summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-08-13usb: renesas_usbhs: Add support for RZ/T2H SoCLad Prabhakar
Add support for the Renesas RZ/T2H (r9a09g077) SoC by adding a compatible string to the usbhs_of_match table. The USBHS controller on the RZ/T2H is functionally similar to the one found on the RZ/G2L. While there are minor differences in register fields (for example, the AWAIT[8:13] bits in SYSCFG1 register), the current driver does not configure these, allowing reuse of the existing usbhs_rzg2l_plat_info for the RZ/T2H. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20250805114730.2491238-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-13usb: dwc3: qcom: Add shutdown handlerPrashanth K
Currently during system reboot, SMMU disables its translations while devices like USB may still be actively using DMA buffers. This can lead to NOC errors and system crashes due to invalid memory access. Address this by adding a shutdown callback to dwc3-qcom, which ensures proper teardown of UDC stack and prevents DWC3 controller from accessing memory after SMMU translation is disabled. Reuse the existing remove callback for this purpose. Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250725062158.2418961-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-13soc: ti: pruss: don't use %pK through printkThomas Weißschuh
In the past %pK was preferable to %p as it would not leak raw pointer values into the kernel log. Since commit ad67b74d2469 ("printk: hash addresses printed with %p") the regular %p has been improved to avoid this issue. Furthermore, restricted pointers ("%pK") were never meant to be used through printk(). They can still unintentionally leak raw pointers or acquire sleeping locks in atomic contexts. Switch to the regular pointer formatting which is safer and easier to reason about. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://lore.kernel.org/r/20250811-restricted-pointers-soc-v2-1-7af7ed993546@linutronix.de Signed-off-by: Nishanth Menon <nm@ti.com>
2025-08-13staging: vc04_services/vchiq-mmal: fix typos in commentsYuri Martins
Fix three spelling mistakes found in comments across the vchiq-mmal driver component: - recived -> received - servie -> service - enque -> enqueues Signed-off-by: Yuri Martins <yurimartins2004@hotmail.com> Link: https://lore.kernel.org/r/20250812015524.64413-1-yurimartins2004@hotmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-13staging: axis-fifo: use unique identifiers in device namesOvidiu Panait
Axis-fifo devices use physical addresses in their name, for example 'axis_fifo_0x43c00000'. This is generally frowned upon and it does not follow the usual naming scheme that uses unique identifiers. Therefore, use ida_alloc()/ida_free() to implement unique identifiers for axis-fifo device names (i.e. axis_fifo0, axis_fifo1, etc.). Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com> Link: https://lore.kernel.org/r/20250811085417.2641674-2-ovidiu.panait.oss@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-13staging: rtl8723bs: remove unnecessary forward declarationsMichael Straube
Remove unnecessary forward declarations of static functions to improve readability. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20250811070906.27232-3-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-13staging: rtl8723bs: use crypto_xor_cpyMichael Straube
Use the in-kernel function crypto_xor_cpy instead of the custom function bitwise_xor, as using in-kernel functions is preferred over custom implementations. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20250811070906.27232-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-13drm/i915/wcl: Add display device infoImre Deak
Add device info for wildcat lake. WCL has 3 pipes and 2 TC ports. Suggested-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://lore.kernel.org/r/20250808081931.4101388-2-chaitanya.kumar.borah@intel.com Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
2025-08-13drm/i915/display: Add power well mapping for WCLChaitanya Kumar Borah
WCL has 3 pipes and two TC ports, create power well mapping to reflect HW. Rest remains similar to Xe3 power well configuration. v2: Remove TC3/4 ports as they do not exist. Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://lore.kernel.org/r/20250808081931.4101388-1-chaitanya.kumar.borah@intel.com Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
2025-08-13regmap: Remove superfluous check for !config in __regmap_init()Geert Uytterhoeven
The first thing __regmap_init() do is check if config is non-NULL, so there is no need to check for this again later. Fixes: d77e745613680c54 ("regmap: Add bulk read/write callbacks into regmap_config") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/a154d9db0f290dda96b48bd817eb743773e846e1.1755090330.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-13media: i2c: ov2680: Use the v4l2 helper for obtaining the clockMehdi Djait
Use the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: vgxy61: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: vd56g3: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: vd55g1: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: s5k6a3: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: s5k5baf: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: s5c73m3: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov9650: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov9640: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov9282: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov8865: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov8858: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov8856: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov7740: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov6650: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov64a40: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov5695: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov5648: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov5647: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov5645: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov5640: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov2685: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov2659: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: ov02a10: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: mt9v111: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: mt9v032: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: mt9t112: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: mt9p031: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: mt9m114: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: mt9m111: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: mt9m001: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: imx415: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Reviewed-by: Michael Riesch <michael.riesch@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: imx412: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: imx335: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: imx334: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: imx296: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: imx290: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: imx283: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: imx219: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: i2c: imx214: Use the v4l2 helper for obtaining the clockMehdi Djait
devm_clk_get() fails on ACPI-based platforms, where firmware does not provide a direct reference to the clock producer. Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based platforms to retrieve a reference to the clock producer from firmware. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-17 07:17:35 +0000