| Age | Commit message (Collapse) | Author |
|---|
|
Introduce struct bpf_map_desc to hold bpf_map pointer and map uid. Use
this struct in both bpf_call_arg_meta and bpf_kfunc_call_arg_meta
instead of having different representations:
- bpf_call_arg_meta had separate map_ptr and map_uid fields
- bpf_kfunc_call_arg_meta had an anonymous inline struct
This unifies the map fields layout across both metadata structures,
making the code more consistent and preparing for further refactoring of
map field pointer validation.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260130-verif_special_fields-v2-1-2c59e637da7d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allowing sleepable programs to use tail calls.
Making sure we can't mix sleepable and non-sleepable bpf programs
in tail call map (BPF_MAP_TYPE_PROG_ARRAY) and allowing it to be
used in sleepable programs.
Sleepable programs can be preempted and sleep which might bring
new source of race conditions, but both direct and indirect tail
calls should not be affected.
Direct tail calls work by patching direct jump to callee into bpf
caller program, so no problem there. We atomically switch from nop
to jump instruction.
Indirect tail call reads the callee from the map and then jumps to
it. The callee bpf program can't disappear (be released) from the
caller, because it is executed under rcu lock (rcu_read_lock_trace).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260130081208.1130204-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The BPF verifier assumes `insn_aux->nospec_result` is only set for
direct memory writes (e.g., `*(u32*)(r1+off) = r2`). However, the
assertion fails to account for helper calls (e.g.,
`bpf_skb_load_bytes_relative`) that perform writes to stack memory. Make
the check more precise to resolve this.
The problem is that `BPF_CALL` instructions have `BPF_CLASS(insn->code)
== BPF_JMP`, which triggers the warning check:
- Helpers like `bpf_skb_load_bytes_relative` write to stack memory
- `check_helper_call()` loops through `meta.access_size`, calling
`check_mem_access(..., BPF_WRITE)`
- `check_stack_write()` sets `insn_aux->nospec_result = 1`
- Since `BPF_CALL` is encoded as `BPF_JMP | BPF_CALL`, the warning fires
Execution flow:
```
1. Drop capabilities → Enable Spectre mitigation
2. Load BPF program
└─> do_check()
├─> check_cond_jmp_op() → Marks dead branch as speculative
│ └─> push_stack(..., speculative=true)
├─> pop_stack() → state->speculative = 1
├─> check_helper_call() → Processes helper in dead branch
│ └─> check_mem_access(..., BPF_WRITE)
│ └─> insn_aux->nospec_result = 1
└─> Checks: state->speculative && insn_aux->nospec_result
└─> BPF_CLASS(insn->code) == BPF_JMP → WARNING
```
To fix the assert, it would be nice to be able to reuse
bpf_insn_successors() here, but bpf_insn_successors()->cnt is not
exactly what we want as it may also be 1 for BPF_JA. Instead, we could
check opcode_info.can_jump, but then we would have to share the table
between the functions. This would mean moving the table out of the
function and adding bpf_opcode_info(). As the verifier_bug_if() only
runs for insns with nospec_result set, the impact on verification time
would likely still be negligible. However, I assume sharing
bpf_opcode_info() between liveness.c and verifier.c will not be worth
it. It seems as only adjust_jmp_off() could also be simplified using it,
and there imm/off is touched. Thus it is maybe better to rely on exact
opcode/class matching there.
Therefore, to avoid this sharing only for a verifier_bug_if(), just
check the opcode. This should now cover all opcodes for which can_jump
in bpf_insn_successors() is true.
Parts of the description and example are taken from the bug report.
Fixes: dadb59104c64 ("bpf: Fix aux usage after do_check_insn()")
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/7678017d-b760-4053-a2d8-a6879b0dbeeb@hust.edu.cn/
Link: https://lore.kernel.org/r/20260127115912.3026761-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Using single ftrace_ops for direct calls update instead of allocating
ftrace_ops object for each trampoline.
With single ftrace_ops object we can use update_ftrace_direct_* api
that allows multiple ip sites updates on single ftrace_ops object.
Adding HAVE_SINGLE_FTRACE_DIRECT_OPS config option to be enabled on
each arch that supports this.
At the moment we can enable this only on x86 arch, because arm relies
on ftrace_ops object representing just single trampoline image (stored
in ftrace_ops::direct_call). Archs that do not support this will continue
to use *_ftrace_direct api.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-10-jolsa@kernel.org
|
|
We are going to remove "ftrace_ops->private == bpf_trampoline" setup
in following changes.
Adding ip argument to ftrace_ops_func_t callback function, so we can
use it to look up the trampoline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-9-jolsa@kernel.org
|
|
Following changes need to lookup trampoline based on its ip address,
adding hash table for that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-8-jolsa@kernel.org
|
|
At the moment the we allow the jmp attach only for ftrace_ops that
has FTRACE_OPS_FL_JMP set. This conflicts with following changes
where we use single ftrace_ops object for all direct call sites,
so all could be be attached via just call or jmp.
We already limit the jmp attach support with config option and bit
(LSB) set on the trampoline address. It turns out that's actually
enough to limit the jmp attach for architecture and only for chosen
addresses (with LSB bit set).
Each user of register_ftrace_direct or modify_ftrace_direct can set
the trampoline bit (LSB) to indicate it has to be attached by jmp.
The bpf trampoline generation code uses trampoline flags to generate
jmp-attach specific code and ftrace inner code uses the trampoline
bit (LSB) to handle return from jmp attachment, so there's no harm
to remove the FTRACE_OPS_FL_JMP bit.
The fexit/fmodret performance stays the same (did not drop),
current code:
fentry : 77.904 ± 0.546M/s
fexit : 62.430 ± 0.554M/s
fmodret : 66.503 ± 0.902M/s
with this change:
fentry : 80.472 ± 0.061M/s
fexit : 63.995 ± 0.127M/s
fmodret : 67.362 ± 0.175M/s
Fixes: 25e4e3565d45 ("ftrace: Introduce FTRACE_OPS_FL_JMP")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-2-jolsa@kernel.org
|
|
This commit fixes a security issue where BPF_PROG_DETACH on tcx or
netkit devices could be executed by any user when no program fd was
provided, bypassing permission checks. The fix adds a capability
check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case.
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Signed-off-by: Guillaume Gonnet <ggonnet.linux@gmail.com>
Link: https://lore.kernel.org/r/20260127160200.10395-1-ggonnet.linux@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, the BPF cgroup iterator supports walking descendants in
either pre-order (BPF_CGROUP_ITER_DESCENDANTS_PRE) or post-order
(BPF_CGROUP_ITER_DESCENDANTS_POST). These modes perform an exhaustive
depth-first search (DFS) of the hierarchy. In scenarios where a BPF
program may need to inspect only the direct children of a given parent
cgroup, a full DFS is unnecessarily expensive.
This patch introduces a new BPF cgroup iterator control option,
BPF_CGROUP_ITER_CHILDREN. This control option restricts the traversal
to the immediate children of a specified parent cgroup, allowing for
more targeted and efficient iteration, particularly when exhaustive
depth-first search (DFS) traversal is not required.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20260127085112.3608687-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Patch series "Align atomic storage", v7.
This series adds the __aligned attribute to atomic_t and atomic64_t
definitions in include/linux and include/asm-generic (respectively) to get
natural alignment of both types on csky, m68k, microblaze, nios2, openrisc
and sh.
This series also adds Kconfig options to enable a new run-time warning to
help reveal misaligned atomic accesses on platforms which don't trap that.
The performance impact is expected to vary across platforms and workloads.
The measurements I made on m68k show that some workloads run faster and
others slower.
This patch (of 4):
Align bpf_res_spin_lock to avoid a BUILD_BUG_ON() when the alignment
changes, as it will do on m68k when, in a subsequent patch, the minimum
alignment of the atomic_t member of struct rqspinlock gets increased from
2 to 4. Drop the BUILD_BUG_ON() as it becomes redundant.
Link: https://lkml.kernel.org/r/cover.1768281748.git.fthain@linux-m68k.org
Link: https://lkml.kernel.org/r/8a83876b07d1feacc024521e44059ae89abbb1ea.1768281748.git.fthain@linux-m68k.org
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Guo Ren <guoren@kernel.org>
Cc: Hao Luo <haoluo@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Sasha Levin (Microsoft) <sashal@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement session cookie for fsession. The session cookies will be stored
in the stack, and the layout of the stack will look like this:
return value -> 8 bytes
argN -> 8 bytes
...
arg1 -> 8 bytes
nr_args -> 8 bytes
ip (optional) -> 8 bytes
cookie2 -> 8 bytes
cookie1 -> 8 bytes
The offset of the cookie for the current bpf program, which is in 8-byte
units, is stored in the
"(((u64 *)ctx)[-1] >> BPF_TRAMP_COOKIE_INDEX_SHIFT) & 0xFF". Therefore, we
can get the session cookie with ((u64 *)ctx)[-offset].
Implement and inline the bpf_session_cookie() for the fsession in the
verifier.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If fsession exists, we will use the bit (1 << BPF_TRAMP_IS_RETURN_SHIFT)
in ((u64 *)ctx)[-1] to store the "is_return" flag.
The logic of bpf_session_is_return() for fsession is implemented in the
verifier by inline following code:
bool bpf_session_is_return(void *ctx)
{
return (((u64 *)ctx)[-1] >> BPF_TRAMP_IS_RETURN_SHIFT) & 1;
}
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-5-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the function argument of "void *ctx" to bpf_session_cookie() and
bpf_session_is_return(), which is a preparation of the next patch.
The two kfunc is seldom used now, so it will not introduce much effect
to change their function prototype.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20260124062008.8657-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For now, ((u64 *)ctx)[-1] is used to store the nr_args in the trampoline.
However, 1 byte is enough to store such information. Therefore, we use
only the least significant byte of ((u64 *)ctx)[-1] to store the nr_args,
and reserve the rest for other usages.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-3-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The fsession is something that similar to kprobe session. It allow to
attach a single BPF program to both the entry and the exit of the target
functions.
Introduce the struct bpf_fsession_link, which allows to add the link to
both the fentry and fexit progs_hlist of the trampoline.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The TAS fallback can be invoked directly when queued spin locks are
disabled, and through the slow path when paravirt is enabled for queued
spin locks. In the latter case, the res_spin_lock macro will attempt the
fast path and already hold the entry when entering the slow path. This
will lead to creation of extraneous entries that are not released, which
may cause false positives for deadlock detection.
Fix this by always preceding invocation of the TAS fallback in every
case with the grabbing of the held lock entry, and add a comment to make
note of this.
Fixes: c9102a68c070 ("rqspinlock: Add a test-and-set fallback")
Reported-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tested-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260122115911.3668985-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_strncasecmp() function performs same like bpf_strcasecmp() except
limiting the comparison to a specific length.
Signed-off-by: Yuzuki Ishiyama <ishiyama@hpc.is.uec.ac.jp>
Acked-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/r/20260121033328.1850010-2-ishiyama@hpc.is.uec.ac.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For now, bpf_get_func_arg() and bpf_get_func_arg_cnt() is not supported by
the BPF_TRACE_RAW_TP, which is not convenient to get the argument of the
tracepoint, especially for the case that the position of the arguments in
a tracepoint can change.
The target tracepoint BTF type id is specified during loading time,
therefore we can get the function argument count from the function
prototype instead of the stack.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20260121044348.113201-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Inline bpf_get_current_task() and bpf_get_current_task_btf() for x86_64
to obtain better performance.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260120070555.233486-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_address_lookup() has been used only in kallsyms_lookup_buildid(). It
was supposed to set @modname and @modbuildid when the symbol was in a
module.
But it always just cleared @modname because BPF symbols were never in a
module. And it did not clear @modbuildid because the pointer was not
passed.
The wrapper is no longer needed. Both @modname and @modbuildid are now
always initialized to NULL in kallsyms_lookup_buildid().
Remove the wrapper and rename __bpf_address_lookup() to
bpf_address_lookup() because this variant is used everywhere.
[akpm@linux-foundation.org: fix loongarch]
Link: https://lkml.kernel.org/r/20251128135920.217303-6-pmladek@suse.com
Fixes: 9294523e3768 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove lock from the bpf_timer_cancel() helper. The lock does not
protect from concurrent modification of the bpf_async_cb data fields as
those are modified in the callback without locking.
Use guard(rcu)() instead of pair of explicit lock()/unlock().
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260120-timer_nolock-v6-4-670ffdd787b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce bpf_async_update_prog_callback(): lock-free update of cb->prog
and cb->callback_fn. This function allows updating prog and callback_fn
fields of the struct bpf_async_cb without holding lock.
For now use it under the lock from __bpf_async_set_callback(), in the
next patches that lock will be removed.
Lock-free algorithm:
* Acquire a guard reference on prog to prevent it from being freed
during the retry loop.
* Retry loop:
1. Each iteration acquires a new prog reference and stores it
in cb->prog via xchg. The previous prog is released.
2. The loop condition checks if both cb->prog and cb->callback_fn
match what we just wrote. If either differs, a concurrent writer
overwrote our value, and we must retry.
3. When we retry, our previously-stored prog was already released by
the concurrent writer or will be released by us after
overwriting.
* Release guard reference.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260120-timer_nolock-v6-3-670ffdd787b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove unused arguments from __bpf_async_set_callback().
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260120-timer_nolock-v6-2-670ffdd787b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move the timer deletion logic into a dedicated bpf_timer_delete()
helper so it can be reused by later patches.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260120-timer_nolock-v6-1-670ffdd787b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add check to ensure that ARG_PTR_TO_MEM is used with either MEM_WRITE or
MEM_RDONLY.
Using ARG_PTR_TO_MEM alone without flags does not make sense because:
- If the helper does not change the argument, missing MEM_RDONLY causes the
verifier to incorrectly reject a read-only buffer.
- If the helper does change the argument, missing MEM_WRITE causes the
verifier to incorrectly assume the memory is unchanged, leading to errors
in code optimization.
Co-developed-by: Shuran Liu <electronlsr@gmail.com>
Signed-off-by: Shuran Liu <electronlsr@gmail.com>
Co-developed-by: Peili Gao <gplhust955@gmail.com>
Signed-off-by: Peili Gao <gplhust955@gmail.com>
Co-developed-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Zesen Liu <ftyghome@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260120-helper_proto-v3-2-27b0180b4e77@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"),
the verifier started relying on the access type flags in helper
function prototypes to perform memory access optimizations.
Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the
corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the
verifier to incorrectly assume that the buffer contents are unchanged
across the helper call. Consequently, the verifier may optimize away
subsequent reads based on this wrong assumption, leading to correctness
issues.
For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect
since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM
which correctly indicates write access to potentially uninitialized memory.
Similar issues were recently addressed for specific helpers in commit
ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer")
and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args").
Fix these prototypes by adding the correct memory access flags.
Fixes: 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking")
Co-developed-by: Shuran Liu <electronlsr@gmail.com>
Signed-off-by: Shuran Liu <electronlsr@gmail.com>
Co-developed-by: Peili Gao <gplhust955@gmail.com>
Signed-off-by: Peili Gao <gplhust955@gmail.com>
Co-developed-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Zesen Liu <ftyghome@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260120-helper_proto-v3-1-27b0180b4e77@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch implements range tracking (interval analysis) for BPF_DIV and
BPF_MOD operations when the divisor is a constant, covering both signed
and unsigned variants.
While LLVM typically optimizes integer division and modulo by constants
into multiplication and shift sequences, this optimization is less
effective for the BPF target when dealing with 64-bit arithmetic.
Currently, the verifier does not track bounds for scalar division or
modulo, treating the result as "unbounded". This leads to false positive
rejections for safe code patterns.
For example, the following code (compiled with -O2):
```c
int test(struct pt_regs *ctx) {
char buffer[6] = {1};
__u64 x = bpf_ktime_get_ns();
__u64 res = x % sizeof(buffer);
char value = buffer[res];
bpf_printk("res = %llu, val = %d", res, value);
return 0;
}
```
Generates a raw `BPF_MOD64` instruction:
```asm
; __u64 res = x % sizeof(buffer);
1: 97 00 00 00 06 00 00 00 r0 %= 0x6
; char value = buffer[res];
2: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0x0 ll
4: 0f 01 00 00 00 00 00 00 r1 += r0
5: 91 14 00 00 00 00 00 00 r4 = *(s8 *)(r1 + 0x0)
```
Without this patch, the verifier fails with "math between map_value
pointer and register with unbounded min value is not allowed" because
it cannot deduce that `r0` is within [0, 5].
According to the BPF instruction set[1], the instruction's offset field
(`insn->off`) is used to distinguish between signed (`off == 1`) and
unsigned division (`off == 0`). Moreover, we also follow the BPF division
and modulo runtime behavior (semantics) to handle special cases, such as
division by zero and signed division overflow.
- UDIV: dst = (src != 0) ? (dst / src) : 0
- SDIV: dst = (src == 0) ? 0 : ((src == -1 && dst == LLONG_MIN) ? LLONG_MIN : (dst / src))
- UMOD: dst = (src != 0) ? (dst % src) : dst
- SMOD: dst = (src == 0) ? dst : ((src == -1 && dst == LLONG_MIN) ? 0: (dst s% src))
Here is the overview of the changes made in this patch (See the code comments
for more details and examples):
1. For BPF_DIV: Firstly check whether the divisor is zero. If so, set the
destination register to zero (matching runtime behavior).
For non-zero constant divisors: goto `scalar(32)?_min_max_(u|s)div` functions.
- General cases: compute the new range by dividing max_dividend and
min_dividend by the constant divisor.
- Overflow case (SIGNED_MIN / -1) in signed division: mark the result
as unbounded if the dividend is not a single number.
2. For BPF_MOD: Firstly check whether the divisor is zero. If so, leave the
destination register unchanged (matching runtime behavior).
For non-zero constant divisors: goto `scalar(32)?_min_max_(u|s)mod` functions.
- General case: For signed modulo, the result's sign matches the
dividend's sign. And the result's absolute value is strictly bounded
by `min(abs(dividend), abs(divisor) - 1)`.
- Special care is taken when the divisor is SIGNED_MIN. By casting
to unsigned before negation and subtracting 1, we avoid signed
overflow and correctly calculate the maximum possible magnitude
(`res_max_abs` in the code).
- "Small dividend" case: If the dividend is already within the possible
result range (e.g., [-2, 5] % 10), the operation is an identity
function, and the destination register remains unchanged.
3. In `scalar(32)?_min_max_(u|s)(div|mod)` functions: After updating current
range, reset other ranges and tnum to unbounded/unknown.
e.g., in `scalar_min_max_sdiv`, signed 64-bit range is updated. Then reset
unsigned 64-bit range and 32-bit range to unbounded, and tnum to unknown.
Exception: in BPF_MOD's "small dividend" case, since the result remains
unchanged, we do not reset other ranges/tnum.
4. Also updated existing selftests based on the expected BPF_DIV and
BPF_MOD behavior.
[1] https://www.kernel.org/doc/Documentation/bpf/standardization/instruction-set.rst
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20260119085458.182221-2-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that all the __prog suffix users in the kernel tree migrated to
KF_IMPLICIT_ARGS, remove it from the verifier.
See prior discussion for context [1].
[1] https://lore.kernel.org/bpf/CAEf4BzbgPfRm9BX=TsZm-TsHFAHcwhPY4vTt=9OT-uhWqf8tqw@mail.gmail.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-13-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement bpf_stream_vprintk with an implicit bpf_prog_aux argument,
and remote bpf_stream_vprintk_impl from the kernel.
Update the selftests to use the new API with implicit argument.
bpf_stream_vprintk macro is changed to use the new bpf_stream_vprintk
kfunc, and the extern definition of bpf_stream_vprintk_impl is
replaced accordingly.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-11-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement bpf_task_work_schedule_* with an implicit bpf_prog_aux
argument, and remove corresponding _impl funcs from the kernel.
Update special kfunc checks in the verifier accordingly.
Update the selftests to use the new API with implicit argument.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-10-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement bpf_wq_set_callback() with an implicit bpf_prog_aux
argument, and remove bpf_wq_set_callback_impl().
Update special kfunc checks in the verifier accordingly.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-8-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A kernel function bpf_foo marked with KF_IMPLICIT_ARGS flag is
expected to have two associated types in BTF:
* `bpf_foo` with a function prototype that omits implicit arguments
* `bpf_foo_impl` with a function prototype that matches the kernel
declaration of `bpf_foo`, but doesn't have a ksym associated with
its name
In order to support kfuncs with implicit arguments, the verifier has
to know how to resolve a call of `bpf_foo` to the correct BTF function
prototype and address.
To implement this, in add_kfunc_call() kfunc flags are checked for
KF_IMPLICIT_ARGS. For such kfuncs a BTF func prototype is adjusted to
the one found for `bpf_foo_impl` (func_name + "_impl" suffix, by
convention) function in BTF.
This effectively changes the signature of the `bpf_foo` kfunc in the
context of verification: from one without implicit args to the one
with full argument list.
The values of implicit arguments by design are provided by the
verifier, and so they can only be of particular types. In this patch
the only allowed implicit arg type is a pointer to struct
bpf_prog_aux.
In order for the verifier to correctly set an implicit bpf_prog_aux
arg value at runtime, is_kfunc_arg_prog() is extended to check for the
arg type. At a point when prog arg is determined in check_kfunc_args()
the kfunc with implicit args already has a prototype with full
argument list, so the existing value patch mechanism just works.
If a new kfunc with KF_IMPLICIT_ARG is declared for an existing kfunc
that uses a __prog argument (a legacy case), the prototype
substitution works in exactly the same way, assuming the kfunc follows
the _impl naming convention. The difference is only in how _impl
prototype is added to the BTF, which is not the verifier's
concern. See a subsequent resolve_btfids patch for details.
__prog suffix is still supported at this point, but will be removed in
a subsequent patch, after current users are moved to KF_IMPLICIT_ARGS.
Introduction of KF_IMPLICIT_ARGS revealed an issue with zero-extension
tracking, because an explicit rX = 0 in place of the verifier-supplied
argument is now absent if the arg is implicit (the BPF prog doesn't
pass a dummy NULL anymore). To mitigate this, reset the subreg_def of
all caller saved registers in check_kfunc_call() [1].
[1] https://lore.kernel.org/bpf/b4a760ef828d40dac7ea6074d39452bb0dc82caa.camel@gmail.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-4-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is code duplication between add_kfunc_call() and
fetch_kfunc_meta() collecting information about a kfunc from BTF.
Introduce struct bpf_kfunc_meta to hold common kfunc BTF data and
implement fetch_kfunc_meta() to fill it in, instead of struct
bpf_kfunc_call_arg_meta directly.
Then use these in add_kfunc_call() and (new) fetch_kfunc_arg_meta()
functions, and fixup previous usages of fetch_kfunc_meta() to
fetch_kfunc_arg_meta().
Besides the code dedup, this change enables add_kfunc_call() to access
kfunc->flags.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-3-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
btf_kfunc_id_set_contains() is called by fetch_kfunc_meta() in the BPF
verifier to get the kfunc flags stored in the .BTF_ids ELF section.
If it returns NULL instead of a valid pointer, it's interpreted as an
illegal kfunc usage failing the verification.
There are two potential reasons for btf_kfunc_id_set_contains() to
return NULL:
1. Provided kfunc BTF id is not present in relevant kfunc id sets.
2. The kfunc is not allowed, as determined by the program type
specific filter [1].
The filter functions accept a pointer to `struct bpf_prog`, so they
might implicitly depend on earlier stages of verification, when
bpf_prog members are set.
For example, bpf_qdisc_kfunc_filter() in linux/net/sched/bpf_qdisc.c
inspects prog->aux->st_ops [2], which is initialized in:
check_attach_btf_id() -> check_struct_ops_btf_id()
So far this hasn't been an issue, because fetch_kfunc_meta() is the
only caller of btf_kfunc_id_set_contains().
However in subsequent patches of this series it is necessary to
inspect kfunc flags earlier in BPF verifier, in the add_kfunc_call().
To resolve this, refactor btf_kfunc_id_set_contains() into two
interface functions:
* btf_kfunc_flags() that simply returns pointer to kfunc_flags
without applying the filters
* btf_kfunc_is_allowed() that both checks for kfunc_flags existence
(which is a requirement for a kfunc to be allowed) and applies the
prog filters
See [3] for the previous version of this patch.
[1] https://lore.kernel.org/all/20230519225157.760788-7-aditi.ghag@isovalent.com/
[2] https://lore.kernel.org/all/20250409214606.2000194-4-ameryhung@gmail.com/
[3] https://lore.kernel.org/bpf/20251029190113.3323406-3-ihor.solodrai@linux.dev/
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, reset_idmap_scratch() performs a 4.7KB memset() in every
states_equal() call. Optimize this by using a counter to track used
ID mappings, replacing the O(N) memset() with an O(1) reset and
bounding the search loop in check_ids().
Signed-off-by: Qiliang Yuan <realwujing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260120023234.77673-1-realwujing@gmail.com
|
|
After commit 4fa8d68aa53e ("bpf: Convert hashtab.c to rqspinlock")
we no longer use HASHTAB_MAP_LOCK_{COUNT,MASK} as the per-CPU
map_locked[HASHTAB_MAP_LOCK_COUNT] array got removed from struct
bpf_htab. Right now it is still accounted for in htab_map_mem_usage.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/09703eb6bb249f12b1d5253b5a50a0c4fa239d27.1768913513.git.daniel@iogearbox.net
|
|
sync_linked_regs() is called after a conditional jump to propagate new
bounds of a register to all its liked registers. But the verifier log
only prints the state of the register that is part of the conditional
jump.
Make sync_linked_regs() scratch the registers whose bounds have been
updated by propagation from a known register.
Before:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (35) if r0 >= 0x6 goto pc+1
After:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+2 ; R0=scalar(id=1+0,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (35) if r0 >= 0x6 goto pc+1
The conditional jump in 4 updates the bound of R1 and the new bounds are
propogated to R0 as it is linked with the same id, before this change,
verifier only printed the state for R1 but after it prints for both R0
and R1.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20260116141436.3715322-1-puranjay@kernel.org
|
|
Add GPL-2.0 SPDX-License-Identifier lines to some files,
and remove a reference to COPYING, and boilerplate warranty
text, from offload.c.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260115013129.598705-1-tim.bird@sony.com
|
|
sync_linked_regs() copies the id of known_reg to reg when propagating
bounds of known_reg to reg using the off of known_reg, but when
known_reg was linked to reg like:
known_reg = reg ; both known_reg and reg get same id
known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST
now when a call to sync_linked_regs() happens, let's say with the following:
if known_reg >= 10 goto pc+2
known_reg's new bounds are propagated to reg but now reg gets
BPF_ADD_CONST from the copy.
This means if another link to reg is created like:
another_reg = reg ; another_reg should get the id of reg but
assign_scalar_id_before_mov() sees
BPF_ADD_CONST on reg and assigns a new id to it.
As reg has a new id now, known_reg's link to reg is broken. If we find
new bounds for known_reg, they will not be propagated to reg.
This can be seen in the selftest added in the next commit:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255)
6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf))
8: (37) r0 /= 0
div by zero
When 4 is verified, r1's bounds are propagated to r0 but r0 also gets
BPF_ADD_CONST (bug).
When 5 is verified, r0 gets a new id (2) and its link with r1 is broken.
After 6 we know r1 has bounds [14, 259] and therefore r0 should have
bounds [10, 255], therefore the branch at 7 is always taken. But because
r0's id was changed to 2, r1's new bounds are not propagated to r0.
The verifier still thinks r0 has bounds [6, 255] before 7 and execution
can reach div by zero.
Fix this by preserving id in sync_linked_regs() like off and subreg_def.
Fixes: 98d7ca374ba4 ("bpf: Track delta between "linked" registers.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260115151143.1344724-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For a `gotox rX` instruction the rX register should be marked as used
in the compute_insn_live_regs() function. Fix this.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260114162544.83253-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The insn_array_map_direct_value_addr() function currently returns
-EINVAL when the offset within the map is invalid. Change this to
return -EACCES, so that it is consistent with similar boundary access
checks in the verifier.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260111153047.8388-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The map_direct_value_addr() function of the instruction
array map incorrectly adds offset to the resulting address.
This is a bug, because later the resolve_pseudo_ldimm64()
function adds the offset. Fix it. Corresponding selftests
are added in a consequent commit.
Fixes: 493d9e0d6083 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260111153047.8388-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Teach the BPF verifier to treat pointers to struct types returned from
BPF kfuncs as implicitly trusted (PTR_TO_BTF_ID | PTR_TRUSTED) by
default. Returning untrusted pointers to struct types from BPF kfuncs
should be considered an exception only, and certainly not the norm.
Update existing selftests to reflect the change in register type
printing (e.g. `ptr_` becoming `trusted_ptr_` in verifier error
messages).
Link: https://lore.kernel.org/bpf/aV4nbCaMfIoM0awM@google.com/
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260113083949.2502978-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, vmlinux BTF is unconditionally sorted during
the build phase. The function btf_find_by_name_kind
executes the binary search branch, so find_bpffs_btf_enums
can be optimized by using btf_find_by_name_kind.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-10-dolinux.peng@gmail.com
|
|
Currently, vmlinux and kernel module BTFs are unconditionally
sorted during the build phase, with named types placed at the
end. Thus, anonymous types should be skipped when starting the
search. In my vmlinux BTF, the number of anonymous types is
61,747, which means the loop count can be reduced by 61,747.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-9-dolinux.peng@gmail.com
|
|
This patch checks whether the BTF is sorted by name in ascending order.
If sorted, binary search will be used when looking up types.
Specifically, vmlinux and kernel module BTFs are always sorted during
the build phase with anonymous types placed before named types, so we
only need to identify the starting ID of named types.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-8-dolinux.peng@gmail.com
|
|
Improve btf_find_by_name_kind() performance by adding binary search
support for sorted types. Falls back to linear search for compatibility.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-7-dolinux.peng@gmail.com
|
|
The func_id parameter is not needed in check_func_proto.
This patch removes it.
Signed-off-by: Song Chen <chensong_2000@189.cn>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260105155009.4581-1-chensong_2000@189.cn
|
