| Age | Commit message (Collapse) | Author |
|---|
|
After using numa_set_mempolicy_home_node() the test fails to compile on
systems with libnuma library versioned lower than 2.0.16.
In order to allow lower library version add a pkg-config related check
and exclude that part of the code. Without the proper MPOL setup it
can't be tested.
Make a total number of tests two. The first one is the first batch and
the second is the MPOL related one. The goal is to let the user know if
it has been skipped due to library limitation.
Remove test_futex_mpol(), it was unused and it is now complained by the
compiler if the part is not compiled.
Fixes: 0ecb4232fc65e ("selftests/futex: Set the home_node in futex_numa_mpol")
Closes: https://lore.kernel.org/oe-lkp/202507150858.bedaf012-lkp@intel.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Commit d8e2f919997 ("selftests/futex: Fix some futex_numa_mpol
subtests") removed the "Memory out of range" subtest due to it being
dependent on the memory layout of the test process having an invalid
memory address just after the `*futex_ptr` allocated memory.
Reintroduce this test and make it deterministic, by allocation two
memory pages and marking the second one with PROT_NONE.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
|
|
Instead of just checking if the syscall failed as expected, check as
well if the returned error code matches the expected error code.
[ bigeasy: reword the commmit message ]
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
|
|
Add a cached copy of the hardware port-id list that is available at init
before all @dport objects have been instantiated. Change is in preparation
of delayed dport instantiation.
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
basic-gcs has it's own make rule to handle the special compiler
invocation to build against nolibc. This rule does not respect the
$(CFLAGS) passed by the Makefile from the parent directory.
However these $(CFLAGS) set up the include path to include the UAPI
headers from the current kernel.
Due to this the asm/hwcap.h header is used from the toolchain instead of
the UAPI and the definition of HWCAP_GCS is not found.
Restructure the rule for basic-gcs to respect the $(CFLAGS).
Also drop those options which are already provided by $(CFLAGS).
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/lkml/CA+G9fYv77X+kKz2YT6xw7=9UrrotTbQ6fgNac7oohOg8BgGvtw@mail.gmail.com/
Fixes: a985fe638344 ("kselftest/arm64/gcs: Use nolibc's getauxval()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch adds tests covering the various paddings in ctx structures.
In case of sk_lookup BPF programs, the behavior is a bit different
because accesses to the padding are explicitly allowed. Other cases
result in a clear reject from the verifier.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/3dc5f025e350aeb2bb1c257b87c577518e574aeb.1758094761.git.paul.chaignon@gmail.com
|
|
Move the sizeof_field and offsetofend macros from individual test files
to the common bpf_misc.h to avoid duplication.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/97a3f3788bd3aec309100bc073a5c77130e371fd.1758094761.git.paul.chaignon@gmail.com
|
|
We also need coverage for when the malicious user is not using the
proper ioctls definitions and tries to work around the driver.
Most of the scaffholding has been generated by claude-4-sonnet and then
carefully reviewed.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Try to ensure all ioctls are having at least one test.
Most of the scaffholding has been generated by claude-4-sonnet and then
carefully reviewed.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit is a rewrite almost from scratch of vmtest.sh.
By relying on virtme-ng, we get rid of boot2container, reducing the
total bootup time (and network requirements). That means that we are
relying on the programs being installed on the host, but that shouldn't
be an issue. The generation of the kconfig is also now handled by
virtme-ng, so that's one less thing to worry.
I used tools/testing/selftests/vsock/vmtest.sh as a base and modified it
to look mostly like my previous script:
- removed the custom ssh handling
- make use of vng for compiling, which allows to bring remote
compilation (and potentially remote compilation on a remote container)
- change the verbosity logic by having 2 levels:
- first one shows the tests outputs
- second level also shows the VM logs
- instead of only running the compiled kernel when it is built, if we
are in the kernel tree, use the kernel artifacts there (and complain
if they are not built)
- adapted the tests list to match the HID subsystem tests
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The harness-selftest.expected is not installed in INSTALL_PATH.
Attempting to execute harness-selftest.sh shows warning:
diff: ./kselftest_harness/harness-selftest.expected: No such file or
directory
Add harness-selftest.expected to TEST_FILES.
Link: https://lore.kernel.org/r/20250909082619.584470-1-yi1.lai@intel.com
Fixes: df82ffc5a3c1 ("selftests: harness: Add kselftest harness selftest")
Signed-off-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
net/lib dependency
The selftests 'make clean' does not clean the net/lib because it only
processes $(TARGETS) and ignores $(INSTALL_DEP_TARGETS). This leaves
compiled objects in net/lib after cleaning, requiring manual cleanup.
Include $(INSTALL_DEP_TARGETS) in clean target to ensure net/lib
dependency is properly cleaned.
Signed-off-by: Nai-Chen Cheng <bleach1827@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20250910-selftests-makefile-clean-v1-1-29e7f496cd87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check if watchdog device supports WDIOF_KEEPALIVEPING option before
entering keep_alive() ping test loop. Fix watchdog-test silently looping
if ioctl based ping is not supported by the device. Exit from test in
such case instead of getting stuck in loop executing failing keep_alive()
watchdog_info:
identity: m41t93 rtc Watchdog
firmware_version: 0
Support/Status: Set timeout (in seconds)
Support/Status: Watchdog triggers a management or other external alarm not a reboot
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
WDIOC_KEEPALIVE not supported by this device
without this change
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
(Where test stuck here forver silently)
Updated change log at commit time:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250914152840.GA3047348@bhairav-test.ee.iitb.ac.in
Fixes: d89d08ffd2c5 ("selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
KVM RISC-V now supports SBI FWFT, so add it to the get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250823155947.1354229-7-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Some common KVM test cases are supported on riscv now as following:
access_tracking_perf_test
dirty_log_perf_test
memslot_modification_stress_test
memslot_perf_test
mmu_stress_test
rseq_test
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Dong Yang <dayss1224@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/c447f18115b27562cd65863645e41a5ef89bd37b.1756710918.git.dayss1224@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add missing headers to fix the build for new RISC-V KVM selftests.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Dong Yang <dayss1224@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/bfb66541918de68cd89b83bc3430af94bdc75a85.1756710918.git.dayss1224@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
To avoid redefinition issues with RISCV_FENCE, directly reference
the existing macro in `rseq-riscv.h`.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Dong Yang <dayss1224@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/85e5e51757c9289ca463fbc4ba6d22f9c9db791b.1756710918.git.dayss1224@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zfbfmin/Zvfbfmin/Zvfbfwma extensions for Guest/VM
so add them to get-reg-list test.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/40e52ff7053401a2fcb206e75f45ebc8557fc28b.1754646071.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zicbop extension for Guest/VM
so add them to get-reg-list test.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://lore.kernel.org/r/076908690c15070f907f43d2ff81ba7e95582ec7.1754646071.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
RX devmem sometimes fails on NIPA:
https://netdev-3.bots.linux.dev/vmksft-fbnic-qemu-dbg/results/294402/7-devmem-py/
Both RSS and flow steering are properly installed, but the wait_port_listen
fails. Try to remove sleep(1) to see if the cause of the failure is
spending too much time during RX setup. I don't see a good reason to
have sleep in the first place. If there needs to be a delay between
installing the rules and receiving the traffic, let's add it to the
callers (devmem.py) instead.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250912170611.676110-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The client-side function connect_one_server() properly closes its IPC
descriptor after use, but the server-side code in both mptcp_sockopt.c
and mptcp_inq.c was missing corresponding close() calls for their IPC
descriptors, leaving file descriptors open unnecessarily.
This change ensures proper cleanup by:
1. Adding missing close(pipefds[0]/unixfds[0]) in server processes
2. Adding close(pipefds[1]/unixfds[1]) after server() function calls
This ensures both ends of the IPC pipe are properly closed in their
respective processes, preventing file descriptor leaks.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-next-mptcp-minor-fixes-6-18-v1-2-99d179b483ad@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The server file descriptor ('fd') is opened in server() but never closed.
While accepted connections are properly closed in process_one_client(),
the main listening socket remains open, causing a resource leak.
This patch ensures the server fd is properly closed after processing
clients, bringing the sockopt and inq test cases in line with proper
resource cleanup practices.
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-next-mptcp-minor-fixes-6-18-v1-1-99d179b483ad@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes several issues in the error reporting of the MPTCP sockopt
selftest:
1. Fix diff not printed: The error messages for counter mismatches had
the actual difference ('diff') as argument, but it was missing in the
format string. Displaying it makes the debugging easier.
2. Fix variable usage: The error check for 'mptcpi_bytes_acked' incorrectly
used 'ret2' (sent bytes) for both the expected value and the difference
calculation. It now correctly uses 'ret' (received bytes), which is the
expected value for bytes_acked.
3. Fix off-by-one in diff: The calculation for the 'mptcpi_rcv_delta' diff
was 's.mptcpi_rcv_delta - ret', which is off-by-one. It has been
corrected to 's.mptcpi_rcv_delta - (ret + 1)' to match the expected
value in the condition above it.
Fixes: 5dcff89e1455 ("selftests: mptcp: explicitly tests aggregate counters")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-5-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous commit adds the MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 flag. Make
sure it is correctly announced by the other peer when it has been
received.
pm_nl_ctl will now display 'deny_join_id0:1' when monitoring the events,
and when this flag was set by the other peer.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-3-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To be able to find which capture files have been produced after several
runs.
This prefix was not printed anywhere before.
While at it, always use the same prefix by taking info from ns1, instead
of "$connector_ns", which is sometimes ns1, sometimes ns2 in the
subtests.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-5-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is better than printing random bytes in the terminal.
Note that Jakub suggested 'hexdump', but Mat found out this tool is not
often installed by default. 'od' can do a similar job, and it is in the
POSIX specs and available in coreutils, so it should be on more systems.
While at it, display a few more bytes, just to fill in the two lines.
And no need to display the 3rd only line showing the next number of
bytes: 0000040.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-4-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The disconnect test-case, with 'plain' TCP sockets generates spurious
errors, e.g.
07 ns1 TCP -> ns1 (dead:beef:1::1:10006) MPTCP
read: Connection reset by peer
read: Connection reset by peer
(duration 155ms) [FAIL] client exit code 3, server 3
netns ns1-FloSdv (listener) socket stat for 10006:
TcpActiveOpens 2 0.0
TcpPassiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 274 0.0
TcpOutSegs 276 0.0
TcpOutRsts 3 0.0
TcpExtPruneCalled 2 0.0
TcpExtRcvPruned 1 0.0
TcpExtTCPPureAcks 104 0.0
TcpExtTCPRcvCollapsed 2 0.0
TcpExtTCPBacklogCoalesce 42 0.0
TcpExtTCPRcvCoalesce 43 0.0
TcpExtTCPChallengeACK 1 0.0
TcpExtTCPFromZeroWindowAdv 42 0.0
TcpExtTCPToZeroWindowAdv 41 0.0
TcpExtTCPWantZeroWindowAdv 13 0.0
TcpExtTCPOrigDataSent 164 0.0
TcpExtTCPDelivered 165 0.0
TcpExtTCPRcvQDrop 1 0.0
In the failing scenarios (TCP -> MPTCP), the involved sockets are
actually plain TCP ones, as fallbacks for passive sockets at 2WHS time
cause the MPTCP listeners to actually create 'plain' TCP sockets.
Similar to commit 218cc166321f ("selftests: mptcp: avoid spurious errors
on disconnect"), the root cause is in the user-space bits: the test
program tries to disconnect as soon as all the pending data has been
spooled, generating an RST. If such option reaches the peer before the
connection has reached the closed status, the TCP socket will report an
error to the user-space, as per protocol specification, causing the
above failure. Note that it looks like this issue got more visible since
the "tcp: receiver changes" series from commit 06baf9bfa6ca ("Merge
branch 'tcp-receiver-changes'").
Address the issue by explicitly waiting for the TCP sockets (-t) to
reach a closed status before performing the disconnect. More precisely,
the test program now waits for plain TCP sockets or TCP subflows in
addition to the MPTCP sockets that were already monitored.
While at it, use 'ss' with '-n' to avoid resolving service names, which
is not needed here.
Fixes: 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-3-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IO errors were correctly printed to stderr, and propagated up to the
main loop for the server side, but the returned value was ignored. As a
consequence, the program for the listener side was no longer exiting
with an error code in case of IO issues.
Because of that, some issues might not have been seen. But very likely,
most issues either had an effect on the client side, or the file
transfer was not the expected one, e.g. the connection got reset before
the end. Still, it is better to fix this.
The main consequence of this issue is the error that was reported by the
selftests: the received and sent files were different, and the MIB
counters were not printed. Also, when such errors happened during the
'disconnect' tests, the program tried to continue until the timeout.
Now when an IO error is detected, the program exits directly with an
error.
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-2-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test to check each value of bond fail_over_mac option.
Also fix a minor garp_test print issue.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250910024336.400253-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the tc police action, iproute2 rounds up mtu and burst sizes to a
higher order representation. For example, if the user specifies the default
mtu for a police action instance (4294967295 bytes), iproute2 will output
it as 4096Mb when this action instance is dumped. After Jay's changes [1],
iproute2 will round up to Gb, so 4096Mb becomes 4Gb. With that in mind,
fix police's tc test output so that it works both with the current
iproute2 version and Jay's.
[1] https://lore.kernel.org/netdev/20250907014216.2691844-1-jay.vosburgh@canonical.com/
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Cong Wang <cwang@multikernel.io>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://patch.msgid.link/20250912154616.67489-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 0e2fb011a0ba ("selftests/bpf: Clean up open-coded gettid syscall
invocations") addressed the issue that older libc may not have a gettid()
function call wrapper for the associated syscall.
A few more instances have crept into tests, use sys_gettid() instead, and
poison raw gettid() usage to avoid future issues.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250911163056.543071-1-alan.maguire@oracle.com
|
|
Make sure that we only switch the cgroup namespace and enter a new
cgroup in a child process separate from test_progs, to not mess up the
environment for subsequent tests.
To remove this cgroup, we need to wait for the child to exit, and then
rmdir its cgroup. If the read call fails, or waitpid succeeds, we know
the child exited (read call would fail when the last pipe end is closed,
otherwise waitpid waits until exit(2) is called). We then invoke a newly
introduced remove_cgroup_pid() helper, that identifies cgroup path using
the passed in pid of the now dead child, instead of using the current
process pid (getpid()).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250915032618.1551762-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For systems having CONFIG_NR_CPUS set to > 1024 in kernel config
the selftest fails as arena_spin_lock_irqsave() returns EOPNOTSUPP.
(eg - incase of powerpc default value for CONFIG_NR_CPUS is 8192)
The selftest is skipped incase bpf program returns EOPNOTSUPP,
with a descriptive message logged.
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Link: https://lore.kernel.org/r/20250913091337.1841916-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Like commit fbdd61c94bcb ("selftests/bpf: Skip timer cases when bpf_timer is not supported"),
'timer_interrupt' test case should be skipped if verifier rejects
bpf_timer with returning -EOPNOTSUPP.
cd tools/testing/selftests/bpf
./test_progs -t timer
461 timer_interrupt:SKIP
Summary: 6/0 PASSED, 7 SKIPPED, 0 FAILED
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250915121657.28084-1-leon.hwang@linux.dev
|
|
Add basic support to run various MIPS variants via kunit_tool using the
virtualized malta platform.
Link: https://lore.kernel.org/r/20250908-kunit-mips-v5-1-d9f0632d1854@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Various KUnit tests require PCI infrastructure to work. All normal
platforms enable PCI by default, but UML does not. Enabling PCI from
.kunitconfig files is problematic as it would not be portable. So in
commit 6fc3a8636a7b ("kunit: tool: Enable virtio/PCI by default on UML")
PCI was enabled by way of CONFIG_UML_PCI_OVER_VIRTIO=y. However
CONFIG_UML_PCI_OVER_VIRTIO requires additional configuration of
CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID or will otherwise trigger a WARN() in
virtio_pcidev_init(). However there is no one correct value for
UML_PCI_OVER_VIRTIO_DEVICE_ID which could be used by default.
This warning is confusing when debugging test failures.
On the other hand, the functionality of CONFIG_UML_PCI_OVER_VIRTIO is not
used at all, given that it is completely non-functional as indicated by
the WARN() in question. Instead it is only used as a way to enable
CONFIG_UML_PCI which itself is not directly configurable.
Instead of going through CONFIG_UML_PCI_OVER_VIRTIO, introduce a custom
configuration option which enables CONFIG_UML_PCI without triggering
warnings or building dead code.
Link: https://lore.kernel.org/r/20250908-kunit-uml-pci-v2-1-d8eba5f73c9d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The uprobe syscall now returns -ENXIO errno when called outside
kernel trampoline, fixing the current sigill test to reflect that
and renaming it to uprobe_error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Intel int340x thermal driver changes for 6.18:
- Add support for new "power slider" firmware interface to the int340x
thermal driver end enable it for Panther Lake platforms (Srinivas
Pandruvada)
- Remove a redundant ACPI control method evaluation from the int340x
thermal driver (Salah Triki)
and clean it up.
* thermal-intel:
thermal: intel: selftests: workload_hint: Mask unsupported types
thermal: intel: int340x: Add module parameter to change slider offset
thermal: intel: int340x: Add module parameter for balanced Slider
thermal: intel: int340x: Enable power slider interface for Panther Lake
thermal: intel: int340x: Add support for power slider
thermal: intel: int340x: Remove redundant acpi_has_method() call
|
|
This test ensures that upon receiving decapsulated packets from a
tunnel interface in openvswitch, the tunnel metadata fields are
properly populated. This partially covers interoperability of the
kernel tunnel ports and openvswitch tunnels (LWT) and parsing and
formatting of the tunnel metadata fields of the openvswitch netlink
uAPI. Doing so, this test also ensures that fields and flags are
properly extracted during decapsulation by the tunnel core code,
serving as a regression test for the previously fixed issue with the
DF bit not being extracted from the outer IP header.
The ovs-dpctl.py script already supports all that is necessary for
the tunnel ports for this test, so we only need to adjust the
ovs_add_if() function to pass the '-t' port type argument in order
to be able to create tunnel ports in the openvswitch datapath.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20250909165440.229890-3-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The str_vsyscall_* constants in proc-pid-vm.c triggers
-Wunused-const-variable warnings with gcc-13.32 and clang 18.1.
Define and apply __maybe_unused locally to suppress the warnings. No
functional change
Fixes compiler warning:
warning: `str_vsyscall_*' defined but not used[-Wunused-const-variable]
Link: https://lkml.kernel.org/r/20250820175610.83014-1-reddybalavignesh9979@gmail.com
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This line in tools/testing/selftests/proc/read.c was added to catch
oopses, not to verify lseek correctness:
(void)lseek(fd, 0, SEEK_SET);
Oh, well. Prevent more embarassement with simple test.
Link: https://lkml.kernel.org/r/aKTCfMuRXOpjBXxI@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "ida: Remove the ida_simple_xxx() API", v3.
These are the final steps in removing the ida_simple_xxx() API.
This series was last proposed in August 2024. Since then, some users of
the old API have be re-introduced and then removed.
A first time in drivers/misc/rpmb-core.c, added in commit 1e9046e3a154
("rpmb: add Replay Protected Memory Block (RPMB) subsystem") (2024-08-26)
and removed in commit dfc881abca42 ("rpmb: Remove usage of the deprecated
ida_simple_xx() API") (2024-10-13).
A second time in drivers/gpio/gpio-mpsse.c, added in commit c46a74ff05c0
("gpio: add support for FTDI's MPSSE as GPIO") (2024-10-14) and removed in
commit f57c08492866 (gpio: mpsse: Remove usage of the deprecated
ida_simple_xx() API) (2024-11-22).
Since then, I've not spotted any new usage.
So things being stable now, it's time to end this story once and for all.
This patch (of 3):
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range()/ida_alloc_max() is inclusive. But because of the ranges
used for the tests, there is no need to adjust them.
While at it remove some useless {}.
Link: https://lkml.kernel.org/r/cover.1752480043.git.christophe.jaillet@wanadoo.fr
Link: https://lkml.kernel.org/r/2904fa2006e4fe58eea63aef87fa7f832c7804a1.1752480043.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
32 bit nodes have a larger branching factor. This affects the required
value to cause a height change. Update the spanning store height test to
work for both 64 and 32 bit nodes.
Link: https://lkml.kernel.org/r/20250828003023.418966-3-Liam.Howlett@oracle.com
Fixes: f9d3a963fef4 ("maple_tree: use height and depth consistently")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "maple_tree: Fix testing for 32bit compiles".
The maple tree test suite supports 32bit builds which causes 32bit nodes
and index/last values. Some tests have too large values and must be
skipped while others depend on certain actions causing the tree to be
altered in another measurable way (such as the height decreasing or
increasing).
Two tests were added that broke 32bit testing, either by compile warnings
or failures. These fixes restore the tests to a working order.
Building 32bit version can be done on a 32bit platform, or by using a
command like: BUILD=32 make clean maple
This patch (of 2):
Some tests are invalid on 32bit due to the size of the index and last.
Making those tests depend on the correct build flags stops compile
complaints.
Link: https://lkml.kernel.org/r/20250828003023.418966-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20250828003023.418966-2-Liam.Howlett@oracle.com
Fixes: 5d659bbb52a2 ("maple_tree: introduce mas_wr_store_type()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The shared userspace logic used for unit-testing maple tree and VMA code
currently has its own replacements for atomics helpers. This is not
needed as the necessary APIs already have userspace implementations in the
tools tree. Switching over to that allows deleting a bit of code.
Note that the implementation is different; while the version being deleted
here is implemented using liburcu, the existing version in tools uses
either x86 asm or compiler builtins. It's assumed that both are equally
likely to be correct.
The tools tree's version of atomic_t is a struct type while the version
being deleted was just a typedef of an integer. This means it's no longer
valid to call __sync_bool_compare_and_swap() directly on it. One option
would be to just peek into the struct and call it on the field, but it
seems a little cleaner to just use the corresponding atomic.h API whic has
been added recently. Now the fake mapping_map_writable() is copied from
the real one.
Link: https://lkml.kernel.org/r/20250828-b4-vma-no-atomic-h-v2-4-02d146a58ed2@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This allows the user to set cflags when building tests that use this
shared build infrastructure.
For example, it enables building with -Werror so that patch-check scripts
will fail:
make -C tools/testing/vma -j EXTRA_CFLAGS=-Werror
Link: https://lkml.kernel.org/r/20250828-b4-vma-no-atomic-h-v2-3-02d146a58ed2@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is an arch/ tree under tools. This contains some useful stuff, to
make that available, add it to the -I flags. This requires $(SRCARCH),
which is provided by Makefile.arch, so include that..
There still aren't that many headers so also just smush all of them into
SHARED_DEPS instead of starting to do any header dependency hocus pocus.
Link: https://lkml.kernel.org/r/20250828-b4-vma-no-atomic-h-v2-2-02d146a58ed2@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
before the test
The test requires at least 2 * (bytes/page_size) hugetlb memory, since we
require identical number of hugepages for src and dst location. Fix this.
Along with the above, as explained in patch "selftests/mm/uffd-stress:
Make test operate on less hugetlb memory", the racy nature of the test
requires that we have some extra number of hugepages left beyond what is
required. Therefore, stricten this constraint.
Link: https://lkml.kernel.org/r/20250909061531.57272-3-dev.jain@arm.com
Fixes: 5a6aa60d1823 ("selftests/mm: skip uffd hugetlb tests with insufficient hugepages")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: uffd-stress fixes", v2.
This patchset ensures that the number of hugepages is correctly set in the
system so that the uffd-stress test does not fail due to the racy nature
of the test. Patch 1 changes the hugepage constraint in the
run_vmtests.sh script, whereas patch 2 changes the constraint in the test
itself.
This patch (of 2):
We observed uffd-stress selftest failure on arm64 and intermittent
failures on x86 too:
running ./uffd-stress hugetlb-private 128 32
bounces: 17, mode: rnd read, ERROR: UFFDIO_COPY error: -12 (errno=12, @uffd-common.c:617) [FAIL]
not ok 18 uffd-stress hugetlb-private 128 32 # exit=1
For this particular case, the number of free hugepages from run_vmtests.sh
will be 128, and the test will allocate 64 hugepages in the source
location. The stress() function will start spawning threads which will
operate on the destination location, triggering uffd-operations like
UFFDIO_COPY from src to dst, which means that we will require 64 more
hugepages for the dst location.
Let us observe the locking_thread() function. It will lock the mutex kept
at dst, triggering uffd-copy. Suppose that 127 (64 for src and 63 for
dst) hugepages have been reserved. In case of BOUNCE_RANDOM, it may
happen that two threads trying to lock the mutex at dst, try to do so at
the same hugepage number. If one thread succeeds in reserving the last
hugepage, then the other thread may fail in alloc_hugetlb_folio(),
returning -ENOMEM. I can confirm that this is indeed the case by this
hacky patch:
:--- a/mm/hugetlb.c
; +++ b/mm/hugetlb.c
; @@ -6929,6 +6929,11 @@ int hugetlb_mfill_atomic_pte(pte_t *dst_pte,
;
; folio = alloc_hugetlb_folio(dst_vma, dst_addr, false);
; if (IS_ERR(folio)) {
; + pte_t *actual_pte = hugetlb_walk(dst_vma, dst_addr, PMD_SIZE);
; + if (actual_pte) {
; + ret = -EEXIST;
; + goto out;
; + }
; ret = -ENOMEM;
; goto out;
; }
This code path gets triggered indicating that the PMD at which one thread
is trying to map a hugepage, gets filled by a racing thread.
Therefore, instead of using freepgs to compute the amount of memory, use
freepgs - (min(32, nr_cpus) - 1), so that the test still has some extra
hugepages to use. The adjustment is a function of min(32, nr_cpus) - the
value of nr_parallel in the test - because in the worst case, nr_parallel
number of threads will try to map a hugepage on the same PMD, one will win
the allocation race, and the other nr_parallel - 1 threads will fail, so
we need extra nr_parallel - 1 hugepages to satisfy this request. Note
that, in case the adjusted value underflows, there is a check for the
number of free hugepages in the test itself, which will fail:
get_free_hugepages() < bytes / page_size A negative value will be passed
on to bytes which is of type size_t, thus the RHS will become a large
value and the check will fail, so we are safe.
Link: https://lkml.kernel.org/r/20250909061531.57272-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20250909061531.57272-2-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
