| Age | Commit message (Collapse) | Author |
|---|
|
Currently, having a valid panel_id match is required to use the quirk
system. For certain devices, we know that all SKUs need a certain quirk.
Therefore, allow not specifying ident by only checking for a match
if panel_id is non-zero.
Tested-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-2-lkml@antheas.dev
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
Use topology_physical_package_id() to get the CPU package ID instead of
open coding.
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20250903030648.3285935-1-qiuxu.zhuo@intel.com
|
|
The touch resistance calculation in the tsc2007 driver is prone to
overflow if (z2 - z1) is large and also x is reasonably big. This
overflow results in the driver emitting input events when very little
touch pressure is applied. In these events the x and y coordinates can
be substantially off.
Avoid the overflow by using u64 when calculating resistance value.
Signed-off-by: Johannes Kirchmair <johannes.kirchmair@skidata.com>
Link: https://lore.kernel.org/r/20250129-fix_tsc_calculation_overflow-v2-1-9e51333496ad@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
During the suspend sequence the cached CPPC request is destroyed
with the expectation that it's restored during resume. This assumption
broke when the separate cache EPP variable was removed, and then it was
broken again by commit 608a76b65288 ("cpufreq/amd-pstate: Add support
for the "Requested CPU Min frequency" BIOS option") which explicitly
set it to zero during suspend.
Remove the invalidation and set the value during the suspend call to
update limits so that the cached variable can be used to restore on
resume.
Fixes: 608a76b65288 ("cpufreq/amd-pstate: Add support for the "Requested CPU Min frequency" BIOS option")
Fixes: b7a41156588a ("cpufreq/amd-pstate: Invalidate cppc_req_cached during suspend")
Reported-by: goldens <goldenspinach.rhbugzilla@gmail.com>
Closes: https://community.frame.work/t/increased-power-usage-after-resuming-from-suspend-on-ryzen-7040-kernel-6-15-regression/
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2391221
Tested-by: goldens <goldenspinach.rhbugzilla@gmail.com>
Tested-by: Willian Wang <kernel@willian.wang>
Reported-by: Vincent Mauirn <vincent.maurin.fr@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219981
Tested-by: Alex De Lorenzo <kernel@alexdelorenzo.dev>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250826052747.2240670-1-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
With the introduction of the of_msi_xlate() function, the OF layer
provides an API to map a device ID and retrieve the MSI controller
node the ID is mapped to with a single call.
of_msi_map_id() is currently used to map a deviceID to a specific
MSI controller node; of_msi_xlate() can be used for that purpose
too, there is no need to keep the two functions.
Convert of_msi_map_id() to of_msi_xlate() calls and update the
of_msi_xlate() documentation to describe how the struct device_node
pointer passed in should be set-up to either provide the MSI controller
node target or receive its pointer upon mapping completion.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250805133443.936955-1-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
In case tsc2007 is used as an ADC sensor there will be no interrupt
provided at all, so set up an interrupt only if one is present.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Since pen GPIO request is optional, there is no reason to throw dev_warn if
such GPIO is not defined.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The on-host hardware ECC engine remains registered both when
the spi_register_controller() function returns with an error
and also on device removal.
Change the qcom_spi_probe() function to unregister the engine
on the error path, and add the missing unregistering call to
qcom_spi_remove() to avoid possible use-after-free issues.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Message-ID: <20250903-qpic-snand-unregister-ecceng-v1-1-ef5387b0abdc@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In target mode, the host sending more data than can be consumed would be
a common problem for any message exceeding the FIFO or DMA buffer size.
Cancel the whole message as soon as this condition is hit as the message
will be corrupted.
Only do this for target mode in a DMA transfer, it's not likely these
flags will be set in host mode so it's not worth adding extra checks. In
IRQ and polling modes we use the same transfer functions for hosts and
targets so the error flags always get checked. This is slightly
inconsistent but it's not worth doing the check conditionally because it
may catch some host programming errors in the future.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20250902-james-nxp-spi-dma-v6-7-f7aa2c5e56e2@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the device is configured as a target, the host won't stop sending
data while we're draining the buffer which leads to FIFO underflows
and corruption.
Increase the DMA buffer size to the maximum words that edma can
transfer once to reduce the chance of this happening.
In host mode, the driver is able to split up a transfer into smaller
chunks so we don't need to increase the size. While in target mode, the
length of the transfer is determined by the remote host and can be
larger than whatever default buffer size we pick. Keeping the buffer
small in host mode avoids wasting memory, but allocating the largest
possible in target mode gives the lowest possible chance of dropping any
data from the host.
While we could allocate per-transfer using the exact size of the
transfer, 128K is quite a large allocation and there is a chance it
could fail due to memory fragmentation unless it's allocated once at
init time.
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20250902-james-nxp-spi-dma-v6-6-f7aa2c5e56e2@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dma_alloc_noncoherent() allocations are backed by a full page anyway, so
use it all.
VF610 devices used to use the full page before commit a957499bd437
("spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode"), but
others still used the FIFO size. After that commit, all devices used the
FIFO size. Now all devices use the full page.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20250902-james-nxp-spi-dma-v6-5-f7aa2c5e56e2@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using coherent memory here isn't functionally necessary, we're only
either sending data to the device or reading from it. This means
explicit synchronizations are only required around those points and the
change is fairly trivial.
This gives us around a 10% increase in throughput for large DMA
transfers and no loss for small transfers.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20250902-james-nxp-spi-dma-v6-4-f7aa2c5e56e2@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In a later commit we'll use dma_alloc_noncoherent() which isn't
stubbed out for builds without CONFIG_DMA_ENGINE and results in the
following build error:
spi-fsl-dspi.c:(.text+0x644): undefined reference to `dma_free_pages'
m68k-linux-ld: spi-fsl-dspi.c:(.text+0x67a): undefined reference to `dma_free_pages'
To continue to support devices that only need XSPI mode and so that
randconfig builds work, stub out DMA functionality in the DSPI driver.
Although older parts of the DMA API have their own stubs, it's
intentional that newer parts don't follow the same pattern. Therefore
individual drivers should not compile in calls unless CONFIG_DMA_ENGINE
is set.
Link: https://lore.kernel.org/oe-kbuild-all/202506160036.t9VDxF6p-lkp@intel.com/
Signed-off-by: James Clark <james.clark@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20250902-james-nxp-spi-dma-v6-3-f7aa2c5e56e2@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This will allow us to return a status from the interrupt handler in a
later commit and avoids copying it at the end of
dspi_transfer_one_message(). For consistency make polling and DMA modes
use the same mechanism.
No functional changes intended.
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20250902-james-nxp-spi-dma-v6-2-f7aa2c5e56e2@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor dspi_rxtx() and dspi_poll() to not return -EINPROGRESS because
this isn't actually a status that is ever returned to the core layer but
some internal state. Use true/false return value on dspi_rxtx() for this
instead.
This will help separate internal vs external status for the later change
to store the external status directly in cur_msg->status.
No functional changes intended.
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20250902-james-nxp-spi-dma-v6-1-f7aa2c5e56e2@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD and GPIO due for the v6.18 merge window
Convert GPIO drivers under drivers/mfd/ to using the modernized generic
GPIO chip API.
|
|
Trivial fix to spelling mistake in comment text.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Message-ID: <20250903020347.563003-1-zhao.xichao@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Sync up with MFD tree to bring in support for tps6594.
|
|
Export the clocks via the newly added clock-ids.
Signed-off-by: WeiHao Li <cn.liweihao@gmail.com>
Link: https://lore.kernel.org/r/20250831104855.45883-5-cn.liweihao@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just return the
value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250821093845.564496-1-zhao.xichao@vivo.com
|
|
Change the 'ret' variable from unsigned int to int to store negative error
codes or zero returned by other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but assigning negative error codes to unsigned type may trigger
a compiler warning when the -Wsign-conversion flag is enabled.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250829132020.82077-1-rongqianfeng@vivo.com
|
|
An ITS cache invalidation has been performed immediately after programming
the L2 DTE in gicv5_its_device_register(). No need to perform it again
right after a successful gicv5_its_device_register().
Remove it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250903023319.1820-1-yuzenghui@huawei.com
|
|
Convert the driver to using the new generic GPIO chip interfaces from
linux/gpio/generic.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250811-gpio-mmio-mfd-conv-v1-2-68c5c958cf80@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
removed the return value check from the call to gpiochip_add_data() (or
rather gpiochip_add() back then and later converted to devres) with no
explanation. This function however can still fail, so check the return
value and bail-out if it does.
Cc: stable@vger.kernel.org
Fixes: 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250811-gpio-mmio-mfd-conv-v1-1-68c5c958cf80@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Fail early from panthor_vm_bind_prepare_op_ctx instead of late from
ops->map_pages.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250828200116.3532255-1-olvaffe@gmail.com
|
|
PSR idle frames in VBT binary is a 4 bits wide bitfield. Checking if it's
below 0 or over 15 doesn't make sense. Remove these checks.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250901101033.4176277-1-jouni.hogander@intel.com
|
|
Switch from &i915->drm to display->drm.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250902144929.3026700-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a system level power-off handler if the "system-power-controller"
flag is set for this device in the device tree.
A power-off request is triggered by writing the TRIGGER_I2C_0 bit (which
is actually just a convention and really depends on the freely
programmable FSM).
Co-developed-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250826134631.1499936-4-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The PMIC has a multi-function pin PB/EN/VSENSE. If it is configured as
push-button (PB), add the corresponding device for it.
Co-developed-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250826134631.1499936-3-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
TPS6594 defines two interrupts for the power button one for push and
one for release.
This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250826134631.1499936-2-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Currently, only one pair of mixers is supported, so a non-zero counter
value is sufficient to identify the correct mixer within that pair.
However, future implementations may involve multiple mixer pairs. With
the current implementation, all mixers within the second pair would be
incorrectly selected as right mixer. To correctly select the mixer
within a pair, test the least significant bit of the counter. If the
least significant bit is not set, select the mixer as left one;
otherwise, select the mixer as right one for all pairs.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/669226/
Link: https://lore.kernel.org/r/20250819-v6-16-rc2-quad-pipe-upstream-v15-3-2c7a85089db8@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
It is more likely that resource allocation may fail in complex usage
case, such as quad-pipe case, than existing usage cases.
A resource type ID is printed on failure in the current implementation,
but the raw ID number is not explicit enough to help easily understand
which resource caused the failure, so add a table to match the type ID
to an human readable resource name and use it in the error print.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/669225/
Link: https://lore.kernel.org/r/20250819-v6-16-rc2-quad-pipe-upstream-v15-2-2c7a85089db8@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Current code will validate current plane and previous plane to
confirm they can share a SSPP with multi-rect mode. The SSPP
is already allocated for previous plane, while current plane
is not associated with any SSPP yet. Null pointer is referenced
when validating the SSPP of current plane. Skip SSPP validation
for current plane.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000888ac3000
[0000000000000020] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 4 UID: 0 PID: 1891 Comm: modetest Tainted: G S 6.15.0-rc2-g3ee3f6e1202e #335 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: SM8650 EV1 rev1 4slam 2et (DT)
pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : dpu_plane_is_multirect_capable+0x68/0x90
lr : dpu_assign_plane_resources+0x288/0x410
sp : ffff800093dcb770
x29: ffff800093dcb770 x28: 0000000000002000 x27: ffff000817c6c000
x26: ffff000806b46368 x25: ffff0008013f6080 x24: ffff00080cbf4800
x23: ffff000810842680 x22: ffff0008013f1080 x21: ffff00080cc86080
x20: ffff000806b463b0 x19: ffff00080cbf5a00 x18: 00000000ffffffff
x17: 707a5f657a696c61 x16: 0000000000000003 x15: 0000000000002200
x14: 00000000ffffffff x13: 00aaaaaa00aaaaaa x12: 0000000000000000
x11: ffff000817c6e2b8 x10: 0000000000000000 x9 : ffff80008106a950
x8 : ffff00080cbf48f4 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000438 x3 : 0000000000000438
x2 : ffff800082e245e0 x1 : 0000000000000008 x0 : 0000000000000000
Call trace:
dpu_plane_is_multirect_capable+0x68/0x90 (P)
dpu_crtc_atomic_check+0x5bc/0x650
drm_atomic_helper_check_planes+0x13c/0x220
drm_atomic_helper_check+0x58/0xb8
msm_atomic_check+0xd8/0xf0
drm_atomic_check_only+0x4a8/0x968
drm_atomic_commit+0x50/0xd8
drm_atomic_helper_update_plane+0x140/0x188
__setplane_atomic+0xfc/0x148
drm_mode_setplane+0x164/0x378
drm_ioctl_kernel+0xc0/0x140
drm_ioctl+0x20c/0x500
__arm64_sys_ioctl+0xbc/0xf8
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x48/0xf8
do_el0_svc+0x28/0x40
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x144/0x168
el0t_64_sync+0x198/0x1a0
Code: b9402021 370fffc1 f9401441 3707ff81 (f94010a1)
---[ end trace 0000000000000000 ]---
Fixes: 3ed12a3664b36 ("drm/msm/dpu: allow sharing SSPP between planes")
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/669224/
Link: https://lore.kernel.org/r/20250819-v6-16-rc2-quad-pipe-upstream-v15-1-2c7a85089db8@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Drop the unused maxwidth field from the dpu_lm_sub_blks struct
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/653759/
Link: https://lore.kernel.org/r/20250514-max-mixer-width-v1-1-c8ba0d9bb858@oss.qualcomm.com
[DB: also handled SM8750 block]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
After a recent series to use FIELD_PREP and FIELD_MODIFY in
tidss_dispc.c, there are many errors when bitfield.h is not implicitly
included, such as when building allmodconfig for ARCH=hexagon:
drivers/gpu/drm/tidss/tidss_dispc.c:1116:2: error: call to undeclared function 'FIELD_MODIFY'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1116 | VP_REG_FLD_MOD(dispc, hw_videoport, DISPC_VP_CONTROL, v,
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:631:3: note: expanded from macro 'VP_REG_FLD_MOD'
631 | FIELD_MODIFY((mask), &_reg, (val)); \
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:1140:2: error: call to undeclared function 'FIELD_MODIFY'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1140 | FIELD_MODIFY(DISPC_VP_DSS_OLDI_CFG_MAP_MASK, &oldi_cfg,
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:1203:10: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1203 | FIELD_PREP(DISPC_VP_TIMING_H_SYNC_PULSE_MASK, hsw - 1) |
| ^
...
Explicitly include bitfield.h to resolve the errors.
Fixes: 9accc8b10de8 ("drm/tidss: dispc: Get rid of FLD_VAL")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-tidss-fix-missing-bitfield-h-v1-1-aaad4a285f98@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Use poll_timeout_us() instead of open-coding the timeout loop.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250829113311.1930618-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Cypress(Infineon) is not the vendor for this 43752 SDIO WLAN chip, and so
has not officially released any firmware binary for it. It is incorrect to
maintain this WLAN chip with firmware vendor ID as "CYW". So relabel the
chip's firmware Vendor ID as "WCC" as suggested by the maintainer.
Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
Fixes: f74f1ec22dc2 ("wifi: brcmfmac: add support for Cypress firmware api")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250724101136.6691-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The world regulatory domain is a restrictive subset of channel
configurations which allows legal operation of the adapter all over the
world. Changing to this domain should not be prevented.
Fixes: dd4a9ac05c8e1 ("mwifiex: send regulatory domain info to firmware only if alpha2 changed") changed
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con>
Link: https://patch.msgid.link/20250804-fix-mwifiex-regulatory-domain-v1-1-e4715c770c4d@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Marvell/NXP Wi-Fi adapters allow fine-grained adjustment of the transmit
power levels and various other internal parameters. This is done by
sending command streams to the adapter. One storage format of these
command streams are the rgpower tables, which consist of multiple
command blocks in the following format:
command_block_1 = {
XX XX LL LL XX XX ..
}
command_block_n = {
XX XX LL LL XX XX XX ..
}
XX = raw byte as hex chars
LL = total length of the "raw" command block
These command blocks are parsed into their binary representation and
then send to the adapter. The parsing logic was adapted from NXP's
mwifiex driver[1].
The rgpower tables matching the currently set regulatory domain are
automatically requested and applied. If not found the existing device
tree provided power tables are tried as well.
[1]:
https://github.com/nxp-imx/mwifiex/blob/7a8beaa1605cb0870dc7ba3312c76df91cb0d6cf/mlan/mlan_cmdevt.c#L812
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Link: https://patch.msgid.link/20250804-feature-mwifiex-rgpower-table-loading-v1-1-358e70a4d45e@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
-Wflex-array-member-not-at-end warnings
Remove unused structures and avoid the following
-Wflex-array-member-not-at-end warnings:
drivers/net/wireless/intel/iwlegacy/iwl-spectrum.h:68:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlegacy/iwl-spectrum.h:60:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/aJl7TxeWgLdEKWhg@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The NVRAM selection logic in brcmf_fw_request_nvram_done() used
patterns like:
if ((data = bcm47xx_nvram_get_contents(&data_len)))
free_bcm47xx_nvram = true;
else if ((data = brcmf_fw_nvram_from_efi(&data_len)))
kfree_nvram = true;
This style violates kernel coding style guidelines and triggers
checkpatch.pl errors. It also slightly reduces readability.
Refactor these cases by separating the assignment and the check,
ensuring behavior remains identical while complying with coding
standards.
Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250812123636.2142292-1-darshanrathod475@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.17-rc5
Fix a long-standing issue with ath11k dropping group data packets
during GTK rekey, and fix an omission in the ath12k multi-link EMLSR
support introduced in v6.16.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix the following copy overflow warning identified by Smatch checker.
drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame()
error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537)
This patch introduces size check before accessing the memory buffer.
The checks are base on the WID type of received data from the firmware.
For WID string configuration, the size limit is determined by individual
element size in 'struct wilc_cfg_str_vals' that is maintained in 'len' field
of 'struct wilc_cfg_str'.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/aLFbr9Yu9j_TQTey@stanley.mountain
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://patch.msgid.link/20250829225829.5423-1-ajay.kathat@microchip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-6-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-5-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-4-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-3-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-2-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-1-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If the ssid_eid[1] length is more that 32 it leads to memory corruption.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/2a40f5ec7617144aef412034c12919a4927d90ad.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
