| Age | Commit message (Collapse) | Author |
|---|
|
Currently, tailcall count is incremented in the interpreter even when
tailcall fails due to non-existent prog. Fix this by holding off on
the tailcall count increment until after NULL check on the prog.
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Link: https://lore.kernel.org/r/20260220062959.195101-1-hbathini@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For the following scenario:
struct tree_node {
struct bpf_refcount ref;
struct bpf_rb_node node;
struct node_data __kptr * node_data;
u64 key;
};
This means node_data would have the type PTR_TO_BTF_ID | MEM_ALLOC |
NON_OWN_REF | MEM_RCU.
When traversing an rbtree using bpf_rbtree_left/right, if we need to
use bpf_kptr_xchg to read the __kptr pointer, we still need to follow
the remove-read-add sequence.
This patch allows us to use bpf_kptr_xchg to directly read the __kptr
pointer without any prior operations.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Link: https://lore.kernel.org/r/20260214124042.62229-5-pilgrimtao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When traversing an rbtree using bpf_rbtree_left/right, if bpf_kptr_xchg
is used to access the __kptr pointer contained in a node, it currently
requires first removing the node with bpf_rbtree_remove and clearing the
NON_OWN_REF flag, then re-adding the node to the original rbtree with
bpf_rbtree_add after usage. This process significantly degrades rbtree
traversal performance. The patch enables accessing __kptr pointers with
the NON_OWN_REF flag set while holding the lock, eliminating the need
for this remove-read-add sequence.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Link: https://lore.kernel.org/r/20260214124042.62229-3-pilgrimtao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For the following scenario:
struct tree_node {
struct bpf_rb_node node;
struct request __kptr *req;
u64 key;
};
struct bpf_rb_root tree_root __contains(tree_node, node);
struct bpf_spin_lock tree_lock;
If we need to traverse all nodes in the rbtree, retrieve the __kptr
pointer from each node, and read kernel data from the referenced
object, using bpf_kptr_xchg appears unavoidable.
This patch skips the BPF verifier checks for bpf_kptr_xchg when
called while holding a lock.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Link: https://lore.kernel.org/r/20260214124042.62229-2-pilgrimtao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge trees after 7.0-rc1.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This field is now used only for linked scalar registers tracking.
Rename it to 'delta' to better describe it's purpose:
constant delta between "linked" scalars with the same ID.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260212-ptrs-off-migration-v2-4-00820e4d3438@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit consolidates static and varying pointer offset tracking
logic. All offsets are now represented solely using `.var_off` and
min/max fields. The reasons are twofold:
- This simplifies pointer tracking code, as each relevant function
needs to check the `.var_off` field anyway.
- It makes it easier to widen pointer registers for the purpose of loop
convergence checks, by forgoing the `regsafe()` logic demanding
`.off` fields to be identical.
The changes are spread across many functions and are hard to group
into smaller patches. Some of the logical changes include:
- Checks in __check_ptr_off_reg() are reordered so that the
tnum_is_const() check is done before operating on reg->var_off.value.
- check_packet_access() now uses check_mem_region_access() to handle
possible 'off' overflow cases.
- In check_helper_mem_access() utility functions like
check_packet_access() are now called with 'off=0', as these utility
functions now account for the complete register offset range.
- In check_reg_type() a call to __check_ptr_off_reg() is added before
a call to btf_struct_ids_match(). This prevents
btf_struct_ids_match() from potentially working on non-constant
reg->var_off.value.
- regsafe() is relaxed to avoid comparing '.off' field for pointers.
As a precaution, the changes are verified in [1] by adding a pass
checking that no pointer has non-zero '.off' field on each
do_check_insn() iteration.
[1] https://github.com/eddyz87/bpf/tree/ptrs-off-migration
Notable selftests changes:
- `.var_off` value changed because it now combines static and varying
offsets. Affected tests:
- linked_list/incorrect_node_var_off
- linked_list/incorrect_head_var_off2
- verifier_align/packet_variable_offset
- Overflowing `smax_value` bound leads to a pointer with big negative
or positive offset to be rejected immediately (previously overflowing
`rX += const` instruction updated `.off` field avoiding the overflow).
Affected tests:
- verifier_align/dubious_pointer_arithmetic
- verifier_bounds/var_off_insn_off_test1
- Invalid access to packet now reports full offset inside a packet.
Affected tests:
- verifier_direct_packet_access/test23_x_pkt_ptr_4
- A change in check_mem_region_access() behavior:
when register `.smin_value` is negative, it reports
"rX min value is negative..." before calling into __check_mem_access()
which reports "invalid access to ...".
In the tests below, the `.off` field was negative, while `.smin_value`
remained positive. This is no longer the case after the changes in
this commit. Affected tests:
- verifier_gotox/jump_table_invalid_mem_acceess_neg
- verifier_helper_packet_access/test15_cls_helper_fail_sub
- verifier_helper_value_access/imm_out_of_bound_2
- verifier_helper_value_access/reg_out_of_bound_2
- verifier_meta_access/meta_access_test2
- verifier_value_ptr_arith/known_scalar_from_different_maps
- lower_oob_arith_test_1
- value_ptr_known_scalar_3
- access_value_ptr_known_scalar
- Usage of check_mem_region_access() instead of __check_mem_access()
in check_packet_access() changes the reported message from
"rX offset is outside ..." to "rX min/max value is outside ...".
Affected tests:
- verifier_xdp_direct_packet_access/*
- In check_func_arg_reg_off() the check for zero offset now operates
on `.var_off` field instead of `.off` field. For tests where the
pattern looks like `kfunc(reg_with_var_off, ...)`, this changes the
reported error:
- previously the error "variable ... access ... disallowed"
was reported by __check_ptr_off_reg();
- now "R1 must have zero offset ..." is reported by
check_func_arg_reg_off() itself.
Affected tests:
- verifier/calls.c
"calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset"
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260212-ptrs-off-migration-v2-2-00820e4d3438@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
check_reg_sane_offset() is used when verifying operations like:
dst_reg += src_reg
^ ^
| '-------- scalar
'------------------- pointer
To verify range for both dst_reg and src_reg. Split it in two parts:
- one to check a pointer offset
- another to check scalar offset
This would be useful for further refactoring.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260212-ptrs-off-migration-v2-1-00820e4d3438@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The add_fd_from_fd_array() function takes a file descriptor as a
parameter and tries to add either map or btf to the corresponding
list of used objects. As was reported by Dan Carpenter, since the
commit c81e4322acf0 ("bpf: Fix a potential use-after-free of BTF
object"), the fdget() is called twice on the file descriptor, and
thus userspace, potentially, can replace the file pointed to by the
file descriptor in between the two calls. On practice, this shouldn't
break anything on the kernel side, but for consistency fix the code
such that only one fdget() is executed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/aY689z7gHNv8rgVO@stanley.mountain/
Fixes: ccd2d799ed44 ("bpf: Fix a potential use-after-free of BTF object")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260213212949.759321-1-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Refcounting in the check_pseudo_btf_id() function is incorrect:
the __check_pseudo_btf_id() function might get called with a zero
refcounted btf. Fix this, and patch related code accordingly.
v3: rephrase a comment (AI)
v2: fix a refcount leak introduced in v1 (AI)
Reported-by: syzbot+5a0f1995634f7c1dadbf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5a0f1995634f7c1dadbf
Fixes: 76145f725532 ("bpf: Refactor check_pseudo_btf_id")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260209132904.63908-1-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
Take care of rqspinlock error in bpf_local_storage_{map_free, destroy}()
properly by switching to bpf_selem_unlink_nofail().
Both functions iterate their own RCU-protected list of selems and call
bpf_selem_unlink_nofail(). In map_free(), to prevent infinite loop when
both map_free() and destroy() fail to remove a selem from b->list
(extremely unlikely), switch to hlist_for_each_entry_rcu(). In destroy(),
also switch to hlist_for_each_entry_rcu() since we no longer iterate
local_storage->list under local_storage->lock.
bpf_selem_unlink() now becomes dedicated to helpers and syscalls paths
so reuse_now should always be false. Remove it from the argument and
hardcode it.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-12-ameryhung@gmail.com
|
|
Introduce bpf_selem_unlink_nofail() to properly handle errors returned
from rqspinlock in bpf_local_storage_map_free() and
bpf_local_storage_destroy() where the operation must succeeds.
The idea of bpf_selem_unlink_nofail() is to allow an selem to be
partially linked and use atomic operation on a bit field, selem->state,
to determine when and who can free the selem if any unlink under lock
fails. An selem initially is fully linked to a map and a local storage.
Under normal circumstances, bpf_selem_unlink_nofail() will be able to
grab locks and unlink a selem from map and local storage in sequeunce,
just like bpf_selem_unlink(), and then free it after an RCU grace period.
However, if any of the lock attempts fails, it will only clear
SDATA(selem)->smap or selem->local_storage depending on the caller and
set SELEM_MAP_UNLINKED or SELEM_STORAGE_UNLINKED according to the
caller. Then, after both map_free() and destroy() see the selem and the
state becomes SELEM_UNLINKED, one of two racing caller can succeed in
cmpxchg the state from SELEM_UNLINKED to SELEM_TOFREE, ensuring no
double free or memory leak.
To make sure bpf_obj_free_fields() is done only once and when map is
still present, it is called when unlinking an selem from b->list under
b->lock.
To make sure uncharging memory is done only when the owner is still
present in map_free(), block destroy() from returning until there is no
pending map_free().
Since smap may not be valid in destroy(), bpf_selem_unlink_nofail()
skips bpf_selem_unlink_storage_nolock_misc() when called from destroy().
This is okay as bpf_local_storage_destroy() will return the remaining
amount of memory charge tracked by mem_charge to the owner to uncharge.
It is also safe to skip clearing local_storage->owner and owner_storage
as the owner is being freed and no users or bpf programs should be able
to reference the owner and using local_storage.
Finally, access of selem, SDATA(selem)->smap and selem->local_storage
are racy. Callers will protect these fields with RCU.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-11-ameryhung@gmail.com
|
|
The next patch will introduce bpf_selem_unlink_nofail() to handle
rqspinlock errors. bpf_selem_unlink_nofail() will allow an selem to be
partially unlinked from map or local storage. Save memory allocation
method in selem so that later an selem can be correctly freed even when
SDATA(selem)->smap is init to NULL.
In addition, keep track of memory charge to the owner in local storage
so that later bpf_selem_unlink_nofail() can return the correct memory
charge to the owner. Updating local_storage->mem_charge is protected by
local_storage->lock.
Finally, extract miscellaneous tasks performed when unlinking an selem
from local_storage into bpf_selem_unlink_storage_nolock_misc(). It will
be reused by bpf_selem_unlink_nofail().
This patch also takes the chance to remove local_storage->smap, which
is no longer used since commit f484f4a3e058 ("bpf: Replace bpf memory
allocator with kmalloc_nolock() in local storage").
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-10-ameryhung@gmail.com
|
|
Percpu locks have been removed from cgroup and task local storage. Now
that all local storage no longer use percpu variables as locks preventing
recursion, there is no need to pass them to bpf_local_storage_map_free().
Remove the argument from the function.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-9-ameryhung@gmail.com
|
|
The percpu counter in cgroup local storage is no longer needed as the
underlying bpf_local_storage can now handle deadlock with the help of
rqspinlock. Remove the percpu counter and related migrate_{disable,
enable}.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-8-ameryhung@gmail.com
|
|
The percpu counter in task local storage is no longer needed as the
underlying bpf_local_storage can now handle deadlock with the help of
rqspinlock. Remove the percpu counter and related migrate_{disable,
enable}.
Since the percpu counter is removed, merge back bpf_task_storage_get()
and bpf_task_storage_get_recur(). This will allow the bpf syscalls and
helpers to run concurrently on the same CPU, removing the spurious
-EBUSY error. bpf_task_storage_get(..., F_CREATE) will now always
succeed with enough free memory unless being called recursively.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-7-ameryhung@gmail.com
|
|
Change bpf_local_storage::lock and bpf_local_storage_map_bucket::lock
from raw_spin_lock to rqspinlock.
Finally, propagate errors from raw_res_spin_lock_irqsave() to syscall
return or BPF helper return.
In bpf_local_storage_destroy(), ignore return from
raw_res_spin_lock_irqsave() for now. A later patch will correctly
handle errors correctly in bpf_local_storage_destroy() so that it can
unlink selems even when failing to acquire locks.
For __bpf_local_storage_map_cache(), instead of handling the error,
skip updating the cache.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-6-ameryhung@gmail.com
|
|
To prepare changing both bpf_local_storage_map_bucket::lock and
bpf_local_storage::lock to rqspinlock, convert bpf_selem_unlink() to
failable. It still always succeeds and returns 0 until the change
happens. No functional change.
Open code bpf_selem_unlink_storage() in the only caller,
bpf_selem_unlink(), since unlink_map and unlink_storage must be done
together after all the necessary locks are acquired.
For bpf_local_storage_map_free(), ignore the return from
bpf_selem_unlink() for now. A later patch will allow it to unlink selems
even when failing to acquire locks.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-5-ameryhung@gmail.com
|
|
To prepare for changing bpf_local_storage_map_bucket::lock to rqspinlock,
convert bpf_selem_link_map() to failable. It still always succeeds and
returns 0 until the change happens. No functional change.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-4-ameryhung@gmail.com
|
|
To prepare for changing bpf_local_storage_map_bucket::lock to rqspinlock,
convert bpf_selem_unlink_map() to failable. It still always succeeds and
returns 0 for now.
Since some operations updating local storage cannot fail in the middle,
open-code bpf_selem_unlink_map() to take the b->lock before the
operation. There are two such locations:
- bpf_local_storage_alloc()
The first selem will be unlinked from smap if cmpxchg owner_storage_ptr
fails, which should not fail. Therefore, hold b->lock when linking
until allocation complete. Helpers that assume b->lock is held by
callers are introduced: bpf_selem_link_map_nolock() and
bpf_selem_unlink_map_nolock().
- bpf_local_storage_update()
The three step update process: link_map(new_selem),
link_storage(new_selem), and unlink_map(old_selem) should not fail in
the middle.
In bpf_selem_unlink(), bpf_selem_unlink_map() and
bpf_selem_unlink_storage() should either all succeed or fail as a whole
instead of failing in the middle. So, return if unlink_map() failed.
Remove the selem_linked_to_map_lockless() check as an selem in the
common paths (not bpf_local_storage_map_free() or
bpf_local_storage_destroy()), will be unlinked under b->lock and
local_storage->lock and therefore no other threads can unlink the selem
from map at the same time.
In bpf_local_storage_destroy(), ignore the return of
bpf_selem_unlink_map() for now. A later patch will allow
bpf_local_storage_destroy() to unlink selems even when failing to
acquire locks.
Note that while this patch removes all callers of selem_linked_to_map(),
a later patch that introduces bpf_selem_unlink_nofail() will use it
again.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-3-ameryhung@gmail.com
|
|
A later bpf_local_storage refactor will acquire all locks before
performing any update. To simplified the number of locks needed to take
in bpf_local_storage_map_update(), determine the bucket based on the
local_storage an selem belongs to instead of the selem pointer.
Currently, when a new selem needs to be created to replace the old selem
in bpf_local_storage_map_update(), locks of both buckets need to be
acquired to prevent racing. This can be simplified if the two selem
belongs to the same bucket so that only one bucket needs to be locked.
Therefore, instead of hashing selem, hashing the local_storage pointer
the selem belongs.
Performance wise, this is slightly better as update now requires locking
one bucket. It should not change the level of contention on one bucket
as the pointers to local storages of selems in a map are just as unique
as pointers to selems.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-2-ameryhung@gmail.com
|
|
call_rcu_tasks_trace() is not safe from in_nmi() and not reentrant.
To prevent deadlock on raw_spin_lock_rcu_node(rtpcp) or memory corruption
defer to irq_work when IRQs are disabled. call_rcu_tasks_generic()
protects itself with local_irq_save().
Note when bpf_async_cb->refcnt drops to zero it's safe to reuse
bpf_async_cb->worker for a different irq_work callback, since
bpf_async_schedule_op() -> irq_work_queue(&cb->worker);
is only called when refcnt >= 1.
Fixes: 1bfbc267ec91 ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com
|
|
Currently, bpf_map_get_info_by_fd calculates and caches the hash of the
map regardless of the map's frozen state.
This leads to a TOCTOU bug where userspace can call
BPF_OBJ_GET_INFO_BY_FD to cache the hash and then modify the map
contents before freezing.
Therefore, a trusted loader can be tricked into verifying the stale hash
while loading the modified contents.
Fix this by returning -EPERM if the map is not frozen when the hash is
requested. This ensures the hash is only generated for the final,
immutable state of the map.
Fixes: ea2e6467ac36 ("bpf: Return hashes of maps in BPF_OBJ_GET_INFO_BY_FD")
Reported-by: Toshi Piazza <toshi.piazza@microsoft.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260205070755.695776-1-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc).
Fixes: 349271568303 ("bpf: Implement signature verification for BPF programs")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260205063807.690823-1-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace prog and callback in bpf_async_cb after removing visibility of
bpf_async_cb in bpf_async_cancel_and_free() to increase the chances the
scheduled async callbacks short-circuit execution and exit early, and
not starting a RCU tasks trace section. This improves the overall time
spent in running the wq selftest.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260205003853.527571-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When freeing a bpf_async_cb in bpf_async_cb_rcu_tasks_trace_free(), in
case the wq callback is not scheduled, doing cancel_work() currently
returns false and leads to retry of RCU tasks trace grace period. If the
callback is never scheduled, we keep retrying indefinitely and don't put
the prog reference.
Since the only race we care about here is against a potentially running
wq callback in the first grace period, it should finish by the second
grace period, hence check work_busy() result to detect presence of
running wq callback if it's not pending, otherwise free the object
immediately without retrying.
Reasoning behind the check and its correctness with racing wq callback
invocation: cancel_work is supposed to be synchronized, hence calling it
first and getting false would mean that work is definitely not pending,
at this point, either the work is not scheduled at all or already
running, or we race and it already finished by the time we checked for
it using work_busy(). In case it is running, we synchronize using
pool->lock to check the current work running there, if we match, it
means we extend the wait by another grace period using retry = true,
otherwise either the work already finished running or was never
scheduled, so we can free the bpf_async_cb right away.
Fixes: 1bfbc267ec91 ("bpf: Enable bpf_timer and bpf_wq in any context")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260205003853.527571-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Previously, the verifier only tracked positive constant deltas between
linked registers using BPF_ADD. This limitation meant patterns like:
r1 = r0;
r1 += -4;
if r1 s>= 0 goto l0_%=; // r1 >= 0 implies r0 >= 4
// verifier couldn't propagate bounds back to r0
if r0 != 0 goto l0_%=;
r0 /= 0; // Verifier thinks this is reachable
l0_%=:
Similar limitation exists for 32-bit registers.
With this change, the verifier can now track negative deltas in reg->off
enabling bound propagation for the above pattern.
For alu32, we make sure the destination register has the upper 32 bits
as 0s before creating the link. BPF_ADD_CONST is split into
BPF_ADD_CONST64 and BPF_ADD_CONST32, the latter is used in case of alu32
and sync_linked_regs uses this to zext the result if known_reg has this
flag.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260204151741.2678118-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch implements bitwise tracking (tnum analysis) for BPF_END
(byte swap) operation.
Currently, the BPF verifier does not track value for BPF_END operation,
treating the result as completely unknown. This limits the verifier's
ability to prove safety of programs that perform endianness conversions,
which are common in networking code.
For example, the following code pattern for port number validation:
int test(struct pt_regs *ctx) {
__u64 x = bpf_get_prandom_u32();
x &= 0x3f00; // Range: [0, 0x3f00], var_off: (0x0; 0x3f00)
x = bswap16(x); // Should swap to range [0, 0x3f], var_off: (0x0; 0x3f)
if (x > 0x3f) goto trap;
return 0;
trap:
return *(u64 *)NULL; // Should be unreachable
}
Currently generates verifier output:
1: (54) w0 &= 16128 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=16128,var_off=(0x0; 0x3f00))
2: (d7) r0 = bswap16 r0 ; R0=scalar()
3: (25) if r0 > 0x3f goto pc+2 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=63,var_off=(0x0; 0x3f))
Without this patch, even though the verifier knows `x` has certain bits
set, after bswap16, it loses all tracking information and treats port
as having a completely unknown value [0, 65535].
According to the BPF instruction set[1], there are 3 kinds of BPF_END:
1. `bswap(16|32|64)`: opcode=0xd7 (BPF_END | BPF_ALU64 | BPF_TO_LE)
- do unconditional swap
2. `le(16|32|64)`: opcode=0xd4 (BPF_END | BPF_ALU | BPF_TO_LE)
- on big-endian: do swap
- on little-endian: truncation (16/32-bit) or no-op (64-bit)
3. `be(16|32|64)`: opcode=0xdc (BPF_END | BPF_ALU | BPF_TO_BE)
- on little-endian: do swap
- on big-endian: truncation (16/32-bit) or no-op (64-bit)
Since BPF_END operations are inherently bit-wise permutations, tnum
(bitwise tracking) offers the most efficient and precise mechanism
for value analysis. By implementing `tnum_bswap16`, `tnum_bswap32`,
and `tnum_bswap64`, we can derive exact `var_off` values concisely,
directly reflecting the bit-level changes.
Here is the overview of changes:
1. In `tnum_bswap(16|32|64)` (kernel/bpf/tnum.c):
Call `swab(16|32|64)` function on the value and mask of `var_off`, and
do truncation for 16/32-bit cases.
2. In `adjust_scalar_min_max_vals` (kernel/bpf/verifier.c):
Call helper function `scalar_byte_swap`.
- Only do byte swap when
* alu64 (unconditional swap) OR
* switching between big-endian and little-endian machines.
- If need do byte swap:
* Firstly call `tnum_bswap(16|32|64)` to update `var_off`.
* Then reset the bound since byte swap scrambles the range.
- For 16/32-bit cases, truncate dst register to match the swapped size.
This enables better verification of networking code that frequently uses
byte swaps for protocol processing, reducing false positive rejections.
[1] https://www.kernel.org/doc/Documentation/bpf/standardization/instruction-set.rst
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Yazhou Tang <tangyazhou518@outlook.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260204111503.77871-2-ziye@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Do not schedule timer/wq operation on a cpu that is in irq_work
callback that is processing async_cmds queue.
Otherwise the following loop is possible:
bpf_timer_start() -> bpf_async_schedule_op() -> irq_work_queue().
irqrestore -> bpf_async_irq_worker() -> tracepoint -> bpf_timer_start().
Fixes: 1bfbc267ec91 ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260204055147.54960-4-alexei.starovoitov@gmail.com
|
|
Though hrtimer_start/cancel() inlines all of the smaller helpers in
hrtimer.c and only call timerqueue_add/del() from lib/timerqueue.c where
everything is not traceable and not kprobe-able (because all files in
lib/ are not traceable), there are tracepoints within hrtimer that are
called with locks held. Therefore prevent the deadlock by tightening
conditions when timer/wq can be called synchronously.
hrtimer/wq are using raw_spin_lock_irqsave(), so irqs_disabled() is enough.
Fixes: 1bfbc267ec91 ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260204055147.54960-2-alexei.starovoitov@gmail.com
|
|
sk->sk_family should be read with READ_ONCE() in
__cgroup_bpf_run_filter_sock_addr() due to IPV6_ADDRFORM.
Also, the comment there is a bit stale since commit 859051dd165e
("bpf: Implement cgroup sockaddr hooks for unix sockets"), and the
kdoc has the same comment.
Let's use sk_is_inet() and sk_is_unix() and remove the comment.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260203213442.682838-2-kuniyu@google.com
|
|
Introduce bpf_timer_cancel_async() that wraps hrtimer_try_to_cancel()
and executes it either synchronously or defers to irq_work.
Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-4-alexei.starovoitov@gmail.com
|
|
Extend the verifier to recognize struct bpf_timer as a valid kfunc
argument type. Previously, bpf_timer was only supported in BPF helpers.
This prepares for adding timer-related kfuncs in subsequent patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-3-alexei.starovoitov@gmail.com
|
|
Refactor bpf_timer and bpf_wq to allow calling them from any context:
- add refcnt to bpf_async_cb
- map_delete_elem or map_free will drop refcnt to zero
via bpf_async_cancel_and_free()
- once refcnt is zero timer/wq_start is not allowed to make sure
that callback cannot rearm itself
- if in_hardirq defer to start/cancel operations to irq_work
Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260201025403.66625-2-alexei.starovoitov@gmail.com
|
|
The BPF stream kfuncs bpf_stream_vprintk and bpf_stream_print_stack
do not sleep and so are safe to call while holding a lock. Amend
the verifier to allow that.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-4-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new kfunc called bpf_stream_print_stack to be used by programs
that need to print out their current BPF stack. The kfunc is essentially
a wrapper around the existing bpf_stream_dump_stack functionality used
to generate stack traces for error events like may_goto violations and
BPF-side arena page faults.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Scalar register IDs are used by the verifier to track relationships
between registers and enable bounds propagation across those
relationships. Once an ID becomes singular (i.e. only a single
register/stack slot carries it), it can no longer contribute to bounds
propagation and effectively becomes stale. The previous commit makes the
verifier clear such ids before caching the state.
When comparing the current and cached states for pruning, these stale
IDs can cause technically equivalent states to be considered different
and thus prevent pruning.
For example, in the selftest added in the next commit, two registers -
r6 and r7 are not linked to any other registers and get cached with
id=0, in the current state, they are both linked to each other with
id=A. Before this commit, check_scalar_ids would give temporary ids to
r6 and r7 (say tid1 and tid2) and then check_ids() would map tid1->A,
and when it would see tid2->A, it would not consider these state
equivalent.
Relax scalar ID equivalence by treating rold->id == 0 as "independent":
if the old state did not rely on any ID relationships for a register,
then any ID/linking present in the current state only adds constraints
and is always safe to accept for pruning. Implement this by returning
true immediately in check_scalar_ids() when old_id == 0.
Maintain correctness for the opposite direction (old_id != 0 && cur_id
== 0) by still allocating a temporary ID for cur_id == 0. This avoids
incorrectly allowing multiple independent current registers (id==0) to
satisfy a single linked old ID during mapping.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-5-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The maybe_widen_reg() function widens imprecise scalar registers to
unknown when their values differ between the cached and current states.
Previously, it used regs_exact() which also compared register IDs via
check_ids(), requiring registers to have matching IDs (or mapped IDs) to
be considered exact.
For scalar widening purposes, what matters is whether the value tracking
(bounds, tnum, var_off) is the same, not whether the IDs match. Two
scalars with identical value constraints but different IDs represent the
same abstract value and don't need to be widened.
Introduce scalars_exact_for_widen() that only compares the
value-tracking portion of bpf_reg_state (fields before 'id'). This
allows the verifier to preserve more scalar value information during
state merging when IDs differ but actual tracked values are identical,
reducing unnecessary widening and potentially improving verification
precision.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The verifier assigns ids to scalar registers/stack slots when they are
linked through a mov or stack spill/fill instruction. These ids are
later used to propagate newly found bounds from one register to all
registers that share the same id. The verifier also compares the ids of
these registers in current state and cached state when making pruning
decisions.
When an ID becomes singular (i.e., only a single register or stack slot
has that ID), it can no longer participate in bounds propagation. During
comparisons between current and cached states for pruning decisions,
however, such stale IDs can prevent pruning of otherwise equivalent
states.
Find and clear all singular ids before caching a state in
is_state_visited(). struct bpf_idset which is currently unused has been
repurposed for this use case.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The next commit will allow clearing of scalar ids if no other
register/stack slot has that id. This is because if only one register
has a unique id, it can't participate in bounds propagation and is
equivalent to having no id.
But if the id of a stack slot is cleared by clear_singular_ids() in the
next commit, reading that stack slot into a register will not establish
a link because the stack slot's id is cleared.
This can happen in a situation where a register is spilled and later
loses its id due to a multiply operation (for example) and then the
stack slot's id becomes singular and can be cleared.
Make sure that scalar stack slots have an id before we read them into a
register.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace snprintf("%s") with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20260201215247.677121-2-thorsten.blum@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The added fsession does not prevent running on those architectures, that
haven't added fsession support.
For example, try to run fsession tests on arm64:
test_fsession_basic:PASS:fsession_test__open_and_load 0 nsec
test_fsession_basic:PASS:fsession_attach 0 nsec
check_result:FAIL:test_run_opts err unexpected error: -14 (errno 14)
In order to prevent such errors, add bpf_jit_supports_fsession() to guard
those architectures.
Fixes: 2d419c44658f ("bpf: add fsession support")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Consolidate all logic for verifying special map fields in the single
function check_map_field_pointer().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260130-verif_special_fields-v2-2-2c59e637da7d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
