summaryrefslogtreecommitdiff
path: root/include/linux/mfd
AgeCommit message (Collapse)Author
2012-03-16mfd: Add anatop mfd driverYing-Chun Liu (PaulLiu)
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Rob Lee <rob.lee@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Fix compilation error in tps65910.hVenu Byravarasu
'struct gpio_chip' is declared in include/asm-generic/gpio.h which is included by include/linux/gpio.h. However without including gpio.h, TPS65910.h declares a member of this type as part of 'struct tps65910' declaration. This causes compilation error, if gpio.h is not included before including tps65910.h, in source files. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Add 8420 variant to db8500-prcmuBengt Jonsson
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Add 8520 PRCMU variant to db8500-prcmuBengt Jonsson
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Mattias Nilssson <mattias.i.nilsson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Remove obsolete hwacc implementation for db8500-prmcuMattias Nilsson
This patch removes the obsolete hwacc implementation in the DB8500 PRCMU driver. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Add support for RICOH PMIC RC5T583Laxman Dewangan
Ricoh power management IC RC5T583 contains is multi functional device having multiple sub devices inside this. This device has multiple dcdc/ldo regulators, gpios, interrupt controllers, on-key, RTCs, ADCs. This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Make use of the ab8500 firmware read-modify-write serviceMattias Nilsson
This patch updates the AB8500 driver to make use of the I2C read-modify-write service in the PRCMU firmware. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Add a prcmu_abb_write_masked routine to db8500-prcmuMattias Nilsson
This patch adds driver support for the I2C read-modify-write service in the U8500 PRCMU firmware. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Support for the AB8500 AB8505 variantBengt Jonsson
This builds upon the changes done to support AB9540 so as also to support the AB8505 derivative of the AB8500 circuit. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Remove unused LDO supply field from WM8994 pdataMark Brown
It's causing confusion with the regulator level field of the same name and serves no useful function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Add platform data for MAX8997 haptic driverChanwoo Choi
MAX8997 device does not support haptic function of it. This patch adds platform data for for MAX8997 haptic driver. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16device.h: audit and cleanup users in main include dirPaul Gortmaker
The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-11regulator: tps65910: Sleep off rails when ext sleep configuredLaxman Dewangan
Keep the rails OFF in sleep mode only when the rails are controlled by external sleep control. The devices tps65910 and tps65911, both has the sleep input. The tps65911's sleep input is not same as tps65910's EN3 and hence taking care of SLEEP input as separate external sleep control input. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06mfd : Check if the other db8500 core is in WFIDaniel Lezcano
This patch allows to check if the other core is in WFI mode. It is the last check the idle routine has to do before entering into the retention state. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd : Check if the db8500 prcmu has pending irqDaniel Lezcano
This patch allows to check if there are some pending irqs on the prcmu. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd : Copy the db8500 gic setting to the prcmuDaniel Lezcano
In the case we go to the retention mode, we decoupled the gic in order to have the A9 core to reach a stable WFI state. But we want the prcmu to wake up the A9 when the gic has a pending irq which is done by copying the gic settings to the to the prcmu. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd : Check if there are pending irq on the db8500 gicDaniel Lezcano
This patch introduces a routine to check if there are some irqs pending on the gic. Usually this check is not relevant because it appears racy (an irq can arrive right after this check), but in the ux500 it makes sense because the prcmu decouples the gic from the A9 cores. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add power control interface for pm8606 chipJett.Zhou
The reference group and internal oscillator are shared by sub-devs like led, backlight and vibrator in PM8606 chip. Now introduce a voting mechanism to enable/disable it. Add pm8606_osc_enable() and pm8606_osc_disable() interface and related defines to support this. This interface will be called by vibrator led and backlight driver.The refernce group and internal oscillator are enabled only when at least one of it's clients holds it on or disabled only all the clients don't use it any more based on the above mechanism. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Use regmap for tps65910 register access.Laxman Dewangan
Using regmap apis for accessing the device registers and using RBTREE caching mechanims for caching registers. Enabling caching of the registers which is used for voltage controls. By doing this, the modify_bits operation is faster as it does not involve the i2c register read from device, just read from cache. This results faster set voltage operation. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add ability to wake the system for 88pm860xJett.Zhou
For 88pm860x pmic, it can wake the system from low power mode by irq, its sub-devs like RTC and onkey can be enabled for this usage. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Remove unused io_lock mutex from da9052Axel Lin
da9052 has been converted to use regmap API, so we can remove the unused io_lock mutex. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Decouple/recouple gic from the ux500 PRCMUDaniel Lezcano
This patch allows to decouple and recouple the gic from the PRCMU. This is needed to put the A9 core in retention mode with the cpuidle driver. It is based on top of the "DB8500 PRCMU update" patchset. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Rickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Support AB9540 ab8500 variantLinus Walleij
The AB9540 variant of the AB8500 is basically close enough to use the same driver. This adds the new registers and deviations for this new chip variant. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Parametrize ab8500 IRQ masks and registersLinus Walleij
This makes the AB8500 state struct contain the IRQ mask and register offsets previously hard-coded so as to make room for more AB8500 variants. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add ab8500 version detection and enforcingLinus Walleij
There are currently four different versions of the AB8500 around: AB8500, AB8505, AB9540 and AB8540. Unfortunately: - Some of the chips (AB8500, AB8505, AB9540) cannot read the AB8500_REV_REG register but return errors - Some of them have the same ID value in the hardware register AB8500_REV_REV, for example the first versions of AB8505 and AB9540 have 0xFF in this register - just like the AB8500. So we need to be able to enforce a certain version from the platform. We do this by using the id of the platform device that provides the read/write functions. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add support for no-interrupt stmpe configChris Blair
Adds support for boards which have an STMPE device without the interrupt pin connected. Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Chris Blair <chris.blair@stericsson.com> Tested-by: Michel Jaouen <michel.jaouen@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add initial db8500 prcmu register access apiMattias Nilsson
This patch adds an initial PRCMU register access API, which for now should only be used for a very limited set of registers. The idea about this API is that we split the PRCMU driver in one part that deals with interaction with the PRCMU firmware and one part that simply provide write accessors in the PRCMU register range. The latter are just a collection of registers exposed in the PRCMU register range for various purposes and not related to the PRCMU firmware. Currently we support some limited GPIO, SPI and UART settings through this API. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: db8500 OPP and sleep handling updateMattias Nilsson
This updates the operating point handling code by: - Supporting the DDR OPP retention state. - Supporting another low operating point named APE_50_PARTLY_25_OPP - Adding an interface to figure out if the sleep state change was properly achieved. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: db8500 clock handling updateMattias Nilsson
This updates the clock handling in the DB8500 PRCMU driver with the latest findings and API changes related to changes in the backing firmware in the PRCMU. - Add the necessary interfaces to get the frequencies of the clocks and set the rate of some of the clocks. - Add support for controlling the clocks PLLSOC0, PLLDSI, DSI0, DSI1 and DSI escape clocks (DSInESCCLK). - Correct the PLLSDI enable/disable sequence by using the DSIPLL_CLAMPI bit. After this we will have the interfaces and code to implement the U8500 clock framework properly. Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Update abstract dbx500 interfaceMattias Nilsson
This prefixes a number of accessor functions with db8500_* since they are DB8500-specific and we need to move to this naming scheme. We also replace numerous instances of machine_is() with cpu_is() which covers the right type of ASICs rather than entire machines i.e. boards. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Function for obtaining the db8500 prcmu firmware versionMattias Nilsson
This patch exports a function that can be used to tell which version of the DB8500 PRCMU firmware is available, and revamps the firmware detection code a bit. Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Remove db8500-prcmu U8400 legacyDaniel Willerud
This removes the U8400 legacy from PRCMU and cpufreq drivers. This platform has no current in-kernel users. Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add pdata to set mc13783-ts conversion delayMichael Thalmeier
MC13783 can be programmed to wait some clock cycles between the touchscreen polarization and the resistance conversion. This is needed to adjust for touchscreens with high capacitance between plates. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add new mfd device for TPS65217AnilKumar Ch
The TPS65217 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators - White LED - USB battery charger This patch adds support for tps65217 mfd device. At this time only the regulator functionality is made available. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-28Merge branch 'irqdomain/next' into gpio/nextGrant Likely
2012-02-22Merge branch 'for_3.4/gpio/runtime-pm-cleanup' of ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next
2012-02-21ASoC: wm8994: Support external capacitors on MICBIAS2 with jack detectionMark Brown
When an external capacitor is connected to MICBIAS2 on devices with jack detection (which is not required but may be done in some systems) then the loading may mean that better performance is obtained when the microphone bias is enabled normally rather than using the low power mode. Provide platform data allowing systems to indicate if they require this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-18MFD: ucb1x00-core: add wakeup supportRussell King
Add genirq wakeup support for the ucb1x00 device. This allows an attached gpio_keys driver to wakeup the system. Touchscreen is also possible. When there are no wakeup sources, ask the platform to assert the reset signal to avoid any unexpected behaviour; this also puts the reset signal at the right level when power is removed from the device. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: ucb1x00: convert to use genirqRussell King
Convert the ucb1x00 driver to use genirq's interrupt services, rather than its own private implementation. This allows a wider range of drivers to use the GPIO interrupts (such as the gpio_keys driver) without being aware of the UCB1x00's private IRQ system. This prevents the UCB1x00 core driver from being built as a module, so adjust the configuration to add that restriction. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: mcp-core: remove legacy driver suspend/resume methodsRussell King
The legacy driver suspend/resume methods are no longer used, so get rid of them. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: ucb1x00-core: convert to use dev_pm_opsRussell King
Convert the ucb1x00-core driver to use dev_pm_ops rather than the legacy members in the mcp driver. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: ucb1x00-core: use mutexes instead of semaphoresRussell King
Convert the ucb1x00 driver to use mutexes rather than the depreciated semaphores for exclusive access to the ADC. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: ucb1x00-core: add handling for ucb1x00 resetRussell King
Provide a way to handle the software controlled ucb1x00 reset signal from the ucb1x00-core driver without having to code platform specifics into these drivers. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: mcp/ucb1x00: separate ucb1x00 driver data from the MCP dataRussell King
Patch taken from 5dd7bf59e0 (ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.) by Jochen Friedrich <jochen@scram.de>. This adds just the codec data part of the patch. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-05gpio: tps65910: Add sleep control supportLaxman Dewangan
The device tps65910/tps65911 supports the sleep functionality in some of gpios. If gpio is configured in output mode and sleep is enabled then during device sleep state, the output of gpio becomes LOW regardless of non-sleep output value. Such gpio can be used to control regulator switch such that output of regulator is off in device sleep state. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-03mfd: Store twl6040-codec mclk configurationPeter Ujfalusi
Store the last used mclk configuration for the PLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-03MFD: mcp-sa11x0: remove DMA initializers and variablesRussell King
The dma_device_t variables are only ever written to by mcp-sa11x0 and never read. As the old SA11x0 DMA support will be removed, remove these so that it no longer depends on the old SA11x0 DMA definitions. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-03MFD: mcp-core: sanitize host creation/removalRussell King
host_unregister() gives us no chance between removing the device and the mcp data structure being freed to access the data inbetween, which drivers may need to do if they need to iounmap() pointers in their private data structures. Therefore, re-jig the interfaces, which are now, on creation: mcp = mcp_host_alloc() if (mcp) { ret = mcp_host_add(mcp, data); if (!ret) mcp_host_free(mcp); } and on removal: mcp_host_del(mcp); ... access mcp ... mcp_host_free(mcp); The free does the final put_device() on the struct device as one would expect. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-30regulator: tps65910: Sleep control through external inputsLaxman Dewangan
Add support for sleep controls of different regulator through external inputs EN1, EN2 or EN3. Each regulator's output will be active when its external input is high and turns to OFF/Low power mode when its external input is low. The configuration parameters for sleep control is provided through board specific platform data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21MFD: mcp-core: fix mcp_priv() to be more type safeRussell King
mcp_priv() does unexpected things when passed a void pointer. Make it a typed inline function, which ensures that it works correctly in these cases. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2026-01-27 12:29:25 +0000