| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable. 3 are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-16-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: update email address for Ignat Korchagin
mm/huge_memory: fix early failure try_to_migrate() when split huge pmd for shared THP
mm/rmap: fix incorrect pte restoration for lazyfree folios
mm/huge_memory: fix use of NULL folio in move_pages_huge_pmd()
build_bug.h: correct function parameters names in kernel-doc
crash_dump: don't log dm-crypt key bytes in read_key_from_user_keying
|
|
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Normally the SDCA jack detection controls will be named after the GE
widget that represents the grouping of everything in the topology
controlled by the jack selection. However, in the case that the jack
selection only controls a single widget the control will be named after
the SU widget that implements that. It is rather confusing to have the
jack detection controls change naming scheme between devices. Add a new
widget type, similar to mixer widgets, to force use of the control name
rather than falling back to the widget names.
|
|
There is already a version of the mixer widget that forces use of the
specified control name, rather than factoring in the widget name. Add
the same feature for mux widgets.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260303155308.138989-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Johan Hovold <johan@kernel.org> says:
This series fixes a few issues related to controller registration found
through inspection.
|
|
DEFINE_GUARD_COND() for device_lock_interruptible()
Introduce conditional guard version of device_lock() for scenarios that
require conditional device lock holding.
This is a stable tag for other trees to merge.
|
|
__snd_pcm_set_state() writes runtime->state under the PCM stream lock.
However, the OSS I/O functions snd_pcm_oss_write3(), snd_pcm_oss_read3(),
snd_pcm_oss_writev3() and snd_pcm_oss_readv3() read runtime->state
without holding the stream lock, only holding oss.params_lock (a
different mutex that does not synchronize with the stream lock).
Since __snd_pcm_set_state() is called from IRQ context (e.g.,
snd_pcm_period_elapsed -> snd_pcm_update_state -> __snd_pcm_xrun ->
snd_pcm_stop -> snd_pcm_post_stop) while the OSS read/write paths
run in process context, these are concurrent accesses that constitute
a data race.
Rather than using READ_ONCE()/WRITE_ONCE() barriers, introduce a
snd_pcm_get_state() helper that reads runtime->state under the stream
lock, matching the locking discipline used elsewhere in the PCM layer.
Also export snd_pcm_set_state() for completeness.
Use snd_pcm_get_state() in all four OSS I/O functions, caching the
result in a local variable where the same snapshot is used for
multiple comparisons to avoid taking the lock repeatedly.
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260316085047.2876451-1-zzzccc427@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
Because old pcm_new()/pcm_free() didn't care about parameter component,
to avoid name collisions, we have added pcm_construct()/pcm_destruct() by
commit c64bfc9066007 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
Because all driver switch to new pcm_construct()/pcm_destruct(), old
pcm_new()/pcm_free() were remoted by commit e9067bb502787 ("ASoC:
soc-component: remove snd_pcm_ops from component driver")
But naming of pcm_construct()/pcm_destruct() are not goot. re-add
pcm_new()/pcm_free(), and switch to use it, again.
Because it has no functional significance, 1 patch is for 1 vender.
|
|
All driver have switched to use pcm_new()/pcm_free(), let's remove
pcm_construct()/pcm_destruct().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875x6wjyoa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because old pcm_new()/pcm_free() didn't care about parameter component,
to avoid name collisions, we have added pcm_construct()/pcm_destruct() by
commit c64bfc9066007 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
Because all driver switch to new pcm_construct()/pcm_destruct(), old
pcm_new()/pcm_free() were remoted by commit e9067bb502787 ("ASoC:
soc-component: remove snd_pcm_ops from component driver")
But naming of pcm_construct()/pcm_destruct() are not goot. re-add
pcm_new()/pcm_free(), and switch to use it, again.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a4w8lde4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This converts the Arizona driver to use GPIO descriptors
exclusively, deletes the legacy code path an updates the
in-tree user of legacy GPIO.
The GPIO lines for mic detect polarity and headphone ID
detection are made exclusively descriptor-oriented. The
headphone ID detection could actually only be used by
the legacy GPIO code, but I converted it to use a
descriptor if someone would actually need it so we don't
just drop useful code.
The compatible "wlf,hpdet-id-gpio" is not in the device
tree bindings and only intended to be used by software
nodes if any. If someone insists I can try to add a
binding for it, but I doubt there is any real user so
it seems pointless.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314-asoc-arizona-v1-1-ecc9a165307c@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert do_raw_{read,write}_trylock() from macros into inline functions
and annotate these inline functions with __cond_acquires_shared() or
__cond_acquires() as appropriate. This change is necessary to build
kernel drivers or subsystems that use rwlock synchronization objects with
lock context analysis enabled. The return type 'int' matches the return
type for CONFIG_DEBUG_SPINLOCK=y.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313171510.230998-3-bvanassche@acm.org
|
|
Architecture support for rwlocks must be available whether or not
CONFIG_DEBUG_SPINLOCK has been defined. Move the definitions of the
arch_{read,write}_{lock,trylock,unlock}() macros such that these become
visbile if CONFIG_DEBUG_SPINLOCK=n.
This patch prepares for converting do_raw_{read,write}_trylock() into
inline functions. Without this patch that conversion triggers a build
failure for UP architectures, e.g. arm-ep93xx. I used the following
kernel configuration to build the kernel for that architecture:
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V7=n
CONFIG_ATAGS=y
CONFIG_MMU=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_ARCH_EP93XX=y
Fixes: fb1c8f93d869 ("[PATCH] spinlock consolidation")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313171510.230998-2-bvanassche@acm.org
|
|
Andrew reported that a guard() conversion of zone_lock increased the
code size unnecessarily.
It turns out the unconditional __GUARD_IS_ERR() is to blame. As
explored earlier [1], __GUARD_IS_ERR(), similar to IS_ERR_OR_NULL(),
generates somewhat sub-optimal code.
However, looking at things again, it is possible to avoid doing the
__GUARD_IS_ERR() unconditionally. Revert the normal destructors to a
simple NULL test and only add the IS_ERR bit to COND guards.
This cures the reported overhead; as compiled by GCC-16:
page_alloc.o:
pre: Total: Before=45299, After=45371, chg +0.16%
post: Total: Before=45299, After=45026, chg -0.60%
[1] https://lkml.kernel.org/r/20250513085001.GC25891@noisy.programming.kicks-ass.net
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260309164516.GE606826@noisy.programming.kicks-ass.net
|
|
The extra braces for the initialization of the anonymous union members
were added in commit cd8d860dcce9 ("jump_label: Fix anonymous union
initialization") to compensate for limitations in gcc < 4.6.
Versions of gcc this old are not supported anymore,
so drop the workaround.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313-jump_label-cleanup-v2-2-35d3c0bde549@linutronix.de
|
|
Currently ATOMIC_INIT() is not used because in the past that macro was
provided by linux/atomic.h which is not usable from linux/jump_label.h.
However since commit 7ca8cf5347f7 ("locking/atomic: Move ATOMIC_INIT
into linux/types.h") the macro only requires linux/types.h.
Remove the now unnecessary workaround and the associated assertions.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313-jump_label-cleanup-v2-1-35d3c0bde549@linutronix.de
|
|
We need the USB fixes in this branch as well to build on top of
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a GPIO IRQ chip implementation for the kempld GPIO controller. Of
note is only how the parent IRQ is obtained.
The IRQ for the GPIO controller can be configured in the BIOS, along
with the IRQ for the I2C controller. These IRQ are returned by ACPI
but this information is only usable if both IRQ are configured. When
only one is configured, only one is returned making it impossible to
know which one it is.
Luckily the BIOS will set the configured IRQ in the PLD registers, so
it can be read from there instead, and that also work on platforms
without ACPI.
The vendor driver allowed to override the IRQ using a module
parameters, so there are boards in field which used this parameter
instead of properly configuring the BIOS. This implementation provides
this as well for compatibility.
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260311143120.2179347-5-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add .framebuffer_init, .framebuffer_fini and .framebuffer_lookup to the
bo parent interface. While they're about framebuffers, they're
specifically about framebuffer objects, so the bo interface is a good
enough fit, and there's no need to add another interface struct.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/848d32a44bf844cba3d66e44ba9f20bea4a8352d.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Continue i915 and xe separation from display by moving the bo calls to
the display parent interface. Instead of adding all these functions to
intel_parent.[ch], reuse the now vacated intel_bo.[ch], and avoid mass
renames to calls of these functions. This is similar to
intel_display_rpm.[ch].
Make many of the hooks optional to avoid having to implement dummy
functions in xe. Indeed now we can remove many of the existing dummy
functions.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/7899eef2ccf0cd603df69099df065226a0df917b.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
With no more users, remove legacy machine hog API from the kernel.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260309-gpio-hog-fwnode-v2-5-4e61f3dbf06a@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.1-2026-03-12:
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bring up hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
- UserQ fixes
- Move test for fbdev object to a generic helper
- GC 12.1 updates
- Use struct drm_edid in non-DC code
- Include IP discovery data in devcoredump
- SMU 13.x updates
- Misc cleanups
- DML 2.1 fixes
- Enable NV12/P010 support on primary planes
- Enable color encoding and color range on overlay planes
- DC underflow fixes
- HWSS fast path fixes
- Replay fixes
- DCN 4.2 updates
- Support newer IP discovery tables
- LSDMA 7.1 support
- IH 7.1 fixes
- SoC v1 updates
- GC12.1 updates
- PSP 15 updates
- XGMI fixes
- GPUVM locking fix
amdkfd:
- Fix missing BO unreserve in an error path
radeon:
- Move test for fbdev object to a generic helper
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260312184425.3875669-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
SoCs based on IPQ5210 is shipped under two different naming schemes namely
IPQ52xx and QCF2xxx/QCF3xxx. In the later variants Passive Optical Network
(PON) interface acts as the backhaul where as in the former it is
ethernet backhaul. Document the same.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313-b4-ipq5210_soc_ids-v1-1-97faae3fef95@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- add VM_BIND DECOMPRESS support and on-demand decompression (Nitin)
- Allow per queue programming of COMMON_SLICE_CHICKEN3 bit13 (Lionel)
Cross-subsystem Changes:
- Introduce the DRM RAS infrastructure over generic netlink (Riana, Rodrigo)
Core Changes:
- Two-pass MMU interval notifiers (Thomas)
Driver Changes:
- Merge drm/drm-next into drm-xe-next (Brost)
- Fix overflow in guc_ct_snapshot_capture (Mika, Fixes)
- Extract gt_pta_entry (Gustavo)
- Extra enabling patches for NVL-P (Gustavo)
- Add Wa_14026578760 (Varun)
- Add type-specific GT loop iterator (Roper)
- Refactor xe_migrate_prepare_vm (Raag)
- Don't disable GuCRC in suspend path (Vinay, Fixes)
- Add missing kernel docs in xe_exec_queue.c (Niranjana)
- Change TEST_VRAM to work with 32-bit resource_size_t (Wajdeczko)
- Fix memory leak in xe_vm_madvise_ioctl (Varun, Fixes)
- Skip access counter queue init for unsupported platforms (Himal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/abLUVfSHu8EHRF9q@lstrano-desk.jf.intel.com
|
|
drivers-for-7.1
Merge the relocated constants through a topic branch, to allow this
change being shared with other trees.
|
|
The QMI framework proposes a set of services which are defined by an
integer identifier. The different QMI client lookup for the services
via this identifier. Moreover, the function qmi_add_lookup() and
qmi_add_server() must match the service ID but the code in different
places set the same value but with a different macro name. These
macros are spreaded across the different subsystems implementing the
protocols associated with a service. It would make more sense to
define them in the QMI header for the sake of consistency and clarity.
This change use an unified naming for the services and enumerate the
ones implemented in the Linux kernel. More services can come later and
put the service ID in this same header.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260309230346.3584252-2-daniel.lezcano@oss.qualcomm.com
[bjorn: Lower case hex constants]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
It looks element length declared in servreg_loc_pfr_req_ei for reason
not matching servreg_loc_pfr_req's reason field due which we could
observe decoding error on PD crash.
qmi_decode_string_elem: String len 81 >= Max Len 65
Fix this by matching with servreg_loc_pfr_req's reason field.
Fixes: 1ebcde047c54 ("soc: qcom: add pd-mapper implementation")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20260129152320.3658053-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fix incorrect slice activation/deactivation accounting by replacing the
bitmap-based activation tracking with per-slice atomic reference counters.
This resolves mismatches that occur when multiple client drivers vote for
the same slice or when llcc_slice_getd() is called multiple times.
As part of this fix, simplify slice descriptor handling by eliminating
dynamic allocation. llcc_slice_getd() now returns a pointer to a
preallocated descriptor, removing the need for repeated allocation/free
cycles and ensuring consistent reference tracking across all users.
Signed-off-by: Unnathi Chalicheemala <unnathi.chalicheemala@oss.qualcomm.com>
Signed-off-by: Francisco Munoz Ruiz <francisco.ruiz@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-external_llcc_changes1set-v1-1-6347e52e648e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SM7450 and SM7450P are two SoCs of the 'fillmore' family.
Signed-off-by: Aelin Reidel <aelin@mainlining.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260302-fillmore-socids-v2-1-e6c5ad167ec4@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
James Calligeros <jcalligeros99@gmail.com> says:
This series introduces some infrastructure to allow platform drivers
to specify what a DAI should be doing when it is not active on the
bus. The primary use case for this is configuring bus keepers which
may be integrated into various codecs. The instigating use case for
this functionality is an interesting bus topology on Apple Silicon
laptops with multiple codecs.
Most Apple Silicon laptops have six codecs split into groups of
three, driving a pair of dual opposed woofers and a tweeter for
L/R stereo sound. These codecs report the voltage and current across
their connected voice coils back to the SoC via the SDOUT pin,
represented as PCM data sent via configurable TDM slots. This data is
used in conjunction with the connected speaker's Thiele/Small Parameters
to ensure that the speaker is not being driven to levels that would
permanently damage them. This is integrated into CoreAudio on macOS.
speakersafetyd[1] handles this for Linux.
All of the codec SDOUT pins are attached to a single receiver port
on the SoC's I2S peripheral, however are split across two physical
data lines (one each for the left and right codec groups). The receiver
has an OR gate in front of it, which is used to sum the two lines.
If at any point a codec is trying to transmit data, and the "opposite"
line ends up floating high, the transmitting codec's data will be
corrupted. We need to guarantee that the idle line stays idle.
In the downstream Asahi Linux kernel[2], we set up one codec in each
group to zero-fill or pull down its line while a codec on the opposite
line is actively transmitting. This is done entirely in the codec
driver, however this approach is over-fit for this one use case. This
sort of functionality may also be of use for other hardware, so following
previous mailing list discussions[3], I have tried to expose the
functionality in a more configurable and generic way.
I have integrated this approach into our downstream platform driver
and select Devicetrees as an example of how this mechanism is intended
to be used[4].
[1] https://github.com/AsahiLinux/speakersafetyd
[2] https://github.com/AsahiLinux/linux/tree/bits/070-audio
[3] https://lore.kernel.org/asahi/20250227-apple-codec-changes-v3-17-cbb130030acf@gmail.com/
[4] https://github.com/chadmed/tree/tdm-revised2
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-0-c6ac5351489a@gmail.com
|
|
Some audio devices, like certain Texas Instruments codecs, integrate
configurable bus keepers that dictate the codec's behaviour during
idle TDM slots. Now that we have definitions for various idle modes,
add a snd_soc_dai_set_tdm_idle() operation to control this in a
standardised way.
This is useful on Apple Silicon laptops, where a single I2S bus is
comprised of two physical lines which are ORed just before the
receiving port. When a codec on one line is transmitting, we must
guarantee that the other line is low. We can achieve this by
configuring one codec on each line to use its bus keeper to fill
its line with zeroes during the active slots of the other line.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-5-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some audio devices, such as certain Texas Instruments codecs,
include configurable bus keepers. We currently don't have
a standardised way to configure such hardware, and instead
rely on the hardware initialising setting itself up into a
sane state. There are situations where this is insufficient,
however, and some platforms require more concrete guarantees
as to the state of the bus, and being able to explicitly
configure bus keepers enables this.
For example, some Apple Silicon machines have an odd bus topology where
the SDOUT pins of all codecs are split across two data lines, which
are summed via an OR gate in front of the receiving port on the
SoC's I2S peripheral. Each line must transmit 0 while a codec
on the other line is actively transmitting data, or the SoC
will receive garbage data. To do this, one codec on each line
must be configured to transmit zeroes during the other line's
active TDM slots.
Thus, we define seven possible bus-keeping modes that a device can
be in: NONE (UB/as initialised), OFF (explicitly disabled), ZERO
(actively transmit a 0), PULLDOWN, HIZ (floating), PULLUP, and
DRIVE_HIGH.
These will be consumed by CODEC/CPU drivers via a common DAI
op, enabling the explicit configuration of bus keepers where
required.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-4-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Linus Walleij <linusw@kernel.org> says:
After a quick look and test-compile I can determine that
all of these drivers include <linux/gpio.h> for no reason
whatsoever, so fixing it is low hanging fruit.
Link: https://patch.msgid.link/20260314-asoc-amd-v1-0-31afed06e022@kernel.org
|
|
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"More MM-CID fixes, mostly fixing hangs/races:
- Fix CID hangs due to a race between concurrent forks
- Fix vfork()/CLONE_VM MMCID bug causing hangs
- Remove pointless preemption guard
- Fix CID task list walk performance regression on large systems
by removing the known-flaky and slow counting logic using
for_each_process_thread() in mm_cid_*fixup_tasks_to_cpus(), and
implementing a simple sched_mm_cid::node list instead"
* tag 'sched-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/mmcid: Avoid full tasklist walks
sched/mmcid: Remove pointless preempt guard
sched/mmcid: Handle vfork()/CLONE_VM correctly
sched/mmcid: Prevent CID stalls due to concurrent forks
|
|
Add a pci_epc_bar_type BAR_DISABLED to more clearly differentiate from
BAR_RESERVED.
This BAR type will only be used to describe a BAR that the EPC driver
should disable, and will thus never be available to an EPF driver.
(Unlike BAR_RESERVED, which will never be disabled by default by an EPC
driver.)
Co-developed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Koichiro Den <den@valinux.co.jp>
Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Link: https://patch.msgid.link/20260312130229.2282001-17-cassel@kernel.org
|
|
Some endpoint controllers expose platform-owned, fixed register windows
within a BAR that EPF drivers must not reprogram (e.g. a BAR marked
BAR_RESERVED). Even in that case, EPF drivers may need to reference a
well-defined subset of that BAR, e.g. to reuse an integrated DMA
controller MMIO window as a doorbell target.
Introduce struct pci_epc_bar_rsvd_region and extend struct
pci_epc_bar_desc so EPC drivers can advertise such fixed subregions in a
controller-agnostic way.
No functional change for existing users.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260312130229.2282001-15-cassel@kernel.org
|
|
Remove the documentation that forbids setting only_64bit on a BAR of type
BAR_RESERVED.
When a reserved BAR is 64-bit by default, setting only_64bit is the most
accurate description. If we later add support to disable a reserved BAR
(e.g. disable_bar() for BARs that were never set via set_bar()), the
implementation will need to clear the adjacent BAR (upper 32 bits) as well;
having only_64bit set documents that requirement.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260312130229.2282001-14-cassel@kernel.org
|
|
A BAR that can only be configured as a 64-bit BAR by an EPC driver is
marked as such using the "only_64bit" flag.
Currently, the documentation says that an EPC driver should explicitly
mark the BAR succeeding an "only_64bit" BAR as BAR_RESERVED.
However, a 64-bit BAR will always take up two BARs. It is thus redundant
to mark both BARs.
pci_epc_get_next_free_bar() already skips the BAR succeeding a "only_64bit"
BAR, regardless if the succeeding BAR is marked as BAR_RESERVED or not.
Thus, drop the BAR_RESERVED for a BAR succeeding a "only_64bit" BAR.
No functional changes.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260312130229.2282001-13-cassel@kernel.org
|
|
Use the previously introduced shared devlink infrastructure to create
a shared devlink instance for mlx5 PFs that reside on the same physical
chip. The shared instance is identified by the chip's serial number
extracted from PCI VPD (V3 keyword, with fallback to serial number
for older devices).
Each PF that probes calls mlx5_shd_init() which extracts the chip serial
number and uses devlink_shd_get() to get or create the shared instance.
When a PF is removed, mlx5_shd_uninit() calls devlink_shd_put()
to release the reference. The shared instance is automatically destroyed
when the last PF is removed.
Make the PF devlink instances nested in this shared devlink instance,
allowing userspace to identify which PFs belong to the same physical
chip.
Example:
pci/0000:08:00.0: index 0
nested_devlink:
auxiliary/mlx5_core.eth.0
devlink_index/1: index 1
nested_devlink:
pci/0000:08:00.0
pci/0000:08:00.1
auxiliary/mlx5_core.eth.0: index 2
pci/0000:08:00.1: index 3
nested_devlink:
auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1: index 4
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-14-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiple PFs may reside on the same physical chip, running a single
firmware. Some of the resources and configurations may be shared among
these PFs. Currently, there is no good object to pin the configuration
knobs on.
Introduce a shared devlink instance, instantiated upon probe of
the first PF and removed during remove of the last PF. The shared
devlink instance is not backed by any device device, as there is
no PCI device related to it.
The implementation uses reference counting to manage the lifecycle:
each PF that probes calls devlink_shd_get() to get or create
the shared instance, and calls devlink_shd_put() when it removes.
The shared instance is automatically destroyed when the last PF removes.
Example:
pci/0000:08:00.0: index 0
nested_devlink:
auxiliary/mlx5_core.eth.0
devlink_index/1: index 1
nested_devlink:
pci/0000:08:00.0
pci/0000:08:00.1
auxiliary/mlx5_core.eth.0: index 2
pci/0000:08:00.1: index 3
nested_devlink:
auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1: index 4
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-12-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation to dev-less devlinks, add devlink_dev_driver_name()
that returns the driver name stored in devlink struct, and use it in
all trace events.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devlink instances without a backing device use bus_name
"devlink_index" and dev_name set to the decimal index string.
When user space sends this handle, detect the pattern and perform
a direct xarray lookup by index instead of iterating all instances.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-6-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce devlink_bus_name() and devlink_dev_name() helpers and
convert all direct accesses to devlink->dev->bus->name and
dev_name(devlink->dev) to use them.
This prepares for dev-less devlink instances where these helpers
will be extended to handle the missing device.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each devlink instance has an internally assigned index used for xarray
storage. Expose it as a new DEVLINK_ATTR_INDEX uint attribute alongside
the existing bus_name and dev_name handle.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This moves definition of mdio_bus class and bus_type to the provider
side, what allows to make them private to libphy.
As a prerequisite MDIO statistics handling is moved to the
provider side as well.
Note: This patch causes a checkpatch error "Macros with complex values
should be enclosed in parentheses" for
MDIO_BUS_STATS_ADDR_ATTR_GROUP. I consider this a false positive
here, in addition the patch just moves existing code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/47b85676-b349-4aa0-a5ef-cd37769a4c69@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch
- makes mdio_device.c part of libphy
- makes mdio_device_(un)register_reset() static
- moves mdiobus_(un)register_device() from mdio_bus.c to mdio_device.c,
stops exporting both functions and makes them private to phylib
This further decouples the MDIO consumer functionality from libphy.
Note: This makes MDIO driver registration part of phylib, therefore
adjust Kconfig dependencies where needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c6dbf9b3-3ca0-434b-ad3a-71fe602ab809@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here is a large chunk of USB driver fixes for 7.0-rc4. Included in
here are:
- usb gadget reverts due to reported issues, and then a follow-on fix
to hopefully resolve the reported overall problem
- xhci driver fixes
- dwc3 driver fixes
- usb core "killable" bulk message api addition to fix a usbtmc
driver bug where userspace could hang the driver for forever
- small USB driver fixes for reported issues
- new usb device quirks
All except the last USB device quirk change have been in linux-next
with no reported issues. That one came in too late, and is 'obviously
correct' :)"
* tag 'usb-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
USB: ezcap401 needs USB_QUIRK_NO_BOS to function on 10gbs usb speed
usb: roles: get usb role switch from parent only for usb-b-connector
Revert "tcpm: allow looking for role_sw device in the main node"
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
Revert "usb: gadget: u_ether: add gether_opts for config caching"
Revert "usb: gadget: u_ether: use <linux/hex.h> header file"
Revert "usb: gadget: u_ether: Add auto-cleanup helper for freeing net_device"
Revert "usb: gadget: f_ncm: align net_device lifecycle with bind/unbind"
Revert "usb: legacy: ncm: Fix NPE in gncm_bind"
Revert "usb: gadget: f_ncm: Fix atomic context locking issue"
usb: typec: altmode/displayport: set displayport signaling rate in configure message
usb: dwc3: pci: add support for the Intel Nova Lake -H
usb/core/quirks: Add Huawei ME906S-device to wakeup quirk
usb: gadget: uvc: fix interval_duration calculation
xhci: Fix NULL pointer dereference when reading portli debugfs files
usb: xhci: Prevent interrupt storm on host controller error (HCE)
usb: xhci: Fix memory leak in xhci_disable_slot()
usb: class: cdc-wdm: fix reordering issue in read code path
usb: renesas_usbhs: fix use-after-free in ISR during device removal
usb: cdc-acm: Restore CAP_BRK functionnality to CH343
...
|
|
The pci_dev is only used to provide the ethtool bus_info using
pci_name(priv->plat->pdev). This is the same as dev_name(priv->device).
Thus, rather than passing the pci_dev, make use of what we already
have.
To avoid unexpectedly exposing the device name through ethtool where
it wasn't provided before, add a flag priv->plat->provide_bus_info
to enable this, which only dwmac-intel needs to set.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1w0evI-0000000CzY7-1fyo@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver fixes from Greg KH:
"Here are some char/misc/iio/binder fixes for 7.0-rc4. Nothing major in
here, just the usual:
- lots of iio driver fixes for reported issues
- rust binder fixes for problems found
- gpib driver binding to the wrong device fix
- firmware driver fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (28 commits)
gpib: lpvo_usb: fix unintended binding of FTDI 8U232AM devices
firmware: stratix10-svc: Add Multi SVC clients support
rust_binder: use lock_vma_under_rcu() in use_page_slow()
rust_binder: call set_notification_done() without proc lock
rust_binder: avoid reading the written value in offsets array
rust_binder: check ownership before using vma
rust_binder: fix oneway spam detection
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
iio: imu: adis: Fix NULL pointer dereference in adis_init
iio: imu: inv_icm45600: fix regulator put warning when probe fails
iio: buffer: Fix wait_queue not being removed
iio: gyro: mpu3050-core: fix pm_runtime error handling
iio: gyro: mpu3050-i2c: fix pm_runtime error handling
iio: adc: ad7768-1: Fix ERR_PTR dereference in ad7768_fill_scale_tbl
iio: chemical: sps30_serial: fix buffer size in sps30_serial_read_meas()
iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas()
iio: magnetometer: tlv493d: remove erroneous shift in X-axis data
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
iio: proximity: hx9023s: fix assignment order for __counted_by
iio: chemical: bme680: Fix measurement wait duration calculation
...
|
|
ip[6]tunnel_xmit() can drop packets if a too deep recursion level
is detected.
Add SKB_DROP_REASON_RECURSION_LIMIT drop reason.
We will use this reason later in __dev_queue_xmit().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260312201824.203093-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
