| Age | Commit message (Collapse) | Author |
|---|
|
Will need to add supplementary groups to create messages, so add the
general concept of a request extension. A request extension is appended to
the end of the main request. It has a header indicating the size and type
of the extension.
The create security context (fuse_secctx_*) is similar to the generic
request extension, so include that as well in a backward compatible manner.
Add the total extension length to the request header. The offset of the
extension block within the request can be calculated by:
inh->len - inh->total_extlen * 8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There are multiple ICMP rate limiting mechanisms:
* Global limits: net.ipv4.icmp_msgs_burst/icmp_msgs_per_sec
* v4 per-host limits: net.ipv4.icmp_ratelimit/ratemask
* v6 per-host limits: net.ipv6.icmp_ratelimit/ratemask
However, when ICMP output is limited, there is no way to tell
which limit has been hit or even if the limits are responsible
for the lack of ICMP output.
Add counters for each of the cases above. As we are within
local_bh_disable(), use the __INC stats variant.
Example output:
# nstat -sz "*RateLimit*"
IcmpOutRateLimitGlobal 134 0.0
IcmpOutRateLimitHost 770 0.0
Icmp6OutRateLimitHost 84 0.0
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Suggested-by: Abhishek Rawal <rawal.abhishek92@gmail.com>
Link: https://lore.kernel.org/r/273b32241e6b7fdc5c609e6f5ebc68caf3994342.1674605770.git.jamie.bainbridge@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When doing p2p with a NIC device, the NIC needs to make sure all the
writes to the HBM (through the PCI bar of the Gaudi device) were
flushed.
It can be done by either the NIC or the host reading through the PCI
bar.
To support the host side, we supply a simple uapi to perform this flush
through the driver, because the user can't create such a transaction
by itself (the PCI bar isn't exposed to normal users).
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Move the habanalabs.h uapi file from include/uapi/misc to
include/uapi/drm, and rename it to habanalabs_accel.h.
This is required before moving the actual driver to the accel
subsystem.
Update MAINTAINERS file accordingly.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add a uAPI, as part of the INFO IOCTL, to allow users to send
requests directly to f/w, according to a pre-defined set of opcodes
that the f/w exposes.
The f/w will put the result in a kernel-allocated buffer, which the
driver will then copy to the user-supplied buffer.
This will allow f/w tools to communicate directly with the f/w
without the need to add a new uAPI to the driver for each new type
of request.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
A previous commit deprecated the option to export from handle, leaving
the code with no support for devices with virtual memory.
This commit modifies the export API in a way that unifies the uAPI to
user address for both cases (i.e. with and without MMU support) and add
the actual support for devices with virtual memory.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Users who want to share a single public IP address for outgoing connections
between several hosts traditionally reach for SNAT. However, SNAT requires
state keeping on the node(s) performing the NAT.
A stateless alternative exists, where a single IP address used for egress
can be shared between several hosts by partitioning the available ephemeral
port range. In such a setup:
1. Each host gets assigned a disjoint range of ephemeral ports.
2. Applications open connections from the host-assigned port range.
3. Return traffic gets routed to the host based on both, the destination IP
and the destination port.
An application which wants to open an outgoing connection (connect) from a
given port range today can choose between two solutions:
1. Manually pick the source port by bind()'ing to it before connect()'ing
the socket.
This approach has a couple of downsides:
a) Search for a free port has to be implemented in the user-space. If
the chosen 4-tuple happens to be busy, the application needs to retry
from a different local port number.
Detecting if 4-tuple is busy can be either easy (TCP) or hard
(UDP). In TCP case, the application simply has to check if connect()
returned an error (EADDRNOTAVAIL). That is assuming that the local
port sharing was enabled (REUSEADDR) by all the sockets.
# Assume desired local port range is 60_000-60_511
s = socket(AF_INET, SOCK_STREAM)
s.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s.bind(("192.0.2.1", 60_000))
s.connect(("1.1.1.1", 53))
# Fails only if 192.0.2.1:60000 -> 1.1.1.1:53 is busy
# Application must retry with another local port
In case of UDP, the network stack allows binding more than one socket
to the same 4-tuple, when local port sharing is enabled
(REUSEADDR). Hence detecting the conflict is much harder and involves
querying sock_diag and toggling the REUSEADDR flag [1].
b) For TCP, bind()-ing to a port within the ephemeral port range means
that no connecting sockets, that is those which leave it to the
network stack to find a free local port at connect() time, can use
the this port.
IOW, the bind hash bucket tb->fastreuse will be 0 or 1, and the port
will be skipped during the free port search at connect() time.
2. Isolate the app in a dedicated netns and use the use the per-netns
ip_local_port_range sysctl to adjust the ephemeral port range bounds.
The per-netns setting affects all sockets, so this approach can be used
only if:
- there is just one egress IP address, or
- the desired egress port range is the same for all egress IP addresses
used by the application.
For TCP, this approach avoids the downsides of (1). Free port search and
4-tuple conflict detection is done by the network stack:
system("sysctl -w net.ipv4.ip_local_port_range='60000 60511'")
s = socket(AF_INET, SOCK_STREAM)
s.setsockopt(SOL_IP, IP_BIND_ADDRESS_NO_PORT, 1)
s.bind(("192.0.2.1", 0))
s.connect(("1.1.1.1", 53))
# Fails if all 4-tuples 192.0.2.1:60000-60511 -> 1.1.1.1:53 are busy
For UDP this approach has limited applicability. Setting the
IP_BIND_ADDRESS_NO_PORT socket option does not result in local source
port being shared with other connected UDP sockets.
Hence relying on the network stack to find a free source port, limits the
number of outgoing UDP flows from a single IP address down to the number
of available ephemeral ports.
To put it another way, partitioning the ephemeral port range between hosts
using the existing Linux networking API is cumbersome.
To address this use case, add a new socket option at the SOL_IP level,
named IP_LOCAL_PORT_RANGE. The new option can be used to clamp down the
ephemeral port range for each socket individually.
The option can be used only to narrow down the per-netns local port
range. If the per-socket range lies outside of the per-netns range, the
latter takes precedence.
UAPI-wise, the low and high range bounds are passed to the kernel as a pair
of u16 values in host byte order packed into a u32. This avoids pointer
passing.
PORT_LO = 40_000
PORT_HI = 40_511
s = socket(AF_INET, SOCK_STREAM)
v = struct.pack("I", PORT_HI << 16 | PORT_LO)
s.setsockopt(SOL_IP, IP_LOCAL_PORT_RANGE, v)
s.bind(("127.0.0.1", 0))
s.getsockname()
# Local address between ("127.0.0.1", 40_000) and ("127.0.0.1", 40_511),
# if there is a free port. EADDRINUSE otherwise.
[1] https://github.com/cloudflare/cloudflare-blog/blob/232b432c1d57/2022-02-connectx/connectx.py#L116
Reviewed-by: Marek Majkowski <marek@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
* EDID: Improved mode parsing and refactoring
* fbdev: Cleanups
* format-helper: Add conversion from XRGB8888 to XBGR8888 and ABGR8888
Driver Changes:
* accel/ivpu: Add driver for Intel VPU accelerator
* bridge: Support i.MX93 LDB plus DT bindings
* exynos: Fixes
* panel: vtdr6130: Fixes; Support AUO A030JTN01 plus DT bindings
* simpledrm: Support system-memory framebuffers plus DT bindings
* ssd130x: Fix sparse warning
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPQN9YACgkQaA3BHVML
# eiNmmQf/bTV3oaMo55i3tYxhMCWYDtPVk+GGglDAykW7Lid8pvy6mJqJoW6uvgQF
# c6CcoY+6yG2WvnVLhXyhPaACiG5weQSdu3S/DdZ2nuJCb50YCwWNNKcu3qYnLVlz
# 2NQ/s0HN+Xvvy76GJFNarKlxSNADPWCNJ8wExAdBkWr7q8NiDfsWuMGrQRQORrm3
# zEkSJPKtWNHa+vmsQOO9yebD0LFx97CoU40FrVXZTtF0FugGIXjiknQwekzuFxdY
# fGBiFKsI+Y3s51gAppbmRRJ0jGLj3KDF5S+5GM8FNbgJQF67Wxttl/YtY6lJGcsa
# l0vpRoCe1ilhNVvoikzAu7UewkPKKA==
# =GLLt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 25 Jan 2023 05:56:06 AEST
# gpg: using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9A5ceDknyQixM3R@linux-uq9g
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.3-2023-01-20:
amdgpu:
- Secure display fixes
- Fix scaling
- Misc code cleanups
- Display BW alloc logic updates
- DCN 3.2 fixes
- Fix power reporting on certain firmwares for CZN/RN
- SR-IOV fixes
- Link training cleanup and code rework
- HDCP fixes
- Reserved VMID fix
- Documentation updates
- Colorspace fixes
- RAS updates
- GC11.0 fixes
- VCN instance harvesting fixes
- DCN 3.1.4/5 workarounds for S/G displays
- Add PCIe info to the INFO IOCTL
amdkfd:
- XNACK fix
UAPI:
- Add PCIe gen/lanes info to the amdgpu INFO IOCTL
Nesa ultimately plans to use this to make decisions about buffer placement optimizations
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120234523.7610-1-alexander.deucher@amd.com
|
|
When building a list of filter events, it can sometimes be a challenge
to fit all the events needed to adequately restrict the guest into the
limited space available in the pmu event filter. This stems from the
fact that the pmu event filter requires each event (i.e. event select +
unit mask) be listed, when the intention might be to restrict the
event select all together, regardless of it's unit mask. Instead of
increasing the number of filter events in the pmu event filter, add a
new encoding that is able to do a more generalized match on the unit mask.
Introduce masked events as another encoding the pmu event filter
understands. Masked events has the fields: mask, match, and exclude.
When filtering based on these events, the mask is applied to the guest's
unit mask to see if it matches the match value (i.e. umask & mask ==
match). The exclude bit can then be used to exclude events from that
match. E.g. for a given event select, if it's easier to say which unit
mask values shouldn't be filtered, a masked event can be set up to match
all possible unit mask values, then another masked event can be set up to
match the unit mask values that shouldn't be filtered.
Userspace can query to see if this feature exists by looking for the
capability, KVM_CAP_PMU_EVENT_MASKED_EVENTS.
This feature is enabled by setting the flags field in the pmu event
filter to KVM_PMU_EVENT_FLAG_MASKED_EVENTS.
Events can be encoded by using KVM_PMU_ENCODE_MASKED_ENTRY().
It is an error to have a bit set outside the valid bits for a masked
event, and calls to KVM_SET_PMU_EVENT_FILTER will return -EINVAL in
such cases, including the high bits of the event select (35:32) if
called on Intel.
With these updates the filter matching code has been updated to match on
a common event. Masked events were flexible enough to handle both event
types, so they were used as the common event. This changes how guest
events get filtered because regardless of the type of event used in the
uAPI, they will be converted to masked events. Because of this there
could be a slight performance hit because instead of matching the filter
event with a lookup on event select + unit mask, it does a lookup on event
select then walks the unit masks to find the match. This shouldn't be a
big problem because I would expect the set of common event selects to be
small, and if they aren't the set can likely be reduced by using masked
events to generalize the unit mask. Using one type of event when
filtering guest events allows for a common code path to be used.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-5-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
* Cleanup unneeded include statements wrt <linux/fb.h>, <drm/drm_fb_helper.h>
and <drm/drm_crtc_helper.h>
* Remove unused helper DRM_DEBUG_KMS_RATELIMITED()
* fbdev: Remove obsolete aperture field from struct fb_device, plus
driver cleanups; Remove unused flag FBINFO_MISC_FIRMWARE
* MIPI-DSI: Fix brightness, plus rsp. driver updates
* scheduler: Deprecate drm_sched_resubmit_jobs()
* ttm: Fix MIPS build; Remove ttm_bo_wait(); Documentation fixes
Driver Changes:
* Remove obsolete drivers for userspace modesetting i810, mga, r128,
savage, sis, tdfx, via
* bridge: Support CDNS DSI J721E, plus DT bindings; lt9611: Various
fixes and improvements; sil902x: Various fixes; Fixes
* nouveau: Removed support for legacy ioctls; Replace zero-size array;
Cleanups
* panel: Fixes
* radeon: Use new DRM logging helpers
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8kDk5YX7Yz3eRhM@linux-uq9g
|
|
Regenerate the FOU uAPI header from the YAML spec.
The flags now come before attributes which use them,
and the comments for type disappear (coders should look
at the spec instead).
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This reverts commit (bff3d0534804: "netfilter: conntrack: add sctp
DATA_SENT state")
Using DATA/SACK to detect a new connection on secondary/alternate paths
works only on new connections, while a HEARTBEAT is required on
connection re-use. It is probably consistent to wait for HEARTBEAT to
create a secondary connection in conntrack.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.3
First set of patches for v6.3. The most important change here is that
the old Wireless Extension user space interface is not supported on
Wi-Fi 7 devices at all. We also added a warning if anyone with modern
drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless
Extensions, everyone should switch to using nl80211 interface instead.
Static WEP support is removed, there wasn't any driver using that
anyway so there's no user impact. Otherwise it's smaller features and
fixes as usual.
Note: As mt76 had tricky conflicts due to the fixes in wireless tree,
we decided to merge wireless into wireless-next to solve them easily.
There should not be any merge problems anymore.
Major changes:
cfg80211
- remove never used static WEP support
- warn if Wireless Extention interface is used with cfg80211/mac80211 drivers
- stop supporting Wireless Extensions with Wi-Fi 7 devices
- support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting
rfkill
- add GPIO DT support
bitfield
- add FIELD_PREP_CONST()
mt76
- per-PHY LED support
rtw89
- support new Bluetooth co-existance version
rtl8xxxu
- support RTL8188EU
* tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (123 commits)
wifi: wireless: deny wireless extensions on MLO-capable devices
wifi: wireless: warn on most wireless extension usage
wifi: mac80211: drop extra 'e' from ieeee80211... name
wifi: cfg80211: Deduplicate certificate loading
bitfield: add FIELD_PREP_CONST()
wifi: mac80211: add kernel-doc for EHT structure
mac80211: support minimal EHT rate reporting on RX
wifi: mac80211: Add HE MU-MIMO related flags in ieee80211_bss_conf
wifi: mac80211: Add VHT MU-MIMO related flags in ieee80211_bss_conf
wifi: cfg80211: Use MLD address to indicate MLD STA disconnection
wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offload
wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()
wifi: cfg80211: remove support for static WEP
wifi: rtl8xxxu: Dump the efuse only for untested devices
wifi: rtl8xxxu: Print the ROM version too
wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update()
wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter()
wifi: rtw88: Move register access from rtw_bf_assoc() outside the RCU
wifi: rtl8xxxu: Use a longer retry limit of 48
wifi: rtl8xxxu: Report the RSSI to the firmware
...
====================
Link: https://lore.kernel.org/r/20230123103338.330CBC433EF@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New flag BPF_F_XDP_DEV_BOUND_ONLY plus all the infra to have a way
to associate a netdev with a BPF program at load time.
netdevsim checks are dropped in favor of generic check in dev_xdp_attach.
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-6-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
We need the USB fixes in here and this resolves merge conflicts as
reported in linux-next in the following files:
drivers/usb/host/xhci.c
drivers/usb/host/xhci.h
drivers/usb/typec/ucsi/ucsi.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
IEEE 802.3-2018 clause 99 defines a MAC Merge sublayer which contains an
Express MAC and a Preemptible MAC. Both MACs are hidden to higher and
lower layers and visible as a single MAC (packet classification to eMAC
or pMAC on TX is done based on priority; classification on RX is done
based on SFD).
For devices which support a MAC Merge sublayer, it is desirable to
retrieve individual packet counters from the eMAC and the pMAC, as well
as aggregate statistics (their sum).
Introduce a new ETHTOOL_A_STATS_SRC attribute which is part of the
policy of ETHTOOL_MSG_STATS_GET and, and an ETHTOOL_A_PAUSE_STATS_SRC
which is part of the policy of ETHTOOL_MSG_PAUSE_GET (accepted when
ETHTOOL_FLAG_STATS is set in the common ethtool header). Both of these
take values from enum ethtool_mac_stats_src, defaulting to "aggregate"
in the absence of the attribute.
Existing drivers do not need to pay attention to this enum which was
added to all driver-facing structures, just the ones which report the
MAC merge layer as supported.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MAC merge sublayer (IEEE 802.3-2018 clause 99) is one of 2
specifications (the other being Frame Preemption; IEEE 802.1Q-2018
clause 6.7.2), which work together to minimize latency caused by frame
interference at TX. The overall goal of TSN is for normal traffic and
traffic with a bounded deadline to be able to cohabitate on the same L2
network and not bother each other too much.
The standards achieve this (partly) by introducing the concept of
preemptible traffic, i.e. Ethernet frames that have a custom value for
the Start-of-Frame-Delimiter (SFD), and these frames can be fragmented
and reassembled at L2 on a link-local basis. The non-preemptible frames
are called express traffic, they are transmitted using a normal SFD, and
they can preempt preemptible frames, therefore having lower latency,
which can matter at lower (100 Mbps) link speeds, or at high MTUs (jumbo
frames around 9K). Preemption is not recursive, i.e. a P frame cannot
preempt another P frame. Preemption also does not depend upon priority,
or otherwise said, an E frame with prio 0 will still preempt a P frame
with prio 7.
In terms of implementation, the standards talk about the presence of an
express MAC (eMAC) which handles express traffic, and a preemptible MAC
(pMAC) which handles preemptible traffic, and these MACs are multiplexed
on the same MII by a MAC merge layer.
To support frame preemption, the definition of the SFD was generalized
to SMD (Start-of-mPacket-Delimiter), where an mPacket is essentially an
Ethernet frame fragment, or a complete frame. Stations unaware of an SMD
value different from the standard SFD will treat P frames as error
frames. To prevent that from happening, a negotiation process is
defined.
On RX, packets are dispatched to the eMAC or pMAC after being filtered
by their SMD. On TX, the eMAC/pMAC classification decision is taken by
the 802.1Q spec, based on packet priority (each of the 8 user priority
values may have an admin-status of preemptible or express).
The MAC Merge layer and the Frame Preemption parameters have some degree
of independence in terms of how software stacks are supposed to deal
with them. The activation of the MM layer is supposed to be controlled
by an LLDP daemon (after it has been communicated that the link partner
also supports it), after which a (hardware-based or not) verification
handshake takes place, before actually enabling the feature. So the
process is intended to be relatively plug-and-play. Whereas FP settings
are supposed to be coordinated across a network using something
approximating NETCONF.
The support contained here is exclusively for the 802.3 (MAC Merge)
portions and not for the 802.1Q (Frame Preemption) parts. This API is
sufficient for an LLDP daemon to do its job. The FP adminStatus variable
from 802.1Q is outside the scope of an LLDP daemon.
I have taken a few creative licenses and augmented the Linux kernel UAPI
compared to the standard managed objects recommended by IEEE 802.3.
These are:
- ETHTOOL_A_MM_PMAC_ENABLED: According to Figure 99-6: Receive
Processing state diagram, a MAC Merge layer is always supposed to be
able to receive P frames. However, this implies keeping the pMAC
powered on, which will consume needless power in applications where FP
will never be used. If LLDP is used, the reception of an Additional
Ethernet Capabilities TLV from the link partner is sufficient
indication that the pMAC should be enabled. So my proposal is that in
Linux, we keep the pMAC turned off by default and that user space
turns it on when needed.
- ETHTOOL_A_MM_VERIFY_ENABLED: The IEEE managed object is called
aMACMergeVerifyDisableTx. I opted for consistency (positive logic) in
the boolean netlink attributes offered, so this is also positive here.
Other than the meaning being reversed, they correspond to the same
thing.
- ETHTOOL_A_MM_MAX_VERIFY_TIME: I found it most reasonable for a LLDP
daemon to maximize the verifyTime variable (delay between SMD-V
transmissions), to maximize its chances that the LP replies. IEEE says
that the verifyTime can range between 1 and 128 ms, but the NXP ENETC
stupidly keeps this variable in a 7 bit register, so the maximum
supported value is 127 ms. I could have chosen to hardcode this in the
LLDP daemon to a lower value, but why not let the kernel expose its
supported range directly.
- ETHTOOL_A_MM_TX_MIN_FRAG_SIZE: the standard managed object is called
aMACMergeAddFragSize, and expresses the "additional" fragment size
(on top of ETH_ZLEN), whereas this expresses the absolute value of the
fragment size.
- ETHTOOL_A_MM_RX_MIN_FRAG_SIZE: there doesn't appear to exist a managed
object mandated by the standard, but user space clearly needs to know
what is the minimum supported fragment size of our local receiver,
since LLDP must advertise a value no lower than that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The meye driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.
The hardware is very old, so the decision was made to remove it
altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support to manage configurations (format, crop, compose) per stream,
instead of per pad. This is accomplished with data structures that hold
an array of all subdev's stream configurations.
The number of streams can vary at runtime based on routing. Every time
the routing is changed, the stream configurations need to be
re-initialized.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support for subdev internal routing. A route is defined as a single
stream from a sink pad to a source pad.
The userspace can configure the routing via two new ioctls,
VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING, and subdevs can
implement the functionality with v4l2_subdev_pad_ops.set_routing().
- Add sink and source streams for multiplexed links
- Copy the argument back in case of an error. This is needed to let the
caller know the number of routes.
- Expand and refine documentation.
- Make the 'routes' pointer a __u64 __user pointer so that a compat32
version of the ioctl is not required.
- Add struct v4l2_subdev_krouting to be used for subdevice operations.
- Fix typecasing warnings
- Check sink & source pad types
- Add 'which' field
- Routing to subdev state
- Dropped get_routing subdev op
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a subdev capability flag to expose to userspace if a subdev supports
multiplexed streams.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Prepare TVLV infrastructure for more packet types, in particular the
upcoming batman-adv multicast packet type.
For that swap the OGM vs. unicast-tvlv packet boolean indicator to an
explicit unsigned integer packet type variable. And provide the skb
to a call to batadv_tvlv_containers_process(), as later the multicast
packet's TVLV handler will need to have access not only to the TVLV but
the full skb for forwarding. Forwarding will be invoked from the
multicast packet's TVLVs' contents later.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
drivers/net/ipa/ipa_interrupt.c
drivers/net/ipa/ipa_interrupt.h
9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend")
8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()")
d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration")
https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/
https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add Y210, Y212 and Y216 formats.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Add RGBX1010102, RGBA1010102 and ARGB2101010 formats.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Implement support for a new note type NT_ARM64_ZT providing access to
ZT0 when implemented. Since ZT0 is a register with constant size this is
much simpler than for other SME state.
As ZT0 is only accessible when PSTATE.ZA is set writes to ZT0 cause
PSTATE.ZA to be set, the main alternative would be to return -EBUSY in
this case but this seemed more constructive. Practical users are also
going to be working with ZA anyway and have some understanding of the
state.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-12-f2fa0aef982f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add new rewrite table and all the required functions, offload hooks and
bookkeeping for maintaining it. The rewrite table reuses the app struct,
and the entire set of app selectors. As such, some bookeeping code can
be shared between the rewrite- and the APP table.
New functions for getting, setting and deleting entries has been added.
Apart from operating on the rewrite list, these functions do not emit a
DCB_APP_EVENT when the list os modified. The new dcb_getrewr does a
lookup based on selector and priority and returns the protocol, so that
mappings from priority to protocol, for a given selector and ifindex is
obtained.
Also, a new nested attribute has been added, that encapsulates one or
more app structs. This attribute is used to distinguish the two tables.
The dcb_lock used for the APP table is reused for the rewrite table.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For computing PCIe bandwidth in userspace and troubleshooting PCIe
bandwidth issues. Note that this intentionally fills holes and padding
in drm_amdgpu_info_device.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
An async transaction to a frozen process will still be successfully
put in the queue. But this pending async transaction won't be processed
until the target process is unfrozen at an unspecified time in the
future. Pass this important information back to the user space caller
by returning BR_TRANSACTION_PENDING_FROZEN.
Signed-off-by: Li Li <dualli@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20221123201654.589322-2-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The KD_FONT_OP_SET/GET operations hardcode vpitch to be 32 pixels,
which only dates from the old VGA hardware which as asserting this.
Drivers such as fbcon however do not have such limitation, so this
introduces KD_FONT_OP_SET/GET_TALL operations, which userland can try
to use to avoid this limitation, thus opening the patch to >32 pixels
font height.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20230119151935.013597162@ens-lyon.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
16750 indicates 64 bytes FIFO with a IIR bit. Add define for it and
make related code more obvious.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20221125130509.8482-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't use magic literals & comments but define a real field instead
for UART_IIR_FIFO_ENABLED and name also the values.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20221125130509.8482-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a custom (non-USB IF) extension to the USB standard:
https://wicg.github.io/webusb/
This specification is published under the W3C Community Contributor
Agreement, which in particular allows to implement the specification
without any royalties.
The specification allows USB gadgets to announce an URL to landing
page and describes a Javascript interface for websites to interact
with the USB gadget, if the user allows it. It is currently
supported by Chromium-based browsers, such as Chrome, Edge and
Opera on all major operating systems including Linux.
This patch adds optional support for Linux-based USB gadgets
wishing to expose such a landing page.
During device enumeration, a host recognizes that the announced
USB version is at least 2.01, which means, that there are BOS
descriptors available. The device than announces WebUSB support
using a platform device capability. This includes a vendor code
under which the landing page URL can be retrieved using a
vendor-specific request.
Previously, the BOS descriptors would unconditionally include an
LPM related descriptor, as BOS descriptors were only ever sent
when the device was LPM capable. As this is no longer the case,
this patch puts this descriptor behind a lpm_capable condition.
Usage is modeled after os_desc descriptors:
echo 1 > webusb/use
echo "https://www.kernel.org" > webusb/landingPage
lsusb will report the device with the following lines:
Platform Device Capability:
bLength 24
bDescriptorType 16
bDevCapabilityType 5
bReserved 0
PlatformCapabilityUUID {3408b638-09a9-47a0-8bfd-a0768815b665}
WebUSB:
bcdVersion 1.00
bVendorCode 0
iLandingPage 1 https://www.kernel.org
Signed-off-by: Jó Ágila Bitsch <jgilab@gmail.com>
Link: https://lore.kernel.org/r/Y8Crf8P2qAWuuk/F@jo-einhundert
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Each of the user contexts has two command queues, one for compute engine
and one for the copy engine. Command queues are allocated and registered
in the device when the first job (command buffer) is submitted from
the user space to the VPU device. The userspace provides a list of
GEM buffer object handles to submit to the VPU, the driver resolves
buffer handles, pins physical memory if needed, increments ref count
for each buffer and stores pointers to buffer objects in
the ivpu_job objects that track jobs submitted to the device.
The VPU signals job completion with an asynchronous message that
contains the job id passed to firmware when the job was submitted.
Currently, the driver supports simple scheduling logic
where jobs submitted from user space are immediately pushed
to the VPU device command queues. In the future, it will be
extended to use hardware base scheduling and/or drm_sched.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-7-jacek.lawrynowicz@linux.intel.com
|
|
Read, parse and boot VPU firmware image.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-6-jacek.lawrynowicz@linux.intel.com
|
|
Adds four types of GEM-based BOs for the VPU:
- shmem
- internal
- prime
All types are implemented as struct ivpu_bo, based on
struct drm_gem_object. VPU address is allocated when buffer is created
except for imported prime buffers that allocate it in BO_INFO IOCTL due
to missing file_priv arg in gem_prime_import callback.
Internal buffers are pinned on creation, the rest of buffers types
can be pinned on demand (in SUBMIT IOCTL).
Buffer VPU address, allocated pages and mappings are released when the
buffer is destroyed.
Eviction mechanism is planned for future versions.
Add two new IOCTLs: BO_CREATE, BO_INFO
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-4-jacek.lawrynowicz@linux.intel.com
|
|
VPU Memory Management Unit is based on ARM MMU-600.
It allows the creation of multiple virtual address spaces for
the device and map noncontinuous host memory (there is no dedicated
memory on the VPU).
Address space is implemented as a struct ivpu_mmu_context, it has an ID,
drm_mm allocator for VPU addresses and struct ivpu_mmu_pgtable that
holds actual 3-level, 4KB page table.
Context with ID 0 (global context) is created upon driver initialization
and it's mainly used for mapping memory required to execute
the firmware.
Contexts with non-zero IDs are user contexts allocated each time
the devices is open()-ed and they map command buffers and other
workload-related memory.
Workloads executing in a given contexts have access only
to the memory mapped in this context.
This patch is has two main files:
- ivpu_mmu_context.c handles MMU page tables and memory mapping
- ivpu_mmu.c implements a driver that programs the MMU device
Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-3-jacek.lawrynowicz@linux.intel.com
|
|
VPU stands for Versatile Processing Unit and it's a CPU-integrated
inference accelerator for Computer Vision and Deep Learning
applications.
The VPU device consist of following components:
- Buttress - provides CPU to VPU integration, interrupt, frequency and
power management.
- Memory Management Unit (based on ARM MMU-600) - translates VPU to
host DMA addresses, isolates user workloads.
- RISC based microcontroller - executes firmware that provides job
execution API for the kernel-mode driver
- Neural Compute Subsystem (NCS) - does the actual work, provides
Compute and Copy engines.
- Network on Chip (NoC) - network fabric connecting all the components
This driver supports VPU IP v2.7 integrated into Intel Meteor Lake
client CPUs (14th generation).
Module sources are at drivers/accel/ivpu and module name is
"intel_vpu.ko".
This patch includes only very besic functionality:
- module, PCI device and IRQ initialization
- register definitions and low level register manipulation functions
- SET/GET_PARAM ioctls
- power up without firmware
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-2-jacek.lawrynowicz@linux.intel.com
|
|
Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
The new MFD_NOEXEC_SEAL and MFD_EXEC flags allows application to set
executable bit at creation time (memfd_create).
When MFD_NOEXEC_SEAL is set, memfd is created without executable bit
(mode:0666), and sealed with F_SEAL_EXEC, so it can't be chmod to be
executable (mode: 0777) after creation.
when MFD_EXEC flag is set, memfd is created with executable bit
(mode:0777), this is the same as the old behavior of memfd_create.
The new pid namespaced sysctl vm.memfd_noexec has 3 values:
0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_EXEC was set.
1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_NOEXEC_SEAL was set.
2: memfd_create() without MFD_NOEXEC_SEAL will be rejected.
The sysctl allows finer control of memfd_create for old-software that
doesn't set the executable bit, for example, a container with
vm.memfd_noexec=1 means the old-software will create non-executable memfd
by default. Also, the value of memfd_noexec is passed to child namespace
at creation time. For example, if the init namespace has
vm.memfd_noexec=2, all its children namespaces will be created with 2.
[akpm@linux-foundation.org: add stub functions to fix build]
[akpm@linux-foundation.org: remove unneeded register_pid_ns_ctl_table_vm() stub, per Jeff]
[akpm@linux-foundation.org: s/pr_warn_ratelimited/pr_warn_once/, per review]
[akpm@linux-foundation.org: fix CONFIG_SYSCTL=n warning]
Link: https://lkml.kernel.org/r/20221215001205.51969-4-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@google.com>
Co-developed-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/memfd: introduce MFD_NOEXEC_SEAL and MFD_EXEC", v8.
Since Linux introduced the memfd feature, memfd have always had their
execute bit set, and the memfd_create() syscall doesn't allow setting it
differently.
However, in a secure by default system, such as ChromeOS, (where all
executables should come from the rootfs, which is protected by Verified
boot), this executable nature of memfd opens a door for NoExec bypass and
enables “confused deputy attack”. E.g, in VRP bug [1]: cros_vm
process created a memfd to share the content with an external process,
however the memfd is overwritten and used for executing arbitrary code and
root escalation. [2] lists more VRP in this kind.
On the other hand, executable memfd has its legit use, runc uses memfd’s
seal and executable feature to copy the contents of the binary then
execute them, for such system, we need a solution to differentiate runc's
use of executable memfds and an attacker's [3].
To address those above, this set of patches add following:
1> Let memfd_create() set X bit at creation time.
2> Let memfd to be sealed for modifying X bit.
3> A new pid namespace sysctl: vm.memfd_noexec to control the behavior of
X bit.For example, if a container has vm.memfd_noexec=2, then
memfd_create() without MFD_NOEXEC_SEAL will be rejected.
4> A new security hook in memfd_create(). This make it possible to a new
LSM, which rejects or allows executable memfd based on its security policy.
This patch (of 5):
The new F_SEAL_EXEC flag will prevent modification of the exec bits:
written as traditional octal mask, 0111, or as named flags, S_IXUSR |
S_IXGRP | S_IXOTH. Any chmod(2) or similar call that attempts to modify
any of these bits after the seal is applied will fail with errno EPERM.
This will preserve the execute bits as they are at the time of sealing, so
the memfd will become either permanently executable or permanently
un-executable.
Link: https://lkml.kernel.org/r/20221215001205.51969-1-jeffxu@google.com
Link: https://lkml.kernel.org/r/20221215001205.51969-2-jeffxu@google.com
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Co-developed-by: Jeff Xu <jeffxu@google.com>
Signed-off-by: Jeff Xu <jeffxu@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We use station's MLD address to report disconnection of MLD station.
Update the documentation in multiple places to indicate this.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20221206080226.1702646-4-quic_vjakkam@quicinc.com
[update commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, maximum KCK key length supported for GTK rekey offload is 24
bytes but with some newer AKMs the KCK key length can be 32 bytes. e.g.,
00-0F-AC:24 AKM suite with SAE finite cyclic group 21. Add support to
allow 32 bytes KCK keys in GTK rekey offload.
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20221206143715.1802987-3-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Introduce NFT_MSG_DESTROY* message type. The destroy operation performs a
delete operation but ignoring the ENOENT errors.
This is useful for the transaction semantics, where failing to delete an
object which does not exist results in aborting the transaction.
This new command allows the transaction to proceed in case the object
does not exist.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
We will report extack message if there is an error via netlink_ack(). But
if the rule is not to be exclusively executed by the hardware, extack is not
passed along and offloading failures don't get logged.
In commit 81c7288b170a ("sched: cls: enable verbose logging") Marcelo
made cls could log verbose info for offloading failures, which helps
improving Open vSwitch debuggability when using flower offloading.
It would also be helpful if userspace monitor tools, like "tc monitor",
could log this kind of message, as it doesn't require vswitchd log level
adjusment. Let's add a new tc attributes to report the extack message so
the monitor program could receive the failures. e.g.
# tc monitor
added chain dev enp3s0f1np1 parent ffff: chain 0
added filter dev enp3s0f1np1 ingress protocol all pref 49152 flower chain 0 handle 0x1
ct_state +trk+new
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
Warning: mlx5_core: matching on ct_state +new isn't supported.
In this patch I only report the extack message on add/del operations.
It doesn't look like we need to report the extack message on get/dump
operations.
Note this message not only reporte to multicast groups, it could also
be reported unicast, which may affect the current usersapce tool's behaivor.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230113034353.2766735-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In cases where implicit sync is used, it is still useful (for things
like sub-allocation, etc) to allow userspace to opt-out of implicit
sync on per-BO basis.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/514216/
Link: https://lore.kernel.org/r/20221206192123.661448-1-robdclark@gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.3-2023-01-06:
amdgpu:
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Soft reset fix
- Allow 0 as a vram limit on APUs
- Display fixes
- Misc code cleanups
- Documentation fixes
- Handle profiling modes for SMU13.x
amdkfd:
- Error handling fixes
- PASID fixes
radeon:
- Switch 1 element arrays to flexible arrays
drm:
- Add DP adaptive sync DPCD definitions
UAPI:
- Add new INFO queries for peak and min sclk/mclk for profile modes on newer chips
Proposed mesa patch: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230106222037.7870-1-alexander.deucher@amd.com
|
