| Age | Commit message (Collapse) | Author |
|---|
|
There are network cards that support receive buffers larger than 4K, and
that can be vastly beneficial for performance, and benchmarks for this
patch showed up to 30% CPU util improvement for 32K vs 4K buffers.
Allows zcrx users to specify the size in struct
io_uring_zcrx_ifq_reg::rx_buf_len. If set to zero, zcrx will use a
default value. zcrx will check and fail if the memory backing the area
can't be split into physically contiguous chunks of the required size.
It's more restrictive as it only needs dma addresses to be contig, but
that's beyond this series.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: kill duplicate netdev_queues.h include]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com> says:
On Qualcomm automotive SoC SA8255P, platform resource like clocks,
interconnect, resets, regulators and PHY are configured remotely by
firmware.
Logical power domain is used to abstract these resources in firmware
and SCMI power protocol is used to request resource operations by
using runtime PM framework APIs such as pm_runtime_get/put_sync to
invoke power_on/_off calls from kernel respectively.
Link: https://patch.msgid.link/20260113080046.284089-1-ram.dwivedi@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some UFS platforms only support a limited subset of power levels.
Currently, the sysfs interface allows users to set any PM level without
validating the minimum supported value. If an unsupported level is
selected, suspend may fail.
Introduce an pm_lvl_min field in the ufs_hba structure and use it to
clamp the PM level requested via sysfs so that only supported levels are
accepted. Platforms that require a minimum PM level can set this field
during probe.
Signed-off-by: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260113080046.284089-4-ram.dwivedi@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
slave->last_rx and slave->target_last_arp_rx[...] can be read and written
locklessly. Add READ_ONCE() and WRITE_ONCE() annotations.
syzbot reported:
BUG: KCSAN: data-race in bond_rcv_validate / bond_rcv_validate
write to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 1:
bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335
bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533
__netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039
__netif_receive_skb_one_core net/core/dev.c:6150 [inline]
__netif_receive_skb+0x59/0x270 net/core/dev.c:6265
netif_receive_skb_internal net/core/dev.c:6351 [inline]
netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410
...
write to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 0:
bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335
bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533
__netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039
__netif_receive_skb_one_core net/core/dev.c:6150 [inline]
__netif_receive_skb+0x59/0x270 net/core/dev.c:6265
netif_receive_skb_internal net/core/dev.c:6351 [inline]
netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410
br_netif_receive_skb net/bridge/br_input.c:30 [inline]
NF_HOOK include/linux/netfilter.h:318 [inline]
...
value changed: 0x0000000100005365 -> 0x0000000100005366
Fixes: f5b2b966f032 ("[PATCH] bonding: Validate probe replies in ARP monitor")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://patch.msgid.link/20260122162914.2299312-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in patches to support several patch series such as Soft Reserve
handling, type2 accelerator enabling, and LSA 2.1 labeling support.
Mainly addition of cxl_memdev_attach() to allow the memdev probe
to make a decision of proceed/fail depending success of CXL topology
enumeration.
dax/hmem, e820, resource: Defer Soft Reserved insertion until hmem is ready
cxl/mem: Introduce cxl_memdev_attach for CXL-dependent operation
cxl/mem: Drop @host argument to devm_cxl_add_memdev()
cxl/mem: Convert devm_cxl_add_memdev() to scope-based-cleanup
cxl/port: Arrange for always synchronous endpoint attach
cxl/mem: Arrange for always-synchronous memdev attach
cxl/mem: Fix devm_cxl_memdev_edac_release() confusion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- A set of selftest fixes for ublk
- Fix for a pid mismatch in ublk, comparing PIDs in different
namespaces if run inside a namespace
- Fix for a regression added in this release with polling, where the
nvme tcp connect code would spin forever
- Zoned device error path fix
- Tweak the blkzoned uapi additions from this kernel release, making
them more easily discoverable
- Fix for a regression in bcache with bio endio handling added in this
release
* tag 'block-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
bcache: use bio cloning for detached device requests
blk-mq: use BLK_POLL_ONESHOT for synchronous poll completion
selftests/ublk: fix garbage output in foreground mode
selftests/ublk: fix error handling for starting device
selftests/ublk: fix IO thread idle check
block: make the new blkzoned UAPI constants discoverable
ublk: fix ublksrv pid handling for pid namespaces
block: Fix an error path in disk_update_zone_resources()
|
|
I imagine (tm) that as the number of per-queue configuration
options grows some of them may conflict for certain drivers.
While the drivers can obviously do all the validation locally
doing so is fairly inconvenient as the config is fed to drivers
piecemeal via different ops (for different params and NIC-wide
vs per-queue).
Add a centralized callback for validating the queue config
in queue ops. The callback gets invoked before memory provider
is installed, and in the future should also be called when ring
params are modified.
The validation is done after each layer of configuration.
Since we can't fail MP un-binding we must make sure that
the config is valid both before and after MP overrides are
applied. This is moot for now since the set of MP and device
configs are disjoint. It will matter significantly in the future,
so adding it now so that we don't forget..
Link: https://patch.msgid.link/20260122005113.2476634-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We should follow the prepare/commit approach for queue configuration.
The qcfg struct should be added to dev->cfg rather than directly to
queue objects so that we can clone and discard the pending config
easily.
Remove the qcfg in struct netdev_rx_queue, and switch remaining callers
to netdev_queue_config(). netdev_queue_config() will construct the qcfg
on the fly based on device defaults and state of the queue.
ndo_default_qcfg becomes optional because having the callback itself
does not have any meaningful semantics to us.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260122005113.2476634-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We may choose to extend or reimplement the logic which renders
the per-queue config. The drivers should not poke directly into
the queue state. Add a helper for drivers to use when they want
to query the config for a specific queue.
Link: https://patch.msgid.link/20260122005113.2476634-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow configuring and dumping the new device option, and cache its value
into the geneve socket itself.
The new option is not tie to it any code yet.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/2295d4e4d1e919a3189425141bbc71c7850a2de0.1769011015.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GSO partial features for tunnels do not require any kind of support from
the underlying device: we can safely add them to the geneve UDP tunnel.
The only point of attention is the skb required features propagation in
the device xmit op: partial features must be stripped, except for
UDP_TUNNEL*.
Keep partial features disabled by default.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/d851ca8e928cf05d68310bcbaeaa5e9e0b01e058.1769011015.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some/most devices implementing gso_partial need to disable the GSO partial
features when the IP ID can't be mangled; to that extend each of them
implements something alike the following[1]:
if (skb->encapsulation && !(features & NETIF_F_TSO_MANGLEID))
features &= ~NETIF_F_TSO;
in the ndo_features_check() op, which leads to a bit of duplicate code.
Later patch in the series will implement GSO partial support for virtual
devices, and the current status quo will require more duplicate code and
a new indirect call in the TX path for them.
Introduce the mangleid_features mask, allowing the core to disable NIC
features based on/requiring MANGLEID, without any further intervention
from the driver.
The same functionality could be alternatively implemented adding a single
boolean flag to the struct net_device, but would require an additional
checks in ndo_features_check().
Also note that [1] is incorrect if the NIC additionally implements
NETIF_F_GSO_UDP_L4, mangleid_features transparently handle even such a
case.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5a7cdaeea40b0a29b88e525b6c942d73ed3b8ce7.1769011015.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TAS fallback can be invoked directly when queued spin locks are
disabled, and through the slow path when paravirt is enabled for queued
spin locks. In the latter case, the res_spin_lock macro will attempt the
fast path and already hold the entry when entering the slow path. This
will lead to creation of extraneous entries that are not released, which
may cause false positives for deadlock detection.
Fix this by always preceding invocation of the TAS fallback in every
case with the grabbing of the held lock entry, and add a comment to make
note of this.
Fixes: c9102a68c070 ("rqspinlock: Add a test-and-set fallback")
Reported-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tested-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260122115911.3668985-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For SEV-SNP, the host can optionally provide a certificate table to the
guest when it issues an attestation request to firmware (see GHCB 2.0
specification regarding "SNP Extended Guest Requests"). This certificate
table can then be used to verify the endorsement key used by firmware to
sign the attestation report.
While it is possible for guests to obtain the certificates through other
means, handling it via the host provides more flexibility in being able
to keep the certificate data in sync with the endorsement key throughout
host-side operations that might resulting in the endorsement key
changing.
In the case of KVM, userspace will be responsible for fetching the
certificate table and keeping it in sync with any modifications to the
endorsement key by other userspace management tools. Define a new
KVM_EXIT_SNP_REQ_CERTS event where userspace is provided with the GPA of
the buffer the guest has provided as part of the attestation request so
that userspace can write the certificate data into it while relying on
filesystem-based locking to keep the certificates up-to-date relative to
the endorsement keys installed/utilized by firmware at the time the
certificates are fetched.
[Melody: Update the documentation scheme about how file locking is
expected to happen.]
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Melody Wang <huibo.wang@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://patch.msgid.link/20260109231732.1160759-2-michael.roth@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull drm fixes from Dave Airlie:
"Probably a good thing you decided to do an rc8 in this round. Nothing
stands out, but xe/amdgpu and mediatek all have a bunch of fixes, and
then there are a few other single patches. Hopefully next week is
calmer for release.
xe:
- Disallow bind-queue sharing across multiple VMs
- Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
- Fix a missed page count update
- Fix a confused argument to alloc_workqueue()
- Kernel-doc fixes
- Disable a workaround on VFs
- Fix a job lock assert
- Update wedged.mode only after successful reset policy change
- Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
amdgpu:
- fix color pipeline string leak
- GC 12 fix
- Misc error path fixes
- DC analog fix
- SMU 6 fixes
- TLB flush fix
- DC idle optimization fix
amdkfd:
- GC 11 cooperative launch fix
imagination:
- sync wait for logtype update completion to ensure FW trace
is available
bridge/synopsis:
- Fix error paths in dw_dp_bind
nouveau:
- Add and implement missing DSB connector types, and improve
unknown connector handling
- Set missing atomic function ops
intel:
- place 3D lut at correct place in pipeline
- fix color pipeline string leak
vkms:
- fix color pipeline string leak
mediatek:
- Fix platform_get_irq() error checking
- HDMI DDC v2 driver fixes
- dpi: Find next bridge during probe
- mtk_gem: Partial refactor and use drm_gem_dma_object
- dt-bindings: Fix typo 'hardwares' to 'hardware'"
* tag 'drm-fixes-2026-01-23' of https://gitlab.freedesktop.org/drm/kernel: (38 commits)
Revert "drm/amd/display: pause the workload setting in dm"
drm/xe: Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
drm, drm/xe: Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
drm/i915/display: Fix color pipeline enum name leak
drm/vkms: Fix color pipeline enum name leak
drm/amd/display: Fix color pipeline enum name leak
drm/i915/color: Place 3D LUT after CSC in plane color pipeline
drm/nouveau/disp: Set drm_mode_config_funcs.atomic_(check|commit)
drm/nouveau: implement missing DCB connector types; gracefully handle unknown connectors
drm/nouveau: add missing DCB connector types
drm/amdgpu: fix type for wptr in ring backup
drm/amdgpu: Fix validating flush_gpu_tlb_pasid()
drm/amd/pm: Workaround SI powertune issue on Radeon 430 (v2)
drm/amd/pm: Don't clear SI SMC table when setting power limit
drm/amd/pm: Fix si_dpm mmCG_THERMAL_INT setting
drm/xe: Update wedged.mode only after successful reset policy change
drm/xe/migrate: fix job lock assert
drm/xe/uapi: disallow bind queue sharing
drm/amd/display: Only poll analog connectors
drm/amdgpu: fix error handling in ib_schedule()
...
|
|
On the embedded platform, certain critical data, such as IMU data, is
transmitted through UART. The tty_flip_buffer_push() interface in the TTY
layer uses system_dfl_wq to handle the flipping of the TTY buffer.
Although the unbound workqueue can create new threads on demand and wake
up the kworker thread on an idle CPU, it may be preempted by real-time
tasks or other high-prio tasks.
flush_to_ldisc() needs to wake up the relevant data handle thread. When
executing __wake_up_common_lock(), it calls spin_lock_irqsave(), which
does not disable preemption but disables migration in RT-Linux. This
prevents the kworker thread from being migrated to other cores by CPU's
balancing logic, resulting in long delays. The call trace is as follows:
__wake_up_common_lock
__wake_up
ep_poll_callback
__wake_up_common
__wake_up_common_lock
__wake_up
n_tty_receive_buf_common
n_tty_receive_buf2
tty_ldisc_receive_buf
tty_port_default_receive_buf
flush_to_ldisc
In our system, the processing interval for each frame of IMU data
transmitted via UART can experience significant jitter due to this issue.
Instead of the expected 10 to 15 ms frame processing interval, we see
spikes up to 30 to 35 ms. Moreover, in just one or two hours, there can
be 2 to 3 occurrences of such high jitter, which is quite frequent. This
jitter exceeds the software's tolerable limit of 20 ms.
Introduce flip_wq in tty_port which can be set by tty_port_link_wq() or as
default linked to default workqueue allocated when tty_register_driver().
The default workqueue is allocated with flag WQ_SYSFS, so that cpumask and
nice can be set dynamically. The execution timing of tty_port_link_wq() is
not clearly restricted. The newly added function tty_port_link_driver_wq()
checks whether the flip_wq of the tty_port has already been assigned when
linking the default tty_driver's workqueue to the port. After the user has
set a custom workqueue for a certain tty_port using tty_port_link_wq(), the
system will only use this custom workqueue, even if tty_driver does not
have %TTY_DRIVER_CUSTOM_WORKQUEUE flag.
Introduce %TTY_DRIVER_CUSTOM_WORKQUEUE flag meaning not to create the
default single tty_driver workqueue. Two reasons why need to introduce the
%TTY_DRIVER_CUSTOM_WORKQUEUE flag:
1. If the WQ_SYSFS parameter is enabled, workqueue_sysfs_register() will
fail when trying to create a workqueue with the same name. The pty is an
example of this; if both CONFIG_LEGACY_PTYS and CONFIG_UNIX98_PTYS are
enabled, the call to tty_register_driver() in unix98_pty_init() will fail.
2. Different tty ports may be used for different tasks, which may require
separate core binding control via workqueues. In this case, the workqueue
created by default in the tty driver is unnecessary. Enabling this flag
prevents the creation of this redundant workqueue.
After applying this patch, we can set the related UART TTY flip buffer
workqueue by sysfs. We set the cpumask to CPU cores associated with the
IMU tasks, and set the nice to -20. Testing has shown significant
improvement in the previously described issue, with almost no stuttering
occurring anymore.
Signed-off-by: Xin Zhao <jackzxcui1989@163.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251223034836.2625547-1-jackzxcui1989@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for HSIC USB mode, which can be set for second USB controller
and PHY on Tegra SoC along with already supported UTMI or ULPI.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260122151125.7367-3-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactor to directly use enum usb_phy_interface to determine the PHY mode.
This change is in preparation for adding support for HSIC mode.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260122151125.7367-2-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The port driver sets this bit for an alternate mode description to indicate
support for the mode selection feature. Once set, individual Alt Mode
drivers will no longer attempt to activate their respective modes within
their probe functions. This prevents race conditions and non-prioritized
activation.
The bit is not set by default. If left unset, the system retains the
current behavior where Alt Mode drivers manage their own activation logic.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-6-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mode selection process is controlled by the following API functions,
which allow to initiate and complete mode entry based on the priority of
each mode:
`typec_mode_selection_start` function compiles a priority list of supported
Alternate Modes.
`typec_altmode_state_update` function is invoked by the port driver to
communicate the current mode of the Type-C connector.
`typec_mode_selection_delete` function stops the currently running mode
selection process and releases all associated system resources.
`mode_selection_work_fn` task attempts to activate modes. The process stops
on success; otherwise, it proceeds to the next mode after a timeout or
error.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-5-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces a priority sysfs attribute to the USB Type-C
alternate mode port interface. This new attribute allows user-space to
configure the numeric priority of alternate modes managing their preferred
order of operation. If a new priority value conflicts with an existing
mode's priority, the priorities of the conflicting mode and all subsequent
modes are automatically incremented to ensure uniqueness.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-4-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This new field in the port properties dictates whether the Platform Policy
Manager (PPM) allows the OS Policy Manager (OPM) to change the currently
active, negotiated alternate mode.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260119131824.2529334-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce a linked list tracking all inode connectors for a superblock.
We will use this list when the superblock is getting shutdown to
properly clean up all the inode marks instead of relying on scanning all
inodes in the superblock which can get rather slow.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The trace_erofs_read_folio accesses inode information through folio,
but this method fails if the real inode is not associated with the
folio(such as in the upcoming page cache sharing case). Therefore,
we pass the real inode to it so that the inode information can be
printed out in that case.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull 'vfs-7.0.iomap' to allow iomap page cache users to set
`iomap_iter::private` for the upcoming page cache sharing support.
It also includes a patch to avoid triggering inline data reads for
the FIEMAP operation.
Signed-off-by: Gao Xiang <xiang@kernel.org>
|
|
Merge arm64/for-next/cpufeature in to resolve conflicts resulting from
the removal of CONFIG_PAN.
* arm64/for-next/cpufeature:
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
KVM: arm64: Add exit to userspace on {LD,ST}64B* outside of memslots
arm64: Unconditionally enable PAN support
arm64: Unconditionally enable LSE support
arm64: Add support for TSV110 Spectre-BHB mitigation
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add aes-gcm crypto API's for AMD/Xilinx Versal device.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add API to get SoC version and family info.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For better maintainability move crypto related API's to
new zynqmp-crypto.c file.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc7).
Conflicts:
drivers/net/ethernet/huawei/hinic3/hinic3_irq.c
b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM")
fb2bb2a1ebf7 ("hinic3: Fix netif_queue_set_napi queue_index input parameter error")
https://lore.kernel.org/fc0a7fdf08789a52653e8ad05281a0a849e79206.1768915707.git.zhuyikai1@h-partners.com
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/wifi7/hw.c
31707572108d ("wifi: ath12k: Fix wrong P2P device link id issue")
c26f294fef2a ("wifi: ath12k: Move ieee80211_ops callback to the arch specific module")
https://lore.kernel.org/20260114123751.6a208818@canb.auug.org.au
Adjacent changes:
drivers/net/wireless/ath/ath12k/mac.c
8b8d6ee53dfd ("wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel")
914c890d3b90 ("wifi: ath12k: Add framework for hardware specific ieee80211_ops registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The actual GMCH_CRTL lives in the host bridge aka. device 0,
but device 2 has a read-only mirror on i85x/i865+. Document
that fact.
Also remove the ancient tales about where the defines are used.
Those haven't been true in a long time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-20-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The PCI config space register defines in i915_drm.h are
a bit of a mess; Whitespace is all over the place, register
masks and values are defined in inconsistent ways.
Clean it up a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
INTEL_GMCH_CTRL and I830_GMCH_CTRL are the same register.
Get rid of the INTEL_GMCH_CTRL name.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a proper name for the "Input status register 0" IO address.
Currently we have some code that does reads using the aliasing
VGA_MSR_W define, making it unclear what register we're
actually reading.
v2: Remove stray '?'
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251209075549.14051-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
|
|
Add new feature UBLK_F_BATCH_IO which replaces the following two
per-io commands:
- UBLK_U_IO_FETCH_REQ
- UBLK_U_IO_COMMIT_AND_FETCH_REQ
with three per-queue batch io uring_cmd:
- UBLK_U_IO_PREP_IO_CMDS
- UBLK_U_IO_COMMIT_IO_CMDS
- UBLK_U_IO_FETCH_IO_CMDS
Then ublk can deliver batch io commands to ublk server in single
multishort uring_cmd, also allows to prepare & commit multiple
commands in batch style via single uring_cmd, communication cost is
reduced a lot.
This feature also doesn't limit task context any more for all supported
commands, so any allowed uring_cmd can be issued in any task context.
ublk server implementation becomes much easier.
Meantime load balance becomes much easier to support with this feature.
The command `UBLK_U_IO_FETCH_IO_CMDS` can be issued from multiple task
contexts, so each task can adjust this command's buffer length or number
of inflight commands for controlling how much load is handled by current
task.
Later, priority parameter will be added to command `UBLK_U_IO_FETCH_IO_CMDS`
for improving load balance support.
UBLK_U_IO_NEED_GET_DATA isn't supported in batch io yet, but it may be
enabled in future via its batch pair.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add UBLK_U_IO_FETCH_IO_CMDS command to enable efficient batch processing
of I/O requests. This multishot uring_cmd allows the ublk server to fetch
multiple I/O commands in a single operation, significantly reducing
submission overhead compared to individual FETCH_REQ* commands.
Key Design Features:
1. Multishot Operation: One UBLK_U_IO_FETCH_IO_CMDS can fetch many I/O
commands, with the batch size limited by the provided buffer length.
2. Dynamic Load Balancing: Multiple fetch commands can be submitted
simultaneously, but only one is active at any time. This enables
efficient load distribution across multiple server task contexts.
3. Implicit State Management: The implementation uses three key variables
to track state:
- evts_fifo: Queue of request tags awaiting processing
- fcmd_head: List of available fetch commands
- active_fcmd: Currently active fetch command (NULL = none active)
States are derived implicitly:
- IDLE: No fetch commands available
- READY: Fetch commands available, none active
- ACTIVE: One fetch command processing events
4. Lockless Reader Optimization: The active fetch command can read from
evts_fifo without locking (single reader guarantee), while writers
(ublk_queue_rq/ublk_queue_rqs) use evts_lock protection. The memory
barrier pairing plays key role for the single lockless reader
optimization.
Implementation Details:
- ublk_queue_rq() and ublk_queue_rqs() save request tags to evts_fifo
- __ublk_acquire_fcmd() selects an available fetch command when
events arrive and no command is currently active
- ublk_batch_dispatch() moves tags from evts_fifo to the fetch command's
buffer and posts completion via io_uring_mshot_cmd_post_cqe()
- State transitions are coordinated via evts_lock to maintain consistency
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Handle UBLK_U_IO_COMMIT_IO_CMDS by walking the uring_cmd fixed buffer:
- read each element into one temp buffer in batch style
- parse and apply each element for committing io result
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This commit implements the handling of the UBLK_U_IO_PREP_IO_CMDS command,
which allows userspace to prepare a batch of I/O requests.
The core of this change is the `ublk_walk_cmd_buf` function, which iterates
over the elements in the uring_cmd fixed buffer. For each element, it parses
the I/O details, finds the corresponding `ublk_io` structure, and prepares it
for future dispatch.
Add per-io lock for protecting concurrent delivery and committing.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add new command UBLK_U_IO_PREP_IO_CMDS, which is the batch version of
UBLK_IO_FETCH_REQ.
Add new command UBLK_U_IO_COMMIT_IO_CMDS, which is for committing io command
result only, still the batch version.
The new command header type is `struct ublk_batch_io`.
This patch doesn't actually implement these commands yet, just validates the
SQE fields.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- buddy: Fix free_trees memory leak, prevent a BUG_ON
- dma-buf: Start to introduce cgroup memory accounting in heaps, Remove
sysfs stats, add new tracepoints
- hdmi: Limit infoframes exposure to userspace based on driver
capabilities
- property: Account for property blobs in memcg
Driver Changes:
- atmel-hlcdc: Switch to drmm resources, Support nomodeset parameter,
various patches to use newish helpers and fix memory safety bugs
- hisilicon: Fix various DisplayPort related bugs
- imagination: Introduce hardware version checks
- renesas: Fix kernel panic on reboot
- rockchip: Fix RK3576 HPD interrupt handling, Improve RK3588 HPD
interrupt handling
- v3d: Convert to drm logging helpers
- bridge:
- Continuation of the refcounting effort
- new bridge: Algoltek AG6311
- panel:
- new panel: Anbernic RG-DS
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260122-antique-sexy-junglefowl-1bc5a8@houat
|
|
tcp_rate_check_app_limited() is used from tcp_sendmsg_locked()
fast path and from other callers.
Move it to tcp.c so that it can be inlined in tcp_sendmsg_locked().
Small increase of code, for better TCP performance.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 1/0 up/down: 87/0 (87)
Function old new delta
tcp_sendmsg_locked 4217 4304 +87
Total: Before=22566462, After=22566549, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260121095923.3134639-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function is called from one caller only, in TCP fast path.
Move it to tcp_input.c so that compiler can inline it.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 226/-300 (-74)
Function old new delta
tcp_ack 5405 5631 +226
__pfx_tcp_rate_gen 16 - -16
tcp_rate_gen 284 - -284
Total: Before=22566536, After=22566462, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260121095923.3134639-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The stmmac implementation used by NXP for the i.MX8MP SoC is subject to
errata ERR050694. According to this errata, when no preamble byte is
transferred before the SFD from the PHY to the MAC, the MAC will discard
the frame.
Setting the PHY_F_KEEP_PREAMBLE_BEFORE_SFD flag instructs PHYs that
support it to keep the preamble byte before the SFD. This ensures that
the MAC successfully receives frames.
As this is an issue in the MAC implementation, only enable the flag for
the i.MX8MP SoC where the errata applies but not for other SoCs using a
working stmmac implementation.
The exact wording of the errata ERR050694 from NXP:
The IEEE 802.3 standard states that, in MII/GMII modes, the byte
preceding the SFD (0xD5), SMD-S (0xE6,0x4C, 0x7F, or 0xB3), or SMD-C
(0x61, 0x52, 0x9E, or 0x2A) byte can be a non-PREAMBLE byte or there can
be no preceding preamble byte. The MAC receiver must successfully
receive a packet without any preamble(0x55) byte preceding the SFD,
SMD-S, or SMD-C byte.
However due to the defect, in configurations where frame preemption is
enabled, when preamble byte does not precede the SFD, SMD-S, or SMD-C
byte, the received packet is discarded by the MAC receiver. This is
because, the start-of-packet detection logic of the MAC receiver
incorrectly checks for a preamble byte.
NXP refers to IEEE 802.3 where in clause 35.2.3.2.2 Receive case (GMII)
they show two tables one where the preamble is preceding the SFD and one
where it is not. The text says:
The operation of 1000 Mb/s PHYs can result in shrinkage of the preamble
between transmission at the source GMII and reception at the destination
GMII. Table 35-3 depicts the case where no preamble bytes are conveyed
across the GMII. This case may not be possible with a specific PHY, but
illustrates the minimum preamble with which MAC shall be able to
operate. Table 35-4 depicts the case where the entire preamble is
conveyed across the GMII.
This workaround was tested on a Verdin iMX8MP by enforcing 10 MBit/s:
ethtool -s end0 speed 10
Without keeping the preamble, no packet were received. With keeping the
preamble, everything worked as expected.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260120203905.23805-4-eichest@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new flag, PHY_F_KEEP_PREAMBLE_BEFORE_SFD, to indicate that the PHY
shall not remove the preamble before the SFD if it supports it. MACs
that do not support receiving frames without a preamble can set this
flag.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260120203905.23805-2-eichest@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VF ID range of an SR-IOV device is [0, num_VFs - 1].
pci_ide_stream_alloc() mistakenly uses num_VFs to represent the last ID.
Fix that off by one error to stay in bounds of the range.
Fixes: 1e4d2ff3ae45 ("PCI/IDE: Add IDE establishment helpers")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://patch.msgid.link/20260114111455.550984-1-ming.li@zohomail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The proposed ABI failed to account for multiple host bridges with the same
stream name. The fix needs to namespace streams or otherwise link back to
the host bridge, but a change like that is too big for a fix. Given this
ABI never saw a released kernel, delete it for now and bring it back later
with this issue addressed.
Reported-by: Xu Yilun <yilun.xu@linux.intel.com>
Reported-by: Yi Lai <yi1.lai@intel.com>
Closes: http://lore.kernel.org/20251223085601.2607455-1-yilun.xu@linux.intel.com
Link: http://patch.msgid.link/6972c872acbb9_1d3310035@dwillia2-mobl4.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Outside of SQPOLL, normally SQ entries are consumed by the time the
submission syscall returns. For those cases we don't need a circular
buffer and the head/tail tracking, instead the kernel can assume that
entries always start from the beginning of the SQ at index 0. This patch
introduces a setup flag doing exactly that. It's a simpler and helps
to keeps SQEs hot in cache.
The feature is optional and enabled by setting IORING_SETUP_SQ_REWIND.
The flag is rejected if passed together with SQPOLL as it'd require
waiting for SQ before each submission. It also requires
IORING_SETUP_NO_SQARRAY, which can be supported but it's unlikely there
will be users, so leave more space for future optimisations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The AER service driver and aer_event tracing currently log 'PCIe Bus Type'
for all errors. Update the driver and aer_event tracing to log 'CXL Bus
Type' for CXL device errors.
This requires that AER can identify and distinguish between PCIe errors and
CXL errors.
Introduce boolean 'is_cxl' to 'struct aer_err_info'. Add assignment in
aer_get_device_error_info() and pci_print_aer().
Update the aer_event trace routine to accept a bus type string parameter.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260114182055.46029-15-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Internal PCIe errors are not enabled by default during initialization
because their behavior is too device-specific and there is no standard way
to reason about them. However, for CXL an internal error is the standard
mechanism for conveying CXL protocol errors.
Export pci_aer_unmask_internal_errors() for CXL, but make it clear that
they are only meant for CXL and the status quo for leaving them masked for
PCIe in general remains.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260114182055.46029-10-terry.bowman@amd.com
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
