| Age | Commit message (Collapse) | Author |
|---|
|
Remove extraneous space before newline in messages.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
[bhelgaas: squash into one patch, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250731100017.2165781-1-colin.i.king@gmail.com
Link: https://patch.msgid.link/20250731101036.2167812-1-colin.i.king@gmail.com
|
|
pci_scan_child_bus_extend() open-codes device number iteration in the for
loop. Convert to use PCI_DEVFN() and add PCI_MAX_NR_DEVS (there seems to be
no pre-existing define for this purpose).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250610105820.7126-3-ilpo.jarvinen@linux.intel.com
|
|
Convert 256 to PCI_CFG_SPACE_SIZE and 4 to sizeof(u32) and avoid i / 4
construct by changing the iteration.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250610105820.7126-2-ilpo.jarvinen@linux.intel.com
|
|
Replace literals with PCI_HEADER_TYPE_* defines in pci_setup_device().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250610105820.7126-1-ilpo.jarvinen@linux.intel.com
|
|
Prevent intel_pstate from loading when OOB (Out Of Band) P-states mode is
enabled.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250808145122.4057208-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Marc has reported that commit 85975daeaa4d ("cpuidle: menu: Avoid
discarding useful information") caused the number of wakeup interrupts
to increase on an idle system [1], which was not expected to happen
after merely allowing shallower idle states to be selected by the
governor in some cases.
However, on the system in question, all of the idle states deeper than
WFI are rejected by the driver due to a firmware issue [2]. This causes
the governor to only consider the recent interval duriation data
corresponding to attempts to enter WFI that are successful and the
recent invervals table is filled with values lower than the scheduler
tick period. Consequently, the governor predicts an idle duration
below the scheduler tick period length and avoids stopping the tick
more often which leads to the observed symptom.
Address it by modifying the governor to update the recent intervals
table also when entering the previously selected idle state fails, so
it knows that the short idle intervals might have been the minority
had the selected idle states been actually entered every time.
Fixes: 85975daeaa4d ("cpuidle: menu: Avoid discarding useful information")
Link: https://lore.kernel.org/linux-pm/86o6sv6n94.wl-maz@kernel.org/ [1]
Link: https://lore.kernel.org/linux-pm/7ffcb716-9a1b-48c2-aaa4-469d0df7c792@arm.com/ [2]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2793874.mvXUDI8C0e@rafael.j.wysocki
|
|
There is no reason to limit intel_idle's loading of ACPI tables to
family 6. Upcoming Intel processors are not in family 6.
Below "Fixes" really means "applies cleanly until".
That syntax commit didn't change the previous logic,
but shows this patch applies back 5-years.
Fixes: 4a9f45a0533f ("intel_idle: Convert to new X86 CPU match macros")
Signed-off-by: Len Brown <len.brown@intel.com>
Link: https://patch.msgid.link/06101aa4fe784e5b0be1cb2c0bdd9afcf16bd9d4.1754681697.git.len.brown@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the channel selection or deselection times out, it indicates
a failure in the mux's I2C subsystem. Without sending a reset pulse,
a power-on-reset of the entire device would be required to restore
communication.
The datasheet specifies a minimum hold time of 4 ns for the reset
pulse, but due to the path's capacitance and themux having its own
clock, it is recommended to extend this to approximately 1 us.
Since reset controller is used, there is no need to take care of other
devices sharing the same reset line.
Signed-off-by: Wojciech Siudy <wojciech.siudy@nokia.com>
[wsa: removed superfluous prinout, unneeded braces and fixed indent]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Fallback to legacy reset-gpios is no more needed, because the framework
can use reset-gpios properity now as well.
Signed-off-by: Wojciech Siudy <wojciech.siudy@nokia.com>
[wsa: fixed whitespace issue]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The sharp-memory driver currently reads the vaddr field from the GME
buffer object directly. This only works because GEM code 'automagically'
sets vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
v2:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250627152327.8244-1-tzimmermann@suse.de
|
|
Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The repaper driver currently reads the vaddr field from the GME buffer
object directly. This only works because GEM code 'automagically' sets
vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
v2:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250627152422.8399-1-tzimmermann@suse.de
|
|
For non-leaf paging structures we end up selecting a random index
between [0, 3], depending on the first user if the page-table is shared,
since non-leaf structures only have two bits in the HW for encoding the
PAT index, and here we are just passing along the full user provided
index, which can be an index as large as ~31 on xe2+. The user provided
index is meant for the leaf node, which maps the actual BO pages where
we have more PAT bits, and not the non-leaf nodes which are only mapping
other paging structures, and so only needs a minimal PAT index range.
Also the chosen index might need to consider how the driver mapped the
paging structures on the host side, like wc vs wb, which is separate
from the user provided index.
With that move the PDE PAT index selection under driver control. For now
just use a coherent index on platforms with page-tables that are cached
on host side, and incoherent otherwise. Using a coherent index could
potentially be expensive, and would be overkill if we know the page-table
is always uncached on host side.
v2 (Stuart):
- Add some documentation and split into separate helper.
BSpec: 59510
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250808103455.462424-2-matthew.auld@intel.com
|
|
Rework nss_port5 to use the new multiple configuration implementation
and correctly fix the clocks for this port under some corner case.
In OpenWrt, this patch avoids intermittent dmesg errors of the form
nss_port5_rx_clk_src: rcg didn't update its configuration.
This is a mechanical, straightforward port of
commit e88f03230dc07aa3293b6aeb078bd27370bb2594
("clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf")
to gcc-ipq6018, with two conflicts resolved: different frequency of the
P_XO clock source, and only 5 Ethernet ports.
This was originally developed by JiaY-shi <shi05275@163.com>.
Link: https://lore.kernel.org/all/20231220221724.3822-4-ansuelsmth@gmail.com/
Signed-off-by: Marko Mäkelä <marko.makela@iki.fi>
Tested-by: Marko Mäkelä <marko.makela@iki.fi>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250802095546.295448-1-marko.makela@iki.fi
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This is an oddly common hiccup across clk/qcom.. Remove it in hopes to
reduce spread through copy-paste.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250802-topic-clk_qc_doublespace-v1-1-2cae59ba7d59@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the Hamoa-IoT-EVK board to the list to enable access to EFI variables.
Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250804-hamoa_initial-v4-2-19edbb28677b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In the qcom_spi_ecc_init_ctx_pipelined() function, the 'clrflashstatus'
and the 'clrreadstatus' members of the ECC context gets initialized with
constant values. Then these values are used by several functions to set
the corresponding members in the register cache.
Because the values are never modified, change the code to set the those
directly in the register cache by the qcom_spi_ecc_init_ctx_pipelined()
function, and remove the repetitive code from the other functions to
reduce code duplication.
Also, remove the respective members from the 'qpic_ecc' structure as
those became unused due to the change.
No functional changes intended.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250810-qpic-snand-qpic_ecc-cleanup-v1-2-33a6b2bcbc67@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 'dev' member of the 'qpic_ecc' structure is never used in the
code so remove that.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20250810-qpic-snand-qpic_ecc-cleanup-v1-1-33a6b2bcbc67@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix failures on big-endian architectures on tests cases
single_pixel_source_buffer, single_pixel_clip_rectangle,
well_known_colors and destination_pitch.
Fixes: 15bda1f8de5d ("drm/tests: Add calls to drm_fb_blit() on supported format conversion tests")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250630090054.353246-2-jose.exposito89@gmail.com
|
|
When compiling with sparse enabled, this warning is thrown:
warning: incorrect type in argument 2 (different base types)
expected restricted __le32 const [usertype] *buf
got unsigned int [usertype] *[assigned] buf
Add a cast to fix it.
Fixes: 453114319699 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250630090054.353246-1-jose.exposito89@gmail.com
|
|
The debug logging in gud_disconnect() adds zero detail and is
unnecessary, as it only prints the function name.
The same functionality can be achieved by using ftrace, and is
highlighted by checkpatch, stating the same.
This patch removes the debug log in the gud_disconnect() function.
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250721232210.12578-1-rubenru09@aol.com
|
|
fw_name in qcom_mdt_bins_are_split() seems unused now, it may have
used in the past for logging it but due to code refactor this parameter
is unused now.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250807074311.2381713-3-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
pas id is not used in qcom_mdt_load_no_init() and it should not
be used as it is non-PAS specific function and has no relation
to PAS specific mechanism.
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org> # drivers/net/wireless/ath/ath12k/ahb.c
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250807074311.2381713-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
commit f4e526ff7e38e ("soc: qcom: mdt_loader: Extract PAS
operations") move pas specific code from __qcom_mdt_load()
to a separate function qcom_mdt_pas_init() after which the
pas_init variable became unused in __qcom_mdt_load().
Remove pas_init argument from __qcom_mdt_load().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250807074311.2381713-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
GCC 16 enables -Werror=unused-but-set-variable= which results in build
error with the following message.
drivers/gpu/drm/radeon/r600_cs.c: In function ‘r600_texture_size’:
drivers/gpu/drm/radeon/r600_cs.c:1411:29: error: variable ‘level’ set but not used [-Werror=unused-but-set-variable=]
1411 | unsigned offset, i, level;
| ^~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:287: drivers/gpu/drm/radeon/r600_cs.o] Error 1
level although is set, but in never used in the function
r600_texture_size. Thus resulting in dead code and this error getting
triggered.
Fixes: 60b212f8ddcd ("drm/radeon: overhaul texture checking. (v3)")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Comments should not have a leading plus sign.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along following update:
-Fix close and open lid may cause eDP remaining blank
-Fix frequently disabling/enabling OTG may cause incorrect
configuration of OTG
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When qcom_scm_assign_mem() fails, the error value is currently being
overwritten after it is logged, resulting in the loss of the original
error code. Fix this by retaining and returning the original error value
as intended.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250807124451.2623019-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a new command for Panel Replay.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
The user closed the lid while the system was powering on and opened it
again before the “apply_seamless_boot_optimization” was set to false,
resulting in the eDP remaining blank.
Reset the “apply_seamless_boot_optimization” to false when dpms off.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Danny Wang <Danny.Wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Customer reported an issue that OS starts and stops device multiple times
during driver installation. Frequently disabling and enabling OTG may
prevent OTG from being safely disabled and cause incorrect configuration
upon the next enablement.
[How]
Add a wait until OTG_CURRENT_MASTER_EN_STATE is cleared as a short term
solution.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: TungYu Lu <tungyu.lu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
User queues are disabled before GEM objects are released
(protecting against user app crashes).
No races with PCI hot-unplug (because drm_dev_enter prevents cleanup
if iewdevice is being removed).
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
During a DPC error kernel waits for the link to be active before
notifying downstream devices. On certain platforms with Broadcom switch
in synthetiic mode, switch responds with values even though the link is
not fully ready. The config space restoration done by pcie port driver
for SWUS/DS of dGPU is thus not effective as the switch is still doing
internal enumeration.
As a workaround, save state of SWUS/DS device in driver. Add additional
check to see if link is active and restore the values during DPC error
callbacks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
CPU on Qualcomm ipq5424 is clocked by huayra PLL with RCG support.
Add support for the APSS PLL, RCG and clock enable for ipq5424.
The PLL, RCG register space are clubbed. Hence adding new APSS driver
for both PLL and RCG/CBC control. Also the L3 cache has a separate pll
and needs to be scaled along with the CPU and is modeled as an ICC clock.
[ Removed clock notifier, moved L3 pll to icc-clk, used existing
alpha pll structure ]
Co-developed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250811090954.2854440-3-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Updating drm-misc-fixes to the state of v6.17-rc1. Begins a new release
cycle.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Clamp writes to power limits powerX_crit/currX_crit, powerX_cap,
powerX_max, to the maximum supported by the pcode mailbox
when sysfs-provided values exceed this limit.
Although the pcode already performs clamping, values beyond the pcode
mailbox's supported range get truncated, leading to incorrect
critical power settings.
This patch ensures proper clamping to prevent such truncation.
v2:
- Address below review comments. (Riana)
- Split comments into multiple sentences.
- Use local variables for readability.
- Add a debug log.
- Use u64 instead of unsigned long.
v3:
- Change drm_dbg logs to drm_info. (Badal)
v4:
- Rephrase the drm_info log. (Rodrigo, Riana)
- Rename variable max_mbx_power_limit to max_supp_power_limit, as
limit is same for platforms with and without mailbox power limit
support.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power")
Fixes: fb1b70607f73 ("drm/xe/hwmon: Expose power attributes")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250808185310.3466529-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Christoph suggested that the explicit _GPL_ can be dropped from the
module namespace export macro, as it's intended for in-tree modules
only. It would be possible to restrict it technically, but it was
pointed out [2] that some cases of using an out-of-tree build of an
in-tree module with the same name are legitimate. But in that case those
also have to be GPL anyway so it's unnecessary to spell it out in the
macro name.
Link: https://lore.kernel.org/all/aFleJN_fE-RbSoFD@infradead.org/ [1]
Link: https://lore.kernel.org/all/CAK7LNATRkZHwJGpojCnvdiaoDnP%2BaeUXgdey5sb_8muzdWTMkA@mail.gmail.com/ [2]
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Nicolas Schier <n.schier@avm.de>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/20250808-export_modules-v4-1-426945bcc5e1@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit ab03a61c6614 ("ublk: have a per-io daemon instead of a per-queue
daemon") allowed each ublk I/O to have an independent daemon task.
However, nr_privileged_daemon is only computed based on whether the last
I/O fetched in each ublk queue has an unprivileged daemon task.
Fix this by checking whether every fetched I/O's daemon is privileged.
Change nr_privileged_daemon from a count of queues to a boolean
indicating whether any I/Os have an unprivileged daemon.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: ab03a61c6614 ("ublk: have a per-io daemon instead of a per-queue daemon")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250808155216.296170-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_ch_release currently quiesces the device's request_queue while
setting force_abort/fail_io. This avoids data races by preventing
concurrent reads from the I/O path, but is not strictly needed - at this
point, canceling is already set and guaranteed to be observed by any
concurrently executing I/Os, so they will be handled properly even if
the changes to force_abort/fail_io propagate to the I/O path later.
Remove the quiesce/unquiesce calls from ublk_ch_release. This makes the
writes to force_abort/fail_io concurrent with the reads in the I/O path,
so make the accesses atomic.
Before this change, the call to blk_mq_quiesce_queue was responsible for
most (90%) of the runtime of ublk_ch_release. With that call eliminated,
ublk_ch_release runs much faster. Here is a comparison of the total time
spent in calls to ublk_ch_release when a server handling 128 devices
exits, before and after this change:
before: 1.11s
after: 0.09s
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250808-ublk_quiesce2-v1-1-f87ade33fa3d@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the network stack keeps a reference for too long, DRBD keeps
references on a higher number of pages as a consequence.
Fix all that by no longer relying on page reference counts dropping to
an expected value. Instead, DRBD gives up its reference and lets the
system handle everything else. While at it, remove the open-coded
custom page pool mechanism and use the page_pool included in the
kernel.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Tested-by: Eric Hagberg <ehagberg@janestreet.com>
Link: https://lore.kernel.org/r/20250605103852.23029-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into gpio/for-next
Immutable branch for the pinctrl tree to pull from
Refactor the gpio-aggregator module as a prerequisite for merging the
pin controller driver for AAEON UP boards.
|
|
Add a data pointer to store private data in the forwarder.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-8-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add request() callback to check if the GPIO descriptor was well registered
in the gpiochip_fwd before using it. This is done to handle the case where
GPIO descriptor is added at runtime in the forwarder.
If at least one GPIO descriptor was not added before the forwarder
registration, we assume the forwarder can sleep as if a GPIO is added at
runtime it may sleep.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-7-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Export all symbols and create header file for the GPIO forwarder library.
It will be used in the next changes.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-6-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Remove useless parameters of gpiochip_fwd_setup_delay_line().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-5-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add a new function gpiochip_fwd_register(), which finalizes the
initialization of the forwarder and registers the corresponding gpiochip.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-4-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Create a dedicated function to add a GPIO desc in the forwarder. Instead of
saving a GPIO descs array pointer, now the GPIO descs are passed one by one
to the forwarder which registers them in its own array. So after the call
of gpiochip_fwd_create(), the passed array can be free.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-3-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Move the GPIO forwarder allocation and static initialization in a dedicated
function.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-2-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add support to register for GPIO<->pin mapping using a list of non
consecutive pins. The core already supports sparse pin range (pins member
of struct pinctrl_gpio_range), but it was not possible to register one. If
pins is not NULL the core uses it, otherwise it assumes that a consecutive
pin range was registered and it uses pin_base.
The function gpiochip_add_pin_range() which allocates and fills the struct
pinctrl_gpio_range was renamed to gpiochip_add_pin_range_with_pins() and
the pins parameter was added.
Two new functions were added, gpiochip_add_pin_range() and
gpiochip_add_sparse_pin_range() to register a consecutive or sparse pins
range. Both use gpiochip_add_pin_range_with_pins().
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-1-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
S2DOS05 has 1 buck and 4 LDO regulators, used for powering
panel/touchscreen.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://patch.msgid.link/20250805-starqltechn_integration_upstream-v8-1-09d8a321fafe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_kzalloc() has already been initialized to full 0 space, there is no
need to use memset() to initialize again.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250807123949.495193-1-liaoyuanhong@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
