| Age | Commit message (Collapse) | Author |
|---|
|
By default test_progs re-prints the aggregated error logs of all failed
tests at the end of the run (when not in verbose mode), starting with
"All error logs:".
With bpf-gcc the current failures and a couple runaway 1M fails cause a
huge print overhead/delay at the end.
Add a subtractive --no-error-summary flag, gated on a new
env.error_summary field which defaults to true, so the default behavior
is unchanged. Passing --no-error-summary suppresses the final
"All error logs:" dump.
Only the human readable output is elided. dump_test_log() also emits the
per-test and per-subtest entries of the --json-summary "results" array,
so it keeps being called (via a new @quiet argument) and the JSON report
is bit for bit what it was before.
Signed-off-by: Vineet Gupta <vineet.gupta@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260807204434.1036279-3-vineet.gupta@linux.dev
|
|
reject_scalar_store_to_kptr stores a scalar constant to a kptr field:
*(volatile u64 *)&v->unref_ptr = 0xBADC0DE;
Compilers generate one of two encodings for that:
1. Materialize the constant into a register and emit BPF_STX:
r1 = 0xbadc0de
*(u64 *)(r0 + 0x8) = r1
2. Or fold it into a single BPF_ST (store immediate):
*(u64 *)(r0 + 0x8) = 0xbadc0de
These go through different rejection paths and output different
messages.
- BPF_STX goes through map_kptr_match_type(), which prints
"invalid kptr access, R...".
- BPF_ST only gets the immediate check printing
"BPF_ST imm must be 0 when storing to kptr"
The test only expects the BPF_STX message, so it fails on a toolchain
that folds the constant - bpf-gcc, and clang -mcpu=v4:
7: (7a) *(u64 *)(r0 +8) = 195936478
BPF_ST imm must be 0 when storing to kptr at off=8
...
EXPECTED SUBSTR: 'invalid kptr access, R'
Pick the expected message with __BPF_FEATURE_ST, which clang and bpf-gcc
both define exactly when BPF_ST codegen is available - cpuv4 for clang,
and by default for bpf-gcc, whose default cpu is v4.
bpf-gcc, before: #229/20 map_kptr/reject_scalar_store_to_kptr:FAIL
bpf-gcc, after : #229/20 map_kptr/reject_scalar_store_to_kptr:OK
Two caveats worth noting:
- On a BPF_ST toolchain the test now only exercises the imm != 0 check
and never reaches map_kptr_match_type(), so the scalar-vs-PTR_TO_BTF_ID
rejection the test is named for is only covered by the non-ST builds.
The imm path itself is already covered compiler-independently by
verifier/map_kptr.c ("map_kptr: BPF_ST imm != 0").
- __BPF_FEATURE_ST says the compiler *can* emit BPF_ST, not that it will.
The encoding also depends on the optimization level: clang -mcpu=v4 -O0
still emits BPF_STX, which would send the #ifdef down the wrong branch
and fail the test. Selftests always build BPF objects at -O2 so this
does not bite today, but it is a latent failure mode if that changes.
Signed-off-by: Vineet Gupta <vineet.gupta@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20260807204434.1036279-2-vineet.gupta@linux.dev
|
|
Mark _##fixture_name##_##test_name##_object __maybe_unused since it may
not ever be read. This pointer is only read in XFAIL_ADD(), which tests
are not required to use.
clang made a change to -Wunused-but-set-variable (split out into its own
subwarning, -Wunused-but-set-global) that causes this warning to be
emitted for various selftests and can be upgraded to an error in
selftest that set -Werror.
VFIO selftests have been broken since commit ff556bd98348 ("vfio:
selftests: Add -Wall and -Werror to the Makefile"), and the net
selftests builds have been noisy due to -Wall.
Fixes: 24cf65a62266 ("selftests/harness: Share _metadata between forked processes")
Reported-by: Kuniyuki Iwashima <kuniyu@google.com>
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20260706183154.2660394-1-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Add stream_arena_xchg_fault and stream_arena_cmpxchg_fault next to the
existing read, write and load-acquire fault tests, covering the two
places a read-modify-write can deposit the old value: src_reg for a
BPF_XCHG and r0 for a BPF_CMPXCHG. Both cover both halves of the JIT
bug that left the fetch destination alone when a RMW on an arena pointer
faulted:
- the fault has to be reported as a WRITE, and at the address held by
the destination register, which __stderr() and test_address() check
- the register receiving the fetched value has to be cleared by the
fault handler, which the programs check by poisoning it before the
atomic and returning it, so __retval(0) fails if it is left untouched
The __stderr() annotation can only wildcard the faulting address since
the arena base is not known until runtime, hence the two test_address()
subtests on top, which pin it to the address held by dst_reg rather than
src_reg.
Note, the atomics are open coded since linux/filter.h cannot be included
alongside vmlinux.h.
# LDLIBS=-static PKG_CONFIG='pkg-config --static' ./vmtest.sh -- ./test_progs -t stream
[...]
#464/1 stream_arena_fault_address/read_fault:OK
#464/2 stream_arena_fault_address/write_fault:OK
#464/3 stream_arena_fault_address/load_acquire_fault:OK
#464/4 stream_arena_fault_address/xchg_fault:OK
#464/5 stream_arena_fault_address/cmpxchg_fault:OK
#464 stream_arena_fault_address:OK
[...]
#466/5 stream_success/stream_arena_write_fault:OK
#466/6 stream_success/stream_arena_read_fault:OK
#466/7 stream_success/stream_arena_load_acquire_fault:OK
#466/8 stream_success/stream_arena_xchg_fault:OK
#466/9 stream_success/stream_arena_cmpxchg_fault:OK
[...]
Summary: 4/22 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://patch.msgid.link/20260811131600.506721-6-daniel@iogearbox.net
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Pull to receive:
c10b216a072f ("sched/core: Handle pick_task() releasing the rq lock")
f3629c63a4af ("sched/core: Make core-sched flips wait for in-flight selections")
ffaab58d2175 ("sched_ext: Replace SCX_RQ_BAL_KEEP with a dispatch verdict return")
3dd52416e44a ("sched_ext: Fix this_rq() assumptions in dispatch kfuncs")
f2da9587118d ("sched_ext: Count rq lock releases in rq->scx.lock_drop_seq")
d954004205c1 ("sched_ext: Fix rq->core_pick corruption under core scheduling")
for the pending core scheduling follow-ups and to resolve the conflicts
with the code reorganization and cap gate work on for-7.3.
ffaab58d2175 converts scx_dispatch_sched() to a dispatch verdict return
which for-7.3 moved from ext.c into inlines.h. Resolved by applying the
conversion to the relocated copy and combining balance_one()'s verdict
returns with the scx_task_can_stay_on_cpu() gate from the cap work.
ffaab58d2175 and 3dd52416e44a update scx_bpf_sub_dispatch() which
for-7.3 moved into sub.c. Resolved by applying the scx_locked_rq()
switch and the verdict test to the sub.c copy.
f2da9587118d instruments the open-coded lock releases in
consume_remote_task() which for-7.3 folded into switch_rq_lock().
Resolved by keeping the accounting in switch_rq_lock() which covers all
its callers.
d954004205c1 widens the put_prev_task_scx() WARN suppression to all
core-sched rqs on the same condition that for-7.3 gated with
scx_task_can_stay_on_cpu(). Resolved by combining both.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
`_list_tests()` runs the kernel to list tests, strips printk timestamp
lines via `extract_tap_lines()`, then drops the dummy TAP header from
the cleaned `lines`. However the subsequent regex filter mistakenly
operates on the original `output` instead of the cleaned `lines`. When
the kernel output includes timestamp prefixes (common with UML or slower
setups), e.g.:
[ 0.100000] suite.test1
[ 0.100000] suite.test2
the anchored regex `^[^\s.]+\.[^\s.]+$` rejects them and `--list_tests`
returns an empty list.
Filter `lines` instead of `output`, matching the behavior of the
adjacent `_list_tests_attr()` which already returns the cleaned list.
Add a regression test with timestamp-prefixed input to verify the fix.
Link: https://lore.kernel.org/r/20260803190059.36491-1-mohammad.abukhader@hotmail.com
Fixes: 723c8258c8fe ("kunit: tool: Add command line interface to filter and report attributes")
Signed-off-by: Mohammad Abu-Khader <mohammad.abukhader@hotmail.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a test case to REMOTE_TEST_MATRIX covering the bug fixed by
commit 345f40166694 ("cgroup/cpuset: Return only actually allocated
CPUs during partition invalidation"). The test verifies that when a
sibling partition root changes its cpuset.cpus to overlap with another
partition root, only actually allocated CPUs (effective_xcpus) are
returned to the parent, not all CPUs in cpus_allowed.
Signed-off-by: Shaojie Sun <sunshaojie@kylinos.cn>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The devlink port_split test has limited applicability.
NICs (as opposed to switches) require at least a re-probe
to apply the split configuration.
On top of that the test is not compatible with our driver env,
it just splits all ports on the system, not only what NETIF
points at.
Long term we may want to add some indication in devlink whether
the port splitting is runtime (cmode of sorts), and fix the
test to follow driver env. But since no (known) NIC driver can
support runtime anyway let's just hide the test from the selftest
framework by moving it to extra files.
Having this test randomly break unrelated NICs within the DUT
makes people implement allow-lists for ksft, which then means
their setups don't run new tests. It's very useful during test
review to see whether the test works across all the runners.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260811004645.1072124-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kselftest_harness.h file contains modern helpers to build tests
for kselftest. Dropping the custom test helpers in ipv6_flowlabel_mgr
in favor of the harness makes tests more legible and conforms to the
structure of the latest selftests. It also enforces the TAP standard.
Another change made to the structure of the ipv6_flowlabel_mgr test
file was the removal of parse_opts. The supported opts were already
unused: the binary is listed in TEST_GEN_FILES, and is driven solely
by ipv6_flowlabel.sh via "./ipv6_flowlabel_mgr", which never passed -l
or -v. Dropping the -l gate means the two checks it previously guarded
(each with a 13-second sleep, ~26 seconds total) are now
unconditionally enabled on every run instead of never running at all.
The TH_LOG calls and code comments now cover the information that the
removed, custom -v flag used to print.
Finally, FIXTURE_SETUP(flowlabel) ensures each test gets its own
isolated network namespace. The previously added setup() helper was
dropped to conform to the netns setup pattern used in icmp_rfc4884.c.
disable_flowlabel_consistency() was moved next to reflect_flag, the
only test that calls it, and now uses SKIP() instead of an ad hoc
[INFO] message when the sysctl cannot be disabled.
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-6-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the source code, flowlabel_consistency must be
deactivated for the IPV6_FL_F_REFLECT flag to work. Since
ipv6_flowlabel_mgr now runs in its own network namespace, do this
directly from the test binary. Attempt to disable
net.ipv6.flowlabel_consistency and skip the reflect test if that
fails. A disabled flowlabel_consistency does not affect the remaining
features being tested on the file, and failing to disable is not fatal
and skips the reflect test only.
The previously defined tcp_listen and tcp_connect helpers were reused,
since the connection flow required for REFLECT validation is very
similar to REMOTE.
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-5-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Have ipv6_flowlabel_mgr create and configure its own network
namespace (unshare(CLONE_NEWNET) + bring up lo), the same way
ipv6_fragmentation.c and icmp_rfc4884.c already do, instead of
relying on the in_netns.sh wrapper script.
The setup can then be reused across tests through fixtures and
provide isolated network environments for each test in the case
of a future adoption of kselftest_harness.
It also avoids the leak of modifications to the netns in case the
user runs the test file directly, outside the wrapper and without
the in_netns.sh file.
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-4-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This flag retrieves the flow label seen by the socket at connection
setup via a getsockopt query. Therefore, the validation of this flag
requires a brief connection setup (source code for flow label shows
it must be TCP).
The simple TCP connection logic was wrapped inside two simple helpers,
because there are other uncovered features of flow label mgr that
could benefit from it (such as IPV6_FL_F_REFLECT).
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-3-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RENEW was the only flow label action without selftests coverage.
Assert renew returns no error on correct usage and fails for labels
that do not exist.
This test is based on the previously implemented EXCL share test,
which demonstrates that a new flow label with the same value can be
created after the linger period. Renew is used here to show that a
flow label can last longer and block a new flow label creation after
the previous linger time. This test, however, demands sleep during
execution, and should be placed as a conditional test under the -l
option.
The addition of the expect_fail_errno helper is necessary to assert
the corresponding error when a function can fail in multiple ways.
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-2-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a path where RCU protection reaches zero and then starts again.
The iterator is untrusted after this gap and must be rejected.
Signed-off-by: Ning Ding <dingning04@gmail.com>
Link: https://patch.msgid.link/20260811035955.132989-3-dingning04@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
clock_gettime()
Both these functions can fail.
The first calls to those functions are already checked and result in
KSFT_SKIP.
If they start failing afterwards unexpectedly, report a hard error.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-17-910cbd485390@linutronix.de
|
|
The test currently defines its own custom error numbers.
These mirror the semantics from the standard KFST_* constants.
To make the code easier to read, use the standard result constants.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-16-910cbd485390@linutronix.de
|
|
The test relies on the numeric values of the clockids.
As not all clocks are meant to be tested, this requires skipping some
clocks unconditionally, cluttering the result.
Use an equivalent, explicit list instead.
In addition to CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID and
CLOCK_HWSPECIFIC which were unconditionally skipped before, this also
unconditionally skips CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_COARSE and
CLOCK_REALTIME_COARSE. clock_nanosleep() is not supported for those.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-15-910cbd485390@linutronix.de
|
|
Use the predefined symbol to make the code easier to understand.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-14-910cbd485390@linutronix.de
|
|
Currently the test for the sleep functionality itself and the one for
the remaining time are reported together. This makes the test output a
bit confusing, especially as the upcoming tests for auxiliary clocks
will have different results between the two parts.
Report each test part on its own.
This also allows continuing testing other clocks after a single one
has failed.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-13-910cbd485390@linutronix.de
|
|
An upcoming patch will remove the early exit on failure of a single
testcase. If a test fails because a timeout timer could not be deleted,
then that timeout timer might interfere with the following tettcases.
Exit the whole test case with a clear error message in this case.
Other failures are not problematic:
* If timer_settime() fails, a harmless unarmed timer is left around.
* The SIGALRM handler reconfigured for each call to
nanosleep_test_remaining() anyways.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-12-910cbd485390@linutronix.de
|
|
main()
Make the code easier to read by avoiding a goto.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-11-910cbd485390@linutronix.de
|
|
The test currently defines its own custom error numbers.
These mirror the semantics from the standard KFST_* constants.
To make the code easier to read, use the standard result constants.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-10-910cbd485390@linutronix.de
|
|
The test relies on the numeric values of the clockids.
As not all clocks are meant to be tested, this requires skipping some
clocks unconditionally, cluttering the result.
Use an equivalent, explicit list instead.
In addition to CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID and
CLOCK_HWSPECIFIC which were unconditionally skipped before, this also
unconditionally skips CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_COARSE and
CLOCK_REALTIME_COARSE. clock_nanosleep() is not supported for those.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-9-910cbd485390@linutronix.de
|
|
The padding of the clock name is pointless as nothing else is printed.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-8-910cbd485390@linutronix.de
|
|
Replace the many repetitions of custom clockid_t to string translation
with the clock_name() helper from clock-helpers.h.
Also drop the custom ?SEC_PER_?SEC definitions.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-7-910cbd485390@linutronix.de
|
|
Multiple selftests duplicate various clock-related functionality.
Add a new header to collect and deduplicate those.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-6-910cbd485390@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- Convert ELF entry point to file offset in uprobe test
Convert the ELF entry point address (e_entry) to a file offset using
LOAD segment headers in add_remove_uprobe test. This fixes uprobe
registration failures (-EINVAL) on non-PIE executables where vaddr
exceeds file size.
* tag 'probes-fixes-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Convert ELF entry point to file offset in uprobe test
|
|
Nothing in this file splices a socket whose last decrypt failed, so
the check that fails tls_sw_splice_read() on a broken connection can
be removed without a test noticing. Such a splice hands the
application plaintext that recvmsg() and read_sock() already refuse
to return.
Extend the bad_auth pattern. Corrupt an authenticated record, confirm
recvmsg() reports EBADMSG, then splice the same socket and require
EBADMSG again. A synchronous decrypt fails again on the still-queued
record, so only an async decrypt reaches EBADMSG through the
recorded-failure check alone.
bad_auth builds the same corrupted record, so its construction moves
into a helper the two tests share.
Signed-off-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260806-tls-splice-crypto-fix-v1-2-a2624005a286@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
reuseport_bpf_numa case failed when testing on a platform with CXL
memory:
#./reuseport_bpf_numa
---- IPv4 UDP ----
send node 0, receive socket 0
./reuseport_bpf_numa: failed to pin to node: Invalid argument
The root cause is that the platform has 2 numa nodes: node 0 has
both cpu and memory, while node 1 is a CXL node which only has
memory, and caused numa_run_on_node() to fail.
Add sanity check to skip cpuless numa node for the numa binding test.
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260807002436.43991-1-feng.tang@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
kernel.ftrace_enabled=0 is now refused on kernels that deprecate the
knob, so the old disable/reload flow no longer applies there. Probe
for this with ftrace_disable_supported() and keep the full original
scenario (disable, fail to load a livepatch, re-enable, load, confirm
disable is refused while loaded) on kernels where it still works;
otherwise just confirm the write is refused.
Link: https://patch.msgid.link/20260806153000.4184871-3-andrey.grodzovsky@crowdstrike.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Joe Lawrence <joe.lawrence@redhat.com>
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
bond_reset() waits up to 2 seconds for IPv6 connectivity.
With default settings DAD itself may take almost 2 seconds,
causing flakes on debug builds. It used to flake once or
twice a week, recently it started failing once a day.
Probably some downstream changes to scheduler, or our machines
go busier.
A lot of selftests already use nodad, let's use nodad in bonding, too.
I don't see an obvious reason why DAD would be important to the test.
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260808162345.2442594-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ETF qdiscs drops traffic without a socket or txtime. Even with
parameter skip_sock_check regular traffic is affected by ETF.
This test ran fine when run manually in a pure software environment.
But with drv-net across two hosts tests fail as early as when calling
cfg.remote.deploy due to effectively losing connectivity.
Isolate the intended test traffic:
- mark that with SO_MARK 100
- install a regular permissive root prio qdisc for background traffic
- install the ETF qdisc as leaf
- install a filter that only directs SO_MARK 100 traffic to this leaf
Technically other high prio traffic will map onto this leaf based on
ToS band mapping too. But that is immaterial in practice.
Fixes: 5c6baef3885c ("selftests: drv-net: convert so_txtime to drv-net")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260808160129.890119-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some devices refresh the statistics exposed via ethtool only
periodically, every stats-block-usecs (as reported by ethtool -c).
ethtool_std_stats and ethtool_rmon sample the counters immediately
after generating traffic, so on such devices they can read stale
values and fail with a delta short of the packets just sent.
Add a hw_stats_settle() helper which sleeps for 1.25x the configured
stats-block-usecs (defaulting to 20ms when the device reports no, or
a zero, period). Use it for ethtool std stats and RMON.
The 1.25x/20msec heuristic matches what the Python tests do.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260808163653.2460381-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mausezahn defaults to sending packets back to back at the maximum rate,
which can cause packet loss, especially if receiver is running a debug
kernel. Space the generated packets out (-d 10usec), like ethtool_rmon
already does.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260808163653.2460381-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The adaptive-rx and adaptive-tx checks use 'ethtool -c | grep -q' under
'set -o pipefail'. grep -q exits as soon as it finds a match, which can
happen before ethtool finishes writing its output. When that occurs,
ethtool receives SIGPIPE causing (uninformative):
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# FAILED 1/22 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
This happens on debug kernels in NIPA, ~4% of the time.
Link: https://patch.msgid.link/20260808163416.2456810-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a tdc case covering the leak fixed by the previous patch.
The test attaches "action ct" to a clsact ingress chain and injects ten
IPv6 frames whose nexthdr says hop-by-hop but which carry nothing after
the 40-byte header, so ipv6_find_hdr() fails and
tcf_ct_ipv6_is_fragment() returns -EPROTO.
Before the fix act_ct returned TC_ACT_CONSUMED for these packets, so
tc_run() never reached its TC_ACT_SHOT arm and the clsact drop counter
stayed at zero while the skbs leaked. After the fix the packets are
dropped properly and the counter reflects them, which is what the test
matches on:
before: Sent 476 bytes 11 pkt (dropped 0, overlimits 0 requeues 0)
after: Sent 400 bytes 10 pkt (dropped 10, overlimits 0 requeues 0)
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260806101235.809370-2-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next into for-7.3-arena-args
Pull bpf-next d114bb989367 ("Merge branch
'add-arena-argument-support-to-kfuncs-and-struct_ops'") to make the __arena
and __arena__nullable kfunc and struct_ops argument suffixes available. The
suffixed arguments will be used to convert sched_ext kfuncs and struct_ops
callbacks that currently pass arena pointers as scalars and rebase them by
hand.
|
|
The commit message for af8c8a450bf4 ("selftests: net: Add FIN_ACK
processing order related latency spike test") states: "if the latency
is larger than 1 second (spike), print a message". However the code
uses a threshold of 100000 us (100 ms), not 1000000 us (1 s).
The lower threshold causes false positives on slower hardware where
normal connection latency occasionally exceeds 100 ms but never
approaches the 1 s spike that indicates the actual FIN/ACK race bug.
Fix the threshold to match the documented intent.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brian Grech <bgrech@redhat.com>
Link: https://patch.msgid.link/20260806151645.4172900-1-bgrech@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
exit.c does not check the return value of exit__open(). If it returns
NULL, which happens when the skeleton wrapper fails to allocate the
object or open the BPF ELF, the very next line dereferences it via
SCX_ENUM_INIT(). That macro expands to SCX_ENUM_SET(), which accesses
skel->rodata, causing a NULL pointer dereference.
Every other selftest guards this with SCX_FAIL_IF(!skel, ...); exit.c
is the only one missing it.
Fixes: a5db7817af78 ("sched_ext: Add selftests")
Signed-off-by: Liang Luo <luoliang@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The cpuset selftests use awk -e to parse cgroup mount points. This
works with gawk, but mawk rejects the option. In test_cpuset_prs.sh,
this leaves CGROUP2 empty and causes the test to skip as if cgroup v2
were not mounted. The same non-portable invocation exists in the cpuset
v1 hotplug test.
The scripts only need to pass a single awk program. Use the standard awk
invocation without -e so mount point detection works with awk
implementations that do not support the gawk extension.
Fixes: a8c52eba880a ("kselftest/cgroup: Add cpuset v2 partition root state test")
Fixes: 812c5945bdb8 ("cgroup/cpuset: Add test_cpuset_v1_hp.sh")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Ridong Chen <ridong.chen@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add retry logic to vfio_pci_device_reset() to handle the case where PCI
resets fail due to lock contention, in which case
pci_try_reset_function() returns -EAGAIN.
Suggested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Josh Hilke <jrhilke@google.com>
Acked-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260805-igb_v3_b4-v10-3-9c86dc849c0d@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Add a VFIO selftest driver for the Intel Gigabit Ethernet controller
(IGB), specifically targeting the 82576 device. IGB is fully virtualized
in QEMU which makes it easy to run VFIO selftests without needing any
specific hardware.
Since IGB is an Ethernet device, it cannot support DMA transfers smaller
than the minimum Ethernet payload size (60 bytes) without hardware padding
corrupting adjacent memory. The driver asserts that the transfer size is
at least 60 bytes to prevent this.
All VFIO selftest drivers must implement DMA/memcpy operations, but IGB
doesn't have a native memcpy feature, so the loopback feature (described
in section 3.5.6.3 of IGB specification) is used to implement it. To
support testing on both QEMU and physical hardware, the driver uses PHY
internal loopback with some QEMU-specific fallbacks. The driver also
supports MSI-X routing and interrupt management, and disables PCIe
completion timeout retries to ensure clean recovery during invalid-DMA
tests.
Users can verify the driver works in QEMU by building the kernel,
building VFIO selftests, and then running the vfio_pci_driver_test using
this command:
vng \
--run arch/x86/boot/bzImage \
--user root \
--disable-microvm \
--memory 32G \
--cpus 8 \
--qemu-opts="-M q35,accel=kvm,kernel-irqchip=split" \
--qemu-opts="-device intel-iommu,intremap=on,caching-mode=on,device-iotlb=on" \
--qemu-opts="-netdev user,id=net0 -device igb,netdev=net0,addr=09.0" \
--append "console=ttyS0 earlyprintk=ttyS0 intel_iommu=on iommu=pt" \
--exec "modprobe vfio-pci && \
./tools/testing/selftests/vfio/scripts/setup.sh 0000:00:09.0 && \
./tools/testing/selftests/vfio/scripts/run.sh ./tools/testing/selftests/vfio/vfio_pci_driver_test"
Assisted-by: Claude:claude-opus-4-7
Assisted-by: Gemini:gemini-3.1-pro-preview
Co-developed-by: Alex Williamson <alex.williamson@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Signed-off-by: Josh Hilke <jrhilke@google.com>
Acked-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260805-igb_v3_b4-v10-2-9c86dc849c0d@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Selftest drivers that recover from a fault by issuing VFIO_DEVICE_RESET
need to re-arm device interrupts afterwards. VFIO_DEVICE_RESET tears
down the kernel-side IRQ trigger so a subsequent VFIO_DEVICE_SET_IRQS
is required, but the user-side eventfds (and any fd cached in a test
fixture) are still valid and must be preserved.
vfio_pci_irq_enable() refuses to be called for vectors that already
have an eventfd (VFIO_ASSERT_LT), and vfio_pci_irq_disable() closes
all eventfds before resetting the trigger, so neither is suitable.
Add vfio_pci_irq_reenable(device, index, vector, count) which asserts
that the requested range has existing eventfds and re-issues
VFIO_DEVICE_SET_IRQS using them. Signature mirrors vfio_pci_irq_enable().
Add vfio_pci_msi{,x}_reenable() wrappers around vfio_pci_irq_reenable()
for additional ease of use and readability.
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Acked-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260805-igb_v3_b4-v10-1-9c86dc849c0d@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Remove unused 'rplnlh' in conntrack_data_insert(), and remove unused
'rplnlh' and 'nest' variables in conntrack_count_zone() and
conntrack_flush_zone(). These variables were declared but never used
since their introduction.
Also fix typo: rename misspelled conntracK_count_zone() to
conntrack_count_zone().
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
To reduce the runtime of the PMU counters test by an order of magnitude,
create one VM per category of test (arch events, GP PMCs, fixed PMCs),
with N vCPUs per VM, where 'N' is the number of testscases to run per
category. The vast majority of the test's runtime is spent creating VMs,
because while creating a VM only takes a few milliseconds, the total time
adds up when creating hundreds of VMs. The only reason the test creates
so many VMs is because KVM disallows changing the virtual PMU model after
a vCPU runs, so rather than create an entirely new VM just to get a "fresh"
vCPUs, simply use a different vCPU.
On an Emerald Rapids host, this reduces the runtime from 75+ seconds to
less than 6 seconds.
Opportunistically fix a typo in the comment about unavailable_masks pointed
out by Like Xu[1].
Link: https://lore.kernel.org/all/20260625090155.6326-1-likexu@tencent.com[1]
Link: https://patch.msgid.link/20260804210046.3413149-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
fsopen() records the caller's user namespace in fc->user_ns and hands
back an ordinary file descriptor, so the task that issues
FSCONFIG_CMD_CREATE need not be the one that created the context.
mount_capable() authorizes that for a caller holding CAP_SYS_ADMIN in an
ancestor of fc->user_ns, which any unprivileged user has over a user
namespace it just created.
binfmt_misc and overlayfs used to WARN_ON() the mismatch. Add a test for
both. Also cover the handover within one user namespace. That is a
supported thing to do and has to keep working.
Link: https://patch.msgid.link/20260802-work-fill_super-warn-v1-3-4e987911a39a@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Add FPU/LSX/LASX test cases and verify FPU register get and set APIs,
the FPU width supports 64/128/256 bits.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add LSX and LASX features when VM is created. These features are detected
firstly, enable it if it is available on host machine.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In order to support preempt_disable()-like interrupt disabling, that is,
using part of preempt_count() to track interrupt disabling nesting
level, change the preempt_count() layout to contain 8-bit
HARDIRQ_DISABLE count.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121223933.1568682-2-lyude@redhat.com
Link: https://patch.msgid.link/20260804161447.84806-3-boqun@kernel.org
|
|
Move NMI nesting tracking from the preempt_count bits to a separate
per-CPU counter (nmi_nesting). This is to free up the NMI bits in the
preempt_count, allowing those bits to be repurposed for other uses.
Reduce NMI_BITS from 4 to 1, using it only to detect if we're in an NMI.
The per-CPU counter currently caps nesting at 15.
[boqun: Address Steven Rostedt's comment on the BUG_ON() condition]
[boqun: Use preempt_count_set() in __nmi_exit() to avoid underflow]
Suggested-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121223933.1568682-3-lyude@redhat.com
Link: https://patch.msgid.link/20260804161447.84806-2-boqun@kernel.org
|
