| Age | Commit message (Collapse) | Author |
|---|
|
With the split between tile and gt, this is currently unused.
Also it is bringing confusion because main vs remote would be
more a concept of the tile itself and not about GT.
So, the MAIN one is the traditional GT used for every operation
in older platforms, and for render/graphics and compute on platforms
that contains the stand-alone Media GT.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
num_params can be used to retrieve the size of the info array
for the specific version of the kernel being used.
v2: Also remove XE_QUERY_CONFIG_NUM_PARAM (José Roberto de Souza)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add conditional check for access counter granularity.
This check will return -EINVAL if granularity is beyond 64M
which is a hardware limitation.
v2: Defined
XE_ACC_GRANULARITY_128K 0
XE_ACC_GRANULARITY_2M 1
XE_ACC_GRANULARITY_16M 2
XE_ACC_GRANULARITY_64M 3
as part of uAPI.
So, that user can also use it.(Oak)
v3: Move uAPI to proper location and give proper
documentation.(Brian, Oak)
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Janga Rahul Kumar <janga.rahul.kumar@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is used for the priority of an exec queue (not an engine) and
should be named accordingly.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
During the uapi review it was identified a possible confusion
with the plural of acronym with a new acronym. So the
recommendation is to go with gt_list instead.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
We already have many bits reserved at the end already.
Let's kill the unused ones.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Let's have a single GT ID per GT within the PCI Device Card.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Split drm_xe_query_gt out of the gt list one in order to better
document it.
No functional change at this point. Any actual change to the
uapi should come in follow-up additions.
v2: s/maks/mask
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Async worker is gone. All jobs and memory allocations done in IOCTL to
align with dma fencing rules.
Async vs. sync now means when do bind operations complete relative to
the IOCTL. Async completes when out-syncs signal while sync completes
when the IOCTL returns. In-syncs and out-syncs are only allowed in async
mode.
If memory allocations fail in the job creation step the VM is killed.
This is temporary, eventually a proper unwind will be done and VM will
be usable.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is not used nor does it align VM async document, kill this.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This extension is currently not used and it is not aligned with
the error handling on async VM_BIND. Let's remove it and along with
that, since it was the only extension for the vm_create, remove VM
extension entirely.
v2: rebase on top of the removal of drm_xe_ext_exec_queue_set_property
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
There really is no difference between 'struct drm_xe_ext_vm_set_property'
and 'struct drm_xe_ext_exec_queue_set_property', they are extensions which
specify a <property, value> pair. Replace the two extensions with a single
common 'struct drm_xe_ext_set_property' extension. The rationale is that
rather than have each XE module (including future modules) invent their own
property/value extensions, all XE modules use a common set_property
extension when possible.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Functionality of XE_EXEC_QUEUE_SET_PROPERTY_COMPUTE_MODE deprecated in a
previous patch, drop from uAPI. The property is just simply inherented
from the VM.
v2:
- Update commit message (Niranjana)
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This was previously used in UMD for timestamp correlation, which can now
be done with DRM_XE_QUERY_CS_CYCLES.
Link: https://lore.kernel.org/all/20230706042044.GR6953@mdroper-desk1.amr.corp.intel.com/
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/636
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Use different members in the drm_xe_vm_bind_op for op and for flags as
it is done in other structures.
Type is left to u32 to leave enough room for future operations and flags.
v2: Remove the XE_VM_BIND_* flags shift (Rodrigo Vivi)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/303
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Perf measurements rely on CPU and engine timestamps to correlate
events of interest across these time domains. Current mechanisms get
these timestamps separately and the calculated delta between these
timestamps lack enough accuracy.
To improve the accuracy of these time measurements to within a few us,
add a query that returns the engine and cpu timestamps captured as
close to each other as possible.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24591
v2:
- Fix kernel-doc warnings (CI)
- Document input params and group them together (Jose)
- s/cs/engine/ (Jose)
- Remove padding in the query (Ashutosh)
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo finished the s/cs/engine renaming]
|
|
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The min_page_size is useful information to ensure alignment and it is
an API actually in use. However max_page_size doesn't bring any useful
information to the userspace hence being not used at all.
So, let's remove and only bring it back if that ever gets used.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
|
|
Fix typos, lingo and other small things identified during uapi
review.
v2: Also fix ALIGNMENT typo at xe_query.c
v3: Do not touch property to get/set. (Francois)
Link: https://lore.kernel.org/all/863bebd0c624d6fc2b38c0a06b63e468b4185128.camel@linux.intel.com/
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
|
|
Engine was inappropriately used to refer to execution queues and it
also created some confusion with hardware engines. Where it applies
the exec_queue variable name is changed to q and comments are also
updated.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/162
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Send uevent in case of gt reset failure. This intimation can be used by
userspace monitoring tool to do the device level reset/reboot
when GT reset fails. udevadm can be used to monitor the uevents.
v2:
- Support only gt failure notification (Rodrigo)
v3
- Rectify the comments in header file.
v4
- Use pci kobj instead of drm kobj for notification.(Rodrigo)
- Cleanup (Badal)
v5
- Add tile id and gt id as additional info provided by uevent.
- Provide code documentation for the uevent. (Rodrigo)
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This config is the only real one. If execlist remains in the
code it will forever be experimental and we shouldn't maintain
an uapi like that for that experimental piece of code that
should never be used by real users.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Mostly the same as i915. We add a new hint for userspace to force an
object into the mappable part of vram.
We also need to tell userspace how large the mappable part is. In Vulkan
for example, there will be two vram heaps for small-bar systems. And
here the size of each heap needs to be known. Likewise the used/avail
tracking needs to account for the mappable part.
We also limit the available tracking going forward, such that we limit
to privileged users only, since these values are system wide and are
technically considered an info leak.
v2 (Maarten):
- s/NEEDS_CPU_ACCESS/NEEDS_VISIBLE_VRAM/ in the uapi. We also no
longer require smem as an extra placement. This is more flexible,
and lets us use this for clear-color surfaces, since we need CPU access
there but we don't want to attach smem, since that effectively disables
CCS from kernel pov.
- Reject clear-color CCS buffers where NEEDS_VISIBLE_VRAM is not set,
instead of migrating it behind the scenes.
v3 (José):
- Split the changes that limit the accounting for perfmon_capable()
into a separate patch.
- Use XE_BO_CREATE_VRAM_MASK.
v4 (Gwan-gyeong Mun):
- Add some kernel-doc for the query bits.
v5:
- One small kernel-doc correction. The cpu_visible_size and
corresponding used tracking are always zero for non
XE_MEM_REGION_CLASS_VRAM.
v6:
- Without perfmon_capable() it likely makes more sense to report as
zero, instead of reporting as used == total size. This should give
similar behaviour as i915 which rather tracks free instead of used.
- Only enforce NEEDS_VISIBLE_VRAM on rc_ccs_cc_plane surfaces when the
device is actually small-bar.
Testcase: igt/tests/xe_query
Testcase: igt/tests/xe_mmap@small-bar
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Using jiffies as a timeout from userspace is weird even if
theoretically exists possiblity of acquiring jiffies via getconf.
Unfortunately this method is unreliable and the returned
value may vary from the one configured in the kernel config.
Now timeout is expressed in nanoseconds and its interpretation depends
on setting DRM_XE_UFENCE_WAIT_ABSTIME flag. Relative timeout (flag
is not set) means fence expire at now() + timeout. Absolute timeout
(flag is set) means that the fence expires at exact point of time.
Passing negative timeout means we will wait "forever" by setting
wait time to MAX_SCHEDULE_TIMEOUT.
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230628055141.398036-2-zbigniew.kempczynski@intel.com
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
./include/uapi/drm/xe_drm.h:263: warning: Function parameter or member
'gts' not described in 'drm_xe_query_gts'
./include/uapi/drm/xe_drm.h:854: WARNING: Inline emphasis start-string
without end-string.
With the idea to also include the uapi file in the pre-merge CI hooks
when building the kernel-doc, so first make sure it's clean:
https://gitlab.freedesktop.org/drm/xe/ci/-/merge_requests/16
v2: (Francois)
- It makes more sense to just fix the kernel-doc for 'gts'
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since we need to extend this, we should also take the time to add some
basic kernel-doc here for the existing bits. Note that this is all still
subject to change when upstreaming.
Also convert XE_MEM_REGION_CLASS_* into an enum, so we can more easily
create links to it from other parts of the uapi.
Suggested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Provide information on the types of topology masks that can be
queried and add some examples.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Align on same rule in the whole file: defines then doc then relevant
field, with an empty line to separate fields.
v2:
- Rebase on drm-xe-next
- Fix ordering of defines and fields in uAPI (Lucas De Marchi)
v3: Remove useless empty lines (Lucas De Marchi)
v4: Move changelog to commit
v5: Rebase
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Link: https://lists.freedesktop.org/archives/intel-xe/2023-May/004704.html
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This adds documentation to the various structures used to query
memory, GTs, topology, engines, and so on. It includes a functional
code snippet to query engines.
v2:
- Rebase on drm-xe-next
- Also document structures related to drm_xe_device_query, changed
pseudo code to snippet (Lucas De Marchi)
v3:
- Move changelog to commit
- Fix warnings showed only using dim checkpath
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Link: https://lists.freedesktop.org/archives/intel-xe/2023-May/004704.html
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add uAPI and implementation for NULL bindings. A NULL binding is defined
as writes dropped and read zero. A single bit in the uAPI has been added
which results in a single bit in the PTEs being set.
NULL bindings are intendedd to be used to implement VK sparse bindings,
in particular residencyNonResidentStrict property.
v2: Fix BUG_ON shown in VK testing, fix check patch warning, fix
xe_pt_scan_64K, update __gen8_pte_encode to understand NULL bindings,
remove else if vma_addr
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We should't be depending on time.h; we should only be pulling in other
uapi headers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Patch series "kexec_file: print out debugging message if required", v4.
Currently, specifying '-d' on kexec command will print a lot of debugging
informationabout kexec/kdump loading with kexec_load interface.
However, kexec_file_load prints nothing even though '-d' is specified.
It's very inconvenient to debug or analyze the kexec/kdump loading when
something wrong happened with kexec/kdump itself or develper want to check
the kexec/kdump loading.
In this patchset, a kexec_file flag is KEXEC_FILE_DEBUG added and checked
in code. If it's passed in, debugging message of kexec_file code will be
printed out and can be seen from console and dmesg. Otherwise, the
debugging message is printed like beofre when pr_debug() is taken.
Note:
****
=====
1) The code in kexec-tools utility also need be changed to support
passing KEXEC_FILE_DEBUG to kernel when 'kexec -s -d' is specified.
The patch link is here:
=========
[PATCH] kexec_file: add kexec_file flag to support debug printing
http://lists.infradead.org/pipermail/kexec/2023-November/028505.html
2) s390 also has kexec_file code, while I am not sure what debugging
information is necessary. So leave it to s390 developer.
Test:
****
====
Testing was done in v1 on x86_64 and arm64. For v4, tested on x86_64
again. And on x86_64, the printed messages look like below:
--------------------------------------------------------------
kexec measurement buffer for the loaded kernel at 0x207fffe000.
Loaded purgatory at 0x207fff9000
Loaded boot_param, command line and misc at 0x207fff3000 bufsz=0x1180 memsz=0x1180
Loaded 64bit kernel at 0x207c000000 bufsz=0xc88200 memsz=0x3c4a000
Loaded initrd at 0x2079e79000 bufsz=0x2186280 memsz=0x2186280
Final command line is: root=/dev/mapper/fedora_intel--knightslanding--lb--02-root ro
rd.lvm.lv=fedora_intel-knightslanding-lb-02/root console=ttyS0,115200N81 crashkernel=256M
E820 memmap:
0000000000000000-000000000009a3ff (1)
000000000009a400-000000000009ffff (2)
00000000000e0000-00000000000fffff (2)
0000000000100000-000000006ff83fff (1)
000000006ff84000-000000007ac50fff (2)
......
000000207fff6150-000000207fff615f (128)
000000207fff6160-000000207fff714f (1)
000000207fff7150-000000207fff715f (128)
000000207fff7160-000000207fff814f (1)
000000207fff8150-000000207fff815f (128)
000000207fff8160-000000207fffffff (1)
nr_segments = 5
segment[0]: buf=0x000000004e5ece74 bufsz=0x211 mem=0x207fffe000 memsz=0x1000
segment[1]: buf=0x000000009e871498 bufsz=0x4000 mem=0x207fff9000 memsz=0x5000
segment[2]: buf=0x00000000d879f1fe bufsz=0x1180 mem=0x207fff3000 memsz=0x2000
segment[3]: buf=0x000000001101cd86 bufsz=0xc88200 mem=0x207c000000 memsz=0x3c4a000
segment[4]: buf=0x00000000c6e38ac7 bufsz=0x2186280 mem=0x2079e79000 memsz=0x2187000
kexec_file_load: type:0, start:0x207fff91a0 head:0x109e004002 flags:0x8
---------------------------------------------------------------------------
This patch (of 7):
When specifying 'kexec -c -d', kexec_load interface will print loading
information, e.g the regions where kernel/initrd/purgatory/cmdline are
put, the memmap passed to 2nd kernel taken as system RAM ranges, and
printing all contents of struct kexec_segment, etc. These are very
helpful for analyzing or positioning what's happening when kexec/kdump
itself failed. The debugging printing for kexec_load interface is made in
user space utility kexec-tools.
Whereas, with kexec_file_load interface, 'kexec -s -d' print nothing.
Because kexec_file code is mostly implemented in kernel space, and the
debugging printing functionality is missed. It's not convenient when
debugging kexec/kdump loading and jumping with kexec_file_load interface.
Now add KEXEC_FILE_DEBUG to kexec_file flag to control the debugging
message printing. And add global variable kexec_file_dbg_print and macro
kexec_dprintk() to facilitate the printing.
This is a preparation, later kexec_dprintk() will be used to replace the
existing pr_debug(). Once 'kexec -s -d' is specified, it will print out
kexec/kdump loading information. If '-d' is not specified, it regresses
to pr_debug().
Link: https://lkml.kernel.org/r/20231213055747.61826-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20231213055747.61826-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
|
|
Currently, the 'state' field in 'struct br_port_msg' can be set to 1 if
the MDB entry is permanent or 0 if it is temporary. Additional states
might be added in the future.
In a similar fashion to 'NDA_NDM_STATE_MASK', add an MDB state mask uAPI
attribute that will allow the upcoming bulk deletion API to bulk delete
MDB entries with a certain state or any state.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix spacing, alignment, and repeated words in the documentation.
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Move the definition of drm_xe_engine_class_instance to group it with
other engine related structs and to follow the ioctls order.
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Replace the license text with its SPDX-License-Identifier for
quick identification of the license and consistency with the
rest of the driver.
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since memory and address spaces are a tile concept rather than a GT
concept, we need to plumb tile-based handling through lots of
memory-related code.
Note that one remaining shortcoming here that will need to be addressed
before media GT support can be re-enabled is that although the address
space is shared between a tile's GTs, each GT caches the PTEs
independently in their own TLB and thus TLB invalidation should be
handled at the GT level.
v2:
- Fix kunit test build.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pad the uAPI definition so that it would align identically between
64-bit and 32-bit uarch, so consumers using this header will work
correctly from 32-bit compat userspace on a 64-bit kernel. Do it
in a minimally invasive way, so that 64-bit userspace will still
work with the previous header, and so that no fields suddenly
change sizes.
Originally inspired by mlankhorst.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Intel Vulkan driver needs to know what is the maximum priority to fill
a device info struct for applications.
Right now we getting this information by creating a engine and setting
priorities from min to high to know what is the maximum priority for
running process but this leads to info messages to be printed to
dmesg:
xe 0000:03:00.0: [drm] Ioctl argument check failed at drivers/gpu/drm/xe/xe_engine.c:178: value == DRM_SCHED_PRIORITY_HIGH && !capable(CAP_SYS_NICE)
It does not cause any harm but when executing a test suite like
crucible it causes thousands of those messages to be printed.
So here adding one more property to drm_xe_query_config to fetch the
max engine priority.
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
All structs and defines had already been renamed to "xe", but some
comments with "i915" were left over. Rename them.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20230313211628.2492587-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is intended to get some properties that are of interest of UMDs
like the ban state.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Engine property get uAPI will be added, so to avoid ambiguity here
renaming XE_ENGINE_PROPERTY_X to XE_ENGINE_SET_PROPERTY_X.
No changes in behavior.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.8:
Core:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
on register write
- Kconfig fix for QMP dependency
- DT schema fixes
DPU:
- Add support for SDM670, SM8650
- Enable SmartDMA on SM8350 and SM8450
- Correct UBWC settings for SC8280XP
- Fix catalog settings for SC8180X
- Actually make use of the version to switch between QSEED3/3LITE/4
scalers
- Use devres-managed and drm-managed allocations where appropriate
- misc other fixes
- Enabled YUV writeback on SC7280, SM8250
- Enabled writeback on SM8350, SM8450
- CRC fix when encoder is selected as the input source
- other misc fixes
MDP4:
- Use devres-managed and drm-managed allocations where appropriate
- flush vblank event on CRTC disable
MDP5:
- Use devres-managed and drm-managed allocations where appropriate
DP:
- Add support for SM8650
- Enable PM runtime support
- Merge msm-specific debugfs dir with the generic one
- Described DisplayPort on SM8150 in DeviceTree bindings
- Moved dp_display_get_next_bridge() to probe()
DSI:
- Add support for SM8650
- Enable PM runtime support
GPU/GEM:
- demote userspace triggerable warnings to debug
- add GEM object metadata UAPI
- move GPU devcoredumps to GPU device
- fix hangcheck to skip retired submits
- expose UBWC config to userspace
- fix a680 chip-id
- drm_exec conversion
- drm/ci: remove rebase-merge directory (to unblock CI)
[airlied: fix drm_exec/amd interaction]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs9auYqmo-7NSd9FsbNBCDf7aBevd=4xkcF3A5G_OGvMQ@mail.gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.8-2023-12-15:
amdgpu:
- Suspend fixes
- Misc code cleanups
- JPEG fix
- Add AMD specific color management (protected by AMD_PRIVATE_COLOR)
- UHBR13.5 cable fixes
- Misc display fixes
- Display WB fixes
- PSR fixes
- XGMI fix
- ACPI WBRF support for handling potential RF interference from GPU clocks
- Enable tunneling on high priority compute queues
- drm_edid.h include cleanup
- VPE DPM support
- SMU 13 fixes
- Fix possible double frees in error paths
- Misc fixes
amdkfd:
- Support import and export of dma-bufs using GEM handles
- MES shader debugger fixes
- SVM fixes
radeon:
- drm_edid.h include cleanup
- Misc code cleanups
- Fix possible memory leak in error path
drm:
- Increase max objects to accomodate new color props
- Make replace_property_blob_from_id a DRM helper
- Track color management changes per plane
platform-x86:
- Merge immutable branch from Hans for platform dependencies for WBRF to coordinate
merge of WBRF feature across wifi, platform, and GPU
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZXygTgAKCRC93/aFa7yZ
# 2EW1AQCILfGTtDWXzgLSpUBtt9jOooHqaSrah19Cfw0HlA3QIQD+OCohXH1LLZo1
# tYHyfsLv0LsNawI198qABzB1PwptSAI=
# =M1AO
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 16 Dec 2023 04:51:58 AEST
# gpg: using EDDSA key 203B921D836B5735349902BDBDDFF6856BBC99D8
# gpg: Can't check signature: No public key
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215193519.5040-1-alexander.deucher@amd.com
|
|
|
|
Introduces admin commands, as follow:
The "list query" command can be used by the driver to query the
set of admin commands supported by the virtio device.
The "list use" command is used to inform the virtio device which
admin commands the driver will use.
The "legacy common cfg rd/wr" commands are used to read from/write
into the legacy common configuration structure.
The "legacy dev cfg rd/wr" commands are used to read from/write
into the legacy device configuration structure.
The "notify info" command is used to query the notification region
information.
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20231219093247.170936-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Add support for sending admin command through admin virtqueue interface.
Abort any inflight admin commands once device reset completes. Activate
admin queue when device becomes ready; deactivate on device reset.
To comply to the below specification statement [1], the admin virtqueue
is activated for upper layer users only after setting DRIVER_OK status.
[1] The driver MUST NOT send any buffer available notifications to the
device before setting DRIVER_OK.
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20231219093247.170936-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Introduce support for the admin virtqueue. By negotiating
VIRTIO_F_ADMIN_VQ feature, driver detects capability and creates one
administration virtqueue. Administration virtqueue implementation in
virtio pci generic layer, enables multiple types of upper layer
drivers such as vfio, net, blk to utilize it.
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20231219093247.170936-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Introduce VIRTIO_F_ADMIN_VQ which is used for administration virtqueue
support.
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20231219093247.170936-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
