| Age | Commit message (Collapse) | Author |
|---|
|
scx_select_cpu_dfl() narrows @allowed to @cpus_allowed & @p->cpus_ptr
when the BPF caller supplies a @cpus_allowed that differs from
@p->cpus_ptr and @p doesn't have full affinity. However,
@is_prev_allowed was computed against the original (wider)
@cpus_allowed, so the prev_cpu fast paths could pick a @prev_cpu that
is in @cpus_allowed but not in @p->cpus_ptr, violating the intended
invariant that the returned CPU is always usable by @p. The kernel
masks this via the SCX_EV_SELECT_CPU_FALLBACK fallback, but the
behavior contradicts the documented contract.
Move the @is_prev_allowed evaluation past the narrowing block so it
tests against the final @allowed mask.
Fixes: ee9a4e92799d ("sched_ext: idle: Properly handle invalid prev_cpu during idle selection")
Cc: stable@vger.kernel.org # v6.16+
Assisted-by: Claude <noreply@anthropic.com>
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Unify to uppercase to match the UEI output.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
sysrq_handle_sched_ext_reset()
sysrq_handle_sched_ext_reset() is called from __handle_sysrq(), which
already holds rcu_read_lock() while invoking the sysrq handler. Remove
the redundant rcu_read_lock/unlock() pair.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
scx_task_iter's cgroup-scoped mode can return tasks whose
sched_ext_dead() has already completed: cgroup_task_dead() removes
from cset->tasks after sched_ext_dead() in finish_task_switch() and is
irq-work deferred on PREEMPT_RT. The global mode is fine -
sched_ext_dead() removes from scx_tasks via list_del_init() first.
Callers (sub-sched enable prep/abort/apply, scx_sub_disable(),
scx_fail_parent()) assume returned tasks are still on @sch and trip
WARN_ON_ONCE() or operate on torn-down state otherwise.
Set %SCX_TASK_OFF_TASKS in sched_ext_dead() under @p's rq lock and
have scx_task_iter_next_locked() skip flagged tasks under the same
lock. Setter and reader serialize on the per-task rq lock - no race.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup") made
css_task_iter_advance() skip exiting tasks so cgroup.procs stays consistent
with waitpid() visibility. Unfortunately, this broke scx_task_iter.
scx_task_iter walks either scx_tasks (global) or a cgroup subtree via
css_task_iter() and the two modes are expected to cover the same set of
tasks. After the above change the cgroup-scoped mode silently skips tasks
past exit_signals() that are still on scx_tasks.
scx_sub_enable_workfn()'s abort path is one of the symptoms: an exiting
SCX_TASK_SUB_INIT task can race past the cgroup iter leaking
__scx_init_task() state. Other iterations share the same gap.
Add CSS_TASK_ITER_WITH_DEAD to opt out of the skip and use it from
scx_task_iter().
Fixes: b0e4c2f8a0f0 ("sched_ext: Implement cgroup subtree iteration for scx_task_iter")
Reported-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix the delayed dequeue negative lag increase fix in the
fair scheduler (Peter Zijlstra)
- Fix wakeup_preempt_fair() to do proper delayed dequeue
(Vincent Guittot)
- Clear sched_entity::rel_deadline when initializing
forked entities, which bug can cause all tasks to be
EEVDF-ineligible, causing a NULL pointer dereference
crash in pick_next_entity() (Zicheng Qu)
* tag 'sched-urgent-2026-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Clear rel_deadline when initializing forked entities
sched/fair: Fix wakeup_preempt_fair() vs delayed dequeue
sched/fair: Fix the negative lag increase fix
|
|
Sub-scheduler support is tied to the cid-form struct_ops: sub_attach /
sub_detach will communicate allocation via cmask, and the hierarchy assumes
all participants share a single topological cid space. A cpu-form root that
accepts sub-scheds would need cpu <-> cid translation on every cross-sched
interaction, defeating the purpose.
Enforce this at validate_ops():
- A sub-scheduler (scx_parent(sch) non-NULL) must be cid-form.
- A root that exposes sub_attach / sub_detach must be cid-form.
scx_qmap, which is currently the only scheduler demoing sub-sched support,
was converted to cid-form in the preceding patch, so this doesn't cause
breakage.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
cid and cpu are both small s32s, trivially confused when a cid-form
scheduler calls a cpu-keyed kfunc. Reject cid-form programs that
reference any kfunc in the new scx_kfunc_ids_cpu_only at verifier load
time.
The reverse direction is intentionally permissive: cpu-form schedulers
can freely call cid-form kfuncs to ease a gradual cpumask -> cid
migration.
The check sits in scx_kfunc_context_filter() right after the SCX
struct_ops gate and before the any/idle allow and per-op allow-list
checks, so it catches cpu-only kfuncs regardless of which set they
belong to (any, idle, or select_cpu).
v2: Sync per-entry kfunc flags with their primary declarations (Zhao).
pahole intersects flags across BTF_ID_FLAGS() occurrences, so
omitting them drops the flags globally.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
cpumask is awkward from BPF and unusable from arena; cid/cmask work in
both. Sub-sched enqueue will need cmask. Without a full cid interface,
schedulers end up mixing forms - a subtle-bug factory.
Add sched_ext_ops_cid, which mirrors sched_ext_ops with cid/cmask
replacing cpu/cpumask in the topology-carrying callbacks.
cpu_acquire/cpu_release are deprecated and absent; a prior patch
moved them past @priv so the cid-form can omit them without
disturbing shared-field offsets.
The two structs share byte-identical layout up to @priv, so the
existing bpf_scx init/check hooks, has_op bitmap, and
scx_kf_allow_flags[] are offset-indexed and apply to both.
BUILD_BUG_ON in scx_init() pins the shared-field and renamed-callback
offsets so any future drift trips at boot.
The kernel<->BPF boundary translates between cpu and cid:
- A static key, enabled on cid-form sched load, gates the translation
so cpu-form schedulers pay nothing.
- dispatch, update_idle, cpu_online/offline and dump_cpu translate
the cpu arg at the callsite.
- select_cpu also translates the returned cid back to a cpu.
- set_cpumask is wrapped to synthesize a cmask in a per-cpu scratch
before calling the cid-form callback.
All scheds in a hierarchy share one form. The static key drives the
hot-path branch.
v2: Use struct_size() for the set_cmask_scratch percpu alloc. Move
cid-shard fields and assertions into the later cid-shard patch.
v3: Drop `static` on scx_set_cmask_scratch; add extern in ext_internal.h.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
cpumask is awkward from BPF and unusable from arena; cid/cmask work in
both. Sub-sched enqueue will need cmask. Without full cid coverage a
scheduler has to mix cid and cpu forms, which is a subtle-bug factory.
Close the gap with a cid-native interface.
Pair every cpu-form kfunc that takes a cpu id with a cid-form
equivalent (kick, task placement, cpuperf query/set, per-cpu current
task, nr-cpu-ids). Add two cid-natives with no cpu-form sibling:
scx_bpf_this_cid() (cid of the running cpu, scx equivalent of
bpf_get_smp_processor_id) and scx_bpf_nr_online_cids().
scx_bpf_cpu_rq is deprecated; no cid-form counterpart. NUMA node info
is reachable via scx_bpf_cid_topo() on the BPF side.
Each cid-form wrapper is a thin cid -> cpu translation that delegates
to the cpu path, registered in the same context sets so usage
constraints match.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Sub-scheduler code built on cids needs bitmaps scoped to a slice of cid
space (e.g. the idle cids of a shard). A cpumask sized for NR_CPUS wastes
most of its bits for a small window and is awkward in BPF.
scx_cmask covers [base, base + nr_bits). bits[] is aligned to the global
64-cid grid: bits[0] spans [base & ~63, (base & ~63) + 64). Any two
cmasks therefore address bits[] against the same global windows, so
cross-cmask word ops reduce to
dest->bits[i] OP= operand->bits[i - delta]
with no bit-shifting, at the cost of up to one extra storage word for
head misalignment. This alignment guarantee is the reason binary ops
can stay word-level; every mutating helper preserves it.
Kernel side in ext_cid.[hc]; BPF side in tools/sched_ext/include/scx/
cid.bpf.h. BPF side drops the scx_ prefix (redundant in BPF code) and
adds the extra helpers that basic idle-cpu selection needs.
No callers yet.
v2: Narrow to helpers that will be used in the planned changes;
set/bit/find/zero ops will be added as usage develops.
v3: cmask_copy_from_kernel: validate src->base == 0 via probe-read;
bit-level nr_bits check instead of round-up word count. (Sashiko)
v4: Bump CMASK_CAS_TRIES to 1<<23 so abort fires only after seconds
of real spinning, not on plausible contention. Switch
__builtin_ctzll() to the ctzll() wrapper for clang compat
(Changwoo).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The auto-probed cid mapping reflects the kernel's view of topology
(node -> LLC -> core), but a BPF scheduler may want a different layout -
to align cid slices with its own partitioning, or to work around how the
kernel reports a particular machine.
Add scx_bpf_cid_override(), callable from ops.init() of the root
scheduler. It validates the caller-supplied cpu->cid array and replaces
the in-place mapping; topo info is invalidated. A compat.bpf.h wrapper
silently no-ops on kernels that lack the kfunc.
A new SCX_KF_ALLOW_INIT bit in the kfunc context filter restricts the
kfunc to ops.init() at verifier load time.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
|
|
Raw cpu numbers are clumsy for sharding and cross-sched communication,
especially from BPF. The space is sparse, numerical closeness doesn't
track topological closeness (x86 hyperthreading often scatters SMT
siblings), and a range of cpu ids doesn't describe anything meaningful.
Sub-sched support makes this acute: cpu allocation, revocation, and
state constantly flow across sub-scheds. Passing whole cpumasks scales
poorly (every op scans 4K bits) and cpumasks are awkward in BPF.
cids assign every cpu a dense, topology-ordered id. CPUs sharing a core,
LLC, or NUMA node occupy contiguous cid ranges, so a topology unit
becomes a (start, length) slice. Communication passes slices; BPF can
process a u64 word of cids at a time.
Build the mapping once at root enable by walking online cpus node -> LLC
-> core. Possible-but-not-online cpus tail the space with no-topo cids.
Expose kfuncs to map cpu <-> cid in either direction and to query each
cid's topology metadata.
v2: Use kzalloc_objs()/kmalloc_objs() for the three allocs in
scx_cid_arrays_alloc() (Cheng-Yang Chou).
v3: scx_cid_init() failure path now drops cpus_read_lock();
BUILD_BUG_ON tightened to match BPF cmask helpers' NR_CPUS<=8192.
(Sashiko)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Pass struct scx_enable_cmd to scx_enable() rather than unpacking @ops
at every call site and re-packing into a fresh cmd inside. bpf_scx_reg()
now builds the cmd on its stack and hands it in; scx_enable() just
wires up the kthread work and waits.
Relocate struct scx_enable_cmd above scx_alloc_and_add_sched() so
upcoming patches that also want the cmd can see it.
No behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
cpu_acquire and cpu_release are deprecated and slated for removal. Move
their declarations to the end of struct sched_ext_ops so an upcoming
cid-form struct (sched_ext_ops_cid) can omit them entirely without
disturbing the offsets of the shared fields.
Switch the two SCX_HAS_OP() callers for these ops to direct field checks
since the relocated ops sit outside the SCX_OPI_END range covered by the
has_op bitmap.
scx_kf_allow_flags[] auto-sizes to the highest used SCX_OP_IDX, so
SCX_OP_IDX(cpu_release) moving to a higher index just enlarges the
sparse array; the lookup logic is unchanged.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Callers that already know the cpu is valid shouldn't have to pay for a
redundant check. scx_kick_cpu() is called from the in-kernel balance loop
break-out path with the current cpu (trivially valid) and from
scx_bpf_kick_cpu() with a BPF-supplied cpu that does need validation. Move
the check out of scx_kick_cpu() into scx_bpf_kick_cpu() so the backend is
reusable by callers that have already validated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Things shared across multiple .c files belong in a header. scx_exit() /
scx_error() (and their scx_vexit() / scx_verror() siblings) are already
called from ext_idle.c and the upcoming ext_cid.c, and it was only
build_policy.c's textual inclusion of ext.c that made the references
resolve. Move the whole family to ext_internal.h.
Pure visibility change.
v4: Rebased over the exit_cpu plumbing. scx_exit() and scx_verror()
are now macros wrapping raw_smp_processor_id(); move both macros
plus the underlying __scx_exit() / scx_vexit() declarations to
the header.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Rename the static ext.c helper and declare it in ext_internal.h so
ext_idle.c and the upcoming cid code can call it directly instead of
relying on build_policy.c textual inclusion.
Pure rename and visibility change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Introduce kernel/sched/ext_types.h as the early-def header for the
sched_ext compilation unit. Included from kernel/sched/build_policy.c
before ext_internal.h so every later header and source in the unit
sees its content without re-inclusion. Later patches add their types
here (struct scx_cid_topo, scx_cmask, scx_cid_shard, etc.) so the
subsystem has one place to stash types shared across the TU.
Move enum scx_consts (SCX_DSP_DFL_MAX_BATCH, SCX_WATCHDOG_MAX_TIMEOUT,
SCX_SUB_MAX_DEPTH, etc.) here as the initial content. Ops-facing
content stays in ext_internal.h.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
When sched_ext is disabled by an error, the CPU that triggered the exit
is the most relevant piece of information for diagnosing the problem.
However, if there are many CPUs, the dump can get truncated and that
CPU's information may not appear in the output.
Add an exit_cpu field to scx_exit_info and thread it through scx_vexit()
/ __scx_exit(). For the watchdog stall path, populate it from cpu_of(rq)
in check_rq_for_timeouts(). For all other exit paths, define a scx_exit()
macro that wraps __scx_exit() with raw_smp_processor_id(), so the CPU
that initiated the exit is captured automatically, with no call-site
changes needed.
In scx_dump_state(), report the exit CPU in the dump header ("on cpu N")
and dump that CPU first, skipping it in the per-CPU loop, so the most
relevant CPU is never truncated out of the dump. The SysRq-D path
initializes exit_cpu to -1 so debug dumps not tied to an exit don't
arbitrarily promote CPU 0.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Factor out the per-CPU state dump logic from the for_each_possible_cpu
loop in scx_dump_state() into a new scx_dump_cpu() helper to improve
readability. No functional change.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"The merge window pulled in the cgroup sub-scheduler infrastructure,
and new AI reviews are accelerating bug reporting and fixing - hence
the larger than usual fixes batch:
- Use-after-frees during scheduler load/unload:
- The disable path could free the BPF scheduler while deferred
irq_work / kthread work was still in flight
- cgroup setter callbacks read the active scheduler outside the
rwsem that synchronizes against teardown
Fix both, and reuse the disable drain in the enable error paths so
the BPF JIT page can't be freed under live callbacks.
- Several BPF op invocations didn't tell the framework which runqueue
was already locked, so helper kfuncs that re-acquire the runqueue
by CPU could deadlock on the held lock
Fix the affected callsites, including recursive parent-into-child
dispatch.
- The hardlockup notifier ran from NMI but eventually took a
non-NMI-safe lock. Bounce it through irq_work.
- A handful of bugs in the new sub-scheduler hierarchy:
- helper kfuncs hard-coded the root instead of resolving the
caller's scheduler
- the enable error path tried to disable per-task state that had
never been initialized, and leaked cpus_read_lock on the way
out
- a sysfs object was leaked on every load/unload
- the dispatch fast-path used the root scheduler instead of the
task's
- a couple of CONFIG #ifdef guards were misclassified
- Verifier-time hardening: BPF programs of unrelated struct_ops types
(e.g. tcp_congestion_ops) could call sched_ext kfuncs - a semantic
bug and, once sub-sched was enabled, a KASAN out-of-bounds read.
Now rejected at load. Plus a few NULL and cross-task argument
checks on sched_ext kfuncs, and a selftest covering the new deny.
- rhashtable (Herbert): restore the insecure_elasticity toggle and
bounce the deferred-resize kick through irq_work to break a
lock-order cycle observable from raw-spinlock callers. sched_ext's
scheduler-instance hash is the first user of both.
- The bypass-mode load balancer used file-scope cpumasks; with
multiple scheduler instances now possible, those raced. Move to
per-instance cpumasks, plus a follow-up to skip tasks whose
recorded CPU is stale relative to the new owning runqueue.
- Smaller fixes:
- a dispatch queue's first-task tracking misbehaved when a parked
iterator cursor sat in the list
- the runqueue's next-class wasn't promoted on local-queue
enqueue, leaving an SCX task behind RT in edge cases
- the reference qmap scheduler stopped erroring on legitimate
cross-scheduler task-storage misses"
* tag 'sched_ext-for-7.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (26 commits)
sched_ext: Fix scx_flush_disable_work() UAF race
sched_ext: Call wakeup_preempt() in local_dsq_post_enq()
sched_ext: Release cpus_read_lock on scx_link_sched() failure in root enable
sched_ext: Reject NULL-sch callers in scx_bpf_task_set_slice/dsq_vtime
sched_ext: Refuse cross-task select_cpu_from_kfunc calls
sched_ext: Align cgroup #ifdef guards with SUB_SCHED vs GROUP_SCHED
sched_ext: Make bypass LB cpumasks per-scheduler
sched_ext: Pass held rq to SCX_CALL_OP() for core_sched_before
sched_ext: Pass held rq to SCX_CALL_OP() for dump_cpu/dump_task
sched_ext: Save and restore scx_locked_rq across SCX_CALL_OP
sched_ext: Use dsq->first_task instead of list_empty() in dispatch_enqueue() FIFO-tail
sched_ext: Resolve caller's scheduler in scx_bpf_destroy_dsq() / scx_bpf_dsq_nr_queued()
sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters
sched_ext: Don't disable tasks in scx_sub_enable_workfn() abort path
sched_ext: Skip tasks with stale task_rq in bypass_lb_cpu()
sched_ext: Guard scx_dsq_move() against NULL kit->dsq after failed iter_new
sched_ext: Unregister sub_kset on scheduler disable
sched_ext: Defer scx_hardlockup() out of NMI
sched_ext: sync disable_irq_work in bpf_scx_unreg()
sched_ext: Fix local_dsq_post_enq() to use task's scheduler in sub-sched
...
|
|
scx_flush_disable_work() calls irq_work_sync() followed by
kthread_flush_work() to ensure that the disable kthread work has
fully completed before bpf_scx_unreg() frees the SCX scheduler.
However, a concurrent scx_vexit() (e.g., triggered by a watchdog stall)
creates a race window between scx_claim_exit() and irq_work_queue():
CPU A (scx_vexit (watchdog)) CPU B (bpf_scx_unreg)
---- ----
scx_claim_exit()
atomic_try_cmpxchg(NONE->kind)
stack_trace_save()
vscnprintf()
scx_disable()
scx_claim_exit() -> FAIL
scx_flush_disable_work()
irq_work_sync() // no-op: not queued yet
kthread_flush_work() // no-op: not queued yet
kobject_put(&sch->kobj) -> free %sch
irq_work_queue() -> UAF on %sch
scx_disable_irq_workfn()
kthread_queue_work() -> UAF
The root cause is that CPU B's scx_flush_disable_work() returns after
syncing an irq_work that has not yet been queued, while CPU A is still
executing the code between scx_claim_exit() and irq_work_queue().
Loop until exit_kind reaches SCX_EXIT_DONE or SCX_EXIT_NONE, draining
disable_irq_work and disable_work in each pass. This ensures that any
work queued after the previous check is caught, while also correctly
handling cases where no disable was triggered (e.g., the
scx_sub_enable_workfn() abort path).
Fixes: 510a27055446 ("sched_ext: sync disable_irq_work in bpf_scx_unreg()")
Reported-by: https://sashiko.dev/#/patchset/20260424100221.32407-1-icheng%40nvidia.com
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Move <linux/btf_ids.h> from ext.c and "ext_idle.h" from ext.c (plus its
self-include in ext_idle.c) into build_policy.c. Subsequent patches add
their headers the same way for consistency.
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
There are several edge cases (see linked thread) where an IMMED task
can be left lingering on a local DSQ if an RT task swoops in at the
wrong time. All of these edge cases are due to rq->next_class being idle
even after dispatching a task to rq's local DSQ. We should bump
rq->next_class to &ext_sched_class as soon as we've inserted a task into
the local DSQ.
To optimize the common case of rq->next_class == &ext_sched_class,
only call wakeup_preempt() if rq->next_class is below EXT. If next_class
is EXT or above, wakeup_preempt() is a no-op anyway.
This lets us also simplify the preempt_curr() logic a bit since
wakeup_preempt() will call preempt_curr() for us if next_class is
below EXT.
Link: https://lore.kernel.org/all/DHZPHUFXB4N3.2RY28MUEWBNYK@google.com/
Signed-off-by: Kuba Piecuch <jpiecuch@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
A yield-triggered crash can happen when a newly forked sched_entity
enters the fair class with se->rel_deadline unexpectedly set.
The failing sequence is:
1. A task is forked while se->rel_deadline is still set.
2. __sched_fork() initializes vruntime, vlag and other sched_entity
state, but does not clear rel_deadline.
3. On the first enqueue, enqueue_entity() calls place_entity().
4. Because se->rel_deadline is set, place_entity() treats se->deadline
as a relative deadline and converts it to an absolute deadline by
adding the current vruntime.
5. However, the forked entity's deadline is not a valid inherited
relative deadline for this new scheduling instance, so the conversion
produces an abnormally large deadline.
6. If the task later calls sched_yield(), yield_task_fair() advances
se->vruntime to se->deadline.
7. The inflated vruntime is then used by the following enqueue path,
where the vruntime-derived key can overflow when multiplied by the
entity weight.
8. This corrupts cfs_rq->sum_w_vruntime, breaks EEVDF eligibility
calculation, and can eventually make all entities appear ineligible.
pick_next_entity() may then return NULL unexpectedly, leading to a
later NULL dereference.
A captured trace shows the effect clearly. Before yield, the entity's
vruntime was around:
9834017729983308
After yield_task_fair() executed:
se->vruntime = se->deadline
the vruntime jumped to:
19668035460670230
and the deadline was later advanced further to:
19668035463470230
This shows that the deadline had already become abnormally large before
yield_task_fair() copied it into vruntime.
rel_deadline is only meaningful when se->deadline really carries a
relative deadline that still needs to be placed against vruntime. A
freshly forked sched_entity should not inherit or retain this state.
Clear se->rel_deadline in __sched_fork(), together with the other
sched_entity runtime state, so that the first enqueue does not interpret
the new entity's deadline as a stale relative deadline.
Fixes: 82e9d0456e06 ("sched/fair: Avoid re-setting virtual deadline on 'migrations'")
Analyzed-by: Hui Tang <tanghui20@huawei.com>
Analyzed-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260424071113.1199600-1-quzicheng@huawei.com
|
|
Similar to how pick_next_entity() must dequeue delayed entities, so too must
wakeup_preempt_fair(). Any delayed task being found means it is eligible and
hence past the 0-lag point, ready for removal.
Worse, by not removing delayed entities from consideration, it can skew the
preemption decision, with the end result that a short slice wakeup will not
result in a preemption.
tip/sched/core tip/sched/core +this patch
cyclictest slice (ms) (default)2.8 8 8
hackbench slice (ms) (default)2.8 20 20
Total Samples | 22559 22595 22683
Average (us) | 157 64( 59%) 59( 8%)
Median (P50) (us) | 57 57( 0%) 58(- 2%)
90th Percentile (us) | 64 60( 6%) 60( 0%)
99th Percentile (us) | 2407 67( 97%) 67( 0%)
99.9th Percentile (us) | 3400 2288( 33%) 727( 68%)
Maximum (us) | 5037 9252(-84%) 7461( 19%)
Fixes: f12e148892ed ("sched/fair: Prepare pick_next_task() for delayed dequeue")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260422093400.319251-1-vincent.guittot@linaro.org
|
|
Vincent reported that my rework of his original patch lost a little
something.
Specifically it got the return value wrong; it should not compare
against the old se->vlag, but rather against the current value. Since
the thing that matters is if the effective vruntime of an entity is
affected and the thing needs repositioning or not.
Fixes: 059258b0d424 ("sched/fair: Prevent negative lag increase during delayed dequeue")
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260423094107.GT3102624%40noisy.programming.kicks-ass.net
|
|
Pull to receive:
c0e8ddc76d54 ("sched_ext: Align cgroup #ifdef guards with SUB_SCHED vs GROUP_SCHED")
which conflicts with:
41e3312861ea ("sched_ext: add p->scx.tid and SCX_OPS_TID_TO_TASK lookup")
It's a simple context conflict. Take changes from both.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
scx_root_enable_workfn() takes cpus_read_lock() before
scx_link_sched(sch), but the `if (ret) goto err_disable` on failure
skips the matching cpus_read_unlock() - all other err_disable gotos
along this path drop the lock first.
scx_link_sched() only returns non-zero on the sub-sched path
(parent != NULL), so the leak path is unreachable via the root
caller today. Still, the unwind is out of line with the surrounding
paths.
Drop cpus_read_lock() before goto err_disable.
v2: Correct Fixes: tag (Andrea Righi).
Fixes: 25037af712eb ("sched_ext: Add rhashtable lookup for sub-schedulers")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
scx_prog_sched(aux) returns NULL for TRACING / SYSCALL BPF progs that
have no struct_ops association when the root scheduler has sub_attach
set. scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() pass
that NULL into scx_task_on_sched(sch, p), which under
CONFIG_EXT_SUB_SCHED is rcu_access_pointer(p->scx.sched) == sch. For
any non-scx task p->scx.sched is NULL, so NULL == NULL returns true
and the authority gate is bypassed - a privileged but
non-struct_ops-associated prog can poke p->scx.slice /
p->scx.dsq_vtime on arbitrary tasks.
Reject !sch up front so the gate only admits callers with a resolved
scheduler.
Fixes: 245d09c594ea ("sched_ext: Enforce scheduler ownership when updating slice and dsq_vtime")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
select_cpu_from_kfunc() skipped pi_lock for @p when called from
ops.select_cpu() or another rq-locked SCX op, assuming the held lock
protects @p. scx_bpf_select_cpu_dfl() / __scx_bpf_select_cpu_and() accept an
arbitrary KF_RCU task_struct, so a caller in e.g. ops.select_cpu(p1) or
ops.enqueue(p1) can pass some other p2 - the held pi_lock / rq lock is p1's,
not p2's - and reading p2->cpus_ptr / nr_cpus_allowed races with
set_cpus_allowed_ptr() and migrate_disable_switch() on another CPU.
Abort the scheduler on cross-task calls in both branches: for
ops.select_cpu() use scx_kf_arg_task_ok() to verify @p is the wake-up
task recorded in current->scx.kf_tasks[] by SCX_CALL_OP_TASK_RET();
for other rq-locked SCX ops compare task_rq(p) against scx_locked_rq().
v2: Switch the in_select_cpu cross-task check from direct_dispatch_task
comparison to scx_kf_arg_task_ok(). The former spuriously rejects when
ops.select_cpu() calls scx_bpf_dsq_insert() first, then calls
scx_bpf_select_cpu_*() on the same task. (Andrea Righi)
Fixes: 0022b328504d ("sched_ext: Decouple kfunc unlocked-context check from kf_mask")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrea Righi <arighi@nvidia.com>
|
|
Two EXT_GROUP_SCHED/SUB_SCHED guards are misclassified:
- scx_root_enable_workfn()'s cgroup_get(cgrp) and the err_put_cgrp unwind
in scx_alloc_and_add_sched() are under `#if GROUP || SUB`, but the
matching cgroup_put() in scx_sched_free_rcu_work() is inside `#ifdef SUB`
only (via sch->cgrp, stored only under SUB). GROUP-only would leak a
reference on every root-sched enable.
- sch_cgroup() / set_cgroup_sched() live under `#if GROUP || SUB` but touch
SUB-only fields (sch->cgrp, cgroup->scx_sched). GROUP-only wouldn't
compile.
GROUP needs CGROUP_SCHED; SUB needs only CGROUPS. CGROUPS=y/CGROUP_SCHED=n
gives the reachable GROUP=n, SUB=y combination; GROUP=y, SUB=n isn't
reachable today (SUB is def_bool y under CGROUPS). Neither miscategorization
triggers a real bug in any reachable config, but keep the guards honest:
- Narrow cgroup_get and err_put_cgrp to `#ifdef SUB` (matches the free-side
put).
- Move sch_cgroup() and set_cgroup_sched() to a separate `#ifdef SUB` block
with no-op stubs for the !SUB case; keep root_cgroup() and scx_cgroup_{
lock,unlock}() under `#if GROUP || SUB` since those only need cgroup core.
Fixes: ebeca1f930ea ("sched_ext: Introduce cgroup sub-sched support")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_bypass_lb_{donee,resched}_cpumask were file-scope statics shared by all
scheduler instances. With CONFIG_EXT_SUB_SCHED, multiple sched instances
each arm their own bypass_lb_timer; concurrent bypass_lb_node() calls RMW
the global cpumasks with no lock, corrupting donee/resched decisions.
Move the cpumasks into struct scx_sched, allocate them alongside the timer
in scx_alloc_and_add_sched(), free them in scx_sched_free_rcu_work().
Fixes: 95d1df610cdc ("sched_ext: Implement load balancer for bypass mode")
Cc: stable@vger.kernel.org # v6.19+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_prio_less() runs from core-sched's pick_next_task() path with rq
locked but invokes ops.core_sched_before() with NULL locked_rq, leaving
scx_locked_rq_state NULL. If the BPF callback calls a kfunc that
re-acquires rq based on scx_locked_rq() - e.g. scx_bpf_cpuperf_set(cpu)
- it re-acquires the already-held rq.
Pass task_rq(a).
Fixes: 7b0888b7cc19 ("sched_ext: Implement core-sched support")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_dump_state() walks CPUs with rq_lock_irqsave() held and invokes
ops.dump_cpu / ops.dump_task with NULL locked_rq, leaving
scx_locked_rq_state NULL. If the BPF callback calls a kfunc that
re-acquires rq based on scx_locked_rq() - e.g. scx_bpf_cpuperf_set(cpu)
- it re-acquires the already-held rq.
Pass the held rq to SCX_CALL_OP(). Thread it into scx_dump_task() too.
The pre-loop ops.dump call runs before rq_lock_irqsave() so keeps
rq=NULL.
Fixes: 07814a9439a3 ("sched_ext: Print debug dump after an error exit")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
SCX_CALL_OP{,_RET}() unconditionally clears scx_locked_rq_state to NULL on
exit. Correct at the top level, but ops can recurse via
scx_bpf_sub_dispatch(): a parent's ops.dispatch calls the helper, which
invokes the child's ops.dispatch under another SCX_CALL_OP. When the inner
call returns, the NULL clobbers the outer's state. The parent's BPF then
calls kfuncs like scx_bpf_cpuperf_set() which read scx_locked_rq()==NULL and
re-acquire the already-held rq.
Snapshot scx_locked_rq_state on entry and restore on exit. Rename the rq
parameter to locked_rq across all SCX_CALL_OP* macros so the snapshot local
can be typed as 'struct rq *' without colliding with the parameter token in
the expansion. SCX_CALL_OP_TASK{,_RET}() and SCX_CALL_OP_2TASKS_RET() funnel
through the two base macros and inherit the fix.
Fixes: 4f8b122848db ("sched_ext: Add basic building blocks for nested sub-scheduler dispatching")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
FIFO-tail
dispatch_enqueue()'s FIFO-tail path used list_empty(&dsq->list) to decide
whether to set dsq->first_task on enqueue. dsq->list can contain parked BPF
iterator cursors (SCX_DSQ_LNODE_ITER_CURSOR), so list_empty() is not a
reliable "no real task" check. If the last real task is unlinked while a
cursor is parked, first_task becomes NULL; the next FIFO-tail enqueue then
sees list_empty() == false and skips the first_task update, leaving
scx_bpf_dsq_peek() returning NULL for a non-empty DSQ.
Test dsq->first_task directly, which already tracks only real tasks and is
maintained under dsq->lock.
Fixes: 44f5c8ec5b9a ("sched_ext: Add lockless peek operation for DSQs")
Cc: stable@vger.kernel.org # v6.19+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Cc: Ryan Newton <newton@meta.com>
|
|
scx_bpf_dsq_nr_queued()
scx_bpf_create_dsq() resolves the calling scheduler via scx_prog_sched(aux)
and inserts the new DSQ into that scheduler's dsq_hash. Its inverse
scx_bpf_destroy_dsq() and the query helper scx_bpf_dsq_nr_queued() were
hard-coded to rcu_dereference(scx_root), so a sub-scheduler could only
destroy or query DSQs in the root scheduler's hash - never its own. If the
root had a DSQ with the same id, the sub-sched silently destroyed it and the
root aborted on the next dispatch ("invalid DSQ ID 0x0..").
Take a const struct bpf_prog_aux *aux via KF_IMPLICIT_ARGS and resolve the
scheduler with scx_prog_sched(aux), matching scx_bpf_create_dsq().
Fixes: ebeca1f930ea ("sched_ext: Introduce cgroup sub-sched support")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_group_set_{weight,idle,bandwidth}() cache scx_root before acquiring
scx_cgroup_ops_rwsem, so the pointer can be stale by the time the op runs.
If the loaded scheduler is disabled and freed (via RCU work) and another is
enabled between the naked load and the rwsem acquire, the reader sees
scx_cgroup_enabled=true (the new scheduler's) but dereferences the freed one
- UAF on SCX_HAS_OP(sch, ...) / SCX_CALL_OP(sch, ...).
scx_cgroup_enabled is toggled only under scx_cgroup_ops_rwsem write
(scx_cgroup_{init,exit}), so reading scx_root inside the rwsem read section
correlates @sch with the enabled snapshot.
Fixes: a5bd6ba30b33 ("sched_ext: Use cgroup_lock/unlock() to synchronize against cgroup operations")
Cc: stable@vger.kernel.org # v6.18+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_sub_enable_workfn()'s prep loop calls __scx_init_task(sch, p, false)
without transitioning task state, then sets SCX_TASK_SUB_INIT. If prep fails
partway, the abort path runs __scx_disable_and_exit_task(sch, p) on the
marked tasks. Task state is still the parent's ENABLED, so that dispatches
to the SCX_TASK_ENABLED arm and calls scx_disable_task(sch, p) - i.e.
child->ops.disable() - for tasks on which child->ops.enable() never ran. A
BPF sub-scheduler allocating per-task state in enable/freeing in disable
would operate on uninitialized state.
The dying-task branch in scx_disable_and_exit_task() has the same problem,
and scx_enabling_sub_sched was cleared before the abort cleanup loop - a
task exiting during cleanup tripped the WARN and skipped both ops.exit_task
and the SCX_TASK_SUB_INIT clear, leaking per-task resources and leaving the
task stuck.
Introduce scx_sub_init_cancel_task() that calls ops.exit_task with
cancelled=true - matching what the top-level init path does when init_task
itself returns -errno. Use it in the abort loop and in the dying-task
branch. scx_enabling_sub_sched now stays set until the abort loop finishes
clearing SUB_INIT, so concurrent exits hitting the dying-task branch can
still find @sch. That branch also clears SCX_TASK_SUB_INIT unconditionally
when seen, leaving the task unmarked even if the WARN fires.
Fixes: 337ec00b1d9c ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
bypass_lb_cpu() transfers tasks between per-CPU bypass DSQs without
migrating them - task_cpu() only updates when the donee later consumes the
task via move_remote_task_to_local_dsq(). If the LB timer fires again before
consumption and the new DSQ becomes a donor, @p is still on the previous CPU
and task_rq(@p) != donor_rq. @p can't be moved without its own rq locked.
Skip such tasks.
Fixes: 95d1df610cdc ("sched_ext: Implement load balancer for bypass mode")
Cc: stable@vger.kernel.org # v6.19+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
bpf_iter_scx_dsq_new() clears kit->dsq on failure and
bpf_iter_scx_dsq_{next,destroy}() guard against that. scx_dsq_move() doesn't -
it dereferences kit->dsq immediately, so a BPF program that calls
scx_bpf_dsq_move[_vtime]() after a failed iter_new oopses the kernel.
Return false if kit->dsq is NULL.
Fixes: 4c30f5ce4f7a ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
When ops.sub_attach is set, scx_alloc_and_add_sched() creates sub_kset as a
child of &sch->kobj, which pins the parent with its own reference. The
disable paths never call kset_unregister(), so the final kobject_put() in
bpf_scx_unreg() leaves a stale reference and scx_kobj_release() never runs,
leaking the whole struct scx_sched on every load/unload cycle.
Unregister sub_kset in scx_root_disable() and scx_sub_disable() before
kobject_del(&sch->kobj).
Fixes: ebeca1f930ea ("sched_ext: Introduce cgroup sub-sched support")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_hardlockup() runs from NMI and eventually calls scx_claim_exit(),
which takes scx_sched_lock. scx_sched_lock isn't NMI-safe and grabbing
it from NMI context can lead to deadlocks.
The hardlockup handler is best-effort recovery and the disable path it
triggers runs off of irq_work anyway. Move the handle_lockup() call into
an irq_work so it runs in IRQ context.
Fixes: ebeca1f930ea ("sched_ext: Introduce cgroup sub-sched support")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
When unregistered my self-written scx scheduler, the following panic
occurs.
[ 229.923133] Kernel text patching generated an invalid instruction at 0xffff80009bc2c1f8!
[ 229.923146] Internal error: Oops - BRK: 00000000f2000100 [#1] SMP
[ 230.077871] CPU: 48 UID: 0 PID: 1760 Comm: kworker/u583:7 Not tainted 7.0.0+ #3 PREEMPT(full)
[ 230.086677] Hardware name: NVIDIA GB200 NVL/P3809-BMC, BIOS 02.05.12 20251107
[ 230.093972] Workqueue: events_unbound bpf_map_free_deferred
[ 230.099675] Sched_ext: invariant_0.1.0_aarch64_unknown_linux_gnu_debug (disabling), task: runnable_at=-174ms
[ 230.116843] pc : 0xffff80009bc2c1f8
[ 230.120406] lr : dequeue_task_scx+0x270/0x2d0
[ 230.217749] Call trace:
[ 230.228515] 0xffff80009bc2c1f8 (P)
[ 230.232077] dequeue_task+0x84/0x188
[ 230.235728] sched_change_begin+0x1dc/0x250
[ 230.240000] __set_cpus_allowed_ptr_locked+0x17c/0x240
[ 230.245250] __set_cpus_allowed_ptr+0x74/0xf0
[ 230.249701] ___migrate_enable+0x4c/0xa0
[ 230.253707] bpf_map_free_deferred+0x1a4/0x1b0
[ 230.258246] process_one_work+0x184/0x540
[ 230.262342] worker_thread+0x19c/0x348
[ 230.266170] kthread+0x13c/0x150
[ 230.269465] ret_from_fork+0x10/0x20
[ 230.281393] Code: d4202000 d4202000 d4202000 d4202000 (d4202000)
[ 230.287621] ---[ end trace 0000000000000000 ]---
[ 231.160046] Kernel panic - not syncing: Oops - BRK: Fatal exception in interrupt
The root cause is that the JIT page backing ops->quiescent() is freed
before all callers of that function have stopped.
The expected ordering during teardown is:
bitmap_zero(sch->has_op) + synchronize_rcu()
-> guarantees no CPU will ever call sch->ops.* again
-> only THEN free the BPF struct_ops JIT page
bpf_scx_unreg() is supposed to enforce the order, but after
commit f4a6c506d118 ("sched_ext: Always bounce scx_disable() through
irq_work"), disable_work is no longer queued directly, causing
kthread_flush_work() to be a noop. Thus, the caller drops the struct_ops
map too early and poisoned with AARCH64_BREAK_FAULT before
disable_workfn ever execute.
So the subsequent dequeue_task() still sees SCX_HAS_OP(sch, quiescent)
as true and calls ops.quiescent, which hit on the poisoned page and BRK
panic.
Add a helper scx_flush_disable_work() so the future use cases that want
to flush disable_work can use it.
Also amend the call for scx_root_enable_workfn() and
scx_sub_enable_workfn() which have similar pattern in the error path.
Fixes: f4a6c506d118 ("sched_ext: Always bounce scx_disable() through irq_work")
Signed-off-by: Richard Cheng <icheng@nvidia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
local_dsq_post_enq() calls call_task_dequeue() with scx_root instead of
the scheduler instance actually managing the task. When
CONFIG_EXT_SUB_SCHED is enabled, tasks may be managed by a sub-scheduler
whose ops.dequeue() callback differs from root's. Using scx_root causes
the wrong scheduler's ops.dequeue() to be consulted: sub-sched tasks
dispatched to a local DSQ via scx_bpf_dsq_move_to_local() will have
SCX_TASK_IN_CUSTODY cleared but the sub-scheduler's ops.dequeue() is
never invoked, violating the custody exit semantics.
Fix by adding a 'struct scx_sched *sch' parameter to local_dsq_post_enq()
and move_local_task_to_local_dsq(), and propagating the correct scheduler
from their callers dispatch_enqueue(), move_task_between_dsqs(), and
consume_dispatch_q().
This is consistent with dispatch_enqueue()'s non-local path which already
passes 'sch' directly to call_task_dequeue() for global/bypass DSQs.
Fixes: ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics")
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull to receive:
2d2b026c3ea7 ("sched_ext: Deny SCX kfuncs to non-SCX struct_ops programs")
which modifies scx_kfunc_context_filter() to avoid conflicts with planned
changes in for-7.2.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
scx_kfunc_context_filter() currently allows non-SCX struct_ops programs
(e.g. tcp_congestion_ops) to call SCX unlocked kfuncs. This is wrong
for two reasons:
- It is semantically incorrect: a TCP congestion control program has no
business calling SCX kfuncs such as scx_bpf_kick_cpu().
- With CONFIG_EXT_SUB_SCHED=y, kfuncs like scx_bpf_kick_cpu() call
scx_prog_sched(aux), which invokes bpf_prog_get_assoc_struct_ops(aux)
and casts the result to struct sched_ext_ops * before reading ops->priv.
For a non-SCX struct_ops program the returned pointer is the kdata of
that struct_ops type, which is far smaller than sched_ext_ops, making
the read an out-of-bounds access (confirmed with KASAN).
Extend the filter to cover scx_kfunc_set_any and scx_kfunc_set_idle as
well, and deny all SCX kfuncs for any struct_ops program that is not the
SCX struct_ops. This addresses both issues: the semantic contract is
enforced at the verifier level, and the runtime out-of-bounds access
becomes unreachable.
Fixes: d1d3c1c6ae36 ("sched_ext: Add verifier-time kfunc context filter")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
