amdgpu_device *adev = drm_to_adev(ddev); - void *gpu_metrics; ssize_t size = 0; int ret; @@ -1782,15 +1781,10 @@ static ssize_t amdgpu_get_gpu_metrics(struct device *dev, if (ret) return ret; - size = amdgpu_dpm_get_gpu_metrics(adev, &gpu_metrics); + size = amdgpu_dpm_get_gpu_metrics(adev, buf, PAGE_SIZE - 1); if (size <= 0) goto out; - if (size >= PAGE_SIZE) - size = PAGE_SIZE - 1; - - memcpy(buf, gpu_metrics, size); - out: amdgpu_pm_put_access(adev); diff --git a/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h b/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h index e95cd22a31cf..8d1b097a3c3c 100644 --- a/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h +++ b/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h @@ -518,7 +518,8 @@ int amdgpu_dpm_get_power_profile_mode(struct amdgpu_device *adev, char *buf); int amdgpu_dpm_set_power_profile_mode(struct amdgpu_device *adev, long *input, uint32_t size); -int amdgpu_dpm_get_gpu_metrics(struct amdgpu_device *adev, void **table); +ssize_t amdgpu_dpm_get_gpu_metrics(struct amdgpu_device *adev, void *buf, + size_t size); ssize_t amdgpu_dpm_get_xcp_metrics(struct amdgpu_device *adev, int xcp_id, void *table); ssize_t amdgpu_dpm_get_temp_metrics(struct amdgpu_device *adev, -- cgit v1.2.3 From 443290d70b01e9c35830c300e3247c06581b594c Mon Sep 17 00:00:00 2001 From: Ray Wu Date: Mon, 13 Jul 2026 22:23:34 +0800 Subject: drm/amd/display: Add AV mute wait frames to dce110_set_avmute Port the three-frame wait logic from dcn30_set_avmute to dce110_set_avmute so that older DCN versions (1.0, 2.0) also wait for GCP packets to be sent out before proceeding. This ensures HDMI sinks properly process the mute state, preventing garbled display after link re-establishment. Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167 Reviewed-by: Wayne Lin Signed-off-by: Ray Wu Signed-off-by: Fangzhi Zuo Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 414da24137ace80d8c59fefd43ba3ec9f5f854ba) Cc: stable@vger.kernel.org --- .../drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c index 042602c50e35..53fffe58602f 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c @@ -1337,8 +1337,27 @@ void dce110_blank_stream(struct pipe_ctx *pipe_ctx) void dce110_set_avmute(struct pipe_ctx *pipe_ctx, bool enable) { - if (pipe_ctx != NULL && pipe_ctx->stream_res.stream_enc != NULL) + if (pipe_ctx == NULL || pipe_ctx->stream_res.stream_enc == NULL) + return; + + if (dc_is_hdmi_signal(pipe_ctx->stream->signal)) { pipe_ctx->stream_res.stream_enc->funcs->set_avmute(pipe_ctx->stream_res.stream_enc, enable); + + /* Wait for three frames to make sure AV mute is sent out. + * Some HDMI sinks need additional GCP packets to properly + * process the mute state, especially after link re-establishment + * with HDMI 2.0 scrambling enabled. + */ + if (enable && pipe_ctx->stream_res.tg->funcs->is_tg_enabled(pipe_ctx->stream_res.tg)) { + int i; + + pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); + for (i = 0; i < 3; i++) { + pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VBLANK); + pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); + } + } + } } enum audio_dto_source translate_to_dto_source(enum controller_id crtc_id) -- cgit v1.2.3 From f327e389c07cfc3a2f6ff54f6214e1a52d457edc Mon Sep 17 00:00:00 2001 From: George Zhang Date: Thu, 16 Jul 2026 17:00:01 -0400 Subject: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. If num_mcaches or mvmpg_width/height is zero, return a false. Callers will propagate the failure as a rejected mode, which prevents the panic. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5302 Reviewed-by: Sun peng (Leo) Li Reviewed-by: Dillon Varone Signed-off-by: George Zhang Signed-off-by: Fangzhi Zuo Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) Cc: stable@vger.kernel.org --- .../dml21/src/dml2_core/dml2_core_dcn4_calcs.c | 31 +++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_core/dml2_core_dcn4_calcs.c b/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_core/dml2_core_dcn4_calcs.c index f338e733318e..b4e2264ef408 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_core/dml2_core_dcn4_calcs.c +++ b/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_core/dml2_core_dcn4_calcs.c @@ -2452,7 +2452,7 @@ static void calculate_mcache_row_bytes( DML_ASSERT(*p->num_mcaches > 0); } -static void calculate_mcache_setting( +static bool calculate_mcache_setting( struct dml2_core_internal_scratch *scratch, struct dml2_core_calcs_calculate_mcache_setting_params *p) { @@ -2478,7 +2478,7 @@ static void calculate_mcache_setting( *p->lc_comb_mcache = 0; if (!p->dcc_enable) - return; + return true; l->is_dual_plane = dml_is_420(p->source_format) || p->source_format == dml2_rgbe_alpha; @@ -2515,7 +2515,14 @@ static void calculate_mcache_setting( l->l_p.mvmpg_per_mcache_lb = &l->mvmpg_per_mcache_lb_l; calculate_mcache_row_bytes(scratch, &l->l_p); - DML_ASSERT(*p->num_mcaches_l > 0); + if (*p->num_mcaches_l == 0 || + (p->surf_vert ? l->mvmpg_height_l : l->mvmpg_width_l) == 0) { + DML_LOG_VERBOSE("DML::%s: degenerate luma viewport (num_mcaches_l=%u mvmpg_%s_l=%u) — mode not supported\n", + __func__, *p->num_mcaches_l, + p->surf_vert ? "height" : "width", + p->surf_vert ? l->mvmpg_height_l : l->mvmpg_width_l); + return false; + } if (l->is_dual_plane) { l->c_p.num_chans = p->num_chans; @@ -2551,7 +2558,14 @@ static void calculate_mcache_setting( l->c_p.mvmpg_per_mcache_lb = &l->mvmpg_per_mcache_lb_c; calculate_mcache_row_bytes(scratch, &l->c_p); - DML_ASSERT(*p->num_mcaches_c > 0); + if (*p->num_mcaches_c == 0 || + (p->surf_vert ? l->mvmpg_height_c : l->mvmpg_width_c) == 0) { + DML_LOG_VERBOSE("DML::%s: degenerate chroma viewport (num_mcaches_c=%u mvmpg_%s_c=%u) — mode not supported\n", + __func__, *p->num_mcaches_c, + p->surf_vert ? "height" : "width", + p->surf_vert ? l->mvmpg_height_c : l->mvmpg_width_c); + return false; + } } // Sharing for iMALL access @@ -2661,6 +2675,7 @@ static void calculate_mcache_setting( *p->mcache_shift_granularity_l = l->mvmpg_access_width_l; *p->mcache_shift_granularity_c = l->mvmpg_access_width_c; + return true; } static void calculate_mall_bw_overhead_factor( @@ -9457,7 +9472,10 @@ static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out calculate_mcache_setting_params->mall_comb_mcache_c = &mode_lib->ms.mall_comb_mcache_c[k]; calculate_mcache_setting_params->lc_comb_mcache = &mode_lib->ms.lc_comb_mcache[k]; - calculate_mcache_setting(&mode_lib->scratch, calculate_mcache_setting_params); + if (!calculate_mcache_setting(&mode_lib->scratch, calculate_mcache_setting_params)) { + mode_lib->ms.support.ModeSupport = false; + return false; + } } calculate_mall_bw_overhead_factor( @@ -10933,7 +10951,8 @@ static bool dml_core_mode_programming(struct dml2_core_calcs_mode_programming_ex calculate_mcache_setting_params->mall_comb_mcache_l = &mode_lib->mp.mall_comb_mcache_l[k]; calculate_mcache_setting_params->mall_comb_mcache_c = &mode_lib->mp.mall_comb_mcache_c[k]; calculate_mcache_setting_params->lc_comb_mcache = &mode_lib->mp.lc_comb_mcache[k]; - calculate_mcache_setting(&mode_lib->scratch, calculate_mcache_setting_params); + if (!calculate_mcache_setting(&mode_lib->scratch, calculate_mcache_setting_params)) + return false; } calculate_mall_bw_overhead_factor( -- cgit v1.2.3 From 000acb4ce7fb9feba3072ce468ad681f6585cd5d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 16 Feb 2026 09:32:53 -0500 Subject: drm/amd/display: check if dml21_add_phantom_plane() is successful Verify that the phantom plane was allocated to avoid a later segfault. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4970 Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources") Reviewed-by: Dillon Varone Signed-off-by: Fangzhi Zuo Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dml2_0/dml21/dml21_utils.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/dml21_utils.c b/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/dml21_utils.c index 835fece1d46a..50e445275b14 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/dml21_utils.c +++ b/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/dml21_utils.c @@ -359,14 +359,13 @@ void dml21_handle_phantom_streams_planes(const struct dc *dc, struct dc_state *c main_plane = main_stream_status->plane_states[dc_plane_index]; /* create phantom planes for subvp enabled plane */ - dml21_add_phantom_plane(dml_ctx, - dc, - context, - phantom_stream, - main_plane, - &dml_ctx->v21.mode_programming.programming->plane_programming[dml_plane_index]); - - phantoms_added = true; + if (dml21_add_phantom_plane(dml_ctx, + dc, + context, + phantom_stream, + main_plane, + &dml_ctx->v21.mode_programming.programming->plane_programming[dml_plane_index])) + phantoms_added = true; } } } -- cgit v1.2.3 From ff8bc5a68a9a70bdc38d61a72c7a49c56063f9d2 Mon Sep 17 00:00:00 2001 From: William Palacek Date: Wed, 22 Jul 2026 11:20:56 -0400 Subject: drm/amdkfd: hold event_mutex while checkpointing CRIU events kfd_criu_checkpoint_events() counts the entries in p->event_idr via kfd_get_num_events(), allocates an array sized to that count, and then walks the same IDR to fill it. Neither the count nor the walk holds p->event_mutex. The CRIU checkpoint caller holds only p->mutex. Event create and destroy (kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not take p->mutex, so a second thread in the same process can insert or remove events between the count and the walk. If an event is inserted, the walk iterates more entries than were counted and writes past the end of the ev_privs allocation; if an event is removed, the walk dereferences an entry that is being freed. Hold p->event_mutex across the count and the walk so both observe a consistent view of p->event_idr. The lock is released before copy_to_user(), which only touches the local buffer. The caller already holds p->mutex and the create/destroy paths never take p->mutex, so the p->mutex -> p->event_mutex order is not inverted and no deadlock is introduced. Fixes: 40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events") Signed-off-by: William Palacek Reviewed-by: Alysa Liu Signed-off-by: Alex Deucher (cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_events.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_events.c b/drivers/gpu/drm/amd/amdkfd/kfd_events.c index 78abfc0f7780..f705c61bdb1d 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_events.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_events.c @@ -548,15 +548,27 @@ int kfd_criu_checkpoint_events(struct kfd_process *p, int ret = 0; struct kfd_event *ev; uint32_t ev_id; + uint32_t num_events; - uint32_t num_events = kfd_get_num_events(p); + /* Serialize the count and the walk below against concurrent event + * create/destroy. Those paths take only p->event_mutex, not the + * p->mutex held by the CRIU checkpoint caller, so without this the + * event_idr can grow between kfd_get_num_events() and the loop and the + * walk writes past the ev_privs allocation. + */ + mutex_lock(&p->event_mutex); - if (!num_events) + num_events = kfd_get_num_events(p); + if (!num_events) { + mutex_unlock(&p->event_mutex); return 0; + } ev_privs = kvzalloc(num_events * sizeof(*ev_privs), GFP_KERNEL); - if (!ev_privs) + if (!ev_privs) { + mutex_unlock(&p->event_mutex); return -ENOMEM; + } idr_for_each_entry(&p->event_idr, ev, ev_id) { @@ -597,6 +609,8 @@ int kfd_criu_checkpoint_events(struct kfd_process *p, i++; } + mutex_unlock(&p->event_mutex); + ret = copy_to_user(user_priv_data + *priv_data_offset, ev_privs, num_events * sizeof(*ev_privs)); if (ret) { -- cgit v1.2.3 From 8ccb87b1c9be594fc2c36b0a4006a66f08dee1c8 Mon Sep 17 00:00:00 2001 From: Alan Swanson Date: Mon, 27 Jul 2026 17:01:26 +0100 Subject: drm/amd/display: Silence link_dpms I2C retimer failures Commit a4f01bf729b2 ("drm/amd/display: Refactor and fix link_dpms I2C") had also changed the "Set retimer failed" messages from DC_LOG_DEBUG() to DC_LOG_ERROR(). This unfortunately can create log spam. Change those back to DC_LOG_DEBUG() only. Fixes: a4f01bf729b2 ("drm/amd/display: Refactor and fix link_dpms I2C") Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5520 Signed-off-by: Alan Swanson Signed-off-by: Alex Deucher (cherry picked from commit da8609eef18b0a3490d0e1fa9440659fadc8194d) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/link/link_dpms.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c index 42e7f0e9b3ce..ca5997748799 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c @@ -384,7 +384,7 @@ static bool write_i2c_retimer_vga( for (size_t i = 0; i < ARRAY_SIZE(vga_data); i++) { if (!write_i2c_retimer_offset_value(link, address, vga_data[i][0], vga_data[i][1])) { - DC_LOG_ERROR("Set retimer failed, vga index: %zu\n", i); + DC_LOG_DEBUG("Set retimer failed, vga index: %zu\n", i); return false; } } @@ -405,7 +405,7 @@ static bool write_i2c_retimer_byte( return true; if (!write_i2c_retimer_offset_value(link, address, index, value)) { - DC_LOG_ERROR("Set retimer failed, 3g index: 0x%x, value: 0x%x\n", index, value); + DC_LOG_DEBUG("Set retimer failed, 3g index: 0x%x, value: 0x%x\n", index, value); return false; } @@ -421,14 +421,14 @@ static bool write_i2c_retimer_byte( if (!link_query_ddc_data( link->ddc, address, &offset, 1, &value, 1 )) { - DC_LOG_ERROR("Set retimer failed, link_query_ddc_data\n"); + DC_LOG_DEBUG("Set retimer failed, link_query_ddc_data\n"); return false; } } value |= apply_rx_tx_change; if (!write_i2c_retimer_offset_value(link, address, offset, value)) { - DC_LOG_ERROR("Set retimer failed, 3g offset: 0x%x, value: 0x%x\n", offset, value); + DC_LOG_DEBUG("Set retimer failed, 3g offset: 0x%x, value: 0x%x\n", offset, value); return false; } } @@ -449,7 +449,7 @@ static bool write_i2c_retimer_setting( uint8_t value = settings->reg_settings[i].i2c_reg_val; if (!write_i2c_retimer_byte(link, address, index, value)) { - DC_LOG_ERROR("Set retimer failed, index: %zu\n", i); + DC_LOG_DEBUG("Set retimer failed, index: %zu\n", i); return false; } } @@ -460,7 +460,7 @@ static bool write_i2c_retimer_setting( uint8_t value = settings->reg_settings_6g[i].i2c_reg_val; if (!write_i2c_retimer_byte(link, address, index, value)) { - DC_LOG_ERROR("Set retimer failed, 6g index: %zu\n", i); + DC_LOG_DEBUG("Set retimer failed, 6g index: %zu\n", i); return false; } } @@ -492,7 +492,7 @@ static bool write_i2c_default_retimer_setting( for (size_t i = 0; i < ARRAY_SIZE(data); i++) { if (!write_i2c_retimer_offset_value(link, address, data[i][0], data[i][1])) { - DC_LOG_ERROR("Set default retimer failed, index: %zu\n", i); + DC_LOG_DEBUG("Set default retimer failed, index: %zu\n", i); return false; } } @@ -524,7 +524,7 @@ static bool write_i2c_redriver_setting( ); if (!success) - DC_LOG_ERROR("Set redriver failed"); + DC_LOG_DEBUG("Set redriver failed"); return success; } -- cgit v1.2.3 From f931c54b241ce2f36bfc34955aec43a188276b8d Mon Sep 17 00:00:00 2001 From: Candice Li Date: Tue, 21 Jul 2026 21:38:58 +0800 Subject: drm/amdgpu: restore UMD profile pstate after runtime resume Runtime suspend runs GFX hw_fini and clears perfmon clock gating while the UMD profile DPM level remains set in software. Re-apply stable pstate after a successful runtime resume when a profile mode is active. Signed-off-by: Candice Li Reviewed-by: Hawking Zhang Reviewed-by: Yang Wang Signed-off-by: Alex Deucher (cherry picked from commit 138531c8850cc247aa12b104bb29ea387bcdcbb1) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 4c0c77eafbd1..1aed121f4ddb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -2908,6 +2908,19 @@ static int amdgpu_pmops_runtime_suspend(struct device *dev) return 0; } +static void amdgpu_restore_umd_profile_pstate_after_runpm(struct amdgpu_device *adev) +{ + enum amd_dpm_forced_level level; + uint32_t profile_mode_mask = AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD | + AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK | + AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK | + AMD_DPM_FORCED_LEVEL_PROFILE_PEAK; + + level = amdgpu_dpm_get_performance_level(adev); + if (level & profile_mode_mask) + amdgpu_asic_update_umd_stable_pstate(adev, true); +} + static int amdgpu_pmops_runtime_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); @@ -2952,6 +2965,8 @@ static int amdgpu_pmops_runtime_resume(struct device *dev) if (adev->pm.rpm_mode == AMDGPU_RUNPM_PX) drm_dev->switch_power_state = DRM_SWITCH_POWER_ON; + + amdgpu_restore_umd_profile_pstate_after_runpm(adev); adev->in_runpm = false; return 0; } -- cgit v1.2.3 From 1849a64165ccc23d3e5fc22b8be19227c21c1871 Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Mon, 27 Jul 2026 12:23:17 +0800 Subject: drm/amd/pm: use milliwatts for GPU power sensors GPU average and input power backends report a mix of whole watts, milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited from the legacy PowerPlay sensor format. Milliwatts are a more natural unit for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot distinguish these formats, and converting native milliwatts through Q24.8 also loses precision. Use milliwatts as the internal unit across all PPT and PowerPlay backends. Decode Q24.8 only at the legacy smu7 input boundary and encode it only for the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the sensor ioctl one unambiguous unit while preserving the format used by UMR. Fixes: 5b79d0482f3c ("drm/amd/pp: Remove struct pp_gpu_power") Fixes: 01992b121fb6 ("drm/amd/pm: fix amdgpu_pm_info power display units") Signed-off-by: Yang Wang Reviewed-by: Kenneth Feng Reported-by: Lars Nieradzik Signed-off-by: Alex Deucher (cherry picked from commit 757ba0790bafec47a507e9662bf380f2e027d420) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 9 +++++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 4 ++-- drivers/gpu/drm/amd/include/kgd_pp_interface.h | 6 ++++-- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 8 +++----- drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c | 4 ++-- drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c | 4 ++-- drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c | 2 +- drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c | 5 +++-- drivers/gpu/drm/amd/pm/powerplay/inc/hwmgr.h | 5 +++++ drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c | 2 +- drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c | 6 ++---- drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 8 ++++---- drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 7 ++++--- drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c | 9 +++------ drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c | 5 +++-- drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 3 ++- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 2 +- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_12_ppt.c | 3 ++- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 4 ++-- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_5_ppt.c | 2 +- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c | 3 ++- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c | 2 +- drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c | 2 +- drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 3 +-- drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c | 2 +- drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c | 3 +-- drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_8_ppt.c | 3 ++- 27 files changed, 65 insertions(+), 51 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 662ec01961f4..df2588642817 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -43,6 +43,11 @@ #if defined(CONFIG_DEBUG_FS) +/* Encode milliwatts in the raw Q24.8 sensor report format used by UMR. */ +#define AMDGPU_DEBUGFS_PWR_MW_TO_Q24_8(power_mw) \ + DIV_ROUND_CLOSEST_ULL((u64)(power_mw) * BIT(8), \ + MILLIWATT_PER_WATT) + /** * amdgpu_debugfs_process_reg_op - Handle MMIO register reads/writes * @@ -1104,6 +1109,10 @@ static ssize_t amdgpu_debugfs_sensor_read(struct file *f, char __user *buf, return r; } + if (idx == AMDGPU_PP_SENSOR_GPU_AVG_POWER || + idx == AMDGPU_PP_SENSOR_GPU_INPUT_POWER) + values[0] = AMDGPU_DEBUGFS_PWR_MW_TO_Q24_8(values[0]); + if (size > valuesize) { amdgpu_virt_disable_access_debugfs(adev); return -EINVAL; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 71272f40feef..8bb9c198ddec 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -1210,7 +1210,7 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) return -EINVAL; } } - ui32 >>= 8; + ui32 /= MILLIWATT_PER_WATT; break; case AMDGPU_INFO_SENSOR_GPU_INPUT_POWER: /* get input GPU power */ @@ -1219,7 +1219,7 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) (void *)&ui32, &ui32_size)) { return -EINVAL; } - ui32 >>= 8; + ui32 /= MILLIWATT_PER_WATT; break; case AMDGPU_INFO_SENSOR_VDDNB: /* get VDDNB in millivolts */ diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h index 6371f292f2d8..606d48115301 100644 --- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h +++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h @@ -24,6 +24,8 @@ #ifndef __KGD_PP_INTERFACE_H__ #define __KGD_PP_INTERFACE_H__ +#include + extern const struct amdgpu_ip_block_version pp_smu_ip_block; extern const struct amdgpu_ip_block_version smu_v11_0_ip_block; extern const struct amdgpu_ip_block_version smu_v12_0_ip_block; @@ -150,8 +152,8 @@ enum amd_pp_sensors { AMDGPU_PP_SENSOR_MEM_TEMP, AMDGPU_PP_SENSOR_VCE_POWER, AMDGPU_PP_SENSOR_UVD_POWER, - AMDGPU_PP_SENSOR_GPU_AVG_POWER, - AMDGPU_PP_SENSOR_GPU_INPUT_POWER, + AMDGPU_PP_SENSOR_GPU_AVG_POWER, /* milliwatts */ + AMDGPU_PP_SENSOR_GPU_INPUT_POWER, /* milliwatts */ AMDGPU_PP_SENSOR_SS_APU_SHARE, AMDGPU_PP_SENSOR_SS_DGPU_SHARE, AMDGPU_PP_SENSOR_STABLE_PSTATE_SCLK, diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c index 763947fbf16f..85b089a3dc41 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c @@ -41,8 +41,6 @@ #define DEVICE_ATTR_IS(_name) (attr_id == device_attr_id__##_name) -#define power_2_mwatt(power) (((power) >> 8) * 1000 + ((power) & 0xff)) - struct od_attribute { struct kobj_attribute attribute; struct list_head entry; @@ -3351,7 +3349,7 @@ static int amdgpu_hwmon_get_power(struct device *dev, return r; /* convert to microwatts */ - return power_2_mwatt(query) * 1000; + return query * 1000; } static ssize_t amdgpu_hwmon_show_power_avg(struct device *dev, @@ -4919,7 +4917,7 @@ static int amdgpu_debugfs_pm_info_pp(struct seq_file *m, struct amdgpu_device *a seq_printf(m, "\t%u mV (VDDNB)\n", value); size = sizeof(uint32_t); if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_GPU_AVG_POWER, (void *)&query, &size)) { - mwatt = power_2_mwatt(query); + mwatt = query; centiwatt = DIV_ROUND_CLOSEST(mwatt, 10); if (adev->flags & AMD_IS_APU) seq_printf(m, "\t%u.%02u W (average SoC including CPU)\n", centiwatt / 100, centiwatt % 100); @@ -4928,7 +4926,7 @@ static int amdgpu_debugfs_pm_info_pp(struct seq_file *m, struct amdgpu_device *a } size = sizeof(uint32_t); if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_GPU_INPUT_POWER, (void *)&query, &size)) { - mwatt = power_2_mwatt(query); + mwatt = query; centiwatt = DIV_ROUND_CLOSEST(mwatt, 10); if (adev->flags & AMD_IS_APU) seq_printf(m, "\t%u.%02u W (current SoC including CPU)\n", centiwatt / 100, centiwatt % 100); diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c index bc82ba2e4c9b..f8a5648095d1 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c @@ -4062,7 +4062,7 @@ static int smu7_get_gpu_power(struct pp_hwmgr *hwmgr, u32 *query) (adev->asic_type != CHIP_FIJI) && (adev->asic_type != CHIP_TONGA)) { smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetCurrPkgPwr, 0, &tmp); - *query = tmp; + *query = PP_PWR_Q24_8_TO_MW(tmp); if (tmp != 0) return 0; @@ -4081,7 +4081,7 @@ static int smu7_get_gpu_power(struct pp_hwmgr *hwmgr, u32 *query) if (tmp != 0) break; } - *query = tmp; + *query = PP_PWR_Q24_8_TO_MW(tmp); return 0; } diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c index 4b92b52aba2b..c283309efe87 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c @@ -3934,8 +3934,8 @@ static int vega10_get_gpu_power(struct pp_hwmgr *hwmgr, if (ret) return ret; - /* SMC returning actual watts, keep consistent with legacy asics, low 8 bit as 8 fractional bits */ - *query = value << 8; + /* SMC returns whole Watts, while power sensors use milliwatts. */ + *query = value * MILLIWATT_PER_WATT; return 0; } diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c index 69a9074058ce..b466b08e4a67 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c @@ -1419,7 +1419,7 @@ static int vega12_get_gpu_power(struct pp_hwmgr *hwmgr, uint32_t *query) if (ret) return ret; - *query = metrics_table.CurrSocketPower << 8; + *query = metrics_table.CurrSocketPower * MILLIWATT_PER_WATT; return ret; } diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c index 7b8f4c1b80eb..e9c194056e32 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c @@ -2154,12 +2154,13 @@ static int vega20_get_gpu_power(struct pp_hwmgr *hwmgr, int idx, switch (idx) { case AMDGPU_PP_SENSOR_GPU_AVG_POWER: if (hwmgr->smu_version == 0x282e00) - *query = metrics_table.AverageSocketPower << 8; + *query = metrics_table.AverageSocketPower * + MILLIWATT_PER_WATT; else ret = -EOPNOTSUPP; break; case AMDGPU_PP_SENSOR_GPU_INPUT_POWER: - *query = metrics_table.CurrSocketPower << 8; + *query = metrics_table.CurrSocketPower * MILLIWATT_PER_WATT; break; } diff --git a/drivers/gpu/drm/amd/pm/powerplay/inc/hwmgr.h b/drivers/gpu/drm/amd/pm/powerplay/inc/hwmgr.h index ca71efaa1656..368200f7cf16 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/inc/hwmgr.h +++ b/drivers/gpu/drm/amd/pm/powerplay/inc/hwmgr.h @@ -35,6 +35,11 @@ struct pp_hwmgr; struct phm_fan_speed_info; struct pp_atomctrl_voltage_table; +/* Decode legacy unsigned Q24.8 watts to internal milliwatts. */ +#define PP_PWR_Q24_8_TO_MW(power) \ + DIV_ROUND_CLOSEST_ULL((u64)(power) * MILLIWATT_PER_WATT, \ + BIT(8)) + #define VOLTAGE_SCALE 4 #define VOLTAGE_VID_OFFSET_SCALE1 625 #define VOLTAGE_VID_OFFSET_SCALE2 100 diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c index 54d3dba7d354..cfad8cd74773 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c @@ -658,7 +658,7 @@ static int arcturus_get_smu_metrics_data(struct smu_context *smu, *value = metrics->VcnActivityPercentage; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = metrics->AverageSocketPower << 8; + *value = metrics->AverageSocketPower * MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->TemperatureEdge * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c index e6e009df9840..bb9620666dae 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c @@ -158,12 +158,10 @@ cyan_skillfish_get_smu_metrics_data(struct smu_context *smu, *value = metrics->Current.MemclkFrequency; break; case METRICS_CURR_SOCKETPOWER: - *value = (metrics->Current.CurrentSocketPower << 8) / - 1000; + *value = metrics->Current.CurrentSocketPower; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = (metrics->Average.CurrentSocketPower << 8) / - 1000; + *value = metrics->Average.CurrentSocketPower; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->Current.GfxTemperature / 100 * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c index cd0457e13f54..6dfc3b585c6b 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c @@ -602,7 +602,7 @@ static int navi10_get_legacy_smu_metrics_data(struct smu_context *smu, *value = metrics->AverageUclkActivity; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = metrics->AverageSocketPower << 8; + *value = metrics->AverageSocketPower * MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->TemperatureEdge * @@ -691,7 +691,7 @@ static int navi10_get_smu_metrics_data(struct smu_context *smu, *value = metrics->AverageUclkActivity; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = metrics->AverageSocketPower << 8; + *value = metrics->AverageSocketPower * MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->TemperatureEdge * @@ -777,7 +777,7 @@ static int navi12_get_legacy_smu_metrics_data(struct smu_context *smu, *value = metrics->AverageUclkActivity; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = metrics->AverageSocketPower << 8; + *value = metrics->AverageSocketPower * MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->TemperatureEdge * @@ -866,7 +866,7 @@ static int navi12_get_smu_metrics_data(struct smu_context *smu, *value = metrics->AverageUclkActivity; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = metrics->AverageSocketPower << 8; + *value = metrics->AverageSocketPower * MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->TemperatureEdge * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c index f799e489b481..dccca6ddd5ad 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c @@ -855,9 +855,10 @@ static int sienna_cichlid_get_smu_metrics_data(struct smu_context *smu, metrics->AverageUclkActivity; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = use_metrics_v3 ? metrics_v3->AverageSocketPower << 8 : - use_metrics_v2 ? metrics_v2->AverageSocketPower << 8 : - metrics->AverageSocketPower << 8; + *value = use_metrics_v3 ? metrics_v3->AverageSocketPower : + use_metrics_v2 ? metrics_v2->AverageSocketPower : + metrics->AverageSocketPower; + *value *= MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_EDGE: *value = (use_metrics_v3 ? metrics_v3->TemperatureEdge : diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c index c54675b00a96..3e3c68448ba9 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c @@ -318,8 +318,7 @@ static int vangogh_get_legacy_smu_metrics_data(struct smu_context *smu, *value = metrics->UvdActivity / 100; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = (metrics->CurrentSocketPower << 8) / - 1000 ; + *value = metrics->CurrentSocketPower; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->GfxTemperature / 100 * @@ -387,12 +386,10 @@ static int vangogh_get_smu_metrics_data(struct smu_context *smu, *value = metrics->Current.UvdActivity; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = (metrics->Average.CurrentSocketPower << 8) / - 1000; + *value = metrics->Average.CurrentSocketPower; break; case METRICS_CURR_SOCKETPOWER: - *value = (metrics->Current.CurrentSocketPower << 8) / - 1000; + *value = metrics->Current.CurrentSocketPower; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->Current.GfxTemperature / 100 * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c index 75335da224c7..175c44190caa 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c @@ -1215,9 +1215,10 @@ static int renoir_get_smu_metrics_data(struct smu_context *smu, ((amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(12, 0, 0)) && (adev->pm.fw_version >= 0x373200))) - *value = metrics->CurrentSocketPower << 8; + *value = metrics->CurrentSocketPower * + MILLIWATT_PER_WATT; else - *value = (metrics->CurrentSocketPower << 8) / 1000; + *value = metrics->CurrentSocketPower; break; case METRICS_TEMPERATURE_EDGE: *value = (metrics->GfxTemperature / 100) * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c index 9d8b1227388f..18c0b43b93b9 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c @@ -677,7 +677,8 @@ static int aldebaran_get_smu_metrics_data(struct smu_context *smu, case METRICS_AVERAGE_SOCKETPOWER: /* Valid power data is available only from primary die */ if (aldebaran_is_primary(smu)) - *value = metrics->AverageSocketPower << 8; + *value = metrics->AverageSocketPower * + MILLIWATT_PER_WATT; else ret = -EOPNOTSUPP; break; diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c index acbd7046d8a5..0be34fbdac26 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c @@ -807,7 +807,7 @@ static int smu_v13_0_0_get_smu_metrics_data(struct smu_context *smu, metrics->Vcn1ActivityPercentage); break; case METRICS_AVERAGE_SOCKETPOWER: - *value = metrics->AverageSocketPower << 8; + *value = metrics->AverageSocketPower * MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->AvgTemperature[TEMP_EDGE] * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_12_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_12_ppt.c index fe929bd89058..8d476a60d62f 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_12_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_12_ppt.c @@ -434,7 +434,8 @@ int smu_v13_0_12_get_smu_metrics_data(struct smu_context *smu, *value = SMUQ10_ROUND(metrics->DramBandwidthUtilization); break; case METRICS_CURR_SOCKETPOWER: - *value = SMUQ10_ROUND(metrics->SocketPower) << 8; + *value = SMUQ10_ROUND(metrics->SocketPower) * + MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_HOTSPOT: *value = SMUQ10_ROUND(metrics->MaxSocketTemperature) * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c index ba91bf590eed..a9d558f5b739 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c @@ -338,10 +338,10 @@ static int smu_v13_0_4_get_smu_metrics_data(struct smu_context *smu, *value = metrics->UvdActivity / 100; break; case METRICS_AVERAGE_SOCKETPOWER: - *value = (metrics->AverageSocketPower << 8) / 1000; + *value = metrics->AverageSocketPower; break; case METRICS_CURR_SOCKETPOWER: - *value = (metrics->CurrentSocketPower << 8) / 1000; + *value = metrics->CurrentSocketPower; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->GfxTemperature / 100 * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_5_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_5_ppt.c index 27372a60e83d..f95b15af436d 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_5_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_5_ppt.c @@ -295,7 +295,7 @@ static int smu_v13_0_5_get_smu_metrics_data(struct smu_context *smu, *value = metrics->UvdActivity / 100; break; case METRICS_CURR_SOCKETPOWER: - *value = (metrics->CurrentSocketPower << 8) / 1000; + *value = metrics->CurrentSocketPower; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->GfxTemperature / 100 * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c index b12388134489..41608574bc61 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c @@ -1321,7 +1321,8 @@ static int smu_v13_0_6_get_smu_metrics_data(struct smu_context *smu, *value = SMUQ10_ROUND(GET_METRIC_FIELD(DramBandwidthUtilization, version)); break; case METRICS_CURR_SOCKETPOWER: - *value = SMUQ10_ROUND(GET_METRIC_FIELD(SocketPower, version)) << 8; + *value = SMUQ10_ROUND(GET_METRIC_FIELD(SocketPower, version)) * + MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_HOTSPOT: *value = SMUQ10_ROUND(GET_METRIC_FIELD(MaxSocketTemperature, version)) * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c index 42c9ceeb4f7d..5d11ed8be4c3 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c @@ -817,7 +817,7 @@ static int smu_v13_0_7_get_smu_metrics_data(struct smu_context *smu, *value = smu_safe_u16_nn(metrics->AverageUclkActivity); break; case METRICS_AVERAGE_SOCKETPOWER: - *value = metrics->AverageSocketPower << 8; + *value = metrics->AverageSocketPower * MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->AvgTemperature[TEMP_EDGE] * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c index 7bf88ffd311b..edc3fedca9f8 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c @@ -372,7 +372,7 @@ static int yellow_carp_get_smu_metrics_data(struct smu_context *smu, *value = metrics->UvdActivity / 100; break; case METRICS_CURR_SOCKETPOWER: - *value = (metrics->CurrentSocketPower << 8) / 1000; + *value = metrics->CurrentSocketPower; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->GfxTemperature / 100 * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c index 3d73f2050bbe..568665265a13 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c @@ -312,8 +312,7 @@ static int smu_v14_0_0_get_smu_metrics_data(struct smu_context *smu, break; case METRICS_AVERAGE_SOCKETPOWER: case METRICS_CURR_SOCKETPOWER: - *value = (metrics->SocketPower / 1000 << 8) + - (metrics->SocketPower % 1000 / 10); + *value = metrics->SocketPower; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->GfxTemperature / 100 * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c index a6a88e7b2668..bd054cbfbae0 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c @@ -695,7 +695,7 @@ static int smu_v14_0_2_get_smu_metrics_data(struct smu_context *smu, metrics->Vcn1ActivityPercentage); break; case METRICS_AVERAGE_SOCKETPOWER: - *value = metrics->AverageSocketPower << 8; + *value = metrics->AverageSocketPower * MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->AvgTemperature[TEMP_EDGE] * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c index faa7d661f3bf..0da1ffb3a567 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_0_ppt.c @@ -378,8 +378,7 @@ static int smu_v15_0_0_get_smu_metrics_data(struct smu_context *smu, break; case METRICS_AVERAGE_SOCKETPOWER: case METRICS_CURR_SOCKETPOWER: - *value = (metrics->SocketPower / 1000 << 8) + - (metrics->SocketPower % 1000 / 10); + *value = metrics->SocketPower; break; case METRICS_TEMPERATURE_EDGE: *value = metrics->GfxTemperature / 100 * diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_8_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_8_ppt.c index 2105a1d7bb34..118eda5429ff 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_8_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0_8_ppt.c @@ -411,7 +411,8 @@ static int smu_v15_0_8_get_smu_metrics_data(struct smu_context *smu, *value = SMUQ10_ROUND(metrics->DramBandwidthUtilization); break; case METRICS_CURR_SOCKETPOWER: - *value = SMUQ10_ROUND(metrics->SocketPower) << 8; + *value = SMUQ10_ROUND(metrics->SocketPower) * + MILLIWATT_PER_WATT; break; case METRICS_TEMPERATURE_HOTSPOT: *value = SMUQ10_ROUND(metrics->MaxSocketTemperature) * -- cgit v1.2.3 From 5e70f6804b4d6256058c360b10e044ee04ea4a4e Mon Sep 17 00:00:00 2001 From: Harkirat Gill Date: Mon, 27 Jul 2026 14:37:56 -0400 Subject: drm/amdgpu: cap GTT size to physical RAM on APUs On APUs, the GTT pool is backed by system RAM, but its size is not bound to the non-carveout memory that actually backs it. A user can end up with GTT + VRAM exceeding total physical memory through the following sequence: - Have a large non-carveout memory space (~128GB) and accordingly set a large GTT (~100GB) via the ttm module parameter. - Lower the non-carveout memory space in BIOS by increasing the UMA Frame Buffer Size (VRAM) to 64GB. - The previously set GTT value (~100GB) persists, even though the new non-carveout space (64GB) can no longer back it. This leads to a case where kernel reports GTT (100GB) + VRAM (64GB) despite the sum being greater than total physical memory (128GB). Cap the GTT size to totalram_pages() on APUs. totalram_pages() already excludes the VRAM carveout, so the resulting GTT can never exceed the system RAM that actually backs it. Signed-off-by: Harkirat Gill Reviewed-by: David Francis Assisted-by: Claude:claude-opus-4 Signed-off-by: Alex Deucher (cherry picked from commit 5dafdd649280c7dc6c22c8f877da3f54fcc441e1) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index eb8bbfc7e6d9..5fc91f45db5b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -2173,6 +2173,18 @@ int amdgpu_ttm_init(struct amdgpu_device *adev) gtt_size = configured_size; } + /* Cap GTT so that it does not exceed total physical RAM. */ + if (adev->flags & AMD_IS_APU) { + u64 phys_ram = (u64)totalram_pages() << PAGE_SHIFT; + + if (gtt_size > phys_ram) { + gtt_size = phys_ram; + dev_info(adev->dev, + "Capping GTT to %uM to not exceed available system memory\n", + (unsigned int)(gtt_size / (1024 * 1024))); + } + } + /* Initialize GTT memory pool */ r = amdgpu_gtt_mgr_init(adev, gtt_size); if (r) { -- cgit v1.2.3 From 114b42507b6a23d9d24e24e4ef165233332c64d4 Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Thu, 23 Jul 2026 06:25:48 +0200 Subject: drm/amd/display: use proper context for logging MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The same as the rest of the code, get_ss_info_from_atombios() uses calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is initialized only later in calc_pll_max_vco_construct(). Therefore, any output using DC_LOG_SYNC() leads to a NULL pointer deference in get_ss_info_from_atombios(). According to Sashiko, the very same problem exists in dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too. To avoid accessing the NULL context, use clk_src->base.ctx->logger everywhere. That context in base is initialized earlier in dce110_clk_src_construct() and dce112_clk_src_construct(). Before get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions above are actually called. This is done by redefining DC_LOGGER to CTX->logger. Before: dce110_clk_src_construct() did: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM -> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx After: dce110_clk_src_construct() does: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses clk_src->base.ctx Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175 Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/ Fixes: 1296423bf23c ("drm/amd/display: define DC_LOGGER for logger") Reviewed-by: Bhawanpreet Lakha Signed-off-by: Jiri Slaby (SUSE) Cc: Lakha, Bhawanpreet Cc: Harry Wentland Cc: Leo Li Cc: Rodrigo Siqueira Cc: Alex Deucher Cc: "Christian König" Cc: David Airlie Cc: Simona Vetter Cc: amd-gfx@lists.freedesktop.org Signed-off-by: Alex Deucher (cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0) Cc: stable@vger.kernel.org --- .../gpu/drm/amd/display/dc/dce/dce_clock_source.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c index ecb8493ec523..8e3862f6dac2 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c @@ -45,9 +45,7 @@ clk_src->base.ctx #define DC_LOGGER \ - calc_pll_cs->ctx->logger -#define DC_LOGGER_INIT() \ - struct calc_pll_clock_source *calc_pll_cs = &clk_src->calc_pll + CTX->logger #undef FN #define FN(reg_name, field_name) \ @@ -287,6 +285,7 @@ static bool calc_pll_dividers_in_range( } static uint32_t calculate_pixel_clock_pll_dividers( + struct dce110_clk_src *clk_src, struct calc_pll_clock_source *calc_pll_cs, struct pll_settings *pll_settings) { @@ -474,7 +473,7 @@ static uint32_t dce110_get_pix_clk_dividers_helper ( { uint32_t field = 0; uint32_t pll_calc_error = MAX_PLL_CALC_ERROR; - DC_LOGGER_INIT(); + /* Check if reference clock is external (not pcie/xtalin) * HW Dce80 spec: * 00 - PCIE_REFCLK, 01 - XTALIN, 02 - GENERICA, 03 - GENERICB @@ -517,12 +516,14 @@ static uint32_t dce110_get_pix_clk_dividers_helper ( /*Calculate Dividers by HDMI object, no SS case or SS case */ pll_calc_error = calculate_pixel_clock_pll_dividers( + clk_src, &clk_src->calc_pll_hdmi, pll_settings); else /*Calculate Dividers by default object, no SS case or SS case */ pll_calc_error = calculate_pixel_clock_pll_dividers( + clk_src, &clk_src->calc_pll, pll_settings); @@ -568,7 +569,6 @@ static uint32_t dce110_get_pix_clk_dividers( { struct dce110_clk_src *clk_src = TO_DCE110_CLK_SRC(cs); uint32_t pll_calc_error = MAX_PLL_CALC_ERROR; - DC_LOGGER_INIT(); if (pix_clk_params == NULL || pll_settings == NULL || pix_clk_params->requested_pix_clk_100hz == 0) { @@ -600,7 +600,6 @@ static uint32_t dce112_get_pix_clk_dividers( struct pll_settings *pll_settings) { struct dce110_clk_src *clk_src = TO_DCE110_CLK_SRC(cs); - DC_LOGGER_INIT(); if (pix_clk_params == NULL || pll_settings == NULL || pix_clk_params->requested_pix_clk_100hz == 0) { @@ -1442,8 +1441,6 @@ static uint32_t dcn3_get_pix_clk_dividers( unsigned long long actual_pix_clk_100Hz = pix_clk_params ? pix_clk_params->requested_pix_clk_100hz : 0; struct dce110_clk_src *clk_src = TO_DCE110_CLK_SRC(cs); - DC_LOGGER_INIT(); - if (pix_clk_params == NULL || pll_settings == NULL || pix_clk_params->requested_pix_clk_100hz == 0) { DC_LOG_ERROR( @@ -1513,7 +1510,6 @@ static const struct clock_source_funcs dce110_clk_src_funcs = { .get_dp_dto_frequency_100hz = get_dp_dto_frequency_100hz }; - static void get_ss_info_from_atombios( struct dce110_clk_src *clk_src, enum as_signal_type as_signal, @@ -1526,7 +1522,7 @@ static void get_ss_info_from_atombios( struct spread_spectrum_info *ss_info_cur; struct spread_spectrum_data *ss_data_cur; uint32_t i; - DC_LOGGER_INIT(); + if (ss_entries_num == NULL) { DC_LOG_SYNC( "Invalid entry !!!\n"); @@ -1657,6 +1653,7 @@ static void ss_info_from_atombios_create( } static bool calc_pll_max_vco_construct( + struct dce110_clk_src *clk_src, struct calc_pll_clock_source *calc_pll_cs, struct calc_pll_clock_source_init_data *init_data) { @@ -1808,6 +1805,7 @@ bool dce110_clk_src_construct( ss_info_from_atombios_create(clk_src); if (!calc_pll_max_vco_construct( + clk_src, &clk_src->calc_pll, &calc_pll_cs_init_data)) { ASSERT_CRITICAL(false); @@ -1822,7 +1820,7 @@ bool dce110_clk_src_construct( if (!calc_pll_max_vco_construct( - &clk_src->calc_pll_hdmi, &calc_pll_cs_init_data_hdmi)) { + clk_src, &clk_src->calc_pll_hdmi, &calc_pll_cs_init_data_hdmi)) { ASSERT_CRITICAL(false); goto unexpected_failure; } -- cgit v1.2.3 From 1833ce36b35426504c64600c94f322437ea44bb2 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 16 Jul 2026 06:42:18 -0700 Subject: mm: memcg: initialize *locked in memcg1_oom_prepare() stub mem_cgroup_oom() passes an uninitialized "locked" to memcg1_oom_prepare() and reads it back in memcg1_oom_finish(): bool locked, ret; ... if (!memcg1_oom_prepare(memcg, &locked)) return false; ret = mem_cgroup_out_of_memory(memcg, mask, order); memcg1_oom_finish(memcg, locked); This relies on memcg1_oom_prepare() setting *locked whenever it returns true. The CONFIG_MEMCG_V1=y version does, but the stub used when CONFIG_MEMCG_V1=n returns true without touching *locked, so memcg1_oom_finish() consumes an uninitialized value. On a memcg OOM this is reported by UBSAN: UBSAN: invalid-load in mm/memcontrol.c:1932:27 load of value 0 is not a valid value for type 'bool' (aka '_Bool') Initialize *locked to false in the stub; with cgroup v1 compiled out there is no OOM lock to take. Link: https://lore.kernel.org/20260716-memcg-oom-uninit-locked-v2-1-63631d878eb4@debian.org Fixes: e93d4166b40a ("mm: memcg: put cgroup v1-specific code under a config option") Signed-off-by: Breno Leitao Reviewed-by: Joshua Hahn Acked-by: Johannes Weiner Reviewed-by: SeongJae Park Acked-by: Shakeel Butt Cc: Michal Hocko Cc: Muchun Song Cc: Roman Gushchin Cc: Shakeel Butt Cc: Signed-off-by: Andrew Morton --- mm/memcontrol-v1.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/mm/memcontrol-v1.h b/mm/memcontrol-v1.h index f92f81108d5e..4fa6e2bc8413 100644 --- a/mm/memcontrol-v1.h +++ b/mm/memcontrol-v1.h @@ -107,7 +107,11 @@ static inline void memcg1_remove_from_trees(struct mem_cgroup *memcg) {} static inline void memcg1_soft_limit_reset(struct mem_cgroup *memcg) {} static inline void memcg1_css_offline(struct mem_cgroup *memcg) {} -static inline bool memcg1_oom_prepare(struct mem_cgroup *memcg, bool *locked) { return true; } +static inline bool memcg1_oom_prepare(struct mem_cgroup *memcg, bool *locked) +{ + *locked = false; + return true; +} static inline void memcg1_oom_finish(struct mem_cgroup *memcg, bool locked) {} static inline void memcg1_oom_recover(struct mem_cgroup *memcg) {} -- cgit v1.2.3 From 4bd0c3515a041d9aa1558c4e8ea0efdb56509f9a Mon Sep 17 00:00:00 2001 From: Nico Pache Date: Fri, 17 Jul 2026 00:44:59 -0600 Subject: mm: decrement MTHP_STAT_NR_ANON in free_zone_device_folio() Patch series "mm: fix PMD level mTHP accounting bugs", v2. While running selftests I noticed the PMD level per-mTHP stats (nr_anon) remained elevated after each run. After further investigation I noticed this accounting error occurs for both the migration.private_anon_htlb_test and the HMM tests. In the HMM case this is due to folio_add_new_anon_rmap() incrementing the mTHP stats, but never containing a corresponding decrement in free_zone_device_folio(). We solve this by making sure to decrement the counter when freeing device memory. In the migration case, we are incrementing this counter without first checking whether this folio is a hugetlb folio, which relies on a separate accounting system. We solve this by adding the proper hugetlb check before incrementing this counter. With these changes in place, the two tests no longer cause elevated PMD level accounting issues. This patch (of 2): When a zone device folio is mapped as anonymous, folio_add_new_anon_rmap() increments MTHP_STAT_NR_ANON. The corresponding decrement lives in __free_pages_prepare() in page_alloc.c, but zone device folios are freed via free_zone_device_folio() which never calls __free_pages_prepare(). This causes nr_anon to remain permanently elevated after zone device folios are freed. Add the missing mod_mthp_stat() decrement to free_zone_device_folio() so that the counter is properly balanced. Link: https://lore.kernel.org/20260717064502.1980173-1-npache@redhat.com Link: https://lore.kernel.org/20260717064502.1980173-2-npache@redhat.com Fixes: 5d65c8d758f2 ("mm: count the number of anonymous THPs per size") Co-developed-by: David Hildenbrand Signed-off-by: David Hildenbrand Signed-off-by: Nico Pache Reviewed-by: Zi Yan Cc: Alistair Popple Cc: Barry Song Cc: Byungchul Park Cc: Gregory Price Cc: "Huang, Ying" Cc: Joshua Hahn Cc: Lorenzo Stoakes Cc: Matthew Brost Cc: Matthew Wilcox (Oracle) Cc: Oscar Salvador Cc: Rakie Kim Cc: Baolin Wang Signed-off-by: Andrew Morton --- mm/memremap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/memremap.c b/mm/memremap.c index 81766d822400..accba23aef28 100644 --- a/mm/memremap.c +++ b/mm/memremap.c @@ -425,6 +425,7 @@ void free_zone_device_folio(struct folio *folio) mem_cgroup_uncharge(folio); if (folio_test_anon(folio)) { + mod_mthp_stat(folio_order(folio), MTHP_STAT_NR_ANON, -1); for (i = 0; i < nr; i++) __ClearPageAnonExclusive(folio_page(folio, i)); } -- cgit v1.2.3 From d09a8fd521476950079ee01a1408e6f5b7a0aa3e Mon Sep 17 00:00:00 2001 From: Nico Pache Date: Fri, 17 Jul 2026 00:45:00 -0600 Subject: mm/migrate: exclude hugetlb folios from MTHP_STAT_NR_ANON accounting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit __folio_migrate_mapping() increments MTHP_STAT_NR_ANON for the destination folio when `folio_test_anon(folio) && folio_test_large(folio)` is true. However, hugetlb folios satisfy both conditions despite having a completely separate accounting system — they use hugetlb_add_anon_rmap() which does not touch mTHP stats, and their free path also bypasses the mTHP decrement in __free_pages_prepare(). This causes MTHP_STAT_NR_ANON to be incremented on each hugetlb migration without a corresponding decrement, permanently inflating the nr_anon counter. Add a !folio_test_hugetlb() check to __folio_migrate_mapping() so that only actual mTHP folios are counted. Link: https://lore.kernel.org/20260717064502.1980173-3-npache@redhat.com Fixes: 5d65c8d758f2 ("mm: count the number of anonymous THPs per size") Co-developed-by: David Hildenbrand Signed-off-by: David Hildenbrand Signed-off-by: Nico Pache Reviewed-by: Zi Yan Reviewed-by: Baolin Wang Cc: Alistair Popple Cc: Barry Song Cc: Byungchul Park Cc: Gregory Price Cc: "Huang, Ying" Cc: Joshua Hahn Cc: Lorenzo Stoakes Cc: Matthew Brost Cc: Matthew Wilcox (Oracle) Cc: Oscar Salvador Cc: Rakie Kim Signed-off-by: Andrew Morton --- mm/migrate.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index d9b23909d716..dd15a84b2a52 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -590,7 +590,8 @@ static int __folio_migrate_mapping(struct address_space *mapping, /* No turning back from here */ newfolio->index = folio->index; newfolio->mapping = folio->mapping; - if (folio_test_anon(folio) && folio_test_large(folio)) + if (folio_test_anon(folio) && folio_test_large(folio) && + !folio_test_hugetlb(folio)) mod_mthp_stat(folio_order(folio), MTHP_STAT_NR_ANON, 1); if (folio_test_swapbacked(folio)) __folio_set_swapbacked(newfolio); -- cgit v1.2.3 From 45ebe4540817cb540a59e4dc04014ac5dddc9990 Mon Sep 17 00:00:00 2001 From: Jiakai Xu Date: Thu, 16 Jul 2026 11:53:25 +0000 Subject: riscv/mm: use physical alignment for vmemmap_start_pfn RISC-V computes vmemmap_start_pfn by rounding phys_ram_base down to VMEMMAP_ADDR_ALIGN. That alignment must therefore be expressed in the physical-address domain. Commit 476849b0fba4 ("riscv/mm: align vmemmap to maximal folio size") attempted to account for the maximal folio alignment by feeding MAX_FOLIO_VMEMMAP_ALIGN directly into VMEMMAP_ADDR_ALIGN. However, MAX_FOLIO_VMEMMAP_ALIGN is measured in bytes of struct page storage, whereas VMEMMAP_ADDR_ALIGN is used to align a physical address. The mask-based compound_info encoding requires pfn_to_page(0) to be naturally aligned to MAX_FOLIO_VMEMMAP_ALIGN. Commit 9f94db4c7eaa ("mm/sparse: check memmap alignment for compound_info_has_mask()") added a check for that requirement and exposed the unit mismatch on systems such as QEMU virt, where the DRAM base is not aligned to MAX_FOLIO_NR_PAGES * PAGE_SIZE. Here is the log: [ 0.000000][ C0] ------------[ cut here ]------------ [ 0.000000][ C0] WARNING: mm/sparse.c:365 at sparse_init+0x58a/0x6fe, CPU#0: swapper/0 [ 0.000000][ C0] Modules linked in: [ 0.000000][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.2.0-rc3-g1d8304bdd65f #2 PREEMPT [ 0.000000][ C0] Hardware name: riscv-virtio,qemu (DT) [ 0.000000][ C0] epc : sparse_init+0x58a/0x6fe [ 0.000000][ C0] ra : sparse_init+0x58a/0x6fe [ 0.000000][ C0] epc : ffffffff86851c88 ra : ffffffff86851c88 sp : ffffffff88807a30 [ 0.000000][ C0] gp : ffffffff8a3bf240 tp : ffffffff88842080 t0 : ff600000ffab6000 [ 0.000000][ C0] t1 : 000000017fab6000 t2 : 65203a6573726363 s0 : ffffffff88807bc0 [ 0.000000][ C0] s1 : 000000000e000000 a0 : 0000000000000007 a1 : 0000000000000000 [ 0.000000][ C0] a2 : 0000000000000002 a3 : ffffffff86851c88 a4 : 0000000000000000 [ 0.000000][ C0] a5 : ffffffff88843080 a6 : 0000000000000003 a7 : 0000000000000000 [ 0.000000][ C0] s2 : ff60000000000000 s3 : 0040000000000000 s4 : 0004000000000000 [ 0.000000][ C0] s5 : ffffffff8a4d92e0 s6 : ff600000ffab55e0 s7 : ffffffff88384d00 [ 0.000000][ C0] s8 : 0000000000000003 s9 : ffffffff88384cc1 s10: ffffffff88384cc0 [ 0.000000][ C0] s11: ffffffff8a4daae0 t3 : ffffffff915e8b20 t4 : ffffffff915e8b20 [ 0.000000][ C0] t5 : ffffffff915e8b20 t6 : ffffffff915e8bc8 ssp : 0000000000000000 [ 0.000000][ C0] status: 0000000200000100 badaddr: ffffffff86851c88 cause: 0000000000000003 [ 0.000000][ C0] [] sparse_init+0x58a/0x6fe [ 0.000000][ C0] [] mm_core_init_early+0x116/0x1e30 [ 0.000000][ C0] [] start_kernel+0xd2/0x848 Convert MAX_FOLIO_VMEMMAP_ALIGN to the equivalent physical alignment before using it in VMEMMAP_ADDR_ALIGN. This keeps the existing round_down() logic while making the resulting vmemmap base satisfy the mask-alignment requirement. Link: https://lore.kernel.org/20260716115326.3466926-1-xujiakai2025@iscas.ac.cn Fixes: 476849b0fba4 ("riscv/mm: align vmemmap to maximal folio size") Signed-off-by: Jiakai Xu Reviewed-by: Kiryl Shutsemau (Meta) Cc: Albert Ou Cc: Alexandre Ghiti Cc: David Hildenbrand Cc: Guo Ren Cc: Mike Rapoport Cc: Muchun Song Cc: Nam Cao Cc: Palmer Dabbelt Cc: Vishal Moola (Oracle) Assisted-by: YuanSheng:DeepSeek-V4-Flash Cc: Signed-off-by: Andrew Morton --- arch/riscv/mm/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index 3e450890be07..422efa11824b 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -63,7 +63,8 @@ EXPORT_SYMBOL(phys_ram_base); #ifdef CONFIG_SPARSEMEM_VMEMMAP #define VMEMMAP_ADDR_ALIGN max(1ULL << SECTION_SIZE_BITS, \ - MAX_FOLIO_VMEMMAP_ALIGN) + PFN_PHYS(MAX_FOLIO_VMEMMAP_ALIGN / \ + sizeof(struct page))) unsigned long vmemmap_start_pfn __ro_after_init; EXPORT_SYMBOL(vmemmap_start_pfn); -- cgit v1.2.3 From e923bd21058ea02fd0dcd3549d151d143fd036e5 Mon Sep 17 00:00:00 2001 From: "Kiryl Shutsemau (Meta)" Date: Thu, 16 Jul 2026 10:54:24 +0100 Subject: mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios __folio_split() keeps dereferencing the mapping after the split: shmem_uncharge(mapping->host) and remap_page() while the folios are still frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the after-split folios have been unlocked and freed. Nothing holds an inode reference across that. The split relies on @folio -- which the beyond-EOF drop loop never removes, as it starts at folio_next(folio) -- staying locked and in the page cache to hold off eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read() runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure() passes when splitting a poisoned tail of a shmem THP that reaches past i_size during truncation, it too is gone from the page cache; so once @folio is unlocked no locked, in-cache folio pins the inode, and a concurrent final iput() can evict and RCU-free it before i_mmap_unlock_read() touches i_mmap_rwsem: BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790 i_mmap_unlock_read include/linux/fs.h:537 [inline] __folio_split+0x732/0x1640 mm/huge_memory.c:4100 try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675 memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470 Freed by task 4601: shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177 evict+0x57f/0xac0 fs/inode.c:870 Do every mapping dereference while @folio still pins the inode: drop i_mmap_rwsem right after remap_page(), before the loop that unlocks and frees the after-split folios, and clear @mapping so the exit path does not unlock it again. shmem_uncharge() and remap_page() already run before that point, so after this nothing past the unlock loop touches the inode or the mapping. This is now a rule the split depends on, alongside keeping @folio frozen until the page cache is updated: no inode or mapping dereference once the after-split folios start being unlocked. Link: https://lore.kernel.org/20260716095424.471052-1-kirill@shutemov.name Fixes: baa355fd3314 ("thp: file pages support for split_huge_page()") Signed-off-by: Kiryl Shutsemau (Meta) Reported-by: Hao Zhang Closes: https://lore.kernel.org/linux-mm/20260710071344.GA106129@zh-pc Co-developed-by: Hao Zhang Signed-off-by: Hao Zhang Acked-by: David Hildenbrand (Arm) Reviewed-by: Zi Yan Reviewed-by: Baolin Wang Reviewed-by: Miaohe Lin Cc: Baolin Wang Cc: Barry Song Cc: Dev Jain Cc: Lance Yang Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Naoya Horiguchi Cc: Nico Pache Cc: Ryan Roberts Cc: Signed-off-by: Andrew Morton --- mm/huge_memory.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 032702a4637b..58cabe6af33d 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -4113,6 +4113,18 @@ fail: remap_page(folio, 1 << old_order, ttu_flags); + /* + * Drop the mapping while the inode is still pinned. @folio stays + * locked and present in the page cache until the loop below, so + * eviction cannot free the inode yet; @lock_at is not enough, it may + * be a tail beyond EOF that the split already dropped from the page + * cache. Nothing past this point may touch the inode or the mapping. + */ + if (mapping) { + i_mmap_unlock_read(mapping); + mapping = NULL; + } + /* * Unlock all after-split folios except the one containing * @lock_at page. If @folio is not split, it will be kept locked. -- cgit v1.2.3 From 598356522b3a7c337fbf643561ee9b2ba868840e Mon Sep 17 00:00:00 2001 From: Burak Emir Date: Sat, 18 Jul 2026 17:13:03 +0200 Subject: MAINTAINERS: update address for Burak Emir Update MAINTAINERS and .mailmap to point to my gmail.com address: burak.emir@gmail.com. Link: https://lore.kernel.org/20260718151303.2649-1-burak.emir@gmail.com Signed-off-by: Burak Emir Cc: Alice Ryhl Cc: Jakub Kacinski Cc: Martin Kepplinger Cc: Yury Norov (NVIDIA) Signed-off-by: Andrew Morton --- .mailmap | 1 + MAINTAINERS | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/.mailmap b/.mailmap index a8be42f87e02..de68ca3cbd23 100644 --- a/.mailmap +++ b/.mailmap @@ -176,6 +176,7 @@ Brian Cain Brian King Brian Silverman Bryan Tan +Burak Emir Cai Huoqing Casey Connolly Casey Connolly diff --git a/MAINTAINERS b/MAINTAINERS index 2f9472c1a090..39c9413355f3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4634,7 +4634,7 @@ F: rust/helpers/cpumask.c BITMAP API [RUST] M: Alice Ryhl -M: Burak Emir +M: Burak Emir R: Yury Norov S: Maintained F: lib/find_bit_benchmark_rust.rs -- cgit v1.2.3 From 1fcac73551425c6924cca5cc29f10a5caf80907b Mon Sep 17 00:00:00 2001 From: Peter Collingbourne Date: Sat, 18 Jul 2026 10:29:23 -0700 Subject: arm64, mailmap: update email address for Peter Collingbourne I am no longer at Google. Link: https://lore.kernel.org/20260718172923.8297-1-peter@pcc.me.uk Signed-off-by: Peter Collingbourne Cc: Catalin Marinas Cc: Ian Rogers Cc: Jakub Kacinski Cc: Martin Kepplinger Cc: Nick Desaulniers Cc: Will Deacon Signed-off-by: Andrew Morton --- .mailmap | 1 + arch/arm64/kernel/pi/relocate.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/.mailmap b/.mailmap index de68ca3cbd23..c9c3a6b2b1f5 100644 --- a/.mailmap +++ b/.mailmap @@ -696,6 +696,7 @@ Paulo Alcantara Paulo Alcantara Pavankumar Kondeti Peter A Jonsson +Peter Collingbourne Peter Hilber Peter Oruba Peter Oruba diff --git a/arch/arm64/kernel/pi/relocate.c b/arch/arm64/kernel/pi/relocate.c index 2407d2696398..82592f3a5c1c 100644 --- a/arch/arm64/kernel/pi/relocate.c +++ b/arch/arm64/kernel/pi/relocate.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only // Copyright 2023 Google LLC // Authors: Ard Biesheuvel -// Peter Collingbourne +// Peter Collingbourne #include #include -- cgit v1.2.3 From 8c7372c5b155fff151a111f03ec0fb87c4c063fe Mon Sep 17 00:00:00 2001 From: "Nico Pache (Red Hat)" Date: Tue, 21 Jul 2026 04:18:11 -0600 Subject: MAINTAINERS: update Nico Pache's email address Switch my entry in MAINTAINERS and .mailmap to my @linux.dev email address Link: https://lore.kernel.org/20260721101811.115954-1-nico.pache@linux.dev Signed-off-by: Nico Pache Signed-off-by: Nico Pache (Red Hat) Acked-by: David Hildenbrand (Arm) Signed-off-by: Andrew Morton --- .mailmap | 1 + MAINTAINERS | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/.mailmap b/.mailmap index c9c3a6b2b1f5..ca6dc2575802 100644 --- a/.mailmap +++ b/.mailmap @@ -649,6 +649,7 @@ Nicholas Piggin Nicholas Piggin Nicholas Piggin Nicolas Ferre +Nico Pache Nicolas Pitre Nicolas Pitre Nicolas Saenz Julienne diff --git a/MAINTAINERS b/MAINTAINERS index 39c9413355f3..48b2baa1541f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17253,7 +17253,7 @@ M: Lorenzo Stoakes R: Zi Yan R: Baolin Wang R: Liam R. Howlett -R: Nico Pache +R: Nico Pache R: Ryan Roberts R: Dev Jain R: Barry Song -- cgit v1.2.3 From dc37771a43d4a8762f05060c28463b0c20e6dc9b Mon Sep 17 00:00:00 2001 From: Richard Chang Date: Mon, 20 Jul 2026 04:41:03 +0000 Subject: mm: vmscan: abort proactive reclaim early when freezing for suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Proactive reclaim (triggered via memory.reclaim or node sysfs) checks for pending signals in its outer loop in user_proactive_reclaim(). However, the inner reclaim loops—specifically scanning cgroups in shrink_many() and evicting/aging folios in try_to_shrink_lruvec()—can run for a long time before returning to the outer loop, especially on systems with many cgroups or large memory sizes. During system suspend, the PM freezer attempts to freeze all tasks by sending fake signals (setting TIF_SIGPENDING). Because the inner loops do not check for pending signals, the proactive reclaim task can remain stuck in kernel space for seconds, failing to enter the refrigerator in a timely manner. This leads to suspend failures due to freeze timeouts, a behavior observed on Android devices. This latency issue is specific to proactive reclaim because of its large, user-defined reclaim targets (could be gigabytes). Since commit 287d5fedb377 ("mm: memcg: use larger batches for proactive reclaim"), proactive reclaim uses larger decaying batch sizes (starting at 1/4 of the remaining target) to maintain throughput. This keeps the task in the inner reclaim loop for extended periods. In contrast, reactive reclaim (global/memcg) uses small targets (SWAP_CLUSTER_MAX, typically 32 pages), allowing it to return to the outer loop and check signals frequently. To fix this, add a signal_pending() check to should_abort_scan() for proactive reclaim paths. Since should_abort_scan() is called within the inner scanning and eviction loops, this allows proactive reclaim to abort early and return to the outer loop in user_proactive_reclaim(). Additionally, return -ERESTARTSYS instead of -EINTR in user_proactive_reclaim(). When interrupted by system suspend, returning -ERESTARTSYS allows the task to enter the refrigerator and automatically restart the syscall upon resume, making the freezer transparent to userspace. For real signals, the signal layer will either restart the syscall (if SA_RESTART is set) or return -EINTR to userspace. This fix specifically targets Multi-Gen LRU (MGLRU). Classic LRU's scan targets per iteration are strictly bounded by get_scan_count(), which ensures it returns to the outer loop more frequently. The check in should_abort_scan() is limited to proactive reclaim (sc->proactive) to avoid inadvertently affecting reactive reclaim paths, and is wrapped in unlikely() as it is a slow path. Link: https://lore.kernel.org/20260720044103.905191-1-richardycc@google.com Fixes: 287d5fedb377 ("mm: memcg: use larger batches for proactive reclaim") Fixes: 94968384dde1 ("memcg: introduce per-memcg reclaim interface") Suggested-by: Michal Hocko Suggested-by: Oleg Nesterov Signed-off-by: Richard Chang Acked-by: Michal Hocko Cc: Axel Rasmussen Cc: Barry Song Cc: David Hildenbrand Cc: Johannes Weiner Cc: Kairui Song Cc: Lorenzo Stoakes Cc: Martin Liu Cc: Minchan Kim Cc: Shakeel Butt Cc: Suren Baghdasaryan Cc: T.J. Mercier Cc: Wei Xu Cc: Yuanchu Xie Signed-off-by: Andrew Morton --- mm/vmscan.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 1a142c58700d..56708d1d2dfd 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -4926,6 +4926,9 @@ static bool should_abort_scan(struct lruvec *lruvec, struct scan_control *sc) int i; enum zone_watermarks mark; + if (unlikely(sc->proactive && signal_pending(current))) + return true; + if (sc->nr_reclaimed >= max(sc->nr_to_reclaim, compact_gap(sc->order))) return true; @@ -7906,8 +7909,15 @@ int user_proactive_reclaim(char *buf, unsigned long batch_size = (nr_to_reclaim - nr_reclaimed) / 4; unsigned long reclaimed; + /* + * Return -ERESTARTSYS to allow the freezer to interrupt the + * task. The syscall will be transparently restarted upon + * resume. For real signals, it either restarts the syscall + * (if SA_RESTART is set) or is converted to -EINTR by the + * signal layer. + */ if (signal_pending(current)) - return -EINTR; + return -ERESTARTSYS; /* * This is the final attempt, drain percpu lru caches in the -- cgit v1.2.3 From 0b45f6927a14914ff685fe0e6f9d11232a1e03df Mon Sep 17 00:00:00 2001 From: Link Lin Date: Tue, 21 Jul 2026 00:55:33 +0000 Subject: mm/page_reporting: use system_freezable_wq to fix UAF during suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like virtio_balloon reset their underlying virtio devices and delete their virtqueues via vdev->config->del_vqs(). However, page reporting work (page_reporting_process) was scheduled on the global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM freezer skips it, leaving page_reporting_process active during suspend. If pages are freed into the buddy allocator while suspending (for example, when core MM invokes the balloon shrinker during S4 hibernation image saving), page reporting triggers virtballoon_free_page_report() on deleted virtqueues, resulting in a Use-After-Free / General Protection Fault: [ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI [ 196.825967] Workqueue: events page_reporting_process [ 196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring] [ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon] [ 196.946943] page_reporting_process+0x370/0x4f0 Fix this by switching page reporting work to system_freezable_wq. This ensures that the PM freezer pauses page_reporting_process before device drivers destroy their reporting virtqueues. Because the reporting worker is frozen, memory reclamation/freeing (e.g. via shrinker execution) can safely return pages to MM during freeze without triggering unfrozen reporting work on deleted virtqueues. This aligns with the driver's existing design. The comment in virtballoon_freeze() states: /* * The workqueue is already frozen by the PM core before this * function is called. */ Testing: I have verified these fixes using Google’s virtualization infrastructure by running continuous suspend/resume iterations (40+ cycles) while churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60% --timeout 1`) to constantly create free pages for the buddy allocator. We also set the `page_reporting_order` parameter to 0 to make the page reporting worker highly sensitive, forcing it to pick up any 4K free pages. This confirmed that the UAF crashes are no longer reproducible. Link: https://lore.kernel.org/20260721005603.1710551-1-linkl@google.com Fixes: 36e66c554b5c ("mm: introduce Reported pages") Signed-off-by: Link Lin Suggested-by: David Hildenbrand (Arm) Suggested-by: Michael S. Tsirkin Acked-by: David Rientjes Acked-by: David Hildenbrand (Arm) Acked-by: Michael S. Tsirkin Cc: Alexander Duyck Cc: Greg Thelen Cc: James Houghton Cc: Jason Wang Cc: Jiaqi Yan Cc: Vlastimil Babka Cc: Xuan Zhuo Cc: Signed-off-by: Andrew Morton --- mm/page_reporting.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/page_reporting.c b/mm/page_reporting.c index 942e84b6908a..3e30731b940e 100644 --- a/mm/page_reporting.c +++ b/mm/page_reporting.c @@ -80,7 +80,8 @@ __page_reporting_request(struct page_reporting_dev_info *prdev) * now we are limiting this to running no more than once every * couple of seconds. */ - schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY); + queue_delayed_work(system_freezable_wq, &prdev->work, + PAGE_REPORTING_DELAY); } /* notify prdev of free page reporting request */ @@ -340,7 +341,8 @@ err_out: */ state = atomic_cmpxchg(&prdev->state, state, PAGE_REPORTING_IDLE); if (state == PAGE_REPORTING_REQUESTED) - schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY); + queue_delayed_work(system_freezable_wq, &prdev->work, + PAGE_REPORTING_DELAY); } static DEFINE_MUTEX(page_reporting_mutex); -- cgit v1.2.3 From 8f6f9fd93cd7a5dd607ad5cd910476dd68fff3ed Mon Sep 17 00:00:00 2001 From: Chris Gellermann Date: Wed, 22 Jul 2026 15:02:45 +0200 Subject: selftests/clone3: fix wild pointer access of getline due to missing init Patch series "selftests: Add missing initalization of pointer passed to getline", v2. This patch (of 2): Clone3_set_tid uses getline(&line, ...) in a loop to read the child's process status. The code expects that getline allocates the buffer for the line on the first loop iteration. According to the Open Group Spec[1], char *line has to be null pointer for this: > ssize_t getline(char **restrict lineptr, ...); > If *lineptr is a null pointer or if the object pointed to by *lineptr > is of insufficient size, an object shall be allocated as if by malloc() > or the object shall be reallocated as if by realloc()[...]. However, char *line is only declared, leading to an undefined value that is potentially non-null. In an example run with Musl v1.2.6, the realloc call[2] of getdelim, which implements getline, triggers a segfault: ./run_kselftest.sh --test clone3:clone3_set_tid [ 1366.165898] kselftest: Running tests in clone3 ... [ 1367.799244] clone3_set_tid[811]: unhandled signal 11 code 0x1 at 0x0000000000000000 in libc.so[68184,3fbf69f000+4c000] [ 1367.802808] CPU: 0 UID: 0 PID: 811 Comm: clone3_set_tid Not tainted .. [ 1367.804188] epc: 0x0000003fbf6b0184 [ 1367.804188] ra : 0x0000003fbf6d4664 [ 1367.804188] sp : 0x0000003fce5f2e40 [ 1367.805314] gp : 0x0000002aaab0dfb8 [ 1367.805314] tp : 0x0000003fbf6f14a8 [ 1367.805314] t0 : 0x0000003fbf63d000 ... Looking at the realloc implementation, Musl mallocs for a null pointer memory. But for a non-null pointer, it assumes it's passed a valid pointer to the heap and tries to access its meta-data. This leads to the segfault we see: void *realloc(void *p, size_t n) { if (!p) return malloc(n); if (size_overflows(n)) return 0; struct meta *g = get_meta(p); ... } Fix this by properly initializing the line pointer to NULL. Link: https://lore.kernel.org/20260722130246.2135563-1-christian.gellermann@codasip.com Link: https://lore.kernel.org/20260722130246.2135563-2-christian.gellermann@codasip.com Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1] Link: https://git.musl-libc.org/cgit/musl/tree/src/stdio/getdelim.c#n38 [2] Fixes: 41585bbeeef9 ("selftests: add tests for clone3() with *set_tid") Signed-off-by: Chris Gellermann Acked-by: David Hildenbrand (arm) Reviewed-by: Lorenzo Stoakes Cc: Christian Brauner Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Michal Hocko Cc: Mike Rapoport Cc: Shuah Khan Cc: Suren Baghdasaryan Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton --- tools/testing/selftests/clone3/clone3_set_tid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/clone3/clone3_set_tid.c b/tools/testing/selftests/clone3/clone3_set_tid.c index 5c944aee6b41..485efa7c9eed 100644 --- a/tools/testing/selftests/clone3/clone3_set_tid.c +++ b/tools/testing/selftests/clone3/clone3_set_tid.c @@ -141,7 +141,7 @@ int main(int argc, char *argv[]) { FILE *f; char buf; - char *line; + char *line = NULL; int status; int ret = -1; size_t len = 0; -- cgit v1.2.3 From 9f1d75a4ce04095afdb63d8e540092ff8151dacf Mon Sep 17 00:00:00 2001 From: Chris Gellermann Date: Wed, 22 Jul 2026 15:02:46 +0200 Subject: selftests/mm: fix potential wild pointer access of getline due to missing init This is another occurrence of using getline where the code assumes that getline allocates memory to store the line, but the pointer passed to it is uninitialized and potentially a non-null pointer. This violates the Open Group Spec[1] and caused a segfault in a similar situation in selftest/clone3/clone3_set_tid. Fix it by initializing the line pointer to NULL. The issue has been found by simply grepping through the selftest code after running into the issue in clone3_set_tid. Whether it segfaults in its current state is unknown to me. But it's good to be addressed due to defensive reasons. Link: https://lore.kernel.org/20260722130246.2135563-3-christian.gellermann@codasip.com Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1] Fixes: 26b4224d9961 ("selftests: expanding more mlock selftest") Signed-off-by: Chris Gellermann Acked-by: David Hildenbrand (arm) Reviewed-by: Lorenzo Stoakes Cc: Christian Brauner Cc: Liam R. Howlett Cc: Michal Hocko Cc: Mike Rapoport Cc: Shuah Khan Cc: Suren Baghdasaryan Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/mlock-random-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/mlock-random-test.c b/tools/testing/selftests/mm/mlock-random-test.c index 9d349c151360..16294bc7dae6 100644 --- a/tools/testing/selftests/mm/mlock-random-test.c +++ b/tools/testing/selftests/mm/mlock-random-test.c @@ -84,7 +84,7 @@ int get_proc_locked_vm_size(void) int get_proc_page_size(unsigned long addr) { FILE *smaps; - char *line; + char *line = NULL; unsigned long mmupage_size = 0; size_t size; -- cgit v1.2.3 From 0fe1e3e8f3380d7862296a73b528d164e96c76b8 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Sun, 26 Jul 2026 17:08:05 +0200 Subject: net: phylink: put link_gpio if phylink_create fails In phylink_create() if phylink_register_sfp() returns an error, link_gpio obtained by phylink_parse_fixedlink() is never released. While this is a very unlikely scenario, it's worth to fix/handle this. This was present from the very first implementation of phylink but got relevant only with the introduction of ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") where additional function were added after phylink_parse_fixedlink() making the release of link_gpio needed if such additional function errored out. While at it, restructure the exit condition of phylink_create() with the goto pattern to reduce code duplication on handling error conditions. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260726150806.2437-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/phylink.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 087ac63f9193..18d2ead97aa5 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1875,8 +1875,8 @@ struct phylink *phylink_create(struct phylink_config *config, } else if (config->type == PHYLINK_DEV) { pl->dev = config->dev; } else { - kfree(pl); - return ERR_PTR(-EINVAL); + ret = -EINVAL; + goto free_pl; } pl->mac_supports_eee_ops = phylink_mac_implements_lpi(mac_ops); @@ -1909,28 +1909,29 @@ struct phylink *phylink_create(struct phylink_config *config, phylink_validate(pl, pl->supported, &pl->link_config); ret = phylink_parse_mode(pl, fwnode); - if (ret < 0) { - kfree(pl); - return ERR_PTR(ret); - } + if (ret < 0) + goto free_pl; if (pl->cfg_link_an_mode == MLO_AN_FIXED) { ret = phylink_parse_fixedlink(pl, fwnode); - if (ret < 0) { - kfree(pl); - return ERR_PTR(ret); - } + if (ret < 0) + goto release_link_gpio; } pl->req_link_an_mode = pl->cfg_link_an_mode; ret = phylink_register_sfp(pl, fwnode); - if (ret < 0) { - kfree(pl); - return ERR_PTR(ret); - } + if (ret < 0) + goto release_link_gpio; return pl; + +release_link_gpio: + if (pl->link_gpio) + gpiod_put(pl->link_gpio); +free_pl: + kfree(pl); + return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(phylink_create); -- cgit v1.2.3 From 2e1d2e65e773d67dab163127f11a47dab0fbca9f Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 9 Jul 2026 10:01:33 +0900 Subject: ata: libata-scsi: terminate deferred commands on time out If a command times out while we have deferred non-NCQ commands waiting to be issued, the SCSI EH task is not immediately woken up as the waiting deferred commands are never issued nor completed, thus leaving the SCSI host in a busy state (shost->host_failed != scsi_host_busy(shost)) which prevents the SCSI EH task from being woken up. Eventually, when the deferred commands also time out, the SCSI EH task is woken up and the timeout processing occurs. Avoid this unnecessary SCSI EH task wake-up additional time by scheduling a retry of all waiting deferred QCs, using the eh_timed_out SCSI host template operation. The function ata_scsi_eh_timed_out() is introduced to implement this operation. However, terminating deferred commands with DID_REQUEUE to force a retry by calling the function ata_scsi_requeue_deferred_qc() may still keep the SCSI host in a busy state because the block layer may immediately re-issue these commands. The solution to this is to schedule libata EH for the port which suffered the command timeout to prevent accepting any new command. ata_scsi_requeue_deferred_qc() is modified to add a call to ata_port_schedule_eh() for this purpose. In addition to this change, ata_scsi_requeue_deferred_qc() is also modified to take a new timedout_scmd scsi command argument which indicates the SCSI command that timed out. With this additional argument, ata_scsi_requeue_deferred_qc() can now also terminate with DID_TIME_OUT any timed out deferred qc, which simplifies ata_scsi_cmd_error_handler(). In this case, ata_scsi_requeue_deferred_qc() returns SCSI_EH_DONE, with this return value propagated back to the ata_scsi_eh_timed_out() operation to indicate to scsi_timeout() that the timed out command was handled and no further processing is needed. For non-timed out deferred qc that need to be retried, ata_scsi_requeue_deferred_qc() returns SCSI_EH_NOT_HANDLED, thus indicating to scsi_timeout() that the timed out command needs to go through the SCSI EH (and libata EH) processing by adding it to the EH work queue with scsi_eh_scmd_add(). One side effect of these changes is that the function atapi_qc_complete() needs to be modified to ensure that a deferred ATAPI command that needs to be retried is completed with DID_REQUEUE instead of the default SAM_STAT_GOOD status, and a command that timed out is completed with DID_TIME_OUT instead of SAM_STAT_CHECK_CONDITION. Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Igor Pylypiv Tested-by: Igor Pylypiv Reviewed-by: Niklas Cassel Reviewed-by: Martin K. Petersen --- drivers/ata/libata-eh.c | 29 +++--------- drivers/ata/libata-scsi.c | 112 +++++++++++++++++++++++++++++++++++++++++----- drivers/ata/libata.h | 3 +- include/linux/libata.h | 2 + 4 files changed, 111 insertions(+), 35 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 46947ed0c657..c154103d892c 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -658,29 +658,12 @@ int ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, set_host_byte(scmd, DID_OK); ata_qc_for_each_raw(ap, qc, i) { - if (qc->scsicmd != scmd) - continue; - if ((qc->flags & ATA_QCFLAG_ACTIVE) || - qc == qc->dev->link->deferred_qc) + if (qc->scsicmd == scmd && + qc->flags & ATA_QCFLAG_ACTIVE) break; } - if (i < ATA_MAX_QUEUE && qc == qc->dev->link->deferred_qc) { - /* - * This is a deferred command that timed out while - * waiting for the command queue to drain. Since the qc - * is not active yet (deferred_qc is still set, so the - * deferred qc work has not issued the command yet), - * simply signal the timeout by finishing the SCSI - * command and clear the deferred qc to prevent the - * deferred qc work from issuing this qc. - */ - WARN_ON_ONCE(qc->flags & ATA_QCFLAG_ACTIVE); - qc->dev->link->deferred_qc = NULL; - cancel_work(&qc->dev->link->deferred_qc_work); - set_host_byte(scmd, DID_TIME_OUT); - scsi_eh_finish_cmd(scmd, &ap->eh_done_q); - } else if (i < ATA_MAX_QUEUE) { + if (i < ATA_MAX_QUEUE) { /* the scmd has an associated qc */ if (!(qc->flags & ATA_QCFLAG_EH)) { /* which hasn't failed yet, timeout */ @@ -956,10 +939,10 @@ static void ata_eh_set_pending(struct ata_port *ap, bool fastdrain) ap->pflags |= ATA_PFLAG_EH_PENDING; /* - * If we have a deferred qc, requeue it so that it is retried once EH - * completes. + * If we have deferred QCs, requeue them so that the SCSI EH task can + * run. */ - ata_scsi_requeue_deferred_qc(ap); + ata_scsi_requeue_deferred_qc(ap, NULL); if (!fastdrain) return; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 5868526301a2..02b04de925f9 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1685,26 +1685,80 @@ void ata_scsi_deferred_qc_work(struct work_struct *work) spin_unlock_irqrestore(ap->lock, flags); } -void ata_scsi_requeue_deferred_qc(struct ata_port *ap) +enum scsi_timeout_action ata_scsi_requeue_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *timedout_scmd) { + enum scsi_timeout_action action = SCSI_EH_NOT_HANDLED; + struct ata_queued_cmd *qc; struct ata_link *link; + u32 host_byte; lockdep_assert_held(ap->lock); /* - * If we have a deferred qc when a reset occurs or NCQ commands fail, - * do not try to be smart about what to do with this deferred command - * and simply requeue it by completing it with DID_REQUEUE. + * If we have deferred QCs when a reset, a timeout or an NCQ command + * fails, do not try to be smart about what to do with the deferred + * commands and simply terminate them and let the SCSI layer decide + * what to do. */ ata_for_each_link(link, ap, PMP_FIRST) { - struct ata_queued_cmd *qc = link->deferred_qc; + qc = link->deferred_qc; + if (!qc) + continue; + + /* + * Clear the deferred QC so that the deferred work does not try + * to issue it. + */ + link->deferred_qc = NULL; + cancel_work(&link->deferred_qc_work); + + /* + * We are going to complete some scsi command, either with + * DID_TIME_OUT if the command timed out while waiting for being + * issued, or with DID_REQUEUE if another command timed out or + * we had a failed command. However, the block layer may re-issue + * these commands immediately, keeping the scsi host busy and + * thus preventing the SCSI EH task from running. + * So schedule EH on the port to prevent accepting new commands + * until everything is sorted out with the error or timeout that + * got us here in the first place. Note that we set EH pending + * on the port before calling ata_port_schedule_eh() so that we + * do not reenter this function from ata_eh_set_pending() with + * timedout_scmd being NULL and erroneously retry deferred QCs + * that have timed out on other links. + */ + if (!ata_port_eh_scheduled(ap)) { + ap->pflags |= ATA_PFLAG_EH_PENDING; + ata_port_schedule_eh(ap); + } - if (qc) { - link->deferred_qc = NULL; - cancel_work(&link->deferred_qc_work); - ata_scsi_qc_done(qc, true, DID_REQUEUE << 16); + /* + * If we are being called from scsi_timeout(), then we have a + * non-NULL timedout_scmd. If the timed out command is for a + * deferred QC, terminate that deferred QC with DID_TIME_OUT and + * requeue all other deferred QCs. In this case we need to + * return SCSI_EH_DONE, because the timed out command was + * handled. + * If the timed out command is not for a deferred QC, we need to + * requeue all deferred QCs, and return SCSI_EH_NOT_HANDLED so + * that the timed out command gets added to the EH work queue + * with scsi_eh_scmd_add(), for later handling with libata EH + * ata_scsi_cmd_error_handler(). + * If timedout_scmd is NULL, we simply need to requeue all + * deferred QCs and the return value does not matter as we were + * not called from scsi_timeout(). + */ + if (timedout_scmd && qc->scsicmd == timedout_scmd) { + host_byte = DID_TIME_OUT; + action = SCSI_EH_DONE; + } else { + host_byte = DID_REQUEUE; } + ata_scsi_qc_done(qc, true, host_byte << 16); } + + return action; } static void ata_scsi_schedule_deferred_qc(struct ata_link *link) @@ -1723,13 +1777,41 @@ static void ata_scsi_schedule_deferred_qc(struct ata_link *link) return; if (ata_port_eh_scheduled(ap)) { - ata_scsi_requeue_deferred_qc(ap); + ata_scsi_requeue_deferred_qc(ap, NULL); return; } if (!ap->ops->qc_defer(qc)) queue_work(system_highpri_wq, &link->deferred_qc_work); } +static enum scsi_timeout_action +ata_scsi_retry_deferred_qc(struct ata_port *ap, struct scsi_cmnd *scmd) +{ + enum scsi_timeout_action action; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + action = ata_scsi_requeue_deferred_qc(ap, scmd); + spin_unlock_irqrestore(ap->lock, flags); + + return action; +} + +enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *scmd) +{ + struct ata_port *ap = ata_shost_to_port(scmd->device->host); + + /* + * ata_scsi_cmd_error_handler() takes care of commands that timed out + * while executing. However, if we have deferred QCs while a timeout + * triggers, we must requeue these commands for retry so that we do not + * unnecessarily delay starting the SCSI EH task until these deferred + * commands also time out. + */ + return ata_scsi_retry_deferred_qc(ap, scmd); +} +EXPORT_SYMBOL_GPL(ata_scsi_eh_timed_out); + static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) { struct ata_link *link = qc->dev->link; @@ -2936,7 +3018,15 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev) qc->dev->sdev->locked = 0; - ata_scsi_qc_done(qc, true, SAM_STAT_CHECK_CONDITION); + if (cmd->result) + ata_scsi_qc_done(qc, false, 0); + else + ata_scsi_qc_done(qc, true, SAM_STAT_CHECK_CONDITION); + return; + } + + if (cmd->result) { + ata_scsi_qc_done(qc, false, 0); return; } diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 700627596ce1..8dacc1daabf0 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -180,7 +180,8 @@ enum scsi_qc_status __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_port *ap) __must_hold(ap->lock); void ata_scsi_deferred_qc_work(struct work_struct *work); -void ata_scsi_requeue_deferred_qc(struct ata_port *ap); +enum scsi_timeout_action ata_scsi_requeue_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *scmd); /* libata-eh.c */ extern unsigned int ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); diff --git a/include/linux/libata.h b/include/linux/libata.h index 6c0d385b2cde..f10b3287b507 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1153,6 +1153,7 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, #endif extern enum scsi_qc_status ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); +enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *cmd); #if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); #else @@ -1464,6 +1465,7 @@ extern const struct attribute_group *ata_common_sdev_groups[]; .ioctl = ata_scsi_ioctl, \ ATA_SCSI_COMPAT_IOCTL \ .queuecommand = ata_scsi_queuecmd, \ + .eh_timed_out = ata_scsi_eh_timed_out, \ .dma_need_drain = ata_scsi_dma_need_drain, \ .this_id = ATA_SHT_THIS_ID, \ .emulated = ATA_SHT_EMULATED, \ -- cgit v1.2.3 From e7468b3f9b404ac7c1329ef07c146c3356dfbd01 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 23 Jul 2026 07:42:26 +0900 Subject: ata: libata-scsi: schedule deferred atapi command Modify atapi_qc_complete() to call ata_scsi_schedule_deferred_qc() to ensure that any deferred queued command can execute. This is similar to ata_scsi_qc_complete() function for regular ATA devices. Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal --- drivers/ata/libata-scsi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 02b04de925f9..cd64787c4772 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2993,6 +2993,7 @@ static void atapi_fixup_inquiry(struct scsi_cmnd *cmd) static void atapi_qc_complete(struct ata_queued_cmd *qc) { + struct ata_link *link = qc->dev->link; struct scsi_cmnd *cmd = qc->scsicmd; unsigned int err_mask = qc->err_mask; @@ -3022,12 +3023,12 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) ata_scsi_qc_done(qc, false, 0); else ata_scsi_qc_done(qc, true, SAM_STAT_CHECK_CONDITION); - return; + goto schedule_deferred; } if (cmd->result) { ata_scsi_qc_done(qc, false, 0); - return; + goto schedule_deferred; } /* successful completion path */ @@ -3035,6 +3036,9 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) atapi_fixup_inquiry(cmd); ata_scsi_qc_done(qc, true, SAM_STAT_GOOD); + +schedule_deferred: + ata_scsi_schedule_deferred_qc(link); } /** * atapi_xlat - Initialize PACKET taskfile -- cgit v1.2.3 From de202d2251bc181c6019b1ad3c0ba8133e5ec68d Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 9 Jul 2026 16:02:23 +0900 Subject: scsi: libsas: terminate deferred commands on time out If a command times out while we have deferred non-NCQ commands waiting to be issued, the SCSI EH task is not immediately woken up as the waiting deferred commands are never issued nor completed, thus leaving the SCSI host in a busy state (shost->host_failed != scsi_host_busy(shost)) which prevents the SCSI EH task from being woken up. Eventually, when the deferred commands also time out, the SCSI EH task is woken up and the timeout processing occurs. Avoid this unnecessary additional SCSI EH wake up time with the same method as implemented in libata-scsi, using the eh_timed_out SCSI host template operation. The function sas_eh_timed_out() implements this operation and executes the function ata_scsi_retry_deferred_qc() for SATA devices. Co-developed-by: Igor Pylypiv Signed-off-by: Igor Pylypiv Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: John Garry Reviewed-by: Hannes Reinecke Tested-by: Igor Pylypiv Reviewed-by: Niklas Cassel Reviewed-by: Martin K. Petersen --- drivers/ata/libata-scsi.c | 5 +++-- drivers/scsi/libsas/sas_scsi_host.c | 15 +++++++++++++++ include/linux/libata.h | 2 ++ include/scsi/libsas.h | 2 ++ 4 files changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index cd64787c4772..d2160ee7ca7d 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1784,8 +1784,8 @@ static void ata_scsi_schedule_deferred_qc(struct ata_link *link) queue_work(system_highpri_wq, &link->deferred_qc_work); } -static enum scsi_timeout_action -ata_scsi_retry_deferred_qc(struct ata_port *ap, struct scsi_cmnd *scmd) +enum scsi_timeout_action ata_scsi_retry_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *scmd) { enum scsi_timeout_action action; unsigned long flags; @@ -1796,6 +1796,7 @@ ata_scsi_retry_deferred_qc(struct ata_port *ap, struct scsi_cmnd *scmd) return action; } +EXPORT_SYMBOL_GPL(ata_scsi_retry_deferred_qc); enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *scmd) { diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index c83282733ec4..97ac3db5dccb 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -502,6 +502,21 @@ int sas_eh_target_reset_handler(struct scsi_cmnd *cmd) } EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler); +/* + * Handle deferred QCs in case of a command timeout. + * See ata_scsi_eh_timed_out() for details. + */ +enum scsi_timeout_action sas_eh_timed_out(struct scsi_cmnd *cmd) +{ + struct domain_device *dev = cmd_to_domain_dev(cmd); + + if (dev_is_sata(dev)) + return ata_scsi_retry_deferred_qc(dev->sata_dev.ap, cmd); + + return SCSI_EH_NOT_HANDLED; +} +EXPORT_SYMBOL_GPL(sas_eh_timed_out); + /* Try to reset a device */ static int try_to_reset_cmd_device(struct scsi_cmnd *cmd) { diff --git a/include/linux/libata.h b/include/linux/libata.h index f10b3287b507..1827502b9cf2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1153,6 +1153,8 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, #endif extern enum scsi_qc_status ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); +enum scsi_timeout_action ata_scsi_retry_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *scmd); enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *cmd); #if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 163f23c92b41..c7017ae76c61 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -705,6 +705,7 @@ void sas_task_abort(struct sas_task *); int sas_eh_abort_handler(struct scsi_cmnd *cmd); int sas_eh_device_reset_handler(struct scsi_cmnd *cmd); int sas_eh_target_reset_handler(struct scsi_cmnd *cmd); +enum scsi_timeout_action sas_eh_timed_out(struct scsi_cmnd *cmd); extern void sas_target_destroy(struct scsi_target *); extern int sas_sdev_init(struct scsi_device *); @@ -743,6 +744,7 @@ void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event, .this_id = -1, \ .eh_device_reset_handler = sas_eh_device_reset_handler, \ .eh_target_reset_handler = sas_eh_target_reset_handler, \ + .eh_timed_out = sas_eh_timed_out, \ .target_destroy = sas_target_destroy, \ .ioctl = sas_ioctl, \ -- cgit v1.2.3 From 9c33222bd387312874fbe36ca8002e5c945b9653 Mon Sep 17 00:00:00 2001 From: TanZheng Date: Fri, 24 Jul 2026 15:58:50 +0800 Subject: scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE In the iblock_execute_pr_out() function, PRO_PREEMPT, PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability checks through ops->pr_clear. The error check allows unimplemented hooks to pass through the gate, resulting dereferencing a NULL function pointer. Check whether the hooks that need to be called are supported. Fixes: 394f81184882 ("scsi: target: Add block PR support to iblock") Signed-off-by: TanZheng Reviewed-by: Mike Christie Link: https://patch.msgid.link/20260724075850.280699-1-kensanya@163.com Signed-off-by: Martin K. Petersen --- drivers/target/target_core_iblock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 1087d1d17c36..ea65d39fef88 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -906,7 +906,7 @@ static sense_reason_t iblock_execute_pr_out(struct se_cmd *cmd, u8 sa, u64 key, break; case PRO_PREEMPT: case PRO_PREEMPT_AND_ABORT: - if (!ops->pr_clear) { + if (!ops->pr_preempt) { pr_err("block_device does not support pr_preempt.\n"); return TCM_UNSUPPORTED_SCSI_OPCODE; } @@ -916,8 +916,8 @@ static sense_reason_t iblock_execute_pr_out(struct se_cmd *cmd, u8 sa, u64 key, sa == PRO_PREEMPT_AND_ABORT); break; case PRO_RELEASE: - if (!ops->pr_clear) { - pr_err("block_device does not support pr_pclear.\n"); + if (!ops->pr_release) { + pr_err("block_device does not support pr_release.\n"); return TCM_UNSUPPORTED_SCSI_OPCODE; } -- cgit v1.2.3 From 93dde0bf2f39a0f9f57fd610aa3201ce5b753433 Mon Sep 17 00:00:00 2001 From: Ibrahim Hashimov Date: Sun, 12 Jul 2026 20:37:39 +0200 Subject: scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write resp_report_zones() sizes the reply buffer from the CDB allocation length. The v3 fix rounds alloc_len up with ALIGN() before deriving the descriptor count: rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD); arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to 0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which passes the !arr check, and desc = arr + 64 is then dereferenced in the loop -> out-of-bounds write / panic. Clamp rep_max_zones to devip->nr_zones. The loop already stops at sdebug_capacity (after nr_zones zones), so a report can never hold more than nr_zones descriptors; the clamp does not change the report, it only bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device property that can never reach 0x100000000. Fixes: 7db0e0c8190a ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command") Suggested-by: Damien Le Moal Cc: stable@vger.kernel.org Signed-off-by: Ibrahim Hashimov Assisted-by: AuditCode-AI:2026.07 Reviewed-by: Damien Le Moal Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260712183739.83915-1-security@auditcode.ai Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 9d1c9c41d0f9..643051332132 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -5890,6 +5890,7 @@ static int resp_report_zones(struct scsi_cmnd *scp, u32 alloc_len, rep_opts, rep_len; bool partial; u64 lba, zs_lba; + u64 arr_len; u8 *arr = NULL, *desc; u8 *cmd = scp->cmnd; struct sdeb_zone_state *zsp = NULL; @@ -5911,9 +5912,12 @@ static int resp_report_zones(struct scsi_cmnd *scp, return check_condition_result; } - rep_max_zones = (alloc_len - 64) >> ilog2(RZONES_DESC_HD); + rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) >> + ilog2(RZONES_DESC_HD); + rep_max_zones = min_t(unsigned int, rep_max_zones, devip->nr_zones); + arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); - arr = kzalloc(alloc_len, GFP_ATOMIC | __GFP_NOWARN); + arr = kzalloc(arr_len, GFP_ATOMIC | __GFP_NOWARN); if (!arr) { mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC, INSUFF_RES_ASCQ); -- cgit v1.2.3 From f71b4a30983b846b4075bf544e835121e70e6a43 Mon Sep 17 00:00:00 2001 From: Guangshuo Li Date: Wed, 15 Jul 2026 01:27:26 +0800 Subject: scsi: ufs: core: Cancel RTC work in active-active suspend UFS RTC support schedules ufs_rtc_update_work to periodically update the device RTC. The work can issue query commands and access the UFS host controller. A previous change moved the RTC work cancellation before the PRE_CHANGE vendor suspend callback to close a race in the common suspend path. However, the active-active path jumps directly to vops_suspend after flushing exception handling work and therefore bypasses the cancellation. If the RTC work runs while the vendor suspend callback is gating or otherwise changing hardware state, it can access the controller during suspend and trigger an SError. Cancel the RTC work before entering the vendor suspend callback in the active-active path. Since this path now cancels the work, move the RTC work scheduling outside the device and link state restoration block in the resume path. This restarts RTC updates after an active-active suspend and resume cycle. Fixes: b0bd84c39289 ("scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend") Signed-off-by: Guangshuo Li Reviewed-by: Peter Wang Reviewed-by: Bean Huo Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260714172726.1736967-1-lgs201920130244@gmail.com Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufshcd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index d3044a3089b5..c3b105b2678e 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -10269,6 +10269,7 @@ static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) req_link_state == UIC_LINK_ACTIVE_STATE) { ufshcd_disable_auto_bkops(hba); flush_work(&hba->eeh_work); + cancel_delayed_work_sync(&hba->ufs_rtc_update_work); goto vops_suspend; } @@ -10478,10 +10479,11 @@ static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) if (ret) goto set_old_link_state; ufshcd_set_timestamp_attr(hba); - schedule_delayed_work(&hba->ufs_rtc_update_work, - msecs_to_jiffies(UFS_RTC_UPDATE_INTERVAL_MS)); } + schedule_delayed_work(&hba->ufs_rtc_update_work, + msecs_to_jiffies(UFS_RTC_UPDATE_INTERVAL_MS)); + if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) ufshcd_enable_auto_bkops(hba); else -- cgit v1.2.3 From 8a309036f557d3ff4efb2beea5132ba91172d934 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 15 Jul 2026 10:12:28 -0700 Subject: scsi: ufs: core: Revert "Delegate the interrupt service routine to a threaded IRQ handler" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There have been multiple reports of performance regressions caused by commit 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler"). Hence this revert. This patch reverts most of the following commits: * 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") * 6475cfb81fc4 ("scsi: ufs: core: Avoid IRQ thread wakeup during active UIC command") This patch preserves the following commits: * 034d319c8899 ("scsi: ufs: core: Fix interrupt handling for MCQ Mode") * eabcac808ca3 ("scsi: ufs: core: Fix IRQ lock inversion for the SCSI host lock") Cc: Neil Armstrong Cc: 孙魁 (Kui Sun) Cc: André Draszik Cc: Gregory CLEMENT Cc: Sebastian Andrzej Siewior Fixes: 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") Signed-off-by: Bart Van Assche Reviewed-by: Sebastian Andrzej Siewior Tested-by: André Draszik # on Pixel 6 Reviewed-by: André Draszik Link: https://patch.msgid.link/b70eb60a01f971bed68c42c5b555929db5f835df.1784135511.git.bvanassche@acm.org Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufshcd.c | 39 +++------------------------------------ 1 file changed, 3 insertions(+), 36 deletions(-) diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index c3b105b2678e..34228beb3f59 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -7357,7 +7357,7 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) } /** - * ufshcd_threaded_intr - Threaded interrupt service routine + * ufshcd_intr - Main interrupt service routine * @irq: irq number * @__hba: pointer to adapter instance * @@ -7365,7 +7365,7 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) * IRQ_HANDLED - If interrupt is valid * IRQ_NONE - If invalid interrupt */ -static irqreturn_t ufshcd_threaded_intr(int irq, void *__hba) +static irqreturn_t ufshcd_intr(int irq, void *__hba) { u32 last_intr_status, intr_status, enabled_intr_status = 0; irqreturn_t retval = IRQ_NONE; @@ -7404,38 +7404,6 @@ static irqreturn_t ufshcd_threaded_intr(int irq, void *__hba) return retval; } -/** - * ufshcd_intr - Main interrupt service routine - * @irq: irq number - * @__hba: pointer to adapter instance - * - * Return: - * IRQ_HANDLED - If interrupt is valid - * IRQ_WAKE_THREAD - If handling is moved to threaded handled - * IRQ_NONE - If invalid interrupt - */ -static irqreturn_t ufshcd_intr(int irq, void *__hba) -{ - struct ufs_hba *hba = __hba; - u32 intr_status, enabled_intr_status; - - /* - * Handle interrupt in thread if MCQ or ESI is disabled, - * and no active UIC command. - */ - if ((!hba->mcq_enabled || !hba->mcq_esi_enabled) && - !hba->active_uic_cmd) - return IRQ_WAKE_THREAD; - - intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); - enabled_intr_status = intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); - - ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); - - /* Directly handle interrupts since MCQ ESI handlers does the hard job */ - return ufshcd_sl_intr(hba, enabled_intr_status); -} - static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag) { int err = 0; @@ -11238,8 +11206,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) ufshcd_readl(hba, REG_INTERRUPT_ENABLE); /* IRQ registration */ - err = devm_request_threaded_irq(dev, irq, ufshcd_intr, ufshcd_threaded_intr, - IRQF_ONESHOT | IRQF_SHARED, UFSHCD, hba); + err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); if (err) { dev_err(hba->dev, "request irq failed\n"); goto out_disable; -- cgit v1.2.3 From b601fa590e667bd9643feed8c869b6b3e418480d Mon Sep 17 00:00:00 2001 From: Benjamin Block Date: Mon, 20 Jul 2026 09:27:36 +0200 Subject: scsi: zfcp: Fix memory leak during adapter release by destroying gid_pn_req When releasing an adapter we don't free the mempool 'gid_pn_req' that is allocated during the enqueue. This leaks memory: unreferenced object 0xd8d29297de700 (size 256): comm "(udev-worker)", pid 2105, jiffies 4294945794 hex dump (first 32 bytes): 00 00 00 00 de ad 4e ad ff ff ff ff 00 00 00 00 ......N......... ff ff ff ff ff ff ff ff 00 0d c4 5f 67 9d 99 e0 ..........._g... backtrace (crc 4a5b5da2): [<000dc45f64da418c>] kmemleak_alloc+0x6c/0xa0 [<000dc45f62b430aa>] __kmalloc_cache_node_noprof+0x36a/0x4d0 [<000dc45f629a535a>] mempool_create_node_noprof+0xaa/0x150 [<000dc45ee2c065e6>] zfcp_allocate_low_mem_buffers+0x96/0x370 [zfcp] [<000dc45ee2c070f8>] zfcp_adapter_enqueue+0x598/0xd40 [zfcp] [<000dc45ee2c08eb0>] zfcp_ccw_set_online+0x160/0x210 [zfcp] [<000dc45f643d4762>] ccw_device_set_online+0x232/0xd80 [<000dc45f643d53d4>] online_store_recog_and_online+0x124/0x390 [<000dc45f643d8238>] online_store+0x298/0x5b0 [<000dc45f62eb0a04>] kernfs_fop_write_iter+0x2c4/0x480 [<000dc45f62c81150>] new_sync_write+0x370/0x4b0 [<000dc45f62c87abe>] vfs_write+0x43e/0x5b0 [<000dc45f62c87ff4>] ksys_write+0x114/0x1f0 [<000dc45f621c4a16>] do_syscall+0x2f6/0x430 [<000dc45f64d9d5d8>] __do_syscall+0xc8/0x1c0 [<000dc45f64dc2224>] system_call+0x74/0xa0 Fix this by destroying the mempool during the adapter's release. Fixes: 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") Signed-off-by: Benjamin Block Tested-by: M Nikhil Acked-by: M Nikhil Reviewed-by: Chinmaya Kajagar Reviewed-by: Nihar Panda Link: https://patch.msgid.link/20260720072736.3381816-2-niharp@linux.ibm.com Signed-off-by: Martin K. Petersen --- drivers/s390/scsi/zfcp_aux.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 8ff7db7921b5..fea573e00f9d 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -253,6 +253,7 @@ static int zfcp_allocate_low_mem_buffers(struct zfcp_adapter *adapter) static void zfcp_free_low_mem_buffers(struct zfcp_adapter *adapter) { mempool_destroy(adapter->pool.erp_req); + mempool_destroy(adapter->pool.gid_pn_req); mempool_destroy(adapter->pool.scsi_req); mempool_destroy(adapter->pool.scsi_abort); mempool_destroy(adapter->pool.qtcb_pool); -- cgit v1.2.3 From a8ddfd2425bbbafadae8700d63ed8a61a4109878 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Wed, 22 Jul 2026 09:30:10 +0300 Subject: scsi: target: Clear cmd_cnt when initial counter enrollment fails When target_get_sess_cmd() fails during session shutdown because percpu_ref_tryget_live() returns false, the command keeps the se_cmd->cmd_cnt pointer that __target_init_cmd() assigned earlier without owning a reference. Final release through target_release_cmd_kref() then issues an unmatched percpu_ref_put(). Commit 8e288be8606a ("scsi: target: Pass in cmd counter to use during cmd setup") moved the cmd_cnt assignment ahead of the reference acquisition. Clear se_cmd->cmd_cnt whenever the initial target_get_sess_cmd() fails in target_init_cmd() and target_submit_tmr(), so release performs exactly one matching put per acquired reference. Fixes: 8e288be8606a ("scsi: target: Pass in cmd counter to use during cmd setup") Signed-off-by: Leon Romanovsky Reviewed-by: Mike Christie Link: https://patch.msgid.link/20260722-reference-count-underflow-in-target-v1-1-63ab664f12fd@nvidia.com Signed-off-by: Martin K. Petersen --- drivers/target/target_core_transport.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index fad03a15c969..dcfe94594916 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1734,6 +1734,7 @@ int target_init_cmd(struct se_cmd *se_cmd, struct se_session *se_sess, u32 data_length, int task_attr, int data_dir, int flags) { struct se_portal_group *se_tpg; + int ret; se_tpg = se_sess->se_tpg; BUG_ON(!se_tpg); @@ -1763,7 +1764,11 @@ int target_init_cmd(struct se_cmd *se_cmd, struct se_session *se_sess, * necessary for fabrics using TARGET_SCF_ACK_KREF that expect a second * kref_put() to happen during fabric packet acknowledgement. */ - return target_get_sess_cmd(se_cmd, flags & TARGET_SCF_ACK_KREF); + ret = target_get_sess_cmd(se_cmd, flags & TARGET_SCF_ACK_KREF); + if (ret) + se_cmd->cmd_cnt = NULL; + + return ret; } EXPORT_SYMBOL_GPL(target_init_cmd); @@ -2039,8 +2044,10 @@ int target_submit_tmr(struct se_cmd *se_cmd, struct se_session *se_sess, * allocation failure. */ ret = core_tmr_alloc_req(se_cmd, fabric_tmr_ptr, tm_type, gfp); - if (ret < 0) + if (ret < 0) { + se_cmd->cmd_cnt = NULL; return -ENOMEM; + } if (tm_type == TMR_ABORT_TASK) se_cmd->se_tmr_req->ref_task_tag = tag; @@ -2048,6 +2055,7 @@ int target_submit_tmr(struct se_cmd *se_cmd, struct se_session *se_sess, /* See target_submit_cmd for commentary */ ret = target_get_sess_cmd(se_cmd, flags & TARGET_SCF_ACK_KREF); if (ret) { + se_cmd->cmd_cnt = NULL; core_tmr_release_req(se_cmd->se_tmr_req); return ret; } -- cgit v1.2.3 From 3bd438a58e910db5dc369aa25dfed1fc95f1b596 Mon Sep 17 00:00:00 2001 From: Hariprasad Kelam Date: Wed, 22 Jul 2026 13:42:29 +0530 Subject: octeontx2-af: Block VFs from clobbering special CGX PKIND state PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must not reset the LMAC RX PKIND or default TX parse config over the PF setup. Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. Fixes: 94d942c5fb97 ("octeontx2-af: Config pkind for CGX mapped PFs") Cc: Geetha sowjanya Signed-off-by: Hariprasad Kelam Signed-off-by: Ratheesh Kannoth Link: https://patch.msgid.link/20260722081229.1653619-1-rkannoth@marvell.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 12 ++++ drivers/net/ethernet/marvell/octeontx2/af/cgx.h | 1 + drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 2 + .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 79 ++++++++++++++++++++++ .../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 22 ++++-- .../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 29 +++++--- 6 files changed, 131 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c index 2e94d5105016..f5fd6138c352 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c @@ -518,6 +518,18 @@ int cgx_set_pkind(void *cgxd, u8 lmac_id, int pkind) return 0; } +int cgx_get_pkind(void *cgxd, u8 lmac_id, int *pkind) +{ + struct cgx *cgx = cgxd; + + if (!is_lmac_valid(cgx, lmac_id)) + return -ENODEV; + + *pkind = cgx_read(cgx, lmac_id, cgx->mac_ops->rxid_map_offset); + *pkind = *pkind & 0x3F; + return 0; +} + static u8 cgx_get_lmac_type(void *cgxd, int lmac_id) { struct cgx *cgx = cgxd; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h index 92ccf343dfe0..8411a75dd723 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h @@ -141,6 +141,7 @@ int cgx_get_cgxid(void *cgxd); int cgx_get_lmac_cnt(void *cgxd); void *cgx_get_pdata(int cgx_id); int cgx_set_pkind(void *cgxd, u8 lmac_id, int pkind); +int cgx_get_pkind(void *cgxd, u8 lmac_id, int *pkind); int cgx_lmac_evh_register(struct cgx_event_cb *cb, void *cgxd, int lmac_id); int cgx_lmac_evh_unregister(void *cgxd, int lmac_id); int cgx_get_tx_stats(void *cgxd, int lmac_id, int idx, u64 *tx_stat); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index 7f3505ae6860..9d5b7b51bdfa 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -1115,6 +1115,8 @@ void npc_read_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam, u8 *intf, u8 *ena); int npc_config_cntr_default_entries(struct rvu *rvu, bool enable); bool is_cgx_config_permitted(struct rvu *rvu, u16 pcifunc); +bool rvu_cgx_check_permission_and_set_pkind(struct rvu *rvu, u16 pcifunc, int pkind); +bool rvu_cgx_is_pkind_config_permitted(struct rvu *rvu, u16 pcifunc); bool is_mac_feature_supported(struct rvu *rvu, int pf, int feature); u32 rvu_cgx_get_fifolen(struct rvu *rvu); void *rvu_first_cgx_pdata(struct rvu *rvu); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c index 4ff3935ed3fe..87d21889dc49 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c @@ -1355,3 +1355,82 @@ void rvu_mac_reset(struct rvu *rvu, u16 pcifunc) if (mac_ops->mac_reset(cgxd, lmac, !is_vf(pcifunc))) dev_err(rvu->dev, "Failed to reset MAC\n"); } + +/* Do not allow CGX-mapped VFs to overwrite PKIND when special parse kinds + * (HiGig, EDSA, etc.) are in use on the shared LMAC. VFs must not program + * NPC_TX_DEF_PKIND on NIX_AF_LFX_TX_PARSE_CFG in that case: the PF owns + * parse mode and no separate NPC_TX_HIGIG_PKIND is installed on the VF LF. + * TX-parse callers skip the write when denied; rvu_lf_reset() clears each LF + * before alloc so the next permitted owner programs NPC_TX_DEF_PKIND. + */ +bool rvu_cgx_is_pkind_config_permitted(struct rvu *rvu, u16 pcifunc) +{ + int pf, err, rxpkind; + u8 cgx_id, lmac_id; + void *cgxd; + + pf = rvu_get_pf(rvu->pdev, pcifunc); + + if (!(pcifunc & RVU_PFVF_FUNC_MASK)) + return true; + + if (!is_pf_cgxmapped(rvu, pf)) + return true; + + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + cgxd = rvu_cgx_pdata(cgx_id, rvu); + err = cgx_get_pkind(cgxd, lmac_id, &rxpkind); + if (err) + return false; + + switch (rxpkind) { + case NPC_RX_HIGIG_PKIND: + case NPC_RX_EDSA_PKIND: + return false; + default: + return true; + } +} + +/* Do not allow CGX-mapped VFs to overwrite PKIND when special parse kinds + * (HiGig, EDSA, etc.) are in use on the shared LMAC. + */ +bool rvu_cgx_check_permission_and_set_pkind(struct rvu *rvu, u16 pcifunc, int pkind) +{ + int pf, err, rxpkind; + u8 cgx_id, lmac_id; + struct cgx *cgxd; + + pf = rvu_get_pf(rvu->pdev, pcifunc); + + if (!is_pf_cgxmapped(rvu, pf)) + return false; + + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + cgxd = rvu_cgx_pdata(cgx_id, rvu); + + mutex_lock(&cgxd->lock); + if (!is_vf(pcifunc)) + goto set; + + err = cgx_get_pkind(cgxd, lmac_id, &rxpkind); + if (err) + goto err; + + switch (rxpkind) { + case NPC_RX_HIGIG_PKIND: + case NPC_RX_EDSA_PKIND: + goto err; + default: + break; + } + +set: + cgx_set_pkind(rvu_cgx_pdata(cgx_id, rvu), lmac_id, pkind); + mutex_unlock(&cgxd->lock); + return true; + +err: + mutex_unlock(&cgxd->lock); + return false; +} diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index 6a0ce2665031..964bcaae098e 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -363,8 +363,8 @@ static int nix_interface_init(struct rvu *rvu, u16 pcifunc, int type, int nixlf, pfvf->tx_chan_cnt = 1; rsp->tx_link = cgx_id * hw->lmac_per_cgx + lmac_id; - cgx_set_pkind(rvu_cgx_pdata(cgx_id, rvu), lmac_id, pkind); - rvu_npc_set_pkind(rvu, pkind, pfvf); + if (rvu_cgx_check_permission_and_set_pkind(rvu, pcifunc, pkind)) + rvu_npc_set_pkind(rvu, pkind, pfvf); break; case NIX_INTF_TYPE_LBK: vf = (pcifunc & RVU_PFVF_FUNC_MASK) - 1; @@ -1505,13 +1505,15 @@ int rvu_mbox_handler_nix_lf_alloc(struct rvu *rvu, struct nix_lf_alloc_req *req, struct nix_lf_alloc_rsp *rsp) { - int nixlf, qints, hwctx_size, intf, rc = 0; + int nixlf, qints, hwctx_size, intf, rc = 0, pf; u16 bcast, mcast, promisc, ucast; struct rvu_hwinfo *hw = rvu->hw; u16 pcifunc = req->hdr.pcifunc; + u8 cgx_id = 0, lmac_id = 0; bool rules_created = false; struct rvu_block *block; struct rvu_pfvf *pfvf; + struct cgx *cgxd; u64 cfg, ctx_cfg; int blkaddr; @@ -1685,8 +1687,20 @@ int rvu_mbox_handler_nix_lf_alloc(struct rvu *rvu, rvu_write64(rvu, blkaddr, NIX_AF_LFX_RX_CFG(nixlf), req->rx_cfg); /* Configure pkind for TX parse config */ + + pf = rvu_get_pf(rvu->pdev, pcifunc); cfg = NPC_TX_DEF_PKIND; - rvu_write64(rvu, blkaddr, NIX_AF_LFX_TX_PARSE_CFG(nixlf), cfg); + + if (is_pf_cgxmapped(rvu, pf) && is_vf(pcifunc)) { + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + cgxd = rvu_cgx_pdata(cgx_id, rvu); + mutex_lock(&cgxd->lock); + if (rvu_cgx_is_pkind_config_permitted(rvu, pcifunc)) + rvu_write64(rvu, blkaddr, NIX_AF_LFX_TX_PARSE_CFG(nixlf), cfg); + mutex_unlock(&cgxd->lock); + } else { + rvu_write64(rvu, blkaddr, NIX_AF_LFX_TX_PARSE_CFG(nixlf), cfg); + } if (is_rep_dev(rvu, pcifunc)) { pfvf->tx_chan_base = RVU_SWITCH_LBK_CHAN; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index c7bc0b3a29b9..38554d51164e 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -19,6 +19,7 @@ #include "cn20k/npc.h" #include "rvu_npc.h" #include "cn20k/reg.h" +#include "lmac_common.h" #define RSVD_MCAM_ENTRIES_PER_PF 3 /* Broadcast, Promisc and AllMulticast */ #define RSVD_MCAM_ENTRIES_PER_NIXLF 1 /* Ucast for LFs */ @@ -4200,10 +4201,11 @@ int rvu_npc_set_parse_mode(struct rvu *rvu, u16 pcifunc, u64 mode, u8 dir, { struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, pcifunc); - int blkaddr, nixlf, rc, intf_mode; int pf = rvu_get_pf(rvu->pdev, pcifunc); + int blkaddr, nixlf, rc, intf_mode; + u8 cgx_id = 0, lmac_id = 0; u64 rxpkind, txpkind; - u8 cgx_id, lmac_id; + struct cgx *cgxd; /* use default pkind to disable edsa/higig */ rxpkind = rvu_npc_get_pkind(rvu, pf); @@ -4227,12 +4229,8 @@ int rvu_npc_set_parse_mode(struct rvu *rvu, u16 pcifunc, u64 mode, u8 dir, /* rx pkind set req valid only for cgx mapped PFs */ if (!is_cgx_config_permitted(rvu, pcifunc)) return 0; - rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); - - rc = cgx_set_pkind(rvu_cgx_pdata(cgx_id, rvu), lmac_id, - rxpkind); - if (rc) - return rc; + if (!rvu_cgx_check_permission_and_set_pkind(rvu, pcifunc, rxpkind)) + return -EINVAL; } if (dir & PKIND_TX) { @@ -4241,8 +4239,19 @@ int rvu_npc_set_parse_mode(struct rvu *rvu, u16 pcifunc, u64 mode, u8 dir, if (rc) return rc; - rvu_write64(rvu, blkaddr, NIX_AF_LFX_TX_PARSE_CFG(nixlf), - txpkind); + if (is_pf_cgxmapped(rvu, pf) && is_vf(pcifunc)) { + rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, + &lmac_id); + cgxd = rvu_cgx_pdata(cgx_id, rvu); + mutex_lock(&cgxd->lock); + if (rvu_cgx_is_pkind_config_permitted(rvu, pcifunc)) + rvu_write64(rvu, blkaddr, NIX_AF_LFX_TX_PARSE_CFG(nixlf), + txpkind); + mutex_unlock(&cgxd->lock); + } else { + rvu_write64(rvu, blkaddr, NIX_AF_LFX_TX_PARSE_CFG(nixlf), + txpkind); + } } pfvf->intf_mode = intf_mode; -- cgit v1.2.3 From 356d8241cf3c7b07a4a491dbab43b5a41513ca86 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Tue, 28 Jul 2026 13:13:11 +0200 Subject: ata: libata-core: Disable LPM on some WD drives According to a user report WDC WD100EFGX-68CPLN0 and WDC WD102KFBX-68M95N0 have problems with LPM. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220693 Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal --- drivers/ata/libata-core.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c43bd28b20b1..15781b4f0489 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4413,6 +4413,14 @@ static const struct ata_dev_quirks_entry __ata_dev_quirks[] = { { "WDC WD3000JD-*", NULL, ATA_QUIRK_WD_BROKEN_LPM }, { "WDC WD3200JD-*", NULL, ATA_QUIRK_WD_BROKEN_LPM }, + /* + * WD drives with LPM issues (irrespective of supported SATA speeds). + * (Unlike ATA_QUIRK_WD_BROKEN_LPM, which is only applied if the drive + * exposes SATA Gen1 speed support, and SATA Gen1 speed support only.) + */ + { "WDC WD100EFGX-68CPLN0", NULL, ATA_QUIRK_NOLPM }, + { "WDC WD102KFBX-68M95N0", NULL, ATA_QUIRK_NOLPM }, + /* * This sata dom device goes on a walkabout when the ATA_LOG_DIRECTORY * log page is accessed. Ensure we never ask for this log page with -- cgit v1.2.3 From d549df8a0ace611bff0a336a907f93420648b462 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Tue, 28 Jul 2026 13:13:12 +0200 Subject: ata: libata-core: Disable LPM on WD Green 2.5 480GB According to a user report, the WD Green 2.5 480GB has problems with LPM. Link: https://lore.kernel.org/linux-ide/CAGiKK17Fg4SgS+y0GzD3new44QzD_yPZU5V3ZeHdUr9mFnfn1Q@mail.gmail.com/ Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 15781b4f0489..961d03fbc4d9 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4420,6 +4420,7 @@ static const struct ata_dev_quirks_entry __ata_dev_quirks[] = { */ { "WDC WD100EFGX-68CPLN0", NULL, ATA_QUIRK_NOLPM }, { "WDC WD102KFBX-68M95N0", NULL, ATA_QUIRK_NOLPM }, + { "WD Green 2.5 480GB", NULL, ATA_QUIRK_NOLPM }, /* * This sata dom device goes on a walkabout when the ATA_LOG_DIRECTORY -- cgit v1.2.3 From 3fd70e96914d761c17c376aadd0b0d1a3c9badba Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Tue, 28 Jul 2026 13:38:42 +0200 Subject: ata: libata-sata: fix ata_scsi_lpm_supported() iteration The inner loop of ata_scsi_lpm_supported() uses the wrong variable when iterating. It should obviously use the link that we are currently iterating over, rather than always using the host link. ata_scsi_lpm_supported() is used to control if a user should be allowed to change lpm policy (from the default) via sysfs. Thus, this bug could potentially disallow users to change the LPM policy for certain SATA devices via sysfs. Cc: stable@vger.kernel.org Fixes: 0060beec0bfa ("ata: libata-sata: Add link_power_management_supported sysfs attribute") Reported-by: Sashiko Link: https://lore.kernel.org/linux-ide/20260728112200.B99F21F000E9@smtp.kernel.org/ Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal --- drivers/ata/libata-sata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index b0706c30da05..ad40f516c6d4 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -913,7 +913,7 @@ static bool ata_scsi_lpm_supported(struct ata_port *ap) return false; ata_for_each_link(link, ap, EDGE) { - ata_for_each_dev(dev, &ap->link, ENABLED) { + ata_for_each_dev(dev, link, ENABLED) { if (dev->quirks & ATA_QUIRK_NOLPM) return false; } -- cgit v1.2.3 From ccff8c92571500fcfed21281e33daaf645bf692f Mon Sep 17 00:00:00 2001 From: Chandrakanth Patil Date: Fri, 24 Jul 2026 23:22:31 +0530 Subject: scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit mpi3mr_fault_uevent_emit() runs from the fault watchdog and reset paths where host I/O may already be blocked. GFP_KERNEL allocations here, both the local kzalloc_obj() and the ones inside kobject_uevent_env() itself, can trigger reclaim that waits on that blocked I/O and deadlock. Use memalloc_noio_save()/restore() to cover the whole call instead of just the local allocation. Fixes: ec54b348f274 ("scsi: mpi3mr: Record and report controller firmware faults") Reported-by: sashiko-bot Closes: https://sashiko.dev/#/patchset/20260724164630.924288-1-chandrakanth.patil%40broadcom.com Signed-off-by: Chandrakanth Patil Link: https://patch.msgid.link/20260724175231.935192-1-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen --- drivers/scsi/mpi3mr/mpi3mr_fw.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index 31b19ed1528e..681868716ebd 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -9,6 +9,7 @@ #include "mpi3mr.h" #include +#include static int mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type, u16 reset_reason); @@ -1287,11 +1288,14 @@ out_failed: static void mpi3mr_fault_uevent_emit(struct mpi3mr_ioc *mrioc) { struct kobj_uevent_env *env; + unsigned int noio_flag; int ret; + noio_flag = memalloc_noio_save(); + env = kzalloc_obj(*env); if (!env) - return; + goto out_restore; ret = add_uevent_var(env, "DRIVER=%s", mrioc->driver_name); if (ret) @@ -1326,7 +1330,8 @@ static void mpi3mr_fault_uevent_emit(struct mpi3mr_ioc *mrioc) out_free: kfree(env); - +out_restore: + memalloc_noio_restore(noio_flag); } /** -- cgit v1.2.3 From 0279fd451a9971c0d5b959fc59f3e11b55e1694e Mon Sep 17 00:00:00 2001 From: Ao Sun Date: Thu, 23 Jul 2026 03:45:30 +0000 Subject: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL pointer dereference in the device teardown path if ufs_rpmb_probe() fails. Fixes: b06b8c421485 ("scsi: ufs: core: Add OP-TEE based RPMB driver for UFS devices") Co-developed-by: Jiazi Li Signed-off-by: Jiazi Li Signed-off-by: Ao Sun Reviewed-by: Bean Huo Link: https://patch.msgid.link/20260723034440.217-1-ao.sun@transsion.com Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufs-rpmb.c | 2 -- drivers/ufs/core/ufshcd.c | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ufs/core/ufs-rpmb.c b/drivers/ufs/core/ufs-rpmb.c index ffad049872b9..62120dc2e9da 100644 --- a/drivers/ufs/core/ufs-rpmb.c +++ b/drivers/ufs/core/ufs-rpmb.c @@ -152,8 +152,6 @@ int ufs_rpmb_probe(struct ufs_hba *hba) return -EINVAL; } - INIT_LIST_HEAD(&hba->rpmbs); - struct rpmb_descr descr = { .type = RPMB_TYPE_UFS, .route_frames = ufs_rpmb_route_frames, diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 34228beb3f59..13e6357a8bbb 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -10958,6 +10958,7 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) hba->nop_out_timeout = NOP_OUT_TIMEOUT; ufshcd_set_sg_entry_size(hba, sizeof(struct ufshcd_sg_entry)); INIT_LIST_HEAD(&hba->clk_list_head); + INIT_LIST_HEAD(&hba->rpmbs); spin_lock_init(&hba->outstanding_lock); *hba_handle = hba; -- cgit v1.2.3 From d0199ae1666ff9ae2d1d568d64c3430d4c47f0e5 Mon Sep 17 00:00:00 2001 From: Sonali Pradhan Date: Tue, 28 Jul 2026 20:17:16 +0000 Subject: ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set When a USB audio endpoint requests full packet transfers via the fill_max descriptor flag, data_ep_set_params() promotes ep->curpacksize to ep->maxpacksize. However, maxsize is left at the original sample-rate derived value. Since u->buffer_size is allocated as maxsize * packets, the resulting DMA buffer is far too small for the requested transfer length. When the USB host controller streams up to curpacksize bytes per packet, it writes past the end of the buffer via DMA, corrupting kernel heap memory. Update maxsize to curpacksize when fill_max is set so that the allocated DMA buffer size matches the actual transfer request size. [ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] Fixes: 8fdff6a319e7 ("ALSA: snd-usb: implement new endpoint streaming model") Cc: stable@vger.kernel.org Assisted-by: Jetski:Gemini-3.6-Flash Signed-off-by: Sonali Pradhan Link: https://patch.msgid.link/20260728201716.2347726-1-sonalipradhan@google.com Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 24cd7692bd01..91611d0a4e48 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -1168,10 +1168,12 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep) << (16 - ep->datainterval); } - if (ep->fill_max) + if (ep->fill_max) { ep->curpacksize = ep->maxpacksize; - else + maxsize = ep->curpacksize; + } else { ep->curpacksize = maxsize; + } if (snd_usb_get_speed(chip->dev) != USB_SPEED_FULL) { packs_per_ms = 8 >> ep->datainterval; -- cgit v1.2.3 From 8d7a30c50c2e58a6839634ed0acde14466d1dc61 Mon Sep 17 00:00:00 2001 From: Sonali Pradhan Date: Tue, 28 Jul 2026 20:24:32 +0000 Subject: ALSA: usb-audio: Clamp frame size in implicit-feedback mode snd_usb_handle_sync_urb() scales received sync packet sizes by the sender's stride and stores the result directly in out_packet->packet_size[i]. If a connected USB device sends an oversized sync packet, this frame count can exceed ep->maxframesize. The un-clamped frame count then propagates to the playback endpoint queue, potentially driving packet transfers beyond the endpoint's hardware frame limits. Cap the calculated frame count against ep->maxframesize in snd_usb_handle_sync_urb() to prevent oversized packets from entering the playback queue. Fixes: 28acb12014fb ("ALSA: usb-audio: use sender stride for implicit feedback") Cc: stable@vger.kernel.org Assisted-by: Jetski:Gemini-3.6-Flash Signed-off-by: Sonali Pradhan Link: https://patch.msgid.link/20260728202432.2354994-1-sonalipradhan@google.com Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 91611d0a4e48..dca06ba1c67e 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -1819,11 +1819,13 @@ static void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, out_packet->packets = in_ctx->packets; for (i = 0; i < in_ctx->packets; i++) { - if (urb->iso_frame_desc[i].status == 0) - out_packet->packet_size[i] = + if (urb->iso_frame_desc[i].status == 0) { + unsigned int frames = urb->iso_frame_desc[i].actual_length / sender->stride; - else + out_packet->packet_size[i] = min(frames, ep->maxframesize); + } else { out_packet->packet_size[i] = 0; + } } spin_unlock_irqrestore(&ep->lock, flags); -- cgit v1.2.3 From e93bb6f3acec5b70a5567efe78f1a96148a7291f Mon Sep 17 00:00:00 2001 From: Mikhail Gavrilov Date: Wed, 29 Jul 2026 03:22:39 +0500 Subject: ALSA: usb-audio: Add GET_SAMPLE_RATE quirk for C-Media CM6206 The C-Media CM6206 (0d8c:0102) truncates the three-byte sample rate it returns for UAC_GET_CUR to its two low bytes. After the rate has been set to 96000 (0x017700) the device reports back 30464 (0x007700). At probe time the driver initializes every altsetting to its maximum rate, so altsetting 5 is set to 96000 and the warning appears on each plug-in, before anything has opened the device: usb 3-1.3: 1:5 Set sample rate 96000, clock 0 usb 3-1.3: current rate 30464 is different from the runtime rate 96000 That altsetting is the one parse_audio_format_rates_v1() already fixes up for this chip, so this affects every CM6206. Only the read-back is broken, the rate itself is applied: a 1 kHz sine rendered at 96 kHz is recovered at 1000.2 Hz, and a silent fallback to 48000 would have been reported as 0x00bb80 rather than as the low half of the requested rate. Add a QUIRK_FLAG_GET_SAMPLE_RATE entry for the device so the read-back is skipped. Setting the same flag through the quirk_flags module parameter makes the warning disappear while the 96000 init still happens. Signed-off-by: Mikhail Gavrilov Link: https://patch.msgid.link/20260728222239.62749-1-mikhail.v.gavrilov@gmail.com Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 40aa40fccb46..d2a111ee50ab 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2347,6 +2347,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE), DEVICE_FLG(0x0d8c, 0x0014, /* C-Media */ QUIRK_FLAG_CTL_MSG_DELAY_1M | QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE), + DEVICE_FLG(0x0d8c, 0x0102, /* C-Media CM6206 */ + QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x0e0b, 0xfa01, /* Feaulle Rainbow */ QUIRK_FLAG_GET_SAMPLE_RATE | QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE), DEVICE_FLG(0x0ecb, 0x205c, /* JBL Quantum610 Wireless */ -- cgit v1.2.3 From 630c45e92db44b738d1e9224c5f3c032c76a33ca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Pragosa?= Date: Tue, 28 Jul 2026 23:11:25 +0100 Subject: ALSA: hda/realtek: Add mute LED quirk for HP Victus 16-e0xxx (MB 88ED) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add subsystem ID 103c:88ed to the existing HP Victus 16-e0xxx mute LED quirk list. The HP Victus 16-e0xxx with subsystem ID 103c:88ed uses the same mute LED coefficient configuration as the already supported 103c:88eb variant. The mute LED was verified by manually toggling coefficient index 0x0b (bit 3) using hda-verb. After adding the quirk, the LED is registered as hda::mute and follows the audio mute state. Signed-off-by: André Pragosa Link: https://patch.msgid.link/20260728221129.14680-2-pragosa512@gmail.com Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index f620cd429f20..48a2e7f2ebb1 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -7222,6 +7222,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x88d1, "HP Pavilion 15-eh1xxx (mainboard 88D1)", ALC245_FIXUP_HP_MUTE_LED_V1_COEFBIT), SND_PCI_QUIRK(0x103c, 0x88dd, "HP Pavilion 15z-ec200", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x88eb, "HP Victus 16-e0xxx", ALC245_FIXUP_HP_MUTE_LED_V2_COEFBIT), + SND_PCI_QUIRK(0x103c, 0x88ed, "HP Victus 16-e0xxx (MB 88ED)", + ALC245_FIXUP_HP_MUTE_LED_V2_COEFBIT), SND_PCI_QUIRK(0x103c, 0x88ee, "HP Victus 16-e0xxx (MB 88EE)", ALC245_FIXUP_HP_MUTE_LED_COEFBIT), SND_PCI_QUIRK(0x103c, 0x8902, "HP OMEN 16", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x890e, "HP 255 G8 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), -- cgit v1.2.3 From d2fb981384b3a45f690616d550b29046e8ad16a4 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Tue, 28 Jul 2026 07:58:34 +0200 Subject: can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking syzbot is still reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem. A debug printk() patch in linux-next-20260508 identified that there is dev_hold()/dev_put() imbalance in j1939_priv management. Call trace for vcan0[26] +4 at __dev_hold include/linux/netdevice.h:4470 [inline] netdev_hold include/linux/netdevice.h:4513 [inline] dev_hold include/linux/netdevice.h:4536 [inline] j1939_priv_create net/can/j1939/main.c:140 [inline] j1939_netdev_start+0x36b/0xc10 net/can/j1939/main.c:268 j1939_sk_bind+0x853/0xb30 net/can/j1939/socket.c:506 __sys_bind_socket net/socket.c:1948 [inline] __sys_bind+0x2e9/0x410 net/socket.c:1979 Call trace for vcan0[28] -3 at __dev_put include/linux/netdevice.h:4456 [inline] netdev_put include/linux/netdevice.h:4523 [inline] dev_put include/linux/netdevice.h:4548 [inline] __j1939_priv_release net/can/j1939/main.c:166 [inline] kref_put include/linux/kref.h:65 [inline] j1939_priv_put+0x128/0x270 net/can/j1939/main.c:172 j1939_sk_sock_destruct+0x52/0x90 net/can/j1939/socket.c:388 __sk_destruct+0x8d/0x9d0 net/core/sock.c:2352 rcu_do_batch kernel/rcu/tree.c:2617 [inline] rcu_core kernel/rcu/tree.c:2869 [inline] rcu_cpu_kthread+0x99e/0x1470 kernel/rcu/tree.c:2957 smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 This refcount leak in j1939_priv might be caused by a refcount leak in j1939_{session,ecu} because j1939_{session,ecu} holds a ref on j1939_priv. For further investigation using upstream kernels, enable netdevice_tracker in j1939_{priv,session,ecu} management. Signed-off-by: Tetsuo Handa Acked-by: Oleksij Rempel Signed-off-by: Oleksij Rempel Link: https://patch.msgid.link/20260728055835.1151785-2-o.rempel@pengutronix.de Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- net/can/j1939/bus.c | 2 ++ net/can/j1939/j1939-priv.h | 3 +++ net/can/j1939/main.c | 8 ++++---- net/can/j1939/transport.c | 2 ++ 4 files changed, 11 insertions(+), 4 deletions(-) diff --git a/net/can/j1939/bus.c b/net/can/j1939/bus.c index dc374286eeb6..cdc3c0a71937 100644 --- a/net/can/j1939/bus.c +++ b/net/can/j1939/bus.c @@ -20,6 +20,7 @@ static void __j1939_ecu_release(struct kref *kref) struct j1939_priv *priv = ecu->priv; list_del(&ecu->list); + netdev_put(priv->ndev, &ecu->priv_dev_tracker); kfree(ecu); j1939_priv_put(priv); } @@ -155,6 +156,7 @@ struct j1939_ecu *j1939_ecu_create_locked(struct j1939_priv *priv, name_t name) if (!ecu) return ERR_PTR(-ENOMEM); kref_init(&ecu->kref); + netdev_hold(priv->ndev, &ecu->priv_dev_tracker, gfp_any()); ecu->addr = J1939_IDLE_ADDR; ecu->name = name; diff --git a/net/can/j1939/j1939-priv.h b/net/can/j1939/j1939-priv.h index 81f58924b4ac..cf26352d1d8c 100644 --- a/net/can/j1939/j1939-priv.h +++ b/net/can/j1939/j1939-priv.h @@ -38,6 +38,7 @@ struct j1939_ecu { struct hrtimer ac_timer; struct kref kref; struct j1939_priv *priv; + netdevice_tracker priv_dev_tracker; /* count users, to help transport protocol decide for interaction */ int nusers; @@ -60,6 +61,7 @@ struct j1939_priv { rwlock_t lock; struct net_device *ndev; + netdevice_tracker dev_tracker; /* list of 256 ecu ptrs, that cache the claimed addresses. * also protected by the above lock @@ -230,6 +232,7 @@ enum j1939_session_state { struct j1939_session { struct j1939_priv *priv; + netdevice_tracker priv_dev_tracker; struct list_head active_session_list_entry; struct list_head sk_session_queue_entry; struct kref kref; diff --git a/net/can/j1939/main.c b/net/can/j1939/main.c index 9937c04241bc..5e5e6c228f22 100644 --- a/net/can/j1939/main.c +++ b/net/can/j1939/main.c @@ -137,7 +137,7 @@ static struct j1939_priv *j1939_priv_create(struct net_device *ndev) priv->ndev = ndev; kref_init(&priv->kref); kref_init(&priv->rx_kref); - dev_hold(ndev); + netdev_hold(ndev, &priv->dev_tracker, GFP_KERNEL); netdev_dbg(priv->ndev, "%s : 0x%p\n", __func__, priv); @@ -163,7 +163,7 @@ static void __j1939_priv_release(struct kref *kref) WARN_ON_ONCE(!list_empty(&priv->ecus)); WARN_ON_ONCE(!list_empty(&priv->j1939_socks)); - dev_put(ndev); + netdev_put(ndev, &priv->dev_tracker); kfree(priv); } @@ -281,7 +281,7 @@ struct j1939_priv *j1939_netdev_start(struct net_device *ndev) */ kref_get(&priv_new->rx_kref); mutex_unlock(&j1939_netdev_lock); - dev_put(ndev); + netdev_put(ndev, &priv->dev_tracker); kfree(priv); return priv_new; } @@ -298,7 +298,7 @@ struct j1939_priv *j1939_netdev_start(struct net_device *ndev) j1939_priv_set(ndev, NULL); mutex_unlock(&j1939_netdev_lock); - dev_put(ndev); + netdev_put(ndev, &priv->dev_tracker); kfree(priv); return ERR_PTR(ret); diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c index 8a31cb23bc76..98f96362b20f 100644 --- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -283,6 +283,7 @@ static void j1939_session_destroy(struct j1939_session *session) kfree_skb(skb); } __j1939_session_drop(session); + netdev_put(session->priv->ndev, &session->priv_dev_tracker); j1939_priv_put(session->priv); kfree(session); } @@ -1526,6 +1527,7 @@ static struct j1939_session *j1939_session_new(struct j1939_priv *priv, INIT_LIST_HEAD(&session->active_session_list_entry); INIT_LIST_HEAD(&session->sk_session_queue_entry); kref_init(&session->kref); + netdev_hold(priv->ndev, &session->priv_dev_tracker, gfp_any()); j1939_priv_get(priv); session->priv = priv; -- cgit v1.2.3 From eb96c58907922546e415e545fe9a14ea63b02719 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 28 Jul 2026 07:58:35 +0200 Subject: can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer Zero the allocated buffer in j1939_session_fresh_new() to ensure it contains no residual data. While there is a potential performance impact if users allocate maximum sized ETP buffers, most real-world use cases are not noticeably affected since the maximum known buffer size is typically around 65K. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: Ji'an Zhou Message-ID: Signed-off-by: Oleksij Rempel Link: https://patch.msgid.link/20260728055835.1151785-3-o.rempel@pengutronix.de Cc: stable@kernel.org [mkl: add Message-ID] Signed-off-by: Marc Kleine-Budde --- net/can/j1939/transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c index 98f96362b20f..8fcfd13e5e6f 100644 --- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -1581,7 +1581,7 @@ j1939_session *j1939_session_fresh_new(struct j1939_priv *priv, } /* alloc data area */ - skb_put(skb, size); + skb_put_zero(skb, size); /* skb is recounted in j1939_session_new() */ return session; } -- cgit v1.2.3 From 050f010f920da17c1044a4f174766ad553e770b6 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Fri, 24 Jul 2026 20:15:25 +0200 Subject: can: isotp: fix timer drain order, wakeup handling and tx_gen ordering This patch is a follow-up to commit cf070fe33bfb ("can: isotp: serialize TX state transitions under so->rx_lock") which addresses following sashiko-bot findings: - isotp_sendmsg(): drain so->txfrtimer first so a stale callback can't re-arm echotimer after the claim - isotp_release(): wake so->wait after forcing ISOTP_SHUTDOWN so a sleeping sendmsg() claim isn't stranded - isotp_sendmsg(): have both wait_event_interruptible() calls in isotp_sendmsg() also wake on ISOTP_SHUTDOWN and do not return claim to IDLE to avoid corrupting a concurrent isotp_release() process. - isotp_sendmsg(): handle potential claim of a new transfer when the wait_event_interruptible() call returns in CAN_ISOTP_WAIT_TX_DONE mode. Don't touch timers and states of the new transfer if a new thread incremented so->tx_gen before getting the lock at err_event_drop. - isotp_sendmsg(): handle a stuck can_send() and omit timer and state changes if a new transfer was claimed. wait_tx_done() returns the error recorded in so->tx_result[], tagged with the caller's own generation. - isotp_tx_timeout(): on a claimed timeout, record the ECOMM error for the timed-out transfer's own generation in so->tx_result[]; sk->sk_err is raised unconditionally, same as every other error path here. - isotp_tx_gen_done()/isotp_tx_timeout(): always read tx.state (acquire) before tx_gen - the reverse order let a weakly ordered CPU pair a fresh tx.state with a stale tx_gen/tx_result slot. - isotp_sendmsg(): wait_tx_done: drain sk_err via sock_error() once we have read the result from so->tx_result[], so an already-reported error doesn't stay latched for a later poll()/SO_ERROR. Also align the remaining lock-free so->tx.state/rx.state/cfecho accesses and use skb->hash as unique loopback echo frame indicator. Fixes: cf070fe33bfb ("can: isotp: serialize TX state transitions under so->rx_lock") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260724181525.43556-1-socketcan@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- net/can/isotp.c | 317 ++++++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 230 insertions(+), 87 deletions(-) diff --git a/net/can/isotp.c b/net/can/isotp.c index 54becaf6898f..1f11c66b343c 100644 --- a/net/can/isotp.c +++ b/net/can/isotp.c @@ -127,6 +127,15 @@ MODULE_PARM_DESC(max_pdu_size, "maximum isotp pdu size (default " #define ISOTP_FC_TIMEOUT 1 /* 1 sec */ #define ISOTP_ECHO_TIMEOUT 2 /* 2 secs */ +/* so->tx_result[so->tx_gen % ISOTP_TX_RESULT_SLOTS] holds the packed value + * (err << ISOTP_TX_RESULT_GEN_BITS | gen) for each tx generation slot, so it + * can be handled with a single READ_ONCE()/WRITE_ONCE() access. + */ +#define ISOTP_TX_RESULT_SLOTS 4 +#define ISOTP_TX_RESULT_GEN_BITS 24 +#define ISOTP_TX_RESULT_GEN_MASK ((1U << ISOTP_TX_RESULT_GEN_BITS) - 1) +#define ISOTP_TX_RESULT_ERR_MASK 0xFF + enum { ISOTP_IDLE = 0, ISOTP_WAIT_FIRST_FC, @@ -166,7 +175,8 @@ struct isotp_sock { u32 force_tx_stmin; u32 force_rx_stmin; u32 cfecho; /* consecutive frame echo tag */ - u32 tx_gen; /* generation, bumped per new tx transfer */ + u32 tx_gen; /* transfer generation, increased per new tx transfer */ + u32 tx_result[ISOTP_TX_RESULT_SLOTS]; /* per-generation result slots */ struct tpcon rx, tx; struct list_head notifier; wait_queue_head_t wait; @@ -177,6 +187,65 @@ static LIST_HEAD(isotp_notifier_list); static DEFINE_SPINLOCK(isotp_notifier_lock); static struct isotp_sock *isotp_busy_notifier; +/* increase (24 bit) tx generation value */ +static u32 isotp_inc_tx_gen(u32 gen) +{ + return (gen + 1) & ISOTP_TX_RESULT_GEN_MASK; +} + +/* store 8 bit error and 24 bit tx generation values in packed u32 element */ +static u32 isotp_pack_tx_result(u32 gen, int err) +{ + return gen | ((u32)err << ISOTP_TX_RESULT_GEN_BITS); +} + +/* get the 24 bit tx generation value from the tx result */ +static u32 isotp_get_tx_gen(u32 gen_err) +{ + return gen_err & ISOTP_TX_RESULT_GEN_MASK; +} + +/* get the 8 bit error value from the tx result */ +static u32 isotp_get_tx_err(u32 gen_err) +{ + return (gen_err >> ISOTP_TX_RESULT_GEN_BITS) & ISOTP_TX_RESULT_ERR_MASK; +} + +/* store transfer result in per-generation%4 so->tx_result[] slot */ +static void isotp_set_tx_result(struct isotp_sock *so, u32 gen, int err) +{ + WRITE_ONCE(so->tx_result[gen % ISOTP_TX_RESULT_SLOTS], + isotp_pack_tx_result(gen, err)); +} + +/* fetch the result recorded for 'gen', as a (negative) errno (0 for success) */ +static int isotp_get_tx_result(struct isotp_sock *so, u32 gen) +{ + u32 result = READ_ONCE(so->tx_result[gen % ISOTP_TX_RESULT_SLOTS]); + + if (isotp_get_tx_gen(result) != gen) { + pr_notice_once("can-isotp: tx_result[] slot reused before read\n"); + + /* report failure rather than risk a false success */ + return -ECOMM; + } + + return -(isotp_get_tx_err(result)); +} + +/* true if done, shut down or superseded ('gen' is no longer the active + * transfer). Reads tx.state first (acquire) so tx_gen/tx_result reads + * below see at least what that state write published (common sequence). + */ +static bool isotp_tx_gen_done(struct isotp_sock *so, u32 gen) +{ + /* read tx.state first for the common sequence */ + u32 state = smp_load_acquire(&so->tx.state); + + return state == ISOTP_IDLE || state == ISOTP_SHUTDOWN || + READ_ONCE(so->tx_gen) != gen; +} + static inline struct isotp_sock *isotp_sk(const struct sock *sk) { return (struct isotp_sock *)sk; @@ -199,7 +268,7 @@ static enum hrtimer_restart isotp_rx_timer_handler(struct hrtimer *hrtimer) rxtimer); struct sock *sk = &so->sk; - if (so->rx.state == ISOTP_WAIT_DATA) { + if (READ_ONCE(so->rx.state) == ISOTP_WAIT_DATA) { /* we did not get new data frames in time */ /* report 'connection timed out' */ @@ -208,7 +277,7 @@ static enum hrtimer_restart isotp_rx_timer_handler(struct hrtimer *hrtimer) sk_error_report(sk); /* reset rx state */ - so->rx.state = ISOTP_IDLE; + WRITE_ONCE(so->rx.state, ISOTP_IDLE); } return HRTIMER_NORESTART; @@ -372,20 +441,19 @@ static void isotp_send_cframe(struct isotp_sock *so); static int isotp_rcv_fc(struct isotp_sock *so, struct canfd_frame *cf, int ae) { struct sock *sk = &so->sk; + int tx_err = EBADMSG; /* default for unknown FC status */ - if (so->tx.state != ISOTP_WAIT_FC && - so->tx.state != ISOTP_WAIT_FIRST_FC) + if (READ_ONCE(so->tx.state) != ISOTP_WAIT_FC && + READ_ONCE(so->tx.state) != ISOTP_WAIT_FIRST_FC) return 0; hrtimer_cancel(&so->txtimer); /* isotp_tx_timeout() may have given up on this job while - * hrtimer_cancel() above waited for it to finish; so->rx_lock - * (held by our caller isotp_rcv()) rules out a concurrent claim, - * so a plain recheck is enough here. + * hrtimer_cancel() above waited for it to finish => recheck */ - if (so->tx.state != ISOTP_WAIT_FC && - so->tx.state != ISOTP_WAIT_FIRST_FC) + if (READ_ONCE(so->tx.state) != ISOTP_WAIT_FC && + READ_ONCE(so->tx.state) != ISOTP_WAIT_FIRST_FC) return 1; if ((cf->len < ae + FC_CONTENT_SZ) || @@ -396,13 +464,15 @@ static int isotp_rcv_fc(struct isotp_sock *so, struct canfd_frame *cf, int ae) if (!sock_flag(sk, SOCK_DEAD)) sk_error_report(sk); - so->tx.state = ISOTP_IDLE; + isotp_set_tx_result(so, so->tx_gen, EBADMSG); + /* set to IDLE after publishing tx_result */ + smp_store_release(&so->tx.state, ISOTP_IDLE); wake_up_interruptible(&so->wait); return 1; } /* get static/dynamic communication params from first/every FC frame */ - if (so->tx.state == ISOTP_WAIT_FIRST_FC || + if (READ_ONCE(so->tx.state) == ISOTP_WAIT_FIRST_FC || so->opt.flags & CAN_ISOTP_DYN_FC_PARMS) { so->txfc.bs = cf->data[ae + 1]; so->txfc.stmin = cf->data[ae + 2]; @@ -426,13 +496,13 @@ static int isotp_rcv_fc(struct isotp_sock *so, struct canfd_frame *cf, int ae) so->tx_gap = ktime_add_ns(so->tx_gap, (so->txfc.stmin - 0xF0) * 100000); - so->tx.state = ISOTP_WAIT_FC; + WRITE_ONCE(so->tx.state, ISOTP_WAIT_FC); } switch (cf->data[ae] & 0x0F) { case ISOTP_FC_CTS: so->tx.bs = 0; - so->tx.state = ISOTP_SENDING; + WRITE_ONCE(so->tx.state, ISOTP_SENDING); /* send CF frame and enable echo timeout handling */ hrtimer_start(&so->echotimer, ktime_set(ISOTP_ECHO_TIMEOUT, 0), HRTIMER_MODE_REL_SOFT); @@ -447,14 +517,19 @@ static int isotp_rcv_fc(struct isotp_sock *so, struct canfd_frame *cf, int ae) case ISOTP_FC_OVFLW: /* overflow on receiver side - report 'message too long' */ - sk->sk_err = EMSGSIZE; - if (!sock_flag(sk, SOCK_DEAD)) - sk_error_report(sk); + tx_err = EMSGSIZE; fallthrough; default: - /* stop this tx job */ - so->tx.state = ISOTP_IDLE; + /* reserved/unknown flow status (tx_err defaults to EBADMSG) */ + + sk->sk_err = tx_err; + if (!sock_flag(sk, SOCK_DEAD)) + sk_error_report(sk); + + isotp_set_tx_result(so, so->tx_gen, tx_err); + /* set to IDLE after publishing tx_result */ + smp_store_release(&so->tx.state, ISOTP_IDLE); wake_up_interruptible(&so->wait); } return 0; @@ -467,7 +542,7 @@ static int isotp_rcv_sf(struct sock *sk, struct canfd_frame *cf, int pcilen, struct sk_buff *nskb; hrtimer_cancel(&so->rxtimer); - so->rx.state = ISOTP_IDLE; + WRITE_ONCE(so->rx.state, ISOTP_IDLE); if (!len || len > cf->len - pcilen) return 1; @@ -501,7 +576,7 @@ static int isotp_rcv_ff(struct sock *sk, struct canfd_frame *cf, int ae) int ff_pci_sz; hrtimer_cancel(&so->rxtimer); - so->rx.state = ISOTP_IDLE; + WRITE_ONCE(so->rx.state, ISOTP_IDLE); /* get the used sender LL_DL from the (first) CAN frame data length */ so->rx.ll_dl = padlen(cf->len); @@ -555,7 +630,7 @@ static int isotp_rcv_ff(struct sock *sk, struct canfd_frame *cf, int ae) /* initial setup for this pdu reception */ so->rx.sn = 1; - so->rx.state = ISOTP_WAIT_DATA; + WRITE_ONCE(so->rx.state, ISOTP_WAIT_DATA); /* no creation of flow control frames */ if (so->opt.flags & CAN_ISOTP_LISTEN_MODE) @@ -573,7 +648,7 @@ static int isotp_rcv_cf(struct sock *sk, struct canfd_frame *cf, int ae, struct sk_buff *nskb; int i; - if (so->rx.state != ISOTP_WAIT_DATA) + if (READ_ONCE(so->rx.state) != ISOTP_WAIT_DATA) return 0; /* drop if timestamp gap is less than force_rx_stmin nano secs */ @@ -588,11 +663,9 @@ static int isotp_rcv_cf(struct sock *sk, struct canfd_frame *cf, int ae, hrtimer_cancel(&so->rxtimer); /* isotp_rx_timer_handler() may have raced us for so->rx.state - * while hrtimer_cancel() above waited for it to finish, already - * reporting ETIMEDOUT and resetting the reception; don't process - * this CF into a reassembly that has already been given up on. + * while hrtimer_cancel() above waited for it to finish => recheck */ - if (so->rx.state != ISOTP_WAIT_DATA) + if (READ_ONCE(so->rx.state) != ISOTP_WAIT_DATA) return 1; /* CFs are never longer than the FF */ @@ -613,7 +686,7 @@ static int isotp_rcv_cf(struct sock *sk, struct canfd_frame *cf, int ae, sk_error_report(sk); /* reset rx state */ - so->rx.state = ISOTP_IDLE; + WRITE_ONCE(so->rx.state, ISOTP_IDLE); return 1; } so->rx.sn++; @@ -627,7 +700,7 @@ static int isotp_rcv_cf(struct sock *sk, struct canfd_frame *cf, int ae, if (so->rx.idx >= so->rx.len) { /* we are done */ - so->rx.state = ISOTP_IDLE; + WRITE_ONCE(so->rx.state, ISOTP_IDLE); if ((so->opt.flags & ISOTP_CHECK_PADDING) && check_pad(so, cf, i + 1, so->opt.rxpad_content)) { @@ -698,8 +771,10 @@ static void isotp_rcv(struct sk_buff *skb, void *data) if (so->opt.flags & CAN_ISOTP_HALF_DUPLEX) { /* check rx/tx path half duplex expectations */ - if ((so->tx.state != ISOTP_IDLE && n_pci_type != N_PCI_FC) || - (so->rx.state != ISOTP_IDLE && n_pci_type == N_PCI_FC)) + if ((READ_ONCE(so->tx.state) != ISOTP_IDLE && + n_pci_type != N_PCI_FC) || + (READ_ONCE(so->rx.state) != ISOTP_IDLE && + n_pci_type == N_PCI_FC)) goto out_unlock; } @@ -794,6 +869,7 @@ static void isotp_send_cframe(struct isotp_sock *so) struct canfd_frame *cf; int can_send_ret; int ae = (so->opt.flags & CAN_ISOTP_EXTEND_ADDR) ? 1 : 0; + u32 old_cfecho; dev = dev_get_by_index(sock_net(sk), so->ifindex); if (!dev) @@ -814,6 +890,9 @@ static void isotp_send_cframe(struct isotp_sock *so) csx->can_iif = dev->ifindex; + /* set uid in tx skb to identify CF echo frames */ + can_set_skb_uid(skb); + cf = (struct canfd_frame *)skb->data; skb_put_zero(skb, so->ll.mtu); @@ -830,12 +909,15 @@ static void isotp_send_cframe(struct isotp_sock *so) skb->dev = dev; can_skb_set_owner(skb, sk); - /* cfecho should have been zero'ed by init/isotp_rcv_echo() */ - if (so->cfecho) - pr_notice_once("can-isotp: cfecho is %08X != 0\n", so->cfecho); + /* zero'ed by init/isotp_rcv_echo(); reached lock-free via + * isotp_txfr_timer_handler() too, so use READ_ONCE()/WRITE_ONCE() + */ + old_cfecho = READ_ONCE(so->cfecho); + if (old_cfecho) + pr_notice_once("can-isotp: cfecho is %08X != 0\n", old_cfecho); /* set consecutive frame echo tag */ - so->cfecho = *(u32 *)cf->data; + WRITE_ONCE(so->cfecho, skb->hash); /* send frame with local echo enabled */ can_send_ret = can_send(skb, 1); @@ -887,7 +969,6 @@ static void isotp_rcv_echo(struct sk_buff *skb, void *data) { struct sock *sk = (struct sock *)data; struct isotp_sock *so = isotp_sk(sk); - struct canfd_frame *cf = (struct canfd_frame *)skb->data; /* only handle my own local echo CF/SF skb's (no FF!) */ if (skb->sk != sk) @@ -899,32 +980,35 @@ static void isotp_rcv_echo(struct sk_buff *skb, void *data) spin_lock(&so->rx_lock); /* so->cfecho may since belong to a new transfer; recheck under lock */ - if (so->cfecho != *(u32 *)cf->data) + if (READ_ONCE(so->cfecho) != skb->hash) goto out_unlock; /* cancel local echo timeout */ hrtimer_cancel(&so->echotimer); /* local echo skb with consecutive frame has been consumed */ - so->cfecho = 0; + WRITE_ONCE(so->cfecho, 0); /* claiming a transfer also takes so->rx_lock, so a plain recheck * is enough: so->tx.state can't have flipped to ISOTP_SENDING for * a new claim while we're still in here */ - if (so->tx.state != ISOTP_SENDING) + if (READ_ONCE(so->tx.state) != ISOTP_SENDING) goto out_unlock; if (so->tx.idx >= so->tx.len) { /* we are done */ - so->tx.state = ISOTP_IDLE; + + isotp_set_tx_result(so, so->tx_gen, 0); + /* set to IDLE after publishing tx_result */ + smp_store_release(&so->tx.state, ISOTP_IDLE); wake_up_interruptible(&so->wait); goto out_unlock; } if (so->txfc.bs && so->tx.bs >= so->txfc.bs) { /* stop and wait for FC with timeout */ - so->tx.state = ISOTP_WAIT_FC; + WRITE_ONCE(so->tx.state, ISOTP_WAIT_FC); hrtimer_start(&so->txtimer, ktime_set(ISOTP_FC_TIMEOUT, 0), HRTIMER_MODE_REL_SOFT); goto out_unlock; @@ -946,16 +1030,20 @@ out_unlock: spin_unlock(&so->rx_lock); } -/* shared by so->txtimer's and so->echotimer's callbacks. Both timers get - * cancelled under so->rx_lock elsewhere, so this must stay lock-free to - * avoid deadlocking with that; uses so->tx_gen instead to avoid tainting - * a new transfer with an error from the one that just timed out. +/* isotp_tx_timeout: we did not get any flow control or echo frame in time + * + * Shared by so->txtimer's and so->echotimer's callbacks. Both timers get + * cancelled under so->rx_lock elsewhere, so this must stay lock-free. + * + * tx.state is acquired before tx_gen. Common sequence in isotp_tx_gen_done(). + * cmpxchg() only orders itself, not the two preceding loads. */ static enum hrtimer_restart isotp_tx_timeout(struct isotp_sock *so) { struct sock *sk = &so->sk; + /* read tx.state first for the common sequence */ + u32 old_state = smp_load_acquire(&so->tx.state); u32 gen = READ_ONCE(so->tx_gen); - u32 old_state = READ_ONCE(so->tx.state); /* don't handle timeouts in IDLE or SHUTDOWN state */ if (old_state == ISOTP_IDLE || old_state == ISOTP_SHUTDOWN) @@ -965,14 +1053,14 @@ static enum hrtimer_restart isotp_tx_timeout(struct isotp_sock *so) if (cmpxchg(&so->tx.state, old_state, ISOTP_IDLE) != old_state) return HRTIMER_NORESTART; - /* we did not get any flow control or echo frame in time */ + /* detected timeout: report 'communication error on send' */ - if (READ_ONCE(so->tx_gen) == gen) { - /* report 'communication error on send' */ - sk->sk_err = ECOMM; - if (!sock_flag(sk, SOCK_DEAD)) - sk_error_report(sk); - } + /* a stale read of this slot by a waiter still falls back to ECOMM */ + isotp_set_tx_result(so, gen, ECOMM); + + sk->sk_err = ECOMM; + if (!sock_flag(sk, SOCK_DEAD)) + sk_error_report(sk); wake_up_interruptible(&so->wait); @@ -1007,7 +1095,7 @@ static enum hrtimer_restart isotp_txfr_timer_handler(struct hrtimer *hrtimer) HRTIMER_MODE_REL_SOFT); /* cfecho should be consumed by isotp_rcv_echo() here */ - if (so->tx.state == ISOTP_SENDING && !so->cfecho) + if (READ_ONCE(so->tx.state) == ISOTP_SENDING && !READ_ONCE(so->cfecho)) isotp_send_cframe(so); return HRTIMER_NORESTART; @@ -1026,10 +1114,12 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) s64 hrtimer_sec = ISOTP_ECHO_TIMEOUT; struct hrtimer *tx_hrt = &so->echotimer; u32 new_state = ISOTP_SENDING; + u32 my_gen; + u32 old_cfecho; int off; int err; - if (!so->bound || so->tx.state == ISOTP_SHUTDOWN) + if (!so->bound || READ_ONCE(so->tx.state) == ISOTP_SHUTDOWN) return -EADDRNOTAVAIL; /* claim the socket under so->rx_lock: this serializes the claim @@ -1046,29 +1136,33 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) if (msg->msg_flags & MSG_DONTWAIT) return -EAGAIN; - if (so->tx.state == ISOTP_SHUTDOWN) + if (READ_ONCE(so->tx.state) == ISOTP_SHUTDOWN) return -EADDRNOTAVAIL; /* wait for complete transmission of current pdu */ err = wait_event_interruptible(so->wait, - so->tx.state == ISOTP_IDLE); + READ_ONCE(so->tx.state) == ISOTP_IDLE || + READ_ONCE(so->tx.state) == ISOTP_SHUTDOWN); if (err) return err; } - /* new transfer: bump so->tx_gen and drain the old one's timers, - * still under the so->rx_lock we just claimed the socket with - */ - WRITE_ONCE(so->tx.state, ISOTP_SENDING); - WRITE_ONCE(so->tx_gen, READ_ONCE(so->tx_gen) + 1); + /* txfrtimer's callback re-arms echotimer lock-free: drain it first */ + hrtimer_cancel(&so->txfrtimer); hrtimer_cancel(&so->txtimer); hrtimer_cancel(&so->echotimer); - hrtimer_cancel(&so->txfrtimer); - so->cfecho = 0; + + /* new transfer: increment so->tx_gen and set tx.state after barrier */ + my_gen = isotp_inc_tx_gen(READ_ONCE(so->tx_gen)); + isotp_set_tx_result(so, my_gen, ECOMM); /* prevent stale slot matching */ + WRITE_ONCE(so->tx_gen, my_gen); + smp_wmb(); /* see smp_load_acquire() in isotp_tx_[timeout|gen_done] */ + WRITE_ONCE(so->tx.state, ISOTP_SENDING); + WRITE_ONCE(so->cfecho, 0); spin_unlock_bh(&so->rx_lock); /* so->bound is only checked once above - a wakeup may have - * unbound/rebound the socket meanwhile, so re-validate it + * unbound/rebound the socket meanwhile => recheck */ if (!so->bound) { err = -EADDRNOTAVAIL; @@ -1127,6 +1221,9 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) csx->can_iif = dev->ifindex; + /* set uid in tx skb to identify CF echo frames */ + can_set_skb_uid(skb); + so->tx.len = size; so->tx.idx = 0; @@ -1134,8 +1231,9 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) skb_put_zero(skb, so->ll.mtu); /* cfecho should have been zero'ed by init / former isotp_rcv_echo() */ - if (so->cfecho) - pr_notice_once("can-isotp: uninit cfecho %08X\n", so->cfecho); + old_cfecho = READ_ONCE(so->cfecho); + if (old_cfecho) + pr_notice_once("can-isotp: uninit cfecho %08X\n", old_cfecho); /* check for single frame transmission depending on TX_DL */ if (size <= so->tx.ll_dl - SF_PCI_SZ4 - ae - off) { @@ -1163,7 +1261,7 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) cf->data[ae] |= size; /* set CF echo tag for isotp_rcv_echo() (SF-mode) */ - so->cfecho = *(u32 *)cf->data; + WRITE_ONCE(so->cfecho, skb->hash); } else { /* send first frame */ @@ -1180,7 +1278,7 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) so->txfc.bs = 0; /* set CF echo tag for isotp_rcv_echo() (CF-mode) */ - so->cfecho = *(u32 *)cf->data; + WRITE_ONCE(so->cfecho, skb->hash); } else { /* standard flow control check */ new_state = ISOTP_WAIT_FIRST_FC; @@ -1190,12 +1288,12 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) tx_hrt = &so->txtimer; /* no CF echo tag for isotp_rcv_echo() (FF-mode) */ - so->cfecho = 0; + WRITE_ONCE(so->cfecho, 0); } } spin_lock_bh(&so->rx_lock); - if (so->tx.state == ISOTP_SHUTDOWN) { + if (READ_ONCE(so->tx.state) == ISOTP_SHUTDOWN) { /* isotp_release() has since taken over and already drained * our timers - don't send into a socket that's going away */ @@ -1206,7 +1304,7 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) return -EADDRNOTAVAIL; } /* WAIT_FIRST_FC for standard FF, else stays ISOTP_SENDING */ - so->tx.state = new_state; + WRITE_ONCE(so->tx.state, new_state); hrtimer_start(tx_hrt, ktime_set(hrtimer_sec, 0), HRTIMER_MODE_REL_SOFT); spin_unlock_bh(&so->rx_lock); @@ -1223,20 +1321,49 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) __func__, ERR_PTR(err)); spin_lock_bh(&so->rx_lock); + + /* new transfer already claimed by a concurrent completion, + * timeout or sendmsg() while we were stuck in can_send()? + */ + if (READ_ONCE(so->tx_gen) != my_gen) { + /* don't touch timers and state of the new transfer */ + spin_unlock_bh(&so->rx_lock); + return err; + } + /* no transmission -> no timeout monitoring */ hrtimer_cancel(tx_hrt); goto err_out_drop_locked; } if (wait_tx_done) { - /* wait for complete transmission of current pdu */ - err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE); + /* wake up for: + * - concurrent sendmsg() claiming a new transfer + * - complete transmission of current PDU + * - shutdown state change in isotp_release() + * isotp_tx_gen_done() uses common tx.state/tx_gen read sequence + */ + err = wait_event_interruptible(so->wait, + isotp_tx_gen_done(so, my_gen)); if (err) goto err_event_drop; - err = sock_error(sk); - if (err) - return err; + /* still our claim, but isotp_release() force-shut it down */ + if (smp_load_acquire(&so->tx.state) == ISOTP_SHUTDOWN && + READ_ONCE(so->tx_gen) == my_gen) { + err = -EADDRNOTAVAIL; + goto err_event_drop; + } + + /* own completion, or tx_gen moved on - either way this is + * what isotp_get_tx_result() recorded for my_gen + */ + err = isotp_get_tx_result(so, my_gen); + + /* drain to avoid stale error for a later poll()/SO_ERROR */ + sock_error(sk); + + return err ? err : size; } return size; @@ -1246,15 +1373,26 @@ err_out_drop: spin_lock_bh(&so->rx_lock); goto err_out_drop_locked; err_event_drop: - /* interrupted waiting on our own transfer - drain its timers */ + /* interrupted or shut down while waiting on our own transfer */ spin_lock_bh(&so->rx_lock); + + /* new transfer already started by concurrent sendmsg()? */ + if (READ_ONCE(so->tx_gen) != my_gen) { + /* don't touch timers and states of the new transfer */ + spin_unlock_bh(&so->rx_lock); + return err; + } + hrtimer_cancel(&so->txfrtimer); hrtimer_cancel(&so->txtimer); hrtimer_cancel(&so->echotimer); err_out_drop_locked: /* release the claim; so->rx_lock still held from above */ - so->cfecho = 0; - so->tx.state = ISOTP_IDLE; + WRITE_ONCE(so->cfecho, 0); + + /* only claim to IDLE if isotp_release() has not taken over */ + if (READ_ONCE(so->tx.state) != ISOTP_SHUTDOWN) + WRITE_ONCE(so->tx.state, ISOTP_IDLE); spin_unlock_bh(&so->rx_lock); wake_up_interruptible(&so->wait); @@ -1320,8 +1458,9 @@ static int isotp_release(struct socket *sock) /* best-effort: wait for a running pdu to finish, but don't block on * it forever - give up after the first signal */ - while (so->tx.state != ISOTP_IDLE && - wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE) == 0) + while (READ_ONCE(so->tx.state) != ISOTP_IDLE && + wait_event_interruptible(so->wait, + READ_ONCE(so->tx.state) == ISOTP_IDLE) == 0) ; /* claim the socket under so->rx_lock like sendmsg() does, so its @@ -1329,9 +1468,12 @@ static int isotp_release(struct socket *sock) * unconditionally, even when a signal cut the wait above short */ spin_lock_bh(&so->rx_lock); - so->tx.state = ISOTP_SHUTDOWN; + WRITE_ONCE(so->tx.state, ISOTP_SHUTDOWN); spin_unlock_bh(&so->rx_lock); - so->rx.state = ISOTP_IDLE; + WRITE_ONCE(so->rx.state, ISOTP_IDLE); + + /* forced SHUTDOWN may have skipped IDLE (gave up on a signal) */ + wake_up_interruptible(&so->wait); spin_lock(&isotp_notifier_lock); while (isotp_busy_notifier == so) { @@ -1447,7 +1589,8 @@ static int isotp_bind(struct socket *sock, struct sockaddr_unsized *uaddr, int l * with so->bound in the same lock_sock() section above, so there is * no window in which a concurrent isotp_notify() could be missed. */ - if (so->tx.state != ISOTP_IDLE || so->rx.state != ISOTP_IDLE) { + if (READ_ONCE(so->tx.state) != ISOTP_IDLE || + READ_ONCE(so->rx.state) != ISOTP_IDLE) { err = -EAGAIN; goto out; } @@ -1481,7 +1624,7 @@ static int isotp_bind(struct socket *sock, struct sockaddr_unsized *uaddr, int l isotp_rcv, sk, "isotp", sk); /* no consecutive frame echo skb in flight */ - so->cfecho = 0; + WRITE_ONCE(so->cfecho, 0); /* register for echo skb's */ can_rx_register(net, dev, tx_id, SINGLE_MASK(tx_id), @@ -1847,7 +1990,7 @@ static __poll_t isotp_poll(struct file *file, struct socket *sock, poll_table *w poll_wait(file, &so->wait, wait); /* Check for false positives due to TX state */ - if ((mask & EPOLLWRNORM) && (so->tx.state != ISOTP_IDLE)) + if ((mask & EPOLLWRNORM) && (READ_ONCE(so->tx.state) != ISOTP_IDLE)) mask &= ~(EPOLLOUT | EPOLLWRNORM); return mask; -- cgit v1.2.3 From c870f7e2890b9f78ac84515a9809cc5c183c975e Mon Sep 17 00:00:00 2001 From: Chenguang Zhao Date: Thu, 23 Jul 2026 10:18:19 +0800 Subject: net: sxgbe: free TX rings on RX allocation failure When RX descriptor ring allocation fails, init_dma_desc_rings() only frees the partially allocated RX rings and returns. The TX rings that were allocated earlier in the same function are leaked. Rearrange error labels to clean up TX rings upon RX failures. Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver") Signed-off-by: Chenguang Zhao Reviewed-by: Vadim Fedorenko Signed-off-by: David S. Miller --- drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index 5051ada43d2f..9b48a587d5c2 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -597,14 +597,13 @@ static int init_dma_desc_rings(struct net_device *netd) return 0; -txalloc_err: - while (queue_num--) - free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize); - return ret; - rxalloc_err: while (queue_num--) free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize); + queue_num = SXGBE_TX_QUEUES; +txalloc_err: + while (queue_num--) + free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize); return ret; } -- cgit v1.2.3 From 51b093a7ba27476e1f639455f005e8d2e75390e4 Mon Sep 17 00:00:00 2001 From: Chenguang Zhao Date: Thu, 23 Jul 2026 10:18:20 +0800 Subject: net: sxgbe: check descriptor ring allocation failures sxgbe_open() ignores the return value of init_dma_desc_rings() and continues to program DMA with invalid ring addresses when allocation fails. Check the return value and disconnect the PHY on failure. Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver") Signed-off-by: Chenguang Zhao Reviewed-by: Vadim Fedorenko Signed-off-by: David S. Miller --- drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index 9b48a587d5c2..70cf3619555f 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -1078,7 +1078,9 @@ static int sxgbe_open(struct net_device *dev) priv->dma_buf_sz = SXGBE_ALIGN(DMA_BUFFER_SIZE); priv->tx_tc = TC_DEFAULT; priv->rx_tc = TC_DEFAULT; - init_dma_desc_rings(dev); + ret = init_dma_desc_rings(dev); + if (ret) + goto init_phy_error; /* DMA initialization and SW reset */ ret = sxgbe_init_dma_engine(priv); @@ -1187,6 +1189,7 @@ static int sxgbe_open(struct net_device *dev) init_error: free_dma_desc_resources(priv); +init_phy_error: if (dev->phydev) phy_disconnect(dev->phydev); phy_error: -- cgit v1.2.3 From ef09a13c5afac41a3c4b5f22b8572820d9e7518c Mon Sep 17 00:00:00 2001 From: Minhong He Date: Wed, 29 Jul 2026 16:56:56 +0800 Subject: can: isotp: check register_netdevice_notifier() error in module init Register the netdevice notifier before can_proto_register() and check the return value. If protocol registration fails, unregister the notifier before returning the error. Align isotp_module_init() with the reordering already done for raw.c (commit c28b3bffe49e ("can: raw: process optimization in raw_init()")) and bcm.c (commit edd1a7e42f1d ("can: bcm: registration process optimization in bcm_module_init()")). Fixes: 8d0caedb7596 ("can: bcm/raw/isotp: use per module netdevice notifier") Signed-off-by: Minhong He Link: https://patch.msgid.link/20260729085656.134523-1-heminhong@kylinos.cn Signed-off-by: Marc Kleine-Budde --- net/can/isotp.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/can/isotp.c b/net/can/isotp.c index 1f11c66b343c..155530aedce2 100644 --- a/net/can/isotp.c +++ b/net/can/isotp.c @@ -2050,13 +2050,18 @@ static __init int isotp_module_init(void) pr_info("can: isotp protocol (max_pdu_size %d)\n", max_pdu_size); + err = register_netdevice_notifier(&canisotp_notifier); + if (err) + return err; + err = can_proto_register(&isotp_can_proto); - if (err < 0) + if (err < 0) { pr_err("can: registration of isotp protocol failed %pe\n", ERR_PTR(err)); - else - register_netdevice_notifier(&canisotp_notifier); + unregister_netdevice_notifier(&canisotp_notifier); + return err; + } - return err; + return 0; } static __exit void isotp_module_exit(void) -- cgit v1.2.3 From a6873910f983096746d1a2e0af94f36b8003e839 Mon Sep 17 00:00:00 2001 From: Avi Weiss Date: Thu, 23 Jul 2026 12:59:34 +0300 Subject: can: ctucanfd: unmap BAR0 using base address BAR0 is mapped into bar0_base, while cra_addr points to an offset within that mapping and is used for other purposes. Pass bar0_base to pci_iounmap(), instead of cra_addr, on the probe error path so the address returned by pci_iomap() is used for unmapping. Fixes: 792a5b678e81 ("can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support.") Signed-off-by: Avi Weiss Acked-by: Pavel Pisa Link: https://patch.msgid.link/20260723095934.181042-1-thnkslprpt@gmail.com Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ctucanfd/ctucanfd_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/ctucanfd/ctucanfd_pci.c b/drivers/net/can/ctucanfd/ctucanfd_pci.c index 625788fa8976..f845951c5d51 100644 --- a/drivers/net/can/ctucanfd/ctucanfd_pci.c +++ b/drivers/net/can/ctucanfd/ctucanfd_pci.c @@ -194,7 +194,7 @@ err_free_board: pci_set_drvdata(pdev, NULL); kfree(bdata); err_pci_iounmap_bar0: - pci_iounmap(pdev, cra_addr); + pci_iounmap(pdev, bar0_base); err_pci_iounmap_bar1: pci_iounmap(pdev, addr); err_release_regions: -- cgit v1.2.3 From 4e735cbe3affe88001428fdd9cae8e685ce92f21 Mon Sep 17 00:00:00 2001 From: Avi Weiss Date: Thu, 23 Jul 2026 18:55:43 +0300 Subject: can: ctucanfd: mark error-active controller status valid In the CAN_STATE_ERROR_ACTIVE case, cf->data[1] is set to CAN_ERR_CRTL_ACTIVE, but cf->can_id is not set with CAN_ERR_CRTL in that path. Set CAN_ERR_CRTL so consumers know the controller-status information in cf->data[1] is valid. Fixes: 9bd24927e3ee ("can: ctucanfd: handle skb allocation failure") Signed-off-by: Avi Weiss Link: https://patch.msgid.link/20260723155543.318414-1-thnkslprpt@gmail.com Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ctucanfd/ctucanfd_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/ctucanfd/ctucanfd_base.c b/drivers/net/can/ctucanfd/ctucanfd_base.c index 0ea1ff28dfce..8f8b1c097ec6 100644 --- a/drivers/net/can/ctucanfd/ctucanfd_base.c +++ b/drivers/net/can/ctucanfd/ctucanfd_base.c @@ -869,7 +869,7 @@ static void ctucan_err_interrupt(struct net_device *ndev, u32 isr) break; case CAN_STATE_ERROR_ACTIVE: if (skb) { - cf->can_id |= CAN_ERR_CNT; + cf->can_id |= CAN_ERR_CRTL | CAN_ERR_CNT; cf->data[1] = CAN_ERR_CRTL_ACTIVE; cf->data[6] = bec.txerr; cf->data[7] = bec.rxerr; -- cgit v1.2.3 From e74bae899529f49c0f375307983d12e8ecad7d4b Mon Sep 17 00:00:00 2001 From: Avi Weiss Date: Thu, 23 Jul 2026 10:44:03 +0300 Subject: can: ctucanfd: handle bus error interrupts Include REG_INT_STAT_BEI in the top-level error interrupt condition. BEI is enabled when CAN_CTRLMODE_BERR_REPORTING is requested and ctucan_err_interrupt() already handles it. Without checking and clearing BEI in the top-level handler, bus error interrupts are not handled or acknowledged. Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.") Signed-off-by: Avi Weiss Acked-by: Pavel Pisa Link: https://patch.msgid.link/20260723074403.131575-1-thnkslprpt@gmail.com Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ctucanfd/ctucanfd_base.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/ctucanfd/ctucanfd_base.c b/drivers/net/can/ctucanfd/ctucanfd_base.c index 8f8b1c097ec6..10ebcc13ea65 100644 --- a/drivers/net/can/ctucanfd/ctucanfd_base.c +++ b/drivers/net/can/ctucanfd/ctucanfd_base.c @@ -1136,8 +1136,12 @@ static irqreturn_t ctucan_interrupt(int irq, void *dev_id) /* Error interrupts */ if (FIELD_GET(REG_INT_STAT_EWLI, isr) || FIELD_GET(REG_INT_STAT_FCSI, isr) || - FIELD_GET(REG_INT_STAT_ALI, isr)) { - icr = isr & (REG_INT_STAT_EWLI | REG_INT_STAT_FCSI | REG_INT_STAT_ALI); + FIELD_GET(REG_INT_STAT_ALI, isr) || + FIELD_GET(REG_INT_STAT_BEI, isr)) { + icr = isr & (REG_INT_STAT_EWLI | + REG_INT_STAT_FCSI | + REG_INT_STAT_ALI | + REG_INT_STAT_BEI); ctucan_netdev_dbg(ndev, "some ERR interrupt: clearing 0x%08x\n", icr); ctucan_write32(priv, CTUCANFD_INT_STAT, icr); -- cgit v1.2.3 From c31a435933f18be0f874302161333e9f16e200a0 Mon Sep 17 00:00:00 2001 From: Avi Weiss Date: Wed, 22 Jul 2026 22:27:26 +0300 Subject: can: ctucanfd: use self-test mode for PRESUME_ACK Use self-test mode for CAN_CTRLMODE_PRESUME_ACK so transmitted frames can complete without receiving an ACK. ACK forbidden mode prevents the controller from acknowledging received frames and does not implement the presume-ack behavior. Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.") Signed-off-by: Avi Weiss Acked-by: Pavel Pisa Link: https://patch.msgid.link/20260722192726.230729-1-thnkslprpt@gmail.com Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ctucanfd/ctucanfd_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/ctucanfd/ctucanfd_base.c b/drivers/net/can/ctucanfd/ctucanfd_base.c index 10ebcc13ea65..07d4aa43c700 100644 --- a/drivers/net/can/ctucanfd/ctucanfd_base.c +++ b/drivers/net/can/ctucanfd/ctucanfd_base.c @@ -340,8 +340,8 @@ static void ctucan_set_mode(struct ctucan_priv *priv, const struct can_ctrlmode (mode_reg & ~REG_MODE_FDE); mode_reg = (mode->flags & CAN_CTRLMODE_PRESUME_ACK) ? - (mode_reg | REG_MODE_ACF) : - (mode_reg & ~REG_MODE_ACF); + (mode_reg | REG_MODE_STM) : + (mode_reg & ~REG_MODE_STM); mode_reg = (mode->flags & CAN_CTRLMODE_FD_NON_ISO) ? (mode_reg | REG_MODE_NISOFD) : -- cgit v1.2.3 From d937bdb244a751fe5967052ea2d64a7b2c476cc0 Mon Sep 17 00:00:00 2001 From: Pengpeng Hou Date: Sat, 4 Jul 2026 23:19:57 +0800 Subject: can: ctucanfd: add missing MODULE_DEVICE_TABLE() The driver has a match table for the pci bus wired into its driver structure, but the table is not exported with MODULE_DEVICE_TABLE(). Add the missing MODULE_DEVICE_TABLE() entry so module alias information is generated for automatic module loading. This is a source-level fix. It does not claim dynamic hardware reproduction; the evidence is the driver-owned match table, its use by the driver registration structure, and the missing module alias publication. Signed-off-by: Pengpeng Hou Acked-by: Pavel Pisa Link: https://patch.msgid.link/20260704151957.48194-1-pengpeng@iscas.ac.cn Fixes: 792a5b678e81 ("can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support.") Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ctucanfd/ctucanfd_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/ctucanfd/ctucanfd_pci.c b/drivers/net/can/ctucanfd/ctucanfd_pci.c index f845951c5d51..4b6db28f7b67 100644 --- a/drivers/net/can/ctucanfd/ctucanfd_pci.c +++ b/drivers/net/can/ctucanfd/ctucanfd_pci.c @@ -266,6 +266,7 @@ static const struct pci_device_id ctucan_pci_tbl[] = { CTUCAN_WITH_CTUCAN_ID)}, {}, }; +MODULE_DEVICE_TABLE(pci, ctucan_pci_tbl); static struct pci_driver ctucan_pci_driver = { .name = KBUILD_MODNAME, -- cgit v1.2.3 From 39132f166ca8ce00ae60d8a9068e06a60943cc4b Mon Sep 17 00:00:00 2001 From: James Gao Date: Wed, 20 May 2026 13:40:03 +0800 Subject: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). Fixes: d8a199355f8f ("can: usb: PEAK-System Technik PCAN-USB Pro specific part") Signed-off-by: James Gao Reviewed-by: Vincent Mailhol Link: https://patch.msgid.link/TYWPR01MB8559DBAAAA6A7F410400329CF0012@TYWPR01MB8559.jpnprd01.prod.outlook.com Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index aefcded8e12a..b6be8c19e537 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -534,12 +534,18 @@ static int pcan_usb_pro_handle_canmsg(struct pcan_usb_pro_interface *usb_if, struct pcan_usb_pro_rxmsg *rx) { const unsigned int ctrl_idx = (rx->len >> 4) & 0x0f; - struct peak_usb_device *dev = usb_if->dev[ctrl_idx]; - struct net_device *netdev = dev->netdev; + struct peak_usb_device *dev; + struct net_device *netdev; struct can_frame *can_frame; struct sk_buff *skb; struct skb_shared_hwtstamps *hwts; + if (ctrl_idx >= ARRAY_SIZE(usb_if->dev)) + return -EINVAL; + + dev = usb_if->dev[ctrl_idx]; + netdev = dev->netdev; + skb = alloc_can_skb(netdev, &can_frame); if (!skb) return -ENOMEM; @@ -573,14 +579,20 @@ static int pcan_usb_pro_handle_error(struct pcan_usb_pro_interface *usb_if, { const u16 raw_status = le16_to_cpu(er->status); const unsigned int ctrl_idx = (er->channel >> 4) & 0x0f; - struct peak_usb_device *dev = usb_if->dev[ctrl_idx]; - struct net_device *netdev = dev->netdev; + struct peak_usb_device *dev; + struct net_device *netdev; struct can_frame *can_frame; enum can_state new_state = CAN_STATE_ERROR_ACTIVE; u8 err_mask = 0; struct sk_buff *skb; struct skb_shared_hwtstamps *hwts; + if (ctrl_idx >= ARRAY_SIZE(usb_if->dev)) + return -EINVAL; + + dev = usb_if->dev[ctrl_idx]; + netdev = dev->netdev; + /* nothing should be sent while in BUS_OFF state */ if (dev->can.state == CAN_STATE_BUS_OFF) return 0; -- cgit v1.2.3 From 9b3d5a6d952c38bbcf07f903cbeadefdb56b9bc9 Mon Sep 17 00:00:00 2001 From: Maoyi Xie Date: Wed, 17 Jun 2026 02:15:31 +0800 Subject: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0 Free of addr ffff8881069ccb80 by task trigger.sh/285 Call Trace: kfree+0x113/0x3c0 usb_free_urb.part.0+0x91/0xb0 Drop the redundant kfree(buf); usb_free_urb() already releases the transfer buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free issue with interrupt buffer allocation"). Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Closes: https://lore.kernel.org/linux-can/178159320216.2154888.16953451793788581739@maoyixie.com/T/#u Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Reviewed-by: Vincent Mailhol Link: https://patch.msgid.link/178163373110.2507866.216458825145756798@maoyixie.com Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index c7933d1acc99..55aad01cd8ca 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -470,7 +470,6 @@ static int peak_usb_start(struct peak_usb_device *dev) netif_device_detach(dev->netdev); usb_unanchor_urb(urb); - kfree(buf); usb_free_urb(urb); break; } -- cgit v1.2.3 From 93fcab2c6968446316bbb49548848df604d6346f Mon Sep 17 00:00:00 2001 From: Pengpeng Hou Date: Mon, 6 Jul 2026 17:28:36 +0800 Subject: can: peak_usb: validate uCAN receive record lengths pcan_usb_fd_decode_buf() walks uCAN records packed in one USB receive buffer. Require each record to contain the fixed header for its type, and verify CAN payload bytes before copying them into the skb. Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260706092836.79754-1-pengpeng@iscas.ac.cn Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 40 +++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index ef9fd693e9bd..0d46f4ce5dca 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -566,6 +566,13 @@ static int pcan_usb_fd_decode_canmsg(struct pcan_usb_fd_if *usb_if, dev->can.ctrlmode); } + if (!(rx_msg_flags & PUCAN_MSG_RTR) && + le16_to_cpu(rx_msg->size) - offsetof(struct pucan_rx_msg, d) < + cfd->len) { + kfree_skb(skb); + return -EBADMSG; + } + cfd->can_id = le32_to_cpu(rm->can_id); if (rx_msg_flags & PUCAN_MSG_EXT_ID) @@ -714,6 +721,24 @@ static void pcan_usb_fd_decode_ts(struct pcan_usb_fd_if *usb_if, peak_usb_set_ts_now(&usb_if->time_ref, le32_to_cpu(ts->ts_low)); } +static size_t pcan_usb_fd_rx_msg_min_size(u16 rx_msg_type) +{ + switch (rx_msg_type) { + case PUCAN_MSG_CAN_RX: + return offsetof(struct pucan_rx_msg, d); + case PCAN_UFD_MSG_CALIBRATION: + return sizeof(struct pcan_ufd_ts_msg); + case PUCAN_MSG_ERROR: + return sizeof(struct pucan_error_msg); + case PUCAN_MSG_STATUS: + return sizeof(struct pucan_status_msg); + case PCAN_UFD_MSG_OVERRUN: + return sizeof(struct pcan_ufd_ovr_msg); + default: + return sizeof(struct pucan_msg); + } +} + /* callback for bulk IN urb */ static int pcan_usb_fd_decode_buf(struct peak_usb_device *dev, struct urb *urb) { @@ -728,6 +753,12 @@ static int pcan_usb_fd_decode_buf(struct peak_usb_device *dev, struct urb *urb) msg_end = urb->transfer_buffer + urb->actual_length; for (; msg_ptr < msg_end;) { u16 rx_msg_type, rx_msg_size; + size_t rx_msg_min_size; + + if (msg_end - msg_ptr < sizeof(*rx_msg)) { + err = -EBADMSG; + break; + } rx_msg = (struct pucan_msg *)msg_ptr; if (!rx_msg->size) { @@ -739,13 +770,20 @@ static int pcan_usb_fd_decode_buf(struct peak_usb_device *dev, struct urb *urb) rx_msg_type = le16_to_cpu(rx_msg->type); /* check if the record goes out of current packet */ - if (msg_ptr + rx_msg_size > msg_end) { + if (rx_msg_size > msg_end - msg_ptr) { netdev_err(netdev, "got frag rec: should inc usb rx buf sze\n"); err = -EBADMSG; break; } + rx_msg_min_size = pcan_usb_fd_rx_msg_min_size(rx_msg_type); + if (rx_msg_size < rx_msg_min_size) { + netdev_err(netdev, "got short rec\n"); + err = -EBADMSG; + break; + } + switch (rx_msg_type) { case PUCAN_MSG_CAN_RX: err = pcan_usb_fd_decode_canmsg(usb_if, rx_msg); -- cgit v1.2.3 From 941eaf9a6d3b33dea49f2c0a1da7546a03b6ff71 Mon Sep 17 00:00:00 2001 From: Abdun Nihaal Date: Wed, 22 Jul 2026 16:09:03 +0530 Subject: can: kvaser_usb: kvaser_usb_hydra_get_busparams(): fix memory leak in kvaser_usb_hydra_get_busparams() The memory allocated for cmd is not freed after the call to kvaser_usb_send_cmd() in both the normal and error paths. Fix that by adding a kfree() immediately after the call. Fixes: 39d3df6b0ea8 ("can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Link: https://patch.msgid.link/20260722103906.108571-1-nihaal@cse.iitm.ac.in Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c index e09d663e362f..efbb7bed34c9 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c @@ -1626,6 +1626,7 @@ static int kvaser_usb_hydra_get_busparams(struct kvaser_usb_net_priv *priv, reinit_completion(&priv->get_busparams_comp); err = kvaser_usb_send_cmd(dev, cmd, cmd_len); + kfree(cmd); if (err) return err; -- cgit v1.2.3 From 0293dd153f9dbc1ddf5dacdccc76b363bce4a8ee Mon Sep 17 00:00:00 2001 From: Pengpeng Hou Date: Wed, 22 Jul 2026 12:22:21 +0800 Subject: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260722042221.44066-1-pengpeng@iscas.ac.cn Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index df737cfc5ea0..a876c7819b81 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -691,13 +691,22 @@ static int kvaser_usb_leaf_wait_cmd(const struct kvaser_usb *dev, u8 id, continue; } - if (pos + tmp->len > actual_len) { + if (tmp->len < CMD_HEADER_LEN || + tmp->len > actual_len - pos) { dev_err_ratelimited(&dev->intf->dev, "Format error\n"); break; } if (tmp->id == id) { + if (tmp->len > sizeof(*cmd)) { + dev_err_ratelimited(&dev->intf->dev, + "Received command %u too large (%u)\n", + tmp->id, tmp->len); + err = -EIO; + goto end; + } + memcpy(cmd, tmp, tmp->len); goto end; } @@ -1737,7 +1746,7 @@ static void kvaser_usb_leaf_read_bulk_callback(struct kvaser_usb *dev, continue; } - if (pos + cmd->len > len) { + if (cmd->len < CMD_HEADER_LEN || cmd->len > len - pos) { dev_err_ratelimited(&dev->intf->dev, "Format error\n"); break; } -- cgit v1.2.3 From bef9004c5b91debfceaea2841855a4ebe81ff2b3 Mon Sep 17 00:00:00 2001 From: Tu Nguyen Date: Thu, 25 Jun 2026 14:51:51 +0100 Subject: can: rcar_canfd: change the initializing flow for clocks and resets Testing CANFD on RZ/G3E shows that many registers do not reset to their initial values with the current flow of deasserting resets first and then enabling clocks. Based on the HW manual, clocks should be supplied first and the resets deasserted afterward. section 7.4.3 Procedure for Activating Modules: RZ/G2L section 4.4.9.3 Procedure for Starting up Units: RZ/G3E So, update the order of the initializing flow for resets and clocks to match the hardware manual, resetting all CANFD registers to their initial values. Also update rcar_canfd_global_deinit() to assert resets before disabling clocks, so the teardown path mirrors the new init ordering. Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family") Signed-off-by: Tu Nguyen Signed-off-by: Biju Das Tested-by: Claudiu Beznea Reviewed-by: Geert Uytterhoeven Reviewed-by: Vincent Mailhol Link: https://patch.msgid.link/20260625135216.130450-1-biju.das.jz@bp.renesas.com Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/rcar/rcar_canfd.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index eaf8cac78038..fcc37b73ed43 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -2003,20 +2003,12 @@ static int rcar_canfd_global_init(struct rcar_canfd_global *gpriv) u32 ch, sts; int err; - err = reset_control_reset(gpriv->rstc1); - if (err) - return err; - - err = reset_control_reset(gpriv->rstc2); - if (err) - goto fail_reset1; - /* Enable peripheral clock for register access */ err = clk_prepare_enable(gpriv->clkp); if (err) { dev_err(dev, "failed to enable peripheral clock: %pe\n", ERR_PTR(err)); - goto fail_reset2; + return err; } /* Enable RAM clock */ @@ -2027,10 +2019,18 @@ static int rcar_canfd_global_init(struct rcar_canfd_global *gpriv) goto fail_clk; } + err = reset_control_reset(gpriv->rstc1); + if (err) + goto fail_ram_clk; + + err = reset_control_reset(gpriv->rstc2); + if (err) + goto fail_reset1; + err = rcar_canfd_reset_controller(gpriv); if (err) { dev_err(dev, "reset controller failed: %pe\n", ERR_PTR(err)); - goto fail_ram_clk; + goto fail_reset2; } /* Controller in Global reset & Channel reset mode */ @@ -2068,14 +2068,14 @@ static int rcar_canfd_global_init(struct rcar_canfd_global *gpriv) fail_mode: rcar_canfd_disable_global_interrupts(gpriv); -fail_ram_clk: - clk_disable_unprepare(gpriv->clk_ram); -fail_clk: - clk_disable_unprepare(gpriv->clkp); fail_reset2: reset_control_assert(gpriv->rstc2); fail_reset1: reset_control_assert(gpriv->rstc1); +fail_ram_clk: + clk_disable_unprepare(gpriv->clk_ram); +fail_clk: + clk_disable_unprepare(gpriv->clkp); return err; } @@ -2090,10 +2090,10 @@ static void rcar_canfd_global_deinit(struct rcar_canfd_global *gpriv, bool full) rcar_canfd_set_bit(gpriv->base, RCANFD_GCTR, RCANFD_GCTR_GSLPR); } - clk_disable_unprepare(gpriv->clk_ram); - clk_disable_unprepare(gpriv->clkp); reset_control_assert(gpriv->rstc2); reset_control_assert(gpriv->rstc1); + clk_disable_unprepare(gpriv->clk_ram); + clk_disable_unprepare(gpriv->clkp); } static int rcar_canfd_probe(struct platform_device *pdev) -- cgit v1.2.3 From 856d6cb04e5407523566b075841dcd6423757d1c Mon Sep 17 00:00:00 2001 From: Pengpeng Hou Date: Wed, 22 Jul 2026 12:43:47 +0800 Subject: can: softing: fw_parse(): validate firmware record spans fw_parse() reads a fixed record header, a firmware-provided payload, and a trailing checksum without knowing the end of the firmware blob. A truncated record can therefore make those reads exceed the blob. The same record also supplies addresses and lengths for writes into DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its bounds check, while the application loader does not bound the staging copy at all. Pass the firmware end to the parser and validate the full source record. Use a signed wide offset for generic DPRAM records and validate the application staging span against the mapped DPRAM before copying. Fixes: 03fd3cf5a179 ("can: add driver for Softing card") Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260722044347.2708-1-pengpeng@iscas.ac.cn Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/softing/softing_fw.c | 46 +++++++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 14 deletions(-) diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c index 721df91cdbfb..282570daf3ef 100644 --- a/drivers/net/can/softing/softing_fw.c +++ b/drivers/net/can/softing/softing_fw.c @@ -91,12 +91,12 @@ int softing_bootloader_command(struct softing *card, int16_t cmd, return ret; } -static int fw_parse(const uint8_t **pmem, uint16_t *ptype, uint32_t *paddr, - uint16_t *plen, const uint8_t **pdat) +static int fw_parse(const u8 **pmem, const u8 *limit, u16 *ptype, + u32 *paddr, u16 *plen, const u8 **pdat) { uint16_t checksum[2]; - const uint8_t *mem; - const uint8_t *end; + const u8 *mem; + const u8 *record_end; /* * firmware records are a binary, unaligned stream composed of: @@ -114,14 +114,21 @@ static int fw_parse(const uint8_t **pmem, uint16_t *ptype, uint32_t *paddr, * endianness & alignment. */ mem = *pmem; + /* A record needs an 8-byte prefix and a 2-byte checksum. */ + if (mem > limit || limit - mem < 10) + return -EINVAL; + *ptype = le16_to_cpup((void *)&mem[0]); *paddr = le32_to_cpup((void *)&mem[2]); *plen = le16_to_cpup((void *)&mem[6]); + if (*plen > limit - mem - 10) + return -EINVAL; + *pdat = &mem[8]; /* verify checksum */ - end = &mem[8 + *plen]; - checksum[0] = le16_to_cpup((void *)end); - for (checksum[1] = 0; mem < end; ++mem) + record_end = &mem[8 + *plen]; + checksum[0] = le16_to_cpup((void *)record_end); + for (checksum[1] = 0; mem < record_end; ++mem) checksum[1] += *mem; if (checksum[0] != checksum[1]) return -EINVAL; @@ -139,6 +146,7 @@ int softing_load_fw(const char *file, struct softing *card, uint16_t type, len; uint32_t addr; uint8_t *buf = NULL, *new_buf; + s64 dpram_offset; int buflen = 0; int8_t type_end = 0; @@ -153,7 +161,7 @@ int softing_load_fw(const char *file, struct softing *card, mem = fw->data; end = &mem[fw->size]; /* look for header record */ - ret = fw_parse(&mem, &type, &addr, &len, &dat); + ret = fw_parse(&mem, end, &type, &addr, &len, &dat); if (ret < 0) goto failed; if (type != 0xffff) @@ -164,7 +172,7 @@ int softing_load_fw(const char *file, struct softing *card, } /* ok, we had a header */ while (mem < end) { - ret = fw_parse(&mem, &type, &addr, &len, &dat); + ret = fw_parse(&mem, end, &type, &addr, &len, &dat); if (ret < 0) goto failed; if (type == 3) { @@ -179,9 +187,13 @@ int softing_load_fw(const char *file, struct softing *card, goto failed; } - if ((addr + len + offset) > size) + dpram_offset = (s64)addr + offset; + if (dpram_offset < 0 || dpram_offset > size || + len > size - dpram_offset) { + ret = -EINVAL; goto failed; - memcpy_toio(&dpram[addr + offset], dat, len); + } + memcpy_toio(&dpram[dpram_offset], dat, len); /* be sure to flush caches from IO space */ mb(); if (len > buflen) { @@ -195,7 +207,7 @@ int softing_load_fw(const char *file, struct softing *card, buf = new_buf; } /* verify record data */ - memcpy_fromio(buf, &dpram[addr + offset], len); + memcpy_fromio(buf, &dpram[dpram_offset], len); if (memcmp(buf, dat, len)) { /* is not ok */ dev_alert(&card->pdev->dev, "DPRAM readback failed\n"); @@ -237,7 +249,7 @@ int softing_load_app_fw(const char *file, struct softing *card) mem = fw->data; end = &mem[fw->size]; /* look for header record */ - ret = fw_parse(&mem, &type, &addr, &len, &dat); + ret = fw_parse(&mem, end, &type, &addr, &len, &dat); if (ret) goto failed; ret = -EINVAL; @@ -253,7 +265,7 @@ int softing_load_app_fw(const char *file, struct softing *card) } /* ok, we had a header */ while (mem < end) { - ret = fw_parse(&mem, &type, &addr, &len, &dat); + ret = fw_parse(&mem, end, &type, &addr, &len, &dat); if (ret) goto failed; @@ -279,6 +291,12 @@ int softing_load_app_fw(const char *file, struct softing *card) /* work in 16bit (target) */ sum &= 0xffff; + if (card->pdat->app.offs > card->dpram_size || + len > card->dpram_size - card->pdat->app.offs) { + ret = -EINVAL; + goto failed; + } + memcpy_toio(&card->dpram[card->pdat->app.offs], dat, len); iowrite32(card->pdat->app.offs + card->pdat->app.addr, &card->dpram[DPRAM_COMMAND + 2]); -- cgit v1.2.3 From 26504844613fb44c7cab1c5f6fcff77861709baa Mon Sep 17 00:00:00 2001 From: Lucas Martins Alves Date: Tue, 14 Jul 2026 16:48:57 +0000 Subject: can: c_can: c_can_chip_config(): keep controller in init mode until bittiming is configured c_can_chip_config() was programming C_CAN_CTRL_REG without CONTROL_INIT, which may allow the controller to become active before c_can_set_bittiming() finishes. That creates a short timing window where the peripheral can interact with the bus using a different/default bitrate, potentially generating bus errors and corrupting traffic. Set CONTROL_INIT together with the control-mode writes in c_can_chip_config() (normal, loopback and listen-only paths), so the controller stays halted until bit timing is fully programmed. This prevents transient bus disturbance during startup when the configured bitrate differs from the active bus bitrate. Signed-off-by: Lucas Martins Alves Link: https://patch.msgid.link/20260714164839.771123-1-lucas.alves@lumal21.com.br Fixes: 881ff67ad450 ("can: c_can: Added support for Bosch C_CAN controller") Cc: stable@kernel.org [mkl: remove space before close parenthesis] Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/c_can/c_can_main.c b/drivers/net/can/c_can/c_can_main.c index 3702cac7fbf0..b3b321d9ce68 100644 --- a/drivers/net/can/c_can/c_can_main.c +++ b/drivers/net/can/c_can/c_can_main.c @@ -597,20 +597,20 @@ static int c_can_chip_config(struct net_device *dev) return err; /* enable automatic retransmission */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR | CONTROL_INIT); if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) && (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) { /* loopback + silent mode : useful for hot self-test */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST | CONTROL_INIT); priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT); } else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { /* loopback mode : useful for self-test function */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST | CONTROL_INIT); priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK); } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) { /* silent mode : bus-monitoring mode */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST | CONTROL_INIT); priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT); } -- cgit v1.2.3 From 68c5724ecd159992f76edb7b57dc508a44c8b7da Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 9 Jul 2026 09:54:26 +0200 Subject: can: gs_usb: gs_usb_receive_bulk_callback(): resubmit URB on skb allocation failure If the allocation of the SKB in gs_usb_receive_bulk_callback() fails, the driver returns from the callback without resubmitting the URB in order to receive further USB in URBs. This results in a silent performance degradation which, if it occurs repeatedly, results in starvation of USB in traffic. Instead of returning immediately, try to resend the URB. If this also fails, this is logged as an info message. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Fixes: 26949ac935e3 ("can: gs_usb: add CAN-FD support") Link: https://patch.msgid.link/20260709-gs_usb-resubmit-urb-v1-1-4dd40030cc84@pengutronix.de Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/gs_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index ec9a7cbbbc69..82508a865095 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -674,7 +674,7 @@ static void gs_usb_receive_bulk_callback(struct urb *urb) if (hf->flags & GS_CAN_FLAG_FD) { skb = alloc_canfd_skb(netdev, &cfd); if (!skb) - return; + goto resubmit_urb; cfd->can_id = le32_to_cpu(hf->can_id); cfd->len = data_length; @@ -687,7 +687,7 @@ static void gs_usb_receive_bulk_callback(struct urb *urb) } else { skb = alloc_can_skb(netdev, &cf); if (!skb) - return; + goto resubmit_urb; cf->can_id = le32_to_cpu(hf->can_id); can_frame_set_cc_len(cf, hf->can_dlc, dev->can.ctrlmode); -- cgit v1.2.3 From 7a0cf2b2497c757c3cb1286eddf2986abb0d387b Mon Sep 17 00:00:00 2001 From: Guangshuo Li Date: Mon, 6 Jul 2026 09:46:01 +0800 Subject: can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure es58x_read_bulk_callback() resubmits the RX URB after processing a received packet. If the resubmit succeeds, the URB remains anchored and will be handled by the normal RX path or by teardown. However, if usb_submit_urb() fails, the callback unanchors the URB and then returns directly. This skips the existing free_urb path, so the coherent transfer buffer allocated with usb_alloc_coherent() is not released. Reuse the existing free_urb path after a resubmit failure so that the RX coherent buffer is freed before leaving the callback. Fixes: 5eaad4f76826 ("can: usb: etas_es58x: correctly anchor the urb in the read bulk callback") Signed-off-by: Guangshuo Li Reviewed-by: Vincent Mailhol Link: https://patch.msgid.link/20260706014601.415445-1-lgs201920130244@gmail.com Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/etas_es58x/es58x_core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.c b/drivers/net/can/usb/etas_es58x/es58x_core.c index b259f6109808..e1724ae79c5a 100644 --- a/drivers/net/can/usb/etas_es58x/es58x_core.c +++ b/drivers/net/can/usb/etas_es58x/es58x_core.c @@ -1476,7 +1476,6 @@ static void es58x_read_bulk_callback(struct urb *urb) dev_err_ratelimited(dev, "Failed resubmitting read bulk urb: %pe\n", ERR_PTR(ret)); - return; free_urb: usb_free_coherent(urb->dev, urb->transfer_buffer_length, -- cgit v1.2.3 From 02925f51377f2a42a6724f00549167499c9302e5 Mon Sep 17 00:00:00 2001 From: Pengpeng Hou Date: Mon, 6 Jul 2026 17:27:52 +0800 Subject: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers. Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260706092752.79600-1-pengpeng@iscas.ac.cn Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/ems_usb.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 9b25dda7c183..24cf8f651f8f 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -409,6 +409,40 @@ static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg) netif_rx(skb); } +static bool ems_usb_rx_msg_len_valid(struct ems_cpc_msg *msg) +{ + size_t len = msg->length; + size_t can_len; + + switch (msg->type) { + case CPC_MSG_TYPE_CAN_STATE: + return len >= sizeof(msg->msg.can_state); + + case CPC_MSG_TYPE_CAN_FRAME: + case CPC_MSG_TYPE_EXT_CAN_FRAME: + case CPC_MSG_TYPE_RTR_FRAME: + case CPC_MSG_TYPE_EXT_RTR_FRAME: + if (len < CPC_CAN_MSG_MIN_SIZE) + return false; + + if (msg->type == CPC_MSG_TYPE_RTR_FRAME || + msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME) + return true; + + can_len = can_cc_dlc2len(msg->msg.can_msg.length & 0xf); + return len >= CPC_CAN_MSG_MIN_SIZE + can_len; + + case CPC_MSG_TYPE_CAN_FRAME_ERROR: + return len >= sizeof(msg->msg.error); + + case CPC_MSG_TYPE_OVERRUN: + return len >= sizeof(msg->msg.overrun); + + default: + return true; + } +} + /* * callback for bulk IN urb */ @@ -451,6 +485,15 @@ static void ems_usb_read_bulk_callback(struct urb *urb) } msg = (struct ems_cpc_msg *)&ibuf[start]; + if (msg->length > + urb->actual_length - start - CPC_MSG_HEADER_LEN) { + netdev_err(netdev, "format error\n"); + break; + } + if (!ems_usb_rx_msg_len_valid(msg)) { + netdev_err(netdev, "format error\n"); + break; + } switch (msg->type) { case CPC_MSG_TYPE_CAN_STATE: -- cgit v1.2.3 From 26cb8ebbfaf713c82e142d08828d4d765057633b Mon Sep 17 00:00:00 2001 From: Chao Shi Date: Mon, 27 Jul 2026 16:12:57 -0400 Subject: block: stop the timeout timer when releasing a never added disk disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme. Fixes: 6f8191fdf41d ("block: simplify disk shutdown") Acked-by: Weidong Zhu Signed-off-by: Chao Shi Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20260727201257.211635-1-coshi036@gmail.com Signed-off-by: Jens Axboe --- block/genhd.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/block/genhd.c b/block/genhd.c index df2c3c69b467..e8ce0cabf392 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1281,14 +1281,18 @@ static void disk_release(struct device *dev) /* * To undo the all initialization from blk_mq_init_allocated_queue in * case of a probe failure where add_disk is never called we have to - * call blk_mq_exit_queue here. We can't do this for the more common - * teardown case (yet) as the tagset can be gone by the time the disk - * is released once it was added. + * call blk_mq_exit_queue here, after stopping the timer and work items + * that I/O issued before add_disk may have left pending. We can't do + * this for the more common teardown case (yet) as the tagset can be + * gone by the time the disk is released once it was added. */ if (queue_is_mq(disk->queue) && test_bit(GD_OWNS_QUEUE, &disk->state) && - !test_bit(GD_ADDED, &disk->state)) + !test_bit(GD_ADDED, &disk->state)) { + blk_sync_queue(disk->queue); + blk_mq_cancel_work_sync(disk->queue); blk_mq_exit_queue(disk->queue); + } blkcg_exit_disk(disk); -- cgit v1.2.3 From e40e20ac089e32f1d910636155dc82e61e61dcf3 Mon Sep 17 00:00:00 2001 From: Alexander Kaplan Date: Wed, 10 Jun 2026 21:38:25 +0200 Subject: drm/dp: Read the PCON max FRL bandwidth only for HDMI DFPs The PCON max FRL bandwidth field lives in byte 2 of the DFP Detailed Capability Info (DPCD 0x82 for the first DFP). The DP standard defines the meaning of descriptor bytes 1-3 strictly per DFP type, and for a DisplayPort type DFP all of them are reserved, with "read all 0s" semantics (DP v2.0, section 2.12.3, Table 2-183). The FRL bandwidth field is an HDMI DFP extension added by the VESA DP-to-HDMI PCON specification. drm_dp_get_pcon_max_frl_bw() however parses the byte without checking the DFP type, the branch presence or DETAILED_CAP_INFO_AVAILABLE. Without the latter the port descriptors are one byte wide and port_cap[2] is not even the right register. All neighbouring helpers parsing the same descriptor are scoped by the DFP type already, see for instance drm_dp_downstream_max_bpc() reading the same byte and returning 0 for a DP type DFP. amdgpu's DC parses the field only for HDMI(/DP++) detailed types as well. This is not theoretical. A Synaptics VMM7100 based USB-C to HDMI adapter with a macOS targeted firmware advertises a DisplayPort type DFP with the type byte replicated across the whole descriptor (08 08 08 08). i915 decodes that as "PCON limited to 18 Gbps FRL" and prunes every mode above ~750 MHz dotclock, including all the 4k@100/120 modes the sink EDID offers, while macOS drives 4k@120 through the same adapter just fine via DP DSC (and amdgpu's type-scoped parser would ignore the bogus field as well). Only parse the field for an HDMI DFP behind a DPCD 1.1+ branch device that reports detailed cap info, matching the type-scoped field layout of the spec and the rest of the helpers. Fixes: ce32a6239de6 ("drm/dp_helper: Add Helpers for FRL Link Training support for DP-HDMI2.1 PCON") Cc: Ankit Nautiyal Cc: Uma Shankar (v2) Cc: Jani Nikula Cc: Maarten Lankhorst Cc: dri-devel@lists.freedesktop.org Cc: # v5.12+ Signed-off-by: Alexander Kaplan Reviewed-by: Ankit Nautiyal Signed-off-by: Ankit Nautiyal Link: https://patch.msgid.link/20260610193825.2933-1-alexander.kaplan@sms-medipool.de --- drivers/gpu/drm/display/drm_dp_helper.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c index 9c31e14cc413..e623ccb4c1d8 100644 --- a/drivers/gpu/drm/display/drm_dp_helper.c +++ b/drivers/gpu/drm/display/drm_dp_helper.c @@ -3686,6 +3686,18 @@ int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], int bw; u8 buf; + if (!drm_dp_is_branch(dpcd)) + return 0; + + if (dpcd[DP_DPCD_REV] < 0x11) + return 0; + + if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DETAILED_CAP_INFO_AVAILABLE) == 0) + return 0; + + if ((port_cap[0] & DP_DS_PORT_TYPE_MASK) != DP_DS_PORT_TYPE_HDMI) + return 0; + buf = port_cap[2]; bw = buf & DP_PCON_MAX_FRL_BW; -- cgit v1.2.3 From 5732bd17feb9ddf843591c4d038eb6de1f8daf4c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sat, 9 May 2026 22:50:25 +1000 Subject: MAINTAINERS: Demote myself to reviewer I haven't been active enough lately to warrant an M: maintainer entry, demote me to reviewer. Signed-off-by: Michael Ellerman Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/87y0hspx0u.fsf@mpe.ellerman.id.au --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 716acfc3d7c1..07088d5ac788 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14887,7 +14887,7 @@ X: drivers/macintosh/via-macii.c LINUX FOR POWERPC (32-BIT AND 64-BIT) M: Madhavan Srinivasan -M: Michael Ellerman +R: Michael Ellerman R: Nicholas Piggin R: Christophe Leroy (CS GROUP) L: linuxppc-dev@lists.ozlabs.org -- cgit v1.2.3 From 3e191eddbdcb8bf7beb1e9b58209073bd5450719 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Tue, 28 Jul 2026 17:31:45 +0200 Subject: drm/mediatek: mtk_dsi: Enable HS clock only at pre-enable Commit 76255024cadb ("drm/mediatek: mtk_dsi: enable hs clock during pre-enable") rightfully moves the HS clock enablement to before atomic_enable(), but it's moving it to mtk_dsi_poweron(), which is not only called in the .atomic_pre_enable() callback for the DRM bridge, but also in the MediaTek DRM's .ddp_start() callback, which happens way before the bridge ones. The HS clock enablement should be done at just the right time, otherwise some bridge chips (or some Display Driver ICs) may not work correctly: this is seen at least with a Parade DSI to eDP bridge (PS8640) on the MT8173 Elm Chromebook. This resolves a regression that was seen on the aforementioned machine, which was happening only after a suspend-resume cycle. Cc: # 7.1.x Fixes: 76255024cadb ("drm/mediatek: mtk_dsi: enable hs clock during pre-enable") Signed-off-by: AngeloGioacchino Del Regno Tested-by: Adam Thiede Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260728153145.578404-1-angelogioacchino.delregno@collabora.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_dsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index eb325e68aa59..49dfc0f825cb 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -743,8 +743,6 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) mtk_dsi_set_vm_cmd(dsi); mtk_dsi_config_vdo_timing(dsi); mtk_dsi_set_interrupt_enable(dsi); - mtk_dsi_lane_ready(dsi); - mtk_dsi_clk_hs_mode(dsi, 1); return 0; err_disable_engine_clk: @@ -858,6 +856,9 @@ static void mtk_dsi_bridge_atomic_pre_enable(struct drm_bridge *bridge, ret = mtk_dsi_poweron(dsi); if (ret < 0) drm_err(drm, "failed to power on dsi\n"); + + mtk_dsi_lane_ready(dsi); + mtk_dsi_clk_hs_mode(dsi, 1); } static void mtk_dsi_bridge_atomic_post_disable(struct drm_bridge *bridge, -- cgit v1.2.3 From 533e3469a57996905cdb95f178e7efe38c21aeb2 Mon Sep 17 00:00:00 2001 From: Myeonghun Pak Date: Wed, 22 Jul 2026 00:22:42 +0900 Subject: drm/mediatek: ovl_adaptor: balance component registrations The OVL adaptor registers both an aggregate driver for its child devices and a component for the main DRM aggregate. Probe currently ignores an error from registering the child aggregate and leaves that aggregate registered if registering the DRM component fails. The remove callback also leaves the DRM component registered. These imbalances can leave component framework entries referring to a device whose probe failed or whose driver has been detached. The aggregate unbind callback also fails to undo component_bind_all(), leaving its child components marked as bound when the aggregate is removed. Check the aggregate registration result, unwind it when the component registration fails, and unregister the component before the aggregate on remove. Keep runtime PM enabled until both framework registrations have been removed, and unbind all child components from the aggregate unbind callback. Fixes: 453c3364632a ("drm/mediatek: Add ovl_adaptor support for MT8195") Cc: stable@vger.kernel.org # 6.4+ Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260721152242.47138-1-mhun512@gmail.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c index c0af3e3b51d5..6a259872b0a9 100644 --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c @@ -625,6 +625,7 @@ static void mtk_disp_ovl_adaptor_master_unbind(struct device *dev) struct mtk_disp_ovl_adaptor *priv = dev_get_drvdata(dev); priv->children_bound = false; + component_unbind_all(dev, priv->mmsys_dev); } static const struct component_master_ops mtk_disp_ovl_adaptor_master_ops = { @@ -651,12 +652,15 @@ static int mtk_disp_ovl_adaptor_probe(struct platform_device *pdev) priv->mmsys_dev = pdev->dev.platform_data; - component_master_add_with_match(dev, &mtk_disp_ovl_adaptor_master_ops, match); + ret = component_master_add_with_match(dev, &mtk_disp_ovl_adaptor_master_ops, match); + if (ret) + return dev_err_probe(dev, ret, "Failed to add component master\n"); pm_runtime_enable(dev); ret = component_add(dev, &mtk_disp_ovl_adaptor_comp_ops); if (ret != 0) { + component_master_del(dev, &mtk_disp_ovl_adaptor_master_ops); pm_runtime_disable(dev); return dev_err_probe(dev, ret, "Failed to add component\n"); } @@ -666,6 +670,7 @@ static int mtk_disp_ovl_adaptor_probe(struct platform_device *pdev) static void mtk_disp_ovl_adaptor_remove(struct platform_device *pdev) { + component_del(&pdev->dev, &mtk_disp_ovl_adaptor_comp_ops); component_master_del(&pdev->dev, &mtk_disp_ovl_adaptor_master_ops); pm_runtime_disable(&pdev->dev); } -- cgit v1.2.3 From 8891e39e89042e285fd82fdde325d1311ec750a1 Mon Sep 17 00:00:00 2001 From: Alexander Kaplan Date: Sat, 18 Jul 2026 12:52:07 +0200 Subject: drm/i915/dp: Ignore the sink's DSC max FRL rate without a PCON DSC encoder MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit intel_dp_hdmi_sink_max_frl() limits the sink's max FRL rate by its DSC max FRL rate whenever the sink supports DSC 1.2. However, the DSC max FRL rate (HF-VSDB DSC_Max_FRL_Rate) only applies to compressed video transport, which requires a DSC 1.2 encoder in the PCON (configured via intel_dp_pcon_dsc_configure()). Without such an encoder the HDMI link always carries uncompressed video, for which the regular Max_FRL_Rate is the correct limit. Applying the DSC limit unconditionally trains the FRL link at a lower rate than both the PCON and the sink support. E.g. an LG OLED G4 (Max_FRL_Rate 48 Gbps, DSC_Max_FRL_Rate 24 Gbps) behind a Synaptics VMM7100 PCON (PCON max FRL bw 48 Gbps, no DSC encoder): Sink max rate from EDID = 24 Gbps FRL trained with : 24 Gbps while Windows/macOS train the same hardware at 40/48 Gbps. The too low FRL rate needlessly constrains the formats available to the sink. Only apply the sink's DSC max FRL rate if the PCON has a DSC 1.2 encoder, matching the gate in intel_dp_pcon_dsc_configure(). PCONs with a DSC encoder keep the current conservative behavior, since the link is trained once and compressed transport may be used for any subsequent mode. With this the setup above trains at 48 Gbps. Tested on PTL (xe) with the above PCON/sink combo. Fixes: 10fec80b48c5 ("drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding") Cc: Ankit Nautiyal Cc: Ville Syrjälä Reviewed-by: Ankit Nautiyal Signed-off-by: Alexander Kaplan Signed-off-by: Ankit Nautiyal Link: https://patch.msgid.link/20260718105207.5565-3-alexander.kaplan@sms-medipool.de (cherry picked from commit 71b57dd92f94569dca4bdf883fbd8ca5d4ed4bae) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_dp.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 7ff5712f8b19..5733d2e7ac7f 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -4242,7 +4242,14 @@ static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) rate_per_lane = info->hdmi.max_frl_rate_per_lane; max_frl_rate = max_lanes * rate_per_lane; - if (info->hdmi.dsc_cap.v_1p2) { + /* + * The sink's DSC max FRL rate only applies to compressed video + * transport, which requires a DSC 1.2 encoder in the PCON. Without + * one the HDMI link always carries uncompressed video, for which + * the regular max FRL rate is the limit. + */ + if (drm_dp_pcon_enc_is_dsc_1_2(intel_dp->pcon_dsc_dpcd) && + info->hdmi.dsc_cap.v_1p2) { max_dsc_lanes = info->hdmi.dsc_cap.max_lanes; dsc_rate_per_lane = info->hdmi.dsc_cap.max_frl_rate_per_lane; if (max_dsc_lanes && dsc_rate_per_lane) -- cgit v1.2.3 From c256bd486855d8948aff29e0c97d50712da4e85e Mon Sep 17 00:00:00 2001 From: Brajesh Gupta Date: Fri, 24 Jul 2026 20:12:12 +0530 Subject: drm/imagination: Update the trace point pvr_job_submit_fw() Trace point pvr_job_submit_fw() is used to trace job submission to the FW. Currently it is recorded when a command is written to the Client circular buffer. Move trace recording after writing command to the Kernel circular buffer to better represent command submission to the FW. Fixes: c1079aebb4de ("drm/imagination: Add support for trace points") Signed-off-by: Brajesh Gupta Reviewed-by: Alessio Belle Link: https://patch.msgid.link/20260724-b4-tracepoint-fix-v3-1-8f8e5e8179d3@imgtec.com Signed-off-by: Alessio Belle --- drivers/gpu/drm/imagination/pvr_queue.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/imagination/pvr_queue.c b/drivers/gpu/drm/imagination/pvr_queue.c index 941c017399fc..d13726401d92 100644 --- a/drivers/gpu/drm/imagination/pvr_queue.c +++ b/drivers/gpu/drm/imagination/pvr_queue.c @@ -726,8 +726,6 @@ static void pvr_queue_submit_job_to_cccb(struct pvr_job *job) cmd->partial_render_geom_frag_fence.value = job->done_fence->seqno - 1; } - trace_pvr_job_submit_fw(job); - /* Submit job to FW */ pvr_cccb_write_command_with_header(cccb, job->fw_ccb_cmd_type, job->cmd_len, job->cmd, job->id, job->id); @@ -802,6 +800,9 @@ static struct dma_fence *pvr_queue_run_job(struct drm_sched_job *sched_job) job->hwrt, frag_job->fw_ccb_cmd_type == ROGUE_FWIF_CCB_CMD_TYPE_FRAG_PR); + + trace_pvr_job_submit_fw(geom_job); + trace_pvr_job_submit_fw(frag_job); } else { struct pvr_queue *queue = container_of(job->base.sched, struct pvr_queue, scheduler); @@ -809,6 +810,8 @@ static struct dma_fence *pvr_queue_run_job(struct drm_sched_job *sched_job) pvr_cccb_send_kccb_kick(pvr_dev, &queue->cccb, pvr_context_get_fw_addr(job->ctx) + queue->ctx_offset, job->hwrt); + + trace_pvr_job_submit_fw(job); } return dma_fence_get(job->done_fence); -- cgit v1.2.3 From 537601771adb97a603503bc7837d39eaa44023e1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 Jul 2026 15:58:14 -0300 Subject: ASoC: dt-bindings: realtek,rt5640: Make interrupts optional The RT5640 GPIO1/IRQ pin can be configured either as GPIO1 or as the codec interrupt output. Some boards, such as the Firefly-RK3399, do not connect the codec interrupt output. This causes the following binding validation warning: 'interrupts' is a required property Make the interrupts property optional to support such hardware configurations. Signed-off-by: Fabio Estevam Link: https://patch.msgid.link/20260727185814.2599488-1-festevam@gmail.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/realtek,rt5640.yaml | 1 - 1 file changed, 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5640.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5640.yaml index 2eb631950963..922fe161f4d7 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt5640.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt5640.yaml @@ -135,7 +135,6 @@ properties: required: - compatible - reg - - interrupts unevaluatedProperties: false -- cgit v1.2.3 From d94f82d57e7a86def6946f22b34eb53f96628f8a Mon Sep 17 00:00:00 2001 From: Himal Prasad Ghimiray Date: Tue, 28 Jul 2026 11:29:17 +0530 Subject: drm/xe/pt: check no-DMA huge-pte cases before DMA segment test On a non-range clear, curs.size is never set, so the segment test (next - va_curs_start > curs->size) returns false for every level > 0 before the clear_pt short-circuit is reached. The clear then descends to level 0 instead of forming a huge zero-leaf, wasting page tables and risking -ENOMEM on unbind. Move the null-VMA, purged-BO and clear_pt short-circuits above the curs->size test. The bind path always sets curs.size, so it is unaffected. v2 - Also set curs.size on the clear path so the cursor stays meaningful during the walk. clear_pt is only reached with range == NULL, so assert that invariant. (Matthew Brost) Cc: Matthew Brost Fixes: 5b658b7e89c3 ("drm/xe: Clear scratch page on vm_bind") Reported-by: Sashiko Reviewed-by: Matthew Brost Link: https://patch.msgid.link/20260728055916.593707-2-himal.prasad.ghimiray@intel.com Signed-off-by: Himal Prasad Ghimiray (cherry picked from commit 04eeeb45cb61b8a3e9d785003457e550c920ba49) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_pt.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_pt.c b/drivers/gpu/drm/xe/xe_pt.c index 39c9c8f0ea2d..d0a1e6c2b55f 100644 --- a/drivers/gpu/drm/xe/xe_pt.c +++ b/drivers/gpu/drm/xe/xe_pt.c @@ -443,10 +443,6 @@ static bool xe_pt_hugepte_possible(u64 addr, u64 next, unsigned int level, if (!xe_pt_covers(addr, next, level, &xe_walk->base)) return false; - /* Does the DMA segment cover the whole pte? */ - if (next - xe_walk->va_curs_start > xe_walk->curs->size) - return false; - /* null VMA's and purged BO's do not have dma addresses */ if (xe_vma_is_null(xe_walk->vma) || (bo && xe_bo_is_purged(bo))) return true; @@ -455,6 +451,10 @@ static bool xe_pt_hugepte_possible(u64 addr, u64 next, unsigned int level, if (xe_walk->clear_pt) return true; + /* Does the DMA segment cover the whole pte? */ + if (next - xe_walk->va_curs_start > xe_walk->curs->size) + return false; + /* Is the DMA address huge PTE size aligned? */ size = next - addr; dma = addr - xe_walk->va_curs_start + xe_res_dma(xe_walk->curs); @@ -775,8 +775,11 @@ xe_pt_stage_bind(struct xe_tile *tile, struct xe_vma *vma, } xe_walk.needs_64K = (vm->flags & XE_VM_FLAG_64K); - if (clear_pt) + if (clear_pt) { + xe_assert(xe, !range); + curs.size = xe_vma_size(vma); goto walk_pt; + } if (vma->gpuva.flags & XE_VMA_ATOMIC_PTE_BIT) { xe_walk.default_vram_pte = xe_atomic_for_vram(vm, vma) ? XE_USM_PPGTT_PTE_AE : 0; -- cgit v1.2.3 From 8cf2f40ceb85047ad8a84dffae3bebc9fed18216 Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Wed, 29 Jul 2026 08:27:33 +0900 Subject: fprobe: Fix module reference count leak on error in register_fprobe() In register_fprobe(), get_ips_from_filter() resolves target function addresses and increments module reference counts via try_module_get() for symbols in kernel modules. If get_ips_from_filter() fails on the second pass and returns an error, register_fprobe() returned directly without releasing module references acquired up to that point. Fix this by ensuring the cleanup loop executing module_put() runs even when get_ips_from_filter() returns a negative error. Link: https://lore.kernel.org/all/178528125360.101985.4144133640239273153.stgit@devnote2/ Fixes: d24fa977eec5 ("tracing: fprobe: Fix to lock module while registering fprobe") Assisted-by: Antigravity:gemini-3.6-flash Signed-off-by: Masami Hiramatsu (Google) --- kernel/trace/fprobe.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/trace/fprobe.c b/kernel/trace/fprobe.c index f215990b9061..f681015413b8 100644 --- a/kernel/trace/fprobe.c +++ b/kernel/trace/fprobe.c @@ -961,10 +961,8 @@ int register_fprobe(struct fprobe *fp, const char *filter, const char *notfilter return -ENOMEM; ret = get_ips_from_filter(filter, notfilter, addrs, mods, num); - if (ret < 0) - return ret; - - ret = register_fprobe_ips(fp, addrs, ret); + if (ret >= 0) + ret = register_fprobe_ips(fp, addrs, ret); for (int i = 0; i < num; i++) { if (mods[i]) -- cgit v1.2.3 From b921b8613790a3f9e78ab64017fa7149ef0b750c Mon Sep 17 00:00:00 2001 From: Osama Abdelkader Date: Mon, 20 Jul 2026 13:49:17 +0200 Subject: drm/panthor: validate firmware interface structure sizes iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual address points inside the shared section. The returned pointer is later used as a full firmware interface structure, so accepting an address near the end of the shared section can still lead to out-of-bounds accesses. Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges that do not fit entirely in the shared section. Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block") Cc: stable@vger.kernel.org Signed-off-by: Osama Abdelkader Reviewed-by: Steven Price Signed-off-by: Steven Price Link: https://patch.msgid.link/20260720114918.15973-1-osama.abdelkader@gmail.com --- drivers/gpu/drm/panthor/panthor_fw.c | 36 ++++++++++++++++++++++++------------ 1 file changed, 24 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/panthor/panthor_fw.c b/drivers/gpu/drm/panthor/panthor_fw.c index 0623d37ac617..e45933e333b5 100644 --- a/drivers/gpu/drm/panthor/panthor_fw.c +++ b/drivers/gpu/drm/panthor/panthor_fw.c @@ -864,18 +864,24 @@ out: * iface_fw_to_cpu_addr() - Turn an MCU address into a CPU address * @ptdev: Device. * @mcu_va: MCU address. + * @size: Size of the object pointed to by @mcu_va. * - * Return: NULL if the address is not part of the shared section, non-NULL otherwise. + * Return: NULL if the object is not part of the shared section, non-NULL otherwise. */ -static void *iface_fw_to_cpu_addr(struct panthor_device *ptdev, u32 mcu_va) +static void *iface_fw_to_cpu_addr(struct panthor_device *ptdev, u32 mcu_va, size_t size) { u64 shared_mem_start = panthor_kernel_bo_gpuva(ptdev->fw->shared_section->mem); - u64 shared_mem_end = shared_mem_start + - panthor_kernel_bo_size(ptdev->fw->shared_section->mem); - if (mcu_va < shared_mem_start || mcu_va >= shared_mem_end) + size_t shared_mem_size = panthor_kernel_bo_size(ptdev->fw->shared_section->mem); + u64 offset; + + if (mcu_va < shared_mem_start) + return NULL; + + offset = mcu_va - shared_mem_start; + if (offset > shared_mem_size || size > shared_mem_size - offset) return NULL; - return ptdev->fw->shared_section->mem->kmap + (mcu_va - shared_mem_start); + return ptdev->fw->shared_section->mem->kmap + offset; } static int panthor_init_cs_iface(struct panthor_device *ptdev, @@ -897,8 +903,10 @@ static int panthor_init_cs_iface(struct panthor_device *ptdev, spin_lock_init(&cs_iface->lock); cs_iface->control = ptdev->fw->shared_section->mem->kmap + iface_offset; - cs_iface->input = iface_fw_to_cpu_addr(ptdev, cs_iface->control->input_va); - cs_iface->output = iface_fw_to_cpu_addr(ptdev, cs_iface->control->output_va); + cs_iface->input = iface_fw_to_cpu_addr(ptdev, cs_iface->control->input_va, + sizeof(*cs_iface->input)); + cs_iface->output = iface_fw_to_cpu_addr(ptdev, cs_iface->control->output_va, + sizeof(*cs_iface->output)); if (!cs_iface->input || !cs_iface->output) { drm_err(&ptdev->base, "Invalid stream control interface input/output VA"); @@ -948,8 +956,10 @@ static int panthor_init_csg_iface(struct panthor_device *ptdev, spin_lock_init(&csg_iface->lock); csg_iface->control = ptdev->fw->shared_section->mem->kmap + iface_offset; - csg_iface->input = iface_fw_to_cpu_addr(ptdev, csg_iface->control->input_va); - csg_iface->output = iface_fw_to_cpu_addr(ptdev, csg_iface->control->output_va); + csg_iface->input = iface_fw_to_cpu_addr(ptdev, csg_iface->control->input_va, + sizeof(*csg_iface->input)); + csg_iface->output = iface_fw_to_cpu_addr(ptdev, csg_iface->control->output_va, + sizeof(*csg_iface->output)); if (csg_iface->control->stream_num < MIN_CS_PER_CSG || csg_iface->control->stream_num > MAX_CS_PER_CSG) @@ -1006,8 +1016,10 @@ static int panthor_fw_init_ifaces(struct panthor_device *ptdev) return -EINVAL; } - glb_iface->input = iface_fw_to_cpu_addr(ptdev, glb_iface->control->input_va); - glb_iface->output = iface_fw_to_cpu_addr(ptdev, glb_iface->control->output_va); + glb_iface->input = iface_fw_to_cpu_addr(ptdev, glb_iface->control->input_va, + sizeof(*glb_iface->input)); + glb_iface->output = iface_fw_to_cpu_addr(ptdev, glb_iface->control->output_va, + sizeof(*glb_iface->output)); if (!glb_iface->input || !glb_iface->output) { drm_err(&ptdev->base, "Invalid global control interface input/output VA"); return -EINVAL; -- cgit v1.2.3 From f27f6976ea269219c1259a7c2f8c6dfe782540a3 Mon Sep 17 00:00:00 2001 From: Hongyan Xu Date: Wed, 29 Jul 2026 18:01:16 +0800 Subject: hwmon: (npcm750-pwm-fan): stop fan timer on device detach When a fan tach channel is present, npcm7xx_pwm_fan_probe() starts fan_timer. The timer callback polls tach state and rearms the timer, but the driver has no remove callback or devm cleanup action to stop it. On device detach, the devm-managed driver data and I/O mappings can be released while the timer is still pending or running. Register a devm cleanup action before starting the timer and shut the timer down synchronously from that action. This issue was found by a static analysis tool. Fixes: f1fd4a4db777 ("hwmon: Add NPCM7xx PWM and Fan driver") Cc: stable@vger.kernel.org Signed-off-by: Hongyan Xu Link: https://lore.kernel.org/r/20260729100116.790-1-getshell@seu.edu.cn Signed-off-by: Guenter Roeck --- drivers/hwmon/npcm750-pwm-fan.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/hwmon/npcm750-pwm-fan.c b/drivers/hwmon/npcm750-pwm-fan.c index aea0b8659f5f..6ff2a6bc06c1 100644 --- a/drivers/hwmon/npcm750-pwm-fan.c +++ b/drivers/hwmon/npcm750-pwm-fan.c @@ -358,6 +358,11 @@ static void npcm7xx_fan_polling(struct timer_list *t) add_timer(&data->fan_timer); } +static void npcm7xx_fan_cleanup(void *timer) +{ + timer_shutdown_sync(timer); +} + static inline void npcm7xx_fan_compute(struct npcm7xx_pwm_fan_data *data, u8 fan, u8 cmp, u8 fan_id, u8 flag_int, u8 flag_mode, u8 flag_clear) @@ -1020,6 +1025,12 @@ static int npcm7xx_pwm_fan_probe(struct platform_device *pdev) msecs_to_jiffies(NPCM7XX_FAN_POLL_TIMER_200MS); timer_setup(&data->fan_timer, npcm7xx_fan_polling, 0); + ret = devm_add_action_or_reset(dev, + npcm7xx_fan_cleanup, + &data->fan_timer); + if (ret) + return ret; + add_timer(&data->fan_timer); break; } -- cgit v1.2.3 From 779e0eb18c774b81a462a6ee89cfbc9eb2d3cee5 Mon Sep 17 00:00:00 2001 From: Nam Cao Date: Wed, 29 Jul 2026 11:43:28 -0600 Subject: riscv: time: Add missing __iomem in get_cycles() and get_cycles_hi() __iomem is missing while calling readl_relaxed() in get_cycles() and get_cycles_hi() and sparse complains. Add __iomem to silence the sparse warnings. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202607160619.14G8GHp5-lkp@intel.com/ Signed-off-by: Nam Cao Link: https://patch.msgid.link/20260716053319.2178937-1-namcao@linutronix.de Signed-off-by: Paul Walmsley --- arch/riscv/include/asm/timex.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h index a06697846e69..d41acfb3959d 100644 --- a/arch/riscv/include/asm/timex.h +++ b/arch/riscv/include/asm/timex.h @@ -22,13 +22,13 @@ static inline cycles_t get_cycles(void) #else /* !CONFIG_64BIT */ static inline u32 get_cycles(void) { - return readl_relaxed(((u32 *)clint_time_val)); + return readl_relaxed(((u32 __iomem *)clint_time_val)); } #define get_cycles get_cycles static inline u32 get_cycles_hi(void) { - return readl_relaxed(((u32 *)clint_time_val) + 1); + return readl_relaxed(((u32 __iomem *)clint_time_val) + 1); } #define get_cycles_hi get_cycles_hi #endif /* CONFIG_64BIT */ -- cgit v1.2.3 From 9a22a1542ca03381dcbf000d7a264cbee61e7203 Mon Sep 17 00:00:00 2001 From: Yong-Xuan Wang Date: Wed, 29 Jul 2026 11:43:28 -0600 Subject: riscv/sifive: remove warning in errata The alternative patching of sifive vendor extensions also calls the sifive_errata_patch_func(), but the patch_id of the vendor extension (ext + RISCV_VENDOR_EXT_ALTERNATIVES_BASE) is always larger than ERRATA_SIFIVE_NUMBER. Remove this unnecessary warning. Signed-off-by: Yong-Xuan Wang Link: https://patch.msgid.link/20260503-sifive_errata-v1-1-6f12a81bc267@sifive.com [pjw@kernel.org: drop unnecessary braces] Signed-off-by: Paul Walmsley --- arch/riscv/errata/sifive/errata.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/riscv/errata/sifive/errata.c b/arch/riscv/errata/sifive/errata.c index d0c61f86cba3..df80c9614df1 100644 --- a/arch/riscv/errata/sifive/errata.c +++ b/arch/riscv/errata/sifive/errata.c @@ -93,10 +93,8 @@ void sifive_errata_patch_func(struct alt_entry *begin, struct alt_entry *end, for (alt = begin; alt < end; alt++) { if (alt->vendor_id != SIFIVE_VENDOR_ID) continue; - if (alt->patch_id >= ERRATA_SIFIVE_NUMBER) { - WARN(1, "This errata id:%d is not in kernel errata list", alt->patch_id); + if (alt->patch_id >= ERRATA_SIFIVE_NUMBER) continue; - } tmp = (1U << alt->patch_id); if (cpu_req_errata & tmp) { -- cgit v1.2.3 From cfca5a48b03fbd33c8cb84cb73ee2e34467f3a33 Mon Sep 17 00:00:00 2001 From: Troy Mitchell Date: Mon, 27 Jul 2026 01:08:44 -0700 Subject: riscv: mm: fix SWIOTLB initialization for systems with DRAM above 4GB On RISC-V platforms where the entire physical memory (DRAM) resides above the 32-bit address space (i.e., above dma32_phys_limit), the current SWIOTLB initialization logic fails. This patch addresses two interconnected issues on such platforms: 1. Incorrect 32-bit DMA bounce assumption: The existing condition `max_pfn > PFN_DOWN(dma32_phys_limit)` assumes that a 32-bit DMA bounce buffer is required simply because the maximum PFN exceeds the 32-bit limit. However, if all DRAM starts above 4GB, no memory exists below the limit to satisfy this allocation. Fix this by adding a check to ensure `memblock_start_of_DRAM()` is actually below the 32-bit limit before enforcing 32-bit SWIOTLB. 2. kmalloc() bounce buffer allocation failure on non-coherent systems: For non-coherent DMA, kmalloc() buffers whose sizes are not cache-line-aligned still require bouncing, even if 32-bit DMA bouncing is skipped. Without the `SWIOTLB_ANY` flag, swiotlb_init() defaults to allocating from low memory, which fails completely when DRAM only exists in high memory. By appending `SWIOTLB_ANY` to swiotlb_flags, the allocator is permitted to allocate this bounce buffer from high memory. With this patch, systems with non-coherent DMA and DRAM entirely above 4GB can successfully map the software IO TLB in high memory and boot normally. Tested-by: Anirudh Srinivasan Signed-off-by: Troy Mitchell Link: https://patch.msgid.link/20260727-fix-riscv-swiotlb-v3-1-59479b23736c@linux.dev Reviewed-by: Drew Fustini Signed-off-by: Paul Walmsley --- arch/riscv/mm/init.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index 3e450890be07..395ed9ab578e 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -164,7 +164,9 @@ static void print_vm_layout(void) { } void __init arch_mm_preinit(void) { - bool swiotlb = max_pfn > PFN_DOWN(dma32_phys_limit); + bool swiotlb = max_pfn > PFN_DOWN(dma32_phys_limit) && + memblock_start_of_DRAM() < dma32_phys_limit; + unsigned int swiotlb_flags = SWIOTLB_VERBOSE; #ifdef CONFIG_FLATMEM BUG_ON(!mem_map); #endif /* CONFIG_FLATMEM */ @@ -172,17 +174,22 @@ void __init arch_mm_preinit(void) if (IS_ENABLED(CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC) && !swiotlb && dma_cache_alignment != 1) { /* - * If no bouncing needed for ZONE_DMA, allocate 1MB swiotlb - * buffer per 1GB of RAM for kmalloc() bouncing on - * non-coherent platforms. + * No 32-bit DMA bouncing needed (either all DRAM is within + * the 32-bit limit, or it all starts above it), but + * kmalloc() buffers whose sizes are not cache-line-aligned + * still require bouncing for non-coherent DMA. Use + * SWIOTLB_ANY so that the buffer can be allocated from high + * memory when DRAM starts above dma32_phys_limit. Allocate + * ~1 MB per 1 GB of RAM. */ unsigned long size = DIV_ROUND_UP(memblock_phys_mem_size(), 1024); swiotlb_adjust_size(min(swiotlb_size_or_default(), size)); swiotlb = true; + swiotlb_flags |= SWIOTLB_ANY; } - swiotlb_init(swiotlb, SWIOTLB_VERBOSE); + swiotlb_init(swiotlb, swiotlb_flags); print_vm_layout(); } -- cgit v1.2.3 From c786d2bdf1f3964deee192ad942dee2a741c1e2c Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Tue, 28 Jul 2026 21:49:51 +0900 Subject: tracing/mmiotrace: Reset dropped_count in mmio_reset_data() mmio_reset_data() is called during tracer initialization, reset, and start. While it resets overrun_detected and prev_overruns, it neglects to reset dropped_count. Consequently, dropped event counts from prior tracing sessions persist in dropped_count and corrupt overrun reports in subsequent runs. Fix this by explicitly calling atomic_set(&dropped_count, 0) in mmio_reset_data(). Link: https://patch.msgid.link/178524299122.56416.16277704230639425172.stgit@devnote2 Fixes: 173ed24ee2d6 ("mmiotrace: count events lost due to not recording") Assisted-by: Antigravity:gemini-3.6-flash Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt --- kernel/trace/trace_mmiotrace.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index b88b8d9923ad..e064ba3f28cb 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -29,6 +29,7 @@ static void mmio_reset_data(struct trace_array *tr) { overrun_detected = false; prev_overruns = 0; + atomic_set(&dropped_count, 0); tracing_reset_online_cpus(&tr->array_buffer); } -- cgit v1.2.3 From 12b80cdbc54cf615b4717a4e8180063408091ea2 Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Tue, 28 Jul 2026 21:50:00 +0900 Subject: tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of __trace_mmiotrace_rw() and __trace_mmiotrace_map(). Link: https://patch.msgid.link/178524300062.56416.8362487250709962380.stgit@devnote2 Fixes: f984b51e0779 ("ftrace: add mmiotrace plugin") Assisted-by: Antigravity:gemini-3.6-flash Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt --- kernel/trace/trace_mmiotrace.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index e064ba3f28cb..df8692c2dea8 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -294,11 +294,15 @@ device_initcall(init_mmio_trace); static void __trace_mmiotrace_rw(struct trace_array *tr, struct mmiotrace_rw *rw) { - struct trace_buffer *buffer = tr->array_buffer.buffer; + struct trace_buffer *buffer; struct ring_buffer_event *event; struct trace_mmiotrace_rw *entry; unsigned int trace_ctx; + if (!tr) + return; + + buffer = tr->array_buffer.buffer; trace_ctx = tracing_gen_ctx_flags(0); event = trace_buffer_lock_reserve(buffer, TRACE_MMIO_RW, sizeof(*entry), trace_ctx); @@ -321,11 +325,15 @@ void mmio_trace_rw(struct mmiotrace_rw *rw) static void __trace_mmiotrace_map(struct trace_array *tr, struct mmiotrace_map *map) { - struct trace_buffer *buffer = tr->array_buffer.buffer; + struct trace_buffer *buffer; struct ring_buffer_event *event; struct trace_mmiotrace_map *entry; unsigned int trace_ctx; + if (!tr) + return; + + buffer = tr->array_buffer.buffer; trace_ctx = tracing_gen_ctx_flags(0); event = trace_buffer_lock_reserve(buffer, TRACE_MMIO_MAP, sizeof(*entry), trace_ctx); -- cgit v1.2.3 From ac8719969e6c3c54e939834df812bc41f25453cf Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Wed, 29 Jul 2026 09:27:58 +0900 Subject: tracing: Check return value of __register_event() in trace_module_add_events() trace_module_add_events() ignores the return value of __register_event() and unconditionally calls __add_event_to_tracers() for each event. If __register_event() fails (for example, if event_init() fails), the trace_event_call is not added to ftrace_events list, but __add_event_to_tracers() still creates a trace_event_file pointing to it. If module loading subsequently fails and module memory is freed, tracing state retains a stale trace_event_call pointer in trace_event_file, leading to a use-after-free when tracefs or tracing subsystem operations are later executed. Fix this by checking the return value of __register_event() and only calling __add_event_to_tracers() if event registration succeeded. Fixes: ae63b31e4d0e ("tracing: Separate out trace events from global variables") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/178528487878.124250.14170824576025743236.stgit@devnote2 Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt --- kernel/trace/trace_events.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 956692856fa8..c01b10b99f67 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -3933,8 +3933,8 @@ static void trace_module_add_events(struct module *mod) end = mod->trace_events + mod->num_trace_events; for_each_event(call, start, end) { - __register_event(*call, mod); - __add_event_to_tracers(*call); + if (!__register_event(*call, mod)) + __add_event_to_tracers(*call); } update_cache_events(mod); -- cgit v1.2.3 From c22c7b735f9810ad276014f788f9aa5c879ec238 Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Wed, 29 Jul 2026 09:28:07 +0900 Subject: tracing/filters: Fix false positive match in regex_match_full() regex_match_full() calls strncmp(str, r->pattern, len) where len is the target field buffer size. When len is smaller than r->len (the filter pattern length), strncmp() checks only len bytes of r->pattern against str. If those len bytes match, strncmp() returns 0, resulting in a false-positive match where a shorter string in a fixed-size field matches a longer filter pattern. For example, a 4-byte static string field containing "abcd" matched the filter pattern "abcdefgh" because strncmp("abcd", "abcdefgh", 4) returned 0. In this case, @len does NOT include '\0' because it is fixed-size array. Fix this by returning 0 (no match) early when len < r->len. Fixes: 1889d20922d1 ("tracing/filters: Provide basic regex support") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/178528488779.124250.5571741156199253769.stgit@devnote2 Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt --- kernel/trace/trace_events_filter.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 6385cd662d8d..2b46ca536045 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -1027,6 +1027,9 @@ static int regex_match_full(char *str, struct regex *r, int len) if (!len) return strcmp(str, r->pattern) == 0; + if (len < r->len) + return 0; + return strncmp(str, r->pattern, len) == 0; } -- cgit v1.2.3 From f51fed61eea0daba2f95f1a6074085e4cd513c7b Mon Sep 17 00:00:00 2001 From: Anirudh Srinivasan Date: Fri, 12 Jun 2026 11:24:43 -0500 Subject: riscv: drop __init from vec_check_unaligned_access_speed_all_cpus This function runs within a kthread and need not necessarily finish before system finishes boot and free_initmem() unmaps the .init.text section. This function makes calls to SBI for probing unaligned access speed, and if this is slow for some reason (say some debug prints were added to SBI), the kthread can still be running at this point and result in an instruction page fault when trying to fetch from the freed region. [ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8 [ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000 [ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3 [ 25.661244] Oops [#1] [ 25.662997] Modules linked in: [ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY [ 25.674669] Hardware name: Tenstorrent Blackhole (DT) [ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20 [ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000 [ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30 [ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002 [ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000 [ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30 [ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0 [ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402 [ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000 [ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c [ 25.755060] [] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.760964] [] kthread+0xd8/0xfc [ 25.764660] [] ret_from_fork_kernel+0x18/0x1c4 [ 25.769220] [] ret_from_fork_kernel_asm+0x16/0x18 [ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc Drop __init from its signature so that this doesn't happen. Fixes: a00e022be531 ("riscv: Annotate unaligned access init functions") Signed-off-by: Anirudh Srinivasan Assisted-by: Claude:claude-opus-4-6 Link: https://patch.msgid.link/20260612-vec_unaligned_drop_init-v1-1-df969210ae34@oss.tenstorrent.com Signed-off-by: Paul Walmsley --- arch/riscv/kernel/unaligned_access_speed.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/kernel/unaligned_access_speed.c b/arch/riscv/kernel/unaligned_access_speed.c index bb57eb5d19df..5a5aa22124e7 100644 --- a/arch/riscv/kernel/unaligned_access_speed.c +++ b/arch/riscv/kernel/unaligned_access_speed.c @@ -289,7 +289,7 @@ free: } /* Measure unaligned access speed on all CPUs present at boot in parallel. */ -static int __init vec_check_unaligned_access_speed_all_cpus(void *unused __always_unused) +static int vec_check_unaligned_access_speed_all_cpus(void *unused __always_unused) { schedule_on_each_cpu(check_vector_unaligned_access); riscv_hwprobe_complete_async_probe(); @@ -297,7 +297,7 @@ static int __init vec_check_unaligned_access_speed_all_cpus(void *unused __alway return 0; } #else /* CONFIG_RISCV_PROBE_VECTOR_UNALIGNED_ACCESS */ -static int __init vec_check_unaligned_access_speed_all_cpus(void *unused __always_unused) +static int vec_check_unaligned_access_speed_all_cpus(void *unused __always_unused) { return 0; } -- cgit v1.2.3 From 52075128273ace53e6254e37899a47d40d4baf45 Mon Sep 17 00:00:00 2001 From: Pratik Vishwakarma Date: Wed, 29 Jul 2026 05:54:59 +0000 Subject: x86/CPU/AMD: Carve out a Zen5 models range Family 0x1a, model 0xd0..0xd7 belongs to the Zen5 generation. Carve it out from the larger, Zen6 range where former doesn't belong. [ bp: Rewrite commit message, add tags. ] Fixes: b5f53e6d3d32 ("x86/CPU/AMD: Add more Zen6 models") Signed-off-by: Pratik Vishwakarma Signed-off-by: Borislav Petkov (AMD) Cc: Link: https://patch.msgid.link/20260729055459.15904-1-Pratik.Vishwakarma@amd.com --- arch/x86/kernel/cpu/amd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 487ac147e11f..d61df70d6875 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -515,11 +515,13 @@ static void bsp_init_amd(struct cpuinfo_x86 *c) case 0x00 ... 0x2f: case 0x40 ... 0x4f: case 0x60 ... 0x7f: + case 0xd0 ... 0xd7: setup_force_cpu_cap(X86_FEATURE_ZEN5); break; case 0x50 ... 0x5f: case 0x80 ... 0xaf: - case 0xc0 ... 0xef: + case 0xc0 ... 0xcf: + case 0xd8 ... 0xef: setup_force_cpu_cap(X86_FEATURE_ZEN6); break; default: -- cgit v1.2.3 From f865c143629d4094866a811dba5f329250bad486 Mon Sep 17 00:00:00 2001 From: Zhan Xusheng Date: Sat, 18 Jul 2026 13:09:22 +0800 Subject: audit: fix potential integer overflow in audit_log_n_string() audit_log_n_string() computes new_len as "slen + 3" (enclosing quotes plus the NUL terminator) and stores it into an int, while slen is a size_t. For a sufficiently large slen the addition can overflow and/or the result be truncated when assigned to the int new_len, so the "new_len > avail" check can be bypassed and the subsequent memcpy(ptr, string, slen) can write past the skb tail. This is the same class of bug that was fixed for the hex sibling in commit 65dfde57d1e2 ("audit: fix potential integer overflow in audit_log_n_hex()"); both helpers are reached through audit_log_n_untrustedstring() with the same length source. Make new_len a size_t and use check_add_overflow() to catch the overflow, mirroring the audit_log_n_hex() fix. No functional change for the in-tree callers, which all pass bounded lengths. Cc: stable@vger.kernel.org Fixes: 168b7173959f ("AUDIT: Clean up logging of untrusted strings") Signed-off-by: Zhan Xusheng Signed-off-by: Paul Moore --- kernel/audit.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/kernel/audit.c b/kernel/audit.c index 562476937fa7..9412af9144bc 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -2120,7 +2120,8 @@ void audit_log_n_hex(struct audit_buffer *ab, const unsigned char *buf, void audit_log_n_string(struct audit_buffer *ab, const char *string, size_t slen) { - int avail, new_len; + int avail; + size_t new_len; unsigned char *ptr; struct sk_buff *skb; @@ -2130,7 +2131,13 @@ void audit_log_n_string(struct audit_buffer *ab, const char *string, BUG_ON(!ab->skb); skb = ab->skb; avail = skb_tailroom(skb); - new_len = slen + 3; /* enclosing quotes + null terminator */ + + /* enclosing quotes + null terminator */ + if (check_add_overflow(slen, 3, &new_len)) { + audit_log_format(ab, "?"); + return; + } + if (new_len > avail) { avail = audit_expand(ab, new_len); if (!avail) -- cgit v1.2.3 From 246df90b5f1a8a6e6abbd2f058b029558720adec Mon Sep 17 00:00:00 2001 From: Luxiao Xu Date: Tue, 21 Jul 2026 23:37:41 +0800 Subject: audit: fix potential use-after-free in audit_del_rule() `audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()` before unlinking the rule from RCU-visible filter lists and waiting for a grace period. Concurrent readers in `audit_filter()` and `audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify mark can be freed on an independent lifetime path. This creates a use-after-free window during rule deletion. Fix this by unlinking the rule from the RCU-visible lists and invoking `synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other rule removal helpers). This ensures that all existing RCU readers have exited the critical section before any underlying resources are destroyed. Cc: stable@vger.kernel.org Fixes: 34d99af52ad4 ("audit: implement audit by executable") Reported-by: Vega Assisted-by: Codex:gpt-5.4 Signed-off-by: Luxiao Xu Signed-off-by: Ren Wei Signed-off-by: Paul Moore --- kernel/auditfilter.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 4401119b5275..7f791afe5791 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1045,6 +1045,10 @@ int audit_del_rule(struct audit_entry *entry) goto out; } + list_del_rcu(&e->list); + list_del(&e->rule.list); + synchronize_rcu(); + if (e->rule.watch) audit_remove_watch_rule(&e->rule); @@ -1062,8 +1066,6 @@ int audit_del_rule(struct audit_entry *entry) audit_signals--; #endif - list_del_rcu(&e->list); - list_del(&e->rule.list); call_rcu(&e->rcu, audit_free_rule_rcu); out: -- cgit v1.2.3 From d6c075f797a672a6e3bd2fd44aee713801698ec2 Mon Sep 17 00:00:00 2001 From: Muhammad Bilal Date: Thu, 18 Jun 2026 02:25:20 +0500 Subject: accel/qaic: use sizeof(*trans_hdr) for transaction length check In encode_message() the per-transaction lower-bound check compares trans_hdr->len against sizeof(trans_hdr), i.e. the size of the pointer, instead of sizeof(*trans_hdr), the size of struct qaic_manage_trans_hdr. Every other length check in this file (encode_message() at the loop guard, decode_message(), etc.) correctly uses sizeof(*trans_hdr), so this is an inconsistency. On 64-bit builds the pointer and the struct are both 8 bytes, so the check is correct by coincidence and there is no behavioural change. On 32-bit builds the pointer is 4 bytes, which weakens the minimum-length check below the 8-byte header size. Use sizeof(*trans_hdr) so the check validates against the actual transaction header size on all builds. Fixes: ea33cb6fc278 ("accel/qaic: tighten bounds checking in encode_message()") Signed-off-by: Muhammad Bilal Reviewed-by: Jeff Hugo Signed-off-by: Jeff Hugo Link: https://patch.msgid.link/20260617212520.59801-1-meatuni001@gmail.com --- drivers/accel/qaic/qaic_control.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/accel/qaic/qaic_control.c b/drivers/accel/qaic/qaic_control.c index bb94d3556904..50bf3340e49c 100644 --- a/drivers/accel/qaic/qaic_control.c +++ b/drivers/accel/qaic/qaic_control.c @@ -786,7 +786,7 @@ static int encode_message(struct qaic_device *qdev, struct manage_msg *user_msg, break; } trans_hdr = (struct qaic_manage_trans_hdr *)(user_msg->data + user_len); - if (trans_hdr->len < sizeof(trans_hdr) || + if (trans_hdr->len < sizeof(*trans_hdr) || size_add(user_len, trans_hdr->len) > user_msg->len) { ret = -EINVAL; break; -- cgit v1.2.3 From 7d3aae206663c4e006b25a1c7a20a4029e67da76 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 10 Jul 2026 09:20:51 -0700 Subject: KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC is fully enabled prior to running L2, and is then inhibited while L2 is active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled, but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of the host's APIC state, send arbitrary interrupts, change task priority, and ultimately trivially DoS the host. E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields: Spurious interrupt (vector 0xee) on CPU#425. Acked And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields: ------------[ cut here ]------------ WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940 CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026 RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd] Call Trace: sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80 asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20 RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm] kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm] kvm_vcpu_ioctl+0x580/0x6b0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46ff4b ---[ end trace 0000000000000000 ]--- Fixes: 091abbf578f9 ("KVM: x86: nSVM: optimize svm_set_x2apic_msr_interception") Cc: stable@vger.kernel.org Cc: Yosry Ahmed Signed-off-by: Sean Christopherson Link: https://patch.msgid.link/20260729213558.639074-1-pbonzini@redhat.com/ Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/avic.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c index 58e493a80cb0..16e09a8fe85e 100644 --- a/arch/x86/kvm/svm/avic.c +++ b/arch/x86/kvm/svm/avic.c @@ -240,14 +240,6 @@ static void avic_deactivate_vmcb(struct vcpu_svm *svm) if (!is_sev_es_guest(&svm->vcpu)) svm_set_intercept(svm, INTERCEPT_CR8_WRITE); - /* - * If running nested and the guest uses its own MSR bitmap, there - * is no need to update L0's msr bitmap - */ - if (is_guest_mode(&svm->vcpu) && - vmcb12_is_intercept(&svm->nested.ctl, INTERCEPT_MSR_PROT)) - return; - /* Enabling MSR intercept for x2APIC registers */ avic_set_x2apic_msr_interception(svm, true); } -- cgit v1.2.3 From a65f5179d3f0c93da31b450aeb416eaa22f1912b Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Wed, 29 Jul 2026 15:56:46 +0800 Subject: drm/amd/pm: hide pp_table sysfs on APUs APUs use firmware-owned DPM tables and do not support replacement through pp_table. Generic callbacks can nevertheless expose the sysfs file and accept an upload before resetting the power management stack. Treat pp_table as unsupported on APUs. Use the same platform check in the get and set paths to hide the file and reject uploads. Fixes: 289921b03fe5 ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)") Signed-off-by: Yang Wang Reviewed-by: Kenneth Feng Reviewed-by: Asad Kamal Signed-off-by: Alex Deucher (cherry picked from commit 74f28db2db69777cd2f059d50fe34e365ddd5add) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c index 6d1ad4d5b8f0..e5e89294958a 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c @@ -1183,6 +1183,13 @@ int amdgpu_dpm_dispatch_task(struct amdgpu_device *adev, return ret; } +static bool amdgpu_dpm_is_pp_table_allowed(struct amdgpu_device *adev) +{ + return !amdgpu_sriov_vf(adev) && + !(adev->flags & AMD_IS_APU) && + !adev->scpm_enabled; +} + int amdgpu_dpm_get_pp_table(struct amdgpu_device *adev, char *table, size_t size) { @@ -1193,7 +1200,8 @@ int amdgpu_dpm_get_pp_table(struct amdgpu_device *adev, char *table, if ((!table && size) || (table && !size)) return -EINVAL; - if (amdgpu_sriov_vf(adev) || !pp_funcs->get_pp_table || adev->scpm_enabled) + if (!amdgpu_dpm_is_pp_table_allowed(adev) || + !pp_funcs->get_pp_table) return -EOPNOTSUPP; mutex_lock(&adev->pm.mutex); @@ -1717,7 +1725,8 @@ int amdgpu_dpm_set_pp_table(struct amdgpu_device *adev, if (!buf || !size) return -EINVAL; - if (amdgpu_sriov_vf(adev) || !pp_funcs->set_pp_table || adev->scpm_enabled) + if (!amdgpu_dpm_is_pp_table_allowed(adev) || + !pp_funcs->set_pp_table) return -EOPNOTSUPP; mutex_lock(&adev->pm.mutex); -- cgit v1.2.3 From 8419331e64d92a8de5fc4feef0e305f201fb8b33 Mon Sep 17 00:00:00 2001 From: Leo Li Date: Tue, 28 Jul 2026 13:02:47 -0400 Subject: drm/amd/display: Exit idle optimizations before programming [Why] We need to exit PSR/IPS before programming. Before calling DC for programming in amdgpu_dm_commit_planes(), there's a vblank_control_workqueue flush. This waits for IPS and PSR exit. (See drm_vblank_on/off() > amdgpu_dm_crtc_set_vblank() --queue_work()-> amdgpu_dm_crtc_vblank_control_worker()) Prior to the tagged "Fixes:" change, drm_vblank_get() was called before the workqueue flush. This ordering ensures that PSR exit occurred before programming. After the "Fixes:" change, drm_vblank_get() is called after the workqueue flush, leading to programming while idle optimizations are still active. This can lead to incorrect flip_pending detection used by vblank event delivery. [How] Split the vblank_get() component of `dm_arm_vblank_event()` into `dm_arm_vblank_event_pre_programming()`, which is called before programming. Call it before the vblank_control_workqueue flush. Includes a drive-by cleanup of prepare_flip_isr(): the only caller is dm_arm_vblank_event() and it's simple enough to roll-in. v2: Fix checkpatch formatting warning on drm_arm_vblank_event_pre_programming() arg alignment. Fixes: 48ab86360af1 ("drm/amd/display: check GRPH_FLIP status before sending event") Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141#note_3583205 Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5527 Assisted-by: Codex:gpt-5.6-sol Assisted-by: Claude:opus-5 Suggested-by: David Weber Signed-off-by: Leo Li Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Alex Deucher (cherry picked from commit 05984e29520a28c27f5a2388742c957a6a87ee7a) --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 78 +++++++++++++---------- 1 file changed, 46 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index eaf19ec843e8..1820547b1dde 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -9903,25 +9903,6 @@ static void remove_stream(struct amdgpu_device *adev, acrtc->enabled = false; } -static void prepare_flip_isr(struct amdgpu_crtc *acrtc) -{ - - assert_spin_locked(&acrtc->base.dev->event_lock); - WARN_ON(acrtc->event); - - acrtc->event = acrtc->base.state->event; - - /* Set the flip status */ - acrtc->pflip_status = AMDGPU_FLIP_SUBMITTED; - - /* Mark this event as consumed */ - acrtc->base.state->event = NULL; - - drm_dbg_state(acrtc->base.dev, - "crtc:%d, pflip_stat:AMDGPU_FLIP_SUBMITTED\n", - acrtc->crtc_id); -} - static void update_freesync_state_on_stream( struct amdgpu_display_manager *dm, struct dm_crtc_state *new_crtc_state, @@ -10274,17 +10255,47 @@ static void dm_arm_vblank_event(struct amdgpu_crtc *acrtc, return; if (pflip_update) { - drm_crtc_vblank_get(&acrtc->base); WARN_ON(acrtc->pflip_status != AMDGPU_FLIP_NONE); - /* Arm flip completion handling and event delivery after programming. */ - prepare_flip_isr(acrtc); + WARN_ON(acrtc->event); + + acrtc->pflip_status = AMDGPU_FLIP_SUBMITTED; + acrtc->event = acrtc->base.state->event; + acrtc->base.state->event = NULL; + + drm_dbg_state(acrtc->base.dev, + "crtc:%d, pflip_stat:AMDGPU_FLIP_SUBMITTED\n", + acrtc->crtc_id); } else if (cursor_update) { - drm_crtc_vblank_get(&acrtc->base); acrtc->event = acrtc->base.state->event; acrtc->base.state->event = NULL; } } +/** + * dm_arm_vblank_event_pre_programming - Prepare for programming + * @acrtc: The amdgpu CRTC to prepare + * @acrtc_state: The new CRTC state + * @pflip_update: Whether a page flip is being programmed + * @cursor_update: Whether a cursor update is being programmed + * + * Grab a reference on the vblank counter if a page flip or cursor update is to + * be programmed. Do this before programming so the HW is not in any + * idle-optimized state (such as PSR). + */ +static void dm_arm_vblank_event_pre_programming(struct amdgpu_crtc *acrtc, + struct dm_crtc_state *acrtc_state, + bool pflip_update, + bool cursor_update) +{ + assert_spin_locked(&acrtc->base.dev->event_lock); + + if (!acrtc->base.state->event || acrtc_state->active_planes == 0) + return; + + if (pflip_update || cursor_update) + drm_crtc_vblank_get(&acrtc->base); +} + static void amdgpu_dm_commit_planes(struct drm_atomic_commit *state, struct drm_device *dev, struct amdgpu_display_manager *dm, @@ -10550,16 +10561,19 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_commit *state, } } - /* - * DCE depends on a combination of GRPH_FLIP, VLINE0, and VUPDATE for - * event delivery. Only GRPH_FLIP handler can send pflip events, and it - * only fires if HW latched to the flip. Maintain legacy behavior by - * arming event before programming. - */ - if (amdgpu_ip_version(dm->adev, DCE_HWIP, 0) == 0) { - scoped_guard(spinlock_irqsave, &pcrtc->dev->event_lock) { + scoped_guard(spinlock_irqsave, &pcrtc->dev->event_lock) { + dm_arm_vblank_event_pre_programming(acrtc_attach, acrtc_state, + pflip_present, + cursor_update); + /* + * DCE depends on a combination of GRPH_FLIP, VLINE0, and + * VUPDATE for event delivery. Only GRPH_FLIP handler can send + * pflip events, and it only fires if HW latched to the flip. + * Maintain legacy behavior by arming event before programming. + */ + if (amdgpu_ip_version(dm->adev, DCE_HWIP, 0) == 0) { dm_arm_vblank_event(acrtc_attach, acrtc_state, - pflip_present, cursor_update); + pflip_present, cursor_update); } } -- cgit v1.2.3 From d0ecbedd6a70f2fe768d46de740265dc8a4424e3 Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Tue, 28 Jul 2026 17:01:11 +0800 Subject: ASoC: rt722: reset codec to fix abnormal sound The audio output may become abnormal after a warm reboot from Windows. Reset the codec once during hardware initialization to restore it to a known state and prevent the issue. BugLink: https://github.com/thesofproject/linux/issues/5845 Signed-off-by: Shuming Fan Link: https://patch.msgid.link/20260728090111.3676617-1-shumingf@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt722-sdca-sdw.c | 4 ++++ sound/soc/codecs/rt722-sdca.c | 14 ++++++++++++++ 2 files changed, 18 insertions(+) diff --git a/sound/soc/codecs/rt722-sdca-sdw.c b/sound/soc/codecs/rt722-sdca-sdw.c index e68aa0350a5b..7482a9a8d198 100644 --- a/sound/soc/codecs/rt722-sdca-sdw.c +++ b/sound/soc/codecs/rt722-sdca-sdw.c @@ -113,6 +113,7 @@ static int rt722_sdca_mbq_size(struct device *dev, unsigned int reg) case 0x2000090 ... 0x2000094: case 0x20000b1: case 0x20000b4: + case 0x3010000: case 0x3110000: case 0x5300000 ... 0x5300300: case 0x5400002: @@ -196,15 +197,18 @@ static bool rt722_sdca_volatile_register(struct device *dev, unsigned int reg) case 0x2000007: case 0x200000d: case 0x2000019: + case 0x200001a: case 0x2000020: case 0x2000030: case 0x2000046: case 0x2000067: case 0x2000084: case 0x2000086: + case 0x3010000: case 0x3110000: case 0x5800003: case 0x5810000: + case 0x6100008: case 0x44011000 ... 0x440115ff: case 0x44012000: case 0x44012021: diff --git a/sound/soc/codecs/rt722-sdca.c b/sound/soc/codecs/rt722-sdca.c index 1b6729f363fc..6b509eb65d77 100644 --- a/sound/soc/codecs/rt722-sdca.c +++ b/sound/soc/codecs/rt722-sdca.c @@ -1851,6 +1851,17 @@ static void rt722_sdca_jack_preset(struct rt722_sdca_priv *rt722) } } +static void rt722_sdca_reset(struct rt722_sdca_priv *rt722) +{ + rt722_sdca_index_update_bits(rt722, RT722_VENDOR_REG, + RT722_LDO1_CTL, RT722_HIDDEN_REG_SW_RESET, + RT722_HIDDEN_REG_SW_RESET); + rt722_sdca_index_update_bits(rt722, RT722_VENDOR_HDA_CTL, + RT722_HDA_LEGACY_RESET_CTL, 0x1, 0x1); + if (rt722->hw_vid == RT722_VA) + rt722_sdca_index_write(rt722, RT722_VENDOR_REG, RT722_LDO1_CTL, 0xb091); +} + int rt722_sdca_io_init(struct device *dev, struct sdw_slave *slave) { struct rt722_sdca_priv *rt722 = dev_get_drvdata(dev); @@ -1888,6 +1899,9 @@ int rt722_sdca_io_init(struct device *dev, struct sdw_slave *slave) rt722->hw_vid = (val & 0x0f00) >> 8; dev_dbg(&slave->dev, "%s hw_vid=0x%x\n", __func__, rt722->hw_vid); + if (!rt722->first_hw_init) + rt722_sdca_reset(rt722); + rt722_sdca_dmic_preset(rt722); rt722_sdca_amp_preset(rt722); rt722_sdca_jack_preset(rt722); -- cgit v1.2.3 From e5a259d98823a93459643b239b71fed7589ab669 Mon Sep 17 00:00:00 2001 From: Yafang Shao Date: Tue, 28 Jul 2026 10:49:50 +0800 Subject: kbuild: rpm-pkg: Preserve BTF sections in kernel modules during debuginfo stripping After switching to the kernel's default package scripts for our local kernel RPM builds, we noticed that module BTF entries were missing: $ ls /sys/kernel/btf/ vmlinux <<<< only vmlinux, no module BTF Root cause: find-debuginfo.sh (from the debugedit package) prefers eu-strip over strip when elfutils is installed, which is the common case on RHEL 9. eu-strip removes non-allocated ELF sections, including the .BTF section that contains BPF Type Format information for kernel modules. Without .BTF, BPF tools (bpftool, bcc, bpftrace) cannot resolve kernel types at runtime, and /sys/kernel/btf/ entries are not created when modules are loaded. Additionally, since commit 8646db238997 ("libbpf,bpf: Share BTF relocate-related code with kernel"), modules contain a .BTF.base section that maps distilled type IDs to vmlinux types. If .BTF.base is stripped, btf_parse_module() falls back to vmlinux BTF directly, causing type ID mismatches and rejecting the module's BTF entirely. Fix by passing --keep-section .BTF and --keep-section .BTF.base via _find_debuginfo_opts, which adds -K .BTF and -K .BTF.base to the eu-strip/strip command, preserving both sections while allowing normal debuginfo extraction to proceed. After this change, all module BTF files are properly generated: $ ls /sys/kernel/btf/ aesni_intel drm i2c_i801 mfd_core ahci drm_client_lib i2c_mux net_failover backlight drm_kms_helper i2c_smbus pcspkr ccp drm_shmem_helper input_leds qemu_fw_cfg dm_log failover intel_rapl_common sch_fq_codel dm_mirror fat intel_rapl_msr serio_raw dm_mod fuse irqbypass sunrpc dm_region_hash gf128mul iTCO_wdt vfat virtio_balloon virtio_console virtio_dma_buf virtio_gpu virtio_net virtio_rng virtio_blk vmlinux xfs Suggested-by: Nathan Chancellor Signed-off-by: Yafang Shao Cc: Alan Maguire Link: https://patch.msgid.link/20260728024950.44946-1-laoar.shao@gmail.com Signed-off-by: Nathan Chancellor --- scripts/package/kernel.spec | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/scripts/package/kernel.spec b/scripts/package/kernel.spec index c732415662ef..46e80970f723 100644 --- a/scripts/package/kernel.spec +++ b/scripts/package/kernel.spec @@ -67,7 +67,18 @@ This package provides debug information for the kernel image and modules from th %undefine _unique_debug_srcs %undefine _debugsource_packages %undefine _debuginfo_subpackages + +# Preserve .BTF and .BTF.base sections in kernel modules during debuginfo +# stripping. find-debuginfo.sh uses eu-strip which removes non-allocated ELF +# sections like .BTF by default. .BTF.base is required for BTF distillation +# support; without it, module BTF validation fails. +%global with_keep_section %(%{__find_debuginfo} --help 2>&1 | grep -c keep-section) +%if %{with_keep_section} +%global _find_debuginfo_opts -r --keep-section .BTF --keep-section .BTF.base +%else %global _find_debuginfo_opts -r +%endif + %global _missing_build_ids_terminate_build 1 %global _no_recompute_build_ids 1 %{debug_package} -- cgit v1.2.3 From a0188cc133696627857d16054e43f9ebc7efc821 Mon Sep 17 00:00:00 2001 From: Karl Mehltretter Date: Wed, 29 Jul 2026 03:21:32 +0200 Subject: riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove remove_pud_mapping() and remove_p4d_mapping() obtain a child table base with pud_offset(p4dp, 0) and p4d_offset(pgd, 0), then add the index for addr. RISC-V folds page-table levels at runtime. When a level is folded, its offset helper returns the parent entry itself, but the index can still be nonzero. Adding it walks past the parent table. Sv48 folds P4D, while Sv39 folds both P4D and PUD, so memory hot-remove can descend into unrelated memory and pass an invalid page to __free_pages(). This can trigger: kernel BUG at include/linux/mm.h:1810! VM_BUG_ON_PAGE(page_ref_count(page) == 0) arch_remove_memory+0x1e/0x5c try_remove_memory+0x15e/0x200 remove_memory+0x24/0x3c Only add the index when the corresponding page-table level is enabled, matching p4d_offset() and pud_offset(). Fixes: c75a74f4ba19 ("riscv: mm: Add memory hotplugging support") Assisted-by: Claude:claude-fable-5 Signed-off-by: Karl Mehltretter Link: https://patch.msgid.link/20260729012132.24882-1-kmehltretter@gmail.com Signed-off-by: Paul Walmsley --- arch/riscv/mm/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index 395ed9ab578e..b6d149e989c8 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -1625,7 +1625,7 @@ static void __meminit remove_pud_mapping(pud_t *pud_base, unsigned long addr, un for (; addr < end; addr = next) { next = pud_addr_end(addr, end); - pudp = pud_base + pud_index(addr); + pudp = pgtable_l4_enabled ? pud_base + pud_index(addr) : pud_base; pud = pudp_get(pudp); if (!pud_present(pud)) continue; @@ -1656,7 +1656,7 @@ static void __meminit remove_p4d_mapping(p4d_t *p4d_base, unsigned long addr, un for (; addr < end; addr = next) { next = p4d_addr_end(addr, end); - p4dp = p4d_base + p4d_index(addr); + p4dp = pgtable_l5_enabled ? p4d_base + p4d_index(addr) : p4d_base; p4d = p4dp_get(p4dp); if (!p4d_present(p4d)) continue; -- cgit v1.2.3 From 78cd56c2a9d2e8da763cea3b06b636266ca66911 Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Wed, 29 Jul 2026 14:36:09 +0100 Subject: ring-buffer: Fix reader page read offset for remote buffers A page swapped in by __rb_get_reader_page_from_remote() retains its stale read offset, causing subsequent reads to skip events or read past valid data. Fix it. Link: https://patch.msgid.link/20260729133609.4022734-1-vdonnefort@google.com Fixes: fbd1743ecba1 ("ring-buffer: Add non-consuming read for ring-buffer remotes") Signed-off-by: Vincent Donnefort Reviewed-by: Keir Fraser Tested-by: Keir Fraser Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 804ccae694d2..78d3875a47a5 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -5783,6 +5783,7 @@ __rb_get_reader_page_from_remote(struct ring_buffer_per_cpu *cpu_buffer) cpu_buffer->head_page = new_head; cpu_buffer->reader_page = new_reader; + cpu_buffer->reader_page->read = 0; cpu_buffer->pages = &new_head->list; cpu_buffer->read_stamp = new_reader->page->time_stamp; cpu_buffer->lost_events = cpu_buffer->meta_page->reader.lost_events; -- cgit v1.2.3 From a10ea943356b9d70c5616a0a06f6fa97cfdaccb1 Mon Sep 17 00:00:00 2001 From: Hidayath Khan Date: Mon, 27 Jul 2026 11:35:30 +0200 Subject: dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb() look up the dmb_node under dmb_ht_lock, drop the lock and only then operate on the node's refcount. Nothing keeps the node alive across that window: __dibs_lo_unregister_dmb() removes the node from the hash table under the write lock and immediately frees it. A concurrent final put can therefore free the node between the lookup and the refcount operation: CPU0 (attach) CPU1 (owner unregisters) read_lock_bh(&dmb_ht_lock) find dmb_node (refcnt == 1) read_unlock_bh(&dmb_ht_lock) refcount_dec_and_test() 1 -> 0 write_lock_bh(&dmb_ht_lock) hash_del(&dmb_node->list) write_unlock_bh(&dmb_ht_lock) kfree(dmb_node) refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free The same window exists for the refcount_dec_and_test() calls in the detach and unregister paths. Close the race structurally by making hash table membership and the refcount transitions atomic with respect to each other: - Perform the final refcount_dec_and_test() and hash_del() in a single dmb_ht_lock write-side critical section, in both the unregister and the detach path. Freeing the node still happens after the lock is dropped, which is safe because a node whose refcount reached zero has left the hash table and can no longer be found. - This establishes the invariant that any node found in the hash table holds at least one reference, and that the final reference can only be dropped under the write lock. dibs_lo_attach_dmb() can thus take its reference with a plain refcount_inc() while still holding the read lock; refcount_inc_not_zero() is no longer needed. __dibs_lo_unregister_dmb() no longer touches the hash table and is renamed to dibs_lo_free_dmb() accordingly. Note: commit cc21191b584c ("dibs: Move data path to dibs layer") moved the code to its current location; the race was introduced earlier by commit c3a910f2380f ("net/smc: implement DMB-merged operations of loopback-ism"). Tested SMC-D via ISM and dibs loopback. Cc: stable@vger.kernel.org Fixes: c3a910f2380f ("net/smc: implement DMB-merged operations of loopback-ism") Reported-by: Rahul Chandelkar Signed-off-by: Hidayath Khan Reviewed-by: Alexandra Winter Link: https://patch.msgid.link/20260727093530.968834-1-hidayath@linux.ibm.com Signed-off-by: Jakub Kicinski --- drivers/dibs/dibs_loopback.c | 47 ++++++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 23 deletions(-) diff --git a/drivers/dibs/dibs_loopback.c b/drivers/dibs/dibs_loopback.c index 0f2e09311152..fd5caf1e19a8 100644 --- a/drivers/dibs/dibs_loopback.c +++ b/drivers/dibs/dibs_loopback.c @@ -118,14 +118,9 @@ err_bit: return rc; } -static void __dibs_lo_unregister_dmb(struct dibs_lo_dev *ldev, - struct dibs_lo_dmb_node *dmb_node) +static void dibs_lo_free_dmb(struct dibs_lo_dev *ldev, + struct dibs_lo_dmb_node *dmb_node) { - /* remove dmb from hash table */ - write_lock_bh(&ldev->dmb_ht_lock); - hash_del(&dmb_node->list); - write_unlock_bh(&ldev->dmb_ht_lock); - clear_bit(dmb_node->sba_idx, ldev->sba_idx_mask); folio_put(virt_to_folio(dmb_node->cpu_addr)); kfree(dmb_node); @@ -139,27 +134,33 @@ static int dibs_lo_unregister_dmb(struct dibs_dev *dibs, struct dibs_dmb *dmb) struct dibs_lo_dmb_node *dmb_node = NULL, *tmp_node; struct dibs_lo_dev *ldev; unsigned long flags; + bool last; ldev = dibs->drv_priv; /* find dmb from hash table */ - read_lock_bh(&ldev->dmb_ht_lock); + write_lock_bh(&ldev->dmb_ht_lock); hash_for_each_possible(ldev->dmb_ht, tmp_node, list, dmb->dmb_tok) { if (tmp_node->token == dmb->dmb_tok) { dmb_node = tmp_node; break; } } - read_unlock_bh(&ldev->dmb_ht_lock); - if (!dmb_node) + if (!dmb_node) { + write_unlock_bh(&ldev->dmb_ht_lock); return -EINVAL; + } + last = refcount_dec_and_test(&dmb_node->refcnt); + if (last) + hash_del(&dmb_node->list); + write_unlock_bh(&ldev->dmb_ht_lock); - if (refcount_dec_and_test(&dmb_node->refcnt)) { + if (last) { spin_lock_irqsave(&dibs->lock, flags); dibs->dmb_clientid_arr[dmb_node->sba_idx] = NO_DIBS_CLIENT; spin_unlock_irqrestore(&dibs->lock, flags); - __dibs_lo_unregister_dmb(ldev, dmb_node); + dibs_lo_free_dmb(ldev, dmb_node); } return 0; } @@ -188,14 +189,9 @@ static int dibs_lo_attach_dmb(struct dibs_dev *dibs, struct dibs_dmb *dmb) read_unlock_bh(&ldev->dmb_ht_lock); return -EINVAL; } + refcount_inc(&dmb_node->refcnt); read_unlock_bh(&ldev->dmb_ht_lock); - if (!refcount_inc_not_zero(&dmb_node->refcnt)) - /* the dmb is being unregistered, but has - * not been removed from the hash table. - */ - return -EINVAL; - /* provide dmb information */ dmb->idx = dmb_node->sba_idx; dmb->dmb_tok = dmb_node->token; @@ -209,11 +205,12 @@ static int dibs_lo_detach_dmb(struct dibs_dev *dibs, u64 token) { struct dibs_lo_dmb_node *dmb_node = NULL, *tmp_node; struct dibs_lo_dev *ldev; + bool last; ldev = dibs->drv_priv; /* find dmb_node according to dmb->dmb_tok */ - read_lock_bh(&ldev->dmb_ht_lock); + write_lock_bh(&ldev->dmb_ht_lock); hash_for_each_possible(ldev->dmb_ht, tmp_node, list, token) { if (tmp_node->token == token) { dmb_node = tmp_node; @@ -221,13 +218,17 @@ static int dibs_lo_detach_dmb(struct dibs_dev *dibs, u64 token) } } if (!dmb_node) { - read_unlock_bh(&ldev->dmb_ht_lock); + write_unlock_bh(&ldev->dmb_ht_lock); return -EINVAL; } - read_unlock_bh(&ldev->dmb_ht_lock); + last = refcount_dec_and_test(&dmb_node->refcnt); + if (last) + hash_del(&dmb_node->list); + write_unlock_bh(&ldev->dmb_ht_lock); + + if (last) + dibs_lo_free_dmb(ldev, dmb_node); - if (refcount_dec_and_test(&dmb_node->refcnt)) - __dibs_lo_unregister_dmb(ldev, dmb_node); return 0; } -- cgit v1.2.3 From fc9c7ca5fcbf7fe3bcba87d1ff72f0009071ba86 Mon Sep 17 00:00:00 2001 From: Kiran Kella Date: Mon, 27 Jul 2026 03:16:28 -0700 Subject: psp: fix NULL genl_sock deref race with concurrent netns teardown The race occurs between network namespace removal and PSP device unregistration. When a netns is deleted while a PSP device associated with that netns is concurrently being removed, psp_dev_unregister() triggers psp_nl_notify_dev() to send a device change notification. Concurrently, cleanup_net() running in the netns workqueue calls genl_pernet_exit(), which sets net->genl_sock to NULL. If genl_pernet_exit() wins the race, two sites in psp_nl_multicast_per_ns() then dereference the NULL socket and crash: CPU 0 (netns teardown) CPU 1 (PSP device unregister) ====================== ============================= cleanup_net [workqueue] genl_pernet_exit() psp_dev_unregister() net->genl_sock = NULL psp_nl_notify_dev() psp_nl_multicast_per_ns() build_ntf() -> netlink_has_listeners(NULL) /* crash */ genlmsg_multicast_netns() -> nlmsg_multicast_filtered(NULL) /* crash */ Fix by replacing the bare dev_net() calls with maybe_get_net(). maybe_get_net() returns NULL if the namespace is already dying. Holding the reference ensures genl_sock remains valid across both the build_ntf() and genlmsg_multicast_netns() calls. Fixes: 00c94ca2b99e ("psp: base PSP device support") Fixes: 06c2dce2d0f6 ("psp: add new netlink cmd for dev-assoc and dev-disassoc") Reviewed-by: Ajit Khaparde Reviewed-by: Vikas Gupta Reviewed-by: Bhargava Marreddy Reviewed-by: Akhilesh Samineni Signed-off-by: Kiran Kella Link: https://patch.msgid.link/20260727101628.502042-1-kiran.kella@broadcom.com Signed-off-by: Jakub Kicinski --- net/psp/psp_nl.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/net/psp/psp_nl.c b/net/psp/psp_nl.c index 9610d8c456ff..43b066353c65 100644 --- a/net/psp/psp_nl.c +++ b/net/psp/psp_nl.c @@ -62,7 +62,14 @@ psp_nl_multicast_per_ns(struct psp_dev *psd, unsigned int group, struct net *main_net; struct sk_buff *ntf; - main_net = dev_net(psd->main_netdev); + /* device may be changing netns in parallel */ + rcu_read_lock(); + main_net = maybe_get_net(dev_net_rcu(psd->main_netdev)); + rcu_read_unlock(); + + if (!main_net) + return; + xa_init(&sent_nets); list_for_each_entry(entry, &psd->assoc_dev_list, dev_list) { @@ -88,10 +95,10 @@ psp_nl_multicast_per_ns(struct psp_dev *psd, unsigned int group, /* Send to main device netns */ ntf = build_ntf(psd, main_net, ctx); - if (!ntf) - return; - genlmsg_multicast_netns(&psp_nl_family, main_net, ntf, 0, group, - GFP_KERNEL); + if (ntf) + genlmsg_multicast_netns(&psp_nl_family, main_net, ntf, 0, group, + GFP_KERNEL); + put_net(main_net); } static struct sk_buff *psp_nl_clone_ntf(struct psp_dev *psd, struct net *net, -- cgit v1.2.3 From 93cad1f6bd1e27c75c4a5ab000c2a2fc01181ccf Mon Sep 17 00:00:00 2001 From: Shuangpeng Bai Date: Mon, 27 Jul 2026 14:53:39 -0400 Subject: ipv6: release fib6_null_entry on subtree failure When adding a source-specific route creates a new subtree, fib6_add() installs fib6_null_entry as the temporary leaf of the new subtree root and takes a fib6_info reference for that holder. If adding the first source leaf fails, the code frees the just allocated subtree root but leaves that hold behind. fib6_null_entry is a per-netns sentinel and is freed directly at netns teardown, so this does not keep the object alive. However, it leaves its visible refcount permanently elevated and can eventually saturate the refcount on repeated failures. Drop the null-entry reference before freeing the unlinked subtree root. Fixes: 5ea715289af6 ("ipv6: broadly use fib6_info_hold() helper") Signed-off-by: Shuangpeng Bai Reviewed-by: Ido Schimmel Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20260727185339.1545169-1-shuangpeng.kernel@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv6/ip6_fib.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index a130cdfaebfb..e9fc692d4f3b 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -1494,6 +1494,7 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt, root, and then (in failure) stale node in main tree. */ + fib6_info_release(info->nl_net->ipv6.fib6_null_entry); node_free_immediate(info->nl_net, sfn); err = PTR_ERR(sn); goto failure; -- cgit v1.2.3 From 1c15e75dc21fc61f7bb62f2e8c86d86da01608c5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alvin=20=C5=A0ipraga?= Date: Mon, 27 Jul 2026 22:29:29 +0200 Subject: MAINTAINERS: make Luiz a maintainer and myself reviewer for Realtek DSA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I have changed jobs and therefore no longer have access to hardware using Realtek Ethernet switches. Luiz has kindly agreed to take up the role of maintainer, while I will stick around as a reviewer. Also update .mailmap so that mails to my old company email stop bouncing. Use my new work email for Analog Devices Inc. instead. Signed-off-by: Alvin Šipraga Reviewed-by: Linus Walleij Acked-by: Luiz Angelo Daros de Luca Link: https://patch.msgid.link/20260727-realtek-maintainers-v1-1-ab501adc0cdb@analog.com Signed-off-by: Jakub Kicinski --- .mailmap | 1 + MAINTAINERS | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/.mailmap b/.mailmap index a0f64c31abcc..b66c317e8f06 100644 --- a/.mailmap +++ b/.mailmap @@ -72,6 +72,7 @@ Alice Mikityanska Alice Mikityanska Alice Mikityanska Aloka Dixit +Alvin Šipraga Al Viro Al Viro Amit Blay diff --git a/MAINTAINERS b/MAINTAINERS index 61126d170e4a..2385c27f14b9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22735,7 +22735,8 @@ F: drivers/watchdog/realtek_otto_wdt.c REALTEK RTL83xx SMI DSA ROUTER CHIPS M: Linus Walleij -M: Alvin Šipraga +M: Luiz Angelo Daros de Luca +R: Alvin Šipraga S: Maintained F: Documentation/devicetree/bindings/net/dsa/realtek.yaml F: drivers/net/dsa/realtek/* -- cgit v1.2.3 From 74b21f52c5c5a71a05c0ff70e513f4f04ff28b17 Mon Sep 17 00:00:00 2001 From: Charles Vosburgh Date: Mon, 27 Jul 2026 19:17:30 -0400 Subject: sctp: validate Adaptation Indication parameter length The Adaptation Layer Indication parameter contains a fixed 32-bit Adaptation Code Point after its parameter header. However, sctp_verify_param() accepts a header-only parameter because the generic parameter walker only requires the header to be present. sctp_process_param() then reads adaptation_ind beyond the declared parameter. When the malformed parameter is last in an INIT, the read starts at the receive skb tail, and the value is copied into the state cookie returned in the INIT ACK. This may disclose four receive-buffer tail bytes. Require the declared parameter length to match the fixed structure size and abort the association through the existing invalid parameter length path otherwise. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Charles Vosburgh Acked-by: Xin Long Link: https://patch.msgid.link/20260727-sctp-adaptation-length-v1-1-0ab58b2810a5@gmail.com Signed-off-by: Jakub Kicinski --- net/sctp/sm_make_chunk.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index a1c0334a1038..0ae30c3c8913 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -2171,7 +2171,13 @@ static enum sctp_ierror sctp_verify_param(struct net *net, case SCTP_PARAM_HEARTBEAT_INFO: case SCTP_PARAM_UNRECOGNIZED_PARAMETERS: case SCTP_PARAM_ECN_CAPABLE: + break; case SCTP_PARAM_ADAPTATION_LAYER_IND: + if (ntohs(param.p->length) != sizeof(*param.aind)) { + sctp_process_inv_paramlength(asoc, param.p, + chunk, err_chunk); + retval = SCTP_IERROR_ABORT; + } break; case SCTP_PARAM_SUPPORTED_EXT: -- cgit v1.2.3 From c052927905710de1ab7364bf1925efbd12517ea3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= Date: Thu, 9 Jul 2026 08:49:00 +0200 Subject: riscv: vdso: Only try to install vDSO when present MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit vdso.so.dbg is only built with CONFIG_MMU. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202607090258.iSAUYlO1-lkp@intel.com/ Fixes: f157d411a9eb ("riscv: add missing vdso_install target") Fixes: 3edf39916977 ("vDSO, kbuild: Provide vDSO debug variants at runtime") Signed-off-by: Thomas Weißschuh Link: https://patch.msgid.link/20260709-riscv-install-vdso-v1-1-0ba4345419ca@linutronix.de Signed-off-by: Paul Walmsley --- arch/riscv/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index ce0cc737f870..1363e5bef35c 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -168,7 +168,7 @@ vdso_prepare: prepare0 endif endif -vdso-install-y += arch/riscv/kernel/vdso/vdso.so.dbg +vdso-install-$(CONFIG_MMU) += arch/riscv/kernel/vdso/vdso.so.dbg vdso-install-$(CONFIG_RISCV_USER_CFI) += arch/riscv/kernel/vdso_cfi/vdso-cfi.so.dbg vdso-install-$(CONFIG_COMPAT) += arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg -- cgit v1.2.3 From f11b48aa674b475f196bede7d69593c050107fc5 Mon Sep 17 00:00:00 2001 From: Simon Schippers Date: Tue, 28 Jul 2026 11:22:37 +0200 Subject: Revert "tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present" This reverts commit 1d6e569b7d0c0b2736636749e4be0a27f3cefcb3. The commit stops the netdev queue when the ptr_ring is full instead of dropping the packet. My own tests showed no relevant regression, but on Brett Sheffield's librecast testbed an IPv6 multicast testcase got slower. With 8 iperf3 TCP threads sending, the throughput dropped from 13.5 Gbit/s to 9.13 Gbit/s. Reported-by: Brett Sheffield Closes: https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/ Signed-off-by: Simon Schippers Acked-by: Michael S. Tsirkin Link: https://patch.msgid.link/20260728092240.250257-2-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski --- drivers/net/tun.c | 25 ++----------------------- 1 file changed, 2 insertions(+), 23 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index ffbe6f13fb1f..ec5573f545af 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1018,7 +1018,6 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev) struct netdev_queue *queue; struct tun_file *tfile; int len = skb->len; - int ret; rcu_read_lock(); tfile = rcu_dereference(tun->tfiles[txq]); @@ -1073,33 +1072,13 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev) nf_reset_ct(skb); - queue = netdev_get_tx_queue(dev, txq); - - spin_lock(&tfile->tx_ring.producer_lock); - ret = __ptr_ring_produce(&tfile->tx_ring, skb); - if (!qdisc_txq_has_no_queue(queue) && - __ptr_ring_check_produce(&tfile->tx_ring) == -ENOSPC) { - netif_tx_stop_queue(queue); - /* Paired with smp_mb() in __tun_wake_queue() */ - smp_mb__after_atomic(); - if (!__ptr_ring_check_produce(&tfile->tx_ring)) - netif_tx_wake_queue(queue); - } - spin_unlock(&tfile->tx_ring.producer_lock); - - if (ret) { - /* This should be a rare case if a qdisc is present, but - * can happen due to lltx. - * Since skb_tx_timestamp(), skb_orphan(), - * run_ebpf_filter() and pskb_trim() could have tinkered - * with the SKB, returning NETDEV_TX_BUSY is unsafe and - * we must drop instead. - */ + if (ptr_ring_produce(&tfile->tx_ring, skb)) { drop_reason = SKB_DROP_REASON_FULL_RING; goto drop; } /* dev->lltx requires to do our own update of trans_start */ + queue = netdev_get_tx_queue(dev, txq); txq_trans_cond_update(queue); /* Notify and wake up reader process */ -- cgit v1.2.3 From 6bc85579c3bbb2f088cbac849c5dc2a134dda736 Mon Sep 17 00:00:00 2001 From: Simon Schippers Date: Tue, 28 Jul 2026 11:22:38 +0200 Subject: Revert "ptr_ring: move free-space check into separate helper" This reverts commit fba362c17d9d9211fc51f272156bb84fc23bdf98. __ptr_ring_check_produce() has no users left after reverting commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"). Signed-off-by: Simon Schippers Acked-by: Michael S. Tsirkin Link: https://patch.msgid.link/20260728092240.250257-3-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski --- include/linux/ptr_ring.h | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) diff --git a/include/linux/ptr_ring.h b/include/linux/ptr_ring.h index c95e891903f0..d2c3629bbe45 100644 --- a/include/linux/ptr_ring.h +++ b/include/linux/ptr_ring.h @@ -96,20 +96,6 @@ static inline bool ptr_ring_full_bh(struct ptr_ring *r) return ret; } -/* Note: callers invoking this in a loop must use a compiler barrier, - * for example cpu_relax(). Callers must hold producer_lock. - */ -static inline int __ptr_ring_check_produce(struct ptr_ring *r) -{ - if (unlikely(!r->size)) - return -EINVAL; - - if (data_race(r->queue[r->producer])) - return -ENOSPC; - - return 0; -} - /* Note: callers invoking this in a loop must use a compiler barrier, * for example cpu_relax(). Callers must hold producer_lock. * Callers are responsible for making sure pointer that is being queued @@ -117,10 +103,8 @@ static inline int __ptr_ring_check_produce(struct ptr_ring *r) */ static inline int __ptr_ring_produce(struct ptr_ring *r, void *ptr) { - int p = __ptr_ring_check_produce(r); - - if (p) - return p; + if (unlikely(!r->size) || data_race(r->queue[r->producer])) + return -ENOSPC; /* Make sure the pointer we are storing points to a valid data. */ /* Pairs with the dependency ordering in __ptr_ring_consume. */ -- cgit v1.2.3 From 8f83be72d9f5ef16c4a908450d0d993e8ec99d34 Mon Sep 17 00:00:00 2001 From: Simon Schippers Date: Tue, 28 Jul 2026 11:22:39 +0200 Subject: Revert "vhost-net: wake queue of tun/tap after ptr_ring consume" This reverts commit baf808fe4fcd35767ab732b4ab2ea80dabfd97a6. There is no netdev queue left to wake after reverting commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"). Signed-off-by: Simon Schippers Acked-by: Michael S. Tsirkin Link: https://patch.msgid.link/20260728092240.250257-4-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski --- drivers/net/tun.c | 23 ----------------------- drivers/vhost/net.c | 21 ++++++--------------- include/linux/if_tun.h | 3 --- 3 files changed, 6 insertions(+), 41 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index ec5573f545af..39abc3078097 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -3787,29 +3787,6 @@ struct ptr_ring *tun_get_tx_ring(struct file *file) } EXPORT_SYMBOL_GPL(tun_get_tx_ring); -/* Callers must hold ring.consumer_lock */ -void tun_wake_queue(struct file *file, int consumed) -{ - struct tun_file *tfile; - struct tun_struct *tun; - - if (file->f_op != &tun_fops) - return; - - tfile = file->private_data; - if (!tfile) - return; - - rcu_read_lock(); - - tun = rcu_dereference(tfile->tun); - if (tun) - __tun_wake_queue(tun, tfile, consumed); - - rcu_read_unlock(); -} -EXPORT_SYMBOL_GPL(tun_wake_queue); - module_init(tun_init); module_exit(tun_cleanup); MODULE_DESCRIPTION(DRV_DESCRIPTION); diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 3e72b9c6af0c..6949b704166d 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -176,21 +176,13 @@ static void *vhost_net_buf_consume(struct vhost_net_buf *rxq) return ret; } -static int vhost_net_buf_produce(struct sock *sk, - struct vhost_net_virtqueue *nvq) +static int vhost_net_buf_produce(struct vhost_net_virtqueue *nvq) { - struct file *file = sk->sk_socket->file; struct vhost_net_buf *rxq = &nvq->rxq; rxq->head = 0; - spin_lock(&nvq->rx_ring->consumer_lock); - rxq->tail = __ptr_ring_consume_batched(nvq->rx_ring, rxq->queue, - VHOST_NET_BATCH); - - if (rxq->tail) - tun_wake_queue(file, rxq->tail); - - spin_unlock(&nvq->rx_ring->consumer_lock); + rxq->tail = ptr_ring_consume_batched(nvq->rx_ring, rxq->queue, + VHOST_NET_BATCH); return rxq->tail; } @@ -217,15 +209,14 @@ static int vhost_net_buf_peek_len(void *ptr) return __skb_array_len_with_tag(ptr); } -static int vhost_net_buf_peek(struct sock *sk, - struct vhost_net_virtqueue *nvq) +static int vhost_net_buf_peek(struct vhost_net_virtqueue *nvq) { struct vhost_net_buf *rxq = &nvq->rxq; if (!vhost_net_buf_is_empty(rxq)) goto out; - if (!vhost_net_buf_produce(sk, nvq)) + if (!vhost_net_buf_produce(nvq)) return 0; out: @@ -1013,7 +1004,7 @@ static int peek_head_len(struct vhost_net_virtqueue *rvq, struct sock *sk) unsigned long flags; if (rvq->rx_ring) - return vhost_net_buf_peek(sk, rvq); + return vhost_net_buf_peek(rvq); spin_lock_irqsave(&sk->sk_receive_queue.lock, flags); head = skb_peek(&sk->sk_receive_queue); diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 5f3e206c7a73..80166eb62f41 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -22,7 +22,6 @@ struct tun_msg_ctl { #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE) struct socket *tun_get_socket(struct file *); struct ptr_ring *tun_get_tx_ring(struct file *file); -void tun_wake_queue(struct file *file, int consumed); static inline bool tun_is_xdp_frame(void *ptr) { @@ -56,8 +55,6 @@ static inline struct ptr_ring *tun_get_tx_ring(struct file *f) return ERR_PTR(-EINVAL); } -static inline void tun_wake_queue(struct file *f, int consumed) {} - static inline bool tun_is_xdp_frame(void *ptr) { return false; -- cgit v1.2.3 From c3da92af07eaba43f49910b2e4fbd016e563fa35 Mon Sep 17 00:00:00 2001 From: Simon Schippers Date: Tue, 28 Jul 2026 11:22:40 +0200 Subject: Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup" This reverts commit d4c22d70d7253dd727c71484c58d504f6c630343. There is no netdev queue left to wake after reverting commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"). Signed-off-by: Simon Schippers Acked-by: Michael S. Tsirkin Link: https://patch.msgid.link/20260728092240.250257-5-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski --- drivers/net/tun.c | 61 ++++--------------------------------------------------- 1 file changed, 4 insertions(+), 57 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 39abc3078097..fed9dfdfcc3b 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -145,8 +145,6 @@ struct tun_file { struct list_head next; struct tun_struct *detached; struct ptr_ring tx_ring; - /* Protected by tx_ring.consumer_lock */ - int cons_cnt; struct xdp_rxq_info xdp_rxq; }; @@ -590,13 +588,8 @@ static void __tun_detach(struct tun_file *tfile, bool clean) rcu_assign_pointer(tun->tfiles[index], tun->tfiles[tun->numqueues - 1]); ntfile = rtnl_dereference(tun->tfiles[index]); - spin_lock(&ntfile->tx_ring.consumer_lock); ntfile->queue_index = index; ntfile->xdp_rxq.queue_index = index; - ntfile->cons_cnt = 0; - if (__ptr_ring_empty(&ntfile->tx_ring)) - netif_wake_subqueue(tun->dev, index); - spin_unlock(&ntfile->tx_ring.consumer_lock); rcu_assign_pointer(tun->tfiles[tun->numqueues - 1], NULL); @@ -737,9 +730,6 @@ static int tun_attach(struct tun_struct *tun, struct file *file, goto out; } - spin_lock(&tfile->tx_ring.consumer_lock); - tfile->cons_cnt = 0; - spin_unlock(&tfile->tx_ring.consumer_lock); tfile->queue_index = tun->numqueues; tfile->socket.sk->sk_shutdown &= ~RCV_SHUTDOWN; @@ -2126,46 +2116,13 @@ done: return total; } -/* Callers must hold ring.consumer_lock */ -static void __tun_wake_queue(struct tun_struct *tun, - struct tun_file *tfile, int consumed) -{ - struct netdev_queue *txq = netdev_get_tx_queue(tun->dev, - tfile->queue_index); - - /* Paired with smp_mb__after_atomic() in tun_net_xmit() */ - smp_mb(); - if (netif_tx_queue_stopped(txq)) { - tfile->cons_cnt += consumed; - if (tfile->cons_cnt >= tfile->tx_ring.size / 2 || - __ptr_ring_empty(&tfile->tx_ring)) { - netif_tx_wake_queue(txq); - tfile->cons_cnt = 0; - } - } -} - -static void *tun_ring_consume(struct tun_struct *tun, struct tun_file *tfile) -{ - void *ptr; - - spin_lock(&tfile->tx_ring.consumer_lock); - ptr = __ptr_ring_consume(&tfile->tx_ring); - if (ptr) - __tun_wake_queue(tun, tfile, 1); - - spin_unlock(&tfile->tx_ring.consumer_lock); - return ptr; -} - -static void *tun_ring_recv(struct tun_struct *tun, struct tun_file *tfile, - int noblock, int *err) +static void *tun_ring_recv(struct tun_file *tfile, int noblock, int *err) { DECLARE_WAITQUEUE(wait, current); void *ptr = NULL; int error = 0; - ptr = tun_ring_consume(tun, tfile); + ptr = ptr_ring_consume(&tfile->tx_ring); if (ptr) goto out; if (noblock) { @@ -2177,7 +2134,7 @@ static void *tun_ring_recv(struct tun_struct *tun, struct tun_file *tfile, while (1) { set_current_state(TASK_INTERRUPTIBLE); - ptr = tun_ring_consume(tun, tfile); + ptr = ptr_ring_consume(&tfile->tx_ring); if (ptr) break; if (signal_pending(current)) { @@ -2214,7 +2171,7 @@ static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile, if (!ptr) { /* Read frames from ring */ - ptr = tun_ring_recv(tun, tfile, noblock, &err); + ptr = tun_ring_recv(tfile, noblock, &err); if (!ptr) return err; } @@ -3669,16 +3626,6 @@ static int tun_queue_resize(struct tun_struct *tun) dev->tx_queue_len, GFP_KERNEL, tun_ptr_free); - if (!ret) { - for (i = 0; i < tun->numqueues; i++) { - tfile = rtnl_dereference(tun->tfiles[i]); - spin_lock(&tfile->tx_ring.consumer_lock); - netif_wake_subqueue(tun->dev, tfile->queue_index); - tfile->cons_cnt = 0; - spin_unlock(&tfile->tx_ring.consumer_lock); - } - } - kfree(rings); return ret; } -- cgit v1.2.3 From b4ce102b2cd88424c5860fbbb20b9eb343a93bf4 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Tue, 28 Jul 2026 05:52:14 +0100 Subject: net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend bus->read() returns a negative errno on failure, but mt7530_regmap_read() assigns it to a u16, truncating e.g. -ETIMEDOUT into 0xff92, and returns success. The garbage word is then consumed as register data, and read-modify-write cycles write it back to the switch. Check both reads and propagate their errors. The same defect existed in mt7530_mii_read() since the driver was introduced and moved into the regmap backend unchanged. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/3c628e48276c2e5522c8795a6be60d11c7a76a7d.1785213071.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mt7530-mdio.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c index 11ea924a9f35..784dd58a7158 100644 --- a/drivers/net/dsa/mt7530-mdio.c +++ b/drivers/net/dsa/mt7530-mdio.c @@ -55,8 +55,15 @@ mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val) if (ret < 0) return ret; - lo = bus->read(bus, priv->mdiodev->addr, r); - hi = bus->read(bus, priv->mdiodev->addr, 0x10); + ret = bus->read(bus, priv->mdiodev->addr, r); + if (ret < 0) + return ret; + lo = ret; + + ret = bus->read(bus, priv->mdiodev->addr, 0x10); + if (ret < 0) + return ret; + hi = ret; *val = (hi << 16) | (lo & 0xffff); -- cgit v1.2.3 From ed9adac35b8fac635f40e28461505e2e5b6c8fcc Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Tue, 28 Jul 2026 05:52:21 +0100 Subject: net: dsa: mt7530: error out on failed reads in ATC/VTCR command polling mt7530_fdb_cmd() and mt7530_vlan_cmd() poll the command register through a helper which returns 0 when the underlying read fails. A failed bus transaction thus clears ATC_BUSY/VTCR_BUSY and is treated as successful command completion, and the subsequent ATC_INVALID and VTCR_INVALID checks are defeated the same way. Poll using regmap_read_poll_timeout(), which stops on read errors and propagates them, and check the completion status read as well. Take the MDIO bus lock across the sequence as the switch regmap is set up with locking disabled. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/eea1d8f15c54375b3770c23e09fb3217df487169.1785213071.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mt7530.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 3c2a3029b10c..292cde961f1a 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -248,15 +248,20 @@ mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp) { u32 val; int ret; - struct mt7530_dummy_poll p; /* Set the command operating upon the MAC address entries */ val = ATC_BUSY | ATC_MAT(0) | cmd; mt7530_write(priv, MT7530_ATC, val); - INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC); - ret = readx_poll_timeout(_mt7530_read, &p, val, - !(val & ATC_BUSY), 20, 20000); + mt7530_mutex_lock(priv); + + ret = regmap_read_poll_timeout(priv->regmap, MT7530_ATC, val, + !(val & ATC_BUSY), 20, 20000); + if (!ret) + ret = regmap_read(priv->regmap, MT7530_ATC, &val); + + mt7530_mutex_unlock(priv); + if (ret < 0) { dev_err(priv->dev, "reset timeout\n"); return ret; @@ -265,7 +270,6 @@ mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp) /* Additional sanity for read command if the specified * entry is invalid */ - val = mt7530_read(priv, MT7530_ATC); if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID)) return -EINVAL; @@ -1626,22 +1630,26 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port, static int mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid) { - struct mt7530_dummy_poll p; u32 val; int ret; val = VTCR_BUSY | VTCR_FUNC(cmd) | vid; mt7530_write(priv, MT7530_VTCR, val); - INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR); - ret = readx_poll_timeout(_mt7530_read, &p, val, - !(val & VTCR_BUSY), 20, 20000); + mt7530_mutex_lock(priv); + + ret = regmap_read_poll_timeout(priv->regmap, MT7530_VTCR, val, + !(val & VTCR_BUSY), 20, 20000); + if (!ret) + ret = regmap_read(priv->regmap, MT7530_VTCR, &val); + + mt7530_mutex_unlock(priv); + if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); return ret; } - val = mt7530_read(priv, MT7530_VTCR); if (val & VTCR_INVALID) { dev_err(priv->dev, "read VTCR invalid\n"); return -EINVAL; -- cgit v1.2.3 From 77a9ebe8818cf6dd1699bd6728cb5d66307801d7 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Tue, 28 Jul 2026 05:52:29 +0100 Subject: net: dsa: mt7530: error out on failed reads in MT7531 PHY polling The MT7531 indirect PHY access functions poll MT7531_PHY_IAC through a helper which returns 0 when the underlying read fails, so a failed bus transaction clears MT7531_PHY_ACS_ST and the access carries on, returning garbage PHY register data to phylib. Poll using regmap_read_poll_timeout(), which stops on read errors and propagates them. These functions hold the MDIO bus lock across the whole sequence, so the unlocked regmap accesses remain correct. Remove the now-unused _mt7530_unlocked_read(). Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/79e85d68d210cc37342978171aa6432aa2954333.1785213071.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mt7530.c | 58 +++++++++++++++++------------------------------- 1 file changed, 20 insertions(+), 38 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 292cde961f1a..aa33d94e11b5 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -191,12 +191,6 @@ mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val) mt7530_mutex_unlock(priv); } -static u32 -_mt7530_unlocked_read(struct mt7530_dummy_poll *p) -{ - return mt7530_mii_read(p->priv, p->reg); -} - static u32 _mt7530_read(struct mt7530_dummy_poll *p) { @@ -553,16 +547,13 @@ static int mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, int regnum) { - struct mt7530_dummy_poll p; u32 reg, val; int ret; - INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); - mt7530_mutex_lock(priv); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, - !(val & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; @@ -572,8 +563,8 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, MT7531_MDIO_DEV_ADDR(devad) | regnum; mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, - !(val & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; @@ -583,8 +574,8 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, MT7531_MDIO_DEV_ADDR(devad); mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, - !(val & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; @@ -601,16 +592,13 @@ static int mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, int regnum, u16 data) { - struct mt7530_dummy_poll p; u32 val, reg; int ret; - INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); - mt7530_mutex_lock(priv); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, - !(val & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; @@ -620,8 +608,8 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, MT7531_MDIO_DEV_ADDR(devad) | regnum; mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, - !(val & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; @@ -631,8 +619,8 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, MT7531_MDIO_DEV_ADDR(devad) | data; mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, - !(val & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; @@ -647,16 +635,13 @@ out: static int mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum) { - struct mt7530_dummy_poll p; int ret; u32 val; - INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); - mt7530_mutex_lock(priv); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, - !(val & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; @@ -667,8 +652,8 @@ mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum) mt7530_mii_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, - !(val & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; @@ -685,16 +670,13 @@ static int mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum, u16 data) { - struct mt7530_dummy_poll p; int ret; u32 reg; - INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); - mt7530_mutex_lock(priv); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, - !(reg & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, reg, + !(reg & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; @@ -705,8 +687,8 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum, mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); - ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, - !(reg & MT7531_PHY_ACS_ST), 20, 100000); + ret = regmap_read_poll_timeout(priv->regmap, MT7531_PHY_IAC, reg, + !(reg & MT7531_PHY_ACS_ST), 20, 100000); if (ret < 0) { dev_err(priv->dev, "poll timeout\n"); goto out; -- cgit v1.2.3 From b041ed62aa6e3b2d7d36127e0e5d7bf2701f8231 Mon Sep 17 00:00:00 2001 From: Nazim Amirul Date: Mon, 27 Jul 2026 23:09:04 -0700 Subject: net: stmmac: Fix E2E delay mechanism For E2E delay mechanism, "received DELAY_REQ without timestamp" error messages show up for dwmac v3.70+ and dwxgmac IPs. This issue affects socfpga platforms, Agilex7 (dwmac 3.70) and Agilex5 (dwxgmac). According to the databook, to enable timestamping for all events, the SNAPTYPSEL bits in the MAC_Timestamp_Control register must be set to 2'b01, and the TSEVNTENA bit must be cleared to 0'b0. Commit 3cb958027cb8 ("net: stmmac: Fix E2E delay mechanism") already addresses this problem for all dwmacs above version v4.10. However, same holds true for v3.70 and above, as well as for dwxgmac. Updates the check accordingly. Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Fixes: 3cb958027cb8 ("net: stmmac: Fix E2E delay mechanism") Reviewed-by: Maxime Chevallier Signed-off-by: Rohan G Thomas Signed-off-by: Nazim Amirul Link: https://patch.msgid.link/20260728060904.31993-1-muhammad.nazim.amirul.nazle.asmade@altera.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 151c77713025..3801f9d45278 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -755,7 +755,8 @@ static int stmmac_hwtstamp_set(struct net_device *dev, config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; ptp_v2 = PTP_TCR_TSVER2ENA; snap_type_sel = PTP_TCR_SNAPTYPSEL_1; - if (priv->synopsys_id < DWMAC_CORE_4_10) + if (priv->synopsys_id < DWMAC_CORE_3_70 && + priv->plat->core_type != DWMAC_CORE_XGMAC) ts_event_en = PTP_TCR_TSEVNTENA; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; -- cgit v1.2.3 From e1cf066244dad576221b7123a0e5005967f25a20 Mon Sep 17 00:00:00 2001 From: Ilya Maximets Date: Mon, 27 Jul 2026 20:18:30 +0200 Subject: net: openvswitch: fix skb leak on flow key update failure during recirculation do_execute_actions() returns right away when execute_recirc() fails on the last action as it assumes this function always takes ownership of the skb when 'last' is true. But when the flow key update fails, the function doesn't free the skb and it ends up leaked. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. Fixes: 971427f353f3 ("openvswitch: Add recirc and hash action.") Cc: stable@vger.kernel.org Signed-off-by: Ilya Maximets Reviewed-by: Aaron Conole Link: https://patch.msgid.link/20260727181851.306076-2-i.maximets@ovn.org Signed-off-by: Jakub Kicinski --- net/openvswitch/actions.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index 513fca6a8e8a..0118fe3b35e4 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -1108,6 +1108,10 @@ static int execute_masked_set_action(struct sk_buff *skb, return err; } +/* When 'last' is true, recirc() should always consume the 'skb'. + * Otherwise, recirc() should keep 'skb' intact regardless what + * actions are executed on recirculation. + */ static int execute_recirc(struct datapath *dp, struct sk_buff *skb, struct sw_flow_key *key, const struct nlattr *a, bool last) @@ -1118,8 +1122,12 @@ static int execute_recirc(struct datapath *dp, struct sk_buff *skb, int err; err = ovs_flow_key_update(skb, key); - if (err) + if (err) { + if (last) + ovs_kfree_skb_reason(skb, + OVS_DROP_ACTION_ERROR); return err; + } } BUG_ON(!is_flow_key_valid(key)); -- cgit v1.2.3 From bc62e843bc48f933da765ce47079fd992e535794 Mon Sep 17 00:00:00 2001 From: Ilya Maximets Date: Mon, 27 Jul 2026 20:18:31 +0200 Subject: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. Fixes: ec0d043d05e6 ("openvswitch: Ensure flow is valid before executing ct") Cc: stable@vger.kernel.org Signed-off-by: Ilya Maximets Reviewed-by: Aaron Conole Link: https://patch.msgid.link/20260727181851.306076-3-i.maximets@ovn.org Signed-off-by: Jakub Kicinski --- net/openvswitch/actions.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index 0118fe3b35e4..dc5ff859f114 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -1380,7 +1380,7 @@ static int do_execute_actions(struct datapath *dp, struct sk_buff *skb, if (!is_flow_key_valid(key)) { err = ovs_flow_key_update(skb, key); if (err) - return err; + break; } err = ovs_ct_execute(ovs_dp_get_net(dp), skb, key, -- cgit v1.2.3 From e67cc80b50f587cd1d8ffc8989dcec3291720bc3 Mon Sep 17 00:00:00 2001 From: Aditya Garg Date: Mon, 27 Jul 2026 04:37:59 -0700 Subject: net: mana: Return error code from mana_create_rxq() mana_create_rxq() returns a struct mana_rxq pointer and returns NULL on any failure. The caller, mana_add_rx_queues(), cannot tell what went wrong and hardcodes the error as -ENOMEM. As a result the actual failure reported by the lower layers (for example -EPROTO from a failed HW request) is masked and every RX queue creation failure looks like an out-of-memory error. Return an ERR_PTR() encoded error code from mana_create_rxq() on failure instead of NULL. The caller now propagates the returned error code directly instead of substituting -ENOMEM. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Aditya Garg Reviewed-by: Joe Damato Link: https://patch.msgid.link/20260727113759.2881500-1-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/microsoft/mana/mana_en.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c index 9d9bfd116dab..92bb55935c1c 100644 --- a/drivers/net/ethernet/microsoft/mana/mana_en.c +++ b/drivers/net/ethernet/microsoft/mana/mana_en.c @@ -2829,7 +2829,7 @@ static struct mana_rxq *mana_create_rxq(struct mana_port_context *apc, rxq = kvzalloc_flex(*rxq, rx_oobs, apc->rx_queue_size); if (!rxq) - return NULL; + return ERR_PTR(-ENOMEM); rxq->ndev = ndev; rxq->num_rx_buf = apc->rx_queue_size; @@ -2930,7 +2930,7 @@ out: mana_destroy_rxq(apc, rxq, false); - return NULL; + return ERR_PTR(err); } static void mana_create_rxq_debugfs(struct mana_port_context *apc, int idx) @@ -2964,8 +2964,8 @@ static int mana_add_rx_queues(struct mana_port_context *apc, for (i = 0; i < apc->num_queues; i++) { rxq = mana_create_rxq(apc, i, &apc->eqs[i], ndev); - if (!rxq) { - err = -ENOMEM; + if (IS_ERR(rxq)) { + err = PTR_ERR(rxq); netdev_err(ndev, "Failed to create rxq %d : %d\n", i, err); goto out; } -- cgit v1.2.3 From 54ad7ea45d63146a8e3c57375f8a269d4cf7ecea Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Mon, 27 Jul 2026 14:03:48 +0800 Subject: ptp: netc: fix potential interrupt storm caused by incorrect unbind order In netc_timer_remove(), hardware interrupts are disabled by clearing TMR_TEMASK before ptp_clock_unregister() is called. This may cause a race condition during driver unbind that could leave hardware interrupts active. For example, a concurrent PTP_CLK_REQ_EXTTS ioctl can re-enable TMR_TEMASK after it has been cleared, leaving a pending hardware interrupt when the driver unbinds. Since the NETC Timer does not support PCIe FLR, hardware state is not reset during probe. When the driver is rebound and the IRQ is registered, the pending interrupt fires immediately. At that point priv->tmr_emask is still zero, so netc_timer_isr() does not clear the interrupt status and unconditionally returns IRQ_HANDLED, resulting in an uninterruptible infinite interrupt storm. Fix this in several ways. First, request the IRQ with IRQF_NO_AUTOEN so it is not enabled when request_irq() runs, and clear TMR_TEMASK in netc_timer_init() before enabling it. The IRQ is only enabled at the end of probe once the timer has been reprogrammed and the PTP clock has been registered. This ensures a stale pending interrupt from a previous unbind or an unclean shutdown cannot be delivered before the driver is fully initialized. Second, in netc_timer_remove() call disable_irq() before ptp_clock_unregister() and move the TMR_TEMASK/TMR_CTRL clearing after it. disable_irq() masks the line and waits for any in-flight netc_timer_isr() to finish, so no ISR can dereference priv->clock after ptp_clock_unregister() has freed it. Unregistering the PTP clock before clearing the mask also guarantees that no in-flight or concurrent ioctl can re-enable hardware interrupts. Finally, return IRQ_NONE from netc_timer_isr() when the masked event status is zero, so the kernel's spurious interrupt detection can disable a stuck line instead of looping forever. Fixes: 671e266835b8 ("ptp: netc: add periodic pulse output support") Reported-by: Sashiko Closes: https://sashiko.dev/#/patchset/20260720012508.23227-1-wei.fang%40oss.nxp.com Signed-off-by: Wei Fang Link: https://patch.msgid.link/20260727060348.1887464-1-wei.fang@oss.nxp.com Signed-off-by: Jakub Kicinski --- drivers/ptp/ptp_netc.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/ptp/ptp_netc.c b/drivers/ptp/ptp_netc.c index 5e381c354d74..1c20d7efab92 100644 --- a/drivers/ptp/ptp_netc.c +++ b/drivers/ptp/ptp_netc.c @@ -769,6 +769,7 @@ static void netc_timer_init(struct netc_timer *priv) TMR_CTRL_TE | TMR_CTRL_FS; netc_timer_wr(priv, NETC_TMR_CTRL, tmr_ctrl); netc_timer_wr(priv, NETC_TMR_PRSC, priv->oclk_prsc); + netc_timer_wr(priv, NETC_TMR_TEMASK, 0); /* Disable FIPER by default */ fiper_ctrl = netc_timer_rd(priv, NETC_TMR_FIPER_CTRL); @@ -901,6 +902,11 @@ static irqreturn_t netc_timer_isr(int irq, void *data) /* Clear interrupts status */ netc_timer_wr(priv, NETC_TMR_TEVENT, tmr_event); + if (!tmr_event) { + spin_unlock(&priv->lock); + return IRQ_NONE; + } + if (tmr_event & TMR_TEVENT_ALMEN(0)) netc_timer_alarm_write(priv, NETC_TMR_DEFAULT_ALARM, 0); @@ -936,7 +942,8 @@ static int netc_timer_init_msix_irq(struct netc_timer *priv) } priv->irq = pci_irq_vector(pdev, 0); - err = request_irq(priv->irq, netc_timer_isr, 0, priv->irq_name, priv); + err = request_irq(priv->irq, netc_timer_isr, IRQF_NO_AUTOEN, + priv->irq_name, priv); if (err) { dev_err(&pdev->dev, "request_irq() failed\n"); pci_free_irq_vectors(pdev); @@ -951,7 +958,6 @@ static void netc_timer_free_msix_irq(struct netc_timer *priv) { struct pci_dev *pdev = priv->pdev; - disable_irq(priv->irq); free_irq(priv->irq, priv); pci_free_irq_vectors(pdev); } @@ -1005,6 +1011,8 @@ static int netc_timer_probe(struct pci_dev *pdev, goto free_msix_irq; } + enable_irq(priv->irq); + return 0; free_msix_irq: @@ -1019,9 +1027,10 @@ static void netc_timer_remove(struct pci_dev *pdev) { struct netc_timer *priv = pci_get_drvdata(pdev); + disable_irq(priv->irq); + ptp_clock_unregister(priv->clock); netc_timer_wr(priv, NETC_TMR_TEMASK, 0); netc_timer_wr(priv, NETC_TMR_CTRL, 0); - ptp_clock_unregister(priv->clock); netc_timer_free_msix_irq(priv); netc_timer_pci_remove(pdev); } -- cgit v1.2.3 From 70fd0cf29bc47882c1cb11ad4fb2881ac2c1e640 Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Sun, 26 Jul 2026 22:56:08 -0300 Subject: net: dsa: realtek: rtl8365mb: use devm_mutex_init for mib_lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called before the lock is discarded. Use devm_mutex_init() instead so the cleanup is handled automatically. Fixes: 4af2950c50c86 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC") Reviewed-by: Mieczyslaw Nalewaj Signed-off-by: Luiz Angelo Daros de Luca Reviewed-by: Linus Walleij Reviewed-by: Alvin Šipraga Link: https://patch.msgid.link/20260726-realtek_mutext-v2-1-5d62ba998791@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/realtek/rtl8365mb_main.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/realtek/rtl8365mb_main.c b/drivers/net/dsa/realtek/rtl8365mb_main.c index 5ac091bf93c9..aa05375b090a 100644 --- a/drivers/net/dsa/realtek/rtl8365mb_main.c +++ b/drivers/net/dsa/realtek/rtl8365mb_main.c @@ -1988,16 +1988,19 @@ static void rtl8365mb_get_stats64(struct dsa_switch *ds, int port, spin_unlock(&p->stats_lock); } -static void rtl8365mb_stats_setup(struct realtek_priv *priv) +static int rtl8365mb_stats_setup(struct realtek_priv *priv) { struct rtl8365mb *mb = priv->chip_data; struct dsa_switch *ds = &priv->ds; struct dsa_port *dp; + int ret; /* Per-chip global mutex to protect MIB counter access, since doing * so requires accessing a series of registers in a particular order. */ - mutex_init(&mb->mib_lock); + ret = devm_mutex_init(priv->dev, &mb->mib_lock); + if (ret) + return ret; dsa_switch_for_each_available_port(dp, ds) { struct rtl8365mb_port *p = &mb->ports[dp->index]; @@ -2010,6 +2013,8 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv) */ INIT_DELAYED_WORK(&p->mib_work, rtl8365mb_stats_poll); } + + return 0; } static void rtl8365mb_stats_teardown(struct realtek_priv *priv) @@ -2567,7 +2572,12 @@ static int rtl8365mb_setup(struct dsa_switch *ds) } /* Start statistics counter polling */ - rtl8365mb_stats_setup(priv); + ret = rtl8365mb_stats_setup(priv); + if (ret) { + dev_err(priv->dev, "failed to setup stats: %pe\n", + ERR_PTR(ret)); + goto out_teardown_irq; + } return 0; -- cgit v1.2.3 From 050e07f8765d84b4e74fae239ff7a9f29eb6869c Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Sun, 26 Jul 2026 22:56:09 -0300 Subject: net: dsa: realtek: use devm_mutex_init for regmap lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called before the lock is discarded. Use devm_mutex_init() instead so the cleanup is handled automatically. Fixes: 907e772f6f6de ("net: dsa: realtek: allow subdrivers to externally lock regmap") Reviewed-by: Mieczyslaw Nalewaj Signed-off-by: Luiz Angelo Daros de Luca Reviewed-by: Linus Walleij Reviewed-by: Alvin Šipraga Link: https://patch.msgid.link/20260726-realtek_mutext-v2-2-5d62ba998791@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/realtek/rtl83xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c index 71124ecca92f..9402bfe4f85a 100644 --- a/drivers/net/dsa/realtek/rtl83xx.c +++ b/drivers/net/dsa/realtek/rtl83xx.c @@ -156,7 +156,10 @@ rtl83xx_probe(struct device *dev, if (!priv) return ERR_PTR(-ENOMEM); - mutex_init(&priv->map_lock); + ret = devm_mutex_init(dev, &priv->map_lock); + if (ret) + return ERR_PTR(ret); + mutex_init(&priv->vlan_lock); mutex_init(&priv->l2_lock); -- cgit v1.2.3 From a95f3e9b8985fc0e21bfcf727e941c1f03476927 Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Sun, 26 Jul 2026 22:56:10 -0300 Subject: net: dsa: realtek: use devm_mutex_init for vlan_lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called before the lock is discarded. Use devm_mutex_init() instead so the cleanup is handled automatically. Fixes: 9da2c8672f771 ("net: dsa: realtek: rtl8365mb: add VLAN support") Reviewed-by: Mieczyslaw Nalewaj Signed-off-by: Luiz Angelo Daros de Luca Reviewed-by: Linus Walleij Reviewed-by: Alvin Šipraga Link: https://patch.msgid.link/20260726-realtek_mutext-v2-3-5d62ba998791@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/realtek/rtl83xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c index 9402bfe4f85a..9f40afb19ab2 100644 --- a/drivers/net/dsa/realtek/rtl83xx.c +++ b/drivers/net/dsa/realtek/rtl83xx.c @@ -160,7 +160,10 @@ rtl83xx_probe(struct device *dev, if (ret) return ERR_PTR(ret); - mutex_init(&priv->vlan_lock); + ret = devm_mutex_init(dev, &priv->vlan_lock); + if (ret) + return ERR_PTR(ret); + mutex_init(&priv->l2_lock); rc.lock_arg = priv; -- cgit v1.2.3 From 442ecdc83d00d6c2312541c4e0ada47e02805fcb Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Sun, 26 Jul 2026 22:56:11 -0300 Subject: net: dsa: realtek: use devm_mutex_init for l2_lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called before the lock is discarded. Use devm_mutex_init() instead so the cleanup is handled automatically. Fixes: 336e3e4a1ab37 ("net: dsa: realtek: rtl8365mb: add FDB support") Reviewed-by: Mieczyslaw Nalewaj Signed-off-by: Luiz Angelo Daros de Luca Reviewed-by: Linus Walleij Reviewed-by: Alvin Šipraga Link: https://patch.msgid.link/20260726-realtek_mutext-v2-4-5d62ba998791@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/realtek/rtl83xx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c index 9f40afb19ab2..9dd50b20c000 100644 --- a/drivers/net/dsa/realtek/rtl83xx.c +++ b/drivers/net/dsa/realtek/rtl83xx.c @@ -164,7 +164,9 @@ rtl83xx_probe(struct device *dev, if (ret) return ERR_PTR(ret); - mutex_init(&priv->l2_lock); + ret = devm_mutex_init(dev, &priv->l2_lock); + if (ret) + return ERR_PTR(ret); rc.lock_arg = priv; priv->map = devm_regmap_init(dev, NULL, priv, &rc); -- cgit v1.2.3 From 732ed8f75ce583d115716f668dc80d730f3ad610 Mon Sep 17 00:00:00 2001 From: Jiawen Wu Date: Fri, 24 Jul 2026 15:46:57 +0800 Subject: net: libwx: fix FDIR ATR queue mismatch for software VLAN packets When TX VLAN hardware offload is disabled, VLAN tags are embedded in the packet payload (software VLAN). Previously, the driver failed to set the WX_TX_FLAGS_SW_VLAN flag for these packets during transmission. This missing flag caused the txgbe FDIR ATR logic to fall through to the default hash calculation path. This resulted in asymmetric hash values for Tx and Rx flows, preventing return packets from being steered to the same queue as the transmit packets. Fix this by detecting software VLANs via eth_type_vlan(skb->protocol) and setting WX_TX_FLAGS_SW_VLAN. This ensures the ATR feature selects the correct hashing algorithm to maintain Tx/Rx queue symmetry. Fixes: b501d261a5b3 ("net: txgbe: add FDIR ATR support") Signed-off-by: Jiawen Wu Reviewed-by: Simon Horman Link: https://patch.msgid.link/0879DA38A8E32701+20260724074657.10773-1-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/wangxun/libwx/wx_lib.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c index 814d88d2aee4..5d99e870de5e 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c @@ -1606,6 +1606,8 @@ static netdev_tx_t wx_xmit_frame_ring(struct sk_buff *skb, if (skb_vlan_tag_present(skb)) { tx_flags |= skb_vlan_tag_get(skb) << WX_TX_FLAGS_VLAN_SHIFT; tx_flags |= WX_TX_FLAGS_HW_VLAN; + } else if (eth_type_vlan(skb->protocol)) { + tx_flags |= WX_TX_FLAGS_SW_VLAN; } if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && -- cgit v1.2.3 From 16809472409d998afcda402e32b8229b389337c4 Mon Sep 17 00:00:00 2001 From: Suman Ghosh Date: Fri, 24 Jul 2026 12:58:31 +0530 Subject: octeontx2-pf: Set correct sequence for carrier off and tx queue stop During link down event, we were doing netif_tx_stop_all_queues() first and then netif_carrier_off(). This can cause a potential race since carrier is still on during down event. This patch reverse the calling order to fix the issue. Fixes: 50fe6c02e5ad ("octeontx2-pf: Register and handle link notifications") Signed-off-by: Suman Ghosh Signed-off-by: Ratheesh Kannoth Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260724072831.2415281-1-rkannoth@marvell.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 2e33b33ec993..c995f2900859 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -889,8 +889,8 @@ static void otx2_handle_link_event(struct otx2_nic *pf) netif_carrier_on(netdev); netif_tx_start_all_queues(netdev); } else { - netif_tx_stop_all_queues(netdev); netif_carrier_off(netdev); + netif_tx_stop_all_queues(netdev); } } -- cgit v1.2.3 From 1842bf97af109f5ebf830175c9725bf81ebb78b1 Mon Sep 17 00:00:00 2001 From: Gabriele Monaco Date: Fri, 22 May 2026 14:58:33 +0200 Subject: sched/deadline: Use revised wakeup rule only for running dl_server Commit 14a857056466 ("sched/deadline: Use revised wakeup rule for dl_server") applies the revised wakeup rule to any server, as a result servers that are not running (dl_defer_running == 0) and start with a deadline overflow get enqueued and can boost tasks as if they were running, invalidating the defer rule and the documented state model. Apply the revised wakeup rule only for deferrable servers that are marked as running. Fixes: 14a857056466 ("sched/deadline: Use revised wakeup rule for dl_server") Signed-off-by: Gabriele Monaco Signed-off-by: Peter Zijlstra (Intel) Acked-by: Juri Lelli Tested-by: Andrea Righi Link: https://patch.msgid.link/20260522125833.264145-1-gmonaco@redhat.com --- kernel/sched/deadline.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c index 0f858b98c9aa..200300043fa5 100644 --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -1017,7 +1017,8 @@ static void update_dl_entity(struct sched_dl_entity *dl_se) if (dl_time_before(dl_se->deadline, rq_clock(rq)) || dl_entity_overflow(dl_se, rq_clock(rq))) { - if (unlikely((!dl_is_implicit(dl_se) || dl_se->dl_defer) && + if (unlikely((!dl_is_implicit(dl_se) || + (dl_se->dl_defer && dl_se->dl_defer_running)) && !dl_time_before(dl_se->deadline, rq_clock(rq)) && !is_dl_boosted(dl_se))) { update_dl_revised_wakeup(dl_se, rq); -- cgit v1.2.3 From a58a2b0ce354df531ebc71fc870058c2feb59f6b Mon Sep 17 00:00:00 2001 From: Ilya Maximets Date: Mon, 27 Jul 2026 14:10:21 +0200 Subject: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ... netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the "hash" value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. Fixes: c7c4c44c9a95 ("net: openvswitch: expand the meters supported number") Cc: stable@vger.kernel.org Signed-off-by: Ilya Maximets Reviewed-by: Eelco Chaudron Link: https://patch.msgid.link/20260727121022.198461-1-i.maximets@ovn.org Signed-off-by: Paolo Abeni --- net/openvswitch/meter.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) diff --git a/net/openvswitch/meter.c b/net/openvswitch/meter.c index a02c47277337..4aaeeae3af5b 100644 --- a/net/openvswitch/meter.c +++ b/net/openvswitch/meter.c @@ -133,18 +133,10 @@ static void dp_meter_instance_remove(struct dp_meter_instance *ti, static int attach_meter(struct dp_meter_table *tbl, struct dp_meter *meter) { - struct dp_meter_instance *ti = rcu_dereference_ovsl(tbl->ti); - u32 hash = meter_hash(ti, meter->id); + struct dp_meter_instance *ti; + u32 hash; int err; - /* In generally, slots selected should be empty, because - * OvS uses id-pool to fetch a available id. - */ - if (unlikely(rcu_dereference_ovsl(ti->dp_meters[hash]))) - return -EBUSY; - - dp_meter_instance_insert(ti, meter); - /* That function is thread-safe. */ tbl->count++; if (tbl->count >= tbl->max_meters_allowed) { @@ -152,16 +144,29 @@ static int attach_meter(struct dp_meter_table *tbl, struct dp_meter *meter) goto attach_err; } - if (tbl->count >= ti->n_meters && - dp_meter_instance_realloc(tbl, ti->n_meters * 2)) { - err = -ENOMEM; + ti = rcu_dereference_ovsl(tbl->ti); + if (tbl->count >= ti->n_meters) { + err = dp_meter_instance_realloc(tbl, ti->n_meters * 2); + if (err) + goto attach_err; + + ti = rcu_dereference_ovsl(tbl->ti); + } + + hash = meter_hash(ti, meter->id); + + /* In general, selected slots should be empty, because + * OvS uses id-pool to fetch available ids. + */ + if (unlikely(rcu_dereference_ovsl(ti->dp_meters[hash]))) { + err = -EBUSY; goto attach_err; } + dp_meter_instance_insert(ti, meter); return 0; attach_err: - dp_meter_instance_remove(ti, meter); tbl->count--; return err; } -- cgit v1.2.3 From 9c19d60fea9f46ed0c3394653ef4941f1a459968 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 28 Jul 2026 18:18:08 +0800 Subject: spi: spi-nxp-fspi: add per-SoC SDR/DTR clock rate limits for all supported SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit f43579ef3500 ("spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection") introduced a global 166MHz cap for DTR mode (RXCLKSRC=3), based on the i.MX8MN datasheet timing specification (Section 3.9.9, page 65). After reviewing the FlexSPI timing parameters in the datasheets for all supported SoCs, the following corrections and additions are needed: 1. SDR mode (RXCLKSRC=0) limits vary per SoC: - i.MX8MN/MM/MP/95: 66MHz (IMX8MNCEC §3.9.9, IMX8MMCEC §3.9.10, IMX8MPCEC, IMX95CEC Rev.8 §4.11.7) - i.MX8QXP/QM/DXL/ULP: 60MHz (IMX8QXPCEC, IMX8QMCEC, IMX8DXLCEC, IMX8ULPCEC §7.3.1 ND mode) - LX2160A: 100MHz (LX2160ACEC FlexSPI timing parameters) 2. DTR mode (RXCLKSRC=3) limits vary per SoC: - i.MX8MN/MM/MP/ULP: 166MHz - i.MX8QXP/QM/DXL: 200MHz (same FlexSPI IP across this family) - i.MX95: 200MHz (IMX95CEC §4.11.7.3.2.3 Table 106) - LX2160A: DTR disabled (FSPI_QUIRK_DISABLE_DTR) Update related platform data with correct speed limation according to datasheet. Fixes: f43579ef3500 ("spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection") Signed-off-by: Haibo Chen Link: https://patch.msgid.link/20260728-fspi-clock-v2-1-dbe786a4a6eb@nxp.com Signed-off-by: Mark Brown --- drivers/spi/spi-nxp-fspi.c | 83 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 80 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index 1e36ae084dd8..39c1eaaf9e0a 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -340,6 +340,18 @@ struct nxp_fspi_devtype_data { unsigned int quirks; unsigned int lut_num; bool little_endian; + /* + * The max clock rate (Hz) that FlexSPI can output to the device + * in SDR mode (RXCLKSRC=0). Defaults to 66MHz if zero. + * Some SoCs (e.g. LX2160A) support up to 100MHz in SDR mode. + */ + unsigned long max_sdr_rate; + /* + * The max clock rate (Hz) that FlexSPI can output to the device + * in DTR mode (RXCLKSRC=3). Defaults to 166MHz if zero. + * Some SoCs (e.g. i.MX95, i.MX8QM, i.MX8DXL) support up to 200MHz. + */ + unsigned long max_dtr_rate; }; static struct nxp_fspi_devtype_data lx2160a_data = { @@ -349,6 +361,10 @@ static struct nxp_fspi_devtype_data lx2160a_data = { .quirks = FSPI_QUIRK_DISABLE_DTR, .lut_num = 32, .little_endian = true, /* little-endian */ + /* + * LX2160ACEC: SDR RXCLKSRC=0 max 100MHz, DTR disabled via quirk. + */ + .max_sdr_rate = 100000000, }; static struct nxp_fspi_devtype_data imx8mm_data = { @@ -358,6 +374,21 @@ static struct nxp_fspi_devtype_data imx8mm_data = { .quirks = 0, .lut_num = 32, .little_endian = true, /* little-endian */ + /* IMX8MMCEC §3.9.10: SDR RXCLKSRC=0 max 66MHz, DDR RXCLKSRC=3 max 166MHz */ + .max_sdr_rate = 66000000, + .max_dtr_rate = 166000000, +}; + +static struct nxp_fspi_devtype_data imx8mp_data = { + .rxfifo = SZ_512, /* (64 * 64 bits) */ + .txfifo = SZ_1K, /* (128 * 64 bits) */ + .ahb_buf_size = SZ_2K, /* (256 * 64 bits) */ + .quirks = 0, + .lut_num = 32, + .little_endian = true, /* little-endian */ + /* IMX8MPCEC: SDR RXCLKSRC=0 max 66MHz, DDR RXCLKSRC=3 max 166MHz */ + .max_sdr_rate = 66000000, + .max_dtr_rate = 166000000, }; static struct nxp_fspi_devtype_data imx8qxp_data = { @@ -367,6 +398,12 @@ static struct nxp_fspi_devtype_data imx8qxp_data = { .quirks = 0, .lut_num = 32, .little_endian = true, /* little-endian */ + /* + * IMX8QXPCEC: SDR RXCLKSRC=0 max 60MHz, DDR RXCLKSRC=3 max 200MHz. + * i.MX8QM and i.MX8DXL share the same FlexSPI IP and limits. + */ + .max_sdr_rate = 60000000, + .max_dtr_rate = 200000000, }; static struct nxp_fspi_devtype_data imx8dxl_data = { @@ -376,6 +413,12 @@ static struct nxp_fspi_devtype_data imx8dxl_data = { .quirks = FSPI_QUIRK_USE_IP_ONLY, .lut_num = 32, .little_endian = true, /* little-endian */ + /* + * IMX8DXLCEC (i.MX 8XLite): SDR RXCLKSRC=0 max 60MHz, + * DDR RXCLKSRC=3 max 200MHz. + */ + .max_sdr_rate = 60000000, + .max_dtr_rate = 200000000, }; static struct nxp_fspi_devtype_data imx8ulp_data = { @@ -385,6 +428,29 @@ static struct nxp_fspi_devtype_data imx8ulp_data = { .quirks = 0, .lut_num = 16, .little_endian = true, /* little-endian */ + /* + * IMX8ULPCEC §7.3.1, Normal Drive (ND, 1.0V) mode: + * SDR RXCLKSRC=0 max 60MHz, DDR RXCLKSRC=3 max 166MHz. + * Note: Overdrive (OD, 1.05V) allows up to 180MHz DTR + * but is not the default use case. + */ + .max_sdr_rate = 60000000, + .max_dtr_rate = 166000000, +}; + +static struct nxp_fspi_devtype_data imx95_data = { + .rxfifo = SZ_512, /* (64 * 64 bits) */ + .txfifo = SZ_1K, /* (128 * 64 bits) */ + .ahb_buf_size = SZ_2K, /* (256 * 64 bits) */ + .quirks = 0, + .lut_num = 32, + .little_endian = true, /* little-endian */ + /* + * IMX95CEC Rev.8 §4.11.7: SDR RXCLKSRC=0 max 66MHz, + * DDR RXCLKSRC=3 max 200MHz (Nominal/Overdrive mode). + */ + .max_sdr_rate = 66000000, + .max_dtr_rate = 200000000, }; struct nxp_fspi { @@ -691,10 +757,20 @@ static void nxp_fspi_select_rx_sample_clk_source(struct nxp_fspi *f, reg = fspi_readl(f, f->iobase + FSPI_MCR0); if (op_is_dtr) { reg |= FSPI_MCR0_RXCLKSRC(3); - f->max_rate = 166000000; + /* + * Use the SoC-specific DTR max rate if provided, otherwise + * fall back to 166MHz (limit from IMX8MN datasheet §3.9.9). + */ + f->max_rate = f->devtype_data->max_dtr_rate ? + f->devtype_data->max_dtr_rate : 166000000; } else { /*select mode 0 */ reg &= ~FSPI_MCR0_RXCLKSRC(3); - f->max_rate = 66000000; + /* + * Use the SoC-specific SDR max rate if provided, otherwise + * fall back to 66MHz (limit from IMX8MN datasheet §3.9.9). + */ + f->max_rate = f->devtype_data->max_sdr_rate ? + f->devtype_data->max_sdr_rate : 66000000; } fspi_writel(f, reg, f->iobase + FSPI_MCR0); } @@ -1444,10 +1520,11 @@ static const struct dev_pm_ops nxp_fspi_pm_ops = { static const struct of_device_id nxp_fspi_dt_ids[] = { { .compatible = "nxp,lx2160a-fspi", .data = (void *)&lx2160a_data, }, { .compatible = "nxp,imx8mm-fspi", .data = (void *)&imx8mm_data, }, - { .compatible = "nxp,imx8mp-fspi", .data = (void *)&imx8mm_data, }, + { .compatible = "nxp,imx8mp-fspi", .data = (void *)&imx8mp_data, }, { .compatible = "nxp,imx8qxp-fspi", .data = (void *)&imx8qxp_data, }, { .compatible = "nxp,imx8dxl-fspi", .data = (void *)&imx8dxl_data, }, { .compatible = "nxp,imx8ulp-fspi", .data = (void *)&imx8ulp_data, }, + { .compatible = "nxp,imx95-fspi", .data = (void *)&imx95_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids); -- cgit v1.2.3 From b4bde5cfff8e43e948219f0a598e4bf057ecfba4 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 28 Jul 2026 18:18:09 +0800 Subject: spi: spi-nxp-fspi: enter stop mode before reconfiguring MCR0 and DLL In nxp_fspi_select_mem() the RX sample clock source (MCR0[RXCLKSRC]) and the DLL control registers (DLLxCR) are reconfigured while the FlexSPI module is still enabled. According to the FlexSPI reference manual initialization sequence, MCR0 and the DLL control registers should be programmed while the module is in stop mode, i.e. with MCR0[MDIS] set to 1, and the module re-enabled (MCR0[MDIS] = 0) afterwards. Wrap the RX sample clock source selection and the DLL calibration/ override reconfiguration in a stop-mode window to align with the RM and avoid reconfiguring timing-critical registers while the module is active. Signed-off-by: Haibo Chen Reviewed-by: Frank Li Link: https://patch.msgid.link/20260728-fspi-clock-v2-2-dbe786a4a6eb@nxp.com Signed-off-by: Mark Brown --- drivers/spi/spi-nxp-fspi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index 39c1eaaf9e0a..54355295f919 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -867,6 +867,7 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, unsigned long rate = op->max_freq; int ret; uint64_t size_kb; + u32 reg; /* * Return when following condition all meet, @@ -896,6 +897,15 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, dev_dbg(f->dev, "Target device [CS:%x] selected\n", spi_get_chipselect(spi, 0)); + /* + * Per the FlexSPI reference manual (initialization sequence), MCR0 and + * the DLL control registers should be configured while the module is in + * stop mode (MCR0[MDIS] = 1). Enter stop mode before reconfiguring the + * RX sample clock source and the DLL, then exit stop mode afterwards. + */ + reg = fspi_readl(f, f->iobase + FSPI_MCR0); + fspi_writel(f, reg | FSPI_MCR0_MDIS, f->iobase + FSPI_MCR0); + nxp_fspi_select_rx_sample_clk_source(f, op_is_dtr); rate = min(f->max_rate, op->max_freq); @@ -928,6 +938,10 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, else nxp_fspi_dll_override(f); + /* Exit stop mode now that MCR0 and the DLL have been reconfigured. */ + reg = fspi_readl(f, f->iobase + FSPI_MCR0); + fspi_writel(f, reg & ~FSPI_MCR0_MDIS, f->iobase + FSPI_MCR0); + f->pre_op_rate = op->max_freq; f->selected = spi_get_chipselect(spi, 0); -- cgit v1.2.3 From b5902b9779796d515b7d65eb9205994b7a8d00cb Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 28 Jul 2026 18:18:10 +0800 Subject: spi: spi-nxp-fspi: propagate clock reconfig failures in nxp_fspi_select_mem() nxp_fspi_select_mem() disables the FlexSPI clocks before calling clk_set_rate() and re-enabling them. If clk_set_rate() or the clock re-enable fails, the function returned early (as void) leaving both the serial root clock and the register interface clock disabled. As the function returned void, nxp_fspi_exec_op() had no way to know about the failure and continued to access FlexSPI registers (LUT setup, data transfer, AHB buffer invalidation). Accessing the controller registers while its clock is gated off results in a synchronous external abort. Make nxp_fspi_select_mem() return an error code and have nxp_fspi_exec_op() bail out on failure before any further register access, including nxp_fspi_invalid(). Signed-off-by: Haibo Chen Link: https://patch.msgid.link/20260728-fspi-clock-v2-3-dbe786a4a6eb@nxp.com Signed-off-by: Mark Brown --- drivers/spi/spi-nxp-fspi.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index 54355295f919..4425132432ec 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -859,8 +859,8 @@ static void nxp_fspi_dll_override(struct nxp_fspi *f) * Value for rest of the CS FLSHxxCR0 register would be zero. * */ -static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, - const struct spi_mem_op *op) +static int nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, + const struct spi_mem_op *op) { /* flexspi only support one DTR mode: 8D-8D-8D */ bool op_is_dtr = op->cmd.dtr && op->addr.dtr && op->dummy.dtr && op->data.dtr; @@ -881,7 +881,7 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, if ((f->selected == spi_get_chipselect(spi, 0)) && (!!(f->flags & FSPI_DTR_MODE) == op_is_dtr) && (f->pre_op_rate == op->max_freq)) - return; + return 0; /* Reset FLSHxxCR0 registers */ fspi_writel(f, 0, f->iobase + FSPI_FLSHA1CR0); @@ -922,12 +922,19 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, nxp_fspi_clk_disable_unprep(f); ret = clk_set_rate(f->clk, rate); - if (ret) - return; + if (ret) { + /* + * clk_set_rate() failed with the clocks already disabled. + * Re-enable them so the enable count matches what the caller's + * pm_runtime_put() (runtime_suspend) will drop. + */ + nxp_fspi_clk_prep_enable(f); + return ret; + } ret = nxp_fspi_clk_prep_enable(f); if (ret) - return; + return ret; /* * If clock rate > 100MHz, then switch from DLL override mode to @@ -945,6 +952,8 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, f->pre_op_rate = op->max_freq; f->selected = spi_get_chipselect(spi, 0); + + return 0; } static int nxp_fspi_read_ahb(struct nxp_fspi *f, const struct spi_mem_op *op) @@ -1132,7 +1141,16 @@ static int nxp_fspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) FSPI_STS0_ARB_IDLE, 1, POLL_TOUT, true); WARN_ON(err); - nxp_fspi_select_mem(f, mem->spi, op); + err = nxp_fspi_select_mem(f, mem->spi, op); + if (err) { + /* + * On failure the FlexSPI clock may be left disabled, so avoid + * any further register access (which would trigger a synchronous + * external abort) and bail out. + */ + pm_runtime_put_autosuspend(f->dev); + return err; + } nxp_fspi_prepare_lut(f, op); /* -- cgit v1.2.3 From 451c9075d6c53f2438d110addbeeeea6fac18567 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Sun, 26 Jul 2026 12:43:11 +0200 Subject: qede: sync udp_tunnel ports outside qede_lock in the recovery path A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports configured wedges the rtnetlink control plane of the whole machine: NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms [qede_tx_timeout:586(ens6f1)]TX timeout on queue 2! [qede_recovery_handler:2665(ens6f0)]Starting a recovery process The recovery path deadlocks on the driver's own mutex: qede_sp_task rtnl_lock() mutex_lock(&edev->qede_lock) <- taken qede_recovery_handler qede_load udp_tunnel_nic_reset_ntf __udp_tunnel_nic_device_sync info->sync_table == qede_udp_tunnel_sync mutex_lock(&edev->qede_lock) <- same task: deadlock The mutex is not recursive, so the kworker blocks on itself with rtnl_lock held, and neither lock is ever released. Every task that calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6 addrconf, sshd) blocks forever while the node still answers ping. In a vmcore from an affected production node rtnl_mutex.owner decodes to the very kworker blocked at the innermost mutex_lock() above. Re-sync the tunnel ports from qede_sp_task() after the internal lock is dropped, still under rtnl_lock as the udp_tunnel API requires. This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf() under rtnl without the internal lock. qede_recovery_handler() now returns whether it has successfully reloaded an open device, and the caller re-syncs the ports only in that case. This keeps the old gating exactly: a device that was down or a failed recovery returns false, as those paths never reached the udp_tunnel_nic_reset_ntf() call before either. This was the only user of the qede_lock()/qede_unlock() helpers, so remove them. Fixes: 8cd160a29415 ("qede: convert to new udp_tunnel_nic infra") Signed-off-by: Denis V. Lunev CC: Andrew Lunn CC: "David S. Miller" CC: Eric Dumazet CC: Jakub Kicinski CC: Paolo Abeni Reviewed-by: Jacob Keller Link: https://patch.msgid.link/20260726104311.1782900-1-den@openvz.org Signed-off-by: Paolo Abeni --- drivers/net/ethernet/qlogic/qede/qede_main.c | 44 ++++++++++++++-------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index cb0ae0650905..7ed17faced54 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -107,7 +107,7 @@ static void qede_remove(struct pci_dev *pdev); static void qede_shutdown(struct pci_dev *pdev); static void qede_link_update(void *dev, struct qed_link_output *link); static void qede_schedule_recovery_handler(void *dev); -static void qede_recovery_handler(struct qede_dev *edev); +static bool qede_recovery_handler(struct qede_dev *edev); static void qede_schedule_hw_err_handler(void *dev, enum qed_hw_err_type err_type); static void qede_get_eth_tlv_data(void *edev, void *data); @@ -1043,21 +1043,6 @@ void __qede_unlock(struct qede_dev *edev) mutex_unlock(&edev->qede_lock); } -/* This version of the lock should be used when acquiring the RTNL lock is also - * needed in addition to the internal qede lock. - */ -static void qede_lock(struct qede_dev *edev) -{ - rtnl_lock(); - __qede_lock(edev); -} - -static void qede_unlock(struct qede_dev *edev) -{ - __qede_unlock(edev); - rtnl_unlock(); -} - static void qede_periodic_task(struct work_struct *work) { struct qede_dev *edev = container_of(work, struct qede_dev, @@ -1094,6 +1079,8 @@ static void qede_sp_task(struct work_struct *work) */ if (test_and_clear_bit(QEDE_SP_RECOVERY, &edev->sp_flags)) { + bool reloaded; + cancel_delayed_work_sync(&edev->periodic_task); #ifdef CONFIG_QED_SRIOV /* SRIOV must be disabled outside the lock to avoid a deadlock. @@ -1102,9 +1089,17 @@ static void qede_sp_task(struct work_struct *work) if (pci_num_vf(edev->pdev)) qede_sriov_configure(edev->pdev, 0); #endif - qede_lock(edev); - qede_recovery_handler(edev); - qede_unlock(edev); + rtnl_lock(); + __qede_lock(edev); + reloaded = qede_recovery_handler(edev); + __qede_unlock(edev); + + /* The udp_tunnel core synchronously calls back into + * qede_udp_tunnel_sync(), which takes the qede lock. + */ + if (reloaded) + udp_tunnel_nic_reset_ntf(edev->ndev); + rtnl_unlock(); } __qede_lock(edev); @@ -2645,9 +2640,13 @@ static void qede_recovery_failed(struct qede_dev *edev) edev->ops->common->set_power_state(edev->cdev, PCI_D3hot); } -static void qede_recovery_handler(struct qede_dev *edev) +/* Returns true if an open device was successfully reloaded and its + * udp_tunnel ports need to be re-synced by the caller. + */ +static bool qede_recovery_handler(struct qede_dev *edev) { u32 curr_state = edev->state; + bool reloaded = false; int rc; DP_NOTICE(edev, "Starting a recovery process\n"); @@ -2677,17 +2676,18 @@ static void qede_recovery_handler(struct qede_dev *edev) goto err; qede_config_rx_mode(edev->ndev); - udp_tunnel_nic_reset_ntf(edev->ndev); + reloaded = true; } edev->state = curr_state; DP_NOTICE(edev, "Recovery handling is done\n"); - return; + return reloaded; err: qede_recovery_failed(edev); + return false; } static void qede_atomic_hw_err_handler(struct qede_dev *edev) -- cgit v1.2.3 From c77ffbc980efb337fd750c337d8157d532ea14e5 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Sun, 26 Jul 2026 08:12:38 -0600 Subject: io_uring/net: initialize mshot_len for send Commit: 6a8afb9fff64 ("io_uring/net: allow multishot receive per-invocation cap") changed how io_mshot_prep_retry() set sr->len, and added the same initialization in io_mshot_prep_retry(). But it neglected to touch the send path, which may also uses the mshot retry path. Ensure that sr->mshot_len always gets initialized correctly. Fixes: 6a8afb9fff64 ("io_uring/net: allow multishot receive per-invocation cap") Cc: stable@vger.kernel.org Reported-by: Sung Keum Reviewed-by: Gabriel Krisman Bertazi Signed-off-by: Jens Axboe --- io_uring/net.c | 1 + 1 file changed, 1 insertion(+) diff --git a/io_uring/net.c b/io_uring/net.c index 00a7df803b99..a74d15f7b7d2 100644 --- a/io_uring/net.c +++ b/io_uring/net.c @@ -445,6 +445,7 @@ int io_sendmsg_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) req->flags |= REQ_F_NOWAIT; if (req->flags & REQ_F_BUFFER_SELECT) sr->buf_group = req->buf_index; + sr->mshot_total_len = sr->mshot_len = 0; if (sr->flags & IORING_RECVSEND_BUNDLE) { if (req->opcode == IORING_OP_SENDMSG) return -EINVAL; -- cgit v1.2.3 From 0b88f470589960591f1cb3f238124939d0a7331d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Sun, 26 Jul 2026 08:13:09 -0600 Subject: io_uring/kbuf: cap buffer selection length at MAX_RW_COUNT io_ring_buffers_peek() builds an iovec array from provided buffers, and that in turn can be handed off to a lower level provider. Be prudent and cap the total size to MAX_RW_COUNT, which is the Linux default for how much IO do to in a single call. No bugs here, but it's a good preventative measure to avoid truncation issues. Reviewed-by: Gabriel Krisman Bertazi Signed-off-by: Jens Axboe --- io_uring/kbuf.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/io_uring/kbuf.c b/io_uring/kbuf.c index de0129bceaba..1cf5be62bb65 100644 --- a/io_uring/kbuf.c +++ b/io_uring/kbuf.c @@ -266,6 +266,9 @@ static int io_ring_buffers_peek(struct io_kiocb *req, struct buf_sel_arg *arg, if (unlikely(!nr_avail)) return -ENOBUFS; + /* MAX_RW_COUNT is the universal Linux per-call IO maximum */ + arg->max_len = min_t(size_t, arg->max_len, MAX_RW_COUNT); + buf = io_ring_head_to_buf(br, head, bl->mask); if (arg->max_len) { u32 len = READ_ONCE(buf->len); @@ -295,7 +298,7 @@ static int io_ring_buffers_peek(struct io_kiocb *req, struct buf_sel_arg *arg, /* set it to max, if not set, so we can use it unconditionally */ if (!arg->max_len) - arg->max_len = INT_MAX; + arg->max_len = MAX_RW_COUNT; req->buf_index = READ_ONCE(buf->bid); do { -- cgit v1.2.3 From 9db03d2116ab9e19051641d75c8270c84a9311ea Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 30 Jul 2026 10:33:14 -0600 Subject: Revert "io_uring/epoll: disallow adding an epoll file to an epoll context" Turns out that my naive assumption that surely nobody is using io_uring to manage nested epoll instances was wrong - libuv is in fact doing that very thing. Since we have users in the wild using that feature, we cannot remove it from upstream. Revert the commit that introduced that limitation. This reverts commit cfa1539b24aff18ecb71c6334e7270f810d145bb. Link: https://lore.kernel.org/io-uring/605939add4dfb674bd7ab39ef8dbd3fd22e754e4.camel@xry111.site/ Reported-by: Xi Ruoyao Signed-off-by: Jens Axboe --- io_uring/epoll.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/io_uring/epoll.c b/io_uring/epoll.c index eecd748cad01..b9db8bde27ec 100644 --- a/io_uring/epoll.c +++ b/io_uring/epoll.c @@ -62,9 +62,6 @@ int io_epoll_ctl(struct io_kiocb *req, unsigned int issue_flags) CLASS(fd, tf)(ie->fd); if (fd_empty(tf)) return -EBADF; - /* disallow adding an epoll context to another epoll context */ - if (ie->op == EPOLL_CTL_ADD && is_file_epoll(fd_file(tf))) - return -EINVAL; key.file = fd_file(tf); key.fd = ie->fd; -- cgit v1.2.3 From fa1ac3b9eb62918f039276d4d11cc02f682bf93c Mon Sep 17 00:00:00 2001 From: Woraphat Khiaodaeng Date: Thu, 30 Jul 2026 16:27:41 +0000 Subject: io_uring/zcrx: don't clear master_ctx from the import path import_zcrx() attaches an existing ifq to another ring. It never calls zcrx_set_ring_ctx() and so never takes the ->master_ctx reference, but its error path still passes @ctx to zcrx_unregister(), which clears ->master_ctx and drops its percpu_ref whenever ifq->master_ctx == ctx. That condition is reachable. A ring that registers an ifq with a non-zero event type_mask gets ->master_ctx pointed at itself, and nothing stops it from exporting that ifq with ZCRX_CTRL_EXPORT and importing the resulting fd back into the same ring. Failing the import after the refcount bumps -- an argument page mapped PROT_READ makes the copy_to_user() in import_zcrx() return -EFAULT -- then clears the ->master_ctx owned by the original registration, which is still live. Refcounts stay balanced and nothing is freed early, so there is no splat. The ring silently stops receiving ZCRX_EVENT_ALLOC_FAIL and ZCRX_EVENT_COPY: zcrx_send_notif() returns early on a NULL ->master_ctx, and ->master_ctx is only ever set on a freshly allocated ifq, so it cannot be restored without tearing the ring down. Pass NULL instead, matching zcrx_box_release() and the zcrx_export() error path. io_register_zcrx() only gets away with passing @ctx because zcrx_set_ring_ctx() runs after its last goto err. Fixes: 00d91481279f ("io_uring/zcrx: share an ifq between rings") Signed-off-by: Woraphat Khiaodaeng Link: https://patch.msgid.link/20260730162741.1125-1-worapat.kd2@gmail.com Reviewed-by: Pavel Begunkov [axboe: add pavel edit] Signed-off-by: Jens Axboe --- io_uring/zcrx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/io_uring/zcrx.c b/io_uring/zcrx.c index 76b9b0d54af9..f1464ea8ca64 100644 --- a/io_uring/zcrx.c +++ b/io_uring/zcrx.c @@ -808,7 +808,8 @@ err_xa_erase: scoped_guard(mutex, &ctx->mmap_lock) xa_erase(&ctx->zcrx_ctxs, id); err: - zcrx_unregister(ifq, ctx); + /* the import path never set the ->master_ctx ref, don't drop it */ + zcrx_unregister(ifq, NULL); return ret; } -- cgit v1.2.3 From 1afb8eaeec44fd011f2b93ccd9fd426d753d963b Mon Sep 17 00:00:00 2001 From: Jerome Tollet Date: Wed, 20 May 2026 07:55:44 +0530 Subject: drm/i915/hdmi: Poll for 200 msec for TMDS_Scrambler_Status HDMI 2.0 section 6.1.3.1 specifies that after enabling Scrambling_Enable and starting scrambled video transmission, the source should poll Scrambling_Status until it reads 1 or until a timeout of 200 ms expires. Add a polling step after enabling the HDMI port to check the scrambling status when HDMI scrambling is enabled. On some HDMI 2.0 sinks, omitting this check can result in 4K@60Hz (594 MHz) failing to come up correctly because the sink has not yet finished its scrambling setup. In practice, waiting for the scrambling status here fixes such sinks. While this synchronous polling is not itself explicitly required for correct modeset sequencing, HDMI 2.0 section 6.1.3.1 does recommend it as the way for the source to verify that the TMDS link is functioning correctly with scrambling enabled. v3: - Add explicit HDMI 2.0 section reference in code comment - Clarify commit message around the observed sink fix v2: - Poll TMDS_Scrambler_Status for up to 200 ms instead of using a fixed delay Reported-by: Jerome Tollet Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6868 Link: https://lore.kernel.org/dri-devel/20251230091037.5603-1-jerome.tollet@gmail.com/ Signed-off-by: Jerome Tollet Signed-off-by: Ankit Nautiyal Reviewed-by: Arun R Murthy Link: https://patch.msgid.link/20260520022544.3097252-1-ankit.k.nautiyal@intel.com (cherry picked from commit b7d51d65e4f12a48392d260613108ec262bc7774) Fixes: 15953637886d ("drm/i915: enable scrambling") Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_ddi.c | 2 ++ drivers/gpu/drm/i915/display/intel_hdmi.c | 26 ++++++++++++++++++++++++++ drivers/gpu/drm/i915/display/intel_hdmi.h | 2 ++ 3 files changed, 30 insertions(+) diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 6296635c4e79..95008e0c0eb8 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3501,6 +3501,8 @@ static void intel_ddi_enable_hdmi(struct intel_atomic_state *state, } intel_ddi_buf_enable(encoder, buf_ctl); + + intel_hdmi_poll_for_scrambling_enable(crtc_state, connector); } static void intel_ddi_enable(struct intel_atomic_state *state, diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c index 9076c2b176ec..b9d11fb8559d 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.c +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c @@ -2728,6 +2728,32 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *_ drm_connector_attach_max_bpc_property(&connector->base, 8, 12); } +/* + * HDMI 2.0 spec, section 6.1.3.1 (Scrambling Control): after + * enabling Scrambling_Enable and starting scrambled video + * transmission, poll Scrambling_Status for up to 200 ms. + */ +void +intel_hdmi_poll_for_scrambling_enable(const struct intel_crtc_state *crtc_state, + struct drm_connector *_connector) +{ + struct intel_connector *connector = to_intel_connector(_connector); + struct intel_display *display = to_intel_display(crtc_state); + bool scrambling_enabled = false; + int ret; + + if (!crtc_state->hdmi_scrambling) + return; + + /* Poll for a max of 200 msec as per HDMI spec */ + ret = poll_timeout_us(scrambling_enabled = drm_scdc_get_scrambling_status(&connector->base), + scrambling_enabled, 1000, 200 * 1000, false); + if (ret) + drm_dbg_kms(display->drm, + "[CONNECTOR:%d:%s] Timed out waiting for scrambling enable\n", + connector->base.base.id, connector->base.name); +} + /* * intel_hdmi_handle_sink_scrambling: handle sink scrambling/clock ratio setup * @encoder: intel_encoder diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.h b/drivers/gpu/drm/i915/display/intel_hdmi.h index be2fad57e4ad..0fa3661568e8 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.h +++ b/drivers/gpu/drm/i915/display/intel_hdmi.h @@ -70,5 +70,7 @@ void hsw_read_infoframe(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state, unsigned int type, void *frame, ssize_t len); +void intel_hdmi_poll_for_scrambling_enable(const struct intel_crtc_state *crtc_state, + struct drm_connector *_connector); #endif /* __INTEL_HDMI_H__ */ -- cgit v1.2.3 From bc0e8faf90e776a2f1f3967a04e8091e6bdb4977 Mon Sep 17 00:00:00 2001 From: Kyumin Lee Date: Fri, 31 Jul 2026 04:27:34 +0900 Subject: io_uring: preserve task restrictions across exec Per-task restrictions apply to all rings created by a task. Once installed, they should not be dropped across exec. For a task that has used io_uring, the exec cancellation path calls __io_uring_free(). This frees both the task context and the per-task restriction, so a ring created after exec is unrestricted. Split task context cleanup into io_uring_free_tctx(), and use it from the exec cancellation path. Keep __io_uring_free() for final task cleanup, where both the context and restriction are released. Fixes: ed82f35b926b ("io_uring: allow registration of per-task restrictions") Cc: stable@vger.kernel.org # 7.1+ Signed-off-by: Kyumin Lee Link: https://patch.msgid.link/20260730192734.459247-1-fyonglkm@gmail.com Signed-off-by: Jens Axboe --- io_uring/cancel.c | 2 +- io_uring/tctx.c | 7 ++++++- io_uring/tctx.h | 1 + 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/io_uring/cancel.c b/io_uring/cancel.c index 8c6fa6f367e4..7d7820eab878 100644 --- a/io_uring/cancel.c +++ b/io_uring/cancel.c @@ -660,6 +660,6 @@ end_wait: */ atomic_dec(&tctx->in_cancel); /* for exec all current's requests should be gone, kill tctx */ - __io_uring_free(current); + io_uring_free_tctx(current); } } diff --git a/io_uring/tctx.c b/io_uring/tctx.c index cc3bf2b3bdbc..466b7300e208 100644 --- a/io_uring/tctx.c +++ b/io_uring/tctx.c @@ -43,7 +43,7 @@ static struct io_wq *io_init_wq_offload(struct io_ring_ctx *ctx, return io_wq_create(concurrency, &data); } -void __io_uring_free(struct task_struct *tsk) +void io_uring_free_tctx(struct task_struct *tsk) { struct io_uring_task *tctx = tsk->io_uring; struct io_tctx_node *node; @@ -67,6 +67,11 @@ void __io_uring_free(struct task_struct *tsk) kfree(tctx); tsk->io_uring = NULL; } +} + +void __io_uring_free(struct task_struct *tsk) +{ + io_uring_free_tctx(tsk); if (tsk->io_uring_restrict) { io_put_bpf_filters(tsk->io_uring_restrict); kfree(tsk->io_uring_restrict); diff --git a/io_uring/tctx.h b/io_uring/tctx.h index 2310d2a0c46d..76ad1ad4594e 100644 --- a/io_uring/tctx.h +++ b/io_uring/tctx.h @@ -12,6 +12,7 @@ void io_uring_del_tctx_node(unsigned long index); int __io_uring_add_tctx_node(struct io_ring_ctx *ctx); int __io_uring_add_tctx_node_from_submit(struct io_ring_ctx *ctx); void io_uring_clean_tctx(struct io_uring_task *tctx); +void io_uring_free_tctx(struct task_struct *tsk); void io_uring_unreg_ringfd(void); int io_ringfd_register(struct io_ring_ctx *ctx, void __user *__arg, -- cgit v1.2.3 From e7188199eff46a636f3436356f0aae039be6dd66 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 22 Jul 2026 10:04:19 +0900 Subject: ksmbd: fix use-after-free in __close_file_table_ids() A ksmbd_file can remain alive after logical close while another session holds a temporary reference obtained through ksmbd_lookup_fd_inode(). ksmbd_close_fd() currently marks the file closed and drops the idr-owned reference, but leaves the pointer published in the closing session's idr until the final reference is dropped. If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final() supplies the foreign session's file table to __ksmbd_close_fd(). The object is then freed without being removed from its owner's idr, and the owner session later dereferences the stale pointer during file-table teardown. Remove the volatile id from the owner's idr while ksmbd_close_fd() still holds that table's lock, and clear volatile_id before dropping the idr-owned reference. A later foreign final put then only performs physical destruction and cannot remove the object from the wrong table. Fixes: 8510a043d334 ("ksmbd: increment reference count of parent fp") Reported-by: Yunseong Kim Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/vfs_cache.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/smb/server/vfs_cache.c b/fs/smb/server/vfs_cache.c index d95c405eab11..a141025581af 100644 --- a/fs/smb/server/vfs_cache.c +++ b/fs/smb/server/vfs_cache.c @@ -697,6 +697,8 @@ int ksmbd_close_fd(struct ksmbd_work *work, u64 id) fp = NULL; else { fp->f_state = FP_CLOSED; + idr_remove(ft->idr, id); + fp->volatile_id = KSMBD_NO_FID; closed = true; if (!atomic_dec_and_test(&fp->refcount)) fp = NULL; -- cgit v1.2.3 From cb469993b3a61a72653770856d37af616d72d05f Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 23 Jul 2026 23:07:14 +0900 Subject: ksmbd: reject repeated SMB2 NEGOTIATE requests Unauthenticated client can send multiple successful SMB2 NEGOTIATE requests on one connection before SESSION_SETUP. While the connection is in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation. Only the final allocation is freed when the connection is released, leaking one object for every additional successful request. A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect without replying in this case. Set the connection exiting when rejecting the request, in addition to suppressing the response. Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they update connection-wide dialect and negotiation state. Move the locking contract to ksmbd_smb_negotiate_common(), where the state and dialect are selected, and add ksmbd_conn_new() for consistent state access. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Reported-by: Runa Takemoto Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/connection.h | 5 +++++ fs/smb/server/smb2pdu.c | 10 ++-------- fs/smb/server/smb_common.c | 37 ++++++++++++++++++++++++++++++------- 3 files changed, 37 insertions(+), 15 deletions(-) diff --git a/fs/smb/server/connection.h b/fs/smb/server/connection.h index ec75633b7da0..2a194ee36fb4 100644 --- a/fs/smb/server/connection.h +++ b/fs/smb/server/connection.h @@ -200,6 +200,11 @@ void ksmbd_conn_r_count_dec(struct ksmbd_conn *conn); * This is a hack. We will move status to a proper place once we land * a multi-sessions support. */ +static inline bool ksmbd_conn_new(struct ksmbd_conn *conn) +{ + return READ_ONCE(conn->status) == KSMBD_SESS_NEW; +} + static inline bool ksmbd_conn_good(struct ksmbd_conn *conn) { return READ_ONCE(conn->status) == KSMBD_SESS_GOOD; diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index c1ba5e01aa7f..404a4203f7da 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -1325,6 +1325,8 @@ static __le32 deassemble_neg_contexts(struct ksmbd_conn *conn, * smb2_handle_negotiate() - handler for smb2 negotiate command * @work: smb work containing smb request buffer * + * The caller holds conn->srv_mutex. + * * Return: 0 */ int smb2_handle_negotiate(struct ksmbd_work *work) @@ -1338,13 +1340,6 @@ int smb2_handle_negotiate(struct ksmbd_work *work) ksmbd_debug(SMB, "Received negotiate request\n"); conn->need_neg = false; - if (ksmbd_conn_good(conn)) { - pr_err("conn->tcp_status is already in CifsGood State\n"); - work->send_no_response = 1; - return rc; - } - - ksmbd_conn_lock(conn); smb2_buf_len = get_rfc1002_len(work->request_buf); smb2_neg_size = offsetof(struct smb2_negotiate_req, Dialects); if (smb2_neg_size > smb2_buf_len) { @@ -1495,7 +1490,6 @@ int smb2_handle_negotiate(struct ksmbd_work *work) ksmbd_conn_set_need_setup(conn); err_out: - ksmbd_conn_unlock(conn); if (rc) rsp->hdr.Status = STATUS_INSUFFICIENT_RESOURCES; diff --git a/fs/smb/server/smb_common.c b/fs/smb/server/smb_common.c index 7de73223189a..080fbc9eb470 100644 --- a/fs/smb/server/smb_common.c +++ b/fs/smb/server/smb_common.c @@ -608,23 +608,46 @@ int ksmbd_smb_negotiate_common(struct ksmbd_work *work, unsigned int command) struct ksmbd_conn *conn = work->conn; int ret; - conn->dialect = - ksmbd_negotiate_smb_dialect(work->request_buf); - ksmbd_debug(SMB, "conn->dialect 0x%x\n", conn->dialect); - if (command == SMB2_NEGOTIATE_HE) { + /* + * An SMB2 NEGOTIATE is valid for a new connection, or after an + * SMB1 multi-protocol negotiate has selected SMB2. Do not allow + * a second SMB2 NEGOTIATE to replace connection-wide state + * while a session setup is pending. KSMBD_SESS_NEED_RECONNECT + * is a transient session state and does not restart transport + * negotiation. + */ + ksmbd_conn_lock(conn); + if (!ksmbd_conn_new(conn) && + !ksmbd_conn_need_negotiate(conn)) { + work->send_no_response = 1; + ksmbd_conn_set_exiting(conn); + ksmbd_conn_unlock(conn); + return 0; + } + + conn->dialect = + ksmbd_negotiate_smb_dialect(work->request_buf); + ksmbd_debug(SMB, "conn->dialect 0x%x\n", conn->dialect); ret = smb2_handle_negotiate(work); + ksmbd_conn_unlock(conn); return ret; } if (command == SMB_COM_NEGOTIATE) { + ksmbd_conn_lock(conn); + conn->dialect = + ksmbd_negotiate_smb_dialect(work->request_buf); + ksmbd_debug(SMB, "conn->dialect 0x%x\n", conn->dialect); if (__smb2_negotiate(conn)) { init_smb3_11_server(conn); - init_smb2_neg_rsp(work); + ret = init_smb2_neg_rsp(work); ksmbd_debug(SMB, "Upgrade to SMB2 negotiation\n"); - return 0; + } else { + ret = smb_handle_negotiate(work); } - return smb_handle_negotiate(work); + ksmbd_conn_unlock(conn); + return ret; } pr_err("Unknown SMB negotiation command: %u\n", command); -- cgit v1.2.3 From e8bb506e6ef749ac0336f3e579d8d02396b7d832 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 20 Jul 2026 10:32:01 +0900 Subject: ksmbd: use memcmp() to compare ClientGUIDs ClientGUID is a fixed-size binary value and can contain embedded NUL bytes. strncmp() stops comparing at the first NUL byte, so different ClientGUID values can incorrectly be treated as equal. Use memcmp() in SMB3 multichannel session binding and FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE bytes. Fixes: f5a544e3bab7 ("ksmbd: add support for SMB3 multichannel") Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Reported-by: Samu Suggested-by: Samu Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 404a4203f7da..76f63f9adc72 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -1969,7 +1969,7 @@ int smb2_sess_setup(struct ksmbd_work *work) goto out_err; } - if (strncmp(conn->ClientGUID, sess->ClientGUID, + if (memcmp(conn->ClientGUID, sess->ClientGUID, SMB2_CLIENT_GUID_SIZE)) { rc = -ENOENT; goto out_err; @@ -8690,7 +8690,7 @@ static int fsctl_validate_negotiate_info(struct ksmbd_conn *conn, goto err_out; } - if (strncmp(neg_req->Guid, conn->ClientGUID, SMB2_CLIENT_GUID_SIZE)) { + if (memcmp(neg_req->Guid, conn->ClientGUID, SMB2_CLIENT_GUID_SIZE)) { ret = -EINVAL; goto err_out; } -- cgit v1.2.3 From cc679d7a6303e84d769f2afcde1fc51c51f127cd Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Wed, 29 Jul 2026 07:44:40 -0700 Subject: uprobes: Fix NULL pointer dereference in hprobe_expire() Forking a task that has a pending uretprobe can oops the kernel with a NULL pointer dereference in the clone() path: BUG: kernel NULL pointer dereference, address: 0000000000000018 Oops: 0002 [#1] SMP NOPTI RIP: 0010:hprobe_expire CR2: 0000000000000018 Call Trace: uprobe_copy_process copy_process kernel_clone __x64_sys_clone do_syscall_64 entry_SYSCALL_64_after_hwframe This was found on real hosts on Meta fleet. I've got the impression that this is what is happening: CPU 1 CPU 2 (traced task) ----- ------------------- hit uprobe, prepare_uretprobe(): hprobe LEASED, refcount >= 1 uprobe_unregister() put_uprobe(): refcount -> 0 fork() -> dup_utask() hprobe_expire(hprobe, true) try_get_uprobe() -> NULL get_uprobe(NULL) <-- Oops Only take the extra reference when the uprobe is non-NULL; a NULL means it is gone and is the correct value to return. Fixes: dd1a7567784e ("uprobes: SRCU-protect uretprobe lifetime (with timeout)") Signed-off-by: Breno Leitao Signed-off-by: Peter Zijlstra (Intel) Acked-by: Oleg Nesterov Acked-by: Andrii Nakryiko Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260729-uprobe-v1-1-61896b87c867@debian.org --- kernel/events/uprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 4084e926e284..6300b216012c 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -830,7 +830,7 @@ static struct uprobe *hprobe_expire(struct hprobe *hprobe, bool get) if (try_cmpxchg(&hprobe->state, &hstate, uprobe ? HPROBE_STABLE : HPROBE_GONE)) { /* We won the race, we are the ones to unlock SRCU */ __srcu_read_unlock(&uretprobes_srcu, hprobe->srcu_idx); - return get ? get_uprobe(uprobe) : uprobe; + return get && uprobe ? get_uprobe(uprobe) : uprobe; } /* -- cgit v1.2.3 From c679ce3be6cb63763d68ab9b5d9d73ddc0a40762 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 29 Jun 2026 14:52:29 +0200 Subject: iomap: add a separate bio_set for iomap_split_ioend iomap_split_ioend can split bios that already come from iomap_ioend_bioset and thus deadlock when the bioset is exhausted. Add a separate bio_set to avoid this deadlock. Christian Brauner says: Mark iomap_ioend_split_bioset static as it is only used in ioend.c, fixing the sparse warning reported by the kernel test robot. Fixes: 5fcbd555d483 ("iomap: split bios to zone append limits in the submission handlers") Signed-off-by: Christoph Hellwig Link: https://patch.msgid.link/20260629125229.3400726-1-hch@lst.de Signed-off-by: Christian Brauner (Amutable) --- fs/iomap/ioend.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/fs/iomap/ioend.c b/fs/iomap/ioend.c index 30468d51b5ad..fb636dce43af 100644 --- a/fs/iomap/ioend.c +++ b/fs/iomap/ioend.c @@ -13,6 +13,7 @@ struct bio_set iomap_ioend_bioset; EXPORT_SYMBOL_GPL(iomap_ioend_bioset); +static struct bio_set iomap_ioend_split_bioset; struct iomap_ioend *iomap_init_ioend(struct inode *inode, struct bio *bio, loff_t file_offset, u16 ioend_flags) @@ -488,7 +489,8 @@ struct iomap_ioend *iomap_split_ioend(struct iomap_ioend *ioend, sector_offset = ALIGN_DOWN(sector_offset << SECTOR_SHIFT, i_blocksize(ioend->io_inode)) >> SECTOR_SHIFT; - split = bio_split(bio, sector_offset, GFP_NOFS, &iomap_ioend_bioset); + split = bio_split(bio, sector_offset, GFP_NOFS, + &iomap_ioend_split_bioset); if (IS_ERR(split)) return ERR_CAST(split); split->bi_private = bio->bi_private; @@ -511,8 +513,23 @@ EXPORT_SYMBOL_GPL(iomap_split_ioend); static int __init iomap_ioend_init(void) { - return bioset_init(&iomap_ioend_bioset, 4 * (PAGE_SIZE / SECTOR_SIZE), + const unsigned int nr_mempool_entries = 4 * (PAGE_SIZE / SECTOR_SIZE); + int error; + + error = bioset_init(&iomap_ioend_bioset, nr_mempool_entries, offsetof(struct iomap_ioend, io_bio), BIOSET_NEED_BVECS); + if (error) + return error; + error = bioset_init(&iomap_ioend_split_bioset, nr_mempool_entries, + offsetof(struct iomap_ioend, io_bio), + BIOSET_NEED_BVECS); + if (error) + goto out_exit_ioend_bioset; + return 0; + +out_exit_ioend_bioset: + bioset_exit(&iomap_ioend_bioset); + return error; } fs_initcall(iomap_ioend_init); -- cgit v1.2.3 From b7ab86bdc65eadcfc43a0e3faf682a3f750cfb96 Mon Sep 17 00:00:00 2001 From: Niklas Schnelle Date: Wed, 22 Jul 2026 15:08:34 +0200 Subject: s390/pci: Fix s390_pci_mmio_write syscall error return without MIO On a machine without PCI memory-I/O (MIO) support or when running with pci=nomio the s390 specific PCI MMIO write syscall checks if the MMIO cookie is above ZPCI_IOMAP_ADDR_BASE as a sanity check before even trying to perform the MMIO. If this check fails the return value was left unchanged and thus 0 from prior operations falsely indicating success. This could potentially confuse user-space into falsely believing the MMIO, on a mapping not valid for MMIO was successful. Fix this by setting the return value to -EFAULT prior to the check following the same pattern as elsewhere in the same function. Cc: stable@vger.kernel.org Reviewed-by: Julian Ruess Reviewed-by: Farhan Ali Fixes: a67a88b0b8de ("s390/pci: remove races against pte updates") Signed-off-by: Niklas Schnelle Signed-off-by: Vasily Gorbik --- arch/s390/pci/pci_mmio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/pci/pci_mmio.c b/arch/s390/pci/pci_mmio.c index 51e7a28af899..f3f79ba78410 100644 --- a/arch/s390/pci/pci_mmio.c +++ b/arch/s390/pci/pci_mmio.c @@ -188,6 +188,7 @@ SYSCALL_DEFINE3(s390_pci_mmio_write, unsigned long, mmio_addr, goto out_unlock_mmap; } + ret = -EFAULT; io_addr = (void __iomem *)((args.pfn << PAGE_SHIFT) | (mmio_addr & ~PAGE_MASK)); -- cgit v1.2.3 From 06afe425d5283b9764303de47f554da5a808ce8a Mon Sep 17 00:00:00 2001 From: Holger Dengler Date: Wed, 29 Jul 2026 11:36:15 +0200 Subject: s390/zcrypt: Validate length for CCA AES cipher key requests cca_cipher2protkey() derives the copy length for the CPRB parameter block directly from the length field in the key token. Reject the request early if the token length exceeds the available space in the parameter block. Fixes: 4bc123b18ce6 ("s390/zcrypt: Add low level functions for CCA AES cipher keys") Signed-off-by: Holger Dengler Cc: stable@vger.kernel.org # 5.4+ Reviewed-by: Harald Freudenberger Signed-off-by: Vasily Gorbik --- drivers/s390/crypto/zcrypt_ccamisc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/s390/crypto/zcrypt_ccamisc.c b/drivers/s390/crypto/zcrypt_ccamisc.c index 84936a795b95..db6a4211a97e 100644 --- a/drivers/s390/crypto/zcrypt_ccamisc.c +++ b/drivers/s390/crypto/zcrypt_ccamisc.c @@ -1261,6 +1261,9 @@ int cca_cipher2protkey(u16 cardnr, u16 domain, const u8 *ckey, } __packed * prepparm; int keytoklen = ((struct cipherkeytoken *)ckey)->len; + if (keytoklen > PARMBSIZE - sizeof(struct aureqparm)) + return -EINVAL; + /* get already prepared memory for 2 cprbs with param block each */ rc = alloc_and_prep_cprbmem(PARMBSIZE, &mem, &preqcblk, &prepcblk, xflags); -- cgit v1.2.3 From a9ae0f6dd45c3ccc1d69363f7aea8af179122730 Mon Sep 17 00:00:00 2001 From: Holger Dengler Date: Wed, 29 Jul 2026 11:36:16 +0200 Subject: s390/zcrypt: Validate length for CCA ECC private key requests cca_ecc2protkey() derives the copy length for the CPRB parameter block directly from the length field in the key token. Reject the request early if the token length exceeds the available space in the parameter block. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Harald Freudenberger Signed-off-by: Vasily Gorbik --- drivers/s390/crypto/zcrypt_ccamisc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/s390/crypto/zcrypt_ccamisc.c b/drivers/s390/crypto/zcrypt_ccamisc.c index db6a4211a97e..322677a8d320 100644 --- a/drivers/s390/crypto/zcrypt_ccamisc.c +++ b/drivers/s390/crypto/zcrypt_ccamisc.c @@ -1428,6 +1428,9 @@ int cca_ecc2protkey(u16 cardnr, u16 domain, const u8 *key, } __packed * prepparm; int keylen = ((struct eccprivkeytoken *)key)->len; + if (keylen > PARMBSIZE - sizeof(struct aureqparm)) + return -EINVAL; + /* get already prepared memory for 2 cprbs with param block each */ rc = alloc_and_prep_cprbmem(PARMBSIZE, &mem, &preqcblk, &prepcblk, xflags); -- cgit v1.2.3 From 36b230835b8a008266aad22168ca52afacc8a58d Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Wed, 29 Jul 2026 13:40:09 +0200 Subject: s390/zcrypt: Fix buffer over-read in cca_cipher2protkey Add validation of both the actual key buffer size and token length fields in all the cca_check_sec*token() functions. Additionally check in cca_gencipherkey() for possible underflow with returned key size. The CCA token structures contain user-controlled len fields that were used in operations without proper validation against both the actual buffer size and minimum token structure size. An attacker could set this field larger than the actual buffer size, leading to reading beyond buffer boundaries. This may result in a kernel crash or exposure of memory via sending this as part of a request down to the crypto card. Also an attacker could have used a very small len value and thus enforce a buffer under-run which may produce similar effects as a over-read. So now a key must - key buf length must be at least sizeof the token struct - the key len field inside the token must fit into the range of sizeof key token struct ... key buf length Fixes: 4bc123b18ce6 ("s390/zcrypt: Add low level functions for CCA AES cipher keys") Cc: stable@vger.kernel.org Reviewed-by: Ingo Franzki Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik --- drivers/s390/crypto/pkey_cca.c | 15 +++------ drivers/s390/crypto/zcrypt_ccamisc.c | 64 ++++++++++++++++++++++++++++++------ drivers/s390/crypto/zcrypt_ccamisc.h | 6 ++-- 3 files changed, 62 insertions(+), 23 deletions(-) diff --git a/drivers/s390/crypto/pkey_cca.c b/drivers/s390/crypto/pkey_cca.c index 4bc47952324e..e8dc2f77c137 100644 --- a/drivers/s390/crypto/pkey_cca.c +++ b/drivers/s390/crypto/pkey_cca.c @@ -236,22 +236,16 @@ static int cca_key2protkey(const struct pkey_apqn *apqns, size_t nr_apqns, if (hdr->type == TOKTYPE_CCA_INTERNAL && hdr->version == TOKVER_CCA_AES) { /* CCA AES data key */ - if (keylen < sizeof(struct secaeskeytoken)) - return -EINVAL; - if (cca_check_secaeskeytoken(pkey_dbf_info, 3, key, 0)) + if (cca_check_secaeskeytoken(pkey_dbf_info, 3, key, keylen, 0)) return -EINVAL; } else if (hdr->type == TOKTYPE_CCA_INTERNAL && hdr->version == TOKVER_CCA_VLSC) { /* CCA AES cipher key */ - if (keylen < hdr->len) - return -EINVAL; if (cca_check_secaescipherkey(pkey_dbf_info, - 3, key, 0, 1)) + 3, key, keylen, 0, 1)) return -EINVAL; } else if (hdr->type == TOKTYPE_CCA_INTERNAL_PKA) { /* CCA ECC (private) key */ - if (keylen < sizeof(struct eccprivkeytoken)) - return -EINVAL; if (cca_check_sececckeytoken(pkey_dbf_info, 3, key, keylen, 1)) return -EINVAL; } else { @@ -484,7 +478,7 @@ static int cca_verifykey(const u8 *key, u32 keylen, hdr->version == TOKVER_CCA_AES) { struct secaeskeytoken *t = (struct secaeskeytoken *)key; - rc = cca_check_secaeskeytoken(pkey_dbf_info, 3, key, 0); + rc = cca_check_secaeskeytoken(pkey_dbf_info, 3, key, keylen, 0); if (rc) goto out; *keytype = PKEY_TYPE_CCA_DATA; @@ -512,7 +506,8 @@ static int cca_verifykey(const u8 *key, u32 keylen, hdr->version == TOKVER_CCA_VLSC) { struct cipherkeytoken *t = (struct cipherkeytoken *)key; - rc = cca_check_secaescipherkey(pkey_dbf_info, 3, key, 0, 1); + rc = cca_check_secaescipherkey(pkey_dbf_info, 3, + key, keylen, 0, 1); if (rc) goto out; *keytype = PKEY_TYPE_CCA_CIPHER; diff --git a/drivers/s390/crypto/zcrypt_ccamisc.c b/drivers/s390/crypto/zcrypt_ccamisc.c index 322677a8d320..f797786107b9 100644 --- a/drivers/s390/crypto/zcrypt_ccamisc.c +++ b/drivers/s390/crypto/zcrypt_ccamisc.c @@ -62,12 +62,18 @@ static DEFINE_MUTEX(dev_status_mem_mutex); * also checked. Returns 0 on success or errno value on failure. */ int cca_check_secaeskeytoken(debug_info_t *dbg, int dbflvl, - const u8 *token, int keybitsize) + const u8 *token, u32 keysize, int keybitsize) { struct secaeskeytoken *t = (struct secaeskeytoken *)token; #define DBF(...) debug_sprintf_event(dbg, dbflvl, ##__VA_ARGS__) + if (keysize < sizeof(*t)) { + if (dbg) + DBF("%s keysize %u < min token size %zu\n", + __func__, keysize, sizeof(*t)); + return -EINVAL; + } if (t->type != TOKTYPE_CCA_INTERNAL) { if (dbg) DBF("%s token check failed, type 0x%02x != 0x%02x\n", @@ -101,14 +107,20 @@ EXPORT_SYMBOL(cca_check_secaeskeytoken); * Returns 0 on success or errno value on failure. */ int cca_check_secaescipherkey(debug_info_t *dbg, int dbflvl, - const u8 *token, int keybitsize, - int checkcpacfexport) + const u8 *token, u32 keysize, + int keybitsize, int checkcpacfexport) { struct cipherkeytoken *t = (struct cipherkeytoken *)token; bool keybitsizeok = true; #define DBF(...) debug_sprintf_event(dbg, dbflvl, ##__VA_ARGS__) + if (keysize < sizeof(*t)) { + if (dbg) + DBF("%s keysize %u < min token size %zu\n", + __func__, keysize, sizeof(*t)); + return -EINVAL; + } if (t->type != TOKTYPE_CCA_INTERNAL) { if (dbg) DBF("%s token check failed, type 0x%02x != 0x%02x\n", @@ -121,6 +133,18 @@ int cca_check_secaescipherkey(debug_info_t *dbg, int dbflvl, __func__, (int)t->version, TOKVER_CCA_VLSC); return -EINVAL; } + if (t->len > keysize) { + if (dbg) + DBF("%s token check failed, len %d > keysize %u\n", + __func__, (int)t->len, keysize); + return -EINVAL; + } + if (t->len < sizeof(*t)) { + if (dbg) + DBF("%s token check failed, len %d < min token size %zu\n", + __func__, (int)t->len, sizeof(*t)); + return -EINVAL; + } if (t->algtype != 0x02) { if (dbg) DBF("%s token check failed, algtype 0x%02x != 0x02\n", @@ -195,6 +219,12 @@ int cca_check_sececckeytoken(debug_info_t *dbg, int dbflvl, #define DBF(...) debug_sprintf_event(dbg, dbflvl, ##__VA_ARGS__) + if (keysize < sizeof(*t)) { + if (dbg) + DBF("%s keysize %u < min token size %zu\n", + __func__, keysize, sizeof(*t)); + return -EINVAL; + } if (t->type != TOKTYPE_CCA_INTERNAL_PKA) { if (dbg) DBF("%s token check failed, type 0x%02x != 0x%02x\n", @@ -207,6 +237,12 @@ int cca_check_sececckeytoken(debug_info_t *dbg, int dbflvl, __func__, (int)t->len, keysize); return -EINVAL; } + if (t->len < sizeof(*t)) { + if (dbg) + DBF("%s token check failed, len %d < min token size %zu\n", + __func__, (int)t->len, sizeof(*t)); + return -EINVAL; + } if (t->secid != 0x20) { if (dbg) DBF("%s token check failed, secid 0x%02x != 0x20\n", @@ -443,7 +479,8 @@ int cca_genseckey(u16 cardnr, u16 domain, /* check secure key token */ rc = cca_check_secaeskeytoken(zcrypt_dbf_info, DBF_ERR, - prepparm->lv3.keyblock.tok, 8 * keysize); + prepparm->lv3.keyblock.tok, + seckeysize, 8 * keysize); if (rc) { rc = -EIO; goto out; @@ -582,7 +619,8 @@ int cca_clr2seckey(u16 cardnr, u16 domain, u32 keybitsize, /* check secure key token */ rc = cca_check_secaeskeytoken(zcrypt_dbf_info, DBF_ERR, - prepparm->lv3.keyblock.tok, 8 * keysize); + prepparm->lv3.keyblock.tok, + seckeysize, 8 * keysize); if (rc) { rc = -EIO; goto out; @@ -842,6 +880,7 @@ int cca_gencipherkey(u16 cardnr, u16 domain, u32 keybitsize, u32 keygenflags, } kb; } __packed * prepparm; struct cipherkeytoken *t; + u32 keybuflen; /* get already prepared memory for 2 cprbs with param block each */ rc = alloc_and_prep_cprbmem(PARMBSIZE, &mem, @@ -936,23 +975,28 @@ int cca_gencipherkey(u16 cardnr, u16 domain, u32 keybitsize, u32 keygenflags, } /* and some checks on the generated key */ + t = (struct cipherkeytoken *)prepparm->kb.tlv1.gen_key; + if (prepparm->kb.tlv1.len < 2 * sizeof(uint16_t) + sizeof(*t)) { + rc = -EIO; + goto out; + } + keybuflen = prepparm->kb.tlv1.len - 2 * sizeof(uint16_t); rc = cca_check_secaescipherkey(zcrypt_dbf_info, DBF_ERR, prepparm->kb.tlv1.gen_key, - keybitsize, 1); + keybuflen, keybitsize, 1); if (rc) { rc = -EIO; goto out; } /* copy the generated vlsc key token */ - t = (struct cipherkeytoken *)prepparm->kb.tlv1.gen_key; if (keybuf) { - if (*keybufsize >= t->len) - memcpy(keybuf, t, t->len); + if (*keybufsize >= keybuflen) + memcpy(keybuf, t, keybuflen); else rc = -EINVAL; } - *keybufsize = t->len; + *keybufsize = keybuflen; out: free_cprbmem(mem, PARMBSIZE, false, xflags); diff --git a/drivers/s390/crypto/zcrypt_ccamisc.h b/drivers/s390/crypto/zcrypt_ccamisc.h index 07bbb1c20022..a4534f8b2f1d 100644 --- a/drivers/s390/crypto/zcrypt_ccamisc.h +++ b/drivers/s390/crypto/zcrypt_ccamisc.h @@ -136,7 +136,7 @@ struct eccprivkeytoken { * also checked. Returns 0 on success or errno value on failure. */ int cca_check_secaeskeytoken(debug_info_t *dbg, int dbflvl, - const u8 *token, int keybitsize); + const u8 *token, u32 keysize, int keybitsize); /* * Simple check if the token is a valid CCA secure AES cipher key @@ -146,8 +146,8 @@ int cca_check_secaeskeytoken(debug_info_t *dbg, int dbflvl, * Returns 0 on success or errno value on failure. */ int cca_check_secaescipherkey(debug_info_t *dbg, int dbflvl, - const u8 *token, int keybitsize, - int checkcpacfexport); + const u8 *token, u32 keysize, + int keybitsize, int checkcpacfexport); /* * Simple check if the token is a valid CCA secure ECC private -- cgit v1.2.3 From 983279d7f86ade73db86f886e09172dd567031b5 Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Thu, 23 Jul 2026 11:54:52 +0200 Subject: s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs There is a wrong upper limit check for the domain value when an EP11 CPRB is processed for sending to a crypto card. This check is only active on custom device nodes but may lead to access heap memory behind perms->adm when an administrative CPRB is sent. Add correct limit (AP_DOMAINS = 256) checking to fix this. Fixes: cfd68b33094e ("s390/zcrypt: Filter admin CPRBs on custom devices") Cc: stable@vger.kernel.org Reviewed-by: Finn Callies Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik --- drivers/s390/crypto/zcrypt_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c index f57189c2b839..81eefdeae248 100644 --- a/drivers/s390/crypto/zcrypt_api.c +++ b/drivers/s390/crypto/zcrypt_api.c @@ -1077,7 +1077,7 @@ static long _zcrypt_send_ep11_cprb(u32 xflags, struct ap_perms *perms, print_hex_dump_debug("ep11req: ", DUMP_PREFIX_ADDRESS, 16, 1, ap_msg.msg, ap_msg.len, false); - if (perms != &ap_perms && domain < AUTOSEL_DOM) { + if (perms != &ap_perms && domain < AP_DOMAINS) { if (ap_msg.flags & AP_MSG_FLAG_ADMIN) { if (!test_bit_inv(domain, perms->adm)) { rc = -ENODEV; -- cgit v1.2.3 From e935cd525af4c6ed2e2c6404aa27ca19c7f39ddb Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Thu, 23 Jul 2026 11:54:53 +0200 Subject: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. Fixes: cfd68b33094e ("s390/zcrypt: Filter admin CPRBs on custom devices") Cc: stable@vger.kernel.org Reported-by: Christian Borntraeger Reviewed-by: Finn Callies Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik --- drivers/s390/crypto/zcrypt_api.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c index 81eefdeae248..ec6a4c2f9f04 100644 --- a/drivers/s390/crypto/zcrypt_api.c +++ b/drivers/s390/crypto/zcrypt_api.c @@ -879,6 +879,7 @@ static long _zcrypt_send_cprb(u32 xflags, struct ap_perms *perms, if (perms != &ap_perms && domain < AP_DOMAINS) { if (ap_msg.flags & AP_MSG_FLAG_ADMIN) { + domain = array_index_nospec(domain, AP_DOMAINS); if (!test_bit_inv(domain, perms->adm)) { rc = -ENODEV; goto out; @@ -1079,6 +1080,7 @@ static long _zcrypt_send_ep11_cprb(u32 xflags, struct ap_perms *perms, if (perms != &ap_perms && domain < AP_DOMAINS) { if (ap_msg.flags & AP_MSG_FLAG_ADMIN) { + domain = array_index_nospec(domain, AP_DOMAINS); if (!test_bit_inv(domain, perms->adm)) { rc = -ENODEV; goto out; -- cgit v1.2.3 From 01476391aecef36a3b789ee844357b22fbc90665 Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Wed, 29 Jul 2026 16:01:34 +0200 Subject: s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey() The helper function _ip_cprb_helper() uses internal buffer memory for building and processing CPRBs. After use this buffer was never scrubbed which could lead to leaving for example clear key material in memory which could be exposed via tricky reuse of this same memory. Extend the _ip_cprb_helper() function with another parameter 'scrub' used to steer scrubbing of this buffer. So now the caller has the opportunity to decide if scrubbing is needed or not. Extend the clear key to secure key token import process in function cca_clr2cipherkey() to tell the helper function from above to scrub the cprb buffer when the clear key value is part of the request data. Add explicit scrubbing on return from function cca_clr2cipherkey() for the random EXOR buffer and the cprb buffer. Overall this cleans the internal used buffer in case of clear key import to prevent sensitive data to get exposed. Fixes: 4bc123b18ce6 ("s390/zcrypt: Add low level functions for CCA AES cipher keys") Cc: stable@vger.kernel.org Reviewed-by: Holger Dengler Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik --- drivers/s390/crypto/zcrypt_ccamisc.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/s390/crypto/zcrypt_ccamisc.c b/drivers/s390/crypto/zcrypt_ccamisc.c index f797786107b9..86d2ee78c9f4 100644 --- a/drivers/s390/crypto/zcrypt_ccamisc.c +++ b/drivers/s390/crypto/zcrypt_ccamisc.c @@ -1015,7 +1015,8 @@ static int _ip_cprb_helper(u16 cardnr, u16 domain, int clr_key_bit_size, u8 *key_token, int *key_token_size, - u32 xflags) + u32 xflags, + bool scrub) { int rc, n; u8 *mem, *ptr; @@ -1155,7 +1156,7 @@ static int _ip_cprb_helper(u16 cardnr, u16 domain, *key_token_size = t->len; out: - free_cprbmem(mem, PARMBSIZE, false, xflags); + free_cprbmem(mem, PARMBSIZE, scrub, xflags); return rc; } @@ -1206,28 +1207,32 @@ int cca_clr2cipherkey(u16 card, u16 dom, u32 keybitsize, u32 keygenflags, * 4/4 COMPLETE the secure cipher key import */ rc = _ip_cprb_helper(card, dom, "AES ", "FIRST ", "MIN3PART", - exorbuf, keybitsize, token, &tokensize, xflags); + exorbuf, keybitsize, token, &tokensize, + xflags, true); if (rc) { ZCRYPT_DBF_ERR("%s clear key import 1/4 with CSNBKPI2 failed, rc=%d\n", __func__, rc); goto out; } rc = _ip_cprb_helper(card, dom, "AES ", "ADD-PART", NULL, - clrkey, keybitsize, token, &tokensize, xflags); + clrkey, keybitsize, token, &tokensize, + xflags, true); if (rc) { ZCRYPT_DBF_ERR("%s clear key import 2/4 with CSNBKPI2 failed, rc=%d\n", __func__, rc); goto out; } rc = _ip_cprb_helper(card, dom, "AES ", "ADD-PART", NULL, - exorbuf, keybitsize, token, &tokensize, xflags); + exorbuf, keybitsize, token, &tokensize, + xflags, true); if (rc) { ZCRYPT_DBF_ERR("%s clear key import 3/4 with CSNBKPI2 failed, rc=%d\n", __func__, rc); goto out; } rc = _ip_cprb_helper(card, dom, "AES ", "COMPLETE", NULL, - NULL, keybitsize, token, &tokensize, xflags); + NULL, keybitsize, token, &tokensize, + xflags, true); if (rc) { ZCRYPT_DBF_ERR("%s clear key import 4/4 with CSNBKPI2 failed, rc=%d\n", __func__, rc); @@ -1244,6 +1249,8 @@ int cca_clr2cipherkey(u16 card, u16 dom, u32 keybitsize, u32 keygenflags, *keybufsize = tokensize; out: + memzero_explicit(exorbuf, sizeof(exorbuf)); + memzero_explicit(mem, CPRB_MEMPOOL_ITEM_SIZE); mempool_free(mem, cprb_mempool); return rc; } -- cgit v1.2.3 From dcba277d119af323c267d1f27f61b868dac62753 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Mon, 27 Jul 2026 16:28:38 +0200 Subject: s390/dasd: Fix path verification interrupted by concurrent dasd_sleep_on_immediatly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When all channel paths to a DASD device are lost and subsequently recovered, the path event handler starts one IO per path via dasd_sleep_on_immediatly() to execute read configuration data (RCD) with high priority. dasd_sleep_on_immediatly() works by terminating the currently running request before inserting the new request. If a concurrent caller, such as the attention handler dasd_eckd_check_attention_work() or the summary unit check handler summary_unit_check_handling_work(), also calls dasd_sleep_on_immediatly() while a path verification RCD is in progress, the RCD gets terminated. The problem is that a terminated request transitions from CLEARED to TERMINATED without going through the normal retry path in __dasd_device_process_ccw_queue. The RCD therefore returns -EIO, and the affected paths remain non-operational after recovery. RCD CQRs used for path verification already carry the DASD_CQR_VERIFY_PATH flag. Extend _dasd_term_running_cqr() to check this flag: instead of terminating such a request, return -EAGAIN. In dasd_sleep_on_immediatly(), loop on -EAGAIN with a short sleep, waiting for the path verification request to complete before inserting the new request. This is consistent with the already indefinite wait_event() that dasd_sleep_on_immediatly() uses for its own request, and all other callers (attention handler, summary unit check handler, reserve/release/steal-lock) benefit automatically without requiring changes. Reviewed-by: Jan Höppner Signed-off-by: Stefan Haberland Link: https://patch.msgid.link/20260727142840.567286-2-sth@linux.ibm.com Signed-off-by: Jens Axboe --- drivers/s390/block/dasd.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 3181c06d91ce..d8d912a3b3fe 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -2511,6 +2512,13 @@ static inline int _dasd_term_running_cqr(struct dasd_device *device) if (list_empty(&device->ccw_queue)) return 0; cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, devlist); + /* + * Path verification requests must not be terminated. They are critical + * for bringing paths back online. Terminating them would cause rc=-EIO + * because CLEARED requests skip the retry path. + */ + if (test_bit(DASD_CQR_VERIFY_PATH, &cqr->flags)) + return -EAGAIN; rc = device->discipline->term_IO(cqr); if (!rc) /* @@ -2535,7 +2543,11 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr) return -EIO; } spin_lock_irq(get_ccwdev_lock(device->cdev)); - rc = _dasd_term_running_cqr(device); + while ((rc = _dasd_term_running_cqr(device)) == -EAGAIN) { + spin_unlock_irq(get_ccwdev_lock(device->cdev)); + msleep(1); + spin_lock_irq(get_ccwdev_lock(device->cdev)); + } if (rc) { spin_unlock_irq(get_ccwdev_lock(device->cdev)); return rc; -- cgit v1.2.3 From 9973026f572db6b67570cadc30942f3014e41079 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jan=20H=C3=B6ppner?= Date: Mon, 27 Jul 2026 16:28:39 +0200 Subject: s390/dasd: Fix potential NULL pointer dereference MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator. Fixes: 91dc4a197569 ("s390/dasd: Add new ioctl to release space") Cc: stable@vger.kernel.org # v5.3+ Reported-by: Vasily Gorbik Acked-by: Eduard Shishkin Reviewed-by: Stefan Haberland Signed-off-by: Jan Höppner Signed-off-by: Stefan Haberland Link: https://patch.msgid.link/20260727142840.567286-3-sth@linux.ibm.com Signed-off-by: Jens Axboe --- drivers/s390/block/dasd_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index c85ee42732a3..e5b8b413f5ab 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -324,7 +324,7 @@ out_err: static int dasd_release_space(struct dasd_device *device, struct format_data_t *rdata) { - if (!device->discipline->is_ese && !device->discipline->is_ese(device)) + if (!device->discipline->is_ese || !device->discipline->is_ese(device)) return -ENOTSUPP; if (!device->discipline->release_space) return -ENOTSUPP; -- cgit v1.2.3 From 7f40b346462f563a0d6e841a77b5163d2a882a04 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Mon, 27 Jul 2026 16:28:40 +0200 Subject: s390/dasd: Fix undersized format-check buffer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fmt_buffer_size in dasd_eckd_check_device_format() is declared as int, even though one of the multiplicands, sizeof(struct eckd_count), is a size_t. The expression trkcount * rpt_max * sizeof(struct eckd_count) is therefore correctly evaluated at 64-bit width, but the result is silently truncated when it is stored back into the 32-bit fmt_buffer_size variable. For a sufficiently large track range (start_unit/stop_unit are caller-controlled) this truncation yields a buffer size far smaller than the number of tracks actually requested. kzalloc() then succeeds with an undersized allocation, while the subsequent channel program build still operates on the untruncated track count and writes past the end of that buffer. Compute the buffer size with check_mul_overflow() and keep it in a size_t, so that a value that no longer fits results in -EINVAL instead of a silently truncated allocation size. Fixes: 8fd575200db5 ("s390/dasd: Add new ioctl BIODASDCHECKFMT") Cc: stable@vger.kernel.org #4.7 Reviewed-by: Jan Höppner Signed-off-by: Stefan Haberland Link: https://patch.msgid.link/20260727142840.567286-4-sth@linux.ibm.com Signed-off-by: Jens Axboe --- drivers/s390/block/dasd_eckd.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 74fe73b5738a..d356a9f8f016 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -3475,11 +3476,11 @@ static int dasd_eckd_check_device_format(struct dasd_device *base, { struct dasd_eckd_private *private = base->private; struct eckd_count *fmt_buffer; - struct irb irb; + size_t fmt_buffer_size; + unsigned int trkcount; int rpt_max, rpt_exp; - int fmt_buffer_size; + struct irb irb; int trk_per_cyl; - int trkcount; int tpm = 0; int rc; @@ -3490,7 +3491,9 @@ static int dasd_eckd_check_device_format(struct dasd_device *base, rpt_exp = recs_per_track(&private->rdc_data, 0, cdata->expect.blksize); trkcount = cdata->expect.stop_unit - cdata->expect.start_unit + 1; - fmt_buffer_size = trkcount * rpt_max * sizeof(struct eckd_count); + if (check_mul_overflow(trkcount, rpt_max, &fmt_buffer_size) || + check_mul_overflow(fmt_buffer_size, sizeof(struct eckd_count), &fmt_buffer_size)) + return -EINVAL; fmt_buffer = kzalloc(fmt_buffer_size, GFP_KERNEL | GFP_DMA); if (!fmt_buffer) -- cgit v1.2.3 From 5cb5c2f4a8373eb4c8fdbfdc857bb28f28f71fe0 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsburskii Date: Wed, 22 Jul 2026 23:56:46 +0000 Subject: mshv: Use kfree_rcu in mshv_portid_free mshv_portid_free() uses synchronize_rcu() followed by kfree() to reclaim port table entries. This blocks the caller until a full RCU grace period elapses, which is unnecessary since the same module already uses the non-blocking kfree_rcu() pattern in mshv_port_table_fini(). Replace with kfree_rcu() to avoid the blocking wait and keep the reclamation strategy consistent across the file. Signed-off-by: Stanislav Kinsburskii Reviewed-by: Anirudh Rayabharam (Microsoft) Signed-off-by: Wei Liu --- drivers/hv/mshv_portid_table.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/hv/mshv_portid_table.c b/drivers/hv/mshv_portid_table.c index 6f59b3e37624..0d632507ed21 100644 --- a/drivers/hv/mshv_portid_table.c +++ b/drivers/hv/mshv_portid_table.c @@ -62,8 +62,7 @@ mshv_portid_free(int port_id) WARN_ON(!info); idr_unlock(&port_table_idr); - synchronize_rcu(); - kfree(info); + kfree_rcu(info, portbl_rcu); } int -- cgit v1.2.3 From 0762262ac3e70f65b3bb843fe892f8bac1562d08 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsburskii Date: Thu, 7 May 2026 15:43:15 +0000 Subject: mshv: Fix race in mshv_irqfd_deassign mshv_irqfd_deactivate() and the hlist traversal of pt_irqfds_list require pt->pt_irqfds_lock to be held, but mshv_irqfd_deassign() omits it. This races with the EPOLLHUP path in mshv_irqfd_wakeup(), which does take the lock before calling mshv_irqfd_deactivate(). Additionally, mshv_irqfd_deactivate() uses hlist_del() which poisons the node pointers rather than resetting them. Since mshv_irqfd_is_active() relies on hlist_unhashed() (checks pprev == NULL), a poisoned node still appears active. If a concurrent path calls mshv_irqfd_deactivate() again on the same irqfd, the guard fails to prevent a double hlist_del() on poisoned pointers. Fix both issues: - Add the missing spin_lock_irq/spin_unlock_irq around the list traversal in mshv_irqfd_deassign(), matching mshv_irqfd_release(). - Use hlist_del_init() instead of hlist_del() so the node is properly marked as unhashed after removal, making the is_active guard reliable. Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii Reviewed-by: Anirudh Rayabharam (Microsoft) Signed-off-by: Wei Liu --- drivers/hv/mshv_eventfd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/hv/mshv_eventfd.c b/drivers/hv/mshv_eventfd.c index 90959f639dc3..5995a62aff8d 100644 --- a/drivers/hv/mshv_eventfd.c +++ b/drivers/hv/mshv_eventfd.c @@ -284,7 +284,7 @@ static void mshv_irqfd_deactivate(struct mshv_irqfd *irqfd) if (!mshv_irqfd_is_active(irqfd)) return; - hlist_del(&irqfd->irqfd_hnode); + hlist_del_init(&irqfd->irqfd_hnode); queue_work(irqfd_cleanup_wq, &irqfd->irqfd_shutdown); } @@ -541,13 +541,14 @@ static int mshv_irqfd_deassign(struct mshv_partition *pt, if (IS_ERR(eventfd)) return PTR_ERR(eventfd); + spin_lock_irq(&pt->pt_irqfds_lock); hlist_for_each_entry_safe(irqfd, n, &pt->pt_irqfds_list, irqfd_hnode) { if (irqfd->irqfd_eventfd_ctx == eventfd && irqfd->irqfd_irqnum == args->gsi) - mshv_irqfd_deactivate(irqfd); } + spin_unlock_irq(&pt->pt_irqfds_lock); eventfd_ctx_put(eventfd); -- cgit v1.2.3 From 0289a67cd70bf9d3807e289f4efd643e16a6c6b4 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsburskii Date: Thu, 7 May 2026 15:43:43 +0000 Subject: mshv: Fix level-triggered check on uninitialized data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In mshv_irqfd_assign(), the level-triggered validation for resample irqfds checks irqfd_lapic_irq.lapic_control.level_triggered before mshv_irqfd_update() has populated the field. Since the irqfd struct is zero-allocated, level_triggered is always 0 at that point, causing the check to always reject resample irqfds with -EINVAL. This makes level-triggered interrupt resampling — used to avoid interrupt storms with assigned devices — completely non-functional. Move the check after the mshv_irqfd_update() call, which resolves the IRQ routing entry and populates irqfd_lapic_irq with the actual trigger mode. Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii Reviewed-by: Anirudh Rayabharam (Microsoft) Signed-off-by: Wei Liu --- drivers/hv/mshv_eventfd.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/drivers/hv/mshv_eventfd.c b/drivers/hv/mshv_eventfd.c index 5995a62aff8d..047e5bd43238 100644 --- a/drivers/hv/mshv_eventfd.c +++ b/drivers/hv/mshv_eventfd.c @@ -473,6 +473,19 @@ static int mshv_irqfd_assign(struct mshv_partition *pt, init_poll_funcptr(&irqfd->irqfd_polltbl, mshv_irqfd_queue_proc); spin_lock_irq(&pt->pt_irqfds_lock); + ret = 0; + hlist_for_each_entry(tmp, &pt->pt_irqfds_list, irqfd_hnode) { + if (irqfd->irqfd_eventfd_ctx != tmp->irqfd_eventfd_ctx) + continue; + /* This fd is used for another irq already. */ + ret = -EBUSY; + spin_unlock_irq(&pt->pt_irqfds_lock); + goto fail; + } + + idx = srcu_read_lock(&pt->pt_irq_srcu); + mshv_irqfd_update(pt, irqfd); + #if IS_ENABLED(CONFIG_X86) if (args->flags & BIT(MSHV_IRQFD_BIT_RESAMPLE) && !irqfd->irqfd_lapic_irq.lapic_control.level_triggered) { @@ -481,22 +494,12 @@ static int mshv_irqfd_assign(struct mshv_partition *pt, * Otherwise return with failure */ spin_unlock_irq(&pt->pt_irqfds_lock); + srcu_read_unlock(&pt->pt_irq_srcu, idx); ret = -EINVAL; goto fail; } #endif - ret = 0; - hlist_for_each_entry(tmp, &pt->pt_irqfds_list, irqfd_hnode) { - if (irqfd->irqfd_eventfd_ctx != tmp->irqfd_eventfd_ctx) - continue; - /* This fd is used for another irq already. */ - ret = -EBUSY; - spin_unlock_irq(&pt->pt_irqfds_lock); - goto fail; - } - idx = srcu_read_lock(&pt->pt_irq_srcu); - mshv_irqfd_update(pt, irqfd); hlist_add_head(&irqfd->irqfd_hnode, &pt->pt_irqfds_list); spin_unlock_irq(&pt->pt_irqfds_lock); -- cgit v1.2.3 From f546be6a19d24d02be576d8617cb26c7acb61594 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsburskii Date: Thu, 7 May 2026 15:44:37 +0000 Subject: mshv: Fix missing error code on VP allocation failure In mshv_partition_ioctl_create_vp(), when kzalloc for the VP struct fails, the code jumps to the cleanup path without setting ret. At that point ret is 0 from the preceding successful mshv_vp_stats_map() call, so the function returns success to userspace despite having failed to create the VP. No fd is installed and no VP is registered in pt_vp_array, but userspace has no way to know the operation failed. Set ret to -ENOMEM before jumping to the cleanup path. Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii Reviewed-by: Anirudh Rayabharam (Microsoft) Signed-off-by: Wei Liu --- drivers/hv/mshv_root_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hv/mshv_root_main.c b/drivers/hv/mshv_root_main.c index 146726cc4e9b..644f9b10cbba 100644 --- a/drivers/hv/mshv_root_main.c +++ b/drivers/hv/mshv_root_main.c @@ -1117,8 +1117,10 @@ mshv_partition_ioctl_create_vp(struct mshv_partition *partition, goto unmap_ghcb_page; vp = kzalloc_obj(*vp); - if (!vp) + if (!vp) { + ret = -ENOMEM; goto unmap_stats_pages; + } vp->vp_partition = mshv_partition_get(partition); if (!vp->vp_partition) { -- cgit v1.2.3 From b098dc869219c15dc49bf9cf63fb5fc1481d3373 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsburskii Date: Thu, 23 Jul 2026 00:28:11 +0000 Subject: mshv: Order pt_vp_array publish against irqfd assertion path mshv_partition_ioctl_create_vp() initialises a VP struct (allocations, mutex_init, init_waitqueue_head, page mappings) and then publishes the pointer into partition->pt_vp_array. Several ISR paths read this array locklessly: the intercept ISR, the two scheduler ISRs, and mshv_try_assert_irq_fast() on the irqfd fast path. Of these, only mshv_try_assert_irq_fast() can structurally race the publish. It runs from an eventfd waker without holding pt_mutex, and MSHV_IRQFD does not require the target lapic_apic_id (== vp_index) to refer to an existing VP at registration time. A user can therefore register an irqfd targeting a yet-to-be-created VP, then trigger mshv_try_assert_irq_fast() concurrently with MSHV_CREATE_VP for the same index. On weakly-ordered architectures the reader can observe a non-NULL pointer in pt_vp_array before the initialising stores to the VP struct become visible, leading to use of partially-initialised fields (e.g. vp_register_page). The other ISR readers cannot reach this race: the hypervisor will not generate intercept or scheduler messages for a VP that has never been told to run, and the user can only call MSHV_RUN_VP on the VP fd returned by MSHV_CREATE_VP, which by construction is returned after the publish. Leave those readers as plain loads. Use smp_store_release() in mshv_partition_ioctl_create_vp() to publish the pointer, and pair it with smp_load_acquire() in mshv_try_assert_irq_fast(). On x86 these compile to plain accesses under TSO; on ARM64 they emit one-instruction acquire/release barriers, acceptable on this fast path. The destroy-side path (destroy_partition() clearing pt_vp_array[i] to NULL after kfree(vp)) has a separate ordering and lifetime concern that is out of scope here. Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii Reviewed-by: Anirudh Rayabharam (Microsoft) Signed-off-by: Wei Liu --- drivers/hv/mshv_eventfd.c | 9 ++++++++- drivers/hv/mshv_root_main.c | 8 +++++++- 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/hv/mshv_eventfd.c b/drivers/hv/mshv_eventfd.c index 047e5bd43238..06aef99c8298 100644 --- a/drivers/hv/mshv_eventfd.c +++ b/drivers/hv/mshv_eventfd.c @@ -169,7 +169,14 @@ static int mshv_try_assert_irq_fast(struct mshv_irqfd *irqfd) return -EOPNOTSUPP; #endif - vp = partition->pt_vp_array[irq->lapic_apic_id]; + /* + * Pairs with smp_store_release() in mshv_partition_ioctl_create_vp(). + * MSHV_IRQFD does not require the target lapic_apic_id to refer to an + * existing VP, so this read can race a concurrent VP creation; the + * acquire ensures that a non-NULL pointer implies the VP's + * initialising stores are visible. + */ + vp = smp_load_acquire(&partition->pt_vp_array[irq->lapic_apic_id]); if (!vp->vp_register_page) return -EOPNOTSUPP; diff --git a/drivers/hv/mshv_root_main.c b/drivers/hv/mshv_root_main.c index 644f9b10cbba..8a15448e2ace 100644 --- a/drivers/hv/mshv_root_main.c +++ b/drivers/hv/mshv_root_main.c @@ -1157,7 +1157,13 @@ mshv_partition_ioctl_create_vp(struct mshv_partition *partition, /* already exclusive with the partition mutex for all ioctls */ partition->pt_vp_count++; - partition->pt_vp_array[args.vp_index] = vp; + /* + * Pairs with smp_load_acquire() in mshv_try_assert_irq_fast(), which + * can run concurrently from an irqfd waker without holding pt_mutex. + * The release ensures the VP's initialising stores are visible to any + * reader that observes a non-NULL pointer in pt_vp_array. + */ + smp_store_release(&partition->pt_vp_array[args.vp_index], vp); goto out; -- cgit v1.2.3 From 92d0593128023cf93ae61b7728dcc3062f8d514f Mon Sep 17 00:00:00 2001 From: Hardik Garg Date: Fri, 17 Jul 2026 00:18:37 +0000 Subject: Drivers: hv: vmbus: add VTL2 redirect connection ID VMBus sends CHANNELMSG_INITIATE_CONTACT through a Hyper-V message connection ID. Older protocol versions use VMBUS_MESSAGE_CONNECTION_ID, while protocol version 5.0 and newer normally use VMBUS_MESSAGE_CONNECTION_ID_4. For a VTL2 kernel using VMBus protocol 5.0 or newer, the host may expect INITIATE_CONTACT on either the redirect connection ID or VMBUS_MESSAGE_CONNECTION_ID_4. There is no capability indication that identifies which ID is active, so the driver must determine it at runtime. During VMBus negotiation, the redirect ID is tried first because it is used by VTL2 configurations with VMBus redirection enabled. If the redirect ID is unavailable, the host rejects it synchronously with HV_STATUS_INVALID_CONNECTION_ID, allowing fallback to the standard ID. Return a distinct error for an invalid Initiate Contact connection ID so this fallback does not mask other post-message failures or protocol-version rejections. Preserve the existing connection ID selection for older protocol versions or when running below VTL2. Signed-off-by: Hardik Garg Reviewed-by: Tianyu Lan Reviewed-by: Saurabh Sengar Reviewed-by: Naman Jain Reviewed-by: Michael Kelley Signed-off-by: Wei Liu --- drivers/hv/connection.c | 47 ++++++++++++++++++++++++++++------------------- drivers/hv/hyperv_vmbus.h | 2 ++ 2 files changed, 30 insertions(+), 19 deletions(-) diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index b5b322ce16df..0fd50d4cb573 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -72,7 +72,8 @@ module_param(max_version, uint, S_IRUGO); MODULE_PARM_DESC(max_version, "Maximal VMBus protocol version which can be negotiated"); -int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version) +static int vmbus_try_connection_id(struct vmbus_channel_msginfo *msginfo, + u32 version, u32 connection_id) { int ret = 0; struct vmbus_channel_initiate_contact *msg; @@ -87,20 +88,20 @@ int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version) msg->vmbus_version_requested = version; /* - * VMBus protocol 5.0 (VERSION_WIN10_V5) and higher require that we must - * use VMBUS_MESSAGE_CONNECTION_ID_4 for the Initiate Contact Message, - * and for subsequent messages, we must use the Message Connection ID - * field in the host-returned Version Response Message. And, with - * VERSION_WIN10_V5 and higher, we don't use msg->interrupt_page, but we - * tell the host explicitly that we still use VMBUS_MESSAGE_SINT(2) for - * compatibility. + * For VMBus protocol 5.0 (VERSION_WIN10_V5) and higher, use the + * caller-supplied connection_id for the Initiate Contact message so + * the caller can implement the required retry scheme. For subsequent + * messages, use the Message Connection ID field in the host-returned + * Version Response message. With VERSION_WIN10_V5 and higher, we don't + * use msg->interrupt_page, but tell the host explicitly that we still + * use VMBUS_MESSAGE_SINT(2) for compatibility. * * On old hosts, we should always use VMBUS_MESSAGE_CONNECTION_ID (1). */ if (version >= VERSION_WIN10_V5) { msg->msg_sint = VMBUS_MESSAGE_SINT; msg->msg_vtl = ms_hyperv.vtl; - vmbus_connection.msg_conn_id = VMBUS_MESSAGE_CONNECTION_ID_4; + vmbus_connection.msg_conn_id = connection_id; } else { msg->interrupt_page = virt_to_phys(vmbus_connection.int_page); vmbus_connection.msg_conn_id = VMBUS_MESSAGE_CONNECTION_ID; @@ -165,6 +166,22 @@ int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version) return ret; } +int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version) +{ + int ret; + + /* Try the redirect ID first for VTL2 with VMBus protocol 5.0+. */ + if (version >= VERSION_WIN10_V5 && ms_hyperv.vtl == 2) { + ret = vmbus_try_connection_id(msginfo, version, + VMBUS_MESSAGE_CONNECTION_ID_REDIRECT); + if (ret != -ENXIO) + return ret; + } + + return vmbus_try_connection_id(msginfo, version, + VMBUS_MESSAGE_CONNECTION_ID_4); +} + /* * vmbus_connect - Sends a connect request on the partition service connection */ @@ -457,18 +474,10 @@ int vmbus_post_msg(void *buffer, size_t buflen, bool can_sleep) switch (ret) { case HV_STATUS_INVALID_CONNECTION_ID: - /* - * See vmbus_negotiate_version(): VMBus protocol 5.0 - * and higher require that we must use - * VMBUS_MESSAGE_CONNECTION_ID_4 for the Initiate - * Contact message, but on old hosts that only - * support VMBus protocol 4.0 or lower, here we get - * HV_STATUS_INVALID_CONNECTION_ID and we should - * return an error immediately without retrying. - */ + /* Allow INITIATE_CONTACT to try another connection ID. */ hdr = buffer; if (hdr->msgtype == CHANNELMSG_INITIATE_CONTACT) - return -EINVAL; + return -ENXIO; /* * We could get this if we send messages too * frequently. diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h index eb8bdd8bb1f5..33923621a5a3 100644 --- a/drivers/hv/hyperv_vmbus.h +++ b/drivers/hv/hyperv_vmbus.h @@ -110,6 +110,8 @@ struct hv_input_post_message { enum { VMBUS_MESSAGE_CONNECTION_ID = 1, VMBUS_MESSAGE_CONNECTION_ID_4 = 4, + /* VTL2 redirect connection ID for INITIATE_CONTACT. */ + VMBUS_MESSAGE_CONNECTION_ID_REDIRECT = 0x800074, VMBUS_MESSAGE_PORT_ID = 1, VMBUS_EVENT_CONNECTION_ID = 2, VMBUS_EVENT_PORT_ID = 2, -- cgit v1.2.3 From 72e3b0311aa90568a4b42a64445d1d3e1dc5a34d Mon Sep 17 00:00:00 2001 From: Stanislav Kinsburskii Date: Thu, 7 May 2026 15:44:32 +0000 Subject: mshv: Publish VP to pt_vp_array before installing the file descriptor MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit mshv_partition_ioctl_create_vp() called anon_inode_getfd() before publishing the new VP into partition->pt_vp_array. anon_inode_getfd() includes fd_install(), so the fd was live in current->files before the publish ran. A concurrent MSHV_RUN_VP ioctl on that fd does not serialise against the in-progress MSHV_CREATE_VP — it takes vp->vp_mutex, not the partition mutex. Once the VP starts running and traps, mshv_intercept_isr() can look up partition->pt_vp_array[vp_index] and observe NULL, silently dropping the intercept message. Split the fd creation: reserve an fd with get_unused_fd_flags(), create the file with anon_inode_getfile(), publish the VP via smp_store_release(), and finally call fd_install() as the userspace-visibility commit point. Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii Reviewed-by: Anirudh Rayabharam (Microsoft) Signed-off-by: Wei Liu --- drivers/hv/mshv_root_main.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) diff --git a/drivers/hv/mshv_root_main.c b/drivers/hv/mshv_root_main.c index 8a15448e2ace..cc2cfce2aefd 100644 --- a/drivers/hv/mshv_root_main.c +++ b/drivers/hv/mshv_root_main.c @@ -1072,6 +1072,8 @@ mshv_partition_ioctl_create_vp(struct mshv_partition *partition, struct mshv_vp *vp; struct page *intercept_msg_page, *register_page, *ghcb_page; struct hv_stats_page *stats_pages[2]; + struct file *file; + int fd; long ret; if (copy_from_user(&args, arg, sizeof(args))) @@ -1146,14 +1148,18 @@ mshv_partition_ioctl_create_vp(struct mshv_partition *partition, if (ret) goto put_partition; - /* - * Keep anon_inode_getfd last: it installs fd in the file struct and - * thus makes the state accessible in user space. - */ - ret = anon_inode_getfd("mshv_vp", &mshv_vp_fops, vp, - O_RDWR | O_CLOEXEC); - if (ret < 0) + fd = get_unused_fd_flags(O_RDWR | O_CLOEXEC); + if (fd < 0) { + ret = fd; goto remove_debugfs_vp; + } + + file = anon_inode_getfile("mshv_vp", &mshv_vp_fops, vp, + O_RDWR | O_CLOEXEC); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto put_unused_vp_fd; + } /* already exclusive with the partition mutex for all ioctls */ partition->pt_vp_count++; @@ -1165,8 +1171,17 @@ mshv_partition_ioctl_create_vp(struct mshv_partition *partition, */ smp_store_release(&partition->pt_vp_array[args.vp_index], vp); + /* + * fd_install() is the userspace-visibility commit point. Must be the + * last operation that can fail or be observed. + */ + fd_install(fd, file); + ret = fd; + goto out; +put_unused_vp_fd: + put_unused_fd(fd); remove_debugfs_vp: mshv_debugfs_vp_remove(vp); put_partition: -- cgit v1.2.3 From 22dfdc17ceadd2783a609947af621a7f697b7765 Mon Sep 17 00:00:00 2001 From: Yi Xie Date: Thu, 9 Jul 2026 10:19:47 +0800 Subject: mshv_vtl: bounds-check cpu index in vtl mmap fault handler cpu is taken from pgoff & 0xffff. cpu_online() does not reject cpu >= nr_cpu_ids, and per_cpu_ptr() can then walk off __per_cpu_offset. Signed-off-by: Yi Xie Reviewed-by: Naman Jain Signed-off-by: Wei Liu --- drivers/hv/mshv_vtl_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/mshv_vtl_main.c b/drivers/hv/mshv_vtl_main.c index 5ba1efb3b4e7..6e3c11c68171 100644 --- a/drivers/hv/mshv_vtl_main.c +++ b/drivers/hv/mshv_vtl_main.c @@ -802,7 +802,7 @@ static vm_fault_t mshv_vtl_fault(struct vm_fault *vmf) int cpu = vmf->pgoff & MSHV_PG_OFF_CPU_MASK; int real_off = vmf->pgoff >> MSHV_REAL_OFF_SHIFT; - if (!cpu_online(cpu)) + if (cpu >= nr_cpu_ids || !cpu_online(cpu)) return VM_FAULT_SIGBUS; /* * CPU Hotplug is not supported in VTL2 in OpenHCL, where this kernel driver exists. -- cgit v1.2.3 From 260b20d9b78bf002f89088fb62d60e8dee98f6f8 Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Fri, 31 Jul 2026 23:16:46 +0900 Subject: ring-buffer: Fix subbuf_ids memory leak in rb_allocate_cpu_buffer() error path In rb_allocate_cpu_buffer(), cpu_buffer->subbuf_ids is allocated using kcalloc() when buffer->remote is non-NULL. If a subsequent page allocation fails (e.g., ring_buffer_desc_page() returns NULL or rb_allocate_pages() fails), execution jumps to fail_free_reader. While __free(kfree) automatically frees the outer cpu_buffer structure at scope exit, kfree(cpu_buffer) does not recursively free nested heap pointers such as cpu_buffer->subbuf_ids, resulting in a memory leak. Fix this by explicitly freeing cpu_buffer->subbuf_ids in the fail_free_reader error unwinding path when cpu_buffer->remote is set. Link: https://patch.msgid.link/178550740672.380917.6067449683620196150.stgit@devnote2 Fixes: 2e67fabd8b77 ("ring-buffer: Introduce ring-buffer remotes") Assisted-by: Antigravity:gemini-3.6-flash Signed-off-by: Masami Hiramatsu (Google) Reviewed-by: Vincent Donnefort Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 78d3875a47a5..8e2485bb3aa8 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2599,6 +2599,7 @@ rb_allocate_cpu_buffer(struct trace_buffer *buffer, long nr_pages, int cpu) return_ptr(cpu_buffer); fail_free_reader: + kfree(cpu_buffer->subbuf_ids); free_buffer_page(cpu_buffer->reader_page); return NULL; -- cgit v1.2.3 From 075b74841bd0065a3bda3440873c747938e69b68 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 2 Aug 2026 16:24:24 -0700 Subject: Linux 7.2-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 060834cd0a4d..902f3f3d54b7 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 7 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Baby Opossum Posse # *DOCUMENTATION* -- cgit v1.2.3 From c87b4ba09702762ea69187561bd4d76ae602f8bd Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 3 Aug 2026 05:40:34 -0700 Subject: spi: dw: Introduce spi_frf and STD_SPI The DW APB SSI controllers of v4.x and newer and DW AHB SSI controllers supports enhanced SPI modes which can be defined from SPI_FRF of DW_SPI_CTRLR0 register. Without enhanced mode, these controllers will work in the standard spi mode. Signed-off-by: Sudip Mukherjee Co-developed-by: Changhuang Liang Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-2-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 13 ++++++++++++- drivers/spi/spi-dw.h | 7 +++++++ 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index ad8aad958c76..2c52209c9095 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -330,6 +330,16 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, /* CTRLR0[11:10] Transfer Mode */ cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_TMOD_MASK, cfg->tmode); + if (dw_spi_ver_is_ge(dws, HSSI, 103A)) { + cr0 &= ~DW_HSSI_CTRLR0_SPI_FRF_MASK; + cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_SPI_FRF_MASK, + cfg->spi_frf); + } else if (dw_spi_ver_is_ge(dws, PSSI, 400A)) { + cr0 &= ~DW_PSSI_CTRLR0_SPI_FRF_MASK; + cr0 |= FIELD_PREP(DW_PSSI_CTRLR0_SPI_FRF_MASK, + cfg->spi_frf); + } + dw_writel(dws, DW_SPI_CTRLR0, cr0); if (spi_controller_is_target(dws->ctlr)) @@ -422,6 +432,7 @@ static int dw_spi_transfer_one(struct spi_controller *ctlr, .tmode = DW_SPI_CTRLR0_TMOD_TR, .dfs = transfer->bits_per_word, .freq = transfer->speed_hz, + .spi_frf = DW_SPI_CTRLR0_SPI_FRF_STD_SPI, }; int ret; @@ -677,7 +688,7 @@ static void dw_spi_stop_mem_op(struct dw_spi *dws, struct spi_device *spi) static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) { struct dw_spi *dws = spi_controller_get_devdata(mem->spi->controller); - struct dw_spi_cfg cfg; + struct dw_spi_cfg cfg = {0}; unsigned long flags; int ret; diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 2f2debc64e73..19cf1b1a5d4f 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -17,6 +17,9 @@ /* Synopsys DW SSI component versions (FourCC sequence) */ #define DW_HSSI_102A 0x3130322a +#define DW_HSSI_103A 0x3130332a +#define DW_HSSI_200A 0x3230302a +#define DW_PSSI_400A 0x3430302a /* DW SSI IP-core ID and version check helpers */ #define dw_spi_ip_is(_dws, _ip) \ @@ -94,6 +97,9 @@ #define DW_HSSI_CTRLR0_TMOD_MASK GENMASK(11, 10) #define DW_HSSI_CTRLR0_SRL BIT(13) #define DW_HSSI_CTRLR0_MST BIT(31) +#define DW_HSSI_CTRLR0_SPI_FRF_MASK GENMASK(23, 22) +#define DW_PSSI_CTRLR0_SPI_FRF_MASK GENMASK(22, 21) +#define DW_SPI_CTRLR0_SPI_FRF_STD_SPI 0x0 /* Bit fields in CTRLR1 */ #define DW_SPI_NDF_MASK GENMASK(15, 0) @@ -135,6 +141,7 @@ struct dw_spi_cfg { u8 dfs; u32 ndf; u32 freq; + u8 spi_frf; }; struct dw_spi; -- cgit v1.2.3 From 607687a869e60333d7a6cc3621c406b6e9dc2af8 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 3 Aug 2026 05:40:35 -0700 Subject: spi: dw: update SPI_CTRLR0 register If the SPI transfer is being done in enhanced mode then SPI_CTRLR0 register needs to be updated to mention the instruction length, address length, address and instruction transfer format, wait cycles. And, we also need to enable clock stretching. Signed-off-by: Sudip Mukherjee Co-developed-by: Changhuang Liang Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-3-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 15 ++++++++++++--- drivers/spi/spi-dw.h | 17 ++++++++++++++++- 2 files changed, 28 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index 2c52209c9095..1cdd6cc6c892 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -313,7 +313,7 @@ static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi) } void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, - struct dw_spi_cfg *cfg) + struct dw_spi_cfg *cfg, struct dw_spi_enh_cfg *enh_cfg) { struct dw_spi_chip_data *chip = spi_get_ctldata(spi); u32 cr0 = chip->cr0; @@ -363,6 +363,15 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, dw_writel(dws, DW_SPI_RX_SAMPLE_DLY, chip->rx_sample_dly); dws->cur_rx_sample_dly = chip->rx_sample_dly; } + + if (enh_cfg) { + cr0 = DW_SPI_ENH_CTRLR0_CLK_STRETCH_EN; + cr0 |= FIELD_PREP(DW_SPI_ENH_CTRLR0_WAIT_CYCLE_MASK, enh_cfg->wait_c); + cr0 |= FIELD_PREP(DW_SPI_ENH_CTRLR0_INST_L_MASK, enh_cfg->inst_l); + cr0 |= FIELD_PREP(DW_SPI_ENH_CTRLR0_ADDR_L_MASK, enh_cfg->addr_l); + cr0 |= FIELD_PREP(DW_SPI_ENH_CTRLR0_TRANS_TYPE_MASK, enh_cfg->trans_t); + dw_writel(dws, DW_SPI_SPI_CTRLR0, cr0); + } } EXPORT_SYMBOL_NS_GPL(dw_spi_update_config, "SPI_DW_CORE"); @@ -448,7 +457,7 @@ static int dw_spi_transfer_one(struct spi_controller *ctlr, dw_spi_enable_chip(dws, 0); - dw_spi_update_config(dws, spi, &cfg); + dw_spi_update_config(dws, spi, &cfg, NULL); transfer->effective_speed_hz = dws->current_freq; @@ -715,7 +724,7 @@ static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) dw_spi_enable_chip(dws, 0); - dw_spi_update_config(dws, mem->spi, &cfg); + dw_spi_update_config(dws, mem->spi, &cfg, NULL); dw_spi_mask_intr(dws, 0xff); diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 19cf1b1a5d4f..16a8c7ab7364 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -63,6 +63,7 @@ #define DW_SPI_VERSION 0x5c #define DW_SPI_DR 0x60 #define DW_SPI_RX_SAMPLE_DLY 0xf0 +#define DW_SPI_SPI_CTRLR0 0xf4 #define DW_SPI_CS_OVERRIDE 0xf4 /* Bit fields in CTRLR0 (DWC APB SSI) */ @@ -127,6 +128,13 @@ #define DW_SPI_DMACR_RDMAE BIT(0) #define DW_SPI_DMACR_TDMAE BIT(1) +/* Bit fields in SPI_CTRLR0 */ +#define DW_SPI_ENH_CTRLR0_CLK_STRETCH_EN BIT(30) +#define DW_SPI_ENH_CTRLR0_WAIT_CYCLE_MASK GENMASK(15, 11) +#define DW_SPI_ENH_CTRLR0_INST_L_MASK GENMASK(9, 8) +#define DW_SPI_ENH_CTRLR0_ADDR_L_MASK GENMASK(5, 2) +#define DW_SPI_ENH_CTRLR0_TRANS_TYPE_MASK GENMASK(1, 0) + /* Mem/DMA operations helpers */ #define DW_SPI_WAIT_RETRIES 5 #define DW_SPI_BUF_SIZE \ @@ -144,6 +152,13 @@ struct dw_spi_cfg { u8 spi_frf; }; +struct dw_spi_enh_cfg { + u8 wait_c; + u8 inst_l; + u8 addr_l; + u8 trans_t; +}; + struct dw_spi; struct dw_spi_dma_ops { int (*dma_init)(struct device *dev, struct dw_spi *dws); @@ -294,7 +309,7 @@ static inline void dw_spi_shutdown_chip(struct dw_spi *dws) extern void dw_spi_set_cs(struct spi_device *spi, bool enable); extern void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, - struct dw_spi_cfg *cfg); + struct dw_spi_cfg *cfg, struct dw_spi_enh_cfg *enh_cfg); extern int dw_spi_check_status(struct dw_spi *dws, bool raw); extern int dw_spi_add_controller(struct device *dev, struct dw_spi *dws); extern void dw_spi_remove_controller(struct dw_spi *dws); -- cgit v1.2.3 From f6b36efcbe01c880bd1962f95725c8e54fca065b Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 3 Aug 2026 05:40:36 -0700 Subject: spi: dw: add check for support of enhanced spi Before doing the mem op, spi controller will be queried about the buswidths it supports. Add the single/dual/quad/octal if the controller has the DW_SPI_CAP_EMODE capability. The DW_SPI_CAP_EMODE capability will be enabled in a later patch. Signed-off-by: Sudip Mukherjee Co-developed-by: Changhuang Liang Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-4-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 34 +++++++++++++++++++++++++++++++++- drivers/spi/spi-dw.h | 1 + 2 files changed, 34 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index 1cdd6cc6c892..e720d4276de1 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -518,6 +518,35 @@ static int dw_spi_adjust_mem_op_size(struct spi_mem *mem, struct spi_mem_op *op) return 0; } +static bool dw_spi_supports_enh_mem_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + if (op->addr.nbytes != 0 && op->addr.buswidth != 1 && + op->addr.buswidth != op->data.buswidth) + return false; + + if (op->addr.nbytes >= 8) + return false; + + if (op->cmd.buswidth != 1 && op->cmd.buswidth != op->addr.buswidth && + op->cmd.buswidth != op->data.buswidth) + return false; + + if (op->dummy.nbytes && !op->dummy.buswidth) + return false; + + if (op->dummy.nbytes != 0 && op->data.dir == SPI_MEM_DATA_OUT) + return false; + + /* WAIT_CYCLES is a 5-bit field in SPI_CTRLR0 */ + if (op->dummy.nbytes != 0 && + op->dummy.nbytes * BITS_PER_BYTE / op->dummy.buswidth > + FIELD_MAX(DW_SPI_ENH_CTRLR0_WAIT_CYCLE_MASK)) + return false; + + return spi_mem_default_supports_op(mem, op); +} + static bool dw_spi_supports_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) { @@ -800,7 +829,10 @@ static void dw_spi_init_mem_ops(struct dw_spi *dws) if (!dws->mem_ops.exec_op && !(dws->caps & DW_SPI_CAP_CS_OVERRIDE) && !dws->set_cs) { dws->mem_ops.adjust_op_size = dw_spi_adjust_mem_op_size; - dws->mem_ops.supports_op = dw_spi_supports_mem_op; + if (dws->caps & DW_SPI_CAP_EMODE) + dws->mem_ops.supports_op = dw_spi_supports_enh_mem_op; + else + dws->mem_ops.supports_op = dw_spi_supports_mem_op; dws->mem_ops.exec_op = dw_spi_exec_mem_op; if (!dws->max_mem_freq) dws->max_mem_freq = dws->max_freq; diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 16a8c7ab7364..81a433ab759b 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -35,6 +35,7 @@ /* DW SPI controller capabilities */ #define DW_SPI_CAP_CS_OVERRIDE BIT(0) #define DW_SPI_CAP_DFS32 BIT(1) +#define DW_SPI_CAP_EMODE BIT(2) /* Register offsets (Generic for both DWC APB SSI and DWC SSI IP-cores) */ #define DW_SPI_CTRLR0 0x00 -- cgit v1.2.3 From 3d7fd27c970e757fadc96be08453e2e29c226051 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 3 Aug 2026 05:40:37 -0700 Subject: spi: dw: adjust size of mem_op In enhanced mode adjust the size of the data that can be sent or received as this will then be used to set the NDF. Signed-off-by: Sudip Mukherjee Co-developed-by: Changhuang Liang Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-5-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index e720d4276de1..f1b7328fed77 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -510,6 +510,16 @@ static int dw_spi_target_abort(struct spi_controller *ctlr) return 0; } +static int dw_spi_adjust_enh_mem_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + if (op->data.dir == SPI_MEM_DATA_IN) + op->data.nbytes = clamp_val(op->data.nbytes, 0, DW_SPI_NDF_MASK + 1); + else + op->data.nbytes = clamp_val(op->data.nbytes, 0, DW_SPI_NDF_MASK); + + return 0; +} + static int dw_spi_adjust_mem_op_size(struct spi_mem *mem, struct spi_mem_op *op) { if (op->data.dir == SPI_MEM_DATA_IN) @@ -829,10 +839,14 @@ static void dw_spi_init_mem_ops(struct dw_spi *dws) if (!dws->mem_ops.exec_op && !(dws->caps & DW_SPI_CAP_CS_OVERRIDE) && !dws->set_cs) { dws->mem_ops.adjust_op_size = dw_spi_adjust_mem_op_size; - if (dws->caps & DW_SPI_CAP_EMODE) + if (dws->caps & DW_SPI_CAP_EMODE) { dws->mem_ops.supports_op = dw_spi_supports_enh_mem_op; - else + dws->mem_ops.adjust_op_size = dw_spi_adjust_enh_mem_op_size; + } else { dws->mem_ops.supports_op = dw_spi_supports_mem_op; + dws->mem_ops.adjust_op_size = dw_spi_adjust_mem_op_size; + } + dws->mem_ops.exec_op = dw_spi_exec_mem_op; if (!dws->max_mem_freq) dws->max_mem_freq = dws->max_freq; -- cgit v1.2.3 From 8678095362ccddf538d33acdd697ce6a904c87e9 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 3 Aug 2026 05:40:38 -0700 Subject: spi: dw: update NDF while using enhanced spi mode If the transfer of Transmit only mode is using enhanced SPI then NDF needs to be updated with the number of data frames. If the Transmit FIFO goes empty in-between, DWC_ssi masks the serial clock and wait for rest of the data until the programmed amount of frames are transferred successfully. In receive mode, the number of data frames received is equal to this register value plus 1. In transmit mode, the number of data frames is equal this register value. Signed-off-by: Sudip Mukherjee Co-developed-by: Changhuang Liang Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-6-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index f1b7328fed77..d654cb748646 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -348,6 +348,9 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, if (cfg->tmode == DW_SPI_CTRLR0_TMOD_EPROMREAD || cfg->tmode == DW_SPI_CTRLR0_TMOD_RO) dw_writel(dws, DW_SPI_CTRLR1, cfg->ndf ? cfg->ndf - 1 : 0); + else if (cfg->tmode == DW_SPI_CTRLR0_TMOD_TO && + dws->caps & DW_SPI_CAP_EMODE) + dw_writel(dws, DW_SPI_CTRLR1, cfg->ndf); /* Note DW APB SSI clock divider doesn't support odd numbers */ clk_div = (DIV_ROUND_UP(dws->max_freq, cfg->freq) + 1) & 0xfffe; -- cgit v1.2.3 From 4cd882e1da799e249300ccaacbd15a3c19c35869 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 3 Aug 2026 05:40:39 -0700 Subject: spi: dw: Introduce enhanced single/dual/quad/octal spi If the spi transfer is using enhanced single/dual/quad/octal spi mode, then we need to update the SPI_CTRLR0 register. The SPI_CTRLR0 register will be updated in dw_spi_update_config() via the values in dw_spi_enh_cfg. Signed-off-by: Sudip Mukherjee Co-developed-by: Changhuang Liang Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-7-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++- drivers/spi/spi-dw.h | 9 +++++ 2 files changed, 95 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index d654cb748646..dbe8779ced86 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -828,6 +828,90 @@ static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) return ret; } +static void dw_spi_init_enh_mem_buf(struct dw_spi *dws, const struct spi_mem_op *op) +{ + dws->n_bytes = 1; + if (op->data.dir == SPI_MEM_DATA_IN) { + dws->rx = op->data.buf.in; + dws->rx_len = op->data.nbytes; + dws->tx = NULL; + dws->tx_len = 0; + } else if (op->data.dir == SPI_MEM_DATA_OUT) { + dws->tx_len = op->data.nbytes; + dws->tx = (void *)op->data.buf.out; + dws->rx = NULL; + dws->rx_len = 0; + } else { + dws->rx = NULL; + dws->rx_len = 0; + dws->tx = NULL; + dws->tx_len = 0; + } +} + +static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct spi_controller *ctlr = mem->spi->controller; + struct dw_spi *dws = spi_controller_get_devdata(ctlr); + struct dw_spi_enh_cfg enh_cfg = {0}; + struct dw_spi_cfg cfg = {0}; + + switch (op->data.buswidth) { + case 0: + case 1: + cfg.spi_frf = DW_SPI_CTRLR0_SPI_FRF_STD_SPI; + break; + case 2: + cfg.spi_frf = DW_SPI_CTRLR0_SPI_FRF_DUAL_SPI; + break; + case 4: + cfg.spi_frf = DW_SPI_CTRLR0_SPI_FRF_QUAD_SPI; + break; + case 8: + cfg.spi_frf = DW_SPI_CTRLR0_SPI_FRF_OCT_SPI; + break; + default: + return -EINVAL; + } + + dw_spi_init_enh_mem_buf(dws, op); + + cfg.dfs = 8; + cfg.freq = clamp(op->max_freq, 0U, dws->max_mem_freq); + cfg.ndf = op->data.nbytes; + if (op->data.dir == SPI_MEM_DATA_IN) + cfg.tmode = DW_SPI_CTRLR0_TMOD_RO; + else + cfg.tmode = DW_SPI_CTRLR0_TMOD_TO; + + if (op->data.buswidth == op->addr.buswidth && + op->data.buswidth == op->cmd.buswidth) + enh_cfg.trans_t = DW_SPI_ENH_CTRLR0_TRANS_TYPE_TT2; + else if (op->data.buswidth == op->addr.buswidth) + enh_cfg.trans_t = DW_SPI_ENH_CTRLR0_TRANS_TYPE_TT1; + else + enh_cfg.trans_t = DW_SPI_ENH_CTRLR0_TRANS_TYPE_TT0; + + enh_cfg.addr_l = op->addr.nbytes << 1; + if (op->cmd.nbytes == 2) + enh_cfg.inst_l = DW_SPI_ENH_CTRLR0_INST_L_INST_L16; + else if (op->cmd.nbytes == 1) + enh_cfg.inst_l = DW_SPI_ENH_CTRLR0_INST_L_INST_L8; + else + enh_cfg.inst_l = DW_SPI_ENH_CTRLR0_INST_L_INST_L0; + + if (op->dummy.buswidth) + enh_cfg.wait_c = op->dummy.nbytes * BITS_PER_BYTE / op->dummy.buswidth; + + dw_spi_enable_chip(dws, 0); + + dw_spi_update_config(dws, mem->spi, &cfg, &enh_cfg); + + dw_spi_enable_chip(dws, 1); + + return 0; +} + /* * Initialize the default memory operations if a glue layer hasn't specified * custom ones. Direct mapping operations will be preserved anyway since DW SPI @@ -843,14 +927,15 @@ static void dw_spi_init_mem_ops(struct dw_spi *dws) !dws->set_cs) { dws->mem_ops.adjust_op_size = dw_spi_adjust_mem_op_size; if (dws->caps & DW_SPI_CAP_EMODE) { + dws->mem_ops.exec_op = dw_spi_exec_enh_mem_op; dws->mem_ops.supports_op = dw_spi_supports_enh_mem_op; dws->mem_ops.adjust_op_size = dw_spi_adjust_enh_mem_op_size; } else { + dws->mem_ops.exec_op = dw_spi_exec_mem_op; dws->mem_ops.supports_op = dw_spi_supports_mem_op; dws->mem_ops.adjust_op_size = dw_spi_adjust_mem_op_size; } - dws->mem_ops.exec_op = dw_spi_exec_mem_op; if (!dws->max_mem_freq) dws->max_mem_freq = dws->max_freq; } diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 81a433ab759b..2dae81c15423 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -102,6 +102,9 @@ #define DW_HSSI_CTRLR0_SPI_FRF_MASK GENMASK(23, 22) #define DW_PSSI_CTRLR0_SPI_FRF_MASK GENMASK(22, 21) #define DW_SPI_CTRLR0_SPI_FRF_STD_SPI 0x0 +#define DW_SPI_CTRLR0_SPI_FRF_DUAL_SPI 0x1 +#define DW_SPI_CTRLR0_SPI_FRF_QUAD_SPI 0x2 +#define DW_SPI_CTRLR0_SPI_FRF_OCT_SPI 0x3 /* Bit fields in CTRLR1 */ #define DW_SPI_NDF_MASK GENMASK(15, 0) @@ -133,7 +136,13 @@ #define DW_SPI_ENH_CTRLR0_CLK_STRETCH_EN BIT(30) #define DW_SPI_ENH_CTRLR0_WAIT_CYCLE_MASK GENMASK(15, 11) #define DW_SPI_ENH_CTRLR0_INST_L_MASK GENMASK(9, 8) +#define DW_SPI_ENH_CTRLR0_INST_L_INST_L0 0x0 +#define DW_SPI_ENH_CTRLR0_INST_L_INST_L8 0x2 +#define DW_SPI_ENH_CTRLR0_INST_L_INST_L16 0x3 #define DW_SPI_ENH_CTRLR0_ADDR_L_MASK GENMASK(5, 2) +#define DW_SPI_ENH_CTRLR0_TRANS_TYPE_TT0 0x0 +#define DW_SPI_ENH_CTRLR0_TRANS_TYPE_TT1 0x1 +#define DW_SPI_ENH_CTRLR0_TRANS_TYPE_TT2 0x2 #define DW_SPI_ENH_CTRLR0_TRANS_TYPE_MASK GENMASK(1, 0) /* Mem/DMA operations helpers */ -- cgit v1.2.3 From 51119176c2524c34b524bb63fbfa46f95775ae51 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 3 Aug 2026 05:40:40 -0700 Subject: spi: dw: send cmd and addr to start the spi transfer In enhanced spi mode, read or write will start by sending the cmd and address (if present). Signed-off-by: Sudip Mukherjee Co-developed-by: Changhuang Liang Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-8-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index dbe8779ced86..3388f62dc695 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -849,6 +849,19 @@ static void dw_spi_init_enh_mem_buf(struct dw_spi *dws, const struct spi_mem_op } } +static void dw_spi_enh_write_cmd_addr(struct dw_spi *dws, const struct spi_mem_op *op) +{ + /* Send cmd as 32 bit value */ + dw_write_io_reg(dws, DW_SPI_DR, op->cmd.opcode); + if (op->addr.nbytes) { + dw_write_io_reg(dws, DW_SPI_DR, lower_32_bits(op->addr.val)); + if (op->addr.nbytes > 4) { + /* address more than 32bit */ + dw_write_io_reg(dws, DW_SPI_DR, upper_32_bits(op->addr.val)); + } + } +} + static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) { struct spi_controller *ctlr = mem->spi->controller; @@ -909,6 +922,8 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op * dw_spi_enable_chip(dws, 1); + dw_spi_enh_write_cmd_addr(dws, op); + return 0; } -- cgit v1.2.3 From e017fae89e6d89f15f99e0df74377187ca1d9dee Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 3 Aug 2026 05:40:41 -0700 Subject: spi: dw: use irq handler for enhanced spi Introduce the interrupt handler for enhanced spi to read or write based on the generated irq. Also, use the xfer_completion from spi_controller to wait for a timeout or completion from irq handler. In enhanced mode we need to calculate RXFTLR based on the length of data we are expecting to receive or the fifo length. Signed-off-by: Sudip Mukherjee Co-developed-by: Changhuang Liang Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-9-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 106 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 104 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index 3388f62dc695..cca8f4ba1004 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -248,6 +248,29 @@ static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws) return IRQ_HANDLED; } +static irqreturn_t dw_spi_enh_handler(struct dw_spi *dws) +{ + u16 irq_status = dw_readl(dws, DW_SPI_ISR); + + if (irq_status & DW_SPI_INT_RXFI) { + dw_reader(dws); + if (dws->rx_len && dws->rx_len <= dw_readl(dws, DW_SPI_RXFTLR)) + dw_writel(dws, DW_SPI_RXFTLR, dws->rx_len - 1); + } + + if (irq_status & DW_SPI_INT_TXEI) + dw_writer(dws); + + if (!dws->tx_len && dws->rx_len) { + dw_spi_mask_intr(dws, DW_SPI_INT_TXEI); + } else if (!dws->rx_len && !dws->tx_len) { + dw_spi_mask_intr(dws, 0xff); + spi_finalize_current_transfer(dws->ctlr); + } + + return IRQ_HANDLED; +} + static irqreturn_t dw_spi_irq(int irq, void *dev_id) { struct spi_controller *ctlr = dev_id; @@ -257,10 +280,17 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id) if (!irq_status) return IRQ_NONE; - if (!ctlr->cur_msg) { + if (!dws->transfer_handler || + (!ctlr->cur_msg && dws->transfer_handler == dw_spi_transfer_handler)) { dw_spi_mask_intr(dws, 0xff); return IRQ_HANDLED; } + if (dws->transfer_handler == dw_spi_enh_handler && + !dws->rx_len && !dws->tx_len) { + dw_spi_mask_intr(dws, 0xff); + spi_finalize_current_transfer(ctlr); + return IRQ_HANDLED; + } return dws->transfer_handler(dws); } @@ -399,6 +429,33 @@ static void dw_spi_irq_setup(struct dw_spi *dws) dw_spi_umask_intr(dws, imask); } +static void dw_spi_enh_irq_setup(struct dw_spi *dws) +{ + u16 level; + u8 imask; + + /* + * Originally Tx and Rx data lengths match. Rx FIFO Threshold level + * will be adjusted at the final stage of the IRQ-based SPI transfer + * execution so not to lose the leftover of the incoming data. + */ + level = min_t(unsigned int, dws->fifo_len / 2, dws->tx_len); + dw_writel(dws, DW_SPI_TXFTLR, level); + + /* + * In enhanced mode if we are reading then tx_len is 0 as we + * have nothing to transmit. Calculate DW_SPI_RXFTLR with + * rx_len. + */ + level = min_t(unsigned int, dws->fifo_len / 2, dws->rx_len); + dw_writel(dws, DW_SPI_RXFTLR, level ? level - 1 : 0); + + dws->transfer_handler = dw_spi_enh_handler; + + imask = DW_SPI_INT_TXEI | DW_SPI_INT_RXFI; + dw_spi_umask_intr(dws, imask); +} + /* * The iterative procedure of the poll-based transfer is simple: write as much * as possible to the Tx FIFO, wait until the pending to receive data is ready @@ -868,6 +925,8 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op * struct dw_spi *dws = spi_controller_get_devdata(ctlr); struct dw_spi_enh_cfg enh_cfg = {0}; struct dw_spi_cfg cfg = {0}; + unsigned long long ms; + int ret; switch (op->data.buswidth) { case 0: @@ -920,11 +979,54 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op * dw_spi_update_config(dws, mem->spi, &cfg, &enh_cfg); + dw_spi_mask_intr(dws, 0xff); + reinit_completion(&ctlr->xfer_completion); dw_spi_enable_chip(dws, 1); dw_spi_enh_write_cmd_addr(dws, op); + dw_spi_set_cs(mem->spi, false); - return 0; + /* + * FIXME: The exact reason for this delay is not fully understood, + * but empirical testing shows it significantly improves the stability + * of read/write operations. Without this delay, occasional transfer + * errors or timeouts may occur under certain conditions. + * Keeping it as a safeguard based on practical validation. + */ + udelay(5); + + dw_spi_enh_irq_setup(dws); + + /* Use timeout calculation from spi_transfer_wait() */ + ms = 8LL * MSEC_PER_SEC * (dws->rx_len ? dws->rx_len : dws->tx_len); + do_div(ms, dws->current_freq); + + /* + * Increase it twice and add 200 ms tolerance, use + * predefined maximum in case of overflow. + */ + ms += ms + 200; + if (ms > UINT_MAX) + ms = UINT_MAX; + + ms = wait_for_completion_timeout(&ctlr->xfer_completion, + msecs_to_jiffies(ms)); + if (ms == 0) { + dw_spi_mask_intr(dws, 0xff); + synchronize_irq(dws->irq); + dws->rx = NULL; + dws->tx = NULL; + dws->rx_len = 0; + dws->tx_len = 0; + dw_spi_stop_mem_op(dws, mem->spi); + return -EIO; + } + + ret = dw_spi_wait_mem_op_done(dws); + + dw_spi_stop_mem_op(dws, mem->spi); + + return ret; } /* -- cgit v1.2.3 From defdd0f3d09a0676bdbff230c6783bf066fbddac Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 3 Aug 2026 05:40:42 -0700 Subject: spi: dw: detect enhanced spi mode All the SSI controllers supporting enhanced spi modes might not support all the three dual or quad or octal modes. Detect the modes that are supported and finally enable the DW_SPI_CAP_EMODE capability which will start using all the enhanced spi functions that has been added. Signed-off-by: Sudip Mukherjee Co-developed-by: Changhuang Liang Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-10-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 75 +++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 72 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index cca8f4ba1004..bfa017df7673 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -1029,6 +1029,12 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op * return ret; } +static bool dw_spi_can_use_mem_ops(struct dw_spi *dws) +{ + return !dws->mem_ops.exec_op && !(dws->caps & DW_SPI_CAP_CS_OVERRIDE) && + !dws->set_cs; +} + /* * Initialize the default memory operations if a glue layer hasn't specified * custom ones. Direct mapping operations will be preserved anyway since DW SPI @@ -1040,8 +1046,7 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op * */ static void dw_spi_init_mem_ops(struct dw_spi *dws) { - if (!dws->mem_ops.exec_op && !(dws->caps & DW_SPI_CAP_CS_OVERRIDE) && - !dws->set_cs) { + if (dw_spi_can_use_mem_ops(dws)) { dws->mem_ops.adjust_op_size = dw_spi_adjust_mem_op_size; if (dws->caps & DW_SPI_CAP_EMODE) { dws->mem_ops.exec_op = dw_spi_exec_enh_mem_op; @@ -1103,6 +1108,66 @@ static void dw_spi_cleanup(struct spi_device *spi) spi_set_ctldata(spi, NULL); } +static u16 detect_enh_mode(struct dw_spi *dws) +{ + u32 tmp_spi_ctrlr0, tmp_ctrlr0; + u32 tmp_val, frf_shift; + u16 mode = 0; + + if (dw_spi_ver_is_ge(dws, HSSI, 103A)) + frf_shift = __bf_shf(DW_HSSI_CTRLR0_SPI_FRF_MASK); + else if (dw_spi_ver_is_ge(dws, PSSI, 400A)) + frf_shift = __bf_shf(DW_PSSI_CTRLR0_SPI_FRF_MASK); + else + return 0; + + tmp_ctrlr0 = dw_readl(dws, DW_SPI_CTRLR0); + tmp_spi_ctrlr0 = dw_readl(dws, DW_SPI_SPI_CTRLR0); + dw_spi_enable_chip(dws, 0); + + /* test dual mode */ + tmp_val = DW_SPI_CTRLR0_SPI_FRF_DUAL_SPI << frf_shift; + dw_writel(dws, DW_SPI_CTRLR0, tmp_val); + if ((tmp_val & dw_readl(dws, DW_SPI_CTRLR0)) == tmp_val) + mode |= SPI_TX_DUAL | SPI_RX_DUAL; + + /* test quad mode */ + tmp_val = DW_SPI_CTRLR0_SPI_FRF_QUAD_SPI << frf_shift; + dw_writel(dws, DW_SPI_CTRLR0, tmp_val); + if ((tmp_val & dw_readl(dws, DW_SPI_CTRLR0)) == tmp_val) + mode |= SPI_TX_QUAD | SPI_RX_QUAD; + + /* test octal mode */ + tmp_val = DW_SPI_CTRLR0_SPI_FRF_OCT_SPI << frf_shift; + dw_writel(dws, DW_SPI_CTRLR0, tmp_val); + if ((tmp_val & dw_readl(dws, DW_SPI_CTRLR0)) == tmp_val) + mode |= SPI_TX_OCTAL | SPI_RX_OCTAL; + + if (!mode) + goto disable_enh; + + /* test clock stretching */ + dw_writel(dws, DW_SPI_SPI_CTRLR0, DW_SPI_ENH_CTRLR0_CLK_STRETCH_EN); + if ((DW_SPI_ENH_CTRLR0_CLK_STRETCH_EN & dw_readl(dws, DW_SPI_SPI_CTRLR0)) != + DW_SPI_ENH_CTRLR0_CLK_STRETCH_EN) { + /* + * If clock stretching is not enabled then do not use + * enhanced mode. + */ + mode = 0; + goto disable_enh; + } + + dws->caps |= DW_SPI_CAP_EMODE; + +disable_enh: + dw_writel(dws, DW_SPI_CTRLR0, tmp_ctrlr0); + dw_writel(dws, DW_SPI_SPI_CTRLR0, tmp_spi_ctrlr0); + dw_spi_enable_chip(dws, 1); + + return mode; +} + /* Restart the controller, disable all interrupts, clean rx fifo */ static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws) { @@ -1182,6 +1247,11 @@ static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws) dws->caps |= DW_SPI_CAP_DFS32; } + dws->ctlr->mode_bits |= SPI_CPOL | SPI_CPHA; + + if (!spi_controller_is_target(dws->ctlr) && dw_spi_can_use_mem_ops(dws)) + dws->ctlr->mode_bits |= detect_enh_mode(dws); + /* enable HW fixup for explicit CS deselect for Amazon's alpine chip */ if (dws->caps & DW_SPI_CAP_CS_OVERRIDE) dw_writel(dws, DW_SPI_CS_OVERRIDE, 0xF); @@ -1226,7 +1296,6 @@ int dw_spi_add_controller(struct device *dev, struct dw_spi *dws) dw_spi_init_mem_ops(dws); - ctlr->mode_bits = SPI_CPOL | SPI_CPHA; if (dws->caps & DW_SPI_CAP_DFS32) ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); else -- cgit v1.2.3 From 8edce30fc953f5ea06493435a2c26f4709d76e90 Mon Sep 17 00:00:00 2001 From: Changhuang Liang Date: Mon, 3 Aug 2026 05:40:43 -0700 Subject: spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-sfc Add a new compatible string "starfive,jhb100-sfc" for the StarFive JHB100 SPI Flash Controller, it based on the Synopsys DesignWare SSI version 2.00a but with minor modifications. Due to these minor modifications, it only supports access for flash memory and requires a system controller register to configure the address mode filter for SPI NOR flash devices. The starfive,sfc-filter-syscon property is required to provide a phandle to the system controller that manages switching between 3-byte and 4-byte addressing modes, essential for supporting SPI NOR flash devices with different address width requirements. Signed-off-by: Changhuang Liang Acked-by: Conor Dooley Link: https://patch.msgid.link/20260803124044.156998-11-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/snps,dw-apb-ssi.yaml | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 95a5bd894e93..883711ccb386 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -33,6 +33,17 @@ allOf: else: properties: amd,pensando-elba-syscon: false + - if: + properties: + compatible: + contains: + const: starfive,jhb100-sfc + then: + required: + - starfive,sfc-filter-syscon + else: + properties: + starfive,sfc-filter-syscon: false properties: compatible: @@ -67,6 +78,8 @@ properties: const: amd,pensando-elba-spi - description: Canaan Kendryte K210 SoS SPI Controller const: canaan,k210-spi + - description: StarFive JHB100 SoC SPI Flash Controller + const: starfive,jhb100-sfc - description: Renesas RZ/N1 SPI Controller items: - const: renesas,r9a06g032-spi # RZ/N1D @@ -141,6 +154,15 @@ properties: Block address to control SPI chip-selects. The Elba SoC system controller provides an interface to override the native DWC SSI CS control. + starfive,sfc-filter-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Phandle to the system controller register that controls the SPI NOR flash + address mode filter. This system controller interface provides additional + configuration to switch between 3-byte and 4-byte addressing modes, which + is required when accessing SPI NOR flash devices with different address + width requirements. + patternProperties: "@[0-9a-f]$": type: object -- cgit v1.2.3 From 012c1b04f528c865a372884d6f6240279b065627 Mon Sep 17 00:00:00 2001 From: Changhuang Liang Date: Mon, 3 Aug 2026 05:40:44 -0700 Subject: spi: dw: Add support for StarFive JHB100 SoC SFC Add support for the StarFive JHB100 SoC SPI Flash Controller (SFC), which is based on the Synopsys DesignWare SSI version 2.00a but with some customizations. The JHB100 SFC controller has the following special features: 1. Separate registers for instruction and address (DW_SPI_JHB100_INST and DW_SPI_JHB100_ADDR) instead of using the common data register. 2. A filter interrupt mask register (DW_SPI_JHB100_FILTER_IMR), which is default masked to disable filter interrupts as they are not used. 3. Requires a system controller phandle "starfive,sfc-filter-syscon" to configure 3-byte/4-byte address mode switching per chip select. 4. Different Set CS and Enable Controller Timing. A new quirk flag DW_SPI_QUIRK_JHB100 is introduced to handle these differences in the enhanced SPI memory operation path. The controller uses the HSSI initialization path (DW_HSSI_ID) and shares the same interrupt masking logic. Limit the JHB100 SFC address to 3-byte or 4-byte length. Additionally, the platform_suspend() and platform_resume() callbacks are introduced to handle platform-private suspend/resume procedures. Signed-off-by: Changhuang Liang Link: https://patch.msgid.link/20260803124044.156998-12-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown --- drivers/spi/spi-dw-core.c | 48 +++++++++++++++++++++++-------- drivers/spi/spi-dw-mmio.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/spi/spi-dw.h | 18 ++++++++++++ 3 files changed, 127 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index bfa017df7673..dfce2fa20adf 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -591,6 +591,8 @@ static int dw_spi_adjust_mem_op_size(struct spi_mem *mem, struct spi_mem_op *op) static bool dw_spi_supports_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) { + struct dw_spi *dws = spi_controller_get_devdata(mem->spi->controller); + if (op->addr.nbytes != 0 && op->addr.buswidth != 1 && op->addr.buswidth != op->data.buswidth) return false; @@ -614,6 +616,10 @@ static bool dw_spi_supports_enh_mem_op(struct spi_mem *mem, FIELD_MAX(DW_SPI_ENH_CTRLR0_WAIT_CYCLE_MASK)) return false; + if ((dws->quirk_flags & DW_SPI_QUIRK_JHB100) && op->addr.nbytes && + op->addr.nbytes != 3 && op->addr.nbytes != 4) + return false; + return spi_mem_default_supports_op(mem, op); } @@ -906,16 +912,30 @@ static void dw_spi_init_enh_mem_buf(struct dw_spi *dws, const struct spi_mem_op } } -static void dw_spi_enh_write_cmd_addr(struct dw_spi *dws, const struct spi_mem_op *op) +static void dw_spi_enh_write_cmd_addr(struct dw_spi *dws, const struct spi_mem_op *op, + struct spi_mem *mem) { - /* Send cmd as 32 bit value */ - dw_write_io_reg(dws, DW_SPI_DR, op->cmd.opcode); - if (op->addr.nbytes) { - dw_write_io_reg(dws, DW_SPI_DR, lower_32_bits(op->addr.val)); - if (op->addr.nbytes > 4) { - /* address more than 32bit */ - dw_write_io_reg(dws, DW_SPI_DR, upper_32_bits(op->addr.val)); + if (dws->quirk_flags & DW_SPI_QUIRK_JHB100) { + dw_write_io_reg(dws, DW_SPI_JHB100_INST, op->cmd.opcode); + if (op->addr.nbytes) + dw_write_io_reg(dws, DW_SPI_JHB100_ADDR, op->addr.val); + + dw_spi_set_cs(mem->spi, false); + dw_spi_enable_chip(dws, 1); + } else { + dw_spi_enable_chip(dws, 1); + + /* Send cmd as 32 bit value */ + dw_write_io_reg(dws, DW_SPI_DR, op->cmd.opcode); + if (op->addr.nbytes) { + dw_write_io_reg(dws, DW_SPI_DR, lower_32_bits(op->addr.val)); + if (op->addr.nbytes > 4) { + /* address more than 32bit */ + dw_write_io_reg(dws, DW_SPI_DR, upper_32_bits(op->addr.val)); + } } + + dw_spi_set_cs(mem->spi, false); } } @@ -981,10 +1001,16 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op * dw_spi_mask_intr(dws, 0xff); reinit_completion(&ctlr->xfer_completion); - dw_spi_enable_chip(dws, 1); - dw_spi_enh_write_cmd_addr(dws, op); - dw_spi_set_cs(mem->spi, false); + if (op->addr.nbytes && dws->set_addr_nbyte) { + ret = dws->set_addr_nbyte(mem->spi, op->addr.nbytes); + if (ret) { + dw_spi_enable_chip(dws, 1); + return ret; + } + } + + dw_spi_enh_write_cmd_addr(dws, op, mem); /* * FIXME: The exact reason for this delay is not fully understood, diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c index 603e81a92c57..8cdb0351605b 100644 --- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -31,6 +31,8 @@ struct dw_spi_mmio { struct clk *pclk; void *priv; struct reset_control *rstc; + void (*platform_suspend)(struct dw_spi_mmio *dwsmmio); + int (*platform_resume)(struct dw_spi_mmio *dwsmmio); }; #define MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL 0x24 @@ -48,6 +50,8 @@ struct dw_spi_mmio { #define SPARX5_FORCE_ENA 0xa4 #define SPARX5_FORCE_VAL 0xa8 +#define JHB100_ADDRMODE_CS 0x00 + struct dw_spi_mscc { struct regmap *syscon; void __iomem *spi_mst; /* Not sparx5 */ @@ -310,6 +314,58 @@ static int dw_spi_elba_init(struct platform_device *pdev, return 0; } +static int dw_spi_jhb100_set_addr_nbyte(struct spi_device *spi, u8 nbyte) +{ + struct dw_spi *dws = spi_controller_get_devdata(spi->controller); + struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws); + struct regmap *syscon = dwsmmio->priv; + + if (nbyte == 3) { + regmap_update_bits(syscon, JHB100_ADDRMODE_CS, + BIT(spi_get_chipselect(spi, 0)), + 0); + } else if (nbyte == 4) { + regmap_update_bits(syscon, JHB100_ADDRMODE_CS, + BIT(spi_get_chipselect(spi, 0)), + BIT(spi_get_chipselect(spi, 0))); + } else { + dev_err(&spi->dev, "Unsupported address nbyte %d\n", nbyte); + return -EINVAL; + } + + return 0; +} + +static int dw_spi_jhb100_resume(struct dw_spi_mmio *dwsmmio) +{ + dw_spi_jhb100_mask_intr(&dwsmmio->dws, 0xff); + + return 0; +} + +static int dw_spi_jhb100_init(struct platform_device *pdev, + struct dw_spi_mmio *dwsmmio) +{ + struct regmap *syscon; + + syscon = syscon_regmap_lookup_by_phandle(dev_of_node(&pdev->dev), + "starfive,sfc-filter-syscon"); + if (IS_ERR(syscon)) + return dev_err_probe(&pdev->dev, PTR_ERR(syscon), + "syscon regmap lookup failed\n"); + + dwsmmio->priv = syscon; + dwsmmio->platform_resume = dw_spi_jhb100_resume; + + dwsmmio->dws.set_addr_nbyte = dw_spi_jhb100_set_addr_nbyte; + dwsmmio->dws.ip = DW_HSSI_ID; + dwsmmio->dws.quirk_flags = DW_SPI_QUIRK_JHB100; + + dw_spi_jhb100_mask_intr(&dwsmmio->dws, 0xff); + + return 0; +} + static int dw_spi_mmio_probe(struct platform_device *pdev) { int (*init_func)(struct platform_device *pdev, @@ -399,6 +455,9 @@ static int dw_spi_mmio_suspend(struct device *dev) if (ret) return ret; + if (dwsmmio->platform_suspend) + dwsmmio->platform_suspend(dwsmmio); + reset_control_assert(dwsmmio->rstc); clk_disable_unprepare(dwsmmio->pclk); @@ -410,12 +469,24 @@ static int dw_spi_mmio_suspend(struct device *dev) static int dw_spi_mmio_resume(struct device *dev) { struct dw_spi_mmio *dwsmmio = dev_get_drvdata(dev); + int ret; clk_prepare_enable(dwsmmio->clk); clk_prepare_enable(dwsmmio->pclk); reset_control_deassert(dwsmmio->rstc); + if (dwsmmio->platform_resume) { + ret = dwsmmio->platform_resume(dwsmmio); + if (ret) { + reset_control_assert(dwsmmio->rstc); + + clk_disable_unprepare(dwsmmio->pclk); + clk_disable_unprepare(dwsmmio->clk); + return ret; + } + } + return dw_spi_resume_controller(&dwsmmio->dws); } @@ -447,6 +518,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = { { .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init}, { .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init}, { .compatible = "amd,pensando-elba-spi", .data = dw_spi_elba_init}, + { .compatible = "starfive,jhb100-sfc", .data = dw_spi_jhb100_init}, { /* end of table */} }; MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match); diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 2dae81c15423..2fce5bde75f0 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -67,6 +67,11 @@ #define DW_SPI_SPI_CTRLR0 0xf4 #define DW_SPI_CS_OVERRIDE 0xf4 +/* Register offsets (StarFive JHB100 DWC SSI IP-cores) */ +#define DW_SPI_JHB100_INST 0x1000 +#define DW_SPI_JHB100_ADDR 0x1004 +#define DW_SPI_JHB100_FILTER_IMR 0x1008 + /* Bit fields in CTRLR0 (DWC APB SSI) */ #define DW_PSSI_CTRLR0_DFS_MASK GENMASK(3, 0) #define DW_PSSI_CTRLR0_DFS32_MASK GENMASK(20, 16) @@ -199,6 +204,7 @@ struct dw_spi { u32 num_cs; /* chip select lines */ u16 bus_num; void (*set_cs)(struct spi_device *spi, bool enable); + int (*set_addr_nbyte)(struct spi_device *spi, u8 nbyte); /* Current message transfer state info */ void *tx; @@ -228,6 +234,9 @@ struct dw_spi { const struct dw_spi_dma_ops *dma_ops; struct completion dma_completion; +#define DW_SPI_QUIRK_JHB100 BIT(0) + u32 quirk_flags; + #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; struct debugfs_regset32 regset; @@ -296,6 +305,15 @@ static inline void dw_spi_umask_intr(struct dw_spi *dws, u32 mask) dw_writel(dws, DW_SPI_IMR, new_mask); } +/* Disable JHB100 SPI filter IRQ bits */ +static inline void dw_spi_jhb100_mask_intr(struct dw_spi *dws, u32 mask) +{ + u32 new_mask; + + new_mask = dw_readl(dws, DW_SPI_JHB100_FILTER_IMR) & ~mask; + dw_writel(dws, DW_SPI_JHB100_FILTER_IMR, new_mask); +} + /* * This disables the SPI controller, interrupts, clears the interrupts status * and CS, then re-enables the controller back. Transmit and receive FIFO -- cgit v1.2.3