| Age | Commit message (Collapse) | Author |
|---|
|
The entire 32 bit did_vid is read from the device, but only the 16 bit
vendor id portion was stored in the tpm_tis_data structure. Storing the
entire value allows the device id to be used to handle quirks. Printing
the vid and did in the error case also helps identify problem devices.
Signed-off-by: Jim Broadus <jbroadus@gmail.com>
Link: https://lore.kernel.org/r/20260526232245.5409-2-jbroadus@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
tpm_crb driver.
Fixes: 48fe2cddc85c ("tpm_crb: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2848144.mvXUDI8C0e@rafael.j.wysocki
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
wait_event_interruptible_timeout() evaluates its condition after setting
the current task state to TASK_INTERRUPTIBLE.
With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait
path is used:
tpm_tis_status()
tpm_tis_spi_read_bytes()
tpm_tis_spi_transfer_full()
spi_bus_lock()
mutex_lock()
Address this with the following measures:
1. Call wait_tpm_stat_cond() only while tasking is running.
2. Use wait_woken() to wait for changes.
Cc: stable@vger.kernel.org # v4.19+
Cc: Linus Walleij <linusw@kernel.org>
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Closes: https://lore.kernel.org/linux-integrity/6964bec7-3dbb-453b-89ef-9b990217a8b9@gmx.net/
Fixes: 1a339b658d9d ("tpm_tis_spi: Pass the SPI IRQ down to the driver")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_buf_append_name() supports callers passing a pre-computed name
for handles. When name is non-NULL, the code skips the
tpm2_read_public() path but leaves name_size_alg uninitialized
before it is used as the memcpy size argument.
No current in-tree caller passes a non-NULL name, but future use
cases such as name caching would exercise this path. Initialize
name_size_alg by calling name_size() on the caller-provided name,
sharing the error check and assignment with the existing
tpm2_read_public() path. This prevents unmasking a latent bug when
the non-NULL name path is eventually used.
Assisted-by: Kiro:claude-opus-4.6
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Muhammad Hammad Ijaz <mhijaz@amazon.com>
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Link: https://lore.kernel.org/r/20260510171152.4607-1-gunnarku@amazon.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Commit 207696b17f38 ("tpm: use a map for tpm2_calc_ordinal_duration()")
inadvertently reduced the timeout for TPM2 key creation commands
(`CREATE_PRIMARY`, `CREATE`, `CREATE_LOADED`) from 300 seconds to 30
seconds.
This causes intermittent timeout failures, with several failures observed
across hundreds of test runs on some Intel platforms using Infineon
SLB9670 and SLB9672 TPM modules. Restore the timeout to 300 seconds to
avoid spurious failures.
Cc: stable@vger.kernel.org # v6.18+
Fixes: 207696b17f38 ("tpm: use a map for tpm2_calc_ordinal_duration()")
Co-developed-by: Lili Li <lili.li@intel.com>
Signed-off-by: Lili Li <lili.li@intel.com>
Signed-off-by: Baoli Zhang <baoli.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20260421005021.13765-1-baoli.zhang@linux.intel.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Constify the SVSM vTPM ops. It is statically initialized and never
written to, so let's store it in .rodata.
Every other tpm_class_ops instance in drivers/char/tpm/ is already
const.
Signed-off-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20260505202738.145800-1-dwindsor@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way.
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Link: https://patch.msgid.link/20260618025735.915113-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
KCSAN reports a data race between raid1_end_read_request() and
raid1_read_request().
The completion path updates conf->mirrors[disk].head_position in
update_head_pos() without a lock, while the read-balance heuristic reads
the same field locklessly in is_sequential() and choose_best_rdev().
KCSAN report:
=========================
BUG: KCSAN: data-race in raid1_end_read_request / raid1_read_request
write to 0xffff8f0306ba7868 of 8 bytes by interrupt on cpu 9:
raid1_end_read_request+0xb5/0x440
bio_endio+0x3c9/0x3e0
blk_update_request+0x257/0x770
scsi_end_request+0x4d/0x520
scsi_io_completion+0x6f/0x990
scsi_finish_command+0x188/0x280
scsi_complete+0xac/0x160
blk_complete_reqs+0x8e/0xb0
blk_done_softirq+0x1d/0x30
[...]
read to 0xffff8f0306ba7868 of 8 bytes by task 667002 on cpu 11:
raid1_read_request+0x497/0x1a10
raid1_make_request+0xdf/0x1950
md_handle_request+0x2c5/0x700
md_submit_bio+0x126/0x320
__submit_bio+0x2ec/0x3a0
submit_bio_noacct_nocheck+0x572/0x890
[...]
value changed: 0x0000000000000078 -> 0x00000000005fe448
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Link: https://patch.msgid.link/20260619044114.1208456-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
When a read is retried, raid1_read_request() may be called with a
pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT
read, the bio is completed and the function returns immediately. In this
case the existing r1_bio is leaked.
This fixes a leak of pre-allocated r1_bio structures for retried reads.
Fixes: 5aa705039c4f ("md: raid1 add nowait support")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260611083514.754922-1-abd.masalkhi@gmail.com?part=1
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260611101350.759154-1-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid1 supports REQ_NOWAIT reads by avoiding waits in the barrier path
through wait_read_barrier(). However, a read can still block on a
WriteMostly device when the array uses a bitmap and there are
outstanding behind writes.
In that case raid1 unconditionally calls wait_behind_writes(), which
may sleep until all behind writes complete. As a result, a REQ_NOWAIT
read can block despite the caller explicitly requesting non-blocking
behavior.
This ensures that raid1 consistently honors REQ_NOWAIT reads across all
paths that may otherwise wait for behind writes.
Fixes: 5aa705039c4f ("md: raid1 add nowait support")
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260611083514.754922-1-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
llbitmap discard is useful even when no underlying member device supports
it. The discard still converts the llbitmap range to unwritten, so later
reads and recovery do not rely on stale parity for that range.
Let llbitmap discard bypass the raid5 lower discard support check. If lower
discard is not safe or not supported, complete the accounted clone after
md_account_bio() so the llbitmap conversion callbacks run without member
discard bios.
Link: https://patch.msgid.link/20260605072639.2434847-4-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
Raid5 used to disable discard limits when devices_handle_discard_safely
was not set or when stacked member limits could not support a full-stripe
discard. That hides discard from userspace before raid5 can decide whether
a request can be handled safely.
Follow other virtual drivers and advertise a UINT_MAX discard limit for the
md device. Cache lower discard support in r5conf when setting queue limits,
and reject unsupported discard bios before queuing stripe work.
Link: https://patch.msgid.link/20260605072639.2434847-3-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
Raid5 handles discard bios internally through make_discard_request() and
never passes them through md_account_bio(). As a result, discard IO is
missing the md-device iostat accounting that normal raid5 IO and discard
IO in other raid levels get from md_account_bio().
Before accounting the bio, trim the request to the full data stripes that
raid5 will actually discard. The first full stripe is the ceiling of the
bio start divided by data-stripe sectors, and the last full stripe is the
floor of the bio end divided by data-stripe sectors. Account that exact
MD logical full-stripe range, then restore the original iterator so bio
completion and iostat still cover the original request.
Link: https://patch.msgid.link/20260605072639.2434847-2-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid1_write_request() increments rdev->nr_pending before checking the
badblocks and then immediately decrements it again when a device is
skipped. Move the increment until after the checks succeed so the
reference accounting is easier to follow.
Consolidate the failure paths so that each error label releases exactly
the resources acquired up to that point. err_dec_pending drops pending
references and frees the r1bio, while err_allow_barrier handles the
barrier release before returning.
When a REQ_ATOMIC write cannot be satisfied due to a badblock range,
complete the bio with BLK_STS_NOTSUPP rather than reporting an I/O
error, since the operation is unsupported rather than having failed
during I/O.
Rename max_write_sectors to max_sectors and remove the redundant local
copy.
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260613182810.1317258-5-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths.
Fixes: c9aa889b035f ("md: raid10 add nowait support")
Fixes: 4cf58d952909 ("md/raid10: Handle bio_split() errors")
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260613182810.1317258-4-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid10_make_request() acquires a writes_pending reference with
md_write_start() before dispatching write requests. Several failure
paths in raid10_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid10_write_request() return a status indicating whether the write
request was successfully queued. This allows raid10_make_request() to
release the writes_pending reference with md_write_end() when a write
request fails.
Fixes: 4cf58d952909 ("md/raid10: Handle bio_split() errors")
Fixes: c9aa889b035f ("md: raid10 add nowait support")
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260613182810.1317258-3-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid1_make_request() acquires a writes_pending reference with
md_write_start() before calling raid1_write_request(). Several failure
paths in raid1_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid1_write_request() return a status indicating whether the write
request was successfully queued. This allows raid1_make_request() to
call md_write_end() when raid1_write_request() fails.
Additionally, if wait_blocked_rdev() fails after wait_barrier()
succeeds, the associated barrier reference is not released.
Call allow_barrier() before returning from that path to keep the barrier
accounting balanced.
Fixes: b1a7ad8b5c4f ("md/raid1: Handle bio_split() errors")
Fixes: f2a38abf5f1c ("md/raid1: Atomic write support")
Fixes: 5aa705039c4f ("md: raid1 add nowait support")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260611083514.754922-1-abd.masalkhi@gmail.com?part=1
Closes: https://sashiko.dev/#/patchset/20260611132500.763528-1-abd.masalkhi@gmail.com?part=1
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260613182810.1317258-2-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- New EC driver providing battery info for Microsoft Surface RT
- New driver for battery charger in Samsung S2M PMICs
- Rework max17042 driver
- sysfs control for bd71828 auto input current limitation
All over:
- Use named fields for struct platform_device_id and of_device_id
entries
- Misc small cleanups and fixes"
* tag 'for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
Documentation: ABI: sysfs-class-reboot-mode-reboot_modes: fix doc warnings
power: supply: charger-manager: fix refcount leak in is_full_charged()
power: supply: core: fix supplied_from allocations
power: supply: max17042_battery: Use modern PM ops to clear up warning
power: supply: add support for Samsung S2M series PMIC charger device
power: supply: Add support for Surface RT battery and charger
dt-bindings: embedded-controller: Document Surface RT EC
power: supply: bd71828: sysfs for auto input current limitation
power: supply: cpcap-charger: include missing <linux/property.h>
power: supply: cros_charge-control: Move MODULE_DEVICE_TABLE next to the table itself
power: supply: ab8500_fg: Fix typos in comments
power: supply: Use named initializers for arrays of i2c_device_data
power: supply: Remove unused jz4740-battery.h
power: reset: st-poweroff: Use of_device_get_match_data()
power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states
power: supply: bq257xx: Consistently use indirect get/set helpers
power: supply: bq257xx: Make the default current limit a per-chip attribute
power: supply: bq257xx: Fix VSYSMIN clamping logic
power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak
power: supply: max17042: fix OF node reference imbalance
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull strncpy removal from Kees Cook:
- Remove the per-arch strncpy implementations in alpha, m68k, powerpc,
x86, and xtensa
- Remove strncpy API
Over the last 6 years working on strncpy removal there were 362
commits by 70 contributors. Folks with more than 1 commit were:
211 Justin Stitt <justinstitt@google.com>
22 Xu Panda <xu.panda@zte.com.cn>
21 Kees Cook <kees@kernel.org>
17 Thorsten Blum <thorsten.blum@linux.dev>
12 Arnd Bergmann <arnd@arndb.de>
4 Pranav Tyagi <pranav.tyagi03@gmail.com>
4 Lee Jones <lee@kernel.org>
2 Steven Rostedt <rostedt@goodmis.org>
2 Sam Ravnborg <sam@ravnborg.org>
2 Marcelo Moreira <marcelomoreira1905@gmail.com>
2 Krzysztof Kozlowski <krzk@kernel.org>
2 Kalle Valo <kvalo@kernel.org>
2 Jaroslav Kysela <perex@perex.cz>
2 Daniel Thompson <danielt@kernel.org>
2 Andrew Lunn <andrew@lunn.ch>
* tag 'strncpy-removal-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string: Remove strncpy() from the kernel
xtensa: Remove arch-specific strncpy() implementation
x86: Remove arch-specific strncpy() implementation
powerpc: Remove arch-specific strncpy() implementation
m68k: Remove arch-specific strncpy() implementation
alpha: Remove arch-specific strncpy() implementation
|
|
ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange
a kmalloc'd buffer pointer through a struct kfifo, but pass a literal
'4' as the byte count to kfifo_in()/kfifo_out().
This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the
low 4 bytes of the 8-byte pointer are written into the FIFO. The reader
then reads back 4 bytes into an 8-byte local pointer variable, leaving
the upper 4 bytes uninitialized stack data. The first dereference of
the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel
address and generally results in an oops.
Use sizeof(fifo_buffer) so the byte count matches pointer width on every
architecture.
The driver has no architecture restriction in Kconfig, so any 64-bit
build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has
been latent since the driver was added in 2017 because it is most
commonly deployed on 32-bit MCUs.
Found via a custom Coccinelle semantic patch hunting for short-byte
kfifo I/O on byte-mode kfifos used to shuttle pointers.
Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/20260520105750.30144-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC)
and relies entirely on the SPI completion callback
ca8210_spi_transfer_complete() to free it.
The spi_async() API only invokes the completion callback on successful
submission. On failure it returns a negative error code without ever
queuing the callback, which leaves cas_ctl and its embedded spi_message
and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is
inside the completion callback, so there is no other reclamation path.
ca8210_spi_transfer() is called from ca8210_spi_exchange(), the
interrupt handler ca8210_interrupt_handler(), and from the retry path
inside the completion callback itself. The exchange and interrupt
handler paths loop on -EBUSY, so under sustained SPI bus contention
every retry iteration leaks a fresh cas_ctl (~600 bytes per
occurrence).
Fix it by freeing cas_ctl on the spi_async() error path. While here,
correct the misleading error string: the function calls spi_async(),
not spi_sync().
Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/20260421073259.2259783-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Before commit a1a69b297e47 ("ACPI / IPMI: Fix race caused by the
unprotected ACPI IPMI user"), ipmi_bmc_gone() skipped entries whose
interface number did not match the SMI being removed, then killed the
matching entry:
if (ipmi_device->ipmi_ifnum != iface)
continue;
__ipmi_dev_kill(ipmi_device);
That commit folded the removal block into the existing non-match test
while converting the object lifetime handling, but left the comparison
unchanged. The old != meant "continue past this entry"; after the
refactor it meant "kill this entry".
As a result, a single ACPI IPMI interface is never removed when its SMI
disappears. If multiple interfaces are tracked, the first interface
whose number differs from iface is removed instead, while the interface
that actually disappeared remains on driver_data.ipmi_devices. The
stale entry is not marked dead and can continue to be selected for ACPI
IPMI transactions. It can also prevent the same ACPI handle from being
registered again.
Change the comparison to == so ipmi_bmc_gone() removes exactly the
interface reported as gone by the SMI watcher. This restores the
pre-a1a69b297e47 behavior and is the correct interface matching logic.
Fixes: a1a69b297e47 ("ACPI / IPMI: Fix race caused by the unprotected ACPI IPMI user")
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/B486593E06E6F6E0+20260616093621.1039943-1-raoxu@uniontech.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The functions are referred as func() in the kernel-doc. The % (percent)
character makes the rendering for constants as described in the respective
documentation. Amend all these.
Fixes: 8e345c991c8c ("ACPI: Centralized processing of ACPI device resources")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260617090555.2648709-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The correct path of module parameters should be
/sys/module/acpi/parameters/xxx. Fix them.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260611142518.77343-1-zenghui.yu@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The function thermal_throttle_add_dev() may fail and abort a CPU hotplug
online operation. Since the failure occurs within the online callback,
thermal_throttle_online(), the CPU hotplug framework does not invoke the
corresponding offline callback. As a result, the hardware and software
resources set up during the failed operation are not torn down.
Since only thermal_throttle_add_dev() can fail, call it before setting up
the rest of the resources.
Fixes: f6656208f04e ("x86/mce/therm_throt: Optimize notifications of thermal throttle")
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20260613-rneri-directed-therm-intr-v3-1-3a26d1e47fc8@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
|
The PMIC PCA9451A and PCA9452 have a default power-off debounce time of
2ms according to their datasheet, while PCA9450A and PCA9450BC use 120us.
Add default_t_off_deb field to struct pca9450 to support per-variant
default configuration when the device tree property is not specified.
Datasheet reference links:
- PCA9451A Rev.2.1: https://www.nxp.com/docs/en/data-sheet/PCA9451A.pdf
- PCA9452 Rev.1.0: https://www.nxp.com/docs/en/data-sheet/PCA9452.pdf
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260618-b4-regulator-opt-v1-1-c43b1f62aaf6@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new compatible entry "snps,dwc-ssi-2.00a" for the Synopsys
DesignWare SSI controller version 2.00a. This variant uses the same
initialization routine as snps,dwc-ssi-1.01a (dw_spi_hssi_init).
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://patch.msgid.link/20260619143443.22267-3-changhuang.liang@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"arm64:
This is a bit of an odd merge window on the KVM/arm64 front. There
is absolutely no new feature in the pull request. It is purely
fixes, because it is simply becoming too hard to review new stuff
when so many AI-fuelled fixes hit the list.
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed as well
- Large set of pKVM fixes, mostly addressing recurring issues around
hypervisor tracking of donated pages in obscure cases where the
donation could fail and leave things in a bizarre state
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned out to
be far more invasive than initially expected..
- Reduce the overhead of L1/L2 context switch by not touching the FP
registers
- Fix the way non-implemented page sizes are dealt with when a guest
insist on using them for S2 translation
- The usual set of low-impact fixes and cleanups all over the map
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX) that
caused the FPU load request
- Some enhancements about interrupt injection
- Some bug fixes and other small changes
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic PTE
updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on a
memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both of
these are preparatory changes for upcoming APX support
- Clean up KVM's register tracking and storage, primarily to prepare
for APX support, which expands the maximum number of GPRs from 16
to 32
- Keep a single copy of the PDPTRs rather than two, since
architecturally there is just one
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor
code gets a chance to handle things like reaping the PML buffer
- Update KVM's view of PV async enabling if and only if the MSR write
fully succeeds
- Fix a variety of issues where the emulator doesn't honor
guest-debug state, and clean up related code along the way
- Synthesize EPT Violation and #NPF "error code" bits when injecting
faults into L1 that didn't originate in hardware (in which case the
VMCS/VMCB doesn't hold relevant information)
- Add support for virtualizing (well, emulating) AMD's flavor of
CPL>0 CPUID faulting
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and
fix a variety of minor bugs along the way
- Fix an OOB memory access due to not checking the VP ID when
handling a Hyper-V PV TLB flush for L2
- Fix a bug in the mediated PMU's handling of fixed counters that
allowed the guest to bypass the PMU event filter
- Allow userspace to return EAGAIN when handling SNP and TDX
hypercalls, so the KVM can forward a "retry" status code to the
guest, and reserve all unused error codes for future usage
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific
logic as possible into the TDX code, and to funnel (almost) all
S-EPT updates into a single chokepoint. The motivation is largely
to prepare for upcoming Dynamic PAMT support, but the cleanups are
nice to have on their own
- Plug a hole in shadow page table handling, where KVM fails to
recursively zap nested EPT/NPT shadow page tables when the nested
hypervisor tears down its own EPT/NPT page tables from the bottom
up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in
the generic section; also run with MBEC enabled even for non-nested
mode
- Use the kernel's "enum pg_level" in the TDX APIs instead of the
TDX-Module's level definitions (which are 0-based)
- Rework the TDX memory APIs to not require/assume that guest memory
is backed by "struct page" (in prepartion for guest_memfd hugepage
support)
- Fix a largely benign bug where KVM TDX would incorrectly state it
could emulate several x2APIC MSRs
- Use the "safe" WRMSR API when proxying LBR MSR writes as the
to-be-written value is guest controlled and completely unvalidated
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in
the generic section; also run with GMET enabled even for non-nested
mode
- Fixes and minor cleanups to GHCB handling, on top of the earlier
work already merged into 7.1-rc
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers
- Add support for virtualizing gPAT (KVM previously just used L1's
PAT when running L2)
- Fix goofs where KVM mishandles side effects (e.g. single-step and
PMC updates) when emulating VMRUN
- Fix a variety of bugs in AVIC's handling of x2APIC MSR
interception, most notably where KVM didn't disable interception of
IRR, ISR, and TMR regs
- Add support for virtualizing Host-Only/Guest-Only bits in the
mediated PMU
- Don't advertise support for unusable VM types, and account for VM
types that are disabled by firmware, e.g. to mitigate security
vulnerabilities
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with
bugs and unnecessarily complicated, and add comprehensive tests
- Clean up and deduplicate the SEV page pinning code
- Fix minor goofs related to writing back CPUID information after
firmware rejects a CPUID page for an SNP vCPU
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to
follow the kernel's nomenclature, e.g. for mmu_notifiers
- Use guard() to cleanup up various KVM+VFIO flows
- Minor cleanups
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a
gmem range to multiple memslots, and fix the test that was supposed
to ensure KVM returns -EEXIST
- Treat memslot binding offsets and sizes as unsigned values to fix a
bug where KVM interprets a large "offset + size" as a negative
value and allows a nonsensical offset
- Use the inode number instead of the page offset for the NUMA
interleaving index to fix a bug where the effective index would
jump by two for consecutive pages (the caller also adds in the page
offset)
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the
first pass, as always waiting only 1ms hid a KVM RISC-V bug as the
test reaped the bitmap before KVM could build up enough state to
hit the bug
- A pile of one-off fixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (326 commits)
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
KVM: x86: Fix shadow paging use-after-free due to unexpected role
KVM: s390: Introducing kvm_arch_set_irq_inatomic fast inject
KVM: s390: Enable adapter_indicators_set to use mapped pages
KVM: s390: Add map/unmap ioctl and clean mappings post-guest
riscv: kvm: Use endian-specific __lelong for NACL shared memory
KVM: selftests: access_tracking_perf_test: bump number of NUMA nodes to 32
KVM: s390: vsie: Implement ASTFLEIE facility 2
KVM: s390: vsie: Refactor handle_stfle
s390/sclp: Detect ASTFLEIE 2 facility
KVM: s390: Minor refactor of base/ext facility lists
KVM: x86/mmu: move pdptrs out of the MMU
KVM: x86: check that kvm_handle_invpcid is only invoked with shadow paging
KVM: nSVM: invalidate cached PDPTRs across nested NPT transitions
KVM: nVMX: remove unnecessary code in prepare_vmcs02_rare
KVM: x86: remove nested_mmu from mmu_is_nested()
KVM: arm64: vgic-its: Make ABI commit helpers return void
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
LoongArch: KVM: Add missing slots_lock for device register/unregister
LoongArch: KVM: Validate irqchip index in irqfd routing
...
|
|
Explicitly check the length of the target buffer in the pkey_pckmo
implementation of the key_to_protkey() handler function. The handler
function fails, if the generated output data exceeds the length of the
provided target buffer.
Cc: stable@vger.kernel.org
Fixes: 8fcc231ce3be ("s390/pkey: Introduce pkey base with handler registry and handler modules")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Explicitly check the buffer length request structure provided by
user-space and fail, if it exceeds the buffer size.
Cc: stable@vger.kernel.org
Fixes: 8fcc231ce3be ("s390/pkey: Introduce pkey base with handler registry and handler modules")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current
This pulls in the merge commit for MFD updates for v7.2. The PR contains
a build-time dependency of one of the GPIO commits that will follow.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove a redundant IS_ERR() check
trace_pipe_open() already checks for IS_ERR() and does it again in
the return path. Remove the return check.
- Export seq_buf_putmem_hex() to allow kunit tests against them
To add Kunit tests on seq_buf_putmem_hex(), it needs to be exported.
- Replace strcat() and strcpy() with seq_buf() logic
The code for synthetic events uses a series of strcat() and strcpy()
which can be error prone. Replace them with seq_buf() logic that does
all the necessary bound checking.
- Add a lockdep rcu_is_watching() to trace_##event##_enabled() call
The trace_##event##_enabled() is a static branch that is true if the
"event" is enabled. But this can hide bugs if this logic is in a
location where RCU is disabled and not "watching". It would only
trigger if lockdep is enabled and the event is enabled.
Add a "rcu_is_watching()" warning if lockdep is enabled in that
helper function to trigger regardless if the event is enabled or not.
- Remove the local variable in the trace_printk() macro
For name space integrity, remove the _______STR variable in the
trace_printk() macro for using the sizeof() macro directly.
- Use guard()s for the trace_recursion_record.c file
- Fix typo in a comment of eventfs_callback() kerneldoc
- Use trace_call__##event() in events within trace_##event##_enabled()
A couple of events are called within an if block guarded by
trace_##event##_enabled(). That is a static key that is only enabled
when the event is enabled. The trace_call_##event() calls the
tracepoint code directly without adding a redundant static key for
that check.
- Allow perf to read synthetic events
Currently, perf does not have the ability to enable a synthetic
event. If it does, it will either cause a kernel warning or error
with "No such device". Synthetic events are not much different than
kprobes and perf can handle fine with a few modifications.
- Replace printk(KERN_WARNING ...) with pr_warn()
- Replace krealloc() on an array with krealloc_array()
- Fix README file path name for synthetic events
- Change tracing_map tracing_map_array to use a flexible array
Instead of allocating a separate pointer to hold the pages field of
tracing_map_array, allocate the pages field as a flexible array when
allocating the structure.
- Fold trace_iterator_increment() into trace_find_next_entry_inc()
The function trace_iterator_increment() was only used by
trace_find_next_entry_inc(). It's not big enough to be a helper
function for one user. Fold it into its caller.
- Make field_var_str field a flexible array of hist_elt_data
Instead of allocating a separate pointer for the field_var_str array
of the hist_elt_data structure, allocate it as a flexible array when
allocating the structure.
- Disable KCOV for trace_irqsoff.c
Like trace_preemptirq.c, trace_irqsoff.c has code that will crash
when KCOV is enabled on ARM. The irqsoff tracing can be called on ARM
because the irqsoff tracing code can be run from early interrupt code
and produce coverage unrelated to syscall inputs.
- Fix warning in __unregister_ftrace_function() called by perf
Perf calls unregister_ftrace_function() without checking if its
ftrace_ops has already been unregistered. There's an error path where
on clean up it will unregister the ftrace_ops even if it wasn't
registered and causes a warning.
* tag 'trace-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
perf/ftrace: Fix WARNING in __unregister_ftrace_function
tracing: Disable KCOV instrumentation for trace_irqsoff.o
tracing: Turn hist_elt_data field_var_str into a flexible array
tracing: Move trace_iterator_increment() into trace_find_next_entry_inc()
tracing: Simplify pages allocation for tracing_map logic
tracing: Fix README path for synthetic_events
tracing: Use krealloc_array() for trace option array growth
tracing/branch: Use pr_warn() instead of printk(KERN_WARNING)
tracing: Allow perf to read synthetic events
HID: Use trace_call__##name() at guarded tracepoint call sites
cpufreq: amd-pstate: Use trace_call__##name() at guarded tracepoint call site
tracefs: Fix typo in a comment of eventfs_callback() kerneldoc
tracing: Switch trace_recursion_record.c code over to use guard()
tracing: Remove local variable for argument detection from trace_printk()
tracepoint: Add lockdep rcu_is_watching() check to trace_##name##_enabled()
tracing: Bound synthetic-field strings with seq_buf
seq_buf: Export seq_buf_putmem_hex() and add KUnit tests
tracing: Remove redundant IS_ERR() check in trace_pipe_open()
|
|
When __fbnic_set_rx_mode() is called from contexts other than
.ndo_set_rx_mode_async(), the uc and mc addr lists are accessed
without the addr lock that __hw_addr_sync_dev() and
__hw_addr_unsync_dev() require. Wrap these unprotected accesses with
netif_addr_lock_bh(). fbnic_clear_rx_mode() has similar issues.
Fixes: eb690ef8d1c2 ("eth: fbnic: Add L2 address programming")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617-linux-fbnic-hwaddr-v1-1-3f9f5dee7f99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Like commit a24162f18825("i40e: don't advertise IFF_SUPP_NOFCS"),
ngbe and txgbe also advertises IFF_SUPP_NOFCS and allowing users
to use the SO_NOFCS socket option. But the driver does not check
skb->no_fcs, so this option is silently ignored.
With this change, send() fails with -EPROTONOSUPPORT when AF_PACKET
socket is set SO_NOFCS option.
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Link: https://patch.msgid.link/20260617092854.133992-1-clementwei90@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
create_queues_with_size_backoff() creates XDP TX queues before setting
up the regular TX path. If the subsequent allocation or creation of
regular TX queues fails, the error handling paths omit the teardown of the
XDP TX queues, leading to a resource leak.
Fix this by explicitly destroying the XDP TX queue subset at the two
missing failure points.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have
an ENA device to test with, no runtime testing was able to be performed.
Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://patch.msgid.link/20260616142424.4005130-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DQO RX datapath programs a per-buffer-queue-descriptor
header_buf_addr at post time and reads the split header back at
completion time. Both the post and the read currently index the
header buffer by queue position rather than by the buffer's identity:
- post (gve_rx_post_buffers_dqo): header_buf_addr is computed from
bufq->tail
- read (gve_rx_dqo): the header is read from desc_idx (the completion
queue head index)
This relies on the buffer-queue index and the completion-queue index
being equal for the start of every packet, i.e. on the device consuming
posted buffers and returning completions in the exact same order. That
assumption does not hold once HW-GRO is enabled with multiple
flows: coalesced segments are accepted and completed in an order that
may differ from the order buffers were posted, and segments from
different flows may interleave.
That results in two problems:
1. Wrong header slot on read. Because the read offset is derived from
the completion index (desc_idx) while the device wrote the header to
the address programmed for the buffer's buf_id, the driver can copy
a header belonging to a different packet. This shows up as
throughput drop (about 30% drop and large numbers of TCP
retransmissions) with header-split and HW-GRO both enabled and many
streams.
2. Header buffer reused while still owned by the device. The driver
advances bufq->head by one per completion and re-posts buffers based
on that. Arrival of N RX completions only guarantees that at least N
RX buffer descriptors have been read by the device. It does not
guarantee that the device has relinquished the ownership of all the
buffers corresponding to those N descriptors. With out-of-order
completions (e.g. the completion for a packet copied into buffer N
arrives before the completion for a packet copied into buffer N-1),
the driver can re-post and overwrite a header buffer that the device
is still going to write into, corrupting the header of a packet
whose completion has not yet been processed.
Fix both issues by indexing the header buffer by buf_id on both the post
and read paths. Reading from buf_id's slot is therefore always correct
regardless of completion ordering (fixes problem 1).
Indexing by buf_id also ties each header slot to the lifetime of its
buffer state. A buffer state is only returned to the free/recycle lists
when its own completion (buf_id) is processed, so its header slot can
only be re-posted after the device is done with it. This makes header
slot reuse safe under out-of-order completions (fixes problem 2).
Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the
header buffers based on num_buf_states to match the buf_id indexing.
Cc: stable@vger.kernel.org
Fixes: 5e37d8254e7f ("gve: Add header split data path")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260617013208.3781453-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The
first frame goes into the skb linear area and every further frame is added as
a page fragment.
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
page, hdr_size, frame_size,
TBNET_RX_PAGE_SIZE - hdr_size);
A packet of frame_count frames therefore ends up with frame_count - 1
fragments. tbnet_check_frame() only bounds the peer supplied frame_count to
TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A
peer that sends a packet of 19 or more small frames pushes nr_frags past
MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and
corrupts memory after the shared info.
Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never
produce more fragments than frags[] can hold. This matches the recent skb
frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc
("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()").
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/178163152194.2486768.14724194232649760778@maoyixie.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nt->buf is exactly MAX_PRINT_CHUNK bytes, but scnprintf() reserves one
byte for its NUL terminator, so a non-fragmented payload of exactly
MAX_PRINT_CHUNK loses its last byte (emitted as a stray NUL in the
release path). Grow nt->buf to MAX_PRINT_CHUNK + 1 and bound the
scnprintf() calls with sizeof(nt->buf); the transmitted length stays
capped at MAX_PRINT_CHUNK.
Alternatively, nt->buf could be left at MAX_PRINT_CHUNK and the NUL byte
reserved by routing exactly-MAX_PRINT_CHUNK payloads to fragmentation
('len < MAX_PRINT_CHUNK'), at the cost of fragmenting those messages.
But it would look less sane, thus the current approach.
Fixes: c62c0a17f9b7 ("netconsole: Append kernel version to message")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260616-max_print_chunk-v1-1-8dc125d67083@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MACB found in the Raspberry Pi RP1 suffers from sporadic stalls on
the TX queue.
While the exact root cause is not yet fully understood, it is likely
related to a hardware issue where a TSTART write to the NCR register
is missed, preventing the transmission from being kicked off.
Implement a timeout callback to handle TX queue stalls, triggering the
existing restart mechanism to recover.
Link: https://lore.kernel.org/all/20260514215459.36109-1-lukasz@raczylo.com/
Fixes: dc110d1b23564 ("net: cadence: macb: Add support for Raspberry Pi RP1 ethernet controller")
Signed-off-by: Lukasz Raczylo <lukasz@raczylo.com>
Co-developed-by: Steffen Jaeckel <sjaeckel@suse.de>
Signed-off-by: Steffen Jaeckel <sjaeckel@suse.de>
Co-developed-by: Andrea della Porta <andrea.porta@suse.com>
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/468f480454a314303bac6a54780b153f689f2267.1781598350.git.andrea.porta@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
foe_check_time is declared as u16 pointer but was allocated with
only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16).
When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2,
it writes beyond the allocated buffer, causing heap buffer overflow and
potential kernel crash.
Fixes: 6d5b601d52a2 ("net: airoha: ppe: Dynamically allocate foe_check_time array in airoha_ppe struct")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178161119471.2163752.14373384830691569758@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block.
Fixes: 893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78811656934E713B77DA6CEDAFE62@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pch_gbe_alloc_tx_buffers() allocates an skb for each TX descriptor and
then passes the returned pointer to skb_reserve(). If netdev_alloc_skb()
fails, skb_reserve() dereferences NULL.
Make pch_gbe_alloc_tx_buffers() return an error when an skb allocation
fails. On failure, let pch_gbe_alloc_tx_buffers() clean the partially
allocated TX ring before returning the error. While bringing the device
up, release the RX buffer pool through a shared cleanup helper before
unwinding the IRQ setup.
Cc: stable+noautosel@kernel.org # untested fix to unlikely error path
Fixes: 77555ee72282 ("net: Add Gigabit Ethernet driver of Topcliff PCH")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260615125043.3537046-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit refactored the prechangeupper event handling but
failed to actually return an error in case
dpaa2_switch_prevent_bridging_with_8021q_upper() detected a 802.1q upper
on a port which tries to join a bridge. Fix this by returning err
instead of 0.
Fixes: 45035febc495 ("net: dpaa2-switch: refactor prechangeupper sanity checks")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260616105430.3725910-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised.
Fixes: 0c716703965f ("virtio-net: fix received length check in big packets")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20260616042837.2249468-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2:
- core: fix subdev sensor ownership
- subdev: Allow accessing routes with STREAMS client capability
- ctrls: Add validation for HEVC active reference counts and
background detection control
- common: Add YUV24 format info and has_alpha helper
- vb2: Change vb2_read() and vb2_write() return types to ssize_t
- i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)
- atmel-isc: remove deprecated driver
- cec: Add CEC Latency Indication Protocol (LIP) support
- imon: Add iMON VFD HID OEM v1.2 key mappings
- AVMatrix: new HWS capture driver
- isp4: new AMD capture driver
- qcom:
- iris: Add hierarchical coding, B-frame, and Long-Term Reference
support for encoder
- camss: Add SM6350 platform support
- venus: Add SM6115 platform support
- chips-media: wave5: Add support for Packed YUV422, CBP profile, and
background detection
- csi2rx: Add multistream support and 32 dma chans
- Several cleanups and fixes
* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
media: qcom: iris: vdec: update size and stride calculations for 10bit formats
media: qcom: iris: gen2: add support for 10bit decoding
media: qcom: iris: add QC10C & P010 buffer size calculations
media: qcom: iris: add helpers for 8bit and 10bit formats
media: qcom: iris: Fix FPS calculation and VPP FW overhead
media: qcom: camss: vfe-340: Support for PIX client
media: qcom: camss: vfe-340: Proper client handling
media: qcom: camss: csid-340: Enable PIX interface routing
media: qcom: camss: csid-340: Add port-to-interface mapping
media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
media: iris: Initialize HFI ops after firmware load in core init
media: iris: drop struct iris_fmt
media: iris: Add platform data for X1P42100
media: iris: Add hardware power on/off ops for X1P42100
media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
media: iris: add FPS calculation and VPP FW overhead in frequency formula
media: qcom: iris: Simplify COMV size calculation
...
|
|
strncpy() has been a persistent source of bugs due to its ambiguous
intended usage and frequently counter-intuitive semantics: it may not
NUL-terminate the destination, and it unconditionally zero-pads to the
full length, which isn't always needed. All former callers have been
migrated[1] to:
- strscpy() for NUL-terminated destinations
- strscpy_pad() for NUL-terminated destinations needing zero-padding
- strtomem_pad() for non-NUL-terminated fixed-width fields
- memcpy_and_pad() for bounded copies with explicit padding
- memcpy() for known-length copies
Remove the generic implementation, its declaration, the FORTIFY_SOURCE
wrapper, and associated tests.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull CXL updates from Dave Jiang:
"A collection of CXL fixes and changes, including an update to
MAINTAINERS to add Ming Li as a CXL subsystem reviewer.
There's also a series to introduce devm_cxl_probe_mem() core API in
order to pave the way for CXL type2 device drivers to setup and
retrieve CXL region resource during probe"
* tag 'cxl-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (26 commits)
cxl: Add dummy function for cxl_memdev_attach_region for !CONFIG_CXL_REGION
cxl/region: Introduce devm_cxl_probe_mem()
cxl/memdev: Introduce cxl_class_memdev_type
cxl/memdev: Pin parents for entire memdev lifetime
cxl/region: Resolve region deletion races
cxl/region: Block region delete during region creation
cxl/region: Fill first free targets[] slot during auto-discovery
cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach()
tools/testing/cxl: Resolve auto-region decoder targets like real HW
cxl: Align interleave decode/encode helpers with their callers
cxl/test: Add check after kzalloc() memory in alloc_mock_res()
cxl/test: Unregister cxl_acpi in cxl_test_init() error path
cxl/test: Zero out LSA backing memory to avoid leaking to user
cxl/test: Fix integer overflow in mock LSA bounds checks
cxl/test: Verify cmd->size_in before accessing payload
cxl/port: update reference to removed CONFIG_PROVE_CXL_LOCKING
cxl/region: Avoid variable shadowing in region attach paths
cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size
cxl/pci: Convert PCIBIOS errors to errno on DVSEC config accesses
cxl/pci: Fix the incorrect check of pci_read_config_word() return
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm/dax updates from Alison Schofield:
- Fix a race condition and a couple of static analysis issues in BTT
- Use sysfs_emit() in preparation for removal of cpumap_print_to_pagebuf()
- Escalate a dev_dbg to dev_err in a resource conflict message
- MAINTAINER file updates
* tag 'libnvdimm-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
MAINTAINERS: nvdimm: Include maintainer profile
MAINTAINERS: Update address for Ira Weiny
MAINTAINERS: Add maintainer info for libnvdimm and DAX
nvdimm: Use sysfs_emit() for cpumask show callback
dax/bus: Upgrade resource conflict message to dev_err() in alloc_dax_region()
nvdimm/btt: Free arenas on btt_init() error paths
nvdimm/btt: Free arena sub-allocations on discover_arenas() error path
nvdimm/btt: Handle preemption in BTT lane acquisition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add OF helpers for parsing the power-domains-child-ids property
- Extend the power domain DT binding with power-domains-child-ids
- Switch to use the dynamic root device
pmdomain providers:
- arm: Add support for domain hierarchies to SCMI power domains
- qcom: Add power domains for the Shikra and Nord SoCs
- sunxi: Fix GPU support on Radxa Cubie A7Z by keeping power domain on"
* tag 'pmdomain-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: fix unused variable warning with !PM_GENERIC_DOMAINS_OF
pmdomain: core: fix early domain registration
pmdomain: mediatek: mfg: move __packed after struct name to fix kernel-doc
pmdomain: qcom: rpmpd: Add Shikra RPM Power Domains
pmdomain: qcom: rpmhpd: Add power domains for Nord SoC
dt-bindings: power: qcom,rpmpd: document the Shikra RPM Power Domains
pmdomain: sunxi: support power domain flags for pck600
pmdomain: core: switch to dynamic root device
pmdomain: qcom: Unify user-visible "Qualcomm" name
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Nord SoC
dt-bindings: power: qcom,rpmhpd: Fix whitespace in RPMHPD defines
pmdomain: arm_scmi: add support for domain hierarchies
pmdomain: core: add support for power-domains-child-ids
dt-bindings: power: Add power-domains-child-ids property
|
