| Age | Commit message (Collapse) | Author |
|---|
|
Large alignment requests previously forced the buddy allocator to search by
alignment order, which often caused higher-order free blocks to be split even
when a suitably aligned smaller region already existed within them. This led
to excessive fragmentation, especially for workloads requesting small sizes
with large alignment constraints.
This change prioritizes the requested allocation size during the search and
uses an augmented RB-tree field (subtree_max_alignment) to efficiently locate
free blocks that satisfy both size and offset-alignment requirements. As a
result, the allocator can directly select an aligned sub-region without
splitting larger blocks unnecessarily.
A practical example is the VKCTS test
dEQP-VK.memory.allocation.basic.size_8KiB.reverse.count_4000, which repeatedly
allocates 8 KiB buffers with a 256 KiB alignment. Previously, such allocations
caused large blocks to be split aggressively, despite smaller aligned regions
being sufficient. With this change, those aligned regions are reused directly,
significantly reducing fragmentation.
This improvement is visible in the amdgpu VRAM buddy allocator state
(/sys/kernel/debug/dri/1/amdgpu_vram_mm). After the change, higher-order blocks
are preserved and the number of low-order fragments is substantially reduced.
Before:
order- 5 free: 1936 MiB, blocks: 15490
order- 4 free: 967 MiB, blocks: 15486
order- 3 free: 483 MiB, blocks: 15485
order- 2 free: 241 MiB, blocks: 15486
order- 1 free: 241 MiB, blocks: 30948
After:
order- 5 free: 493 MiB, blocks: 3941
order- 4 free: 246 MiB, blocks: 3943
order- 3 free: 123 MiB, blocks: 4101
order- 2 free: 61 MiB, blocks: 4101
order- 1 free: 61 MiB, blocks: 8018
By avoiding unnecessary splits, this change improves allocator efficiency and
helps maintain larger contiguous free regions under heavy offset-aligned
allocation workloads.
v2:(Matthew)
- Update augmented information along the path to the inserted node.
v3:
- Move the patch to gpu/buddy.c file.
v4:(Matthew)
- Use the helper instead of calling _ffs directly
- Remove gpu_buddy_block_order(block) >= order check and drop order
- Drop !node check as all callers handle this already
- Return larger than any other possible alignment for __ffs64(0)
- Replace __ffs with __ffs64
v5:(Matthew)
- Drop subtree_max_alignment initialization at gpu_block_alloc()
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260306060155.2114-1-Arunpravin.PaneerSelvam@amd.com
|
|
For current platforms(ACP6.3/ACP7.0/ACP7.1/ACP7.2), AMD SoundWire manager
doesn't have banked registers for data port programming on Manager's side.
Need to use fixed block offsets, hstart & hstop for manager ports.
Earlier amd manager driver has support for 12 MHz as a bus clock frequency
where frame rate is 48000 and number of bits is 500, frame shape as
50 x 10 with fixed block offset mapping based on port number.
Got a new requirement to support 6 MHz as a bus clock frequency.
For 6 MHz bus clock frequency amd manager driver needs to support two
different frame shapes i.e number of bits as 250 with frame rate as 48000
and frame shape as 125 x 2 and for the second combination number of bits as
500 where frame rate is 24000 and frame shape is 50 x 10.
Few SoundWire peripherals doesn't support 125 x 2 as a frame shape for
6 MHz bus clock frequency. They have explicit requirement for the frame
shape. In this scenario, amd manager driver needs to use 50 x 10 as a frame
shape where frame rate is 24000. Based on the platform and SoundWire
topology for 6Mhz support frame shape will be decided which is part of
SoundWire manager DisCo tables.
For current platforms, amd manager driver supports only two bus clock
frequencies(12 MHz & 6 MHz). Refactor bandwidth logic to support different
bus clock frequencies.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260226065638.1251771-3-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clients sometimes need to know whether the mailbox TX queue has room
before posting a new message. Rather than exposing internal queue state
through a struct field, provide a proper accessor function that returns
the number of available slots for a given channel.
This lets clients choose to back off when the queue is full instead of
hitting the -ENOBUFS error path and the misleading "Try increasing
MBOX_TX_QUEUE_LEN" warning.
Tested-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
Cross-subsystem Changes:
dma-buf:
- Prepare for compile-time concurrency analysis
Core Changes:
buddy:
- Improve assert testing
sched:
- Fix race condition in drm_sched_fini()
- Mark slow tests
Driver Changes:
bridge:
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus DT bindings
gma500:
- Use DRM client buffer for fbdev framebuffer
gud:
- Test for imported buffers with helper
imagination:
- Fix power domain handling
ivpu:
- Update boot API to v3.29.4
- Limit per-user number of doorbells and contexts
nouveau:
- Test for imported buffers with helper
panel:
- panel-edp: Fix timings for BOE NV140WUM-N64
panfrost:
- Test for imported buffers with helper
panthor:
- Test for imported buffers with helper
vc4:
- Test for imported buffers with helper
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260305081140.GA171266@linux.fritz.box
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.1-2026-03-04:
amdgpu:
- FAMS2 updates
- Refactor DC I2C
- Rework ttm handling to allow for multiple engines
- UserQ updates
- Ring reset improvements
- DC DCE 6.x cleanups
- DC support for NUTMEG and TRAVIS DP bridges
- Enable DC by default on CIK APUs
- Add DCN 4.2 support
- IPS fixes
- Overlay fixes for DCN4
- SDMA Limit updates
- Misc fixes
- RAS updates
- Register access callback rework
- GC 12.1 updates
amdkfd:
- Misc cleanups
UAPI:
- UserQ fence IOCTL parameter size fixes. The change is backwards compatible on LE, but not BE.
UserQs are still not considered stable and are disabled by default.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260304213233.1938311-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Added helpers to acquire and release the umem dmabuf revoke
lock. The intent is to avoid the need for drivers to peek
into the ib_umem_dmabuf internals to get the dma_resv_lock
and bring us one step closer to abstracting ib_umem_dmabuf
away from drivers in general.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260305170826.3803155-5-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Added an interface for importing a pinned but revocable dmabuf.
This interface can be used by drivers that are capable of revocation
so that they can import dmabufs from exporters that may require it,
such as VFIO.
This interface implements a two step process, where drivers will first
call ib_umem_dmabuf_get_pinned_revocable_and_lock() which will pin and
map the dmabuf (and provide a functional move_notify/invalidate_mappings
callback), but will return with the lock still held so that the
driver can then populate the callback via
ib_umem_dmabuf_set_revoke_locked() without races from concurrent
revocations. This scheme also allows for easier integration with drivers
that may not have actually allocated their internal MR objects at the time
of the get_pinned_revocable* call.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260305170826.3803155-4-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This patch supports application allocated memory for CQs.
The application allocates and manages the CQs directly. To support
this, the driver exports a new comp_mask to indicate direct control
of the CQ. When this comp_mask bit is set in the ureq, the driver
maps this application allocated CQ memory into hardware. As the
application manages this memory, the CQ depth ('cqe') passed by it
must be used as is and the driver shouldn't update it.
For CQs, ib_core supports pinning dmabuf based application memory,
specified through provider attributes. This umem is mananged by the
ib_core and is available in ib_cq. Register 'create_cq_user' devop
to process this umem. The driver also supports the legacy interface
that allocates umem internally.
Link: https://patch.msgid.link/r/20260302110036.36387-7-sriharsha.basavapatna@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Some applications may need multiple doorbells to support parallel
processing of threads that each operate on a group of resources.
The following uapi methods have been implemented in this patch.
- BNXT_RE_METHOD_DBR_ALLOC:
This will allow the appliation to create extra doorbell regions
and use the associated doorbell page index in CREATE_QP and
use the associated DB address while ringing the doorbell.
- BNXT_RE_METHOD_DBR_FREE:
Free the allocated doorbell region.
- BNXT_RE_METHOD_GET_DEFAULT_DBR:
Return the default doorbell page index and doorbell page address
associated with the ucontext.
Link: https://patch.msgid.link/r/20260302110036.36387-4-sriharsha.basavapatna@broadcom.com
Co-developed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This flag can be set by drivers once they have finished auditing and
implementing the full udata support on every udata operation.
My intention going forward is that driver authors proposing new udata uAPI
for their drivers must first do the work and set this flag.
If this flag is not set the userspace should not try to use udata based
uAPI newer than this commit, though on a case by case basis it may be OK
based on what checks historical kernels performed on the specific call.
Since bnxt_re is audited now, it is the first driver to set the flag.
Link: https://patch.msgid.link/r/13-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Write down how all of this is supposed to work using the new helpers.
Link: https://patch.msgid.link/r/7-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
If the driver doesn't yet support any request driver data it should check
that it is all zeroed. This is a common pattern, add a helper around
_ib_copy_validate_udata_in() to do this.
Link: https://patch.msgid.link/r/6-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Wrap the common copy_to_user() pattern used in drivers and enhance it
to zero pad as well. Include debug logging on failures.
Link: https://patch.msgid.link/r/5-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For structures with comp_mask also absorb the check of comp_mask valid
bits into the helper. This is slightly tricky because ~ might not fully
extend to 64 bits, the helper inserts an explicit type to ensure that ~
covers all bits.
Link: https://patch.msgid.link/r/4-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add a new function to consolidate the required compatibility pattern for
driver data of checking against a minimum size, and checking for unknown
trailing bytes to be zero into a function.
This new function uses the faster copy_struct_from_user() instead of
trying to directly check for zero.
Incorporate the common ibdev_dbg() logging directly into the error paths
of the helper.
Link: https://patch.msgid.link/r/3-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Get an ib_device out of a udata so it can be used for debug prints.
Link: https://patch.msgid.link/r/2-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add compiler context analysis annotations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260306101417.GT1282955@noisy.programming.kicks-ass.net
|
|
Add compiler context analysis annotations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121111213.851599178@infradead.org
|
|
Add compiler context analysis annotations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121111213.745353747@infradead.org
|
|
Useful for things like unlock fastpaths, which on success release the
lock.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260121111213.634625032@infradead.org
|
|
Instead of embedding a list_head in struct mutex, store a pointer to
the first waiter. The list of waiters remains a doubly linked list so
we can efficiently add to the tail of the list, remove from the front
(or middle) of the list.
Some of the list manipulation becomes more complicated, but it's a
reasonable tradeoff on the slow paths to shrink data structures which
embed a mutex like struct file.
Some of the debug checks have to be deleted because there's no equivalent
to checking them in the new scheme (eg an empty waiter->list now means
that it is the only waiter, not that the waiter is no longer on the list).
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260305195545.3707590-4-willy@infradead.org
|
|
Instead of embedding a list_head in struct semaphore, store a pointer to
the first waiter. The list of waiters remains a doubly linked list so
we can efficiently add to the tail of the list and remove from the front
(or middle) of the list.
Some of the list manipulation becomes more complicated, but it's a
reasonable tradeoff on the slow paths to shrink data structures
which embed a semaphore.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260305195545.3707590-3-willy@infradead.org
|
|
Instead of embedding a list_head in struct rw_semaphore, store a pointer
to the first waiter. The list of waiters remains a doubly linked list
so we can efficiently add to the tail of the list, remove from the front
(or middle) of the list.
Some of the list manipulation becomes more complicated, but it's a
reasonable tradeoff on the slow paths to shrink some core data structures
like struct inode.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260305195545.3707590-2-willy@infradead.org
|
|
Correct or add the missing function parameter kernel-doc comments
to avoid warnings:
Warning: include/asm-generic/futex.h:38 function parameter 'op' not
described in 'futex_atomic_op_inuser_local'
Warning: include/asm-generic/futex.h:38 function parameter 'oparg' not
described in 'futex_atomic_op_inuser_local'
Warning: include/asm-generic/futex.h:38 function parameter 'oval' not
described in 'futex_atomic_op_inuser_local'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260304005008.409858-1-rdunlap@infradead.org
|
|
Saves two function calls, and one stac/clac pair.
stac/clac is rather expensive on older cpus like Zen 2.
A synthetic network stress test gives a ~1.5% increase of pps
on AMD Zen 2.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a new structure for the intmask register e.g. MC_INTMASK_0 and
it's mask value. Add an array of these new structures to prepare for
supporting multiple intmask registers. This is done in preparation for
adding support for Tegra264 which supports multiple intmask registers.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-6-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Introduce new SoC specific fields in tegra_mc_soc struct for high
address mask and error status type mask because Tegra264 has different
values for these than the existing devices. Error status registers
e.g. MC_ERR_STATUS_0 has few bits which indicate the type of the
error. In order to obtain such type of error from error status
register, we use error status type mask. Similarly, these error status
registers have bits which indicate the higher address bits of the
address responsible for mc error. In order to obtain such higher
address, we use high address mask. Make this change to prepare for
adding MC interrupt support for Tegra264.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-5-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add support to handle multiple MC interrupts lines, as supported by
Tegra264. Turn the single IRQ handler callback into a counted array to
allow specifying a separate handler for each interrupt. Move IRQ
handlers into tegra_mc_soc struct, so as to specify SoC specific
values.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-4-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Group MC error related registers into a struct as they could have SoC
specific values. Tegra264 has different register offsets than the
existing devices and so in order to add support for Tegra264 we need to
first make this change.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-2-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fix from Danilo Krummrich:
- Revert "driver core: enforce device_lock for driver_match_device()":
When a device is already present in the system and a driver is
registered on the same bus, we iterate over all devices registered on
this bus to see if one of them matches. If we come across an already
bound one where the corresponding driver crashed while holding the
device lock (e.g. in probe()) we can't make any progress anymore.
Thus, revert and clarify that an implementer of struct bus_type must
not expect match() to be called with the device lock held.
* tag 'driver-core-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Revert "driver core: enforce device_lock for driver_match_device()"
|
|
The UniPro stack manages to repair many potential Link problems without the
need to notify the Application Layer. Repair mechanisms of the stack
include L2 re-transmission and successful handling of PA_INIT.req.
Nevertheless, any successful repair sequence requires Link bandwidth that
is no longer vailable for the Application. Therefore, it may be useful for
an Application to understand how often such repair attempts are made.
The DME implements Quality of Service monitoring using a simple counting
scheme, counting error events and comparing them against the number of
correctly received or transmitted bytes. When the error counter exceeds a
programmed threshold before the byte counter overflows, a DME_QoS.ind is
issued to the Application and both counters are reset. When the byte
counter overflows before the error counter has reached the programmed
threshold, both counters are reset without triggering a DME_QoS.ind.
The DME provides Link quality monitoring for the following purposes:
1. Detection of re-occurring repaired fatal error conditions on the Link
(PA_INIT loop). This kind of detection is useful if capabilities
exchanged between local and peer permit a potential operation at a
higher M-PHY Gear, but the physical interconnect between local and peer
Device does not, or, after Line quality degradation, no longer satisfies
channel characteristics.
2. Detection of degraded inbound or outbound Link quality, to allow an
Application to issue an ADAPT sequence for a Link running in HS-G4 or
higher HS Gears. This kind of detection is used to monitor a slowly
degrading Link quality, e.g., one being affected by temperature and
voltage variations, against the expected M-PHY bit error rate.
Userspace can configure and enable UniPro QoS via UniPro QoS Attributes
(via UFS BSG) and get notified by dme_qos_notification without polling
UniPro QoS Status attribute. The dme_qos_notification attribute is a
bitfield with the following bit assignments:
Bit Description
=== ======================================
0 DME QoS Monitor has been reset by host
1 QoS from TX is detected
2 QoS from RX is detected
3 QoS from PA_INIT is detected
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260305110856.959211-2-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previously, host_lock was used to prevent bit-set conflicts in async_scan,
but this approach introduced naked reads in some code paths.
Convert async_scan from a bitfield to a bool type to eliminate bit-level
conflicts entirely. Use __guarded_by(&scan_mutex) to indicate that the
async_scan variable is protected by scan_mutex.
Signed-off-by: Chaohai Chen <wdhh6@aliyun.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260305025125.3649517-1-wdhh6@aliyun.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a cleanup of arch/x86/kernel/head_64.S removing the pre-built page
tables for Xen guests
- a small comment update
- another cleanup for Xen PVH guests mode
- fix an issue with Xen PV-devices backed by driver domains
* tag 'for-linus-7.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: better handle backend crash
xenbus: add xenbus_device parameter to xenbus_read_driver_state()
x86/PVH: Use boot params to pass RSDP address in start_info page
x86/xen: update outdated comment
xen/acpi-processor: fix _CST detection using undersized evaluation buffer
x86/xen: Build identity mapping page tables dynamically for XENPV
|
|
SCX_ENQ_REENQ indicates that a task is being re-enqueued but doesn't tell the
BPF scheduler why. Add SCX_TASK_REENQ_REASON flags using bits 12-13 of
p->scx.flags to communicate the reason during ops.enqueue():
- NONE: Not being reenqueued
- KFUNC: Reenqueued by scx_bpf_dsq_reenq() and friends
More reasons will be added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Task states (NONE, INIT, READY, ENABLED) were defined in a separate enum with
unshifted values and then shifted when stored in scx_entity.flags. Simplify by
defining them as pre-shifted values directly in scx_ent_flags and removing the
separate scx_task_state enum. This removes the need for shifting when
reading/writing state values.
scx_get_task_state() now returns the masked flags value directly.
scx_set_task_state() accepts the pre-shifted state value. scx_dump_task()
shifts down for display to maintain readable output.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_bpf_dsq_reenq() currently only supports local DSQs. Extend it to support
user-defined DSQs by adding a deferred re-enqueue mechanism similar to the
local DSQ handling.
Add per-cpu deferred_reenq_user_node/flags to scx_dsq_pcpu and
deferred_reenq_users list to scx_rq. When scx_bpf_dsq_reenq() is called on a
user DSQ, the DSQ's per-cpu node is added to the current rq's deferred list.
process_deferred_reenq_users() then iterates the DSQ using the cursor helpers
and re-enqueues each task.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Factor out cursor-based DSQ iteration from bpf_iter_scx_dsq_next() into
nldsq_cursor_next_task() and the task-lost check from scx_dsq_move() into
nldsq_cursor_lost_task() to prepare for reuse.
As ->priv is only used to record dsq->seq for cursors, update
INIT_DSQ_LIST_CURSOR() to take the DSQ pointer and set ->priv from dsq->seq
so that users don't have to read it manually. Move scx_dsq_iter_flags enum
earlier so nldsq_cursor_next_task() can use SCX_DSQ_ITER_REV.
bypass_lb_cpu() now sets cursor.priv to dsq->seq but doesn't use it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Add per-CPU data structure to dispatch queues. Each DSQ now has a percpu
scx_dsq_pcpu which contains a back-pointer to the DSQ. This will be used by
future changes to implement per-CPU reenqueue tracking for user DSQs.
init_dsq() now allocates the percpu data and can fail, so it returns an
error code. All callers are updated to handle failures. exit_dsq() is added
to free the percpu data and is called from all DSQ cleanup paths.
In scx_bpf_create_dsq(), init_dsq() is called before rcu_read_lock() since
alloc_percpu() requires GFP_KERNEL context, and dsq->sched is set
afterwards.
v2: Fix err_free_pcpu to only exit_dsq() initialized bypass DSQs (Andrea
Righi).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Fix all kernel-doc warnings in ecc.h:
- use correct kernel-doc format
- add some Returns: sections
- fix spelling and parameter names
Fixes these warnings:
Warning: include/crypto/internal/ecc.h:82 function parameter 'nbytes' not
described in 'ecc_digits_from_bytes'
Warning: include/crypto/internal/ecc.h:82 function parameter 'out' not
described in 'ecc_digits_from_bytes'
Warning: include/crypto/internal/ecc.h:95 No description found for return
value of 'ecc_is_key_valid'
Warning: include/crypto/internal/ecc.h:110 No description found for return
value of 'ecc_gen_privkey'
Warning: include/crypto/internal/ecc.h:124 No description found for return
value of 'ecc_make_pub_key'
Warning: include/crypto/internal/ecc.h:143 No description found for return
value of 'crypto_ecdh_shared_secret'
Warning: include/crypto/internal/ecc.h:182 No description found for return
value of 'vli_is_zero'
Warning: include/crypto/internal/ecc.h:194 No description found for return
value of 'vli_cmp'
Warning: include/crypto/internal/ecc.h:209 function parameter 'right' not
described in 'vli_sub'
Warning: include/crypto/internal/ecc.h:271 expecting prototype for
ecc_aloc_point(). Prototype was for ecc_alloc_point() instead
Warning: include/crypto/internal/ecc.h:287 function parameter 'point' not
described in 'ecc_point_is_zero'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use correct function parameter names and add Returns: sections to
eliminate all kernel-doc warnings in des.h:
Warning: include/crypto/des.h:41 function parameter 'keylen' not
described in 'des_expand_key'
Warning: include/crypto/des.h:41 No description found for return value
of 'des_expand_key'
Warning: include/crypto/des.h:54 function parameter 'keylen' not
described in 'des3_ede_expand_key'
Warning: include/crypto/des.h:54 No description found for return value
of 'des3_ede_expand_key'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Correct kernel-doc:
- add the @extra function parameter
- add "_extra" to the mismatched function name
- spell the "cmpl" parameter correctly
to avoid these warnings:
Warning: include/crypto/acompress.h:251 function parameter 'extra' not
described in 'acomp_request_alloc_extra'
Warning: include/crypto/acompress.h:251 expecting prototype for
acomp_request_alloc(). Prototype was for acomp_request_alloc_extra()
instead
Warning: include/crypto/acompress.h:327 function parameter 'cmpl' not
described in 'acomp_request_set_callback'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The else-if and else branches in rht_key_get_hash() both compute a hash
using either params.hashfn or jhash, differing only in the source of
key_len (params.key_len vs ht->p.key_len). Merge the two branches into
one by using the ternary `params.key_len ?: ht->p.key_len` to select
the key length, removing the duplicated logic.
This also improves the performance of the else branch which previously
always used jhash and never fell through to jhash2. This branch is going
to be used by BPF resizable hashmap, which wraps rhashtable:
https://lore.kernel.org/bpf/20260205-rhash-v1-0-30dd6d63c462@meta.com/
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Split out .modinfo section from ELF_DETAILS macro, as that macro may
be used in other areas that expect to discard .modinfo, breaking
certain image layouts
- Adjust genksyms parser to handle optional attributes in certain
declarations, necessary after commit 07919126ecfc ("netfilter:
annotate NAT helper hook pointers with __rcu")
- Include resolve_btfids in external module build created by
scripts/package/install-extmod-build when it may be run on external
modules
- Avoid removing objtool binary with 'make clean', as it is required
for external module builds
* tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Leave objtool binary around with 'make clean'
kbuild: install-extmod-build: Package resolve_btfids if necessary
genksyms: Fix parsing a declarator with a preceding attribute
kbuild: Split .modinfo out from ELF_DETAILS
|
|
378e6523ebb1 ("net: bcmgenet: remove unused platform code") removed
the last user of phy_attach(). So remove this function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/8812176a-e319-4e9f-815d-99ea339df8b2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet_sk_diag_fill() populates r->idiag_timer with the following
precedence order:
1 - Retransmit timer.
4 - Probe0 timer.
2 - Keepalive timer.
This patch adds a new value, last in the list, if other timers
are not active.
5 - Delayed ACK timer.
A corresponding iproute2 patch will follow to replace "unknown"
with "delack":
ESTAB 10 0 [2002:a05:6830:1f86::]:12875 [2002:a05:6830:1f85::]:50438
timer:(unknown,003ms,0) ino:152178 sk:3004 cgroup:unreachable:189 <->
skmem:(r1344,rb12780520,t0,tb262144,f2752,w0,o250,bl0,d0) ts usec_ts
...
Also add the following enum in uapi/linux/inet_diag.h
as suggested by David Ahern.
enum {
IDIAG_TIMER_OFF,
IDIAG_TIMER_ON,
IDIAG_TIMER_KEEPALIVE,
IDIAG_TIMER_TIMEWAIT,
IDIAG_TIMER_PROBE0,
IDIAG_TIMER_DELACK,
};
Neal Cardwell suggested to test for ICSK_ACK_TIMER:
inet_csk_clear_xmit_timer() does not call sk_stop_timer()
because INET_CSK_CLEAR_TIMERS is unset.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260305114829.2163276-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu")
capped net->max_mtu to the device's hard_mtu in usbnet_probe(). While
this correctly prevents oversized packets on standard USB network
devices, it breaks the qmi_wwan driver.
qmi_wwan relies on userspace (e.g. ModemManager) setting a large MTU on
the wwan0 interface to configure rx_urb_size via usbnet_change_mtu().
QMI modems negotiate USB transfer sizes of 16,383 or 32,767 bytes, and
the USB receive buffers must be sized accordingly. With max_mtu capped
to hard_mtu (~1500 bytes), userspace can no longer raise the MTU, the
receive buffers remain small, and download speeds drop from >300 Mbps
to ~0.8 Mbps.
Introduce a FLAG_NOMAXMTU driver flag that allows individual usbnet
drivers to opt out of the max_mtu cap. Set this flag in qmi_wwan's
driver_info structures to restore the previous behavior for QMI devices,
while keeping the safety fix in place for all other usbnet drivers.
Fixes: c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/CAPh3n803k8JcBPV5qEzUB-oKzWkAs-D5CU7z=Vd_nLRCr5ZqQg@mail.gmail.com/
Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Tested-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://patch.msgid.link/20260304134338.1785002-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PCS and PHY masks are passed to the mdio bus layer as phy_mask
to prevent bus addresses between 0 and 31 inclusive being scanned,
and this is declared as u32. Also declare these as u32 in stmmac
for type consistency.
Since this is a u32, use BIT_U32() rather than BIT() to generate
values for these fields.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vy6AY-0000000BtxJ-3smT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
default_an_inband is declared as an unsigned int, but is set to true/
false and is assigned to phylink_config's member of the same name
which is a bool. Declare this also as a bool for consistency.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vy6AT-0000000BtxD-2qm7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a generic helper that tests if fbdev emulation is backed by
a specific GEM object. Not all drivers use client buffers (yet), hence
also test against the first GEM object in the fbdev framebuffer.
Convert amdgpu. The helper will also be useful for radeon.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
