| Age | Commit message (Collapse) | Author |
|---|
|
Right now the interrupt handler first reads all updated status registers
and only then clears the interrupts. It's possible that a duplicate
interrupt for a changed register or plug state comes in after the
interrupts have been processed but before they have been cleared:
* plug is inserted, TPS_REG_INT_PLUG_EVENT is set
* TPS_REG_INT_EVENT1 is read
* tps6598x_handle_plug_event() has run and registered the plug
* plug is removed again, TPS_REG_INT_PLUG_EVENT is set (again)
* TPS_REG_INT_CLEAR1 is written, TPS_REG_INT_PLUG_EVENT is cleared
We then have no plug connected and no pending interrupt but the tipd
core still thinks there is a plug. It's possible to trigger this with
e.g. a slightly broken Type-C to USB A converter.
Fix this by first clearing the interrupts and only then reading the
updated registers.
Fixes: 45188f27b3d0 ("usb: typec: tipd: Add support for Apple CD321X")
Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc: stable@kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-1-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend the Tegra124 DFLL driver to include configuration settings
required for Tegra114 compatibility.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
[treding@nvidia.com: Use TEGRA210 instead of T210]
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The `cros_ec_keyb` driver can be probed before the cros_ec_device has
completed the registration. This creates a race condition where
`cros_ec_keyb` might access uninitialized data.
Fix this by calling `cros_ec_device_registered()` to check the parent's
status. If the device is not yet ready, return -EPROBE_DEFER to ensure
the probe is retried later.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250828083601.856083-6-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Introduce a `registered` flag to the `struct cros_ec_device` to allow
callers to determine if the device has been fully registered and is
ready for use.
This is a preparatory step to prevent race conditions where other drivers
might try to access the device before it is fully registered or after
it has been unregistered.
Link: https://lore.kernel.org/r/20250828083601.856083-5-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Move the initialization of the `struct cros_ec_device` from
cros_ec_register() into cros_ec_device_alloc().
This decouples device initialization from registration. By doing so,
the per-device lock is now available immediately after allocation,
allowing it to be used safely even before the device is fully
registered.
Link: https://lore.kernel.org/r/20250828083601.856083-4-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Move the common initialization from protocol device drivers into central
cros_ec_device_alloc().
This removes duplicated code from each driver's probe function.
The buffer sizes are now calculated once, using the maximum possible
overhead required by any of the transport protocols, ensuring the
allocated buffers are sufficient for all cases.
Link: https://lore.kernel.org/r/20250828083601.856083-3-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Introduce a helper function, cros_ec_device_alloc(), to centralize the
allocation of the struct cros_ec_device. Convert all protocol device
drivers to use this new function.
This is a preparatory step for separating common initialization logic
out of device drivers' probe() and cros_ec_register().
Link: https://lore.kernel.org/r/20250828083601.856083-2-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
When KHO (Kexec HandOver) is enabled, it sets up scratch memory regions
early during device tree scanning. After kexec, the new kernel
exclusively uses this region for memory allocations during boot up to the
initialization of the page allocator
However, when booting with EFI, EFI's reserve_regions() uses
memblock_remove(0, PHYS_ADDR_MAX) to clear all memory regions before
rebuilding them from EFI data. This destroys KHO scratch regions and
their flags, thus causing a kernel panic, as there are no scratch memory
regions.
Instead of wholesale removal, iterate through memory regions and only
remove non-KHO ones. This preserves KHO scratch regions, which are good
known memory, while still allowing EFI to rebuild its memory map.
Link: https://lkml.kernel.org/r/b34da9fd50c89644cd4204136cfa6f5533445c56.1755721529.git.epetron@amazon.de
Signed-off-by: Evangelos Petrongonas <epetron@amazon.de>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update the fbcon_skip_panic() function to use the panic_in_progress()
helper.
The previous direct access to panic_cpu is less readable and is being
replaced by a dedicated function that more clearly expresses the intent.
This change is part of a series to refactor the kernel's panic handling
logic for better clarity and robustness.
Link: https://lkml.kernel.org/r/20250825022947.1596226-3-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang <wangjinchao600@gmail.com>
Acked-by Qianqiang Liu <qianqiang.liu@163.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kees Cook <kees@kernel.org>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Luo Gengkun <luogengkun@huaweicloud.com>
Cc: Max Kellermann <max.kellermann@ionos.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: oushixiong <oushixiong@kylinos.cn>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Yunhui Cui <cuiyunhui@bytedance.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If register_node() returns an error, it is not handled correctly.
The function will proceed further and try to register CPUs under the
node, which is not correct.
So, in this patch, if register_node() returns an error, we return
immediately from the function.
Link: https://lkml.kernel.org/r/20250822084845.19219-1-donettom@linux.ibm.com
Fixes: 76b67ed9dce6 ("[PATCH] node hotplug: register cpu: remove node struct")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
... and hide it behind a kconfig option. There is really no need for any
!xen code to perform this check.
The naming is a bit off: we want to find the "normal" page when a PTE was
marked "special". So it's really not "finding a special" page.
Improve the documentation, and add a comment in the code where XEN ends up
performing the pte_mkspecial() through a hypercall. More details can be
found in commit 923b2919e2c3 ("xen/gntdev: mark userspace PTEs as special
on x86 PV guests").
Link: https://lkml.kernel.org/r/20250811112631.759341-12-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
At this point MIGRATEPAGE_SUCCESS is misnamed for all folio users,
and now that we remove MIGRATEPAGE_UNMAP, it's really the only "success"
return value that the code uses and expects.
Let's just get rid of MIGRATEPAGE_SUCCESS completely and just use "0"
for success.
Link: https://lkml.kernel.org/r/20250811143949.1117439-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com> [mm]
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> [jfs]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Byungchul Park <byungchul@sk.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sysfs handlers should be called under ->init_lock and are not supposed to
unlock it until return, otherwise e.g. a concurrent reset() can occur.
There is one handler that breaks that rule: recomp_algorithm_show().
Move ->init_lock handling outside of __comp_algorithm_show() (also drop it
and call zcomp_available_show() directly) so that the entire
recomp_algorithm_show() loop is protected by the lock, as opposed to
protecting individual iterations.
The patch does not need to go to -stable, as it does not fix any
runtime errors (at least I can't think of any). It makes
recomp_algorithm_show() "atomic" w.r.t. zram reset() (just like the
rest of zram sysfs show() handlers), that's a pretty minor change.
Link: https://lkml.kernel.org/r/20250805101946.1774112-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Seyediman Seyedarab <imandevel@gmail.com>
Suggested-by: Seyediman Seyedarab <imandevel@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Attempt to map aligned to huge page size for private mapping which could
achieve performance gains, the mprot_tw4m in libMicro average execution
time on arm64:
- Test case: mprot_tw4m
- Before the patch: 22 us
- After the patch: 17 us
If THP config is not set, we fall back to system page size mappings.
Link: https://lkml.kernel.org/r/20250731122305.2669090-1-zhangqilong3@huawei.com
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for sy7636a which got confused about which device to use to
manage the lifecycle of the power good GPIO because it's looked up
from the parent device due to the way DT bindings work"
* tag 'regulator-fix-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: sy7636a: fix lifecycle of power good gpio
|
|
Introduce rcar_canfd_compute_data_bit_rate_cfg() for simplifying data bit
rate configuration by replacing function-like macros.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-5-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Introduce rcar_canfd_compute_nominal_bit_rate_cfg() for simplifying
nominal bit rate configuration by replacing function-like macros.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-4-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Update RCANFD_CFG_* macros to give a meaning to the magic number using
GENMASK macro and extract the values using FIELD_PREP macro.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The calculation formula for nominal bit rate of classical CAN is the same as
that of nominal bit rate of CANFD on the RZ/G3E and R-Car Gen4 SoCs
compared to other SoCs. Update nominal bit rate constants.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250908120940.147196-2-biju.das.jz@bp.renesas.com
[mkl: slightly improve wording of commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
With the upcoming deletion of @peak-system.com accounts and following
the acquisition of PEAK-System and its brand by HMS-Networks, this fix
aims to migrate all address references to @hms-networks.com, as well
as to map my personal committer addresses to author addresses, while
taking the opportunity to correct the accent on the first ‘e’ of my
first name.
Signed-off-by: Stéphane Grosjean <stephane.grosjean@hms-networks.com>
Link: https://patch.msgid.link/20250912081820.86314-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Includes are out of order in
drivers/net/can/dev/dev.c
Sort them by alphabetical order.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250830152107.694201-2-mailhol@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The tx_coalesce_usecs_irq are more suitable for using the
us_to_ktime(). This can make the code more concise and
enhance readability.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250825090904.248927-1-zhao.xichao@vivo.com
[mkl: remove not needed line break]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero
unique ID.
```
Each Unit and Terminal within the video function is assigned a unique
identification number, the Unit ID (UID) or Terminal ID (TID), contained in
the bUnitID or bTerminalID field of the descriptor. The value 0x00 is
reserved for undefined ID,
```
If we add a new entity with id 0 or a duplicated ID, it will be marked
as UVC_INVALID_ENTITY_ID.
In a previous attempt commit 3dd075fe8ebb ("media: uvcvideo: Require
entities to have a non-zero unique ID"), we ignored all the invalid units,
this broke a lot of non-compatible cameras. Hopefully we are more lucky
this time.
This also prevents some syzkaller reproducers from triggering warnings due
to a chain of entities referring to themselves. In one particular case, an
Output Unit is connected to an Input Unit, both with the same ID of 1. But
when looking up for the source ID of the Output Unit, that same entity is
found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID
was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[ 20.830206] usb 1-1: Using ep0 maxpacket: 8
[ 20.833501] usb 1-1: config 0 descriptor??
[ 21.038518] usb 1-1: string descriptor 0 read error: -71
[ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201)
[ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized!
[ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized!
[ 21.042218] ------------[ cut here ]------------
[ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0
[ 21.043195] Modules linked in:
[ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444
[ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 21.044639] Workqueue: usb_hub_wq hub_event
[ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0
[ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00
[ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246
[ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1
[ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290
[ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000
[ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003
[ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000
[ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0
[ 21.051136] PKRU: 55555554
[ 21.051331] Call Trace:
[ 21.051480] <TASK>
[ 21.051611] ? __warn+0xc4/0x210
[ 21.051861] ? media_create_pad_link+0x2c4/0x2e0
[ 21.052252] ? report_bug+0x11b/0x1a0
[ 21.052540] ? trace_hardirqs_on+0x31/0x40
[ 21.052901] ? handle_bug+0x3d/0x70
[ 21.053197] ? exc_invalid_op+0x1a/0x50
[ 21.053511] ? asm_exc_invalid_op+0x1a/0x20
[ 21.053924] ? media_create_pad_link+0x91/0x2e0
[ 21.054364] ? media_create_pad_link+0x2c4/0x2e0
[ 21.054834] ? media_create_pad_link+0x91/0x2e0
[ 21.055131] ? _raw_spin_unlock+0x1e/0x40
[ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210
[ 21.055837] uvc_mc_register_entities+0x358/0x400
[ 21.056144] uvc_register_chains+0x1fd/0x290
[ 21.056413] uvc_probe+0x380e/0x3dc0
[ 21.056676] ? __lock_acquire+0x5aa/0x26e0
[ 21.056946] ? find_held_lock+0x33/0xa0
[ 21.057196] ? kernfs_activate+0x70/0x80
[ 21.057533] ? usb_match_dynamic_id+0x1b/0x70
[ 21.057811] ? find_held_lock+0x33/0xa0
[ 21.058047] ? usb_match_dynamic_id+0x55/0x70
[ 21.058330] ? lock_release+0x124/0x260
[ 21.058657] ? usb_match_one_id_intf+0xa2/0x100
[ 21.058997] usb_probe_interface+0x1ba/0x330
[ 21.059399] really_probe+0x1ba/0x4c0
[ 21.059662] __driver_probe_device+0xb2/0x180
[ 21.059944] driver_probe_device+0x5a/0x100
[ 21.060170] __device_attach_driver+0xe9/0x160
[ 21.060427] ? __pfx___device_attach_driver+0x10/0x10
[ 21.060872] bus_for_each_drv+0xa9/0x100
[ 21.061312] __device_attach+0xed/0x190
[ 21.061812] device_initial_probe+0xe/0x20
[ 21.062229] bus_probe_device+0x4d/0xd0
[ 21.062590] device_add+0x308/0x590
[ 21.062912] usb_set_configuration+0x7b6/0xaf0
[ 21.063403] usb_generic_driver_probe+0x36/0x80
[ 21.063714] usb_probe_device+0x7b/0x130
[ 21.063936] really_probe+0x1ba/0x4c0
[ 21.064111] __driver_probe_device+0xb2/0x180
[ 21.064577] driver_probe_device+0x5a/0x100
[ 21.065019] __device_attach_driver+0xe9/0x160
[ 21.065403] ? __pfx___device_attach_driver+0x10/0x10
[ 21.065820] bus_for_each_drv+0xa9/0x100
[ 21.066094] __device_attach+0xed/0x190
[ 21.066535] device_initial_probe+0xe/0x20
[ 21.066992] bus_probe_device+0x4d/0xd0
[ 21.067250] device_add+0x308/0x590
[ 21.067501] usb_new_device+0x347/0x610
[ 21.067817] hub_event+0x156b/0x1e30
[ 21.068060] ? process_scheduled_works+0x48b/0xaf0
[ 21.068337] process_scheduled_works+0x5a3/0xaf0
[ 21.068668] worker_thread+0x3cf/0x560
[ 21.068932] ? kthread+0x109/0x1b0
[ 21.069133] kthread+0x197/0x1b0
[ 21.069343] ? __pfx_worker_thread+0x10/0x10
[ 21.069598] ? __pfx_kthread+0x10/0x10
[ 21.069908] ret_from_fork+0x32/0x40
[ 21.070169] ? __pfx_kthread+0x10/0x10
[ 21.070424] ret_from_fork_asm+0x1a/0x30
[ 21.070737] </TASK>
Reported-by: syzbot+0584f746fde3d52b4675@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0584f746fde3d52b4675
Reported-by: syzbot+dd320d114deb3f5bb79b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dd320d114deb3f5bb79b
Reported-by: Youngjun Lee <yjjuny.lee@samsung.com>
Fixes: a3fbc2e6bb05 ("media: mc-entity.c: use WARN_ON, validate link pads")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Co-developed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The ChromeOS XU provides a control to change the IQ profile for a camera.
It can be switched from VIVID (a.k.a. standard) to NONE (a.k.a. natural).
Wire it up to the standard v4l2 control.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The function uvc_ctrl_init_ctrl() is called for every control for every
entity, but it exits early if the entity is a extension unit. The comment
claims that this is done to avoid querying XU controls during probe.
We only query a control if its entity GUIDs and index matches the
uvc_ctrls list. There are only controls for the following GUIDs:
UVC_GUID_UVC_PROCESSING, UVC_GUID_UVC_CAMERA and
UVC_GUID_EXT_GPIO_CONTROLLER.
In other words, XU controls will not be queried even without this
condition.
In future patches we want to add ChromeOS XU controls that need to the
initialized. We will make sure that all cameras with ChromeOS XU can
be queried at probe time.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This message is much longer than others and doesn't fit even in a 160
column window when printed, despite providing little real information.
Also replace 'transmission' with 'transfer' because that's the actual
name and 'max packet' with 'limit' because it isn't same thing with
isochronus endpoints. Remove cryptic abbreviations like 'ep'.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
dev->udev is already referenced by the variable udev. Let's use it.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The UVC driver is a usb_interface driver. Use the correct device for
printks to avoid confusions with other interface drivers associated to
the same usb device.
With this change:
uvcvideo 3-6:1.0: Found UVC 1.10 device USB2.0 WebCam (1234:abcd)
Without this change:
usb 3-6: Found UVC 1.10 device USB2.0 WebCam (1234:abcd)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
It is more natural that the "struct video_device" belongs to
uvc_video_queue instead of uvc_streaming.
This is an aesthetic change. No functional change expected.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Since commit c93d73c9c2cf ("media: uvcvideo: Use vb2 ioctl and fop
helpers"), the IOCTLs are serialized. Due to this there is no more need
to protect ctrl, cur_format or cur_frame from concurrent access.
Drop stream->mutex after thanking it for years of good service.
Use this opportunity to do fix some CodeStyle.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Move the MSXU_CONTROL_METADATA control definitino to the
include/linux/usb/uvc.h header, alongside the corresponding XU GUID. Add
a UVC_ prefix to avoid namespace clashes.
While at it, add the definition for the other controls for that
extension unit, as defined in
https://learn.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5#222-extension-unit-controls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The uvc_meta_v4l2_try_format() function is missing curly braces on an
outer for loop statement to comply with the driver coding style. Add
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The .vidioc_g_fmt_meta_cap() and .vidioc_enum_fmt_meta_cap() ioctl
handlers for meta capture devices memset the ioctl argument structure to
zero. This is unnecessary as the memory is already zeroed by the V4L2
ioctl core. Drop the memset(), which, in uvc_meta_v4l2_enum_formats(),
also allows further simplification as structure fields don't need to be
saved and restored.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The comments can be more precise. Let's fix them.
Fixes: 6cb786f040ad ("media: uvcvideo: Auto-set UVC_QUIRK_MSXU_META")
Cc: stable+noautosel@kernel.org # Coment change only, no need to backport
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This avoids a variable loop shadowing occurring between the local loop
iterating through the uvc_entity's controls and the global one going
through the pending async controls of the file handle.
Fixes: 10acb9101355 ("media: uvcvideo: Increase/decrease the PM counter per IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The function uvc_input_init() uses an assignment of the return value
of input_register_device() within the condition of an if statement.
This coding style is discouraged by the Linux kernel coding style guide
as it can be confused with a comparison and hide potential bugs.
The checkpatch.pl script flags this as an error:
"ERROR: do not use assignment in if condition"
Separate the assignment into its own statement before the conditional
check to improve code readability and adhere to the kernel's
coding standards.
Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Replace `gpiod_set_value()` with `gpiod_set_value_cansleep()`, which is
required when the GPIO controller is connected via a slow bus such as
I2C. This is also safe to use in sleepable contexts like the driver
probe function.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Remove `dev_info()` call as it was considered noisy and is not
necessary for normal driver operation.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Interacting with the GSP currently requires using definitions from C
header files. Rust definitions for the types needed for Nova core will
be generated using the Rust bindgen tool. This patch adds the base
module to allow inclusion of the generated bindings. The generated
bindings themselves are added by subsequent patches when they are first
used.
Currently we only intend to support a single firmware version, 570.144,
with these bindings. Longer term we intend to move to a more stable GSP
interface that isn't tied to specific firmware versions.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: adapt the bindings module comment a bit]
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-10-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
570.144 is the latest available into linux-firmware as of this commit,
and the one we will use to start development of nova-core. It should
eventually be dropped for a newer version before the driver becomes able
to do anything useful. The newer firmware is expected to iron out some
of the inelegances of 570.144, notably related to packaging.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-9-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
The GSP bootloader is a small RISC-V firmware that is loaded by Booter
onto the GSP core and is in charge of loading, validating, and starting
the actual GSP firmware.
It is a regular binary firmware file containing a specific header.
Create a type holding the DMA-mapped firmware as well as useful
information extracted from the header, and hook it into our firmware
structure for later use.
The GSP bootloader is stored into the `GspFirmware` structure, since it
is part of the GSP firmware package. This makes the `Firmware` structure
empty, so remove it.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-8-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
The GSP firmware is a binary blob that is verified, loaded, and run by
the GSP bootloader. Its presentation is a bit peculiar as the GSP
bootloader expects to be given a DMA address to a 3-levels page table
mapping the GSP firmware at address 0 of its own address space.
Prepare such a structure containing the DMA-mapped firmware as well as
the DMA-mapped page tables, and a way to obtain the DMA handle of the
level 0 page table.
Then, move the GSP firmware instance from the `Firmware` struct to the
`start_gsp` method since it doesn't need to be kept after the GSP is
booted.
As we are performing the required ELF section parsing and radix3 page
table building, remove these items from the TODO file.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-7-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
The Booter signed firmware is an essential part of bringing up the GSP
on Turing and Ampere. It is loaded on the sec2 falcon core and is
responsible for loading and running the RISC-V GSP bootloader into the
GSP core.
Add support for parsing the Booter firmware loaded from userspace, patch
its signatures, and store it into a form that is ready to be loaded and
executed on the sec2 falcon.
Then, move the Booter instance from the `Firmware` struct to the
`start_gsp` method since it doesn't need to be kept after the GSP is
booted.
We do not run Booter yet, as its own payload (the GSP bootloader and
firmware image) still need to be prepared.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-6-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Several firmware files loaded from userspace feature a common header
that describes their payload. Add basic support for it so subsequent
patches can leverage it.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-5-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
When all the firmware files are loaded from `Firmware::new`, it makes
sense to have the firmware request code as a closure. However, since we
eventually want each individual firmware constructor to request its own
file (and get rid of `Firmware` altogether), move this code into a
dedicated function that can be called by individual firmware types.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-4-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
There are a few cases where we need the lowercase name of a given
chipset, notably to resolve firmware files paths for dynamic loading or
to build the module information.
So far, we relied on a static `NAMES` array for the latter, and some
CString hackery for the former.
Replace both with a new `name` const method that returns the lowercase
name of a chipset instance. We can generate it using the `paste!` macro.
Using this method removes the need to create a `CString` when loading
firmware, and lets us remove a couple of utility functions that now have
no user.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-3-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Right now the GSP boot code is very incomplete and limited to running
FRTS, so having it in `Gpu::new` is not a big constraint.
However, this will change as we add more steps of the GSP boot process,
and not all GPU families follow the same procedure, so having these
steps in a dedicated method is the logical construct.
There is also the fact the GSP will require its own runtime data, and
while it won't immediately need to be pinned, we want to be ready for
the time where it will - most likely when it starts using mutexes.
Thus, add an empty `Gsp` type that is pinned inside `Gpu` and
initialized using a pin initializer. This sets the constraint we need to
observe from the start, and could spare us some costly refactoring down
the road.
Then, move the code related to GSP boot to the `gsp::boot` module, as
part of the `Gsp` implementation.
Doing so allows us to make `Gpu::new` return a fallible `impl PinInit`
instead of a `Result.` This is more idiomatic when working with pinned
objects, and sets up the pinned initialization pattern we want to
preserve as the code grows more complex.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-2-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
We want to store the GSP and SEC2 falcon instances inside the `Gpu`
structure, but doing so require these types to implement `Send` for
`pci::Driver` to remain implementable on `NovaCore`, which embeds `Gpu`.
All implementors of `FalconEngine` and `FalconHal` satisfy the
requirements of `Send`, and these traits also already required `Sync`,
so this a minor tweak.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-1-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Add support for changing the filter type to the ad7173 driver.
This family of chips by default uses a sinc5+sinc1 filter. There are
also optional post-filters that can be added in this configuration for
various 50/60Hz rejection purposes. The sinc3 filter doesn't have any
post-filters and handles the output data rate (ODR) a bit differently.
Here, we've opted to use SINC3_MAPx to get the maximum possible
sampling frequencies with the SINC3 filter.
Adding support consists of adding the filter_type and
filter_type_available attributes, making the sampling_frequency
attribute aware of the filter type, and programming the filter
parameters when we configure the channel of the ADC for reading
a sample.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Rename odr to sinc5_odr_index in the channel setup structure. In a
following commit, we will be adding a separate odr field for when the
sinc3 filter is used instead so having sinc5 in the name will help
avoid confusion. And _index makes it more clear that this is an index
of the sinc5_data_rates array and not the output data rate itself.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
