| Age | Commit message (Collapse) | Author |
|---|
|
There is a spelling mistake of 'notifer' in the comment which
should be 'notifier'.
Link: https://lkml.kernel.org/r/C6633C66376C709A+20250722073431.21983-7-wangyuli@uniontech.com
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When booting a new kernel with kexec_file, the kernel picks a target
location that the kernel should live at, then allocates random pages,
checks whether any of those patches magically happens to coincide with a
target address range and if so, uses them for that range.
For every page allocated this way, it then creates a page list that the
relocation code - code that executes while all CPUs are off and we are
just about to jump into the new kernel - copies to their final memory
location. We can not put them there before, because chances are pretty
good that at least some page in the target range is already in use by the
currently running Linux environment. Copying is happening from a single
CPU at RAM rate, which takes around 4-50 ms per 100 MiB.
All of this is inefficient and error prone.
To successfully kexec, we need to quiesce all devices of the outgoing
kernel so they don't scribble over the new kernel's memory. We have seen
cases where that does not happen properly (*cough* GIC *cough*) and hence
the new kernel was corrupted. This started a month long journey to root
cause failing kexecs to eventually see memory corruption, because the new
kernel was corrupted severely enough that it could not emit output to tell
us about the fact that it was corrupted. By allocating memory for the
next kernel from a memory range that is guaranteed scribbling free, we can
boot the next kernel up to a point where it is at least able to detect
corruption and maybe even stop it before it becomes severe. This
increases the chance for successful kexecs.
Since kexec got introduced, Linux has gained the CMA framework which can
perform physically contiguous memory mappings, while keeping that memory
available for movable memory when it is not needed for contiguous
allocations. The default CMA allocator is for DMA allocations.
This patch adds logic to the kexec file loader to attempt to place the
target payload at a location allocated from CMA. If successful, it uses
that memory range directly instead of creating copy instructions during
the hot phase. To ensure that there is a safety net in case anything goes
wrong with the CMA allocation, it also adds a flag for user space to force
disable CMA allocations.
Using CMA allocations has two advantages:
1) Faster by 4-50 ms per 100 MiB. There is no more need to copy in the
hot phase.
2) More robust. Even if by accident some page is still in use for DMA,
the new kernel image will be safe from that access because it resides
in a memory region that is considered allocated in the old kernel and
has a chance to reinitialize that component.
Link: https://lkml.kernel.org/r/20250610085327.51817-1-graf@amazon.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Zhongkun He <hezhongkun.hzk@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
xxh32_digest() and xxh32_update() were added in 2017 in the original
xxhash commit, but have remained unused.
Remove them.
Link: https://lkml.kernel.org/r/20250716133245.243363-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Gilbert <linux@treblig.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This update replaces the remaining tasklet usage in the FireWire
subsystem with workqueue for asynchronous packet transmission. With
this change, tasklets are now fully eliminated from the subsystem.
Asynchronous packet transmission is used for serial bus topology
management as well as for the operation of the SBP-2 protocol driver
(firewire-sbp2). To ensure reliability during low-memory conditions,
the associated workqueue is created with the WQ_MEM_RECLAIM flag,
allowing it to participate in memory reclaim paths. Other attributes
are aligned with those used for isochronous packet handling, which was
migrated to workqueues in v6.12.
The workqueues are sleepable and support preemptible work items,
making them more suitable for real-time workloads that benefit from
timely task preemption at the system level.
There remains an issue where 'schedule()' may be called within an RCU
read-side critical section, due to a direct replacement of
'tasklet_disable_in_atomic()' with 'disable_work_sync()'. A proposed
fix for this has been posted[1], and is currently under review and
testing. It is expected to be sent upstream later"
Link: https://lore.kernel.org/lkml/20250728015125.17825-1-o-takashi@sakamocchi.jp/ [1]
* tag 'firewire-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: reduce the size of common context structure by extracting members into AT structure
firewire: core: minor code refactoring to localize table of gap count
firewire: ohci: use workqueue to handle events of AT request/response contexts
firewire: ohci: use workqueue to handle events of AR request/response contexts
firewire: core: allocate workqueue for AR/AT request/response contexts
firewire: core: use from_work() macro to expand parent structure of work_struct
firewire: ohci: use from_work() macro to expand parent structure of work_struct
firewire: ohci: correct code comments about bus_reset tasklet
|
|
Allow syscall programs to call non-recur helpers too since syscall bpf
programs runs in process context through bpf syscall, BPF_PROG_TEST_RUN,
and cannot run recursively.
bpf_task_storage_{get,set} have "_recur" versions that call trylock
instead of taking the lock directly to avoid deadlock when called by
bpf programs that run recursively. Currently, only bpf_lsm, bpf_iter,
struct_ops without private stack are allow to call the non-recur helpers
since they cannot be recursively called in another bpf program.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20250730185903.3574598-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix kCFI failures in JITed BPF code on arm64 (Sami Tolvanen, Puranjay
Mohan, Mark Rutland, Maxwell Bland)
- Disallow tail calls between BPF programs that use different cgroup
local storage maps to prevent out-of-bounds access (Daniel Borkmann)
- Fix unaligned access in flow_dissector and netfilter BPF programs
(Paul Chaignon)
- Avoid possible use of uninitialized mod_len in libbpf (Achill
Gilgenast)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test for unaligned flow_dissector ctx access
bpf: Improve ctx access verifier error message
bpf: Check netfilter ctx accesses are aligned
bpf: Check flow_dissector ctx accesses are aligned
arm64/cfi,bpf: Support kCFI + BPF on arm64
cfi: Move BPF CFI types and helpers to generic code
cfi: add C CFI type macro
libbpf: Avoid possible use of uninitialized mod_len
bpf: Fix oob access in cgroup local storage
bpf: Move cgroup iterator helpers to bpf.h
bpf: Move bpf map owner out of common struct
bpf: Add cookie object to bpf maps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The most significant changes in this pull request is the series that
introduces ACQUIRE() and ACQUIRE_ERR() macros to replace conditional
locking and ease the pain points of scoped_cond_guard().
The series also includes follow on changes that refactor the CXL
sub-system to utilize the new macros.
Detail summary:
- Add documentation template for CXL conventions to document CXL
platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform
enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address
availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and
improve readability
- Add return for the dummy version of cxl_decoder_detach() without
CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix"
* tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (28 commits)
Documentation/ABI/testing/debugfs-cxl: Add 'cxl' to clear_poison path
cxl/region: Fix an ERR_PTR() vs NULL bug
cxl/events: Trace Memory Sparing Event Record
cxl/events: Add extra validity checks for CVME count in DRAM Event Record
cxl/events: Add extra validity checks for corrected memory error count in General Media Event Record
cxl/events: Update Common Event Record to CXL spec rev 3.2
cxl: Fix -Werror=return-type in cxl_decoder_detach()
cleanup: Fix documentation build error for ACQUIRE updates
cxl: Convert to ACQUIRE() for conditional rwsem locking
cxl/region: Consolidate cxl_decoder_kill_region() and cxl_region_detach()
cxl/region: Move ready-to-probe state check to a helper
cxl/region: Split commit_store() into __commit() and queue_reset() helpers
cxl/decoder: Drop pointless locking
cxl/decoder: Move decoder register programming to a helper
cxl/mbox: Convert poison list mutex to ACQUIRE()
cleanup: Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
cxl: Remove core/acpi.c and cxl core dependency on ACPI
cxl/core: Using cxl_resource_contains_addr() to check address availability
cxl/edac: Fix wrong dpa checking for PPR operation
cxl/core: Introduce a new helper cxl_resource_contains_addr()
...
|
|
In ip_output() skb->dev is updated from the skb_dst(skb)->dev
this can become invalid when the interface is unregistered and freed,
Introduced new skb_dst_dev_rcu() function to be used instead of
skb_dst_dev() within rcu_locks in ip_output.This will ensure that
all the skb's associated with the dev being deregistered will
be transnmitted out first, before freeing the dev.
Given that ip_output() is called within an rcu_read_lock()
critical section or from a bottom-half context, it is safe to introduce
an RCU read-side critical section within it.
Multiple panic call stacks were observed when UL traffic was run
in concurrency with device deregistration from different functions,
pasting one sample for reference.
[496733.627565][T13385] Call trace:
[496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0
[496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498
[496733.627595][T13385] ip_finish_output+0xa4/0xf4
[496733.627605][T13385] ip_output+0x100/0x1a0
[496733.627613][T13385] ip_send_skb+0x68/0x100
[496733.627618][T13385] udp_send_skb+0x1c4/0x384
[496733.627625][T13385] udp_sendmsg+0x7b0/0x898
[496733.627631][T13385] inet_sendmsg+0x5c/0x7c
[496733.627639][T13385] __sys_sendto+0x174/0x1e4
[496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c
[496733.627653][T13385] invoke_syscall+0x58/0x11c
[496733.627662][T13385] el0_svc_common+0x88/0xf4
[496733.627669][T13385] do_el0_svc+0x2c/0xb0
[496733.627676][T13385] el0_svc+0x2c/0xa4
[496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4
[496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8
Changes in v3:
- Replaced WARN_ON() with WARN_ON_ONCE(), as suggested by Willem de Bruijn.
- Dropped legacy lines mistakenly pulled in from an outdated branch.
Changes in v2:
- Addressed review comments from Eric Dumazet
- Used READ_ONCE() to prevent potential load/store tearing
- Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output
Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending a packet with virtio_net_hdr to tun device, if the gso_type
in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr
size, below crash may happen.
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:4572!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:skb_pull_rcsum+0x8e/0xa0
Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000
RSP: 0018:ffffc900001fba38 EFLAGS: 00000297
RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948
RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062
RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001
R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000
R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900
FS: 000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0
Call Trace:
<TASK>
udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445
udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475
udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626
__udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690
ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233
ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579
ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636
ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670
__netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067
netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210
napi_complete_done+0x78/0x180 net/core/dev.c:6580
tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909
tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984
vfs_write+0x300/0x420 fs/read_write.c:593
ksys_write+0x60/0xd0 fs/read_write.c:686
do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63
</TASK>
To trigger gso segment in udp_queue_rcv_skb(), we should also set option
UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv
hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try
to pull udphdr, but the skb size has been segmented to gso size, which
leads to this crash.
Previous commit cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
introduces segmentation in UDP receive path only for GRO, which was never
intended to be used for UFO, so drop UFO packets in udp_rcv_segment().
Link: https://lore.kernel.org/netdev/20250724083005.3918375-1-wangliang74@huawei.com/
Link: https://lore.kernel.org/netdev/20250729123907.3318425-1-wangliang74@huawei.com/
Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250730101458.3470788-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot was able to craft a packet with very long IPv6 extension headers
leading to an overflow of skb->transport_header.
This 16bit field has a limited range.
Add skb_reset_transport_header_careful() helper and use it
from ipv6_gso_segment()
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Modules linked in:
CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Call Trace:
<TASK>
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
__skb_gso_segment+0x342/0x510 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950
validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000
sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329
__dev_xmit_skb net/core/dev.c:4102 [inline]
__dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679
Fixes: d1da932ed4ec ("ipv6: Separate ipv6 offload support")
Reported-by: syzbot+af43e647fd835acc02df@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/688a1a05.050a0220.5d226.0008.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250730131738.3385939-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull virtio updates from Michael Tsirkin:
- vhost can now support legacy threading if enabled in Kconfig
- vsock memory allocation strategies for large buffers have been
improved, reducing pressure on kmalloc
- vhost now supports the in-order feature. guest bits missed the merge
window.
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits)
vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers
vsock/virtio: Rename virtio_vsock_skb_rx_put()
vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers
vsock/virtio: Move SKB allocation lower-bound check to callers
vsock/virtio: Rename virtio_vsock_alloc_skb()
vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page
vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put()
vsock/virtio: Validate length in packet header before skb_put()
vhost/vsock: Avoid allocating arbitrarily-sized SKBs
vhost_net: basic in_order support
vhost: basic in order support
vhost: fail early when __vhost_add_used() fails
vhost: Reintroduce kthread API and add mode selection
vdpa: Fix IDR memory leak in VDUSE module exit
vdpa/mlx5: Fix release of uninitialized resources on error path
vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit
virtio: virtio_dma_buf: fix missing parameter documentation
vhost: Fix typos
vhost: vringh: Remove unused functions
vhost: vringh: Remove unused iotlb functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
|
Some calls to the tracing ring buffer can happen when the ring buffer is
already being written to by the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for
these functions so that their use cases can be simplified and not need to
use goto for the release.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250801203857.710501021@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition
- Various improvements and fixes
* tag 'linux-watchdog-6.17-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition
watchdog: dw_wdt: Fix default timeout
watchdog: Don't use "proxy" headers
watchdog: it87_wdt: Don't use "proxy" headers
watchdog: renesas_wdt: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
watchdog: iTCO_wdt: Report error if timeout configuration fails
watchdog: rti_wdt: Use of_reserved_mem_region_to_resource() for "memory-region"
dt-bindings: watchdog: nxp,pnx4008-wdt: allow clocks property
watchdog: ziirave_wdt: check record length in ziirave_firm_verify()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support, M31
eUSB2 PHY driver
- Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support
- Renesas RZ/V2N usb2-phy support
Updates:
- Bulk Yaml binding conversion By Rob H (too many to be listed)
- cadence: Sierra PCIe, USB PHY multilink configuration support
- Qualcomm refactoring of UFS PHY reset and UFS driver support for
phy calibrate API"
* tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (74 commits)
phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence
dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema
dt-bindings: phy: Convert ti,da830-usb-phy to DT schema
dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example
dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties
phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870
phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2
phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence
dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHY
dt-bindings: usb: qcom,snps-dwc3: Add Milos compatible
phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal
phy: rockchip-pcie: Enable all four lanes if required
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615
phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750
phy: qcom: m31-eusb2: drop registration printk
phy: qcom: m31-eusb2: fix match data santity check
phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P
phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers
dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values
phy: mediatek: tphy: Cleanup and document slew calibration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and driver updates:
- Core: handling of nesting irqs to outside the lock, stream
parameters handing on port prep failures.
- AMD driver support for ACP 7.2 platforms and improved handing of
slave alerts and resume sequences
- Qualcomm updating driver debug spew
- Intel BPT message length limitations, rt721 codec as wake capable
etc"
* tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Add support for acp7.2 platform
soundwire: stream: restore params when prepare ports fail
soundwire: debugfs: move debug statement outside of error handling
soundwire: amd: add check for status update registers
soundwire: intel_auxdevice: add rt721 codec to wake_capable_list
soundwire: Correct some property names
soundwire: update Intel BPT message length limitation
soundwire: intel_ace2.x: Use str_read_write() helper
soundwire: amd: cancel pending slave status handling workqueue during remove sequence
soundwire: amd: serialize amd manager resume sequence during pm_prepare
soundwire: qcom: demote probe registration printk
ASoC: cs42l43: Remove unnecessary work functions
soundwire: Move handle_nested_irq outside of sdw_dev_lock
MAINTAINERS: Remove Sanyog Kale as reviewer on SoundWire
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen
in two different locations has lead to various issues and
inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for
this single user.
It's been over 10 years. Tooling and scripts should start replacing
the debugfs location with the tracefs one. The reason tracefs was
created in the first place was to allow access to the tracing
facilities without the need to configure debugfs into the kernel.
Using tracefs should now be more robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED which is
default y, so that the kernel is still built with the automount. This
config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the
following printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number
of events within an event system. Freeing them from softirq context
can potentially cause undesired latency. Use the RCU workqueue to
free them instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time
ago with the idea of "making them visible", but that's not what
memory barriers are for. They are to synchronize access between
different variables. There was no synchronization here making them
pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y
and PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with
the following:
field:const char * filename; offset:24; size:8; signed:0;
Turns into:
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another
probe was enabled (kprobe, fprobe, uprobe, etc). The eprobes had no
config option of their own. Add one as they should be a separate
entity.
It's default y to keep with the old kernels but still has
dependencies on TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to
describe them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment
above pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling
of trace events was first introduced. But there was a bug with this
approach as it only worked for a single instance. When multiple users
required soft disabling and disabling the code was changed to have a
ref count. The SOFT_MODE flag is now set iff the ref count is non
zero. This is redundant and just reading the ref count is good
enough.
- Fix typo in comment
* tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add documentation about eprobes
tracing: Have eprobes have their own config option
tracing: Remove "__attribute__()" from the type field of event format
tracing: Deprecate auto-mounting tracefs in debugfs
tracing: Fix comment in trace_module_remove_events()
tracing: Remove EVENT_FILE_FL_SOFT_MODE flag
tracing: Remove pointless memory barriers
tracing/sched: Remove obsolete comment on suffixes
kernel: trace: preemptirq_delay_test: use offstack cpu mask
tracing: Use queue_rcu_work() to free filters
tracing: Replace opencoded cpumask_next_wrap() in move_to_next_cpu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull initial deferred unwind infrastructure from Steven Rostedt:
"This is the core infrastructure for the deferred unwinder that is
required for sframes[1]. Several other patch series are based on this
work although those patch series are not dependent on each other. In
order to simplify the development, having this core series upstream
will allow the other series to be worked on in parallel. The other
series are:
- The two patches to implement x86 support [2] [3]
- The s390 work [4]
- The perf work [5]
- The ftrace work [6]
- The sframe work [7]
And more is on the way.
The core infrastructure adds the following in kernel APIs:
- int unwind_user_faultable(struct unwind_stacktrace *trace);
Performs a user space stack trace that may fault user pages in.
- int unwind_deferred_init(struct unwind_work *work, unwind_callback_t func);
Allows a tracer to register with the unwind deferred
infrastructure.
- int unwind_deferred_request(struct unwind_work *work, u64 *cookie);
Used when a tracer request a deferred trace. Can be called from
interrupt or NMI context.
- void unwind_deferred_cancel(struct unwind_work *work);
Called by a tracer to unregister from the deferred unwind
infrastructure.
- void unwind_deferred_task_exit(struct task_struct *task);
Called by task exit code to flush any pending unwind requests.
- void unwind_task_init(struct task_struct *task);
Called by do_fork() to initialize the task struct for the
deferred unwinder.
- void unwind_task_free(struct task_struct *task);
Called by do_exit() to free up any resources used by the
deferred unwinder.
None of the above is actually compiled unless an architecture enables it,
which none currently do"
Link: https://sourceware.org/binutils/wiki/sframe [1]
Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.260781923@kernel.org/ [2]
Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.432327787@kernel.org/ [3]
Link: https://lore.kernel.org/linux-trace-kernel/20250710163522.3195293-1-jremus@linux.ibm.com/ [4]
Link: https://lore.kernel.org/linux-trace-kernel/20250718164119.089692174@kernel.org/ [5]
Link: https://lore.kernel.org/linux-trace-kernel/20250424192612.505622711@goodmis.org/ [6]
Link: https://lore.kernel.org/linux-trace-kernel/20250717012848.927473176@kernel.org/ [7]
* tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
unwind: Finish up unwind when a task exits
unwind deferred: Use SRCU unwind_deferred_task_work()
unwind: Add USED bit to only have one conditional on way back to user space
unwind deferred: Add unwind_completed mask to stop spurious callbacks
unwind deferred: Use bitmask to determine which callbacks to call
unwind_user/deferred: Make unwind deferral requests NMI-safe
unwind_user/deferred: Add deferred unwinding interface
unwind_user/deferred: Add unwind cache
unwind_user/deferred: Add unwind_user_faultable()
unwind_user: Add user space unwinding API with frame pointer support
|
|
The step for TLV on tas2781, should be 50 (-0.5dB).
Fixes: 678f38eba1f2 ("ASoC: tas2781: Add Header file for tas2781 driver")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250801021618.64627-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation for using virtio_vsock_skb_rx_put() when populating SKBs
on the vsock TX path, rename virtio_vsock_skb_rx_put() to
virtio_vsock_skb_put().
No functional change.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-9-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When receiving a packet from a guest, vhost_vsock_handle_tx_kick()
calls vhost_vsock_alloc_linear_skb() to allocate and fill an SKB with
the receive data. Unfortunately, these are always linear allocations and
can therefore result in significant pressure on kmalloc() considering
that the maximum packet size (VIRTIO_VSOCK_MAX_PKT_BUF_SIZE +
VIRTIO_VSOCK_SKB_HEADROOM) is a little over 64KiB, resulting in a 128KiB
allocation for each packet.
Rework the vsock SKB allocation so that, for sizes with page order
greater than PAGE_ALLOC_COSTLY_ORDER, a nonlinear SKB is allocated
instead with the packet header in the SKB and the receive data in the
fragments. Finally, add a debug warning if virtio_vsock_skb_rx_put() is
ever called on an SKB with a non-zero length, as this would be
destructive for the nonlinear case.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-8-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_vsock_alloc_linear_skb() checks that the requested size is at
least big enough for the packet header (VIRTIO_VSOCK_SKB_HEADROOM).
Of the three callers of virtio_vsock_alloc_linear_skb(), only
vhost_vsock_alloc_skb() can potentially pass a packet smaller than the
header size and, as it already has a check against the maximum packet
size, extend its bounds checking to consider the minimum packet size
and remove the check from virtio_vsock_alloc_linear_skb().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-7-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In preparation for nonlinear allocations for large SKBs, rename
virtio_vsock_alloc_skb() to virtio_vsock_alloc_linear_skb() to indicate
that it returns linear SKBs unconditionally and switch all callers over
to this new interface for now.
No functional change.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-6-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When allocating receive buffers for the vsock virtio RX virtqueue, an
SKB is allocated with a 4140 data payload (the 44-byte packet header +
VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE). Even when factoring in the SKB
overhead, the resulting 8KiB allocation thanks to the rounding in
kmalloc_reserve() is wasteful (~3700 unusable bytes) and results in a
higher-order page allocation on systems with 4KiB pages just for the
sake of a few hundred bytes of packet data.
Limit the vsock virtio RX buffers to 4KiB per SKB, resulting in much
better memory utilisation and removing the need to allocate higher-order
pages entirely.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-5-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_vsock_skb_rx_put() only calls skb_put() if the length in the
packet header is not zero even though skb_put() handles this case
gracefully.
Remove the functionally redundant check from virtio_vsock_skb_rx_put()
and, on the assumption that this is a worthwhile optimisation for
handling credit messages, augment the existing length checks in
virtio_transport_rx_work() to elide the call for zero-length payloads.
Since the callers all have the length, extend virtio_vsock_skb_rx_put()
to take it as an additional parameter rather than fish it back out of
the packet header.
Note that the vhost code already has similar logic in
vhost_vsock_alloc_skb().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-4-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Since commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"),
the vhost uses vhost_task and operates as a child of the
owner thread. This is required for correct CPU usage accounting,
especially when using containers.
However, this change has caused confusion for some legacy
userspace applications, and we didn't notice until it's too late.
Unfortunately, it's too late to revert - we now have userspace
depending both on old and new behaviour :(
To address the issue, reintroduce kthread mode for vhost workers and
provide a configuration to select between kthread and task worker.
- Add 'fork_owner' parameter to vhost_dev to let users select kthread
or task mode. Default mode is task mode(VHOST_FORK_OWNER_TASK).
- Reintroduce kthread mode support:
* Bring back the original vhost_worker() implementation,
and renamed to vhost_run_work_kthread_list().
* Add cgroup support for the kthread
* Introduce struct vhost_worker_ops:
- Encapsulates create / stop / wake‑up callbacks.
- vhost_worker_create() selects the proper ops according to
inherit_owner.
- Userspace configuration interface:
* New IOCTLs:
- VHOST_SET_FORK_FROM_OWNER lets userspace select task mode
(VHOST_FORK_OWNER_TASK) or kthread mode (VHOST_FORK_OWNER_KTHREAD)
- VHOST_GET_FORK_FROM_OWNER reads the current worker mode
* Expose module parameter 'fork_from_owner_default' to allow system
administrators to configure the default mode for vhost workers
* Kconfig option CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL controls whether
these IOCTLs and the parameter are available
- The VHOST_NEW_WORKER functionality requires fork_owner to be set
to true, with validation added to ensure proper configuration
This partially reverts or improves upon:
commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
commit 1cdaafa1b8b4 ("vhost: replace single worker pointer with xarray")
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"),
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20250714071333.59794-2-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
The functions:
vringh_abandon_kern()
vringh_abandon_user()
vringh_iov_pull_kern() and
vringh_iov_push_kern()
were all added in 2013 by
commit f87d0fbb5798 ("vringh: host-side implementation of virtio rings.")
but have remained unused.
Remove them and the two helper functions they used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Message-Id: <20250617001838.114457-3-linux@treblig.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
|
|
The functions:
vringh_abandon_iotlb()
vringh_notify_disable_iotlb() and
vringh_notify_enable_iotlb()
were added in 2020 by
commit 9ad9c49cfe97 ("vringh: IOTLB support")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-Id: <20250617001838.114457-2-linux@treblig.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
The MMIO transport implementation creates a list of virtqueues for a
virtio device, while the same is already available in the struct
virtio_device.
Don't create a duplicate list, and use the other one instead.
While at it, fix the virtio_device_for_each_vq() macro to accept an
argument like "&vm_dev->vdev" (which currently fails to build).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <3e56c6f74002987e22f364d883cbad177cd9ad9c.1747827066.git.viresh.kumar@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The value of HASH_MAX_DESCSIZE is off by one for hmac(sha3-224-s390).
Fix this so that hmac(sha3-224-s390) can be registered.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 6f90ba706551 ("crypto: s390/sha3 - Use API partial block handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit f1180ca37abe3d117e4a19be12142fe722612a7c. Since the
commit, the vt ioctl numbers are defined differently on platforms where
_IOC_NONE is non-zero: alpha, mips, powerpc, sparc.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/436489B9-E67B-4630-909F-386C30A2AAC9@xenosoft.de/
Link: https://lore.kernel.org/all/97ec2636-915a-498c-903b-d66957420d21@csgroup.eu/
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250801082613.2564584-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- battery-info: replace any DT specific bits with fwnode usage
- replace any device-tree code with generic fwnode based handling
Power-supply drivers:
- ug3105_battery: use battery-info API
- qcom_battmgr: report capacity
- qcom_battmgr: support LiPo battery reporting
- add missing missing power-supply ref to a bunch of DT bindings
- update drivers regarding pm_runtime_autosuspend() usage
- misc minor fixes and cleanups
Reset drivers:
- misc minor cleanups"
* tag 'for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
power: supply: core: fix static checker warning
power: supply: twl4030_charger: Remove redundant pm_runtime_mark_last_busy() calls
power: supply: bq24190: Remove redundant pm_runtime_mark_last_busy() calls
MAINTAINERS: rectify file entry in QUALCOMM SMB CHARGER DRIVER
power: supply: max1720x correct capacity computation
MAINTAINERS: add myself as smbx charger driver maintainer
power: supply: pmi8998_charger: rename to qcom_smbx
power: supply: qcom_pmi8998_charger: fix wakeirq
power: supply: max14577: Handle NULL pdata when CONFIG_OF is not set
power: return the correct error code
power: reset: POWER_RESET_TORADEX_EC should depend on ARCH_MXC
power: supply: cpcap-charger: Fix null check for power_supply_get_by_name
power: supply: bq25980_charger: Constify reg_default array
power: supply: bq256xx_charger: Constify reg_default array
power: reset: at91-sama5d2_shdwc: Refactor wake-up source logging to use dev_info
power: reset: qcom-pon: Rename variables to use generic naming
power: supply: qcom_battmgr: Add lithium-polymer entry
power: supply: qcom_battmgr: Report battery capacity
power: supply: bq24190: Free battery_info
power: supply: ug3105_battery: Switch to power_supply_batinfo_ocv2cap()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- hardening of HID core parser against conversion to 0 bits in s32ton()
by buggy/malicious devices (Alan Stern)
- fix for potential NULL pointer dereference in hid-apple that could be
caused by malicious device with APPLE_MAGIC_BACKLIGHT quirk present
triggering overflow in data field (Qasim Ijaz)
- support for Wake-on-touch in intel-thc (Even Xu)
- support for "Input max input size control" and "Input interrupt
delay" I2C features in order to improve compatibility of THC devices
with legacy HIDI2C touch devices (Even Xu)
- support for Touch Bars on x86 MacBook Pros (Kerem Karabay)
- support for XP-PEN Artist 22R Pro (Joshua Goins)
- third party trackpart support for MacBookPro15,1 (Aditya Garg)
- Apple Magic Keyboard A311[89] USB-C support (Aditya Garg, Grigorii
Sokoli)
- support for operating modes in amd-sfh (Basavaraj Natikar)
- avoid setting up battery timer for Apple and Magicmouse devices
without battery (Aditya Garg)
- fix for behavior of the hid-mcp2221 driver for !CONFIG_IIO cases
(Heiko Schocher)
- other assorted fixups and device ID additions
* tag 'hid-for-linus-2025073101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits)
HID: core: Harden s32ton() against conversion to 0 bits
HID: apple: validate feature-report field count to prevent NULL pointer dereference
HID: core: Improve the kerneldoc for hid_report_len()
selftests/hid: sync python tests to hid-tools 0.10
selftests/hid: sync the python tests to hid-tools 0.8
selftests/hid: run ruff format on the python part
HID: magicmouse: use secs_to_jiffies() for battery timeout
HID: apple: use secs_to_jiffies() for battery timeout
HID: magicmouse: avoid setting up battery timer when not needed
HID: apple: avoid setting up battery timer for devices without battery
HID: amd_sfh: Enable operating mode
HID: uclogic: Add support for XP-PEN Artist 22R Pro
HID: rate-limit hid_warn to prevent log flooding
HID: replace scnprintf() with sysfs_emit()
HID: uclogic: make read-only array reconnect_event static const
HID: mcp-2221: Replace manual comparison with min() macro
HID: intel-thc-hid: Separate max input size control conditional list
HID: mcp2221: set gpio pin mode
HID: multitouch: add device ID for Apple Touch Bar
HID: multitouch: specify that Apple Touch Bar is direct
...
|
|
Instead of duplicating the same code for each architecture, move
the CFI type hash variables for BPF function types and related
helper functions to generic CFI code, and allow architectures to
override the function definitions if needed.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250801001004.1859976-7-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently x86 and riscv open-code 4 instances of the same logic to
define a u32 variable with the KCFI typeid of a given function.
Replace the duplicate logic with a common macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Maxwell Bland <mbland@motorola.com>
Signed-off-by: Maxwell Bland <mbland@motorola.com>
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Dao Huang <huangdao1@oppo.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250801001004.1859976-6-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bitmap updates from Yury Norov:
- find_random_bit() series (Yury)
- GENMASK() consolidation (Vincent)
- random cleanups (Shaopeng, Ben, Yury)
* tag 'bitmap-for-6.17' of https://github.com/norov/linux:
bitfield: Ensure the return values of helper functions are checked
test_bits: add tests for __GENMASK() and __GENMASK_ULL()
bits: unify the non-asm GENMASK*()
bits: split the definition of the asm and non-asm GENMASK*()
cpumask: Remove unnecessary cpumask_nth_andnot()
watchdog: fix opencoded cpumask_next_wrap() in watchdog_next_cpu()
clocksource: Improve randomness in clocksource_verify_choose_cpus()
cpumask: introduce cpumask_random()
bitmap: generalize node_random()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Add support for cgroup "cpu.max" interface
- Code organization cleanup so that ext_idle.c doesn't depend on the
source-file-inclusion build method of sched/
- Drop UP paths in accordance with sched core changes
- Documentation and other misc changes
* tag 'sched_ext-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix scx_bpf_reenqueue_local() reference
sched_ext: Drop kfuncs marked for removal in 6.15
sched_ext, rcu: Eject BPF scheduler on RCU CPU stall panic
kernel/sched/ext.c: fix typo "occured" -> "occurred" in comments
sched_ext: Add support for cgroup bandwidth control interface
sched_ext, sched/core: Factor out struct scx_task_group
sched_ext: Return NULL in llc_span
sched_ext: Always use SMP versions in kernel/sched/ext_idle.h
sched_ext: Always use SMP versions in kernel/sched/ext_idle.c
sched_ext: Always use SMP versions in kernel/sched/ext.h
sched_ext: Always use SMP versions in kernel/sched/ext.c
sched_ext: Documentation: Clarify time slice handling in task lifecycle
sched_ext: Make scx_locked_rq() inline
sched_ext: Make scx_rq_bypassing() inline
sched_ext: idle: Make local functions static in ext_idle.c
sched_ext: idle: Remove unnecessary ifdef in scx_bpf_cpu_node()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Allow css_rstat_updated() in NMI context to enable memory accounting
for allocations in NMI context.
- /proc/cgroups doesn't contain useful information for cgroup2 and was
updated to only show v1 controllers. This unfortunately broke
something in the wild. Add an option to bring back the old behavior
to ease transition.
- selftest updates and other cleanups.
* tag 'cgroup-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Add compatibility option for content of /proc/cgroups
selftests/cgroup: fix cpu.max tests
cgroup: llist: avoid memory tears for llist_node
selftests: cgroup: Fix missing newline in test_zswap_writeback_one
selftests: cgroup: Allow longer timeout for kmem_dead_cgroups cleanup
memcg: cgroup: call css_rstat_updated irrespective of in_nmi()
cgroup: remove per-cpu per-subsystem locks
cgroup: make css_rstat_updated nmi safe
cgroup: support to enable nmi-safe css_rstat_updated
selftests: cgroup: Fix compilation on pre-cgroupns kernels
selftests: cgroup: Optionally set up v1 environment
selftests: cgroup: Add support for named v1 hierarchies in test_core
selftests: cgroup_util: Add helpers for testing named v1 hierarchies
Documentation: cgroup: add section explaining controller availability
cgroup: Drop sock_cgroup_classid() dummy implementation
|
|
Pull workqueue updates from Tejun Heo:
- Prepare for defaulting to unbound workqueue. A separate branch was
created to ease pulling in from other trees but none of the
conversions have landed yet
- Memory allocation profiling support added
- Misc changes
* tag 'wq-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Use atomic_try_cmpxchg_relaxed() in tryinc_node_nr_active()
workqueue: Remove unused work_on_cpu_safe
workqueue: Add new WQ_PERCPU flag
workqueue: Add system_percpu_wq and system_dfl_wq
workqueue: Basic memory allocation profiling support
workqueue: fix opencoded cpumask_next_and_wrap() in wq_select_unbound_cpu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
- Teach handle_simple_irq() to resend an in-progress interrupt (Marc
Zyngier)
- Defer probing if the MSI widget driver hasn't probed yet (Marc Zyngier)
- Drop useless conditional compilation, since pci-xgene.c is only compiled
when CONFIG_PCI_XGENE is selected (Marc Zyngier)
- Drop useless XGENE_PCIE_IP_VER_UNKN IP version (Marc Zyngier)
- Simplify and make per-CPU interrupt setup robust (Marc Zyngier)
- Drop superfluous struct xgene_msi fields (Marc Zyngier)
- Use device-managed memory allocations (Marc Zyngier)
- Drop intermediate xgene_msi_group tracking structure (Marc Zyngier)
- Rewrite pci-xgene-msi.c to fix MSI CPU affinity and clean things up (Marc
Zyngier)
- Resend an MSI racing with itself on a different CPU (Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
- Simplify MSI handler setup/teardown by dropping useless CPU hotplug bits
(Marc Zyngier)
- Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD (Marc Zyngier)
* pci/controller/xgene:
cpu/hotplug: Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD
PCI: xgene-msi: Restructure handler setup/teardown
PCI: xgene-msi: Probe as a standard platform driver
PCI: xgene-msi: Resend an MSI racing with itself on a different CPU
PCI: xgene-msi: Sanitise MSI allocation and affinity setting
PCI: xgene-msi: Get rid of intermediate tracking structure
PCI: xgene-msi: Use device-managed memory allocations
PCI: xgene-msi: Drop superfluous fields from xgene_msi structure
PCI: xgene-msi: Make per-CPU interrupt setup robust
PCI: xgene: Drop XGENE_PCIE_IP_VER_UNKN
PCI: xgene: Drop useless conditional compilation
PCI: xgene: Defer probing if the MSI widget driver hasn't probed yet
genirq: Teach handle_simple_irq() to resend an in-progress interrupt
|
|
- Add RC-to-EP doorbell support using platform MSI controller (Frank Li)
- Check for MSI parent and mutability since we currently don't support
mutable MSI controllers (Frank Li)
- Add pci_epf_align_inbound_addr() helper (Frank Li)
- Add a doorbell test (Frank Li)
* pci/endpoint/doorbell:
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
|
|
- Restore VF resizable BAR state after reset (Michał Winiarski)
- Add pci_resource_num_to_vf_bar() and pci_resource_num_from_vf_bar() to
convert between VF BAR number and the dev->resource[] index (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size (Michał
Winiarski)
* pci/resources:
PCI/IOV: Allow drivers to control VF BAR size
PCI/IOV: Check that VF BAR fits within the reservation
PCI/IOV: Allow IOV resources to be resized in pci_resize_resource()
PCI/IOV: Add pci_resource_num_to_vf_bar() to convert VF BAR number to/from IOV resource
PCI/IOV: Restore VF resizable BAR state after reset
|
|
- Add optional slot clock for cases where the PCIe host controller and the
slot are supplied by different clocks (Marek Vasut)
- Fix kerneldoc tag for private fields (Bartosz Golaszewski)
* pci/pwrctrl:
PCI/pwrctrl: Fix the kerneldoc tag for private fields
PCI/pwrctrl: Add optional slot clock for PCI slots
|
|
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been removed
(Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the slot
is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug ports
(Lukas Wunner)
- Simplify pci_bridge_d3_possible() and clarify comments (Lukas Wunner)
* pci/hotplug:
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
|
|
- Allow 'isolated PCI functions' (multi-function devices without a function
0) for LoongArch, similar to s390 and jailhouse (Huacai Chen)
- Mask out unrelated bits in PCIE_LNKCAP_SLS2SPEED() and
PCIE_LNKCTL2_TLS2SPEED(), which makes them more robust and fixes a
WARN_ON_ONCE() in pcie_set_target_speed() (Jiwei Sun)
- Read Link Control 2 again when retraining a link after a training failure
so we try to increase the link speed (Jiwei Sun)
- Allow built-in drivers, not just modular drivers, to use async initial
probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability (Sean
Christopherson)
* pci/enumeration:
PCI: Support Immediate Readiness on devices without PM capabilities
PCI: Allow built-in drivers to use async initial probing
PCI: Adjust the position of reading the Link Control 2 register
PCI: Fix link speed calculation on retrain failure
PCI: Extend isolated function probing to LoongArch
|
|
Upstream commit 53889bcaf536 ("block: make __get_task_ioprio() easier to
read") changes the IO priority returned to the caller if no IO context
is defined for the task. Prior to this commit, the returned IO priority
was determined by task_nice_ioclass() and task_nice_ioprio(). Now it is
always IOPRIO_DEFAULT, which translates to IOPRIO_CLASS_NONE with priority
0. However, task_nice_ioclass() returns IOPRIO_CLASS_IDLE, IOPRIO_CLASS_RT,
or IOPRIO_CLASS_BE depending on the task scheduling policy, and
task_nice_ioprio() returns a value determined by task_nice(). This causes
regressions in test code checking the IO priority and class of IO
operations on tasks with no IO context.
Fix the problem by returning the IO priority calculated from
task_nice_ioclass() and task_nice_ioprio() if no IO context is defined
to match earlier behavior.
Fixes: 53889bcaf536 ("block: make __get_task_ioprio() easier to read")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250731044953.1852690-1-linux@roeck-us.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
- upgrade the python scripts in hid-selftests to match hid-tools
version 0.10 (Benjamin Tissoires)
|
|
- hardening of HID core parser against conversion to 0 bits in s32ton()
by buggy/malicious devices (Alan Stern)
|
