| Age | Commit message (Collapse) | Author |
|---|
|
There's no driver left using this other than ipw2200,
so move the data bookkeeping and code into libipw.
Link: https://patch.msgid.link/20241007210254.037d864cda7d.Ib2197cb056ff05746d3521a5fba637062acb7314@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's already much code in libipw that used to be shared
with more drivers, but now with the prior cleanups, those old
Intel ipw2x00 drivers are also the only ones using whatever is
now left of lib80211. Move lib80211 entirely into libipw.
Link: https://patch.msgid.link/20241007202707.915ef7b9e7c7.Ib9876d2fe3c90f11d6df458b16d0b7d4bf551a8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After commit dcb0b5575d24 ("tracing: Remove TRACE_EVENT_FL_USE_CALL_FILTER
logic"), no one's going to set the TRACE_EVENT_FL_FILTERED or change the
call->filter, so remove related logic.
Link: https://lore.kernel.org/20240911010026.2302849-1-zhengyejian@huaweicloud.com
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()`
helper to create a new tagged `struct ieee80211_radiotap_header_fixed`.
This structure groups together all the members of the flexible
`struct ieee80211_radiotap_header` except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct ieee80211_radiotap_header` to `struct
ieee80211_radiotap_header_fixed`.
We also want to ensure that in case new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct ieee80211_radiotap_header_fixed`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with these changes, fix the following warnings:
drivers/net/wireless/ath/wil6210/txrx.c:309:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2100.c:2521:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2200.h:1146:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/libipw.h:595:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:34:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:5:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:10:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:15:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:758:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:767:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZwBMtBZKcrzwU7l4@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add wiphy_delayed_work_pending() to check if any delayed work timer is
pending, that can be used to be sure that wiphy_delayed_work_queue()
won't postpone an already pending delayed work.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/20240924192805.13859-2-repk@triplefau.lt
[fix return value kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Cgroup-level CPU statistics currently include time spent on
user/system processes, but do not include niced CPU time (despite
already being tracked). This patch exposes niced CPU time to the
userspace, allowing users to get a better understanding of their
hardware limits and can facilitate more informed workload distribution.
A new field 'ntime' is added to struct cgroup_base_stat as opposed to
struct task_cputime to minimize footprint.
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
WQ_MAX_ACTIVE is currently set to 512, which was established approximately
15 yeas ago. However, with the significant increase in machine sizes and
capabilities, the previous limit of 256 concurrent tasks is no longer
sufficient. Therefore, we propose to increase WQ_MAX_ACTIVE to 2048.
and WQ_DFL_ACTIVE is 1024 now.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
cfag12864b_getrate() and cfag12864b_isenabled() were both added
in commit 70e840499aae ("[PATCH] drivers: add LCD support")
but never used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Some drivers can still provide their functionality to a certain extent
even when some of their resource acquisitions eventually fail. In such
cases, emitting errors isn't the desired action, but warnings should be
emitted instead.
To solve this, introduce dev_warn_probe() as a new device probe log helper,
which behaves identically as the already existing dev_err_probe(), while it
produces warnings instead of errors. The intended use is with the resources
that are actually optional for a particular driver.
While there, copyedit the kerneldoc for dev_err_probe() a bit, to simplify
its wording a bit, and reuse it as the kerneldoc for dev_warn_probe(), with
the necessary wording adjustments, of course.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Hélène Vulquin <oss@helene.moe>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2be0a28538bb2a3d1bcc91e2ca1f2d0dc09146d9.1727601608.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PTL is an integrated GPU based on the Xe3 architecture.
v2: explicitly turn off display until display patches land.
Bspec: 72574
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-6-matthew.s.atwood@intel.com
|
|
Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor.
Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c182ece6-2ba0-ce4f-3404-dba7a3ab6c52@huawei.com
Link: https://lore.kernel.org/all/20241002204959.2051709-1-maz@kernel.org
|
|
This media format is used by the NXP Semiconductors 1fc9:009b chipset,
used by the Kaiweets KTI-W02 infrared camera.
Signed-off-by: David Given <dg@cowlark.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240918180540.10830-1-dg@cowlark.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The formats added by this patch are:
UVC_GUID_FORMAT_Y16I
Interlaced lumina format primary use in RealSense Depth cameras with
stereo stream for left and right image sensors.
Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/a717a912035b0a0f82b2f35719cca0c5269e995f.camel@intel.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The formats added by this patch are:
V4L2_PIX_FMT_Y16I
Interlaced lumina format primary use in RealSense Depth cameras with
stereo stream for left and right image sensors.
Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/568efbd75290e286b8ad9e7347b5f43745121020.camel@intel.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
On PTL platforms with media version 30.00, the fuse registers for
reporting L3 bank availability to the GT just read out as ~0 and do not
provide proper values. Xe does not use the L3 bank mask for anything
internally; it only passes the mask through to userspace via the GT
topology query.
Since we don't have any way to get the real L3 bank mask, we don't want
to pass garbage to userspace. Passing a zeroed mask or a copy of the
primary GT's L3 bank mask would also be inaccurate and likely to cause
confusion for userspace. The best approach is to simply not include L3
in the list of masks returned by the topology query in cases where we
aren't able to provide a meaningful value. This won't change the
behavior for any existing platforms (where we can always obtain L3 masks
successfully for all GTs), it will only prevent us from mis-reporting
bad information on upcoming platform(s).
There's a good chance this will become a formal workaround in the
future, but for now we don't have a lineage number so "no_media_l3" is
used in place of a lineage as the OOB workaround descriptor.
v2:
- Re-calculate query size to properly match data returned. (Gustavo)
- Update kerneldoc to clarify that the L3bank mask may not be included
in the query results if the hardware doesn't make it available.
(Gustavo)
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007154143.2021124-2-matthew.d.roper@intel.com
|
|
Once an RTNL scope is converted with rtnl_net_lock(), we will replace
RTNL helper functions inside the scope with the following per-netns
alternatives:
ASSERT_RTNL() -> ASSERT_RTNL_NET(net)
rcu_dereference_rtnl(p) -> rcu_dereference_rtnl_net(net, p)
Note that the per-netns helpers are equivalent to the conventional
helpers unless CONFIG_DEBUG_NET_SMALL_RTNL is enabled.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The goal is to break RTNL down into per-netns mutex.
This patch adds per-netns mutex and its helper functions, rtnl_net_lock()
and rtnl_net_unlock().
rtnl_net_lock() acquires the global RTNL and per-netns RTNL mutex, and
rtnl_net_unlock() releases them.
We will replace 800+ rtnl_lock() with rtnl_net_lock() and finally removes
rtnl_lock() in rtnl_net_lock().
When we need to nest per-netns RTNL mutex, we will use __rtnl_net_lock(),
and its locking order is defined by rtnl_net_lock_cmp_fn() as follows:
1. init_net is first
2. netns address ascending order
Note that the conversion will be done under CONFIG_DEBUG_NET_SMALL_RTNL
with LOCKDEP so that we can carefully add the extra mutex without slowing
down RTNL operations during conversion.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 464eb03c4a7cfb32cb3324249193cf6bb5b35152.
Once we have a per-netns RTNL, we won't use guard(rtnl).
Also, there's no users for now.
$ grep -rnI "guard(rtnl" || true
$
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89i+KoYzUH+VPLdGmLABYf5y4TW0hrM4UAeQQJ9AREty0iw@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The omap4 camera driver has seen no progress since forever, and
now OMAP4 support has also been dropped from u-boot (1). So it is
time to retire this driver.
(1): https://lists.denx.de/pipermail/u-boot/2024-July/558846.html
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Darrick J. Wong <djwong@kernel.org> says:
This patchset fixes multiple data corruption bugs in the fallocate
unshare range implementation for fsdax.
* patches from https://lore.kernel.org/r/172796813251.1131942.12184885574609980777.stgit@frogsfrogsfrogs:
fsdax: dax_unshare_iter needs to copy entire blocks
fsdax: remove zeroing code from dax_unshare_iter
iomap: share iomap_unshare_iter predicate code with fsdax
xfs: don't allocate COW extents when unsharing a hole
Link: https://lore.kernel.org/r/172796813251.1131942.12184885574609980777.stgit@frogsfrogsfrogs
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Introduce support for configuring the master/slave role of PHYs based on
the `timing-role` property in the device tree. While this functionality
is necessary for Single Pair Ethernet (SPE) PHYs (1000/100/10Base-T1)
where hardware strap pins may be unavailable or incorrectly set, it
works for any PHY type.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Giving the opportunity to userspace to associate a free-form
name with a drm_file struct is helpful for tracking and debugging.
This is similar to the existing DMA_BUF_SET_NAME ioctl.
Access to client_name is protected by a mutex, and the 'clients' debugfs
file has been updated to print it.
Userspace MR to use this ioctl:
https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/1428
If the string passed by userspace contains chars that would mess up output
when it's going to be printed (in dmesg, fdinfo, etc), -EINVAL is returned.
A 0-length string is a valid use, and clears the existing name.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003124506.470931-2-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
This drm printer wrapper can be used to increase the robustness of
the captured output generated by any other drm_printer to make sure
we didn't lost any intermediate lines of the output by adding line
numbers to each output line. Helpful for capturing some crash data.
v2: Extended short int counters to full int (JohnH)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003004611.2323493-8-John.C.Harrison@Intel.com
|
|
Jordan reported that when running Cilium with netkit in per-endpoint-routes
mode, network policy misclassifies traffic. In this direct routing mode
of Cilium which is used in case of GKE/EKS/AKS, the Pod's BPF program to
enforce policy sits on the netkit primary device's egress side.
The issue here is that in case of netkit's netkit_prep_forward(), it will
clear meta data such as skb->mark and skb->priority before executing the
BPF program. Thus, identity data stored in there from earlier BPF programs
(e.g. from tcx ingress on the physical device) gets cleared instead of
being made available for the primary's program to process. While for traffic
egressing the Pod via the peer device this might be desired, this is
different for the primary one where compared to tcx egress on the host
veth this information would be available.
To address this, add a new parameter for the device orchestration to
allow control of skb->mark and skb->priority scrubbing, to make the two
accessible from BPF (and eventually leave it up to the program to scrub).
By default, the current behavior is retained. For netkit peer this also
enables the use case where applications could cooperate/signal intent to
the BPF program.
Note that struct netkit has a 4 byte hole between policy and bundle which
is used here, in other words, struct netkit's first cacheline content used
in fast-path does not get moved around.
Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device")
Reported-by: Jordan Rife <jrife@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://github.com/cilium/cilium/issues/34042
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20241004101335.117711-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Upcoming per-netns RTNL conversion needs to get rid
of shared hash tables.
fib_info_devhash[] is one of them.
It is unclear why we used a hash table, because
a single hlist_head per net device was cheaper and scalable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241004134720.579244-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No driver now uses the DSA switch phylink members, so we can now remove
the method pointers, but we need to leave empty shim functions to allow
those drivers that do not provide phylink MAC operations structure to
continue functioning.
Signed-off-by: Russell King (oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # sja1105, felix, dsa_loop
Link: https://patch.msgid.link/E1swKNV-0060oN-1b@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new SMI event to report the dropped event count.
When the event kfifo is full, drop count is not zero, or no enough space
left to store the event message, increase drop count.
After reading event out from kfifo, if event was dropped, drop_count is
not zero, generate a dropped event record and reset drop count to zero.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If page migration failed, also output migrate end event to match with
migrate start event, with failure error_code added to the end of the
migrate message macro. This will not break uAPI because application uses
old message macro sscanf drop and ignore the error_code.
Output GPU page fault restore end event if migration failed.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We never had callers for __close_range() except for close_range(2)
itself. Nothing of that sort has appeared in four years and if any users
do show up, we can always separate those suckers again.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Once upon a time, predecessors of those used to do file lookup
without bumping a refcount, provided that caller held rcu_read_lock()
across the lookup and whatever it wanted to read from the struct
file found. When struct file allocation switched to SLAB_TYPESAFE_BY_RCU,
that stopped being feasible and these primitives started to bump the
file refcount for lookup result, requiring the caller to call fput()
afterwards.
But that turned them pointless - e.g.
rcu_read_lock();
file = lookup_fdget_rcu(fd);
rcu_read_unlock();
is equivalent to
file = fget_raw(fd);
and all callers of lookup_fdget_rcu() are of that form. Similarly,
task_lookup_fdget_rcu() calls can be replaced with calling fget_task().
task_lookup_next_fdget_rcu() doesn't have direct counterparts, but
its callers would be happier if we replaced it with an analogue that
deals with RCU internally.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Merge spk_rtd_init for multifunction sdca codecs:rt712/rt722
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241007075955.12575-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixes build issues with the KVM selftests.
|
|
Pulls in a build fix for the KVM selftests.
|
|
The predicate code that iomap_unshare_iter uses to decide if it's really
needs to unshare a file range mapping should be shared with the fsdax
version, because right now they're opencoded and inconsistent.
Note that we simplify the predicate logic a bit -- we no longer allow
unsharing of inline data mappings, but there aren't any filesystems that
allow shared inline data currently.
This is a fix in the sense that it should have been ported to fsdax.
Fixes: b53fdb215d13 ("iomap: improve shared block detection in iomap_unshare_iter")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/172796813294.1131942.15762084021076932620.stgit@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
netfslib currently defers dropping the ref on the folios it obtains during
readahead to after it has started I/O on the basis that we can do it whilst
we wait for the I/O to complete, but this runs the risk of the I/O
collection racing with this in future.
Furthermore, Matthew Wilcox strongly suggests that the refs should be
dropped immediately, as readahead_folio() does (netfslib is using
__readahead_batch() which doesn't drop the refs).
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3771538.1728052438@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Matthew Wilcox (Oracle) <willy@infradead.org> says:
A few minor fixes; nothing earth-shattering.
Matthew Wilcox (Oracle) (3):
netfs: Remove call to folio_index()
netfs: Fix a few minor bugs in netfs_page_mkwrite()
netfs: Remove unnecessary references to pages
Link: https://lore.kernel.org/r/20241005182307.3190401-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Calling folio_index() is pointless overhead; directly dereferencing
folio->index is fine.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241005182307.3190401-2-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around 1
per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide when to invalidate the cache. Even with NFSv4, a lot of
exported filesystems don't properly support a change attribute and are
subject to the same problems with timestamp granularity. Other
applications have similar issues with timestamps (e.g backup
applications).
If fine-grained timestamps were always used, that would improve the
situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
What is needed is a way to only use fine-grained timestamps when they
are being actively queried. Use the (unused) top bit in
inode->i_ctime_nsec as a flag that indicates whether the current
timestamps have been queried via stat() or the like. When it's set,
allow the update to use a fine-grained timestamp iff it's necessary to
make the ctime show a different value.
If it has been queried, then first see whether the current coarse time
is later than the existing ctime. If it is, accept that value. If it
isn't, then get a fine-grained timestamp and attempt to stamp the inode
ctime with that value. If that races with another concurrent stamp, then
abandon the update and take the new value without retrying.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same floor
value as multigrain filesystems).
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-3-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20241003154819.1075141-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
bit_wait_io_timeout has been unused since 2016's
commit 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241001234016.231696-1-linux@treblig.org
|
|
__HAVE_THREAD_FUNCTIONS could be defined by architectures wishing to
provide their own task_thread_info(), task_stack_page(),
setup_thread_stack() and end_of_stack() hooks.
Commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
removed the last upstream consumer of __HAVE_THREAD_FUNCTIONS, so change
the remaining !CONFIG_THREAD_INFO_IN_TASK && !__HAVE_THREAD_FUNCTIONS
conditionals to only check for the former case.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20240930050945.30304-2-ddiss@suse.de
|
|
It is not currently possible to wait wait_var_event for an io_schedule()
style wait. This patch adds wait_var_event_io() for that purpose.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240925053405.3960701-7-neilb@suse.de
|
|
Sometimes we need to wait for a condition to be true which must be
testing while holding a lock. Correspondingly the condition is made
true while holding the lock and the wake up is sent under the lock.
This patch provides wake and wait interfaces which can be used for this
situation when the lock is a mutex or a spinlock, or any other lock for
which there are foo_lock() and foo_unlock() functions.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240925053405.3960701-6-neilb@suse.de
|
|
There are common patterns in the kernel of using test_and_clear_bit()
before wake_up_bit(), and atomic_dec_and_test() before wake_up_var().
These combinations don't need extra barriers but sometimes include them
unnecessarily.
To help avoid the unnecessary barriers and to help discourage the
general use of wake_up_bit/var (which is a fragile interface) introduce
two combined functions which implement these patterns.
Also add store_release_wake_up() which supports the task of simply
setting a non-atomic variable and sending a wakeup. This pattern
requires barriers which are often omitted.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240925053405.3960701-5-neilb@suse.de
|
|
wake_up_var(), wait_var_event() and related interfaces are not
documented but have important ordering requirements. This patch adds
documentation and makes these requirements explicit.
The return values for those wait_var_event_* functions which return a
value are documented. Note that these are, perhaps surprisingly,
sometimes different from comparable wait_on_bit() functions.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240925053405.3960701-4-neilb@suse.de
|
|
This patch revises the documention for wake_up_bit(),
clear_and_wake_up_bit(), and all the wait_on_bit() family of functions.
The new documentation places less emphasis on the pool of waitqueues
used (an implementation detail) and focuses instead on details of how
the functions behave.
The barriers included in the wait functions and clear_and_wake_up_bit()
and those required for wake_up_bit() are spelled out more clearly.
The error statuses returned are given explicitly.
The fact that the wait_on_bit_lock() function sets the bit is made more
obvious.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240925053405.3960701-3-neilb@suse.de
|
|
wake_up_bit() currently allows a "void *". While this isn't strictly a
problem as the address is never dereferenced, it is inconsistent with
the corresponding wait_on_bit() which requires "unsigned long *" and
does dereference the pointer.
Any code that needs to wait for a change in something other than an
unsigned long would be better served by wake_up_var()/wait_var_event().
This patch changes all related "void *" to "unsigned long *".
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240925053405.3960701-2-neilb@suse.de
|
|
Provide a new api rdma_user_mmap_disassociate() for drivers to
disassociate mmap pages for a device.
Since drivers can now disassociate mmaps by calling this api,
introduce a new disassociation_lock to specifically prevent
races between this disassociation process and new mmaps. And
thus the old hw_destroy_rwsem is not needed in this api.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240927103323.1897094-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pick up the VFS specific interfaces so further timekeeping changes can be
based on them.
|
|
The mgtime_floor value is a global variable for tracking the latest
fine-grained timestamp handed out. Because it's a global, track the
number of times that a new floor value is assigned.
Add a new percpu counter to the timekeeping code to track the number of
floor swap events that have occurred. A later patch will add a debugfs
file to display this counter alongside other stats involving multigrain
timestamps.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Link: https://lore.kernel.org/all/20241002-mgtime-v10-2-d1c4717f5284@kernel.org
|
