| Age | Commit message (Collapse) | Author |
|---|
|
To separate the coredump header and data far more easily, give a
vendor driver the option to pad its header to a fixed size, by
moving the header size limit and ending marker to coredump.h:
- HCI_DEVCD_HDR_SIZE_MAX: the max header size
- HCI_DEVCD_HDR_END_MARKER: the header-ending marker
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add context analysis annotations for hci_conn::l2cap_data locking.
Also add necessary lockdep_assert_held() and __must_hold annotations
to prove the access is safe.
The access in smp_conn_security() is supposed to be guarded by the
caller holding lock that blocks concurrent l2cap_conn_del() eg.
hdev->lock, conn->lock or chan->lock. Mark unsafe as can't be
automatically checked now.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add MGMT_OP_LOAD_CONN_SUBRATE (0x005C) command to load per-device
connection subrate parameters when the SCI feature is supported.
Add MGMT_EV_CONN_SUBRATE (0x0033) event to notify userspace when
connection rate changes occur via the LE Connection Rate Change HCI
event.
Add subrate fields (subrate_min, subrate_max, max_latency, cont_num)
to struct hci_conn_params to store the loaded subrate parameters, and
the corresponding le_rate_* fields to struct hci_conn to track the
parameters currently in use.
When a single entry is loaded for an already-connected central, or on
connection completion, the LE Connection Rate Request procedure is
initiated to apply the parameters.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add MGMT_SETTING_SCI (bit 25) to advertise support for the Shorter
Connection Interval (SCI) feature. It is reported in the supported
settings whenever the controller is SCI capable, and in the current
settings whenever LE is enabled and the controller is SCI capable
(SCI has no separate enable command, so it is a passive capability).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add HCI command, event and feature bit definitions for the Bluetooth
6.2 Shorter Connection Interval feature:
Commands:
- HCI_OP_LE_CONN_RATE (0x20a1) - Connection Rate Request
- HCI_OP_LE_SET_DEF_RATE (0x20a2) - Set Default Rate Parameters
- HCI_OP_LE_READ_CONN_INTERVAL (0x20a3) - Read Min Supported
Connection Interval
Events:
- HCI_EVT_LE_CONN_RATE_CHANGE (0x37) - Connection Rate Change
Feature bits:
- HCI_LE_SCI - Shorter Connection Intervals
- HCI_LE_SCI_HOST - Shorter Connection Intervals (Host Support)
During controller init, when SCI is supported:
- Set Shorter Connection Intervals (Host Support) feature via
LE Set Host Feature
- Read Minimum Supported Connection Interval
- Set Default Rate Parameters
The Connection Rate Change event handler updates the connection
interval, latency and supervision timeout on the hci_conn.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Introduce both helpers for ACL packet since:
both core and transport drivers extract the handle and data length
from its header in several places.
Both will be used later.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Introduce hci_devcd_state_name() to describe the devcoredump state by a
string name instead of a plain number, for several reasons:
1) Applying it in coredump.c makes the devcoredump state in log messages
more readable than a plain number.
2) Transport drivers may need to show the devcoredump state name too.
3) In future, the universal state name could be notified to userspace
via uevent, allowing a universal application (e.g. a daemon) to be
developed to save the coredump, which is otherwise discarded by the
device coredump core after 5 minutes (DEVCD_TIMEOUT); see
nxp_coredump_notify().
Also drop a trailing space from two bt_dev_dbg() format strings while
applying it in coredump.c.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Several vendor drivers have a requirement to send a synchronous raw HCI
reset with HCI_INIT_TIMEOUT.
Add a dedicated __hci_reset_sync() for them to use.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_cmd_sync_dequeue_once() had a single in-tree caller,
hci_cancel_connect_sync(), which now holds cmd_sync_work_lock across the
in-flight create flag test and the dequeue and so open-codes the lookup
and cancel under that lock. That leaves the exported
hci_cmd_sync_dequeue_once() with no in-tree user, so remove it along with
its declaration.
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Quite a bunch more work, of note:
- iwlwifi: new FW version support
- mt76:
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- rtw89:
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- ath12k: AHB platform MultiPD support
- cfg80211: pre-assign cookies for operations
- mac80211: AQL support for multicast
* tag 'wireless-next-2026-08-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (403 commits)
wifi: nxpwifi: bound uAP association event IEs to the event buffer
wifi: nxpwifi: detach sync command buffer on interrupted wait
wifi: brcmfmac: Fix memory leak in brcmf_sdio_read_control()
wifi: rsi: Fix types to appease CFI
wifi: mac80211: skip default WMM setup for AP_VLAN links
wifi: nxpwifi: fix multiple static analysis errors and warnings
wifi: morsemicro: MM81X should be invisible and selected by its users
wifi: nxp: NXPWIFI should be invisible and selected by its users
wifi: cfg80211: stop PMSR before P2P and NAN teardown
wifi: mac80211: disconnect on CSA to channel 0
wifi: brcmfmac: fix P2P action frame handling without device vif
wifi: brcmfmac: Set DMA direction for msgbuf packet IDs
wifi: brcmfmac: validate msgbuf flowring IDs before use
wifi: mac80211: fix RCU usage in peer probing
wifi: mac80211: fix RCU dereference in throughput estimate
wifi: wilc1000: validate monitor transmit frame headers
wifi: mac80211: skip unused probe response countdown offsets
wifi: zd1211rw: reject secondary interfaces to prevent conflicts
wifi: nl80211: clean up color-change beacon data on errors
wifi: mac80211: send TWT teardown to peer after setup TX failure
...
====================
Link: https://patch.msgid.link/20260806121304.190084-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc7).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zijie Huang <milkory@outlook.com>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/1e9ab39597423fd5d13cfaaf52279b8ee3d9fc3c.1785434373.git.milkory@outlook.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The vport-vxlan in openvswitch was the last user and it is now gone.
And we can now rename the internal function to have a better name.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260804182049.2289754-7-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The only user was vport-gre in openvswitch and now it is gone.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260804182049.2289754-6-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The only user was vport-geneve in openvswitch and now it is gone.
This also removes the last exported function in geneve module,
significantly reducing complexity of the locking analysis.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260804182049.2289754-5-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Partial pull of the nf-26-07-31 tag
Pablo says:
====================
The following patchset contains Netfilter/IPVS fixes net, this
includes fixes for ebtables nflog target, ipset hash type,
IPVS kthread estimator
1) Prevent IPVS kthread estimator from draining the est_temp_list
when netns is being dismantled. From Zhiling Zou.
2) Missing module nflog refcount bump from ebtables nflog target from
.checkentry path. Similar dependency exists already in xt_NFLOG and
nft_log. From Chengfeng Ye.
3) Use RCU to fix ipset bookkeeping of cidr values on weakly-ordered
architectures. From Jozsef Kadlecsik.
4) Use atomic64_t for set->ext_size in ipset to fix parallel inserts
and deletes racing on updating it. From Jozsef Kadlecsik.
5) Add small wrappers for hash and bucket size to prepare the update
of ipset hash set types to rhashtable, from Florian Westphal.
6) Add mtype_del_cidr_all() and use it to prepare the migration of
ipset hash types to rhashtable. From Florian Westphal.
7) Replace existing ipset call_rcu() based destruction with rcu_work
api also to ease the transition to rhashtable. Also from Florian.
8) Avoid reading the IPv4 ihl field multiple times to prevent local
attacker to cause out-of-bounds write in ip_vs_nat_icmp(), from
Julian Anastasov.
9) Restore the checksum validations that could be needed by the IPVS
FORWARD hook. Also from Julian.
====================
Link: https://patch.msgid.link/20260731151806.849724-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits.
Fixes: 8814c4b53381 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260803122758.666112-1-david.lee@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On some ARM64 platforms with 4K PAGE_SIZE, page_pool fragment
allocation in the RX refill path can cause 15-20% throughput
regression under high connection counts (>16 TCP streams).
Add an ethtool private flag "full-page-rx" that allows the user to
force one RX buffer per page, bypassing the page_pool fragment path.
This restores line-rate (180+ Gbps) performance on affected platforms.
Usage:
ethtool --set-priv-flags eth0 full-page-rx on
There is no behavioral change by default. The flag must be explicitly
enabled by the user or udev rule.
The existing single-buffer-per-page logic for XDP and jumbo frames is
consolidated into a new helper mana_use_single_rxbuf_per_page() which
is now the single decision point for both the automatic and
user-controlled paths.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20260729063347.3388035-3-dipayanroy@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The zero-copy path validates TX metadata while obtaining the descriptor
context, then reads it again later when preparing the hardware request.
User space can change the metadata between those operations and bypass the
original validation.
Validate the metadata in xsk_tx_metadata_request() and use the resulting
flags snapshot for every feature check. Read request fields once so all
zero-copy drivers process only values observed after successful
validation.
Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xsk_tx_metadata_request() must validate metadata with
xsk_buff_valid_tx_metadata(), which is defined in xdp_sock_drv.h. Move the
helper there before adding that dependency. All callers already include
the destination header, so this has no functional effect.
Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Launch-time metadata extends beyond the first 16 bytes of struct
xsk_tx_metadata. Reject the request when the registered metadata area does
not contain the complete field.
Snapshot the validated flags for the generic transmit path and use that
snapshot for request and completion processing, avoiding inconsistent
decisions if user space changes the flags concurrently.
Note that only xsk_skb_metadata is properly using the flags,
__xsk_buff_get_metadata ignores them. Next commits address that.
Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
User space can change metadata flags after request processing. Rereading
them during completion can therefore make the kernel write a timestamp
that was not requested when the packet was submitted.
Clear the metadata pointer during request processing unless timestamp
completion is requested. Completion handling can then use the pointer
itself instead of rereading the flags.
On the mlx5 multi-packet WQE path metadata is evaluated per batch:
xsk_tx_metadata_request() runs only for the descriptor that starts a
session, just like the checksum offload that is applied once through the
shared WQE. Only that descriptor's pointer is reset, so completion
handling can record a timestamp for the other descriptors of the session
regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays
inside the metadata area; the single-WQE, other zero-copy, and generic
paths reset the pointer per descriptor and are unaffected.
Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Completion handling needs to know whether a timestamp was requested when
the metadata was processed. Let xsk_tx_metadata_request() update the
caller's metadata pointer so that decision can be carried forward without
rereading user-controlled flags.
This only changes the interface; behavior remains unchanged.
Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tx_control_port op was excluded from the previous commit because
a NULL cookie was affecting different behavior, ie. signalling that
no TX status is wanted.
Since cfg80211_assign_cookie() guarantees a non-zero value, cookie value
0 can be used instead. So pass 0 when dont_wait_for_ack is set, otherwise
pass value returned from cfg80211_assign_cookie() call.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-13-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The remain_on_channel, mgmt_tx, and probe_peer ops previously used
a u64 *cookie output parameter. Now that cfg80211 pre-assigns the
cookie value before invoking drivers, the parameter conveys a value
from caller to driver, not the other way around. Convert it to a
plain u64 input parameter across the ops struct (cfg80211.h),
rdev-ops.h wrappers, nl80211.c/mlme.c call sites, mac80211, and
all driver implementations.
The tx_control_port op is excluded: its cookie pointer is nullable
(passed as NULL when dont_wait_for_ack is set), so the nullable
pointer semantics are still required.
Internal mac80211 helpers ieee80211_start_roc_work() and
ieee80211_attach_ack_skb() still take u64 *cookie because they
assign to the pointee; their callers now pass &cookie to take the
address of the local value parameter.
wil6210's internal wil_p2p_listen() is also updated to take u64
cookie since it is called directly from the remain_on_channel
callback.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-12-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Having a single place for cookie assignment and keeping that
responsibility in the cfg80211 subsystem is a logical choice as it
handles the userspace nl80211 API. add_nan_func already does this:
cfg80211 calls cfg80211_assign_cookie() before invoking the driver.
Apply the same pattern to remain_on_channel, mgmt_tx, probe_peer and
tx_control_port by pre-assigning the cookie in the nl80211 command
handlers before the rdev_* call. For tx_control_port the cookie is
only pre-assigned when the caller requests an ack (cookie pointer
non-NULL).
Drivers may still overwrite the value for now; subsequent patches will
remove per-driver cookie generation.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
KSZ8463 uses the KSZ9893 DSA TAG driver. However, the KSZ8463 doesn't
use the tail tag to convey timestamps to the host as KSZ9893 does. It
uses the reserved fields in the PTP header instead.
Add a KSZ8463-specific DSA_TAG driver to handle KSZ8463 timestamps.
There is no information in the tail tag to distinguish PTP packets from
others so use the ptp_classify_raw() helper to find the PTP packets and
extract the timestamp from their PTP headers.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260727-ksz-new-ptp-v3-8-caba39e680e3@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sashiko notes that playing games with the skb dst and rt
flags instead of providing hooknum is not a good idea
when validating the checksums.
Also, skipping checksum validation for FORWARD packets
risk silent data corruption, even if the only user is
the FTP-CMD packets coming from the real server.
Sashiko also noticed that by using common checksum
helper in the previous commit we actually fixed old bug
where the TCP/UDP checksum for IPv6 on CHECKSUM_COMPLETE
was not validated correctly.
Fixes: e876b75b9020 ("ipvs: fix the checksum validations")
Link: https://sashiko.dev/#/patchset/20260722211420.153933-1-pablo%40netfilter.org
Link: https://sashiko.dev/#/patchset/20260727185024.67534-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260728202520.59179-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.
Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.
Modify some IPv4 header checks by reading the ihl field
only once.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260722101517.36313-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When an fdb entry points at a nexthop group, vxlan_fdb_nh_path_select()
resolves the selected leg's remote IP but leaves the UDP destination port
at the device default (vxlan->cfg.dst_port).
Extend nexthop_path_fdb_result() to also return the selected nexthop's
NHA_DST_PORT (0 when unset) and have vxlan_fdb_nh_path_select() store it
in rdst->remote_port. vxlan_xmit_one() already prefers rdst->remote_port
when non-zero and falls back to the device port otherwise, so nexthops
without a port are unaffected.
This lets one fdb nexthop group load-balance a flow across legs that
share an underlay IP but differ in UDP destination port.
Signed-off-by: Jack Ma <jack4it@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260724-b4-vxlan-fdb-port-v5-2-cd1c6aeee058@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") lets a
single inner MAC be reached through a group of remote VTEPs, with the
kernel flow-hashing across the group members. Each member carries its
own remote IP, but the UDP destination port is always taken from the
VXLAN device (vxlan->cfg.dst_port) and cannot be set per member.
Some deployments pack several receivers behind one underlay IP and tell
them apart by UDP port, so they need a per-nexthop destination port to
spread flows across (IP, port) tuples rather than IP alone.
Add a netlink attribute NHA_DST_PORT (__be16, mirroring NDA_PORT) that
carries an optional UDP destination port on an fdb nexthop. It is only
accepted together with NHA_FDB and NHA_GATEWAY; it is stored in struct
nh_info and echoed back on dump. The attribute is named generically
rather than fdb-specific so it can be reused should another nexthop type
ever need a destination port. This patch is control-plane plumbing
only; the VXLAN datapath is wired up in a follow-up patch, so behaviour
is unchanged for now.
Signed-off-by: Jack Ma <jack4it@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260724-b4-vxlan-fdb-port-v5-1-cd1c6aeee058@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc6).
No conflicts.
Adjacent changes:
net/ipv4/route.c
dbc3791e3b24 ("net: do not send ICMP/NDISC Redirects when peer allocation fails")
7804eaa057fe ("ipv4: snapshot dst.dev in ip_rt_send_redirect() and ip_rt_get_source()")
drivers/net/tun.c
23dad2d088df ("tun: no longer rely on RTNL in tun_fill_info()")
c3da92af07ea ("Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"")
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
3bd438a58e91 ("octeontx2-af: Block VFs from clobbering special CGX PKIND state")
5ba5611ef946 ("octeontx2-af: reserve 4 PKINDs for skip-size custom use")
drivers/net/wireless/ath/ath12k/core.h
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/peer.c
469d7e6077c1 ("wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event")
378e659029d5 ("wifi: ath12k: introduce host_alloc_ml_id hardware parameter")
c42b27336eef ("wifi: ath12k: fix survey indexing across bands")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clarify the re-parenting expectations. Specifically that @delete
on a queue removes it from the hierarchy which is a bit unusual
in the overall API structure.
IIRC the implicit delete behavior was introduced because otherwise
it would not be possible to remove a queue from the hierarchy
without changing at least one handle of the shapers. Normally
"removal" is done by "adding" to the new parent, but "outside
the hierarchy" does not have a parent we can point at.
Link: https://patch.msgid.link/20260724210756.1553565-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The shaper API takes some getting used to. Try to improve
the doc on struct net_shaper_ops to help driver developers.
Link: https://patch.msgid.link/20260724210756.1553565-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is true that the user-facing group() operation can only
be invoked with queues as leaves (see net_shaper_parse_leaf()),
but the driver facing op is also called when we delete a node.
When we delete a node we conceptually call
group(parent, node.list_of_leaves)
to add node's leaves to the parent. Node deletion "mid-hierarchy"
is supported so some of the leaves may themselves be nodes.
Therefore the driver facing group() may be called with nodes.
Remove the incorrect comment, and add a comment about differences
between the Netlink API and driver facing API.
Link: https://patch.msgid.link/20260724210756.1553565-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data.
Fixes: dc26097bdb86 ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add a function to allow drivers to query the pending AQL airtime
for a given txq, for both unicast and broadcast.
This will be used for mt76 to limit buffering in AP mode for power-save
stations.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260724115429.3921457-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Excessive multicast traffic with little competing unicast traffic can easily
flood hardware queues, leading to throughput issues. Additionally, filling
the hardware queues with too many packets breaks FQ for multicast data.
Fix this by enabling AQL for multicast packets.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260724115429.3921457-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ie_len field in struct mesh_setup stores the length of the
information elements (IEs) buffer. It is currently defined as u8,
which limits the maximum supported length to 255 bytes.
The IE length is derived from memory buffers whose size is naturally
represented by size_t. Using u8 may truncate larger values and can
result in incorrect length handling.
Change ie_len to size_t so it can represent the full buffer length and
match the type commonly used for memory sizes throughout the kernel.
Signed-off-by: Ramakrishnan Rathinasamy <ramakrishnan@aerlync.com>
Signed-off-by: Srinivas Achary <srinivas@aerlync.com>
Link: https://patch.msgid.link/20260723134550.35167-1-srinivas@aerlync.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next,
just a small batch with accumulated pending updates:
1) In IPVS, use system_dfl_long_wq instead of system_long_wq, from
Ismael Luceno.
2) Add missing .checkentry in xt_tcpmss for IPv6, this is a follow up
to a recent harderning, from Florian Westphal.
3) Address a sashiko report in the NAT SIP helper, from Florian Westphal.
4) Tear down flow entries with stale routes using the GC, this is to
detect route updates when hardware offload is enabled.
5) Pass master conntrack as parameter to functions instead of using
exp->master as preparation work to turn exp->master into a cookie.
6) Move expectation event_mask to the nf_conntrack_expect object,
again as preparation work to turn exp->master into a cookie.
7) In IPVS, use kzalloc_obj{s}() typesafe allocations, from Subasri S.
* tag 'nf-next-26-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
ipvs: use type-safe allocation helpers in ip_vs_rht_alloc
netfilter: nf_conntrack_expect: store event cache in expectation
netfilter: conntrack_helper: pass master conntrack to helper functions
netfilter: flowtable: tear down flow entries with stale dst from GC
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
netfilter: xt_tcpmss: extend checkentry to ipv6
ipvs: Move defense_work and est_reload_work to system_dfl_long_wq
====================
Link: https://patch.msgid.link/20260724104932.437729-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless-next-2026-07-26
Mostly driver changes this time:
- new driver mm81x for an S1G device
- new driver nxpwifi for NXP devices
(mostly forked off from mwifiex)
- ath12k: much kernel infrastructure integration work
- brcmfmac: DPP support, some Cypress part update
- nl80211: per-link statistics support
====================
Link: https://patch.msgid.link/20260726105205.942922-60-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New HW no longer implements a separate class for latency-sensitive QPs
and advertises this by a new cap bit.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net. This batch
includes a mix of IPVS follow ups related to Sashiko reports, as well as
crash fixes for connection tracking expectation, helpers, ipset and
nf_tables mostly for old bugs. This also includes a fix for the
flowtable tunnel selftest.
1) Use s32 instead of s16 to calculate the remaining payload containing
SIP messages, otherwise underflow is possible allowing out-of-bound
memory access beyond the skb->data area. From Xiang Mei.
2) Fix the counter check in the flowtable selftest for tunnels, from
Lorenzo Bianconi.
3) Add and use nf_ct_expect_related_pair() to add the RTP and RTCP
expectations under the expectation lock, this is required by the SIP
and H.323 NAT helpers. This fixes a possible reinsertion of an
expectation with the DEAD flag set on while looping to find
consecutive ports.
4) Fix ipset UaF during table resize by blocking comment updates on
kernel-side adds. From David Lee.
5) Do not propagate the IP_VS_CONN_F_ONE_PACKET flag when using IPVS
state synchronization, otherwise reaching stale freed from
ip_vs_conn struct is possible, Zhiling Zou.
6) Adjust the hn1 hash node when the forwarding method changes between
MASQ and non-MASQ for an already hashed connection. This can leave
stale hash nodes pointing to a freed struct ip_vs_conn and trigger
UaF while reading /proc/net/ip_vs_conn. From Julian Anastasov.
7) nft_object rhltable needs to be per table, just like chain rhltable,
otherwise UaF from object lookup path while netns is being released.
There is also the nlevent path that can reach stale objects. Placing
this rhltable under the table hierarchy fixes this issue.
8) Reject invalid combined usage of hashlimit tables with and without
XT_HASHLIMIT_RATE_MATCH flag mode, otherwise access to uninitialized
.burst field of dsthash_ent is possible.
9) Fix checksum validations in IPVS performed from LOCAL_IN,
from Julian Anastasov.
10) Fix incorrect packet offset to layer 4 protocol in IPVS, uncovered
by Sashiko, from Julian Anastasov.
11) Skip the mangling of ICMP replies for non-first fragments, also
reported by Sashiko. Also from Julian.
12) Clear ip_vs_conn flags under the spinlock to fix a possible data
race. From Julian Anastasov.
13) Fix incorrect calculation of the payload bitmask in the nf_tables
hardware offload support, leading to UBSAN splat. From Xiang Mei.
* tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix mask build for partial field offload
ipvs: clear the nfct flag under lock
ipvs: do not mangle ICMP replies for non-first fragments
ipvs: fix places with wrong packet offsets
ipvs: fix the checksum validations
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
netfilter: nf_tables: make nft_object rhltable per table
ipvs: adjust double hashing when fwd method changes
ipvs: do not propagate one-packet flag to synced conns
netfilter: ipset: do not update comments from kernel-side hash adds
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
====================
Link: https://patch.msgid.link/20260723163910.274695-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The zero-copy Tx batch parser stops when it encounters an invalid
descriptor. If this happens after one or more continuation descriptors,
the Tx consumer can be advanced past fragments that are neither submitted
to the driver nor returned to userspace through the completion ring.
A similar problem occurs when a packet exceeds xdp_zc_max_segs. The
descriptors consumed up to the limit are released without completion, and
the remaining continuation descriptors can subsequently be interpreted
as the beginning of another packet.
Parse Tx batches in packet units and distinguish descriptors belonging to
complete valid packets from descriptors consumed while draining an
invalid or oversized packet. Return the former to the driver and append
the latter to the CQ address area so userspace can reclaim their UMEM
frames.
Treat a standalone invalid descriptor as a one-descriptor reclaim-only
packet. Advancing the Tx-ring consumer releases the ring slot, but does
not by itself return ownership of the referenced UMEM frame to userspace.
Once draining starts, continue until the packet's end-of-packet
descriptor is consumed. Preserve the drain state on the socket when EOP
has not yet been supplied, so draining can continue during a later call.
Leave incomplete but otherwise valid packets on the Tx ring.
Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing.
Walk their Tx sockets one packet at a time, preserving the existing
per-socket fairness scheme, instead of using the legacy one-descriptor
fallback. Keep that fallback for shared pools that do not use
multi-buffer Tx. Since the drain state is maintained per socket and both
the singular and shared paths can resume an interrupted drain, changing
the socket list from singular to shared requires no special bind-time
transition.
CQ entries are positional, and drivers may complete only part of the Tx
work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only
entries cannot be published immediately when earlier driver-visible
descriptors are still outstanding.
Track the number of driver-visible CQ entries preceding the reclaim
entries. Let xsk_tx_completed() publish partial hardware Tx completions,
and publish the reclaim entries only after every earlier Tx descriptor
has completed. Complete a reclaim-only batch immediately when there is no
driver-visible work in front of it, and prevent another Tx batch from
being appended while reclaim entries remain pending.
Also cap batch processing by the size of the pool's temporary descriptor
array, as Tx rings belonging to sockets sharing a UMEM may have different
sizes.
This ensures that every invalid Tx descriptor consumed by the ZC batch
path is either submitted to the driver as part of a valid packet or
returned to userspace without violating CQ completion ordering.
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: cf24f5a5feea ("xsk: add support for AF_XDP multi-buffer on Tx path")
Link: https://patch.msgid.link/20260719135609.147823-5-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The temporary Tx descriptor array in an XSK buffer pool is currently
sized from the Tx ring of the socket that creates the pool.
This is insufficient for shared-UMEM Tx. A later socket may have a
larger Tx ring and submit a valid multi-buffer packet containing more
descriptors than the first socket's ring, while still remaining within
the device's xdp_zc_max_segs limit.
A packet-framed batch parser bounded by the temporary array cannot reach
the end-of-packet descriptor in that case. It leaves the packet on the
Tx ring and encounters the same packet on every subsequent attempt,
stalling Tx processing for that socket.
Size the temporary descriptor array to the larger of the first Tx ring
and the device's xdp_zc_max_segs capability. This keeps the array large
enough to inspect one maximum-sized valid packet. Larger shared Tx rings
do not require further resizing, as they can be processed over multiple
batches.
Following commit will actually address the data path side.
Fixes: d5581966040f ("xsk: support ZC Tx multi-buffer in batch API")
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-4-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix generic xmit path multi-buffer logic when packets are either too big
(count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is
included in fragmented packet. Introduce xdp_sock::drain_cont and act
upon this flag - when it is set, keep on consuming descriptors from
AF_XDP Tx ring and put them directly onto Cq. Previously these
descriptors were silently lost and could never be reached again.
Fixes: cf24f5a5feea ("xsk: add support for AF_XDP multi-buffer on Tx path")
Closes: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # wrapped cq addr submission onto routine
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-3-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Store the event cache in the expectation instead of accessing the
exp->master cache, as a step forward towards turning the exp->master
into a cookie.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In case of route updates, tear down flow entries with stale dst to give
them a chance to obtain a fresh route.
This is specifically useful for hardware offloaded entries, where the
flowtable software dataplane sees no packet, where the existing check
for stale dst entries does not help.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc5).
Conflicts:
drivers/net/amt.c
3656a79f94c47 ("amt: re-read skb header pointers after every pull")
586c4dcf28eb6 ("amt: no longer rely on RTNL in amt_fill_info()")
https://lore.kernel.org/amIaJr3aOQNS_Fvl@sirena.org.uk
Adjacent changes:
drivers/net/geneve.c
8efb8f8bbb35 ("geneve: require CAP_NET_ADMIN in the device netns for changelink")
0ba269933f73 ("geneve: convert config to RCU-protected pointer")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sashiko warns that ip_vs_nat_icmp() unconditionally mangles the
payload for embedded non-first IPv4 fragments. The problem is
in the very old inverted pp->dont_defrag check which should not
continue when embedded is a non-first TCP/UDP/SCTP fragment.
Check for embedded non-first fragment is also missing from
ip_vs_out_icmp_v6(), it is needed before any connection
lookups that expect ports after the network headers.
Drop the blocking code from ip_vs_in_icmp_v6() which prevents
ICMPv6 from local clients to use non-MASQ forwarding.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260720201122.79882-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
