| Age | Commit message (Collapse) | Author |
|---|
|
A PCIe device function interface assigned to a TVM is a TEE Device
Interface (TDI). A TDI instantiated by pci_tsm_bind() needs additional
steps taken by the TVM to be accepted into the TVM's Trusted Compute
Boundary (TCB) and transitioned to the RUN state.
pci_tsm_guest_req() is a channel for the guest to request TDISP collateral,
like Device Interface Reports, and effect TDISP state changes, like
LOCKED->RUN transititions. Similar to IDE establishment and pci_tsm_bind(),
these are long running operations involving SPDM message passing via the
DOE mailbox.
The path for a TVM to invoke pci_tsm_guest_req() is:
* TSM triggers exit via guest-to-host-interface ABI (implementation specific)
* VMM invokes handler (KVM handle_exit() -> userspace io)
* handler issues request (userspace io handler -> ioctl() ->
pci_tsm_guest_req())
* handler supplies response
* VMM posts response, notifies/re-enters TVM
This path is purely a transport for messages from TVM to platform TSM. By
design the host kernel does not and must not care about the content of
these messages. I.e. the host kernel is not in the TCB of the TVM.
As this is an opaque passthrough interface, similar to fwctl, the kernel
requires that implementations stay within the bounds defined by 'enum
pci_tsm_req_scope'. Violation of those expectations likely has market and
regulatory consequences. Out of scope requests are blocked by default.
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-8-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
After a PCIe device has established a secure link and session between a TEE
Security Manager (TSM) and its local Device Security Manager (DSM), the
device or its subfunctions are candidates to be bound to a private memory
context, a TVM. A PCIe device function interface assigned to a TVM is a TEE
Device Interface (TDI).
The pci_tsm_bind() requests the low-level TSM driver to associate the
device with private MMIO and private IOMMU context resources of a given TVM
represented by a @kvm argument. A device in the bound state corresponds to
the TDISP protocol LOCKED state and awaits validation by the TVM. It is a
'struct pci_tsm_link_ops' operation because, similar to IDE establishment,
it involves host side resource establishment and context setup on behalf of
the guest. It is also expected to be performed lazily to allow for
operation of the device in non-confidential "shared" context for pre-lock
configuration.
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-7-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The PCIe spec defines two types of streams - selective and link. Each
stream has an ID from the same bucket so a stream ID does not tell the
type. The spec defines an "enable" bit for every stream and required
stream IDs to be unique among all enabled stream but there is no such
requirement for disabled streams.
However, when IDE_KM is programming keys, an IDE-capable device needs
to know the type of stream being programmed to write it directly to
the hardware as keys are relatively large, possibly many of them and
devices often struggle with keeping around rather big data not being
used.
Walk through all streams on a device and initialise the IDs to some
unique number, both link and selective.
The weakest part of this proposal is the host bridge ide_stream_ids_ida.
Technically, a Stream ID only needs to be unique within a given partner
pair. However, with "anonymous" / unassigned streams there is no convenient
place to track the available ids. Proceed with an ida in the host bridge
for now, but consider moving this tracking to be an ide_stream_ids_ida per
device.
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-6-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The address ranges for downstream Address Association Registers need to
cover memory addresses for all functions (PFs/VFs/downstream devices)
managed by a Device Security Manager (DSM). The proposed solution is get
the memory (32-bit only) range and prefetchable-memory (64-bit capable)
range from the immediate ancestor downstream port (either the direct-attach
RP or deepest switch port when switch attached).
Similar to RID association, address associations will be set by default if
hardware sets 'Number of Address Association Register Blocks' in the
'Selective IDE Stream Capability Register' to a non-zero value. TSM drivers
can opt-out of the settings by zero'ing out unwanted / unsupported address
ranges. E.g. TDX Connect only supports prefetachable (64-bit capable)
memory ranges for the Address Association setting.
If the immediate downstream port provides both a memory range and
prefetchable-memory range, but the IDE partner port only provides 1 Address
Association Register block then the TSM driver can pick which range to
associate, or let the PCI core prioritize memory.
Note, the Address Association Register setup for upstream requests is still
uncertain so is not included.
Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Co-developed-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251114010227.567693-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Since both RK3576 and RK3588 SoCs are capable of handling 10 bpc color
depth, introduce a pair of new helpers to program the necessary
registers, as well as passing bpc at PHY configuration level.
Note max_bpc is unconditionally set to 10 before initializing the QP
bridge library, as there is no need to adjust it dynamically, i.e. per
SoC variant, for now.
While setting up .enc_init() callbacks of rockchip_hdmi_qp_ctrl_ops,
also replace the unnecessary whitespace chars before .irq_callback()
assignments.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-5-3d3eed00a6db@collabora.com
|
|
For consistency and improved readability, redefine a few RK3576 specific
register configurations by relying on GENMASK() and unshifted values for
color depth and output format. Those are not used at the moment, but
will be needed soon to support the related features.
While at it, drop a few other defines which are unlikely to be ever
required.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-4-3d3eed00a6db@collabora.com
|
|
Stop relying on phy_set_bus_width() based workaround to setup the TMDS
character rate and, instead, use the recently introduced HDMI PHY
configuration API. This is also a prerequisite to enable high color
depth and FRL support.
Additionally, move the logic to ->atomic_check() callback where the
current mode rate is already provided by the connector state. As a
matter of fact this is actually necessary to ensure the link rate is
configured before VOP2 attempts to use the PHY PLL as a DCLK source in
vop2_crtc_atomic_enable(). The rationale is to restrict any changes of
the PHY rate via CCF and, instead, prefer the PHY configuration API for
this purpose.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-3-3d3eed00a6db@collabora.com
|
|
Extend struct dw_hdmi_qp_plat_data to include the supported display
output formats and maximum bits per color channel. When provided by the
platform driver, use them to setup the HDMI bridge accordingly.
Additionally, improve debug logging in dw_hdmi_qp_bridge_atomic_enable()
to also show the current HDMI output format and bpc.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-2-3d3eed00a6db@collabora.com
|
|
When making use of the HDMI PHY PLL as a VOP2 DCLK source, it's output
rate does normally match the mode clock. But this is only applicable
for default color depth of 8 bpc. For higher depths, the output clock
is further divided by the hardware according to the formula:
output rate = PHY PLL rate * 8 / bpc
Hence there is no need for VOP2 to compensate for bpc when adjusting
DCLK, but it is required to do so when computing its maximum operating
frequency.
Take color depth into consideration before deciding to switch DCLK
source.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-1-3d3eed00a6db@collabora.com
|
|
during probing
The DRM_DEV_ERROR() has been deprecated, and use dev_err_probe()
can be better. The other reason is that dev_err_probe() help avoid
unexpected repeated err logs during defered probing.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251110075817.1159857-1-damon.ding@rock-chips.com
|
|
The name of the enable_gpio member in struct rockchip_hdmi_qp is too
generic, as initially "borrowed" from downstream BSP code. Moreover,
this hasn't been really in use so far, since there is neither a DT
providing an "enable-gpios" property to any of the "hdmi" nodes, nor a
binding documenting it.
The actual purpose of this GPIO line is to control the voltage bias for
the HDMI TX data lines when switching between TMDS and FRL operating
modes.
A previous patch introduced the "frl-enable-gpios" property of the
RK3588 HDMI TX Controller binding, hence pass the updated string to
devm_gpiod_get_optional(), rename the struct member accordingly and set
it to a low level.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251027222641.25066-3-laurent.pinchart@ideasonboard.com
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, amdgpu and vmwgfx making up the most of it, along with
panthor and i915/xe.
Seems about right for this time of development, nothing major
outstanding.
client:
- Fix description of module parameter
panthor:
- Flush writes before mapping buffers
vmwgfx:
- Improve command validation
- Improve ref counting
- Fix cursor-plane support
amdgpu:
- Disallow P2P DMA for GC 12 DCC surfaces
- ctx error handling fix
- UserQ fixes
- VRR fix
- ISP fix
- JPEG 5.0.1 fix
amdkfd:
- Save area check fix
- Fix GPU mappings for APU after prefetch
i915:
- Fix PSR's pipe to vblank conversion
- Disable Panel Replay on MST links
xe:
- New HW workarounds affecting PTL and WCL platforms
* tag 'drm-fixes-2025-11-15' of https://gitlab.freedesktop.org/drm/kernel:
drm/client: fix MODULE_PARM_DESC string for "active"
drm/i915/dp_mst: Disable Panel Replay
drm/amdkfd: Fix GPU mappings for APU after prefetch
drm/amdkfd: relax checks for over allocation of save area
drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1
drm/amd/amdgpu: Ensure isp_kernel_buffer_alloc() creates a new BO
drm/amd/display: Allow VRR params change if unsynced with the stream
drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_process
drm/amdgpu: jump to the correct label on failure
drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfaces
drm/xe/xe3lpg: Extend Wa_15016589081 for xe3lpg
drm/xe/xe3: Extend wa_14023061436
drm/xe/xe3: Add WA_14024681466 for Xe3_LPG
drm/i915/psr: fix pipe to vblank conversion
drm/panthor: Flush shmem writes before mapping buffers CPU-uncached
drm/vmwgfx: Restore Guest-Backed only cursor plane support
drm/vmwgfx: Use kref in vmw_bo_dirty
drm/vmwgfx: Validate command header size against SVGA_CMD_MAX_DATASIZE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- dw_mmc-rockchip: Fix internal phase calculation
- pxamci: Simplify and fix ->probe() error handling
- sdhci-of-dwcmshc: Fix strbin signal delay
- wmt-sdmmc: Fix compile test default
* tag 'mmc-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: dw_mmc-rockchip: Fix wrong internal phase calculate
mmc: pxamci: Simplify pxamci_probe() error handling using devm APIs
mmc: sdhci-of-dwcmshc: Change DLL_STRBIN_TAPNUM_DEFAULT to 0x4
mmc: wmt-sdmmc: fix compile test default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Fix reference count leak in ->remove()
- samsung: Rework legacy splash-screen handover workaround
- samsung: Fix potential memleak during ->probe()
- arm: Fix genpd leak on provider registration failure for scmi
* tag 'pmdomain-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: Fix reference count leak in imx_gpc_remove
pmdomain: samsung: Rework legacy splash-screen handover workaround
pmdomain: arm: scmi: Fix genpd leak on provider registration failure
pmdomain: samsung: plug potential memleak during probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Fix incorrect device handle check for Generic Initiator
- Fix offset calculation for extended linear cache poison injection
- Fix lockdep warning for hmem_register_resource()
* tag 'cxl-fixes-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
acpi/hmat: Fix lockdep warning for hmem_register_resource()
cxl: Adjust offset calculation for poison injection
acpi,srat: Fix incorrect device handle check for Generic Initiator
|
|
https://git.pengutronix.de/git/pza/linux into arm/fixes
Reset controller fixes for v6.18
* Fix incorrect EARC reset masks in the reset-imx8mp-audiomix driver,
introduced in commit a83bc87cd30a.
* tag 'reset-fixes-for-v6.18' of https://git.pengutronix.de/git/pza/linux:
reset: imx8mp-audiomix: Fix bad mask values
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes
Memory controller drivers - fixes for v6.18
Correct incorrect ID used for the memory controller client IDs in
Tegra210 Memory Controller driver, introduced in v6.18-rc1.
* tag 'memory-controller-drv-fixes-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra210: Fix incorrect client ids
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few standard fixes here, plus one more interesting one from Hans
which addresses an issue where a move in when we requested GPIOs on
ACPI systems caused us to stop doing pinmuxing and leave things
floating that we'd really rather not have floating"
* tag 'spi-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Add TODO comment about ACPI GPIO setup
spi: xilinx: increase number of retries before declaring stall
spi: imx: keep dma request disabled before dma transfer setup
spi: Try to get ACPI GPIO IRQ earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple fix for a GPIO descriptor leak in the probe error handling
for the fixed regulator"
* tag 'regulator-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: fix GPIO descriptor leak on register failure
|
|
Use new PM_RUNTIME_ACQUIRE() and PM_RUNTIME_ACQUIRE_ERR() wrapper macros
to make the code look more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
[ rjw; Typo fix in the changelog ]
Link: https://patch.msgid.link/3932581.kQq0lBPeGt@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use new PM_RUNTIME_ACQUIRE() and PM_RUNTIME_ACQUIRE_ERR() wrapper macros
to make the code look more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
[ rjw: Typo fix in the changelog ]
Link: https://patch.msgid.link/2040585.PYKUYFuaPT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The code incorrectly assumes that the VRAM save/restore fence is valid.
Fix it by checking for error.
Fixes: 49cf1b9b609fe ("drm/xe/pf: Handle VRAM migration data as part of PF control")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251114122339.1791026-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
The reference is only dropped on error. Fix it by adding the missing
xe_bo_put().
Fixes: 49cf1b9b609fe ("drm/xe/pf: Handle VRAM migration data as part of PF control")
Reported-by: Adam Miszczak <adam.miszczak@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251114100713.1776073-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Add support for booting and using NVJPG on Tegra210 to the Host1x
and TegraDRM drivers. This driver only supports the new TegraDRM uAPI.
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250630-diogo-nvjpg-v3-1-a553c7e91354@tecnico.ulisboa.pt
|
|
PCIe r7.0, sec 7.8.6, defines resizable BAR sizes beyond the currently
supported maximum of 128TB, which will require more than u32 to store the
entire bitmask.
Convert Resizable BAR related functions to use u64 bitmask for BAR sizes to
make the typing more future-proof.
The support for the larger BAR sizes themselves is not added at this point.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-12-ilpo.jarvinen@linux.intel.com
|
|
Use pci_rebar_get_max_size() to simplify amdgpu_device_resize_fb_bar().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-11-ilpo.jarvinen@linux.intel.com
|
|
Use pci_rebar_get_max_size() from PCI core in resize_vram_bar() to simplify
code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-10-ilpo.jarvinen@linux.intel.com
|
|
Add pci_rebar_get_max_size() to allow simplifying code that wants to know
the maximum possible size for a Resizable BAR.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-9-ilpo.jarvinen@linux.intel.com
|
|
PCI core provides pci_rebar_size_supported() and pci_rebar_size_to_bytes();
use them in resize_vram_bar() to simplify code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-8-ilpo.jarvinen@linux.intel.com
|
|
PCI core provides pci_rebar_size_supported() that helps in checking if an
encoded BAR Size is supported for the BAR or not. Use it in
i915_resize_lmem_bar() to simplify code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-7-ilpo.jarvinen@linux.intel.com
|
|
Many callers of pci_rebar_get_possible_sizes() are interested in finding
out if a particular encoded BAR Size (PCIe r7.0, sec 7.8.6.3) is supported
by the particular BAR.
Add pci_rebar_size_supported() into PCI core to make it easy for the
drivers to determine if the BAR size is supported or not.
Use the new function in pci_resize_resource() and in
pci_iov_vf_bar_set_size().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patch.msgid.link/20251113180053.27944-6-ilpo.jarvinen@linux.intel.com
|
|
Fix the copy-pasted errors in the Resizable BAR handling functions kernel
doc and generally improve wording choices.
Fix the formatting errors of the Return: line.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-5-ilpo.jarvinen@linux.intel.com
|
|
pci_rebar_size_to_bytes() is in drivers/pci/pci.h but would be useful for
endpoint drivers as well.
Move the function to rebar.c and export it.
In addition, convert the literal to where the number comes from
(PCI_REBAR_MIN_SIZE).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-4-ilpo.jarvinen@linux.intel.com
|
|
Move pci_rebar_bytes_to_size() from include/linux/pci.h to rebar.c as it
does not look very trivial and is not expected to be performance critical.
Convert literals to use a newly added PCI_REBAR_MIN_SIZE define.
Also add kernel doc for the function as the function is exported.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <mjruhl@habana.ai>
Link: https://patch.msgid.link/20251113180053.27944-3-ilpo.jarvinen@linux.intel.com
|
|
For lack of a better place to put it, Resizable BAR code has been placed
inside pci.c and setup-res.c that do not use it for anything. Upcoming
changes are going to add more Resizable BAR related functions, increasing
the code size.
As pci.c is huge as is, move the Resizable BAR related code and the BAR
resize code from setup-res.c to rebar.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-2-ilpo.jarvinen@linux.intel.com
|
|
restore_dev_resource() copies saved addresses and flags from the struct
pci_dev_resource back to the struct resource, typically, during rollback
from a failure or in preparation for a retry attempt.
If the resource is within resource tree, the resource must not be
modified as the resource tree could be corrupted. Thus, it's a bug to
call restore_dev_resource() for assigned resources (which did happen
due to logic flaws in the BAR resize rollback).
Add WARN_ON_ONCE() into restore_dev_resource() to detect such bugs easily
and return without altering the resource to prevent corruption.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-12-ilpo.jarvinen@linux.intel.com
|
|
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the amdgpu driver.
Also remove the driver initiated assignment as pci_resize_resource() should
try to assign as much as possible. If the driver side call manages to get
more required resources assigned in some scenario, such a problem should be
fixed inside pci_resize_resource() instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-11-ilpo.jarvinen@linux.intel.com
|
|
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the i915 driver.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251113162628.5946-10-ilpo.jarvinen@linux.intel.com
|
|
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the xe driver.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251113162628.5946-9-ilpo.jarvinen@linux.intel.com
|
|
As pci_resize_resource() is meant to be used also outside of PCI core,
document the interface with kerneldoc.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-8-ilpo.jarvinen@linux.intel.com
|
|
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https://lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
|
|
Freeing the saved list does not require holding pci_bus_sem, so the
critical section can be made shorter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-6-ilpo.jarvinen@linux.intel.com
|
|
Usually, resizing BARs requires releasing bridge windows in order to
resize it to fit a larger BAR into the window. This is not always the
case, however, FW could have made the window large enough to accommodate
larger BAR as is, or the user might prefer to shrink a BAR to make more
space for another Resizable BAR.
Thus, replace the check that requires that at least one bridge window
was released with a check that simply ensures bridge is not NULL.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-5-ilpo.jarvinen@linux.intel.com
|
|
Upcoming fix to BAR resize will store also device BAR resource in the
saved list. Change the pci_dev variable in the loop from 'bridge' to
'dev' as the former would be misleading with non-bridges in the list.
This is in a separate change to reduce churn in the upcoming BAR resize
fix.
While it appears that the logic in the loop doing pci_setup_bridge() is
altered as 'bridge' variable is no longer updated, a bridge should never
appear more than once in the saved list so the check can only match to the
first entry. As such, the code with two distinct pci_dev variables better
represents the intention of the check compared with the old code where
bridge variable was reused for a different purpose.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://patch.msgid.link/20251113162628.5946-4-ilpo.jarvinen@linux.intel.com
|
|
pci_rebar_set_size() adjusts BAR size for both normal and IOV BARs. The
struct pci_sriov keeps a cached copy of BAR size in ->barsz[] which is not
adjusted by pci_rebar_set_size() but by pci_iov_resource_set_size().
pci_iov_resource_set_size() is called also from
pci_resize_resource_set_size().
The current arrangement is problematic once BAR resize algorithm starts to
roll back changes properly in case of a failure. The normal resource
fitting algorithm rolls back resource size using the struct
pci_dev_resource easily but also calling pci_resize_resource_set_size() or
pci_iov_resource_set_size() to roll back BAR size would be an extra burden,
whereas combining ->barsz[] update with pci_rebar_set_size() naturally
rolls back it when restoring the old BAR size on a different layer of the
BAR resize operation.
Thus, rework pci_rebar_set_size() to also update ->barsz[].
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-3-ilpo.jarvinen@linux.intel.com
|
|
pbus_reassign_bridge_resources() saves bridge windows into the saved
list before attempting to adjust resource assignments to perform a BAR
resize operation. If resource adjustments cannot be completed fully,
rollback is attempted by restoring the resource from the saved list.
The rollback, however, does not check whether the resources it restores were
assigned by the partial resize attempt. If restore changes addresses of the
resource, it can result in corrupting the resource tree.
An example of a corrupted resource tree with overlapping addresses:
6200000000000-6203fbfffffff : pciex@620c3c0000000
6200000000000-6203fbff0ffff : PCI Bus 0030:01
6200020000000-62000207fffff : 0030:01:00.0
6200000000000-6203fbff0ffff : PCI Bus 0030:02
A resource that are assigned into the resource tree must remain
unchanged. Thus, release such a resource before attempting to restore
and claim it back.
For simplicity, always do the release and claim back for the resource
even in the cases where it is restored to the same address range.
Note: this fix may "break" some cases where devices "worked" because
the resource tree corruption allowed address space double counting to
fit more resource than what can now be assigned without double
counting. The upcoming changes to BAR resizing should address those
scenarios (to the extent possible).
Fixes: 8bb705e3e79d ("PCI: Add pci_resize_resource() for resizing BARs")
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/67840a16-99b4-4d8c-9b5c-4721ab0970a2@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-2-ilpo.jarvinen@linux.intel.com
|
|
Supported policy bits are dependent on the level of SEV firmware that is
currently running. Create an API to return the supported policy bits for
the current level of firmware.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/e3f711366ddc22e3dd215c987fd2e28dc1c07f54.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add USB wake events for Tegra234 so that system can be woken up from
suspend when USB devices hot-plug/unplug event is detected.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
- Simplify cxl_rd_ops allocation
- Group xor arithmetric setup code
- Remove local variable @inc in cxl_port_setup_targets()
|
|
Calculate packet parameters for video mode same way it is done for
command mode, by halving timings plugged into equations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250909073335.91531-3-clamor95@gmail.com
|
