| Age | Commit message (Collapse) | Author |
|---|
|
Introduce device wedged event, which notifies userspace of 'wedged'
(hanged/unusable) state of the DRM device through a uevent. This is
useful especially in cases where the device is no longer operating as
expected and has become unrecoverable from driver context. Purpose of
this implementation is to provide drivers a generic way to recover the
device with the help of userspace intervention without taking any drastic
measures (like resetting or re-enumerating the full bus, on which the
underlying physical device is sitting) in the driver.
A 'wedged' device is basically a device that is declared dead by the
driver after exhausting all possible attempts to recover it from driver
context. The uevent is the notification that is sent to userspace along
with a hint about what could possibly be attempted to recover the device
from userspace and bring it back to usable state. Different drivers may
have different ideas of a 'wedged' device depending on hardware
implementation of the underlying physical device, and hence the vendor
agnostic nature of the event. It is up to the drivers to decide when they
see the need for device recovery and how they want to recover from the
available methods.
Driver prerequisites
--------------------
The driver, before opting for recovery, needs to make sure that the
'wedged' device doesn't harm the system as a whole by taking care of the
prerequisites. Necessary actions must include disabling DMA to system
memory as well as any communication channels with other devices. Further,
the driver must ensure that all dma_fences are signalled and any device
state that the core kernel might depend on is cleaned up. All existing
mmaps should be invalidated and page faults should be redirected to a
dummy page. Once the event is sent, the device must be kept in 'wedged'
state until the recovery is performed. New accesses to the device
(IOCTLs) should be rejected, preferably with an error code that resembles
the type of failure the device has encountered. This will signify the
reason for wedging, which can be reported to the application if needed.
Recovery
--------
Current implementation defines three recovery methods, out of which,
drivers can use any one, multiple or none. Method(s) of choice will be
sent in the uevent environment as ``WEDGED=<method1>[,..,<methodN>]`` in
order of less to more side-effects. If driver is unsure about recovery
or method is unknown (like soft/hard system reboot, firmware flashing,
physical device replacement or any other procedure which can't be
attempted on the fly), ``WEDGED=unknown`` will be sent instead.
Userspace consumers can parse this event and attempt recovery as per the
following expectations.
=============== ========================================
Recovery method Consumer expectations
=============== ========================================
none optional telemetry collection
rebind unbind + bind driver
bus-reset unbind + bus reset/re-enumeration + bind
unknown consumer policy
=============== ========================================
The only exception to this is ``WEDGED=none``, which signifies that the
device was temporarily 'wedged' at some point but was recovered from driver
context using device specific methods like reset. No explicit recovery is
expected from the consumer in this case, but it can still take additional
steps like gathering telemetry information (devcoredump, syslog). This is
useful because the first hang is usually the most critical one which can
result in consequential hangs or complete wedging.
Consumer prerequisites
----------------------
It is the responsibility of the consumer to make sure that the device or
its resources are not in use by any process before attempting recovery.
With IOCTLs erroring out, all device memory should be unmapped and file
descriptors should be closed to prevent leaks or undefined behaviour. The
idea here is to clear the device of all user context beforehand and set
the stage for a clean recovery.
Example
-------
Udev rule::
SUBSYSTEM=="drm", ENV{WEDGED}=="rebind", DEVPATH=="*/drm/card[0-9]",
RUN+="/path/to/rebind.sh $env{DEVPATH}"
Recovery script::
#!/bin/sh
DEVPATH=$(readlink -f /sys/$1/device)
DEVICE=$(basename $DEVPATH)
DRIVER=$(readlink -f $DEVPATH/driver)
echo -n $DEVICE > $DRIVER/unbind
echo -n $DEVICE > $DRIVER/bind
Customization
-------------
Although basic recovery is possible with a simple script, consumers can
define custom policies around recovery. For example, if the driver supports
multiple recovery methods, consumers can opt for the suitable one depending
on scenarios like repeat offences or vendor specific failures. Consumers
can also choose to have the device available for debugging or telemetry
collection and base their recovery decision on the findings. This is useful
especially when the driver is unsure about recovery or method is unknown.
v4: s/drm_dev_wedged/drm_dev_wedged_event
Use drm_info() (Jani)
Kernel doc adjustment (Aravind)
v5: Send recovery method with uevent (Lina)
v6: Access wedge_recovery_opts[] using helper function (Jani)
Use snprintf() (Jani)
v7: Convert recovery helpers into regular functions (Andy, Jani)
Aesthetic adjustments (Andy)
Handle invalid recovery method
v8: Allow sending multiple methods with uevent (Lucas, Michal)
static_assert() globally (Andy)
v9: Provide 'none' method for device reset (Christian)
Provide recovery opts using switch cases
v11: Log device reset (André)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-2-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This reverts commit 011b0335903832facca86cd8ed05d7d8d94c9c76.
Sabrina reports that the revert may trigger warnings due to intervening
changes, especially the ability to rise MAX_SKB_FRAGS. Let's drop it
and revisit once that part is also ironed out.
Fixes: 011b03359038 ("Revert "net: skb: introduce and use a single page frag cache"")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/6bf54579233038bc0e76056c5ea459872ce362ab.1739375933.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove commented out code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250211102057.587182-1-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add SoundWire support for ACP7.0 and ACP7.1 platforms.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-4-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This fixes the following trace by reworking the locking of l2cap_conn
so instead of only locking when changing the chan_l list this promotes
chan_lock to a general lock of l2cap_conn so whenever it is being held
it would prevents the likes of l2cap_conn_del to run:
list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:61!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__list_del_entry_valid include/linux/list.h:124 [inline]
__list_del_entry include/linux/list.h:215 [inline]
list_del_rcu include/linux/rculist.h:168 [inline]
hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858
l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline]
kref_put include/linux/kref.h:65 [inline]
l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830
l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377
l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416
__sock_release net/socket.c:642 [inline]
sock_close+0xbc/0x240 net/socket.c:1393
__fput+0x3e9/0x9f0 fs/file_table.c:448
task_work_run+0x24f/0x310 kernel/task_work.c:227
ptrace_notify+0x2d2/0x380 kernel/signal.c:2522
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7aceeaf449
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449
RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004
RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
i2c_of_match_device() is not used anymore outside of I²C framework,
unexport it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()")
Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
drm_atomic_helper_reset_crtc() allows to reset the CRTC active outputs.
This resets all active components available between the CRTC and
connectors.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-3-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Fix a number of hangs in the netfslib read-retry code, including:
(1) netfs_reissue_read() doubles up the getting of references on
subrequests, thereby leaking the subrequest and causing inode eviction
to wait indefinitely. This can lead to the kernel reporting a hang in
the filesystem's evict_inode().
Fix this by removing the get from netfs_reissue_read() and adding one
to netfs_retry_read_subrequests() to deal with the one place that
didn't double up.
(2) The loop in netfs_retry_read_subrequests() that retries a sequence of
failed subrequests doesn't record whether or not it retried the one
that the "subreq" pointer points to when it leaves the loop. It may
not if renegotiation/repreparation of the subrequests means that fewer
subrequests are needed to span the cumulative range of the sequence.
Because it doesn't record this, the piece of code that discards
now-superfluous subrequests doesn't know whether it should discard the
one "subreq" points to - and so it doesn't.
Fix this by noting whether the last subreq it examines is superfluous
and if it is, then getting rid of it and all subsequent subrequests.
If that one one wasn't superfluous, then we would have tried to go
round the previous loop again and so there can be no further unretried
subrequests in the sequence.
(3) netfs_retry_read_subrequests() gets yet an extra ref on any additional
subrequests it has to get because it ran out of ones it could reuse to
to renegotiation/repreparation shrinking the subrequests.
Fix this by removing that extra ref.
(4) In netfs_retry_reads(), it was using wait_on_bit() to wait for
NETFS_SREQ_IN_PROGRESS to be cleared on all subrequests in the
sequence - but netfs_read_subreq_terminated() is now using a wait
queue on the request instead and so this wait will never finish.
Fix this by waiting on the wait queue instead. To make this work, a
new flag, NETFS_RREQ_RETRYING, is now set around the wait loop to tell
the wake-up code to wake up the wait queue rather than requeuing the
request's work item.
Note that this flag replaces the NETFS_RREQ_NEED_RETRY flag which is
no longer used.
(5) Whilst not strictly anything to do with the hang,
netfs_retry_read_subrequests() was also doubly incrementing the
subreq_counter and re-setting the debug index, leaving a gap in the
trace. This is also fixed.
One of these hangs was observed with 9p and with cifs. Others were forced
by manual code injection into fs/afs/file.c. Firstly, afs_prepare_read()
was created to provide an changing pattern of maximum subrequest sizes:
static int afs_prepare_read(struct netfs_io_subrequest *subreq)
{
struct netfs_io_request *rreq = subreq->rreq;
if (!S_ISREG(subreq->rreq->inode->i_mode))
return 0;
if (subreq->retry_count < 20)
rreq->io_streams[0].sreq_max_len =
umax(200, 2222 - subreq->retry_count * 40);
else
rreq->io_streams[0].sreq_max_len = 3333;
return 0;
}
and pointed to by afs_req_ops. Then the following:
struct netfs_io_subrequest *subreq = op->fetch.subreq;
if (subreq->error == 0 &&
S_ISREG(subreq->rreq->inode->i_mode) &&
subreq->retry_count < 20) {
subreq->transferred = subreq->already_done;
__clear_bit(NETFS_SREQ_HIT_EOF, &subreq->flags);
__set_bit(NETFS_SREQ_NEED_RETRY, &subreq->flags);
afs_fetch_data_notify(op);
return;
}
was inserted into afs_fetch_data_success() at the beginning and struct
netfs_io_subrequest given an extra field, "already_done" that was set to
the value in "subreq->transferred" by netfs_reissue_read().
When reading a 4K file, the subrequests would get gradually smaller, a new
subrequest would be allocated around the 3rd retry and then eventually be
rendered superfluous when the 20th retry was hit and the limit on the first
subrequest was eased.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250212222402.3618494-2-dhowells@redhat.com
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Steve French <stfrench@microsoft.com>
cc: Ihor Solodrai <ihor.solodrai@pm.me>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Merge the immutable branch rockchip into next, to allow it to be tested
together with the changes that are targeted for v6.15.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
For some usecases a consumer driver requires its device to remain power-on
from the PM domain perspective during runtime. Using dev PM qos along with
the genpd governors, doesn't work for this case as would potentially
prevent the device from being runtime suspended too.
To support these usecases, let's introduce dev_pm_genpd_rpm_always_on() to
allow consumers drivers to dynamically control the behaviour in genpd for a
device that is attached to it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1738736156-119203-4-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add ROCKCHIP_SIP_SUSPEND_MODE to pass down parameters to Trusted Firmware
in order to decide suspend mode. Currently only add ROCKCHIP_SLEEP_PD_CONFIG
which teaches firmware to power down controllers or not.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/1738736156-119203-3-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
During an earlier commit, the comment from SM6350 was copied without
modifying. Adjust the comment to reflect the defines.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241202-rpmpd-sm6375-v1-1-12a4f0182133@fairphone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add keymap for the Siemens Gigaset RC20 remote (RC-5).
Signed-off-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
|
|
Some users are reporting journal replay takes a long time when there is
excessive number of revoke blocks in the journal. Reported times are
like:
1048576 records - 95 seconds
2097152 records - 580 seconds
The problem is that hash chains in the revoke table gets excessively
long in these cases. Fix the problem by sizing the revoke table
appropriately before the revoke pass.
Thanks to Alexey Zhuravlev <azhuravlev@ddn.com> for benchmarking the
patch with large numbers of revoke blocks [1].
[1] https://lore.kernel.org/all/20250113183107.7bfef7b6@x390.bzzz77.ru
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250121140925.17231-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
After commit 5d4cc87414c5 ("net: reorganize "struct sock" fields"),
the sk_tsflags field shares the same cacheline with sk_forward_alloc.
The UDP protocol does not acquire the sock lock in the RX path;
forward allocations are protected via the receive queue spinlock;
additionally udp_recvmsg() calls sock_recv_cmsgs() unconditionally
touching sk_tsflags on each packet reception.
Due to the above, under high packet rate traffic, when the BH and the
user-space process run on different CPUs, UDP packet reception
experiences a cache miss while accessing sk_tsflags.
The receive path doesn't strictly need to access the problematic field;
change sock_set_timestamping() to maintain the relevant information
in a newly allocated sk_flags bit, so that sock_recv_cmsgs() can
take decisions accessing the latter field only.
With this patch applied, on an AMD epic server with i40e NICs, I
measured a 10% performance improvement for small packets UDP flood
performance tests - possibly a larger delta could be observed with more
recent H/W.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/dbd18c8a1171549f8249ac5a8b30b1b5ec88a425.1739294057.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The third pwr_change_notify() argument is an input parameter. Make this
explicit by declaring it 'const'.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250212213838.1044917-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The names RESERVE and RELEASE are not only used in <scsi/scsi_proto.h> but
also elsewhere in the kernel:
$ git grep -nHE 'define[[:blank:]]*(RESERVE|RELEASE)[[:blank:]]'
drivers/input/joystick/walkera0701.c:13:#define RESERVE 20000
drivers/s390/char/tape_std.h:56:#define RELEASE 0xD4 /* 3420 NOP, 3480 REJECT */
drivers/s390/char/tape_std.h:58:#define RESERVE 0xF4 /* 3420 NOP, 3480 REJECT */
Additionally, while the names of the symbolic constants RESERVE_10 and
RELEASE_10 include the command length, the command length is not included
in the RESERVE and RELEASE names. Address both issues by renaming the
RESERVE and RELEASE constants into RESERVE_6 and RELEASE_6 respectively.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250210205031.2970833-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Martin hi,
The UFS4.1 standard, released on January 8, 2025, added a new exception
event: HEALTH_CRITICAL, which notifies the host of a device's critical
health condition. This notification implies that the device is approaching
the end of its lifetime based on the amount of performed program/erase
cycles.
Once an EOL (End-of-Life) exception event is received, we increment a
designated member, which is exposed via a sysfs entry. This new entry, will
report the number of times a critical health event has been reported by a
UFS device.
To handle this new sysfs entry, userspace applications can use select(),
poll(), or epoll() to monitor changes in the critical_health attribute. The
kernel will call sysfs_notify() to signal changes, allowing the userspace
application to detect and respond to these changes efficiently.
The host can gain further insight into the specific issue by reading one of
the following attributes: bPreEOLInfo, bDeviceLifeTimeEstA,
bDeviceLifeTimeEstB, bWriteBoosterBufferLifeTimeEst, and
bRPMBLifeTimeEst. All those are available for reading via the driver's
sysfs entries or through an applicable utility. It is up to userspace to
read these attributes if needed.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250211065813.58091-1-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32c(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20250207041724.70733-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Provide a helper to determine whether the MAC operations structure
implements the LPI operations, which will be used by both phylink and
DSA.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thR9g-003vX6-4s@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add extra flag definition for ids_flag field to distinguish
between vf/pf/pt modes
v2: Updated kms driver minor version & removed pf check as default is 0
v3: Fix up version (Alex)
v4: rebase (Alex)
Proposed userspace:
https://github.com/ROCm/amdsmi/commit/e663bed7d6b3df79f5959e73981749b1f22ec698
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit 13c7c941e729 ("netdev: add qstat for csum complete") reserved
the entry for csum complete in the qstats uAPI. Start reporting this
value now that we have a driver which needs it.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the commit 0fb2970b4b6b ("drm/armada: remove non-component
support") there are no remaining users of the struct
tda998x_encoder_params. Drop the header and corresponding API from the
TDA998x driver.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-1-214e0682a5e4@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Introduce the `phy_get_next_update_time` function to allow PHY drivers
to dynamically determine the time (in jiffies) until the next state
update event. This enables more flexible and adaptive polling intervals
based on the link state or other conditions.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250210082358.200751-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add offload_flags to the documentation comment for struct spi_transfer.
This was missed when adding the field.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250212154356.784944ea@canb.auug.org.au/
Fixes: 700a281905f2 ("spi: add offload TX/RX streaming APIs")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250212-spi-offload-fixes-v1-1-e192c69e3bb3@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The whole purpose of the custom CLASS() is to have possibility
to initialise the counter variable _i to 0. This can't be done
with simple __free() macro as it will be not allowed by C language.
OTOH, the CLASS() operates with the pointers and explicit usage of
the scoped variable _data is not needed, since the pointers are kept
the same over the iterations. Simplify the implementation of
for_each_hwgpio_in_range().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250207151149.2119765-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Refactor for_each_requested_gpio_in_range() to deduplicate some code
which is basically repeats the for_each_hwgpio(). In order to achieve
this, split the latter to two, for_each_hwgpio_in_range() and
for_each_hwgpio().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250207151149.2119765-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Christian Brauner <brauner@kernel.org> says:
Currently, it isn't possible to change the idmapping of an idmapped
mount. This is becoming an obstacle for various use-cases.
/* idmapped home directories with systemd-homed */
On newer systems /home is can be an idmapped mount such that each file
on disk is owned by 65536 and a subfolder exists for foreign id ranges
such as containers. For example, a home directory might look like this
(using an arbitrary folder as an example):
user1@localhost:~/data/mount-idmapped$ ls -al /data/
total 16
drwxrwxrwx 1 65536 65536 36 Jan 27 12:15 .
drwxrwxr-x 1 root root 184 Jan 27 12:06 ..
-rw-r--r-- 1 65536 65536 0 Jan 27 12:07 aaa
-rw-r--r-- 1 65536 65536 0 Jan 27 12:07 bbb
-rw-r--r-- 1 65536 65536 0 Jan 27 12:07 cc
drwxr-xr-x 1 2147352576 2147352576 0 Jan 27 19:06 containers
When logging in home is mounted as an idmapped mount with the following
idmappings:
65536:$(id -u):1 // uid mapping
65536:$(id -g):1 // gid mapping
2147352576:2147352576:65536 // uid mapping
2147352576:2147352576:65536 // gid mapping
So for a user with uid/gid 1000 an idmapped /home would like like this:
user1@localhost:~/data/mount-idmapped$ ls -aln /mnt/
total 16
drwxrwxrwx 1 1000 1000 36 Jan 27 12:15 .
drwxrwxr-x 1 0 0 184 Jan 27 12:06 ..
-rw-r--r-- 1 1000 1000 0 Jan 27 12:07 aaa
-rw-r--r-- 1 1000 1000 0 Jan 27 12:07 bbb
-rw-r--r-- 1 1000 1000 0 Jan 27 12:07 cc
drwxr-xr-x 1 2147352576 2147352576 0 Jan 27 19:06 containers
In other words, 65536 is mapped to the user's uid/gid and the range
2147352576 up to 2147352576 + 65536 is an identity mapping for
containers.
When a container is started a transient uid/gid range is allocated
outside of both mappings of the idmapped mount. For example, the
container might get the idmapping:
$ cat /proc/1742611/uid_map
0 537985024 65536
This container will be allowed to write to disk within the allocated
foreign id range 2147352576 to 2147352576 + 65536. To do this an
idmapped mount must be created from an already idmapped mount such that:
- The mappings for the user's uid/gid must be dropped, i.e., the
following mappings are removed:
65536:$(id -u):1 // uid mapping
65536:$(id -g):1 // gid mapping
- A mapping for the transient uid/gid range to the foreign uid/gid range
is added:
2147352576:537985024:65536
In combination this will mean that the container will write to disk
within the foreign id range 2147352576 to 2147352576 + 65536.
/* nested containers */
When the outer container makes use of idmapped mounts it isn't posssible
to create an idmapped mount for the inner container with a differen
idmapping from the outer container's idmapped mount.
There are other usecases and the two above just serve as an illustration
of the problem.
This patchset makes it possible to create a new idmapped mount from an
already idmapped mount. It aims to adhere to current performance
constraints and requirements:
- Idmapped mounts aim to have near zero performance implications for
path lookup. That is why no refernce counting, locking or any other
mechanism can be required that would impact performance.
This works be ensuring that a regular mount transitions to an idmapped
mount once going from a static nop_mnt_idmap mapping to a non-static
idmapping.
- The idmapping of a mount change anymore for the lifetime of the mount
afterwards. This not just avoids UAF issues it also avoids pitfalls
such as generating non-matching uid/gid values.
Changing idmappings could be solved by:
- Idmappings could simply be reference counted (above the simple
reference count when sharing them across multiple mounts).
This would require pairing mnt_idmap_get() with mnt_idmap_put() which
would end up being sprinkled everywhere into the VFS and some
filesystems that access idmappings directly.
It wouldn't just be quite ugly and introduce new complexity it would
have a noticeable performance impact.
- Idmappings could gain RCU protection. This would help the LOOKUP_RCU
case and avoids taking reference counts under RCU.
When not under LOOKUP_RCU reference counts need to be acquired on each
idmapping. This would require pairing mnt_idmap_get() with
mnt_idmap_put() which would end up being sprinkled everywhere into the
VFS and some filesystems that access idmappings directly.
This would have the same downsides as mentioned earlier.
- The earlier solutions work by updating the mnt->mnt_idmap pointer with
the new idmapping. Instead of this it would be possible to change the
idmapping itself to avoid UAF issues.
To do this a sequence counter would have to be added to struct mount.
When retrieving the idmapping to generate uid/gid values the sequence
counter would need to be sampled and the generation of the uid/gid
would spin until the update of the idmap is finished.
This has problems as well but the biggest issue will be that this can
lead to inconsistent permission checking and inconsistent uid/gid
pairs even more than this is already possible today. Specifically,
during creation it could happen that:
idmap = mnt_idmap(mnt);
inode_permission(idmap, ...);
may_create(idmap);
// create file with uid/gid based on @idmap
in between the permission checking and the generation of the uid/gid
value the idmapping could change leading to the permission checking
and uid/gid value that is actually used to create a file on disk being
out of sync.
Similarly if two values are generated like:
idmap = mnt_idmap(mnt)
vfsgid = make_vfsgid(idmap);
// idmapping gets update concurrently
vfsuid = make_vfsuid(idmap);
@vfsgid and @vfsuid could be out of sync if the idmapping was changed
in between. The generation of vfsgid/vfsuid could span a lot of
codelines so to guard against this a sequence count would have to be
passed around.
The performance impact of this solutio are less clear but very likely
not zero.
- Using SRCU similar to fanotify that can sleep. I find that not just
ugly but it would have memory consumption implications and is overall
pretty ugly.
/* solution */
So, to avoid all of these pitfalls creating an idmapped mount from an
already idmapped mount will be done atomically, i.e., a new detached
mount is created and a new set of mount properties applied to it without
it ever having been exposed to userspace at all.
This can be done in two ways. A new flag to open_tree() is added
OPEN_TREE_CLEAR_IDMAP that clears the old idmapping and returns a mount
that isn't idmapped. And then it is possible to set mount attributes on
it again including creation of an idmapped mount.
This has the consequence that a file descriptor must exist in userspace
that doesn't have any idmapping applied and it will thus never work in
unpriviledged scenarios. As a container would be able to remove the
idmapping of the mount it has been given. That should be avoided.
Instead, we add open_tree_attr() which works just like open_tree() but
takes an optional struct mount_attr parameter. This is useful beyond
idmappings as it fills a gap where a mount never exists in userspace
without the necessary mount properties applied.
This is particularly useful for mount options such as
MOUNT_ATTR_{RDONLY,NOSUID,NODEV,NOEXEC}.
To create a new idmapped mount the following works:
// Create a first idmapped mount
struct mount_attr attr = {
.attr_set = MOUNT_ATTR_IDMAP
.userns_fd = fd_userns
};
fd_tree = open_tree(-EBADF, "/", OPEN_TREE_CLONE, &attr, sizeof(attr));
move_mount(fd_tree, "", -EBADF, "/mnt", MOVE_MOUNT_F_EMPTY_PATH);
// Create a second idmapped mount from the first idmapped mount
attr.attr_set = MOUNT_ATTR_IDMAP;
attr.userns_fd = fd_userns2;
fd_tree2 = open_tree(-EBADF, "/mnt", OPEN_TREE_CLONE, &attr, sizeof(attr));
// Create a second non-idmapped mount from the first idmapped mount:
memset(&attr, 0, sizeof(attr));
attr.attr_clr = MOUNT_ATTR_IDMAP;
fd_tree2 = open_tree(-EBADF, "/mnt", OPEN_TREE_CLONE, &attr, sizeof(attr));
* patches from https://lore.kernel.org/r/20250128-work-mnt_idmap-update-v2-v1-0-c25feb0d2eb3@kernel.org:
fs: allow changing idmappings
fs: add kflags member to struct mount_kattr
fs: add open_tree_attr()
fs: add copy_mount_setattr() helper
fs: add vfs_open_tree() helper
Link: https://lore.kernel.org/r/20250128-work-mnt_idmap-update-v2-v1-0-c25feb0d2eb3@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add open_tree_attr() which allow to atomically create a detached mount
tree and set mount options on it. If OPEN_TREE_CLONE is used this will
allow the creation of a detached mount with a new set of mount options
without it ever being exposed to userspace without that set of mount
options applied.
Link: https://lore.kernel.org/r/20250128-work-mnt_idmap-update-v2-v1-3-c25feb0d2eb3@kernel.org
Reviewed-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some of the fields in the statmount() reply can be optional. If the
kernel has nothing to emit in that field, then it doesn't set the flag
in the reply. This presents a problem: There is currently no way to
know what mask flags the kernel supports since you can't always count on
them being in the reply.
Add a new STATMOUNT_SUPPORTED_MASK flag and field that the kernel can
set in the reply. Userland can use this to determine if the fields it
requires from the kernel are supported. This also gives us a way to
deprecate fields in the future, if that should become necessary.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20250206-statmount-v2-1-6ae70a21c2ab@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This adds the STATMOUNT_MNT_UIDMAP and STATMOUNT_MNT_GIDMAP options.
It allows the retrieval of idmappings via statmount().
Currently it isn't possible to figure out what idmappings are applied to
an idmapped mount. This information is often crucial. Before statmount()
the only realistic options for an interface like this would have been to
add it to /proc/<pid>/fdinfo/<nr> or to expose it in
/proc/<pid>/mountinfo. Both solution would have been pretty ugly and
would've shown information that is of strong interest to some
application but not all. statmount() is perfect for this.
The idmappings applied to an idmapped mount are shown relative to the
caller's user namespace. This is the most useful solution that doesn't
risk leaking information or confuse the caller.
For example, an idmapped mount might have been created with the
following idmappings:
mount --bind -o X-mount.idmap="0:10000:1000 2000:2000:1 3000:3000:1" /srv /opt
Listing the idmappings through statmount() in the same context shows:
mnt_id: 2147485088
mnt_parent_id: 2147484816
fs_type: btrfs
mnt_root: /srv
mnt_point: /opt
mnt_opts: ssd,discard=async,space_cache=v2,subvolid=5,subvol=/
mnt_uidmap[0]: 0 10000 1000
mnt_uidmap[1]: 2000 2000 1
mnt_uidmap[2]: 3000 3000 1
mnt_gidmap[0]: 0 10000 1000
mnt_gidmap[1]: 2000 2000 1
mnt_gidmap[2]: 3000 3000 1
But the idmappings might not always be resolvable in the caller's user
namespace. For example:
unshare --user --map-root
In this case statmount() will skip any mappings that fil to resolve in
the caller's idmapping:
mnt_id: 2147485087
mnt_parent_id: 2147484016
fs_type: btrfs
mnt_root: /srv
mnt_point: /opt
mnt_opts: ssd,discard=async,space_cache=v2,subvolid=5,subvol=/
The caller can differentiate between a mount not being idmapped and a
mount that is idmapped but where all mappings fail to resolve in the
caller's idmapping by check for the STATMOUNT_MNT_{G,U}IDMAP flag being
raised but the number of mappings in ->mnt_{g,u}idmap_num being zero.
Note that statmount() requires that the whole range must be resolvable
in the caller's user namespace. If a subrange fails to map it will still
list the map as not resolvable. This is a practical compromise to avoid
having to find which subranges are resovable and wich aren't.
Idmappings are listed as a string array with each mapping separated by
zero bytes. This allows to retrieve the idmappings and immediately use
them for writing to e.g., /proc/<pid>/{g,u}id_map and it also allow for
simple iteration like:
if (stmnt->mask & STATMOUNT_MNT_UIDMAP) {
const char *idmap = stmnt->str + stmnt->mnt_uidmap;
for (size_t idx = 0; idx < stmnt->mnt_uidmap_nr; idx++) {
printf("mnt_uidmap[%lu]: %s\n", idx, idmap);
idmap += strlen(idmap) + 1;
}
}
Link: https://lore.kernel.org/r/20250204-work-mnt_idmap-statmount-v2-2-007720f39f2e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add map_id_range_up() to verify that the full kernel id range can be
mapped up in a given idmapping. This will be used in follow-up patches.
Link: https://lore.kernel.org/r/20250204-work-mnt_idmap-statmount-v2-1-007720f39f2e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
drm_sched_init() has a great many parameters and upcoming new
functionality for the scheduler might add even more. Generally, the
great number of parameters reduces readability and has already caused
one missnaming, addressed in:
commit 6f1cacf4eba7 ("drm/nouveau: Improve variable name in
nouveau_sched_init()").
Introduce a new struct for the scheduler init parameters and port all
users.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthew Brost <matthew.brost@intel.com> # for Xe
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # for Panfrost and Panthor
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> # for Etnaviv
Reviewed-by: Frank Binns <frank.binns@imgtec.com> # for Imagination
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> # for Sched
Reviewed-by: Maíra Canal <mcanal@igalia.com> # for v3d
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> # for amdxdna
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211111422.21235-2-phasta@kernel.org
|
|
Add a new gpiod_multi_set_value_cansleep() helper function with fewer
parameters than gpiod_set_array_value_cansleep().
Calling gpiod_set_array_value_cansleep() can get quite verbose. In many
cases, the first arguments all come from the same struct gpio_descs, so
having a separate function where we can just pass that cuts down on the
boilerplate.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250210-gpio-set-array-helper-v3-1-d6a673674da8@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Ensure drm headers build, are self-contained, have header guards, and
have no kernel-doc warnings, when CONFIG_DRM_HEADER_TEST=y.
The mechanism follows similar patters used in i915, xe, and usr/include.
To cover include/drm, we need to recurse there using the top level
Kbuild and the new include/Kbuild files.
v4: check for CONFIG_WERROR in addition to CONFIG_DRM_WERROR
v3: adapt to upstream build changes
v2: make DRM_HEADER_TEST depend on DRM
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d8ad1c6d707f38a55987f616cb9650aef30b84e1.1737556766.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm_client_event.h uses bool without types.h, include it.
Fixes: bf17766f1083 ("drm/client: Move suspend/resume into DRM client callbacks")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/6c69cb005cc3a2b968b6c9675d0ba03173f6c574.1737556766.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This patch adds an ioctl to give a per-file priority hint to attach
REQ_PRIO.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Both definitions are unused. Last users have been removed with:
f3ba9d490d6e ("net: s6gmac: remove driver")
2bd229df5e2e ("net: phy: remove state PHY_FORCING")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/f8e7b8ed-a665-41ad-b0ce-cbfdb65262ef@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Consider that an EEE mode may not be broken but simply not supported
by the MAC, and rename function phy_set_eee_broken().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/30deb630-3f6b-4ffb-a1e6-a9736021f43a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This bitmap is used also if the MAC doesn't support an EEE mode.
So the mode isn't necessarily broken in the PHY. Therefore rename
the bitmap.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/6cd11422-dd67-4c87-a642-308de694af92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is already a macro DEFINE_WAIT_FUNC() to declare a wait_queue_entry
with a specified waking function. But there is not a counterpart for
initializing one wait_queue_entry with a specified waking function. So
introducing init_wait_func() for this, which also could be used in iocost
and rq-qos. Using default_wake_function() in rq_qos_wait() to wake up
waiters, which could remove ->task field from rq_qos_wait_data.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250208090416.38642-1-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The intel-lpmd tool [1], which uses the THERMAL_GENL_ATTR_CPU_CAPABILITY
attribute to receive HFI events from kernel space, encounters a
segmentation fault after commit 1773572863c4 ("thermal: netlink: Add the
commands and the events for the thresholds").
The issue arises because the THERMAL_GENL_ATTR_CPU_CAPABILITY raw value
was changed while intel_lpmd still uses the old value.
Although intel_lpmd can be updated to check the THERMAL_GENL_VERSION and
use the appropriate THERMAL_GENL_ATTR_CPU_CAPABILITY value, the commit
itself is questionable.
The commit introduced a new element in the middle of enum thermal_genl_attr,
which affects many existing attributes and introduces potential risks
and unnecessary maintenance burdens for userspace thermal netlink event
users.
Solve the issue by moving the newly introduced
THERMAL_GENL_ATTR_TZ_PREV_TEMP attribute to the end of the
enum thermal_genl_attr. This ensures that all existing thermal generic
netlink attributes remain unaffected.
Link: https://github.com/intel/intel-lpmd [1]
Fixes: 1773572863c4 ("thermal: netlink: Add the commands and the events for the thresholds")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20250208074907.5679-1-rui.zhang@intel.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a pwms property to the adi,ad4695 binding to specify an optional PWM
output connected to the CNV pin on the ADC.
Also add #trigger-source-cells property to allow the BUSY output to be
used as a SPI offload trigger source to indicate when a sample is ready
to be read.
Macros are added to adi,ad4695.h for the cell values to help with
readability since they are arbitrary values.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-13-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of an odd comment, cite the documentation, which says more clearly
what's going on with the programming flow on some of the Intel SoCs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add #include <linux/bits.h> to linux/spi/offload/types.h since this
file uses the BIT macro.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250210-spi-offload-extra-headers-v1-1-0f3356362254@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With some research in some obscure old QSDK, it was possible to find the
MASK of the last register there were still set with raw shift and
convert them to FIELD_PREP API.
This is only a cleanup and modernize the code a bit and doesn't make
any behaviour change.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Previous patch added a TCP_RTO_MAX_MS socket option
to tune a TCP socket max RTO value.
Many setups prefer to change a per netns sysctl.
This patch adds /proc/sys/net/ipv4/tcp_rto_max_ms
Its initial value is 120000 (120 seconds).
Keep in mind that a decrease of tcp_rto_max_ms
means shorter overall timeouts, unless tcp_retries2
sysctl is increased.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
