| Age | Commit message (Collapse) | Author |
|---|
|
Pull NTB updates from Jon Mason:
"An EPF bug fix to prevent an invalid unmap during device removal,
along with documentation fixes and minor AMD driver cleanups"
* tag 'ntb-7.2' of https://github.com/jonmason/ntb:
ntb: amd: Use named initializer for pci_device_id::driver_data
NTB: fix kernel-doc warnings in ntb.h
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
ntb_hw_amd: Fix incorrect debug message in link disable path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
|
|
Correct a function name and function parameter name to avoid
kernel-doc warnings:
Warning: include/linux/ntb.h:575 expecting prototype for
ntb_default_port_count(). Prototype was for ntb_default_peer_port_count()
instead
Warning: include/linux/ntb.h:590 function parameter 'pidx' not
described in 'ntb_default_peer_port_number'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.2
We've got a good collection of device specific fix here, plus a couple
of stand out things:
- Richard fixed some special cases with the new device_link creation
by more gracefully handling any errors during creation.
- Charles did some light refactoring of the SoundWire interfaces to
fix some persistent randconfig issues that people kept running into.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is all clk driver updates. Mostly new SoC support for various
Qualcomm chips and Canaan K230. Otherwise there's non-critical fixes
and updates to clk data such as adding missing clks to existing
drivers or marking clks critical. Nothing looks especially exciting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (106 commits)
clk: qcom: regmap-phy-mux: Rework the implementation
clk: qcom: a53: Corrected frequency multiplier for 1152MHz
clk: qcom: camcc-milos: Declare icc path dependency for CAMSS_TOP_GDSC
clk: qcom: gdsc: Support enabling interconnect path for power domain
dt-bindings: clock: qcom,milos-camcc: Document interconnect path
interconnect: Add devm_of_icc_get_by_index() as exported API for users
clk: qcom: camcc-x1p42100: Add support for camera clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: videocc-x1p42100: Add support for video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
dt-bindings: clock: qcom: Add X1P42100 video clock controller
clk: keystone: sci-clk: fix application of sizeof to pointer
clk: keystone: don't cache clock rate
clk: spacemit: k3: Add PCIe DBI clock
dt-bindings: soc: spacemit: k3: Add PCIe DBI clock IDs
clk: spacemit: k3: Fix PCIe clock register offset
clk: spacemit: k3: Switch to pll2_d6 as parent for PCIe clock
clk: at91: keep securam node alive while mapping it
clk: samsung: exynos990: Fix PERIC0/1 USI clock types
clk: renesas: r9a08g045: Drop unused pm_domain header file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi
Pull SPMI updates from Stephen Boyd:
"Support for Qualcomm PMIC arbiter v8.5 and Hawi along with a
kernel doc cleanup and a kzalloc flex usage"
* tag 'spmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi:
spmi: use kzalloc_flex in main allocation
spmi: clean up kernel-doc in spmi.h
spmi: spmi-pmic-arb: add support for PMIC arbiter v8.5
dt-bindings: spmi: glymur-spmi-pmic-arb: Add compatible for Qualcomm Hawi SoC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and IPsec.
Current release - regressions:
- do not acquire dev->tx_global_lock in netdev_watchdog_up()
- ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth:
- cn20k: fix subbank free list indexing for search order
- airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag, avoid
an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read"
* tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (213 commits)
selftests: bonding: add a test for VLAN propagation over a bonded real device
vlan: defer real device state propagation to netdev_work
net: add the driver-facing netdev_work scheduling API
net: turn the rx_mode work into a generic netdev_work facility
net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
rxrpc: Fix rxrpc_rotate_tx_rotate() to check there's something to rotate
rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
rxrpc: Fix socket notification race
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
rxrpc: Fix oob challenge leak in cleanup after notification failure
rxrpc: Fix the reception of a reply packet before data transmission
afs: Fix uncancelled rxrpc OOB message handler
afs: Fix further netns teardown to cancel the preallocation charger
rxrpc: Fix double unlock in rxrpc_recvmsg()
rxrpc: Fix leak of connection from OOB challenge
rxrpc: Fix ACKALL packet handling
net: hns3: differentiate autoneg default values between copper and fiber
net: hns3: fix permanent link down deadlock after reset
net: hns3: refactor MAC autoneg and speed configuration
net: hns3: unify copper port ksettings configuration path
...
|
|
With an extra event mask we can easily extend the netdev work
to also service driver-defined events. For advanced drivers
this is probably not a perfect match, but it makes running
deferred work easier in simple cases.
Expose the netdev_work facility to drivers. Add helpers
to schedule work and a dedicated ndo to perform the driver-
-scheduled actions.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260624182018.2445732-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rx_mode update runs from a workqueue: drivers have their
ndo_set_rx_mode_async() callback executed by a single global
work item under RTNL and ops lock. This is a useful pattern.
Support multiple "events" that need to be serviced and make RX_MODE
sync the first one. Call the events "core" because later on
we will let drivers define and schedule their own.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260624182018.2445732-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno reports following splats on mlx5:
RTNL: assertion failed at net/core/dev.c (2241)
WARNING: net/core/dev.c:2241 at netif_state_change+0xed/0x130, CPU#5: ethtool/1335
RIP: 0010:netif_state_change+0xf9/0x130
Call Trace:
<TASK>
__linkwatch_sync_dev+0xea/0x120
ethtool_op_get_link+0xe/0x20
__ethtool_get_link+0x26/0x40
linkstate_prepare_data+0x51/0x200
ethnl_default_doit+0x213/0x470
genl_family_rcv_msg_doit+0xdd/0x110
Looks like I missed ethtool_op_get_link() trying to sync linkwatch,
which needs rtnl_lock. Not all drivers do this - bnxt doesn't,
it just returns the link state, so add an opt-in bit.
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 45079e00133e ("net: ethtool: optionally skip rtnl_lock on Netlink path for GET ops")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260624190439.2521219-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- blk-cgroup locking rework and fixes:
- fix a use-after-free in __blkcg_rstat_flush()
- defer freeing policy data until after an RCU grace period
- defer the blkcg css_put until the blkg is unlinked from
the queue
- unwind the queue_lock nesting under RCU / blkcg->lock
across the lookup, create, associate and destroy paths
- NVMe fixes via Keith:
- Fix a crash and memory leak during invalid cdev teardown,
and related cdev cleanups (Maurizio, John)
- nvmet fixes: handle TCP_CLOSING in the tcp state_change
handler, reject short AUTH_RECEIVE buffers, handle inline
data with a nonzero offset in rdma, fix an sq refcount leak,
and allocate ana_state with the port (Maurizio, Michael,
Bryam, Wentao, Rosen)
- nvme-fc fix to not cancel requests on an IO target before it
is initialized (Mohamed)
- nvme-apple fix to prevent shared tags across queues on Apple
A11 (Nick)
- Various smaller fixes and cleanups (John)
- MD fixes via Yu Kuai:
- raid1/raid10 fixes for writes_pending and barrier reference
leaks on write and discard failures, plus REQ_NOWAIT handling
fixes (Abd-Alrhman)
- raid5 discard accounting and validation, and a batch of fixes
for stripe batch races (Yu Kuai, Chen)
- Protect raid1 head_position during read balancing (Chen)
- block bio-integrity fixes: correct an error injection static key
decrement, fix GFP flag confusion in bio_integrity_alloc_buf(), and
handle REQ_OP_ZONE_APPEND in __bio_integrity_action() (Christoph)
- Fixes for bio_iov_iter_bounce_write(): revert the iov_iter after a
short copy, and respect the iov_iter nofault flag (Qu)
- Invalidate the cached plug timestamp after a task switch, and clear
PF_BLOCK_TS in copy_process() (Usama)
- Fix the IORING_URING_CMD_REISSUE flags check in blkdev_uring_cmd()
(Yitang)
- Remove a redundant plug in __submit_bio() (Wen)
- Don't warn when reclassifying a busy socket lock in nbd (Deepanshu)
* tag 'block-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (45 commits)
block: handle REQ_OP_ZONE_APPEND in __bio_integrity_action
block: fix GFP_ flags confusion in bio_integrity_alloc_buf
block, bfq: don't grab queue_lock to initialize bfq
mm/page_io: don't nest queue_lock under rcu in bio_associate_blkg_from_page()
blk-cgroup: don't nest queue_lock under blkcg->lock in blkcg_destroy_blkgs()
blk-cgroup: don't nest queue_lock under rcu in bio_associate_blkg()
blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()
blk-cgroup: don't nest queue_lock under rcu in blkcg_print_blkgs()
blk-cgroup: delay freeing policy data after rcu grace period
blk-cgroup: protect iterating blkgs with blkcg->lock in blkcg_print_stat()
md/raid5: avoid R5_Overlap races while breaking stripe batches
md/raid5: use stripe state snapshot in break_stripe_batch_list()
blk-cgroup: defer blkcg css_put until blkg is unlinked from queue
blk-cgroup: fix UAF in __blkcg_rstat_flush()
block, bfq: protect async queue reset with blkcg locks
nbd: don't warn when reclassifying a busy socket lock
block: fix incorrect error injection static key decrement
md/raid5: let stripe batch bm_seq comparison wrap-safe
md/raid1: protect head_position for read balance
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a file reference leak in the nop opcode when used with
IOSQE_FIXED_FILE
- Preserve the SQ array entries when resizing the ring via the register
path
- Preserve the partial result for an iopoll request rather than
overwriting it
- Don't audit log IORING_OP_RECV_ZC
- Bound io_pin_pages() by the page array byte size in the memmap path
- Follow-up cleanup to the task_work mpscq conversion, getting rid of
the now-unnecessary tw_pending tracking for the !DEFER_TASKRUN path
- Switch a system_unbound_wq user over to system_dfl_wq
* tag 'io_uring-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/memmap: bound io_pin_pages() by page array byte size
io_uring: Use system_dfl_wq instead of system_unbound_wq
io_uring/register: preserve SQ array entries on resize
io_uring, audit: don't log IORING_OP_RECV_ZC
io_uring: get rid of tw_pending for !DEFER task work
io_uring/rw: preserve partial result for iopoll
io_uring/nop: fix file reference leak with IOSQE_FIXED_FILE
|
|
* clk-microchip:
clk: at91: keep securam node alive while mapping it
clk: at91: sama7d65: add peripheral clock for I3C
clk: microchip: mpfs-ccc: fix peripheral driver registration failures after oob fix
clk: at91: sam9x7: Fix gmac_gclk clock definition
clk: at91: sam9x7: Rename macb0_clk to gmac_clk
clk: at91: sam9x7: Remove gmac peripheral clock with ID 67
clk: microchip: rename clk-core to clk-pic32
* clk-qcom: (32 commits)
clk: qcom: regmap-phy-mux: Rework the implementation
clk: qcom: a53: Corrected frequency multiplier for 1152MHz
clk: qcom: camcc-milos: Declare icc path dependency for CAMSS_TOP_GDSC
clk: qcom: gdsc: Support enabling interconnect path for power domain
dt-bindings: clock: qcom,milos-camcc: Document interconnect path
interconnect: Add devm_of_icc_get_by_index() as exported API for users
clk: qcom: camcc-x1p42100: Add support for camera clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: videocc-x1p42100: Add support for video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
dt-bindings: clock: qcom: Add X1P42100 video clock controller
clk: qcom: nord: negcc: add support for the USB2 PHY reset
dt-bindings: clock: qcom: add the definition for the USB2 PHY reset
clk: qcom: clk-rpmh: Make all VRMs optional
clk: qcom: Add support for global clock controller on Hawi
clk: qcom: clk-alpha-pll: Add support for Taycan EHA_T PLL
clk: qcom: Add Hawi TCSR clock controller driver
clk: qcom: rpmh: Add support for Hawi RPMH clocks
dt-bindings: clock: qcom: Add Hawi global clock controller
dt-bindings: clock: qcom: Add Hawi TCSR clock controller
...
|
|
into clk-next
* clk-renesas: (36 commits)
clk: renesas: r9a08g045: Drop unused pm_domain header file
clk: renesas: r8a779g0: Add DSC clock
clk: renesas: rzg2l: Rename iterator in for_each_mod_clock() to avoid shadowing
clk: renesas: r9a08g045: Drop unused DEF_G3S_MUX macro
clk: renesas: rzg2l: Rename RZG3L-prefixed PLL macros to CPG-prefixed ones
clk: renesas: rzg3s/rzg3l: Simplify PLL configuration macro
clk: renesas: rzg2l: Simplify SAM PLL configuration macro
clk: renesas: r8a73a4: Add ZT/ZTR trace clocks
dt-bindings: clock: renesas,cpg-clocks: Document ZT/ZTR trace clock on R-Mobile APE6
clk: renesas: r9a08g046: Add RSPI clocks and resets
clk: renesas: r9a08g046: Add SSIF-2 clocks and resets
clk: renesas: r9a08g046: Add RSCI clocks and resets
clk: renesas: cpg-mssr: Add number of clock cells check
clk: renesas: rzg2l: Refactor rzg3l_cpg_pll_clk_endisable()
clk: renesas: rzg2l: Consolidate DEF_MUX() and DEF_MUX_FLAGS()
clk: renesas: r9a08g046: Add IA55_PCLK to critical module clocks
clk: renesas: r9a09g047: Add support for LCDC{0,1} clocks and resets
clk: renesas: r9a09g047: Add support for DSI clocks and resets
clk: renesas: r9a09g047: Add support for SMUX2_DSI{0,1}_CLK
clk: renesas: r9a09g047: Add CLK_PLLDSI{0,1}_CSDIV clocks
...
* clk-socfpga:
clk: socfpga: agilex: implement l3_main_free_clk
* clk-amlogic:
dt-bindings: clock: amlogic: t7: Add missing mpll3 parent clock
dt-bindings: clock: amlogic: Fix redundant hyphen in "amlogic,t7-gp1--pll" string.
* clk-canaan:
clk: canaan: Add clock driver for Canaan K230
dt-bindings: clock: Add Canaan K230 clock controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers
* tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits)
Input: mms114 - fix touch indexing for MMS134S and MMS136
Input: elan_i2c - prevent division by zero and arithmetic underflow
Input: stop force-feedback timer when unregistering input devices
Input: iforce - bound the device-reported force-feedback effect index
Input: goodix - clamp the device-reported contact count
Input: mms114 - reject an oversized device packet size
Input: touchwin - reset the packet index on every complete packet
Input: rmi4 - update formatting in F12
Input: rmi4 - propagate proper error code in F12 sensor tuning
Input: rmi4 - simplify size calculations in F12
Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators
Input: rmi4 - use devm_kmalloc for F12 data packet buffer
Input: rmi4 - use flexible array member for IRQ masks in F12
Input: rmi4 - use unaligned access helpers in F12
Input: rmi4 - change reg_size type to u32
Input: rmi4 - refactor F12 probe function
Input: rmi4 - use kzalloc_flex() for struct rmi_function
Input: rmi4 - refactor function allocation and registration
Input: rmi4 - use local presence map in rmi_read_register_desc()
Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()
...
|
|
bio_integrity_alloc_buf usage of GFP_ flags is messed up. For one it
mixes GFP_NOFS and GFP_NOIO for neighbouring allocations, but it also
makes the allocations fail more often than needed. That code was copied
from bio_alloc_bioset which needs to do that so that it can punt to the
rescuer workqueue, but none of that is needed for the integrity
allocations that either sits in the file system or at the very bottom
of the I/O stack. Failing early means we'll do a fully waiting
allocation from the mempool ->alloc callback which is usually much
larger than required.
Fix this by passing a gfp_t so that the file system path can pass
GFP_NOFS and the auto-integrity code can pass GFP_NOIO, and don't
modify the allocation type except for disabling warnings.
Fixes: ec7f31b2a2d3 ("block: make bio auto-integrity deadlock safe")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://patch.msgid.link/20260624080014.1998650-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NFS client updates from Anna Schumaker:
"New features:
- XPRTRDMA: Decouple req recycling from RPC completion
- NFS: Expose FMODE_NOWAIT for read-only files
Bugfixes:
- SUNRPC:
- Fix sunrpc sysfs error handling
- Fix uninitialized xprt_create_args structure
- XPRTRDMA:
- Harden connect and reply handling
- NFS:
- Fix EOF updates after fallocate/zero-range
- Keep PG_UPTODATE clear after read errors in page groups
- Use nfsi->rwsem to protect traversal of the file lock list
- Prevent resource leak in nfs_alloc_server()
- NFSv4:
- Clear exception state on successful mkdir retry
- Don't skip revalidate when holding a dir delegation and attrs are stale
- pNFS:
- Fix use-after-free in pnfs_update_layout()
- Defer return_range callbacks until after inode unlock
- Fix LAYOUTCOMMIT retry loop on OLD_STATEID
- Reject zero-length r_addr in nfs4_decode_mp_ds_addr
- NFS/flexfiles:
- Reject zero-length filehandle version arrays
- Fix checking if a layout is striped
- Fixes for honoring FF_FLAGS_NO_IO_THRU_MDS
Other cleanups and improvements:
- Remove the fileid field from struct nfs_inode
- Move long-delayed xprtrdma work onto the system_dfl_long_wq
- Convert xprtrdma send buffer free list to an llist
- Show "<redacted>" for cert_serial and privkey_serial mount options"
* tag 'nfs-for-7.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (42 commits)
NFS: Use common error handling code in nfs_alloc_server()
NFS: Prevent resource leak in nfs_alloc_server()
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
nfs: don't skip revalidate on directory delegation when attrs flagged stale
xprtrdma: Return sendctx slot after Send preparation failure
xprtrdma: Repost Receive buffers for malformed replies
xprtrdma: Sanitize the reply credit grant after parsing
xprtrdma: Fix bcall rep leak and unbounded peek
xprtrdma: Resize reply buffers before reposting receives
xprtrdma: Check frwr_wp_create() during connect
xprtrdma: Initialize re_id before removal registration
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
xprtrdma: Convert send buffer free list to llist
NFS: correct CONFIG_NFS_V4 macro name in #endif comment
nfs: use nfsi->rwsem to protect traversal of the file lock list
NFSv4.1/pNFS: fix LAYOUTCOMMIT retry loop on OLD_STATEID
nfs: expose FMODE_NOWAIT for read-only files
nfs: add nowait version of nfs_start_io_direct
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS in pg_get_mirror_count_write
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS on fatal DS connect errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"The changes primarily focus on filesystem error reporting, reducing
memory footprint by reverting in-memory data structures used for
runtime validation, honoring FDP hints, and adding trace and debug
logs. In addition, there are critical bug fixes resolving
out-of-bounds read vulnerabilities in inline directory and ACL
handling, potential deadlocks in balance_fs, use-after-free issues in
atomic writes, and false data/node type assignments in large sections.
Enhancements:
- Revert in-memory sit version and block bitmaps
- support to report fserror
- add trace_f2fs_fault_report
- add iostat latency tracking for direct IO
- add logs in f2fs_disable_checkpoint()
- honor per-I/O write streams for direct writes
- map data writes to FDP streams
- skip inode folio lookup for cached overwrite
- skip direct I/O iostat context when disabled
- revert "check in-memory block bitmap"
- revert "check in-memory sit version bitmap"
Fixes:
- optimize representative type determination in GC
- fix incorrect FI_NO_EXTENT handling in __destroy_extent_node()
- fix potential deadlock in f2fs_balance_fs()
- fix potential deadlock in gc_merge path of f2fs_balance_fs()
- atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- fix missing read bio submission on large folio error
- pass correct iostat type for single node writes
- fix to do sanity check on f2fs_get_node_folio_ra()
- validate orphan inode entry count
- keep atomic write retry from zeroing original data
- read COW data with the original inode during atomic write
- validate inline dentry name lengths before conversion
- validate dentry name length before lookup compares it
- reject setattr size changes on large folio files
- revert "remove non-uptodate folio from the page cache in move_data_block"
- validate ACL entry sizes in f2fs_acl_from_disk()
- bound i_inline_xattr_size for non-inline-xattr inodes
- fix listxattr handling of corrupted xattr entries
- fix to round down start offset of fallocate for pin file"
* tag 'f2fs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
f2fs: fix to round down start offset of fallocate for pin file
f2fs: fix listxattr handling of corrupted xattr entries
f2fs: skip direct I/O iostat context when disabled
f2fs: remove unneeded f2fs_is_compressed_page()
f2fs: avoid unnecessary fscrypt_finalize_bounce_page()
f2fs: avoid unnecessary sanity check on ckpt_valid_blocks
f2fs: misc cleanup in f2fs_record_stop_reason()
f2fs: fix wrong description in printed log
f2fs: bound i_inline_xattr_size for non-inline-xattr inodes
f2fs: validate ACL entry sizes in f2fs_acl_from_disk()
Revert "f2fs: remove non-uptodate folio from the page cache in move_data_block"
f2fs: Split f2fs_write_end_io()
f2fs: Rename f2fs_post_read_wq into f2fs_wq
f2fs: Prepare for supporting delayed bio completion
f2fs: reject setattr size changes on large folio files
f2fs: validate dentry name length before lookup compares it
f2fs: validate inline dentry name lengths before conversion
f2fs: read COW data with the original inode during atomic write
f2fs: skip inode folio lookup for cached overwrite
f2fs: keep atomic write retry from zeroing original data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- New devm_of_dma_controller_register() API
- Refactor devm_dma_request_chan() API
New Support:
- Loongson Multi-Channel DMA controller support
- Renesas RZ/{T2H,N2H} support
- Dw CV1800B DMA support
- Switchtec DMA engine driver
U pdates:
- Xilinx AXI dma binding conversion
- Renesas CHCTRL register read updates
- AMD MDB Endpoint and non-LL mode Support
- AXI dma handling of SW and HW cyclic transfers termination
- Intel ioatdma and idxd driver updates"
* tag 'dmaengine-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (62 commits)
dt-bindings: dma: snps,dw-axi-dmac: Add fallback compatible for CV1800B
MAINTAINERS: dmaengine/ti: Remove myself and add Vignesh as maintainer
dmaengine: qcom: Unify user-visible "Qualcomm" name
dt-bindings: dma: qcom,gpi: Document GPI DMA engine for Shikra SoC
dmaengine: qcom: hidma: use sysfs_emit() in sysfs show callbacks
dmaengine: dw-axi-dmac: fix PM for system sleep and channel alloc
dmaengine: dw-axi-dmac: drop redundant DMAC enable in block start
dmaengine: altera-msgdma: Use memcpy_toio for descriptor FIFO writes
dt-bindings: dma: fsl-edma: add dma-channel-mask property description
dmaengine: tegra: Fix burst size calculation
dmaengine: iop32x-adma: Remove a leftover header file
dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor
dmaengine: dma-axi-dmac: Drop struct clk from main struct
dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc
dmaengine: Fix possible use after free
dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK
dmaengine: dw-edma-pcie: Reject devices without driver data
dmaengine: sh: rz-dmac: Add DMA ACK signal routing support
irqchip/renesas-rzv2h: Add DMA ACK signal routing support
dmaengine: dw-edma: Remove dw_edma_add_irq_mask()
...
|
|
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Add pci_host_common_parse_ports() for use by any native driver to parse
Root Port properties (currently only reset GPIOs) (Sherry Sun)
- Assert PERST# before enabling regulators to ensure that even if power is
enabled, endpoint stays inactive until REFCLK is stable (Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host bridge)
to help support Key E connectors and the pwrctrl framework (Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power supplies
(Sherry Sun)
* pci/controller/dwc-imx6:
PCI: imx6: Integrate new pwrctrl API
PCI: imx6: Assert ref_clk_en after reference clock stabilizes on i.MX95
PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95
PCI: imx6: Parse 'reset-gpios' in Root Port nodes
PCI: imx6: Assert PERST# before enabling regulators
PCI: host-generic: Add common helpers for parsing Root Port properties
dt-bindings: PCI: fsl,imx6q-pcie: Add reset GPIO in Root Port node
PCI: imx6: Fix IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling
|
|
- Add endpoint controller APIs for use by function drivers to discover
auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the EPC
aux-resource API (Koichiro Den)
- Refactor endpoint doorbell allocation to allow non-MSI doorbells
(Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation fails
(Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell test
(Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way through
(Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid calling it
from hardirq context (Koichiro Den)
- Validate doorbell count when configuring NTB and vNTB doorbells
(Manivannan Sadhasivam)
- Call sleepable pci_epc_raise_irq() from a work item instead of atomic
context, e.g., when setting bits in NTB peer doorbells in the
ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Reject unusable vNTB doorbell counts, e.g., if they don't allow space for
link event 0 and historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and historically
skipped slot 1) so they don't appear as valid doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients can use
multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only specified
bits, use the correct vector for non-contiguous Linux IRQ numbers, and
validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients can use
multiple vectors (Koichiro Den)
* pci/endpoint:
NTB: epf: Implement .db_vector_count()/mask() for doorbells
NTB: epf: Fix doorbell bitmask and IRQ vector handling
NTB: epf: Report 0-based doorbell vector via ntb_db_event()
NTB: epf: Make db_valid_mask cover only real doorbell bits
NTB: epf: Document legacy doorbell slot offset in ntb_epf_peer_db_set()
PCI: endpoint: pci-epf-vntb: Implement .db_vector_count()/mask() for doorbells
PCI: endpoint: pci-epf-vntb: Exclude reserved slots from db_valid_mask
PCI: endpoint: pci-epf-vntb: Guard configfs writes after EPC attach
PCI: endpoint: pci-epf-vntb: Reject unusable doorbell counts
PCI: endpoint: pci-epf-vntb: Report 0-based doorbell vector via ntb_db_event()
PCI: endpoint: pci-epf-vntb: Defer pci_epc_raise_irq() out of atomic context
PCI: endpoint: pci-epf-vntb: Document legacy MSI doorbell offset
PCI: endpoint: pci-epf-ntb: Add check to detect 'db_count' value of 0
PCI: endpoint: pci-epf-vntb: Add check to detect 'db_count' value of 0
NTB: epf: Avoid calling pci_irq_vector() from hardirq context
NTB: epf: Fix request_irq() unwind in ntb_epf_init_isr()
misc: pci_endpoint_test: Remove dead BAR read before doorbell trigger
misc: pci_endpoint_test: Validate BAR index in doorbell test
PCI: endpoint: pci-ep-msi: Add embedded doorbell fallback
PCI: endpoint: pci-epf-test: Reuse pre-exposed doorbell targets
PCI: endpoint: pci-epf-vntb: Reuse pre-exposed doorbells and IRQ flags
PCI: endpoint: pci-ep-msi: Refactor doorbell allocation for new backends
PCI: dwc: ep: Expose integrated eDMA resources via EPC aux-resource API
PCI: dwc: Record integrated eDMA register window
PCI: endpoint: Add auxiliary resource query API
|
|
- Add Gen6 Device IDs to the switchtec driver (Ben Reed)
* pci/switchtec:
PCI: switchtec: Add Gen6 Device IDs
|
|
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize' attributes
(Krzysztof Wilczyński)
- Convert PCI resource files to static attributes to avoid races that cause
'duplicate filename' warnings and boot panics (Krzysztof Wilczyński)
- Remove pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
which are obsolete after converting to static attributes (Krzysztof
Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource mmap
path to match the generic path (Krzysztof Wilczyński)
- Convert sysfs 'legacy_io' and 'legacy_mem' to static attributes
(Krzysztof Wilczyński)
- Remove pci_create_legacy_files() and pci_sysfs_init(), which are obsolete
after converting to static attributes (Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with PCI
mmap (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no trailing
newline (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/sysfs: Add static PCI resource attribute macros
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
PCI/sysfs: Split pci_llseek_resource() for device and legacy attributes
PCI/sysfs: Only allow supported resource types in I/O and MMIO helpers
PCI: Add pci_resource_is_io() and pci_resource_is_mem() helpers
PCI/sysfs: Use PCI resource accessor macros
|
|
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Rename 'added' to 'add_list' for naming consistency (Ilpo Järvinen)
- Consolidate 'add_list' sanity checks (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Move pci_resource_alignment() from header to setup-res.c file (Ilpo
Järvinen)
* pci/resource:
PCI: Move pci_resource_alignment() to setup-res.c file
PCI: Convert pci_resource_alignment() input parameters to const
PCI: Make pci_sriov_resource_alignment() pci_dev const
powerpc/pseries: Make pseries_get_iov_fw_value() & pnv_iov_get() pci_dev const
resource: Make resource_alignment() input const resource
PCI: Remove const removal cast
PCI: Consolidate add_list (aka realloc_head) empty sanity checks
PCI: Rename 'added' to 'add_list'
PCI: Log all resource claims
|
|
- Set power state to 'unknown' for all devices, not just those with
drivers, during suspend (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device doesn't
respond to config reads, to avoid invalid array accesses (Marco
Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether devices may
be reset while resuming from suspend due to platform issues; use this in
nvme to avoid issues on Qcom RCs (Manivannan Sadhasivam)
* pci/pm:
nvme-pci: Use pci_suspend_retains_context() during suspend
PCI: qcom: Indicate broken L1SS exit during resume from system suspend
PCI: Indicate context lost if L1SS exit is broken during resume from system suspend
PCI: Add pci_suspend_retains_context() to check if device state is preserved during suspend
PCI/IOV: Skip VF Resizable BAR restore on read error
PCI: Skip Resizable BAR restore on read error
PCI: Stop setting cached power state to 'unknown' on unbind
|
|
Currently, pci_create_legacy_files() and pci_remove_legacy_files() are
no-op stubs. With legacy attributes now handled by static groups
registered via pcibus_groups[], no call site needs them.
Remove both functions, their declarations, and the call sites in
pci_register_host_bridge(), pci_alloc_child_bus(), and pci_remove_bus().
Remove the pci_sysfs_init() late_initcall and sysfs_initialized. The
late_initcall originally existed to create all the dynamic PCI sysfs files,
but with both resource and legacy attributes now handled by static groups,
it is no longer needed.
Remove the legacy_io and legacy_mem fields from struct pci_bus which were
used to track the dynamically allocated legacy attributes.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-24-kwilczynski@kernel.org
|
|
Add defines for the standard PCI legacy address space sizes, replacing the
raw literals used by the legacy sysfs attributes.
Then, replace open-coded values with the newly added macros.
No functional changes intended.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-20-kwilczynski@kernel.org
|
|
Currently, pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files()
are no-op stubs. With both the generic and Alpha resource files now
handled by static attribute groups, no platform needs dynamic per-device
sysfs file creation.
Remove both functions, their declarations, and the call sites in
pci_bus_add_device() and pci_stop_dev().
Remove __weak pci_create_resource_files() and pci_remove_resource_files()
stubs and their declarations in pci.h, as no architecture overrides them
anymore.
Remove the res_attr[] and res_attr_wc[] fields from struct pci_dev which
were used to track dynamically allocated resource attributes.
Finally, simplify pci_sysfs_init() to only handle legacy file creation
under HAVE_PCI_LEGACY, removing the per-device loop and the
HAVE_PCI_SYSFS_INIT helper added earlier.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-19-kwilczynski@kernel.org
|
|
On platforms with HAVE_PCI_MMAP or ARCH_GENERIC_PCI_MMAP_RESOURCE, resource
files are now handled by static attribute groups registered via
pci_dev_groups[].
Stub out the pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
as the dynamic resource file creation is no longer needed.
Also, simplify pci_sysfs_init() on these platforms to only iterate buses
for legacy attributes creation, skipping the per-device loop.
Move the __weak stubs for pci_create_resource_files() and
pci_remove_resource_files() into the #else branch since only platforms
without HAVE_PCI_MMAP (such as Alpha architecture) still need them. Guard
the res_attr[] and res_attr_wc[] fields in struct pci_dev the same way.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-10-kwilczynski@kernel.org
|
|
Currently, the PCI resource files (resourceN, resourceN_wc) are dynamically
created by pci_create_sysfs_dev_files(), called from both
pci_bus_add_device() and the pci_sysfs_init() late_initcall, with only a
sysfs_initialized flag for synchronisation. This has caused warnings and
boot panics when both paths race on the same device, e.g.:
sysfs: cannot create duplicate filename '/devices/pci0000:3c/0000:3c:01.0/0000:3e:00.2/resource2'
This is especially likely on Devicetree-based platforms, where the PCI host
controllers are platform drivers that probe via the driver model, which can
happen during or after the late_initcall. As such, pci_bus_add_device()
and pci_sysfs_init() are more likely to overlap.
Convert to static const attributes with three attribute groups (I/O, UC,
WC), each with an .is_bin_visible() callback that checks resource flags,
BAR length, and non_mappable_bars. A .bin_size() callback provides
pci_resource_len() to the kernfs node for correct stat and lseek behaviour.
As part of this conversion:
- Rename pci_read_resource_io() and pci_write_resource_io() to
pci_read_resource() and pci_write_resource() since the callbacks are no
longer I/O-specific in the static attribute context.
- Update __resource_resize_store() to use sysfs_create_groups() and
sysfs_remove_groups(), which re-evaluates visibility and runs the
.bin_size() callback for the static resource attribute groups.
- Remove pci_create_resource_files(), pci_remove_resource_files(), and
pci_create_attr() which are no longer needed.
- Move the __weak stubs outside the #if guard so they remain available
for callers converted in subsequent commits.
Platforms that do not define the HAVE_PCI_MMAP macro or the
ARCH_GENERIC_PCI_MMAP_RESOURCE macro, such as Alpha architecture,
continue using their platform-specific resource file creation.
For reference, the dynamic creation dates back to the pre-Git era:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/drivers/pci/pci-sysfs.c?id=42298be0eeb5ae98453b3374c36161b05a46c5dc
The write-combine support was added in commit 45aec1ae72fc ("x86: PAT
export resource_wc in pci sysfs").
Many other reports mentioned in the cover letter (first Link: below).
Link: https://lore.kernel.org/r/20260508043543.217179-1-kwilczynski@kernel.org/
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215515
Closes: https://github.com/openwrt/openwrt/issues/17143
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-8-kwilczynski@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "khugepaged: add mTHP collapse support" (Nico Pache)
Provide khugepaged with the capability to collapse anonymous memory
regions to mTHPs
- "Remove CONFIG_READ_ONLY_THP_FOR_FS and enable file THP for writable
files" (Zi Yan)
Remove the READ_ONLY_THP_FOR_FS check in file_thp_enabled(), so that
khugepaged and MADV_COLLAPSE can run on filesystems with PMD THP
pagecache support even without READ_ONLY_THP_FOR_FS enabled
- "make MM selftests more CI friendly" (Mike Rapoport)
General fixes and cleanups to the MM selftests. Also move more MM
selftests under the kselftest framework, making them more amenable to
ongoing CI testing
- "selftests/mm: fix failures and robustness improvements" and
"selftests/mm: assorted fixes for hmm-tests" (Sayali Patil)
Fix several issues in MM selftests which were revealed by powerpc 64k
pagesize
* tag 'mm-stable-2026-06-23-08-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (118 commits)
Revert "mm: limit filemap_fault readahead to VMA boundaries"
mm/vmscan: pass NULL to trace vmscan node reclaim
mm: use mapping_mapped to simplify the code
selftests/mm: fix exclusive_cow test fork() handling
selftests/mm: remove hardcoded THP sizing assumptions in hmm tests
selftests/mm: allow PUD-level entries in compound testcase of hmm tests
mm/gup_test: reject wrapped user ranges
mm/page_frag: reject invalid CPUs in page_frag_test
mm/damon/core: always put unsuccessfully committed target pids
mm: page_isolation: avoid unsafe folio reads while scanning compound pages
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
selftests: mm: fix and speedup "droppable" test
mm: merge writeout into pageout
MAINTAINERS: add Hao Ge as reviewer for codetag and alloc_tag
selftests/mm: clarify alternate unmapping in compaction_test
selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category
selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero
selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported
selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap
selftest/mm: register existing mapping with userfaultfd in hugetlb-mremap
...
|
|
pci_sriov_resource_alignment() inputs struct pci_dev which it should not
need to alter to calculate alignment.
Make pci_dev pci_sriov_resource_alignment() inputs const. It requires
making pci_iov_resource_size() input const as well.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-8-ilpo.jarvinen@linux.intel.com
|
|
resource_alignment() does not need to change resource so it can be made
const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-6-ilpo.jarvinen@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Core:
- add debugfs support for used channels
- fix resource leak on startup failure
- propagate tx error codes
- clarify blocking mode thread support
Drivers:
- exynos: remove unused register definitions
- imx: refactor IRQ handlers, migrate to devm helpers, and other
minor improvements
- mpfs: fix syscon presence check in inbox ISR
- mtk-adsp: fix use-after-free during device teardown
- qcom: add dt-bindings for QCOM Maili, Hawi, Shikra APCS, and Nord
CPUCP platform support"
* tag 'mailbox-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (23 commits)
mailbox: imx: Don't force-thread the primary handler
mailbox: imx: Move the RXDB part of the mailbox into the threaded handler
mailbox: imx: Move the RX part of the mailbox into the threaded handler
mailbox: imx: Start splitting the IRQ handler in primary and threaded handler
mailbox: imx: Use channel index instead of zero in imx_mu_specific_rx()
mailbox: imx: use devm_of_platform_populate()
mailbox: imx: Use devm_pm_runtime_enable()
mailbox: imx: Add a channel shutdown field
mailbox: imx: Forward the timeout/ error in imx_mu_generic_tx()
dt-bindings: mailbox: qcom: Add IPCC support for Maili Platform
mailbox: add list of used channels to debugfs
mailbox: don't free the channel if the startup callback failed
mailbox: Make mbox_send_message() return error code when tx fails
mailbox: Clarify multi-thread is not supported in blocking mode
mailbox: mtk-adsp: fix UAF during device teardown
mailbox: qcom: Unify user-visible "Qualcomm" name
mailbox: exynos: Drop unused register definitions
dt-bindings: mailbox: qcom: Add IPCC support for Hawi Platform
dt-bindings: mailbox: qcom,cpucp-mbox: Add Hawi compatible
dt-bindings: mailbox: qcom: Add Shikra APCS compatible
...
|
|
As SoundWire devices tend to enumerate on the bus after probe, drivers
frequently need to wait for the device to initialise from common driver
code. The common system is to split drivers into a core module and then
a module for each communication bus. These two facts tend to cause
Kconfig issues, the issue tends to be when SOUNDWIRE=m and DRIVER_I2C=y,
this usually selects DRIVER=y. The driver code then wants to call
sdw_slave_wait_for_init(), but this results in calling a module function
from built in code. A depends on SOUNDWIRE | !SOUNDWIRE could be added to
the end driver but this seems slightly off as it adds a lot of counter
intuitive depends.
A simpler solution is to make sdw_slave_wait_for_init() a static inline
function. As part of doing this add a check for the slave device being
NULL acknowledging that this is likely called from code that is shared
between control buses. It does require dropping the call to
sdw_show_ping_status() but this can be added back in end drivers that
used it originally.
Currently this is causing rand config issues on RT5682 and will soon
also cause similar problems on cs42l43.
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260623101814.24044-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- use correct names in kernel-doc comments
- add missing struct members to kernel-doc comments
Warning: include/linux/netfilter/x_tables.h:41 struct member 'targinfo' not described in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:41 Excess struct member 'targetinfo' description in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'family' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'nft_compat' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:101 expecting prototype for struct xt_mdtor_param. Prototype was for struct xt_mtdtor_param instead
Warning: include/linux/netfilter/x_tables.h:121 struct member 'net' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'table' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'target' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'targinfo' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'hook_mask' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'family' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'nft_compat' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:345 expecting prototype for xt_recseq(). Prototype was for DECLARE_PER_CPU() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Memoryless force-feedback devices use a timer to manage playback of
effects. When a driver for such a device is unbound (or the device is
unregistered for other reasons), the driver typically frees its private
data synchronously. However, the input_dev structure (and its associated
force-feedback structures, including the timer) is only freed when the
last user closes the corresponding device node.
If userspace keeps the device node open while the device is unregistered
(e.g., during driver unbind), the force-feedback timer can still fire
after the driver's private data has been freed.
Introduce a new 'stop' callback to struct ff_device, and call it from
input_unregister_device() before the device is deleted. Implement this
callback for memoryless devices and synchronously shut down the timer to
ensure it is stopped and cannot be rearmed once unregistration happens.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add a new function rtc_read_next_alarm() that reads the next expiring
alarm from the RTC timerqueue. This is different from rtc_read_alarm(),
which only reads the aie_timer.
The wakealarm sysfs file programs the rtc->aie_timer, whereas the
alarmtimer suspend routine programs its own timer into the RTC timerqueue.
Both timers end up in the RTC's timerqueue, and the first expiring timer
is what gets armed in the hardware.
This new function allows code to query which alarm will actually fire
next, regardless of which subsystem programmed it. This is needed by
platform code that needs to program secondary timers based on the
actual next wakeup time.
Link: https://lore.kernel.org/all/87ed50z0le.ffs@tglx
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260521043714.1022930-2-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
f2fs_recover_orphan_inodes() trusts the orphan block entry_count when
replaying orphan inodes from the checkpoint pack. A corrupted entry_count
larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the
ino[] array and interpret footer or following data as inode numbers.
On a crafted image, mounting an unpatched kernel can drive orphan recovery
into f2fs_bug_on() and panic the kernel. Validate entry_count before
consuming entries so corrupted checkpoint data fails the mount with
-EFSCORRUPTED and requests fsck instead.
Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be
recorded in the superblock s_errors[] field. This gives fsck a persistent
hint even though mount-time orphan recovery failure may leave no chance to
persist SBI_NEED_FSCK through a checkpoint.
Cc: stable@kernel.org
Fixes: 127e670abfa7 ("f2fs: add checkpoint operations")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 7.2-rc1.
Overall we end up removing more code than added, due to an obsolete
synclink_gt driver being removed from the tree, always a nice thing to
see happen.
Other than that driver removal, major things included in here are:
- max310x serial driver updates and fixes
- 8250 driver updates and rework in places to make it more "modern"
- dts file updates
- serial driver core tweaks and updates
- vt code cleanups
- vc_screen crash fixes
- other minor driver updates and cleanups
All of these have been in linux-next for well over a week with no
reported issues"
* tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
serial: 8250_pci: Don't specify conflicting values to pci_device_id members
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero
vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width()
serial: 8250: fix possible ISR soft lockup
dt-bindings: serial: rs485: remove deprecated .txt binding stub
serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial
tty: serial: Use named initializers for arrays of i2c_device_data
serial: 8250_dw: remove clock-notifier infrastructure
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
amba/serial: amba-pl011: Bring back zx29 UART support
serial: 8250: Add support for console flow control
serial: 8250: Check LSR timeout on console flow control
serial: 8250: Set cons_flow on port registration
tty: serial: 8250: protect against NULL uart->port.dev in register
arm64: dts: add support for A9 based Amlogic BY401
dt-bindings: arm: amlogic: add A311Y3 support
serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled
serial: qcom-geni: Avoid probing debug console UART without console support
serial: max310x: add comments for PLL limits
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull more i2c updates from Andi Shyti:
"Cleanups:
- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups in
algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema"
* tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: pxa: Use named initializers for the platform_device_id array
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
i2c: stm32f7: truncate clock period instead of rounding it
dt-bindings: i2c: microchip,corei2c: permit resets
i2c: qcom: Unify user-visible "Qualcomm" name
i2c: ls2x-v2: return IRQ_HANDLED after servicing an error
i2c: atr: annotate i2c_atr_adap_desc->aliases with __counted_by_ptr
i2c: algo: bit: use str_plural helper in bit_xfer
dt-bindings: i2c: i2c-mux-pinctrl: change maintainer
dt-bindings: i2c: convert i2c-mux-reg to DT schema
i2c: davinci: Unregister cpufreq notifier on probe failure
i2c: qcom-cci: Remove overcautious disable_irq() calls
i2c: qcom-cci: Move cci_init() under cci_reset() function
i2c: qcom-cci: Do not check return value of cci_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there was a lot of work around the mipi-i3c-hci driver
that also led to improvements of the core. We also have support for a
new SoC, the Microchip SAMA7D65. And of course, there are small fixes
for the other controller drivers.
Subsystem:
- introduce dynamic address reconciliation after DAA
- add preliminary API for hub support
- fixes for dev_nack_retry_count handling
- move hot-join support in the core instead of open coding in
different drivers
Drivers:
- mipi-i3c-hci-pci: DMA abort, recovery and related improvements,
hot-join support, Microchip SAMA7D65 support, fix possible race in
IBI handling
- dw-i3c-master: fix IBI count register selection for versalnet
- svc: interrupt handling fixes for NPCM845"
* tag 'i3c/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (45 commits)
i3c: mipi-i3c-hci: Use named initializers for platform_device_id's .driver_data
i3c: master: Use unsigned int for dev_nack_retry_count consistently
i3c: master: Add missing runtime PM get in dev_nack_retry_count_store()
i3c: master: Update dev_nack_retry_count under maintenance lock
i3c: master: Expose the APIs to support I3C hub
i3c: master: rename i3c_master_reattach_i3c_dev() to *_locked
i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk
dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible
i3c: Consistently define pci_device_ids using named initializers
i3c: master: Reconcile dynamic addresses after DAA
i3c: master: Move DAA API functions after i3c_master_add_i3c_dev_locked()
i3c: master: Make i3c_master_add_i3c_dev_locked() return void
i3c: mipi-i3c-hci: Tolerate i3c_master_add_i3c_dev_locked() failures in DAA
i3c: master: Prevent reuse of dynamic address on device add failure
i3c: mipi-i3c-hci: Ignore DISEC failures when disabling IBIs
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c: mipi-i3c-hci: Add Hot-Join support
i3c: master: Export i3c_master_enec_disec_locked()
i3c: master: Defer new-device registration out of DAA caller context
i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull more slab updates from Vlastimil Babka:
- Introduce and wire up a new alloc_flags parameter for modifying
slab-specific behavior without adding or reusing gfp flags. Also
introduce slab_alloc_context to keep function parameter bloat in
check. Both are similar to what the page allocator does.
kmalloc_flags() exposes alloc_flags for mm-internal users.
- SLAB_ALLOC_NOLOCK flag is used to implement kmalloc_nolock()
behavior without relying on lack of __GFP_RECLAIM, which caused
false positives with workarounds like fd3634312a04 ("debugobject:
Make it work with deferred page initialization - again").
- SLAB_ALLOC_NO_RECURSE replaces __GFP_NO_OBJ_EXT, which could have
been removed, but pending memory allocation profiling changes in
mm tree have grown a new user - there is however a work ongoing
to replace that too, so __GFP_NO_OBJ_EXT should eventually be
removed. (Vlastimil Babka)
- Add kmem_buckets_alloc_track_caller() with a user to be added in the
net tree (Pedro Falcato)
- Fixes for kernel-doc and slabinfo (Randy Dunlap, Yichong Chen)
* tag 'slab-for-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/mm/slabinfo: fix total_objects attribute name
slab: recognize @GFP parameter as optional in kernel-doc
mm/slab: add a node-track-caller variant for kmem buckets allocation
mm/slab: replace __GFP_NO_OBJ_EXT with SLAB_ALLOC_NO_RECURSE for sheaves
mm/slab: remove __GFP_NO_OBJ_EXT usage from alloc_slab_obj_exts()
mm/slab: introduce kmalloc_flags()
mm/slab: allow __GFP_NOMEMALLOC and __GFP_NOWARN for kmalloc_nolock()
mm/slab: pass slab_alloc_context to __do_kmalloc_node()
mm/slab: allow kmem_cache_alloc_bulk() with any gfp flags
mm/slab: replace slab_alloc_node() parameters with slab_alloc_context
mm/slab: pass alloc_flags through slab_post_alloc_hook() chain
mm/slab: pass alloc_flags to new slab allocation
mm/slab: add alloc_flags to slab_alloc_context
mm/slab: replace struct partial_context with slab_alloc_context
mm/slab: introduce alloc_flags and SLAB_ALLOC_NOLOCK
mm/slab: introduce slab_alloc_context
mm/slab: stop inlining __slab_alloc_node()
mm/slab: do not init any kfence objects on allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- consolidate s390 idle time accounting by moving all CPU time tracking
to the architecture backend and eliminate the mix of architecture-
specific and common code accounting
- Add missing EXPORT_SYMBOL_GPL() to kcpustat_field_idle() and
kcpustat_field_iowait() functions
- Finalize ptep_get() conversion by replacing direct page table entry
dereferencing with proper accessors (ptep_get(), pmdp_get(), etc.)
- Explicitly check the buffer length in PKEY_VERIFYPROTK ioctl and
pkey_pckmo implementations and fail if the length is exceeded
* tag 's390-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey: Check length in pkey_pckmo handler implementation
s390/pkey: Check length in PKEY_VERIFYPROTK ioctl
s390/idle: Add missing EXPORT_SYMBOL_GPL()
s390/mm: Complete ptep_get() conversion
s390/idle: Remove idle time and count sysfs files
s390/idle: Provide arch specific kcpustat_field_idle()/kcpustat_field_iowait()
s390/irq/idle: Use stcke instead of stckf for time stamps
s390/timex: Move union tod_clock type to separate header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
